-SUBDIR = src module
+######################################################################
+# Makefile Dec 2008
+#
+# UltraMonkey-L7: Linux Layer7 loadbarancer Server
+# Copyright (C) 2008 NTT COMWARE Corporation.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+# 02110-1301 USA
+#
+######################################################################
+
+SUBDIRS = logger parameter
AUTOMAKE_OPTIONS = foreign
+
--- /dev/null
+# Makefile.in generated by automake 1.9.6 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+######################################################################
+# Makefile Dec 2008
+#
+# UltraMonkey-L7: Linux Layer7 loadbarancer Server
+# Copyright (C) 2008 NTT COMWARE Corporation.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+# 02110-1301 USA
+#
+######################################################################
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = .
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = .
+DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
+ $(srcdir)/Makefile.in $(srcdir)/config.h.in \
+ $(srcdir)/l7vsd.spec.in $(top_srcdir)/configure compile \
+ config.guess config.sub depcomp install-sh ltmain.sh missing
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno configure.status.lineno
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = config.h
+CONFIG_CLEAN_FILES = l7vsd.spec
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+ { test ! -d $(distdir) \
+ || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
+ && rm -fr $(distdir); }; }
+DIST_ARCHIVES = $(distdir).tar.gz
+GZIP_ENV = --best
+distuninstallcheck_listfiles = find . -type f -print
+distcleancheck_listfiles = find . -type f -print
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
+am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build_alias = @build_alias@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host_alias = @host_alias@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+SUBDIRS = logger parameter
+AUTOMAKE_OPTIONS = foreign
+all: config.h
+ $(MAKE) $(AM_MAKEFLAGS) all-recursive
+
+.SUFFIXES:
+am--refresh:
+ @:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \
+ cd $(srcdir) && $(AUTOMAKE) --foreign \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ echo ' $(SHELL) ./config.status'; \
+ $(SHELL) ./config.status;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ $(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+
+config.h: stamp-h1
+ @if test ! -f $@; then \
+ rm -f stamp-h1; \
+ $(MAKE) stamp-h1; \
+ else :; fi
+
+stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
+ @rm -f stamp-h1
+ cd $(top_builddir) && $(SHELL) ./config.status config.h
+$(srcdir)/config.h.in: $(am__configure_deps)
+ cd $(top_srcdir) && $(AUTOHEADER)
+ rm -f stamp-h1
+ touch $@
+
+distclean-hdr:
+ -rm -f config.h stamp-h1
+l7vsd.spec: $(top_builddir)/config.status $(srcdir)/l7vsd.spec.in
+ cd $(top_builddir) && $(SHELL) ./config.status $@
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ $(am__remove_distdir)
+ mkdir $(distdir)
+ $(mkdir_p) $(distdir)/.
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+ -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
+ || chmod -R a+r $(distdir)
+dist-gzip: distdir
+ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+ $(am__remove_distdir)
+
+dist-bzip2: distdir
+ tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+ $(am__remove_distdir)
+
+dist-tarZ: distdir
+ tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+ $(am__remove_distdir)
+
+dist-shar: distdir
+ shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+ $(am__remove_distdir)
+
+dist-zip: distdir
+ -rm -f $(distdir).zip
+ zip -rq $(distdir).zip $(distdir)
+ $(am__remove_distdir)
+
+dist dist-all: distdir
+ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+ $(am__remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration. Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+ case '$(DIST_ARCHIVES)' in \
+ *.tar.gz*) \
+ GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
+ *.tar.bz2*) \
+ bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
+ *.tar.Z*) \
+ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+ *.shar.gz*) \
+ GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
+ *.zip*) \
+ unzip $(distdir).zip ;;\
+ esac
+ chmod -R a-w $(distdir); chmod a+w $(distdir)
+ mkdir $(distdir)/_build
+ mkdir $(distdir)/_inst
+ chmod a-w $(distdir)
+ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+ && cd $(distdir)/_build \
+ && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+ $(DISTCHECK_CONFIGURE_FLAGS) \
+ && $(MAKE) $(AM_MAKEFLAGS) \
+ && $(MAKE) $(AM_MAKEFLAGS) dvi \
+ && $(MAKE) $(AM_MAKEFLAGS) check \
+ && $(MAKE) $(AM_MAKEFLAGS) install \
+ && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+ && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+ distuninstallcheck \
+ && chmod -R a-w "$$dc_install_base" \
+ && ({ \
+ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+ } || { rm -rf "$$dc_destdir"; exit 1; }) \
+ && rm -rf "$$dc_destdir" \
+ && $(MAKE) $(AM_MAKEFLAGS) dist \
+ && rm -rf $(DIST_ARCHIVES) \
+ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
+ $(am__remove_distdir)
+ @(echo "$(distdir) archives ready for distribution: "; \
+ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+ sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
+distuninstallcheck:
+ @cd $(distuninstallcheck_dir) \
+ && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
+ || { echo "ERROR: files left after uninstall:" ; \
+ if test -n "$(DESTDIR)"; then \
+ echo " (check DESTDIR support)"; \
+ fi ; \
+ $(distuninstallcheck_listfiles) ; \
+ exit 1; } >&2
+distcleancheck: distclean
+ @if test '$(srcdir)' = . ; then \
+ echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+ exit 1 ; \
+ fi
+ @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+ || { echo "ERROR: files left in build directory after distclean:" ; \
+ $(distcleancheck_listfiles) ; \
+ exit 1; } >&2
+check-am: all-am
+check: check-recursive
+all-am: Makefile config.h
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-hdr distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -rf $(top_srcdir)/autom4te.cache
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \
+ check-am clean clean-generic clean-recursive ctags \
+ ctags-recursive dist dist-all dist-bzip2 dist-gzip dist-shar \
+ dist-tarZ dist-zip distcheck distclean distclean-generic \
+ distclean-hdr distclean-recursive distclean-tags \
+ distcleancheck distdir distuninstallcheck dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
--- /dev/null
+About SSLproxy
+---------------------------------------------------------------------------
+
+Welcome
+=======
+ SSLproxy is a opensource SSL proxy server software for UltraMonkey-L7.
+
+System requirements
+===================
+
+ OS : Linux 2.6.9(or later)on x86 and x86_64 architecture
+ We recommend to use Redhat Enterprise Linux.
+
+ CPU : Intel x86 and x86_64 or compatible architecture processors
+
+ Memory : 2 GB(recommended)
+
+ Libraries : openssl(0.9.8b or higher), boost(1.36.0 or higher),
+ perl, apache log4cxx(0.10 or higher)
+
+License
+=======
+
+ SSLproxy is distributed using LGPL License.
+
+
+About UltraMonkey-L7 Project
+============================
+
+ To get more information about SSLproxy, please visit our
+ UltraMonkey-L7 project Web Site.
+
+ Project Web Site - http://ultramonkey-l7.sourceforge.jp/
+ Software repository - http://sourceforge.jp/projects/ultramonkey-l7/
--- /dev/null
+# generated automatically by aclocal 1.9.6 -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005 Free Software Foundation, Inc.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+# Copyright (C) 2002, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION so it can be traced.
+# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+ [AM_AUTOMAKE_VERSION([1.9.6])])
+
+# AM_AUX_DIR_EXPAND -*- Autoconf -*-
+
+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
+# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory. The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run. This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+# fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+# fails if $ac_aux_dir is absolute,
+# fails when called from a subdirectory in a VPATH build with
+# a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir. In an in-source build this is usually
+# harmless because $srcdir is `.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
+# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+# MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH. The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[dnl Rely on autoconf to set up CDPATH properly.
+AC_PREREQ([2.50])dnl
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+])
+
+# AM_CONDITIONAL -*- Autoconf -*-
+
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 7
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ(2.52)dnl
+ ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
+ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])
+AC_SUBST([$1_FALSE])
+if $2; then
+ $1_TRUE=
+ $1_FALSE='#'
+else
+ $1_TRUE='#'
+ $1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+ AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
+fi])])
+
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 8
+
+# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery. Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "GCJ", or "OBJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
+ [$1], CXX, [depcc="$CXX" am_compiler_list=],
+ [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+ [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
+ [depcc="$$1" am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+ [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named `D' -- because `-MD' means `put the output
+ # in D'.
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_$1_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+ fi
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+ # Solaris 8's {/usr,}/bin/sh.
+ touch sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ case $depmode in
+ nosideeffect)
+ # after this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ none) break ;;
+ esac
+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle `-M -o', and we need to detect this.
+ if depmode=$depmode \
+ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_$1_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES
+AC_DEFUN([AM_SET_DEPDIR],
+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE(dependency-tracking,
+[ --disable-dependency-tracking speeds up one-time build
+ --enable-dependency-tracking do not reject slow dependency extractors])
+if test "x$enable_dependency_tracking" != xno; then
+ am_depcomp="$ac_aux_dir/depcomp"
+ AMDEPBACKSLASH='\'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])
+])
+
+# Generate code to set up dependency tracking. -*- Autoconf -*-
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+#serial 3
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[for mf in $CONFIG_FILES; do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named `Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # So let's grep whole file.
+ if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
+ dirpart=`AS_DIRNAME("$mf")`
+ else
+ continue
+ fi
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running `make'.
+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+ # When using ansi2knr, U may be empty or an underscore; expand it
+ U=`sed -n 's/^U = //p' < "$mf"`
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`AS_DIRNAME(["$file"])`
+ AS_MKDIR_P([$dirpart/$fdir])
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
+done
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking
+# is enabled. FIXME. This creates each `.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+ [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+ [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+])
+
+# Do all the work for Automake. -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 12
+
+# This macro actually does too much. Some checks are only needed if
+# your package does certain things. But this isn't really a big deal.
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out. PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition. After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_PREREQ([2.58])dnl
+dnl Autoconf wants to disallow AM_ names. We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+# test to see if srcdir already configured
+if test "`cd $srcdir && pwd`" != "`pwd`" &&
+ test -f $srcdir/config.status; then
+ AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+ if (cygpath --version) >/dev/null 2>/dev/null; then
+ CYGPATH_W='cygpath -w'
+ else
+ CYGPATH_W=echo
+ fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
+AM_MISSING_PROG(AUTOCONF, autoconf)
+AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
+AM_MISSING_PROG(AUTOHEADER, autoheader)
+AM_MISSING_PROG(MAKEINFO, makeinfo)
+AM_PROG_INSTALL_SH
+AM_PROG_INSTALL_STRIP
+AC_REQUIRE([AM_PROG_MKDIR_P])dnl
+# We need awk for the "check" target. The system "awk" is bad on
+# some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+ [_AM_PROG_TAR([v7])])])
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+ [_AM_DEPENDENCIES(CC)],
+ [define([AC_PROG_CC],
+ defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+ [_AM_DEPENDENCIES(CXX)],
+ [define([AC_PROG_CXX],
+ defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+])
+])
+
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated. The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+ case $_am_header in
+ $1 | $1:* )
+ break ;;
+ * )
+ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+ esac
+done
+echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
+
+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+install_sh=${install_sh-"$am_aux_dir/install-sh"}
+AC_SUBST(install_sh)])
+
+# Copyright (C) 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# Check whether the underlying file-system supports filenames
+# with a leading dot. For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+ am__leading_dot=.
+else
+ am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+
+# Check to see how 'make' treats includes. -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 3
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+ @echo done
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# We grep out `Entering directory' and `Leaving directory'
+# messages which can occur if `w' ends up in MAKEFLAGS.
+# In particular we don't look at `^make:' because GNU make might
+# be invoked under some other name (usually "gmake"), in which
+# case it prints its new name instead of `make'.
+if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
+ am__include=include
+ am__quote=
+ _am_result=GNU
+fi
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+ echo '.include "confinc"' > confmf
+ if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ fi
+fi
+AC_SUBST([am__include])
+AC_SUBST([am__quote])
+AC_MSG_RESULT([$_am_result])
+rm -f confinc confmf
+])
+
+# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
+
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it supports --run.
+# If it does, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+ am_missing_run="$MISSING --run "
+else
+ am_missing_run=
+ AC_MSG_WARN([`missing' script is too old or missing])
+fi
+])
+
+# Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_MKDIR_P
+# ---------------
+# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise.
+#
+# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories
+# created by `make install' are always world readable, even if the
+# installer happens to have an overly restrictive umask (e.g. 077).
+# This was a mistake. There are at least two reasons why we must not
+# use `-m 0755':
+# - it causes special bits like SGID to be ignored,
+# - it may be too restrictive (some setups expect 775 directories).
+#
+# Do not use -m 0755 and let people choose whatever they expect by
+# setting umask.
+#
+# We cannot accept any implementation of `mkdir' that recognizes `-p'.
+# Some implementations (such as Solaris 8's) are not thread-safe: if a
+# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c'
+# concurrently, both version can detect that a/ is missing, but only
+# one can create it and the other will error out. Consequently we
+# restrict ourselves to GNU make (using the --version option ensures
+# this.)
+AC_DEFUN([AM_PROG_MKDIR_P],
+[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
+ # We used to keeping the `.' as first argument, in order to
+ # allow $(mkdir_p) to be used without argument. As in
+ # $(mkdir_p) $(somedir)
+ # where $(somedir) is conditionally defined. However this is wrong
+ # for two reasons:
+ # 1. if the package is installed by a user who cannot write `.'
+ # make install will fail,
+ # 2. the above comment should most certainly read
+ # $(mkdir_p) $(DESTDIR)$(somedir)
+ # so it does not work when $(somedir) is undefined and
+ # $(DESTDIR) is not.
+ # To support the latter case, we have to write
+ # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
+ # so the `.' trick is pointless.
+ mkdir_p='mkdir -p --'
+else
+ # On NextStep and OpenStep, the `mkdir' command does not
+ # recognize any option. It will interpret all options as
+ # directories to create, and then abort because `.' already
+ # exists.
+ for d in ./-p ./--version;
+ do
+ test -d $d && rmdir $d
+ done
+ # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
+ if test -f "$ac_aux_dir/mkinstalldirs"; then
+ mkdir_p='$(mkinstalldirs)'
+ else
+ mkdir_p='$(install_sh) -d'
+ fi
+fi
+AC_SUBST([mkdir_p])])
+
+# Helper functions for option handling. -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 3
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# ------------------------------
+# Set option NAME. Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ----------------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+# Check to make sure that the build environment is sane. -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+ if test "$[*]" = "X"; then
+ # -L didn't work.
+ set X `ls -t $srcdir/configure conftest.file`
+ fi
+ rm -f conftest.file
+ if test "$[*]" != "X $srcdir/configure conftest.file" \
+ && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
+alias in your environment])
+ fi
+
+ test "$[2]" = conftest.file
+ )
+then
+ # Ok.
+ :
+else
+ AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT(yes)])
+
+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_STRIP
+# ---------------------
+# One issue with vendor `install' (even GNU) is that you can't
+# specify the program used to strip binaries. This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in `make install-strip', and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'. However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
+if test "$cross_compiling" != no; then
+ AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# Check how to create a tarball. -*- Autoconf -*-
+
+# Copyright (C) 2004, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of `v7', `ustar', or `pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+# tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+# $(am__untar) < result.tar
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility.
+AM_MISSING_PROG([AMTAR], [tar])
+m4_if([$1], [v7],
+ [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
+ [m4_case([$1], [ustar],, [pax],,
+ [m4_fatal([Unknown tar format])])
+AC_MSG_CHECKING([how to create a $1 tar archive])
+# Loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+_am_tools=${am_cv_prog_tar_$1-$_am_tools}
+# Do not fold the above two line into one, because Tru64 sh and
+# Solaris sh will not grok spaces in the rhs of `-'.
+for _am_tool in $_am_tools
+do
+ case $_am_tool in
+ gnutar)
+ for _am_tar in tar gnutar gtar;
+ do
+ AM_RUN_LOG([$_am_tar --version]) && break
+ done
+ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+ am__untar="$_am_tar -xf -"
+ ;;
+ plaintar)
+ # Must skip GNU tar: if it does not support --format= it doesn't create
+ # ustar tarball either.
+ (tar --version) >/dev/null 2>&1 && continue
+ am__tar='tar chf - "$$tardir"'
+ am__tar_='tar chf - "$tardir"'
+ am__untar='tar xf -'
+ ;;
+ pax)
+ am__tar='pax -L -x $1 -w "$$tardir"'
+ am__tar_='pax -L -x $1 -w "$tardir"'
+ am__untar='pax -r'
+ ;;
+ cpio)
+ am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+ am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+ am__untar='cpio -i -H $1 -d'
+ ;;
+ none)
+ am__tar=false
+ am__tar_=false
+ am__untar=false
+ ;;
+ esac
+
+ # If the value was cached, stop now. We just wanted to have am__tar
+ # and am__untar set.
+ test -n "${am_cv_prog_tar_$1}" && break
+
+ # tar/untar a dummy directory, and stop if the command works
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ echo GrepMe > conftest.dir/file
+ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+ rm -rf conftest.dir
+ if test -s conftest.tar; then
+ AM_RUN_LOG([$am__untar <conftest.tar])
+ grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+ fi
+done
+rm -rf conftest.dir
+
+AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
--- /dev/null
+#! /bin/sh
+# Wrapper for compilers which do not understand `-c -o'.
+
+scriptversion=2005-05-14.22
+
+# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
+# Written by Tom Tromey <tromey@cygnus.com>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+case $1 in
+ '')
+ echo "$0: No command. Try \`$0 --help' for more information." 1>&2
+ exit 1;
+ ;;
+ -h | --h*)
+ cat <<\EOF
+Usage: compile [--help] [--version] PROGRAM [ARGS]
+
+Wrapper for compilers which do not understand `-c -o'.
+Remove `-o dest.o' from ARGS, run PROGRAM with the remaining
+arguments, and rename the output as expected.
+
+If you are trying to build a whole package this is not the
+right script to run: please start by reading the file `INSTALL'.
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+ exit $?
+ ;;
+ -v | --v*)
+ echo "compile $scriptversion"
+ exit $?
+ ;;
+esac
+
+ofile=
+cfile=
+eat=
+
+for arg
+do
+ if test -n "$eat"; then
+ eat=
+ else
+ case $1 in
+ -o)
+ # configure might choose to run compile as `compile cc -o foo foo.c'.
+ # So we strip `-o arg' only if arg is an object.
+ eat=1
+ case $2 in
+ *.o | *.obj)
+ ofile=$2
+ ;;
+ *)
+ set x "$@" -o "$2"
+ shift
+ ;;
+ esac
+ ;;
+ *.c)
+ cfile=$1
+ set x "$@" "$1"
+ shift
+ ;;
+ *)
+ set x "$@" "$1"
+ shift
+ ;;
+ esac
+ fi
+ shift
+done
+
+if test -z "$ofile" || test -z "$cfile"; then
+ # If no `-o' option was seen then we might have been invoked from a
+ # pattern rule where we don't need one. That is ok -- this is a
+ # normal compilation that the losing compiler can handle. If no
+ # `.c' file was seen then we are probably linking. That is also
+ # ok.
+ exec "$@"
+fi
+
+# Name of file we expect compiler to create.
+cofile=`echo "$cfile" | sed -e 's|^.*/||' -e 's/\.c$/.o/'`
+
+# Create the lock directory.
+# Note: use `[/.-]' here to ensure that we don't use the same name
+# that we are using for the .o file. Also, base the name on the expected
+# object file name, since that is what matters with a parallel build.
+lockdir=`echo "$cofile" | sed -e 's|[/.-]|_|g'`.d
+while true; do
+ if mkdir "$lockdir" >/dev/null 2>&1; then
+ break
+ fi
+ sleep 1
+done
+# FIXME: race condition here if user kills between mkdir and trap.
+trap "rmdir '$lockdir'; exit 1" 1 2 15
+
+# Run the compile.
+"$@"
+ret=$?
+
+if test -f "$cofile"; then
+ mv "$cofile" "$ofile"
+elif test -f "${cofile}bj"; then
+ mv "${cofile}bj" "$ofile"
+fi
+
+rmdir "$lockdir"
+exit $ret
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
--- /dev/null
+/* config.h.in. Generated from configure.in by autoheader. */
+
+/* Define to 1 if you have the `alarm' function. */
+#undef HAVE_ALARM
+
+/* Define to 1 if you have the `gethostname' function. */
+#undef HAVE_GETHOSTNAME
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#undef HAVE_INTTYPES_H
+
+/* Define to 1 if you have the <limits.h> header file. */
+#undef HAVE_LIMITS_H
+
+/* Define to 1 if you have the `localtime_r' function. */
+#undef HAVE_LOCALTIME_R
+
+/* Define to 1 if you have the <memory.h> header file. */
+#undef HAVE_MEMORY_H
+
+/* Define to 1 if you have the `memset' function. */
+#undef HAVE_MEMSET
+
+/* Define to 1 if stdbool.h conforms to C99. */
+#undef HAVE_STDBOOL_H
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#undef HAVE_STDINT_H
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H
+
+/* Define to 1 if you have the `strftime' function. */
+#undef HAVE_STRFTIME
+
+/* Define to 1 if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H
+
+/* Define to 1 if you have the <string.h> header file. */
+#undef HAVE_STRING_H
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define to 1 if you have the <sys/time.h> header file. */
+#undef HAVE_SYS_TIME_H
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H
+
+/* Define to 1 if the system has the type `_Bool'. */
+#undef HAVE__BOOL
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* Define to 1 if you have the ANSI C header files. */
+#undef STDC_HEADERS
+
+/* Define to 1 if you can safely include both <sys/time.h> and <time.h>. */
+#undef TIME_WITH_SYS_TIME
+
+/* Define to 1 if your <sys/time.h> declares `struct tm'. */
+#undef TM_IN_SYS_TIME
+
+/* Define to empty if `const' does not conform to ANSI C. */
+#undef const
+
+/* Define to `__inline__' or `__inline' if that's what the C compiler
+ calls it, or to nothing if 'inline' is not supported under any name. */
+#ifndef __cplusplus
+#undef inline
+#endif
+
+/* Define to `unsigned' if <sys/types.h> does not define. */
+#undef size_t
--- /dev/null
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.59.
+#
+# Copyright (C) 2003 Free Software Foundation, Inc.
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## --------------------- ##
+## M4sh Initialization. ##
+## --------------------- ##
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
+ set -o posix
+fi
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# Support unset when possible.
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ as_unset=unset
+else
+ as_unset=false
+fi
+
+
+# Work around bugs in pre-3.0 UWIN ksh.
+$as_unset ENV MAIL MAILPATH
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+for as_var in \
+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+ LC_TELEPHONE LC_TIME
+do
+ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
+ eval $as_var=C; export $as_var
+ else
+ $as_unset $as_var
+ fi
+done
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+
+# Name of the executable.
+as_me=`$as_basename "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)$' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
+ /^X\/\(\/\/\)$/{ s//\1/; q; }
+ /^X\/\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+
+
+# PATH needs CR, and LINENO needs CR and PATH.
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+
+
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x$as_lineno_3" = "x$as_lineno_2" || {
+ # Find who we are. Look in the path if we contain no path at all
+ # relative or not.
+ case $0 in
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+
+ ;;
+ esac
+ # We did not find ourselves, most probably we were run as `sh COMMAND'
+ # in which case we are not to be found in the path.
+ if test "x$as_myself" = x; then
+ as_myself=$0
+ fi
+ if test ! -f "$as_myself"; then
+ { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
+ { (exit 1); exit 1; }; }
+ fi
+ case $CONFIG_SHELL in
+ '')
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for as_base in sh bash ksh sh5; do
+ case $as_dir in
+ /*)
+ if ("$as_dir/$as_base" -c '
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
+ $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
+ $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
+ CONFIG_SHELL=$as_dir/$as_base
+ export CONFIG_SHELL
+ exec "$CONFIG_SHELL" "$0" ${1+"$@"}
+ fi;;
+ esac
+ done
+done
+;;
+ esac
+
+ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
+ # uniformly replaced by the line number. The first 'sed' inserts a
+ # line-number line before each line; the second 'sed' does the real
+ # work. The second script uses 'N' to pair each line-number line
+ # with the numbered line, and appends trailing '-' during
+ # substitution so that $LINENO is not a special case at line end.
+ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
+ # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
+ sed '=' <$as_myself |
+ sed '
+ N
+ s,$,-,
+ : loop
+ s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+ t loop
+ s,-$,,
+ s,^['$as_cr_digits']*\n,,
+ ' >$as_me.lineno &&
+ chmod +x $as_me.lineno ||
+ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+ { (exit 1); exit 1; }; }
+
+ # Don't try to exec as it changes $[0], causing all sort of problems
+ # (the dirname of $[0] is not the place where we might find the
+ # original and so on. Autoconf is especially sensible to this).
+ . ./$as_me.lineno
+ # Exit status is that of the last command.
+ exit
+}
+
+
+case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
+ *c*,-n*) ECHO_N= ECHO_C='
+' ECHO_T=' ' ;;
+ *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
+ *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
+esac
+
+if expr a : '\(a\)' >/dev/null 2>&1; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+rm -f conf$$ conf$$.exe conf$$.file
+echo >conf$$.file
+if ln -s conf$$.file conf$$ 2>/dev/null; then
+ # We could just check for DJGPP; but this test a) works b) is more generic
+ # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
+ if test -f conf$$.exe; then
+ # Don't use ln at all; we don't have any links
+ as_ln_s='cp -p'
+ else
+ as_ln_s='ln -s'
+ fi
+elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+else
+ as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.file
+
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p=:
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+as_executable_p="test -f"
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.
+as_nl='
+'
+IFS=" $as_nl"
+
+# CDPATH.
+$as_unset CDPATH
+
+
+# Name of the host.
+# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+exec 6>&1
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_config_libobj_dir=.
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+# Maximum number of lines to put in a shell here document.
+# This variable seems obsolete. It should probably be removed, and
+# only ac_max_sed_lines should be used.
+: ${ac_max_here_lines=38}
+
+# Identity of this package.
+PACKAGE_NAME=
+PACKAGE_TARNAME=
+PACKAGE_VERSION=
+PACKAGE_STRING=
+PACKAGE_BUGREPORT=
+
+ac_unique_file="l7vsd"
+ac_unique_file="config.h.in"
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include <stdio.h>
+#if HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#if HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#if STDC_HEADERS
+# include <stdlib.h>
+# include <stddef.h>
+#else
+# if HAVE_STDLIB_H
+# include <stdlib.h>
+# endif
+#endif
+#if HAVE_STRING_H
+# if !STDC_HEADERS && HAVE_MEMORY_H
+# include <memory.h>
+# endif
+# include <string.h>
+#endif
+#if HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#if HAVE_INTTYPES_H
+# include <inttypes.h>
+#else
+# if HAVE_STDINT_H
+# include <stdint.h>
+# endif
+#endif
+#if HAVE_UNISTD_H
+# include <unistd.h>
+#endif"
+
+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar CXX CXXFLAGS LDFLAGS CPPFLAGS ac_ct_CXX EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CXXDEPMODE am__fastdepCXX_TRUE am__fastdepCXX_FALSE CC CFLAGS ac_ct_CC CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE CPP LN_S RANLIB ac_ct_RANLIB EGREP LIBOBJS LTLIBOBJS'
+ac_subst_files=''
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datadir='${prefix}/share'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+libdir='${exec_prefix}/lib'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+infodir='${prefix}/info'
+mandir='${prefix}/man'
+
+ac_prev=
+for ac_option
+do
+ # If the previous option needs an argument, assign it.
+ if test -n "$ac_prev"; then
+ eval "$ac_prev=\$ac_option"
+ ac_prev=
+ continue
+ fi
+
+ ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
+
+ # Accept the important Cygnus configure options, so we can diagnose typos.
+
+ case $ac_option in
+
+ -bindir | --bindir | --bindi | --bind | --bin | --bi)
+ ac_prev=bindir ;;
+ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+ bindir=$ac_optarg ;;
+
+ -build | --build | --buil | --bui | --bu)
+ ac_prev=build_alias ;;
+ -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+ build_alias=$ac_optarg ;;
+
+ -cache-file | --cache-file | --cache-fil | --cache-fi \
+ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+ ac_prev=cache_file ;;
+ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+ cache_file=$ac_optarg ;;
+
+ --config-cache | -C)
+ cache_file=config.cache ;;
+
+ -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+ ac_prev=datadir ;;
+ -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
+ | --da=*)
+ datadir=$ac_optarg ;;
+
+ -disable-* | --disable-*)
+ ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+ { (exit 1); exit 1; }; }
+ ac_feature=`echo $ac_feature | sed 's/-/_/g'`
+ eval "enable_$ac_feature=no" ;;
+
+ -enable-* | --enable-*)
+ ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+ { (exit 1); exit 1; }; }
+ ac_feature=`echo $ac_feature | sed 's/-/_/g'`
+ case $ac_option in
+ *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) ac_optarg=yes ;;
+ esac
+ eval "enable_$ac_feature='$ac_optarg'" ;;
+
+ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+ | --exec | --exe | --ex)
+ ac_prev=exec_prefix ;;
+ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+ | --exec=* | --exe=* | --ex=*)
+ exec_prefix=$ac_optarg ;;
+
+ -gas | --gas | --ga | --g)
+ # Obsolete; use --with-gas.
+ with_gas=yes ;;
+
+ -help | --help | --hel | --he | -h)
+ ac_init_help=long ;;
+ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+ ac_init_help=recursive ;;
+ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+ ac_init_help=short ;;
+
+ -host | --host | --hos | --ho)
+ ac_prev=host_alias ;;
+ -host=* | --host=* | --hos=* | --ho=*)
+ host_alias=$ac_optarg ;;
+
+ -includedir | --includedir | --includedi | --included | --include \
+ | --includ | --inclu | --incl | --inc)
+ ac_prev=includedir ;;
+ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+ | --includ=* | --inclu=* | --incl=* | --inc=*)
+ includedir=$ac_optarg ;;
+
+ -infodir | --infodir | --infodi | --infod | --info | --inf)
+ ac_prev=infodir ;;
+ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+ infodir=$ac_optarg ;;
+
+ -libdir | --libdir | --libdi | --libd)
+ ac_prev=libdir ;;
+ -libdir=* | --libdir=* | --libdi=* | --libd=*)
+ libdir=$ac_optarg ;;
+
+ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+ | --libexe | --libex | --libe)
+ ac_prev=libexecdir ;;
+ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+ | --libexe=* | --libex=* | --libe=*)
+ libexecdir=$ac_optarg ;;
+
+ -localstatedir | --localstatedir | --localstatedi | --localstated \
+ | --localstate | --localstat | --localsta | --localst \
+ | --locals | --local | --loca | --loc | --lo)
+ ac_prev=localstatedir ;;
+ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+ | --localstate=* | --localstat=* | --localsta=* | --localst=* \
+ | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+ localstatedir=$ac_optarg ;;
+
+ -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+ ac_prev=mandir ;;
+ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+ mandir=$ac_optarg ;;
+
+ -nfp | --nfp | --nf)
+ # Obsolete; use --without-fp.
+ with_fp=no ;;
+
+ -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+ | --no-cr | --no-c | -n)
+ no_create=yes ;;
+
+ -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+ no_recursion=yes ;;
+
+ -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+ | --oldin | --oldi | --old | --ol | --o)
+ ac_prev=oldincludedir ;;
+ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+ oldincludedir=$ac_optarg ;;
+
+ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+ ac_prev=prefix ;;
+ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+ prefix=$ac_optarg ;;
+
+ -program-prefix | --program-prefix | --program-prefi | --program-pref \
+ | --program-pre | --program-pr | --program-p)
+ ac_prev=program_prefix ;;
+ -program-prefix=* | --program-prefix=* | --program-prefi=* \
+ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+ program_prefix=$ac_optarg ;;
+
+ -program-suffix | --program-suffix | --program-suffi | --program-suff \
+ | --program-suf | --program-su | --program-s)
+ ac_prev=program_suffix ;;
+ -program-suffix=* | --program-suffix=* | --program-suffi=* \
+ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+ program_suffix=$ac_optarg ;;
+
+ -program-transform-name | --program-transform-name \
+ | --program-transform-nam | --program-transform-na \
+ | --program-transform-n | --program-transform- \
+ | --program-transform | --program-transfor \
+ | --program-transfo | --program-transf \
+ | --program-trans | --program-tran \
+ | --progr-tra | --program-tr | --program-t)
+ ac_prev=program_transform_name ;;
+ -program-transform-name=* | --program-transform-name=* \
+ | --program-transform-nam=* | --program-transform-na=* \
+ | --program-transform-n=* | --program-transform-=* \
+ | --program-transform=* | --program-transfor=* \
+ | --program-transfo=* | --program-transf=* \
+ | --program-trans=* | --program-tran=* \
+ | --progr-tra=* | --program-tr=* | --program-t=*)
+ program_transform_name=$ac_optarg ;;
+
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ silent=yes ;;
+
+ -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+ ac_prev=sbindir ;;
+ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+ | --sbi=* | --sb=*)
+ sbindir=$ac_optarg ;;
+
+ -sharedstatedir | --sharedstatedir | --sharedstatedi \
+ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+ | --sharedst | --shareds | --shared | --share | --shar \
+ | --sha | --sh)
+ ac_prev=sharedstatedir ;;
+ -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+ | --sha=* | --sh=*)
+ sharedstatedir=$ac_optarg ;;
+
+ -site | --site | --sit)
+ ac_prev=site ;;
+ -site=* | --site=* | --sit=*)
+ site=$ac_optarg ;;
+
+ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+ ac_prev=srcdir ;;
+ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+ srcdir=$ac_optarg ;;
+
+ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+ | --syscon | --sysco | --sysc | --sys | --sy)
+ ac_prev=sysconfdir ;;
+ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+ sysconfdir=$ac_optarg ;;
+
+ -target | --target | --targe | --targ | --tar | --ta | --t)
+ ac_prev=target_alias ;;
+ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+ target_alias=$ac_optarg ;;
+
+ -v | -verbose | --verbose | --verbos | --verbo | --verb)
+ verbose=yes ;;
+
+ -version | --version | --versio | --versi | --vers | -V)
+ ac_init_version=: ;;
+
+ -with-* | --with-*)
+ ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid package name: $ac_package" >&2
+ { (exit 1); exit 1; }; }
+ ac_package=`echo $ac_package| sed 's/-/_/g'`
+ case $ac_option in
+ *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) ac_optarg=yes ;;
+ esac
+ eval "with_$ac_package='$ac_optarg'" ;;
+
+ -without-* | --without-*)
+ ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid package name: $ac_package" >&2
+ { (exit 1); exit 1; }; }
+ ac_package=`echo $ac_package | sed 's/-/_/g'`
+ eval "with_$ac_package=no" ;;
+
+ --x)
+ # Obsolete; use --with-x.
+ with_x=yes ;;
+
+ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+ | --x-incl | --x-inc | --x-in | --x-i)
+ ac_prev=x_includes ;;
+ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+ x_includes=$ac_optarg ;;
+
+ -x-libraries | --x-libraries | --x-librarie | --x-librari \
+ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+ ac_prev=x_libraries ;;
+ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+ x_libraries=$ac_optarg ;;
+
+ -*) { echo "$as_me: error: unrecognized option: $ac_option
+Try \`$0 --help' for more information." >&2
+ { (exit 1); exit 1; }; }
+ ;;
+
+ *=*)
+ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
+ { (exit 1); exit 1; }; }
+ ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
+ eval "$ac_envvar='$ac_optarg'"
+ export $ac_envvar ;;
+
+ *)
+ # FIXME: should be removed in autoconf 3.0.
+ echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+ : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
+ ;;
+
+ esac
+done
+
+if test -n "$ac_prev"; then
+ ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+ { echo "$as_me: error: missing argument to $ac_option" >&2
+ { (exit 1); exit 1; }; }
+fi
+
+# Be sure to have absolute paths.
+for ac_var in exec_prefix prefix
+do
+ eval ac_val=$`echo $ac_var`
+ case $ac_val in
+ [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
+ *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+ { (exit 1); exit 1; }; };;
+ esac
+done
+
+# Be sure to have absolute paths.
+for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
+ localstatedir libdir includedir oldincludedir infodir mandir
+do
+ eval ac_val=$`echo $ac_var`
+ case $ac_val in
+ [\\/$]* | ?:[\\/]* ) ;;
+ *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+ { (exit 1); exit 1; }; };;
+ esac
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+ if test "x$build_alias" = x; then
+ cross_compiling=maybe
+ echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
+ If a cross compiler is detected then cross compile mode will be used." >&2
+ elif test "x$build_alias" != "x$host_alias"; then
+ cross_compiling=yes
+ fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+ ac_srcdir_defaulted=yes
+ # Try the directory containing this script, then its parent.
+ ac_confdir=`(dirname "$0") 2>/dev/null ||
+$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$0" : 'X\(//\)[^/]' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$0" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ srcdir=$ac_confdir
+ if test ! -r $srcdir/$ac_unique_file; then
+ srcdir=..
+ fi
+else
+ ac_srcdir_defaulted=no
+fi
+if test ! -r $srcdir/$ac_unique_file; then
+ if test "$ac_srcdir_defaulted" = yes; then
+ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
+ { (exit 1); exit 1; }; }
+ else
+ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
+ { (exit 1); exit 1; }; }
+ fi
+fi
+(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
+ { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
+ { (exit 1); exit 1; }; }
+srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
+ac_env_build_alias_set=${build_alias+set}
+ac_env_build_alias_value=$build_alias
+ac_cv_env_build_alias_set=${build_alias+set}
+ac_cv_env_build_alias_value=$build_alias
+ac_env_host_alias_set=${host_alias+set}
+ac_env_host_alias_value=$host_alias
+ac_cv_env_host_alias_set=${host_alias+set}
+ac_cv_env_host_alias_value=$host_alias
+ac_env_target_alias_set=${target_alias+set}
+ac_env_target_alias_value=$target_alias
+ac_cv_env_target_alias_set=${target_alias+set}
+ac_cv_env_target_alias_value=$target_alias
+ac_env_CXX_set=${CXX+set}
+ac_env_CXX_value=$CXX
+ac_cv_env_CXX_set=${CXX+set}
+ac_cv_env_CXX_value=$CXX
+ac_env_CXXFLAGS_set=${CXXFLAGS+set}
+ac_env_CXXFLAGS_value=$CXXFLAGS
+ac_cv_env_CXXFLAGS_set=${CXXFLAGS+set}
+ac_cv_env_CXXFLAGS_value=$CXXFLAGS
+ac_env_LDFLAGS_set=${LDFLAGS+set}
+ac_env_LDFLAGS_value=$LDFLAGS
+ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
+ac_cv_env_LDFLAGS_value=$LDFLAGS
+ac_env_CPPFLAGS_set=${CPPFLAGS+set}
+ac_env_CPPFLAGS_value=$CPPFLAGS
+ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
+ac_cv_env_CPPFLAGS_value=$CPPFLAGS
+ac_env_CC_set=${CC+set}
+ac_env_CC_value=$CC
+ac_cv_env_CC_set=${CC+set}
+ac_cv_env_CC_value=$CC
+ac_env_CFLAGS_set=${CFLAGS+set}
+ac_env_CFLAGS_value=$CFLAGS
+ac_cv_env_CFLAGS_set=${CFLAGS+set}
+ac_cv_env_CFLAGS_value=$CFLAGS
+ac_env_CPP_set=${CPP+set}
+ac_env_CPP_value=$CPP
+ac_cv_env_CPP_set=${CPP+set}
+ac_cv_env_CPP_value=$CPP
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+ # Omit some internal or obsolete options to make the list less imposing.
+ # This message is too long to be a string in the A/UX 3.1 sh.
+ cat <<_ACEOF
+\`configure' configures this package to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE. See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+ -h, --help display this help and exit
+ --help=short display options specific to this package
+ --help=recursive display the short help of all the included packages
+ -V, --version display version information and exit
+ -q, --quiet, --silent do not print \`checking...' messages
+ --cache-file=FILE cache test results in FILE [disabled]
+ -C, --config-cache alias for \`--cache-file=config.cache'
+ -n, --no-create do not create output files
+ --srcdir=DIR find the sources in DIR [configure dir or \`..']
+
+_ACEOF
+
+ cat <<_ACEOF
+Installation directories:
+ --prefix=PREFIX install architecture-independent files in PREFIX
+ [$ac_default_prefix]
+ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
+ [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+ --bindir=DIR user executables [EPREFIX/bin]
+ --sbindir=DIR system admin executables [EPREFIX/sbin]
+ --libexecdir=DIR program executables [EPREFIX/libexec]
+ --datadir=DIR read-only architecture-independent data [PREFIX/share]
+ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
+ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
+ --localstatedir=DIR modifiable single-machine data [PREFIX/var]
+ --libdir=DIR object code libraries [EPREFIX/lib]
+ --includedir=DIR C header files [PREFIX/include]
+ --oldincludedir=DIR C header files for non-gcc [/usr/include]
+ --infodir=DIR info documentation [PREFIX/info]
+ --mandir=DIR man documentation [PREFIX/man]
+_ACEOF
+
+ cat <<\_ACEOF
+
+Program names:
+ --program-prefix=PREFIX prepend PREFIX to installed program names
+ --program-suffix=SUFFIX append SUFFIX to installed program names
+ --program-transform-name=PROGRAM run sed PROGRAM on installed program names
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+
+ cat <<\_ACEOF
+
+Optional Features:
+ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
+ --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
+ --disable-dependency-tracking speeds up one-time build
+ --enable-dependency-tracking do not reject slow dependency extractors
+
+Some influential environment variables:
+ CXX C++ compiler command
+ CXXFLAGS C++ compiler flags
+ LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
+ nonstandard directory <lib dir>
+ CPPFLAGS C/C++ preprocessor flags, e.g. -I<include dir> if you have
+ headers in a nonstandard directory <include dir>
+ CC C compiler command
+ CFLAGS C compiler flags
+ CPP C preprocessor
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+_ACEOF
+fi
+
+if test "$ac_init_help" = "recursive"; then
+ # If there are subdirs, report their specific --help.
+ ac_popdir=`pwd`
+ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+ test -d $ac_dir || continue
+ ac_builddir=.
+
+if test "$ac_dir" != .; then
+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+ # A "../" for each directory in $ac_dir_suffix.
+ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
+else
+ ac_dir_suffix= ac_top_builddir=
+fi
+
+case $srcdir in
+ .) # No --srcdir option. We are building in place.
+ ac_srcdir=.
+ if test -z "$ac_top_builddir"; then
+ ac_top_srcdir=.
+ else
+ ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
+ fi ;;
+ [\\/]* | ?:[\\/]* ) # Absolute path.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir ;;
+ *) # Relative path.
+ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_builddir$srcdir ;;
+esac
+
+# Do not use `cd foo && pwd` to compute absolute paths, because
+# the directories may not exist.
+case `pwd` in
+.) ac_abs_builddir="$ac_dir";;
+*)
+ case "$ac_dir" in
+ .) ac_abs_builddir=`pwd`;;
+ [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
+ *) ac_abs_builddir=`pwd`/"$ac_dir";;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_builddir=${ac_top_builddir}.;;
+*)
+ case ${ac_top_builddir}. in
+ .) ac_abs_top_builddir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
+ *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_srcdir=$ac_srcdir;;
+*)
+ case $ac_srcdir in
+ .) ac_abs_srcdir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
+ *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_srcdir=$ac_top_srcdir;;
+*)
+ case $ac_top_srcdir in
+ .) ac_abs_top_srcdir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
+ *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
+ esac;;
+esac
+
+ cd $ac_dir
+ # Check for guested configure; otherwise get Cygnus style configure.
+ if test -f $ac_srcdir/configure.gnu; then
+ echo
+ $SHELL $ac_srcdir/configure.gnu --help=recursive
+ elif test -f $ac_srcdir/configure; then
+ echo
+ $SHELL $ac_srcdir/configure --help=recursive
+ elif test -f $ac_srcdir/configure.ac ||
+ test -f $ac_srcdir/configure.in; then
+ echo
+ $ac_configure --help
+ else
+ echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+ fi
+ cd $ac_popdir
+ done
+fi
+
+test -n "$ac_init_help" && exit 0
+if $ac_init_version; then
+ cat <<\_ACEOF
+
+Copyright (C) 2003 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+ exit 0
+fi
+exec 5>config.log
+cat >&5 <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by $as_me, which was
+generated by GNU Autoconf 2.59. Invocation command line was
+
+ $ $0 $@
+
+_ACEOF
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
+
+/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+hostinfo = `(hostinfo) 2>/dev/null || echo unknown`
+/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
+/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ echo "PATH: $as_dir"
+done
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_sep=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+ for ac_arg
+ do
+ case $ac_arg in
+ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ continue ;;
+ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
+ ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ case $ac_pass in
+ 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
+ 2)
+ ac_configure_args1="$ac_configure_args1 '$ac_arg'"
+ if test $ac_must_keep_next = true; then
+ ac_must_keep_next=false # Got value, back to normal.
+ else
+ case $ac_arg in
+ *=* | --config-cache | -C | -disable-* | --disable-* \
+ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+ | -with-* | --with-* | -without-* | --without-* | --x)
+ case "$ac_configure_args0 " in
+ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+ esac
+ ;;
+ -* ) ac_must_keep_next=true ;;
+ esac
+ fi
+ ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
+ # Get rid of the leading space.
+ ac_sep=" "
+ ;;
+ esac
+ done
+done
+$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
+$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log. We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Be sure not to use single quotes in there, as some shells,
+# such as our DU 5.0 friend, will then `close' the trap.
+trap 'exit_status=$?
+ # Save into config.log some information that might help in debugging.
+ {
+ echo
+
+ cat <<\_ASBOX
+## ---------------- ##
+## Cache variables. ##
+## ---------------- ##
+_ASBOX
+ echo
+ # The following way of writing the cache mishandles newlines in values,
+{
+ (set) 2>&1 |
+ case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
+ *ac_space=\ *)
+ sed -n \
+ "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
+ ;;
+ *)
+ sed -n \
+ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+ ;;
+ esac;
+}
+ echo
+
+ cat <<\_ASBOX
+## ----------------- ##
+## Output variables. ##
+## ----------------- ##
+_ASBOX
+ echo
+ for ac_var in $ac_subst_vars
+ do
+ eval ac_val=$`echo $ac_var`
+ echo "$ac_var='"'"'$ac_val'"'"'"
+ done | sort
+ echo
+
+ if test -n "$ac_subst_files"; then
+ cat <<\_ASBOX
+## ------------- ##
+## Output files. ##
+## ------------- ##
+_ASBOX
+ echo
+ for ac_var in $ac_subst_files
+ do
+ eval ac_val=$`echo $ac_var`
+ echo "$ac_var='"'"'$ac_val'"'"'"
+ done | sort
+ echo
+ fi
+
+ if test -s confdefs.h; then
+ cat <<\_ASBOX
+## ----------- ##
+## confdefs.h. ##
+## ----------- ##
+_ASBOX
+ echo
+ sed "/^$/d" confdefs.h | sort
+ echo
+ fi
+ test "$ac_signal" != 0 &&
+ echo "$as_me: caught signal $ac_signal"
+ echo "$as_me: exit $exit_status"
+ } >&5
+ rm -f core *.core &&
+ rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
+ exit $exit_status
+ ' 0
+for ac_signal in 1 2 13 15; do
+ trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -rf conftest* confdefs.h
+# AIX cpp loses on an empty file, so make sure it contains at least a newline.
+echo >confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer explicitly selected file to automatically selected ones.
+if test -z "$CONFIG_SITE"; then
+ if test "x$prefix" != xNONE; then
+ CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+ else
+ CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+ fi
+fi
+for ac_site_file in $CONFIG_SITE; do
+ if test -r "$ac_site_file"; then
+ { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
+echo "$as_me: loading site script $ac_site_file" >&6;}
+ sed 's/^/| /' "$ac_site_file" >&5
+ . "$ac_site_file"
+ fi
+done
+
+if test -r "$cache_file"; then
+ # Some versions of bash will fail to source /dev/null (special
+ # files actually), so we avoid doing that.
+ if test -f "$cache_file"; then
+ { echo "$as_me:$LINENO: loading cache $cache_file" >&5
+echo "$as_me: loading cache $cache_file" >&6;}
+ case $cache_file in
+ [\\/]* | ?:[\\/]* ) . $cache_file;;
+ *) . ./$cache_file;;
+ esac
+ fi
+else
+ { echo "$as_me:$LINENO: creating cache $cache_file" >&5
+echo "$as_me: creating cache $cache_file" >&6;}
+ >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in `(set) 2>&1 |
+ sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
+ eval ac_old_set=\$ac_cv_env_${ac_var}_set
+ eval ac_new_set=\$ac_env_${ac_var}_set
+ eval ac_old_val="\$ac_cv_env_${ac_var}_value"
+ eval ac_new_val="\$ac_env_${ac_var}_value"
+ case $ac_old_set,$ac_new_set in
+ set,)
+ { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,set)
+ { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
+echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,);;
+ *)
+ if test "x$ac_old_val" != "x$ac_new_val"; then
+ { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
+echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+ { echo "$as_me:$LINENO: former value: $ac_old_val" >&5
+echo "$as_me: former value: $ac_old_val" >&2;}
+ { echo "$as_me:$LINENO: current value: $ac_new_val" >&5
+echo "$as_me: current value: $ac_new_val" >&2;}
+ ac_cache_corrupted=:
+ fi;;
+ esac
+ # Pass precious variables to config.status.
+ if test "$ac_new_set" = set; then
+ case $ac_new_val in
+ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
+ ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+ *) ac_arg=$ac_var=$ac_new_val ;;
+ esac
+ case " $ac_configure_args " in
+ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
+ *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+ esac
+ fi
+done
+if $ac_cache_corrupted; then
+ { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
+echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+ { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
+echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+PACKAGENAME=l7vsd
+VERSION=3.0.0-0
+
+am__api_version="1.9"
+ac_aux_dir=
+for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+ if test -f $ac_dir/install-sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f $ac_dir/install.sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ elif test -f $ac_dir/shtool; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/shtool install -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
+echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"
+ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
+
+# Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
+if test -z "$INSTALL"; then
+if test "${ac_cv_path_install+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in
+ ./ | .// | /cC/* | \
+ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
+ /usr/ucb/* ) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+ if test $ac_prog = install &&
+ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ :
+ elif test $ac_prog = install &&
+ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # program-specific install script used by HP pwplus--don't use.
+ :
+ else
+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+ break 3
+ fi
+ fi
+ done
+ done
+ ;;
+esac
+done
+
+
+fi
+ if test "${ac_cv_path_install+set}" = set; then
+ INSTALL=$ac_cv_path_install
+ else
+ # As a last resort, use the slow shell script. We don't cache a
+ # path for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the path is relative.
+ INSTALL=$ac_install_sh
+ fi
+fi
+echo "$as_me:$LINENO: result: $INSTALL" >&5
+echo "${ECHO_T}$INSTALL" >&6
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+echo "$as_me:$LINENO: checking whether build environment is sane" >&5
+echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+ if test "$*" = "X"; then
+ # -L didn't work.
+ set X `ls -t $srcdir/configure conftest.file`
+ fi
+ rm -f conftest.file
+ if test "$*" != "X $srcdir/configure conftest.file" \
+ && test "$*" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken
+alias in your environment" >&5
+echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken
+alias in your environment" >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+
+ test "$2" = conftest.file
+ )
+then
+ # Ok.
+ :
+else
+ { { echo "$as_me:$LINENO: error: newly created file is older than distributed files!
+Check your system clock" >&5
+echo "$as_me: error: newly created file is older than distributed files!
+Check your system clock" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+test "$program_prefix" != NONE &&
+ program_transform_name="s,^,$program_prefix,;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+ program_transform_name="s,\$,$program_suffix,;$program_transform_name"
+# Double any \ or $. echo might interpret backslashes.
+# By default was `s,x,x', remove it if useless.
+cat <<\_ACEOF >conftest.sed
+s/[\\$]/&&/g;s/;s,x,x,$//
+_ACEOF
+program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
+rm conftest.sed
+
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+
+test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+ am_missing_run="$MISSING --run "
+else
+ am_missing_run=
+ { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
+echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+fi
+
+if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
+ # We used to keeping the `.' as first argument, in order to
+ # allow $(mkdir_p) to be used without argument. As in
+ # $(mkdir_p) $(somedir)
+ # where $(somedir) is conditionally defined. However this is wrong
+ # for two reasons:
+ # 1. if the package is installed by a user who cannot write `.'
+ # make install will fail,
+ # 2. the above comment should most certainly read
+ # $(mkdir_p) $(DESTDIR)$(somedir)
+ # so it does not work when $(somedir) is undefined and
+ # $(DESTDIR) is not.
+ # To support the latter case, we have to write
+ # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
+ # so the `.' trick is pointless.
+ mkdir_p='mkdir -p --'
+else
+ # On NextStep and OpenStep, the `mkdir' command does not
+ # recognize any option. It will interpret all options as
+ # directories to create, and then abort because `.' already
+ # exists.
+ for d in ./-p ./--version;
+ do
+ test -d $d && rmdir $d
+ done
+ # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
+ if test -f "$ac_aux_dir/mkinstalldirs"; then
+ mkdir_p='$(mkinstalldirs)'
+ else
+ mkdir_p='$(install_sh) -d'
+ fi
+fi
+
+for ac_prog in gawk mawk nawk awk
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_AWK+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$AWK"; then
+ ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AWK="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+ echo "$as_me:$LINENO: result: $AWK" >&5
+echo "${ECHO_T}$AWK" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$AWK" && break
+done
+
+echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6
+set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'`
+if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.make <<\_ACEOF
+all:
+ @echo 'ac_maketemp="$(MAKE)"'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
+if test -n "$ac_maketemp"; then
+ eval ac_cv_prog_make_${ac_make}_set=yes
+else
+ eval ac_cv_prog_make_${ac_make}_set=no
+fi
+rm -f conftest.make
+fi
+if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+ SET_MAKE=
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+ SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+ am__leading_dot=.
+else
+ am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+
+# test to see if srcdir already configured
+if test "`cd $srcdir && pwd`" != "`pwd`" &&
+ test -f $srcdir/config.status; then
+ { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
+echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+ if (cygpath --version) >/dev/null 2>/dev/null; then
+ CYGPATH_W='cygpath -w'
+ else
+ CYGPATH_W=echo
+ fi
+fi
+
+
+# Define the identity of the package.
+ PACKAGE=$PACKAGENAME
+ VERSION=$VERSION
+
+
+# Some tools Automake needs.
+
+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
+
+
+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
+
+
+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
+
+
+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
+
+
+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+
+install_sh=${install_sh-"$am_aux_dir/install-sh"}
+
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'. However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_STRIP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+ echo "$as_me:$LINENO: result: $STRIP" >&5
+echo "${ECHO_T}$STRIP" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+ ac_ct_STRIP=$STRIP
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_STRIP"; then
+ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_STRIP="strip"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+ test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+ echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+echo "${ECHO_T}$ac_ct_STRIP" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ STRIP=$ac_ct_STRIP
+else
+ STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
+
+# We need awk for the "check" target. The system "awk" is bad on
+# some platforms.
+# Always define AMTAR for backward compatibility.
+
+AMTAR=${AMTAR-"${am_missing_run}tar"}
+
+am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
+
+
+
+
+
+
+ ac_config_headers="$ac_config_headers config.h"
+
+
+# Checks for programs.
+ac_ext=cc
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+ for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CXX+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CXX"; then
+ ac_cv_prog_CXX="$CXX" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+CXX=$ac_cv_prog_CXX
+if test -n "$CXX"; then
+ echo "$as_me:$LINENO: result: $CXX" >&5
+echo "${ECHO_T}$CXX" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$CXX" && break
+ done
+fi
+if test -z "$CXX"; then
+ ac_ct_CXX=$CXX
+ for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_CXX"; then
+ ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CXX="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
+if test -n "$ac_ct_CXX"; then
+ echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5
+echo "${ECHO_T}$ac_ct_CXX" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$ac_ct_CXX" && break
+done
+test -n "$ac_ct_CXX" || ac_ct_CXX="g++"
+
+ CXX=$ac_ct_CXX
+fi
+
+
+# Provide some information about the compiler.
+echo "$as_me:$LINENO:" \
+ "checking for C++ compiler version" >&5
+ac_compiler=`set X $ac_compile; echo $2`
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
+ (eval $ac_compiler --version </dev/null >&5) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
+ (eval $ac_compiler -v </dev/null >&5) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
+ (eval $ac_compiler -V </dev/null >&5) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+echo "$as_me:$LINENO: checking for C++ compiler default output file name" >&5
+echo $ECHO_N "checking for C++ compiler default output file name... $ECHO_C" >&6
+ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
+ (eval $ac_link_default) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ # Find the output, starting from the most likely. This scheme is
+# not robust to junk in `.', hence go to wildcards (a.*) only as a last
+# resort.
+
+# Be careful to initialize this variable, since it used to be cached.
+# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile.
+ac_cv_exeext=
+# b.out is created by i960 compilers.
+for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out
+do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj )
+ ;;
+ conftest.$ac_ext )
+ # This is the source file.
+ ;;
+ [ab].out )
+ # We found the default executable, but exeext='' is most
+ # certainly right.
+ break;;
+ *.* )
+ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ # FIXME: I believe we export ac_cv_exeext for Libtool,
+ # but it would be cool to find out if it's true. Does anybody
+ # maintain Libtool? --akim.
+ export ac_cv_exeext
+ break;;
+ * )
+ break;;
+ esac
+done
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { echo "$as_me:$LINENO: error: C++ compiler cannot create executables
+See \`config.log' for more details." >&5
+echo "$as_me: error: C++ compiler cannot create executables
+See \`config.log' for more details." >&2;}
+ { (exit 77); exit 77; }; }
+fi
+
+ac_exeext=$ac_cv_exeext
+echo "$as_me:$LINENO: result: $ac_file" >&5
+echo "${ECHO_T}$ac_file" >&6
+
+# Check the compiler produces executables we can run. If not, either
+# the compiler is broken, or we cross compile.
+echo "$as_me:$LINENO: checking whether the C++ compiler works" >&5
+echo $ECHO_N "checking whether the C++ compiler works... $ECHO_C" >&6
+# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
+# If not cross compiling, check that we can run a simple program.
+if test "$cross_compiling" != yes; then
+ if { ac_try='./$ac_file'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ cross_compiling=no
+ else
+ if test "$cross_compiling" = maybe; then
+ cross_compiling=yes
+ else
+ { { echo "$as_me:$LINENO: error: cannot run C++ compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot run C++ compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+ fi
+fi
+echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+
+rm -f a.out a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+# Check the compiler produces executables we can run. If not, either
+# the compiler is broken, or we cross compile.
+echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
+echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6
+echo "$as_me:$LINENO: result: $cross_compiling" >&5
+echo "${ECHO_T}$cross_compiling" >&6
+
+echo "$as_me:$LINENO: checking for suffix of executables" >&5
+echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;;
+ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ export ac_cv_exeext
+ break;;
+ * ) break;;
+ esac
+done
+else
+ { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+rm -f conftest$ac_cv_exeext
+echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
+echo "${ECHO_T}$ac_cv_exeext" >&6
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+echo "$as_me:$LINENO: checking for suffix of object files" >&5
+echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6
+if test "${ac_cv_objext+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;;
+ *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+ break;;
+ esac
+done
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute suffix of object files: cannot compile
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
+echo "${ECHO_T}$ac_cv_objext" >&6
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5
+echo $ECHO_N "checking whether we are using the GNU C++ compiler... $ECHO_C" >&6
+if test "${ac_cv_cxx_compiler_gnu+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+#ifndef __GNUC__
+ choke me
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_cxx_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_compiler_gnu=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_compiler_gnu=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5
+echo "${ECHO_T}$ac_cv_cxx_compiler_gnu" >&6
+GXX=`test $ac_compiler_gnu = yes && echo yes`
+ac_test_CXXFLAGS=${CXXFLAGS+set}
+ac_save_CXXFLAGS=$CXXFLAGS
+CXXFLAGS="-g"
+echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5
+echo $ECHO_N "checking whether $CXX accepts -g... $ECHO_C" >&6
+if test "${ac_cv_prog_cxx_g+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_cxx_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_prog_cxx_g=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_prog_cxx_g=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5
+echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6
+if test "$ac_test_CXXFLAGS" = set; then
+ CXXFLAGS=$ac_save_CXXFLAGS
+elif test $ac_cv_prog_cxx_g = yes; then
+ if test "$GXX" = yes; then
+ CXXFLAGS="-g -O2"
+ else
+ CXXFLAGS="-g"
+ fi
+else
+ if test "$GXX" = yes; then
+ CXXFLAGS="-O2"
+ else
+ CXXFLAGS=
+ fi
+fi
+for ac_declaration in \
+ '' \
+ 'extern "C" void std::exit (int) throw (); using std::exit;' \
+ 'extern "C" void std::exit (int); using std::exit;' \
+ 'extern "C" void exit (int) throw ();' \
+ 'extern "C" void exit (int);' \
+ 'void exit (int);'
+do
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_declaration
+#include <stdlib.h>
+int
+main ()
+{
+exit (42);
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_cxx_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ :
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+continue
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_declaration
+int
+main ()
+{
+exit (42);
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_cxx_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+done
+rm -f conftest*
+if test -n "$ac_declaration"; then
+ echo '#ifdef __cplusplus' >>confdefs.h
+ echo $ac_declaration >>confdefs.h
+ echo '#endif' >>confdefs.h
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+DEPDIR="${am__leading_dot}deps"
+
+ ac_config_commands="$ac_config_commands depfiles"
+
+
+am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+ @echo done
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
+echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# We grep out `Entering directory' and `Leaving directory'
+# messages which can occur if `w' ends up in MAKEFLAGS.
+# In particular we don't look at `^make:' because GNU make might
+# be invoked under some other name (usually "gmake"), in which
+# case it prints its new name instead of `make'.
+if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
+ am__include=include
+ am__quote=
+ _am_result=GNU
+fi
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+ echo '.include "confinc"' > confmf
+ if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ fi
+fi
+
+
+echo "$as_me:$LINENO: result: $_am_result" >&5
+echo "${ECHO_T}$_am_result" >&6
+rm -f confinc confmf
+
+# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given.
+if test "${enable_dependency_tracking+set}" = set; then
+ enableval="$enable_dependency_tracking"
+
+fi;
+if test "x$enable_dependency_tracking" != xno; then
+ am_depcomp="$ac_aux_dir/depcomp"
+ AMDEPBACKSLASH='\'
+fi
+
+
+if test "x$enable_dependency_tracking" != xno; then
+ AMDEP_TRUE=
+ AMDEP_FALSE='#'
+else
+ AMDEP_TRUE='#'
+ AMDEP_FALSE=
+fi
+
+
+
+
+depcc="$CXX" am_compiler_list=
+
+echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
+echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6
+if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named `D' -- because `-MD' means `put the output
+ # in D'.
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_CXX_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+ fi
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+ # Solaris 8's {/usr,}/bin/sh.
+ touch sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ case $depmode in
+ nosideeffect)
+ # after this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ none) break ;;
+ esac
+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle `-M -o', and we need to detect this.
+ if depmode=$depmode \
+ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_CXX_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_CXX_dependencies_compiler_type=none
+fi
+
+fi
+echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5
+echo "${ECHO_T}$am_cv_CXX_dependencies_compiler_type" >&6
+CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type
+
+
+
+if
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then
+ am__fastdepCXX_TRUE=
+ am__fastdepCXX_FALSE='#'
+else
+ am__fastdepCXX_TRUE='#'
+ am__fastdepCXX_FALSE=
+fi
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="${ac_tool_prefix}gcc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+ ac_ct_CC=$CC
+ # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CC="gcc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ CC=$ac_ct_CC
+else
+ CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="${ac_tool_prefix}cc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+ ac_ct_CC=$CC
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CC="cc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ CC=$ac_ct_CC
+else
+ CC="$ac_cv_prog_CC"
+fi
+
+fi
+if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+ ac_prog_rejected=yes
+ continue
+ fi
+ ac_cv_prog_CC="cc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+if test $ac_prog_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $ac_cv_prog_CC
+ shift
+ if test $# != 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+ fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in cl
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$CC" && break
+ done
+fi
+if test -z "$CC"; then
+ ac_ct_CC=$CC
+ for ac_prog in cl
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CC="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$ac_ct_CC" && break
+done
+
+ CC=$ac_ct_CC
+fi
+
+fi
+
+
+test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
+See \`config.log' for more details." >&5
+echo "$as_me: error: no acceptable C compiler found in \$PATH
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+
+# Provide some information about the compiler.
+echo "$as_me:$LINENO:" \
+ "checking for C compiler version" >&5
+ac_compiler=`set X $ac_compile; echo $2`
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
+ (eval $ac_compiler --version </dev/null >&5) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
+ (eval $ac_compiler -v </dev/null >&5) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
+ (eval $ac_compiler -V </dev/null >&5) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+
+echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
+echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
+if test "${ac_cv_c_compiler_gnu+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+#ifndef __GNUC__
+ choke me
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_compiler_gnu=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_compiler_gnu=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
+echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
+GCC=`test $ac_compiler_gnu = yes && echo yes`
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+CFLAGS="-g"
+echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
+echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
+if test "${ac_cv_prog_cc_g+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_prog_cc_g=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_prog_cc_g=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
+if test "$ac_test_CFLAGS" = set; then
+ CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+ if test "$GCC" = yes; then
+ CFLAGS="-g -O2"
+ else
+ CFLAGS="-g"
+ fi
+else
+ if test "$GCC" = yes; then
+ CFLAGS="-O2"
+ else
+ CFLAGS=
+ fi
+fi
+echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
+echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
+if test "${ac_cv_prog_cc_stdc+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_cv_prog_cc_stdc=no
+ac_save_CC=$CC
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <stdarg.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+ char **p;
+ int i;
+{
+ return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+ char *s;
+ va_list v;
+ va_start (v,p);
+ s = g (p, va_arg (v,int));
+ va_end (v);
+ return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
+ function prototypes and stuff, but not '\xHH' hex character constants.
+ These don't provoke an error unfortunately, instead are silently treated
+ as 'x'. The following induces an error, until -std1 is added to get
+ proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
+ array size at least. It's necessary to write '\x00'==0 to get something
+ that's true only with -std1. */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
+ ;
+ return 0;
+}
+_ACEOF
+# Don't try gcc -ansi; that turns off useful extensions and
+# breaks some systems' header files.
+# AIX -qlanglvl=ansi
+# Ultrix and OSF/1 -std1
+# HP-UX 10.20 and later -Ae
+# HP-UX older versions -Aa -D_HPUX_SOURCE
+# SVR4 -Xc -D__EXTENSIONS__
+for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+ CC="$ac_save_CC $ac_arg"
+ rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_prog_cc_stdc=$ac_arg
+break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext
+done
+rm -f conftest.$ac_ext conftest.$ac_objext
+CC=$ac_save_CC
+
+fi
+
+case "x$ac_cv_prog_cc_stdc" in
+ x|xno)
+ echo "$as_me:$LINENO: result: none needed" >&5
+echo "${ECHO_T}none needed" >&6 ;;
+ *)
+ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
+ CC="$CC $ac_cv_prog_cc_stdc" ;;
+esac
+
+# Some people use a C++ compiler to compile C. Since we use `exit',
+# in C++ we need to declare it. In case someone uses the same compiler
+# for both compiling C and C++ we need to have the C++ compiler decide
+# the declaration of exit, since it's the most demanding environment.
+cat >conftest.$ac_ext <<_ACEOF
+#ifndef __cplusplus
+ choke me
+#endif
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ for ac_declaration in \
+ '' \
+ 'extern "C" void std::exit (int) throw (); using std::exit;' \
+ 'extern "C" void std::exit (int); using std::exit;' \
+ 'extern "C" void exit (int) throw ();' \
+ 'extern "C" void exit (int);' \
+ 'void exit (int);'
+do
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_declaration
+#include <stdlib.h>
+int
+main ()
+{
+exit (42);
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ :
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+continue
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_declaration
+int
+main ()
+{
+exit (42);
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+done
+rm -f conftest*
+if test -n "$ac_declaration"; then
+ echo '#ifdef __cplusplus' >>confdefs.h
+ echo $ac_declaration >>confdefs.h
+ echo '#endif' >>confdefs.h
+fi
+
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+depcc="$CC" am_compiler_list=
+
+echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
+echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6
+if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named `D' -- because `-MD' means `put the output
+ # in D'.
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_CC_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+ fi
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+ # Solaris 8's {/usr,}/bin/sh.
+ touch sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ case $depmode in
+ nosideeffect)
+ # after this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ none) break ;;
+ esac
+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle `-M -o', and we need to detect this.
+ if depmode=$depmode \
+ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_CC_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_CC_dependencies_compiler_type=none
+fi
+
+fi
+echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
+echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+
+
+if
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+ am__fastdepCC_TRUE=
+ am__fastdepCC_FALSE='#'
+else
+ am__fastdepCC_TRUE='#'
+ am__fastdepCC_FALSE=
+fi
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
+echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
+fi
+if test -z "$CPP"; then
+ if test "${ac_cv_prog_CPP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ # Double quotes because CPP needs to be expanded
+ for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+ do
+ ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ :
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether non-existent headers
+ # can be detected and how.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ # Broken: success on invalid input.
+continue
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then
+ break
+fi
+
+ done
+ ac_cv_prog_CPP=$CPP
+
+fi
+ CPP=$ac_cv_prog_CPP
+else
+ ac_cv_prog_CPP=$CPP
+fi
+echo "$as_me:$LINENO: result: $CPP" >&5
+echo "${ECHO_T}$CPP" >&6
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ :
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether non-existent headers
+ # can be detected and how.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ # Broken: success on invalid input.
+continue
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then
+ :
+else
+ { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details." >&5
+echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+# Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
+if test -z "$INSTALL"; then
+if test "${ac_cv_path_install+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in
+ ./ | .// | /cC/* | \
+ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
+ /usr/ucb/* ) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+ if test $ac_prog = install &&
+ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ :
+ elif test $ac_prog = install &&
+ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # program-specific install script used by HP pwplus--don't use.
+ :
+ else
+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+ break 3
+ fi
+ fi
+ done
+ done
+ ;;
+esac
+done
+
+
+fi
+ if test "${ac_cv_path_install+set}" = set; then
+ INSTALL=$ac_cv_path_install
+ else
+ # As a last resort, use the slow shell script. We don't cache a
+ # path for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the path is relative.
+ INSTALL=$ac_install_sh
+ fi
+fi
+echo "$as_me:$LINENO: result: $INSTALL" >&5
+echo "${ECHO_T}$INSTALL" >&6
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+echo "$as_me:$LINENO: checking whether ln -s works" >&5
+echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6
+LN_S=$as_ln_s
+if test "$LN_S" = "ln -s"; then
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+else
+ echo "$as_me:$LINENO: result: no, using $LN_S" >&5
+echo "${ECHO_T}no, using $LN_S" >&6
+fi
+
+echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6
+set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'`
+if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.make <<\_ACEOF
+all:
+ @echo 'ac_maketemp="$(MAKE)"'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
+if test -n "$ac_maketemp"; then
+ eval ac_cv_prog_make_${ac_make}_set=yes
+else
+ eval ac_cv_prog_make_${ac_make}_set=no
+fi
+rm -f conftest.make
+fi
+if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+ SET_MAKE=
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+ SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_RANLIB+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+ echo "$as_me:$LINENO: result: $RANLIB" >&5
+echo "${ECHO_T}$RANLIB" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+ ac_ct_RANLIB=$RANLIB
+ # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_RANLIB"; then
+ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_RANLIB="ranlib"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+ test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":"
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+ echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
+echo "${ECHO_T}$ac_ct_RANLIB" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ RANLIB=$ac_ct_RANLIB
+else
+ RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+
+# Checks for libraries.
+
+echo "$as_me:$LINENO: checking for main in -llog4cxx" >&5
+echo $ECHO_N "checking for main in -llog4cxx... $ECHO_C" >&6
+if test "${ac_cv_lib_log4cxx_main+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-llog4cxx $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+
+int
+main ()
+{
+main ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_lib_log4cxx_main=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_log4cxx_main=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_log4cxx_main" >&5
+echo "${ECHO_T}$ac_cv_lib_log4cxx_main" >&6
+if test $ac_cv_lib_log4cxx_main = yes; then
+ :
+else
+ { { echo "$as_me:$LINENO: error: l7vsd require log4cxx library. " >&5
+echo "$as_me: error: l7vsd require log4cxx library. " >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+echo "$as_me:$LINENO: checking for main in -lrt" >&5
+echo $ECHO_N "checking for main in -lrt... $ECHO_C" >&6
+if test "${ac_cv_lib_rt_main+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lrt $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+
+int
+main ()
+{
+main ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_lib_rt_main=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_rt_main=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_rt_main" >&5
+echo "${ECHO_T}$ac_cv_lib_rt_main" >&6
+if test $ac_cv_lib_rt_main = yes; then
+ :
+else
+ { { echo "$as_me:$LINENO: error: l7vsd require rt library. " >&5
+echo "$as_me: error: l7vsd require rt library. " >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+
+# Checks for header files.
+
+echo "$as_me:$LINENO: checking for egrep" >&5
+echo $ECHO_N "checking for egrep... $ECHO_C" >&6
+if test "${ac_cv_prog_egrep+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if echo a | (grep -E '(a|b)') >/dev/null 2>&1
+ then ac_cv_prog_egrep='grep -E'
+ else ac_cv_prog_egrep='egrep'
+ fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5
+echo "${ECHO_T}$ac_cv_prog_egrep" >&6
+ EGREP=$ac_cv_prog_egrep
+
+
+echo "$as_me:$LINENO: checking for ANSI C header files" >&5
+echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
+if test "${ac_cv_header_stdc+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_header_stdc=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_header_stdc=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "memchr" >/dev/null 2>&1; then
+ :
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "free" >/dev/null 2>&1; then
+ :
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+ if test "$cross_compiling" = yes; then
+ :
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <ctype.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+ (('a' <= (c) && (c) <= 'i') \
+ || ('j' <= (c) && (c) <= 'r') \
+ || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+ int i;
+ for (i = 0; i < 256; i++)
+ if (XOR (islower (i), ISLOWER (i))
+ || toupper (i) != TOUPPER (i))
+ exit(2);
+ exit (0);
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ :
+else
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+ac_cv_header_stdc=no
+fi
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
+echo "${ECHO_T}$ac_cv_header_stdc" >&6
+if test $ac_cv_header_stdc = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define STDC_HEADERS 1
+_ACEOF
+
+fi
+
+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+
+
+
+
+
+
+
+
+
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+ inttypes.h stdint.h unistd.h
+do
+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+
+#include <$ac_header>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ eval "$as_ac_Header=yes"
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+eval "$as_ac_Header=no"
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+
+
+for ac_header in limits.h unistd.h
+do
+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+else
+ # Is the header compilable?
+echo "$as_me:$LINENO: checking $ac_header usability" >&5
+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+#include <$ac_header>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_header_compiler=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_header_compiler=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6
+
+# Is the header present?
+echo "$as_me:$LINENO: checking $ac_header presence" >&5
+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <$ac_header>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ ac_header_preproc=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_header_preproc=no
+fi
+rm -f conftest.err conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6
+
+# So? What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
+ yes:no: )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
+ ac_header_preproc=yes
+ ;;
+ no:yes:* )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
+echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
+echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
+echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
+ (
+ cat <<\_ASBOX
+## ------------------------------------------ ##
+## Report this to the AC_PACKAGE_NAME lists. ##
+## ------------------------------------------ ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
+esac
+echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ eval "$as_ac_Header=\$ac_header_preproc"
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+
+fi
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+# Checks for typedefs, structures, and compiler characteristics.
+echo "$as_me:$LINENO: checking for stdbool.h that conforms to C99" >&5
+echo $ECHO_N "checking for stdbool.h that conforms to C99... $ECHO_C" >&6
+if test "${ac_cv_header_stdbool_h+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+#include <stdbool.h>
+#ifndef bool
+# error bool is not defined
+#endif
+#ifndef false
+# error false is not defined
+#endif
+#if false
+# error false is not 0
+#endif
+#ifndef true
+# error true is not defined
+#endif
+#if true != 1
+# error true is not 1
+#endif
+#ifndef __bool_true_false_are_defined
+# error __bool_true_false_are_defined is not defined
+#endif
+
+ struct s { _Bool s: 1; _Bool t; } s;
+
+ char a[true == 1 ? 1 : -1];
+ char b[false == 0 ? 1 : -1];
+ char c[__bool_true_false_are_defined == 1 ? 1 : -1];
+ char d[(bool) -0.5 == true ? 1 : -1];
+ bool e = &s;
+ char f[(_Bool) -0.0 == false ? 1 : -1];
+ char g[true];
+ char h[sizeof (_Bool)];
+ char i[sizeof s.t];
+
+int
+main ()
+{
+ return !a + !b + !c + !d + !e + !f + !g + !h + !i;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_header_stdbool_h=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_header_stdbool_h=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_header_stdbool_h" >&5
+echo "${ECHO_T}$ac_cv_header_stdbool_h" >&6
+echo "$as_me:$LINENO: checking for _Bool" >&5
+echo $ECHO_N "checking for _Bool... $ECHO_C" >&6
+if test "${ac_cv_type__Bool+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+if ((_Bool *) 0)
+ return 0;
+if (sizeof (_Bool))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_type__Bool=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_type__Bool=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_type__Bool" >&5
+echo "${ECHO_T}$ac_cv_type__Bool" >&6
+if test $ac_cv_type__Bool = yes; then
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE__BOOL 1
+_ACEOF
+
+
+fi
+
+if test $ac_cv_header_stdbool_h = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_STDBOOL_H 1
+_ACEOF
+
+fi
+
+echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5
+echo $ECHO_N "checking for an ANSI C-conforming const... $ECHO_C" >&6
+if test "${ac_cv_c_const+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+/* FIXME: Include the comments suggested by Paul. */
+#ifndef __cplusplus
+ /* Ultrix mips cc rejects this. */
+ typedef int charset[2];
+ const charset x;
+ /* SunOS 4.1.1 cc rejects this. */
+ char const *const *ccp;
+ char **p;
+ /* NEC SVR4.0.2 mips cc rejects this. */
+ struct point {int x, y;};
+ static struct point const zero = {0,0};
+ /* AIX XL C 1.02.0.0 rejects this.
+ It does not let you subtract one const X* pointer from another in
+ an arm of an if-expression whose if-part is not a constant
+ expression */
+ const char *g = "string";
+ ccp = &g + (g ? g-g : 0);
+ /* HPUX 7.0 cc rejects these. */
+ ++ccp;
+ p = (char**) ccp;
+ ccp = (char const *const *) p;
+ { /* SCO 3.2v4 cc rejects this. */
+ char *t;
+ char const *s = 0 ? (char *) 0 : (char const *) 0;
+
+ *t++ = 0;
+ }
+ { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */
+ int x[] = {25, 17};
+ const int *foo = &x[0];
+ ++foo;
+ }
+ { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
+ typedef const int *iptr;
+ iptr p = 0;
+ ++p;
+ }
+ { /* AIX XL C 1.02.0.0 rejects this saying
+ "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
+ struct s { int j; const int *ap[3]; };
+ struct s *b; b->j = 5;
+ }
+ { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
+ const int foo = 10;
+ }
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_c_const=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_c_const=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5
+echo "${ECHO_T}$ac_cv_c_const" >&6
+if test $ac_cv_c_const = no; then
+
+cat >>confdefs.h <<\_ACEOF
+#define const
+_ACEOF
+
+fi
+
+echo "$as_me:$LINENO: checking for inline" >&5
+echo $ECHO_N "checking for inline... $ECHO_C" >&6
+if test "${ac_cv_c_inline+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_cv_c_inline=no
+for ac_kw in inline __inline__ __inline; do
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#ifndef __cplusplus
+typedef int foo_t;
+static $ac_kw foo_t static_foo () {return 0; }
+$ac_kw foo_t foo () {return 0; }
+#endif
+
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_c_inline=$ac_kw; break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+done
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_c_inline" >&5
+echo "${ECHO_T}$ac_cv_c_inline" >&6
+
+
+case $ac_cv_c_inline in
+ inline | yes) ;;
+ *)
+ case $ac_cv_c_inline in
+ no) ac_val=;;
+ *) ac_val=$ac_cv_c_inline;;
+ esac
+ cat >>confdefs.h <<_ACEOF
+#ifndef __cplusplus
+#define inline $ac_val
+#endif
+_ACEOF
+ ;;
+esac
+
+echo "$as_me:$LINENO: checking for size_t" >&5
+echo $ECHO_N "checking for size_t... $ECHO_C" >&6
+if test "${ac_cv_type_size_t+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+if ((size_t *) 0)
+ return 0;
+if (sizeof (size_t))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_type_size_t=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_type_size_t=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_type_size_t" >&5
+echo "${ECHO_T}$ac_cv_type_size_t" >&6
+if test $ac_cv_type_size_t = yes; then
+ :
+else
+
+cat >>confdefs.h <<_ACEOF
+#define size_t unsigned
+_ACEOF
+
+fi
+
+echo "$as_me:$LINENO: checking whether struct tm is in sys/time.h or time.h" >&5
+echo $ECHO_N "checking whether struct tm is in sys/time.h or time.h... $ECHO_C" >&6
+if test "${ac_cv_struct_tm+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sys/types.h>
+#include <time.h>
+
+int
+main ()
+{
+struct tm *tp; tp->tm_sec;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_struct_tm=time.h
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_struct_tm=sys/time.h
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_struct_tm" >&5
+echo "${ECHO_T}$ac_cv_struct_tm" >&6
+if test $ac_cv_struct_tm = sys/time.h; then
+
+cat >>confdefs.h <<\_ACEOF
+#define TM_IN_SYS_TIME 1
+_ACEOF
+
+fi
+
+
+# Checks for library functions.
+echo "$as_me:$LINENO: checking for ANSI C header files" >&5
+echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
+if test "${ac_cv_header_stdc+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_header_stdc=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_header_stdc=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "memchr" >/dev/null 2>&1; then
+ :
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "free" >/dev/null 2>&1; then
+ :
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+ if test "$cross_compiling" = yes; then
+ :
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <ctype.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+ (('a' <= (c) && (c) <= 'i') \
+ || ('j' <= (c) && (c) <= 'r') \
+ || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+ int i;
+ for (i = 0; i < 256; i++)
+ if (XOR (islower (i), ISLOWER (i))
+ || toupper (i) != TOUPPER (i))
+ exit(2);
+ exit (0);
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ :
+else
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+ac_cv_header_stdc=no
+fi
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
+echo "${ECHO_T}$ac_cv_header_stdc" >&6
+if test $ac_cv_header_stdc = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define STDC_HEADERS 1
+_ACEOF
+
+fi
+
+echo "$as_me:$LINENO: checking whether time.h and sys/time.h may both be included" >&5
+echo $ECHO_N "checking whether time.h and sys/time.h may both be included... $ECHO_C" >&6
+if test "${ac_cv_header_time+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sys/types.h>
+#include <sys/time.h>
+#include <time.h>
+
+int
+main ()
+{
+if ((struct tm *) 0)
+return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_header_time=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_header_time=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_header_time" >&5
+echo "${ECHO_T}$ac_cv_header_time" >&6
+if test $ac_cv_header_time = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define TIME_WITH_SYS_TIME 1
+_ACEOF
+
+fi
+
+
+
+
+for ac_header in stdlib.h sys/time.h unistd.h
+do
+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+else
+ # Is the header compilable?
+echo "$as_me:$LINENO: checking $ac_header usability" >&5
+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+#include <$ac_header>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_header_compiler=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_header_compiler=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6
+
+# Is the header present?
+echo "$as_me:$LINENO: checking $ac_header presence" >&5
+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <$ac_header>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ ac_header_preproc=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_header_preproc=no
+fi
+rm -f conftest.err conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6
+
+# So? What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
+ yes:no: )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
+ ac_header_preproc=yes
+ ;;
+ no:yes:* )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
+echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
+echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
+echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
+ (
+ cat <<\_ASBOX
+## ------------------------------------------ ##
+## Report this to the AC_PACKAGE_NAME lists. ##
+## ------------------------------------------ ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
+esac
+echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ eval "$as_ac_Header=\$ac_header_preproc"
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+
+fi
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+for ac_func in alarm
+do
+as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
+echo "$as_me:$LINENO: checking for $ac_func" >&5
+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
+if eval "test \"\${$as_ac_var+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define $ac_func innocuous_$ac_func
+
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $ac_func
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func ();
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+char (*f) () = $ac_func;
+#endif
+#ifdef __cplusplus
+}
+#endif
+
+int
+main ()
+{
+return f != $ac_func;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ eval "$as_ac_var=yes"
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+eval "$as_ac_var=no"
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
+if test `eval echo '${'$as_ac_var'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+done
+
+echo "$as_me:$LINENO: checking for working mktime" >&5
+echo $ECHO_N "checking for working mktime... $ECHO_C" >&6
+if test "${ac_cv_func_working_mktime+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test "$cross_compiling" = yes; then
+ ac_cv_func_working_mktime=no
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+/* Test program from Paul Eggert and Tony Leneis. */
+#if TIME_WITH_SYS_TIME
+# include <sys/time.h>
+# include <time.h>
+#else
+# if HAVE_SYS_TIME_H
+# include <sys/time.h>
+# else
+# include <time.h>
+# endif
+#endif
+
+#if HAVE_STDLIB_H
+# include <stdlib.h>
+#endif
+
+#if HAVE_UNISTD_H
+# include <unistd.h>
+#endif
+
+#if !HAVE_ALARM
+# define alarm(X) /* empty */
+#endif
+
+/* Work around redefinition to rpl_putenv by other config tests. */
+#undef putenv
+
+static time_t time_t_max;
+static time_t time_t_min;
+
+/* Values we'll use to set the TZ environment variable. */
+static char *tz_strings[] = {
+ (char *) 0, "TZ=GMT0", "TZ=JST-9",
+ "TZ=EST+3EDT+2,M10.1.0/00:00:00,M2.3.0/00:00:00"
+};
+#define N_STRINGS (sizeof (tz_strings) / sizeof (tz_strings[0]))
+
+/* Fail if mktime fails to convert a date in the spring-forward gap.
+ Based on a problem report from Andreas Jaeger. */
+static void
+spring_forward_gap ()
+{
+ /* glibc (up to about 1998-10-07) failed this test. */
+ struct tm tm;
+
+ /* Use the portable POSIX.1 specification "TZ=PST8PDT,M4.1.0,M10.5.0"
+ instead of "TZ=America/Vancouver" in order to detect the bug even
+ on systems that don't support the Olson extension, or don't have the
+ full zoneinfo tables installed. */
+ putenv ("TZ=PST8PDT,M4.1.0,M10.5.0");
+
+ tm.tm_year = 98;
+ tm.tm_mon = 3;
+ tm.tm_mday = 5;
+ tm.tm_hour = 2;
+ tm.tm_min = 0;
+ tm.tm_sec = 0;
+ tm.tm_isdst = -1;
+ if (mktime (&tm) == (time_t)-1)
+ exit (1);
+}
+
+static void
+mktime_test1 (now)
+ time_t now;
+{
+ struct tm *lt;
+ if ((lt = localtime (&now)) && mktime (lt) != now)
+ exit (1);
+}
+
+static void
+mktime_test (now)
+ time_t now;
+{
+ mktime_test1 (now);
+ mktime_test1 ((time_t) (time_t_max - now));
+ mktime_test1 ((time_t) (time_t_min + now));
+}
+
+static void
+irix_6_4_bug ()
+{
+ /* Based on code from Ariel Faigon. */
+ struct tm tm;
+ tm.tm_year = 96;
+ tm.tm_mon = 3;
+ tm.tm_mday = 0;
+ tm.tm_hour = 0;
+ tm.tm_min = 0;
+ tm.tm_sec = 0;
+ tm.tm_isdst = -1;
+ mktime (&tm);
+ if (tm.tm_mon != 2 || tm.tm_mday != 31)
+ exit (1);
+}
+
+static void
+bigtime_test (j)
+ int j;
+{
+ struct tm tm;
+ time_t now;
+ tm.tm_year = tm.tm_mon = tm.tm_mday = tm.tm_hour = tm.tm_min = tm.tm_sec = j;
+ now = mktime (&tm);
+ if (now != (time_t) -1)
+ {
+ struct tm *lt = localtime (&now);
+ if (! (lt
+ && lt->tm_year == tm.tm_year
+ && lt->tm_mon == tm.tm_mon
+ && lt->tm_mday == tm.tm_mday
+ && lt->tm_hour == tm.tm_hour
+ && lt->tm_min == tm.tm_min
+ && lt->tm_sec == tm.tm_sec
+ && lt->tm_yday == tm.tm_yday
+ && lt->tm_wday == tm.tm_wday
+ && ((lt->tm_isdst < 0 ? -1 : 0 < lt->tm_isdst)
+ == (tm.tm_isdst < 0 ? -1 : 0 < tm.tm_isdst))))
+ exit (1);
+ }
+}
+
+int
+main ()
+{
+ time_t t, delta;
+ int i, j;
+
+ /* This test makes some buggy mktime implementations loop.
+ Give up after 60 seconds; a mktime slower than that
+ isn't worth using anyway. */
+ alarm (60);
+
+ for (time_t_max = 1; 0 < time_t_max; time_t_max *= 2)
+ continue;
+ time_t_max--;
+ if ((time_t) -1 < 0)
+ for (time_t_min = -1; (time_t) (time_t_min * 2) < 0; time_t_min *= 2)
+ continue;
+ delta = time_t_max / 997; /* a suitable prime number */
+ for (i = 0; i < N_STRINGS; i++)
+ {
+ if (tz_strings[i])
+ putenv (tz_strings[i]);
+
+ for (t = 0; t <= time_t_max - delta; t += delta)
+ mktime_test (t);
+ mktime_test ((time_t) 1);
+ mktime_test ((time_t) (60 * 60));
+ mktime_test ((time_t) (60 * 60 * 24));
+
+ for (j = 1; 0 < j; j *= 2)
+ bigtime_test (j);
+ bigtime_test (j - 1);
+ }
+ irix_6_4_bug ();
+ spring_forward_gap ();
+ exit (0);
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_func_working_mktime=yes
+else
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+ac_cv_func_working_mktime=no
+fi
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_func_working_mktime" >&5
+echo "${ECHO_T}$ac_cv_func_working_mktime" >&6
+if test $ac_cv_func_working_mktime = no; then
+ case $LIBOBJS in
+ "mktime.$ac_objext" | \
+ *" mktime.$ac_objext" | \
+ "mktime.$ac_objext "* | \
+ *" mktime.$ac_objext "* ) ;;
+ *) LIBOBJS="$LIBOBJS mktime.$ac_objext" ;;
+esac
+
+fi
+
+
+for ac_func in strftime
+do
+as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
+echo "$as_me:$LINENO: checking for $ac_func" >&5
+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
+if eval "test \"\${$as_ac_var+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define $ac_func innocuous_$ac_func
+
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $ac_func
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func ();
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+char (*f) () = $ac_func;
+#endif
+#ifdef __cplusplus
+}
+#endif
+
+int
+main ()
+{
+return f != $ac_func;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ eval "$as_ac_var=yes"
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+eval "$as_ac_var=no"
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
+if test `eval echo '${'$as_ac_var'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+else
+ # strftime is in -lintl on SCO UNIX.
+echo "$as_me:$LINENO: checking for strftime in -lintl" >&5
+echo $ECHO_N "checking for strftime in -lintl... $ECHO_C" >&6
+if test "${ac_cv_lib_intl_strftime+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lintl $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char strftime ();
+int
+main ()
+{
+strftime ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_lib_intl_strftime=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_intl_strftime=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_intl_strftime" >&5
+echo "${ECHO_T}$ac_cv_lib_intl_strftime" >&6
+if test $ac_cv_lib_intl_strftime = yes; then
+ cat >>confdefs.h <<\_ACEOF
+#define HAVE_STRFTIME 1
+_ACEOF
+
+LIBS="-lintl $LIBS"
+fi
+
+fi
+done
+
+
+
+
+for ac_func in gethostname localtime_r memset
+do
+as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
+echo "$as_me:$LINENO: checking for $ac_func" >&5
+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
+if eval "test \"\${$as_ac_var+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define $ac_func innocuous_$ac_func
+
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $ac_func
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func ();
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+char (*f) () = $ac_func;
+#endif
+#ifdef __cplusplus
+}
+#endif
+
+int
+main ()
+{
+return f != $ac_func;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ eval "$as_ac_var=yes"
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+eval "$as_ac_var=no"
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
+if test `eval echo '${'$as_ac_var'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+done
+
+
+# application-specific option
+if test `uname -m` == "x86_64"; then
+ libdir=/usr/lib64
+
+else
+ libdir=/usr/lib
+
+fi
+
+CC=g++
+
+exec_prefix=/usr
+
+#AC_CONFIG_FILES([parameter/Makefile]
+# [logger/Makefile]
+# [module/schedule/Makefile]
+# [module/protocol/Makefile]
+# [Makefile]
+# [src/Makefile])
+ ac_config_files="$ac_config_files parameter/Makefile logger/Makefile Makefile"
+
+ ac_config_files="$ac_config_files l7vsd.spec"
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems. If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+{
+ (set) 2>&1 |
+ case `(ac_space=' '; set | grep ac_space) 2>&1` in
+ *ac_space=\ *)
+ # `set' does not quote correctly, so add quotes (double-quote
+ # substitution turns \\\\ into \\, and sed turns \\ into \).
+ sed -n \
+ "s/'/'\\\\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+ ;;
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n \
+ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+ ;;
+ esac;
+} |
+ sed '
+ t clear
+ : clear
+ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+ t end
+ /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+ : end' >>confcache
+if diff $cache_file confcache >/dev/null 2>&1; then :; else
+ if test -w $cache_file; then
+ test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
+ cat confcache >$cache_file
+ else
+ echo "not updating unwritable cache $cache_file"
+ fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# VPATH may cause trouble with some makes, so we remove $(srcdir),
+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+ ac_vpsub='/^[ ]*VPATH[ ]*=/{
+s/:*\$(srcdir):*/:/;
+s/:*\${srcdir}:*/:/;
+s/:*@srcdir@:*/:/;
+s/^\([^=]*=[ ]*\):*/\1/;
+s/:*$//;
+s/^[^=]*=[ ]*$//;
+}'
+fi
+
+DEFS=-DHAVE_CONFIG_H
+
+ac_libobjs=
+ac_ltlibobjs=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+ # 1. Remove the extension, and $U if already installed.
+ ac_i=`echo "$ac_i" |
+ sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
+ # 2. Add them.
+ ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
+ ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCXX\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"am__fastdepCXX\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+: ${CONFIG_STATUS=./config.status}
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
+echo "$as_me: creating $CONFIG_STATUS" >&6;}
+cat >$CONFIG_STATUS <<_ACEOF
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+SHELL=\${CONFIG_SHELL-$SHELL}
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+## --------------------- ##
+## M4sh Initialization. ##
+## --------------------- ##
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
+ set -o posix
+fi
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# Support unset when possible.
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ as_unset=unset
+else
+ as_unset=false
+fi
+
+
+# Work around bugs in pre-3.0 UWIN ksh.
+$as_unset ENV MAIL MAILPATH
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+for as_var in \
+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+ LC_TELEPHONE LC_TIME
+do
+ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
+ eval $as_var=C; export $as_var
+ else
+ $as_unset $as_var
+ fi
+done
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+
+# Name of the executable.
+as_me=`$as_basename "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)$' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
+ /^X\/\(\/\/\)$/{ s//\1/; q; }
+ /^X\/\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+
+
+# PATH needs CR, and LINENO needs CR and PATH.
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+
+
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x$as_lineno_3" = "x$as_lineno_2" || {
+ # Find who we are. Look in the path if we contain no path at all
+ # relative or not.
+ case $0 in
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+
+ ;;
+ esac
+ # We did not find ourselves, most probably we were run as `sh COMMAND'
+ # in which case we are not to be found in the path.
+ if test "x$as_myself" = x; then
+ as_myself=$0
+ fi
+ if test ! -f "$as_myself"; then
+ { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
+echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+ case $CONFIG_SHELL in
+ '')
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for as_base in sh bash ksh sh5; do
+ case $as_dir in
+ /*)
+ if ("$as_dir/$as_base" -c '
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
+ $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
+ $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
+ CONFIG_SHELL=$as_dir/$as_base
+ export CONFIG_SHELL
+ exec "$CONFIG_SHELL" "$0" ${1+"$@"}
+ fi;;
+ esac
+ done
+done
+;;
+ esac
+
+ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
+ # uniformly replaced by the line number. The first 'sed' inserts a
+ # line-number line before each line; the second 'sed' does the real
+ # work. The second script uses 'N' to pair each line-number line
+ # with the numbered line, and appends trailing '-' during
+ # substitution so that $LINENO is not a special case at line end.
+ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
+ # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
+ sed '=' <$as_myself |
+ sed '
+ N
+ s,$,-,
+ : loop
+ s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+ t loop
+ s,-$,,
+ s,^['$as_cr_digits']*\n,,
+ ' >$as_me.lineno &&
+ chmod +x $as_me.lineno ||
+ { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
+echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
+ { (exit 1); exit 1; }; }
+
+ # Don't try to exec as it changes $[0], causing all sort of problems
+ # (the dirname of $[0] is not the place where we might find the
+ # original and so on. Autoconf is especially sensible to this).
+ . ./$as_me.lineno
+ # Exit status is that of the last command.
+ exit
+}
+
+
+case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
+ *c*,-n*) ECHO_N= ECHO_C='
+' ECHO_T=' ' ;;
+ *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
+ *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
+esac
+
+if expr a : '\(a\)' >/dev/null 2>&1; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+rm -f conf$$ conf$$.exe conf$$.file
+echo >conf$$.file
+if ln -s conf$$.file conf$$ 2>/dev/null; then
+ # We could just check for DJGPP; but this test a) works b) is more generic
+ # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
+ if test -f conf$$.exe; then
+ # Don't use ln at all; we don't have any links
+ as_ln_s='cp -p'
+ else
+ as_ln_s='ln -s'
+ fi
+elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+else
+ as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.file
+
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p=:
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+as_executable_p="test -f"
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.
+as_nl='
+'
+IFS=" $as_nl"
+
+# CDPATH.
+$as_unset CDPATH
+
+exec 6>&1
+
+# Open the log real soon, to keep \$[0] and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling. Logging --version etc. is OK.
+exec 5>>config.log
+{
+ echo
+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+} >&5
+cat >&5 <<_CSEOF
+
+This file was extended by $as_me, which was
+generated by GNU Autoconf 2.59. Invocation command line was
+
+ CONFIG_FILES = $CONFIG_FILES
+ CONFIG_HEADERS = $CONFIG_HEADERS
+ CONFIG_LINKS = $CONFIG_LINKS
+ CONFIG_COMMANDS = $CONFIG_COMMANDS
+ $ $0 $@
+
+_CSEOF
+echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
+echo >&5
+_ACEOF
+
+# Files that config.status was made for.
+if test -n "$ac_config_files"; then
+ echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
+fi
+
+if test -n "$ac_config_headers"; then
+ echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
+fi
+
+if test -n "$ac_config_links"; then
+ echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
+fi
+
+if test -n "$ac_config_commands"; then
+ echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+
+ac_cs_usage="\
+\`$as_me' instantiates files from templates according to the
+current configuration.
+
+Usage: $0 [OPTIONS] [FILE]...
+
+ -h, --help print this help, then exit
+ -V, --version print version number, then exit
+ -q, --quiet do not print progress messages
+ -d, --debug don't remove temporary files
+ --recheck update $as_me by reconfiguring in the same conditions
+ --file=FILE[:TEMPLATE]
+ instantiate the configuration file FILE
+ --header=FILE[:TEMPLATE]
+ instantiate the configuration header FILE
+
+Configuration files:
+$config_files
+
+Configuration headers:
+$config_headers
+
+Configuration commands:
+$config_commands
+
+Report bugs to <bug-autoconf@gnu.org>."
+_ACEOF
+
+cat >>$CONFIG_STATUS <<_ACEOF
+ac_cs_version="\\
+config.status
+configured by $0, generated by GNU Autoconf 2.59,
+ with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
+
+Copyright (C) 2003 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+srcdir=$srcdir
+INSTALL="$INSTALL"
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+# If no file are specified by the user, then we need to provide default
+# value. By we need to know if files were specified by the user.
+ac_need_defaults=:
+while test $# != 0
+do
+ case $1 in
+ --*=*)
+ ac_option=`expr "x$1" : 'x\([^=]*\)='`
+ ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
+ ac_shift=:
+ ;;
+ -*)
+ ac_option=$1
+ ac_optarg=$2
+ ac_shift=shift
+ ;;
+ *) # This is not an option, so the user has probably given explicit
+ # arguments.
+ ac_option=$1
+ ac_need_defaults=false;;
+ esac
+
+ case $ac_option in
+ # Handling of the options.
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+ ac_cs_recheck=: ;;
+ --version | --vers* | -V )
+ echo "$ac_cs_version"; exit 0 ;;
+ --he | --h)
+ # Conflict between --help and --header
+ { { echo "$as_me:$LINENO: error: ambiguous option: $1
+Try \`$0 --help' for more information." >&5
+echo "$as_me: error: ambiguous option: $1
+Try \`$0 --help' for more information." >&2;}
+ { (exit 1); exit 1; }; };;
+ --help | --hel | -h )
+ echo "$ac_cs_usage"; exit 0 ;;
+ --debug | --d* | -d )
+ debug=: ;;
+ --file | --fil | --fi | --f )
+ $ac_shift
+ CONFIG_FILES="$CONFIG_FILES $ac_optarg"
+ ac_need_defaults=false;;
+ --header | --heade | --head | --hea )
+ $ac_shift
+ CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
+ ac_need_defaults=false;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil | --si | --s)
+ ac_cs_silent=: ;;
+
+ # This is an error.
+ -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&5
+echo "$as_me: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&2;}
+ { (exit 1); exit 1; }; } ;;
+
+ *) ac_config_targets="$ac_config_targets $1" ;;
+
+ esac
+ shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+ exec 6>/dev/null
+ ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+if \$ac_cs_recheck; then
+ echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
+ exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+fi
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<_ACEOF
+#
+# INIT-COMMANDS section.
+#
+
+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+
+_ACEOF
+
+
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+for ac_config_target in $ac_config_targets
+do
+ case "$ac_config_target" in
+ # Handling of arguments.
+ "parameter/Makefile" ) CONFIG_FILES="$CONFIG_FILES parameter/Makefile" ;;
+ "logger/Makefile" ) CONFIG_FILES="$CONFIG_FILES logger/Makefile" ;;
+ "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+ "l7vsd.spec" ) CONFIG_FILES="$CONFIG_FILES l7vsd.spec" ;;
+ "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+ "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
+ *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
+echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
+ { (exit 1); exit 1; }; };;
+ esac
+done
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used. Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+ test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
+ test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+fi
+
+# Have a temporary directory for convenience. Make it in the build tree
+# simply because there is no reason to put it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Create a temporary directory, and hook for its removal unless debugging.
+$debug ||
+{
+ trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
+ trap '{ (exit 1); exit 1; }' 1 2 13 15
+}
+
+# Create a (secure) tmp directory for tmp files.
+
+{
+ tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
+ test -n "$tmp" && test -d "$tmp"
+} ||
+{
+ tmp=./confstat$$-$RANDOM
+ (umask 077 && mkdir $tmp)
+} ||
+{
+ echo "$me: cannot create a temporary directory in ." >&2
+ { (exit 1); exit 1; }
+}
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<_ACEOF
+
+#
+# CONFIG_FILES section.
+#
+
+# No need to generate the scripts if there are no CONFIG_FILES.
+# This happens for instance when ./config.status config.h
+if test -n "\$CONFIG_FILES"; then
+ # Protect against being on the right side of a sed subst in config.status.
+ sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
+ s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
+s,@SHELL@,$SHELL,;t t
+s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
+s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
+s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
+s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
+s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
+s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
+s,@exec_prefix@,$exec_prefix,;t t
+s,@prefix@,$prefix,;t t
+s,@program_transform_name@,$program_transform_name,;t t
+s,@bindir@,$bindir,;t t
+s,@sbindir@,$sbindir,;t t
+s,@libexecdir@,$libexecdir,;t t
+s,@datadir@,$datadir,;t t
+s,@sysconfdir@,$sysconfdir,;t t
+s,@sharedstatedir@,$sharedstatedir,;t t
+s,@localstatedir@,$localstatedir,;t t
+s,@libdir@,$libdir,;t t
+s,@includedir@,$includedir,;t t
+s,@oldincludedir@,$oldincludedir,;t t
+s,@infodir@,$infodir,;t t
+s,@mandir@,$mandir,;t t
+s,@build_alias@,$build_alias,;t t
+s,@host_alias@,$host_alias,;t t
+s,@target_alias@,$target_alias,;t t
+s,@DEFS@,$DEFS,;t t
+s,@ECHO_C@,$ECHO_C,;t t
+s,@ECHO_N@,$ECHO_N,;t t
+s,@ECHO_T@,$ECHO_T,;t t
+s,@LIBS@,$LIBS,;t t
+s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
+s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
+s,@INSTALL_DATA@,$INSTALL_DATA,;t t
+s,@CYGPATH_W@,$CYGPATH_W,;t t
+s,@PACKAGE@,$PACKAGE,;t t
+s,@VERSION@,$VERSION,;t t
+s,@ACLOCAL@,$ACLOCAL,;t t
+s,@AUTOCONF@,$AUTOCONF,;t t
+s,@AUTOMAKE@,$AUTOMAKE,;t t
+s,@AUTOHEADER@,$AUTOHEADER,;t t
+s,@MAKEINFO@,$MAKEINFO,;t t
+s,@install_sh@,$install_sh,;t t
+s,@STRIP@,$STRIP,;t t
+s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t
+s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t
+s,@mkdir_p@,$mkdir_p,;t t
+s,@AWK@,$AWK,;t t
+s,@SET_MAKE@,$SET_MAKE,;t t
+s,@am__leading_dot@,$am__leading_dot,;t t
+s,@AMTAR@,$AMTAR,;t t
+s,@am__tar@,$am__tar,;t t
+s,@am__untar@,$am__untar,;t t
+s,@CXX@,$CXX,;t t
+s,@CXXFLAGS@,$CXXFLAGS,;t t
+s,@LDFLAGS@,$LDFLAGS,;t t
+s,@CPPFLAGS@,$CPPFLAGS,;t t
+s,@ac_ct_CXX@,$ac_ct_CXX,;t t
+s,@EXEEXT@,$EXEEXT,;t t
+s,@OBJEXT@,$OBJEXT,;t t
+s,@DEPDIR@,$DEPDIR,;t t
+s,@am__include@,$am__include,;t t
+s,@am__quote@,$am__quote,;t t
+s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t
+s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t
+s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t
+s,@CXXDEPMODE@,$CXXDEPMODE,;t t
+s,@am__fastdepCXX_TRUE@,$am__fastdepCXX_TRUE,;t t
+s,@am__fastdepCXX_FALSE@,$am__fastdepCXX_FALSE,;t t
+s,@CC@,$CC,;t t
+s,@CFLAGS@,$CFLAGS,;t t
+s,@ac_ct_CC@,$ac_ct_CC,;t t
+s,@CCDEPMODE@,$CCDEPMODE,;t t
+s,@am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t
+s,@am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t
+s,@CPP@,$CPP,;t t
+s,@LN_S@,$LN_S,;t t
+s,@RANLIB@,$RANLIB,;t t
+s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t
+s,@EGREP@,$EGREP,;t t
+s,@LIBOBJS@,$LIBOBJS,;t t
+s,@LTLIBOBJS@,$LTLIBOBJS,;t t
+CEOF
+
+_ACEOF
+
+ cat >>$CONFIG_STATUS <<\_ACEOF
+ # Split the substitutions into bite-sized pieces for seds with
+ # small command number limits, like on Digital OSF/1 and HP-UX.
+ ac_max_sed_lines=48
+ ac_sed_frag=1 # Number of current file.
+ ac_beg=1 # First line for current file.
+ ac_end=$ac_max_sed_lines # Line after last line for current file.
+ ac_more_lines=:
+ ac_sed_cmds=
+ while $ac_more_lines; do
+ if test $ac_beg -gt 1; then
+ sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
+ else
+ sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
+ fi
+ if test ! -s $tmp/subs.frag; then
+ ac_more_lines=false
+ else
+ # The purpose of the label and of the branching condition is to
+ # speed up the sed processing (if there are no `@' at all, there
+ # is no need to browse any of the substitutions).
+ # These are the two extra sed commands mentioned above.
+ (echo ':t
+ /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
+ if test -z "$ac_sed_cmds"; then
+ ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
+ else
+ ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
+ fi
+ ac_sed_frag=`expr $ac_sed_frag + 1`
+ ac_beg=$ac_end
+ ac_end=`expr $ac_end + $ac_max_sed_lines`
+ fi
+ done
+ if test -z "$ac_sed_cmds"; then
+ ac_sed_cmds=cat
+ fi
+fi # test -n "$CONFIG_FILES"
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
+ # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+ case $ac_file in
+ - | *:- | *:-:* ) # input from stdin
+ cat >$tmp/stdin
+ ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+ *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+ * ) ac_file_in=$ac_file.in ;;
+ esac
+
+ # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
+ ac_dir=`(dirname "$ac_file") 2>/dev/null ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$ac_file" : 'X\(//\)[^/]' \| \
+ X"$ac_file" : 'X\(//\)$' \| \
+ X"$ac_file" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$ac_file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ { if $as_mkdir_p; then
+ mkdir -p "$ac_dir"
+ else
+ as_dir="$ac_dir"
+ as_dirs=
+ while test ! -d "$as_dir"; do
+ as_dirs="$as_dir $as_dirs"
+ as_dir=`(dirname "$as_dir") 2>/dev/null ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ done
+ test ! -n "$as_dirs" || mkdir $as_dirs
+ fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
+ { (exit 1); exit 1; }; }; }
+
+ ac_builddir=.
+
+if test "$ac_dir" != .; then
+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+ # A "../" for each directory in $ac_dir_suffix.
+ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
+else
+ ac_dir_suffix= ac_top_builddir=
+fi
+
+case $srcdir in
+ .) # No --srcdir option. We are building in place.
+ ac_srcdir=.
+ if test -z "$ac_top_builddir"; then
+ ac_top_srcdir=.
+ else
+ ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
+ fi ;;
+ [\\/]* | ?:[\\/]* ) # Absolute path.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir ;;
+ *) # Relative path.
+ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_builddir$srcdir ;;
+esac
+
+# Do not use `cd foo && pwd` to compute absolute paths, because
+# the directories may not exist.
+case `pwd` in
+.) ac_abs_builddir="$ac_dir";;
+*)
+ case "$ac_dir" in
+ .) ac_abs_builddir=`pwd`;;
+ [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
+ *) ac_abs_builddir=`pwd`/"$ac_dir";;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_builddir=${ac_top_builddir}.;;
+*)
+ case ${ac_top_builddir}. in
+ .) ac_abs_top_builddir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
+ *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_srcdir=$ac_srcdir;;
+*)
+ case $ac_srcdir in
+ .) ac_abs_srcdir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
+ *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_srcdir=$ac_top_srcdir;;
+*)
+ case $ac_top_srcdir in
+ .) ac_abs_top_srcdir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
+ *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
+ esac;;
+esac
+
+
+ case $INSTALL in
+ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+ *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
+ esac
+
+ if test x"$ac_file" != x-; then
+ { echo "$as_me:$LINENO: creating $ac_file" >&5
+echo "$as_me: creating $ac_file" >&6;}
+ rm -f "$ac_file"
+ fi
+ # Let's still pretend it is `configure' which instantiates (i.e., don't
+ # use $as_me), people would be surprised to read:
+ # /* config.h. Generated by config.status. */
+ if test x"$ac_file" = x-; then
+ configure_input=
+ else
+ configure_input="$ac_file. "
+ fi
+ configure_input=$configure_input"Generated from `echo $ac_file_in |
+ sed 's,.*/,,'` by configure."
+
+ # First look for the input files in the build tree, otherwise in the
+ # src tree.
+ ac_file_inputs=`IFS=:
+ for f in $ac_file_in; do
+ case $f in
+ -) echo $tmp/stdin ;;
+ [\\/$]*)
+ # Absolute (can't be DOS-style, as IFS=:)
+ test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+ { (exit 1); exit 1; }; }
+ echo "$f";;
+ *) # Relative
+ if test -f "$f"; then
+ # Build tree
+ echo "$f"
+ elif test -f "$srcdir/$f"; then
+ # Source tree
+ echo "$srcdir/$f"
+ else
+ # /dev/null tree
+ { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+ { (exit 1); exit 1; }; }
+ fi;;
+ esac
+ done` || { (exit 1); exit 1; }
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+ sed "$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s,@configure_input@,$configure_input,;t t
+s,@srcdir@,$ac_srcdir,;t t
+s,@abs_srcdir@,$ac_abs_srcdir,;t t
+s,@top_srcdir@,$ac_top_srcdir,;t t
+s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
+s,@builddir@,$ac_builddir,;t t
+s,@abs_builddir@,$ac_abs_builddir,;t t
+s,@top_builddir@,$ac_top_builddir,;t t
+s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
+s,@INSTALL@,$ac_INSTALL,;t t
+" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
+ rm -f $tmp/stdin
+ if test x"$ac_file" != x-; then
+ mv $tmp/out $ac_file
+ else
+ cat $tmp/out
+ rm -f $tmp/out
+ fi
+
+done
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+
+#
+# CONFIG_HEADER section.
+#
+
+# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
+# NAME is the cpp macro being defined and VALUE is the value it is being given.
+#
+# ac_d sets the value in "#define NAME VALUE" lines.
+ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)'
+ac_dB='[ ].*$,\1#\2'
+ac_dC=' '
+ac_dD=',;t'
+# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
+ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
+ac_uB='$,\1#\2define\3'
+ac_uC=' '
+ac_uD=',;t'
+
+for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue
+ # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+ case $ac_file in
+ - | *:- | *:-:* ) # input from stdin
+ cat >$tmp/stdin
+ ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+ *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+ * ) ac_file_in=$ac_file.in ;;
+ esac
+
+ test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5
+echo "$as_me: creating $ac_file" >&6;}
+
+ # First look for the input files in the build tree, otherwise in the
+ # src tree.
+ ac_file_inputs=`IFS=:
+ for f in $ac_file_in; do
+ case $f in
+ -) echo $tmp/stdin ;;
+ [\\/$]*)
+ # Absolute (can't be DOS-style, as IFS=:)
+ test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+ { (exit 1); exit 1; }; }
+ # Do quote $f, to prevent DOS paths from being IFS'd.
+ echo "$f";;
+ *) # Relative
+ if test -f "$f"; then
+ # Build tree
+ echo "$f"
+ elif test -f "$srcdir/$f"; then
+ # Source tree
+ echo "$srcdir/$f"
+ else
+ # /dev/null tree
+ { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+ { (exit 1); exit 1; }; }
+ fi;;
+ esac
+ done` || { (exit 1); exit 1; }
+ # Remove the trailing spaces.
+ sed 's/[ ]*$//' $ac_file_inputs >$tmp/in
+
+_ACEOF
+
+# Transform confdefs.h into two sed scripts, `conftest.defines' and
+# `conftest.undefs', that substitutes the proper values into
+# config.h.in to produce config.h. The first handles `#define'
+# templates, and the second `#undef' templates.
+# And first: Protect against being on the right side of a sed subst in
+# config.status. Protect against being in an unquoted here document
+# in config.status.
+rm -f conftest.defines conftest.undefs
+# Using a here document instead of a string reduces the quoting nightmare.
+# Putting comments in sed scripts is not portable.
+#
+# `end' is used to avoid that the second main sed command (meant for
+# 0-ary CPP macros) applies to n-ary macro definitions.
+# See the Autoconf documentation for `clear'.
+cat >confdef2sed.sed <<\_ACEOF
+s/[\\&,]/\\&/g
+s,[\\$`],\\&,g
+t clear
+: clear
+s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*\)\(([^)]*)\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp
+t end
+s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp
+: end
+_ACEOF
+# If some macros were called several times there might be several times
+# the same #defines, which is useless. Nevertheless, we may not want to
+# sort them, since we want the *last* AC-DEFINE to be honored.
+uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines
+sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs
+rm -f confdef2sed.sed
+
+# This sed command replaces #undef with comments. This is necessary, for
+# example, in the case of _POSIX_SOURCE, which is predefined and required
+# on some systems where configure will not decide to define it.
+cat >>conftest.undefs <<\_ACEOF
+s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */,
+_ACEOF
+
+# Break up conftest.defines because some shells have a limit on the size
+# of here documents, and old seds have small limits too (100 cmds).
+echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS
+echo ' if grep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS
+echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS
+echo ' :' >>$CONFIG_STATUS
+rm -f conftest.tail
+while grep . conftest.defines >/dev/null
+do
+ # Write a limited-size here document to $tmp/defines.sed.
+ echo ' cat >$tmp/defines.sed <<CEOF' >>$CONFIG_STATUS
+ # Speed up: don't consider the non `#define' lines.
+ echo '/^[ ]*#[ ]*define/!b' >>$CONFIG_STATUS
+ # Work around the forget-to-reset-the-flag bug.
+ echo 't clr' >>$CONFIG_STATUS
+ echo ': clr' >>$CONFIG_STATUS
+ sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS
+ echo 'CEOF
+ sed -f $tmp/defines.sed $tmp/in >$tmp/out
+ rm -f $tmp/in
+ mv $tmp/out $tmp/in
+' >>$CONFIG_STATUS
+ sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail
+ rm -f conftest.defines
+ mv conftest.tail conftest.defines
+done
+rm -f conftest.defines
+echo ' fi # grep' >>$CONFIG_STATUS
+echo >>$CONFIG_STATUS
+
+# Break up conftest.undefs because some shells have a limit on the size
+# of here documents, and old seds have small limits too (100 cmds).
+echo ' # Handle all the #undef templates' >>$CONFIG_STATUS
+rm -f conftest.tail
+while grep . conftest.undefs >/dev/null
+do
+ # Write a limited-size here document to $tmp/undefs.sed.
+ echo ' cat >$tmp/undefs.sed <<CEOF' >>$CONFIG_STATUS
+ # Speed up: don't consider the non `#undef'
+ echo '/^[ ]*#[ ]*undef/!b' >>$CONFIG_STATUS
+ # Work around the forget-to-reset-the-flag bug.
+ echo 't clr' >>$CONFIG_STATUS
+ echo ': clr' >>$CONFIG_STATUS
+ sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS
+ echo 'CEOF
+ sed -f $tmp/undefs.sed $tmp/in >$tmp/out
+ rm -f $tmp/in
+ mv $tmp/out $tmp/in
+' >>$CONFIG_STATUS
+ sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail
+ rm -f conftest.undefs
+ mv conftest.tail conftest.undefs
+done
+rm -f conftest.undefs
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+ # Let's still pretend it is `configure' which instantiates (i.e., don't
+ # use $as_me), people would be surprised to read:
+ # /* config.h. Generated by config.status. */
+ if test x"$ac_file" = x-; then
+ echo "/* Generated by configure. */" >$tmp/config.h
+ else
+ echo "/* $ac_file. Generated by configure. */" >$tmp/config.h
+ fi
+ cat $tmp/in >>$tmp/config.h
+ rm -f $tmp/in
+ if test x"$ac_file" != x-; then
+ if diff $ac_file $tmp/config.h >/dev/null 2>&1; then
+ { echo "$as_me:$LINENO: $ac_file is unchanged" >&5
+echo "$as_me: $ac_file is unchanged" >&6;}
+ else
+ ac_dir=`(dirname "$ac_file") 2>/dev/null ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$ac_file" : 'X\(//\)[^/]' \| \
+ X"$ac_file" : 'X\(//\)$' \| \
+ X"$ac_file" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$ac_file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ { if $as_mkdir_p; then
+ mkdir -p "$ac_dir"
+ else
+ as_dir="$ac_dir"
+ as_dirs=
+ while test ! -d "$as_dir"; do
+ as_dirs="$as_dir $as_dirs"
+ as_dir=`(dirname "$as_dir") 2>/dev/null ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ done
+ test ! -n "$as_dirs" || mkdir $as_dirs
+ fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
+ { (exit 1); exit 1; }; }; }
+
+ rm -f $ac_file
+ mv $tmp/config.h $ac_file
+ fi
+ else
+ cat $tmp/config.h
+ rm -f $tmp/config.h
+ fi
+# Compute $ac_file's index in $config_headers.
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+ case $_am_header in
+ $ac_file | $ac_file:* )
+ break ;;
+ * )
+ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+ esac
+done
+echo "timestamp for $ac_file" >`(dirname $ac_file) 2>/dev/null ||
+$as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X$ac_file : 'X\(//\)[^/]' \| \
+ X$ac_file : 'X\(//\)$' \| \
+ X$ac_file : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X$ac_file |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`/stamp-h$_am_stamp_count
+done
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+
+#
+# CONFIG_COMMANDS section.
+#
+for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue
+ ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
+ ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
+ ac_dir=`(dirname "$ac_dest") 2>/dev/null ||
+$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$ac_dest" : 'X\(//\)[^/]' \| \
+ X"$ac_dest" : 'X\(//\)$' \| \
+ X"$ac_dest" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$ac_dest" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ { if $as_mkdir_p; then
+ mkdir -p "$ac_dir"
+ else
+ as_dir="$ac_dir"
+ as_dirs=
+ while test ! -d "$as_dir"; do
+ as_dirs="$as_dir $as_dirs"
+ as_dir=`(dirname "$as_dir") 2>/dev/null ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ done
+ test ! -n "$as_dirs" || mkdir $as_dirs
+ fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
+ { (exit 1); exit 1; }; }; }
+
+ ac_builddir=.
+
+if test "$ac_dir" != .; then
+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+ # A "../" for each directory in $ac_dir_suffix.
+ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
+else
+ ac_dir_suffix= ac_top_builddir=
+fi
+
+case $srcdir in
+ .) # No --srcdir option. We are building in place.
+ ac_srcdir=.
+ if test -z "$ac_top_builddir"; then
+ ac_top_srcdir=.
+ else
+ ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
+ fi ;;
+ [\\/]* | ?:[\\/]* ) # Absolute path.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir ;;
+ *) # Relative path.
+ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_builddir$srcdir ;;
+esac
+
+# Do not use `cd foo && pwd` to compute absolute paths, because
+# the directories may not exist.
+case `pwd` in
+.) ac_abs_builddir="$ac_dir";;
+*)
+ case "$ac_dir" in
+ .) ac_abs_builddir=`pwd`;;
+ [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
+ *) ac_abs_builddir=`pwd`/"$ac_dir";;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_builddir=${ac_top_builddir}.;;
+*)
+ case ${ac_top_builddir}. in
+ .) ac_abs_top_builddir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
+ *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_srcdir=$ac_srcdir;;
+*)
+ case $ac_srcdir in
+ .) ac_abs_srcdir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
+ *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_srcdir=$ac_top_srcdir;;
+*)
+ case $ac_top_srcdir in
+ .) ac_abs_top_srcdir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
+ *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
+ esac;;
+esac
+
+
+ { echo "$as_me:$LINENO: executing $ac_dest commands" >&5
+echo "$as_me: executing $ac_dest commands" >&6;}
+ case $ac_dest in
+ depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named `Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # So let's grep whole file.
+ if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
+ dirpart=`(dirname "$mf") 2>/dev/null ||
+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$mf" : 'X\(//\)[^/]' \| \
+ X"$mf" : 'X\(//\)$' \| \
+ X"$mf" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$mf" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ else
+ continue
+ fi
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running `make'.
+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+ # When using ansi2knr, U may be empty or an underscore; expand it
+ U=`sed -n 's/^U = //p' < "$mf"`
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`(dirname "$file") 2>/dev/null ||
+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$file" : 'X\(//\)[^/]' \| \
+ X"$file" : 'X\(//\)$' \| \
+ X"$file" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ { if $as_mkdir_p; then
+ mkdir -p $dirpart/$fdir
+ else
+ as_dir=$dirpart/$fdir
+ as_dirs=
+ while test ! -d "$as_dir"; do
+ as_dirs="$as_dir $as_dirs"
+ as_dir=`(dirname "$as_dir") 2>/dev/null ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ done
+ test ! -n "$as_dirs" || mkdir $as_dirs
+ fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5
+echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;}
+ { (exit 1); exit 1; }; }; }
+
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
+done
+ ;;
+ esac
+done
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+
+{ (exit 0); exit 0; }
+_ACEOF
+chmod +x $CONFIG_STATUS
+ac_clean_files=$ac_clean_files_save
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded. So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status. When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+ ac_cs_success=:
+ ac_config_status_args=
+ test "$silent" = yes &&
+ ac_config_status_args="$ac_config_status_args --quiet"
+ exec 5>/dev/null
+ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+ exec 5>>config.log
+ # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+ # would make configure fail if this is the last instruction.
+ $ac_cs_success || { (exit 1); exit 1; }
+fi
+
--- /dev/null
+AC_PREREQ(2.59)
+AC_INIT(l7vsd)
+PACKAGENAME=l7vsd
+VERSION=3.0.0-0
+
+AM_INIT_AUTOMAKE($PACKAGENAME, $VERSION, no-define )
+AC_CONFIG_SRCDIR([config.h.in])
+AC_CONFIG_HEADER([config.h])
+
+# Checks for programs.
+AC_PROG_CXX
+AC_PROG_CC
+AC_PROG_CPP
+AC_PROG_INSTALL
+AC_PROG_LN_S
+AC_PROG_MAKE_SET
+AC_PROG_RANLIB
+
+# Checks for libraries.
+AC_CHECK_LIB(log4cxx, main, :,
+ [AC_MSG_ERROR( l7vsd require log4cxx library. )] )
+AC_CHECK_LIB(rt, main, :,
+ [AC_MSG_ERROR( l7vsd require rt library. )] )
+
+# Checks for header files.
+AC_CHECK_HEADERS([limits.h unistd.h])
+
+# Checks for typedefs, structures, and compiler characteristics.
+AC_HEADER_STDBOOL
+AC_C_CONST
+AC_C_INLINE
+AC_TYPE_SIZE_T
+AC_STRUCT_TM
+
+# Checks for library functions.
+AC_HEADER_STDC
+AC_FUNC_MKTIME
+AC_FUNC_STRFTIME
+AC_CHECK_FUNCS([gethostname localtime_r memset])
+
+# application-specific option
+if test `uname -m` == "x86_64"; then
+ AC_SUBST( libdir, [/usr/lib64] )
+else
+ AC_SUBST( libdir, [/usr/lib] )
+fi
+
+AC_SUBST(CC,g++)
+AC_SUBST(exec_prefix, [/usr] )
+#AC_CONFIG_FILES([parameter/Makefile]
+# [logger/Makefile]
+# [module/schedule/Makefile]
+# [module/protocol/Makefile]
+# [Makefile]
+# [src/Makefile])
+AC_CONFIG_FILES([parameter/Makefile]
+ [logger/Makefile]
+ [Makefile])
+AC_OUTPUT(l7vsd.spec)
--- /dev/null
+#! /bin/sh
+# depcomp - compile a program generating dependencies as side-effects
+
+scriptversion=2005-07-09.11
+
+# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
+
+case $1 in
+ '')
+ echo "$0: No command. Try \`$0 --help' for more information." 1>&2
+ exit 1;
+ ;;
+ -h | --h*)
+ cat <<\EOF
+Usage: depcomp [--help] [--version] PROGRAM [ARGS]
+
+Run PROGRAMS ARGS to compile a file, generating dependencies
+as side-effects.
+
+Environment variables:
+ depmode Dependency tracking mode.
+ source Source file read by `PROGRAMS ARGS'.
+ object Object file output by `PROGRAMS ARGS'.
+ DEPDIR directory where to store dependencies.
+ depfile Dependency file to output.
+ tmpdepfile Temporary file to use when outputing dependencies.
+ libtool Whether libtool is used (yes/no).
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+ exit $?
+ ;;
+ -v | --v*)
+ echo "depcomp $scriptversion"
+ exit $?
+ ;;
+esac
+
+if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+ echo "depcomp: Variables source, object and depmode must be set" 1>&2
+ exit 1
+fi
+
+# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
+depfile=${depfile-`echo "$object" |
+ sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
+tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+
+rm -f "$tmpdepfile"
+
+# Some modes work just like other modes, but use different flags. We
+# parameterize here, but still list the modes in the big case below,
+# to make depend.m4 easier to write. Note that we *cannot* use a case
+# here, because this file can only contain one case statement.
+if test "$depmode" = hp; then
+ # HP compiler uses -M and no extra arg.
+ gccflag=-M
+ depmode=gcc
+fi
+
+if test "$depmode" = dashXmstdout; then
+ # This is just like dashmstdout with a different argument.
+ dashmflag=-xM
+ depmode=dashmstdout
+fi
+
+case "$depmode" in
+gcc3)
+## gcc 3 implements dependency tracking that does exactly what
+## we want. Yay! Note: for some reason libtool 1.4 doesn't like
+## it if -MD -MP comes after the -MF stuff. Hmm.
+ "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ mv "$tmpdepfile" "$depfile"
+ ;;
+
+gcc)
+## There are various ways to get dependency output from gcc. Here's
+## why we pick this rather obscure method:
+## - Don't want to use -MD because we'd like the dependencies to end
+## up in a subdir. Having to rename by hand is ugly.
+## (We might end up doing this anyway to support other compilers.)
+## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
+## -MM, not -M (despite what the docs say).
+## - Using -M directly means running the compiler twice (even worse
+## than renaming).
+ if test -z "$gccflag"; then
+ gccflag=-MD,
+ fi
+ "$@" -Wp,"$gccflag$tmpdepfile"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
+## The second -e expression handles DOS-style file names with drive letters.
+ sed -e 's/^[^:]*: / /' \
+ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+## This next piece of magic avoids the `deleted header file' problem.
+## The problem is that when a header file which appears in a .P file
+## is deleted, the dependency causes make to die (because there is
+## typically no way to rebuild the header). We avoid this by adding
+## dummy dependencies for each header file. Too bad gcc doesn't do
+## this for us directly.
+ tr ' ' '
+' < "$tmpdepfile" |
+## Some versions of gcc put a space before the `:'. On the theory
+## that the space means something, we add a space to the output as
+## well.
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+hp)
+ # This case exists only to let depend.m4 do its work. It works by
+ # looking at the text of this script. This case will never be run,
+ # since it is checked for above.
+ exit 1
+ ;;
+
+sgi)
+ if test "$libtool" = yes; then
+ "$@" "-Wp,-MDupdate,$tmpdepfile"
+ else
+ "$@" -MDupdate "$tmpdepfile"
+ fi
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+
+ if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
+ echo "$object : \\" > "$depfile"
+
+ # Clip off the initial element (the dependent). Don't try to be
+ # clever and replace this with sed code, as IRIX sed won't handle
+ # lines with more than a fixed number of characters (4096 in
+ # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
+ # the IRIX cc adds comments like `#:fec' to the end of the
+ # dependency line.
+ tr ' ' '
+' < "$tmpdepfile" \
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
+ tr '
+' ' ' >> $depfile
+ echo >> $depfile
+
+ # The second pass generates a dummy entry for each header file.
+ tr ' ' '
+' < "$tmpdepfile" \
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+ >> $depfile
+ else
+ # The sourcefile does not contain any dependencies, so just
+ # store a dummy comment line, to avoid errors with the Makefile
+ # "include basename.Plo" scheme.
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+aix)
+ # The C for AIX Compiler uses -M and outputs the dependencies
+ # in a .u file. In older versions, this file always lives in the
+ # current directory. Also, the AIX compiler puts `$object:' at the
+ # start of each line; $object doesn't have directory information.
+ # Version 6 uses the directory in both cases.
+ stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
+ tmpdepfile="$stripped.u"
+ if test "$libtool" = yes; then
+ "$@" -Wc,-M
+ else
+ "$@" -M
+ fi
+ stat=$?
+
+ if test -f "$tmpdepfile"; then :
+ else
+ stripped=`echo "$stripped" | sed 's,^.*/,,'`
+ tmpdepfile="$stripped.u"
+ fi
+
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+
+ if test -f "$tmpdepfile"; then
+ outname="$stripped.o"
+ # Each line is of the form `foo.o: dependent.h'.
+ # Do two passes, one to just change these to
+ # `$object: dependent.h' and one to simply `dependent.h:'.
+ sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
+ sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
+ else
+ # The sourcefile does not contain any dependencies, so just
+ # store a dummy comment line, to avoid errors with the Makefile
+ # "include basename.Plo" scheme.
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+icc)
+ # Intel's C compiler understands `-MD -MF file'. However on
+ # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
+ # ICC 7.0 will fill foo.d with something like
+ # foo.o: sub/foo.c
+ # foo.o: sub/foo.h
+ # which is wrong. We want:
+ # sub/foo.o: sub/foo.c
+ # sub/foo.o: sub/foo.h
+ # sub/foo.c:
+ # sub/foo.h:
+ # ICC 7.1 will output
+ # foo.o: sub/foo.c sub/foo.h
+ # and will wrap long lines using \ :
+ # foo.o: sub/foo.c ... \
+ # sub/foo.h ... \
+ # ...
+
+ "$@" -MD -MF "$tmpdepfile"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ # Each line is of the form `foo.o: dependent.h',
+ # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
+ # Do two passes, one to just change these to
+ # `$object: dependent.h' and one to simply `dependent.h:'.
+ sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
+ # Some versions of the HPUX 10.20 sed can't process this invocation
+ # correctly. Breaking it into two sed invocations is a workaround.
+ sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
+ sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+tru64)
+ # The Tru64 compiler uses -MD to generate dependencies as a side
+ # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
+ # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+ # dependencies in `foo.d' instead, so we check for that too.
+ # Subdirectories are respected.
+ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+ test "x$dir" = "x$object" && dir=
+ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+
+ if test "$libtool" = yes; then
+ # With Tru64 cc, shared objects can also be used to make a
+ # static library. This mecanism is used in libtool 1.4 series to
+ # handle both shared and static libraries in a single compilation.
+ # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
+ #
+ # With libtool 1.5 this exception was removed, and libtool now
+ # generates 2 separate objects for the 2 libraries. These two
+ # compilations output dependencies in in $dir.libs/$base.o.d and
+ # in $dir$base.o.d. We have to check for both files, because
+ # one of the two compilations can be disabled. We should prefer
+ # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+ # automatically cleaned when .libs/ is deleted, while ignoring
+ # the former would cause a distcleancheck panic.
+ tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4
+ tmpdepfile2=$dir$base.o.d # libtool 1.5
+ tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5
+ tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504
+ "$@" -Wc,-MD
+ else
+ tmpdepfile1=$dir$base.o.d
+ tmpdepfile2=$dir$base.d
+ tmpdepfile3=$dir$base.d
+ tmpdepfile4=$dir$base.d
+ "$@" -MD
+ fi
+
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+ exit $stat
+ fi
+
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+ do
+ test -f "$tmpdepfile" && break
+ done
+ if test -f "$tmpdepfile"; then
+ sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+ # That's a tab and a space in the [].
+ sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+ else
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+#nosideeffect)
+ # This comment above is used by automake to tell side-effect
+ # dependency tracking mechanisms from slower ones.
+
+dashmstdout)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout, regardless of -o.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test $1 != '--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ # Remove `-o $object'.
+ IFS=" "
+ for arg
+ do
+ case $arg in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift # fnord
+ shift # $arg
+ ;;
+ esac
+ done
+
+ test -z "$dashmflag" && dashmflag=-M
+ # Require at least two characters before searching for `:'
+ # in the target name. This is to cope with DOS-style filenames:
+ # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
+ "$@" $dashmflag |
+ sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile"
+ rm -f "$depfile"
+ cat < "$tmpdepfile" > "$depfile"
+ tr ' ' '
+' < "$tmpdepfile" | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+dashXmstdout)
+ # This case only exists to satisfy depend.m4. It is never actually
+ # run, as this mode is specially recognized in the preamble.
+ exit 1
+ ;;
+
+makedepend)
+ "$@" || exit $?
+ # Remove any Libtool call
+ if test "$libtool" = yes; then
+ while test $1 != '--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+ # X makedepend
+ shift
+ cleared=no
+ for arg in "$@"; do
+ case $cleared in
+ no)
+ set ""; shift
+ cleared=yes ;;
+ esac
+ case "$arg" in
+ -D*|-I*)
+ set fnord "$@" "$arg"; shift ;;
+ # Strip any option that makedepend may not understand. Remove
+ # the object too, otherwise makedepend will parse it as a source file.
+ -*|$object)
+ ;;
+ *)
+ set fnord "$@" "$arg"; shift ;;
+ esac
+ done
+ obj_suffix="`echo $object | sed 's/^.*\././'`"
+ touch "$tmpdepfile"
+ ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
+ rm -f "$depfile"
+ cat < "$tmpdepfile" > "$depfile"
+ sed '1,2d' "$tmpdepfile" | tr ' ' '
+' | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile" "$tmpdepfile".bak
+ ;;
+
+cpp)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test $1 != '--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ # Remove `-o $object'.
+ IFS=" "
+ for arg
+ do
+ case $arg in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift # fnord
+ shift # $arg
+ ;;
+ esac
+ done
+
+ "$@" -E |
+ sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
+ sed '$ s: \\$::' > "$tmpdepfile"
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ cat < "$tmpdepfile" >> "$depfile"
+ sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+msvisualcpp)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout, regardless of -o,
+ # because we must use -o when running libtool.
+ "$@" || exit $?
+ IFS=" "
+ for arg
+ do
+ case "$arg" in
+ "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
+ set fnord "$@"
+ shift
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift
+ shift
+ ;;
+ esac
+ done
+ "$@" -E |
+ sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
+ echo " " >> "$depfile"
+ . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+none)
+ exec "$@"
+ ;;
+
+*)
+ echo "Unknown depmode $depmode" 1>&2
+ exit 1
+ ;;
+esac
+
+exit 0
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
--- /dev/null
+#!/bin/sh
+# install - install a program, script, or datafile
+
+scriptversion=2005-05-14.22
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch. It can only install one file at a time, a restriction
+# shared with many OS's install programs.
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+chmodcmd="$chmodprog 0755"
+chowncmd=
+chgrpcmd=
+stripcmd=
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=
+dst=
+dir_arg=
+dstarg=
+no_target_directory=
+
+usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+ or: $0 [OPTION]... SRCFILES... DIRECTORY
+ or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+ or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+-c (ignored)
+-d create directories instead of installing files.
+-g GROUP $chgrpprog installed files to GROUP.
+-m MODE $chmodprog installed files to MODE.
+-o USER $chownprog installed files to USER.
+-s $stripprog installed files.
+-t DIRECTORY install into DIRECTORY.
+-T report an error if DSTFILE is a directory.
+--help display this help and exit.
+--version display version info and exit.
+
+Environment variables override the default commands:
+ CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
+"
+
+while test -n "$1"; do
+ case $1 in
+ -c) shift
+ continue;;
+
+ -d) dir_arg=true
+ shift
+ continue;;
+
+ -g) chgrpcmd="$chgrpprog $2"
+ shift
+ shift
+ continue;;
+
+ --help) echo "$usage"; exit $?;;
+
+ -m) chmodcmd="$chmodprog $2"
+ shift
+ shift
+ continue;;
+
+ -o) chowncmd="$chownprog $2"
+ shift
+ shift
+ continue;;
+
+ -s) stripcmd=$stripprog
+ shift
+ continue;;
+
+ -t) dstarg=$2
+ shift
+ shift
+ continue;;
+
+ -T) no_target_directory=true
+ shift
+ continue;;
+
+ --version) echo "$0 $scriptversion"; exit $?;;
+
+ *) # When -d is used, all remaining arguments are directories to create.
+ # When -t is used, the destination is already specified.
+ test -n "$dir_arg$dstarg" && break
+ # Otherwise, the last argument is the destination. Remove it from $@.
+ for arg
+ do
+ if test -n "$dstarg"; then
+ # $@ is not empty: it contains at least $arg.
+ set fnord "$@" "$dstarg"
+ shift # fnord
+ fi
+ shift # arg
+ dstarg=$arg
+ done
+ break;;
+ esac
+done
+
+if test -z "$1"; then
+ if test -z "$dir_arg"; then
+ echo "$0: no input file specified." >&2
+ exit 1
+ fi
+ # It's OK to call `install-sh -d' without argument.
+ # This can happen when creating conditional directories.
+ exit 0
+fi
+
+for src
+do
+ # Protect names starting with `-'.
+ case $src in
+ -*) src=./$src ;;
+ esac
+
+ if test -n "$dir_arg"; then
+ dst=$src
+ src=
+
+ if test -d "$dst"; then
+ mkdircmd=:
+ chmodcmd=
+ else
+ mkdircmd=$mkdirprog
+ fi
+ else
+ # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+ # might cause directories to be created, which would be especially bad
+ # if $src (and thus $dsttmp) contains '*'.
+ if test ! -f "$src" && test ! -d "$src"; then
+ echo "$0: $src does not exist." >&2
+ exit 1
+ fi
+
+ if test -z "$dstarg"; then
+ echo "$0: no destination specified." >&2
+ exit 1
+ fi
+
+ dst=$dstarg
+ # Protect names starting with `-'.
+ case $dst in
+ -*) dst=./$dst ;;
+ esac
+
+ # If destination is a directory, append the input filename; won't work
+ # if double slashes aren't ignored.
+ if test -d "$dst"; then
+ if test -n "$no_target_directory"; then
+ echo "$0: $dstarg: Is a directory" >&2
+ exit 1
+ fi
+ dst=$dst/`basename "$src"`
+ fi
+ fi
+
+ # This sed command emulates the dirname command.
+ dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'`
+
+ # Make sure that the destination directory exists.
+
+ # Skip lots of stat calls in the usual case.
+ if test ! -d "$dstdir"; then
+ defaultIFS='
+ '
+ IFS="${IFS-$defaultIFS}"
+
+ oIFS=$IFS
+ # Some sh's can't handle IFS=/ for some reason.
+ IFS='%'
+ set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
+ shift
+ IFS=$oIFS
+
+ pathcomp=
+
+ while test $# -ne 0 ; do
+ pathcomp=$pathcomp$1
+ shift
+ if test ! -d "$pathcomp"; then
+ $mkdirprog "$pathcomp"
+ # mkdir can fail with a `File exist' error in case several
+ # install-sh are creating the directory concurrently. This
+ # is OK.
+ test -d "$pathcomp" || exit
+ fi
+ pathcomp=$pathcomp/
+ done
+ fi
+
+ if test -n "$dir_arg"; then
+ $doit $mkdircmd "$dst" \
+ && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
+ && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
+ && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
+ && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
+
+ else
+ dstfile=`basename "$dst"`
+
+ # Make a couple of temp file names in the proper directory.
+ dsttmp=$dstdir/_inst.$$_
+ rmtmp=$dstdir/_rm.$$_
+
+ # Trap to clean up those temp files at exit.
+ trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+ trap '(exit $?); exit' 1 2 13 15
+
+ # Copy the file name to the temp name.
+ $doit $cpprog "$src" "$dsttmp" &&
+
+ # and set any options; do chmod last to preserve setuid bits.
+ #
+ # If any of these fail, we abort the whole thing. If we want to
+ # ignore errors from any of these, just make sure not to ignore
+ # errors from the above "$doit $cpprog $src $dsttmp" command.
+ #
+ { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
+ && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
+ && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
+ && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
+
+ # Now rename the file to the real destination.
+ { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
+ || {
+ # The rename failed, perhaps because mv can't rename something else
+ # to itself, or perhaps because mv is so ancient that it does not
+ # support -f.
+
+ # Now remove or move aside any old file at destination location.
+ # We try this two ways since rm can't unlink itself on some
+ # systems and the destination file might be busy for other
+ # reasons. In this case, the final cleanup might fail but the new
+ # file should still install successfully.
+ {
+ if test -f "$dstdir/$dstfile"; then
+ $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
+ || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
+ || {
+ echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
+ (exit 1); exit 1
+ }
+ else
+ :
+ fi
+ } &&
+
+ # Now rename the file to the real destination.
+ $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
+ }
+ }
+ fi || { (exit 1); exit 1; }
+done
+
+# The final little trick to "correctly" pass the exit status to the exit trap.
+{
+ (exit 0); exit 0
+}
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
--- /dev/null
+%define prefix /usr
+
+#Uncomment these if they are not defined by your rpm macros file
+%define _sysconfdir /etc
+%define _localstatedir /var
+
+Summary: UltraMonkey-l7 Layer7 software load brancer server
+Name: l7vsd
+Version: 3.0.0
+Release: 0
+License: BOOST SOFTWARE LICENSE
+Packager: Norihisa NAKAI
+Group: Network
+Source0: %{name}-%{version}-%{release}.tar.gz
+BuildRoot: /var/tmp/%{name}-%{version}-root
+Docdir: %{prefix}/doc
+Provides: %{name}-%{version}-%{release}
+BuildPrereq: automake autoconf libtool
+AutoReqProv: no
+#Requires:
+
+%description
+Layer7 load barancer server daemon that works with TCP/UDP barancing
+
+%prep
+rm -rf ${RPM_BUILD_ROOT}
+%setup
+
+%build
+
+# I am providing my own configure macro replacement. Hopefully this
+# will result in fewer portability problems than using the one supplied
+# by various vendours. I fear that I hope in vein.
+CFLAGS="${CFLAGS:-%optflags}" ; export CFLAGS
+if [ -f confgure.in ]; then
+ aclocal
+ libtoolize --force --copy
+ automake
+ autoconf
+fi
+./configure %{_target_platform} \
+ --prefix=%{_prefix} \
+ --exec-prefix=%{_exec_prefix} \
+ --bindir=%{_bindir} \
+ --sbindir=%{_sbindir} \
+ --sysconfdir=%{_sysconfdir} \
+ --datadir=%{_datadir} \
+ --includedir=%{_includedir} \
+ --libdir=%{_libdir} \
+ --libexecdir=%{_libexecdir} \
+ --localstatedir=%{_localstatedir} \
+ --sharedstatedir=%{_sharedstatedir} \
+ --mandir=%{_mandir} \
+ --infodir=%{_infodir}
+
+make -j2
+
+%install
+# rm -rf ${RPM_BUILD_ROOT}
+
+# Manually install init script
+#mkdir -p ${RPM_BUILD_ROOT}/etc/init.d/
+#install -c -m 755 \
+# ${RPM_BUILD_DIR}/%{name}-%{version}/etc/init.d/sslproxy.rh \
+# ${RPM_BUILD_ROOT}/etc/init.d/sslproxy
+
+# Install eveything else
+#make DESTDIR=$RPM_BUILD_ROOT install
+
+mkdir -p $RPM_BUILD_ROOT%{_sbindir}
+mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}
+mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/init.d
+mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/l7vs
+mkdir -p $RPM_BUILD_ROOT%{_localstatedir}/log/l7vs/
+
+install -c -m 755 -D src/l7vsadm $RPM_BUILD_ROOT%{_sbindir}
+
+install -c -m 755 -D src/l7vsd $RPM_BUILD_ROOT%{_sibdir}
+
+install -c -m 755 -D init.d/sslproxy $RPM_BUILD_ROOT%{_sysconfdir}/init.d
+
+install -c -m 644 -D conf/sslproxy.logger_init.cf $RPM_BUILD_ROOT%{_sysconfdir}/l7vs/sslproxy
+install -c -m 644 -D conf/sslproxy.target_1.cf $RPM_BUILD_ROOT%{_sysconfdir}/l7vs/sslproxy
+install -c -m 644 -D conf/sslproxy.target_2.cf $RPM_BUILD_ROOT%{_sysconfdir}/l7vs/sslproxy
+install -c -m 644 -D conf/sslproxyadm.cf $RPM_BUILD_ROOT%{_sysconfdir}/l7vs/sslproxy
+install -c -m 644 -D conf/sslproxyadm.logrotate $RPM_BUILD_ROOT%/etc/logrotate.d/sslproxy
+
+install -c -m 644 -D sslfiles/root.pem $RPM_BUILD_ROOT%{_sysconfdir}/l7vs/sslproxy
+install -c -m 644 -D sslfiles/server.pem $RPM_BUILD_ROOT%{_sysconfdir}/l7vs/sslproxy
+install -c -m 644 -D sslfiles/passwd.txt $RPM_BUILD_ROOT%{_sysconfdir}/l7vs/sslproxy
+install -c -m 644 -D sslfiles/dh512.pem $RPM_BUILD_ROOT%{_sysconfdir}/l7vs/sslproxy
+
+%clean
+rm -rf $RPM_BUILD_ROOT
+
+%files
+%defattr(-, root, root, 0755)
+%{_sbindir}
+%config %{_sysconfdir}/init.d/*
+%config %{_sysconfdir}/l7vs/sslproxy/*
+
+#%doc README COPYING
+#%{_mandir}
+
+%changelog
+
-noinst_LIBRARIES= libl7vsd_logger.a libl7vsadm_logger.a libsnmpagent_logger.a
+noinst_LIBRARIES= liblogger.a
AUTOMAKE_OPTIONS = foreign
-libl7vsd_logger_a_SOURCES = \
- logger_enum.h \
- logger.h \
- logger_impl.h \
- logger.cpp \
- logger_impl.cpp \
- strict_time_based_rolling_policy.h \
- strict_time_based_rolling_policy.cpp \
- time_and_size_based_rolling_policy.h \
- time_and_size_based_rolling_policy.cpp
+liblogger_a_SOURCES = \
+ logger_enum.h \
+ logger.h \
+ logger_impl.h \
+ logger.cpp \
+ logger_impl.cpp \
+ strict_time_based_rolling_policy.h \
+ strict_time_based_rolling_policy.cpp \
+ time_and_size_based_rolling_policy.h \
+ time_and_size_based_rolling_policy.cpp
-libl7vsd_logger_a_CPPFLAGS = -O2 -g -I../include -I../snmpagent -I../parameter \
- -DLOGGER_PROCESS_VSD \
- -DVERSION=\"$(VERSION)\"
-
-libl7vsadm_logger_a_SOURCES = \
- logger_enum.h \
- logger.h \
- logger_impl.h \
- logger.cpp \
- logger_impl.cpp \
- strict_time_based_rolling_policy.h \
- strict_time_based_rolling_policy.cpp \
- time_and_size_based_rolling_policy.h \
- time_and_size_based_rolling_policy.cpp
-
-libl7vsadm_logger_a_CPPFLAGS = -O2 -g -I../include -I../parameter \
- -DLOGGER_PROCESS_ADM \
- -DVERSION=\"$(VERSION)\"
-
-libsnmpagent_logger_a_SOURCES = \
- logger_enum.h \
- logger.h \
- logger_impl.h \
- logger.cpp \
- logger_impl.cpp \
- strict_time_based_rolling_policy.h \
- strict_time_based_rolling_policy.cpp \
- time_and_size_based_rolling_policy.h \
- time_and_size_based_rolling_policy.cpp
-
-libsnmpagent_logger_a_CPPFLAGS = -O2 -g -I../include -I../parameter \
- -DLOGGER_PROCESS_SNM \
- -DVERSION=\"$(VERSION)\"
+liblogger_a_CPPFLAGS = -O2 -g -I../include -I../parameter \
+ -DVERSION=\"$(VERSION)\"
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
subdir = logger
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
LIBRARIES = $(noinst_LIBRARIES)
+AR = ar
ARFLAGS = cru
-libl7vsadm_logger_a_AR = $(AR) $(ARFLAGS)
-libl7vsadm_logger_a_LIBADD =
-am_libl7vsadm_logger_a_OBJECTS = libl7vsadm_logger_a-logger.$(OBJEXT) \
- libl7vsadm_logger_a-logger_impl.$(OBJEXT) \
- libl7vsadm_logger_a-strict_time_based_rolling_policy.$(OBJEXT) \
- libl7vsadm_logger_a-time_and_size_based_rolling_policy.$(OBJEXT)
-libl7vsadm_logger_a_OBJECTS = $(am_libl7vsadm_logger_a_OBJECTS)
-libl7vsd_logger_a_AR = $(AR) $(ARFLAGS)
-libl7vsd_logger_a_LIBADD =
-am_libl7vsd_logger_a_OBJECTS = libl7vsd_logger_a-logger.$(OBJEXT) \
- libl7vsd_logger_a-logger_impl.$(OBJEXT) \
- libl7vsd_logger_a-strict_time_based_rolling_policy.$(OBJEXT) \
- libl7vsd_logger_a-time_and_size_based_rolling_policy.$(OBJEXT)
-libl7vsd_logger_a_OBJECTS = $(am_libl7vsd_logger_a_OBJECTS)
-libsnmpagent_logger_a_AR = $(AR) $(ARFLAGS)
-libsnmpagent_logger_a_LIBADD =
-am_libsnmpagent_logger_a_OBJECTS = \
- libsnmpagent_logger_a-logger.$(OBJEXT) \
- libsnmpagent_logger_a-logger_impl.$(OBJEXT) \
- libsnmpagent_logger_a-strict_time_based_rolling_policy.$(OBJEXT) \
- libsnmpagent_logger_a-time_and_size_based_rolling_policy.$(OBJEXT)
-libsnmpagent_logger_a_OBJECTS = $(am_libsnmpagent_logger_a_OBJECTS)
+liblogger_a_AR = $(AR) $(ARFLAGS)
+liblogger_a_LIBADD =
+am_liblogger_a_OBJECTS = liblogger_a-logger.$(OBJEXT) \
+ liblogger_a-logger_impl.$(OBJEXT) \
+ liblogger_a-strict_time_based_rolling_policy.$(OBJEXT) \
+ liblogger_a-time_and_size_based_rolling_policy.$(OBJEXT)
+liblogger_a_OBJECTS = $(am_liblogger_a_OBJECTS)
DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__depfiles_maybe = depfiles
CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
-LTCXXCOMPILE = $(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) \
- $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
- $(AM_CXXFLAGS) $(CXXFLAGS)
CXXLD = $(CXX)
-CXXLINK = $(LIBTOOL) --tag=CXX --mode=link $(CXXLD) $(AM_CXXFLAGS) \
- $(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+CXXLINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) \
+ -o $@
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \
- $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
- $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
-LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
- $(AM_LDFLAGS) $(LDFLAGS) -o $@
-SOURCES = $(libl7vsadm_logger_a_SOURCES) $(libl7vsd_logger_a_SOURCES) \
- $(libsnmpagent_logger_a_SOURCES)
-DIST_SOURCES = $(libl7vsadm_logger_a_SOURCES) \
- $(libl7vsd_logger_a_SOURCES) $(libsnmpagent_logger_a_SOURCES)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+SOURCES = $(liblogger_a_SOURCES)
+DIST_SOURCES = $(liblogger_a_SOURCES)
ETAGS = etags
CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
-AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CXX = @CXX@
-CXXCPP = @CXXCPP@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
-ECHO = @ECHO@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
-GLIB_CFLAGS = @GLIB_CFLAGS@
-GLIB_GENMARSHAL = @GLIB_GENMARSHAL@
-GLIB_LIBS = @GLIB_LIBS@
-GLIB_MKENUMS = @GLIB_MKENUMS@
-GOBJECT_QUERY = @GOBJECT_QUERY@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
RANLIB = @RANLIB@
-SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
VERSION = @VERSION@
-ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
ac_ct_RANLIB = @ac_ct_RANLIB@
ac_ct_STRIP = @ac_ct_STRIP@
am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
-build = @build@
build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
datadir = @datadir@
exec_prefix = @exec_prefix@
-host = @host@
host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
-l7vs_maxvs = @l7vs_maxvs@
-l7vs_moddir = @l7vs_moddir@
-l7vsadm_sockdir = @l7vsadm_sockdir@
libdir = @libdir@
libexecdir = @libexecdir@
localstatedir = @localstatedir@
program_transform_name = @program_transform_name@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
-snmpagent_libs = @snmpagent_libs@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
-noinst_LIBRARIES = libl7vsd_logger.a libl7vsadm_logger.a libsnmpagent_logger.a
+noinst_LIBRARIES = liblogger.a
AUTOMAKE_OPTIONS = foreign
-libl7vsd_logger_a_SOURCES = \
- logger_enum.h \
- logger.h \
- logger_impl.h \
- logger.cpp \
- logger_impl.cpp \
- strict_time_based_rolling_policy.h \
- strict_time_based_rolling_policy.cpp \
- time_and_size_based_rolling_policy.h \
- time_and_size_based_rolling_policy.cpp
-
-libl7vsd_logger_a_CPPFLAGS = -O2 -g -I../include -I../snmpagent -I../parameter \
- -DLOGGER_PROCESS_VSD \
- -DVERSION=\"$(VERSION)\"
-
-libl7vsadm_logger_a_SOURCES = \
- logger_enum.h \
- logger.h \
- logger_impl.h \
- logger.cpp \
- logger_impl.cpp \
- strict_time_based_rolling_policy.h \
- strict_time_based_rolling_policy.cpp \
- time_and_size_based_rolling_policy.h \
- time_and_size_based_rolling_policy.cpp
-
-libl7vsadm_logger_a_CPPFLAGS = -O2 -g -I../include -I../parameter \
- -DLOGGER_PROCESS_ADM \
- -DVERSION=\"$(VERSION)\"
-
-libsnmpagent_logger_a_SOURCES = \
- logger_enum.h \
- logger.h \
- logger_impl.h \
- logger.cpp \
- logger_impl.cpp \
- strict_time_based_rolling_policy.h \
- strict_time_based_rolling_policy.cpp \
- time_and_size_based_rolling_policy.h \
- time_and_size_based_rolling_policy.cpp
-
-libsnmpagent_logger_a_CPPFLAGS = -O2 -g -I../include -I../parameter \
- -DLOGGER_PROCESS_SNM \
- -DVERSION=\"$(VERSION)\"
+liblogger_a_SOURCES = \
+ logger_enum.h \
+ logger.h \
+ logger_impl.h \
+ logger.cpp \
+ logger_impl.cpp \
+ strict_time_based_rolling_policy.h \
+ strict_time_based_rolling_policy.cpp \
+ time_and_size_based_rolling_policy.h \
+ time_and_size_based_rolling_policy.cpp
+
+liblogger_a_CPPFLAGS = -O2 -g -I../include -I../parameter \
+ -DVERSION=\"$(VERSION)\"
all: all-am
.SUFFIXES:
-.SUFFIXES: .cpp .lo .o .obj
+.SUFFIXES: .cpp .o .obj
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
clean-noinstLIBRARIES:
-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-libl7vsadm_logger.a: $(libl7vsadm_logger_a_OBJECTS) $(libl7vsadm_logger_a_DEPENDENCIES)
- -rm -f libl7vsadm_logger.a
- $(libl7vsadm_logger_a_AR) libl7vsadm_logger.a $(libl7vsadm_logger_a_OBJECTS) $(libl7vsadm_logger_a_LIBADD)
- $(RANLIB) libl7vsadm_logger.a
-libl7vsd_logger.a: $(libl7vsd_logger_a_OBJECTS) $(libl7vsd_logger_a_DEPENDENCIES)
- -rm -f libl7vsd_logger.a
- $(libl7vsd_logger_a_AR) libl7vsd_logger.a $(libl7vsd_logger_a_OBJECTS) $(libl7vsd_logger_a_LIBADD)
- $(RANLIB) libl7vsd_logger.a
-libsnmpagent_logger.a: $(libsnmpagent_logger_a_OBJECTS) $(libsnmpagent_logger_a_DEPENDENCIES)
- -rm -f libsnmpagent_logger.a
- $(libsnmpagent_logger_a_AR) libsnmpagent_logger.a $(libsnmpagent_logger_a_OBJECTS) $(libsnmpagent_logger_a_LIBADD)
- $(RANLIB) libsnmpagent_logger.a
+liblogger.a: $(liblogger_a_OBJECTS) $(liblogger_a_DEPENDENCIES)
+ -rm -f liblogger.a
+ $(liblogger_a_AR) liblogger.a $(liblogger_a_OBJECTS) $(liblogger_a_LIBADD)
+ $(RANLIB) liblogger.a
mostlyclean-compile:
-rm -f *.$(OBJEXT)
distclean-compile:
-rm -f *.tab.c
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libl7vsadm_logger_a-logger.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libl7vsadm_logger_a-logger_impl.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libl7vsadm_logger_a-strict_time_based_rolling_policy.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libl7vsadm_logger_a-time_and_size_based_rolling_policy.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libl7vsd_logger_a-logger.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libl7vsd_logger_a-logger_impl.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libl7vsd_logger_a-strict_time_based_rolling_policy.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libl7vsd_logger_a-time_and_size_based_rolling_policy.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libsnmpagent_logger_a-logger.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libsnmpagent_logger_a-logger_impl.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libsnmpagent_logger_a-strict_time_based_rolling_policy.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libsnmpagent_logger_a-time_and_size_based_rolling_policy.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblogger_a-logger.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblogger_a-logger_impl.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblogger_a-strict_time_based_rolling_policy.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/liblogger_a-time_and_size_based_rolling_policy.Po@am__quote@
.cpp.o:
@am__fastdepCXX_TRUE@ if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
-.cpp.lo:
-@am__fastdepCXX_TRUE@ if $(LTCXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+liblogger_a-logger.o: logger.cpp
+@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblogger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT liblogger_a-logger.o -MD -MP -MF "$(DEPDIR)/liblogger_a-logger.Tpo" -c -o liblogger_a-logger.o `test -f 'logger.cpp' || echo '$(srcdir)/'`logger.cpp; \
+@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/liblogger_a-logger.Tpo" "$(DEPDIR)/liblogger_a-logger.Po"; else rm -f "$(DEPDIR)/liblogger_a-logger.Tpo"; exit 1; fi
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='logger.cpp' object='liblogger_a-logger.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(LTCXXCOMPILE) -c -o $@ $<
+@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblogger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o liblogger_a-logger.o `test -f 'logger.cpp' || echo '$(srcdir)/'`logger.cpp
-libl7vsadm_logger_a-logger.o: logger.cpp
-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libl7vsadm_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libl7vsadm_logger_a-logger.o -MD -MP -MF "$(DEPDIR)/libl7vsadm_logger_a-logger.Tpo" -c -o libl7vsadm_logger_a-logger.o `test -f 'logger.cpp' || echo '$(srcdir)/'`logger.cpp; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/libl7vsadm_logger_a-logger.Tpo" "$(DEPDIR)/libl7vsadm_logger_a-logger.Po"; else rm -f "$(DEPDIR)/libl7vsadm_logger_a-logger.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='logger.cpp' object='libl7vsadm_logger_a-logger.o' libtool=no @AMDEPBACKSLASH@
+liblogger_a-logger.obj: logger.cpp
+@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblogger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT liblogger_a-logger.obj -MD -MP -MF "$(DEPDIR)/liblogger_a-logger.Tpo" -c -o liblogger_a-logger.obj `if test -f 'logger.cpp'; then $(CYGPATH_W) 'logger.cpp'; else $(CYGPATH_W) '$(srcdir)/logger.cpp'; fi`; \
+@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/liblogger_a-logger.Tpo" "$(DEPDIR)/liblogger_a-logger.Po"; else rm -f "$(DEPDIR)/liblogger_a-logger.Tpo"; exit 1; fi
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='logger.cpp' object='liblogger_a-logger.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libl7vsadm_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libl7vsadm_logger_a-logger.o `test -f 'logger.cpp' || echo '$(srcdir)/'`logger.cpp
+@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblogger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o liblogger_a-logger.obj `if test -f 'logger.cpp'; then $(CYGPATH_W) 'logger.cpp'; else $(CYGPATH_W) '$(srcdir)/logger.cpp'; fi`
-libl7vsadm_logger_a-logger.obj: logger.cpp
-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libl7vsadm_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libl7vsadm_logger_a-logger.obj -MD -MP -MF "$(DEPDIR)/libl7vsadm_logger_a-logger.Tpo" -c -o libl7vsadm_logger_a-logger.obj `if test -f 'logger.cpp'; then $(CYGPATH_W) 'logger.cpp'; else $(CYGPATH_W) '$(srcdir)/logger.cpp'; fi`; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/libl7vsadm_logger_a-logger.Tpo" "$(DEPDIR)/libl7vsadm_logger_a-logger.Po"; else rm -f "$(DEPDIR)/libl7vsadm_logger_a-logger.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='logger.cpp' object='libl7vsadm_logger_a-logger.obj' libtool=no @AMDEPBACKSLASH@
+liblogger_a-logger_impl.o: logger_impl.cpp
+@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblogger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT liblogger_a-logger_impl.o -MD -MP -MF "$(DEPDIR)/liblogger_a-logger_impl.Tpo" -c -o liblogger_a-logger_impl.o `test -f 'logger_impl.cpp' || echo '$(srcdir)/'`logger_impl.cpp; \
+@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/liblogger_a-logger_impl.Tpo" "$(DEPDIR)/liblogger_a-logger_impl.Po"; else rm -f "$(DEPDIR)/liblogger_a-logger_impl.Tpo"; exit 1; fi
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='logger_impl.cpp' object='liblogger_a-logger_impl.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libl7vsadm_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libl7vsadm_logger_a-logger.obj `if test -f 'logger.cpp'; then $(CYGPATH_W) 'logger.cpp'; else $(CYGPATH_W) '$(srcdir)/logger.cpp'; fi`
+@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblogger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o liblogger_a-logger_impl.o `test -f 'logger_impl.cpp' || echo '$(srcdir)/'`logger_impl.cpp
-libl7vsadm_logger_a-logger_impl.o: logger_impl.cpp
-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libl7vsadm_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libl7vsadm_logger_a-logger_impl.o -MD -MP -MF "$(DEPDIR)/libl7vsadm_logger_a-logger_impl.Tpo" -c -o libl7vsadm_logger_a-logger_impl.o `test -f 'logger_impl.cpp' || echo '$(srcdir)/'`logger_impl.cpp; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/libl7vsadm_logger_a-logger_impl.Tpo" "$(DEPDIR)/libl7vsadm_logger_a-logger_impl.Po"; else rm -f "$(DEPDIR)/libl7vsadm_logger_a-logger_impl.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='logger_impl.cpp' object='libl7vsadm_logger_a-logger_impl.o' libtool=no @AMDEPBACKSLASH@
+liblogger_a-logger_impl.obj: logger_impl.cpp
+@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblogger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT liblogger_a-logger_impl.obj -MD -MP -MF "$(DEPDIR)/liblogger_a-logger_impl.Tpo" -c -o liblogger_a-logger_impl.obj `if test -f 'logger_impl.cpp'; then $(CYGPATH_W) 'logger_impl.cpp'; else $(CYGPATH_W) '$(srcdir)/logger_impl.cpp'; fi`; \
+@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/liblogger_a-logger_impl.Tpo" "$(DEPDIR)/liblogger_a-logger_impl.Po"; else rm -f "$(DEPDIR)/liblogger_a-logger_impl.Tpo"; exit 1; fi
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='logger_impl.cpp' object='liblogger_a-logger_impl.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libl7vsadm_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libl7vsadm_logger_a-logger_impl.o `test -f 'logger_impl.cpp' || echo '$(srcdir)/'`logger_impl.cpp
+@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblogger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o liblogger_a-logger_impl.obj `if test -f 'logger_impl.cpp'; then $(CYGPATH_W) 'logger_impl.cpp'; else $(CYGPATH_W) '$(srcdir)/logger_impl.cpp'; fi`
-libl7vsadm_logger_a-logger_impl.obj: logger_impl.cpp
-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libl7vsadm_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libl7vsadm_logger_a-logger_impl.obj -MD -MP -MF "$(DEPDIR)/libl7vsadm_logger_a-logger_impl.Tpo" -c -o libl7vsadm_logger_a-logger_impl.obj `if test -f 'logger_impl.cpp'; then $(CYGPATH_W) 'logger_impl.cpp'; else $(CYGPATH_W) '$(srcdir)/logger_impl.cpp'; fi`; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/libl7vsadm_logger_a-logger_impl.Tpo" "$(DEPDIR)/libl7vsadm_logger_a-logger_impl.Po"; else rm -f "$(DEPDIR)/libl7vsadm_logger_a-logger_impl.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='logger_impl.cpp' object='libl7vsadm_logger_a-logger_impl.obj' libtool=no @AMDEPBACKSLASH@
+liblogger_a-strict_time_based_rolling_policy.o: strict_time_based_rolling_policy.cpp
+@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblogger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT liblogger_a-strict_time_based_rolling_policy.o -MD -MP -MF "$(DEPDIR)/liblogger_a-strict_time_based_rolling_policy.Tpo" -c -o liblogger_a-strict_time_based_rolling_policy.o `test -f 'strict_time_based_rolling_policy.cpp' || echo '$(srcdir)/'`strict_time_based_rolling_policy.cpp; \
+@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/liblogger_a-strict_time_based_rolling_policy.Tpo" "$(DEPDIR)/liblogger_a-strict_time_based_rolling_policy.Po"; else rm -f "$(DEPDIR)/liblogger_a-strict_time_based_rolling_policy.Tpo"; exit 1; fi
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='strict_time_based_rolling_policy.cpp' object='liblogger_a-strict_time_based_rolling_policy.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libl7vsadm_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libl7vsadm_logger_a-logger_impl.obj `if test -f 'logger_impl.cpp'; then $(CYGPATH_W) 'logger_impl.cpp'; else $(CYGPATH_W) '$(srcdir)/logger_impl.cpp'; fi`
+@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblogger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o liblogger_a-strict_time_based_rolling_policy.o `test -f 'strict_time_based_rolling_policy.cpp' || echo '$(srcdir)/'`strict_time_based_rolling_policy.cpp
-libl7vsadm_logger_a-strict_time_based_rolling_policy.o: strict_time_based_rolling_policy.cpp
-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libl7vsadm_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libl7vsadm_logger_a-strict_time_based_rolling_policy.o -MD -MP -MF "$(DEPDIR)/libl7vsadm_logger_a-strict_time_based_rolling_policy.Tpo" -c -o libl7vsadm_logger_a-strict_time_based_rolling_policy.o `test -f 'strict_time_based_rolling_policy.cpp' || echo '$(srcdir)/'`strict_time_based_rolling_policy.cpp; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/libl7vsadm_logger_a-strict_time_based_rolling_policy.Tpo" "$(DEPDIR)/libl7vsadm_logger_a-strict_time_based_rolling_policy.Po"; else rm -f "$(DEPDIR)/libl7vsadm_logger_a-strict_time_based_rolling_policy.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='strict_time_based_rolling_policy.cpp' object='libl7vsadm_logger_a-strict_time_based_rolling_policy.o' libtool=no @AMDEPBACKSLASH@
+liblogger_a-strict_time_based_rolling_policy.obj: strict_time_based_rolling_policy.cpp
+@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblogger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT liblogger_a-strict_time_based_rolling_policy.obj -MD -MP -MF "$(DEPDIR)/liblogger_a-strict_time_based_rolling_policy.Tpo" -c -o liblogger_a-strict_time_based_rolling_policy.obj `if test -f 'strict_time_based_rolling_policy.cpp'; then $(CYGPATH_W) 'strict_time_based_rolling_policy.cpp'; else $(CYGPATH_W) '$(srcdir)/strict_time_based_rolling_policy.cpp'; fi`; \
+@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/liblogger_a-strict_time_based_rolling_policy.Tpo" "$(DEPDIR)/liblogger_a-strict_time_based_rolling_policy.Po"; else rm -f "$(DEPDIR)/liblogger_a-strict_time_based_rolling_policy.Tpo"; exit 1; fi
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='strict_time_based_rolling_policy.cpp' object='liblogger_a-strict_time_based_rolling_policy.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libl7vsadm_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libl7vsadm_logger_a-strict_time_based_rolling_policy.o `test -f 'strict_time_based_rolling_policy.cpp' || echo '$(srcdir)/'`strict_time_based_rolling_policy.cpp
+@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblogger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o liblogger_a-strict_time_based_rolling_policy.obj `if test -f 'strict_time_based_rolling_policy.cpp'; then $(CYGPATH_W) 'strict_time_based_rolling_policy.cpp'; else $(CYGPATH_W) '$(srcdir)/strict_time_based_rolling_policy.cpp'; fi`
-libl7vsadm_logger_a-strict_time_based_rolling_policy.obj: strict_time_based_rolling_policy.cpp
-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libl7vsadm_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libl7vsadm_logger_a-strict_time_based_rolling_policy.obj -MD -MP -MF "$(DEPDIR)/libl7vsadm_logger_a-strict_time_based_rolling_policy.Tpo" -c -o libl7vsadm_logger_a-strict_time_based_rolling_policy.obj `if test -f 'strict_time_based_rolling_policy.cpp'; then $(CYGPATH_W) 'strict_time_based_rolling_policy.cpp'; else $(CYGPATH_W) '$(srcdir)/strict_time_based_rolling_policy.cpp'; fi`; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/libl7vsadm_logger_a-strict_time_based_rolling_policy.Tpo" "$(DEPDIR)/libl7vsadm_logger_a-strict_time_based_rolling_policy.Po"; else rm -f "$(DEPDIR)/libl7vsadm_logger_a-strict_time_based_rolling_policy.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='strict_time_based_rolling_policy.cpp' object='libl7vsadm_logger_a-strict_time_based_rolling_policy.obj' libtool=no @AMDEPBACKSLASH@
+liblogger_a-time_and_size_based_rolling_policy.o: time_and_size_based_rolling_policy.cpp
+@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblogger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT liblogger_a-time_and_size_based_rolling_policy.o -MD -MP -MF "$(DEPDIR)/liblogger_a-time_and_size_based_rolling_policy.Tpo" -c -o liblogger_a-time_and_size_based_rolling_policy.o `test -f 'time_and_size_based_rolling_policy.cpp' || echo '$(srcdir)/'`time_and_size_based_rolling_policy.cpp; \
+@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/liblogger_a-time_and_size_based_rolling_policy.Tpo" "$(DEPDIR)/liblogger_a-time_and_size_based_rolling_policy.Po"; else rm -f "$(DEPDIR)/liblogger_a-time_and_size_based_rolling_policy.Tpo"; exit 1; fi
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='time_and_size_based_rolling_policy.cpp' object='liblogger_a-time_and_size_based_rolling_policy.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libl7vsadm_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libl7vsadm_logger_a-strict_time_based_rolling_policy.obj `if test -f 'strict_time_based_rolling_policy.cpp'; then $(CYGPATH_W) 'strict_time_based_rolling_policy.cpp'; else $(CYGPATH_W) '$(srcdir)/strict_time_based_rolling_policy.cpp'; fi`
+@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblogger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o liblogger_a-time_and_size_based_rolling_policy.o `test -f 'time_and_size_based_rolling_policy.cpp' || echo '$(srcdir)/'`time_and_size_based_rolling_policy.cpp
-libl7vsadm_logger_a-time_and_size_based_rolling_policy.o: time_and_size_based_rolling_policy.cpp
-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libl7vsadm_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libl7vsadm_logger_a-time_and_size_based_rolling_policy.o -MD -MP -MF "$(DEPDIR)/libl7vsadm_logger_a-time_and_size_based_rolling_policy.Tpo" -c -o libl7vsadm_logger_a-time_and_size_based_rolling_policy.o `test -f 'time_and_size_based_rolling_policy.cpp' || echo '$(srcdir)/'`time_and_size_based_rolling_policy.cpp; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/libl7vsadm_logger_a-time_and_size_based_rolling_policy.Tpo" "$(DEPDIR)/libl7vsadm_logger_a-time_and_size_based_rolling_policy.Po"; else rm -f "$(DEPDIR)/libl7vsadm_logger_a-time_and_size_based_rolling_policy.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='time_and_size_based_rolling_policy.cpp' object='libl7vsadm_logger_a-time_and_size_based_rolling_policy.o' libtool=no @AMDEPBACKSLASH@
+liblogger_a-time_and_size_based_rolling_policy.obj: time_and_size_based_rolling_policy.cpp
+@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblogger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT liblogger_a-time_and_size_based_rolling_policy.obj -MD -MP -MF "$(DEPDIR)/liblogger_a-time_and_size_based_rolling_policy.Tpo" -c -o liblogger_a-time_and_size_based_rolling_policy.obj `if test -f 'time_and_size_based_rolling_policy.cpp'; then $(CYGPATH_W) 'time_and_size_based_rolling_policy.cpp'; else $(CYGPATH_W) '$(srcdir)/time_and_size_based_rolling_policy.cpp'; fi`; \
+@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/liblogger_a-time_and_size_based_rolling_policy.Tpo" "$(DEPDIR)/liblogger_a-time_and_size_based_rolling_policy.Po"; else rm -f "$(DEPDIR)/liblogger_a-time_and_size_based_rolling_policy.Tpo"; exit 1; fi
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='time_and_size_based_rolling_policy.cpp' object='liblogger_a-time_and_size_based_rolling_policy.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libl7vsadm_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libl7vsadm_logger_a-time_and_size_based_rolling_policy.o `test -f 'time_and_size_based_rolling_policy.cpp' || echo '$(srcdir)/'`time_and_size_based_rolling_policy.cpp
-
-libl7vsadm_logger_a-time_and_size_based_rolling_policy.obj: time_and_size_based_rolling_policy.cpp
-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libl7vsadm_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libl7vsadm_logger_a-time_and_size_based_rolling_policy.obj -MD -MP -MF "$(DEPDIR)/libl7vsadm_logger_a-time_and_size_based_rolling_policy.Tpo" -c -o libl7vsadm_logger_a-time_and_size_based_rolling_policy.obj `if test -f 'time_and_size_based_rolling_policy.cpp'; then $(CYGPATH_W) 'time_and_size_based_rolling_policy.cpp'; else $(CYGPATH_W) '$(srcdir)/time_and_size_based_rolling_policy.cpp'; fi`; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/libl7vsadm_logger_a-time_and_size_based_rolling_policy.Tpo" "$(DEPDIR)/libl7vsadm_logger_a-time_and_size_based_rolling_policy.Po"; else rm -f "$(DEPDIR)/libl7vsadm_logger_a-time_and_size_based_rolling_policy.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='time_and_size_based_rolling_policy.cpp' object='libl7vsadm_logger_a-time_and_size_based_rolling_policy.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libl7vsadm_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libl7vsadm_logger_a-time_and_size_based_rolling_policy.obj `if test -f 'time_and_size_based_rolling_policy.cpp'; then $(CYGPATH_W) 'time_and_size_based_rolling_policy.cpp'; else $(CYGPATH_W) '$(srcdir)/time_and_size_based_rolling_policy.cpp'; fi`
-
-libl7vsd_logger_a-logger.o: logger.cpp
-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libl7vsd_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libl7vsd_logger_a-logger.o -MD -MP -MF "$(DEPDIR)/libl7vsd_logger_a-logger.Tpo" -c -o libl7vsd_logger_a-logger.o `test -f 'logger.cpp' || echo '$(srcdir)/'`logger.cpp; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/libl7vsd_logger_a-logger.Tpo" "$(DEPDIR)/libl7vsd_logger_a-logger.Po"; else rm -f "$(DEPDIR)/libl7vsd_logger_a-logger.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='logger.cpp' object='libl7vsd_logger_a-logger.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libl7vsd_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libl7vsd_logger_a-logger.o `test -f 'logger.cpp' || echo '$(srcdir)/'`logger.cpp
-
-libl7vsd_logger_a-logger.obj: logger.cpp
-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libl7vsd_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libl7vsd_logger_a-logger.obj -MD -MP -MF "$(DEPDIR)/libl7vsd_logger_a-logger.Tpo" -c -o libl7vsd_logger_a-logger.obj `if test -f 'logger.cpp'; then $(CYGPATH_W) 'logger.cpp'; else $(CYGPATH_W) '$(srcdir)/logger.cpp'; fi`; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/libl7vsd_logger_a-logger.Tpo" "$(DEPDIR)/libl7vsd_logger_a-logger.Po"; else rm -f "$(DEPDIR)/libl7vsd_logger_a-logger.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='logger.cpp' object='libl7vsd_logger_a-logger.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libl7vsd_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libl7vsd_logger_a-logger.obj `if test -f 'logger.cpp'; then $(CYGPATH_W) 'logger.cpp'; else $(CYGPATH_W) '$(srcdir)/logger.cpp'; fi`
-
-libl7vsd_logger_a-logger_impl.o: logger_impl.cpp
-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libl7vsd_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libl7vsd_logger_a-logger_impl.o -MD -MP -MF "$(DEPDIR)/libl7vsd_logger_a-logger_impl.Tpo" -c -o libl7vsd_logger_a-logger_impl.o `test -f 'logger_impl.cpp' || echo '$(srcdir)/'`logger_impl.cpp; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/libl7vsd_logger_a-logger_impl.Tpo" "$(DEPDIR)/libl7vsd_logger_a-logger_impl.Po"; else rm -f "$(DEPDIR)/libl7vsd_logger_a-logger_impl.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='logger_impl.cpp' object='libl7vsd_logger_a-logger_impl.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libl7vsd_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libl7vsd_logger_a-logger_impl.o `test -f 'logger_impl.cpp' || echo '$(srcdir)/'`logger_impl.cpp
-
-libl7vsd_logger_a-logger_impl.obj: logger_impl.cpp
-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libl7vsd_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libl7vsd_logger_a-logger_impl.obj -MD -MP -MF "$(DEPDIR)/libl7vsd_logger_a-logger_impl.Tpo" -c -o libl7vsd_logger_a-logger_impl.obj `if test -f 'logger_impl.cpp'; then $(CYGPATH_W) 'logger_impl.cpp'; else $(CYGPATH_W) '$(srcdir)/logger_impl.cpp'; fi`; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/libl7vsd_logger_a-logger_impl.Tpo" "$(DEPDIR)/libl7vsd_logger_a-logger_impl.Po"; else rm -f "$(DEPDIR)/libl7vsd_logger_a-logger_impl.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='logger_impl.cpp' object='libl7vsd_logger_a-logger_impl.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libl7vsd_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libl7vsd_logger_a-logger_impl.obj `if test -f 'logger_impl.cpp'; then $(CYGPATH_W) 'logger_impl.cpp'; else $(CYGPATH_W) '$(srcdir)/logger_impl.cpp'; fi`
-
-libl7vsd_logger_a-strict_time_based_rolling_policy.o: strict_time_based_rolling_policy.cpp
-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libl7vsd_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libl7vsd_logger_a-strict_time_based_rolling_policy.o -MD -MP -MF "$(DEPDIR)/libl7vsd_logger_a-strict_time_based_rolling_policy.Tpo" -c -o libl7vsd_logger_a-strict_time_based_rolling_policy.o `test -f 'strict_time_based_rolling_policy.cpp' || echo '$(srcdir)/'`strict_time_based_rolling_policy.cpp; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/libl7vsd_logger_a-strict_time_based_rolling_policy.Tpo" "$(DEPDIR)/libl7vsd_logger_a-strict_time_based_rolling_policy.Po"; else rm -f "$(DEPDIR)/libl7vsd_logger_a-strict_time_based_rolling_policy.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='strict_time_based_rolling_policy.cpp' object='libl7vsd_logger_a-strict_time_based_rolling_policy.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libl7vsd_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libl7vsd_logger_a-strict_time_based_rolling_policy.o `test -f 'strict_time_based_rolling_policy.cpp' || echo '$(srcdir)/'`strict_time_based_rolling_policy.cpp
-
-libl7vsd_logger_a-strict_time_based_rolling_policy.obj: strict_time_based_rolling_policy.cpp
-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libl7vsd_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libl7vsd_logger_a-strict_time_based_rolling_policy.obj -MD -MP -MF "$(DEPDIR)/libl7vsd_logger_a-strict_time_based_rolling_policy.Tpo" -c -o libl7vsd_logger_a-strict_time_based_rolling_policy.obj `if test -f 'strict_time_based_rolling_policy.cpp'; then $(CYGPATH_W) 'strict_time_based_rolling_policy.cpp'; else $(CYGPATH_W) '$(srcdir)/strict_time_based_rolling_policy.cpp'; fi`; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/libl7vsd_logger_a-strict_time_based_rolling_policy.Tpo" "$(DEPDIR)/libl7vsd_logger_a-strict_time_based_rolling_policy.Po"; else rm -f "$(DEPDIR)/libl7vsd_logger_a-strict_time_based_rolling_policy.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='strict_time_based_rolling_policy.cpp' object='libl7vsd_logger_a-strict_time_based_rolling_policy.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libl7vsd_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libl7vsd_logger_a-strict_time_based_rolling_policy.obj `if test -f 'strict_time_based_rolling_policy.cpp'; then $(CYGPATH_W) 'strict_time_based_rolling_policy.cpp'; else $(CYGPATH_W) '$(srcdir)/strict_time_based_rolling_policy.cpp'; fi`
-
-libl7vsd_logger_a-time_and_size_based_rolling_policy.o: time_and_size_based_rolling_policy.cpp
-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libl7vsd_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libl7vsd_logger_a-time_and_size_based_rolling_policy.o -MD -MP -MF "$(DEPDIR)/libl7vsd_logger_a-time_and_size_based_rolling_policy.Tpo" -c -o libl7vsd_logger_a-time_and_size_based_rolling_policy.o `test -f 'time_and_size_based_rolling_policy.cpp' || echo '$(srcdir)/'`time_and_size_based_rolling_policy.cpp; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/libl7vsd_logger_a-time_and_size_based_rolling_policy.Tpo" "$(DEPDIR)/libl7vsd_logger_a-time_and_size_based_rolling_policy.Po"; else rm -f "$(DEPDIR)/libl7vsd_logger_a-time_and_size_based_rolling_policy.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='time_and_size_based_rolling_policy.cpp' object='libl7vsd_logger_a-time_and_size_based_rolling_policy.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libl7vsd_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libl7vsd_logger_a-time_and_size_based_rolling_policy.o `test -f 'time_and_size_based_rolling_policy.cpp' || echo '$(srcdir)/'`time_and_size_based_rolling_policy.cpp
-
-libl7vsd_logger_a-time_and_size_based_rolling_policy.obj: time_and_size_based_rolling_policy.cpp
-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libl7vsd_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libl7vsd_logger_a-time_and_size_based_rolling_policy.obj -MD -MP -MF "$(DEPDIR)/libl7vsd_logger_a-time_and_size_based_rolling_policy.Tpo" -c -o libl7vsd_logger_a-time_and_size_based_rolling_policy.obj `if test -f 'time_and_size_based_rolling_policy.cpp'; then $(CYGPATH_W) 'time_and_size_based_rolling_policy.cpp'; else $(CYGPATH_W) '$(srcdir)/time_and_size_based_rolling_policy.cpp'; fi`; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/libl7vsd_logger_a-time_and_size_based_rolling_policy.Tpo" "$(DEPDIR)/libl7vsd_logger_a-time_and_size_based_rolling_policy.Po"; else rm -f "$(DEPDIR)/libl7vsd_logger_a-time_and_size_based_rolling_policy.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='time_and_size_based_rolling_policy.cpp' object='libl7vsd_logger_a-time_and_size_based_rolling_policy.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libl7vsd_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libl7vsd_logger_a-time_and_size_based_rolling_policy.obj `if test -f 'time_and_size_based_rolling_policy.cpp'; then $(CYGPATH_W) 'time_and_size_based_rolling_policy.cpp'; else $(CYGPATH_W) '$(srcdir)/time_and_size_based_rolling_policy.cpp'; fi`
-
-libsnmpagent_logger_a-logger.o: logger.cpp
-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsnmpagent_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libsnmpagent_logger_a-logger.o -MD -MP -MF "$(DEPDIR)/libsnmpagent_logger_a-logger.Tpo" -c -o libsnmpagent_logger_a-logger.o `test -f 'logger.cpp' || echo '$(srcdir)/'`logger.cpp; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/libsnmpagent_logger_a-logger.Tpo" "$(DEPDIR)/libsnmpagent_logger_a-logger.Po"; else rm -f "$(DEPDIR)/libsnmpagent_logger_a-logger.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='logger.cpp' object='libsnmpagent_logger_a-logger.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsnmpagent_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libsnmpagent_logger_a-logger.o `test -f 'logger.cpp' || echo '$(srcdir)/'`logger.cpp
-
-libsnmpagent_logger_a-logger.obj: logger.cpp
-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsnmpagent_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libsnmpagent_logger_a-logger.obj -MD -MP -MF "$(DEPDIR)/libsnmpagent_logger_a-logger.Tpo" -c -o libsnmpagent_logger_a-logger.obj `if test -f 'logger.cpp'; then $(CYGPATH_W) 'logger.cpp'; else $(CYGPATH_W) '$(srcdir)/logger.cpp'; fi`; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/libsnmpagent_logger_a-logger.Tpo" "$(DEPDIR)/libsnmpagent_logger_a-logger.Po"; else rm -f "$(DEPDIR)/libsnmpagent_logger_a-logger.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='logger.cpp' object='libsnmpagent_logger_a-logger.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsnmpagent_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libsnmpagent_logger_a-logger.obj `if test -f 'logger.cpp'; then $(CYGPATH_W) 'logger.cpp'; else $(CYGPATH_W) '$(srcdir)/logger.cpp'; fi`
-
-libsnmpagent_logger_a-logger_impl.o: logger_impl.cpp
-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsnmpagent_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libsnmpagent_logger_a-logger_impl.o -MD -MP -MF "$(DEPDIR)/libsnmpagent_logger_a-logger_impl.Tpo" -c -o libsnmpagent_logger_a-logger_impl.o `test -f 'logger_impl.cpp' || echo '$(srcdir)/'`logger_impl.cpp; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/libsnmpagent_logger_a-logger_impl.Tpo" "$(DEPDIR)/libsnmpagent_logger_a-logger_impl.Po"; else rm -f "$(DEPDIR)/libsnmpagent_logger_a-logger_impl.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='logger_impl.cpp' object='libsnmpagent_logger_a-logger_impl.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsnmpagent_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libsnmpagent_logger_a-logger_impl.o `test -f 'logger_impl.cpp' || echo '$(srcdir)/'`logger_impl.cpp
-
-libsnmpagent_logger_a-logger_impl.obj: logger_impl.cpp
-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsnmpagent_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libsnmpagent_logger_a-logger_impl.obj -MD -MP -MF "$(DEPDIR)/libsnmpagent_logger_a-logger_impl.Tpo" -c -o libsnmpagent_logger_a-logger_impl.obj `if test -f 'logger_impl.cpp'; then $(CYGPATH_W) 'logger_impl.cpp'; else $(CYGPATH_W) '$(srcdir)/logger_impl.cpp'; fi`; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/libsnmpagent_logger_a-logger_impl.Tpo" "$(DEPDIR)/libsnmpagent_logger_a-logger_impl.Po"; else rm -f "$(DEPDIR)/libsnmpagent_logger_a-logger_impl.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='logger_impl.cpp' object='libsnmpagent_logger_a-logger_impl.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsnmpagent_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libsnmpagent_logger_a-logger_impl.obj `if test -f 'logger_impl.cpp'; then $(CYGPATH_W) 'logger_impl.cpp'; else $(CYGPATH_W) '$(srcdir)/logger_impl.cpp'; fi`
-
-libsnmpagent_logger_a-strict_time_based_rolling_policy.o: strict_time_based_rolling_policy.cpp
-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsnmpagent_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libsnmpagent_logger_a-strict_time_based_rolling_policy.o -MD -MP -MF "$(DEPDIR)/libsnmpagent_logger_a-strict_time_based_rolling_policy.Tpo" -c -o libsnmpagent_logger_a-strict_time_based_rolling_policy.o `test -f 'strict_time_based_rolling_policy.cpp' || echo '$(srcdir)/'`strict_time_based_rolling_policy.cpp; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/libsnmpagent_logger_a-strict_time_based_rolling_policy.Tpo" "$(DEPDIR)/libsnmpagent_logger_a-strict_time_based_rolling_policy.Po"; else rm -f "$(DEPDIR)/libsnmpagent_logger_a-strict_time_based_rolling_policy.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='strict_time_based_rolling_policy.cpp' object='libsnmpagent_logger_a-strict_time_based_rolling_policy.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsnmpagent_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libsnmpagent_logger_a-strict_time_based_rolling_policy.o `test -f 'strict_time_based_rolling_policy.cpp' || echo '$(srcdir)/'`strict_time_based_rolling_policy.cpp
-
-libsnmpagent_logger_a-strict_time_based_rolling_policy.obj: strict_time_based_rolling_policy.cpp
-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsnmpagent_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libsnmpagent_logger_a-strict_time_based_rolling_policy.obj -MD -MP -MF "$(DEPDIR)/libsnmpagent_logger_a-strict_time_based_rolling_policy.Tpo" -c -o libsnmpagent_logger_a-strict_time_based_rolling_policy.obj `if test -f 'strict_time_based_rolling_policy.cpp'; then $(CYGPATH_W) 'strict_time_based_rolling_policy.cpp'; else $(CYGPATH_W) '$(srcdir)/strict_time_based_rolling_policy.cpp'; fi`; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/libsnmpagent_logger_a-strict_time_based_rolling_policy.Tpo" "$(DEPDIR)/libsnmpagent_logger_a-strict_time_based_rolling_policy.Po"; else rm -f "$(DEPDIR)/libsnmpagent_logger_a-strict_time_based_rolling_policy.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='strict_time_based_rolling_policy.cpp' object='libsnmpagent_logger_a-strict_time_based_rolling_policy.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsnmpagent_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libsnmpagent_logger_a-strict_time_based_rolling_policy.obj `if test -f 'strict_time_based_rolling_policy.cpp'; then $(CYGPATH_W) 'strict_time_based_rolling_policy.cpp'; else $(CYGPATH_W) '$(srcdir)/strict_time_based_rolling_policy.cpp'; fi`
-
-libsnmpagent_logger_a-time_and_size_based_rolling_policy.o: time_and_size_based_rolling_policy.cpp
-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsnmpagent_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libsnmpagent_logger_a-time_and_size_based_rolling_policy.o -MD -MP -MF "$(DEPDIR)/libsnmpagent_logger_a-time_and_size_based_rolling_policy.Tpo" -c -o libsnmpagent_logger_a-time_and_size_based_rolling_policy.o `test -f 'time_and_size_based_rolling_policy.cpp' || echo '$(srcdir)/'`time_and_size_based_rolling_policy.cpp; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/libsnmpagent_logger_a-time_and_size_based_rolling_policy.Tpo" "$(DEPDIR)/libsnmpagent_logger_a-time_and_size_based_rolling_policy.Po"; else rm -f "$(DEPDIR)/libsnmpagent_logger_a-time_and_size_based_rolling_policy.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='time_and_size_based_rolling_policy.cpp' object='libsnmpagent_logger_a-time_and_size_based_rolling_policy.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsnmpagent_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libsnmpagent_logger_a-time_and_size_based_rolling_policy.o `test -f 'time_and_size_based_rolling_policy.cpp' || echo '$(srcdir)/'`time_and_size_based_rolling_policy.cpp
-
-libsnmpagent_logger_a-time_and_size_based_rolling_policy.obj: time_and_size_based_rolling_policy.cpp
-@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsnmpagent_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libsnmpagent_logger_a-time_and_size_based_rolling_policy.obj -MD -MP -MF "$(DEPDIR)/libsnmpagent_logger_a-time_and_size_based_rolling_policy.Tpo" -c -o libsnmpagent_logger_a-time_and_size_based_rolling_policy.obj `if test -f 'time_and_size_based_rolling_policy.cpp'; then $(CYGPATH_W) 'time_and_size_based_rolling_policy.cpp'; else $(CYGPATH_W) '$(srcdir)/time_and_size_based_rolling_policy.cpp'; fi`; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/libsnmpagent_logger_a-time_and_size_based_rolling_policy.Tpo" "$(DEPDIR)/libsnmpagent_logger_a-time_and_size_based_rolling_policy.Po"; else rm -f "$(DEPDIR)/libsnmpagent_logger_a-time_and_size_based_rolling_policy.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='time_and_size_based_rolling_policy.cpp' object='libsnmpagent_logger_a-time_and_size_based_rolling_policy.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsnmpagent_logger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libsnmpagent_logger_a-time_and_size_based_rolling_policy.obj `if test -f 'time_and_size_based_rolling_policy.cpp'; then $(CYGPATH_W) 'time_and_size_based_rolling_policy.cpp'; else $(CYGPATH_W) '$(srcdir)/time_and_size_based_rolling_policy.cpp'; fi`
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-
-distclean-libtool:
- -rm -f libtool
+@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(liblogger_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o liblogger_a-time_and_size_based_rolling_policy.obj `if test -f 'time_and_size_based_rolling_policy.cpp'; then $(CYGPATH_W) 'time_and_size_based_rolling_policy.cpp'; else $(CYGPATH_W) '$(srcdir)/time_and_size_based_rolling_policy.cpp'; fi`
uninstall-info-am:
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
@echo "it deletes files that may require special tools to rebuild."
clean: clean-am
-clean-am: clean-generic clean-libtool clean-noinstLIBRARIES \
- mostlyclean-am
+clean-am: clean-generic clean-noinstLIBRARIES mostlyclean-am
distclean: distclean-am
-rm -rf ./$(DEPDIR)
-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
- distclean-libtool distclean-tags
+ distclean-tags
dvi: dvi-am
mostlyclean: mostlyclean-am
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
- mostlyclean-libtool
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
pdf: pdf-am
uninstall-am: uninstall-info-am
.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
- clean-libtool clean-noinstLIBRARIES ctags distclean \
- distclean-compile distclean-generic distclean-libtool \
- distclean-tags distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-exec \
- install-exec-am install-info install-info-am install-man \
- install-strip installcheck installcheck-am installdirs \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
- pdf pdf-am ps ps-am tags uninstall uninstall-am \
- uninstall-info-am
+ clean-noinstLIBRARIES ctags distclean distclean-compile \
+ distclean-generic distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-compile \
+ mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \
+ uninstall-am uninstall-info-am
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
-/*
- * @file logger.cpp
- * @brief logger module creation class.
- *
- * L7VSD: Linux Virtual Server for Layer7 Load Balancing
- * Copyright (C) 2008 NTT COMWARE Corporation.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation; either
- * version 2.1 of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this library; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- **********************************************************************/
-
-#include <logger.h>
-#include <logger_impl.h>
-
-/*!
- * default constructor.
- * get instance of implement class, and initialize
- * @param void
- * @return void
- */
-l7vs::Logger::Logger()
-{
- if (!LoggerImpl::getInstance().init()) {
- exit(1);
- }
-}
-
-/*!
- * destructor.
- * @param void
- * @return void
- */
-l7vs::Logger::~Logger()
-{
-}
-
-/*!
- * retrieve category's log level.
- * this is only wrapper to implement method.
- * @param category that want to know
- * @return log level
- */
-LOG_LEVEL_TAG l7vs::Logger::getLogLevel(LOG_CATEGORY_TAG cat)
-{
- return LoggerImpl::getInstance().getLogLevel(cat);
-}
-
-/*!
- * set category's log level.
- * this is only wrapper to implement method.
- * @param category to set log level
- * @param level
- * @retval true succeed
- * @retval false failed
- */
-bool l7vs::Logger::setLogLevel(LOG_CATEGORY_TAG cat, LOG_LEVEL_TAG level)
-{
- return LoggerImpl::getInstance().setLogLevel(cat, level);
-}
-
-/*!
- * output fatal log.
- * this is only wrapper to implement method.
- * @param category that logging matter occured
- * @param log message id
- * @param log message
- * @param current file
- * @param current line
- * @retrun void
- */
-void l7vs::Logger::putLogFatal(LOG_CATEGORY_TAG cat, const unsigned int message_id, const std::string& message, const char *file, int line)
-{
- LoggerImpl::getInstance().putLogFatal(cat, message_id, message, file, line);
-}
-
-/*!
- * output errorl log.
- * this is only wrapper to implement method.
- * @param category that logging matter occured
- * @param log message id
- * @param log message
- * @param current file
- * @param current line
- * @retrun void
- */
-void l7vs::Logger::putLogError(LOG_CATEGORY_TAG cat, const unsigned int message_id, const std::string& message, const char *file, int line)
-{
- LoggerImpl::getInstance().putLogError(cat, message_id, message, file, line);
-}
-
-/*!
- * output warn log.
- * this is only wrapper to implement method.
- * @param category that logging matter occured
- * @param log message id
- * @param log message
- * @param current file
- * @param current line
- * @retrun void
- */
-void l7vs::Logger::putLogWarn(LOG_CATEGORY_TAG cat, const unsigned int message_id, const std::string& message, const char *file, int line)
-{
- LoggerImpl::getInstance().putLogWarn(cat, message_id, message, file, line);
-}
-
-/*!
- * output info log.
- * this is only wrapper to implement method.
- * @param category that logging matter occured
- * @param log message id
- * @param log message
- * @param current file
- * @param current line
- * @retrun void
- */
-void l7vs::Logger::putLogInfo(LOG_CATEGORY_TAG cat, const unsigned int message_id, const std::string& message, const char *file, int line)
-{
- LoggerImpl::getInstance().putLogInfo(cat, message_id, message, file, line);
-}
-
-/*!
- * output debug log.
- * this is only wrapper to implement method.
- * @param category that logging matter occured
- * @param log message id
- * @param log message
- * @param current file
- * @param current line
- * @retrun void
- */
-void l7vs::Logger::putLogDebug(LOG_CATEGORY_TAG cat, const unsigned int message_id, const std::string& message, const char *file, int line)
-{
- LoggerImpl::getInstance().putLogDebug(cat, message_id, message, file, line);
-}
-
-/*!
- * return start category by using module.
- * this is only wrapper to implement method.
- * @param module
- * @retrun start category
- */
-LOG_CATEGORY_TAG l7vs::Logger::getCategoryRangeStart(LOG_MODULE_TAG mod)
-{
- return LoggerImpl::getInstance().getCategoryRangeStart(mod);
-}
-
-/*!
- * return end category by using module.
- * this is only wrapper to implement method.
- * @param module
- * @retrun end category
- */
-LOG_CATEGORY_TAG l7vs::Logger::getCategoryRangeEnd(LOG_MODULE_TAG mod)
-{
- return LoggerImpl::getInstance().getCategoryRangeEnd(mod);
-}
-
-/*!
- * reload configuration.
- * this is only wrapper to implement method.
- * @param void
- * @return void
- */
-void l7vs::Logger::loadConf()
-{
- LoggerImpl::getInstance().loadConf();
-}
+/*\r
+ * @file logger.cpp\r
+ * @brief logger module creation class.\r
+ *\r
+ * L7VSD: Linux Virtual Server for Layer7 Load Balancing\r
+ * Copyright (C) 2008 NTT COMWARE Corporation.\r
+ *\r
+ * This program is free software; you can redistribute it and/or\r
+ * modify it under the terms of the GNU Lesser General Public\r
+ * License as published by the Free Software Foundation; either\r
+ * version 2.1 of the License, or (at your option) any later version.\r
+ *\r
+ * This program is distributed in the hope that it will be useful,\r
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of\r
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU\r
+ * Lesser General Public License for more details.\r
+ *\r
+ * You should have received a copy of the GNU Lesser General Public\r
+ * License along with this library; if not, write to the Free Software\r
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA\r
+ * 02110-1301 USA\r
+ *\r
+ **********************************************************************/\r
+\r
+#include <logger.h>\r
+#include <logger_impl.h>\r
+\r
+/*!\r
+ * default constructor.\r
+ * get instance of implement class, and initialize\r
+ * @param void\r
+ * @return void\r
+ */\r
+l7vs::Logger::Logger()\r
+{\r
+ if (!LoggerImpl::getInstance().init()) {\r
+ exit(1);\r
+ }\r
+}\r
+\r
+/*!\r
+ * destructor.\r
+ * @param void\r
+ * @return void\r
+ */\r
+l7vs::Logger::~Logger()\r
+{\r
+}\r
+\r
+/*!\r
+ * retrieve category's log level.\r
+ * this is only wrapper to implement method.\r
+ * @param category that want to know\r
+ * @return log level\r
+ */\r
+l7vs::LOG_LEVEL_TAG l7vs::Logger::getLogLevel(LOG_CATEGORY_TAG cat)\r
+{\r
+ return LoggerImpl::getInstance().getLogLevel(cat);\r
+}\r
+\r
+/*!\r
+ * set category's log level.\r
+ * this is only wrapper to implement method.\r
+ * @param category to set log level\r
+ * @param level\r
+ * @retval true succeed\r
+ * @retval false failed\r
+ */\r
+bool l7vs::Logger::setLogLevel(LOG_CATEGORY_TAG cat, LOG_LEVEL_TAG level)\r
+{\r
+ return LoggerImpl::getInstance().setLogLevel(cat, level);\r
+}\r
+\r
+/*!\r
+ * output fatal log.\r
+ * this is only wrapper to implement method.\r
+ * @param category that logging matter occured\r
+ * @param log message id \r
+ * @param log message \r
+ * @param current file \r
+ * @param current line\r
+ * @retrun void\r
+ */\r
+void l7vs::Logger::putLogFatal(LOG_CATEGORY_TAG cat, const unsigned int message_id, const std::string& message, const char *file, int line)\r
+{\r
+ LoggerImpl::getInstance().putLogFatal(cat, message_id, message, file, line);\r
+}\r
+\r
+/*!\r
+ * output errorl log.\r
+ * this is only wrapper to implement method.\r
+ * @param category that logging matter occured\r
+ * @param log message id \r
+ * @param log message \r
+ * @param current file \r
+ * @param current line\r
+ * @retrun void\r
+ */\r
+void l7vs::Logger::putLogError(LOG_CATEGORY_TAG cat, const unsigned int message_id, const std::string& message, const char *file, int line)\r
+{\r
+ LoggerImpl::getInstance().putLogError(cat, message_id, message, file, line);\r
+}\r
+\r
+/*!\r
+ * output warn log.\r
+ * this is only wrapper to implement method.\r
+ * @param category that logging matter occured\r
+ * @param log message id \r
+ * @param log message \r
+ * @param current file \r
+ * @param current line\r
+ * @retrun void\r
+ */\r
+void l7vs::Logger::putLogWarn(LOG_CATEGORY_TAG cat, const unsigned int message_id, const std::string& message, const char *file, int line)\r
+{\r
+ LoggerImpl::getInstance().putLogWarn(cat, message_id, message, file, line);\r
+}\r
+\r
+/*!\r
+ * output info log.\r
+ * this is only wrapper to implement method.\r
+ * @param category that logging matter occured\r
+ * @param log message id \r
+ * @param log message \r
+ * @param current file \r
+ * @param current line\r
+ * @retrun void\r
+ */\r
+void l7vs::Logger::putLogInfo(LOG_CATEGORY_TAG cat, const unsigned int message_id, const std::string& message, const char *file, int line)\r
+{\r
+ LoggerImpl::getInstance().putLogInfo(cat, message_id, message, file, line);\r
+}\r
+\r
+/*!\r
+ * output debug log.\r
+ * this is only wrapper to implement method.\r
+ * @param category that logging matter occured\r
+ * @param log message id \r
+ * @param log message \r
+ * @param current file \r
+ * @param current line\r
+ * @retrun void\r
+ */\r
+void l7vs::Logger::putLogDebug(LOG_CATEGORY_TAG cat, const unsigned int message_id, const std::string& message, const char *file, int line)\r
+{\r
+ LoggerImpl::getInstance().putLogDebug(cat, message_id, message, file, line);\r
+}\r
+\r
+/*!\r
+ * reload configuration.\r
+ * this is only wrapper to implement method.\r
+ * @param void\r
+ * @return void\r
+ */\r
+void l7vs::Logger::loadConf()\r
+{\r
+ LoggerImpl::getInstance().loadConf();\r
+}\r
-/*
- * @file logger.h
- * @brief logger module creation class.
- *
- * L7VSD: Linux Virtual Server for Layer7 Load Balancing
- * Copyright (C) 2008 NTT COMWARE Corporation.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation; either
- * version 2.1 of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this library; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- **********************************************************************/
-
-#ifndef __LOGGER_H__
-#define __LOGGER_H__
-
-#include <string>
-#include <logger_enum.h>
-
-#define BUF_LEN (4096)
-#define DEBUG_STR_LEN (4096)
-
-namespace l7vs
-{
- /*!
- * Logger creation class.
- * this class create Logger Inmlement class and mediate function.
- */
- class Logger
- {
- public:
- //! default constructor creates implement class.
- Logger();
- //! destructor.
- ~Logger();
- /*!
- * returns single instance.
- *
- * @param void
- * @return instance
- */
- static Logger& getInstance() {
- return instance;
- }
- //! load Configuration.
- void loadConf();
- //! retrieve category's log level.
- LOG_LEVEL_TAG getLogLevel(LOG_CATEGORY_TAG cat);
- //! set category's log level.
- bool setLogLevel(LOG_CATEGORY_TAG cat, LOG_LEVEL_TAG level);
- //! output fatal log.
- void putLogFatal(LOG_CATEGORY_TAG cat, const unsigned int message_id, const std::string& message, const char *file, int line);
- //! output error log.
- void putLogError(LOG_CATEGORY_TAG cat, const unsigned int message_id, const std::string& message, const char *file, int line);
- //! output warn log.
- void putLogWarn(LOG_CATEGORY_TAG cat, const unsigned int message_id, const std::string& message, const char *file, int line);
- //! output info log.
- void putLogInfo(LOG_CATEGORY_TAG cat, const unsigned int message_id, const std::string& message, const char *file, int line);
- //! output debug log.
- void putLogDebug(LOG_CATEGORY_TAG cat, const unsigned int message_id, const std::string& message, const char *file, int line);
- //! return start category by using module.
- LOG_CATEGORY_TAG getCategoryRangeStart(LOG_MODULE_TAG mod);
- //! return end category by using module.
- LOG_CATEGORY_TAG getCategoryRangeEnd(LOG_MODULE_TAG mod);
-
- protected:
- /*!
- * static instance initialize before main.
- * instance will defined in main program.
- */
- static Logger instance;
- };
-} //namespace l7vs
-
-#endif //__LOGGER_H__
+/*\r
+ * @file logger.h\r
+ * @brief logger module creation class.\r
+ *\r
+ * L7VSD: Linux Virtual Server for Layer7 Load Balancing\r
+ * Copyright (C) 2008 NTT COMWARE Corporation.\r
+ *\r
+ * This program is free software; you can redistribute it and/or\r
+ * modify it under the terms of the GNU Lesser General Public\r
+ * License as published by the Free Software Foundation; either\r
+ * version 2.1 of the License, or (at your option) any later version.\r
+ *\r
+ * This program is distributed in the hope that it will be useful,\r
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of\r
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU\r
+ * Lesser General Public License for more details.\r
+ * \r
+ * You should have received a copy of the GNU Lesser General Public\r
+ * License along with this library; if not, write to the Free Software\r
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA\r
+ * 02110-1301 USA\r
+ *\r
+ **********************************************************************/\r
+\r
+#ifndef __LOGGER_H__\r
+#define __LOGGER_H__\r
+\r
+#include <string>\r
+#include <logger_enum.h>\r
+\r
+#define BUF_LEN (4096)\r
+#define DEBUG_STR_LEN (4096)\r
+\r
+namespace l7vs\r
+{\r
+ /*!\r
+ * Logger creation class.\r
+ * this class create Logger Inmlement class and mediate function.\r
+ */\r
+ class Logger\r
+ {\r
+ public:\r
+ //! default constructor creates implement class.\r
+ Logger();\r
+ //! destructor.\r
+ ~Logger();\r
+ /*!\r
+ * returns single instance.\r
+ *\r
+ * @param void\r
+ * @return instance\r
+ */ \r
+ static Logger& getInstance() {\r
+ return instance;\r
+ }\r
+ //! load Configuration.\r
+ void loadConf();\r
+ //! retrieve category's log level.\r
+ LOG_LEVEL_TAG getLogLevel(LOG_CATEGORY_TAG cat);\r
+ //! set category's log level.\r
+ bool setLogLevel(LOG_CATEGORY_TAG cat, LOG_LEVEL_TAG level);\r
+ //! output fatal log.\r
+ void putLogFatal(LOG_CATEGORY_TAG cat, const unsigned int message_id, const std::string& message, const char *file, int line);\r
+ //! output error log.\r
+ void putLogError(LOG_CATEGORY_TAG cat, const unsigned int message_id, const std::string& message, const char *file, int line);\r
+ //! output warn log.\r
+ void putLogWarn(LOG_CATEGORY_TAG cat, const unsigned int message_id, const std::string& message, const char *file, int line);\r
+ //! output info log.\r
+ void putLogInfo(LOG_CATEGORY_TAG cat, const unsigned int message_id, const std::string& message, const char *file, int line);\r
+ //! output debug log.\r
+ void putLogDebug(LOG_CATEGORY_TAG cat, const unsigned int message_id, const std::string& message, const char *file, int line);\r
+\r
+ protected:\r
+ /*!\r
+ * static instance initialize before main. \r
+ * instance will defined in main program.\r
+ */\r
+ static Logger instance;\r
+ };\r
+} //namespace l7vs\r
+\r
+#endif //__LOGGER_H__\r
-/*
- * @file logger_enum.h
- * @brief logger module constants enumeration.
- *
- * L7VSD: Linux Virtual Server for Layer7 Load Balancing
- * Copyright (C) 2008 NTT COMWARE Corporation.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation; either
- * version 2.1 of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this library; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- **********************************************************************/
-
-#ifndef __LOGGER_ENUM_H__
-#define __LOGGER_ENUM_H__
-
-#include <string>
-#include <log4cxx/level.h>
-
-/*!
- * LogLevel enumeration.
- */
-enum LOG_LEVEL_TAG
-{
- LOG_LV_NONE = 0,
- LOG_LV_DEBUG,
- LOG_LV_INFO,
- LOG_LV_WARN,
- LOG_LV_ERROR,
- LOG_LV_FATAL
-};
-
-inline LOG_LEVEL_TAG& operator++(LOG_LEVEL_TAG& level) {
- level = static_cast<LOG_LEVEL_TAG>(level + 1);
- return level;
-}
-
-/*!
- * Category enumeration.
- */
-enum LOG_CATEGORY_TAG
-{
- LOG_CAT_NONE = 0,
- LOG_CAT_L7VSD_NETWORK,
- LOG_CAT_L7VSD_NETWORK_BANDWIDTH,
- LOG_CAT_L7VSD_NETWORK_NUM_CONNECTION,
- LOG_CAT_L7VSD_NETWORK_QOS,
- LOG_CAT_L7VSD_VIRTUAL_SERVICE,
- LOG_CAT_L7VSD_REAL_SERVER,
- LOG_CAT_L7VSD_SORRY_SERVER,
- LOG_CAT_L7VSD_REAL_SERVER_BALANCING,
- LOG_CAT_L7VSD_REPLICATION,
- LOG_CAT_L7VSD_START_STOP,
- LOG_CAT_L7VSD_SYSTEM,
- LOG_CAT_L7VSD_SYSTEM_MEMORY,
- LOG_CAT_L7VSD_SYSTEM_SOCKET,
- LOG_CAT_L7VSD_SYSTEM_SIGNAL,
- LOG_CAT_L7VSD_ENVIRONMENT,
- LOG_CAT_L7VSD_ENVIRONMENT_PARAMETER,
- LOG_CAT_L7VSD_LOGGER,
- LOG_CAT_L7VSD_PARAMETER,
- LOG_CAT_L7VSD_EVENT,
- LOG_CAT_L7VSD_SCHEDULE,
- LOG_CAT_L7VSD_PROGRAM,
- LOG_CAT_L7VSD_PROTOCOL,
- LOG_CAT_L7VSD_MODULE,
-
- LOG_CAT_L7VSADM_PARSE,
- LOG_CAT_L7VSADM_OPERATE,
- LOG_CAT_L7VSADM_COMMUNICATE,
- LOG_CAT_L7VSADM_CONFIG_RESULT,
- LOG_CAT_L7VSADM_COMMON,
- LOG_CAT_L7VSADM_LOGGER,
- LOG_CAT_L7VSADM_PARAMETER,
- LOG_CAT_L7VSADM_PROTOCOL,
- LOG_CAT_L7VSADM_MODULE,
-
- LOG_CAT_SNMPAGENT_START_STOP,
- LOG_CAT_SNMPAGENT_MANAGER_RECEIVE,
- LOG_CAT_SNMPAGENT_MANAGER_SEND,
- LOG_CAT_SNMPAGENT_L7VSD_RECEIVE,
- LOG_CAT_SNMPAGENT_L7VSD_SEND,
- LOG_CAT_SNMPAGENT_LOGGER,
- LOG_CAT_SNMPAGENT_PARAMETER
-};
-
-inline LOG_CATEGORY_TAG& operator++(LOG_CATEGORY_TAG& cat) {
- cat = static_cast<LOG_CATEGORY_TAG>(cat + 1);
- return cat;
-}
-
-/*!
- * Module enumeration.
- */
-enum LOG_MODULE_TAG
-{
- LOG_MOD_L7VSD = 0,
- LOG_MOD_L7VSADM,
- LOG_MOD_SNMPAGENT
-};
-
-/*!
- * Rotation enumeration.
- */
-enum LOG_ROTATION_TAG {
- LOG_ROT_SIZE,
- LOG_ROT_DATE,
- LOG_ROT_DATESIZE
-};
-
-/*!
- * RotationTiming enumeration.
- */
-enum LOG_ROTATION_TIMING_TAG {
- LOG_TIM_YEAR,
- LOG_TIM_MONTH,
- LOG_TIM_WEEK,
- LOG_TIM_DATE,
- LOG_TIM_HOUR
-};
-
-#endif //__LOGGER_ENUM_H__
+/*\r
+ * @file logger_enum.h\r
+ * @brief logger module constants enumeration.\r
+ *\r
+ * L7VSD: Linux Virtual Server for Layer7 Load Balancing\r
+ * Copyright (C) 2008 NTT COMWARE Corporation.\r
+ *\r
+ * This program is free software; you can redistribute it and/or\r
+ * modify it under the terms of the GNU Lesser General Public\r
+ * License as published by the Free Software Foundation; either\r
+ * version 2.1 of the License, or (at your option) any later version.\r
+ *\r
+ * This program is distributed in the hope that it will be useful,\r
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of\r
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU\r
+ * Lesser General Public License for more details.\r
+ *\r
+ * You should have received a copy of the GNU Lesser General Public\r
+ * License along with this library; if not, write to the Free Software\r
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA\r
+ * 02110-1301 USA\r
+ * \r
+ **********************************************************************/\r
+\r
+#ifndef LOGGER_ENUM_H\r
+#define LOGGER_ENUM_H\r
+\r
+#include <string>\r
+#include <log4cxx/level.h>\r
+\r
+namespace l7vs{\r
+\r
+/*!\r
+ * LogLevel enumeration.\r
+ */\r
+enum LOG_LEVEL_TAG\r
+{\r
+ LOG_LV_NONE = 0,\r
+ LOG_LV_DEBUG,\r
+ LOG_LV_INFO,\r
+ LOG_LV_WARN,\r
+ LOG_LV_ERROR,\r
+ LOG_LV_FATAL\r
+};\r
+\r
+inline LOG_LEVEL_TAG& operator++(LOG_LEVEL_TAG& level) {\r
+ level = static_cast<LOG_LEVEL_TAG>(level + 1);\r
+ return level;\r
+}\r
+\r
+/*!\r
+ * Category enumeration.\r
+ * LOG_CAT_SSLPROXY_LOGGER should be first for logger log.\r
+ */\r
+enum LOG_CATEGORY_TAG\r
+{\r
+ LOG_CAT_NONE = 0,\r
+\r
+ LOG_CAT_L7VSD_NETWORK,\r
+ LOG_CAT_L7VSD_NETWORK_QOS,\r
+ LOG_CAT_L7VSD_NETWORK_BANDWIDTH,\r
+ LOG_CAT_L7VSD_NETWORK_NUM_CONNECTION,\r
+ LOG_CAT_L7VSD_MAINTHREAD,\r
+ LOG_CAT_L7VSD_VIRTUALSERVICE,\r
+ LOG_CAT_L7VSD_VIRTUALSERVICE_THRAD,\r
+ LOG_CAT_L7VSD_SESSION,\r
+ LOG_CAT_L7VSD_SESSION_THREAD,\r
+ LOG_CAT_L7VSD_SORRYSERVER,\r
+ LOG_CAT_L7VSD_MODULE,\r
+ LOG_CAT_L7VSD_SCHEDULE,\r
+ LOG_CAT_L7VSD_PROTOCOL,\r
+ LOG_CAT_L7VSD_REPLICATION,\r
+ LOG_CAT_L7VSD_PARAMTER,\r
+ LOG_CAT_L7VSD_LOGGER,\r
+ LOG_CAT_L7VSD_COMMAND,\r
+ LOG_CAT_L7VSD_START_STOP,\r
+ LOG_CAT_L7VSD_SYSTEM,\r
+ LOG_CAT_L7VSD_SYSTEM_MEMORY,\r
+ LOG_CAT_L7VSD_SYSTEM_ENDPOINT,\r
+ LOG_CAT_L7VSD_SYSTEM_SIGNAL,\r
+ LOG_CAT_L7VSD_SYSTEM_ENVIRONMENT,\r
+\r
+ LOG_CAT_L7VSADM_PARSE,\r
+ LOG_CAT_L7VSADM_OPERATE,\r
+ LOG_CAT_l7VSADM_CONFIG_RESULT,\r
+ LOG_CAT_L7VSADM_COMMON,\r
+ LOG_CAT_L7VSADM_LOGGER,\r
+ LOG_CAT_L7VSADM_PARAMETER,\r
+ LOG_CAT_L7VSADM_PROTOCOL,\r
+ LOG_CAT_L7VSADM_MODULE,\r
+\r
+ LOG_CAT_SNMPAGENT_START_STOP,\r
+ LOG_CAT_SNMPAGENT_MANAGER_RECEIVE,\r
+ LOG_CAT_SNMPAGENT_MANAGER_SEND,\r
+ LOG_CAT_SNMPAGENT_L7VSD_RECEIVE,\r
+ LOG_CAT_SNMPAGENT_L7VSD_SEND,\r
+ LOG_CAT_SNMPAGENT_LOGGER,\r
+ LOG_CAT_SNMPAGENT_PARAMETER,\r
+\r
+ LOG_CAT_SSLPROXY_LOGGER,\r
+ LOG_CAT_SSLPROXY_PARAMETER,\r
+ LOG_CAT_SSLPROXY_COMMON,\r
+ LOG_CAT_SSLPROXY_SERVER,\r
+ LOG_CAT_SSLPROXY_SESSION,\r
+ LOG_CAT_SSLPROXY_CONNECTION,\r
+ LOG_CAT_END\r
+};\r
+\r
+\r
+inline LOG_CATEGORY_TAG& operator++(LOG_CATEGORY_TAG& cat) {\r
+ cat = static_cast<LOG_CATEGORY_TAG>(cat + 1);\r
+ return cat;\r
+}\r
+\r
+/*!\r
+ * Rotation enumeration.\r
+ */\r
+enum LOG_ROTATION_TAG {\r
+ LOG_ROT_SIZE,\r
+ LOG_ROT_DATE,\r
+ LOG_ROT_DATESIZE\r
+};\r
+\r
+/*!\r
+ * RotationTiming enumeration.\r
+ */\r
+enum LOG_ROTATION_TIMING_TAG {\r
+ LOG_TIM_YEAR,\r
+ LOG_TIM_MONTH,\r
+ LOG_TIM_WEEK,\r
+ LOG_TIM_DATE,\r
+ LOG_TIM_HOUR\r
+};\r
+\r
+\r
+}; //namespace l7vs \r
+#endif //__LOGGER_ENUM_H__\r
-/*
- * @file logger_impl.cpp
- * @brief logger module implementation class.
- *
- * L7VSD: Linux Virtual Server for Layer7 Load Balancing
- * Copyright (C) 2008 NTT COMWARE Corporation.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation; either
- * version 2.1 of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this library; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- **********************************************************************/
-
-#include <sstream>
-#include <iomanip>
-#include <limits.h>
-#include <log4cxx/logmanager.h>
-#include <log4cxx/helpers/loglog.h>
-#include <log4cxx/rolling/rollingfileappender.h>
-#include <log4cxx/rolling/fixedwindowrollingpolicy.h>
-#include <log4cxx/rolling/sizebasedtriggeringpolicy.h>
-#include <log4cxx/rolling/timebasedrollingpolicy.h>
-#include <log4cxx/consoleappender.h>
-#include <errno.h>
-#include <stdexcept>
-
-#include "logger_impl.h"
-#include "parameter.h"
-#include "lexical_cast.h"
-#include "strict_time_based_rolling_policy.h"
-#include "time_and_size_based_rolling_policy.h"
-
-#define LOGGER_LAYOUT "%d{%Y/%m/%d %H:%M:%S} [%p] %c %m %t %F:%L%n"
-#define LOGGER_DEFAULT_BUFFER_SIZE (8 * 1024)
-#define LOGGER_SYSLOG_FACILITY "USER"
-#define LOGGER_BACKUP_INDEX_LOWER_LIMIT (1)
-#define LOGGER_BACKUP_INDEX_LIMIT (12)
-#define LOGGER_FILESIZE_LOWER_LIMIT (65535)
-#define LOGGER_FILE_PATTERN "%i"
-
-#if defined(LOGGER_PROCESS_VSD)
-#define LOGGER_LOG_FILENAME_KEY "l7vsd_log_filename"
-#define LOGGER_ROTATION_KEY "l7vsd_rotation"
-#define LOGGER_MAX_BACKUP_INDEX_KEY "l7vsd_max_backup_index"
-#define LOGGER_MAX_FILE_SIZE_KEY "l7vsd_max_filesize"
-#define LOGGER_ROTATION_TIMING_KEY "l7vsd_rotation_timing"
-#define LOGGER_ROTATION_TIMING_VALUE_KEY "l7vsd_rotation_timing_value"
-
-#elif defined(LOGGER_PROCESS_ADM)
-#define LOGGER_LOG_FILENAME_KEY "l7vsadm_log_filename"
-#define LOGGER_ROTATION_KEY "l7vsadm_rotation"
-#define LOGGER_MAX_BACKUP_INDEX_KEY "l7vsadm_max_backup_index"
-#define LOGGER_MAX_FILE_SIZE_KEY "l7vsadm_max_filesize"
-#define LOGGER_ROTATION_TIMING_KEY "l7vsadm_rotation_timing"
-#define LOGGER_ROTATION_TIMING_VALUE_KEY "l7vsadm_rotation_timing_value"
-#else //LOGGER_PROCESS_SNM
-#define LOGGER_LOG_FILENAME_KEY "snmpagent_log_filename"
-#define LOGGER_ROTATION_KEY "snmpagent_rotation"
-#define LOGGER_MAX_BACKUP_INDEX_KEY "snmpagent_max_backup_index"
-#define LOGGER_MAX_FILE_SIZE_KEY "snmpagent_max_filesize"
-#define LOGGER_ROTATION_TIMING_KEY "snmpagent_rotation_timing"
-#define LOGGER_ROTATION_TIMING_VALUE_KEY "snmpagent_rotation_timing_value"
-#endif
-
-//! for transration between log4cxx::LevelPtr and LOGER_LEVEL_TAG
-char l7vs::LoggerImpl::categoryTable[][LOGGER_CATEGORY_NUM] = {
- "none",
- "l7vsd_network",
- "l7vsd_network.bandwidth",
- "l7vsd_network.num_connection",
- "l7vsd_network.qos",
- "l7vsd_virtual_service",
- "l7vsd_real_server",
- "l7vsd_sorry_server",
- "l7vsd_real_server.balancing",
- "l7vsd_replication",
- "l7vsd_start_stop",
- "l7vsd_system",
- "l7vsd_system.memory",
- "l7vsd_system.socket",
- "l7vsd_system.signal",
- "l7vsd_environment",
- "l7vsd_environment.parameter",
- "l7vsd_logger",
- "l7vsd_parameter",
- "l7vsd_event",
- "l7vsd_schedule",
- "l7vsd_program",
- "l7vsd_protocol",
- "l7vsd_module",
- "l7vsadm_parse",
- "l7vsadm_operate",
- "l7vsadm_communicate",
- "l7vsadm_config_result",
- "l7vsadm_common",
- "l7vsadm_logger",
- "l7vsadm_parameter",
- "l7vsadm_protocol",
- "l7vsadm_module",
- "snmpagent_start_stop",
- "snmpagent_manager_receive",
- "snmpagent_manager_send",
- "snmpagent_l7vsd_receive",
- "snmpagent_l7vsd_send",
- "snmpagent_logger",
- "snmpagent_parameter"
- };
-
-//! for transration between string and LOGGER_CATEGORY_TAG
-log4cxx::LevelPtr l7vs::LoggerImpl::levelTable[LOGGER_LEVEL_NUM];
-
-/*!
- * returns single instance.
- *
- * @param void
- * @return instance
- */
-l7vs::LoggerImpl& l7vs::LoggerImpl::getInstance()
-{
- if (!instance) {
- instance = new LoggerImpl;
- }
- return *instance;
-}
-
-//! static Logger instance pointer initialized by 0.
-l7vs::LoggerImpl* l7vs::LoggerImpl::instance = 0;
-
-/*!
- * initialize function.
- * logger initialized to use syslogappender and fileappender(/dev/console)
- *
- * @param void
- * @retval true succeed
- * @retval false failed
- */
-bool l7vs::LoggerImpl::init()
-{
- int ret = 0;
- if (initialized) return false;
-
- try {
- log4cxx::LoggerPtr root = log4cxx::Logger::getRootLogger();
- if (0 == root) {
- return false;
- }
- log4cxx::LayoutPtr layout =
- new log4cxx::PatternLayout(LOGGER_LAYOUT);
- log4cxx::net::SyslogAppenderPtr syslogAppender =
- new log4cxx::net::SyslogAppender(layout, log4cxx::net::SyslogAppender::getFacility(LOGGER_SYSLOG_FACILITY));
- root->addAppender(syslogAppender);
- log4cxx::WriterAppender* consoleAppender =
- new log4cxx::ConsoleAppender( layout, log4cxx::ConsoleAppender::getSystemErr() );
- root->addAppender(consoleAppender);
-
- for (LOG_CATEGORY_TAG cat = LOG_CAT_NONE; cat <= getCategoryRangeEnd(LOG_MOD_SNMPAGENT); ++cat) {
- log4cxx::Logger::getLogger(categoryTable[cat])->setLevel(categoryLevel[cat]);
- }
- }
- catch (const std::exception& e) {
- std::ostringstream oss;
- oss << "Logger Initialization Failed : " << e.what();
- errorConf(6, oss.str(), __FILE__, __LINE__);
- return false;
- }
-
- ret = gethostname(hostname, HOST_NAME_LEN);
- if (0 > ret) {
- if (LOG_LV_WARN >= this->getLogLevel(loggerCategory)) {
- this->putLogWarn(loggerCategory,1, "Fail to get Hostname", __FILE__, __LINE__);
- }
- }
-
- if (LOG_LV_INFO >= this->getLogLevel(loggerCategory)) {
- this->putLogInfo(loggerCategory,1, "Logger Initialized.", __FILE__, __LINE__);
- }
-
- initialized = true;
- return true;
-}
-
-/*!
- * error handling function.
- * if error occured, switch appenders to syslogappender and fileappender(/dev/console)
- * message will output to syslog/fileappender appender
- *
- * @param log message id
- * @param log message
- * @param current file
- * @param current line
- * @return void
- */
-void l7vs::LoggerImpl::errorConf(unsigned int message_id, const std::string& errorMessage, const char* file, int line)
-{
- try {
- log4cxx::LogManager::resetConfiguration();
- log4cxx::LoggerPtr root = log4cxx::Logger::getRootLogger();
- if (0 == root)
- return;
- log4cxx::LayoutPtr layout =
- new log4cxx::PatternLayout(LOGGER_LAYOUT);
- log4cxx::net::SyslogAppenderPtr syslogAppender =
- new log4cxx::net::SyslogAppender(layout, log4cxx::net::SyslogAppender::getFacility(LOGGER_SYSLOG_FACILITY));
- log4cxx::ConsoleAppender* consoleAppender = new log4cxx::ConsoleAppender(layout, log4cxx::ConsoleAppender::getSystemErr() );
- root->addAppender(consoleAppender);
- root->addAppender(syslogAppender);
-
- for (LOG_CATEGORY_TAG cat = LOG_CAT_NONE; cat <= getCategoryRangeEnd(LOG_MOD_SNMPAGENT); ++cat) {
- log4cxx::Logger::getLogger(categoryTable[cat])->setLevel(categoryLevel[cat]);
- }
-
- char buf[BUF_LEN];
- snprintf(buf, BUF_LEN, "%s%d%03d%04d %s %s", LOGGER_PROCESS_ID, LOG_LV_FATAL, loggerCategory, message_id, errorMessage.c_str(), hostname);
- log4cxx::Logger::getLogger(categoryTable[loggerCategory])->forcedLog(log4cxx::Level::getFatal(), buf, log4cxx::spi::LocationInfo(file, "", line));
- }
- catch (const std::exception& e) {
- std::ostringstream oss;
- oss << "Logger Error Output Failed : " << e.what() << "\n";
- fputs(oss.str().c_str(), stderr);
- }
-}
-
-/*!
- * load the logger parameter.
- * get settings from parameter component, and configure log4cxx property
- *
- * @param void
- * @return void
- */
-void l7vs::LoggerImpl::loadConf()
-{
- std::string ret;
-
- //get log filename
- if (l7vs::Parameter::getInstance().isStringExist(PARAM_COMP_LOGGER, LOGGER_LOG_FILENAME_KEY)) {
- logFilename = l7vs::Parameter::getInstance().getStringValue(PARAM_COMP_LOGGER, LOGGER_LOG_FILENAME_KEY);
- }
- else {
- if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {
- this->putLogError(loggerCategory,1, "Not Exist Log Filename Setting.", __FILE__, __LINE__);
- }
- throw std::logic_error("Not Exist Log Filename Setting.");
- }
-
- //get rotation
- if (l7vs::Parameter::getInstance().isStringExist(PARAM_COMP_LOGGER, LOGGER_ROTATION_KEY)) {
- std::string rotationStr = l7vs::Parameter::getInstance().getStringValue(PARAM_COMP_LOGGER, LOGGER_ROTATION_KEY);
- if ("size" == rotationStr) rotation = LOG_ROT_SIZE;
- else if ("date" == rotationStr) rotation = LOG_ROT_DATE;
- else if ("datesize" == rotationStr) rotation = LOG_ROT_DATESIZE;
- else {
- if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {
- this->putLogError(loggerCategory,2, "Invalid Log Rotation Setting.", __FILE__, __LINE__);
- }
- throw std::logic_error("Invalid Log Rotation Setting.");
- }
- }
- else {
- if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {
- this->putLogError(loggerCategory,3, "Not Exist Log Rotation Setting.", __FILE__, __LINE__);
- }
- throw std::logic_error("Not Exist Log Rotation Setting.");
- }
-
- //get max backup index
- if (l7vs::Parameter::getInstance().isStringExist(PARAM_COMP_LOGGER, LOGGER_MAX_BACKUP_INDEX_KEY)) {
- std::string maxBackupIndexStr = l7vs::Parameter::getInstance().getStringValue(PARAM_COMP_LOGGER, LOGGER_MAX_BACKUP_INDEX_KEY);
- try {
- maxBackupIndex = lexical_cast<unsigned int>(maxBackupIndexStr);
- }
- catch (const l7vs::bad_lexical_cast& bc) {
- if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {
- this->putLogError(loggerCategory,4, "Invalid MaxBackupIndex Value.", __FILE__, __LINE__);
- }
- throw std::logic_error("Invalid MaxBackupIndex Value.");
- }
- if (LOGGER_BACKUP_INDEX_LOWER_LIMIT > maxBackupIndex) {
- std::ostringstream oss;
- oss << "Max Backup Index must at least " << LOGGER_BACKUP_INDEX_LOWER_LIMIT << ".";
- if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {
- this->putLogError(loggerCategory,5, oss.str(), __FILE__, __LINE__);
- }
- throw std::logic_error(oss.str());
- }
- if (LOGGER_BACKUP_INDEX_LIMIT < maxBackupIndex) {
- std::ostringstream oss;
- oss << "Max Backup Index must at most " << LOGGER_BACKUP_INDEX_LIMIT << ".";
- if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {
- this->putLogError(loggerCategory,6, oss.str(), __FILE__, __LINE__);
- }
- throw std::logic_error(oss.str());
- }
- }
- else {
- if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {
- this->putLogError(loggerCategory,7, "Not Exist Log MaxBackupIndex Setting.", __FILE__, __LINE__);
- }
- throw std::logic_error("Not Exist Log MaxBackupIndex Setting.");
- }
-
- if (LOG_ROT_SIZE == rotation || LOG_ROT_DATESIZE == rotation) {
- // get max file size
- std::string maxFileSizeStr;
- if (l7vs::Parameter::getInstance().isStringExist(PARAM_COMP_LOGGER, LOGGER_MAX_FILE_SIZE_KEY)) {
- maxFileSizeStr = l7vs::Parameter::getInstance().getStringValue(PARAM_COMP_LOGGER, LOGGER_MAX_FILE_SIZE_KEY);
- }
- else {
- if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {
- this->putLogError(loggerCategory,8, "Not Exist Log MaxFileSize Setting.", __FILE__, __LINE__);
- }
- throw std::logic_error("Not Exist Log MaxFileSize Setting.");
- }
-
- std::string size_val;
- std::string last_str = maxFileSizeStr.substr(maxFileSizeStr.length() - 1, 1);
- // when unit was specified
- if (("K" == last_str) || ("M" == last_str) || ("G" == last_str)) {
- size_val = maxFileSizeStr.substr(0, maxFileSizeStr.length() - 1);
- }
- else {
- size_val = maxFileSizeStr;
- }
-
- try {
- maxFileSize = lexical_cast<size_t>(size_val);
- }
- catch (const l7vs::bad_lexical_cast& bc) {
- if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {
- this->putLogError(loggerCategory,9, "Invalid FileSize Value.", __FILE__, __LINE__);
- }
- throw std::logic_error("Invalid FileSize Value.");
- }
-
- if ("K" == last_str) {
- if ((ULLONG_MAX / 1024) < maxFileSize) {
- if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {
- this->putLogError(loggerCategory,10, "Invalid FileSize Value.", __FILE__, __LINE__);
- }
- throw std::logic_error("Invalid FileSize Value.");
- }
- maxFileSize = maxFileSize * 1024;
- }
- else if ("M" == last_str) {
- if ((ULLONG_MAX / 1024 / 1024) < maxFileSize) {
- if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {
- this->putLogError(loggerCategory,11, "Invalid FileSize Value.", __FILE__, __LINE__);
- }
- throw std::logic_error("Invalid FileSize Value.");
- }
- maxFileSize = maxFileSize * 1024 * 1024;
- }
- else if ("G" == last_str) {
- if ((ULLONG_MAX / 1024 / 1024 / 1024) < maxFileSize) {
- if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {
- this->putLogError(loggerCategory,12, "Invalid FileSize Value.", __FILE__, __LINE__);
- }
- throw std::logic_error("Invalid FileSize Value.");
- }
- maxFileSize = maxFileSize * 1024 * 1024 * 1024;
- }
- if (LOGGER_FILESIZE_LOWER_LIMIT > maxFileSize) {
- int limit = LOGGER_FILESIZE_LOWER_LIMIT;
- std::ostringstream oss;
- oss << "FileSize must at least " << limit << " bytes.";
- if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {
- this->putLogError(loggerCategory,13, oss.str(), __FILE__, __LINE__);
- }
- throw std::logic_error(oss.str());
- }
- }
-
- if (LOG_ROT_DATE == rotation || LOG_ROT_DATESIZE == rotation) {
- // get rotation timing
- if (l7vs::Parameter::getInstance().isStringExist(PARAM_COMP_LOGGER, LOGGER_ROTATION_TIMING_KEY)) {
- std::string rotationTimingStr = l7vs::Parameter::getInstance().getStringValue(PARAM_COMP_LOGGER, LOGGER_ROTATION_TIMING_KEY);
- if ("year" == rotationTimingStr) rotationTiming = LOG_TIM_YEAR;
- else if ("month" == rotationTimingStr) rotationTiming = LOG_TIM_MONTH;
- else if ("week" == rotationTimingStr) rotationTiming = LOG_TIM_WEEK;
- else if ("date" == rotationTimingStr) rotationTiming = LOG_TIM_DATE;
- else if ("hour" == rotationTimingStr) rotationTiming = LOG_TIM_HOUR;
- else {
- if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {
- this->putLogError(loggerCategory,14, "Invalid Log RotationTiming Setting.", __FILE__, __LINE__);
- }
- throw std::logic_error("Invalid Log RotationTiming Setting.");
- }
- }
- else {
- if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {
- this->putLogError(loggerCategory,15, "Not Exist Log RotaionTiming Setting.", __FILE__, __LINE__);
- }
- throw std::logic_error("Not Exist Log RotaionTiming Setting.");
- }
-
- if (LOG_TIM_YEAR == rotationTiming) {
- if (l7vs::Parameter::getInstance().isStringExist(PARAM_COMP_LOGGER, LOGGER_ROTATION_TIMING_VALUE_KEY)) {
- ret = l7vs::Parameter::getInstance().getStringValue(PARAM_COMP_LOGGER, LOGGER_ROTATION_TIMING_VALUE_KEY);
-
- std::string::size_type fpos = 0;
- std::string::size_type rpos = 0;
- int month = 0;
- int date = 0;
- int hour = 0;
- int minute = 0;
- // find month
- rpos = ret.find_first_of('/', fpos);
- if (std::string::npos != rpos) {
- std::string monthStr = ret.substr(fpos, rpos - fpos);
- try {
- month = lexical_cast<int>(monthStr);
- }
- catch (const l7vs::bad_lexical_cast& bc) {
- if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {
- this->putLogError(loggerCategory,16, "Parse Timing Year Error.", __FILE__, __LINE__);
- }
- throw std::logic_error("Parse Timing Year Error.");
- }
- if (1 > month || month > 12) {
- if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {
- this->putLogError(loggerCategory,17, "Parse Timing Year Error.", __FILE__, __LINE__);
- }
- throw std::logic_error("Parse Timing Year Error.");
- }
- fpos = rpos + 1;
- // find date
- rpos = ret.find_first_of(' ', fpos);
- if (std::string::npos != rpos) {
- std::string dateStr = ret.substr(fpos, rpos - fpos);
- try {
- date = lexical_cast<int>(dateStr);
- }
- catch (const l7vs::bad_lexical_cast& bc) {
- if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {
- this->putLogError(loggerCategory,18, "Parse Timing Year Error.", __FILE__, __LINE__);
- }
- throw std::logic_error("Parse Timing Year Error.");
- }
- if (1 > date || date > 31) {
- if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {
- this->putLogError(loggerCategory,19, "Parse Timing Year Error.", __FILE__, __LINE__);
- }
- throw std::logic_error("Parse Timing Year Error.");
- }
- int dates[] = {31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31};
- if (date > dates[month - 1]) {
- if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {
- this->putLogError(loggerCategory,20, "Parse Timing Year Error.", __FILE__, __LINE__);
- }
- throw std::logic_error("Parse Timing Year Error.");
- }
- fpos = rpos + 1;
- // find hour
- rpos = ret.find_first_of(':', fpos);
- if (std::string::npos != rpos) {
- std::string hourStr = ret.substr(fpos, rpos - fpos);
- try {
- hour = lexical_cast<int>(hourStr);
- }
- catch (const l7vs::bad_lexical_cast& bc) {
- if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {
- this->putLogError(loggerCategory,21, "Parse Timing Year Error.", __FILE__, __LINE__);
- }
- throw std::logic_error("Parse Timing Year Error.");
- }
- if (0 > hour || hour > 23) {
- if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {
- this->putLogError(loggerCategory,22, "Parse Timing Year Error.", __FILE__, __LINE__);
- }
- throw std::logic_error("Parse Timing Year Error.");
- }
- // minute
- std::string minuteStr = ret.substr(rpos + 1);
- try {
- minute = lexical_cast<int>(minuteStr);
- }
- catch (const l7vs::bad_lexical_cast& bc) {
- if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {
- this->putLogError(loggerCategory,23, "Parse Timing Year Error.", __FILE__, __LINE__);
- }
- throw std::logic_error("Parse Timing Year Error.");
- }
- if (0 > minute || minute > 59) {
- if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {
- this->putLogError(loggerCategory,24, "Parse Timing Year Error.", __FILE__, __LINE__);
- }
- throw std::logic_error("Parse Timing Year Error.");
- }
- }
- else {
- if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {
- this->putLogError(loggerCategory,25, "Parse Timing Year Error.", __FILE__, __LINE__);
- }
- throw std::logic_error("Parse Timing Year Error.");
- }
- }
- else {
- if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {
- this->putLogError(loggerCategory,26, "Parse Timing Year Error.", __FILE__, __LINE__);
- }
- throw std::logic_error("Parse Timing Year Error.");
- }
- }
- else {
- if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {
- this->putLogError(loggerCategory,27, "Parse Timing Year Error.", __FILE__, __LINE__);
- }
- throw std::logic_error("Parse Timing Year Error.");
- }
-
- // format to internal rotation timing value expresson
- std::ostringstream oss;
- oss << std::setfill('0') << std::setw(2) << month
- << std::setfill('0') << std::setw(2) << date
- << std::setfill('0') << std::setw(2) << hour
- << std::setfill('0') << std::setw(2) << minute;
-
- rotationTimingValue = oss.str();
-
- }
- else {
- if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {
- this->putLogError(loggerCategory,28, "Not Exist Log RotaionTiming Year Setting.", __FILE__, __LINE__);
- }
- throw std::logic_error("Not Exist Log RotaionTiming Year Setting.");
- }
- }
-
- if (LOG_TIM_MONTH == rotationTiming) {
- if (l7vs::Parameter::getInstance().isStringExist(PARAM_COMP_LOGGER, LOGGER_ROTATION_TIMING_VALUE_KEY)) {
- ret = l7vs::Parameter::getInstance().getStringValue(PARAM_COMP_LOGGER, LOGGER_ROTATION_TIMING_VALUE_KEY);
-
- std::string::size_type fpos = 0;
- std::string::size_type rpos = 0;
- int date = 0;
- int hour = 0;
- int minute = 0;
- // find day
- rpos = ret.find_first_of(' ', fpos);
- if (std::string::npos != rpos) {
- std::string dateStr = ret.substr(fpos, rpos - fpos);
- try {
- date = lexical_cast<int>(dateStr);
- }
- catch (const l7vs::bad_lexical_cast& bc) {
- if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {
- this->putLogError(loggerCategory,29, "Parse Timing Month Error.", __FILE__, __LINE__);
- }
- throw std::logic_error("Parse Timing Month Error.");
- }
- if (1 > date || date > 31) {
- if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {
- this->putLogError(loggerCategory,30, "Parse Timing Month Error.", __FILE__, __LINE__);
- }
- throw std::logic_error("Parse Timing Month Error.");
- }
- fpos = rpos + 1;
- // find hour
- rpos = ret.find_first_of(':', fpos);
- if (std::string::npos != rpos) {
- std::string hourStr = ret.substr(fpos, rpos - fpos);
- try {
- hour = lexical_cast<int>(hourStr);
- }
- catch (const l7vs::bad_lexical_cast& bc) {
- if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {
- this->putLogError(loggerCategory,31, "Parse Timing Month Error.", __FILE__, __LINE__);
- }
- throw std::logic_error("Parse Timing Month Error.");
- }
- if (0 > hour || hour > 23) {
- if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {
- this->putLogError(loggerCategory,32, "Parse Timing Month Error.", __FILE__, __LINE__);
- }
- throw std::logic_error("Parse Timing Month Error.");
- }
- // minute
- std::string minuteStr = ret.substr(rpos + 1);
- try {
- minute = lexical_cast<int>(minuteStr);
- }
- catch (const l7vs::bad_lexical_cast& bc) {
- if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {
- this->putLogError(loggerCategory,33, "Parse Timing Month Error.", __FILE__, __LINE__);
- }
- throw std::logic_error("Parse Timing Month Error.");
- }
- if (0 > minute || minute > 59) {
- if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {
- this->putLogError(loggerCategory,34, "Parse Timing Month Error.", __FILE__, __LINE__);
- }
- throw std::logic_error("Parse Timing Month Error.");
- }
- }
- else {
- if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {
- this->putLogError(loggerCategory,35, "Parse Timing Month Error.", __FILE__, __LINE__);
- }
- throw std::logic_error("Parse Timing Month Error.");
- }
- }
- else {
- if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {
- this->putLogError(loggerCategory,36, "Parse Timing Month Error.", __FILE__, __LINE__);
- }
- throw std::logic_error("Parse Timing Month Error.");
- }
-
- // format to internal rotation timing value expresson
- std::ostringstream oss;
- oss << std::setfill('0') << std::setw(2) << date
- << std::setfill('0') << std::setw(2) << hour
- << std::setfill('0') << std::setw(2) << minute;
-
- rotationTimingValue = oss.str();
-
- }
- else {
- if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {
- this->putLogError(loggerCategory,37, "Not Exist Log RotaionTiming Month Setting.", __FILE__, __LINE__);
- }
- throw std::logic_error("Not Exist Log RotaionTiming Month Setting.");
- }
- }
-
- if (LOG_TIM_WEEK == rotationTiming) {
- if (l7vs::Parameter::getInstance().isStringExist(PARAM_COMP_LOGGER, LOGGER_ROTATION_TIMING_VALUE_KEY)) {
- ret = l7vs::Parameter::getInstance().getStringValue(PARAM_COMP_LOGGER, LOGGER_ROTATION_TIMING_VALUE_KEY);
-
- std::string::size_type fpos = 0;
- std::string::size_type rpos = 0;
- int week = 0;
- int hour = 0;
- int minute = 0;
- rpos = ret.find_first_of(' ', fpos);
- //find week
- if (std::string::npos != rpos) {
- std::string weekStr = ret.substr(fpos, rpos - fpos);
-
- if ("sun" == weekStr) week = 0;
- else if ("mon" == weekStr) week = 1;
- else if ("tue" == weekStr) week = 2;
- else if ("wed" == weekStr) week = 3;
- else if ("thu" == weekStr) week = 4;
- else if ("fri" == weekStr) week = 5;
- else if ("sat" == weekStr) week = 6;
- else {
- if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {
- this->putLogError(loggerCategory,38, "Parse Timing Week Error.", __FILE__, __LINE__);
- }
- throw std::logic_error("Parse Timing Week Error.");
- }
- fpos = rpos + 1;
- // find hour
- rpos = ret.find_first_of(':', fpos);
- if (std::string::npos != rpos) {
- std::string hourStr = ret.substr(fpos, rpos - fpos);
- try {
- hour = lexical_cast<int>(hourStr);
- }
- catch (const l7vs::bad_lexical_cast& bc) {
- if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {
- this->putLogError(loggerCategory,39, "Parse Timing Week Error.", __FILE__, __LINE__);
- }
- throw std::logic_error("Parse Timing Week Error.");
- }
- if (0 > hour || hour > 23) {
- if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {
- this->putLogError(loggerCategory,40, "Parse Timing Week Error.", __FILE__, __LINE__);
- }
- throw std::logic_error("Parse Timing Week Error.");
- }
- // minute
- std::string minuteStr = ret.substr(rpos + 1);
- try {
- minute = lexical_cast<int>(minuteStr);
- }
- catch (const l7vs::bad_lexical_cast& bc) {
- if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {
- this->putLogError(loggerCategory,41, "Parse Timing Week Error.", __FILE__, __LINE__);
- }
- throw std::logic_error("Parse Timing Week Error.");
- }
- if (0 > minute || minute > 59) {
- if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {
- this->putLogError(loggerCategory,42, "Parse Timing Week Error.", __FILE__, __LINE__);
- }
- throw std::logic_error("Parse Timing Week Error.");
- }
- }
- else {
- if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {
- this->putLogError(loggerCategory,43, "Parse Timing Week Error.", __FILE__, __LINE__);
- }
- throw std::logic_error("Parse Timing Week Error.");
- }
- }
- else {
- if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {
- this->putLogError(loggerCategory,44, "Parse Timing Week Error.", __FILE__, __LINE__);
- }
- throw std::logic_error("Parse Timing Week Error.");
- }
-
- // format to internal rotation timing value expresson
- std::ostringstream oss;
- oss << std::setfill('0') << std::setw(1) << week
- << std::setfill('0') << std::setw(2) << hour
- << std::setfill('0') << std::setw(2) << minute;
-
- rotationTimingValue = oss.str();
-
- }
- else {
- if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {
- this->putLogError(loggerCategory,45, "Not Exist Log RotaionTiming Week Setting.", __FILE__, __LINE__);
- }
- throw std::logic_error("Not Exist Log RotaionTiming Week Setting.");
- }
- }
-
- if (LOG_TIM_DATE == rotationTiming) {
- if (l7vs::Parameter::getInstance().isStringExist(PARAM_COMP_LOGGER, LOGGER_ROTATION_TIMING_VALUE_KEY)) {
- ret = l7vs::Parameter::getInstance().getStringValue(PARAM_COMP_LOGGER, LOGGER_ROTATION_TIMING_VALUE_KEY);
-
- std::string::size_type fpos = 0;
- std::string::size_type rpos = 0;
- int hour = 0;
- int minute = 0;
- //find time
- rpos = ret.find_first_of(':', fpos);
- if (std::string::npos != rpos) {
- std::string hourStr = ret.substr(fpos, rpos - fpos);
- try {
- hour = lexical_cast<int>(hourStr);
- }
- catch (const l7vs::bad_lexical_cast& bc) {
- if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {
- this->putLogError(loggerCategory,46, "Parse Timing Date Error.", __FILE__, __LINE__);
- }
- throw std::logic_error("Parse Timing Date Error.");
- }
- if (0 > hour || hour > 23) {
- if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {
- this->putLogError(loggerCategory,47, "Parse Timing Date Error.", __FILE__, __LINE__);
- }
- throw std::logic_error("Parse Timing Date Error.");
- }
- // minute
- std::string minuteStr = ret.substr(rpos + 1);
- try {
- minute = lexical_cast<int>(minuteStr);
- }
- catch (const l7vs::bad_lexical_cast& bc) {
- if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {
- this->putLogError(loggerCategory,48, "Parse Timing Date Error.", __FILE__, __LINE__);
- }
- throw std::logic_error("Parse Timing Date Error.");
- }
- if (0 > minute || minute > 59) {
- if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {
- this->putLogError(loggerCategory,49, "Parse Timing Date Error.", __FILE__, __LINE__);
- }
- throw std::logic_error("Parse Timing Date Error.");
- }
- }
- else {
- if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {
- this->putLogError(loggerCategory,50, "Parse Timing Date Error.", __FILE__, __LINE__);
- }
- throw std::logic_error("Parse Timing Date Error.");
- }
-
- // format to internal rotation timing value expresson
- std::ostringstream oss;
- oss << std::setfill('0') << std::setw(2) << hour
- << std::setfill('0') << std::setw(2) << minute;
-
- rotationTimingValue = oss.str();
-
- }
- else {
- if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {
- this->putLogError(loggerCategory,51, "Not Exist Log RotaionTiming Date Setting.", __FILE__, __LINE__);
- }
- throw std::logic_error("Not Exist Log RotaionTiming Date Setting.");
- }
- }
-
- if (LOG_TIM_HOUR == rotationTiming) {
- if (l7vs::Parameter::getInstance().isStringExist(PARAM_COMP_LOGGER, LOGGER_ROTATION_TIMING_VALUE_KEY)) {
- ret = l7vs::Parameter::getInstance().getStringValue(PARAM_COMP_LOGGER, LOGGER_ROTATION_TIMING_VALUE_KEY);
-
- // minute
- int minute = 0;
- try {
- minute = lexical_cast<int>(ret);
- }
- catch (const l7vs::bad_lexical_cast& bc) {
- if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {
- this->putLogError(loggerCategory,52, "Parse Timing Hour Error.", __FILE__, __LINE__);
- }
- throw std::logic_error("Parse Timing Hour Error.");
- }
- if (0 > minute || minute > 59) {
- if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {
- this->putLogError(loggerCategory,53, "Parse Timing Hour Error.", __FILE__, __LINE__);
- }
- throw std::logic_error("Parse Timing Hour Error.");
- }
-
- // format to internal rotation timing value expresson
- std::ostringstream oss;
- oss << std::setfill('0') << std::setw(2) << minute;
-
- rotationTimingValue = oss.str();
-
- }
- else {
- if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {
- this->putLogError(loggerCategory,54, "Not Exist Log RotaionTiming Hour Setting.", __FILE__, __LINE__);
- }
- throw std::logic_error("Not Exist Log RotaionTiming Hour Setting.");
- }
- }
- }
-
- try {
- // reset current configuration
- log4cxx::helpers::Pool pool;
- log4cxx::LogManager::resetConfiguration();
- log4cxx::LoggerPtr root = log4cxx::Logger::getRootLogger();
- if (0 == root) {
- throw std::logic_error("getRootLogger Failed.");
- }
- log4cxx::LayoutPtr layout =
- new log4cxx::PatternLayout(LOGGER_LAYOUT);
-
- switch (rotation) {
- case LOG_ROT_SIZE:
- {
- // create FixedWindowRollingPolicy
- log4cxx::rolling::FixedWindowRollingPolicyPtr fixedRollingPolicy =
- new log4cxx::rolling::FixedWindowRollingPolicy();
-
- // setting minIndex
- fixedRollingPolicy->setMinIndex(1);
-
- // setting maxIndex
- fixedRollingPolicy->setMaxIndex(maxBackupIndex);
-
- // setting FileNamePattern
- std::ostringstream sizeFile;
- sizeFile << logFilename << "." << LOGGER_FILE_PATTERN;
- fixedRollingPolicy->setFileNamePattern(sizeFile.str());
-
- // create SizeBasedTriggeringPolicy
- log4cxx::rolling::SizeBasedTriggeringPolicyPtr sizeTriggeringPolicy =
- new log4cxx::rolling::SizeBasedTriggeringPolicy();
-
- // setting maxFileSize
- sizeTriggeringPolicy->setMaxFileSize(maxFileSize);
-
- // create RollingFileAppender
- log4cxx::rolling::RollingFileAppenderPtr sizeAppender =
- new log4cxx::rolling::RollingFileAppender();
-
- // set layout
- sizeAppender->setLayout(layout);
-
- // set RollingPolicy
- sizeAppender->setRollingPolicy(fixedRollingPolicy);
-
- // set TriggeringPolicy
- sizeAppender->setTriggeringPolicy(sizeTriggeringPolicy);
-
- // set Log Filename
- sizeAppender->setFile(logFilename, true, false, LOGGER_DEFAULT_BUFFER_SIZE, pool);
-
- // activate appender options
- sizeAppender->activateOptions(pool);
-
- // add size_base_appender to rootLogger
- root->addAppender(sizeAppender);
-
- break;
- }
- case LOG_ROT_DATE:
- {
- // create StrictTimeBasedRollingPolicy
- log4cxx::rolling::StrictTimeBasedRollingPolicyPtr strictRollingPolicy =
- new log4cxx::rolling::StrictTimeBasedRollingPolicy();
-
- // setting minIndex
- strictRollingPolicy->setMinIndex(1);
-
- // setting maxIndex
- strictRollingPolicy->setMaxIndex(maxBackupIndex);
-
- // setting FileNamePattern
- std::ostringstream dateFile;
- dateFile << logFilename << "." << LOGGER_FILE_PATTERN;
- strictRollingPolicy->setFileNamePattern(dateFile.str());
-
- // setting Rotation Timing
- strictRollingPolicy->setRotationTiming(rotationTiming);
-
- // setting Rotation Timing Value
- strictRollingPolicy->setRotationTimingValue(rotationTimingValue);
-
- //create RollingFileAppender
- log4cxx::rolling::RollingFileAppenderPtr dateAppender =
- new log4cxx::rolling::RollingFileAppender();
-
- // set layout
- dateAppender->setLayout(layout);
-
- // set RollingPolicy (TriggeringPolicy also included RollingPolicy)
- dateAppender->setRollingPolicy(strictRollingPolicy);
-
- // set Log Filename
- dateAppender->setFile(logFilename, true, false, LOGGER_DEFAULT_BUFFER_SIZE, pool);
-
- // activate appender options
- dateAppender->activateOptions(pool);
-
- // add date_based_appender to rootRogger
- root->addAppender(dateAppender);
-
- break;
- }
- default: //LOG_ROT_DATESIZE:
- {
- // create TimeAndSizeBasedRollingPolicy
- log4cxx::rolling::TimeAndSizeBasedRollingPolicyPtr timeSizeRollingPolicy =
- new log4cxx::rolling::TimeAndSizeBasedRollingPolicy();
-
- // setting minIndex
- timeSizeRollingPolicy->setMinIndex(1);
-
- // setting maxIndex
- timeSizeRollingPolicy->setMaxIndex(maxBackupIndex);
-
- // setting FileNamePattern
- std::ostringstream dateSizeFile;
- dateSizeFile << logFilename << "." << LOGGER_FILE_PATTERN;
- timeSizeRollingPolicy->setFileNamePattern(dateSizeFile.str());
-
- // setting Rotation Timing
- timeSizeRollingPolicy->setRotationTiming(rotationTiming);
-
- // setting Rotation Timing Value
- timeSizeRollingPolicy->setRotationTimingValue(rotationTimingValue);
-
- // setting MaxFileSize
- timeSizeRollingPolicy->setMaxFileSize(maxFileSize);
-
- // create Rolling FileAppender
- log4cxx::rolling::RollingFileAppenderPtr dateSizeAppender =
- new log4cxx::rolling::RollingFileAppender();
-
- // set layout
- dateSizeAppender->setLayout(layout);
-
- // set RollingPolicy (TriggeringPolicy also included RollingPolicy)
- dateSizeAppender->setRollingPolicy(timeSizeRollingPolicy);
-
- // set Log Filename
- dateSizeAppender->setFile(logFilename, true, false, LOGGER_DEFAULT_BUFFER_SIZE, pool);
-
- // activate appender options
- dateSizeAppender->activateOptions(pool);
-
- // add time_and_size_based_appender to rootLogger
- root->addAppender(dateSizeAppender);
- }
- }
- //set default log level
- for (LOG_CATEGORY_TAG cat = LOG_CAT_NONE; cat <= getCategoryRangeEnd(LOG_MOD_SNMPAGENT); ++cat) {
- log4cxx::Logger::getLogger(categoryTable[cat])->setLevel(categoryLevel[cat]);
- }
-
- //get category level
- for (LOG_CATEGORY_TAG cat = getCategoryRangeStart(loggerProcess); cat <= getCategoryRangeEnd(loggerProcess); ++cat) {
- if (l7vs::Parameter::getInstance().isStringExist(PARAM_COMP_LOGGER, categoryTable[cat])) {
- std::string levelStr = l7vs::Parameter::getInstance().getStringValue(PARAM_COMP_LOGGER, categoryTable[cat]);
- if ("debug" == levelStr) {
- categoryLevel[cat] = log4cxx::Level::getDebug();
- log4cxx::Logger::getLogger(categoryTable[cat])->setLevel(categoryLevel[cat]);
- }
- else if ("info" == levelStr) {
- categoryLevel[cat] = log4cxx::Level::getInfo();
- log4cxx::Logger::getLogger(categoryTable[cat])->setLevel(categoryLevel[cat]);
- }
- else if ("warn" == levelStr) {
- categoryLevel[cat] = log4cxx::Level::getWarn();
- log4cxx::Logger::getLogger(categoryTable[cat])->setLevel(categoryLevel[cat]);
- }
- else if ("error" == levelStr) {
- categoryLevel[cat] = log4cxx::Level::getError();
- log4cxx::Logger::getLogger(categoryTable[cat])->setLevel(categoryLevel[cat]);
- }
- else if ("fatal" == levelStr) {
- categoryLevel[cat] = log4cxx::Level::getFatal();
- log4cxx::Logger::getLogger(categoryTable[cat])->setLevel(categoryLevel[cat]);
- }
- else {
- std::ostringstream oss;
- oss << "Invalid Log Category Setting : " << categoryTable[cat];
- if (LOG_LV_WARN >= this->getLogLevel(loggerCategory)) {
- this->putLogWarn(loggerCategory,2, oss.str(), __FILE__, __LINE__);
- }
- categoryLevel[cat] = log4cxx::Level::getInfo();
- log4cxx::Logger::getLogger(categoryTable[cat])->setLevel(categoryLevel[cat]);
- }
- }
- else {
- std::ostringstream oss;
- oss << "Not Exist Log Category Setting : " << categoryTable[cat];
- if (LOG_LV_WARN >= this->getLogLevel(loggerCategory)) {
- this->putLogWarn(loggerCategory,3, oss.str(), __FILE__, __LINE__);
- }
- categoryLevel[cat] = log4cxx::Level::getInfo();
- log4cxx::Logger::getLogger(categoryTable[cat])->setLevel(categoryLevel[cat]);
- }
- }
- }
- catch (const std::exception& e) {
- std::ostringstream oss;
- oss << "Logger Reload Config Failed : " << e.what();
- errorConf(7, oss.str(), __FILE__, __LINE__);
- throw std::logic_error(oss.str());
- }
-
- if (LOG_LV_INFO >= this->getLogLevel(loggerCategory)) {
- this->putLogInfo(loggerCategory,2, "Logger Configuration Succeed.", __FILE__, __LINE__);
- }
- initLogLevelTable();
-}
-
-/*!
- * initialize LogLevel table.
- * initialize the LogLevel table.
- *
- * @param void
- * @return void
- */
-void l7vs::LoggerImpl::initLogLevelTable(void)
-{
- int nCounter = 0;
-
- for (;nCounter < LOGGER_CATEGORY_NUM; nCounter++) {
- loglevel[nCounter] = LOG_LV_NONE;
- }
-
- return;
-}
+/*\r
+ * @file logger_impl.cpp\r
+ * @brief logger module implementation class.\r
+ *\r
+ * L7VSD: Linux Virtual Server for Layer7 Load Balancing\r
+ * Copyright (C) 2008 NTT COMWARE Corporation.\r
+ *\r
+ * This program is free software; you can redistribute it and/or\r
+ * modify it under the terms of the GNU Lesser General Public\r
+ * License as published by the Free Software Foundation; either\r
+ * version 2.1 of the License, or (at your option) any later version.\r
+ *\r
+ * This program is distributed in the hope that it will be useful,\r
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of\r
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU\r
+ * Lesser General Public License for more details.\r
+ *\r
+ * You should have received a copy of the GNU Lesser General Public\r
+ * License along with this library; if not, write to the Free Software\r
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA\r
+ * 02110-1301 USA\r
+ *\r
+ **********************************************************************/\r
+\r
+#include <sstream>\r
+#include <iomanip>\r
+#include <limits.h>\r
+#include <log4cxx/logmanager.h>\r
+#include <log4cxx/helpers/loglog.h>\r
+#include <log4cxx/rolling/rollingfileappender.h>\r
+#include <log4cxx/rolling/fixedwindowrollingpolicy.h>\r
+#include <log4cxx/rolling/sizebasedtriggeringpolicy.h>\r
+#include <log4cxx/rolling/timebasedrollingpolicy.h>\r
+#include <log4cxx/consoleappender.h>\r
+#include <errno.h>\r
+#include <stdexcept>\r
+#include <boost/lexical_cast.hpp>\r
+\r
+#include "logger_impl.h"\r
+#include "parameter.h"\r
+#include "strict_time_based_rolling_policy.h"\r
+#include "time_and_size_based_rolling_policy.h"\r
+\r
+#define LOGGER_LAYOUT "%d{%Y/%m/%d %H:%M:%S} [%p] %c %m %t %F:%L%n"\r
+#define LOGGER_DEFAULT_BUFFER_SIZE (8 * 1024)\r
+#define LOGGER_SYSLOG_FACILITY "USER"\r
+#define LOGGER_BACKUP_INDEX_LOWER_LIMIT (1)\r
+#define LOGGER_BACKUP_INDEX_LIMIT (12)\r
+#define LOGGER_FILESIZE_LOWER_LIMIT (65535)\r
+#define LOGGER_FILE_PATTERN "%i"\r
+\r
+#define LOGGER_LOG_FILENAME_KEY "sslproxy_log_filename"\r
+#define LOGGER_ROTATION_KEY "sslproxy_rotation"\r
+#define LOGGER_MAX_BACKUP_INDEX_KEY "sslproxy_max_backup_index"\r
+#define LOGGER_MAX_FILE_SIZE_KEY "sslproxy_max_filesize"\r
+#define LOGGER_ROTATION_TIMING_KEY "sslproxy_rotation_timing"\r
+#define LOGGER_ROTATION_TIMING_VALUE_KEY "sslproxy_rotation_timing_value"\r
+\r
+#define LOGGER_CONN_LOG_FILENAME_KEY "conn_log_filename"\r
+#define LOGGER_CONN_ROTATION_KEY "conn_rotation"\r
+#define LOGGER_CONN_MAX_BACKUP_INDEX_KEY "conn_max_backup_index"\r
+#define LOGGER_CONN_MAX_FILE_SIZE_KEY "conn_max_filesize"\r
+#define LOGGER_CONN_ROTATION_TIMING_KEY "conn_rotation_timing"\r
+#define LOGGER_CONN_ROTATION_TIMING_VALUE_KEY "conn_rotation_timing_value"\r
+\r
+//! for transration between log4cxx::LevelPtr and LOGER_LEVEL_TAG\r
+char l7vs::LoggerImpl::categoryTable[][LOGGER_CATEGORY_NUM] = { \r
+ "none",\r
+ "sslproxy_logger",\r
+ "sslproxy_parameter",\r
+ "sslproxy_common",\r
+ "sslproxy_server",\r
+ "sslproxy_session",\r
+ "sslproxy_connection",\r
+ "end"\r
+ };\r
+\r
+//! for transration between string and LOGGER_CATEGORY_TAG\r
+log4cxx::LevelPtr l7vs::LoggerImpl::levelTable[LOGGER_LEVEL_NUM];\r
+\r
+/*!\r
+ * returns single instance.\r
+ *\r
+ * @param void\r
+ * @return instance\r
+ */\r
+l7vs::LoggerImpl& l7vs::LoggerImpl::getInstance()\r
+{\r
+ if (!instance) {\r
+ instance = new LoggerImpl;\r
+ }\r
+ return *instance;\r
+}\r
+\r
+//! static Logger instance pointer initialized by 0.\r
+l7vs::LoggerImpl* l7vs::LoggerImpl::instance = 0;\r
+\r
+/*!\r
+ * initialize function.\r
+ * logger initialized to use syslogappender and fileappender(/dev/console)\r
+ *\r
+ * @param void\r
+ * @retval true succeed\r
+ * @retval false failed\r
+ */\r
+bool l7vs::LoggerImpl::init()\r
+{\r
+ int ret = 0;\r
+ if (initialized) return false;\r
+\r
+ try {\r
+ log4cxx::LoggerPtr root = log4cxx::Logger::getRootLogger();\r
+ if (0 == root) {\r
+ return false;\r
+ }\r
+ log4cxx::LayoutPtr layout =\r
+ new log4cxx::PatternLayout(LOGGER_LAYOUT);\r
+ log4cxx::net::SyslogAppenderPtr syslogAppender =\r
+ new log4cxx::net::SyslogAppender(layout, log4cxx::net::SyslogAppender::getFacility(LOGGER_SYSLOG_FACILITY));\r
+ root->addAppender(syslogAppender);\r
+ log4cxx::WriterAppender* consoleAppender =\r
+ new log4cxx::ConsoleAppender( layout, log4cxx::ConsoleAppender::getSystemErr() );\r
+ root->addAppender(consoleAppender);\r
+\r
+ for (LOG_CATEGORY_TAG cat = LOG_CAT_NONE; cat < LOG_CAT_END; ++cat) {\r
+ log4cxx::Logger::getLogger(categoryTable[cat])->setLevel(categoryLevel[cat]);\r
+ }\r
+ }\r
+ catch (const std::exception& e) {\r
+ std::ostringstream oss;\r
+ oss << "Logger Initialization Failed : " << e.what();\r
+ errorConf(6, oss.str(), __FILE__, __LINE__);\r
+ return false;\r
+ }\r
+ \r
+ ret = gethostname(hostname, HOST_NAME_LEN);\r
+ if (0 > ret) {\r
+ if (LOG_LV_WARN >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogWarn(loggerCategory,1, "Fail to get Hostname", __FILE__, __LINE__);\r
+ }\r
+ } \r
+\r
+ if (LOG_LV_INFO >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogInfo(loggerCategory,1, "Logger Initialized.", __FILE__, __LINE__);\r
+ }\r
+\r
+ initialized = true;\r
+ return true;\r
+}\r
+\r
+/*!\r
+ * error handling function.\r
+ * if error occured, switch appenders to syslogappender and fileappender(/dev/console)\r
+ * message will output to syslog/fileappender appender\r
+ * \r
+ * @param log message id \r
+ * @param log message \r
+ * @param current file \r
+ * @param current line\r
+ * @return void\r
+ */\r
+void l7vs::LoggerImpl::errorConf(unsigned int message_id, const std::string& errorMessage, const char* file, int line)\r
+{\r
+ try {\r
+ log4cxx::LogManager::resetConfiguration();\r
+ log4cxx::LoggerPtr root = log4cxx::Logger::getRootLogger();\r
+ if (0 == root)\r
+ return;\r
+ log4cxx::LayoutPtr layout =\r
+ new log4cxx::PatternLayout(LOGGER_LAYOUT);\r
+ log4cxx::net::SyslogAppenderPtr syslogAppender =\r
+ new log4cxx::net::SyslogAppender(layout, log4cxx::net::SyslogAppender::getFacility(LOGGER_SYSLOG_FACILITY));\r
+ log4cxx::ConsoleAppender* consoleAppender = new log4cxx::ConsoleAppender(layout, log4cxx::ConsoleAppender::getSystemErr() );\r
+ root->addAppender(consoleAppender);\r
+ root->addAppender(syslogAppender);\r
+\r
+ for (LOG_CATEGORY_TAG cat = LOG_CAT_NONE; cat < LOG_CAT_END; ++cat) {\r
+ log4cxx::Logger::getLogger(categoryTable[cat])->setLevel(categoryLevel[cat]);\r
+ }\r
+\r
+ char buf[BUF_LEN];\r
+ snprintf(buf, BUF_LEN, "%s%d%03d%04d %s %s", LOGGER_PROCESS_ID, LOG_LV_FATAL, loggerCategory, message_id, errorMessage.c_str(), hostname);\r
+ log4cxx::Logger::getLogger(categoryTable[loggerCategory])->forcedLog(log4cxx::Level::getFatal(), buf, log4cxx::spi::LocationInfo(file, "", line));\r
+ }\r
+ catch (const std::exception& e) {\r
+ std::ostringstream oss;\r
+ oss << "Logger Error Output Failed : " << e.what() << "\n";\r
+ fputs(oss.str().c_str(), stderr);\r
+ }\r
+}\r
+\r
+/*!\r
+ * load the logger parameter.\r
+ * get settings from parameter component, and configure log4cxx property\r
+ *\r
+ * @param void\r
+ * @return void\r
+ */\r
+void l7vs::LoggerImpl::loadConf()\r
+{\r
+ for (LOG_CATEGORY_TAG cat = LOG_CAT_NONE; cat < LOG_CAT_END; ++cat) {\r
+ if (cat == LOG_CAT_SSLPROXY_CONNECTION) {\r
+ // Connection category Logger setting.\r
+ log_filename_key = LOGGER_CONN_LOG_FILENAME_KEY;\r
+ rotation_key = LOGGER_CONN_ROTATION_KEY;\r
+ max_backup_index_key = LOGGER_CONN_MAX_BACKUP_INDEX_KEY;\r
+ max_file_size_key = LOGGER_CONN_MAX_FILE_SIZE_KEY;\r
+ rotation_timing_key = LOGGER_CONN_ROTATION_TIMING_KEY;\r
+ rotation_timing_value_key = LOGGER_CONN_ROTATION_TIMING_VALUE_KEY;\r
+ /*-------- DEBUG LOG for sslproxy --------*/\r
+ if (LOG_LV_DEBUG >= this->getLogLevel(loggerCategory)) {\r
+ std::ostringstream oss;\r
+ oss << "function : void l7vs::LoggerImpl::loadConf() : "\r
+ << "Connection category Logger setting. "\r
+ << "cat = " << cat;\r
+ this->putLogDebug(loggerCategory, 1, oss.str(), __FILE__, __LINE__);\r
+ }\r
+ /*------ DEBUG LOG END for sslproxy ------*/\r
+ } else {\r
+ // Other category Logger setting.\r
+ log_filename_key = LOGGER_LOG_FILENAME_KEY;\r
+ rotation_key = LOGGER_ROTATION_KEY;\r
+ max_backup_index_key = LOGGER_MAX_BACKUP_INDEX_KEY;\r
+ max_file_size_key = LOGGER_MAX_FILE_SIZE_KEY;\r
+ rotation_timing_key = LOGGER_ROTATION_TIMING_KEY;\r
+ rotation_timing_value_key = LOGGER_ROTATION_TIMING_VALUE_KEY;\r
+ /*-------- DEBUG LOG for sslproxy --------*/\r
+ if (LOG_LV_DEBUG >= this->getLogLevel(loggerCategory) &&\r
+ cat != LOG_CAT_SSLPROXY_LOGGER) {\r
+ std::ostringstream oss;\r
+ oss << "function : void l7vs::LoggerImpl::loadConf() : "\r
+ << "Other category Logger setting. "\r
+ << "cat = " << cat;\r
+ this->putLogDebug(loggerCategory, 2, oss.str(), __FILE__, __LINE__);\r
+ }\r
+ /*------ DEBUG LOG END for sslproxy ------*/\r
+ }\r
+ loadCategoryLoggerConf(cat);\r
+ }\r
+ if (LOG_LV_INFO >= this->getLogLevel(loggerCategory)) {\r
+ std::ostringstream oss;\r
+ oss << "Logger Configuration Succeed.";\r
+ this->putLogInfo(loggerCategory,2, oss.str(), __FILE__, __LINE__);\r
+ }\r
+\r
+ /*-------- DEBUG LOG for sslproxy --------*/\r
+ if (LOG_LV_DEBUG >= this->getLogLevel(loggerCategory)) {\r
+ std::ostringstream oss;\r
+ oss << "out_function : void l7vs::LoggerImpl::loadConf() : "\r
+ << "loadCategoryLoggerConf() END.";\r
+ this->putLogDebug(loggerCategory, 3, oss.str(), __FILE__, __LINE__);\r
+ }\r
+ /*------ DEBUG LOG END for sslproxy ------*/\r
+}\r
+\r
+/*!\r
+ * load the category logger parameter.\r
+ * get settings from parameter component of each category, and configure log4cxx property\r
+ *\r
+ * @param[in] catnum LOG_CATEGORY_TAG\r
+ * @return void\r
+ */\r
+void l7vs::LoggerImpl::loadCategoryLoggerConf(LOG_CATEGORY_TAG catnum)\r
+{\r
+ std::string ret;\r
+\r
+ //get log filename\r
+ if (l7vs::Parameter::getInstance().isStringExist(PARAM_COMP_LOGGER, log_filename_key)) {\r
+ logFilename = l7vs::Parameter::getInstance().getStringValue(PARAM_COMP_LOGGER, log_filename_key);\r
+ }\r
+ else {\r
+ if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogError(loggerCategory,1, "Not Exist Log Filename Setting.", __FILE__, __LINE__);\r
+ }\r
+ throw std::logic_error("Not Exist Log Filename Setting.");\r
+ }\r
+ \r
+ //get rotation\r
+ if (l7vs::Parameter::getInstance().isStringExist(PARAM_COMP_LOGGER, rotation_key)) {\r
+ std::string rotationStr = l7vs::Parameter::getInstance().getStringValue(PARAM_COMP_LOGGER, rotation_key);\r
+ if ("size" == rotationStr) rotation = LOG_ROT_SIZE;\r
+ else if ("date" == rotationStr) rotation = LOG_ROT_DATE;\r
+ else if ("datesize" == rotationStr) rotation = LOG_ROT_DATESIZE;\r
+ else {\r
+ if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogError(loggerCategory,2, "Invalid Log Rotation Setting.", __FILE__, __LINE__);\r
+ }\r
+ throw std::logic_error("Invalid Log Rotation Setting.");\r
+ }\r
+ }\r
+ else {\r
+ if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogError(loggerCategory,3, "Not Exist Log Rotation Setting.", __FILE__, __LINE__);\r
+ }\r
+ throw std::logic_error("Not Exist Log Rotation Setting.");\r
+ }\r
+\r
+ //get max backup index\r
+ if (l7vs::Parameter::getInstance().isStringExist(PARAM_COMP_LOGGER, max_backup_index_key)) {\r
+ std::string maxBackupIndexStr = l7vs::Parameter::getInstance().getStringValue(PARAM_COMP_LOGGER, max_backup_index_key);\r
+ try {\r
+ maxBackupIndex = boost::lexical_cast<unsigned int>(maxBackupIndexStr);\r
+ }\r
+ catch (const boost::bad_lexical_cast& bc) {\r
+ if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogError(loggerCategory,4, "Invalid MaxBackupIndex Value.", __FILE__, __LINE__);\r
+ }\r
+ throw std::logic_error("Invalid MaxBackupIndex Value.");\r
+ }\r
+ if (LOGGER_BACKUP_INDEX_LOWER_LIMIT > maxBackupIndex) {\r
+ std::ostringstream oss;\r
+ oss << "Max Backup Index must at least " << LOGGER_BACKUP_INDEX_LOWER_LIMIT << ".";\r
+ if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogError(loggerCategory,5, oss.str(), __FILE__, __LINE__);\r
+ }\r
+ throw std::logic_error(oss.str());\r
+ } \r
+ if (LOGGER_BACKUP_INDEX_LIMIT < maxBackupIndex) {\r
+ std::ostringstream oss;\r
+ oss << "Max Backup Index must at most " << LOGGER_BACKUP_INDEX_LIMIT << ".";\r
+ if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogError(loggerCategory,6, oss.str(), __FILE__, __LINE__);\r
+ }\r
+ throw std::logic_error(oss.str());\r
+ } \r
+ }\r
+ else {\r
+ if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogError(loggerCategory,7, "Not Exist Log MaxBackupIndex Setting.", __FILE__, __LINE__);\r
+ }\r
+ throw std::logic_error("Not Exist Log MaxBackupIndex Setting.");\r
+ }\r
+\r
+ if (LOG_ROT_SIZE == rotation || LOG_ROT_DATESIZE == rotation) {\r
+ // get max file size\r
+ std::string maxFileSizeStr;\r
+ if (l7vs::Parameter::getInstance().isStringExist(PARAM_COMP_LOGGER, max_file_size_key)) {\r
+ maxFileSizeStr = l7vs::Parameter::getInstance().getStringValue(PARAM_COMP_LOGGER, max_file_size_key);\r
+ }\r
+ else {\r
+ if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogError(loggerCategory,8, "Not Exist Log MaxFileSize Setting.", __FILE__, __LINE__);\r
+ }\r
+ throw std::logic_error("Not Exist Log MaxFileSize Setting.");\r
+ }\r
+ \r
+ std::string size_val;\r
+ std::string last_str = maxFileSizeStr.substr(maxFileSizeStr.length() - 1, 1);\r
+ // when unit was specified\r
+ if (("K" == last_str) || ("M" == last_str) || ("G" == last_str)) {\r
+ size_val = maxFileSizeStr.substr(0, maxFileSizeStr.length() - 1);\r
+ }\r
+ else {\r
+ size_val = maxFileSizeStr;\r
+ }\r
+ \r
+ try {\r
+ maxFileSize = boost::lexical_cast<size_t>(size_val);\r
+ }\r
+ catch (const boost::bad_lexical_cast& bc) {\r
+ if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogError(loggerCategory,9, "Invalid FileSize Value.", __FILE__, __LINE__);\r
+ }\r
+ throw std::logic_error("Invalid FileSize Value.");\r
+ }\r
+\r
+ if ("K" == last_str) {\r
+ if ((ULLONG_MAX / 1024) < maxFileSize) {\r
+ if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogError(loggerCategory,10, "Invalid FileSize Value.", __FILE__, __LINE__);\r
+ }\r
+ throw std::logic_error("Invalid FileSize Value.");\r
+ }\r
+ maxFileSize = maxFileSize * 1024;\r
+ }\r
+ else if ("M" == last_str) {\r
+ if ((ULLONG_MAX / 1024 / 1024) < maxFileSize) {\r
+ if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogError(loggerCategory,11, "Invalid FileSize Value.", __FILE__, __LINE__);\r
+ }\r
+ throw std::logic_error("Invalid FileSize Value.");\r
+ }\r
+ maxFileSize = maxFileSize * 1024 * 1024;\r
+ }\r
+ else if ("G" == last_str) {\r
+ if ((ULLONG_MAX / 1024 / 1024 / 1024) < maxFileSize) {\r
+ if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogError(loggerCategory,12, "Invalid FileSize Value.", __FILE__, __LINE__);\r
+ }\r
+ throw std::logic_error("Invalid FileSize Value.");\r
+ }\r
+ maxFileSize = maxFileSize * 1024 * 1024 * 1024;\r
+ }\r
+ if (LOGGER_FILESIZE_LOWER_LIMIT > maxFileSize) {\r
+ int limit = LOGGER_FILESIZE_LOWER_LIMIT;\r
+ std::ostringstream oss;\r
+ oss << "FileSize must at least " << limit << " bytes.";\r
+ if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogError(loggerCategory,13, oss.str(), __FILE__, __LINE__);\r
+ }\r
+ throw std::logic_error(oss.str());\r
+ }\r
+ }\r
+\r
+ if (LOG_ROT_DATE == rotation || LOG_ROT_DATESIZE == rotation) {\r
+ // get rotation timing\r
+ if (l7vs::Parameter::getInstance().isStringExist(PARAM_COMP_LOGGER, rotation_timing_key)) {\r
+ std::string rotationTimingStr = l7vs::Parameter::getInstance().getStringValue(PARAM_COMP_LOGGER, rotation_timing_key);\r
+ if ("year" == rotationTimingStr) rotationTiming = LOG_TIM_YEAR;\r
+ else if ("month" == rotationTimingStr) rotationTiming = LOG_TIM_MONTH;\r
+ else if ("week" == rotationTimingStr) rotationTiming = LOG_TIM_WEEK;\r
+ else if ("date" == rotationTimingStr) rotationTiming = LOG_TIM_DATE;\r
+ else if ("hour" == rotationTimingStr) rotationTiming = LOG_TIM_HOUR;\r
+ else {\r
+ if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogError(loggerCategory,14, "Invalid Log RotationTiming Setting.", __FILE__, __LINE__);\r
+ }\r
+ throw std::logic_error("Invalid Log RotationTiming Setting.");\r
+ }\r
+ }\r
+ else {\r
+ if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogError(loggerCategory,15, "Not Exist Log RotaionTiming Setting.", __FILE__, __LINE__);\r
+ }\r
+ throw std::logic_error("Not Exist Log RotaionTiming Setting.");\r
+ }\r
+\r
+ if (LOG_TIM_YEAR == rotationTiming) {\r
+ if (l7vs::Parameter::getInstance().isStringExist(PARAM_COMP_LOGGER, rotation_timing_value_key)) {\r
+ ret = l7vs::Parameter::getInstance().getStringValue(PARAM_COMP_LOGGER, rotation_timing_value_key);\r
+\r
+ std::string::size_type fpos = 0;\r
+ std::string::size_type rpos = 0;\r
+ int month = 0;\r
+ int date = 0;\r
+ int hour = 0;\r
+ int minute = 0;\r
+ // find month\r
+ rpos = ret.find_first_of('/', fpos);\r
+ if (std::string::npos != rpos) {\r
+ std::string monthStr = ret.substr(fpos, rpos - fpos);\r
+ try {\r
+ month = boost::lexical_cast<int>(monthStr);\r
+ }\r
+ catch (const boost::bad_lexical_cast& bc) {\r
+ if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogError(loggerCategory,16, "Parse Timing Year Error.", __FILE__, __LINE__);\r
+ }\r
+ throw std::logic_error("Parse Timing Year Error.");\r
+ }\r
+ if (1 > month || month > 12) {\r
+ if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogError(loggerCategory,17, "Parse Timing Year Error.", __FILE__, __LINE__);\r
+ }\r
+ throw std::logic_error("Parse Timing Year Error.");\r
+ }\r
+ fpos = rpos + 1;\r
+ // find date\r
+ rpos = ret.find_first_of(' ', fpos);\r
+ if (std::string::npos != rpos) {\r
+ std::string dateStr = ret.substr(fpos, rpos - fpos);\r
+ try {\r
+ date = boost::lexical_cast<int>(dateStr);\r
+ }\r
+ catch (const boost::bad_lexical_cast& bc) {\r
+ if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogError(loggerCategory,18, "Parse Timing Year Error.", __FILE__, __LINE__);\r
+ }\r
+ throw std::logic_error("Parse Timing Year Error.");\r
+ }\r
+ if (1 > date || date > 31) {\r
+ if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogError(loggerCategory,19, "Parse Timing Year Error.", __FILE__, __LINE__);\r
+ }\r
+ throw std::logic_error("Parse Timing Year Error.");\r
+ }\r
+ int dates[] = {31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31};\r
+ if (date > dates[month - 1]) {\r
+ if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogError(loggerCategory,20, "Parse Timing Year Error.", __FILE__, __LINE__);\r
+ }\r
+ throw std::logic_error("Parse Timing Year Error.");\r
+ }\r
+ fpos = rpos + 1;\r
+ // find hour \r
+ rpos = ret.find_first_of(':', fpos);\r
+ if (std::string::npos != rpos) {\r
+ std::string hourStr = ret.substr(fpos, rpos - fpos);\r
+ try {\r
+ hour = boost::lexical_cast<int>(hourStr);\r
+ }\r
+ catch (const boost::bad_lexical_cast& bc) {\r
+ if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogError(loggerCategory,21, "Parse Timing Year Error.", __FILE__, __LINE__);\r
+ }\r
+ throw std::logic_error("Parse Timing Year Error.");\r
+ }\r
+ if (0 > hour || hour > 23) {\r
+ if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogError(loggerCategory,22, "Parse Timing Year Error.", __FILE__, __LINE__);\r
+ }\r
+ throw std::logic_error("Parse Timing Year Error.");\r
+ }\r
+ // minute\r
+ std::string minuteStr = ret.substr(rpos + 1);\r
+ try {\r
+ minute = boost::lexical_cast<int>(minuteStr);\r
+ }\r
+ catch (const boost::bad_lexical_cast& bc) {\r
+ if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogError(loggerCategory,23, "Parse Timing Year Error.", __FILE__, __LINE__);\r
+ }\r
+ throw std::logic_error("Parse Timing Year Error.");\r
+ }\r
+ if (0 > minute || minute > 59) {\r
+ if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogError(loggerCategory,24, "Parse Timing Year Error.", __FILE__, __LINE__);\r
+ }\r
+ throw std::logic_error("Parse Timing Year Error.");\r
+ }\r
+ }\r
+ else {\r
+ if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogError(loggerCategory,25, "Parse Timing Year Error.", __FILE__, __LINE__);\r
+ }\r
+ throw std::logic_error("Parse Timing Year Error.");\r
+ }\r
+ }\r
+ else {\r
+ if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) { \r
+ this->putLogError(loggerCategory,26, "Parse Timing Year Error.", __FILE__, __LINE__);\r
+ }\r
+ throw std::logic_error("Parse Timing Year Error.");\r
+ }\r
+ }\r
+ else {\r
+ if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogError(loggerCategory,27, "Parse Timing Year Error.", __FILE__, __LINE__);\r
+ }\r
+ throw std::logic_error("Parse Timing Year Error.");\r
+ }\r
+\r
+ // format to internal rotation timing value expresson\r
+ std::ostringstream oss;\r
+ oss << std::setfill('0') << std::setw(2) << month\r
+ << std::setfill('0') << std::setw(2) << date\r
+ << std::setfill('0') << std::setw(2) << hour\r
+ << std::setfill('0') << std::setw(2) << minute;\r
+ \r
+ rotationTimingValue = oss.str();\r
+\r
+ }\r
+ else {\r
+ if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogError(loggerCategory,28, "Not Exist Log RotaionTiming Year Setting.", __FILE__, __LINE__);\r
+ }\r
+ throw std::logic_error("Not Exist Log RotaionTiming Year Setting.");\r
+ }\r
+ }\r
+\r
+ if (LOG_TIM_MONTH == rotationTiming) {\r
+ if (l7vs::Parameter::getInstance().isStringExist(PARAM_COMP_LOGGER, rotation_timing_value_key)) {\r
+ ret = l7vs::Parameter::getInstance().getStringValue(PARAM_COMP_LOGGER, rotation_timing_value_key);\r
+\r
+ std::string::size_type fpos = 0;\r
+ std::string::size_type rpos = 0;\r
+ int date = 0;\r
+ int hour = 0;\r
+ int minute = 0;\r
+ // find day\r
+ rpos = ret.find_first_of(' ', fpos);\r
+ if (std::string::npos != rpos) {\r
+ std::string dateStr = ret.substr(fpos, rpos - fpos);\r
+ try {\r
+ date = boost::lexical_cast<int>(dateStr);\r
+ }\r
+ catch (const boost::bad_lexical_cast& bc) {\r
+ if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogError(loggerCategory,29, "Parse Timing Month Error.", __FILE__, __LINE__);\r
+ }\r
+ throw std::logic_error("Parse Timing Month Error.");\r
+ }\r
+ if (1 > date || date > 31) {\r
+ if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogError(loggerCategory,30, "Parse Timing Month Error.", __FILE__, __LINE__);\r
+ }\r
+ throw std::logic_error("Parse Timing Month Error.");\r
+ }\r
+ fpos = rpos + 1;\r
+ // find hour\r
+ rpos = ret.find_first_of(':', fpos);\r
+ if (std::string::npos != rpos) {\r
+ std::string hourStr = ret.substr(fpos, rpos - fpos);\r
+ try {\r
+ hour = boost::lexical_cast<int>(hourStr);\r
+ }\r
+ catch (const boost::bad_lexical_cast& bc) {\r
+ if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogError(loggerCategory,31, "Parse Timing Month Error.", __FILE__, __LINE__);\r
+ }\r
+ throw std::logic_error("Parse Timing Month Error.");\r
+ }\r
+ if (0 > hour || hour > 23) {\r
+ if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogError(loggerCategory,32, "Parse Timing Month Error.", __FILE__, __LINE__);\r
+ }\r
+ throw std::logic_error("Parse Timing Month Error.");\r
+ }\r
+ // minute\r
+ std::string minuteStr = ret.substr(rpos + 1);\r
+ try {\r
+ minute = boost::lexical_cast<int>(minuteStr);\r
+ }\r
+ catch (const boost::bad_lexical_cast& bc) {\r
+ if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogError(loggerCategory,33, "Parse Timing Month Error.", __FILE__, __LINE__);\r
+ }\r
+ throw std::logic_error("Parse Timing Month Error.");\r
+ }\r
+ if (0 > minute || minute > 59) {\r
+ if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogError(loggerCategory,34, "Parse Timing Month Error.", __FILE__, __LINE__);\r
+ }\r
+ throw std::logic_error("Parse Timing Month Error.");\r
+ }\r
+ }\r
+ else {\r
+ if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogError(loggerCategory,35, "Parse Timing Month Error.", __FILE__, __LINE__);\r
+ }\r
+ throw std::logic_error("Parse Timing Month Error.");\r
+ }\r
+ }\r
+ else {\r
+ if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogError(loggerCategory,36, "Parse Timing Month Error.", __FILE__, __LINE__);\r
+ }\r
+ throw std::logic_error("Parse Timing Month Error.");\r
+ }\r
+\r
+ // format to internal rotation timing value expresson\r
+ std::ostringstream oss;\r
+ oss << std::setfill('0') << std::setw(2) << date\r
+ << std::setfill('0') << std::setw(2) << hour\r
+ << std::setfill('0') << std::setw(2) << minute;\r
+ \r
+ rotationTimingValue = oss.str();\r
+\r
+ }\r
+ else {\r
+ if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogError(loggerCategory,37, "Not Exist Log RotaionTiming Month Setting.", __FILE__, __LINE__);\r
+ }\r
+ throw std::logic_error("Not Exist Log RotaionTiming Month Setting.");\r
+ }\r
+ }\r
+\r
+ if (LOG_TIM_WEEK == rotationTiming) {\r
+ if (l7vs::Parameter::getInstance().isStringExist(PARAM_COMP_LOGGER, rotation_timing_value_key)) {\r
+ ret = l7vs::Parameter::getInstance().getStringValue(PARAM_COMP_LOGGER, rotation_timing_value_key);\r
+\r
+ std::string::size_type fpos = 0;\r
+ std::string::size_type rpos = 0;\r
+ int week = 0;\r
+ int hour = 0;\r
+ int minute = 0;\r
+ rpos = ret.find_first_of(' ', fpos);\r
+ //find week\r
+ if (std::string::npos != rpos) {\r
+ std::string weekStr = ret.substr(fpos, rpos - fpos);\r
+\r
+ if ("sun" == weekStr) week = 0;\r
+ else if ("mon" == weekStr) week = 1;\r
+ else if ("tue" == weekStr) week = 2;\r
+ else if ("wed" == weekStr) week = 3;\r
+ else if ("thu" == weekStr) week = 4;\r
+ else if ("fri" == weekStr) week = 5;\r
+ else if ("sat" == weekStr) week = 6;\r
+ else {\r
+ if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogError(loggerCategory,38, "Parse Timing Week Error.", __FILE__, __LINE__);\r
+ }\r
+ throw std::logic_error("Parse Timing Week Error.");\r
+ }\r
+ fpos = rpos + 1;\r
+ // find hour\r
+ rpos = ret.find_first_of(':', fpos);\r
+ if (std::string::npos != rpos) {\r
+ std::string hourStr = ret.substr(fpos, rpos - fpos);\r
+ try {\r
+ hour = boost::lexical_cast<int>(hourStr);\r
+ }\r
+ catch (const boost::bad_lexical_cast& bc) {\r
+ if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogError(loggerCategory,39, "Parse Timing Week Error.", __FILE__, __LINE__);\r
+ }\r
+ throw std::logic_error("Parse Timing Week Error.");\r
+ }\r
+ if (0 > hour || hour > 23) {\r
+ if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogError(loggerCategory,40, "Parse Timing Week Error.", __FILE__, __LINE__);\r
+ }\r
+ throw std::logic_error("Parse Timing Week Error.");\r
+ }\r
+ // minute\r
+ std::string minuteStr = ret.substr(rpos + 1);\r
+ try {\r
+ minute = boost::lexical_cast<int>(minuteStr);\r
+ }\r
+ catch (const boost::bad_lexical_cast& bc) {\r
+ if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogError(loggerCategory,41, "Parse Timing Week Error.", __FILE__, __LINE__);\r
+ }\r
+ throw std::logic_error("Parse Timing Week Error.");\r
+ }\r
+ if (0 > minute || minute > 59) {\r
+ if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogError(loggerCategory,42, "Parse Timing Week Error.", __FILE__, __LINE__);\r
+ }\r
+ throw std::logic_error("Parse Timing Week Error.");\r
+ }\r
+ }\r
+ else {\r
+ if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) { \r
+ this->putLogError(loggerCategory,43, "Parse Timing Week Error.", __FILE__, __LINE__);\r
+ }\r
+ throw std::logic_error("Parse Timing Week Error.");\r
+ }\r
+ }\r
+ else {\r
+ if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogError(loggerCategory,44, "Parse Timing Week Error.", __FILE__, __LINE__);\r
+ }\r
+ throw std::logic_error("Parse Timing Week Error.");\r
+ }\r
+\r
+ // format to internal rotation timing value expresson\r
+ std::ostringstream oss;\r
+ oss << std::setfill('0') << std::setw(1) << week\r
+ << std::setfill('0') << std::setw(2) << hour\r
+ << std::setfill('0') << std::setw(2) << minute;\r
+ \r
+ rotationTimingValue = oss.str();\r
+\r
+ }\r
+ else {\r
+ if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogError(loggerCategory,45, "Not Exist Log RotaionTiming Week Setting.", __FILE__, __LINE__);\r
+ }\r
+ throw std::logic_error("Not Exist Log RotaionTiming Week Setting.");\r
+ }\r
+ }\r
+\r
+ if (LOG_TIM_DATE == rotationTiming) {\r
+ if (l7vs::Parameter::getInstance().isStringExist(PARAM_COMP_LOGGER, rotation_timing_value_key)) {\r
+ ret = l7vs::Parameter::getInstance().getStringValue(PARAM_COMP_LOGGER, rotation_timing_value_key);\r
+\r
+ std::string::size_type fpos = 0;\r
+ std::string::size_type rpos = 0;\r
+ int hour = 0;\r
+ int minute = 0;\r
+ //find time\r
+ rpos = ret.find_first_of(':', fpos);\r
+ if (std::string::npos != rpos) {\r
+ std::string hourStr = ret.substr(fpos, rpos - fpos);\r
+ try {\r
+ hour = boost::lexical_cast<int>(hourStr);\r
+ }\r
+ catch (const boost::bad_lexical_cast& bc) {\r
+ if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogError(loggerCategory,46, "Parse Timing Date Error.", __FILE__, __LINE__);\r
+ }\r
+ throw std::logic_error("Parse Timing Date Error.");\r
+ }\r
+ if (0 > hour || hour > 23) {\r
+ if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogError(loggerCategory,47, "Parse Timing Date Error.", __FILE__, __LINE__);\r
+ }\r
+ throw std::logic_error("Parse Timing Date Error.");\r
+ }\r
+ // minute\r
+ std::string minuteStr = ret.substr(rpos + 1);\r
+ try {\r
+ minute = boost::lexical_cast<int>(minuteStr);\r
+ }\r
+ catch (const boost::bad_lexical_cast& bc) {\r
+ if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogError(loggerCategory,48, "Parse Timing Date Error.", __FILE__, __LINE__);\r
+ }\r
+ throw std::logic_error("Parse Timing Date Error.");\r
+ }\r
+ if (0 > minute || minute > 59) {\r
+ if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogError(loggerCategory,49, "Parse Timing Date Error.", __FILE__, __LINE__);\r
+ }\r
+ throw std::logic_error("Parse Timing Date Error.");\r
+ }\r
+ }\r
+ else {\r
+ if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogError(loggerCategory,50, "Parse Timing Date Error.", __FILE__, __LINE__);\r
+ }\r
+ throw std::logic_error("Parse Timing Date Error.");\r
+ }\r
+\r
+ // format to internal rotation timing value expresson\r
+ std::ostringstream oss;\r
+ oss << std::setfill('0') << std::setw(2) << hour\r
+ << std::setfill('0') << std::setw(2) << minute;\r
+ \r
+ rotationTimingValue = oss.str();\r
+\r
+ }\r
+ else {\r
+ if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogError(loggerCategory,51, "Not Exist Log RotaionTiming Date Setting.", __FILE__, __LINE__);\r
+ }\r
+ throw std::logic_error("Not Exist Log RotaionTiming Date Setting.");\r
+ }\r
+ }\r
+\r
+ if (LOG_TIM_HOUR == rotationTiming) {\r
+ if (l7vs::Parameter::getInstance().isStringExist(PARAM_COMP_LOGGER, rotation_timing_value_key)) {\r
+ ret = l7vs::Parameter::getInstance().getStringValue(PARAM_COMP_LOGGER, rotation_timing_value_key);\r
+\r
+ // minute\r
+ int minute = 0;\r
+ try {\r
+ minute = boost::lexical_cast<int>(ret);\r
+ }\r
+ catch (const boost::bad_lexical_cast& bc) {\r
+ if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogError(loggerCategory,52, "Parse Timing Hour Error.", __FILE__, __LINE__);\r
+ }\r
+ throw std::logic_error("Parse Timing Hour Error.");\r
+ }\r
+ if (0 > minute || minute > 59) {\r
+ if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogError(loggerCategory,53, "Parse Timing Hour Error.", __FILE__, __LINE__);\r
+ }\r
+ throw std::logic_error("Parse Timing Hour Error.");\r
+ }\r
+\r
+ // format to internal rotation timing value expresson\r
+ std::ostringstream oss;\r
+ oss << std::setfill('0') << std::setw(2) << minute;\r
+ \r
+ rotationTimingValue = oss.str();\r
+\r
+ }\r
+ else {\r
+ if (LOG_LV_ERROR >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogError(loggerCategory,54, "Not Exist Log RotaionTiming Hour Setting.", __FILE__, __LINE__);\r
+ }\r
+ throw std::logic_error("Not Exist Log RotaionTiming Hour Setting.");\r
+ }\r
+ }\r
+ }\r
+\r
+ try {\r
+ /*-------- DEBUG LOG for sslproxy --------*/\r
+ if (LOG_LV_DEBUG >= this->getLogLevel(loggerCategory) &&\r
+ catnum != LOG_CAT_SSLPROXY_LOGGER) {\r
+ std::ostringstream oss;\r
+ oss << "function : void l7vs::LoggerImpl::loadCategoryLoggerConf("\r
+ << "LOG_CATEGORY_TAG catnum) : "\r
+ << "Set category Logger appender. "\r
+ << "catnum = " << catnum;\r
+ this->putLogDebug(loggerCategory, 4, oss.str(), __FILE__, __LINE__);\r
+ }\r
+ /*------ DEBUG LOG END for sslproxy ------*/\r
+\r
+ // reset current configuration\r
+ // when category is LOG_CAT_NONE (first category)\r
+ log4cxx::helpers::Pool pool;\r
+ if (catnum == LOG_CAT_NONE) {\r
+ /*-------- DEBUG LOG for sslproxy --------*/\r
+ if (LOG_LV_DEBUG >= this->getLogLevel(loggerCategory) &&\r
+ catnum != LOG_CAT_SSLPROXY_LOGGER) {\r
+ std::ostringstream oss;\r
+ oss << "function : l7vs::LoggerImpl::loadCategoryLoggerConf() : "\r
+ << "Reset all Logger configuration. "\r
+ << "catnum = " << catnum;\r
+ this->putLogDebug(loggerCategory, 5, oss.str(), __FILE__, __LINE__);\r
+ }\r
+ /*------ DEBUG LOG END for sslproxy ------*/\r
+ log4cxx::LogManager::resetConfiguration();\r
+ }\r
+ log4cxx::LoggerPtr catlogger = log4cxx::Logger::getLogger(categoryTable[catnum]);\r
+ if (0 == catlogger) {\r
+ throw std::logic_error("getLogger Failed.");\r
+ }\r
+ log4cxx::LayoutPtr layout =\r
+ new log4cxx::PatternLayout(LOGGER_LAYOUT);\r
+\r
+ switch (rotation) {\r
+ case LOG_ROT_SIZE:\r
+ {\r
+ // create FixedWindowRollingPolicy\r
+ log4cxx::rolling::FixedWindowRollingPolicyPtr fixedRollingPolicy =\r
+ new log4cxx::rolling::FixedWindowRollingPolicy();\r
+ \r
+ // setting minIndex\r
+ fixedRollingPolicy->setMinIndex(1);\r
+ \r
+ // setting maxIndex\r
+ fixedRollingPolicy->setMaxIndex(maxBackupIndex);\r
+\r
+ // setting FileNamePattern\r
+ std::ostringstream sizeFile;\r
+ sizeFile << logFilename << "." << LOGGER_FILE_PATTERN;\r
+ fixedRollingPolicy->setFileNamePattern(sizeFile.str());\r
+ \r
+ // create SizeBasedTriggeringPolicy\r
+ log4cxx::rolling::SizeBasedTriggeringPolicyPtr sizeTriggeringPolicy =\r
+ new log4cxx::rolling::SizeBasedTriggeringPolicy();\r
+\r
+ // setting maxFileSize\r
+ sizeTriggeringPolicy->setMaxFileSize(maxFileSize);\r
+ \r
+ // create RollingFileAppender\r
+ log4cxx::rolling::RollingFileAppenderPtr sizeAppender =\r
+ new log4cxx::rolling::RollingFileAppender();\r
+ \r
+ // set layout\r
+ sizeAppender->setLayout(layout);\r
+ \r
+ // set RollingPolicy\r
+ sizeAppender->setRollingPolicy(fixedRollingPolicy);\r
+ \r
+ // set TriggeringPolicy\r
+ sizeAppender->setTriggeringPolicy(sizeTriggeringPolicy);\r
+\r
+ // set Log Filename\r
+ sizeAppender->setFile(logFilename, true, false, LOGGER_DEFAULT_BUFFER_SIZE, pool);\r
+ \r
+ // activate appender options\r
+ sizeAppender->activateOptions(pool);\r
+ \r
+ // add size_base_appender to CategoryLogger\r
+ catlogger->addAppender(sizeAppender);\r
+\r
+ break;\r
+ }\r
+ case LOG_ROT_DATE:\r
+ {\r
+ // create StrictTimeBasedRollingPolicy\r
+ log4cxx::rolling::StrictTimeBasedRollingPolicyPtr strictRollingPolicy =\r
+ new log4cxx::rolling::StrictTimeBasedRollingPolicy();\r
+ \r
+ // setting minIndex\r
+ strictRollingPolicy->setMinIndex(1);\r
+ \r
+ // setting maxIndex\r
+ strictRollingPolicy->setMaxIndex(maxBackupIndex);\r
+\r
+ // setting FileNamePattern\r
+ std::ostringstream dateFile;\r
+ dateFile << logFilename << "." << LOGGER_FILE_PATTERN;\r
+ strictRollingPolicy->setFileNamePattern(dateFile.str());\r
+\r
+ // setting Rotation Timing\r
+ strictRollingPolicy->setRotationTiming(rotationTiming);\r
+ \r
+ // setting Rotation Timing Value\r
+ strictRollingPolicy->setRotationTimingValue(rotationTimingValue);\r
+ \r
+ //create RollingFileAppender\r
+ log4cxx::rolling::RollingFileAppenderPtr dateAppender =\r
+ new log4cxx::rolling::RollingFileAppender();\r
+ \r
+ // set layout\r
+ dateAppender->setLayout(layout);\r
+\r
+ // set RollingPolicy (TriggeringPolicy also included RollingPolicy)\r
+ dateAppender->setRollingPolicy(strictRollingPolicy);\r
+ \r
+ // set Log Filename\r
+ dateAppender->setFile(logFilename, true, false, LOGGER_DEFAULT_BUFFER_SIZE, pool);\r
+ \r
+ // activate appender options\r
+ dateAppender->activateOptions(pool);\r
+ \r
+ // add date_based_appender to CategoryLogger\r
+ catlogger->addAppender(dateAppender);\r
+\r
+ break;\r
+ }\r
+ default: //LOG_ROT_DATESIZE:\r
+ {\r
+ // create TimeAndSizeBasedRollingPolicy\r
+ log4cxx::rolling::TimeAndSizeBasedRollingPolicyPtr timeSizeRollingPolicy =\r
+ new log4cxx::rolling::TimeAndSizeBasedRollingPolicy();\r
+ \r
+ // setting minIndex\r
+ timeSizeRollingPolicy->setMinIndex(1);\r
+ \r
+ // setting maxIndex\r
+ timeSizeRollingPolicy->setMaxIndex(maxBackupIndex);\r
+\r
+ // setting FileNamePattern\r
+ std::ostringstream dateSizeFile;\r
+ dateSizeFile << logFilename << "." << LOGGER_FILE_PATTERN;\r
+ timeSizeRollingPolicy->setFileNamePattern(dateSizeFile.str());\r
+ \r
+ // setting Rotation Timing\r
+ timeSizeRollingPolicy->setRotationTiming(rotationTiming);\r
+ \r
+ // setting Rotation Timing Value\r
+ timeSizeRollingPolicy->setRotationTimingValue(rotationTimingValue);\r
+ \r
+ // setting MaxFileSize\r
+ timeSizeRollingPolicy->setMaxFileSize(maxFileSize);\r
+ \r
+ // create Rolling FileAppender\r
+ log4cxx::rolling::RollingFileAppenderPtr dateSizeAppender =\r
+ new log4cxx::rolling::RollingFileAppender();\r
+ \r
+ // set layout\r
+ dateSizeAppender->setLayout(layout);\r
+ \r
+ // set RollingPolicy (TriggeringPolicy also included RollingPolicy)\r
+ dateSizeAppender->setRollingPolicy(timeSizeRollingPolicy);\r
+ \r
+ // set Log Filename\r
+ dateSizeAppender->setFile(logFilename, true, false, LOGGER_DEFAULT_BUFFER_SIZE, pool);\r
+ \r
+ // activate appender options\r
+ dateSizeAppender->activateOptions(pool);\r
+ \r
+ // add time_and_size_based_appender to CategoryLogger\r
+ catlogger->addAppender(dateSizeAppender);\r
+ }\r
+ }\r
+\r
+ //set default log level\r
+ for (LOG_CATEGORY_TAG cat = LOG_CAT_NONE; cat < LOG_CAT_END; ++cat) {\r
+ log4cxx::Logger::getLogger(categoryTable[cat])->setLevel(categoryLevel[cat]);\r
+ }\r
+\r
+ //get category level\r
+ for (LOG_CATEGORY_TAG cat = LOG_CAT_NONE; cat < LOG_CAT_END; ++cat) {\r
+ if (cat == LOG_CAT_NONE) continue;\r
+ if (l7vs::Parameter::getInstance().isStringExist(PARAM_COMP_LOGGER, categoryTable[cat])) {\r
+ std::string levelStr = l7vs::Parameter::getInstance().getStringValue(PARAM_COMP_LOGGER, categoryTable[cat]);\r
+ if ("debug" == levelStr) {\r
+ categoryLevel[cat] = log4cxx::Level::getDebug();\r
+ log4cxx::Logger::getLogger(categoryTable[cat])->setLevel(categoryLevel[cat]);\r
+ }\r
+ else if ("info" == levelStr) {\r
+ categoryLevel[cat] = log4cxx::Level::getInfo();\r
+ log4cxx::Logger::getLogger(categoryTable[cat])->setLevel(categoryLevel[cat]);\r
+ }\r
+ else if ("warn" == levelStr) {\r
+ categoryLevel[cat] = log4cxx::Level::getWarn();\r
+ log4cxx::Logger::getLogger(categoryTable[cat])->setLevel(categoryLevel[cat]);\r
+ }\r
+ else if ("error" == levelStr) {\r
+ categoryLevel[cat] = log4cxx::Level::getError();\r
+ log4cxx::Logger::getLogger(categoryTable[cat])->setLevel(categoryLevel[cat]);\r
+ }\r
+ else if ("fatal" == levelStr) {\r
+ categoryLevel[cat] = log4cxx::Level::getFatal();\r
+ log4cxx::Logger::getLogger(categoryTable[cat])->setLevel(categoryLevel[cat]);\r
+ }\r
+ else {\r
+ std::ostringstream oss;\r
+ oss << "Invalid Log Category Setting : " << categoryTable[cat];\r
+ if (LOG_LV_WARN >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogWarn(loggerCategory,2, oss.str(), __FILE__, __LINE__);\r
+ }\r
+ categoryLevel[cat] = log4cxx::Level::getInfo();\r
+ log4cxx::Logger::getLogger(categoryTable[cat])->setLevel(categoryLevel[cat]);\r
+ }\r
+ }\r
+ else {\r
+ std::ostringstream oss;\r
+ oss << "Not Exist Log Category Setting : " << categoryTable[cat];\r
+ if (LOG_LV_WARN >= this->getLogLevel(loggerCategory)) {\r
+ this->putLogWarn(loggerCategory,3, oss.str(), __FILE__, __LINE__);\r
+ }\r
+ categoryLevel[cat] = log4cxx::Level::getInfo();\r
+ log4cxx::Logger::getLogger(categoryTable[cat])->setLevel(categoryLevel[cat]);\r
+ }\r
+ }\r
+ }\r
+ catch (const std::exception& e) {\r
+ std::ostringstream oss;\r
+ oss << "Logger Reload Config Failed : " << e.what();\r
+ errorConf(7, oss.str(), __FILE__, __LINE__);\r
+ throw std::logic_error(oss.str());\r
+ }\r
+\r
+ initLogLevelTable();\r
+}\r
+\r
+/*!\r
+ * initialize LogLevel table.\r
+ * initialize the LogLevel table.\r
+ *\r
+ * @param void\r
+ * @return void\r
+ */\r
+void l7vs::LoggerImpl::initLogLevelTable(void)\r
+{\r
+ int nCounter = 0;\r
+\r
+ for (;nCounter < LOGGER_CATEGORY_NUM; nCounter++) {\r
+ loglevel[nCounter] = LOG_LV_NONE;\r
+ }\r
+\r
+ return;\r
+}\r
-/*
- * @file logger_impl.h
- * @brief logger module implementation class.
- *
- * L7VSD: Linux Virtual Server for Layer7 Load Balancing
- * Copyright (C) 2008 NTT COMWARE Corporation.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation; either
- * version 2.1 of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this library; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- **********************************************************************/
-
-#ifndef __LOGGER_IMPL_H__
-#define __LOGGER_IMPL_H__
-
-#include <string>
-#include <map>
-#include <log4cxx/logger.h>
-#include <log4cxx/level.h>
-#include <log4cxx/net/syslogappender.h>
-#include <log4cxx/fileappender.h>
-#include <log4cxx/rollingfileappender.h>
-#include <log4cxx/patternlayout.h>
-#include "logger_enum.h"
-
-#define BUF_LEN (4096)
-#define LOGGER_LEVEL_NUM (6)
-#define LOGGER_CATEGORY_NUM (40)
-
-#if !defined(LOGGER_PROCESS_VSD) && !defined(LOGGER_PROCESS_ADM) && !defined(LOGGER_PROCESS_SNM)
-#define LOGGER_PROCESS_VSD
-#endif
-
-#if defined(LOGGER_PROCESS_VSD)
-#define LOGGER_PROCESS_ID "VSD"
-#elif defined(LOGGER_PROCESS_ADM)
-#define LOGGER_PROCESS_ID "ADM"
-#else
-#define LOGGER_PROCESS_ID "SNM"
-#endif
-
-#if defined(LOGGER_PROCESS_VSD)
-#include "l7vs_snmpbridge.h"
-#endif
-
-#define LOGGER_NULL "/dev/null"
-
-#define HOST_NAME_LEN (256)
-
-namespace log4cxx
-{
- typedef helpers::ObjectPtrT<RollingFileAppender> RollingFileAppenderPtr;
-}
-
-namespace l7vs
-{
- /*!
- * Logger implement class.
- * operate log4cxx library.
- * this is singleton class.
- */
- class LoggerImpl
- {
- public:
- //! returns current instance.
- static LoggerImpl& getInstance();
- protected:
- //! default constructor initialize member variables.
- LoggerImpl() : initialized(false), logFilename(""), rotation(LOG_ROT_SIZE), maxBackupIndex(0), maxFileSize(0), rotationTiming(LOG_TIM_YEAR), rotationTimingValue("")
- {
- levelTable[LOG_LV_NONE] = log4cxx::Level::getDebug();
- levelTable[LOG_LV_DEBUG] = log4cxx::Level::getDebug();
- levelTable[LOG_LV_INFO] = log4cxx::Level::getInfo();
- levelTable[LOG_LV_WARN] = log4cxx::Level::getWarn();
- levelTable[LOG_LV_ERROR] = log4cxx::Level::getError();
- levelTable[LOG_LV_FATAL] = log4cxx::Level::getFatal();
-#if defined(LOGGER_PROCESS_VSD)
- loggerCategory = LOG_CAT_L7VSD_LOGGER;
- loggerProcess = LOG_MOD_L7VSD;
- //set default log level
- for (LOG_CATEGORY_TAG cat = LOG_CAT_NONE; cat <= getCategoryRangeEnd(LOG_MOD_SNMPAGENT); ++cat) {
- categoryLevel[cat] = log4cxx::Level::getError();
- }
-#elif defined(LOGGER_PROCESS_ADM)
- loggerCategory = LOG_CAT_L7VSADM_LOGGER;
- loggerProcess = LOG_MOD_L7VSADM;
- //set default log level
- for (LOG_CATEGORY_TAG cat = LOG_CAT_NONE; cat <= getCategoryRangeEnd(LOG_MOD_SNMPAGENT); ++cat) {
- categoryLevel[cat] = log4cxx::Level::getError();
- }
-#else //LOGGER_PROCESS_SNM
- loggerCategory = LOG_CAT_SNMPAGENT_LOGGER;
- loggerProcess = LOG_MOD_SNMPAGENT;
- //set default log level
- for (LOG_CATEGORY_TAG cat = LOG_CAT_NONE; cat <= getCategoryRangeEnd(LOG_MOD_SNMPAGENT); ++cat) {
- categoryLevel[cat] = log4cxx::Level::getError();
- }
-#endif
- }
- //! cpoy constructor disable
- LoggerImpl( const LoggerImpl& );
- //! operator= disable
- LoggerImpl& operator=( const LoggerImpl& );
- //! destructor.
- virtual ~LoggerImpl() {}
- //! static Logger instance
- static LoggerImpl* instance;
- //! initialized flag
- bool initialized;
- //! logger category
- LOG_CATEGORY_TAG loggerCategory;
- //! logger process
- LOG_MODULE_TAG loggerProcess;
- //! hostname
- char hostname[HOST_NAME_LEN];
-
- //! if error occured, switch appenders to syslogappender and fileappender(/dev/console)
- virtual void errorConf(unsigned int messageId, const std::string& errorMessage, const char* file, int line);
-
- //! base logFileanme
- std::string logFilename;
- //! rotation way (size base, date base, or both size and date base)
- LOG_ROTATION_TAG rotation;
- //! number of backup log file
- unsigned int maxBackupIndex;
- //! max size of log file
- unsigned long long maxFileSize;
- /*!
- * rotation timing
- * "year" = yearly
- * "monthr" = monthly
- * "week" = weekly
- * "date" = daily
- * "hour" = hourly
- */
- LOG_ROTATION_TIMING_TAG rotationTiming;
- /*!
- * rotation timing value
- *
- * rotation timing value
- * -------------------------------------------------
- * year "03051500" (3/5 15:00)
- * month "051100" (5 11:00)
- * week "12000" (mon 20:00) sun = 0, sat = 6
- * date "1500" (15:00)
- * hour "45" (45)
- */
- std::string rotationTimingValue;
-
- //! for transration between log4cxx::LevelPtr and LOGER_LEVEL_TAG
- static log4cxx::LevelPtr levelTable[LOGGER_LEVEL_NUM];
- //! for transration between string and LOGGER_CATEGORY_TAG
- static char categoryTable[][LOGGER_CATEGORY_NUM];
- //! holds category-loglevel
- log4cxx::LevelPtr categoryLevel[LOGGER_CATEGORY_NUM];
-
- //! LOG_LEVEL_TAG to log4cxx::LevelPtr transrator
- virtual inline const log4cxx::LevelPtr toLevel(LOG_LEVEL_TAG level)
- {
- return levelTable[level];
- }
- //! log4cxx::LevelPtr to LOG_LEVEL_TAG transrator
- virtual inline LOG_LEVEL_TAG toLevelTag(const log4cxx::LevelPtr level)
- {
- int levelInt = level->toInt();
- switch (levelInt) {
- case log4cxx::Level::DEBUG_INT:
- return LOG_LV_DEBUG;
- case log4cxx::Level::INFO_INT:
- return LOG_LV_INFO;
- case log4cxx::Level::WARN_INT:
- return LOG_LV_WARN;
- case log4cxx::Level::ERROR_INT:
- return LOG_LV_ERROR;
- case log4cxx::Level::FATAL_INT:
- return LOG_LV_FATAL;
- default:
- return LOG_LV_DEBUG;
- }
- }
- private:
- //! loglevel tagle
- LOG_LEVEL_TAG loglevel[LOGGER_CATEGORY_NUM];
-
- public:
- //! initialze function
- virtual bool init();
- //! Configuration function
- virtual void loadConf();
- //1 initialize loglevel table
- void initLogLevelTable();
-
- /*!
- * retrieve category's log level.
- *
- * @param category that want to know
- * @return log level
- */
- virtual inline LOG_LEVEL_TAG getLogLevel(LOG_CATEGORY_TAG cat)
- {
-#if defined(LOGGER_PROCESS_VSD)
- if (cat >= getCategoryRangeStart(LOG_MOD_SNMPAGENT) && cat <= getCategoryRangeEnd(LOG_MOD_SNMPAGENT)) {
- return l7vs_snmpbridge_get_loglevel(cat);
- }
-#endif
- if (LOG_LV_NONE == loglevel[cat]) {
- this->loglevel[cat] = toLevelTag(log4cxx::Logger::getLogger(categoryTable[cat])->getLevel());
- }
-
- return loglevel[cat];
- //return toLevelTag(log4cxx::Logger::getLogger(categoryTable[cat])->getLevel());
- }
-
- /*!
- * set category's log level.
- *
- * @param category to set log level
- * @param level
- * @retval true succeed
- * @retval false failed
- */
- virtual inline bool setLogLevel(LOG_CATEGORY_TAG cat, LOG_LEVEL_TAG level)
- {
- try {
-#if defined(LOGGER_PROCESS_VSD)
- if (cat >= getCategoryRangeStart(LOG_MOD_SNMPAGENT) && cat <= getCategoryRangeEnd(LOG_MOD_SNMPAGENT)) {
- l7vs_snmpbridge_change_loglevel(cat, level);
- }
-#endif
- log4cxx::Logger::getLogger(categoryTable[cat])->setLevel(toLevel(level));
- }
- catch (const std::exception& ex) {
- return false;
- }
-
- loglevel[cat] = level;
- return true;
- }
-
- /*!
- * output fatal log.
- *
- * @param category that logging matter occured
- * @param log message id
- * @param log message
- * @param current file
- * @param current line
- * @retrun void
- */
- virtual inline void putLogFatal(LOG_CATEGORY_TAG cat, const unsigned int message_id, const std::string& message, const char *file, int line)
- {
- char buf[BUF_LEN];
- snprintf(buf, BUF_LEN, "%s%d%03d%04d %s %s", LOGGER_PROCESS_ID, LOG_LV_FATAL, cat, message_id, message.c_str(), hostname);
- try {
- log4cxx::Logger::getLogger(categoryTable[cat])->forcedLog(log4cxx::Level::getFatal(), buf, log4cxx::spi::LocationInfo(file, "", line));
- }
- catch (const std::exception& ex) {
- std::ostringstream oss;
- oss << "Logging Error (Fatal Log) : " << ex.what();
- errorConf(1, oss.str(), __FILE__, __LINE__);
- }
- }
- /*!
- * output error log.
- *
- * @param category that logging matter occured
- * @param log message id
- * @param log message
- * @param current file
- * @param current line
- * @retrun void
- */
- //! output fatal log.
- virtual inline void putLogError(LOG_CATEGORY_TAG cat, const unsigned int message_id, const std::string& message, const char *file, int line)
- {
- char buf[BUF_LEN];
- snprintf(buf, BUF_LEN, "%s%d%03d%04d %s %s", LOGGER_PROCESS_ID, LOG_LV_ERROR, cat, message_id, message.c_str(), hostname);
- try {
- log4cxx::Logger::getLogger(categoryTable[cat])->forcedLog(log4cxx::Level::getError(), buf, log4cxx::spi::LocationInfo(file, "", line));
- }
- catch (const std::exception& ex) {
- std::ostringstream oss;
- oss << "Logging Error (Error Log) : " << ex.what();
- errorConf(2, oss.str(), __FILE__, __LINE__);
- }
- }
- /*!
- * output warn log.
- *
- * @param category that logging matter occured
- * @param log message id
- * @param log message
- * @param current file
- * @param current line
- * @retrun void
- */
- //! output fatal log.
- virtual inline void putLogWarn(LOG_CATEGORY_TAG cat, const unsigned int message_id, const std::string& message, const char *file, int line)
- {
- char buf[BUF_LEN];
- snprintf(buf, BUF_LEN, "%s%d%03d%04d %s %s", LOGGER_PROCESS_ID, LOG_LV_WARN, cat, message_id, message.c_str(), hostname);
- try {
- log4cxx::Logger::getLogger(categoryTable[cat])->forcedLog(log4cxx::Level::getWarn(), buf, log4cxx::spi::LocationInfo(file, "", line));
- }
- catch (const std::exception& ex) {
- std::ostringstream oss;
- oss << "Logging Error (Warn Log) : " << ex.what();
- errorConf(3, oss.str(), __FILE__, __LINE__);
- }
- }
- /*!
- * output info log.
- *
- * @param category that logging matter occured
- * @param log message id
- * @param log message
- * @param current file
- * @param current line
- * @retrun void
- */
- //! output fatal log.
- virtual inline void putLogInfo(LOG_CATEGORY_TAG cat, const unsigned int message_id, const std::string& message, const char *file, int line)
- {
- char buf[BUF_LEN];
- snprintf(buf, BUF_LEN, "%s%d%03d%04d %s %s", LOGGER_PROCESS_ID, LOG_LV_INFO, cat, message_id, message.c_str(), hostname);
- try {
- log4cxx::Logger::getLogger(categoryTable[cat])->forcedLog(log4cxx::Level::getInfo(), buf, log4cxx::spi::LocationInfo(file, "", line));
- }
- catch (const std::exception& ex) {
- std::ostringstream oss;
- oss << "Logging Error (Info Log) : " << ex.what();
- errorConf(4, oss.str(), __FILE__, __LINE__);
- }
- }
- /*!
- * output debug log.
- *
- * @param category that logging matter occured
- * @param log message id
- * @param log message
- * @param current file
- * @param current line
- * @retrun void
- */
- virtual inline void putLogDebug(LOG_CATEGORY_TAG cat, const unsigned int message_id, const std::string& message, const char *file, int line)
- {
- char buf[BUF_LEN];
- snprintf(buf, BUF_LEN, "%s%d%03d%04d %s %s", LOGGER_PROCESS_ID, LOG_LV_DEBUG, cat, message_id, message.c_str(), hostname);
- try {
- log4cxx::Logger::getLogger(categoryTable[cat])->forcedLog(log4cxx::Level::getDebug(), buf, log4cxx::spi::LocationInfo(file, "", line));
- }
- catch (const std::exception& ex) {
- std::ostringstream oss;
- oss << "Logging Error (Debug Log) : " << ex.what();
- errorConf(5, oss.str(), __FILE__, __LINE__);
- }
- }
-
- /*!
- * return start category by using module.
- *
- * @param module
- * @retrun start category
- */
- virtual inline LOG_CATEGORY_TAG getCategoryRangeStart(LOG_MODULE_TAG mod)
- {
- switch (mod) {
- case LOG_MOD_L7VSADM: return LOG_CAT_L7VSADM_PARSE;
- case LOG_MOD_SNMPAGENT: return LOG_CAT_SNMPAGENT_START_STOP;
- default: return LOG_CAT_L7VSD_NETWORK;
- }
- }
- /*!
- * return end category by using module.
- *
- * @param module
- * @retrun end category
- */
- virtual inline LOG_CATEGORY_TAG getCategoryRangeEnd(LOG_MODULE_TAG mod)
- {
- switch (mod) {
- case LOG_MOD_L7VSADM: return LOG_CAT_L7VSADM_MODULE;
- case LOG_MOD_SNMPAGENT: return LOG_CAT_SNMPAGENT_PARAMETER;
- default: return LOG_CAT_L7VSD_MODULE;
- }
- }
- };
-} //namespace l7vs
-#endif //__LOGGER_IMPL_H__
+/*\r
+ * @file logger_impl.h\r
+ * @brief logger module implementation class.\r
+ *\r
+ * L7VSD: Linux Virtual Server for Layer7 Load Balancing\r
+ * Copyright (C) 2008 NTT COMWARE Corporation.\r
+ *\r
+ * This program is free software; you can redistribute it and/or\r
+ * modify it under the terms of the GNU Lesser General Public\r
+ * License as published by the Free Software Foundation; either\r
+ * version 2.1 of the License, or (at your option) any later version.\r
+ *\r
+ * This program is distributed in the hope that it will be useful,\r
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of\r
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU\r
+ * Lesser General Public License for more details.\r
+ * \r
+ * You should have received a copy of the GNU Lesser General Public\r
+ * License along with this library; if not, write to the Free Software\r
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA\r
+ * 02110-1301 USA\r
+ *\r
+ **********************************************************************/\r
+\r
+#ifndef __LOGGER_IMPL_H__\r
+#define __LOGGER_IMPL_H__\r
+\r
+#include <string>\r
+#include <map>\r
+#include <log4cxx/logger.h>\r
+#include <log4cxx/level.h>\r
+#include <log4cxx/net/syslogappender.h>\r
+#include <log4cxx/fileappender.h>\r
+#include <log4cxx/rollingfileappender.h>\r
+#include <log4cxx/patternlayout.h>\r
+#include "logger_enum.h"\r
+\r
+#define BUF_LEN (4096)\r
+#define LOGGER_LEVEL_NUM (6)\r
+#define LOGGER_CATEGORY_NUM (40)\r
+\r
+#define LOGGER_PROCESS_ID "SLP"\r
+\r
+#define LOGGER_NULL "/dev/null"\r
+\r
+#define HOST_NAME_LEN (256)\r
+\r
+namespace log4cxx\r
+{\r
+ typedef helpers::ObjectPtrT<RollingFileAppender> RollingFileAppenderPtr;\r
+}\r
+\r
+namespace l7vs\r
+{\r
+ /*!\r
+ * Logger implement class.\r
+ * operate log4cxx library. \r
+ * this is singleton class. \r
+ */\r
+ class LoggerImpl\r
+ {\r
+ public:\r
+ //! returns current instance.\r
+ static LoggerImpl& getInstance();\r
+ protected:\r
+ //! default constructor initialize member variables.\r
+ LoggerImpl() : initialized(false), logFilename(""), rotation(LOG_ROT_SIZE), maxBackupIndex(0), maxFileSize(0), rotationTiming(LOG_TIM_YEAR), rotationTimingValue("")\r
+ {\r
+ levelTable[LOG_LV_NONE] = log4cxx::Level::getDebug();\r
+ levelTable[LOG_LV_DEBUG] = log4cxx::Level::getDebug();\r
+ levelTable[LOG_LV_INFO] = log4cxx::Level::getInfo();\r
+ levelTable[LOG_LV_WARN] = log4cxx::Level::getWarn();\r
+ levelTable[LOG_LV_ERROR] = log4cxx::Level::getError();\r
+ levelTable[LOG_LV_FATAL] = log4cxx::Level::getFatal();\r
+\r
+ loggerCategory = LOG_CAT_SSLPROXY_LOGGER;\r
+ //set default log level\r
+ for (LOG_CATEGORY_TAG cat = LOG_CAT_NONE; cat < LOG_CAT_END; ++cat) {\r
+ categoryLevel[cat] = log4cxx::Level::getError();\r
+ }\r
+ }\r
+ //! cpoy constructor disable\r
+ LoggerImpl( const LoggerImpl& );\r
+ //! operator= disable\r
+ LoggerImpl& operator=( const LoggerImpl& );\r
+ //! destructor.\r
+ virtual ~LoggerImpl() {}\r
+ //! static Logger instance\r
+ static LoggerImpl* instance;\r
+ //! initialized flag\r
+ bool initialized;\r
+ //! logger category\r
+ LOG_CATEGORY_TAG loggerCategory;\r
+ //! hostname\r
+ char hostname[HOST_NAME_LEN];\r
+\r
+ //! if error occured, switch appenders to syslogappender and fileappender(/dev/console)\r
+ virtual void errorConf(unsigned int messageId, const std::string& errorMessage, const char* file, int line);\r
+\r
+ //! base logFileanme\r
+ std::string logFilename;\r
+ //! rotation way (size base, date base, or both size and date base)\r
+ LOG_ROTATION_TAG rotation;\r
+ //! number of backup log file\r
+ unsigned int maxBackupIndex;\r
+ //! max size of log file\r
+ unsigned long long maxFileSize;\r
+ /*!\r
+ * rotation timing\r
+ * "year" = yearly\r
+ * "monthr" = monthly\r
+ * "week" = weekly\r
+ * "date" = daily\r
+ * "hour" = hourly\r
+ */\r
+ LOG_ROTATION_TIMING_TAG rotationTiming;\r
+ /*!\r
+ * rotation timing value \r
+ *\r
+ * rotation timing value\r
+ * -------------------------------------------------\r
+ * year "03051500" (3/5 15:00)\r
+ * month "051100" (5 11:00)\r
+ * week "12000" (mon 20:00) sun = 0, sat = 6\r
+ * date "1500" (15:00)\r
+ * hour "45" (45)\r
+ */\r
+ std::string rotationTimingValue;\r
+\r
+ //! key strings for logger\r
+ std::string log_filename_key;\r
+ std::string rotation_key;\r
+ std::string max_backup_index_key;\r
+ std::string max_file_size_key;\r
+ std::string rotation_timing_key;\r
+ std::string rotation_timing_value_key;\r
+\r
+\r
+ //! for transration between log4cxx::LevelPtr and LOGER_LEVEL_TAG\r
+ static log4cxx::LevelPtr levelTable[LOGGER_LEVEL_NUM];\r
+ //! for transration between string and LOGGER_CATEGORY_TAG\r
+ static char categoryTable[][LOGGER_CATEGORY_NUM];\r
+ //! holds category-loglevel\r
+ log4cxx::LevelPtr categoryLevel[LOGGER_CATEGORY_NUM];\r
+ \r
+ //! LOG_LEVEL_TAG to log4cxx::LevelPtr transrator\r
+ virtual inline const log4cxx::LevelPtr toLevel(LOG_LEVEL_TAG level)\r
+ {\r
+ return levelTable[level];\r
+ }\r
+ //! log4cxx::LevelPtr to LOG_LEVEL_TAG transrator\r
+ virtual inline LOG_LEVEL_TAG toLevelTag(const log4cxx::LevelPtr level)\r
+ {\r
+ int levelInt = level->toInt();\r
+ switch (levelInt) {\r
+ case log4cxx::Level::DEBUG_INT:\r
+ return LOG_LV_DEBUG;\r
+ case log4cxx::Level::INFO_INT:\r
+ return LOG_LV_INFO;\r
+ case log4cxx::Level::WARN_INT:\r
+ return LOG_LV_WARN;\r
+ case log4cxx::Level::ERROR_INT:\r
+ return LOG_LV_ERROR;\r
+ case log4cxx::Level::FATAL_INT:\r
+ return LOG_LV_FATAL;\r
+ default: \r
+ return LOG_LV_DEBUG;\r
+ }\r
+ }\r
+ private:\r
+ //! loglevel tagle\r
+ LOG_LEVEL_TAG loglevel[LOGGER_CATEGORY_NUM];\r
+\r
+ public:\r
+ //! initialze function\r
+ virtual bool init();\r
+ //! Configuration function\r
+ virtual void loadConf();\r
+ //! Category logger configuration function\r
+ virtual void loadCategoryLoggerConf(LOG_CATEGORY_TAG cat);\r
+ //1 initialize loglevel table\r
+ void initLogLevelTable();\r
+\r
+ /*!\r
+ * retrieve category's log level.\r
+ *\r
+ * @param category that want to know\r
+ * @return log level\r
+ */\r
+ virtual inline LOG_LEVEL_TAG getLogLevel(LOG_CATEGORY_TAG cat)\r
+ {\r
+ if (LOG_LV_NONE == loglevel[cat]) {\r
+ this->loglevel[cat] = toLevelTag(log4cxx::Logger::getLogger(categoryTable[cat])->getLevel());\r
+ }\r
+\r
+ return loglevel[cat];\r
+ }\r
+\r
+ /*!\r
+ * set category's log level.\r
+ *\r
+ * @param category to set log level\r
+ * @param level\r
+ * @retval true succeed\r
+ * @retval false failed\r
+ */\r
+ virtual inline bool setLogLevel(LOG_CATEGORY_TAG cat, LOG_LEVEL_TAG level)\r
+ {\r
+ try {\r
+ log4cxx::Logger::getLogger(categoryTable[cat])->setLevel(toLevel(level));\r
+ }\r
+ catch (const std::exception& ex) {\r
+ return false; \r
+ }\r
+\r
+ loglevel[cat] = level;\r
+ return true;\r
+ }\r
+\r
+ /*!\r
+ * output fatal log.\r
+ *\r
+ * @param category that logging matter occured\r
+ * @param log message id \r
+ * @param log message \r
+ * @param current file \r
+ * @param current line\r
+ * @retrun void\r
+ */\r
+ virtual inline void putLogFatal(LOG_CATEGORY_TAG cat, const unsigned int message_id, const std::string& message, const char *file, int line)\r
+ {\r
+ char buf[BUF_LEN];\r
+ snprintf(buf, BUF_LEN, "%s%d%03d%04d %s %s", LOGGER_PROCESS_ID, LOG_LV_FATAL, cat, message_id, message.c_str(), hostname);\r
+ try {\r
+ log4cxx::Logger::getLogger(categoryTable[cat])->forcedLog(log4cxx::Level::getFatal(), buf, log4cxx::spi::LocationInfo(file, "", line));\r
+ }\r
+ catch (const std::exception& ex) {\r
+ std::ostringstream oss;\r
+ oss << "Logging Error (Fatal Log) : " << ex.what();\r
+ errorConf(1, oss.str(), __FILE__, __LINE__);\r
+ }\r
+ }\r
+ /*!\r
+ * output error log.\r
+ *\r
+ * @param category that logging matter occured\r
+ * @param log message id \r
+ * @param log message \r
+ * @param current file \r
+ * @param current line\r
+ * @retrun void\r
+ */\r
+ //! output fatal log.\r
+ virtual inline void putLogError(LOG_CATEGORY_TAG cat, const unsigned int message_id, const std::string& message, const char *file, int line)\r
+ {\r
+ char buf[BUF_LEN];\r
+ snprintf(buf, BUF_LEN, "%s%d%03d%04d %s %s", LOGGER_PROCESS_ID, LOG_LV_ERROR, cat, message_id, message.c_str(), hostname);\r
+ try {\r
+ log4cxx::Logger::getLogger(categoryTable[cat])->forcedLog(log4cxx::Level::getError(), buf, log4cxx::spi::LocationInfo(file, "", line));\r
+ }\r
+ catch (const std::exception& ex) {\r
+ std::ostringstream oss;\r
+ oss << "Logging Error (Error Log) : " << ex.what();\r
+ errorConf(2, oss.str(), __FILE__, __LINE__);\r
+ }\r
+ }\r
+ /*!\r
+ * output warn log.\r
+ *\r
+ * @param category that logging matter occured\r
+ * @param log message id \r
+ * @param log message \r
+ * @param current file \r
+ * @param current line\r
+ * @retrun void\r
+ */\r
+ //! output fatal log.\r
+ virtual inline void putLogWarn(LOG_CATEGORY_TAG cat, const unsigned int message_id, const std::string& message, const char *file, int line)\r
+ {\r
+ char buf[BUF_LEN];\r
+ snprintf(buf, BUF_LEN, "%s%d%03d%04d %s %s", LOGGER_PROCESS_ID, LOG_LV_WARN, cat, message_id, message.c_str(), hostname);\r
+ try {\r
+ log4cxx::Logger::getLogger(categoryTable[cat])->forcedLog(log4cxx::Level::getWarn(), buf, log4cxx::spi::LocationInfo(file, "", line));\r
+ }\r
+ catch (const std::exception& ex) {\r
+ std::ostringstream oss;\r
+ oss << "Logging Error (Warn Log) : " << ex.what();\r
+ errorConf(3, oss.str(), __FILE__, __LINE__);\r
+ }\r
+ }\r
+ /*!\r
+ * output info log.\r
+ *\r
+ * @param category that logging matter occured\r
+ * @param log message id \r
+ * @param log message \r
+ * @param current file \r
+ * @param current line\r
+ * @retrun void\r
+ */\r
+ //! output fatal log.\r
+ virtual inline void putLogInfo(LOG_CATEGORY_TAG cat, const unsigned int message_id, const std::string& message, const char *file, int line)\r
+ {\r
+ char buf[BUF_LEN];\r
+ snprintf(buf, BUF_LEN, "%s%d%03d%04d %s %s", LOGGER_PROCESS_ID, LOG_LV_INFO, cat, message_id, message.c_str(), hostname);\r
+ try {\r
+ log4cxx::Logger::getLogger(categoryTable[cat])->forcedLog(log4cxx::Level::getInfo(), buf, log4cxx::spi::LocationInfo(file, "", line));\r
+ }\r
+ catch (const std::exception& ex) {\r
+ std::ostringstream oss;\r
+ oss << "Logging Error (Info Log) : " << ex.what();\r
+ errorConf(4, oss.str(), __FILE__, __LINE__);\r
+ }\r
+ }\r
+ /*!\r
+ * output debug log.\r
+ *\r
+ * @param category that logging matter occured\r
+ * @param log message id \r
+ * @param log message \r
+ * @param current file \r
+ * @param current line\r
+ * @retrun void\r
+ */\r
+ virtual inline void putLogDebug(LOG_CATEGORY_TAG cat, const unsigned int message_id, const std::string& message, const char *file, int line)\r
+ {\r
+ char buf[BUF_LEN];\r
+ snprintf(buf, BUF_LEN, "%s%d%03d%04d %s %s", LOGGER_PROCESS_ID, LOG_LV_DEBUG, cat, message_id, message.c_str(), hostname);\r
+ try {\r
+ log4cxx::Logger::getLogger(categoryTable[cat])->forcedLog(log4cxx::Level::getDebug(), buf, log4cxx::spi::LocationInfo(file, "", line));\r
+ }\r
+ catch (const std::exception& ex) {\r
+ std::ostringstream oss;\r
+ oss << "Logging Error (Debug Log) : " << ex.what();\r
+ errorConf(5, oss.str(), __FILE__, __LINE__);\r
+ }\r
+ }\r
+ };\r
+} //namespace l7vs\r
+#endif //__LOGGER_IMPL_H__\r
-/*
- * @file logger_wapprer.h
- * @brief logger module c wrapper.
- *
- * L7VSD: Linux Virtual Server for Layer7 Load Balancing
- * Copyright (C) 2008 NTT COMWARE Corporation.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation; either
- * version 2.1 of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this library; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- **********************************************************************/
-
-#ifndef __LOGGER_WRAPPER_H__
-#define __LOGGER_WRAPPER_H__
-
-#include "logger.h"
-
-/*!
- * retrieve category's log level.
- * this is only wrapper to implement method.
- * @param category that want to know
- * @return log level
- */
-inline enum LOG_LEVEL_TAG logger_get_log_level(const enum LOG_CATEGORY_TAG cat)
-{
- return l7vs::Logger::getInstance().getLogLevel(cat);
-}
-
-/*!
- * set category's log level.
- * this is only wrapper to implement method.
- * @param category to set log level
- * @param level
- * @retval 0 succeed
- * @retval -1 failed
- */
-inline int logger_set_log_level(const enum LOG_CATEGORY_TAG cat, const enum LOG_LEVEL_TAG level)
-{
- if (l7vs::Logger::getInstance().setLogLevel(cat, level)) {
- return 0;
- }
- return -1;
-}
-
-/*!
- * output fatal log.
- * this is only wrapper to implement method.
- * @param category that logging matter occured
- * @param log message id
- * @param current file
- * @param current line
- * @param log message
- * @retrun void
- */
-inline void logger_put_log_fatal(const enum LOG_CATEGORY_TAG cat, const unsigned int message_id, char* file, int line, const char* message)
-{
- l7vs::Logger::getInstance().putLogFatal(cat, message_id, message, file, line);
-}
-
-/*!
- * output error log.
- * this is only wrapper to implement method.
- * @param category that logging matter occured
- * @param log message id
- * @param current file
- * @param current line
- * @param log message
- * @retrun void
- */
-inline void logger_put_log_error(const enum LOG_CATEGORY_TAG cat, const unsigned int message_id, char* file, int line, const char* message)
-{
- l7vs::Logger::getInstance().putLogError(cat, message_id, message, file, line);
-}
-
-/*!
- * output warn log.
- * this is only wrapper to implement method.
- * @param category that logging matter occured
- * @param log message id
- * @param current file
- * @param current line
- * @param log message
- * @retrun void
- */
-inline void logger_put_log_warn(const enum LOG_CATEGORY_TAG cat, const unsigned int message_id, char* file, int line, const char* message)
-{
- l7vs::Logger::getInstance().putLogWarn(cat, message_id, message, file, line);
-}
-
-/*!
- * output info log.
- * this is only wrapper to implement method.
- * @param category that logging matter occured
- * @param log message id
- * @param current file
- * @param current line
- * @param log message
- * @retrun void
- */
-inline void logger_put_log_info(const enum LOG_CATEGORY_TAG cat, const unsigned int message_id, char* file, int line, const char* message)
-{
- l7vs::Logger::getInstance().putLogInfo(cat, message_id, message, file, line);
-}
-
-/*!
- * output debug log.
- * this is only wrapper to implement method.
- * @param category that logging matter occured
- * @param log message id
- * @param current file
- * @param current line
- * @param log message
- * @retrun void
- */
-inline void logger_put_log_debug(const enum LOG_CATEGORY_TAG cat, const unsigned int message_id, char* file, int line, const char* message)
-{
- l7vs::Logger::getInstance().putLogDebug(cat, message_id, message, file, line);
-}
-
-/*!
- * return start category by using module.
- * this is only wrapper to implement method.
- * @param module
- * @retrun start category
- */
-inline enum LOG_CATEGORY_TAG logger_get_category_range_start(enum LOG_MODULE_TAG mod)
-{
- return l7vs::Logger::getInstance().getCategoryRangeStart(mod);
-}
-
-/*!
- * return end category by using module.
- * this is only wrapper to implement method.
- * @param module
- * @retrun end category
- */
-inline enum LOG_CATEGORY_TAG logger_get_category_range_end(enum LOG_MODULE_TAG mod)
-{
- return l7vs::Logger::getInstance().getCategoryRangeEnd(mod);
-}
-
-#define LOGGER_PUT_LOG_FATAL(cat, message_id, message, arg...) { \
- if (LOG_LV_FATAL >= logger_get_log_level(cat)) { \
- char buf[BUF_LEN]; \
- snprintf(buf, BUF_LEN, message, ##arg); \
- logger_put_log_fatal(cat, message_id, __FILE__, __LINE__, buf); }}
-
-#define LOGGER_PUT_LOG_ERROR(cat, message_id, message, arg...) { \
- if (LOG_LV_ERROR >= logger_get_log_level(cat)) { \
- char buf[BUF_LEN]; \
- snprintf(buf, BUF_LEN, message, ##arg); \
- logger_put_log_error(cat, message_id, __FILE__, __LINE__, buf); }}
-
-#define LOGGER_PUT_LOG_WARN(cat, message_id, message, arg...) { \
- if (LOG_LV_WARN >= logger_get_log_level(cat)) { \
- char buf[BUF_LEN]; \
- snprintf(buf, BUF_LEN, message, ##arg); \
- logger_put_log_warn(cat, message_id, __FILE__, __LINE__, buf); }}
-
-#define LOGGER_PUT_LOG_INFO(cat, message_id, message, arg...) { \
- if (LOG_LV_INFO >= logger_get_log_level(cat)) { \
- char buf[BUF_LEN]; \
- snprintf(buf, BUF_LEN, message, ##arg); \
- logger_put_log_info(cat, message_id, __FILE__, __LINE__, buf); }}
-
-#define LOGGER_PUT_LOG_DEBUG(cat, message_id, message, arg...) { \
- char buf[BUF_LEN]; \
- snprintf(buf, BUF_LEN, message, ##arg); \
- logger_put_log_debug(cat, message_id, __FILE__, __LINE__, buf); }
-
-#endif //__LOGGER_WRAPPER_H__
+/*\r
+ * @file logger_wapprer.h\r
+ * @brief logger module c wrapper.\r
+ *\r
+ * L7VSD: Linux Virtual Server for Layer7 Load Balancing\r
+ * Copyright (C) 2008 NTT COMWARE Corporation.\r
+ *\r
+ * This program is free software; you can redistribute it and/or\r
+ * modify it under the terms of the GNU Lesser General Public\r
+ * License as published by the Free Software Foundation; either\r
+ * version 2.1 of the License, or (at your option) any later version.\r
+ *\r
+ * This program is distributed in the hope that it will be useful,\r
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of\r
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU\r
+ * Lesser General Public License for more details.\r
+ *\r
+ * You should have received a copy of the GNU Lesser General Public\r
+ * License along with this library; if not, write to the Free Software\r
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA\r
+ * 02110-1301 USA\r
+ * \r
+ **********************************************************************/\r
+\r
+#ifndef __LOGGER_WRAPPER_H__\r
+#define __LOGGER_WRAPPER_H__\r
+\r
+#include "logger.h"\r
+\r
+/*!\r
+ * retrieve category's log level.\r
+ * this is only wrapper to implement method.\r
+ * @param category that want to know\r
+ * @return log level\r
+ */\r
+inline enum LOG_LEVEL_TAG logger_get_log_level(const enum LOG_CATEGORY_TAG cat)\r
+{\r
+ return l7vs::Logger::getInstance().getLogLevel(cat);\r
+}\r
+\r
+/*!\r
+ * set category's log level.\r
+ * this is only wrapper to implement method.\r
+ * @param category to set log level\r
+ * @param level\r
+ * @retval 0 succeed\r
+ * @retval -1 failed\r
+ */\r
+inline int logger_set_log_level(const enum LOG_CATEGORY_TAG cat, const enum LOG_LEVEL_TAG level)\r
+{\r
+ if (l7vs::Logger::getInstance().setLogLevel(cat, level)) {\r
+ return 0;\r
+ }\r
+ return -1;\r
+}\r
+\r
+/*!\r
+ * output fatal log.\r
+ * this is only wrapper to implement method.\r
+ * @param category that logging matter occured\r
+ * @param log message id \r
+ * @param current file \r
+ * @param current line\r
+ * @param log message \r
+ * @retrun void\r
+ */\r
+inline void logger_put_log_fatal(const enum LOG_CATEGORY_TAG cat, const unsigned int message_id, char* file, int line, const char* message)\r
+{\r
+ l7vs::Logger::getInstance().putLogFatal(cat, message_id, message, file, line);\r
+}\r
+\r
+/*!\r
+ * output error log.\r
+ * this is only wrapper to implement method.\r
+ * @param category that logging matter occured\r
+ * @param log message id \r
+ * @param current file \r
+ * @param current line\r
+ * @param log message \r
+ * @retrun void\r
+ */\r
+inline void logger_put_log_error(const enum LOG_CATEGORY_TAG cat, const unsigned int message_id, char* file, int line, const char* message)\r
+{\r
+ l7vs::Logger::getInstance().putLogError(cat, message_id, message, file, line);\r
+}\r
+\r
+/*!\r
+ * output warn log.\r
+ * this is only wrapper to implement method.\r
+ * @param category that logging matter occured\r
+ * @param log message id \r
+ * @param current file \r
+ * @param current line\r
+ * @param log message \r
+ * @retrun void\r
+ */\r
+inline void logger_put_log_warn(const enum LOG_CATEGORY_TAG cat, const unsigned int message_id, char* file, int line, const char* message)\r
+{\r
+ l7vs::Logger::getInstance().putLogWarn(cat, message_id, message, file, line);\r
+}\r
+\r
+/*!\r
+ * output info log.\r
+ * this is only wrapper to implement method.\r
+ * @param category that logging matter occured\r
+ * @param log message id \r
+ * @param current file \r
+ * @param current line\r
+ * @param log message \r
+ * @retrun void\r
+ */\r
+inline void logger_put_log_info(const enum LOG_CATEGORY_TAG cat, const unsigned int message_id, char* file, int line, const char* message)\r
+{\r
+ l7vs::Logger::getInstance().putLogInfo(cat, message_id, message, file, line);\r
+}\r
+\r
+/*!\r
+ * output debug log.\r
+ * this is only wrapper to implement method.\r
+ * @param category that logging matter occured\r
+ * @param log message id \r
+ * @param current file \r
+ * @param current line\r
+ * @param log message \r
+ * @retrun void\r
+ */\r
+inline void logger_put_log_debug(const enum LOG_CATEGORY_TAG cat, const unsigned int message_id, char* file, int line, const char* message)\r
+{\r
+ l7vs::Logger::getInstance().putLogDebug(cat, message_id, message, file, line);\r
+}\r
+\r
+#define LOGGER_PUT_LOG_FATAL(cat, message_id, message, arg...) { \\r
+ if (LOG_LV_FATAL >= logger_get_log_level(cat)) { \\r
+ char buf[BUF_LEN]; \\r
+ snprintf(buf, BUF_LEN, message, ##arg); \\r
+ logger_put_log_fatal(cat, message_id, __FILE__, __LINE__, buf); }}\r
+ \r
+#define LOGGER_PUT_LOG_ERROR(cat, message_id, message, arg...) { \\r
+ if (LOG_LV_ERROR >= logger_get_log_level(cat)) { \\r
+ char buf[BUF_LEN]; \\r
+ snprintf(buf, BUF_LEN, message, ##arg); \\r
+ logger_put_log_error(cat, message_id, __FILE__, __LINE__, buf); }}\r
+\r
+#define LOGGER_PUT_LOG_WARN(cat, message_id, message, arg...) { \\r
+ if (LOG_LV_WARN >= logger_get_log_level(cat)) { \\r
+ char buf[BUF_LEN]; \\r
+ snprintf(buf, BUF_LEN, message, ##arg); \\r
+ logger_put_log_warn(cat, message_id, __FILE__, __LINE__, buf); }}\r
+\r
+#define LOGGER_PUT_LOG_INFO(cat, message_id, message, arg...) { \\r
+ if (LOG_LV_INFO >= logger_get_log_level(cat)) { \\r
+ char buf[BUF_LEN]; \\r
+ snprintf(buf, BUF_LEN, message, ##arg); \\r
+ logger_put_log_info(cat, message_id, __FILE__, __LINE__, buf); }}\r
+\r
+#define LOGGER_PUT_LOG_DEBUG(cat, message_id, message, arg...) { \\r
+ char buf[BUF_LEN]; \\r
+ snprintf(buf, BUF_LEN, message, ##arg); \\r
+ logger_put_log_debug(cat, message_id, __FILE__, __LINE__, buf); }\r
+\r
+#endif //__LOGGER_WRAPPER_H__\r
-/*
- * @file strict_time_based_rolling_policy.cpp
- * @brief log4cxx's rolling policy class. (time)
- *
- * L7VSD: Linux Virtual Server for Layer7 Load Balancing
- * Copyright (C) 2008 NTT COMWARE Corporation.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation; either
- * version 2.1 of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this library; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- **********************************************************************/
-
-#include <log4cxx/logstring.h>
-#include <log4cxx/rolling/filerenameaction.h>
-#include <log4cxx/helpers/loglog.h>
-#include <log4cxx/helpers/exception.h>
-#include <log4cxx/helpers/stringhelper.h>
-#include <log4cxx/helpers/optionconverter.h>
-#include <time.h>
-#include "strict_time_based_rolling_policy.h"
-#include "lexical_cast.h"
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <unistd.h>
-
-using namespace log4cxx;
-using namespace log4cxx::rolling;
-using namespace log4cxx::helpers;
-using namespace log4cxx::pattern;
-
-#define TIME_BUF_LEN (256)
-#define LOG_DATE_FORMAT "%Y%m%d%H%M"
-#define LOG_DATE_FORMAT_WEEK "%Y%m%d%w%H%M"
-
-IMPLEMENT_LOG4CXX_OBJECT(StrictTimeBasedRollingPolicy)
-
-/*!
- * default constructor.
- * initialize member valiables
- * @param void
- * @return void
- */
-StrictTimeBasedRollingPolicy::StrictTimeBasedRollingPolicy() :
- nextCheck(0), rotationTiming(LOG_TIM_YEAR), rotationTimingValue("")
-{
-}
-
-/*!
- * increase reffernce count
- * @param void
- * @return void
- */
-void StrictTimeBasedRollingPolicy::addRef() const
-{
- TriggeringPolicy::addRef();
-}
-
-/*!
- * decrease reffernce count
- * @param void
- * @return void
- */
-void StrictTimeBasedRollingPolicy::releaseRef() const
-{
- TriggeringPolicy::releaseRef();
-}
-
-/*!
- * evaluate and activate options
- * @param memory pool
- * @return void
- */
-void StrictTimeBasedRollingPolicy::activateOptions(log4cxx::helpers::Pool& pool)
-{
- // check for rotationTimingValue
- if (0 >= rotationTimingValue.length()) {
- LogLog::warn(
- LOG4CXX_STR("The RotationTimingValue option must be set before using StrictTimeBasedRollingPolicy. "));
- throw IllegalStateException();
- }
-
- // call super class's activateOptions
- FixedWindowRollingPolicy::activateOptions(pool);
-}
-
-/*!
- * rotationTimingValue getter
- * @param void
- * @return rotationTimingValue
- */
-std::string StrictTimeBasedRollingPolicy::getRotationTimingValue()
-{
- return rotationTimingValue;
-}
-
-/*!
- * rotationTimingValue setter
- * @param rotationTimingValue
- * @return void
- */
-void StrictTimeBasedRollingPolicy::setRotationTimingValue(const std::string& val)
-{
- rotationTimingValue = val;
-}
-
-/*!
- * rotationTiming getter
- * @param void
- * @return rotationTiming
- */
-LOG_ROTATION_TIMING_TAG StrictTimeBasedRollingPolicy::getRotationTiming()
-{
- return rotationTiming;
-}
-
-/*!
- * rotationTiming setter
- * @param rotationTiming
- * @return void
- */
-void StrictTimeBasedRollingPolicy::setRotationTiming(const LOG_ROTATION_TIMING_TAG val)
-{
- rotationTiming = val;
-}
-
-/*!
- * option setter
- * @param option name
- * @param value
- * @return void
- */
-void StrictTimeBasedRollingPolicy::setOption(const LogString& option, const LogString& value)
-{
- if (StringHelper::equalsIgnoreCase(option,
- LOG4CXX_STR("ROTATIONTIMINGVALUE"),
- LOG4CXX_STR("rotationtimingvalue"))) {
- rotationTimingValue = value;
- }
- else if (StringHelper::equalsIgnoreCase(option,
- LOG4CXX_STR("ROTATIONTIMING"),
- LOG4CXX_STR("rotationtiming"))) {
- rotationTiming = (LOG_ROTATION_TIMING_TAG)OptionConverter::toInt(value, 0);
- }
- else {
- FixedWindowRollingPolicy::setOption(option, value);
- }
-}
-
-/*!
- * rolling policy initialize
- * @param filename of current use
- * @param append or overWrite
- * @param memory pool
- * @return Rollover information
- */
-RolloverDescriptionPtr StrictTimeBasedRollingPolicy::initialize(
- const LogString& currentActiveFile,
- const bool append,
- Pool& pool)
-{
- // get current time
- time_t now_time;
- time_t ret_time = time(&now_time);
- if (-1 == ret_time) {
- LogLog::warn(LOG4CXX_STR("Fail to get CurrentTime. "));
- RolloverDescriptionPtr desc;
- return desc;
- }
-
- // get next rotation timing
- nextCheck = getNextCheck(now_time);
- if (-1 == nextCheck) {
- LogLog::warn(LOG4CXX_STR("Fail to get nextCheck. "));
- RolloverDescriptionPtr desc;
- return desc;
- }
-
- // call super class's initialize
- return FixedWindowRollingPolicy::initialize(currentActiveFile, append, pool);
-}
-
-/*!
- * calculate next rollover timing
- * @param now time
- * @return next rollover time
- */
-time_t StrictTimeBasedRollingPolicy::getNextCheck(time_t now_time)
-{
- struct tm now_tm;
- struct tm *ret_tm;
- ret_tm = localtime_r(&now_time, &now_tm);
- if (0 == ret_tm) {
- return -1;
- }
-
- char buf[TIME_BUF_LEN];
- size_t ret_sz = 0;
- if (LOG_TIM_WEEK == rotationTiming) {
- ret_sz = strftime(buf, sizeof(buf), LOG_DATE_FORMAT_WEEK, &now_tm);
- }
- else {
- ret_sz = strftime(buf, sizeof(buf), LOG_DATE_FORMAT, &now_tm);
- }
- if (0 == ret_sz) {
- return -1;
- }
- std::string now(buf);
-
- int dates[] = {31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31};
- unsigned long long numNowDate = 0;;
- unsigned long long numTimingDate = 0;
-
- int numYear = 0;
- int numMonth = 0;
- int numDate = 0;
- int numNowWeek = 0;
- int numTimingWeek = 0;
- int numHour = 0;
- int numMinute = 0;
-
- struct tm t;
- memset(&t, 0, sizeof(struct tm));
-
- time_t next = 0;
-
- try {
- switch (rotationTiming) {
- case LOG_TIM_YEAR:
- numNowDate = l7vs::lexical_cast<unsigned long long>(now.substr(4));
- numTimingDate = l7vs::lexical_cast<unsigned long long>(rotationTimingValue);
-
- numYear = l7vs::lexical_cast<int>(now.substr(0, 4));
- numMonth = l7vs::lexical_cast<int>(rotationTimingValue.substr(0, 2));
- numDate = l7vs::lexical_cast<int>(rotationTimingValue.substr(2, 2));
- numHour = l7vs::lexical_cast<int>(rotationTimingValue.substr(4, 2));
- numMinute = l7vs::lexical_cast<int>(rotationTimingValue.substr(6));
-
- if (numTimingDate > numNowDate) {
- t.tm_year = numYear - 1900;
- }
- else {
-#if defined(LOGGER_PROCESS_ADM)
- t.tm_year = numYear - 1900;
-#else //LOGGER_PROCESS_VSD or LOGGER_PROCESS_SNM
- t.tm_year = numYear + 1 - 1900;
-#endif
- }
- t.tm_mon = numMonth - 1;
- t.tm_mday = numDate;
- t.tm_hour = numHour;
- t.tm_min = numMinute;
-
- next = mktime(&t);
- if (-1 == next) {
- return -1;
- }
- break;
-
- case LOG_TIM_MONTH:
- numNowDate = l7vs::lexical_cast<unsigned long long>(now.substr(6));
- numTimingDate = l7vs::lexical_cast<unsigned long long>(rotationTimingValue);
-
- numYear = l7vs::lexical_cast<int>(now.substr(0, 4));
- numMonth = l7vs::lexical_cast<int>(now.substr(4, 2));
- numDate = l7vs::lexical_cast<int>(rotationTimingValue.substr(0, 2));
- numHour = l7vs::lexical_cast<int>(rotationTimingValue.substr(2, 2));
- numMinute = l7vs::lexical_cast<int>(rotationTimingValue.substr(4));
-
- if (numTimingDate > numNowDate) {
- t.tm_year = numYear - 1900;
- t.tm_mon = numMonth - 1;
- }
- else {
-#if defined(LOGGER_PROCESS_ADM)
- t.tm_year = numYear - 1900;
- t.tm_mon = numMonth - 1;
-#else //LOGGER_PROCESS_VSD or LOGGER_PROCESS_SNM
- if (12 == numMonth) {
- t.tm_year = numYear + 1 - 1900;
- t.tm_mon = 0;
- }
- else {
- t.tm_year = numYear - 1900;
- t.tm_mon = numMonth + 1 - 1;
- }
-#endif
- }
-
- if (numDate > dates[t.tm_mon]) {
- t.tm_mday = dates[t.tm_mon];
- }
- else {
- t.tm_mday = numDate;
- }
-
- t.tm_hour = numHour;
- t.tm_min = numMinute;
-
- next = mktime(&t);
- if (-1 == next) {
- return -1;
- }
-
- break;
- case LOG_TIM_WEEK:
- numNowDate = l7vs::lexical_cast<unsigned long long>(now.substr(8));
- numTimingDate = l7vs::lexical_cast<unsigned long long>(rotationTimingValue);
-
- numYear = l7vs::lexical_cast<int>(now.substr(0, 4));
- numMonth = l7vs::lexical_cast<int>(now.substr(4, 2));
- numDate = l7vs::lexical_cast<int>(now.substr(6, 2));
- numNowWeek = l7vs::lexical_cast<int>(now.substr(8, 1));
- numTimingWeek = l7vs::lexical_cast<int>(rotationTimingValue.substr(0, 1));
- numHour = l7vs::lexical_cast<int>(rotationTimingValue.substr(1, 2));
- numMinute = l7vs::lexical_cast<int>(rotationTimingValue.substr(3));
-
- t.tm_year = numYear - 1900;
- t.tm_mon = numMonth - 1;
- if (numTimingDate > numNowDate) {
- t.tm_mday = numDate + (numTimingWeek - numNowWeek);
- }
- else {
-#if defined(LOGGER_PROCESS_ADM)
- t.tm_mday = numDate + (numTimingWeek - numNowWeek);
-#else //LOGGER_PROCESS_VSD or LOGGER_PROCESS_SNM
- t.tm_mday = numDate + (7 - (numNowWeek - numTimingWeek));
-#endif
- }
- t.tm_hour = numHour;
- t.tm_min = numMinute;
-
- next = mktime(&t);
- if (-1 == next) {
- return -1;
- }
-
- break;
-
- case LOG_TIM_DATE:
- numNowDate = l7vs::lexical_cast<unsigned long long>(now.substr(8));
- numTimingDate = l7vs::lexical_cast<unsigned long long>(rotationTimingValue);
-
- numYear = l7vs::lexical_cast<int>(now.substr(0, 4));
- numMonth = l7vs::lexical_cast<int>(now.substr(4, 2));
- numDate = l7vs::lexical_cast<int>(now.substr(6, 2));
- numHour = l7vs::lexical_cast<int>(rotationTimingValue.substr(0, 2));
- numMinute = l7vs::lexical_cast<int>(rotationTimingValue.substr(2));
-
- t.tm_year = numYear - 1900;
- t.tm_mon = numMonth - 1;
- if (numTimingDate > numNowDate) {
- t.tm_mday = numDate;
- }
- else {
-#if defined(LOGGER_PROCESS_ADM)
- t.tm_mday = numDate;
-#else //LOGGER_PROCESS_VSD or LOGGER_PROCESS_SNM
- t.tm_mday = numDate + 1;
-#endif
- }
- t.tm_hour = numHour;
- t.tm_min = numMinute;
-
- next = mktime(&t);
- if (-1 == next) {
- return -1;
- }
- break;
-
- default: //HOUR
- numNowDate = l7vs::lexical_cast<unsigned long long>(now.substr(10));
- numTimingDate = l7vs::lexical_cast<unsigned long long>(rotationTimingValue);
-
- numYear = l7vs::lexical_cast<int>(now.substr(0, 4));
- numMonth = l7vs::lexical_cast<int>(now.substr(4, 2));
- numDate = l7vs::lexical_cast<int>(now.substr(6, 2));
- numHour = l7vs::lexical_cast<int>(now.substr(8, 2));
- numMinute = l7vs::lexical_cast<int>(rotationTimingValue);
-
- t.tm_year = numYear - 1900;
- t.tm_mon = numMonth - 1;
- t.tm_mday = numDate;
- if (numTimingDate > numNowDate) {
- t.tm_hour = numHour;
- }
- else {
-#if defined(LOGGER_PROCESS_ADM)
- t.tm_hour = numHour;
-#else //LOGGER_PROCESS_VSD or LOGGER_PROCESS_SNM
- t.tm_hour = numHour + 1;
-#endif
- }
- t.tm_min = numMinute;
-
- next = mktime(&t);
- if (-1 == next) {
- return -1;
- }
- }
- }
- catch (const std::exception& ex) {
- return -1;
- }
- return next;
-
-}
-
-/*!
- * log file rollover opration
- * @param name of current log file
- * @param memory pool
- * @return Rollover infomation
- */
-RolloverDescriptionPtr StrictTimeBasedRollingPolicy::rollover(
- const LogString& currentActiveFile,
- Pool& pool)
-{
- // get current time
- time_t now_time;
- time_t ret_time = time(&now_time);
- if (-1 == ret_time) {
- LogLog::warn(LOG4CXX_STR("Fail to get CurrentTime. "));
- RolloverDescriptionPtr desc;
- return desc;
- }
-
- // get next rotation timing
- nextCheck = getNextCheck(now_time);
- if (-1 == nextCheck) {
- LogLog::warn(LOG4CXX_STR("Fail to get nextCheck. "));
- RolloverDescriptionPtr desc;
- return desc;
- }
-
- // call super class's rollover
- return FixedWindowRollingPolicy::rollover(currentActiveFile, pool);
-
-}
-
-/*!
- * returns do rollover or not
- * @param appender (not use)
- * @param event (not use)
- * @param filename
- * @param fileLength (not use)
- * @retval true do rollover
- * @retval false not rollover yet
- */
-bool StrictTimeBasedRollingPolicy::isTriggeringEvent(
- Appender* /* appender */,
- const log4cxx::spi::LoggingEventPtr& /* event */,
- const LogString& filename,
- size_t /* fileLength */)
-{
- time_t now_time;
- time_t ret_time = time(&now_time);
- if (-1 == ret_time) {
- LogLog::warn(LOG4CXX_STR("Fail to get time. "));
- return false;
- }
-#if defined(LOGGER_PROCESS_ADM)
- struct stat sb;
-
- if (-1 == stat(filename.c_str(), &sb)) {
- LogLog::warn(LOG4CXX_STR("Fail to get logfile update time. "));
- return false;
- }
- if (now_time > nextCheck && nextCheck > sb.st_mtime) {
- // Do rollover.
- return true;
- } else {
- // Do not rollover.
- return false;
- }
-#else //LOGGER_PROCESS_VSD or LOGGER_PROCESS_SNM
- return now_time > nextCheck;
-#endif
-}
+/*\r
+ * @file strict_time_based_rolling_policy.cpp\r
+ * @brief log4cxx's rolling policy class. (time)\r
+ *\r
+ * L7VSD: Linux Virtual Server for Layer7 Load Balancing\r
+ * Copyright (C) 2008 NTT COMWARE Corporation.\r
+ *\r
+ * This program is free software; you can redistribute it and/or\r
+ * modify it under the terms of the GNU Lesser General Public\r
+ * License as published by the Free Software Foundation; either\r
+ * version 2.1 of the License, or (at your option) any later version.\r
+ *\r
+ * This program is distributed in the hope that it will be useful,\r
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of\r
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU\r
+ * Lesser General Public License for more details.\r
+ * \r
+ * You should have received a copy of the GNU Lesser General Public\r
+ * License along with this library; if not, write to the Free Software\r
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA\r
+ * 02110-1301 USA\r
+ *\r
+ **********************************************************************/\r
+\r
+#include <log4cxx/logstring.h>\r
+#include <log4cxx/rolling/filerenameaction.h>\r
+#include <log4cxx/helpers/loglog.h>\r
+#include <log4cxx/helpers/exception.h>\r
+#include <log4cxx/helpers/stringhelper.h>\r
+#include <log4cxx/helpers/optionconverter.h>\r
+#include <time.h>\r
+#include "strict_time_based_rolling_policy.h"\r
+#include <boost/lexical_cast.hpp>\r
+#include <sys/types.h>\r
+#include <sys/stat.h>\r
+#include <unistd.h>\r
+\r
+using namespace l7vs;\r
+using namespace log4cxx;\r
+using namespace log4cxx::rolling;\r
+using namespace log4cxx::helpers;\r
+using namespace log4cxx::pattern;\r
+\r
+#define TIME_BUF_LEN (256)\r
+#define LOG_DATE_FORMAT "%Y%m%d%H%M"\r
+#define LOG_DATE_FORMAT_WEEK "%Y%m%d%w%H%M"\r
+\r
+IMPLEMENT_LOG4CXX_OBJECT(StrictTimeBasedRollingPolicy)\r
+\r
+/*!\r
+ * default constructor.\r
+ * initialize member valiables\r
+ * @param void\r
+ * @return void\r
+ */\r
+StrictTimeBasedRollingPolicy::StrictTimeBasedRollingPolicy() :\r
+ nextCheck(0), rotationTiming(LOG_TIM_YEAR), rotationTimingValue("")\r
+{\r
+}\r
+\r
+/*!\r
+ * increase reffernce count\r
+ * @param void\r
+ * @return void\r
+ */\r
+void StrictTimeBasedRollingPolicy::addRef() const\r
+{\r
+ TriggeringPolicy::addRef();\r
+}\r
+\r
+/*!\r
+ * decrease reffernce count\r
+ * @param void\r
+ * @return void\r
+ */\r
+void StrictTimeBasedRollingPolicy::releaseRef() const\r
+{\r
+ TriggeringPolicy::releaseRef();\r
+}\r
+\r
+/*!\r
+ * evaluate and activate options\r
+ * @param memory pool\r
+ * @return void\r
+ */\r
+void StrictTimeBasedRollingPolicy::activateOptions(log4cxx::helpers::Pool& pool)\r
+{\r
+ // check for rotationTimingValue\r
+ if (0 >= rotationTimingValue.length()) {\r
+ LogLog::warn(\r
+ LOG4CXX_STR("The RotationTimingValue option must be set before using StrictTimeBasedRollingPolicy. "));\r
+ throw IllegalStateException();\r
+ }\r
+\r
+ // call super class's activateOptions\r
+ FixedWindowRollingPolicy::activateOptions(pool);\r
+}\r
+\r
+/*!\r
+ * rotationTimingValue getter\r
+ * @param void\r
+ * @return rotationTimingValue\r
+ */\r
+std::string StrictTimeBasedRollingPolicy::getRotationTimingValue()\r
+{\r
+ return rotationTimingValue;\r
+}\r
+ \r
+/*!\r
+ * rotationTimingValue setter\r
+ * @param rotationTimingValue\r
+ * @return void\r
+ */\r
+void StrictTimeBasedRollingPolicy::setRotationTimingValue(const std::string& val)\r
+{\r
+ rotationTimingValue = val;\r
+}\r
+\r
+/*!\r
+ * rotationTiming getter\r
+ * @param void\r
+ * @return rotationTiming\r
+ */\r
+LOG_ROTATION_TIMING_TAG StrictTimeBasedRollingPolicy::getRotationTiming()\r
+{\r
+ return rotationTiming;\r
+}\r
+ \r
+/*!\r
+ * rotationTiming setter\r
+ * @param rotationTiming\r
+ * @return void\r
+ */\r
+void StrictTimeBasedRollingPolicy::setRotationTiming(const LOG_ROTATION_TIMING_TAG val)\r
+{\r
+ rotationTiming = val;\r
+}\r
+\r
+/*!\r
+ * option setter\r
+ * @param option name\r
+ * @param value\r
+ * @return void\r
+ */\r
+void StrictTimeBasedRollingPolicy::setOption(const LogString& option, const LogString& value)\r
+{\r
+ if (StringHelper::equalsIgnoreCase(option,\r
+ LOG4CXX_STR("ROTATIONTIMINGVALUE"),\r
+ LOG4CXX_STR("rotationtimingvalue"))) {\r
+ rotationTimingValue = value;\r
+ }\r
+ else if (StringHelper::equalsIgnoreCase(option,\r
+ LOG4CXX_STR("ROTATIONTIMING"),\r
+ LOG4CXX_STR("rotationtiming"))) {\r
+ rotationTiming = (LOG_ROTATION_TIMING_TAG)OptionConverter::toInt(value, 0);\r
+ }\r
+ else {\r
+ FixedWindowRollingPolicy::setOption(option, value);\r
+ }\r
+}\r
+\r
+/*!\r
+ * rolling policy initialize\r
+ * @param filename of current use\r
+ * @param append or overWrite\r
+ * @param memory pool\r
+ * @return Rollover information\r
+ */\r
+RolloverDescriptionPtr StrictTimeBasedRollingPolicy::initialize(\r
+ const LogString& currentActiveFile,\r
+ const bool append,\r
+ Pool& pool) \r
+{\r
+ // get current time\r
+ time_t now_time;\r
+ time_t ret_time = time(&now_time);\r
+ if (-1 == ret_time) {\r
+ LogLog::warn(LOG4CXX_STR("Fail to get CurrentTime. "));\r
+ RolloverDescriptionPtr desc;\r
+ return desc;\r
+ }\r
+\r
+ // get next rotation timing\r
+ nextCheck = getNextCheck(now_time);\r
+ if (-1 == nextCheck) {\r
+ LogLog::warn(LOG4CXX_STR("Fail to get nextCheck. "));\r
+ RolloverDescriptionPtr desc;\r
+ return desc;\r
+ } \r
+\r
+ // call super class's initialize\r
+ return FixedWindowRollingPolicy::initialize(currentActiveFile, append, pool);\r
+}\r
+\r
+/*!\r
+ * calculate next rollover timing\r
+ * @param now time\r
+ * @return next rollover time\r
+ */\r
+time_t StrictTimeBasedRollingPolicy::getNextCheck(time_t now_time)\r
+{\r
+ struct tm now_tm;\r
+ struct tm *ret_tm;\r
+ ret_tm = localtime_r(&now_time, &now_tm);\r
+ if (0 == ret_tm) {\r
+ return -1;\r
+ }\r
+ \r
+ char buf[TIME_BUF_LEN];\r
+ size_t ret_sz = 0;\r
+ if (LOG_TIM_WEEK == rotationTiming) {\r
+ ret_sz = strftime(buf, sizeof(buf), LOG_DATE_FORMAT_WEEK, &now_tm);\r
+ }\r
+ else {\r
+ ret_sz = strftime(buf, sizeof(buf), LOG_DATE_FORMAT, &now_tm);\r
+ }\r
+ if (0 == ret_sz) {\r
+ return -1;\r
+ }\r
+ std::string now(buf);\r
+\r
+ int dates[] = {31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31}; \r
+ unsigned long long numNowDate = 0;;\r
+ unsigned long long numTimingDate = 0;\r
+\r
+ int numYear = 0;\r
+ int numMonth = 0;\r
+ int numDate = 0;\r
+ int numNowWeek = 0;\r
+ int numTimingWeek = 0;\r
+ int numHour = 0;\r
+ int numMinute = 0;\r
+\r
+ struct tm t;\r
+ memset(&t, 0, sizeof(struct tm));\r
+\r
+ time_t next = 0;\r
+\r
+ try {\r
+ switch (rotationTiming) {\r
+ case LOG_TIM_YEAR:\r
+ numNowDate = boost::lexical_cast<unsigned long long>(now.substr(4));\r
+ numTimingDate = boost::lexical_cast<unsigned long long>(rotationTimingValue);\r
+ \r
+ numYear = boost::lexical_cast<int>(now.substr(0, 4));\r
+ numMonth =boost::lexical_cast<int>(rotationTimingValue.substr(0, 2));\r
+ numDate = boost::lexical_cast<int>(rotationTimingValue.substr(2, 2));\r
+ numHour = boost::lexical_cast<int>(rotationTimingValue.substr(4, 2));\r
+ numMinute = boost::lexical_cast<int>(rotationTimingValue.substr(6));\r
+ \r
+ if (numTimingDate > numNowDate) {\r
+ t.tm_year = numYear - 1900;\r
+ }\r
+ else {\r
+ t.tm_year = numYear + 1 - 1900;\r
+ }\r
+ t.tm_mon = numMonth - 1;\r
+ t.tm_mday = numDate;\r
+ t.tm_hour = numHour;\r
+ t.tm_min = numMinute;\r
+ \r
+ next = mktime(&t);\r
+ if (-1 == next) {\r
+ return -1;\r
+ }\r
+ break;\r
+ \r
+ case LOG_TIM_MONTH:\r
+ numNowDate = boost::lexical_cast<unsigned long long>(now.substr(6));\r
+ numTimingDate = boost::lexical_cast<unsigned long long>(rotationTimingValue);\r
+ \r
+ numYear = boost::lexical_cast<int>(now.substr(0, 4));\r
+ numMonth = boost::lexical_cast<int>(now.substr(4, 2));\r
+ numDate = boost::lexical_cast<int>(rotationTimingValue.substr(0, 2));\r
+ numHour = boost::lexical_cast<int>(rotationTimingValue.substr(2, 2));\r
+ numMinute = boost::lexical_cast<int>(rotationTimingValue.substr(4));\r
+ \r
+ if (numTimingDate > numNowDate) {\r
+ t.tm_year = numYear - 1900;\r
+ t.tm_mon = numMonth - 1;\r
+ }\r
+ else {\r
+ if (12 == numMonth) {\r
+ t.tm_year = numYear + 1 - 1900;\r
+ t.tm_mon = 0;\r
+ }\r
+ else {\r
+ t.tm_year = numYear - 1900;\r
+ t.tm_mon = numMonth + 1 - 1;\r
+ }\r
+ }\r
+ \r
+ if (numDate > dates[t.tm_mon]) {\r
+ t.tm_mday = dates[t.tm_mon];\r
+ }\r
+ else {\r
+ t.tm_mday = numDate;\r
+ }\r
+\r
+ t.tm_hour = numHour;\r
+ t.tm_min = numMinute;\r
+ \r
+ next = mktime(&t);\r
+ if (-1 == next) {\r
+ return -1;\r
+ }\r
+ \r
+ break;\r
+ case LOG_TIM_WEEK:\r
+ numNowDate = boost::lexical_cast<unsigned long long>(now.substr(8));\r
+ numTimingDate = boost::lexical_cast<unsigned long long>(rotationTimingValue);\r
+ \r
+ numYear = boost::lexical_cast<int>(now.substr(0, 4));\r
+ numMonth = boost::lexical_cast<int>(now.substr(4, 2));\r
+ numDate = boost::lexical_cast<int>(now.substr(6, 2));\r
+ numNowWeek = boost::lexical_cast<int>(now.substr(8, 1));\r
+ numTimingWeek = boost::lexical_cast<int>(rotationTimingValue.substr(0, 1));\r
+ numHour = boost::lexical_cast<int>(rotationTimingValue.substr(1, 2));\r
+ numMinute = boost::lexical_cast<int>(rotationTimingValue.substr(3));\r
+ \r
+ t.tm_year = numYear - 1900;\r
+ t.tm_mon = numMonth - 1;\r
+ if (numTimingDate > numNowDate) { \r
+ t.tm_mday = numDate + (numTimingWeek - numNowWeek); \r
+ }\r
+ else {\r
+ t.tm_mday = numDate + (7 - (numNowWeek - numTimingWeek));\r
+ }\r
+ t.tm_hour = numHour;\r
+ t.tm_min = numMinute;\r
+ \r
+ next = mktime(&t);\r
+ if (-1 == next) {\r
+ return -1;\r
+ }\r
+ \r
+ break;\r
+ \r
+ case LOG_TIM_DATE:\r
+ numNowDate = boost::lexical_cast<unsigned long long>(now.substr(8));\r
+ numTimingDate = boost::lexical_cast<unsigned long long>(rotationTimingValue);\r
+ \r
+ numYear = boost::lexical_cast<int>(now.substr(0, 4));\r
+ numMonth = boost::lexical_cast<int>(now.substr(4, 2));\r
+ numDate = boost::lexical_cast<int>(now.substr(6, 2));\r
+ numHour = boost::lexical_cast<int>(rotationTimingValue.substr(0, 2));\r
+ numMinute = boost::lexical_cast<int>(rotationTimingValue.substr(2));\r
+ \r
+ t.tm_year = numYear - 1900;\r
+ t.tm_mon = numMonth - 1;\r
+ if (numTimingDate > numNowDate) { \r
+ t.tm_mday = numDate;\r
+ }\r
+ else {\r
+ t.tm_mday = numDate + 1; \r
+ }\r
+ t.tm_hour = numHour;\r
+ t.tm_min = numMinute;\r
+ \r
+ next = mktime(&t);\r
+ if (-1 == next) {\r
+ return -1;\r
+ }\r
+ break;\r
+ \r
+ default: //HOUR\r
+ numNowDate = boost::lexical_cast<unsigned long long>(now.substr(10));\r
+ numTimingDate = boost::lexical_cast<unsigned long long>(rotationTimingValue);\r
+ \r
+ numYear = boost::lexical_cast<int>(now.substr(0, 4));\r
+ numMonth = boost::lexical_cast<int>(now.substr(4, 2));\r
+ numDate = boost::lexical_cast<int>(now.substr(6, 2));\r
+ numHour = boost::lexical_cast<int>(now.substr(8, 2));\r
+ numMinute = boost::lexical_cast<int>(rotationTimingValue);\r
+ \r
+ t.tm_year = numYear - 1900;\r
+ t.tm_mon = numMonth - 1;\r
+ t.tm_mday = numDate;\r
+ if (numTimingDate > numNowDate) {\r
+ t.tm_hour = numHour;\r
+ }\r
+ else {\r
+ t.tm_hour = numHour + 1;\r
+ }\r
+ t.tm_min = numMinute;\r
+ \r
+ next = mktime(&t);\r
+ if (-1 == next) {\r
+ return -1;\r
+ }\r
+ }\r
+ }\r
+ catch (const std::exception& ex) {\r
+ return -1;\r
+ }\r
+ return next;\r
+\r
+}\r
+\r
+/*!\r
+ * log file rollover opration\r
+ * @param name of current log file\r
+ * @param memory pool\r
+ * @return Rollover infomation\r
+ */\r
+RolloverDescriptionPtr StrictTimeBasedRollingPolicy::rollover(\r
+ const LogString& currentActiveFile,\r
+ Pool& pool) \r
+{\r
+ // get current time\r
+ time_t now_time;\r
+ time_t ret_time = time(&now_time);\r
+ if (-1 == ret_time) {\r
+ LogLog::warn(LOG4CXX_STR("Fail to get CurrentTime. "));\r
+ RolloverDescriptionPtr desc;\r
+ return desc;\r
+ }\r
+\r
+ // get next rotation timing\r
+ nextCheck = getNextCheck(now_time);\r
+ if (-1 == nextCheck) {\r
+ LogLog::warn(LOG4CXX_STR("Fail to get nextCheck. "));\r
+ RolloverDescriptionPtr desc;\r
+ return desc;\r
+ } \r
+\r
+ // call super class's rollover\r
+ return FixedWindowRollingPolicy::rollover(currentActiveFile, pool);\r
+\r
+}\r
+\r
+/*!\r
+ * returns do rollover or not\r
+ * @param appender (not use)\r
+ * @param event (not use)\r
+ * @param filename\r
+ * @param fileLength (not use)\r
+ * @retval true do rollover\r
+ * @retval false not rollover yet\r
+ */\r
+bool StrictTimeBasedRollingPolicy::isTriggeringEvent(\r
+ Appender* /* appender */,\r
+ const log4cxx::spi::LoggingEventPtr& /* event */,\r
+ const LogString& filename,\r
+ size_t /* fileLength */) \r
+{\r
+ time_t now_time;\r
+ time_t ret_time = time(&now_time);\r
+ if (-1 == ret_time) {\r
+ LogLog::warn(LOG4CXX_STR("Fail to get time. "));\r
+ return false;\r
+ }\r
+ return now_time > nextCheck;\r
+}\r
-/*
- * @file strict_time_based_rolling_policy.h
- * @brief log4cxx's rolling policy class. (time)
- *
- * L7VSD: Linux Virtual Server for Layer7 Load Balancing
- * Copyright (C) 2008 NTT COMWARE Corporation.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation; either
- * version 2.1 of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this library; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- **********************************************************************/
-
-#ifndef __STRICT_TIME_BASED_ROLLING_POLICY_H__
-#define __STRICT_TIME_BASED_ROLLING_POLICY_H__
-
-#include <log4cxx/portability.h>
-#include <log4cxx/rolling/rollingpolicybase.h>
-#include <log4cxx/rolling/triggeringpolicy.h>
-#include <log4cxx/rolling/fixedwindowrollingpolicy.h>
-#include "logger_enum.h"
-
-namespace log4cxx {
- namespace rolling {
- /*!
- * log4cxx time based rolling policy class.
- * this policy class can specify rolling time more strictly
- * than normal TimeBasedRollingPolicy.
- */
- class LOG4CXX_EXPORT StrictTimeBasedRollingPolicy :
- public FixedWindowRollingPolicy,
- public TriggeringPolicy
- {
- DECLARE_LOG4CXX_OBJECT(StrictTimeBasedRollingPolicy)
- BEGIN_LOG4CXX_CAST_MAP()
- LOG4CXX_CAST_ENTRY(StrictTimeBasedRollingPolicy)
- LOG4CXX_CAST_ENTRY_CHAIN(FixedWindowRollingPolicy)
- LOG4CXX_CAST_ENTRY_CHAIN(TriggeringPolicy)
- END_LOG4CXX_CAST_MAP()
-
- protected:
- //! time of next rollover
- time_t nextCheck;
- /*!
- * rotation timing
- * LOG_TIM_YEAR = yearly
- * LOG_TIM_MONTH = monthly
- * LOG_TIM_WEEK = weekly
- * LOG_TIM_DATE = daily
- * LOG_TIM_HOUR = hourly
- */
- LOG_ROTATION_TIMING_TAG rotationTiming;
- /*!
- * rotation timing value
- *
- * rotation timing value
- * -------------------------------------------------
- * LOG_TIM_YEAR "03051500" (3/5 15:00)
- * LOG_TIM_MONTH "051100" (5 11:00)
- * LOG_TIM_WEEK "12000" (mon 20:00) sun = 0, sat = 6
- * LOG_TIM_DATE "1500" (15:00)
- * LOG_TIM_HOUR "45" (45)
- */
- std::string rotationTimingValue;
- //! calculate next rollover timing
- time_t getNextCheck(time_t now_time);
-
- public:
- //! default constructor
- StrictTimeBasedRollingPolicy();
- //! increase reffernce count
- void addRef() const;
- //! decrease reffernce count
- void releaseRef() const;
- //! option setter
- void setOption(const LogString&, const LogString&);
- //! evaluate and activate options
- void activateOptions(log4cxx::helpers::Pool& );
-
- //! rotationTiming getter
- LOG_ROTATION_TIMING_TAG getRotationTiming();
- //! rotationTiming setter
- void setRotationTiming(const LOG_ROTATION_TIMING_TAG);
- //! rotatioTimingValue getter
- std::string getRotationTimingValue();
- //! rotatioTimingValue setter
- void setRotationTimingValue(const std::string&);
-
- //! rolling policy initialize
- RolloverDescriptionPtr initialize(
- const LogString& file,
- const bool append,
- log4cxx::helpers::Pool& pool);
- //! invoke when rollover event
- RolloverDescriptionPtr rollover(const LogString& activeFile,
- log4cxx::helpers::Pool& pool);
-
- //! returns do rollover or not
- virtual bool isTriggeringEvent(
- Appender* appender,
- const log4cxx::spi::LoggingEventPtr& event,
- const LogString& filename,
- size_t fileLength);
-
- };
- LOG4CXX_PTR_DEF(StrictTimeBasedRollingPolicy);
- }
-}
-
-#endif //__STRICT_TIME_BASED_ROLLING_POLICY_H__
-
+/*\r
+ * @file strict_time_based_rolling_policy.h\r
+ * @brief log4cxx's rolling policy class. (time)\r
+ *\r
+ * L7VSD: Linux Virtual Server for Layer7 Load Balancing\r
+ * Copyright (C) 2008 NTT COMWARE Corporation.\r
+ *\r
+ * This program is free software; you can redistribute it and/or\r
+ * modify it under the terms of the GNU Lesser General Public\r
+ * License as published by the Free Software Foundation; either\r
+ * version 2.1 of the License, or (at your option) any later version.\r
+ *\r
+ * This program is distributed in the hope that it will be useful,\r
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of\r
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU\r
+ * Lesser General Public License for more details.\r
+ * \r
+ * You should have received a copy of the GNU Lesser General Public\r
+ * License along with this library; if not, write to the Free Software\r
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA\r
+ * 02110-1301 USA\r
+ *\r
+ **********************************************************************/\r
+\r
+#ifndef __STRICT_TIME_BASED_ROLLING_POLICY_H__\r
+#define __STRICT_TIME_BASED_ROLLING_POLICY_H__\r
+\r
+#include <log4cxx/portability.h>\r
+#include <log4cxx/rolling/rollingpolicybase.h>\r
+#include <log4cxx/rolling/triggeringpolicy.h>\r
+#include <log4cxx/rolling/fixedwindowrollingpolicy.h>\r
+#include "logger_enum.h"\r
+\r
+namespace log4cxx {\r
+ namespace rolling {\r
+ /*!\r
+ * log4cxx time based rolling policy class.\r
+ * this policy class can specify rolling time more strictly\r
+ * than normal TimeBasedRollingPolicy.\r
+ */\r
+ class LOG4CXX_EXPORT StrictTimeBasedRollingPolicy :\r
+ public FixedWindowRollingPolicy,\r
+ public TriggeringPolicy\r
+ {\r
+ DECLARE_LOG4CXX_OBJECT(StrictTimeBasedRollingPolicy)\r
+ BEGIN_LOG4CXX_CAST_MAP()\r
+ LOG4CXX_CAST_ENTRY(StrictTimeBasedRollingPolicy)\r
+ LOG4CXX_CAST_ENTRY_CHAIN(FixedWindowRollingPolicy)\r
+ LOG4CXX_CAST_ENTRY_CHAIN(TriggeringPolicy)\r
+ END_LOG4CXX_CAST_MAP()\r
+\r
+ protected:\r
+ //! time of next rollover\r
+ time_t nextCheck;\r
+ /*!\r
+ * rotation timing\r
+ * LOG_TIM_YEAR = yearly\r
+ * LOG_TIM_MONTH = monthly\r
+ * LOG_TIM_WEEK = weekly\r
+ * LOG_TIM_DATE = daily\r
+ * LOG_TIM_HOUR = hourly\r
+ */\r
+ l7vs::LOG_ROTATION_TIMING_TAG rotationTiming;\r
+ /*!\r
+ * rotation timing value \r
+ *\r
+ * rotation timing value\r
+ * -------------------------------------------------\r
+ * LOG_TIM_YEAR "03051500" (3/5 15:00)\r
+ * LOG_TIM_MONTH "051100" (5 11:00)\r
+ * LOG_TIM_WEEK "12000" (mon 20:00) sun = 0, sat = 6\r
+ * LOG_TIM_DATE "1500" (15:00)\r
+ * LOG_TIM_HOUR "45" (45)\r
+ */\r
+ std::string rotationTimingValue;\r
+ //! calculate next rollover timing\r
+ time_t getNextCheck(time_t now_time);\r
+ \r
+ public:\r
+ //! default constructor\r
+ StrictTimeBasedRollingPolicy();\r
+ //! increase reffernce count\r
+ void addRef() const;\r
+ //! decrease reffernce count\r
+ void releaseRef() const;\r
+ //! option setter\r
+ void setOption(const LogString&, const LogString&);\r
+ //! evaluate and activate options\r
+ void activateOptions(log4cxx::helpers::Pool& );\r
+\r
+ //! rotationTiming getter\r
+ l7vs::LOG_ROTATION_TIMING_TAG getRotationTiming();\r
+ //! rotationTiming setter\r
+ void setRotationTiming(const l7vs::LOG_ROTATION_TIMING_TAG);\r
+ //! rotatioTimingValue getter\r
+ std::string getRotationTimingValue();\r
+ //! rotatioTimingValue setter\r
+ void setRotationTimingValue(const std::string&);\r
+ \r
+ //! rolling policy initialize\r
+ RolloverDescriptionPtr initialize(\r
+ const LogString& file,\r
+ const bool append,\r
+ log4cxx::helpers::Pool& pool);\r
+ //! invoke when rollover event\r
+ RolloverDescriptionPtr rollover(const LogString& activeFile,\r
+ log4cxx::helpers::Pool& pool);\r
+ \r
+ //! returns do rollover or not \r
+ virtual bool isTriggeringEvent(\r
+ Appender* appender,\r
+ const log4cxx::spi::LoggingEventPtr& event,\r
+ const LogString& filename,\r
+ size_t fileLength);\r
+ \r
+ };\r
+ LOG4CXX_PTR_DEF(StrictTimeBasedRollingPolicy);\r
+ }\r
+}\r
+\r
+#endif //__STRICT_TIME_BASED_ROLLING_POLICY_H__\r
+\r
-/*
- * @file time_and_size_based_rolling_policy.cpp
- * @brief log4cxx's rolling policy class. (time + size)
- *
- * L7VSD: Linux Virtual Server for Layer7 Load Balancing
- * Copyright (C) 2008 NTT COMWARE Corporation.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation; either
- * version 2.1 of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this library; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- **********************************************************************/
-
-#include <log4cxx/logstring.h>
-#include <log4cxx/pattern/filedatepatternconverter.h>
-#include <log4cxx/helpers/date.h>
-#include <log4cxx/rolling/filerenameaction.h>
-#include <log4cxx/helpers/loglog.h>
-#include <log4cxx/helpers/exception.h>
-#include <log4cxx/helpers/stringhelper.h>
-#include <log4cxx/helpers/optionconverter.h>
-#include <time.h>
-#include "time_and_size_based_rolling_policy.h"
-#include "lexical_cast.h"
-
-#define DEFAULT_MAX_FILE_SIZE (10 * 1024 * 1024)
-
-using namespace log4cxx;
-using namespace log4cxx::rolling;
-using namespace log4cxx::helpers;
-using namespace log4cxx::pattern;
-
-IMPLEMENT_LOG4CXX_OBJECT(TimeAndSizeBasedRollingPolicy)
-
-/*!
- * default constructor.
- * initialize member valiables
- * @param void
- * @return void
- */
-TimeAndSizeBasedRollingPolicy::TimeAndSizeBasedRollingPolicy() :
- maxFileSize(DEFAULT_MAX_FILE_SIZE)
-{
-}
-
-/*!
- * maxFileSize getter
- * @param void
- * @return maxFileSize
- */
-size_t TimeAndSizeBasedRollingPolicy::getMaxFileSize()
-{
- return maxFileSize;
-}
-
-/*!
- * maxFileSize setter
- * @param maxFileSize
- * @return void
- */
-void TimeAndSizeBasedRollingPolicy::setMaxFileSize(size_t size)
-{
- maxFileSize = size;
-}
-
-/*!
- * option setter
- * @param option name
- * @param value
- * @return void
- */
-void TimeAndSizeBasedRollingPolicy::setOption(const LogString& option, const LogString& value)
-{
- if (StringHelper::equalsIgnoreCase(option,
- LOG4CXX_STR("MAXFILESIZE"),
- LOG4CXX_STR("maxfilesize"))) {
- maxFileSize = OptionConverter::toFileSize(value, DEFAULT_MAX_FILE_SIZE);
- }
- else {
- StrictTimeBasedRollingPolicy::setOption(option, value);
- }
-}
-
-/*!
- * returns do rollover or not
- * @param appender (not use)
- * @param event (not use)
- * @param filename (not use)
- * @param fileLength
- * @retval true do rollover
- * @retval false not rollover yet
- */
-bool TimeAndSizeBasedRollingPolicy::isTriggeringEvent(
- Appender* appender,
- const log4cxx::spi::LoggingEventPtr& event,
- const LogString& filename,
- size_t fileLength)
-{
-
- return (fileLength >= maxFileSize ||
- StrictTimeBasedRollingPolicy::isTriggeringEvent(appender, event, filename, fileLength));
-}
+/*\r
+ * @file time_and_size_based_rolling_policy.cpp\r
+ * @brief log4cxx's rolling policy class. (time + size)\r
+ *\r
+ * L7VSD: Linux Virtual Server for Layer7 Load Balancing\r
+ * Copyright (C) 2008 NTT COMWARE Corporation.\r
+ *\r
+ * This program is free software; you can redistribute it and/or\r
+ * modify it under the terms of the GNU Lesser General Public\r
+ * License as published by the Free Software Foundation; either\r
+ * version 2.1 of the License, or (at your option) any later version.\r
+ *\r
+ * This program is distributed in the hope that it will be useful,\r
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of\r
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU\r
+ * Lesser General Public License for more details.\r
+ * \r
+ * You should have received a copy of the GNU Lesser General Public\r
+ * License along with this library; if not, write to the Free Software\r
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA\r
+ * 02110-1301 USA\r
+ *\r
+ **********************************************************************/\r
+\r
+#include <log4cxx/logstring.h>\r
+#include <log4cxx/pattern/filedatepatternconverter.h>\r
+#include <log4cxx/helpers/date.h>\r
+#include <log4cxx/rolling/filerenameaction.h>\r
+#include <log4cxx/helpers/loglog.h>\r
+#include <log4cxx/helpers/exception.h>\r
+#include <log4cxx/helpers/stringhelper.h>\r
+#include <log4cxx/helpers/optionconverter.h>\r
+#include <time.h>\r
+#include <boost/lexical_cast.hpp>\r
+#include "time_and_size_based_rolling_policy.h"\r
+\r
+#define DEFAULT_MAX_FILE_SIZE (10 * 1024 * 1024)\r
+\r
+using namespace log4cxx;\r
+using namespace log4cxx::rolling;\r
+using namespace log4cxx::helpers;\r
+using namespace log4cxx::pattern;\r
+\r
+IMPLEMENT_LOG4CXX_OBJECT(TimeAndSizeBasedRollingPolicy)\r
+\r
+/*!\r
+ * default constructor.\r
+ * initialize member valiables\r
+ * @param void\r
+ * @return void\r
+ */\r
+TimeAndSizeBasedRollingPolicy::TimeAndSizeBasedRollingPolicy() :\r
+ maxFileSize(DEFAULT_MAX_FILE_SIZE)\r
+{\r
+}\r
+\r
+/*!\r
+ * maxFileSize getter\r
+ * @param void\r
+ * @return maxFileSize\r
+ */\r
+size_t TimeAndSizeBasedRollingPolicy::getMaxFileSize()\r
+{\r
+ return maxFileSize;\r
+}\r
+\r
+/*!\r
+ * maxFileSize setter\r
+ * @param maxFileSize\r
+ * @return void\r
+ */ \r
+void TimeAndSizeBasedRollingPolicy::setMaxFileSize(size_t size)\r
+{\r
+ maxFileSize = size;\r
+}\r
+\r
+/*!\r
+ * option setter\r
+ * @param option name\r
+ * @param value\r
+ * @return void\r
+ */\r
+void TimeAndSizeBasedRollingPolicy::setOption(const LogString& option, const LogString& value)\r
+{\r
+ if (StringHelper::equalsIgnoreCase(option,\r
+ LOG4CXX_STR("MAXFILESIZE"),\r
+ LOG4CXX_STR("maxfilesize"))) {\r
+ maxFileSize = OptionConverter::toFileSize(value, DEFAULT_MAX_FILE_SIZE);\r
+ }\r
+ else {\r
+ StrictTimeBasedRollingPolicy::setOption(option, value);\r
+ }\r
+}\r
+\r
+/*!\r
+ * returns do rollover or not\r
+ * @param appender (not use)\r
+ * @param event (not use)\r
+ * @param filename (not use)\r
+ * @param fileLength\r
+ * @retval true do rollover\r
+ * @retval false not rollover yet\r
+ */\r
+bool TimeAndSizeBasedRollingPolicy::isTriggeringEvent(\r
+ Appender* appender,\r
+ const log4cxx::spi::LoggingEventPtr& event,\r
+ const LogString& filename,\r
+ size_t fileLength) \r
+{\r
+\r
+ return (fileLength >= maxFileSize || \r
+ StrictTimeBasedRollingPolicy::isTriggeringEvent(appender, event, filename, fileLength));\r
+}\r
-/*
- * @file time_and_size_based_rolling_policy.h
- * @brief log4cxx's rolling policy class. (time + size)
- *
- * L7VSD: Linux Virtual Server for Layer7 Load Balancing
- * Copyright (C) 2008 NTT COMWARE Corporation.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation; either
- * version 2.1 of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this library; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- **********************************************************************/
-
-#ifndef __TIME_AND_SIZE_BASED_ROLLING_POLICY_H__
-#define __TIME_AND_SIZE_BASED_ROLLING_POLICY_H__
-
-#include <log4cxx/portability.h>
-#include "strict_time_based_rolling_policy.h"
-#include "logger_enum.h"
-
-namespace log4cxx {
- namespace rolling {
- /*!
- * log4cxx time and size based rolling policy class.
- * this policy class is delivered from StrictTimeBasedRollingPolicy.
- * so it can size specify in addition to strict time specify.
- */
- class LOG4CXX_EXPORT TimeAndSizeBasedRollingPolicy :
- public StrictTimeBasedRollingPolicy
- {
- DECLARE_LOG4CXX_OBJECT(TimeAndSizeBasedRollingPolicy)
- BEGIN_LOG4CXX_CAST_MAP()
- LOG4CXX_CAST_ENTRY(TimeAndSizeBasedRollingPolicy)
- LOG4CXX_CAST_ENTRY_CHAIN(StrictTimeBasedRollingPolicy)
- END_LOG4CXX_CAST_MAP()
-
- protected:
- //! maximum size of file
- size_t maxFileSize;
-
- public:
- //! default constructor
- TimeAndSizeBasedRollingPolicy();
- //! option setter
- void setOption(const LogString&, const LogString&);
- //! maxFileSize getter
- size_t getMaxFileSize();
- //! maxFileSize setter
- void setMaxFileSize(size_t);
-
- //! returns do rollover or not
- virtual bool isTriggeringEvent(
- Appender* appender,
- const log4cxx::spi::LoggingEventPtr& event,
- const LogString& filename,
- size_t fileLength);
-
- };
- LOG4CXX_PTR_DEF(TimeAndSizeBasedRollingPolicy);
- }
-}
-
-#endif //__TIME_AND_SIZE_BASED_ROLLING_POLICY_H__
-
+/*\r
+ * @file time_and_size_based_rolling_policy.h\r
+ * @brief log4cxx's rolling policy class. (time + size)\r
+ *\r
+ * L7VSD: Linux Virtual Server for Layer7 Load Balancing\r
+ * Copyright (C) 2008 NTT COMWARE Corporation.\r
+ *\r
+ * This program is free software; you can redistribute it and/or\r
+ * modify it under the terms of the GNU Lesser General Public\r
+ * License as published by the Free Software Foundation; either\r
+ * version 2.1 of the License, or (at your option) any later version.\r
+ *\r
+ * This program is distributed in the hope that it will be useful,\r
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of\r
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU\r
+ * Lesser General Public License for more details.\r
+ * \r
+ * You should have received a copy of the GNU Lesser General Public\r
+ * License along with this library; if not, write to the Free Software\r
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA\r
+ * 02110-1301 USA\r
+ *\r
+ **********************************************************************/\r
+\r
+#ifndef __TIME_AND_SIZE_BASED_ROLLING_POLICY_H__\r
+#define __TIME_AND_SIZE_BASED_ROLLING_POLICY_H__\r
+\r
+#include <log4cxx/portability.h>\r
+#include "strict_time_based_rolling_policy.h"\r
+#include "logger_enum.h"\r
+\r
+namespace log4cxx {\r
+ namespace rolling {\r
+ /*!\r
+ * log4cxx time and size based rolling policy class.\r
+ * this policy class is delivered from StrictTimeBasedRollingPolicy.\r
+ * so it can size specify in addition to strict time specify.\r
+ */\r
+ class LOG4CXX_EXPORT TimeAndSizeBasedRollingPolicy :\r
+ public StrictTimeBasedRollingPolicy\r
+ {\r
+ DECLARE_LOG4CXX_OBJECT(TimeAndSizeBasedRollingPolicy)\r
+ BEGIN_LOG4CXX_CAST_MAP()\r
+ LOG4CXX_CAST_ENTRY(TimeAndSizeBasedRollingPolicy)\r
+ LOG4CXX_CAST_ENTRY_CHAIN(StrictTimeBasedRollingPolicy)\r
+ END_LOG4CXX_CAST_MAP()\r
+\r
+ protected:\r
+ //! maximum size of file\r
+ size_t maxFileSize;\r
+ \r
+ public:\r
+ //! default constructor\r
+ TimeAndSizeBasedRollingPolicy();\r
+ //! option setter\r
+ void setOption(const LogString&, const LogString&);\r
+ //! maxFileSize getter\r
+ size_t getMaxFileSize();\r
+ //! maxFileSize setter\r
+ void setMaxFileSize(size_t);\r
+ \r
+ //! returns do rollover or not\r
+ virtual bool isTriggeringEvent(\r
+ Appender* appender,\r
+ const log4cxx::spi::LoggingEventPtr& event,\r
+ const LogString& filename,\r
+ size_t fileLength);\r
+ \r
+ };\r
+ LOG4CXX_PTR_DEF(TimeAndSizeBasedRollingPolicy);\r
+ }\r
+}\r
+\r
+#endif //__TIME_AND_SIZE_BASED_ROLLING_POLICY_H__\r
+\r
--- /dev/null
+# ltmain.sh - Provide generalized library-building support services.
+# NOTE: Changing this file will not affect anything until you rerun configure.
+#
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+basename="s,^.*/,,g"
+
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath="$0"
+
+# The name of this program:
+progname=`echo "$progpath" | $SED $basename`
+modename="$progname"
+
+# Global variables:
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+
+PROGRAM=ltmain.sh
+PACKAGE=libtool
+VERSION=1.5.22
+TIMESTAMP=" (1.1220.2.365 2005/12/18 22:14:06)"
+
+# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
+fi
+
+# Check that we have a working $echo.
+if test "X$1" = X--no-reexec; then
+ # Discard the --no-reexec flag, and continue.
+ shift
+elif test "X$1" = X--fallback-echo; then
+ # Avoid inline document here, it may be left over
+ :
+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
+ # Yippee, $echo works!
+ :
+else
+ # Restart under the correct shell, and then maybe $echo will work.
+ exec $SHELL "$progpath" --no-reexec ${1+"$@"}
+fi
+
+if test "X$1" = X--fallback-echo; then
+ # used as fallback echo
+ shift
+ cat <<EOF
+$*
+EOF
+ exit $EXIT_SUCCESS
+fi
+
+default_mode=
+help="Try \`$progname --help' for more information."
+magic="%%%MAGIC variable%%%"
+mkdir="mkdir"
+mv="mv -f"
+rm="rm -f"
+
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed="${SED}"' -e 1s/^X//'
+sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+ SP2NL='tr \040 \012'
+ NL2SP='tr \015\012 \040\040'
+ ;;
+ *) # EBCDIC based system
+ SP2NL='tr \100 \n'
+ NL2SP='tr \r\n \100\100'
+ ;;
+esac
+
+# NLS nuisances.
+# Only set LANG and LC_ALL to C if already set.
+# These must not be set unconditionally because not all systems understand
+# e.g. LANG=C (notably SCO).
+# We save the old values to restore during execute mode.
+for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+do
+ eval "if test \"\${$lt_var+set}\" = set; then
+ save_$lt_var=\$$lt_var
+ $lt_var=C
+ export $lt_var
+ fi"
+done
+
+# Make sure IFS has a sensible default
+lt_nl='
+'
+IFS=" $lt_nl"
+
+if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+ $echo "$modename: not configured to build any kind of library" 1>&2
+ $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
+ exit $EXIT_FAILURE
+fi
+
+# Global variables.
+mode=$default_mode
+nonopt=
+prev=
+prevopt=
+run=
+show="$echo"
+show_help=
+execute_dlfiles=
+duplicate_deps=no
+preserve_args=
+lo2o="s/\\.lo\$/.${objext}/"
+o2lo="s/\\.${objext}\$/.lo/"
+extracted_archives=
+extracted_serial=0
+
+#####################################
+# Shell function definitions:
+# This seems to be the best place for them
+
+# func_mktempdir [string]
+# Make a temporary directory that won't clash with other running
+# libtool processes, and avoids race conditions if possible. If
+# given, STRING is the basename for that directory.
+func_mktempdir ()
+{
+ my_template="${TMPDIR-/tmp}/${1-$progname}"
+
+ if test "$run" = ":"; then
+ # Return a directory name, but don't create it in dry-run mode
+ my_tmpdir="${my_template}-$$"
+ else
+
+ # If mktemp works, use that first and foremost
+ my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
+
+ if test ! -d "$my_tmpdir"; then
+ # Failing that, at least try and use $RANDOM to avoid a race
+ my_tmpdir="${my_template}-${RANDOM-0}$$"
+
+ save_mktempdir_umask=`umask`
+ umask 0077
+ $mkdir "$my_tmpdir"
+ umask $save_mktempdir_umask
+ fi
+
+ # If we're not in dry-run mode, bomb out on failure
+ test -d "$my_tmpdir" || {
+ $echo "cannot create temporary directory \`$my_tmpdir'" 1>&2
+ exit $EXIT_FAILURE
+ }
+ fi
+
+ $echo "X$my_tmpdir" | $Xsed
+}
+
+
+# func_win32_libid arg
+# return the library type of file 'arg'
+#
+# Need a lot of goo to handle *both* DLLs and import libs
+# Has to be a shell function in order to 'eat' the argument
+# that is supplied when $file_magic_command is called.
+func_win32_libid ()
+{
+ win32_libid_type="unknown"
+ win32_fileres=`file -L $1 2>/dev/null`
+ case $win32_fileres in
+ *ar\ archive\ import\ library*) # definitely import
+ win32_libid_type="x86 archive import"
+ ;;
+ *ar\ archive*) # could be an import, or static
+ if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \
+ $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
+ win32_nmres=`eval $NM -f posix -A $1 | \
+ $SED -n -e '1,100{/ I /{s,.*,import,;p;q;};}'`
+ case $win32_nmres in
+ import*) win32_libid_type="x86 archive import";;
+ *) win32_libid_type="x86 archive static";;
+ esac
+ fi
+ ;;
+ *DLL*)
+ win32_libid_type="x86 DLL"
+ ;;
+ *executable*) # but shell scripts are "executable" too...
+ case $win32_fileres in
+ *MS\ Windows\ PE\ Intel*)
+ win32_libid_type="x86 DLL"
+ ;;
+ esac
+ ;;
+ esac
+ $echo $win32_libid_type
+}
+
+
+# func_infer_tag arg
+# Infer tagged configuration to use if any are available and
+# if one wasn't chosen via the "--tag" command line option.
+# Only attempt this if the compiler in the base compile
+# command doesn't match the default compiler.
+# arg is usually of the form 'gcc ...'
+func_infer_tag ()
+{
+ if test -n "$available_tags" && test -z "$tagname"; then
+ CC_quoted=
+ for arg in $CC; do
+ case $arg in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ arg="\"$arg\""
+ ;;
+ esac
+ CC_quoted="$CC_quoted $arg"
+ done
+ case $@ in
+ # Blanks in the command may have been stripped by the calling shell,
+ # but not from the CC environment variable when configure was run.
+ " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;;
+ # Blanks at the start of $base_compile will cause this to fail
+ # if we don't check for them as well.
+ *)
+ for z in $available_tags; do
+ if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
+ # Evaluate the configuration.
+ eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
+ CC_quoted=
+ for arg in $CC; do
+ # Double-quote args containing other shell metacharacters.
+ case $arg in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ arg="\"$arg\""
+ ;;
+ esac
+ CC_quoted="$CC_quoted $arg"
+ done
+ case "$@ " in
+ " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*)
+ # The compiler in the base compile command matches
+ # the one in the tagged configuration.
+ # Assume this is the tagged configuration we want.
+ tagname=$z
+ break
+ ;;
+ esac
+ fi
+ done
+ # If $tagname still isn't set, then no tagged configuration
+ # was found and let the user know that the "--tag" command
+ # line option must be used.
+ if test -z "$tagname"; then
+ $echo "$modename: unable to infer tagged configuration"
+ $echo "$modename: specify a tag with \`--tag'" 1>&2
+ exit $EXIT_FAILURE
+# else
+# $echo "$modename: using $tagname tagged configuration"
+ fi
+ ;;
+ esac
+ fi
+}
+
+
+# func_extract_an_archive dir oldlib
+func_extract_an_archive ()
+{
+ f_ex_an_ar_dir="$1"; shift
+ f_ex_an_ar_oldlib="$1"
+
+ $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)"
+ $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $?
+ if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
+ :
+ else
+ $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2
+ exit $EXIT_FAILURE
+ fi
+}
+
+# func_extract_archives gentop oldlib ...
+func_extract_archives ()
+{
+ my_gentop="$1"; shift
+ my_oldlibs=${1+"$@"}
+ my_oldobjs=""
+ my_xlib=""
+ my_xabs=""
+ my_xdir=""
+ my_status=""
+
+ $show "${rm}r $my_gentop"
+ $run ${rm}r "$my_gentop"
+ $show "$mkdir $my_gentop"
+ $run $mkdir "$my_gentop"
+ my_status=$?
+ if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then
+ exit $my_status
+ fi
+
+ for my_xlib in $my_oldlibs; do
+ # Extract the objects.
+ case $my_xlib in
+ [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
+ *) my_xabs=`pwd`"/$my_xlib" ;;
+ esac
+ my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'`
+ my_xlib_u=$my_xlib
+ while :; do
+ case " $extracted_archives " in
+ *" $my_xlib_u "*)
+ extracted_serial=`expr $extracted_serial + 1`
+ my_xlib_u=lt$extracted_serial-$my_xlib ;;
+ *) break ;;
+ esac
+ done
+ extracted_archives="$extracted_archives $my_xlib_u"
+ my_xdir="$my_gentop/$my_xlib_u"
+
+ $show "${rm}r $my_xdir"
+ $run ${rm}r "$my_xdir"
+ $show "$mkdir $my_xdir"
+ $run $mkdir "$my_xdir"
+ exit_status=$?
+ if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then
+ exit $exit_status
+ fi
+ case $host in
+ *-darwin*)
+ $show "Extracting $my_xabs"
+ # Do not bother doing anything if just a dry run
+ if test -z "$run"; then
+ darwin_orig_dir=`pwd`
+ cd $my_xdir || exit $?
+ darwin_archive=$my_xabs
+ darwin_curdir=`pwd`
+ darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'`
+ darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null`
+ if test -n "$darwin_arches"; then
+ darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'`
+ darwin_arch=
+ $show "$darwin_base_archive has multiple architectures $darwin_arches"
+ for darwin_arch in $darwin_arches ; do
+ mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+ lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
+ cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+ func_extract_an_archive "`pwd`" "${darwin_base_archive}"
+ cd "$darwin_curdir"
+ $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
+ done # $darwin_arches
+ ## Okay now we have a bunch of thin objects, gotta fatten them up :)
+ darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP`
+ darwin_file=
+ darwin_files=
+ for darwin_file in $darwin_filelist; do
+ darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
+ lipo -create -output "$darwin_file" $darwin_files
+ done # $darwin_filelist
+ ${rm}r unfat-$$
+ cd "$darwin_orig_dir"
+ else
+ cd "$darwin_orig_dir"
+ func_extract_an_archive "$my_xdir" "$my_xabs"
+ fi # $darwin_arches
+ fi # $run
+ ;;
+ *)
+ func_extract_an_archive "$my_xdir" "$my_xabs"
+ ;;
+ esac
+ my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
+ done
+ func_extract_archives_result="$my_oldobjs"
+}
+# End of Shell function definitions
+#####################################
+
+# Darwin sucks
+eval std_shrext=\"$shrext_cmds\"
+
+disable_libs=no
+
+# Parse our command line options once, thoroughly.
+while test "$#" -gt 0
+do
+ arg="$1"
+ shift
+
+ case $arg in
+ -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
+ *) optarg= ;;
+ esac
+
+ # If the previous option needs an argument, assign it.
+ if test -n "$prev"; then
+ case $prev in
+ execute_dlfiles)
+ execute_dlfiles="$execute_dlfiles $arg"
+ ;;
+ tag)
+ tagname="$arg"
+ preserve_args="${preserve_args}=$arg"
+
+ # Check whether tagname contains only valid characters
+ case $tagname in
+ *[!-_A-Za-z0-9,/]*)
+ $echo "$progname: invalid tag name: $tagname" 1>&2
+ exit $EXIT_FAILURE
+ ;;
+ esac
+
+ case $tagname in
+ CC)
+ # Don't test for the "default" C tag, as we know, it's there, but
+ # not specially marked.
+ ;;
+ *)
+ if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then
+ taglist="$taglist $tagname"
+ # Evaluate the configuration.
+ eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`"
+ else
+ $echo "$progname: ignoring unknown tag $tagname" 1>&2
+ fi
+ ;;
+ esac
+ ;;
+ *)
+ eval "$prev=\$arg"
+ ;;
+ esac
+
+ prev=
+ prevopt=
+ continue
+ fi
+
+ # Have we seen a non-optional argument yet?
+ case $arg in
+ --help)
+ show_help=yes
+ ;;
+
+ --version)
+ $echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
+ $echo
+ $echo "Copyright (C) 2005 Free Software Foundation, Inc."
+ $echo "This is free software; see the source for copying conditions. There is NO"
+ $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+ exit $?
+ ;;
+
+ --config)
+ ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath
+ # Now print the configurations for the tags.
+ for tagname in $taglist; do
+ ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath"
+ done
+ exit $?
+ ;;
+
+ --debug)
+ $echo "$progname: enabling shell trace mode"
+ set -x
+ preserve_args="$preserve_args $arg"
+ ;;
+
+ --dry-run | -n)
+ run=:
+ ;;
+
+ --features)
+ $echo "host: $host"
+ if test "$build_libtool_libs" = yes; then
+ $echo "enable shared libraries"
+ else
+ $echo "disable shared libraries"
+ fi
+ if test "$build_old_libs" = yes; then
+ $echo "enable static libraries"
+ else
+ $echo "disable static libraries"
+ fi
+ exit $?
+ ;;
+
+ --finish) mode="finish" ;;
+
+ --mode) prevopt="--mode" prev=mode ;;
+ --mode=*) mode="$optarg" ;;
+
+ --preserve-dup-deps) duplicate_deps="yes" ;;
+
+ --quiet | --silent)
+ show=:
+ preserve_args="$preserve_args $arg"
+ ;;
+
+ --tag)
+ prevopt="--tag"
+ prev=tag
+ preserve_args="$preserve_args --tag"
+ ;;
+ --tag=*)
+ set tag "$optarg" ${1+"$@"}
+ shift
+ prev=tag
+ preserve_args="$preserve_args --tag"
+ ;;
+
+ -dlopen)
+ prevopt="-dlopen"
+ prev=execute_dlfiles
+ ;;
+
+ -*)
+ $echo "$modename: unrecognized option \`$arg'" 1>&2
+ $echo "$help" 1>&2
+ exit $EXIT_FAILURE
+ ;;
+
+ *)
+ nonopt="$arg"
+ break
+ ;;
+ esac
+done
+
+if test -n "$prevopt"; then
+ $echo "$modename: option \`$prevopt' requires an argument" 1>&2
+ $echo "$help" 1>&2
+ exit $EXIT_FAILURE
+fi
+
+case $disable_libs in
+no)
+ ;;
+shared)
+ build_libtool_libs=no
+ build_old_libs=yes
+ ;;
+static)
+ build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
+ ;;
+esac
+
+# If this variable is set in any of the actions, the command in it
+# will be execed at the end. This prevents here-documents from being
+# left over by shells.
+exec_cmd=
+
+if test -z "$show_help"; then
+
+ # Infer the operation mode.
+ if test -z "$mode"; then
+ $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2
+ $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2
+ case $nonopt in
+ *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*)
+ mode=link
+ for arg
+ do
+ case $arg in
+ -c)
+ mode=compile
+ break
+ ;;
+ esac
+ done
+ ;;
+ *db | *dbx | *strace | *truss)
+ mode=execute
+ ;;
+ *install*|cp|mv)
+ mode=install
+ ;;
+ *rm)
+ mode=uninstall
+ ;;
+ *)
+ # If we have no mode, but dlfiles were specified, then do execute mode.
+ test -n "$execute_dlfiles" && mode=execute
+
+ # Just use the default operation mode.
+ if test -z "$mode"; then
+ if test -n "$nonopt"; then
+ $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2
+ else
+ $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2
+ fi
+ fi
+ ;;
+ esac
+ fi
+
+ # Only execute mode is allowed to have -dlopen flags.
+ if test -n "$execute_dlfiles" && test "$mode" != execute; then
+ $echo "$modename: unrecognized option \`-dlopen'" 1>&2
+ $echo "$help" 1>&2
+ exit $EXIT_FAILURE
+ fi
+
+ # Change the help message to a mode-specific one.
+ generic_help="$help"
+ help="Try \`$modename --help --mode=$mode' for more information."
+
+ # These modes are in order of execution frequency so that they run quickly.
+ case $mode in
+ # libtool compile mode
+ compile)
+ modename="$modename: compile"
+ # Get the compilation command and the source file.
+ base_compile=
+ srcfile="$nonopt" # always keep a non-empty value in "srcfile"
+ suppress_opt=yes
+ suppress_output=
+ arg_mode=normal
+ libobj=
+ later=
+
+ for arg
+ do
+ case $arg_mode in
+ arg )
+ # do not "continue". Instead, add this to base_compile
+ lastarg="$arg"
+ arg_mode=normal
+ ;;
+
+ target )
+ libobj="$arg"
+ arg_mode=normal
+ continue
+ ;;
+
+ normal )
+ # Accept any command-line options.
+ case $arg in
+ -o)
+ if test -n "$libobj" ; then
+ $echo "$modename: you cannot specify \`-o' more than once" 1>&2
+ exit $EXIT_FAILURE
+ fi
+ arg_mode=target
+ continue
+ ;;
+
+ -static | -prefer-pic | -prefer-non-pic)
+ later="$later $arg"
+ continue
+ ;;
+
+ -no-suppress)
+ suppress_opt=no
+ continue
+ ;;
+
+ -Xcompiler)
+ arg_mode=arg # the next one goes into the "base_compile" arg list
+ continue # The current "srcfile" will either be retained or
+ ;; # replaced later. I would guess that would be a bug.
+
+ -Wc,*)
+ args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
+ lastarg=
+ save_ifs="$IFS"; IFS=','
+ for arg in $args; do
+ IFS="$save_ifs"
+
+ # Double-quote args containing other shell metacharacters.
+ # Many Bourne shells cannot handle close brackets correctly
+ # in scan sets, so we specify it separately.
+ case $arg in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ arg="\"$arg\""
+ ;;
+ esac
+ lastarg="$lastarg $arg"
+ done
+ IFS="$save_ifs"
+ lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"`
+
+ # Add the arguments to base_compile.
+ base_compile="$base_compile $lastarg"
+ continue
+ ;;
+
+ * )
+ # Accept the current argument as the source file.
+ # The previous "srcfile" becomes the current argument.
+ #
+ lastarg="$srcfile"
+ srcfile="$arg"
+ ;;
+ esac # case $arg
+ ;;
+ esac # case $arg_mode
+
+ # Aesthetically quote the previous argument.
+ lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
+
+ case $lastarg in
+ # Double-quote args containing other shell metacharacters.
+ # Many Bourne shells cannot handle close brackets correctly
+ # in scan sets, and some SunOS ksh mistreat backslash-escaping
+ # in scan sets (worked around with variable expansion),
+ # and furthermore cannot handle '|' '&' '(' ')' in scan sets
+ # at all, so we specify them separately.
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ lastarg="\"$lastarg\""
+ ;;
+ esac
+
+ base_compile="$base_compile $lastarg"
+ done # for arg
+
+ case $arg_mode in
+ arg)
+ $echo "$modename: you must specify an argument for -Xcompile"
+ exit $EXIT_FAILURE
+ ;;
+ target)
+ $echo "$modename: you must specify a target with \`-o'" 1>&2
+ exit $EXIT_FAILURE
+ ;;
+ *)
+ # Get the name of the library object.
+ [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
+ ;;
+ esac
+
+ # Recognize several different file suffixes.
+ # If the user specifies -o file.o, it is replaced with file.lo
+ xform='[cCFSifmso]'
+ case $libobj in
+ *.ada) xform=ada ;;
+ *.adb) xform=adb ;;
+ *.ads) xform=ads ;;
+ *.asm) xform=asm ;;
+ *.c++) xform=c++ ;;
+ *.cc) xform=cc ;;
+ *.ii) xform=ii ;;
+ *.class) xform=class ;;
+ *.cpp) xform=cpp ;;
+ *.cxx) xform=cxx ;;
+ *.f90) xform=f90 ;;
+ *.for) xform=for ;;
+ *.java) xform=java ;;
+ *.obj) xform=obj ;;
+ esac
+
+ libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
+
+ case $libobj in
+ *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
+ *)
+ $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
+ exit $EXIT_FAILURE
+ ;;
+ esac
+
+ func_infer_tag $base_compile
+
+ for arg in $later; do
+ case $arg in
+ -static)
+ build_old_libs=yes
+ continue
+ ;;
+
+ -prefer-pic)
+ pic_mode=yes
+ continue
+ ;;
+
+ -prefer-non-pic)
+ pic_mode=no
+ continue
+ ;;
+ esac
+ done
+
+ qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"`
+ case $qlibobj in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ qlibobj="\"$qlibobj\"" ;;
+ esac
+ test "X$libobj" != "X$qlibobj" \
+ && $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' &()|`$[]' \
+ && $echo "$modename: libobj name \`$libobj' may not contain shell special characters."
+ objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
+ xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
+ if test "X$xdir" = "X$obj"; then
+ xdir=
+ else
+ xdir=$xdir/
+ fi
+ lobj=${xdir}$objdir/$objname
+
+ if test -z "$base_compile"; then
+ $echo "$modename: you must specify a compilation command" 1>&2
+ $echo "$help" 1>&2
+ exit $EXIT_FAILURE
+ fi
+
+ # Delete any leftover library objects.
+ if test "$build_old_libs" = yes; then
+ removelist="$obj $lobj $libobj ${libobj}T"
+ else
+ removelist="$lobj $libobj ${libobj}T"
+ fi
+
+ $run $rm $removelist
+ trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
+
+ # On Cygwin there's no "real" PIC flag so we must build both object types
+ case $host_os in
+ cygwin* | mingw* | pw32* | os2*)
+ pic_mode=default
+ ;;
+ esac
+ if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
+ # non-PIC code in shared libraries is not supported
+ pic_mode=default
+ fi
+
+ # Calculate the filename of the output object if compiler does
+ # not support -o with -c
+ if test "$compiler_c_o" = no; then
+ output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
+ lockfile="$output_obj.lock"
+ removelist="$removelist $output_obj $lockfile"
+ trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
+ else
+ output_obj=
+ need_locks=no
+ lockfile=
+ fi
+
+ # Lock this critical section if it is needed
+ # We use this script file to make the link, it avoids creating a new file
+ if test "$need_locks" = yes; then
+ until $run ln "$progpath" "$lockfile" 2>/dev/null; do
+ $show "Waiting for $lockfile to be removed"
+ sleep 2
+ done
+ elif test "$need_locks" = warn; then
+ if test -f "$lockfile"; then
+ $echo "\
+*** ERROR, $lockfile exists and contains:
+`cat $lockfile 2>/dev/null`
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together. If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+ $run $rm $removelist
+ exit $EXIT_FAILURE
+ fi
+ $echo "$srcfile" > "$lockfile"
+ fi
+
+ if test -n "$fix_srcfile_path"; then
+ eval srcfile=\"$fix_srcfile_path\"
+ fi
+ qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"`
+ case $qsrcfile in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ qsrcfile="\"$qsrcfile\"" ;;
+ esac
+
+ $run $rm "$libobj" "${libobj}T"
+
+ # Create a libtool object file (analogous to a ".la" file),
+ # but don't create it if we're doing a dry run.
+ test -z "$run" && cat > ${libobj}T <<EOF
+# $libobj - a libtool object file
+# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# Name of the PIC object.
+EOF
+
+ # Only build a PIC object if we are building libtool libraries.
+ if test "$build_libtool_libs" = yes; then
+ # Without this assignment, base_compile gets emptied.
+ fbsd_hideous_sh_bug=$base_compile
+
+ if test "$pic_mode" != no; then
+ command="$base_compile $qsrcfile $pic_flag"
+ else
+ # Don't build PIC code
+ command="$base_compile $qsrcfile"
+ fi
+
+ if test ! -d "${xdir}$objdir"; then
+ $show "$mkdir ${xdir}$objdir"
+ $run $mkdir ${xdir}$objdir
+ exit_status=$?
+ if test "$exit_status" -ne 0 && test ! -d "${xdir}$objdir"; then
+ exit $exit_status
+ fi
+ fi
+
+ if test -z "$output_obj"; then
+ # Place PIC objects in $objdir
+ command="$command -o $lobj"
+ fi
+
+ $run $rm "$lobj" "$output_obj"
+
+ $show "$command"
+ if $run eval "$command"; then :
+ else
+ test -n "$output_obj" && $run $rm $removelist
+ exit $EXIT_FAILURE
+ fi
+
+ if test "$need_locks" = warn &&
+ test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+ $echo "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together. If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+ $run $rm $removelist
+ exit $EXIT_FAILURE
+ fi
+
+ # Just move the object if needed, then go on to compile the next one
+ if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
+ $show "$mv $output_obj $lobj"
+ if $run $mv $output_obj $lobj; then :
+ else
+ error=$?
+ $run $rm $removelist
+ exit $error
+ fi
+ fi
+
+ # Append the name of the PIC object to the libtool object file.
+ test -z "$run" && cat >> ${libobj}T <<EOF
+pic_object='$objdir/$objname'
+
+EOF
+
+ # Allow error messages only from the first compilation.
+ if test "$suppress_opt" = yes; then
+ suppress_output=' >/dev/null 2>&1'
+ fi
+ else
+ # No PIC object so indicate it doesn't exist in the libtool
+ # object file.
+ test -z "$run" && cat >> ${libobj}T <<EOF
+pic_object=none
+
+EOF
+ fi
+
+ # Only build a position-dependent object if we build old libraries.
+ if test "$build_old_libs" = yes; then
+ if test "$pic_mode" != yes; then
+ # Don't build PIC code
+ command="$base_compile $qsrcfile"
+ else
+ command="$base_compile $qsrcfile $pic_flag"
+ fi
+ if test "$compiler_c_o" = yes; then
+ command="$command -o $obj"
+ fi
+
+ # Suppress compiler output if we already did a PIC compilation.
+ command="$command$suppress_output"
+ $run $rm "$obj" "$output_obj"
+ $show "$command"
+ if $run eval "$command"; then :
+ else
+ $run $rm $removelist
+ exit $EXIT_FAILURE
+ fi
+
+ if test "$need_locks" = warn &&
+ test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+ $echo "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together. If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+ $run $rm $removelist
+ exit $EXIT_FAILURE
+ fi
+
+ # Just move the object if needed
+ if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
+ $show "$mv $output_obj $obj"
+ if $run $mv $output_obj $obj; then :
+ else
+ error=$?
+ $run $rm $removelist
+ exit $error
+ fi
+ fi
+
+ # Append the name of the non-PIC object the libtool object file.
+ # Only append if the libtool object file exists.
+ test -z "$run" && cat >> ${libobj}T <<EOF
+# Name of the non-PIC object.
+non_pic_object='$objname'
+
+EOF
+ else
+ # Append the name of the non-PIC object the libtool object file.
+ # Only append if the libtool object file exists.
+ test -z "$run" && cat >> ${libobj}T <<EOF
+# Name of the non-PIC object.
+non_pic_object=none
+
+EOF
+ fi
+
+ $run $mv "${libobj}T" "${libobj}"
+
+ # Unlock the critical section if it was locked
+ if test "$need_locks" != no; then
+ $run $rm "$lockfile"
+ fi
+
+ exit $EXIT_SUCCESS
+ ;;
+
+ # libtool link mode
+ link | relink)
+ modename="$modename: link"
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+ # It is impossible to link a dll without this setting, and
+ # we shouldn't force the makefile maintainer to figure out
+ # which system we are compiling for in order to pass an extra
+ # flag for every libtool invocation.
+ # allow_undefined=no
+
+ # FIXME: Unfortunately, there are problems with the above when trying
+ # to make a dll which has undefined symbols, in which case not
+ # even a static library is built. For now, we need to specify
+ # -no-undefined on the libtool link line when we can be certain
+ # that all symbols are satisfied, otherwise we get a static library.
+ allow_undefined=yes
+ ;;
+ *)
+ allow_undefined=yes
+ ;;
+ esac
+ libtool_args="$nonopt"
+ base_compile="$nonopt $@"
+ compile_command="$nonopt"
+ finalize_command="$nonopt"
+
+ compile_rpath=
+ finalize_rpath=
+ compile_shlibpath=
+ finalize_shlibpath=
+ convenience=
+ old_convenience=
+ deplibs=
+ old_deplibs=
+ compiler_flags=
+ linker_flags=
+ dllsearchpath=
+ lib_search_path=`pwd`
+ inst_prefix_dir=
+
+ avoid_version=no
+ dlfiles=
+ dlprefiles=
+ dlself=no
+ export_dynamic=no
+ export_symbols=
+ export_symbols_regex=
+ generated=
+ libobjs=
+ ltlibs=
+ module=no
+ no_install=no
+ objs=
+ non_pic_objects=
+ notinst_path= # paths that contain not-installed libtool libraries
+ precious_files_regex=
+ prefer_static_libs=no
+ preload=no
+ prev=
+ prevarg=
+ release=
+ rpath=
+ xrpath=
+ perm_rpath=
+ temp_rpath=
+ thread_safe=no
+ vinfo=
+ vinfo_number=no
+
+ func_infer_tag $base_compile
+
+ # We need to know -static, to get the right output filenames.
+ for arg
+ do
+ case $arg in
+ -all-static | -static | -static-libtool-libs)
+ case $arg in
+ -all-static)
+ if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
+ $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
+ fi
+ if test -n "$link_static_flag"; then
+ dlopen_self=$dlopen_self_static
+ fi
+ prefer_static_libs=yes
+ ;;
+ -static)
+ if test -z "$pic_flag" && test -n "$link_static_flag"; then
+ dlopen_self=$dlopen_self_static
+ fi
+ prefer_static_libs=built
+ ;;
+ -static-libtool-libs)
+ if test -z "$pic_flag" && test -n "$link_static_flag"; then
+ dlopen_self=$dlopen_self_static
+ fi
+ prefer_static_libs=yes
+ ;;
+ esac
+ build_libtool_libs=no
+ build_old_libs=yes
+ break
+ ;;
+ esac
+ done
+
+ # See if our shared archives depend on static archives.
+ test -n "$old_archive_from_new_cmds" && build_old_libs=yes
+
+ # Go through the arguments, transforming them on the way.
+ while test "$#" -gt 0; do
+ arg="$1"
+ shift
+ case $arg in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test
+ ;;
+ *) qarg=$arg ;;
+ esac
+ libtool_args="$libtool_args $qarg"
+
+ # If the previous option needs an argument, assign it.
+ if test -n "$prev"; then
+ case $prev in
+ output)
+ compile_command="$compile_command @OUTPUT@"
+ finalize_command="$finalize_command @OUTPUT@"
+ ;;
+ esac
+
+ case $prev in
+ dlfiles|dlprefiles)
+ if test "$preload" = no; then
+ # Add the symbol object into the linking commands.
+ compile_command="$compile_command @SYMFILE@"
+ finalize_command="$finalize_command @SYMFILE@"
+ preload=yes
+ fi
+ case $arg in
+ *.la | *.lo) ;; # We handle these cases below.
+ force)
+ if test "$dlself" = no; then
+ dlself=needless
+ export_dynamic=yes
+ fi
+ prev=
+ continue
+ ;;
+ self)
+ if test "$prev" = dlprefiles; then
+ dlself=yes
+ elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
+ dlself=yes
+ else
+ dlself=needless
+ export_dynamic=yes
+ fi
+ prev=
+ continue
+ ;;
+ *)
+ if test "$prev" = dlfiles; then
+ dlfiles="$dlfiles $arg"
+ else
+ dlprefiles="$dlprefiles $arg"
+ fi
+ prev=
+ continue
+ ;;
+ esac
+ ;;
+ expsyms)
+ export_symbols="$arg"
+ if test ! -f "$arg"; then
+ $echo "$modename: symbol file \`$arg' does not exist"
+ exit $EXIT_FAILURE
+ fi
+ prev=
+ continue
+ ;;
+ expsyms_regex)
+ export_symbols_regex="$arg"
+ prev=
+ continue
+ ;;
+ inst_prefix)
+ inst_prefix_dir="$arg"
+ prev=
+ continue
+ ;;
+ precious_regex)
+ precious_files_regex="$arg"
+ prev=
+ continue
+ ;;
+ release)
+ release="-$arg"
+ prev=
+ continue
+ ;;
+ objectlist)
+ if test -f "$arg"; then
+ save_arg=$arg
+ moreargs=
+ for fil in `cat $save_arg`
+ do
+# moreargs="$moreargs $fil"
+ arg=$fil
+ # A libtool-controlled object.
+
+ # Check to see that this really is a libtool object.
+ if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+ pic_object=
+ non_pic_object=
+
+ # Read the .lo file
+ # If there is no directory component, then add one.
+ case $arg in
+ */* | *\\*) . $arg ;;
+ *) . ./$arg ;;
+ esac
+
+ if test -z "$pic_object" || \
+ test -z "$non_pic_object" ||
+ test "$pic_object" = none && \
+ test "$non_pic_object" = none; then
+ $echo "$modename: cannot find name of object for \`$arg'" 1>&2
+ exit $EXIT_FAILURE
+ fi
+
+ # Extract subdirectory from the argument.
+ xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+ if test "X$xdir" = "X$arg"; then
+ xdir=
+ else
+ xdir="$xdir/"
+ fi
+
+ if test "$pic_object" != none; then
+ # Prepend the subdirectory the object is found in.
+ pic_object="$xdir$pic_object"
+
+ if test "$prev" = dlfiles; then
+ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+ dlfiles="$dlfiles $pic_object"
+ prev=
+ continue
+ else
+ # If libtool objects are unsupported, then we need to preload.
+ prev=dlprefiles
+ fi
+ fi
+
+ # CHECK ME: I think I busted this. -Ossama
+ if test "$prev" = dlprefiles; then
+ # Preload the old-style object.
+ dlprefiles="$dlprefiles $pic_object"
+ prev=
+ fi
+
+ # A PIC object.
+ libobjs="$libobjs $pic_object"
+ arg="$pic_object"
+ fi
+
+ # Non-PIC object.
+ if test "$non_pic_object" != none; then
+ # Prepend the subdirectory the object is found in.
+ non_pic_object="$xdir$non_pic_object"
+
+ # A standard non-PIC object
+ non_pic_objects="$non_pic_objects $non_pic_object"
+ if test -z "$pic_object" || test "$pic_object" = none ; then
+ arg="$non_pic_object"
+ fi
+ else
+ # If the PIC object exists, use it instead.
+ # $xdir was prepended to $pic_object above.
+ non_pic_object="$pic_object"
+ non_pic_objects="$non_pic_objects $non_pic_object"
+ fi
+ else
+ # Only an error if not doing a dry-run.
+ if test -z "$run"; then
+ $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
+ exit $EXIT_FAILURE
+ else
+ # Dry-run case.
+
+ # Extract subdirectory from the argument.
+ xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+ if test "X$xdir" = "X$arg"; then
+ xdir=
+ else
+ xdir="$xdir/"
+ fi
+
+ pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
+ non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
+ libobjs="$libobjs $pic_object"
+ non_pic_objects="$non_pic_objects $non_pic_object"
+ fi
+ fi
+ done
+ else
+ $echo "$modename: link input file \`$save_arg' does not exist"
+ exit $EXIT_FAILURE
+ fi
+ arg=$save_arg
+ prev=
+ continue
+ ;;
+ rpath | xrpath)
+ # We need an absolute path.
+ case $arg in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ $echo "$modename: only absolute run-paths are allowed" 1>&2
+ exit $EXIT_FAILURE
+ ;;
+ esac
+ if test "$prev" = rpath; then
+ case "$rpath " in
+ *" $arg "*) ;;
+ *) rpath="$rpath $arg" ;;
+ esac
+ else
+ case "$xrpath " in
+ *" $arg "*) ;;
+ *) xrpath="$xrpath $arg" ;;
+ esac
+ fi
+ prev=
+ continue
+ ;;
+ xcompiler)
+ compiler_flags="$compiler_flags $qarg"
+ prev=
+ compile_command="$compile_command $qarg"
+ finalize_command="$finalize_command $qarg"
+ continue
+ ;;
+ xlinker)
+ linker_flags="$linker_flags $qarg"
+ compiler_flags="$compiler_flags $wl$qarg"
+ prev=
+ compile_command="$compile_command $wl$qarg"
+ finalize_command="$finalize_command $wl$qarg"
+ continue
+ ;;
+ xcclinker)
+ linker_flags="$linker_flags $qarg"
+ compiler_flags="$compiler_flags $qarg"
+ prev=
+ compile_command="$compile_command $qarg"
+ finalize_command="$finalize_command $qarg"
+ continue
+ ;;
+ shrext)
+ shrext_cmds="$arg"
+ prev=
+ continue
+ ;;
+ darwin_framework|darwin_framework_skip)
+ test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg"
+ compile_command="$compile_command $arg"
+ finalize_command="$finalize_command $arg"
+ prev=
+ continue
+ ;;
+ *)
+ eval "$prev=\"\$arg\""
+ prev=
+ continue
+ ;;
+ esac
+ fi # test -n "$prev"
+
+ prevarg="$arg"
+
+ case $arg in
+ -all-static)
+ if test -n "$link_static_flag"; then
+ compile_command="$compile_command $link_static_flag"
+ finalize_command="$finalize_command $link_static_flag"
+ fi
+ continue
+ ;;
+
+ -allow-undefined)
+ # FIXME: remove this flag sometime in the future.
+ $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2
+ continue
+ ;;
+
+ -avoid-version)
+ avoid_version=yes
+ continue
+ ;;
+
+ -dlopen)
+ prev=dlfiles
+ continue
+ ;;
+
+ -dlpreopen)
+ prev=dlprefiles
+ continue
+ ;;
+
+ -export-dynamic)
+ export_dynamic=yes
+ continue
+ ;;
+
+ -export-symbols | -export-symbols-regex)
+ if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+ $echo "$modename: more than one -exported-symbols argument is not allowed"
+ exit $EXIT_FAILURE
+ fi
+ if test "X$arg" = "X-export-symbols"; then
+ prev=expsyms
+ else
+ prev=expsyms_regex
+ fi
+ continue
+ ;;
+
+ -framework|-arch|-isysroot)
+ case " $CC " in
+ *" ${arg} ${1} "* | *" ${arg} ${1} "*)
+ prev=darwin_framework_skip ;;
+ *) compiler_flags="$compiler_flags $arg"
+ prev=darwin_framework ;;
+ esac
+ compile_command="$compile_command $arg"
+ finalize_command="$finalize_command $arg"
+ continue
+ ;;
+
+ -inst-prefix-dir)
+ prev=inst_prefix
+ continue
+ ;;
+
+ # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
+ # so, if we see these flags be careful not to treat them like -L
+ -L[A-Z][A-Z]*:*)
+ case $with_gcc/$host in
+ no/*-*-irix* | /*-*-irix*)
+ compile_command="$compile_command $arg"
+ finalize_command="$finalize_command $arg"
+ ;;
+ esac
+ continue
+ ;;
+
+ -L*)
+ dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
+ # We need an absolute path.
+ case $dir in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ absdir=`cd "$dir" && pwd`
+ if test -z "$absdir"; then
+ $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
+ absdir="$dir"
+ notinst_path="$notinst_path $dir"
+ fi
+ dir="$absdir"
+ ;;
+ esac
+ case "$deplibs " in
+ *" -L$dir "*) ;;
+ *)
+ deplibs="$deplibs -L$dir"
+ lib_search_path="$lib_search_path $dir"
+ ;;
+ esac
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+ testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'`
+ case :$dllsearchpath: in
+ *":$dir:"*) ;;
+ *) dllsearchpath="$dllsearchpath:$dir";;
+ esac
+ case :$dllsearchpath: in
+ *":$testbindir:"*) ;;
+ *) dllsearchpath="$dllsearchpath:$testbindir";;
+ esac
+ ;;
+ esac
+ continue
+ ;;
+
+ -l*)
+ if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*)
+ # These systems don't actually have a C or math library (as such)
+ continue
+ ;;
+ *-*-os2*)
+ # These systems don't actually have a C library (as such)
+ test "X$arg" = "X-lc" && continue
+ ;;
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+ # Do not include libc due to us having libc/libc_r.
+ test "X$arg" = "X-lc" && continue
+ ;;
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # Rhapsody C and math libraries are in the System framework
+ deplibs="$deplibs -framework System"
+ continue
+ ;;
+ *-*-sco3.2v5* | *-*-sco5v6*)
+ # Causes problems with __ctype
+ test "X$arg" = "X-lc" && continue
+ ;;
+ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+ # Compiler inserts libc in the correct place for threads to work
+ test "X$arg" = "X-lc" && continue
+ ;;
+ esac
+ elif test "X$arg" = "X-lc_r"; then
+ case $host in
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+ # Do not include libc_r directly, use -pthread flag.
+ continue
+ ;;
+ esac
+ fi
+ deplibs="$deplibs $arg"
+ continue
+ ;;
+
+ # Tru64 UNIX uses -model [arg] to determine the layout of C++
+ # classes, name mangling, and exception handling.
+ -model)
+ compile_command="$compile_command $arg"
+ compiler_flags="$compiler_flags $arg"
+ finalize_command="$finalize_command $arg"
+ prev=xcompiler
+ continue
+ ;;
+
+ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
+ compiler_flags="$compiler_flags $arg"
+ compile_command="$compile_command $arg"
+ finalize_command="$finalize_command $arg"
+ continue
+ ;;
+
+ -module)
+ module=yes
+ continue
+ ;;
+
+ # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
+ # -r[0-9][0-9]* specifies the processor on the SGI compiler
+ # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
+ # +DA*, +DD* enable 64-bit mode on the HP compiler
+ # -q* pass through compiler args for the IBM compiler
+ # -m* pass through architecture-specific compiler args for GCC
+ # -m*, -t[45]*, -txscale* pass through architecture-specific
+ # compiler args for GCC
+ # -pg pass through profiling flag for GCC
+ # @file GCC response files
+ -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*|-pg| \
+ -t[45]*|-txscale*|@*)
+
+ # Unknown arguments in both finalize_command and compile_command need
+ # to be aesthetically quoted because they are evaled later.
+ arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+ case $arg in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ arg="\"$arg\""
+ ;;
+ esac
+ compile_command="$compile_command $arg"
+ finalize_command="$finalize_command $arg"
+ compiler_flags="$compiler_flags $arg"
+ continue
+ ;;
+
+ -shrext)
+ prev=shrext
+ continue
+ ;;
+
+ -no-fast-install)
+ fast_install=no
+ continue
+ ;;
+
+ -no-install)
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+ # The PATH hackery in wrapper scripts is required on Windows
+ # in order for the loader to find any dlls it needs.
+ $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2
+ $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2
+ fast_install=no
+ ;;
+ *) no_install=yes ;;
+ esac
+ continue
+ ;;
+
+ -no-undefined)
+ allow_undefined=no
+ continue
+ ;;
+
+ -objectlist)
+ prev=objectlist
+ continue
+ ;;
+
+ -o) prev=output ;;
+
+ -precious-files-regex)
+ prev=precious_regex
+ continue
+ ;;
+
+ -release)
+ prev=release
+ continue
+ ;;
+
+ -rpath)
+ prev=rpath
+ continue
+ ;;
+
+ -R)
+ prev=xrpath
+ continue
+ ;;
+
+ -R*)
+ dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
+ # We need an absolute path.
+ case $dir in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ $echo "$modename: only absolute run-paths are allowed" 1>&2
+ exit $EXIT_FAILURE
+ ;;
+ esac
+ case "$xrpath " in
+ *" $dir "*) ;;
+ *) xrpath="$xrpath $dir" ;;
+ esac
+ continue
+ ;;
+
+ -static | -static-libtool-libs)
+ # The effects of -static are defined in a previous loop.
+ # We used to do the same as -all-static on platforms that
+ # didn't have a PIC flag, but the assumption that the effects
+ # would be equivalent was wrong. It would break on at least
+ # Digital Unix and AIX.
+ continue
+ ;;
+
+ -thread-safe)
+ thread_safe=yes
+ continue
+ ;;
+
+ -version-info)
+ prev=vinfo
+ continue
+ ;;
+ -version-number)
+ prev=vinfo
+ vinfo_number=yes
+ continue
+ ;;
+
+ -Wc,*)
+ args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`
+ arg=
+ save_ifs="$IFS"; IFS=','
+ for flag in $args; do
+ IFS="$save_ifs"
+ case $flag in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ flag="\"$flag\""
+ ;;
+ esac
+ arg="$arg $wl$flag"
+ compiler_flags="$compiler_flags $flag"
+ done
+ IFS="$save_ifs"
+ arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
+ ;;
+
+ -Wl,*)
+ args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`
+ arg=
+ save_ifs="$IFS"; IFS=','
+ for flag in $args; do
+ IFS="$save_ifs"
+ case $flag in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ flag="\"$flag\""
+ ;;
+ esac
+ arg="$arg $wl$flag"
+ compiler_flags="$compiler_flags $wl$flag"
+ linker_flags="$linker_flags $flag"
+ done
+ IFS="$save_ifs"
+ arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
+ ;;
+
+ -Xcompiler)
+ prev=xcompiler
+ continue
+ ;;
+
+ -Xlinker)
+ prev=xlinker
+ continue
+ ;;
+
+ -XCClinker)
+ prev=xcclinker
+ continue
+ ;;
+
+ # Some other compiler flag.
+ -* | +*)
+ # Unknown arguments in both finalize_command and compile_command need
+ # to be aesthetically quoted because they are evaled later.
+ arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+ case $arg in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ arg="\"$arg\""
+ ;;
+ esac
+ ;;
+
+ *.$objext)
+ # A standard object.
+ objs="$objs $arg"
+ ;;
+
+ *.lo)
+ # A libtool-controlled object.
+
+ # Check to see that this really is a libtool object.
+ if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+ pic_object=
+ non_pic_object=
+
+ # Read the .lo file
+ # If there is no directory component, then add one.
+ case $arg in
+ */* | *\\*) . $arg ;;
+ *) . ./$arg ;;
+ esac
+
+ if test -z "$pic_object" || \
+ test -z "$non_pic_object" ||
+ test "$pic_object" = none && \
+ test "$non_pic_object" = none; then
+ $echo "$modename: cannot find name of object for \`$arg'" 1>&2
+ exit $EXIT_FAILURE
+ fi
+
+ # Extract subdirectory from the argument.
+ xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+ if test "X$xdir" = "X$arg"; then
+ xdir=
+ else
+ xdir="$xdir/"
+ fi
+
+ if test "$pic_object" != none; then
+ # Prepend the subdirectory the object is found in.
+ pic_object="$xdir$pic_object"
+
+ if test "$prev" = dlfiles; then
+ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+ dlfiles="$dlfiles $pic_object"
+ prev=
+ continue
+ else
+ # If libtool objects are unsupported, then we need to preload.
+ prev=dlprefiles
+ fi
+ fi
+
+ # CHECK ME: I think I busted this. -Ossama
+ if test "$prev" = dlprefiles; then
+ # Preload the old-style object.
+ dlprefiles="$dlprefiles $pic_object"
+ prev=
+ fi
+
+ # A PIC object.
+ libobjs="$libobjs $pic_object"
+ arg="$pic_object"
+ fi
+
+ # Non-PIC object.
+ if test "$non_pic_object" != none; then
+ # Prepend the subdirectory the object is found in.
+ non_pic_object="$xdir$non_pic_object"
+
+ # A standard non-PIC object
+ non_pic_objects="$non_pic_objects $non_pic_object"
+ if test -z "$pic_object" || test "$pic_object" = none ; then
+ arg="$non_pic_object"
+ fi
+ else
+ # If the PIC object exists, use it instead.
+ # $xdir was prepended to $pic_object above.
+ non_pic_object="$pic_object"
+ non_pic_objects="$non_pic_objects $non_pic_object"
+ fi
+ else
+ # Only an error if not doing a dry-run.
+ if test -z "$run"; then
+ $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
+ exit $EXIT_FAILURE
+ else
+ # Dry-run case.
+
+ # Extract subdirectory from the argument.
+ xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+ if test "X$xdir" = "X$arg"; then
+ xdir=
+ else
+ xdir="$xdir/"
+ fi
+
+ pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
+ non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
+ libobjs="$libobjs $pic_object"
+ non_pic_objects="$non_pic_objects $non_pic_object"
+ fi
+ fi
+ ;;
+
+ *.$libext)
+ # An archive.
+ deplibs="$deplibs $arg"
+ old_deplibs="$old_deplibs $arg"
+ continue
+ ;;
+
+ *.la)
+ # A libtool-controlled library.
+
+ if test "$prev" = dlfiles; then
+ # This library was specified with -dlopen.
+ dlfiles="$dlfiles $arg"
+ prev=
+ elif test "$prev" = dlprefiles; then
+ # The library was specified with -dlpreopen.
+ dlprefiles="$dlprefiles $arg"
+ prev=
+ else
+ deplibs="$deplibs $arg"
+ fi
+ continue
+ ;;
+
+ # Some other compiler argument.
+ *)
+ # Unknown arguments in both finalize_command and compile_command need
+ # to be aesthetically quoted because they are evaled later.
+ arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+ case $arg in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ arg="\"$arg\""
+ ;;
+ esac
+ ;;
+ esac # arg
+
+ # Now actually substitute the argument into the commands.
+ if test -n "$arg"; then
+ compile_command="$compile_command $arg"
+ finalize_command="$finalize_command $arg"
+ fi
+ done # argument parsing loop
+
+ if test -n "$prev"; then
+ $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
+ $echo "$help" 1>&2
+ exit $EXIT_FAILURE
+ fi
+
+ if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
+ eval arg=\"$export_dynamic_flag_spec\"
+ compile_command="$compile_command $arg"
+ finalize_command="$finalize_command $arg"
+ fi
+
+ oldlibs=
+ # calculate the name of the file, without its directory
+ outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
+ libobjs_save="$libobjs"
+
+ if test -n "$shlibpath_var"; then
+ # get the directories listed in $shlibpath_var
+ eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
+ else
+ shlib_search_path=
+ fi
+ eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
+ eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+
+ output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
+ if test "X$output_objdir" = "X$output"; then
+ output_objdir="$objdir"
+ else
+ output_objdir="$output_objdir/$objdir"
+ fi
+ # Create the object directory.
+ if test ! -d "$output_objdir"; then
+ $show "$mkdir $output_objdir"
+ $run $mkdir $output_objdir
+ exit_status=$?
+ if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then
+ exit $exit_status
+ fi
+ fi
+
+ # Determine the type of output
+ case $output in
+ "")
+ $echo "$modename: you must specify an output file" 1>&2
+ $echo "$help" 1>&2
+ exit $EXIT_FAILURE
+ ;;
+ *.$libext) linkmode=oldlib ;;
+ *.lo | *.$objext) linkmode=obj ;;
+ *.la) linkmode=lib ;;
+ *) linkmode=prog ;; # Anything else should be a program.
+ esac
+
+ case $host in
+ *cygwin* | *mingw* | *pw32*)
+ # don't eliminate duplications in $postdeps and $predeps
+ duplicate_compiler_generated_deps=yes
+ ;;
+ *)
+ duplicate_compiler_generated_deps=$duplicate_deps
+ ;;
+ esac
+ specialdeplibs=
+
+ libs=
+ # Find all interdependent deplibs by searching for libraries
+ # that are linked more than once (e.g. -la -lb -la)
+ for deplib in $deplibs; do
+ if test "X$duplicate_deps" = "Xyes" ; then
+ case "$libs " in
+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+ esac
+ fi
+ libs="$libs $deplib"
+ done
+
+ if test "$linkmode" = lib; then
+ libs="$predeps $libs $compiler_lib_search_path $postdeps"
+
+ # Compute libraries that are listed more than once in $predeps
+ # $postdeps and mark them as special (i.e., whose duplicates are
+ # not to be eliminated).
+ pre_post_deps=
+ if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then
+ for pre_post_dep in $predeps $postdeps; do
+ case "$pre_post_deps " in
+ *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
+ esac
+ pre_post_deps="$pre_post_deps $pre_post_dep"
+ done
+ fi
+ pre_post_deps=
+ fi
+
+ deplibs=
+ newdependency_libs=
+ newlib_search_path=
+ need_relink=no # whether we're linking any uninstalled libtool libraries
+ notinst_deplibs= # not-installed libtool libraries
+ case $linkmode in
+ lib)
+ passes="conv link"
+ for file in $dlfiles $dlprefiles; do
+ case $file in
+ *.la) ;;
+ *)
+ $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2
+ exit $EXIT_FAILURE
+ ;;
+ esac
+ done
+ ;;
+ prog)
+ compile_deplibs=
+ finalize_deplibs=
+ alldeplibs=no
+ newdlfiles=
+ newdlprefiles=
+ passes="conv scan dlopen dlpreopen link"
+ ;;
+ *) passes="conv"
+ ;;
+ esac
+ for pass in $passes; do
+ if test "$linkmode,$pass" = "lib,link" ||
+ test "$linkmode,$pass" = "prog,scan"; then
+ libs="$deplibs"
+ deplibs=
+ fi
+ if test "$linkmode" = prog; then
+ case $pass in
+ dlopen) libs="$dlfiles" ;;
+ dlpreopen) libs="$dlprefiles" ;;
+ link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
+ esac
+ fi
+ if test "$pass" = dlopen; then
+ # Collect dlpreopened libraries
+ save_deplibs="$deplibs"
+ deplibs=
+ fi
+ for deplib in $libs; do
+ lib=
+ found=no
+ case $deplib in
+ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
+ if test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ compiler_flags="$compiler_flags $deplib"
+ fi
+ continue
+ ;;
+ -l*)
+ if test "$linkmode" != lib && test "$linkmode" != prog; then
+ $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2
+ continue
+ fi
+ name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
+ for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
+ for search_ext in .la $std_shrext .so .a; do
+ # Search the libtool library
+ lib="$searchdir/lib${name}${search_ext}"
+ if test -f "$lib"; then
+ if test "$search_ext" = ".la"; then
+ found=yes
+ else
+ found=no
+ fi
+ break 2
+ fi
+ done
+ done
+ if test "$found" != yes; then
+ # deplib doesn't seem to be a libtool library
+ if test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ deplibs="$deplib $deplibs"
+ test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+ fi
+ continue
+ else # deplib is a libtool library
+ # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
+ # We need to do some special things here, and not later.
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $deplib "*)
+ if (${SED} -e '2q' $lib |
+ grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+ library_names=
+ old_library=
+ case $lib in
+ */* | *\\*) . $lib ;;
+ *) . ./$lib ;;
+ esac
+ for l in $old_library $library_names; do
+ ll="$l"
+ done
+ if test "X$ll" = "X$old_library" ; then # only static version available
+ found=no
+ ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
+ test "X$ladir" = "X$lib" && ladir="."
+ lib=$ladir/$old_library
+ if test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ deplibs="$deplib $deplibs"
+ test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+ fi
+ continue
+ fi
+ fi
+ ;;
+ *) ;;
+ esac
+ fi
+ fi
+ ;; # -l
+ -L*)
+ case $linkmode in
+ lib)
+ deplibs="$deplib $deplibs"
+ test "$pass" = conv && continue
+ newdependency_libs="$deplib $newdependency_libs"
+ newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+ ;;
+ prog)
+ if test "$pass" = conv; then
+ deplibs="$deplib $deplibs"
+ continue
+ fi
+ if test "$pass" = scan; then
+ deplibs="$deplib $deplibs"
+ else
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ fi
+ newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+ ;;
+ *)
+ $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2
+ ;;
+ esac # linkmode
+ continue
+ ;; # -L
+ -R*)
+ if test "$pass" = link; then
+ dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
+ # Make sure the xrpath contains only unique directories.
+ case "$xrpath " in
+ *" $dir "*) ;;
+ *) xrpath="$xrpath $dir" ;;
+ esac
+ fi
+ deplibs="$deplib $deplibs"
+ continue
+ ;;
+ *.la) lib="$deplib" ;;
+ *.$libext)
+ if test "$pass" = conv; then
+ deplibs="$deplib $deplibs"
+ continue
+ fi
+ case $linkmode in
+ lib)
+ valid_a_lib=no
+ case $deplibs_check_method in
+ match_pattern*)
+ set dummy $deplibs_check_method
+ match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+ if eval $echo \"$deplib\" 2>/dev/null \
+ | $SED 10q \
+ | $EGREP "$match_pattern_regex" > /dev/null; then
+ valid_a_lib=yes
+ fi
+ ;;
+ pass_all)
+ valid_a_lib=yes
+ ;;
+ esac
+ if test "$valid_a_lib" != yes; then
+ $echo
+ $echo "*** Warning: Trying to link with static lib archive $deplib."
+ $echo "*** I have the capability to make that library automatically link in when"
+ $echo "*** you link to this library. But I can only do this if you have a"
+ $echo "*** shared version of the library, which you do not appear to have"
+ $echo "*** because the file extensions .$libext of this argument makes me believe"
+ $echo "*** that it is just a static archive that I should not used here."
+ else
+ $echo
+ $echo "*** Warning: Linking the shared library $output against the"
+ $echo "*** static library $deplib is not portable!"
+ deplibs="$deplib $deplibs"
+ fi
+ continue
+ ;;
+ prog)
+ if test "$pass" != link; then
+ deplibs="$deplib $deplibs"
+ else
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ fi
+ continue
+ ;;
+ esac # linkmode
+ ;; # *.$libext
+ *.lo | *.$objext)
+ if test "$pass" = conv; then
+ deplibs="$deplib $deplibs"
+ elif test "$linkmode" = prog; then
+ if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+ # If there is no dlopen support or we're linking statically,
+ # we need to preload.
+ newdlprefiles="$newdlprefiles $deplib"
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ newdlfiles="$newdlfiles $deplib"
+ fi
+ fi
+ continue
+ ;;
+ %DEPLIBS%)
+ alldeplibs=yes
+ continue
+ ;;
+ esac # case $deplib
+ if test "$found" = yes || test -f "$lib"; then :
+ else
+ $echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2
+ exit $EXIT_FAILURE
+ fi
+
+ # Check to see that this really is a libtool archive.
+ if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+ else
+ $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+ exit $EXIT_FAILURE
+ fi
+
+ ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
+ test "X$ladir" = "X$lib" && ladir="."
+
+ dlname=
+ dlopen=
+ dlpreopen=
+ libdir=
+ library_names=
+ old_library=
+ # If the library was installed with an old release of libtool,
+ # it will not redefine variables installed, or shouldnotlink
+ installed=yes
+ shouldnotlink=no
+ avoidtemprpath=
+
+
+ # Read the .la file
+ case $lib in
+ */* | *\\*) . $lib ;;
+ *) . ./$lib ;;
+ esac
+
+ if test "$linkmode,$pass" = "lib,link" ||
+ test "$linkmode,$pass" = "prog,scan" ||
+ { test "$linkmode" != prog && test "$linkmode" != lib; }; then
+ test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
+ test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
+ fi
+
+ if test "$pass" = conv; then
+ # Only check for convenience libraries
+ deplibs="$lib $deplibs"
+ if test -z "$libdir"; then
+ if test -z "$old_library"; then
+ $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
+ exit $EXIT_FAILURE
+ fi
+ # It is a libtool convenience library, so add in its objects.
+ convenience="$convenience $ladir/$objdir/$old_library"
+ old_convenience="$old_convenience $ladir/$objdir/$old_library"
+ tmp_libs=
+ for deplib in $dependency_libs; do
+ deplibs="$deplib $deplibs"
+ if test "X$duplicate_deps" = "Xyes" ; then
+ case "$tmp_libs " in
+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+ esac
+ fi
+ tmp_libs="$tmp_libs $deplib"
+ done
+ elif test "$linkmode" != prog && test "$linkmode" != lib; then
+ $echo "$modename: \`$lib' is not a convenience library" 1>&2
+ exit $EXIT_FAILURE
+ fi
+ continue
+ fi # $pass = conv
+
+
+ # Get the name of the library we link against.
+ linklib=
+ for l in $old_library $library_names; do
+ linklib="$l"
+ done
+ if test -z "$linklib"; then
+ $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
+ exit $EXIT_FAILURE
+ fi
+
+ # This library was specified with -dlopen.
+ if test "$pass" = dlopen; then
+ if test -z "$libdir"; then
+ $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
+ exit $EXIT_FAILURE
+ fi
+ if test -z "$dlname" ||
+ test "$dlopen_support" != yes ||
+ test "$build_libtool_libs" = no; then
+ # If there is no dlname, no dlopen support or we're linking
+ # statically, we need to preload. We also need to preload any
+ # dependent libraries so libltdl's deplib preloader doesn't
+ # bomb out in the load deplibs phase.
+ dlprefiles="$dlprefiles $lib $dependency_libs"
+ else
+ newdlfiles="$newdlfiles $lib"
+ fi
+ continue
+ fi # $pass = dlopen
+
+ # We need an absolute path.
+ case $ladir in
+ [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
+ *)
+ abs_ladir=`cd "$ladir" && pwd`
+ if test -z "$abs_ladir"; then
+ $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2
+ $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
+ abs_ladir="$ladir"
+ fi
+ ;;
+ esac
+ laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+
+ # Find the relevant object directory and library name.
+ if test "X$installed" = Xyes; then
+ if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+ $echo "$modename: warning: library \`$lib' was moved." 1>&2
+ dir="$ladir"
+ absdir="$abs_ladir"
+ libdir="$abs_ladir"
+ else
+ dir="$libdir"
+ absdir="$libdir"
+ fi
+ test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
+ else
+ if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+ dir="$ladir"
+ absdir="$abs_ladir"
+ # Remove this search path later
+ notinst_path="$notinst_path $abs_ladir"
+ else
+ dir="$ladir/$objdir"
+ absdir="$abs_ladir/$objdir"
+ # Remove this search path later
+ notinst_path="$notinst_path $abs_ladir"
+ fi
+ fi # $installed = yes
+ name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+
+ # This library was specified with -dlpreopen.
+ if test "$pass" = dlpreopen; then
+ if test -z "$libdir"; then
+ $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
+ exit $EXIT_FAILURE
+ fi
+ # Prefer using a static library (so that no silly _DYNAMIC symbols
+ # are required to link).
+ if test -n "$old_library"; then
+ newdlprefiles="$newdlprefiles $dir/$old_library"
+ # Otherwise, use the dlname, so that lt_dlopen finds it.
+ elif test -n "$dlname"; then
+ newdlprefiles="$newdlprefiles $dir/$dlname"
+ else
+ newdlprefiles="$newdlprefiles $dir/$linklib"
+ fi
+ fi # $pass = dlpreopen
+
+ if test -z "$libdir"; then
+ # Link the convenience library
+ if test "$linkmode" = lib; then
+ deplibs="$dir/$old_library $deplibs"
+ elif test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$dir/$old_library $compile_deplibs"
+ finalize_deplibs="$dir/$old_library $finalize_deplibs"
+ else
+ deplibs="$lib $deplibs" # used for prog,scan pass
+ fi
+ continue
+ fi
+
+
+ if test "$linkmode" = prog && test "$pass" != link; then
+ newlib_search_path="$newlib_search_path $ladir"
+ deplibs="$lib $deplibs"
+
+ linkalldeplibs=no
+ if test "$link_all_deplibs" != no || test -z "$library_names" ||
+ test "$build_libtool_libs" = no; then
+ linkalldeplibs=yes
+ fi
+
+ tmp_libs=
+ for deplib in $dependency_libs; do
+ case $deplib in
+ -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test
+ esac
+ # Need to link against all dependency_libs?
+ if test "$linkalldeplibs" = yes; then
+ deplibs="$deplib $deplibs"
+ else
+ # Need to hardcode shared library paths
+ # or/and link against static libraries
+ newdependency_libs="$deplib $newdependency_libs"
+ fi
+ if test "X$duplicate_deps" = "Xyes" ; then
+ case "$tmp_libs " in
+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+ esac
+ fi
+ tmp_libs="$tmp_libs $deplib"
+ done # for deplib
+ continue
+ fi # $linkmode = prog...
+
+ if test "$linkmode,$pass" = "prog,link"; then
+ if test -n "$library_names" &&
+ { { test "$prefer_static_libs" = no ||
+ test "$prefer_static_libs,$installed" = "built,yes"; } ||
+ test -z "$old_library"; }; then
+ # We need to hardcode the library path
+ if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
+ # Make sure the rpath contains only unique directories.
+ case "$temp_rpath " in
+ *" $dir "*) ;;
+ *" $absdir "*) ;;
+ *) temp_rpath="$temp_rpath $absdir" ;;
+ esac
+ fi
+
+ # Hardcode the library path.
+ # Skip directories that are in the system default run-time
+ # search path.
+ case " $sys_lib_dlsearch_path " in
+ *" $absdir "*) ;;
+ *)
+ case "$compile_rpath " in
+ *" $absdir "*) ;;
+ *) compile_rpath="$compile_rpath $absdir"
+ esac
+ ;;
+ esac
+ case " $sys_lib_dlsearch_path " in
+ *" $libdir "*) ;;
+ *)
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) finalize_rpath="$finalize_rpath $libdir"
+ esac
+ ;;
+ esac
+ fi # $linkmode,$pass = prog,link...
+
+ if test "$alldeplibs" = yes &&
+ { test "$deplibs_check_method" = pass_all ||
+ { test "$build_libtool_libs" = yes &&
+ test -n "$library_names"; }; }; then
+ # We only need to search for static libraries
+ continue
+ fi
+ fi
+
+ link_static=no # Whether the deplib will be linked statically
+ use_static_libs=$prefer_static_libs
+ if test "$use_static_libs" = built && test "$installed" = yes ; then
+ use_static_libs=no
+ fi
+ if test -n "$library_names" &&
+ { test "$use_static_libs" = no || test -z "$old_library"; }; then
+ if test "$installed" = no; then
+ notinst_deplibs="$notinst_deplibs $lib"
+ need_relink=yes
+ fi
+ # This is a shared library
+
+ # Warn about portability, can't link against -module's on
+ # some systems (darwin)
+ if test "$shouldnotlink" = yes && test "$pass" = link ; then
+ $echo
+ if test "$linkmode" = prog; then
+ $echo "*** Warning: Linking the executable $output against the loadable module"
+ else
+ $echo "*** Warning: Linking the shared library $output against the loadable module"
+ fi
+ $echo "*** $linklib is not portable!"
+ fi
+ if test "$linkmode" = lib &&
+ test "$hardcode_into_libs" = yes; then
+ # Hardcode the library path.
+ # Skip directories that are in the system default run-time
+ # search path.
+ case " $sys_lib_dlsearch_path " in
+ *" $absdir "*) ;;
+ *)
+ case "$compile_rpath " in
+ *" $absdir "*) ;;
+ *) compile_rpath="$compile_rpath $absdir"
+ esac
+ ;;
+ esac
+ case " $sys_lib_dlsearch_path " in
+ *" $libdir "*) ;;
+ *)
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) finalize_rpath="$finalize_rpath $libdir"
+ esac
+ ;;
+ esac
+ fi
+
+ if test -n "$old_archive_from_expsyms_cmds"; then
+ # figure out the soname
+ set dummy $library_names
+ realname="$2"
+ shift; shift
+ libname=`eval \\$echo \"$libname_spec\"`
+ # use dlname if we got it. it's perfectly good, no?
+ if test -n "$dlname"; then
+ soname="$dlname"
+ elif test -n "$soname_spec"; then
+ # bleh windows
+ case $host in
+ *cygwin* | mingw*)
+ major=`expr $current - $age`
+ versuffix="-$major"
+ ;;
+ esac
+ eval soname=\"$soname_spec\"
+ else
+ soname="$realname"
+ fi
+
+ # Make a new name for the extract_expsyms_cmds to use
+ soroot="$soname"
+ soname=`$echo $soroot | ${SED} -e 's/^.*\///'`
+ newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a"
+
+ # If the library has no export list, then create one now
+ if test -f "$output_objdir/$soname-def"; then :
+ else
+ $show "extracting exported symbol list from \`$soname'"
+ save_ifs="$IFS"; IFS='~'
+ cmds=$extract_expsyms_cmds
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ eval cmd=\"$cmd\"
+ $show "$cmd"
+ $run eval "$cmd" || exit $?
+ done
+ IFS="$save_ifs"
+ fi
+
+ # Create $newlib
+ if test -f "$output_objdir/$newlib"; then :; else
+ $show "generating import library for \`$soname'"
+ save_ifs="$IFS"; IFS='~'
+ cmds=$old_archive_from_expsyms_cmds
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ eval cmd=\"$cmd\"
+ $show "$cmd"
+ $run eval "$cmd" || exit $?
+ done
+ IFS="$save_ifs"
+ fi
+ # make sure the library variables are pointing to the new library
+ dir=$output_objdir
+ linklib=$newlib
+ fi # test -n "$old_archive_from_expsyms_cmds"
+
+ if test "$linkmode" = prog || test "$mode" != relink; then
+ add_shlibpath=
+ add_dir=
+ add=
+ lib_linked=yes
+ case $hardcode_action in
+ immediate | unsupported)
+ if test "$hardcode_direct" = no; then
+ add="$dir/$linklib"
+ case $host in
+ *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
+ *-*-sysv4*uw2*) add_dir="-L$dir" ;;
+ *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
+ *-*-unixware7*) add_dir="-L$dir" ;;
+ *-*-darwin* )
+ # if the lib is a module then we can not link against
+ # it, someone is ignoring the new warnings I added
+ if /usr/bin/file -L $add 2> /dev/null |
+ $EGREP ": [^:]* bundle" >/dev/null ; then
+ $echo "** Warning, lib $linklib is a module, not a shared library"
+ if test -z "$old_library" ; then
+ $echo
+ $echo "** And there doesn't seem to be a static archive available"
+ $echo "** The link will probably fail, sorry"
+ else
+ add="$dir/$old_library"
+ fi
+ fi
+ esac
+ elif test "$hardcode_minus_L" = no; then
+ case $host in
+ *-*-sunos*) add_shlibpath="$dir" ;;
+ esac
+ add_dir="-L$dir"
+ add="-l$name"
+ elif test "$hardcode_shlibpath_var" = no; then
+ add_shlibpath="$dir"
+ add="-l$name"
+ else
+ lib_linked=no
+ fi
+ ;;
+ relink)
+ if test "$hardcode_direct" = yes; then
+ add="$dir/$linklib"
+ elif test "$hardcode_minus_L" = yes; then
+ add_dir="-L$dir"
+ # Try looking first in the location we're being installed to.
+ if test -n "$inst_prefix_dir"; then
+ case $libdir in
+ [\\/]*)
+ add_dir="$add_dir -L$inst_prefix_dir$libdir"
+ ;;
+ esac
+ fi
+ add="-l$name"
+ elif test "$hardcode_shlibpath_var" = yes; then
+ add_shlibpath="$dir"
+ add="-l$name"
+ else
+ lib_linked=no
+ fi
+ ;;
+ *) lib_linked=no ;;
+ esac
+
+ if test "$lib_linked" != yes; then
+ $echo "$modename: configuration error: unsupported hardcode properties"
+ exit $EXIT_FAILURE
+ fi
+
+ if test -n "$add_shlibpath"; then
+ case :$compile_shlibpath: in
+ *":$add_shlibpath:"*) ;;
+ *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
+ esac
+ fi
+ if test "$linkmode" = prog; then
+ test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
+ test -n "$add" && compile_deplibs="$add $compile_deplibs"
+ else
+ test -n "$add_dir" && deplibs="$add_dir $deplibs"
+ test -n "$add" && deplibs="$add $deplibs"
+ if test "$hardcode_direct" != yes && \
+ test "$hardcode_minus_L" != yes && \
+ test "$hardcode_shlibpath_var" = yes; then
+ case :$finalize_shlibpath: in
+ *":$libdir:"*) ;;
+ *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
+ esac
+ fi
+ fi
+ fi
+
+ if test "$linkmode" = prog || test "$mode" = relink; then
+ add_shlibpath=
+ add_dir=
+ add=
+ # Finalize command for both is simple: just hardcode it.
+ if test "$hardcode_direct" = yes; then
+ add="$libdir/$linklib"
+ elif test "$hardcode_minus_L" = yes; then
+ add_dir="-L$libdir"
+ add="-l$name"
+ elif test "$hardcode_shlibpath_var" = yes; then
+ case :$finalize_shlibpath: in
+ *":$libdir:"*) ;;
+ *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
+ esac
+ add="-l$name"
+ elif test "$hardcode_automatic" = yes; then
+ if test -n "$inst_prefix_dir" &&
+ test -f "$inst_prefix_dir$libdir/$linklib" ; then
+ add="$inst_prefix_dir$libdir/$linklib"
+ else
+ add="$libdir/$linklib"
+ fi
+ else
+ # We cannot seem to hardcode it, guess we'll fake it.
+ add_dir="-L$libdir"
+ # Try looking first in the location we're being installed to.
+ if test -n "$inst_prefix_dir"; then
+ case $libdir in
+ [\\/]*)
+ add_dir="$add_dir -L$inst_prefix_dir$libdir"
+ ;;
+ esac
+ fi
+ add="-l$name"
+ fi
+
+ if test "$linkmode" = prog; then
+ test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
+ test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
+ else
+ test -n "$add_dir" && deplibs="$add_dir $deplibs"
+ test -n "$add" && deplibs="$add $deplibs"
+ fi
+ fi
+ elif test "$linkmode" = prog; then
+ # Here we assume that one of hardcode_direct or hardcode_minus_L
+ # is not unsupported. This is valid on all known static and
+ # shared platforms.
+ if test "$hardcode_direct" != unsupported; then
+ test -n "$old_library" && linklib="$old_library"
+ compile_deplibs="$dir/$linklib $compile_deplibs"
+ finalize_deplibs="$dir/$linklib $finalize_deplibs"
+ else
+ compile_deplibs="-l$name -L$dir $compile_deplibs"
+ finalize_deplibs="-l$name -L$dir $finalize_deplibs"
+ fi
+ elif test "$build_libtool_libs" = yes; then
+ # Not a shared library
+ if test "$deplibs_check_method" != pass_all; then
+ # We're trying link a shared library against a static one
+ # but the system doesn't support it.
+
+ # Just print a warning and add the library to dependency_libs so
+ # that the program can be linked against the static library.
+ $echo
+ $echo "*** Warning: This system can not link to static lib archive $lib."
+ $echo "*** I have the capability to make that library automatically link in when"
+ $echo "*** you link to this library. But I can only do this if you have a"
+ $echo "*** shared version of the library, which you do not appear to have."
+ if test "$module" = yes; then
+ $echo "*** But as you try to build a module library, libtool will still create "
+ $echo "*** a static module, that should work as long as the dlopening application"
+ $echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
+ if test -z "$global_symbol_pipe"; then
+ $echo
+ $echo "*** However, this would only work if libtool was able to extract symbol"
+ $echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+ $echo "*** not find such a program. So, this module is probably useless."
+ $echo "*** \`nm' from GNU binutils and a full rebuild may help."
+ fi
+ if test "$build_old_libs" = no; then
+ build_libtool_libs=module
+ build_old_libs=yes
+ else
+ build_libtool_libs=no
+ fi
+ fi
+ else
+ deplibs="$dir/$old_library $deplibs"
+ link_static=yes
+ fi
+ fi # link shared/static library?
+
+ if test "$linkmode" = lib; then
+ if test -n "$dependency_libs" &&
+ { test "$hardcode_into_libs" != yes ||
+ test "$build_old_libs" = yes ||
+ test "$link_static" = yes; }; then
+ # Extract -R from dependency_libs
+ temp_deplibs=
+ for libdir in $dependency_libs; do
+ case $libdir in
+ -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'`
+ case " $xrpath " in
+ *" $temp_xrpath "*) ;;
+ *) xrpath="$xrpath $temp_xrpath";;
+ esac;;
+ *) temp_deplibs="$temp_deplibs $libdir";;
+ esac
+ done
+ dependency_libs="$temp_deplibs"
+ fi
+
+ newlib_search_path="$newlib_search_path $absdir"
+ # Link against this library
+ test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
+ # ... and its dependency_libs
+ tmp_libs=
+ for deplib in $dependency_libs; do
+ newdependency_libs="$deplib $newdependency_libs"
+ if test "X$duplicate_deps" = "Xyes" ; then
+ case "$tmp_libs " in
+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+ esac
+ fi
+ tmp_libs="$tmp_libs $deplib"
+ done
+
+ if test "$link_all_deplibs" != no; then
+ # Add the search paths of all dependency libraries
+ for deplib in $dependency_libs; do
+ case $deplib in
+ -L*) path="$deplib" ;;
+ *.la)
+ dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'`
+ test "X$dir" = "X$deplib" && dir="."
+ # We need an absolute path.
+ case $dir in
+ [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
+ *)
+ absdir=`cd "$dir" && pwd`
+ if test -z "$absdir"; then
+ $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
+ absdir="$dir"
+ fi
+ ;;
+ esac
+ if grep "^installed=no" $deplib > /dev/null; then
+ path="$absdir/$objdir"
+ else
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+ if test -z "$libdir"; then
+ $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
+ exit $EXIT_FAILURE
+ fi
+ if test "$absdir" != "$libdir"; then
+ $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
+ fi
+ path="$absdir"
+ fi
+ depdepl=
+ case $host in
+ *-*-darwin*)
+ # we do not want to link against static libs,
+ # but need to link against shared
+ eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
+ if test -n "$deplibrary_names" ; then
+ for tmp in $deplibrary_names ; do
+ depdepl=$tmp
+ done
+ if test -f "$path/$depdepl" ; then
+ depdepl="$path/$depdepl"
+ fi
+ # do not add paths which are already there
+ case " $newlib_search_path " in
+ *" $path "*) ;;
+ *) newlib_search_path="$newlib_search_path $path";;
+ esac
+ fi
+ path=""
+ ;;
+ *)
+ path="-L$path"
+ ;;
+ esac
+ ;;
+ -l*)
+ case $host in
+ *-*-darwin*)
+ # Again, we only want to link against shared libraries
+ eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"`
+ for tmp in $newlib_search_path ; do
+ if test -f "$tmp/lib$tmp_libs.dylib" ; then
+ eval depdepl="$tmp/lib$tmp_libs.dylib"
+ break
+ fi
+ done
+ path=""
+ ;;
+ *) continue ;;
+ esac
+ ;;
+ *) continue ;;
+ esac
+ case " $deplibs " in
+ *" $path "*) ;;
+ *) deplibs="$path $deplibs" ;;
+ esac
+ case " $deplibs " in
+ *" $depdepl "*) ;;
+ *) deplibs="$depdepl $deplibs" ;;
+ esac
+ done
+ fi # link_all_deplibs != no
+ fi # linkmode = lib
+ done # for deplib in $libs
+ dependency_libs="$newdependency_libs"
+ if test "$pass" = dlpreopen; then
+ # Link the dlpreopened libraries before other libraries
+ for deplib in $save_deplibs; do
+ deplibs="$deplib $deplibs"
+ done
+ fi
+ if test "$pass" != dlopen; then
+ if test "$pass" != conv; then
+ # Make sure lib_search_path contains only unique directories.
+ lib_search_path=
+ for dir in $newlib_search_path; do
+ case "$lib_search_path " in
+ *" $dir "*) ;;
+ *) lib_search_path="$lib_search_path $dir" ;;
+ esac
+ done
+ newlib_search_path=
+ fi
+
+ if test "$linkmode,$pass" != "prog,link"; then
+ vars="deplibs"
+ else
+ vars="compile_deplibs finalize_deplibs"
+ fi
+ for var in $vars dependency_libs; do
+ # Add libraries to $var in reverse order
+ eval tmp_libs=\"\$$var\"
+ new_libs=
+ for deplib in $tmp_libs; do
+ # FIXME: Pedantically, this is the right thing to do, so
+ # that some nasty dependency loop isn't accidentally
+ # broken:
+ #new_libs="$deplib $new_libs"
+ # Pragmatically, this seems to cause very few problems in
+ # practice:
+ case $deplib in
+ -L*) new_libs="$deplib $new_libs" ;;
+ -R*) ;;
+ *)
+ # And here is the reason: when a library appears more
+ # than once as an explicit dependence of a library, or
+ # is implicitly linked in more than once by the
+ # compiler, it is considered special, and multiple
+ # occurrences thereof are not removed. Compare this
+ # with having the same library being listed as a
+ # dependency of multiple other libraries: in this case,
+ # we know (pedantically, we assume) the library does not
+ # need to be listed more than once, so we keep only the
+ # last copy. This is not always right, but it is rare
+ # enough that we require users that really mean to play
+ # such unportable linking tricks to link the library
+ # using -Wl,-lname, so that libtool does not consider it
+ # for duplicate removal.
+ case " $specialdeplibs " in
+ *" $deplib "*) new_libs="$deplib $new_libs" ;;
+ *)
+ case " $new_libs " in
+ *" $deplib "*) ;;
+ *) new_libs="$deplib $new_libs" ;;
+ esac
+ ;;
+ esac
+ ;;
+ esac
+ done
+ tmp_libs=
+ for deplib in $new_libs; do
+ case $deplib in
+ -L*)
+ case " $tmp_libs " in
+ *" $deplib "*) ;;
+ *) tmp_libs="$tmp_libs $deplib" ;;
+ esac
+ ;;
+ *) tmp_libs="$tmp_libs $deplib" ;;
+ esac
+ done
+ eval $var=\"$tmp_libs\"
+ done # for var
+ fi
+ # Last step: remove runtime libs from dependency_libs
+ # (they stay in deplibs)
+ tmp_libs=
+ for i in $dependency_libs ; do
+ case " $predeps $postdeps $compiler_lib_search_path " in
+ *" $i "*)
+ i=""
+ ;;
+ esac
+ if test -n "$i" ; then
+ tmp_libs="$tmp_libs $i"
+ fi
+ done
+ dependency_libs=$tmp_libs
+ done # for pass
+ if test "$linkmode" = prog; then
+ dlfiles="$newdlfiles"
+ dlprefiles="$newdlprefiles"
+ fi
+
+ case $linkmode in
+ oldlib)
+ if test -n "$deplibs"; then
+ $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2
+ fi
+
+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+ $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
+ fi
+
+ if test -n "$rpath"; then
+ $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2
+ fi
+
+ if test -n "$xrpath"; then
+ $echo "$modename: warning: \`-R' is ignored for archives" 1>&2
+ fi
+
+ if test -n "$vinfo"; then
+ $echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2
+ fi
+
+ if test -n "$release"; then
+ $echo "$modename: warning: \`-release' is ignored for archives" 1>&2
+ fi
+
+ if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+ $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2
+ fi
+
+ # Now set the variables for building old libraries.
+ build_libtool_libs=no
+ oldlibs="$output"
+ objs="$objs$old_deplibs"
+ ;;
+
+ lib)
+ # Make sure we only generate libraries of the form `libNAME.la'.
+ case $outputname in
+ lib*)
+ name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+ eval shared_ext=\"$shrext_cmds\"
+ eval libname=\"$libname_spec\"
+ ;;
+ *)
+ if test "$module" = no; then
+ $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
+ $echo "$help" 1>&2
+ exit $EXIT_FAILURE
+ fi
+ if test "$need_lib_prefix" != no; then
+ # Add the "lib" prefix for modules if required
+ name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+ eval shared_ext=\"$shrext_cmds\"
+ eval libname=\"$libname_spec\"
+ else
+ libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+ fi
+ ;;
+ esac
+
+ if test -n "$objs"; then
+ if test "$deplibs_check_method" != pass_all; then
+ $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1
+ exit $EXIT_FAILURE
+ else
+ $echo
+ $echo "*** Warning: Linking the shared library $output against the non-libtool"
+ $echo "*** objects $objs is not portable!"
+ libobjs="$libobjs $objs"
+ fi
+ fi
+
+ if test "$dlself" != no; then
+ $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2
+ fi
+
+ set dummy $rpath
+ if test "$#" -gt 2; then
+ $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
+ fi
+ install_libdir="$2"
+
+ oldlibs=
+ if test -z "$rpath"; then
+ if test "$build_libtool_libs" = yes; then
+ # Building a libtool convenience library.
+ # Some compilers have problems with a `.al' extension so
+ # convenience libraries should have the same extension an
+ # archive normally would.
+ oldlibs="$output_objdir/$libname.$libext $oldlibs"
+ build_libtool_libs=convenience
+ build_old_libs=yes
+ fi
+
+ if test -n "$vinfo"; then
+ $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2
+ fi
+
+ if test -n "$release"; then
+ $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2
+ fi
+ else
+
+ # Parse the version information argument.
+ save_ifs="$IFS"; IFS=':'
+ set dummy $vinfo 0 0 0
+ IFS="$save_ifs"
+
+ if test -n "$8"; then
+ $echo "$modename: too many parameters to \`-version-info'" 1>&2
+ $echo "$help" 1>&2
+ exit $EXIT_FAILURE
+ fi
+
+ # convert absolute version numbers to libtool ages
+ # this retains compatibility with .la files and attempts
+ # to make the code below a bit more comprehensible
+
+ case $vinfo_number in
+ yes)
+ number_major="$2"
+ number_minor="$3"
+ number_revision="$4"
+ #
+ # There are really only two kinds -- those that
+ # use the current revision as the major version
+ # and those that subtract age and use age as
+ # a minor version. But, then there is irix
+ # which has an extra 1 added just for fun
+ #
+ case $version_type in
+ darwin|linux|osf|windows|none)
+ current=`expr $number_major + $number_minor`
+ age="$number_minor"
+ revision="$number_revision"
+ ;;
+ freebsd-aout|freebsd-elf|sunos)
+ current="$number_major"
+ revision="$number_minor"
+ age="0"
+ ;;
+ irix|nonstopux)
+ current=`expr $number_major + $number_minor - 1`
+ age="$number_minor"
+ revision="$number_minor"
+ ;;
+ esac
+ ;;
+ no)
+ current="$2"
+ revision="$3"
+ age="$4"
+ ;;
+ esac
+
+ # Check that each of the things are valid numbers.
+ case $current in
+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+ *)
+ $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2
+ $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+ exit $EXIT_FAILURE
+ ;;
+ esac
+
+ case $revision in
+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+ *)
+ $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2
+ $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+ exit $EXIT_FAILURE
+ ;;
+ esac
+
+ case $age in
+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+ *)
+ $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2
+ $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+ exit $EXIT_FAILURE
+ ;;
+ esac
+
+ if test "$age" -gt "$current"; then
+ $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
+ $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+ exit $EXIT_FAILURE
+ fi
+
+ # Calculate the version variables.
+ major=
+ versuffix=
+ verstring=
+ case $version_type in
+ none) ;;
+
+ darwin)
+ # Like Linux, but with the current version available in
+ # verstring for coding it into the library header
+ major=.`expr $current - $age`
+ versuffix="$major.$age.$revision"
+ # Darwin ld doesn't like 0 for these options...
+ minor_current=`expr $current + 1`
+ verstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
+ ;;
+
+ freebsd-aout)
+ major=".$current"
+ versuffix=".$current.$revision";
+ ;;
+
+ freebsd-elf)
+ major=".$current"
+ versuffix=".$current";
+ ;;
+
+ irix | nonstopux)
+ major=`expr $current - $age + 1`
+
+ case $version_type in
+ nonstopux) verstring_prefix=nonstopux ;;
+ *) verstring_prefix=sgi ;;
+ esac
+ verstring="$verstring_prefix$major.$revision"
+
+ # Add in all the interfaces that we are compatible with.
+ loop=$revision
+ while test "$loop" -ne 0; do
+ iface=`expr $revision - $loop`
+ loop=`expr $loop - 1`
+ verstring="$verstring_prefix$major.$iface:$verstring"
+ done
+
+ # Before this point, $major must not contain `.'.
+ major=.$major
+ versuffix="$major.$revision"
+ ;;
+
+ linux)
+ major=.`expr $current - $age`
+ versuffix="$major.$age.$revision"
+ ;;
+
+ osf)
+ major=.`expr $current - $age`
+ versuffix=".$current.$age.$revision"
+ verstring="$current.$age.$revision"
+
+ # Add in all the interfaces that we are compatible with.
+ loop=$age
+ while test "$loop" -ne 0; do
+ iface=`expr $current - $loop`
+ loop=`expr $loop - 1`
+ verstring="$verstring:${iface}.0"
+ done
+
+ # Make executables depend on our current version.
+ verstring="$verstring:${current}.0"
+ ;;
+
+ sunos)
+ major=".$current"
+ versuffix=".$current.$revision"
+ ;;
+
+ windows)
+ # Use '-' rather than '.', since we only want one
+ # extension on DOS 8.3 filesystems.
+ major=`expr $current - $age`
+ versuffix="-$major"
+ ;;
+
+ *)
+ $echo "$modename: unknown library version type \`$version_type'" 1>&2
+ $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
+ exit $EXIT_FAILURE
+ ;;
+ esac
+
+ # Clear the version info if we defaulted, and they specified a release.
+ if test -z "$vinfo" && test -n "$release"; then
+ major=
+ case $version_type in
+ darwin)
+ # we can't check for "0.0" in archive_cmds due to quoting
+ # problems, so we reset it completely
+ verstring=
+ ;;
+ *)
+ verstring="0.0"
+ ;;
+ esac
+ if test "$need_version" = no; then
+ versuffix=
+ else
+ versuffix=".0.0"
+ fi
+ fi
+
+ # Remove version info from name if versioning should be avoided
+ if test "$avoid_version" = yes && test "$need_version" = no; then
+ major=
+ versuffix=
+ verstring=""
+ fi
+
+ # Check to see if the archive will have undefined symbols.
+ if test "$allow_undefined" = yes; then
+ if test "$allow_undefined_flag" = unsupported; then
+ $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
+ build_libtool_libs=no
+ build_old_libs=yes
+ fi
+ else
+ # Don't allow undefined symbols.
+ allow_undefined_flag="$no_undefined_flag"
+ fi
+ fi
+
+ if test "$mode" != relink; then
+ # Remove our outputs, but don't remove object files since they
+ # may have been created when compiling PIC objects.
+ removelist=
+ tempremovelist=`$echo "$output_objdir/*"`
+ for p in $tempremovelist; do
+ case $p in
+ *.$objext)
+ ;;
+ $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
+ if test "X$precious_files_regex" != "X"; then
+ if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
+ then
+ continue
+ fi
+ fi
+ removelist="$removelist $p"
+ ;;
+ *) ;;
+ esac
+ done
+ if test -n "$removelist"; then
+ $show "${rm}r $removelist"
+ $run ${rm}r $removelist
+ fi
+ fi
+
+ # Now set the variables for building old libraries.
+ if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
+ oldlibs="$oldlibs $output_objdir/$libname.$libext"
+
+ # Transform .lo files to .o files.
+ oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
+ fi
+
+ # Eliminate all temporary directories.
+# for path in $notinst_path; do
+# lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"`
+# deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"`
+# dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"`
+# done
+
+ if test -n "$xrpath"; then
+ # If the user specified any rpath flags, then add them.
+ temp_xrpath=
+ for libdir in $xrpath; do
+ temp_xrpath="$temp_xrpath -R$libdir"
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) finalize_rpath="$finalize_rpath $libdir" ;;
+ esac
+ done
+ if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
+ dependency_libs="$temp_xrpath $dependency_libs"
+ fi
+ fi
+
+ # Make sure dlfiles contains only unique files that won't be dlpreopened
+ old_dlfiles="$dlfiles"
+ dlfiles=
+ for lib in $old_dlfiles; do
+ case " $dlprefiles $dlfiles " in
+ *" $lib "*) ;;
+ *) dlfiles="$dlfiles $lib" ;;
+ esac
+ done
+
+ # Make sure dlprefiles contains only unique files
+ old_dlprefiles="$dlprefiles"
+ dlprefiles=
+ for lib in $old_dlprefiles; do
+ case "$dlprefiles " in
+ *" $lib "*) ;;
+ *) dlprefiles="$dlprefiles $lib" ;;
+ esac
+ done
+
+ if test "$build_libtool_libs" = yes; then
+ if test -n "$rpath"; then
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
+ # these systems don't actually have a c library (as such)!
+ ;;
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # Rhapsody C library is in the System framework
+ deplibs="$deplibs -framework System"
+ ;;
+ *-*-netbsd*)
+ # Don't link with libc until the a.out ld.so is fixed.
+ ;;
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+ # Do not include libc due to us having libc/libc_r.
+ ;;
+ *-*-sco3.2v5* | *-*-sco5v6*)
+ # Causes problems with __ctype
+ ;;
+ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+ # Compiler inserts libc in the correct place for threads to work
+ ;;
+ *)
+ # Add libc to deplibs on all other systems if necessary.
+ if test "$build_libtool_need_lc" = "yes"; then
+ deplibs="$deplibs -lc"
+ fi
+ ;;
+ esac
+ fi
+
+ # Transform deplibs into only deplibs that can be linked in shared.
+ name_save=$name
+ libname_save=$libname
+ release_save=$release
+ versuffix_save=$versuffix
+ major_save=$major
+ # I'm not sure if I'm treating the release correctly. I think
+ # release should show up in the -l (ie -lgmp5) so we don't want to
+ # add it in twice. Is that correct?
+ release=""
+ versuffix=""
+ major=""
+ newdeplibs=
+ droppeddeps=no
+ case $deplibs_check_method in
+ pass_all)
+ # Don't check for shared/static. Everything works.
+ # This might be a little naive. We might want to check
+ # whether the library exists or not. But this is on
+ # osf3 & osf4 and I'm not really sure... Just
+ # implementing what was already the behavior.
+ newdeplibs=$deplibs
+ ;;
+ test_compile)
+ # This code stresses the "libraries are programs" paradigm to its
+ # limits. Maybe even breaks it. We compile a program, linking it
+ # against the deplibs as a proxy for the library. Then we can check
+ # whether they linked in statically or dynamically with ldd.
+ $rm conftest.c
+ cat > conftest.c <<EOF
+ int main() { return 0; }
+EOF
+ $rm conftest
+ if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
+ ldd_output=`ldd conftest`
+ for i in $deplibs; do
+ name=`expr $i : '-l\(.*\)'`
+ # If $name is empty we are operating on a -L argument.
+ if test "$name" != "" && test "$name" != "0"; then
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $i "*)
+ newdeplibs="$newdeplibs $i"
+ i=""
+ ;;
+ esac
+ fi
+ if test -n "$i" ; then
+ libname=`eval \\$echo \"$libname_spec\"`
+ deplib_matches=`eval \\$echo \"$library_names_spec\"`
+ set dummy $deplib_matches
+ deplib_match=$2
+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+ newdeplibs="$newdeplibs $i"
+ else
+ droppeddeps=yes
+ $echo
+ $echo "*** Warning: dynamic linker does not accept needed library $i."
+ $echo "*** I have the capability to make that library automatically link in when"
+ $echo "*** you link to this library. But I can only do this if you have a"
+ $echo "*** shared version of the library, which I believe you do not have"
+ $echo "*** because a test_compile did reveal that the linker did not use it for"
+ $echo "*** its dynamic dependency list that programs get resolved with at runtime."
+ fi
+ fi
+ else
+ newdeplibs="$newdeplibs $i"
+ fi
+ done
+ else
+ # Error occurred in the first compile. Let's try to salvage
+ # the situation: Compile a separate program for each library.
+ for i in $deplibs; do
+ name=`expr $i : '-l\(.*\)'`
+ # If $name is empty we are operating on a -L argument.
+ if test "$name" != "" && test "$name" != "0"; then
+ $rm conftest
+ if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
+ ldd_output=`ldd conftest`
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $i "*)
+ newdeplibs="$newdeplibs $i"
+ i=""
+ ;;
+ esac
+ fi
+ if test -n "$i" ; then
+ libname=`eval \\$echo \"$libname_spec\"`
+ deplib_matches=`eval \\$echo \"$library_names_spec\"`
+ set dummy $deplib_matches
+ deplib_match=$2
+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+ newdeplibs="$newdeplibs $i"
+ else
+ droppeddeps=yes
+ $echo
+ $echo "*** Warning: dynamic linker does not accept needed library $i."
+ $echo "*** I have the capability to make that library automatically link in when"
+ $echo "*** you link to this library. But I can only do this if you have a"
+ $echo "*** shared version of the library, which you do not appear to have"
+ $echo "*** because a test_compile did reveal that the linker did not use this one"
+ $echo "*** as a dynamic dependency that programs can get resolved with at runtime."
+ fi
+ fi
+ else
+ droppeddeps=yes
+ $echo
+ $echo "*** Warning! Library $i is needed by this library but I was not able to"
+ $echo "*** make it link in! You will probably need to install it or some"
+ $echo "*** library that it depends on before this library will be fully"
+ $echo "*** functional. Installing it before continuing would be even better."
+ fi
+ else
+ newdeplibs="$newdeplibs $i"
+ fi
+ done
+ fi
+ ;;
+ file_magic*)
+ set dummy $deplibs_check_method
+ file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+ for a_deplib in $deplibs; do
+ name=`expr $a_deplib : '-l\(.*\)'`
+ # If $name is empty we are operating on a -L argument.
+ if test "$name" != "" && test "$name" != "0"; then
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $a_deplib "*)
+ newdeplibs="$newdeplibs $a_deplib"
+ a_deplib=""
+ ;;
+ esac
+ fi
+ if test -n "$a_deplib" ; then
+ libname=`eval \\$echo \"$libname_spec\"`
+ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+ potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+ for potent_lib in $potential_libs; do
+ # Follow soft links.
+ if ls -lLd "$potent_lib" 2>/dev/null \
+ | grep " -> " >/dev/null; then
+ continue
+ fi
+ # The statement above tries to avoid entering an
+ # endless loop below, in case of cyclic links.
+ # We might still enter an endless loop, since a link
+ # loop can be closed while we follow links,
+ # but so what?
+ potlib="$potent_lib"
+ while test -h "$potlib" 2>/dev/null; do
+ potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
+ case $potliblink in
+ [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
+ *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
+ esac
+ done
+ if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
+ | ${SED} 10q \
+ | $EGREP "$file_magic_regex" > /dev/null; then
+ newdeplibs="$newdeplibs $a_deplib"
+ a_deplib=""
+ break 2
+ fi
+ done
+ done
+ fi
+ if test -n "$a_deplib" ; then
+ droppeddeps=yes
+ $echo
+ $echo "*** Warning: linker path does not have real file for library $a_deplib."
+ $echo "*** I have the capability to make that library automatically link in when"
+ $echo "*** you link to this library. But I can only do this if you have a"
+ $echo "*** shared version of the library, which you do not appear to have"
+ $echo "*** because I did check the linker path looking for a file starting"
+ if test -z "$potlib" ; then
+ $echo "*** with $libname but no candidates were found. (...for file magic test)"
+ else
+ $echo "*** with $libname and none of the candidates passed a file format test"
+ $echo "*** using a file magic. Last file checked: $potlib"
+ fi
+ fi
+ else
+ # Add a -L argument.
+ newdeplibs="$newdeplibs $a_deplib"
+ fi
+ done # Gone through all deplibs.
+ ;;
+ match_pattern*)
+ set dummy $deplibs_check_method
+ match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+ for a_deplib in $deplibs; do
+ name=`expr $a_deplib : '-l\(.*\)'`
+ # If $name is empty we are operating on a -L argument.
+ if test -n "$name" && test "$name" != "0"; then
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $a_deplib "*)
+ newdeplibs="$newdeplibs $a_deplib"
+ a_deplib=""
+ ;;
+ esac
+ fi
+ if test -n "$a_deplib" ; then
+ libname=`eval \\$echo \"$libname_spec\"`
+ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+ potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+ for potent_lib in $potential_libs; do
+ potlib="$potent_lib" # see symlink-check above in file_magic test
+ if eval $echo \"$potent_lib\" 2>/dev/null \
+ | ${SED} 10q \
+ | $EGREP "$match_pattern_regex" > /dev/null; then
+ newdeplibs="$newdeplibs $a_deplib"
+ a_deplib=""
+ break 2
+ fi
+ done
+ done
+ fi
+ if test -n "$a_deplib" ; then
+ droppeddeps=yes
+ $echo
+ $echo "*** Warning: linker path does not have real file for library $a_deplib."
+ $echo "*** I have the capability to make that library automatically link in when"
+ $echo "*** you link to this library. But I can only do this if you have a"
+ $echo "*** shared version of the library, which you do not appear to have"
+ $echo "*** because I did check the linker path looking for a file starting"
+ if test -z "$potlib" ; then
+ $echo "*** with $libname but no candidates were found. (...for regex pattern test)"
+ else
+ $echo "*** with $libname and none of the candidates passed a file format test"
+ $echo "*** using a regex pattern. Last file checked: $potlib"
+ fi
+ fi
+ else
+ # Add a -L argument.
+ newdeplibs="$newdeplibs $a_deplib"
+ fi
+ done # Gone through all deplibs.
+ ;;
+ none | unknown | *)
+ newdeplibs=""
+ tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
+ -e 's/ -[LR][^ ]*//g'`
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ for i in $predeps $postdeps ; do
+ # can't use Xsed below, because $i might contain '/'
+ tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"`
+ done
+ fi
+ if $echo "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' \
+ | grep . >/dev/null; then
+ $echo
+ if test "X$deplibs_check_method" = "Xnone"; then
+ $echo "*** Warning: inter-library dependencies are not supported in this platform."
+ else
+ $echo "*** Warning: inter-library dependencies are not known to be supported."
+ fi
+ $echo "*** All declared inter-library dependencies are being dropped."
+ droppeddeps=yes
+ fi
+ ;;
+ esac
+ versuffix=$versuffix_save
+ major=$major_save
+ release=$release_save
+ libname=$libname_save
+ name=$name_save
+
+ case $host in
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # On Rhapsody replace the C library is the System framework
+ newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'`
+ ;;
+ esac
+
+ if test "$droppeddeps" = yes; then
+ if test "$module" = yes; then
+ $echo
+ $echo "*** Warning: libtool could not satisfy all declared inter-library"
+ $echo "*** dependencies of module $libname. Therefore, libtool will create"
+ $echo "*** a static module, that should work as long as the dlopening"
+ $echo "*** application is linked with the -dlopen flag."
+ if test -z "$global_symbol_pipe"; then
+ $echo
+ $echo "*** However, this would only work if libtool was able to extract symbol"
+ $echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+ $echo "*** not find such a program. So, this module is probably useless."
+ $echo "*** \`nm' from GNU binutils and a full rebuild may help."
+ fi
+ if test "$build_old_libs" = no; then
+ oldlibs="$output_objdir/$libname.$libext"
+ build_libtool_libs=module
+ build_old_libs=yes
+ else
+ build_libtool_libs=no
+ fi
+ else
+ $echo "*** The inter-library dependencies that have been dropped here will be"
+ $echo "*** automatically added whenever a program is linked with this library"
+ $echo "*** or is declared to -dlopen it."
+
+ if test "$allow_undefined" = no; then
+ $echo
+ $echo "*** Since this library must not contain undefined symbols,"
+ $echo "*** because either the platform does not support them or"
+ $echo "*** it was explicitly requested with -no-undefined,"
+ $echo "*** libtool will only create a static version of it."
+ if test "$build_old_libs" = no; then
+ oldlibs="$output_objdir/$libname.$libext"
+ build_libtool_libs=module
+ build_old_libs=yes
+ else
+ build_libtool_libs=no
+ fi
+ fi
+ fi
+ fi
+ # Done checking deplibs!
+ deplibs=$newdeplibs
+ fi
+
+
+ # move library search paths that coincide with paths to not yet
+ # installed libraries to the beginning of the library search list
+ new_libs=
+ for path in $notinst_path; do
+ case " $new_libs " in
+ *" -L$path/$objdir "*) ;;
+ *)
+ case " $deplibs " in
+ *" -L$path/$objdir "*)
+ new_libs="$new_libs -L$path/$objdir" ;;
+ esac
+ ;;
+ esac
+ done
+ for deplib in $deplibs; do
+ case $deplib in
+ -L*)
+ case " $new_libs " in
+ *" $deplib "*) ;;
+ *) new_libs="$new_libs $deplib" ;;
+ esac
+ ;;
+ *) new_libs="$new_libs $deplib" ;;
+ esac
+ done
+ deplibs="$new_libs"
+
+
+ # All the library-specific variables (install_libdir is set above).
+ library_names=
+ old_library=
+ dlname=
+
+ # Test again, we may have decided not to build it any more
+ if test "$build_libtool_libs" = yes; then
+ if test "$hardcode_into_libs" = yes; then
+ # Hardcode the library paths
+ hardcode_libdirs=
+ dep_rpath=
+ rpath="$finalize_rpath"
+ test "$mode" != relink && rpath="$compile_rpath$rpath"
+ for libdir in $rpath; do
+ if test -n "$hardcode_libdir_flag_spec"; then
+ if test -n "$hardcode_libdir_separator"; then
+ if test -z "$hardcode_libdirs"; then
+ hardcode_libdirs="$libdir"
+ else
+ # Just accumulate the unique libdirs.
+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+ ;;
+ *)
+ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+ ;;
+ esac
+ fi
+ else
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ dep_rpath="$dep_rpath $flag"
+ fi
+ elif test -n "$runpath_var"; then
+ case "$perm_rpath " in
+ *" $libdir "*) ;;
+ *) perm_rpath="$perm_rpath $libdir" ;;
+ esac
+ fi
+ done
+ # Substitute the hardcoded libdirs into the rpath.
+ if test -n "$hardcode_libdir_separator" &&
+ test -n "$hardcode_libdirs"; then
+ libdir="$hardcode_libdirs"
+ if test -n "$hardcode_libdir_flag_spec_ld"; then
+ eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
+ else
+ eval dep_rpath=\"$hardcode_libdir_flag_spec\"
+ fi
+ fi
+ if test -n "$runpath_var" && test -n "$perm_rpath"; then
+ # We should set the runpath_var.
+ rpath=
+ for dir in $perm_rpath; do
+ rpath="$rpath$dir:"
+ done
+ eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
+ fi
+ test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
+ fi
+
+ shlibpath="$finalize_shlibpath"
+ test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
+ if test -n "$shlibpath"; then
+ eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
+ fi
+
+ # Get the real and link names of the library.
+ eval shared_ext=\"$shrext_cmds\"
+ eval library_names=\"$library_names_spec\"
+ set dummy $library_names
+ realname="$2"
+ shift; shift
+
+ if test -n "$soname_spec"; then
+ eval soname=\"$soname_spec\"
+ else
+ soname="$realname"
+ fi
+ if test -z "$dlname"; then
+ dlname=$soname
+ fi
+
+ lib="$output_objdir/$realname"
+ linknames=
+ for link
+ do
+ linknames="$linknames $link"
+ done
+
+ # Use standard objects if they are pic
+ test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+
+ # Prepare the list of exported symbols
+ if test -z "$export_symbols"; then
+ if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
+ $show "generating symbol list for \`$libname.la'"
+ export_symbols="$output_objdir/$libname.exp"
+ $run $rm $export_symbols
+ cmds=$export_symbols_cmds
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ eval cmd=\"$cmd\"
+ if len=`expr "X$cmd" : ".*"` &&
+ test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+ $show "$cmd"
+ $run eval "$cmd" || exit $?
+ skipped_export=false
+ else
+ # The command line is too long to execute in one step.
+ $show "using reloadable object file for export list..."
+ skipped_export=:
+ # Break out early, otherwise skipped_export may be
+ # set to false by a later but shorter cmd.
+ break
+ fi
+ done
+ IFS="$save_ifs"
+ if test -n "$export_symbols_regex"; then
+ $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
+ $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+ $show "$mv \"${export_symbols}T\" \"$export_symbols\""
+ $run eval '$mv "${export_symbols}T" "$export_symbols"'
+ fi
+ fi
+ fi
+
+ if test -n "$export_symbols" && test -n "$include_expsyms"; then
+ $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'
+ fi
+
+ tmp_deplibs=
+ for test_deplib in $deplibs; do
+ case " $convenience " in
+ *" $test_deplib "*) ;;
+ *)
+ tmp_deplibs="$tmp_deplibs $test_deplib"
+ ;;
+ esac
+ done
+ deplibs="$tmp_deplibs"
+
+ if test -n "$convenience"; then
+ if test -n "$whole_archive_flag_spec"; then
+ save_libobjs=$libobjs
+ eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+ else
+ gentop="$output_objdir/${outputname}x"
+ generated="$generated $gentop"
+
+ func_extract_archives $gentop $convenience
+ libobjs="$libobjs $func_extract_archives_result"
+ fi
+ fi
+
+ if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
+ eval flag=\"$thread_safe_flag_spec\"
+ linker_flags="$linker_flags $flag"
+ fi
+
+ # Make a backup of the uninstalled library when relinking
+ if test "$mode" = relink; then
+ $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $?
+ fi
+
+ # Do each of the archive commands.
+ if test "$module" = yes && test -n "$module_cmds" ; then
+ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+ eval test_cmds=\"$module_expsym_cmds\"
+ cmds=$module_expsym_cmds
+ else
+ eval test_cmds=\"$module_cmds\"
+ cmds=$module_cmds
+ fi
+ else
+ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+ eval test_cmds=\"$archive_expsym_cmds\"
+ cmds=$archive_expsym_cmds
+ else
+ eval test_cmds=\"$archive_cmds\"
+ cmds=$archive_cmds
+ fi
+ fi
+
+ if test "X$skipped_export" != "X:" &&
+ len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
+ test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+ :
+ else
+ # The command line is too long to link in one step, link piecewise.
+ $echo "creating reloadable object files..."
+
+ # Save the value of $output and $libobjs because we want to
+ # use them later. If we have whole_archive_flag_spec, we
+ # want to use save_libobjs as it was before
+ # whole_archive_flag_spec was expanded, because we can't
+ # assume the linker understands whole_archive_flag_spec.
+ # This may have to be revisited, in case too many
+ # convenience libraries get linked in and end up exceeding
+ # the spec.
+ if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
+ save_libobjs=$libobjs
+ fi
+ save_output=$output
+ output_la=`$echo "X$output" | $Xsed -e "$basename"`
+
+ # Clear the reloadable object creation command queue and
+ # initialize k to one.
+ test_cmds=
+ concat_cmds=
+ objlist=
+ delfiles=
+ last_robj=
+ k=1
+ output=$output_objdir/$output_la-${k}.$objext
+ # Loop over the list of objects to be linked.
+ for obj in $save_libobjs
+ do
+ eval test_cmds=\"$reload_cmds $objlist $last_robj\"
+ if test "X$objlist" = X ||
+ { len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
+ test "$len" -le "$max_cmd_len"; }; then
+ objlist="$objlist $obj"
+ else
+ # The command $test_cmds is almost too long, add a
+ # command to the queue.
+ if test "$k" -eq 1 ; then
+ # The first file doesn't have a previous command to add.
+ eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
+ else
+ # All subsequent reloadable object files will link in
+ # the last one created.
+ eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\"
+ fi
+ last_robj=$output_objdir/$output_la-${k}.$objext
+ k=`expr $k + 1`
+ output=$output_objdir/$output_la-${k}.$objext
+ objlist=$obj
+ len=1
+ fi
+ done
+ # Handle the remaining objects by creating one last
+ # reloadable object file. All subsequent reloadable object
+ # files will link in the last one created.
+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+ eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
+
+ if ${skipped_export-false}; then
+ $show "generating symbol list for \`$libname.la'"
+ export_symbols="$output_objdir/$libname.exp"
+ $run $rm $export_symbols
+ libobjs=$output
+ # Append the command to create the export file.
+ eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\"
+ fi
+
+ # Set up a command to remove the reloadable object files
+ # after they are used.
+ i=0
+ while test "$i" -lt "$k"
+ do
+ i=`expr $i + 1`
+ delfiles="$delfiles $output_objdir/$output_la-${i}.$objext"
+ done
+
+ $echo "creating a temporary reloadable object file: $output"
+
+ # Loop through the commands generated above and execute them.
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $concat_cmds; do
+ IFS="$save_ifs"
+ $show "$cmd"
+ $run eval "$cmd" || exit $?
+ done
+ IFS="$save_ifs"
+
+ libobjs=$output
+ # Restore the value of output.
+ output=$save_output
+
+ if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
+ eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+ fi
+ # Expand the library linking commands again to reset the
+ # value of $libobjs for piecewise linking.
+
+ # Do each of the archive commands.
+ if test "$module" = yes && test -n "$module_cmds" ; then
+ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+ cmds=$module_expsym_cmds
+ else
+ cmds=$module_cmds
+ fi
+ else
+ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+ cmds=$archive_expsym_cmds
+ else
+ cmds=$archive_cmds
+ fi
+ fi
+
+ # Append the command to remove the reloadable object files
+ # to the just-reset $cmds.
+ eval cmds=\"\$cmds~\$rm $delfiles\"
+ fi
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ eval cmd=\"$cmd\"
+ $show "$cmd"
+ $run eval "$cmd" || {
+ lt_exit=$?
+
+ # Restore the uninstalled library and exit
+ if test "$mode" = relink; then
+ $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
+ fi
+
+ exit $lt_exit
+ }
+ done
+ IFS="$save_ifs"
+
+ # Restore the uninstalled library and exit
+ if test "$mode" = relink; then
+ $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
+
+ if test -n "$convenience"; then
+ if test -z "$whole_archive_flag_spec"; then
+ $show "${rm}r $gentop"
+ $run ${rm}r "$gentop"
+ fi
+ fi
+
+ exit $EXIT_SUCCESS
+ fi
+
+ # Create links to the real library.
+ for linkname in $linknames; do
+ if test "$realname" != "$linkname"; then
+ $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)"
+ $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $?
+ fi
+ done
+
+ # If -module or -export-dynamic was specified, set the dlname.
+ if test "$module" = yes || test "$export_dynamic" = yes; then
+ # On all known operating systems, these are identical.
+ dlname="$soname"
+ fi
+ fi
+ ;;
+
+ obj)
+ if test -n "$deplibs"; then
+ $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2
+ fi
+
+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+ $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
+ fi
+
+ if test -n "$rpath"; then
+ $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2
+ fi
+
+ if test -n "$xrpath"; then
+ $echo "$modename: warning: \`-R' is ignored for objects" 1>&2
+ fi
+
+ if test -n "$vinfo"; then
+ $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2
+ fi
+
+ if test -n "$release"; then
+ $echo "$modename: warning: \`-release' is ignored for objects" 1>&2
+ fi
+
+ case $output in
+ *.lo)
+ if test -n "$objs$old_deplibs"; then
+ $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
+ exit $EXIT_FAILURE
+ fi
+ libobj="$output"
+ obj=`$echo "X$output" | $Xsed -e "$lo2o"`
+ ;;
+ *)
+ libobj=
+ obj="$output"
+ ;;
+ esac
+
+ # Delete the old objects.
+ $run $rm $obj $libobj
+
+ # Objects from convenience libraries. This assumes
+ # single-version convenience libraries. Whenever we create
+ # different ones for PIC/non-PIC, this we'll have to duplicate
+ # the extraction.
+ reload_conv_objs=
+ gentop=
+ # reload_cmds runs $LD directly, so let us get rid of
+ # -Wl from whole_archive_flag_spec and hope we can get by with
+ # turning comma into space..
+ wl=
+
+ if test -n "$convenience"; then
+ if test -n "$whole_archive_flag_spec"; then
+ eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
+ reload_conv_objs=$reload_objs\ `$echo "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
+ else
+ gentop="$output_objdir/${obj}x"
+ generated="$generated $gentop"
+
+ func_extract_archives $gentop $convenience
+ reload_conv_objs="$reload_objs $func_extract_archives_result"
+ fi
+ fi
+
+ # Create the old-style object.
+ reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+
+ output="$obj"
+ cmds=$reload_cmds
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ eval cmd=\"$cmd\"
+ $show "$cmd"
+ $run eval "$cmd" || exit $?
+ done
+ IFS="$save_ifs"
+
+ # Exit if we aren't doing a library object file.
+ if test -z "$libobj"; then
+ if test -n "$gentop"; then
+ $show "${rm}r $gentop"
+ $run ${rm}r $gentop
+ fi
+
+ exit $EXIT_SUCCESS
+ fi
+
+ if test "$build_libtool_libs" != yes; then
+ if test -n "$gentop"; then
+ $show "${rm}r $gentop"
+ $run ${rm}r $gentop
+ fi
+
+ # Create an invalid libtool object if no PIC, so that we don't
+ # accidentally link it into a program.
+ # $show "echo timestamp > $libobj"
+ # $run eval "echo timestamp > $libobj" || exit $?
+ exit $EXIT_SUCCESS
+ fi
+
+ if test -n "$pic_flag" || test "$pic_mode" != default; then
+ # Only do commands if we really have different PIC objects.
+ reload_objs="$libobjs $reload_conv_objs"
+ output="$libobj"
+ cmds=$reload_cmds
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ eval cmd=\"$cmd\"
+ $show "$cmd"
+ $run eval "$cmd" || exit $?
+ done
+ IFS="$save_ifs"
+ fi
+
+ if test -n "$gentop"; then
+ $show "${rm}r $gentop"
+ $run ${rm}r $gentop
+ fi
+
+ exit $EXIT_SUCCESS
+ ;;
+
+ prog)
+ case $host in
+ *cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;;
+ esac
+ if test -n "$vinfo"; then
+ $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
+ fi
+
+ if test -n "$release"; then
+ $echo "$modename: warning: \`-release' is ignored for programs" 1>&2
+ fi
+
+ if test "$preload" = yes; then
+ if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown &&
+ test "$dlopen_self_static" = unknown; then
+ $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support."
+ fi
+ fi
+
+ case $host in
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # On Rhapsody replace the C library is the System framework
+ compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
+ finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
+ ;;
+ esac
+
+ case $host in
+ *darwin*)
+ # Don't allow lazy linking, it breaks C++ global constructors
+ if test "$tagname" = CXX ; then
+ compile_command="$compile_command ${wl}-bind_at_load"
+ finalize_command="$finalize_command ${wl}-bind_at_load"
+ fi
+ ;;
+ esac
+
+
+ # move library search paths that coincide with paths to not yet
+ # installed libraries to the beginning of the library search list
+ new_libs=
+ for path in $notinst_path; do
+ case " $new_libs " in
+ *" -L$path/$objdir "*) ;;
+ *)
+ case " $compile_deplibs " in
+ *" -L$path/$objdir "*)
+ new_libs="$new_libs -L$path/$objdir" ;;
+ esac
+ ;;
+ esac
+ done
+ for deplib in $compile_deplibs; do
+ case $deplib in
+ -L*)
+ case " $new_libs " in
+ *" $deplib "*) ;;
+ *) new_libs="$new_libs $deplib" ;;
+ esac
+ ;;
+ *) new_libs="$new_libs $deplib" ;;
+ esac
+ done
+ compile_deplibs="$new_libs"
+
+
+ compile_command="$compile_command $compile_deplibs"
+ finalize_command="$finalize_command $finalize_deplibs"
+
+ if test -n "$rpath$xrpath"; then
+ # If the user specified any rpath flags, then add them.
+ for libdir in $rpath $xrpath; do
+ # This is the magic to use -rpath.
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) finalize_rpath="$finalize_rpath $libdir" ;;
+ esac
+ done
+ fi
+
+ # Now hardcode the library paths
+ rpath=
+ hardcode_libdirs=
+ for libdir in $compile_rpath $finalize_rpath; do
+ if test -n "$hardcode_libdir_flag_spec"; then
+ if test -n "$hardcode_libdir_separator"; then
+ if test -z "$hardcode_libdirs"; then
+ hardcode_libdirs="$libdir"
+ else
+ # Just accumulate the unique libdirs.
+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+ ;;
+ *)
+ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+ ;;
+ esac
+ fi
+ else
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ rpath="$rpath $flag"
+ fi
+ elif test -n "$runpath_var"; then
+ case "$perm_rpath " in
+ *" $libdir "*) ;;
+ *) perm_rpath="$perm_rpath $libdir" ;;
+ esac
+ fi
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+ testbindir=`$echo "X$libdir" | $Xsed -e 's*/lib$*/bin*'`
+ case :$dllsearchpath: in
+ *":$libdir:"*) ;;
+ *) dllsearchpath="$dllsearchpath:$libdir";;
+ esac
+ case :$dllsearchpath: in
+ *":$testbindir:"*) ;;
+ *) dllsearchpath="$dllsearchpath:$testbindir";;
+ esac
+ ;;
+ esac
+ done
+ # Substitute the hardcoded libdirs into the rpath.
+ if test -n "$hardcode_libdir_separator" &&
+ test -n "$hardcode_libdirs"; then
+ libdir="$hardcode_libdirs"
+ eval rpath=\" $hardcode_libdir_flag_spec\"
+ fi
+ compile_rpath="$rpath"
+
+ rpath=
+ hardcode_libdirs=
+ for libdir in $finalize_rpath; do
+ if test -n "$hardcode_libdir_flag_spec"; then
+ if test -n "$hardcode_libdir_separator"; then
+ if test -z "$hardcode_libdirs"; then
+ hardcode_libdirs="$libdir"
+ else
+ # Just accumulate the unique libdirs.
+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+ ;;
+ *)
+ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+ ;;
+ esac
+ fi
+ else
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ rpath="$rpath $flag"
+ fi
+ elif test -n "$runpath_var"; then
+ case "$finalize_perm_rpath " in
+ *" $libdir "*) ;;
+ *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
+ esac
+ fi
+ done
+ # Substitute the hardcoded libdirs into the rpath.
+ if test -n "$hardcode_libdir_separator" &&
+ test -n "$hardcode_libdirs"; then
+ libdir="$hardcode_libdirs"
+ eval rpath=\" $hardcode_libdir_flag_spec\"
+ fi
+ finalize_rpath="$rpath"
+
+ if test -n "$libobjs" && test "$build_old_libs" = yes; then
+ # Transform all the library objects into standard objects.
+ compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+ finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+ fi
+
+ dlsyms=
+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+ if test -n "$NM" && test -n "$global_symbol_pipe"; then
+ dlsyms="${outputname}S.c"
+ else
+ $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2
+ fi
+ fi
+
+ if test -n "$dlsyms"; then
+ case $dlsyms in
+ "") ;;
+ *.c)
+ # Discover the nlist of each of the dlfiles.
+ nlist="$output_objdir/${outputname}.nm"
+
+ $show "$rm $nlist ${nlist}S ${nlist}T"
+ $run $rm "$nlist" "${nlist}S" "${nlist}T"
+
+ # Parse the name list into a source file.
+ $show "creating $output_objdir/$dlsyms"
+
+ test -z "$run" && $echo > "$output_objdir/$dlsyms" "\
+/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */
+/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */
+
+#ifdef __cplusplus
+extern \"C\" {
+#endif
+
+/* Prevent the only kind of declaration conflicts we can make. */
+#define lt_preloaded_symbols some_other_symbol
+
+/* External symbol declarations for the compiler. */\
+"
+
+ if test "$dlself" = yes; then
+ $show "generating symbol list for \`$output'"
+
+ test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"
+
+ # Add our own program objects to the symbol list.
+ progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+ for arg in $progfiles; do
+ $show "extracting global C symbols from \`$arg'"
+ $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
+ done
+
+ if test -n "$exclude_expsyms"; then
+ $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
+ $run eval '$mv "$nlist"T "$nlist"'
+ fi
+
+ if test -n "$export_symbols_regex"; then
+ $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
+ $run eval '$mv "$nlist"T "$nlist"'
+ fi
+
+ # Prepare the list of exported symbols
+ if test -z "$export_symbols"; then
+ export_symbols="$output_objdir/$outputname.exp"
+ $run $rm $export_symbols
+ $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+ case $host in
+ *cygwin* | *mingw* )
+ $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+ $run eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
+ ;;
+ esac
+ else
+ $run eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+ $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
+ $run eval 'mv "$nlist"T "$nlist"'
+ case $host in
+ *cygwin* | *mingw* )
+ $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+ $run eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
+ ;;
+ esac
+ fi
+ fi
+
+ for arg in $dlprefiles; do
+ $show "extracting global C symbols from \`$arg'"
+ name=`$echo "$arg" | ${SED} -e 's%^.*/%%'`
+ $run eval '$echo ": $name " >> "$nlist"'
+ $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
+ done
+
+ if test -z "$run"; then
+ # Make sure we have at least an empty file.
+ test -f "$nlist" || : > "$nlist"
+
+ if test -n "$exclude_expsyms"; then
+ $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+ $mv "$nlist"T "$nlist"
+ fi
+
+ # Try sorting and uniquifying the output.
+ if grep -v "^: " < "$nlist" |
+ if sort -k 3 </dev/null >/dev/null 2>&1; then
+ sort -k 3
+ else
+ sort +2
+ fi |
+ uniq > "$nlist"S; then
+ :
+ else
+ grep -v "^: " < "$nlist" > "$nlist"S
+ fi
+
+ if test -f "$nlist"S; then
+ eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'
+ else
+ $echo '/* NONE */' >> "$output_objdir/$dlsyms"
+ fi
+
+ $echo >> "$output_objdir/$dlsyms" "\
+
+#undef lt_preloaded_symbols
+
+#if defined (__STDC__) && __STDC__
+# define lt_ptr void *
+#else
+# define lt_ptr char *
+# define const
+#endif
+
+/* The mapping between symbol names and symbols. */
+"
+
+ case $host in
+ *cygwin* | *mingw* )
+ $echo >> "$output_objdir/$dlsyms" "\
+/* DATA imports from DLLs on WIN32 can't be const, because
+ runtime relocations are performed -- see ld's documentation
+ on pseudo-relocs */
+struct {
+"
+ ;;
+ * )
+ $echo >> "$output_objdir/$dlsyms" "\
+const struct {
+"
+ ;;
+ esac
+
+
+ $echo >> "$output_objdir/$dlsyms" "\
+ const char *name;
+ lt_ptr address;
+}
+lt_preloaded_symbols[] =
+{\
+"
+
+ eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms"
+
+ $echo >> "$output_objdir/$dlsyms" "\
+ {0, (lt_ptr) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+ return lt_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif\
+"
+ fi
+
+ pic_flag_for_symtable=
+ case $host in
+ # compiling the symbol table file with pic_flag works around
+ # a FreeBSD bug that causes programs to crash when -lm is
+ # linked before any other PIC object. But we must not use
+ # pic_flag when linking with -static. The problem exists in
+ # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
+ *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+ case "$compile_command " in
+ *" -static "*) ;;
+ *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";;
+ esac;;
+ *-*-hpux*)
+ case "$compile_command " in
+ *" -static "*) ;;
+ *) pic_flag_for_symtable=" $pic_flag";;
+ esac
+ esac
+
+ # Now compile the dynamic symbol file.
+ $show "(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
+ $run eval '(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
+
+ # Clean up the generated files.
+ $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
+ $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
+
+ # Transform the symbol file into the correct name.
+ case $host in
+ *cygwin* | *mingw* )
+ if test -f "$output_objdir/${outputname}.def" ; then
+ compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP`
+ finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP`
+ else
+ compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
+ finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
+ fi
+ ;;
+ * )
+ compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
+ finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
+ ;;
+ esac
+ ;;
+ *)
+ $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
+ exit $EXIT_FAILURE
+ ;;
+ esac
+ else
+ # We keep going just in case the user didn't refer to
+ # lt_preloaded_symbols. The linker will fail if global_symbol_pipe
+ # really was required.
+
+ # Nullify the symbol file.
+ compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP`
+ finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP`
+ fi
+
+ if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
+ # Replace the output file specification.
+ compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$output"'%g' | $NL2SP`
+ link_command="$compile_command$compile_rpath"
+
+ # We have no uninstalled library dependencies, so finalize right now.
+ $show "$link_command"
+ $run eval "$link_command"
+ exit_status=$?
+
+ # Delete the generated files.
+ if test -n "$dlsyms"; then
+ $show "$rm $output_objdir/${outputname}S.${objext}"
+ $run $rm "$output_objdir/${outputname}S.${objext}"
+ fi
+
+ exit $exit_status
+ fi
+
+ if test -n "$shlibpath_var"; then
+ # We should set the shlibpath_var
+ rpath=
+ for dir in $temp_rpath; do
+ case $dir in
+ [\\/]* | [A-Za-z]:[\\/]*)
+ # Absolute path.
+ rpath="$rpath$dir:"
+ ;;
+ *)
+ # Relative path: add a thisdir entry.
+ rpath="$rpath\$thisdir/$dir:"
+ ;;
+ esac
+ done
+ temp_rpath="$rpath"
+ fi
+
+ if test -n "$compile_shlibpath$finalize_shlibpath"; then
+ compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
+ fi
+ if test -n "$finalize_shlibpath"; then
+ finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
+ fi
+
+ compile_var=
+ finalize_var=
+ if test -n "$runpath_var"; then
+ if test -n "$perm_rpath"; then
+ # We should set the runpath_var.
+ rpath=
+ for dir in $perm_rpath; do
+ rpath="$rpath$dir:"
+ done
+ compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
+ fi
+ if test -n "$finalize_perm_rpath"; then
+ # We should set the runpath_var.
+ rpath=
+ for dir in $finalize_perm_rpath; do
+ rpath="$rpath$dir:"
+ done
+ finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
+ fi
+ fi
+
+ if test "$no_install" = yes; then
+ # We don't need to create a wrapper script.
+ link_command="$compile_var$compile_command$compile_rpath"
+ # Replace the output file specification.
+ link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+ # Delete the old output file.
+ $run $rm $output
+ # Link the executable and exit
+ $show "$link_command"
+ $run eval "$link_command" || exit $?
+ exit $EXIT_SUCCESS
+ fi
+
+ if test "$hardcode_action" = relink; then
+ # Fast installation is not supported
+ link_command="$compile_var$compile_command$compile_rpath"
+ relink_command="$finalize_var$finalize_command$finalize_rpath"
+
+ $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2
+ $echo "$modename: \`$output' will be relinked during installation" 1>&2
+ else
+ if test "$fast_install" != no; then
+ link_command="$finalize_var$compile_command$finalize_rpath"
+ if test "$fast_install" = yes; then
+ relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $SP2NL | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g' | $NL2SP`
+ else
+ # fast_install is set to needless
+ relink_command=
+ fi
+ else
+ link_command="$compile_var$compile_command$compile_rpath"
+ relink_command="$finalize_var$finalize_command$finalize_rpath"
+ fi
+ fi
+
+ # Replace the output file specification.
+ link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+
+ # Delete the old output files.
+ $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname
+
+ $show "$link_command"
+ $run eval "$link_command" || exit $?
+
+ # Now create the wrapper script.
+ $show "creating $output"
+
+ # Quote the relink command for shipping.
+ if test -n "$relink_command"; then
+ # Preserve any variables that may affect compiler behavior
+ for var in $variables_saved_for_relink; do
+ if eval test -z \"\${$var+set}\"; then
+ relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
+ elif eval var_value=\$$var; test -z "$var_value"; then
+ relink_command="$var=; export $var; $relink_command"
+ else
+ var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
+ relink_command="$var=\"$var_value\"; export $var; $relink_command"
+ fi
+ done
+ relink_command="(cd `pwd`; $relink_command)"
+ relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP`
+ fi
+
+ # Quote $echo for shipping.
+ if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then
+ case $progpath in
+ [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
+ *) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
+ esac
+ qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
+ else
+ qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
+ fi
+
+ # Only actually do things if our run command is non-null.
+ if test -z "$run"; then
+ # win32 will think the script is a binary if it has
+ # a .exe suffix, so we strip it off here.
+ case $output in
+ *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;;
+ esac
+ # test for cygwin because mv fails w/o .exe extensions
+ case $host in
+ *cygwin*)
+ exeext=.exe
+ outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;;
+ *) exeext= ;;
+ esac
+ case $host in
+ *cygwin* | *mingw* )
+ output_name=`basename $output`
+ output_path=`dirname $output`
+ cwrappersource="$output_path/$objdir/lt-$output_name.c"
+ cwrapper="$output_path/$output_name.exe"
+ $rm $cwrappersource $cwrapper
+ trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
+
+ cat > $cwrappersource <<EOF
+
+/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
+ Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+
+ The $output program cannot be directly executed until all the libtool
+ libraries that it depends on are installed.
+
+ This wrapper executable should never be moved out of the build directory.
+ If it is, it will not operate correctly.
+
+ Currently, it simply execs the wrapper *script* "/bin/sh $output",
+ but could eventually absorb all of the scripts functionality and
+ exec $objdir/$outputname directly.
+*/
+EOF
+ cat >> $cwrappersource<<"EOF"
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <malloc.h>
+#include <stdarg.h>
+#include <assert.h>
+#include <string.h>
+#include <ctype.h>
+#include <sys/stat.h>
+
+#if defined(PATH_MAX)
+# define LT_PATHMAX PATH_MAX
+#elif defined(MAXPATHLEN)
+# define LT_PATHMAX MAXPATHLEN
+#else
+# define LT_PATHMAX 1024
+#endif
+
+#ifndef DIR_SEPARATOR
+# define DIR_SEPARATOR '/'
+# define PATH_SEPARATOR ':'
+#endif
+
+#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
+ defined (__OS2__)
+# define HAVE_DOS_BASED_FILE_SYSTEM
+# ifndef DIR_SEPARATOR_2
+# define DIR_SEPARATOR_2 '\\'
+# endif
+# ifndef PATH_SEPARATOR_2
+# define PATH_SEPARATOR_2 ';'
+# endif
+#endif
+
+#ifndef DIR_SEPARATOR_2
+# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
+#else /* DIR_SEPARATOR_2 */
+# define IS_DIR_SEPARATOR(ch) \
+ (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
+#endif /* DIR_SEPARATOR_2 */
+
+#ifndef PATH_SEPARATOR_2
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
+#else /* PATH_SEPARATOR_2 */
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
+#endif /* PATH_SEPARATOR_2 */
+
+#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type)))
+#define XFREE(stale) do { \
+ if (stale) { free ((void *) stale); stale = 0; } \
+} while (0)
+
+/* -DDEBUG is fairly common in CFLAGS. */
+#undef DEBUG
+#if defined DEBUGWRAPPER
+# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__)
+#else
+# define DEBUG(format, ...)
+#endif
+
+const char *program_name = NULL;
+
+void * xmalloc (size_t num);
+char * xstrdup (const char *string);
+const char * base_name (const char *name);
+char * find_executable(const char *wrapper);
+int check_executable(const char *path);
+char * strendzap(char *str, const char *pat);
+void lt_fatal (const char *message, ...);
+
+int
+main (int argc, char *argv[])
+{
+ char **newargz;
+ int i;
+
+ program_name = (char *) xstrdup (base_name (argv[0]));
+ DEBUG("(main) argv[0] : %s\n",argv[0]);
+ DEBUG("(main) program_name : %s\n",program_name);
+ newargz = XMALLOC(char *, argc+2);
+EOF
+
+ cat >> $cwrappersource <<EOF
+ newargz[0] = (char *) xstrdup("$SHELL");
+EOF
+
+ cat >> $cwrappersource <<"EOF"
+ newargz[1] = find_executable(argv[0]);
+ if (newargz[1] == NULL)
+ lt_fatal("Couldn't find %s", argv[0]);
+ DEBUG("(main) found exe at : %s\n",newargz[1]);
+ /* we know the script has the same name, without the .exe */
+ /* so make sure newargz[1] doesn't end in .exe */
+ strendzap(newargz[1],".exe");
+ for (i = 1; i < argc; i++)
+ newargz[i+1] = xstrdup(argv[i]);
+ newargz[argc+1] = NULL;
+
+ for (i=0; i<argc+1; i++)
+ {
+ DEBUG("(main) newargz[%d] : %s\n",i,newargz[i]);
+ ;
+ }
+
+EOF
+
+ case $host_os in
+ mingw*)
+ cat >> $cwrappersource <<EOF
+ execv("$SHELL",(char const **)newargz);
+EOF
+ ;;
+ *)
+ cat >> $cwrappersource <<EOF
+ execv("$SHELL",newargz);
+EOF
+ ;;
+ esac
+
+ cat >> $cwrappersource <<"EOF"
+ return 127;
+}
+
+void *
+xmalloc (size_t num)
+{
+ void * p = (void *) malloc (num);
+ if (!p)
+ lt_fatal ("Memory exhausted");
+
+ return p;
+}
+
+char *
+xstrdup (const char *string)
+{
+ return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL
+;
+}
+
+const char *
+base_name (const char *name)
+{
+ const char *base;
+
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+ /* Skip over the disk name in MSDOS pathnames. */
+ if (isalpha ((unsigned char)name[0]) && name[1] == ':')
+ name += 2;
+#endif
+
+ for (base = name; *name; name++)
+ if (IS_DIR_SEPARATOR (*name))
+ base = name + 1;
+ return base;
+}
+
+int
+check_executable(const char * path)
+{
+ struct stat st;
+
+ DEBUG("(check_executable) : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!");
+ if ((!path) || (!*path))
+ return 0;
+
+ if ((stat (path, &st) >= 0) &&
+ (
+ /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */
+#if defined (S_IXOTH)
+ ((st.st_mode & S_IXOTH) == S_IXOTH) ||
+#endif
+#if defined (S_IXGRP)
+ ((st.st_mode & S_IXGRP) == S_IXGRP) ||
+#endif
+ ((st.st_mode & S_IXUSR) == S_IXUSR))
+ )
+ return 1;
+ else
+ return 0;
+}
+
+/* Searches for the full path of the wrapper. Returns
+ newly allocated full path name if found, NULL otherwise */
+char *
+find_executable (const char* wrapper)
+{
+ int has_slash = 0;
+ const char* p;
+ const char* p_next;
+ /* static buffer for getcwd */
+ char tmp[LT_PATHMAX + 1];
+ int tmp_len;
+ char* concat_name;
+
+ DEBUG("(find_executable) : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!");
+
+ if ((wrapper == NULL) || (*wrapper == '\0'))
+ return NULL;
+
+ /* Absolute path? */
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+ if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':')
+ {
+ concat_name = xstrdup (wrapper);
+ if (check_executable(concat_name))
+ return concat_name;
+ XFREE(concat_name);
+ }
+ else
+ {
+#endif
+ if (IS_DIR_SEPARATOR (wrapper[0]))
+ {
+ concat_name = xstrdup (wrapper);
+ if (check_executable(concat_name))
+ return concat_name;
+ XFREE(concat_name);
+ }
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+ }
+#endif
+
+ for (p = wrapper; *p; p++)
+ if (*p == '/')
+ {
+ has_slash = 1;
+ break;
+ }
+ if (!has_slash)
+ {
+ /* no slashes; search PATH */
+ const char* path = getenv ("PATH");
+ if (path != NULL)
+ {
+ for (p = path; *p; p = p_next)
+ {
+ const char* q;
+ size_t p_len;
+ for (q = p; *q; q++)
+ if (IS_PATH_SEPARATOR(*q))
+ break;
+ p_len = q - p;
+ p_next = (*q == '\0' ? q : q + 1);
+ if (p_len == 0)
+ {
+ /* empty path: current directory */
+ if (getcwd (tmp, LT_PATHMAX) == NULL)
+ lt_fatal ("getcwd failed");
+ tmp_len = strlen(tmp);
+ concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
+ memcpy (concat_name, tmp, tmp_len);
+ concat_name[tmp_len] = '/';
+ strcpy (concat_name + tmp_len + 1, wrapper);
+ }
+ else
+ {
+ concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1);
+ memcpy (concat_name, p, p_len);
+ concat_name[p_len] = '/';
+ strcpy (concat_name + p_len + 1, wrapper);
+ }
+ if (check_executable(concat_name))
+ return concat_name;
+ XFREE(concat_name);
+ }
+ }
+ /* not found in PATH; assume curdir */
+ }
+ /* Relative path | not found in path: prepend cwd */
+ if (getcwd (tmp, LT_PATHMAX) == NULL)
+ lt_fatal ("getcwd failed");
+ tmp_len = strlen(tmp);
+ concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
+ memcpy (concat_name, tmp, tmp_len);
+ concat_name[tmp_len] = '/';
+ strcpy (concat_name + tmp_len + 1, wrapper);
+
+ if (check_executable(concat_name))
+ return concat_name;
+ XFREE(concat_name);
+ return NULL;
+}
+
+char *
+strendzap(char *str, const char *pat)
+{
+ size_t len, patlen;
+
+ assert(str != NULL);
+ assert(pat != NULL);
+
+ len = strlen(str);
+ patlen = strlen(pat);
+
+ if (patlen <= len)
+ {
+ str += len - patlen;
+ if (strcmp(str, pat) == 0)
+ *str = '\0';
+ }
+ return str;
+}
+
+static void
+lt_error_core (int exit_status, const char * mode,
+ const char * message, va_list ap)
+{
+ fprintf (stderr, "%s: %s: ", program_name, mode);
+ vfprintf (stderr, message, ap);
+ fprintf (stderr, ".\n");
+
+ if (exit_status >= 0)
+ exit (exit_status);
+}
+
+void
+lt_fatal (const char *message, ...)
+{
+ va_list ap;
+ va_start (ap, message);
+ lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
+ va_end (ap);
+}
+EOF
+ # we should really use a build-platform specific compiler
+ # here, but OTOH, the wrappers (shell script and this C one)
+ # are only useful if you want to execute the "real" binary.
+ # Since the "real" binary is built for $host, then this
+ # wrapper might as well be built for $host, too.
+ $run $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource
+ ;;
+ esac
+ $rm $output
+ trap "$rm $output; exit $EXIT_FAILURE" 1 2 15
+
+ $echo > $output "\
+#! $SHELL
+
+# $output - temporary wrapper script for $objdir/$outputname
+# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+#
+# The $output program cannot be directly executed until all the libtool
+# libraries that it depends on are installed.
+#
+# This wrapper script should never be moved out of the build directory.
+# If it is, it will not operate correctly.
+
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='${SED} -e 1s/^X//'
+sed_quote_subst='$sed_quote_subst'
+
+# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
+if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '\${1+\"\$@\"}'='\"\$@\"'
+ setopt NO_GLOB_SUBST
+else
+ case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
+fi
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+relink_command=\"$relink_command\"
+
+# This environment variable determines our operation mode.
+if test \"\$libtool_install_magic\" = \"$magic\"; then
+ # install mode needs the following variable:
+ notinst_deplibs='$notinst_deplibs'
+else
+ # When we are sourced in execute mode, \$file and \$echo are already set.
+ if test \"\$libtool_execute_magic\" != \"$magic\"; then
+ echo=\"$qecho\"
+ file=\"\$0\"
+ # Make sure echo works.
+ if test \"X\$1\" = X--no-reexec; then
+ # Discard the --no-reexec flag, and continue.
+ shift
+ elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then
+ # Yippee, \$echo works!
+ :
+ else
+ # Restart under the correct shell, and then maybe \$echo will work.
+ exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
+ fi
+ fi\
+"
+ $echo >> $output "\
+
+ # Find the directory that this script lives in.
+ thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
+ test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+
+ # Follow symbolic links until we get to the real thisdir.
+ file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
+ while test -n \"\$file\"; do
+ destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
+
+ # If there was a directory component, then change thisdir.
+ if test \"x\$destdir\" != \"x\$file\"; then
+ case \"\$destdir\" in
+ [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
+ *) thisdir=\"\$thisdir/\$destdir\" ;;
+ esac
+ fi
+
+ file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
+ file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
+ done
+
+ # Try to get the absolute directory name.
+ absdir=\`cd \"\$thisdir\" && pwd\`
+ test -n \"\$absdir\" && thisdir=\"\$absdir\"
+"
+
+ if test "$fast_install" = yes; then
+ $echo >> $output "\
+ program=lt-'$outputname'$exeext
+ progdir=\"\$thisdir/$objdir\"
+
+ if test ! -f \"\$progdir/\$program\" || \\
+ { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
+ test \"X\$file\" != \"X\$progdir/\$program\"; }; then
+
+ file=\"\$\$-\$program\"
+
+ if test ! -d \"\$progdir\"; then
+ $mkdir \"\$progdir\"
+ else
+ $rm \"\$progdir/\$file\"
+ fi"
+
+ $echo >> $output "\
+
+ # relink executable if necessary
+ if test -n \"\$relink_command\"; then
+ if relink_command_output=\`eval \$relink_command 2>&1\`; then :
+ else
+ $echo \"\$relink_command_output\" >&2
+ $rm \"\$progdir/\$file\"
+ exit $EXIT_FAILURE
+ fi
+ fi
+
+ $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
+ { $rm \"\$progdir/\$program\";
+ $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; }
+ $rm \"\$progdir/\$file\"
+ fi"
+ else
+ $echo >> $output "\
+ program='$outputname'
+ progdir=\"\$thisdir/$objdir\"
+"
+ fi
+
+ $echo >> $output "\
+
+ if test -f \"\$progdir/\$program\"; then"
+
+ # Export our shlibpath_var if we have one.
+ if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+ $echo >> $output "\
+ # Add our own library path to $shlibpath_var
+ $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
+
+ # Some systems cannot cope with colon-terminated $shlibpath_var
+ # The second colon is a workaround for a bug in BeOS R4 sed
+ $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
+
+ export $shlibpath_var
+"
+ fi
+
+ # fixup the dll searchpath if we need to.
+ if test -n "$dllsearchpath"; then
+ $echo >> $output "\
+ # Add the dll search path components to the executable PATH
+ PATH=$dllsearchpath:\$PATH
+"
+ fi
+
+ $echo >> $output "\
+ if test \"\$libtool_execute_magic\" != \"$magic\"; then
+ # Run the actual program with our arguments.
+"
+ case $host in
+ # Backslashes separate directories on plain windows
+ *-*-mingw | *-*-os2*)
+ $echo >> $output "\
+ exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+"
+ ;;
+
+ *)
+ $echo >> $output "\
+ exec \"\$progdir/\$program\" \${1+\"\$@\"}
+"
+ ;;
+ esac
+ $echo >> $output "\
+ \$echo \"\$0: cannot exec \$program \$*\"
+ exit $EXIT_FAILURE
+ fi
+ else
+ # The program doesn't exist.
+ \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
+ \$echo \"This script is just a wrapper for \$program.\" 1>&2
+ $echo \"See the $PACKAGE documentation for more information.\" 1>&2
+ exit $EXIT_FAILURE
+ fi
+fi\
+"
+ chmod +x $output
+ fi
+ exit $EXIT_SUCCESS
+ ;;
+ esac
+
+ # See if we need to build an old-fashioned archive.
+ for oldlib in $oldlibs; do
+
+ if test "$build_libtool_libs" = convenience; then
+ oldobjs="$libobjs_save"
+ addlibs="$convenience"
+ build_libtool_libs=no
+ else
+ if test "$build_libtool_libs" = module; then
+ oldobjs="$libobjs_save"
+ build_libtool_libs=no
+ else
+ oldobjs="$old_deplibs $non_pic_objects"
+ fi
+ addlibs="$old_convenience"
+ fi
+
+ if test -n "$addlibs"; then
+ gentop="$output_objdir/${outputname}x"
+ generated="$generated $gentop"
+
+ func_extract_archives $gentop $addlibs
+ oldobjs="$oldobjs $func_extract_archives_result"
+ fi
+
+ # Do each command in the archive commands.
+ if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
+ cmds=$old_archive_from_new_cmds
+ else
+ # POSIX demands no paths to be encoded in archives. We have
+ # to avoid creating archives with duplicate basenames if we
+ # might have to extract them afterwards, e.g., when creating a
+ # static archive out of a convenience library, or when linking
+ # the entirety of a libtool archive into another (currently
+ # not supported by libtool).
+ if (for obj in $oldobjs
+ do
+ $echo "X$obj" | $Xsed -e 's%^.*/%%'
+ done | sort | sort -uc >/dev/null 2>&1); then
+ :
+ else
+ $echo "copying selected object files to avoid basename conflicts..."
+
+ if test -z "$gentop"; then
+ gentop="$output_objdir/${outputname}x"
+ generated="$generated $gentop"
+
+ $show "${rm}r $gentop"
+ $run ${rm}r "$gentop"
+ $show "$mkdir $gentop"
+ $run $mkdir "$gentop"
+ exit_status=$?
+ if test "$exit_status" -ne 0 && test ! -d "$gentop"; then
+ exit $exit_status
+ fi
+ fi
+
+ save_oldobjs=$oldobjs
+ oldobjs=
+ counter=1
+ for obj in $save_oldobjs
+ do
+ objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
+ case " $oldobjs " in
+ " ") oldobjs=$obj ;;
+ *[\ /]"$objbase "*)
+ while :; do
+ # Make sure we don't pick an alternate name that also
+ # overlaps.
+ newobj=lt$counter-$objbase
+ counter=`expr $counter + 1`
+ case " $oldobjs " in
+ *[\ /]"$newobj "*) ;;
+ *) if test ! -f "$gentop/$newobj"; then break; fi ;;
+ esac
+ done
+ $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
+ $run ln "$obj" "$gentop/$newobj" ||
+ $run cp "$obj" "$gentop/$newobj"
+ oldobjs="$oldobjs $gentop/$newobj"
+ ;;
+ *) oldobjs="$oldobjs $obj" ;;
+ esac
+ done
+ fi
+
+ eval cmds=\"$old_archive_cmds\"
+
+ if len=`expr "X$cmds" : ".*"` &&
+ test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+ cmds=$old_archive_cmds
+ else
+ # the command line is too long to link in one step, link in parts
+ $echo "using piecewise archive linking..."
+ save_RANLIB=$RANLIB
+ RANLIB=:
+ objlist=
+ concat_cmds=
+ save_oldobjs=$oldobjs
+
+ # Is there a better way of finding the last object in the list?
+ for obj in $save_oldobjs
+ do
+ last_oldobj=$obj
+ done
+ for obj in $save_oldobjs
+ do
+ oldobjs="$objlist $obj"
+ objlist="$objlist $obj"
+ eval test_cmds=\"$old_archive_cmds\"
+ if len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
+ test "$len" -le "$max_cmd_len"; then
+ :
+ else
+ # the above command should be used before it gets too long
+ oldobjs=$objlist
+ if test "$obj" = "$last_oldobj" ; then
+ RANLIB=$save_RANLIB
+ fi
+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+ eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
+ objlist=
+ fi
+ done
+ RANLIB=$save_RANLIB
+ oldobjs=$objlist
+ if test "X$oldobjs" = "X" ; then
+ eval cmds=\"\$concat_cmds\"
+ else
+ eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
+ fi
+ fi
+ fi
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ eval cmd=\"$cmd\"
+ IFS="$save_ifs"
+ $show "$cmd"
+ $run eval "$cmd" || exit $?
+ done
+ IFS="$save_ifs"
+ done
+
+ if test -n "$generated"; then
+ $show "${rm}r$generated"
+ $run ${rm}r$generated
+ fi
+
+ # Now create the libtool archive.
+ case $output in
+ *.la)
+ old_library=
+ test "$build_old_libs" = yes && old_library="$libname.$libext"
+ $show "creating $output"
+
+ # Preserve any variables that may affect compiler behavior
+ for var in $variables_saved_for_relink; do
+ if eval test -z \"\${$var+set}\"; then
+ relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
+ elif eval var_value=\$$var; test -z "$var_value"; then
+ relink_command="$var=; export $var; $relink_command"
+ else
+ var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
+ relink_command="$var=\"$var_value\"; export $var; $relink_command"
+ fi
+ done
+ # Quote the link command for shipping.
+ relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
+ relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP`
+ if test "$hardcode_automatic" = yes ; then
+ relink_command=
+ fi
+
+
+ # Only create the output if not a dry run.
+ if test -z "$run"; then
+ for installed in no yes; do
+ if test "$installed" = yes; then
+ if test -z "$install_libdir"; then
+ break
+ fi
+ output="$output_objdir/$outputname"i
+ # Replace all uninstalled libtool libraries with the installed ones
+ newdependency_libs=
+ for deplib in $dependency_libs; do
+ case $deplib in
+ *.la)
+ name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+ if test -z "$libdir"; then
+ $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
+ exit $EXIT_FAILURE
+ fi
+ newdependency_libs="$newdependency_libs $libdir/$name"
+ ;;
+ *) newdependency_libs="$newdependency_libs $deplib" ;;
+ esac
+ done
+ dependency_libs="$newdependency_libs"
+ newdlfiles=
+ for lib in $dlfiles; do
+ name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ if test -z "$libdir"; then
+ $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+ exit $EXIT_FAILURE
+ fi
+ newdlfiles="$newdlfiles $libdir/$name"
+ done
+ dlfiles="$newdlfiles"
+ newdlprefiles=
+ for lib in $dlprefiles; do
+ name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ if test -z "$libdir"; then
+ $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+ exit $EXIT_FAILURE
+ fi
+ newdlprefiles="$newdlprefiles $libdir/$name"
+ done
+ dlprefiles="$newdlprefiles"
+ else
+ newdlfiles=
+ for lib in $dlfiles; do
+ case $lib in
+ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+ *) abs=`pwd`"/$lib" ;;
+ esac
+ newdlfiles="$newdlfiles $abs"
+ done
+ dlfiles="$newdlfiles"
+ newdlprefiles=
+ for lib in $dlprefiles; do
+ case $lib in
+ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+ *) abs=`pwd`"/$lib" ;;
+ esac
+ newdlprefiles="$newdlprefiles $abs"
+ done
+ dlprefiles="$newdlprefiles"
+ fi
+ $rm $output
+ # place dlname in correct position for cygwin
+ tdlname=$dlname
+ case $host,$output,$installed,$module,$dlname in
+ *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
+ esac
+ $echo > $output "\
+# $outputname - a libtool library file
+# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# The name that we can dlopen(3).
+dlname='$tdlname'
+
+# Names of this library.
+library_names='$library_names'
+
+# The name of the static archive.
+old_library='$old_library'
+
+# Libraries that this one depends upon.
+dependency_libs='$dependency_libs'
+
+# Version information for $libname.
+current=$current
+age=$age
+revision=$revision
+
+# Is this an already installed library?
+installed=$installed
+
+# Should we warn about portability when linking against -modules?
+shouldnotlink=$module
+
+# Files to dlopen/dlpreopen
+dlopen='$dlfiles'
+dlpreopen='$dlprefiles'
+
+# Directory that this library needs to be installed in:
+libdir='$install_libdir'"
+ if test "$installed" = no && test "$need_relink" = yes; then
+ $echo >> $output "\
+relink_command=\"$relink_command\""
+ fi
+ done
+ fi
+
+ # Do a symbolic link so that the libtool archive can be found in
+ # LD_LIBRARY_PATH before the program is installed.
+ $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)"
+ $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $?
+ ;;
+ esac
+ exit $EXIT_SUCCESS
+ ;;
+
+ # libtool install mode
+ install)
+ modename="$modename: install"
+
+ # There may be an optional sh(1) argument at the beginning of
+ # install_prog (especially on Windows NT).
+ if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
+ # Allow the use of GNU shtool's install command.
+ $echo "X$nonopt" | grep shtool > /dev/null; then
+ # Aesthetically quote it.
+ arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
+ case $arg in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ arg="\"$arg\""
+ ;;
+ esac
+ install_prog="$arg "
+ arg="$1"
+ shift
+ else
+ install_prog=
+ arg=$nonopt
+ fi
+
+ # The real first argument should be the name of the installation program.
+ # Aesthetically quote it.
+ arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+ case $arg in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ arg="\"$arg\""
+ ;;
+ esac
+ install_prog="$install_prog$arg"
+
+ # We need to accept at least all the BSD install flags.
+ dest=
+ files=
+ opts=
+ prev=
+ install_type=
+ isdir=no
+ stripme=
+ for arg
+ do
+ if test -n "$dest"; then
+ files="$files $dest"
+ dest=$arg
+ continue
+ fi
+
+ case $arg in
+ -d) isdir=yes ;;
+ -f)
+ case " $install_prog " in
+ *[\\\ /]cp\ *) ;;
+ *) prev=$arg ;;
+ esac
+ ;;
+ -g | -m | -o) prev=$arg ;;
+ -s)
+ stripme=" -s"
+ continue
+ ;;
+ -*)
+ ;;
+ *)
+ # If the previous option needed an argument, then skip it.
+ if test -n "$prev"; then
+ prev=
+ else
+ dest=$arg
+ continue
+ fi
+ ;;
+ esac
+
+ # Aesthetically quote the argument.
+ arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+ case $arg in
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ arg="\"$arg\""
+ ;;
+ esac
+ install_prog="$install_prog $arg"
+ done
+
+ if test -z "$install_prog"; then
+ $echo "$modename: you must specify an install program" 1>&2
+ $echo "$help" 1>&2
+ exit $EXIT_FAILURE
+ fi
+
+ if test -n "$prev"; then
+ $echo "$modename: the \`$prev' option requires an argument" 1>&2
+ $echo "$help" 1>&2
+ exit $EXIT_FAILURE
+ fi
+
+ if test -z "$files"; then
+ if test -z "$dest"; then
+ $echo "$modename: no file or destination specified" 1>&2
+ else
+ $echo "$modename: you must specify a destination" 1>&2
+ fi
+ $echo "$help" 1>&2
+ exit $EXIT_FAILURE
+ fi
+
+ # Strip any trailing slash from the destination.
+ dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`
+
+ # Check to see that the destination is a directory.
+ test -d "$dest" && isdir=yes
+ if test "$isdir" = yes; then
+ destdir="$dest"
+ destname=
+ else
+ destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`
+ test "X$destdir" = "X$dest" && destdir=.
+ destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`
+
+ # Not a directory, so check to see that there is only one file specified.
+ set dummy $files
+ if test "$#" -gt 2; then
+ $echo "$modename: \`$dest' is not a directory" 1>&2
+ $echo "$help" 1>&2
+ exit $EXIT_FAILURE
+ fi
+ fi
+ case $destdir in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ for file in $files; do
+ case $file in
+ *.lo) ;;
+ *)
+ $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
+ $echo "$help" 1>&2
+ exit $EXIT_FAILURE
+ ;;
+ esac
+ done
+ ;;
+ esac
+
+ # This variable tells wrapper scripts just to set variables rather
+ # than running their programs.
+ libtool_install_magic="$magic"
+
+ staticlibs=
+ future_libdirs=
+ current_libdirs=
+ for file in $files; do
+
+ # Do each installation.
+ case $file in
+ *.$libext)
+ # Do the static libraries later.
+ staticlibs="$staticlibs $file"
+ ;;
+
+ *.la)
+ # Check to see that this really is a libtool archive.
+ if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+ else
+ $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
+ $echo "$help" 1>&2
+ exit $EXIT_FAILURE
+ fi
+
+ library_names=
+ old_library=
+ relink_command=
+ # If there is no directory component, then add one.
+ case $file in
+ */* | *\\*) . $file ;;
+ *) . ./$file ;;
+ esac
+
+ # Add the libdir to current_libdirs if it is the destination.
+ if test "X$destdir" = "X$libdir"; then
+ case "$current_libdirs " in
+ *" $libdir "*) ;;
+ *) current_libdirs="$current_libdirs $libdir" ;;
+ esac
+ else
+ # Note the libdir as a future libdir.
+ case "$future_libdirs " in
+ *" $libdir "*) ;;
+ *) future_libdirs="$future_libdirs $libdir" ;;
+ esac
+ fi
+
+ dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/
+ test "X$dir" = "X$file/" && dir=
+ dir="$dir$objdir"
+
+ if test -n "$relink_command"; then
+ # Determine the prefix the user has applied to our future dir.
+ inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"`
+
+ # Don't allow the user to place us outside of our expected
+ # location b/c this prevents finding dependent libraries that
+ # are installed to the same prefix.
+ # At present, this check doesn't affect windows .dll's that
+ # are installed into $libdir/../bin (currently, that works fine)
+ # but it's something to keep an eye on.
+ if test "$inst_prefix_dir" = "$destdir"; then
+ $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
+ exit $EXIT_FAILURE
+ fi
+
+ if test -n "$inst_prefix_dir"; then
+ # Stick the inst_prefix_dir data into the link command.
+ relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%" | $NL2SP`
+ else
+ relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%%" | $NL2SP`
+ fi
+
+ $echo "$modename: warning: relinking \`$file'" 1>&2
+ $show "$relink_command"
+ if $run eval "$relink_command"; then :
+ else
+ $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
+ exit $EXIT_FAILURE
+ fi
+ fi
+
+ # See the names of the shared library.
+ set dummy $library_names
+ if test -n "$2"; then
+ realname="$2"
+ shift
+ shift
+
+ srcname="$realname"
+ test -n "$relink_command" && srcname="$realname"T
+
+ # Install the shared library and build the symlinks.
+ $show "$install_prog $dir/$srcname $destdir/$realname"
+ $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $?
+ if test -n "$stripme" && test -n "$striplib"; then
+ $show "$striplib $destdir/$realname"
+ $run eval "$striplib $destdir/$realname" || exit $?
+ fi
+
+ if test "$#" -gt 0; then
+ # Delete the old symlinks, and create new ones.
+ # Try `ln -sf' first, because the `ln' binary might depend on
+ # the symlink we replace! Solaris /bin/ln does not understand -f,
+ # so we also need to try rm && ln -s.
+ for linkname
+ do
+ if test "$linkname" != "$realname"; then
+ $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
+ $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
+ fi
+ done
+ fi
+
+ # Do each command in the postinstall commands.
+ lib="$destdir/$realname"
+ cmds=$postinstall_cmds
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ eval cmd=\"$cmd\"
+ $show "$cmd"
+ $run eval "$cmd" || {
+ lt_exit=$?
+
+ # Restore the uninstalled library and exit
+ if test "$mode" = relink; then
+ $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
+ fi
+
+ exit $lt_exit
+ }
+ done
+ IFS="$save_ifs"
+ fi
+
+ # Install the pseudo-library for information purposes.
+ name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+ instname="$dir/$name"i
+ $show "$install_prog $instname $destdir/$name"
+ $run eval "$install_prog $instname $destdir/$name" || exit $?
+
+ # Maybe install the static library, too.
+ test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
+ ;;
+
+ *.lo)
+ # Install (i.e. copy) a libtool object.
+
+ # Figure out destination file name, if it wasn't already specified.
+ if test -n "$destname"; then
+ destfile="$destdir/$destname"
+ else
+ destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+ destfile="$destdir/$destfile"
+ fi
+
+ # Deduce the name of the destination old-style object file.
+ case $destfile in
+ *.lo)
+ staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
+ ;;
+ *.$objext)
+ staticdest="$destfile"
+ destfile=
+ ;;
+ *)
+ $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
+ $echo "$help" 1>&2
+ exit $EXIT_FAILURE
+ ;;
+ esac
+
+ # Install the libtool object if requested.
+ if test -n "$destfile"; then
+ $show "$install_prog $file $destfile"
+ $run eval "$install_prog $file $destfile" || exit $?
+ fi
+
+ # Install the old object if enabled.
+ if test "$build_old_libs" = yes; then
+ # Deduce the name of the old-style object file.
+ staticobj=`$echo "X$file" | $Xsed -e "$lo2o"`
+
+ $show "$install_prog $staticobj $staticdest"
+ $run eval "$install_prog \$staticobj \$staticdest" || exit $?
+ fi
+ exit $EXIT_SUCCESS
+ ;;
+
+ *)
+ # Figure out destination file name, if it wasn't already specified.
+ if test -n "$destname"; then
+ destfile="$destdir/$destname"
+ else
+ destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+ destfile="$destdir/$destfile"
+ fi
+
+ # If the file is missing, and there is a .exe on the end, strip it
+ # because it is most likely a libtool script we actually want to
+ # install
+ stripped_ext=""
+ case $file in
+ *.exe)
+ if test ! -f "$file"; then
+ file=`$echo $file|${SED} 's,.exe$,,'`
+ stripped_ext=".exe"
+ fi
+ ;;
+ esac
+
+ # Do a test to see if this is really a libtool program.
+ case $host in
+ *cygwin*|*mingw*)
+ wrapper=`$echo $file | ${SED} -e 's,.exe$,,'`
+ ;;
+ *)
+ wrapper=$file
+ ;;
+ esac
+ if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then
+ notinst_deplibs=
+ relink_command=
+
+ # Note that it is not necessary on cygwin/mingw to append a dot to
+ # foo even if both foo and FILE.exe exist: automatic-append-.exe
+ # behavior happens only for exec(3), not for open(2)! Also, sourcing
+ # `FILE.' does not work on cygwin managed mounts.
+ #
+ # If there is no directory component, then add one.
+ case $wrapper in
+ */* | *\\*) . ${wrapper} ;;
+ *) . ./${wrapper} ;;
+ esac
+
+ # Check the variables that should have been set.
+ if test -z "$notinst_deplibs"; then
+ $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2
+ exit $EXIT_FAILURE
+ fi
+
+ finalize=yes
+ for lib in $notinst_deplibs; do
+ # Check to see that each library is installed.
+ libdir=
+ if test -f "$lib"; then
+ # If there is no directory component, then add one.
+ case $lib in
+ */* | *\\*) . $lib ;;
+ *) . ./$lib ;;
+ esac
+ fi
+ libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
+ if test -n "$libdir" && test ! -f "$libfile"; then
+ $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
+ finalize=no
+ fi
+ done
+
+ relink_command=
+ # Note that it is not necessary on cygwin/mingw to append a dot to
+ # foo even if both foo and FILE.exe exist: automatic-append-.exe
+ # behavior happens only for exec(3), not for open(2)! Also, sourcing
+ # `FILE.' does not work on cygwin managed mounts.
+ #
+ # If there is no directory component, then add one.
+ case $wrapper in
+ */* | *\\*) . ${wrapper} ;;
+ *) . ./${wrapper} ;;
+ esac
+
+ outputname=
+ if test "$fast_install" = no && test -n "$relink_command"; then
+ if test "$finalize" = yes && test -z "$run"; then
+ tmpdir=`func_mktempdir`
+ file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'`
+ outputname="$tmpdir/$file"
+ # Replace the output file specification.
+ relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g' | $NL2SP`
+
+ $show "$relink_command"
+ if $run eval "$relink_command"; then :
+ else
+ $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
+ ${rm}r "$tmpdir"
+ continue
+ fi
+ file="$outputname"
+ else
+ $echo "$modename: warning: cannot relink \`$file'" 1>&2
+ fi
+ else
+ # Install the binary that we compiled earlier.
+ file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
+ fi
+ fi
+
+ # remove .exe since cygwin /usr/bin/install will append another
+ # one anyway
+ case $install_prog,$host in
+ */usr/bin/install*,*cygwin*)
+ case $file:$destfile in
+ *.exe:*.exe)
+ # this is ok
+ ;;
+ *.exe:*)
+ destfile=$destfile.exe
+ ;;
+ *:*.exe)
+ destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'`
+ ;;
+ esac
+ ;;
+ esac
+ $show "$install_prog$stripme $file $destfile"
+ $run eval "$install_prog\$stripme \$file \$destfile" || exit $?
+ test -n "$outputname" && ${rm}r "$tmpdir"
+ ;;
+ esac
+ done
+
+ for file in $staticlibs; do
+ name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+
+ # Set up the ranlib parameters.
+ oldlib="$destdir/$name"
+
+ $show "$install_prog $file $oldlib"
+ $run eval "$install_prog \$file \$oldlib" || exit $?
+
+ if test -n "$stripme" && test -n "$old_striplib"; then
+ $show "$old_striplib $oldlib"
+ $run eval "$old_striplib $oldlib" || exit $?
+ fi
+
+ # Do each command in the postinstall commands.
+ cmds=$old_postinstall_cmds
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ eval cmd=\"$cmd\"
+ $show "$cmd"
+ $run eval "$cmd" || exit $?
+ done
+ IFS="$save_ifs"
+ done
+
+ if test -n "$future_libdirs"; then
+ $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2
+ fi
+
+ if test -n "$current_libdirs"; then
+ # Maybe just do a dry run.
+ test -n "$run" && current_libdirs=" -n$current_libdirs"
+ exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
+ else
+ exit $EXIT_SUCCESS
+ fi
+ ;;
+
+ # libtool finish mode
+ finish)
+ modename="$modename: finish"
+ libdirs="$nonopt"
+ admincmds=
+
+ if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+ for dir
+ do
+ libdirs="$libdirs $dir"
+ done
+
+ for libdir in $libdirs; do
+ if test -n "$finish_cmds"; then
+ # Do each command in the finish commands.
+ cmds=$finish_cmds
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ eval cmd=\"$cmd\"
+ $show "$cmd"
+ $run eval "$cmd" || admincmds="$admincmds
+ $cmd"
+ done
+ IFS="$save_ifs"
+ fi
+ if test -n "$finish_eval"; then
+ # Do the single finish_eval.
+ eval cmds=\"$finish_eval\"
+ $run eval "$cmds" || admincmds="$admincmds
+ $cmds"
+ fi
+ done
+ fi
+
+ # Exit here if they wanted silent mode.
+ test "$show" = : && exit $EXIT_SUCCESS
+
+ $echo "X----------------------------------------------------------------------" | $Xsed
+ $echo "Libraries have been installed in:"
+ for libdir in $libdirs; do
+ $echo " $libdir"
+ done
+ $echo
+ $echo "If you ever happen to want to link against installed libraries"
+ $echo "in a given directory, LIBDIR, you must either use libtool, and"
+ $echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
+ $echo "flag during linking and do at least one of the following:"
+ if test -n "$shlibpath_var"; then
+ $echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
+ $echo " during execution"
+ fi
+ if test -n "$runpath_var"; then
+ $echo " - add LIBDIR to the \`$runpath_var' environment variable"
+ $echo " during linking"
+ fi
+ if test -n "$hardcode_libdir_flag_spec"; then
+ libdir=LIBDIR
+ eval flag=\"$hardcode_libdir_flag_spec\"
+
+ $echo " - use the \`$flag' linker flag"
+ fi
+ if test -n "$admincmds"; then
+ $echo " - have your system administrator run these commands:$admincmds"
+ fi
+ if test -f /etc/ld.so.conf; then
+ $echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+ fi
+ $echo
+ $echo "See any operating system documentation about shared libraries for"
+ $echo "more information, such as the ld(1) and ld.so(8) manual pages."
+ $echo "X----------------------------------------------------------------------" | $Xsed
+ exit $EXIT_SUCCESS
+ ;;
+
+ # libtool execute mode
+ execute)
+ modename="$modename: execute"
+
+ # The first argument is the command name.
+ cmd="$nonopt"
+ if test -z "$cmd"; then
+ $echo "$modename: you must specify a COMMAND" 1>&2
+ $echo "$help"
+ exit $EXIT_FAILURE
+ fi
+
+ # Handle -dlopen flags immediately.
+ for file in $execute_dlfiles; do
+ if test ! -f "$file"; then
+ $echo "$modename: \`$file' is not a file" 1>&2
+ $echo "$help" 1>&2
+ exit $EXIT_FAILURE
+ fi
+
+ dir=
+ case $file in
+ *.la)
+ # Check to see that this really is a libtool archive.
+ if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+ else
+ $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+ $echo "$help" 1>&2
+ exit $EXIT_FAILURE
+ fi
+
+ # Read the libtool library.
+ dlname=
+ library_names=
+
+ # If there is no directory component, then add one.
+ case $file in
+ */* | *\\*) . $file ;;
+ *) . ./$file ;;
+ esac
+
+ # Skip this library if it cannot be dlopened.
+ if test -z "$dlname"; then
+ # Warn if it was a shared library.
+ test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"
+ continue
+ fi
+
+ dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+ test "X$dir" = "X$file" && dir=.
+
+ if test -f "$dir/$objdir/$dlname"; then
+ dir="$dir/$objdir"
+ else
+ $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
+ exit $EXIT_FAILURE
+ fi
+ ;;
+
+ *.lo)
+ # Just add the directory containing the .lo file.
+ dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+ test "X$dir" = "X$file" && dir=.
+ ;;
+
+ *)
+ $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2
+ continue
+ ;;
+ esac
+
+ # Get the absolute pathname.
+ absdir=`cd "$dir" && pwd`
+ test -n "$absdir" && dir="$absdir"
+
+ # Now add the directory to shlibpath_var.
+ if eval "test -z \"\$$shlibpath_var\""; then
+ eval "$shlibpath_var=\"\$dir\""
+ else
+ eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
+ fi
+ done
+
+ # This variable tells wrapper scripts just to set shlibpath_var
+ # rather than running their programs.
+ libtool_execute_magic="$magic"
+
+ # Check if any of the arguments is a wrapper script.
+ args=
+ for file
+ do
+ case $file in
+ -*) ;;
+ *)
+ # Do a test to see if this is really a libtool program.
+ if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+ # If there is no directory component, then add one.
+ case $file in
+ */* | *\\*) . $file ;;
+ *) . ./$file ;;
+ esac
+
+ # Transform arg to wrapped name.
+ file="$progdir/$program"
+ fi
+ ;;
+ esac
+ # Quote arguments (to preserve shell metacharacters).
+ file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`
+ args="$args \"$file\""
+ done
+
+ if test -z "$run"; then
+ if test -n "$shlibpath_var"; then
+ # Export the shlibpath_var.
+ eval "export $shlibpath_var"
+ fi
+
+ # Restore saved environment variables
+ for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+ do
+ eval "if test \"\${save_$lt_var+set}\" = set; then
+ $lt_var=\$save_$lt_var; export $lt_var
+ else
+ $lt_unset $lt_var
+ fi"
+ done
+
+
+ # Now prepare to actually exec the command.
+ exec_cmd="\$cmd$args"
+ else
+ # Display what would be done.
+ if test -n "$shlibpath_var"; then
+ eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
+ $echo "export $shlibpath_var"
+ fi
+ $echo "$cmd$args"
+ exit $EXIT_SUCCESS
+ fi
+ ;;
+
+ # libtool clean and uninstall mode
+ clean | uninstall)
+ modename="$modename: $mode"
+ rm="$nonopt"
+ files=
+ rmforce=
+ exit_status=0
+
+ # This variable tells wrapper scripts just to set variables rather
+ # than running their programs.
+ libtool_install_magic="$magic"
+
+ for arg
+ do
+ case $arg in
+ -f) rm="$rm $arg"; rmforce=yes ;;
+ -*) rm="$rm $arg" ;;
+ *) files="$files $arg" ;;
+ esac
+ done
+
+ if test -z "$rm"; then
+ $echo "$modename: you must specify an RM program" 1>&2
+ $echo "$help" 1>&2
+ exit $EXIT_FAILURE
+ fi
+
+ rmdirs=
+
+ origobjdir="$objdir"
+ for file in $files; do
+ dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+ if test "X$dir" = "X$file"; then
+ dir=.
+ objdir="$origobjdir"
+ else
+ objdir="$dir/$origobjdir"
+ fi
+ name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+ test "$mode" = uninstall && objdir="$dir"
+
+ # Remember objdir for removal later, being careful to avoid duplicates
+ if test "$mode" = clean; then
+ case " $rmdirs " in
+ *" $objdir "*) ;;
+ *) rmdirs="$rmdirs $objdir" ;;
+ esac
+ fi
+
+ # Don't error if the file doesn't exist and rm -f was used.
+ if (test -L "$file") >/dev/null 2>&1 \
+ || (test -h "$file") >/dev/null 2>&1 \
+ || test -f "$file"; then
+ :
+ elif test -d "$file"; then
+ exit_status=1
+ continue
+ elif test "$rmforce" = yes; then
+ continue
+ fi
+
+ rmfiles="$file"
+
+ case $name in
+ *.la)
+ # Possibly a libtool archive, so verify it.
+ if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+ . $dir/$name
+
+ # Delete the libtool libraries and symlinks.
+ for n in $library_names; do
+ rmfiles="$rmfiles $objdir/$n"
+ done
+ test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
+
+ case "$mode" in
+ clean)
+ case " $library_names " in
+ # " " in the beginning catches empty $dlname
+ *" $dlname "*) ;;
+ *) rmfiles="$rmfiles $objdir/$dlname" ;;
+ esac
+ test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
+ ;;
+ uninstall)
+ if test -n "$library_names"; then
+ # Do each command in the postuninstall commands.
+ cmds=$postuninstall_cmds
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ eval cmd=\"$cmd\"
+ $show "$cmd"
+ $run eval "$cmd"
+ if test "$?" -ne 0 && test "$rmforce" != yes; then
+ exit_status=1
+ fi
+ done
+ IFS="$save_ifs"
+ fi
+
+ if test -n "$old_library"; then
+ # Do each command in the old_postuninstall commands.
+ cmds=$old_postuninstall_cmds
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ eval cmd=\"$cmd\"
+ $show "$cmd"
+ $run eval "$cmd"
+ if test "$?" -ne 0 && test "$rmforce" != yes; then
+ exit_status=1
+ fi
+ done
+ IFS="$save_ifs"
+ fi
+ # FIXME: should reinstall the best remaining shared library.
+ ;;
+ esac
+ fi
+ ;;
+
+ *.lo)
+ # Possibly a libtool object, so verify it.
+ if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+
+ # Read the .lo file
+ . $dir/$name
+
+ # Add PIC object to the list of files to remove.
+ if test -n "$pic_object" \
+ && test "$pic_object" != none; then
+ rmfiles="$rmfiles $dir/$pic_object"
+ fi
+
+ # Add non-PIC object to the list of files to remove.
+ if test -n "$non_pic_object" \
+ && test "$non_pic_object" != none; then
+ rmfiles="$rmfiles $dir/$non_pic_object"
+ fi
+ fi
+ ;;
+
+ *)
+ if test "$mode" = clean ; then
+ noexename=$name
+ case $file in
+ *.exe)
+ file=`$echo $file|${SED} 's,.exe$,,'`
+ noexename=`$echo $name|${SED} 's,.exe$,,'`
+ # $file with .exe has already been added to rmfiles,
+ # add $file without .exe
+ rmfiles="$rmfiles $file"
+ ;;
+ esac
+ # Do a test to see if this is a libtool program.
+ if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+ relink_command=
+ . $dir/$noexename
+
+ # note $name still contains .exe if it was in $file originally
+ # as does the version of $file that was added into $rmfiles
+ rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
+ if test "$fast_install" = yes && test -n "$relink_command"; then
+ rmfiles="$rmfiles $objdir/lt-$name"
+ fi
+ if test "X$noexename" != "X$name" ; then
+ rmfiles="$rmfiles $objdir/lt-${noexename}.c"
+ fi
+ fi
+ fi
+ ;;
+ esac
+ $show "$rm $rmfiles"
+ $run $rm $rmfiles || exit_status=1
+ done
+ objdir="$origobjdir"
+
+ # Try to remove the ${objdir}s in the directories where we deleted files
+ for dir in $rmdirs; do
+ if test -d "$dir"; then
+ $show "rmdir $dir"
+ $run rmdir $dir >/dev/null 2>&1
+ fi
+ done
+
+ exit $exit_status
+ ;;
+
+ "")
+ $echo "$modename: you must specify a MODE" 1>&2
+ $echo "$generic_help" 1>&2
+ exit $EXIT_FAILURE
+ ;;
+ esac
+
+ if test -z "$exec_cmd"; then
+ $echo "$modename: invalid operation mode \`$mode'" 1>&2
+ $echo "$generic_help" 1>&2
+ exit $EXIT_FAILURE
+ fi
+fi # test -z "$show_help"
+
+if test -n "$exec_cmd"; then
+ eval exec $exec_cmd
+ exit $EXIT_FAILURE
+fi
+
+# We need to display help for each of the modes.
+case $mode in
+"") $echo \
+"Usage: $modename [OPTION]... [MODE-ARG]...
+
+Provide generalized library-building support services.
+
+ --config show all configuration variables
+ --debug enable verbose shell tracing
+-n, --dry-run display commands without modifying any files
+ --features display basic configuration information and exit
+ --finish same as \`--mode=finish'
+ --help display this help message and exit
+ --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS]
+ --quiet same as \`--silent'
+ --silent don't print informational messages
+ --tag=TAG use configuration variables from tag TAG
+ --version print version information
+
+MODE must be one of the following:
+
+ clean remove files from the build directory
+ compile compile a source file into a libtool object
+ execute automatically set library path, then run a program
+ finish complete the installation of libtool libraries
+ install install libraries or executables
+ link create a library or an executable
+ uninstall remove libraries from an installed directory
+
+MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for
+a more detailed description of MODE.
+
+Report bugs to <bug-libtool@gnu.org>."
+ exit $EXIT_SUCCESS
+ ;;
+
+clean)
+ $echo \
+"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
+
+Remove files from the build directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, object or program, all the files associated
+with it are deleted. Otherwise, only FILE itself is deleted using RM."
+ ;;
+
+compile)
+ $echo \
+"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
+
+Compile a source file into a libtool library object.
+
+This mode accepts the following additional options:
+
+ -o OUTPUT-FILE set the output file name to OUTPUT-FILE
+ -prefer-pic try to building PIC objects only
+ -prefer-non-pic try to building non-PIC objects only
+ -static always build a \`.o' file suitable for static linking
+
+COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+from the given SOURCEFILE.
+
+The output file name is determined by removing the directory component from
+SOURCEFILE, then substituting the C source code suffix \`.c' with the
+library object suffix, \`.lo'."
+ ;;
+
+execute)
+ $echo \
+"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...
+
+Automatically set library path, then run a program.
+
+This mode accepts the following additional options:
+
+ -dlopen FILE add the directory containing FILE to the library path
+
+This mode sets the library path environment variable according to \`-dlopen'
+flags.
+
+If any of the ARGS are libtool executable wrappers, then they are translated
+into their corresponding uninstalled binary, and any of their required library
+directories are added to the library path.
+
+Then, COMMAND is executed, with ARGS as arguments."
+ ;;
+
+finish)
+ $echo \
+"Usage: $modename [OPTION]... --mode=finish [LIBDIR]...
+
+Complete the installation of libtool libraries.
+
+Each LIBDIR is a directory that contains libtool libraries.
+
+The commands that this mode executes may require superuser privileges. Use
+the \`--dry-run' option if you just want to see what would be executed."
+ ;;
+
+install)
+ $echo \
+"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...
+
+Install executables or libraries.
+
+INSTALL-COMMAND is the installation command. The first component should be
+either the \`install' or \`cp' program.
+
+The rest of the components are interpreted as arguments to that command (only
+BSD-compatible install options are recognized)."
+ ;;
+
+link)
+ $echo \
+"Usage: $modename [OPTION]... --mode=link LINK-COMMAND...
+
+Link object files or libraries together to form another library, or to
+create an executable program.
+
+LINK-COMMAND is a command using the C compiler that you would use to create
+a program from several object files.
+
+The following components of LINK-COMMAND are treated specially:
+
+ -all-static do not do any dynamic linking at all
+ -avoid-version do not add a version suffix if possible
+ -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
+ -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
+ -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+ -export-symbols SYMFILE
+ try to export only the symbols listed in SYMFILE
+ -export-symbols-regex REGEX
+ try to export only the symbols matching REGEX
+ -LLIBDIR search LIBDIR for required installed libraries
+ -lNAME OUTPUT-FILE requires the installed library libNAME
+ -module build a library that can dlopened
+ -no-fast-install disable the fast-install mode
+ -no-install link a not-installable executable
+ -no-undefined declare that a library does not refer to external symbols
+ -o OUTPUT-FILE create OUTPUT-FILE from the specified objects
+ -objectlist FILE Use a list of object files found in FILE to specify objects
+ -precious-files-regex REGEX
+ don't remove output files matching REGEX
+ -release RELEASE specify package release information
+ -rpath LIBDIR the created library will eventually be installed in LIBDIR
+ -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
+ -static do not do any dynamic linking of uninstalled libtool libraries
+ -static-libtool-libs
+ do not do any dynamic linking of libtool libraries
+ -version-info CURRENT[:REVISION[:AGE]]
+ specify library version info [each variable defaults to 0]
+
+All other options (arguments beginning with \`-') are ignored.
+
+Every other argument is treated as a filename. Files ending in \`.la' are
+treated as uninstalled libtool libraries, other files are standard or library
+object files.
+
+If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
+only library objects (\`.lo' files) may be specified, and \`-rpath' is
+required, except when creating a convenience library.
+
+If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
+using \`ar' and \`ranlib', or on Windows using \`lib'.
+
+If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
+is created, otherwise an executable program is created."
+ ;;
+
+uninstall)
+ $echo \
+"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
+
+Remove libraries from an installation directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, all the files associated with it are deleted.
+Otherwise, only FILE itself is deleted using RM."
+ ;;
+
+*)
+ $echo "$modename: invalid operation mode \`$mode'" 1>&2
+ $echo "$help" 1>&2
+ exit $EXIT_FAILURE
+ ;;
+esac
+
+$echo
+$echo "Try \`$modename --help' for more information about other modes."
+
+exit $?
+
+# The TAGs below are defined such that we never get into a situation
+# in which we disable both kinds of libraries. Given conflicting
+# choices, we go for a static library, that is the most portable,
+# since we can't tell whether shared libraries were disabled because
+# the user asked for that or because the platform doesn't support
+# them. This is particularly important on AIX, because we don't
+# support having both static and shared libraries enabled at the same
+# time on that platform, so we default to a shared-only configuration.
+# If a disable-shared tag is given, we'll fallback to a static-only
+# configuration. But we'll never go from static-only to shared-only.
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
+disable_libs=shared
+# ### END LIBTOOL TAG CONFIG: disable-shared
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-static
+disable_libs=static
+# ### END LIBTOOL TAG CONFIG: disable-static
+
+# Local Variables:
+# mode:shell-script
+# sh-indentation:2
+# End:
--- /dev/null
+#! /bin/sh
+# Common stub for a few missing GNU programs while installing.
+
+scriptversion=2005-06-08.21
+
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+ echo 1>&2 "Try \`$0 --help' for more information"
+ exit 1
+fi
+
+run=:
+
+# In the cases where this matters, `missing' is being run in the
+# srcdir already.
+if test -f configure.ac; then
+ configure_ac=configure.ac
+else
+ configure_ac=configure.in
+fi
+
+msg="missing on your system"
+
+case "$1" in
+--run)
+ # Try to run requested program, and just exit if it succeeds.
+ run=
+ shift
+ "$@" && exit 0
+ # Exit code 63 means version mismatch. This often happens
+ # when the user try to use an ancient version of a tool on
+ # a file that requires a minimum version. In this case we
+ # we should proceed has if the program had been absent, or
+ # if --run hadn't been passed.
+ if test $? = 63; then
+ run=:
+ msg="probably too old"
+ fi
+ ;;
+
+ -h|--h|--he|--hel|--help)
+ echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
+
+Options:
+ -h, --help display this help and exit
+ -v, --version output version information and exit
+ --run try to run the given command, and emulate it if it fails
+
+Supported PROGRAM values:
+ aclocal touch file \`aclocal.m4'
+ autoconf touch file \`configure'
+ autoheader touch file \`config.h.in'
+ automake touch all \`Makefile.in' files
+ bison create \`y.tab.[ch]', if possible, from existing .[ch]
+ flex create \`lex.yy.c', if possible, from existing .c
+ help2man touch the output file
+ lex create \`lex.yy.c', if possible, from existing .c
+ makeinfo touch the output file
+ tar try tar, gnutar, gtar, then tar without non-portable flags
+ yacc create \`y.tab.[ch]', if possible, from existing .[ch]
+
+Send bug reports to <bug-automake@gnu.org>."
+ exit $?
+ ;;
+
+ -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+ echo "missing $scriptversion (GNU Automake)"
+ exit $?
+ ;;
+
+ -*)
+ echo 1>&2 "$0: Unknown \`$1' option"
+ echo 1>&2 "Try \`$0 --help' for more information"
+ exit 1
+ ;;
+
+esac
+
+# Now exit if we have it, but it failed. Also exit now if we
+# don't have it and --version was passed (most likely to detect
+# the program).
+case "$1" in
+ lex|yacc)
+ # Not GNU programs, they don't have --version.
+ ;;
+
+ tar)
+ if test -n "$run"; then
+ echo 1>&2 "ERROR: \`tar' requires --run"
+ exit 1
+ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+ exit 1
+ fi
+ ;;
+
+ *)
+ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+ # We have it, but it failed.
+ exit 1
+ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+ # Could not run --version or --help. This is probably someone
+ # running `$TOOL --version' or `$TOOL --help' to check whether
+ # $TOOL exists and not knowing $TOOL uses missing.
+ exit 1
+ fi
+ ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case "$1" in
+ aclocal*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`acinclude.m4' or \`${configure_ac}'. You might want
+ to install the \`Automake' and \`Perl' packages. Grab them from
+ any GNU archive site."
+ touch aclocal.m4
+ ;;
+
+ autoconf)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`${configure_ac}'. You might want to install the
+ \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
+ archive site."
+ touch configure
+ ;;
+
+ autoheader)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`acconfig.h' or \`${configure_ac}'. You might want
+ to install the \`Autoconf' and \`GNU m4' packages. Grab them
+ from any GNU archive site."
+ files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
+ test -z "$files" && files="config.h"
+ touch_files=
+ for f in $files; do
+ case "$f" in
+ *:*) touch_files="$touch_files "`echo "$f" |
+ sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+ *) touch_files="$touch_files $f.in";;
+ esac
+ done
+ touch $touch_files
+ ;;
+
+ automake*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
+ You might want to install the \`Automake' and \`Perl' packages.
+ Grab them from any GNU archive site."
+ find . -type f -name Makefile.am -print |
+ sed 's/\.am$/.in/' |
+ while read f; do touch "$f"; done
+ ;;
+
+ autom4te)
+ echo 1>&2 "\
+WARNING: \`$1' is needed, but is $msg.
+ You might have modified some files without having the
+ proper tools for further handling them.
+ You can get \`$1' as part of \`Autoconf' from any GNU
+ archive site."
+
+ file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
+ test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
+ if test -f "$file"; then
+ touch $file
+ else
+ test -z "$file" || exec >$file
+ echo "#! /bin/sh"
+ echo "# Created by GNU Automake missing as a replacement of"
+ echo "# $ $@"
+ echo "exit 0"
+ chmod +x $file
+ exit 1
+ fi
+ ;;
+
+ bison|yacc)
+ echo 1>&2 "\
+WARNING: \`$1' $msg. You should only need it if
+ you modified a \`.y' file. You may need the \`Bison' package
+ in order for those modifications to take effect. You can get
+ \`Bison' from any GNU archive site."
+ rm -f y.tab.c y.tab.h
+ if [ $# -ne 1 ]; then
+ eval LASTARG="\${$#}"
+ case "$LASTARG" in
+ *.y)
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+ if [ -f "$SRCFILE" ]; then
+ cp "$SRCFILE" y.tab.c
+ fi
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+ if [ -f "$SRCFILE" ]; then
+ cp "$SRCFILE" y.tab.h
+ fi
+ ;;
+ esac
+ fi
+ if [ ! -f y.tab.h ]; then
+ echo >y.tab.h
+ fi
+ if [ ! -f y.tab.c ]; then
+ echo 'main() { return 0; }' >y.tab.c
+ fi
+ ;;
+
+ lex|flex)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a \`.l' file. You may need the \`Flex' package
+ in order for those modifications to take effect. You can get
+ \`Flex' from any GNU archive site."
+ rm -f lex.yy.c
+ if [ $# -ne 1 ]; then
+ eval LASTARG="\${$#}"
+ case "$LASTARG" in
+ *.l)
+ SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+ if [ -f "$SRCFILE" ]; then
+ cp "$SRCFILE" lex.yy.c
+ fi
+ ;;
+ esac
+ fi
+ if [ ! -f lex.yy.c ]; then
+ echo 'main() { return 0; }' >lex.yy.c
+ fi
+ ;;
+
+ help2man)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a dependency of a manual page. You may need the
+ \`Help2man' package in order for those modifications to take
+ effect. You can get \`Help2man' from any GNU archive site."
+
+ file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+ if test -z "$file"; then
+ file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
+ fi
+ if [ -f "$file" ]; then
+ touch $file
+ else
+ test -z "$file" || exec >$file
+ echo ".ab help2man is required to generate this page"
+ exit 1
+ fi
+ ;;
+
+ makeinfo)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a \`.texi' or \`.texinfo' file, or any other file
+ indirectly affecting the aspect of the manual. The spurious
+ call might also be the consequence of using a buggy \`make' (AIX,
+ DU, IRIX). You might want to install the \`Texinfo' package or
+ the \`GNU make' package. Grab either from any GNU archive site."
+ # The file to touch is that specified with -o ...
+ file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+ if test -z "$file"; then
+ # ... or it is the one specified with @setfilename ...
+ infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+ file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile`
+ # ... or it is derived from the source name (dir/f.texi becomes f.info)
+ test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
+ fi
+ # If the file does not exist, the user really needs makeinfo;
+ # let's fail without touching anything.
+ test -f $file || exit 1
+ touch $file
+ ;;
+
+ tar)
+ shift
+
+ # We have already tried tar in the generic part.
+ # Look for gnutar/gtar before invocation to avoid ugly error
+ # messages.
+ if (gnutar --version > /dev/null 2>&1); then
+ gnutar "$@" && exit 0
+ fi
+ if (gtar --version > /dev/null 2>&1); then
+ gtar "$@" && exit 0
+ fi
+ firstarg="$1"
+ if shift; then
+ case "$firstarg" in
+ *o*)
+ firstarg=`echo "$firstarg" | sed s/o//`
+ tar "$firstarg" "$@" && exit 0
+ ;;
+ esac
+ case "$firstarg" in
+ *h*)
+ firstarg=`echo "$firstarg" | sed s/h//`
+ tar "$firstarg" "$@" && exit 0
+ ;;
+ esac
+ fi
+
+ echo 1>&2 "\
+WARNING: I can't seem to be able to run \`tar' with the given arguments.
+ You may want to install GNU tar or Free paxutils, or check the
+ command line arguments."
+ exit 1
+ ;;
+
+ *)
+ echo 1>&2 "\
+WARNING: \`$1' is needed, and is $msg.
+ You might have modified some files without having the
+ proper tools for further handling them. Check the \`README' file,
+ it often tells you about the needed prerequisites for installing
+ this package. You may also peek at any GNU archive site, in case
+ some other package would contain this missing \`$1' program."
+ exit 1
+ ;;
+esac
+
+exit 0
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
subdir = parameter
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
LIBRARIES = $(noinst_LIBRARIES)
+AR = ar
ARFLAGS = cru
libl7vsadm_parameter_a_AR = $(AR) $(ARFLAGS)
libl7vsadm_parameter_a_LIBADD =
am__depfiles_maybe = depfiles
CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
-LTCXXCOMPILE = $(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) \
- $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
- $(AM_CXXFLAGS) $(CXXFLAGS)
CXXLD = $(CXX)
-CXXLINK = $(LIBTOOL) --tag=CXX --mode=link $(CXXLD) $(AM_CXXFLAGS) \
- $(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+CXXLINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) \
+ -o $@
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \
- $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
- $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
-LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
- $(AM_LDFLAGS) $(LDFLAGS) -o $@
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
SOURCES = $(libl7vsadm_parameter_a_SOURCES) \
$(libl7vsd_parameter_a_SOURCES) \
$(libsnmpagent_parameter_a_SOURCES)
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
-AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CXX = @CXX@
-CXXCPP = @CXXCPP@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
-ECHO = @ECHO@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
-GLIB_CFLAGS = @GLIB_CFLAGS@
-GLIB_GENMARSHAL = @GLIB_GENMARSHAL@
-GLIB_LIBS = @GLIB_LIBS@
-GLIB_MKENUMS = @GLIB_MKENUMS@
-GOBJECT_QUERY = @GOBJECT_QUERY@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
RANLIB = @RANLIB@
-SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
VERSION = @VERSION@
-ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
ac_ct_RANLIB = @ac_ct_RANLIB@
ac_ct_STRIP = @ac_ct_STRIP@
am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
-build = @build@
build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
datadir = @datadir@
exec_prefix = @exec_prefix@
-host = @host@
host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
-l7vs_maxvs = @l7vs_maxvs@
-l7vs_moddir = @l7vs_moddir@
-l7vsadm_sockdir = @l7vsadm_sockdir@
libdir = @libdir@
libexecdir = @libexecdir@
localstatedir = @localstatedir@
program_transform_name = @program_transform_name@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
-snmpagent_libs = @snmpagent_libs@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
noinst_LIBRARIES = libl7vsd_parameter.a libl7vsadm_parameter.a libsnmpagent_parameter.a
all: all-am
.SUFFIXES:
-.SUFFIXES: .cpp .lo .o .obj
+.SUFFIXES: .cpp .o .obj
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
-.cpp.lo:
-@am__fastdepCXX_TRUE@ if $(LTCXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
-@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@ $(LTCXXCOMPILE) -c -o $@ $<
-
libl7vsadm_parameter_a-parameter.o: parameter.cpp
@am__fastdepCXX_TRUE@ if $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libl7vsadm_parameter_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT libl7vsadm_parameter_a-parameter.o -MD -MP -MF "$(DEPDIR)/libl7vsadm_parameter_a-parameter.Tpo" -c -o libl7vsadm_parameter_a-parameter.o `test -f 'parameter.cpp' || echo '$(srcdir)/'`parameter.cpp; \
@am__fastdepCXX_TRUE@ then mv -f "$(DEPDIR)/libl7vsadm_parameter_a-parameter.Tpo" "$(DEPDIR)/libl7vsadm_parameter_a-parameter.Po"; else rm -f "$(DEPDIR)/libl7vsadm_parameter_a-parameter.Tpo"; exit 1; fi
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='parameter_impl.cpp' object='libsnmpagent_parameter_a-parameter_impl.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCXX_FALSE@ $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libsnmpagent_parameter_a_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o libsnmpagent_parameter_a-parameter_impl.obj `if test -f 'parameter_impl.cpp'; then $(CYGPATH_W) 'parameter_impl.cpp'; else $(CYGPATH_W) '$(srcdir)/parameter_impl.cpp'; fi`
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-
-distclean-libtool:
- -rm -f libtool
uninstall-info-am:
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
@echo "it deletes files that may require special tools to rebuild."
clean: clean-am
-clean-am: clean-generic clean-libtool clean-noinstLIBRARIES \
- mostlyclean-am
+clean-am: clean-generic clean-noinstLIBRARIES mostlyclean-am
distclean: distclean-am
-rm -rf ./$(DEPDIR)
-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
- distclean-libtool distclean-tags
+ distclean-tags
dvi: dvi-am
mostlyclean: mostlyclean-am
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
- mostlyclean-libtool
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
pdf: pdf-am
uninstall-am: uninstall-info-am
.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
- clean-libtool clean-noinstLIBRARIES ctags distclean \
- distclean-compile distclean-generic distclean-libtool \
- distclean-tags distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-exec \
- install-exec-am install-info install-info-am install-man \
- install-strip installcheck installcheck-am installdirs \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
- pdf pdf-am ps ps-am tags uninstall uninstall-am \
- uninstall-info-am
+ clean-noinstLIBRARIES ctags distclean distclean-compile \
+ distclean-generic distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-compile \
+ mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \
+ uninstall-am uninstall-info-am
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
#ifndef PARAMETER_H
#define PARAMETER_H
+#include <string>
#include "parameter_enum.h"
namespace l7vs{
std::string getStringValue(const PARAMETER_COMPONENT_TAG,
const std::string&);
};
-}
+};
-#endif //PARAMETER_H
\ No newline at end of file
+#endif //PARAMETER_H
#ifndef PARAMETER_ENUM_H
#define PARAMETER_ENUM_H
-namespace l7vsd{
+namespace l7vs{
enum PARAMETER_COMPONENT_TAG
{
PARAM_COMP_SNMPAGENT
};
-}; //namespace l7vsd
+} //namespace l7vsd
#endif //PARAMETER_ENUM
OSDN Git Service
