* config/svr3.h (ASM_FILE_START): Don't use ASM_FILE_START_1.

	(ASM_FILE_START_1): Delete.
	* config/i386/att.h, config/i386/sco5.h,
	config/i386/sysv3.h
	(ASM_FILE_START_1): Delete.

git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@67924 138bc75d-0d04-0410-961f-82ee72b054a4

diff --git a/gcc/ChangeLog b/gcc/ChangeLog
index b117b9d..c1db08a 100644 (file)
--- a/gcc/ChangeLog
+++ b/gcc/ChangeLog
@@ -1,8 +1,16 @@
+2003-06-13  Zack Weinberg  <zack@codesourcery.com>
+
+       * config/svr3.h (ASM_FILE_START): Don't use ASM_FILE_START_1.
+       (ASM_FILE_START_1): Delete.
+       * config/i386/att.h, config/i386/sco5.h,
+       config/i386/sysv3.h
+       (ASM_FILE_START_1): Delete.
+
 2003-06-13  Kelley Cook  <kelleycook@wideopenwest.com>
 
        * config/i386/bsd.h: Remove ASM_FILE_START.
        * config/i386/djgpp.h: Likewise.
-       * config/i386/gas.h (ASM_FILE_START): Output .file before .intel_syntax. 
+       * config/i386/gas.h (ASM_FILE_START): Output .file before .intel_syntax.
 
        * config/i386/djgpp.h: Move included unix.h, bsd.h, gas.h to ...
        * config.gcc (i[34567]86-pc-msdosdjgpp): ... here.
@@ -11,8 +19,8 @@
 
        PR bootstrap/10835
        * haifa-sched.c (max_lookahead_tries,
-        cached_first_cycle_multipass_dfa_lookahead,
-        cached_issue_rate): New variables.
+       cached_first_cycle_multipass_dfa_lookahead,
+       cached_issue_rate): New variables.
        (max_issue): Check the number of tries.
        (choose_ready): Calculate max_lookahead_tries.
        (sched_init): Check cached_issue_rate.
@@ -23,7 +31,7 @@
        * cfgrtl.c (purge_dead_edges): Expect it too.
 
 2003-06-13  Jim Wilson  <wilson@tuliptree.org>
-            Eric Botcazou  <ebotcazou@libertysurf.fr>
+           Eric Botcazou  <ebotcazou@libertysurf.fr>
 
        PR bootstrap/10983
        * combine.c (make_extraction): Use gen_lowpart_for_combine
@@ -36,11 +44,11 @@
 
 2003-06-13  Aldy Hernandez  <aldyh@redhat.com>
 
-        * c-common.c (handle_mode_attribute): Use VECTOR_MODE_P macro.
+       * c-common.c (handle_mode_attribute): Use VECTOR_MODE_P macro.
 
-        * simplify-rtx.c (simplify_subreg): Same.
+       * simplify-rtx.c (simplify_subreg): Same.
 
-        * emit-rtl.c (gen_lowpart_common): Same.
+       * emit-rtl.c (gen_lowpart_common): Same.
 
 2003-06-13  Kazu Hirata  <kazu@cs.umass.edu>
 
@@ -78,7 +86,7 @@
 
 2003-06-13  Ulrich Weigand  <uweigand@de.ibm.com>
 
-       * config/s390/s390.c (s390_va_arg): Fix alignment when retrieving 
+       * config/s390/s390.c (s390_va_arg): Fix alignment when retrieving
        non-integral types from integer register save area slots.
 
 2003-06-13  Nathanael Nerode  <neroden@gcc.gnu.org>
@@ -117,7 +125,7 @@
        * config/m32r/m32r.md: Fix a comment typo.
 
 2003-06-13  Eric Botcazou  <ebotcazou@libertysurf.fr>
-            Christian Ehrhardt <ehrhardt@mathematik.uni-ulm.de>
+           Christian Ehrhardt <ehrhardt@mathematik.uni-ulm.de>
 
        PR target/10142
        * config/sparc/sparc.c (function_arg_record_value_parms): Add
@@ -137,7 +145,7 @@
 
 2003-06-12  Aldy Hernandez  <aldyh@redhat.com>
 
-        * config/rs6000/rs6000.c (function_arg): Remove typo.
+       * config/rs6000/rs6000.c (function_arg): Remove typo.
 
 2003-06-12  Richard Henderson  <rth@redhat.com>
 
@@ -146,15 +154,15 @@
 
 2003-06-12  Richard Henderson  <rth@redhat.com>
 
-        PR middle-end/10475
-        * expmed.c (emit_store_flag): Use simplify_gen_subreg directly
-        for extracting sub-words.
+       PR middle-end/10475
+       * expmed.c (emit_store_flag): Use simplify_gen_subreg directly
+       for extracting sub-words.
 
 2003-06-12  Richard Henderson  <rth@redhat.com>
 
-        PR target/7594
-        * config/m68k/m68k.md (zero_extendhisi2): Use gen_lowpart_SUBREG.
-        (zero_extendqihi2, zero_extendqisi2): Likewise.
+       PR target/7594
+       * config/m68k/m68k.md (zero_extendhisi2): Use gen_lowpart_SUBREG.
+       (zero_extendqihi2, zero_extendqisi2): Likewise.
 
 2003-06-12  Aldy Hernandez  <aldyh@redhat.com>
 
@@ -169,7 +177,7 @@
 
 2003-06-12  Aldy Hernandez  <aldyh@redhat.com>
 
-        * config/rs6000/rs6000.h (MODES_TIEABLE_P): Add SPE vectors.
+       * config/rs6000/rs6000.h (MODES_TIEABLE_P): Add SPE vectors.
 
 2003-06-12  Roger Sayle  <roger@eyesopen.com>
 
@@ -219,14 +227,14 @@ Thu Jun 12 20:00:55 CEST 2003  Jan Hubicka  <jh@suse.cz>
 
 2003-06-10  Richard Henderson  <rth@redhat.com>
 
-        PR inline-asm/4823
-        * reg-stack.c (any_malformed_asm): New.
-        (check_asm_stack_operands): Set it.
-        (convert_regs_1): Check it before aborting.
+       PR inline-asm/4823
+       * reg-stack.c (any_malformed_asm): New.
+       (check_asm_stack_operands): Set it.
+       (convert_regs_1): Check it before aborting.
 
 2003-06-12  Aldy Hernandez  <aldyh@redhat.com>
 
-        * config/rs6000/spe.md: Change all clobbers of the accumulator to sets.
+       * config/rs6000/spe.md: Change all clobbers of the accumulator to sets.
 
 2003-06-12  Jakub Jelinek  <jakub@redhat.com>
 
@@ -459,10 +467,10 @@ Thu Jun 12 20:00:55 CEST 2003  Jan Hubicka  <jh@suse.cz>
 
        * config.gcc: Add arm-wince-pe target.
        * config/arm/pe.h (MULTILIB_DEFAULTS): Define.
-        Add comment about default apcs26 support.
+       Add comment about default apcs26 support.
        * config/arm/t-pe (MULTILIB_OPTIONS): Add an -mapcs-32
        multilib.
-        (MULTILIB_DIRNAMES): Add 'apcs32'.
+       (MULTILIB_DIRNAMES): Add 'apcs32'.
        * config/arm/t-wince-pe: New makefile fragment.
        * config/arm/wince-pe.h: New file.  Overrides a few definitions
        in arm/pe.h
@@ -524,7 +532,7 @@ Thu Jun 12 20:00:55 CEST 2003  Jan Hubicka  <jh@suse.cz>
 
 2003-06-09  Richard Henderson  <rth@redhat.com>
 
-        * stmt.c (expand_asm_operands): Re-word warning.
+       * stmt.c (expand_asm_operands): Re-word warning.
 
 2003-06-08  Andrew Pinski  <pinskia@physics.uc.edu>
 

diff --git a/gcc/config/i386/att.h b/gcc/config/i386/att.h
index 4e26d81..c95b6ad 100644 (file)
--- a/gcc/config/i386/att.h
+++ b/gcc/config/i386/att.h
@@ -54,10 +54,6 @@ do                                                           \
          fputs ("\t.intel_syntax\n", FILE);                            \
   } while (0)
 
-/* Do use .optim by default on this machine.  */
-#undef ASM_FILE_START_1
-#define ASM_FILE_START_1(FILE) fprintf (FILE, "\t.optim\n")
-
 /* This is how to output an assembler line
    that says to advance the location counter
    to a multiple of 2**LOG bytes.  */

diff --git a/gcc/config/i386/sco5.h b/gcc/config/i386/sco5.h
index 89dae55..b4096a7 100644 (file)
--- a/gcc/config/i386/sco5.h
+++ b/gcc/config/i386/sco5.h
@@ -44,9 +44,6 @@ Boston, MA 02111-1307, USA.  */
 #define CTORS_SECTION_ASM_OP           "\t.section\t.ctors, \"aw\""
 #define DTORS_SECTION_ASM_OP           "\t.section\t.dtors, \"aw\""
 
-#undef ASM_FILE_START_1
-#define ASM_FILE_START_1(FILE)
-
 #undef ASM_FILE_START
 #define ASM_FILE_START(FILE)                                           \
 do {                                                                   \

diff --git a/gcc/config/i386/sysv3.h b/gcc/config/i386/sysv3.h
index 406b0bf..8809181 100644 (file)
--- a/gcc/config/i386/sysv3.h
+++ b/gcc/config/i386/sysv3.h
@@ -46,11 +46,6 @@ Boston, MA 02111-1307, USA.  */
 
 #define PCC_BITFIELD_TYPE_MATTERS 1
 
-/* Don't write a `.optim' pseudo; this assembler doesn't handle them.  */
-
-#undef ASM_FILE_START_1
-#define ASM_FILE_START_1(FILE)
-
 /* We want to be able to get DBX debugging information via -gstabs.  */
 
 #define DBX_DEBUGGING_INFO 1

diff --git a/gcc/config/svr3.h b/gcc/config/svr3.h
index a398069..434118d 100644 (file)
--- a/gcc/config/svr3.h
+++ b/gcc/config/svr3.h
@@ -47,13 +47,8 @@ Boston, MA 02111-1307, USA.
 #undef ASM_FILE_START
 #define ASM_FILE_START(FILE)                                   \
   do { output_file_directive ((FILE), main_input_filename);    \
-       if (optimize) { ASM_FILE_START_1 (FILE); }              \
      } while (0)
 
-/* By default, do nothing: a few machines support .optim, but not most.  */
-#undef ASM_FILE_START_1
-#define ASM_FILE_START_1(FILE)
-
 /* This says how to output an assembler line
    to define a global common symbol.  */
 /* We don't use ROUNDED because the standard compiler doesn't,