# GCC target-specific configuration file.
# Copyright 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007,
-# 2008, 2009, 2010 Free Software Foundation, Inc.
+# 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
#This file is part of GCC.
# tm_file A list of target macro files, if different from
# "$cpu_type/$cpu_type.h". Usually it's constructed
# per target in a way like this:
-# tm_file="${tm_file} dbxelf.h elfos.h svr4.h ${cpu_type.h}/elf.h"
+# tm_file="${tm_file} dbxelf.h elfos.h ${cpu_type.h}/elf.h"
# Note that the preferred order is:
# - specific target header "${cpu_type}/${cpu_type.h}"
# - generic headers like dbxelf.h elfos.h, etc.
# build-directory files by prefixing them with "./".
# All other files should relative to $srcdir/config.
#
+# libgcc_tm_file A list of target macro files used only for code
+# built for the target, not the host. These files
+# are relative to $srcdir/../libgcc/config and
+# must not have the same names as files in
+# $srcdir/config.
+#
# tm_p_file Location of file with declarations for functions
# in $out_file.
#
# out_file The name of the machine description C support
# file, if different from "$cpu_type/$cpu_type.c".
#
+# common_out_file The name of the source file for code shared between
+# the compiler proper and the driver.
+#
# md_file The name of the machine-description file, if
# different from "$cpu_type/$cpu_type.md".
#
#
# gnu_ld Set to yes or no depending on whether the target
# system normally uses GNU ld.
+#
+# target_has_targetcm Set to yes or no depending on whether the target
+# has its own definition of targetcm.
+#
+# target_has_targetm_common Set to yes or no depending on whether the
+# target has its own definition of targetm_common.
out_file=
+common_out_file=
tmake_file=
extra_headers=
user_headers_inc_next_pre=
c_target_objs=
cxx_target_objs=
fortran_target_objs=
+target_has_targetcm=no
+target_has_targetm_common=yes
tm_defines=
xm_defines=
+libgcc_tm_file=
# Set this to force installation and use of collect2.
use_collect2=
# Set this to override the default target model.
md_file=
# Obsolete configurations.
-#case ${target} in
-# )
-# if test "x$enable_obsolete" != xyes; then
-# echo "*** Configuration ${target} is obsolete." >&2
-# echo "*** Specify --enable-obsolete to build it anyway." >&2
-# echo "*** Support will be REMOVED in the next major release of GCC," >&2
-# echo "*** unless a maintainer comes forward." >&2
-# exit 1
-# fi;;
-#esac
+case ${target} in
+ alpha*-dec-osf5.1* \
+ | i[34567]86-*-interix3* \
+ | mips-sgi-irix6.5 \
+ | mips*-*-openbsd* \
+ | score-* \
+ | *-*-solaris2.8* \
+ )
+ if test "x$enable_obsolete" != xyes; then
+ echo "*** Configuration ${target} is obsolete." >&2
+ echo "*** Specify --enable-obsolete to build it anyway." >&2
+ echo "*** Support will be REMOVED in the next major release of GCC," >&2
+ echo "*** unless a maintainer comes forward." >&2
+ exit 1
+ fi;;
+esac
# Unsupported targets list. Do not put an entry in this list unless
# it would otherwise be caught by a more permissive pattern. The list
case ${target} in
i[34567]86-go32-* \
| i[34567]86-*-go32* \
+ | m68k-*-uclinuxoldabi* \
| mips64orion*-*-rtems* \
| pdp11-*-bsd \
| sparc-hal-solaris2* \
| thumb-*-* \
+ | *-*-freebsd[12] | *-*-freebsd[12].* \
+ | *-*-freebsd*aout* \
| *-*-linux*aout* \
| *-*-linux*coff* \
| *-*-linux*libc1* \
m32c*-*-*)
cpu_type=m32c
tmake_file=m32c/t-m32c
+ target_has_targetm_common=no
;;
alpha*-*-*)
cpu_type=alpha
extra_headers="mmintrin.h arm_neon.h"
c_target_objs="arm-c.o"
cxx_target_objs="arm-c.o"
+ extra_options="${extra_options} arm/arm-tables.opt"
;;
avr-*-*)
cpu_type=avr
c_target_objs="avr-c.o"
cxx_target_objs="avr-c.o"
+ extra_options="${extra_options} avr/avr-tables.opt"
;;
bfin*-*)
cpu_type=bfin
extra_options="${extra_options} g.opt"
;;
moxie*) cpu_type=moxie
+ target_has_targetm_common=no
;;
fido-*-*)
cpu_type=m68k
extra_headers=math-68881.h
+ extra_options="${extra_options} m68k/m68k-tables.opt"
;;
i[34567]86-*-*)
cpu_type=i386
;;
m68k-*-*)
extra_headers=math-68881.h
+ extra_options="${extra_options} m68k/m68k-tables.opt"
;;
microblaze*-*-*)
cpu_type=microblaze
cpu_type=mips
need_64bit_hwint=yes
extra_headers="loongson.h"
- extra_options="${extra_options} g.opt"
+ extra_options="${extra_options} g.opt mips/mips-tables.opt"
;;
picochip-*-*)
cpu_type=picochip
cpu_is_64bit=yes
;;
esac
- extra_options="${extra_options} g.opt fused-madd.opt"
+ extra_options="${extra_options} g.opt fused-madd.opt rs6000/rs6000-tables.opt"
;;
rs6000*-*-*)
need_64bit_hwint=yes
- extra_options="${extra_options} g.opt fused-madd.opt"
+ extra_options="${extra_options} g.opt fused-madd.opt rs6000/rs6000-tables.opt"
;;
score*-*-*)
cpu_type=score
cpu_type=sh
need_64bit_hwint=yes
;;
+v850*-*-*)
+ cpu_type=v850
+ ;;
xtensa*-*-*)
extra_options="${extra_options} fused-madd.opt"
;;
c_target_objs="${c_target_objs} darwin-c.o"
cxx_target_objs="${cxx_target_objs} darwin-c.o"
fortran_target_objs="darwin-f.o"
+ target_has_targetcm=yes
extra_objs="darwin.o"
extra_gcc_objs="darwin-driver.o"
default_use_cxa_atexit=yes
"" | yes | posix) thread_file='posix' ;;
esac
;;
-*-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*)
- # This is the place-holder for the generic a.out configuration
- # of FreeBSD. No actual configuration resides here since
- # there was only ever a bare-bones ix86 configuration for
- # a.out and it exists solely in the machine-specific section.
- # This place-holder must exist to avoid dropping into
- # the generic ELF configuration of FreeBSD (i.e. it must be
- # ordered before that section).
- ;;
*-*-freebsd*)
# This is the generic ELF configuration of FreeBSD. Later
# machine-specific sections may refine and add to this
use_gcc_stdint=wrap
;;
*-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu | *-*-gnu* | *-*-kopensolaris*-gnu)
+ extra_options="$extra_options gnu-user.opt"
extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
gas=yes
gnu_ld=yes
case $target in
*linux*)
extra_options="$extra_options linux.opt";;
- *)
- tm_defines="$tm_defines OPTION_GLIBC=1";;
esac
case $target in
*-*-*android*)
case ${enable_threads} in
yes) thread_file='rtems' ;;
esac
+ extra_options="${extra_options} rtems.opt"
use_gcc_stdint=wrap
;;
*-*-uclinux*)
+ extra_options="$extra_options gnu-user.opt"
use_gcc_stdint=wrap
+ tm_defines="$tm_defines DEFAULT_LIBC=LIBC_UCLIBC SINGLE_LIBC"
;;
*-*-solaris2*)
+ # i?86-*-solaris2* needs to insert headers between cpu default and
+ # Solaris 2 specific ones.
+ sol2_tm_file="dbxelf.h elfos.h ${cpu_type}/sysv4.h sol2.h ${cpu_type}/sol2.h"
+ case ${target} in
+ *-*-solaris2.1[0-9]*)
+ sol2_tm_file="${sol2_tm_file} sol2-10.h"
+ use_gcc_stdint=wrap
+ ;;
+ *)
+ use_gcc_stdint=provide
+ ;;
+ esac
+ if test x$gnu_ld = xyes; then
+ tm_file="usegld.h ${tm_file}"
+ fi
+ if test x$gas = xyes; then
+ tm_file="usegas.h ${tm_file}"
+ fi
+ tm_p_file="${tm_p_file} sol2-protos.h"
+ tmake_file="${tmake_file} t-sol2 t-slibgcc-dummy"
+ c_target_objs="${c_target_objs} sol2-c.o"
+ cxx_target_objs="${cxx_target_objs} sol2-c.o"
+ extra_objs="sol2.o"
extra_options="${extra_options} sol2.opt"
+ case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
+ "":yes:* | yes:yes:* )
+ thread_file=posix
+ ;;
+ esac
+ ;;
+*-*-*vms*)
+ extra_options="${extra_options} vms/vms.opt"
+ xmake_file=vms/x-vms
+ tmake_file="vms/t-vms"
+ extra_objs="vms.o"
+ target_gtfiles="$target_gtfiles \$(srcdir)/config/vms/vms.c"
+ tm_p_file="${tm_p_file} vms/vms-protos.h"
+ if test x$gnu_ld != xyes; then
+ # Build wrappers for native case.
+ extra_programs="ld\$(exeext) ar\$(exeext)"
+ tmake_file="$tmake_file vms/t-vmsnative"
+ fi
;;
*-*-vxworks*)
tmake_file=t-vxworks
;;
alpha*-*-linux*)
tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h glibc-stdint.h"
+ extra_options="${extra_options} alpha/elf.opt"
target_cpu_default="MASK_GAS"
tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee alpha/t-linux"
;;
-alpha*-*-gnu*)
- tm_file="$tm_file alpha/elf.h alpha/linux.h alpha/linux-elf.h gnu.h glibc-stdint.h alpha/gnu.h"
- target_cpu_default="MASK_GAS"
- tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
- ;;
alpha*-*-freebsd*)
tm_file="${tm_file} ${fbsd_tm_file} alpha/elf.h alpha/freebsd.h"
+ extra_options="${extra_options} alpha/elf.opt"
target_cpu_default="MASK_GAS"
tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
;;
alpha*-*-netbsd*)
tm_file="${tm_file} netbsd.h alpha/elf.h netbsd-elf.h alpha/netbsd.h"
+ extra_options="${extra_options} netbsd.opt netbsd-elf.opt \
+ alpha/elf.opt"
target_cpu_default="MASK_GAS"
tmake_file="${tmake_file} alpha/t-alpha alpha/t-ieee"
;;
alpha*-*-openbsd*)
tm_defines="${tm_defines} OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_FUNCTION_SIZE OBSD_HAS_DECLARE_OBJECT"
tm_file="alpha/alpha.h alpha/elf.h openbsd.h openbsd-stdint.h alpha/openbsd.h openbsd-libpthread.h"
+ extra_options="${extra_options} openbsd.opt alpha/elf.opt"
# default x-alpha is only appropriate for dec-osf.
target_cpu_default="MASK_GAS"
tmake_file="${tmake_file} alpha/t-alpha alpha/t-ieee"
then
tm_file="${tm_file} dbx.h"
fi
- if test x$gas != xyes
+ # mips-tfile and mips-tdump are only used with the native assembler
+ # and require the Tru64 UNIX <a.out.h>, so only build native.
+ if test x$gas != xyes && test x${host} = x${target}
then
extra_passes="mips-tfile mips-tdump"
fi
use_collect2=yes
- tmake_file="alpha/t-alpha alpha/t-ieee alpha/t-crtfm alpha/t-osf5"
+ tmake_file="t-slibgcc-dummy"
tm_file="${tm_file} alpha/osf5.h"
tm_defines="${tm_defines} TARGET_SUPPORT_ARCH=1"
- extra_options="${extra_options} rpath.opt"
+ extra_options="${extra_options} rpath.opt alpha/osf5.opt"
extra_headers=va_list.h
use_gcc_stdint=provide
case ${enable_threads} in
"" | yes | posix)
thread_file='posix'
- tmake_file="${tmake_file} alpha/t-osf-pthread"
;;
esac
;;
alpha64-dec-*vms*)
tm_file="${tm_file} alpha/vms.h alpha/vms64.h"
xm_file="alpha/xm-vms.h vms/xm-vms64.h"
- tmake_file="alpha/t-alpha vms/t-vms alpha/t-vms alpha/t-ieee"
- xmake_file=vms/x-vms
- exeext=.exe
- install_headers_dir=install-headers-cp
- extra_options="${extra_options} vms/vms.opt"
+ tmake_file="${tmake_file} alpha/t-alpha vms/t-vms64 alpha/t-vms alpha/t-ieee"
;;
alpha*-dec-*vms*)
tm_file="${tm_file} alpha/vms.h"
xm_file="alpha/xm-vms.h"
- tmake_file="alpha/t-alpha vms/t-vms alpha/t-vms alpha/t-ieee"
- xmake_file=vms/x-vms
- exeext=.exe
- install_headers_dir=install-headers-cp
- extra_options="${extra_options} vms/vms.opt"
- ;;
-arc-*-elf*)
- tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file}"
- extra_parts="crtinit.o crtfini.o"
+ tmake_file="${tmake_file} alpha/t-alpha alpha/t-vms alpha/t-ieee"
;;
arm-wrs-vxworks)
tm_file="elfos.h arm/elf.h arm/aout.h ${tm_file} vx-common.h vxworks.h arm/vxworks.h"
+ extra_options="${extra_options} arm/vxworks.opt"
tmake_file="${tmake_file} arm/t-arm arm/t-vxworks"
;;
arm*-*-freebsd*)
;;
arm*-*-netbsdelf*)
tm_file="dbxelf.h elfos.h netbsd.h netbsd-elf.h arm/elf.h arm/aout.h arm/arm.h arm/netbsd-elf.h"
+ extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
tmake_file="${tmake_file} arm/t-arm arm/t-netbsd"
;;
-arm*-*-netbsd*)
- tm_file="arm/aout.h arm/arm.h netbsd.h netbsd-aout.h arm/netbsd.h"
- tmake_file="t-netbsd arm/t-arm arm/t-netbsd"
- extra_parts=""
- use_collect2=yes
- ;;
arm*-*-linux*) # ARM GNU/Linux with ELF
- tm_file="dbxelf.h elfos.h linux.h linux-android.h glibc-stdint.h arm/elf.h arm/linux-gas.h arm/linux-elf.h"
+ tm_file="dbxelf.h elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h arm/elf.h arm/linux-gas.h arm/linux-elf.h"
case $target in
arm*b-*)
tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
case ${target} in
arm*-*-linux-*eabi)
tm_file="$tm_file arm/bpabi.h arm/linux-eabi.h"
- tm_file="$tm_file ../../libgcc/config/arm/bpabi.h"
+ libgcc_tm_file="$libgcc_tm_file arm/bpabi-lib.h"
tmake_file="$tmake_file arm/t-arm-elf arm/t-bpabi arm/t-linux-eabi t-slibgcc-libgcc"
# Define multilib configuration for arm-linux-androideabi.
case ${target} in
tmake_file="$tmake_file arm/t-linux"
;;
esac
+ with_tls=${with_tls:-gnu}
tm_file="$tm_file arm/aout.h arm/arm.h"
tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
;;
case ${target} in
arm*-*-uclinux*eabi)
tm_file="$tm_file arm/bpabi.h arm/uclinux-eabi.h"
- tm_file="$tm_file ../../libgcc/config/arm/bpabi.h"
+ libgcc_tm_file="$libgcc_tm_file arm/bpabi-lib.h"
tmake_file="$tmake_file arm/t-bpabi"
# The BPABI long long divmod functions return a 128-bit value in
# registers r0-r3. Correctly modeling that requires the use of
need_64bit_hwint=yes
default_use_cxa_atexit=yes
tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/bpabi.h"
- tm_file="$tm_file ../../libgcc/config/arm/bpabi.h"
+ libgcc_tm_file="$libgcc_tm_file arm/bpabi-lib.h"
tmake_file="arm/t-arm arm/t-arm-elf"
case ${target} in
arm*-*-eabi*)
;;
arm*-*-symbianelf*)
tm_file="${tm_file} arm/symbian.h"
+ libgcc_tm_file="$libgcc_tm_file arm/symbian-lib.h"
# We do not include t-bpabi for Symbian OS because the system
# provides its own implementation of the BPABI functions.
tmake_file="${tmake_file} arm/t-symbian"
extra_options="${extra_options} arm/pe.opt"
extra_objs="pe.o"
;;
-arm-*-pe*)
- tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h newlib-stdint.h"
- tmake_file="arm/t-arm arm/t-pe"
- use_gcc_stdint=wrap
- extra_options="${extra_options} arm/pe.opt"
- extra_objs="pe.o"
- ;;
avr-*-rtems*)
- tm_file="avr/avr.h dbxelf.h avr/rtems.h rtems.h newlib-stdint.h"
+ tm_file="elfos.h avr/elf.h avr/avr.h dbxelf.h avr/rtems.h rtems.h newlib-stdint.h"
tmake_file="avr/t-avr t-rtems avr/t-rtems"
extra_gcc_objs="driver-avr.o avr-devices.o"
extra_objs="avr-devices.o"
;;
avr-*-*)
- tm_file="avr/avr.h dbxelf.h newlib-stdint.h"
+ tm_file="elfos.h avr/elf.h avr/avr.h dbxelf.h newlib-stdint.h"
use_gcc_stdint=wrap
extra_gcc_objs="driver-avr.o avr-devices.o"
extra_objs="avr-devices.o"
use_collect2=no
;;
bfin*-uclinux*)
- tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h linux.h glibc-stdint.h bfin/uclinux.h"
+ tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h gnu-user.h linux.h glibc-stdint.h bfin/uclinux.h"
tmake_file=bfin/t-bfin-uclinux
- tm_defines="${tm_defines} DEFAULT_LIBC=LIBC_UCLIBC"
- extra_options="${extra_options} linux.opt"
use_collect2=no
;;
bfin*-linux-uclibc*)
- tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h linux.h glibc-stdint.h bfin/linux.h ./linux-sysroot-suffix.h"
+ tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h gnu-user.h linux.h glibc-stdint.h bfin/linux.h ./linux-sysroot-suffix.h"
tmake_file="t-slibgcc-elf-ver bfin/t-bfin-linux"
extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
use_collect2=no
use_gcc_stdint=wrap
;;
crisv32-*-linux* | cris-*-linux*)
- tm_file="dbxelf.h elfos.h ${tm_file} linux.h glibc-stdint.h cris/linux.h"
+ tm_file="dbxelf.h elfos.h ${tm_file} gnu-user.h linux.h glibc-stdint.h cris/linux.h"
# We need to avoid using t-linux, so override default tmake_file
tmake_file="cris/t-cris t-slibgcc-elf-ver cris/t-linux"
extra_options="${extra_options} cris/linux.opt"
;;
esac
;;
-crx-*-elf)
- tm_file="elfos.h newlib-stdint.h ${tm_file}"
- extra_parts="crtbegin.o crtend.o"
- use_collect2=no
- ;;
fr30-*-elf)
tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
tmake_file=fr30/t-fr30
;;
frv-*-elf)
tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
- tm_file="${tm_file} ../../libgcc/config/frv/frv-abi.h"
+ libgcc_tm_file="${libgcc_tm_file} frv/frv-abi.h"
tmake_file=frv/t-frv
;;
frv-*-*linux*)
tm_file="dbxelf.h elfos.h ${tm_file} \
- linux.h glibc-stdint.h frv/linux.h"
- tm_file="${tm_file} ../../libgcc/config/frv/frv-abi.h"
+ gnu-user.h linux.h glibc-stdint.h frv/linux.h"
+ libgcc_tm_file="${libgcc_tm_file} frv/frv-abi.h"
tmake_file="${tmake_file} frv/t-frv frv/t-linux"
;;
moxie-*-elf)
gas=yes
gnu_ld=yes
- tm_file="dbxelf.h elfos.h ${tm_file}"
+ tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
extra_parts="crti.o crtn.o crtbegin.o crtend.o"
tmake_file="${tmake_file} moxie/t-moxie moxie/t-moxie-softfp soft-fp/t-softfp"
;;
moxie-*-uclinux*)
gas=yes
gnu_ld=yes
- tm_file="dbxelf.h elfos.h ${tm_file} linux.h glibc-stdint.h moxie/uclinux.h"
+ tm_file="dbxelf.h elfos.h ${tm_file} gnu-user.h linux.h glibc-stdint.h moxie/uclinux.h"
extra_parts="crti.o crtn.o crtbegin.o crtend.o"
tmake_file="${tmake_file} moxie/t-moxie moxie/t-moxie-softfp soft-fp/t-softfp"
- tm_defines="${tm_defines} DEFAULT_LIBC=LIBC_UCLIBC"
- extra_options="${extra_options} linux.opt"
;;
moxie-*-rtems*)
tmake_file="${tmake_file} moxie/t-moxie moxie/t-moxie-softfp soft-fp/t-softfp t-rtems"
;;
hppa*64*-*-linux*)
target_cpu_default="MASK_PA_11|MASK_PA_20"
- tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h linux.h \
+ tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h gnu-user.h linux.h \
glibc-stdint.h pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h \
pa/pa64-linux.h"
tmake_file="${tmake_file} pa/t-linux64"
;;
hppa*-*-linux*)
target_cpu_default="MASK_PA_11|MASK_NO_SPACE_REGS"
- tm_file="${tm_file} dbxelf.h elfos.h linux.h glibc-stdint.h pa/pa-linux.h \
+ tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h pa/pa-linux.h \
pa/pa32-regs.h pa/pa32-linux.h"
tmake_file="${tmake_file} pa/t-linux t-slibgcc-libgcc"
# Set the libgcc version number
esac
tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
pa/pa-hpux.h pa/pa-hpux10.h"
- extra_options="${extra_options} pa/pa-hpux.opt"
+ extra_options="${extra_options} pa/pa-hpux.opt pa/pa-hpux10.opt"
case ${target} in
*-*-hpux10.[1-9]*)
tm_file="${tm_file} pa/pa-hpux1010.h"
pa/pa64-regs.h pa/pa-hpux.h pa/pa-hpux1010.h \
pa/pa-hpux11.h"
case ${target} in
- *-*-hpux11.[1-9]*)
+ *-*-hpux11.[12]*)
tm_file="${tm_file} pa/pa-hpux1111.h pa/pa-64.h pa/pa64-hpux.h"
extra_options="${extra_options} pa/pa-hpux1111.opt"
;;
+ *-*-hpux11.[3-9]*)
+ tm_file="${tm_file} pa/pa-hpux1131.h pa/pa-64.h pa/pa64-hpux.h"
+ extra_options="${extra_options} pa/pa-hpux1131.opt"
+ ;;
*)
tm_file="${tm_file} pa/pa-64.h pa/pa64-hpux.h"
;;
esac
extra_options="${extra_options} pa/pa-hpux.opt \
- pa/pa-hpux1010.opt pa/pa64-hpux.opt"
+ pa/pa-hpux1010.opt pa/pa64-hpux.opt hpux11.opt"
need_64bit_hwint=yes
tmake_file="pa/t-pa64 pa/t-pa-hpux pa/t-hpux-shlib"
# Set the libgcc version number
esac
tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
pa/pa-hpux.h pa/pa-hpux1010.h pa/pa-hpux11.h"
- extra_options="${extra_options} pa/pa-hpux.opt pa/pa-hpux1010.opt"
+ extra_options="${extra_options} pa/pa-hpux.opt pa/pa-hpux1010.opt \
+ hpux11.opt"
case ${target} in
- *-*-hpux11.[1-9]*)
+ *-*-hpux11.[12]*)
tm_file="${tm_file} pa/pa-hpux1111.h"
extra_options="${extra_options} pa/pa-hpux1111.opt"
;;
+ *-*-hpux11.[3-9]*)
+ tm_file="${tm_file} pa/pa-hpux1131.h"
+ extra_options="${extra_options} pa/pa-hpux1131.opt"
+ ;;
esac
tmake_file="pa/t-pa-hpux11 pa/t-pa-hpux pa/t-hpux-shlib"
# Set the libgcc version number
need_64bit_isa=yes
# Baseline choice for a machine that allows m64 support.
with_cpu=${with_cpu:-core2}
- tmake_file="${tmake_file} t-slibgcc-darwin i386/t-crtpc i386/t-crtfm"
+ tmake_file="${tmake_file} t-slibgcc-dummy i386/t-crtpc i386/t-crtfm"
+ libgcc_tm_file="$libgcc_tm_file i386/darwin-lib.h"
;;
x86_64-*-darwin*)
with_cpu=${with_cpu:-core2}
- tmake_file="${tmake_file} ${cpu_type}/t-darwin64 t-slibgcc-darwin i386/t-crtpc i386/t-crtfm"
+ tmake_file="${tmake_file} ${cpu_type}/t-darwin64 t-slibgcc-dummy i386/t-crtpc i386/t-crtfm"
tm_file="${tm_file} ${cpu_type}/darwin64.h"
+ libgcc_tm_file="$libgcc_tm_file i386/darwin-lib.h"
;;
i[34567]86-*-elf*)
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h"
;;
i[34567]86-*-freebsd*)
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/freebsd.h"
+ tmake_file="${tmake_file} i386/t-crtstuff"
;;
x86_64-*-freebsd*)
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/x86-64.h i386/freebsd.h i386/freebsd64.h"
;;
i[34567]86-*-netbsdelf*)
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/netbsd-elf.h"
- ;;
-i[34567]86-*-netbsd*)
- tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h netbsd.h netbsd-aout.h i386/netbsd.h"
- tmake_file="${tmake_file} t-netbsd"
- extra_parts=""
- use_collect2=yes
+ extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
;;
x86_64-*-netbsd*)
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/x86-64.h i386/netbsd64.h"
+ extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
tmake_file="${tmake_file} i386/t-crtstuff"
;;
i[34567]86-*-openbsd2.*|i[34567]86-*openbsd3.[0123])
tm_file="i386/i386.h i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h openbsd-oldgas.h openbsd.h i386/openbsd.h"
+ extra_options="${extra_options} openbsd.opt"
# needed to unconfuse gdb
tmake_file="${tmake_file} t-libc-ok t-openbsd i386/t-openbsd"
# we need collect2 until our bug is fixed...
i[34567]86-*-openbsd*)
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h"
tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h i386/openbsdelf.h"
+ extra_options="${extra_options} openbsd.opt"
gas=yes
gnu_ld=yes
;;
i[34567]86-*-linux* | i[34567]86-*-kfreebsd*-gnu | i[34567]86-*-knetbsd*-gnu | i[34567]86-*-gnu* | i[34567]86-*-kopensolaris*-gnu)
# Intel 80386's running GNU/*
# with ELF format using glibc 2
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h"
+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h gnu-user.h glibc-stdint.h"
case ${target} in
i[34567]86-*-linux*)
+ tm_file="${tm_file} linux.h"
# Assume modern glibc
default_gnu_indirect_function=yes
if test x$enable_targets = xall; then
- tm_file="${tm_file} i386/x86-64.h i386/linux64.h"
+ tm_file="${tm_file} i386/x86-64.h i386/gnu-user64.h i386/linux64.h"
tm_defines="${tm_defines} TARGET_BI_ARCH=1"
tmake_file="${tmake_file} i386/t-linux64"
+ x86_multilibs="${with_multilib_list}"
+ if test "$x86_multilibs" = "default"; then
+ x86_multilibs="m64,m32"
+ fi
+ x86_multilibs=`echo $x86_multilibs | sed -e 's/,/ /g'`
+ for x86_multilib in ${x86_multilibs}; do
+ case ${x86_multilib} in
+ m32 | m64 | mx32)
+ TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG},${x86_multilib}"
+ ;;
+ *)
+ echo "--with-multilib-list=${x86_with_multilib} not supported."
+ exit 1
+ esac
+ done
+ TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's/^,//'`
need_64bit_hwint=yes
need_64bit_isa=yes
case X"${with_cpu}" in
- Xgeneric|Xatom|Xcore2|Xcorei7|Xcorei7-avx|Xnocona|Xx86-64|Xbdver1|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx|Xathlon64-sse3|Xk8-sse3|Xopteron-sse3)
+ Xgeneric|Xatom|Xcore2|Xcorei7|Xcorei7-avx|Xnocona|Xx86-64|Xbdver1|Xbtver1|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx|Xathlon64-sse3|Xk8-sse3|Xopteron-sse3)
;;
X)
if test x$with_cpu_64 = x; then
;;
*)
echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
- echo "generic atom core2 corei7 corei7-avx nocona x86-64 bdver1 amdfam10 barcelona k8 opteron athlon64 athlon-fx athlon64-sse3 k8-sse3 opteron-sse3" 1>&2
+ echo "generic atom core2 corei7 corei7-avx nocona x86-64 bdver1 btver1 amdfam10 barcelona k8 opteron athlon64 athlon-fx athlon64-sse3 k8-sse3 opteron-sse3" 1>&2
exit 1
;;
esac
else
- tm_file="${tm_file} i386/linux.h"
+ tm_file="${tm_file} i386/gnu-user.h i386/linux.h"
fi
;;
- i[34567]86-*-knetbsd*-gnu) tm_file="${tm_file} i386/linux.h knetbsd-gnu.h i386/knetbsd-gnu.h" ;;
- i[34567]86-*-kfreebsd*-gnu) tm_file="${tm_file} i386/linux.h kfreebsd-gnu.h i386/kfreebsd-gnu.h" ;;
- i[34567]86-*-kopensolaris*-gnu) tm_file="${tm_file} i386/linux.h kopensolaris-gnu.h i386/kopensolaris-gnu.h" ;;
- i[34567]86-*-gnu*) tm_file="$tm_file i386/linux.h gnu.h i386/gnu.h";;
+ i[34567]86-*-knetbsd*-gnu) tm_file="${tm_file} i386/gnu-user.h knetbsd-gnu.h i386/knetbsd-gnu.h" ;;
+ i[34567]86-*-kfreebsd*-gnu) tm_file="${tm_file} i386/gnu-user.h kfreebsd-gnu.h i386/kfreebsd-gnu.h" ;;
+ i[34567]86-*-kopensolaris*-gnu) tm_file="${tm_file} i386/gnu-user.h kopensolaris-gnu.h i386/kopensolaris-gnu.h" ;;
+ i[34567]86-*-gnu*) tm_file="$tm_file i386/gnu-user.h gnu.h i386/gnu.h";;
esac
tmake_file="${tmake_file} i386/t-crtstuff i386/t-crtpc i386/t-crtfm t-dfprules"
;;
x86_64-*-linux* | x86_64-*-kfreebsd*-gnu | x86_64-*-knetbsd*-gnu)
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h \
- i386/x86-64.h i386/linux64.h"
+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h gnu-user.h glibc-stdint.h \
+ i386/x86-64.h i386/gnu-user64.h"
case ${target} in
x86_64-*-linux*)
+ tm_file="${tm_file} linux.h i386/linux64.h"
default_gnu_indirect_function=glibc-2011 ;;
- x86_64-*-kfreebsd*-gnu) tm_file="${tm_file} kfreebsd-gnu.h" ;;
+ x86_64-*-kfreebsd*-gnu) tm_file="${tm_file} kfreebsd-gnu.h i386/kfreebsd-gnu64.h" ;;
x86_64-*-knetbsd*-gnu) tm_file="${tm_file} knetbsd-gnu.h" ;;
esac
tmake_file="${tmake_file} i386/t-linux64 i386/t-crtstuff i386/t-crtpc i386/t-crtfm t-dfprules"
+ x86_multilibs="${with_multilib_list}"
+ if test "$x86_multilibs" = "default"; then
+ x86_multilibs="m64,m32"
+ fi
+ x86_multilibs=`echo $x86_multilibs | sed -e 's/,/ /g'`
+ for x86_multilib in ${x86_multilibs}; do
+ case ${x86_multilib} in
+ m32 | m64 | mx32)
+ TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG},${x86_multilib}"
+ ;;
+ *)
+ echo "--with-multilib-list=${x86_with_multilib} not supported."
+ exit 1
+ esac
+ done
+ TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's/^,//'`
;;
i[34567]86-pc-msdosdjgpp*)
xm_file=i386/xm-djgpp.h
- tm_file="dbxcoff.h ${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/djgpp.h"
+ tm_file="dbxcoff.h ${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/djgpp.h i386/djgpp-stdint.h"
tmake_file="${tmake_file} i386/t-djgpp"
extra_options="${extra_options} i386/djgpp.opt"
gnu_ld=yes
gas=yes
;;
i[3456x]86-*-netware*)
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h tm-dwarf2.h i386/netware.h"
+ tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h tm-dwarf2.h i386/netware.h"
tmake_file="${tmake_file} i386/t-netware"
extra_objs=netware.o
+ extra_options="${extra_options} i386/netware.opt"
case /${with_ld} in
*/nwld)
extra_objs="$extra_objs nwld.o"
tm_file="${tm_file} i386/nwld.h"
- tmake_file="${tmake_file} i386/t-nwld"
+ tmake_file="${tmake_file} i386/t-nwld t-slibgcc-dummy"
extra_parts="crt0.o libgcc.def libc.def libcpre.def posixpre.def"
;;
esac
esac
;;
i[34567]86-*-nto-qnx*)
- tm_file="${tm_file} i386/att.h dbxelf.h tm-dwarf2.h elfos.h svr4.h i386/unix.h i386/nto.h"
+ tm_file="${tm_file} i386/att.h dbxelf.h tm-dwarf2.h elfos.h i386/unix.h i386/nto.h"
+ extra_options="${extra_options} i386/nto.opt"
tmake_file="${tmake_file} i386/t-nto"
gnu_ld=yes
gas=yes
;;
i[34567]86-*-rtems*)
tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/rtemself.h rtems.h newlib-stdint.h"
- extra_parts="crtbegin.o crtend.o crti.o crtn.o"
- tmake_file="${tmake_file} i386/t-rtems-i386 i386/t-crtstuff t-rtems"
+ tmake_file="${tmake_file} i386/t-rtems t-rtems"
;;
-i[34567]86-*-solaris2*)
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h sol2.h"
+i[34567]86-*-solaris2* | x86_64-*-solaris2.1[0-9]*)
+ tm_file="${tm_file} i386/unix.h i386/att.h ${sol2_tm_file}"
# Set default arch_32 to pentium4, tune_32 to generic like the other
# i386 targets, although config.guess defaults to i386-pc-solaris2*.
case ${target} in
with_tune_32=${with_tune_32:-generic}
case ${target} in
*-*-solaris2.1[0-9]*)
- tm_file="${tm_file} sol2-10.h"
- ;;
- esac
- tm_file="${tm_file} i386/sol2.h"
- if test x$gnu_ld = xyes; then
- tm_file="${tm_file} sol2-gld.h"
- fi
- if test x$gas = xyes; then
- tm_file="${tm_file} i386/sol2-gas.h"
- fi
- tmake_file="${tmake_file} t-sol2 t-svr4"
- c_target_objs="${c_target_objs} sol2-c.o"
- cxx_target_objs="${cxx_target_objs} sol2-c.o"
- extra_objs="sol2.o"
- tm_p_file="${tm_p_file} sol2-protos.h"
- if test x$gnu_ld = xyes; then
- tmake_file="$tmake_file t-slibgcc-elf-ver"
- tm_defines="${tm_defines} TARGET_GNU_LD=1"
- else
- tmake_file="$tmake_file t-slibgcc-sld"
- fi
- if test x$gas = xyes; then
- tm_file="usegas.h ${tm_file}"
- fi
- tm_file="$tm_file tm-dwarf2.h"
- case ${target} in
- *-*-solaris2.1[0-9]*)
- tm_file="${tm_file} i386/x86-64.h i386/sol2-10.h"
+ tm_file="${tm_file} i386/x86-64.h i386/sol2-bi.h sol2-bi.h"
tm_defines="${tm_defines} TARGET_BI_ARCH=1"
- tmake_file="$tmake_file i386/t-sol2-10"
- # i386/t-crtstuff only affects libgcc. Its inclusion
- # depends on a runtime test and is thus performed in
- # libgcc/configure.ac instead.
+ tmake_file="$tmake_file i386/t-sol2-64"
need_64bit_hwint=yes
need_64bit_isa=yes
- use_gcc_stdint=wrap
case X"${with_cpu}" in
- Xgeneric|Xatom|Xcore2|Xcorei7|Xcorei7-avx|Xnocona|Xx86-64|Xbdver1|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx|Xathlon64-sse3|Xk8-sse3|Xopteron-sse3)
+ Xgeneric|Xatom|Xcore2|Xcorei7|Xcorei7-avx|Xnocona|Xx86-64|Xbdver1|Xbtver1|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx|Xathlon64-sse3|Xk8-sse3|Xopteron-sse3)
;;
X)
if test x$with_cpu_64 = x; then
;;
*)
echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
- echo "generic atom core2 corei7 corei7-avx nocona x86-64 bdver1 amdfam10 barcelona k8 opteron athlon64 athlon-fx athlon64-sse3 k8-sse3 opteron-sse3" 1>&2
+ echo "generic atom core2 corei7 corei7-avx nocona x86-64 bdver1 btver1 amdfam10 barcelona k8 opteron athlon64 athlon-fx athlon64-sse3 k8-sse3 opteron-sse3" 1>&2
exit 1
;;
esac
;;
- *)
- use_gcc_stdint=provide
- ;;
- esac
- case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
- "":yes:* | yes:yes:* )
- thread_file=posix
- ;;
- "":*:yes | yes:*:yes )
- thread_file=solaris
- ;;
esac
;;
i[4567]86-wrs-vxworks|i[4567]86-wrs-vxworksae)
- tm_file="${tm_file} i386/unix.h i386/att.h elfos.h svr4.h vx-common.h"
+ tm_file="${tm_file} i386/unix.h i386/att.h elfos.h vx-common.h"
case ${target} in
*-vxworksae*)
tm_file="${tm_file} vxworksae.h i386/vx-common.h i386/vxworksae.h"
;;
esac
;;
-i[34567]86-*-pe | i[34567]86-*-cygwin*)
+i[34567]86-*-cygwin*)
tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/cygwin.h i386/cygwin-stdint.h"
xm_file=i386/xm-cygwin.h
# This has to match the logic for DWARF2_UNWIND_INFO in gcc/config/i386/cygming.h
else
tmake_eh_file="i386/t-sjlj-eh"
fi
- tmake_file="${tmake_file} ${tmake_eh_file} i386/t-cygming i386/t-cygwin"
+ # Shared libgcc DLL install dir depends on cross/native build.
+ if test x${host} = x${target} ; then
+ tmake_dlldir_file="i386/t-dlldir"
+ else
+ tmake_dlldir_file="i386/t-dlldir-x"
+ fi
+ tmake_file="${tmake_file} ${tmake_eh_file} ${tmake_dlldir_file} i386/t-cygming i386/t-cygwin t-dfprules"
target_gtfiles="\$(srcdir)/config/i386/winnt.c"
extra_options="${extra_options} i386/cygming.opt"
extra_objs="winnt.o winnt-stubs.o"
use_gcc_stdint=wrap
;;
i[34567]86-*-mingw* | x86_64-*-mingw*)
- tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/mingw32.h"
+ tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h"
xm_file=i386/xm-mingw32.h
case ${target} in
x86_64-*-* | *-w64-*)
*)
;;
esac
+ if test x$enable_threads = xposix ; then
+ tm_file="${tm_file} i386/mingw-pthread.h"
+ fi
+ tm_file="${tm_file} i386/mingw32.h"
# This makes the logic if mingw's or the w64 feature set has to be used
case ${target} in
*-w64-*)
if test x$enable_targets = xall; then
tm_defines="${tm_defines} TARGET_BI_ARCH=1"
case X"${with_cpu}" in
- Xgeneric|Xatom|Xcore2|Xcorei7|Xcorei7-avx|Xnocona|Xx86-64|Xbdver1|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx|Xathlon64-sse3|Xk8-sse3|Xopteron-sse3)
+ Xgeneric|Xatom|Xcore2|Xcorei7|Xcorei7-avx|Xnocona|Xx86-64|Xbdver1|Xbtver1|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx|Xathlon64-sse3|Xk8-sse3|Xopteron-sse3)
;;
X)
if test x$with_cpu_64 = x; then
;;
*)
echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
- echo "generic atom core2 corei7 Xcorei7-avx nocona x86-64 bdver1 amdfam10 barcelona k8 opteron athlon64 athlon-fx athlon64-sse3 k8-sse3 opteron-sse3" 1>&2
+ echo "generic atom core2 corei7 Xcorei7-avx nocona x86-64 bdver1 btver1 amdfam10 barcelona k8 opteron athlon64 athlon-fx athlon64-sse3 k8-sse3 opteron-sse3" 1>&2
exit 1
;;
esac
else
tmake_eh_file="i386/t-sjlj-eh"
fi
- tmake_file="${tmake_file} ${tmake_eh_file} i386/t-cygming t-dfprules"
+ # Shared libgcc DLL install dir depends on cross/native build.
+ if test x${host} = x${target} ; then
+ tmake_dlldir_file="i386/t-dlldir"
+ else
+ tmake_dlldir_file="i386/t-dlldir-x"
+ fi
+ tmake_file="${tmake_file} ${tmake_eh_file} ${tmake_dlldir_file} i386/t-cygming t-dfprules"
case ${target} in
x86_64-w64-*)
tmake_file="${tmake_file} i386/t-mingw-w64"
use_gcc_stdint=wrap
case ${enable_threads} in
"" | yes | win32) thread_file='win32'
- tmake_file="${tmake_file} i386/t-gthr-win32"
- ;;
+ tmake_file="${tmake_file} i386/t-gthr-win32"
+ ;;
+ posix)
+ thread_file='posix'
+ tmake_file="i386/t-mingw-pthread ${tmake_file}"
+ ;;
esac
case ${target} in
x86_64-*-mingw*)
i[34567]86-*-interix3*)
tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/i386-interix.h i386/i386-interix3.h interix.h interix3.h"
tmake_file="${tmake_file} i386/t-interix"
- extra_options="${extra_options} rpath.opt"
+ extra_options="${extra_options} rpath.opt interix.opt"
extra_objs=winnt.o
target_gtfiles="\$(srcdir)/config/i386/winnt.c"
if test x$enable_threads = xyes ; then
extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
;;
ia64*-*-linux*)
- tm_file="${tm_file} dbxelf.h elfos.h linux.h glibc-stdint.h ia64/sysv4.h ia64/linux.h"
+ tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ia64/sysv4.h ia64/linux.h"
tmake_file="${tmake_file} ia64/t-ia64 t-libunwind ia64/t-glibc"
if test x$with_system_libunwind != xyes ; then
tmake_file="${tmake_file} t-libunwind-elf ia64/t-glibc-libunwind"
use_collect2=no
c_target_objs="ia64-c.o"
cxx_target_objs="ia64-c.o"
- extra_options="${extra_options} ia64/ilp32.opt"
+ extra_options="${extra_options} ia64/ilp32.opt hpux11.opt"
use_gcc_stdint=wrap
tm_file="${tm_file} hpux-stdint.h"
+ case ${target} in
+ *-*-hpux11.3*)
+ tm_file="${tm_file} ia64/hpux-unix2003.h"
+ ;;
+ esac
;;
ia64-hp-*vms*)
tm_file="${tm_file} elfos.h ia64/sysv4.h ia64/elf.h ia64/vms.h ia64/vms64.h"
xm_file="vms/xm-vms.h vms/xm-vms64.h"
- tmake_file="vms/t-vms ia64/t-ia64 ia64/t-vms"
- xmake_file=vms/x-vms
+ tmake_file="${tmake_file} vms/t-vms64 ia64/t-ia64 ia64/t-vms"
target_cpu_default="0"
if test x$gas = xyes
then
target_cpu_default="${target_cpu_default}|MASK_GNU_AS"
fi
- exeext=.exe
- install_headers_dir=install-headers-cp
- extra_options="${extra_options} vms/vms.opt"
+ extra_options="${extra_options} ia64/vms.opt"
;;
iq2000*-*-elf*)
tm_file="elfos.h newlib-stdint.h iq2000/iq2000.h"
tmake_file="${tmake_file} t-rtems"
;;
lm32-*-uclinux*)
- tm_file="dbxelf.h elfos.h ${tm_file} linux.h lm32/uclinux-elf.h"
+ tm_file="dbxelf.h elfos.h ${tm_file} gnu-user.h linux.h lm32/uclinux-elf.h"
tmake_file="${tmake_file} lm32/t-lm32 lm32/t-fprules-softfp soft-fp/t-softfp"
;;
m32r-*-elf*)
extra_parts="crtinit.o crtfini.o"
;;
m32r-*-linux*)
- tm_file="dbxelf.h elfos.h linux.h glibc-stdint.h ${tm_file} m32r/linux.h"
+ tm_file="dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ${tm_file} m32r/linux.h"
# We override the tmake_file for linux -- why?
tmake_file="t-slibgcc-elf-ver m32r/t-linux"
gnu_ld=yes
fi
;;
m32rle-*-linux*)
- tm_file="dbxelf.h elfos.h linux.h glibc-stdint.h m32r/little.h ${tm_file} m32r/linux.h"
+ tm_file="dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h m32r/little.h ${tm_file} m32r/linux.h"
# We override the tmake_file for linux -- why?
tmake_file="t-slibgcc-elf-ver m32r/t-linux"
gnu_ld=yes
thread_file='posix'
fi
;;
-# m68hc11 and m68hc12 share the same machine description.
-m68hc11-*-*|m6811-*-*)
- tm_file="dbxelf.h elfos.h usegas.h newlib-stdint.h m68hc11/m68hc11.h"
- tm_p_file="m68hc11/m68hc11-protos.h"
- md_file="m68hc11/m68hc11.md"
- out_file="m68hc11/m68hc11.c"
- tmake_file="m68hc11/t-m68hc11"
- use_gcc_stdint=wrap
- ;;
-m68hc12-*-*|m6812-*-*)
- tm_file="m68hc11/m68hc12.h dbxelf.h elfos.h usegas.h newlib-stdint.h m68hc11/m68hc11.h"
- tm_p_file="m68hc11/m68hc11-protos.h"
- md_file="m68hc11/m68hc11.md"
- out_file="m68hc11/m68hc11.c"
- tmake_file="m68hc11/t-m68hc11"
- extra_options="${extra_options} m68hc11/m68hc11.opt"
- use_gcc_stdint=wrap
- ;;
m68k-*-elf* | fido-*-elf*)
case ${target} in
fido-*-elf*)
default_m68k_cpu=68020
default_cf_cpu=5475
tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h m68k/netbsd-elf.h"
+ extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
tm_defines="${tm_defines} MOTOROLA=1"
;;
m68k*-*-openbsd*)
# needed to unconfuse gdb
tm_defines="${tm_defines} OBSD_OLD_GAS"
tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h m68k/openbsd.h"
+ extra_options="${extra_options} openbsd.opt"
tmake_file="t-libc-ok t-openbsd m68k/t-openbsd"
# we need collect2 until our bug is fixed...
use_collect2=yes
;;
-m68k-*-uclinuxoldabi*) # Motorola m68k/ColdFire running uClinux
- # with uClibc, using the original
- # m68k-elf-based ABI
- default_m68k_cpu=68020
- default_cf_cpu=5206
- tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/uclinux-oldabi.h glibc-stdint.h"
- tm_defines="${tm_defines} MOTOROLA=1"
- tmake_file="m68k/t-floatlib m68k/t-uclinux"
- ;;
m68k-*-uclinux*) # Motorola m68k/ColdFire running uClinux
# with uClibc, using the new GNU/Linux-style
# ABI.
default_m68k_cpu=68020
default_cf_cpu=5206
- tm_file="${tm_file} dbxelf.h elfos.h linux.h glibc-stdint.h flat.h m68k/linux.h m68k/uclinux.h ./sysroot-suffix.h"
- tm_defines="${tm_defines} MOTOROLA=1 DEFAULT_LIBC=LIBC_UCLIBC"
- extra_options="${extra_options} linux.opt"
+ tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h flat.h m68k/linux.h m68k/uclinux.h ./sysroot-suffix.h"
+ extra_options="${extra_options} m68k/uclinux.opt"
+ tm_defines="${tm_defines} MOTOROLA=1"
tmake_file="m68k/t-floatlib m68k/t-uclinux m68k/t-mlibs"
;;
m68k-*-linux*) # Motorola m68k's running GNU/Linux
default_m68k_cpu=68020
default_cf_cpu=5475
with_arch=${with_arch:-m68k}
- tm_file="${tm_file} dbxelf.h elfos.h linux.h glibc-stdint.h m68k/linux.h ./sysroot-suffix.h"
+ tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h m68k/linux.h ./sysroot-suffix.h"
extra_options="${extra_options} m68k/ieee.opt"
tm_defines="${tm_defines} MOTOROLA=1"
tmake_file="${tmake_file} m68k/t-floatlib m68k/t-linux m68k/t-mlibs"
tmake_file=mcore/t-mcore
inhibit_libc=true
;;
-mcore-*-pe*)
- tm_file="svr3.h dbxcoff.h newlib-stdint.h ${tm_file} mcore/mcore-pe.h"
- tmake_file=mcore/t-mcore-pe
- inhibit_libc=true
- use_gcc_stdint=wrap
- ;;
mep-*-*)
tm_file="dbxelf.h elfos.h ${tm_file}"
tmake_file=mep/t-mep
use_gcc_stdint=wrap
;;
microblaze*-linux*)
- tm_file="${tm_file} dbxelf.h linux.h microblaze/linux.h"
+ tm_file="${tm_file} dbxelf.h gnu-user.h linux.h microblaze/linux.h"
c_target_objs="${c_target_objs} microblaze-c.o"
cxx_target_objs="${cxx_target_objs} microblaze-c.o"
tmake_file="${tmake_file} t-slibgcc-elf-ver t-slibgcc-nolc-override t-linux microblaze/t-microblaze"
;;
mips-sgi-irix6.5*)
tm_file="elfos.h ${tm_file} mips/iris6.h"
- tmake_file="mips/t-iris mips/t-iris6 mips/t-slibgcc-irix"
- extra_options="${extra_options} rpath.opt"
+ tmake_file="mips/t-irix6 t-slibgcc-dummy"
+ extra_options="${extra_options} rpath.opt mips/iris6.opt"
target_cpu_default="MASK_ABICALLS"
tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_N32"
# Only IRIX Development Foundation 1.3 for IRIX 6.5 provides stdint.h.
mips*-*-netbsd*) # NetBSD/mips, either endian.
target_cpu_default="MASK_ABICALLS"
tm_file="elfos.h ${tm_file} mips/elf.h netbsd.h netbsd-elf.h mips/netbsd.h"
+ extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
;;
mips64*-*-linux* | mipsisa64*-*-linux*)
- tm_file="dbxelf.h elfos.h linux.h glibc-stdint.h ${tm_file} mips/linux.h mips/linux64.h"
+ tm_file="dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ${tm_file} mips/linux.h mips/linux64.h"
tmake_file="${tmake_file} mips/t-linux64 mips/t-libgcc-mips16"
tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_N32"
case ${target} in
test x$with_llsc != x || with_llsc=yes
;;
mips*-*-linux*) # Linux MIPS, either endian.
- tm_file="dbxelf.h elfos.h linux.h glibc-stdint.h ${tm_file} mips/linux.h"
+ tm_file="dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ${tm_file} mips/linux.h"
tmake_file="${tmake_file} mips/t-libgcc-mips16"
case ${target} in
mipsisa32r2*)
tm_defines="${tm_defines} OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_OBJECT OBSD_HAS_CORRECT_SPECS"
target_cpu_default="MASK_ABICALLS"
tm_file="mips/mips.h openbsd.h openbsd-stdint.h openbsd-libpthread.h mips/openbsd.h mips/sdb.h"
+ extra_options="${extra_options} openbsd.opt"
case ${target} in
mips*el-*-openbsd*)
tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=0";;
*-darwin[0-6]*)
;;
esac
- tmake_file="${tmake_file} t-slibgcc-darwin"
+ tmake_file="${tmake_file} t-slibgcc-dummy"
extra_headers=altivec.h
;;
powerpc64-*-darwin*)
extra_options="${extra_options} ${cpu_type}/darwin.opt"
extra_parts="crt2.o"
- tmake_file="${tmake_file} ${cpu_type}/t-darwin64 t-slibgcc-darwin"
+ tmake_file="${tmake_file} ${cpu_type}/t-darwin64 t-slibgcc-dummy"
tm_file="${tm_file} ${cpu_type}/darwin8.h ${cpu_type}/darwin64.h"
extra_headers=altivec.h
;;
-powerpc*-*-freebsd*)
+powerpc-*-freebsd*)
tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} rs6000/sysv4.h rs6000/freebsd.h"
- tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
+ tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm rs6000/t-freebsd"
+ tmake_file="${tmake_file} t-slibgcc-libgcc rs6000/t-fprules-softfp soft-fp/t-softfp"
extra_options="${extra_options} rs6000/sysv4.opt"
;;
powerpc-*-netbsd*)
tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h freebsd-spec.h rs6000/sysv4.h rs6000/netbsd.h"
+ extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
tmake_file="${tmake_file} rs6000/t-netbsd"
extra_options="${extra_options} rs6000/sysv4.opt"
;;
powerpc-*-eabispe*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabispe.h"
+ tm_file="${tm_file} dbxelf.h elfos.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabispe.h"
extra_options="${extra_options} rs6000/sysv4.opt"
tmake_file="rs6000/t-spe rs6000/t-ppccomm"
use_gcc_stdint=wrap
;;
powerpc-*-eabisimaltivec*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h rs6000/eabialtivec.h"
+ tm_file="${tm_file} dbxelf.h elfos.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h rs6000/eabialtivec.h"
extra_options="${extra_options} rs6000/sysv4.opt"
tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcendian rs6000/t-ppccomm"
use_gcc_stdint=wrap
;;
powerpc-*-eabisim*)
- tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h"
+ tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h"
extra_options="${extra_options} rs6000/sysv4.opt"
tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
use_gcc_stdint=wrap
;;
powerpc-*-elf*)
- tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h"
+ tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h"
extra_options="${extra_options} rs6000/sysv4.opt"
tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
;;
powerpc-*-eabialtivec*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabialtivec.h"
+ tm_file="${tm_file} dbxelf.h elfos.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabialtivec.h"
extra_options="${extra_options} rs6000/sysv4.opt"
tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcendian rs6000/t-ppccomm"
use_gcc_stdint=wrap
;;
powerpc-xilinx-eabi*)
- tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/singlefp.h rs6000/xfpu.h rs6000/xilinx.h"
- extra_options="${extra_options} rs6000/sysv4.opt"
+ tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/singlefp.h rs6000/xfpu.h rs6000/xilinx.h"
+ extra_options="${extra_options} rs6000/sysv4.opt rs6000/xilinx.opt"
tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm rs6000/t-xilinx"
use_gcc_stdint=wrap
;;
powerpc-*-eabi*)
- tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h"
+ tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h"
extra_options="${extra_options} rs6000/sysv4.opt"
tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
use_gcc_stdint=wrap
;;
powerpc-*-rtems*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/rtems.h rtems.h"
+ tm_file="${tm_file} dbxelf.h elfos.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/rtems.h rtems.h"
extra_options="${extra_options} rs6000/sysv4.opt"
tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-rtems t-rtems rs6000/t-ppccomm"
;;
powerpc-*-linux* | powerpc64-*-linux*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
+ tm_file="${tm_file} dbxelf.h elfos.h freebsd-spec.h rs6000/sysv4.h"
extra_options="${extra_options} rs6000/sysv4.opt"
tmake_file="t-dfprules rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
maybe_biarch=yes
tm_file="rs6000/secureplt.h ${tm_file}"
fi
;;
-powerpc64-*-gnu*)
- tm_file="${tm_file} elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/default64.h rs6000/linux64.h rs6000/gnu.h glibc-stdint.h"
- extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt"
- tmake_file="t-slibgcc-elf-ver t-slibgcc-libgcc t-gnu"
- ;;
-powerpc-*-gnu-gnualtivec*)
- tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h rs6000/gnu.h glibc-stdint.h"
- extra_options="${extra_options} rs6000/sysv4.opt"
- tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos t-slibgcc-elf-ver t-slibgcc-libgcc t-gnu rs6000/t-ppccomm"
- if test x$enable_threads = xyes; then
- thread_file='posix'
- fi
- ;;
-powerpc-*-gnu*)
- tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/gnu.h glibc-stdint.h"
- tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos t-slibgcc-elf-ver t-slibgcc-libgcc t-gnu rs6000/t-ppccomm"
- extra_options="${extra_options} rs6000/sysv4.opt"
- if test x$enable_threads = xyes; then
- thread_file='posix'
- fi
- ;;
powerpc-wrs-vxworks|powerpc-wrs-vxworksae)
- tm_file="${tm_file} elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
+ tm_file="${tm_file} elfos.h freebsd-spec.h rs6000/sysv4.h"
tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppccomm rs6000/t-vxworks"
extra_options="${extra_options} rs6000/sysv4.opt"
extra_headers=ppc-asm.h
case ${target} in
*-vxworksae*)
- tm_file="${tm_file} vx-common.h vxworksae.h rs6000/vxworks.h rs6000/e500.h rs6000/vxworksae.h"
+ tm_file="${tm_file} vx-common.h vxworksae.h rs6000/vxworks.h rs6000/e500.h"
tmake_file="${tmake_file} rs6000/t-vxworksae"
;;
*-vxworks*)
tmake_file="t-lynx rs6000/t-lynx"
extra_options="${extra_options} rs6000/sysv4.opt lynx.opt"
extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
- extra_options="${extra_options} lynx.opt"
thread_file=lynx
gnu_ld=yes
gas=yes
;;
powerpcle-*-elf*)
- tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h"
+ tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h"
tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
extra_options="${extra_options} rs6000/sysv4.opt"
;;
powerpcle-*-eabisim*)
- tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h"
+ tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h"
tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
extra_options="${extra_options} rs6000/sysv4.opt"
use_gcc_stdint=wrap
;;
powerpcle-*-eabi*)
- tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/e500.h"
+ tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/e500.h"
tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
extra_options="${extra_options} rs6000/sysv4.opt"
use_gcc_stdint=wrap
extra_headers=altivec.h
;;
rx-*-elf*)
- tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file} ../../libgcc/config/rx/rx-abi.h"
+ tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
+ libgcc_tm_file="${libgcc_tm_file} rx/rx-abi.h"
tmake_file="${tmake_file} rx/t-rx"
;;
s390-*-linux*)
- tm_file="s390/s390.h dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h s390/linux.h"
+ tm_file="s390/s390.h dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h s390/linux.h"
;;
s390x-*-linux*)
- tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h s390/linux.h"
+ tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h s390/linux.h"
tm_p_file=s390/s390-protos.h
md_file=s390/s390.md
extra_modes=s390/s390-modes.def
tmake_file="${tmake_file} s390/t-linux64"
;;
s390x-ibm-tpf*)
- tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h s390/tpf.h"
+ tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h s390/tpf.h"
tm_p_file=s390/s390-protos.h
md_file=s390/s390.md
extra_modes=s390/s390-modes.def
extra_options="${extra_options} s390/tpf.opt"
;;
score-*-elf)
+ gas=yes
+ gnu_ld=yes
tm_file="dbxelf.h elfos.h score/elf.h score/score.h newlib-stdint.h"
- tmake_file=score/t-score-elf
- extra_objs="score7.o score3.o"
+ extra_parts="crti.o crtn.o crtbegin.o crtend.o"
+ tmake_file="${tmake_file} score/t-score-elf score/t-score-softfp soft-fp/t-softfp"
;;
sh-*-elf* | sh[12346l]*-*-elf* | \
-sh-*-symbianelf* | sh[12346l]*-*-symbianelf* | \
sh-*-linux* | sh[2346lbe]*-*-linux* | \
sh-*-netbsdelf* | shl*-*-netbsdelf* | sh5-*-netbsd* | sh5l*-*-netbsd* | \
sh64-*-netbsd* | sh64l*-*-netbsd*)
case ${with_endian} in
little*) tm_file="sh/little.h ${tm_file}" ;;
esac
- tm_file="${tm_file} dbxelf.h elfos.h"
- case ${target} in
- sh*-*-netbsd*) ;;
- *) tm_file="${tm_file} svr4.h" ;;
- esac
- tm_file="${tm_file} sh/elf.h"
+ tm_file="${tm_file} dbxelf.h elfos.h sh/elf.h"
case ${target} in
sh*-*-linux*) tmake_file="${tmake_file} sh/t-linux"
- tm_file="${tm_file} linux.h glibc-stdint.h sh/linux.h" ;;
- sh*-*-netbsd*) tm_file="${tm_file} netbsd.h netbsd-elf.h sh/netbsd-elf.h" ;;
+ tm_file="${tm_file} gnu-user.h linux.h glibc-stdint.h sh/linux.h" ;;
+ sh*-*-netbsd*)
+ tm_file="${tm_file} netbsd.h netbsd-elf.h sh/netbsd-elf.h"
+ extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
+
+ ;;
sh*-superh-elf) if test x$with_libgloss != xno; then
with_libgloss=yes
tm_file="${tm_file} sh/newlib.h"
fi
extra_headers="shmedia.h ushmedia.h sshmedia.h"
;;
- *-*-symbianelf*)
- tmake_file="sh/t-symbian"
- tm_file="sh/symbian-pre.h sh/little.h ${tm_file} sh/symbian-post.h"
- c_target_objs="symbian-base.o symbian-c.o"
- cxx_target_objs="symbian-base.o symbian-cxx.o"
- extra_parts="crt1.o crti.o crtn.o crtbegin.o crtend.o crtbeginS.o crtendS.o"
- ;;
*-*-elf*)
tm_file="${tm_file} newlib-stdint.h"
;;
;;
sh-*-rtems*)
tmake_file="sh/t-sh sh/t-elf t-rtems sh/t-rtems"
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h newlib-stdint.h"
+ tm_file="${tm_file} dbxelf.h elfos.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h newlib-stdint.h"
;;
sh-wrs-vxworks)
tmake_file="$tmake_file sh/t-sh sh/t-elf sh/t-vxworks"
- tm_file="${tm_file} elfos.h svr4.h sh/elf.h sh/embed-elf.h vx-common.h vxworks.h sh/vxworks.h"
+ tm_file="${tm_file} elfos.h sh/elf.h sh/embed-elf.h vx-common.h vxworks.h sh/vxworks.h"
;;
sparc-*-elf*)
- tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h svr4.h sparc/sysv4.h sparc/sp-elf.h"
- tmake_file="sparc/t-elf sparc/t-crtfm"
- extra_parts="crti.o crtn.o crtbegin.o crtend.o"
+ tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp-elf.h"
+ case ${target} in
+ *-leon-*)
+ tmake_file="sparc/t-leon"
+ ;;
+ *-leon[3-9]*)
+ tmake_file="sparc/t-leon3"
+ ;;
+ *)
+ tmake_file="sparc/t-elf"
+ ;;
+ esac
;;
sparc-*-rtems*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp-elf.h sparc/rtemself.h rtems.h newlib-stdint.h"
- tmake_file="sparc/t-elf sparc/t-crtfm t-rtems"
- extra_parts="crti.o crtn.o crtbegin.o crtend.o"
+ tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/sp-elf.h sparc/rtemself.h rtems.h newlib-stdint.h"
+ tmake_file="sparc/t-elf t-rtems"
;;
sparc-*-linux*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h linux.h glibc-stdint.h"
+ tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h gnu-user.h linux.h glibc-stdint.h"
extra_options="${extra_options} sparc/long-double-switch.opt"
- tmake_file="${tmake_file} sparc/t-linux"
+ case ${target} in
+ *-leon-*)
+ tmake_file="${tmake_file} sparc/t-leon"
+ ;;
+ *-leon[3-9]*)
+ tmake_file="${tmake_file} sparc/t-leon3"
+ ;;
+ *)
+ tmake_file="${tmake_file} sparc/t-linux"
+ ;;
+ esac
if test x$enable_targets = xall; then
tm_file="sparc/biarch64.h ${tm_file} sparc/linux64.h"
tmake_file="${tmake_file} sparc/t-linux64"
tmake_file="${tmake_file} sparc/t-crtfm"
;;
sparc-*-netbsdelf*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
+ tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
+ extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
extra_options="${extra_options} sparc/long-double-switch.opt"
;;
sparc*-*-solaris2*)
- tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h"
- case ${target} in
- *-*-solaris2.1[0-9]*)
- tm_file="${tm_file} sol2-10.h"
- use_gcc_stdint=wrap
- ;;
- *)
- use_gcc_stdint=provide
- ;;
- esac
- tm_file="${tm_file} sparc/sol2.h"
+ tm_file="sparc/biarch64.h ${tm_file} ${sol2_tm_file} sol2-bi.h"
case ${target} in
sparc64-*-* | sparcv9-*-*)
- tm_file="${tm_file} sparc/sol2-64.h"
+ tm_file="sparc/sol2-64.h ${tm_file}"
;;
*)
test x$with_cpu != x || with_cpu=v9
;;
esac
- tm_file="${tm_file} sparc/sol2-bi.h"
- if test x$gas = xyes; then
- tm_file="${tm_file} sparc/sol2-gas.h sparc/sol2-gas-bi.h"
- fi
- if test x$gnu_ld = xyes; then
- tm_file="${tm_file} sol2-gld.h sparc/sol2-gld-bi.h"
- fi
- tm_file="${tm_file} tm-dwarf2.h"
- tmake_file="t-sol2 sparc/t-sol2 sparc/t-sol2-64 sparc/t-crtfm"
- if test x$gnu_ld = xyes; then
- tmake_file="$tmake_file t-slibgcc-elf-ver"
- else
- tmake_file="$tmake_file t-slibgcc-sld"
- fi
- if test x$gas = xyes; then
- tm_file="usegas.h ${tm_file}"
- fi
- c_target_objs="sol2-c.o"
- cxx_target_objs="sol2-c.o"
- extra_objs="sol2.o"
- tm_p_file="${tm_p_file} sol2-protos.h"
- extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
- case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
- "":yes:* | yes:yes:* )
- thread_file=posix
- ;;
- "":*:yes | yes:*:yes )
- thread_file=solaris
- ;;
- esac
+ tmake_file="${tmake_file} sparc/t-sol2-64"
;;
sparc-wrs-vxworks)
- tm_file="${tm_file} elfos.h svr4.h sparc/sysv4.h vx-common.h vxworks.h sparc/vxworks.h"
+ tm_file="${tm_file} elfos.h sparc/sysv4.h vx-common.h vxworks.h sparc/vxworks.h"
tmake_file="${tmake_file} sparc/t-vxworks"
;;
sparc64-*-elf*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h newlib-stdint.h sparc/sysv4.h sparc/sp64-elf.h"
+ tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp64-elf.h"
extra_options="${extra_options} sparc/little-endian.opt"
- tmake_file="${tmake_file} sparc/t-crtfm"
- extra_parts="crtbegin.o crtend.o"
;;
sparc64-*-rtems*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h newlib-stdint.h sparc/sysv4.h sparc/sp64-elf.h sparc/rtemself.h rtems.h"
+ tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp64-elf.h sparc/rtemself.h rtems.h"
extra_options="${extra_options} sparc/little-endian.opt"
- tmake_file="${tmake_file} sparc/t-crtfm t-rtems"
- extra_parts="crtbegin.o crtend.o"
+ tmake_file="${tmake_file} t-rtems"
;;
sparc64-*-linux*)
- tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h linux.h glibc-stdint.h sparc/linux64.h"
+ tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h sparc/sysv4.h gnu-user.h linux.h glibc-stdint.h sparc/linux64.h"
extra_options="${extra_options} sparc/long-double-switch.opt"
tmake_file="${tmake_file} sparc/t-linux sparc/t-linux64 sparc/t-crtfm"
;;
;;
sparc64-*-netbsd*)
tm_file="sparc/biarch64.h ${tm_file}"
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
+ tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
+ extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
extra_options="${extra_options} sparc/long-double-switch.opt"
tmake_file="${tmake_file} sparc/t-netbsd64"
;;
sparc64-*-openbsd*)
- tm_file="sparc/openbsd1-64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h"
+ tm_file="sparc/openbsd1-64.h ${tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/sp64-elf.h"
tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h sparc/openbsd64.h"
+ extra_options="${extra_options} openbsd.opt"
extra_options="${extra_options} sparc/little-endian.opt"
gas=yes gnu_ld=yes
with_cpu=ultrasparc
c_target_objs="${c_target_objs} spu-c.o"
cxx_target_objs="${cxx_target_objs} spu-c.o"
;;
-v850e1-*-*)
- target_cpu_default="TARGET_CPU_v850e1"
- tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h v850/v850.h"
- tm_p_file=v850/v850-protos.h
- tmake_file=v850/t-v850e
- md_file=v850/v850.md
- extra_modes=v850/v850-modes.def
- out_file=v850/v850.c
- extra_options="${extra_options} v850/v850.opt"
- if test x$stabs = xyes
- then
- tm_file="${tm_file} dbx.h"
- fi
- use_collect2=no
- c_target_objs="v850-c.o"
- cxx_target_objs="v850-c.o"
- use_gcc_stdint=wrap
- ;;
-v850e-*-*)
- target_cpu_default="TARGET_CPU_v850e"
- tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h v850/v850.h"
- tm_p_file=v850/v850-protos.h
- tmake_file=v850/t-v850e
- md_file=v850/v850.md
- extra_modes=v850/v850-modes.def
- out_file=v850/v850.c
- extra_options="${extra_options} v850/v850.opt"
- if test x$stabs = xyes
- then
- tm_file="${tm_file} dbx.h"
- fi
- use_collect2=no
- c_target_objs="v850-c.o"
- cxx_target_objs="v850-c.o"
- use_gcc_stdint=wrap
- ;;
-v850-*-*)
- target_cpu_default="TARGET_CPU_generic"
- tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file}"
- tmake_file=v850/t-v850
+
+v850*-*-*)
+ case ${target} in
+ v850e2v3-*-*)
+ target_cpu_default="TARGET_CPU_v850e2v3"
+ ;;
+ v850e2-*-*)
+ target_cpu_default="TARGET_CPU_v850e2"
+ ;;
+ v850e1-*-* | v850es-*-*)
+ target_cpu_default="TARGET_CPU_v850e1"
+ ;;
+ v850e-*-*)
+ target_cpu_default="TARGET_CPU_v850e"
+ ;;
+ v850-*-*)
+ target_cpu_default="TARGET_CPU_generic"
+ ;;
+ esac
+ tm_file="dbxelf.h elfos.h newlib-stdint.h v850/v850.h"
if test x$stabs = xyes
then
tm_file="${tm_file} dbx.h"
use_gcc_stdint=wrap
;;
vax-*-linux*)
- tm_file="${tm_file} dbxelf.h elfos.h linux.h vax/elf.h vax/linux.h"
+ tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h vax/elf.h vax/linux.h"
+ extra_options="${extra_options} vax/elf.opt"
tmake_file="${tmake_file} vax/t-linux"
;;
vax-*-netbsdelf*)
tm_file="${tm_file} elfos.h netbsd.h netbsd-elf.h vax/elf.h vax/netbsd-elf.h"
- ;;
-vax-*-netbsd*)
- tm_file="${tm_file} netbsd.h netbsd-aout.h vax/netbsd.h"
- tmake_file=t-netbsd
- extra_parts=""
- use_collect2=yes
+ extra_options="${extra_options} netbsd.opt netbsd-elf.opt vax/elf.opt"
;;
vax-*-openbsd*)
tm_file="vax/vax.h vax/openbsd1.h openbsd.h openbsd-stdint.h openbsd-pthread.h vax/openbsd.h"
+ extra_options="${extra_options} openbsd.opt"
use_collect2=yes
;;
xstormy16-*-elf)
# For historical reasons, the target files omit the 'x'.
- tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h stormy16/stormy16.h"
+ tm_file="dbxelf.h elfos.h newlib-stdint.h stormy16/stormy16.h"
tm_p_file=stormy16/stormy16-protos.h
md_file=stormy16/stormy16.md
out_file=stormy16/stormy16.c
extra_parts="crtbegin.o crtend.o"
;;
xtensa*-*-elf*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h newlib-stdint.h xtensa/elf.h"
+ tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h xtensa/elf.h"
+ extra_options="${extra_options} xtensa/elf.opt"
tmake_file="xtensa/t-xtensa xtensa/t-elf"
;;
xtensa*-*-linux*)
- tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h xtensa/linux.h"
+ tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h xtensa/linux.h"
tmake_file="${tmake_file} xtensa/t-xtensa xtensa/t-linux"
;;
am33_2.0-*-linux*)
- tm_file="mn10300/mn10300.h dbxelf.h elfos.h linux.h glibc-stdint.h mn10300/linux.h"
+ tm_file="mn10300/mn10300.h dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h mn10300/linux.h"
tmake_file="${tmake_file} mn10300/t-linux"
gas=yes gnu_ld=yes
extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
use_collect2=no
;;
m32c-*-rtems*)
- tm_file="dbxelf.h elfos.h svr4.h ${tm_file} m32c/rtems.h rtems.h newlib-stdint.h"
+ tm_file="dbxelf.h elfos.h ${tm_file} m32c/rtems.h rtems.h newlib-stdint.h"
tmake_file="${tmake_file} t-rtems"
c_target_objs="m32c-pragma.o"
cxx_target_objs="m32c-pragma.o"
;;
m32c-*-elf*)
- tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file}"
+ tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
c_target_objs="m32c-pragma.o"
cxx_target_objs="m32c-pragma.o"
;;
tm_file="${tm_file} rs6000/option-defaults.h"
esac
+if [ "$target_has_targetcm" = "no" ]; then
+ c_target_objs="$c_target_objs default-c.o"
+ cxx_target_objs="$cxx_target_objs default-c.o"
+fi
+
+if [ "$common_out_file" = "" ]; then
+ if [ "$target_has_targetm_common" = "yes" ]; then
+ common_out_file="$cpu_type/$cpu_type-common.c"
+ else
+ common_out_file="default-common.c"
+ fi
+fi
+
# Support for --with-cpu and related options (and a few unrelated options,
# too).
case ${with_cpu} in
arch_without_sse2=no
arch_without_64bit=no
case ${target} in
+ i386-*-freebsd*)
+ if test $fbsd_major -ge 6; then
+ arch=i486
+ else
+ arch=i386
+ fi
+ cpu=generic
+ arch_without_sse2=yes
+ arch_without_64bit=yes
+ ;;
i386-*-*)
arch=i386
cpu=i386
arch=bdver1
cpu=bdver1
;;
+ btver1-*)
+ arch=btver1
+ cpu=btver1
+ ;;
amdfam10-*|barcelona-*)
arch=amdfam10
cpu=amdfam10
arch=bdver1
cpu=bdver1
;;
+ btver1-*)
+ arch=btver1
+ cpu=btver1
+ ;;
amdfam10-*|barcelona-*)
arch=amdfam10
cpu=amdfam10
mips*-*-vxworks)
with_arch=mips2
;;
+ sparc-leon*-*)
+ with_cpu=v8;
+ ;;
sparc*-*-*)
with_cpu="`echo ${target} | sed 's/-.*$//'`"
;;
;;
arm*-*-*)
- supported_defaults="arch cpu float tune fpu abi mode"
+ supported_defaults="arch cpu float tune fpu abi mode tls"
for which in cpu tune; do
# See if it matches any of the entries in arm-cores.def
eval "val=\$with_$which"
;;
esac
+ case "$with_tls" in
+ "" \
+ | gnu | gnu2)
+ # OK
+ ;;
+ *)
+ echo "Unknown TLS method used in --with-tls=$with_tls" 1>&2
+ exit 1
+ ;;
+ esac
+
if test "x$with_arch" != x && test "x$with_cpu" != x; then
echo "Warning: --with-arch overrides --with-cpu=$with_cpu" 1>&2
fi
;;
"" | x86-64 | generic | native \
| k8 | k8-sse3 | athlon64 | athlon64-sse3 | opteron \
- | opteron-sse3 | athlon-fx | bdver1 | amdfam10 \
+ | opteron-sse3 | athlon-fx | bdver1 | btver1 | amdfam10 \
| barcelona | nocona | core2 | corei7 | corei7-avx | atom)
# OK
;;
for which in cpu tune; do
eval "val=\$with_$which"
case ${val} in
- "" | sparc | sparcv9 | sparc64 | sparc86x \
- | v7 | cypress | v8 | supersparc | sparclite | f930 \
- | f934 | hypersparc | sparclite86x | sparclet | tsc701 \
+ "" | sparc | sparcv9 | sparc64 \
+ | v7 | cypress \
+ | v8 | supersparc | hypersparc | leon \
+ | sparclite | f930 | f934 | sparclite86x \
+ | sparclet | tsc701 \
| v9 | ultrasparc | ultrasparc3 | niagara | niagara2)
# OK
;;
v850*-*-*)
supported_defaults=cpu
case ${with_cpu} in
- "" | v850e | v850e1)
+ "" | v850e | v850e1 | v850e2 | v850es | v850e2v3)
# OK
;;
*)
fido*-*-* | m68k*-*-*)
target_cpu_default2=$m68k_cpu_ident
+ tmake_file="m68k/t-opts $tmake_file"
if [ x"$m68k_arch_family" != x ]; then
tmake_file="m68k/t-$m68k_arch_family $tmake_file"
fi
i[34567]86-*-gnu*)
tmake_file="${tmake_file} i386/t-fprules-softfp soft-fp/t-softfp i386/t-linux"
;;
- i[34567]86-*-solaris2*)
+ i[34567]86-*-solaris2* | x86_64-*-solaris2.1[0-9]*)
tmake_file="${tmake_file} i386/t-fprules-softfp soft-fp/t-softfp"
;;
i[34567]86-*-cygwin* | i[34567]86-*-mingw* | x86_64-*-mingw*)
tm_defines="TARGET_ENDIAN_DEFAULT=0 $tm_defines"
;;
esac
- if test "x$enable_gofast" = xyes
- then
- tm_defines="US_SOFTWARE_GOFAST $tm_defines"
- tmake_file="mips/t-gofast $tmake_file"
- else
- tmake_file="mips/t-mips $tmake_file"
- fi
+ tmake_file="mips/t-mips $tmake_file"
;;
powerpc*-*-* | rs6000-*-*)
cxx_target_objs="${cxx_target_objs} sh-c.o"
;;
+ sparc-leon*-*)
+ if test x$with_tune = x ; then
+ with_tune=leon;
+ fi
+
+ # The SPARC port checks this value at compile-time.
+ target_cpu_default2="TARGET_CPU_$with_cpu"
+ ;;
+
sparc*-*-*)
# Some standard aliases.
case x$with_cpu in
# The SPARC port checks this value at compile-time.
target_cpu_default2="TARGET_CPU_$with_cpu"
;;
+
v850*-*-*)
- # FIXME: The v850 is "special" in that it does not support
- # runtime CPU selection, only --with-cpu.
case "x$with_cpu" in
x)
;;
- xv850e)
+ xv850e | xv850e1 | xv850e2 | xv850e2v3)
target_cpu_default2="TARGET_CPU_$with_cpu"
;;
+ xv850es)
+ target_cpu_default2="TARGET_CPU_v850e1"
+ ;;
esac
;;
esac
t=
-all_defaults="abi cpu cpu_32 cpu_64 arch arch_32 arch_64 tune tune_32 tune_64 schedule float mode fpu divide llsc mips-plt synci"
+all_defaults="abi cpu cpu_32 cpu_64 arch arch_32 arch_64 tune tune_32 tune_64 schedule float mode fpu divide llsc mips-plt synci tls"
for option in $all_defaults
do
eval "val=\$with_"`echo $option | sed s/-/_/g`
OSDN Git Service
