1 # GCC target-specific configuration file.
2 # Copyright 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007,
3 # 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
5 #This file is part of GCC.
7 #GCC is free software; you can redistribute it and/or modify it under
8 #the terms of the GNU General Public License as published by the Free
9 #Software Foundation; either version 3, or (at your option) any later
12 #GCC is distributed in the hope that it will be useful, but WITHOUT
13 #ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 #FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
17 #You should have received a copy of the GNU General Public License
18 #along with GCC; see the file COPYING3. If not see
19 #<http://www.gnu.org/licenses/>.
21 # This is the GCC target-specific configuration file
22 # where a configuration type is mapped to different system-specific
23 # definitions and files. This is invoked by the autoconf-generated
24 # configure script. Putting it in a separate shell file lets us skip
25 # running autoconf when modifying target-specific information.
27 # When you change the cases in the OS or target switches, consider
28 # updating ../libgcc/config.host also.
30 # This file switches on the shell variable ${target}, and also uses the
31 # following shell variables:
33 # with_* Various variables as set by configure.
35 # enable_threads Either the name, yes or no depending on whether
36 # threads support was requested.
38 # default_use_cxa_atexit
39 # The default value for the $enable___cxa_atexit
40 # variable. enable___cxa_atexit needs to be set to
41 # "yes" for the correct operation of C++ destructors
42 # but it relies upon the presence of a non-standard C
43 # library function called __cxa_atexit.
44 # Since not all C libraries provide __cxa_atexit the
45 # default value of $default_use_cxa_atexit is set to
46 # "no" except for targets which are known to be OK.
48 # default_gnu_indirect_function
49 # The default value for the $enable_gnu_indirect_function
50 # variable. enable_gnu_indirect_function relies
51 # upon the presence of a non-standard gnu ifunc support
52 # in the assembler, linker and dynamic linker.
53 # Since not all libraries provide the dynamic linking
54 # support, the default value of
55 # $default_gnu_indirect_function is set to
56 # "no" except for targets which are known to be OK.
58 # gas_flag Either yes or no depending on whether GNU as was
61 # gnu_ld_flag Either yes or no depending on whether GNU ld was
64 # This file sets the following shell variables for use by the
65 # autoconf-generated configure script:
67 # cpu_type The name of the cpu, if different from the first
68 # chunk of the canonical target name.
70 # tm_defines List of target macros to define for all compilations.
72 # tm_file A list of target macro files, if different from
73 # "$cpu_type/$cpu_type.h". Usually it's constructed
74 # per target in a way like this:
75 # tm_file="${tm_file} dbxelf.h elfos.h ${cpu_type.h}/elf.h"
76 # Note that the preferred order is:
77 # - specific target header "${cpu_type}/${cpu_type.h}"
78 # - generic headers like dbxelf.h elfos.h, etc.
79 # - specializing target headers like ${cpu_type.h}/elf.h
80 # This helps to keep OS specific stuff out of the CPU
81 # defining header ${cpu_type}/${cpu_type.h}.
83 # It is possible to include automatically-generated
84 # build-directory files by prefixing them with "./".
85 # All other files should relative to $srcdir/config.
87 # libgcc_tm_file A list of target macro files used only for code
88 # built for the target, not the host. These files
89 # are relative to $srcdir/../libgcc/config and
90 # must not have the same names as files in
93 # tm_p_file Location of file with declarations for functions
96 # out_file The name of the machine description C support
97 # file, if different from "$cpu_type/$cpu_type.c".
99 # common_out_file The name of the source file for code shared between
100 # the compiler proper and the driver.
102 # md_file The name of the machine-description file, if
103 # different from "$cpu_type/$cpu_type.md".
105 # tmake_file A list of machine-description-specific
106 # makefile-fragments, if different from
107 # "$cpu_type/t-$cpu_type".
109 # extra_modes The name of the file containing a list of extra
110 # machine modes, if necessary and different from
111 # "$cpu_type/$cpu_type-modes.def".
113 # extra_objs List of extra objects that should be linked into
114 # the compiler proper (cc1, cc1obj, cc1plus)
115 # depending on target.
117 # extra_gcc_objs List of extra objects that should be linked into
118 # the compiler driver (gcc) depending on target.
120 # extra_headers List of used header files from the directory
121 # config/${cpu_type}.
123 # user_headers_inc_next_pre
124 # List of header file names of internal gcc header
125 # files, which should be prefixed by an include_next.
126 # user_headers_inc_next_post
127 # List of header file names of internal gcc header
128 # files, which should be postfixed by an include_next.
129 # use_gcc_tgmath If set, add tgmath.h to the list of used header
132 # use_gcc_stdint If "wrap", install a version of stdint.h that
133 # wraps the system's copy for hosted compilations;
134 # if "provide", provide a version of systems without
135 # such a system header; otherwise "none", do not
136 # provide such a header at all.
138 # extra_passes List of extra executables compiled for this target
139 # machine, used for compiling from source to object.
141 # extra_parts List of extra object files that should be compiled
142 # for this target machine.
144 # extra_programs Like extra_passes, but these are used when linking.
146 # extra_options List of target-dependent .opt files.
148 # c_target_objs List of extra target-dependent objects that be
149 # linked into the C compiler only.
151 # cxx_target_objs List of extra target-dependent objects that be
152 # linked into the C++ compiler only.
154 # fortran_target_objs List of extra target-dependent objects that be
155 # linked into the fortran compiler only.
157 # target_gtfiles List of extra source files with type information.
159 # xm_defines List of macros to define when compiling for the
162 # xm_file List of files to include when compiling for the
165 # use_collect2 Set to yes or no, depending on whether collect2
168 # target_cpu_default Set to override the default target model.
170 # gdb_needs_out_file_path
171 # Set to yes if gdb needs a dir command with
172 # `dirname $out_file`.
174 # thread_file Set to control which thread package to use.
176 # gas Set to yes or no depending on whether the target
177 # system normally uses GNU as.
179 # need_64bit_hwint Set to yes if HOST_WIDE_INT must be 64 bits wide
180 # for this target. This is true if this target
181 # supports "long" or "wchar_t" wider than 32 bits,
182 # or BITS_PER_WORD is wider than 32 bits.
183 # The setting made here must match the one made in
184 # other locations such as libcpp/configure.ac
186 # configure_default_options
187 # Set to an initializer for configure_default_options
188 # in configargs.h, based on --with-cpu et cetera.
190 # The following variables are used in each case-construct to build up the
191 # outgoing variables:
193 # gnu_ld Set to yes or no depending on whether the target
194 # system normally uses GNU ld.
196 # target_has_targetcm Set to yes or no depending on whether the target
197 # has its own definition of targetcm.
199 # target_has_targetm_common Set to yes or no depending on whether the
200 # target has its own definition of targetm_common.
206 user_headers_inc_next_pre=
207 user_headers_inc_next_post=
219 target_has_targetcm=no
220 target_has_targetm_common=yes
224 # Set this to force installation and use of collect2.
226 # Set this to override the default target model.
228 # Set this if gdb needs a dir command with `dirname $out_file`
229 gdb_needs_out_file_path=
230 # Set this to control which thread package will be used.
232 # Reinitialize these from the flag values every loop pass, since some
233 # configure entries modify them.
235 gnu_ld="$gnu_ld_flag"
236 default_use_cxa_atexit=no
237 default_gnu_indirect_function=no
242 # Don't carry these over build->host->target. Please.
246 # Obsolete configurations.
249 | i[34567]86-*-interix3* \
255 if test "x$enable_obsolete" != xyes; then
256 echo "*** Configuration ${target} is obsolete." >&2
257 echo "*** Specify --enable-obsolete to build it anyway." >&2
258 echo "*** Support will be REMOVED in the next major release of GCC," >&2
259 echo "*** unless a maintainer comes forward." >&2
264 # Unsupported targets list. Do not put an entry in this list unless
265 # it would otherwise be caught by a more permissive pattern. The list
266 # should be in alphabetical order.
269 | i[34567]86-*-go32* \
270 | m68k-*-uclinuxoldabi* \
271 | mips64orion*-*-rtems* \
273 | sparc-hal-solaris2* \
275 | *-*-freebsd[12] | *-*-freebsd[12].* \
276 | *-*-freebsd*aout* \
283 | *-*-solaris2.[0-7] \
284 | *-*-solaris2.[0-7].* \
288 echo "*** Configuration ${target} not supported" 1>&2
293 # Set default cpu_type, tm_file, tm_p_file and xm_file so it can be
294 # updated in each machine entry. Also set default extra_headers for some
297 cpu_type=`echo ${target} | sed 's/-.*$//'`
302 tmake_file=m32c/t-m32c
303 target_has_targetm_common=no
308 extra_options="${extra_options} g.opt"
315 extra_headers="mmintrin.h arm_neon.h"
316 c_target_objs="arm-c.o"
317 cxx_target_objs="arm-c.o"
318 extra_options="${extra_options} arm/arm-tables.opt"
322 c_target_objs="avr-c.o"
323 cxx_target_objs="avr-c.o"
324 extra_options="${extra_options} avr/avr-tables.opt"
333 extra_options="${extra_options} g.opt"
335 moxie*) cpu_type=moxie
336 target_has_targetm_common=no
340 extra_headers=math-68881.h
341 extra_options="${extra_options} m68k/m68k-tables.opt"
345 c_target_objs="i386-c.o"
346 cxx_target_objs="i386-c.o"
347 extra_options="${extra_options} fused-madd.opt"
348 extra_headers="cpuid.h mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
349 pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h
350 nmmintrin.h bmmintrin.h fma4intrin.h wmmintrin.h
351 immintrin.h x86intrin.h avxintrin.h xopintrin.h
352 ia32intrin.h cross-stdarg.h lwpintrin.h popcntintrin.h
353 abmintrin.h bmiintrin.h tbmintrin.h"
357 c_target_objs="i386-c.o"
358 cxx_target_objs="i386-c.o"
359 extra_options="${extra_options} fused-madd.opt"
360 extra_headers="cpuid.h mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
361 pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h
362 nmmintrin.h bmmintrin.h fma4intrin.h wmmintrin.h
363 immintrin.h x86intrin.h avxintrin.h xopintrin.h
364 ia32intrin.h cross-stdarg.h lwpintrin.h popcntintrin.h
365 abmintrin.h bmiintrin.h tbmintrin.h"
369 extra_headers=ia64intrin.h
371 extra_options="${extra_options} g.opt fused-madd.opt"
377 extra_options="${extra_options} g.opt"
381 extra_options="${extra_options} g.opt"
384 extra_headers=math-68881.h
385 extra_options="${extra_options} m68k/m68k-tables.opt"
389 extra_options="${extra_options} g.opt"
394 extra_headers="loongson.h"
395 extra_options="${extra_options} g.opt mips/mips-tables.opt"
402 extra_headers="ppc-asm.h altivec.h spe.h ppu_intrinsics.h paired.h spu2vmx.h vec_types.h si2vmx.h"
405 xpowerpc64|xdefault64|x6[23]0|x970|xG5|xpower[34567]|xpower6x|xrs64a|xcell|xa2|xe500mc64)
409 extra_options="${extra_options} g.opt fused-madd.opt rs6000/rs6000-tables.opt"
413 extra_options="${extra_options} g.opt fused-madd.opt rs6000/rs6000-tables.opt"
417 extra_options="${extra_options} g.opt"
430 extra_options="${extra_options} fused-madd.opt"
432 # Note the 'l'; we need to be able to match e.g. "shle" or "shl".
433 sh[123456789lbe]*-*-* | sh-*-*)
441 extra_options="${extra_options} fused-madd.opt"
445 tm_file=${cpu_type}/${cpu_type}.h
446 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-protos.h
448 tm_p_file=${cpu_type}/${cpu_type}-protos.h
451 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-modes.def
453 extra_modes=${cpu_type}/${cpu_type}-modes.def
455 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}.opt
457 extra_options="${extra_options} ${cpu_type}/${cpu_type}.opt"
462 if test "x$enable_cld" = xyes; then
463 tm_defines="${tm_defines} USE_IX86_CLD=1"
465 if test "x$enable_frame_pointer" = xyes; then
466 tm_defines="${tm_defines} USE_IX86_FRAME_POINTER=1"
468 tm_file="vxworks-dummy.h ${tm_file}"
471 tm_file="i386/biarch64.h ${tm_file}"
472 if test "x$enable_cld" = xyes; then
473 tm_defines="${tm_defines} USE_IX86_CLD=1"
475 if test "x$enable_frame_pointer" = xyes; then
476 tm_defines="${tm_defines} USE_IX86_FRAME_POINTER=1"
478 tm_file="vxworks-dummy.h ${tm_file}"
482 # On a.out targets, we need to use collect2.
489 # Common C libraries.
490 tm_defines="$tm_defines LIBC_GLIBC=1 LIBC_UCLIBC=2 LIBC_BIONIC=3"
492 # Common parts for widely ported systems.
495 tmake_file="t-darwin ${cpu_type}/t-darwin"
496 tm_file="${tm_file} darwin.h"
499 tm_file="${tm_file} darwin9.h"
501 *-*-darwin[12][0-9]*)
502 tm_file="${tm_file} darwin9.h darwin10.h"
505 tm_file="${tm_file} ${cpu_type}/darwin.h"
506 tm_p_file="${tm_p_file} darwin-protos.h"
507 target_gtfiles="\$(srcdir)/config/darwin.c"
508 extra_options="${extra_options} darwin.opt"
509 c_target_objs="${c_target_objs} darwin-c.o"
510 cxx_target_objs="${cxx_target_objs} darwin-c.o"
511 fortran_target_objs="darwin-f.o"
512 target_has_targetcm=yes
513 extra_objs="darwin.o"
514 extra_gcc_objs="darwin-driver.o"
515 default_use_cxa_atexit=yes
517 case ${enable_threads} in
518 "" | yes | posix) thread_file='posix' ;;
522 # This is the generic ELF configuration of FreeBSD. Later
523 # machine-specific sections may refine and add to this
526 # Due to tm_file entry ordering issues that vary between cpu
527 # architectures, we only define fbsd_tm_file to allow the
528 # machine-specific section to dictate the final order of all
529 # entries of tm_file with the minor exception that components
530 # of the tm_file set here will always be of the form:
532 # freebsd<version_number>.h [freebsd-<conf_option>.h ...] freebsd-spec.h freebsd.h
534 # The machine-specific section should not tamper with this
535 # ordering but may order all other entries of tm_file as it
536 # pleases around the provided core setting.
539 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
540 fbsd_major=`echo ${target} | sed -e 's/.*freebsd//g' | sed -e 's/\..*//g'`
541 tm_defines="${tm_defines} FBSD_MAJOR=${fbsd_major}"
542 tmake_file="t-slibgcc-elf-ver t-freebsd"
543 case ${enable_threads} in
545 fbsd_tm_file="${fbsd_tm_file} freebsd-nthr.h"
549 tmake_file="${tmake_file} t-freebsd-thread"
550 # Before 5.0, FreeBSD can't bind shared libraries to -lc
551 # when "optionally" threaded via weak pthread_* checks.
553 *-*-freebsd[34] | *-*-freebsd[34].*)
554 tmake_file="${tmake_file} t-slibgcc-nolc-override"
559 echo 'Unknown thread configuration for FreeBSD'
563 fbsd_tm_file="${fbsd_tm_file} freebsd-spec.h freebsd.h freebsd-stdint.h"
564 extra_options="$extra_options rpath.opt freebsd.opt"
569 default_use_cxa_atexit=yes;;
571 # need_64bit_hwint=yes # system compiler has this for all arch!
574 *-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu | *-*-gnu* | *-*-kopensolaris*-gnu)
575 extra_options="$extra_options gnu-user.opt"
576 extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
579 case ${enable_threads} in
580 "" | yes | posix) thread_file='posix' ;;
582 tmake_file="t-slibgcc-elf-ver t-linux"
584 *-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu | *-*-kopensolaris*-gnu)
587 tmake_file="$tmake_file t-gnu";;
589 # glibc / uclibc / bionic switch.
590 # uclibc and bionic aren't usable for GNU/Hurd and neither for GNU/k*BSD.
593 extra_options="$extra_options linux.opt";;
597 tm_defines="$tm_defines DEFAULT_LIBC=LIBC_BIONIC"
600 tm_defines="$tm_defines DEFAULT_LIBC=LIBC_UCLIBC"
603 tm_defines="$tm_defines DEFAULT_LIBC=LIBC_GLIBC"
606 # Assume that glibc or uClibc or Bionic are being used and so __cxa_atexit
608 default_use_cxa_atexit=yes
611 # Add Android userspace support to Linux targets.
614 tm_file="$tm_file linux-android.h"
615 extra_options="$extra_options linux-android.opt"
618 # Enable compilation for Android by default for *android* targets.
621 tm_defines="$tm_defines ANDROID_DEFAULT=1"
624 tm_defines="$tm_defines ANDROID_DEFAULT=0"
629 tmake_file="t-slibgcc-elf-ver t-libc-ok t-netbsd t-libgcc-pic"
633 # NetBSD 2.0 and later get POSIX threads enabled by default.
634 # Allow them to be explicitly enabled on any other version.
635 case ${enable_threads} in
638 *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
640 tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
646 tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
650 # NetBSD 1.7 and later are set up to use GCC's crtstuff for
651 # ELF configurations. We will clear extra_parts in the
652 # a.out configurations.
654 *-*-netbsd*1.[7-9]* | *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
655 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
659 # NetBSD 2.0 and later provide __cxa_atexit(), which we use by
660 # default (unless overridden by --disable-__cxa_atexit).
662 *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
663 default_use_cxa_atexit=yes
668 tmake_file="t-libc-ok t-openbsd t-libgcc-pic"
669 case ${enable_threads} in
672 tmake_file="${tmake_file} t-openbsd-thread"
676 *-*-openbsd2.*|*-*-openbsd3.[012])
677 tm_defines="${tm_defines} HAS_LIBC_R=1" ;;
681 case ${enable_threads} in
682 yes) thread_file='rtems' ;;
684 extra_options="${extra_options} rtems.opt"
688 extra_options="$extra_options gnu-user.opt"
690 tm_defines="$tm_defines DEFAULT_LIBC=LIBC_UCLIBC SINGLE_LIBC"
693 # i?86-*-solaris2* needs to insert headers between cpu default and
694 # Solaris 2 specific ones.
695 sol2_tm_file="dbxelf.h elfos.h ${cpu_type}/sysv4.h sol2.h ${cpu_type}/sol2.h"
697 *-*-solaris2.1[0-9]*)
698 sol2_tm_file="${sol2_tm_file} sol2-10.h"
702 use_gcc_stdint=provide
705 if test x$gnu_ld = xyes; then
706 tm_file="usegld.h ${tm_file}"
708 if test x$gas = xyes; then
709 tm_file="usegas.h ${tm_file}"
711 tm_p_file="${tm_p_file} sol2-protos.h"
712 tmake_file="${tmake_file} t-sol2 t-slibgcc-dummy"
713 c_target_objs="${c_target_objs} sol2-c.o"
714 cxx_target_objs="${cxx_target_objs} sol2-c.o"
716 extra_options="${extra_options} sol2.opt"
717 case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
718 "":yes:* | yes:yes:* )
724 extra_options="${extra_options} vms/vms.opt"
726 tmake_file="vms/t-vms"
728 target_gtfiles="$target_gtfiles \$(srcdir)/config/vms/vms.c"
729 tm_p_file="${tm_p_file} vms/vms-protos.h"
730 if test x$gnu_ld != xyes; then
731 # Build wrappers for native case.
732 extra_programs="ld\$(exeext) ar\$(exeext)"
733 tmake_file="$tmake_file vms/t-vmsnative"
739 extra_options="${extra_options} vxworks.opt"
741 case ${enable_threads} in
743 "" | yes | vxworks) thread_file='vxworks' ;;
744 *) echo 'Unknown thread configuration for VxWorks'; exit 1 ;;
748 # Assume that newlib is being used and so __cxa_atexit is provided.
749 default_use_cxa_atexit=yes
755 # Support site-specific machine types.
757 rest=`echo ${target} | sed -e "s/$cpu_type-//"`
758 tm_file=${cpu_type}/$rest.h
759 if test -f $srcdir/config/${cpu_type}/xm-$rest.h
760 then xm_file=${cpu_type}/xm-$rest.h
762 if test -f $srcdir/config/${cpu_type}/t-$rest
763 then tmake_file=${cpu_type}/t-$rest
767 tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h glibc-stdint.h"
768 extra_options="${extra_options} alpha/elf.opt"
769 target_cpu_default="MASK_GAS"
770 tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee alpha/t-linux"
773 tm_file="${tm_file} ${fbsd_tm_file} alpha/elf.h alpha/freebsd.h"
774 extra_options="${extra_options} alpha/elf.opt"
775 target_cpu_default="MASK_GAS"
776 tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
777 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
780 tm_file="${tm_file} netbsd.h alpha/elf.h netbsd-elf.h alpha/netbsd.h"
781 extra_options="${extra_options} netbsd.opt netbsd-elf.opt \
783 target_cpu_default="MASK_GAS"
784 tmake_file="${tmake_file} alpha/t-alpha alpha/t-ieee"
787 tm_defines="${tm_defines} OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_FUNCTION_SIZE OBSD_HAS_DECLARE_OBJECT"
788 tm_file="alpha/alpha.h alpha/elf.h openbsd.h openbsd-stdint.h alpha/openbsd.h openbsd-libpthread.h"
789 extra_options="${extra_options} openbsd.opt alpha/elf.opt"
790 # default x-alpha is only appropriate for dec-osf.
791 target_cpu_default="MASK_GAS"
792 tmake_file="${tmake_file} alpha/t-alpha alpha/t-ieee"
795 if test x$stabs = xyes
797 tm_file="${tm_file} dbx.h"
799 # mips-tfile and mips-tdump are only used with the native assembler
800 # and require the Tru64 UNIX <a.out.h>, so only build native.
801 if test x$gas != xyes && test x${host} = x${target}
803 extra_passes="mips-tfile mips-tdump"
806 tmake_file="t-slibgcc-dummy"
807 tm_file="${tm_file} alpha/osf5.h"
808 tm_defines="${tm_defines} TARGET_SUPPORT_ARCH=1"
809 extra_options="${extra_options} rpath.opt alpha/osf5.opt"
810 extra_headers=va_list.h
811 use_gcc_stdint=provide
812 case ${enable_threads} in
819 tm_file="${tm_file} alpha/vms.h alpha/vms64.h"
820 xm_file="alpha/xm-vms.h vms/xm-vms64.h"
821 tmake_file="${tmake_file} alpha/t-alpha vms/t-vms64 alpha/t-vms alpha/t-ieee"
824 tm_file="${tm_file} alpha/vms.h"
825 xm_file="alpha/xm-vms.h"
826 tmake_file="${tmake_file} alpha/t-alpha alpha/t-vms alpha/t-ieee"
829 tm_file="elfos.h arm/elf.h arm/aout.h ${tm_file} vx-common.h vxworks.h arm/vxworks.h"
830 extra_options="${extra_options} arm/vxworks.opt"
831 tmake_file="${tmake_file} arm/t-arm arm/t-vxworks"
834 tm_file="dbxelf.h elfos.h ${fbsd_tm_file} arm/elf.h arm/aout.h arm/freebsd.h arm/arm.h"
835 tmake_file="${tmake_file} arm/t-arm arm/t-strongarm-elf"
838 tm_file="dbxelf.h elfos.h netbsd.h netbsd-elf.h arm/elf.h arm/aout.h arm/arm.h arm/netbsd-elf.h"
839 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
840 tmake_file="${tmake_file} arm/t-arm arm/t-netbsd"
842 arm*-*-linux*) # ARM GNU/Linux with ELF
843 tm_file="dbxelf.h elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h arm/elf.h arm/linux-gas.h arm/linux-elf.h"
846 tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
849 tmake_file="${tmake_file} t-linux arm/t-arm"
852 tm_file="$tm_file arm/bpabi.h arm/linux-eabi.h"
853 libgcc_tm_file="$libgcc_tm_file arm/bpabi-lib.h"
854 tmake_file="$tmake_file arm/t-arm-elf arm/t-bpabi arm/t-linux-eabi t-slibgcc-libgcc"
855 # Define multilib configuration for arm-linux-androideabi.
858 tmake_file="$tmake_file arm/t-linux-androideabi"
861 # The BPABI long long divmod functions return a 128-bit value in
862 # registers r0-r3. Correctly modeling that requires the use of
865 # The EABI requires the use of __cxa_atexit.
866 default_use_cxa_atexit=yes
869 tmake_file="$tmake_file arm/t-linux"
872 with_tls=${with_tls:-gnu}
873 tm_file="$tm_file arm/aout.h arm/arm.h"
874 tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
876 arm*-*-uclinux*) # ARM ucLinux
877 tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/linux-gas.h arm/uclinux-elf.h glibc-stdint.h"
878 tmake_file="arm/t-arm arm/t-arm-elf"
881 tm_file="$tm_file arm/bpabi.h arm/uclinux-eabi.h"
882 libgcc_tm_file="$libgcc_tm_file arm/bpabi-lib.h"
883 tmake_file="$tmake_file arm/t-bpabi"
884 # The BPABI long long divmod functions return a 128-bit value in
885 # registers r0-r3. Correctly modeling that requires the use of
888 # The EABI requires the use of __cxa_atexit.
889 default_use_cxa_atexit=yes
891 tm_file="$tm_file arm/aout.h arm/arm.h"
892 tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
895 tm_file="dbxelf.h elfos.h newlib-stdint.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/ecos-elf.h"
896 tmake_file="arm/t-arm arm/t-arm-elf"
897 tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
899 arm*-*-eabi* | arm*-*-symbianelf* )
900 # The BPABI long long divmod functions return a 128-bit value in
901 # registers r0-r3. Correctly modeling that requires the use of
904 default_use_cxa_atexit=yes
905 tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/bpabi.h"
906 libgcc_tm_file="$libgcc_tm_file arm/bpabi-lib.h"
907 tmake_file="arm/t-arm arm/t-arm-elf"
910 tm_file="$tm_file newlib-stdint.h"
911 tmake_file="${tmake_file} arm/t-bpabi"
915 tm_file="${tm_file} arm/symbian.h"
916 libgcc_tm_file="$libgcc_tm_file arm/symbian-lib.h"
917 # We do not include t-bpabi for Symbian OS because the system
918 # provides its own implementation of the BPABI functions.
919 tmake_file="${tmake_file} arm/t-symbian"
922 tm_file="${tm_file} arm/aout.h arm/arm.h"
923 tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
926 tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/rtems-elf.h rtems.h newlib-stdint.h"
927 tmake_file="arm/t-arm arm/t-arm-elf t-rtems arm/t-rtems"
928 tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
931 tm_file="dbxelf.h elfos.h newlib-stdint.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
932 tmake_file="arm/t-arm arm/t-arm-elf"
933 tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
936 tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h arm/wince-pe.h"
937 tmake_file="arm/t-arm arm/t-wince-pe"
938 extra_options="${extra_options} arm/pe.opt"
942 tm_file="elfos.h avr/elf.h avr/avr.h dbxelf.h avr/rtems.h rtems.h newlib-stdint.h"
943 tmake_file="avr/t-avr t-rtems avr/t-rtems"
944 extra_gcc_objs="driver-avr.o avr-devices.o"
945 extra_objs="avr-devices.o"
948 tm_file="elfos.h avr/elf.h avr/avr.h dbxelf.h newlib-stdint.h"
950 extra_gcc_objs="driver-avr.o avr-devices.o"
951 extra_objs="avr-devices.o"
954 tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h bfin/elf.h"
955 tmake_file=bfin/t-bfin-elf
959 tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h gnu-user.h linux.h glibc-stdint.h bfin/uclinux.h"
960 tmake_file=bfin/t-bfin-uclinux
964 tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h gnu-user.h linux.h glibc-stdint.h bfin/linux.h ./linux-sysroot-suffix.h"
965 tmake_file="t-slibgcc-elf-ver bfin/t-bfin-linux"
966 extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
970 tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h bfin/rtems.h rtems.h newlib-stdint.h"
971 tmake_file="bfin/t-bfin t-rtems bfin/t-rtems"
974 tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h bfin/elf.h"
975 tmake_file=bfin/t-bfin
979 crisv32-*-elf | crisv32-*-none)
980 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
981 tmake_file="cris/t-cris"
982 target_cpu_default=32
984 extra_options="${extra_options} cris/elf.opt"
987 cris-*-elf | cris-*-none)
988 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
989 tmake_file="cris/t-cris cris/t-elfmulti"
991 extra_options="${extra_options} cris/elf.opt"
994 crisv32-*-linux* | cris-*-linux*)
995 tm_file="dbxelf.h elfos.h ${tm_file} gnu-user.h linux.h glibc-stdint.h cris/linux.h"
996 # We need to avoid using t-linux, so override default tmake_file
997 tmake_file="cris/t-cris t-slibgcc-elf-ver cris/t-linux"
998 extra_options="${extra_options} cris/linux.opt"
1001 target_cpu_default=10
1004 target_cpu_default=32
1009 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
1010 tmake_file=fr30/t-fr30
1011 extra_parts="crti.o crtn.o crtbegin.o crtend.o"
1014 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
1015 libgcc_tm_file="${libgcc_tm_file} frv/frv-abi.h"
1016 tmake_file=frv/t-frv
1019 tm_file="dbxelf.h elfos.h ${tm_file} \
1020 gnu-user.h linux.h glibc-stdint.h frv/linux.h"
1021 libgcc_tm_file="${libgcc_tm_file} frv/frv-abi.h"
1022 tmake_file="${tmake_file} frv/t-frv frv/t-linux"
1027 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
1028 extra_parts="crti.o crtn.o crtbegin.o crtend.o"
1029 tmake_file="${tmake_file} moxie/t-moxie moxie/t-moxie-softfp soft-fp/t-softfp"
1034 tm_file="dbxelf.h elfos.h ${tm_file} gnu-user.h linux.h glibc-stdint.h moxie/uclinux.h"
1035 extra_parts="crti.o crtn.o crtbegin.o crtend.o"
1036 tmake_file="${tmake_file} moxie/t-moxie moxie/t-moxie-softfp soft-fp/t-softfp"
1039 tmake_file="${tmake_file} moxie/t-moxie moxie/t-moxie-softfp soft-fp/t-softfp t-rtems"
1040 tm_file="moxie/moxie.h dbxelf.h elfos.h moxie/rtems.h rtems.h newlib-stdint.h"
1043 tmake_file="h8300/t-h8300 h8300/t-elf t-rtems h8300/t-rtems"
1044 tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h h8300/rtems.h rtems.h newlib-stdint.h"
1047 tmake_file="h8300/t-h8300 h8300/t-elf"
1048 tm_file="h8300/h8300.h dbxelf.h elfos.h newlib-stdint.h h8300/elf.h"
1051 target_cpu_default="MASK_PA_11|MASK_PA_20"
1052 tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h gnu-user.h linux.h \
1053 glibc-stdint.h pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h \
1055 tmake_file="${tmake_file} pa/t-linux64"
1057 need_64bit_hwint=yes
1060 target_cpu_default="MASK_PA_11|MASK_NO_SPACE_REGS"
1061 tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h pa/pa-linux.h \
1062 pa/pa32-regs.h pa/pa32-linux.h"
1063 tmake_file="${tmake_file} pa/t-linux t-slibgcc-libgcc"
1064 # Set the libgcc version number
1065 if test x$sjlj = x1; then
1066 tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
1068 tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
1071 # port not yet contributed.
1073 # target_cpu_default="MASK_PA_11"
1075 hppa[12]*-*-hpux10*)
1077 hppa1.1-*-* | hppa2*-*-*)
1078 target_cpu_default="MASK_PA_11"
1081 tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
1082 pa/pa-hpux.h pa/pa-hpux10.h"
1083 extra_options="${extra_options} pa/pa-hpux.opt pa/pa-hpux10.opt"
1086 tm_file="${tm_file} pa/pa-hpux1010.h"
1087 extra_options="${extra_options} pa/pa-hpux1010.opt"
1090 use_gcc_stdint=provide
1091 tm_file="${tm_file} hpux-stdint.h"
1092 tmake_file="pa/t-pa-hpux10 pa/t-pa-hpux pa/t-hpux-shlib"
1093 case ${enable_threads} in
1095 if test x$have_pthread_h = xyes ; then
1096 tmake_file="${tmake_file} pa/t-dce-thr"
1100 tmake_file="${tmake_file} pa/t-dce-thr"
1103 # Set the libgcc version number
1104 if test x$sjlj = x1; then
1105 tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
1107 tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
1111 if test "x$with_dwarf2" != x; then
1112 echo "Warning: dwarf2 debug format is not supported for this target, --with-dwarf2 ignored" 1>&2
1117 target_cpu_default="MASK_PA_11|MASK_PA_20"
1118 if test x$gnu_ld = xyes
1120 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
1122 tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h \
1123 pa/pa64-regs.h pa/pa-hpux.h pa/pa-hpux1010.h \
1127 tm_file="${tm_file} pa/pa-hpux1111.h pa/pa-64.h pa/pa64-hpux.h"
1128 extra_options="${extra_options} pa/pa-hpux1111.opt"
1131 tm_file="${tm_file} pa/pa-hpux1131.h pa/pa-64.h pa/pa64-hpux.h"
1132 extra_options="${extra_options} pa/pa-hpux1131.opt"
1135 tm_file="${tm_file} pa/pa-64.h pa/pa64-hpux.h"
1138 extra_options="${extra_options} pa/pa-hpux.opt \
1139 pa/pa-hpux1010.opt pa/pa64-hpux.opt hpux11.opt"
1140 need_64bit_hwint=yes
1141 tmake_file="pa/t-pa64 pa/t-pa-hpux pa/t-hpux-shlib"
1142 # Set the libgcc version number
1143 if test x$sjlj = x1; then
1144 tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
1146 tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
1148 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o \
1150 case x${enable_threads} in
1158 use_gcc_stdint=provide
1159 tm_file="${tm_file} hpux-stdint.h"
1163 tm_file="${tm_file} hpux-stdint.h"
1167 hppa[12]*-*-hpux11*)
1169 hppa1.1-*-* | hppa2*-*-*)
1170 target_cpu_default="MASK_PA_11"
1173 tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
1174 pa/pa-hpux.h pa/pa-hpux1010.h pa/pa-hpux11.h"
1175 extra_options="${extra_options} pa/pa-hpux.opt pa/pa-hpux1010.opt \
1179 tm_file="${tm_file} pa/pa-hpux1111.h"
1180 extra_options="${extra_options} pa/pa-hpux1111.opt"
1183 tm_file="${tm_file} pa/pa-hpux1131.h"
1184 extra_options="${extra_options} pa/pa-hpux1131.opt"
1187 tmake_file="pa/t-pa-hpux11 pa/t-pa-hpux pa/t-hpux-shlib"
1188 # Set the libgcc version number
1189 if test x$sjlj = x1; then
1190 tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
1192 tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
1194 extra_parts="libgcc_stub.a"
1195 case x${enable_threads} in
1204 use_gcc_stdint=provide
1205 tm_file="${tm_file} hpux-stdint.h"
1209 tm_file="${tm_file} hpux-stdint.h"
1212 if test "x$with_dwarf2" != x; then
1213 echo "Warning: dwarf2 debug format is not supported for this target, --with-dwarf2 ignored" 1>&2
1217 i[34567]86-*-darwin*)
1218 need_64bit_hwint=yes
1220 # Baseline choice for a machine that allows m64 support.
1221 with_cpu=${with_cpu:-core2}
1222 tmake_file="${tmake_file} t-slibgcc-dummy i386/t-crtpc i386/t-crtfm"
1223 libgcc_tm_file="$libgcc_tm_file i386/darwin-lib.h"
1226 with_cpu=${with_cpu:-core2}
1227 tmake_file="${tmake_file} ${cpu_type}/t-darwin64 t-slibgcc-dummy i386/t-crtpc i386/t-crtfm"
1228 tm_file="${tm_file} ${cpu_type}/darwin64.h"
1229 libgcc_tm_file="$libgcc_tm_file i386/darwin-lib.h"
1232 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h"
1233 tmake_file="${tmake_file} i386/t-i386elf t-svr4"
1236 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h i386/x86-64.h"
1237 tmake_file="${tmake_file} i386/t-i386elf t-svr4"
1239 i[34567]86-*-freebsd*)
1240 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/freebsd.h"
1241 tmake_file="${tmake_file} i386/t-crtstuff"
1244 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/x86-64.h i386/freebsd.h i386/freebsd64.h"
1245 tmake_file="${tmake_file} i386/t-crtstuff"
1247 i[34567]86-*-netbsdelf*)
1248 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/netbsd-elf.h"
1249 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
1252 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/x86-64.h i386/netbsd64.h"
1253 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
1254 tmake_file="${tmake_file} i386/t-crtstuff"
1256 i[34567]86-*-openbsd2.*|i[34567]86-*openbsd3.[0123])
1257 tm_file="i386/i386.h i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h openbsd-oldgas.h openbsd.h i386/openbsd.h"
1258 extra_options="${extra_options} openbsd.opt"
1259 # needed to unconfuse gdb
1260 tmake_file="${tmake_file} t-libc-ok t-openbsd i386/t-openbsd"
1261 # we need collect2 until our bug is fixed...
1264 i[34567]86-*-openbsd*)
1265 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h"
1266 tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h i386/openbsdelf.h"
1267 extra_options="${extra_options} openbsd.opt"
1271 i[34567]86-*-linux* | i[34567]86-*-kfreebsd*-gnu | i[34567]86-*-knetbsd*-gnu | i[34567]86-*-gnu* | i[34567]86-*-kopensolaris*-gnu)
1272 # Intel 80386's running GNU/*
1273 # with ELF format using glibc 2
1274 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h gnu-user.h glibc-stdint.h"
1276 i[34567]86-*-linux*)
1277 tm_file="${tm_file} linux.h"
1278 # Assume modern glibc
1279 default_gnu_indirect_function=yes
1280 if test x$enable_targets = xall; then
1281 tm_file="${tm_file} i386/x86-64.h i386/gnu-user64.h i386/linux64.h"
1282 tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1283 tmake_file="${tmake_file} i386/t-linux64"
1284 x86_multilibs="${with_multilib_list}"
1285 if test "$x86_multilibs" = "default"; then
1286 x86_multilibs="m64,m32"
1288 x86_multilibs=`echo $x86_multilibs | sed -e 's/,/ /g'`
1289 for x86_multilib in ${x86_multilibs}; do
1290 case ${x86_multilib} in
1292 TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG},${x86_multilib}"
1295 echo "--with-multilib-list=${x86_with_multilib} not supported."
1299 TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's/^,//'`
1300 need_64bit_hwint=yes
1302 case X"${with_cpu}" in
1303 Xgeneric|Xatom|Xcore2|Xcorei7|Xcorei7-avx|Xnocona|Xx86-64|Xbdver1|Xbtver1|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx|Xathlon64-sse3|Xk8-sse3|Xopteron-sse3)
1306 if test x$with_cpu_64 = x; then
1311 echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
1312 echo "generic atom core2 corei7 corei7-avx nocona x86-64 bdver1 btver1 amdfam10 barcelona k8 opteron athlon64 athlon-fx athlon64-sse3 k8-sse3 opteron-sse3" 1>&2
1317 tm_file="${tm_file} i386/gnu-user.h i386/linux.h"
1320 i[34567]86-*-knetbsd*-gnu) tm_file="${tm_file} i386/gnu-user.h knetbsd-gnu.h i386/knetbsd-gnu.h" ;;
1321 i[34567]86-*-kfreebsd*-gnu) tm_file="${tm_file} i386/gnu-user.h kfreebsd-gnu.h i386/kfreebsd-gnu.h" ;;
1322 i[34567]86-*-kopensolaris*-gnu) tm_file="${tm_file} i386/gnu-user.h kopensolaris-gnu.h i386/kopensolaris-gnu.h" ;;
1323 i[34567]86-*-gnu*) tm_file="$tm_file i386/gnu-user.h gnu.h i386/gnu.h";;
1325 tmake_file="${tmake_file} i386/t-crtstuff i386/t-crtpc i386/t-crtfm t-dfprules"
1327 x86_64-*-linux* | x86_64-*-kfreebsd*-gnu | x86_64-*-knetbsd*-gnu)
1328 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h gnu-user.h glibc-stdint.h \
1329 i386/x86-64.h i386/gnu-user64.h"
1332 tm_file="${tm_file} linux.h i386/linux64.h"
1333 default_gnu_indirect_function=glibc-2011 ;;
1334 x86_64-*-kfreebsd*-gnu) tm_file="${tm_file} kfreebsd-gnu.h i386/kfreebsd-gnu64.h" ;;
1335 x86_64-*-knetbsd*-gnu) tm_file="${tm_file} knetbsd-gnu.h" ;;
1337 tmake_file="${tmake_file} i386/t-linux64 i386/t-crtstuff i386/t-crtpc i386/t-crtfm t-dfprules"
1338 x86_multilibs="${with_multilib_list}"
1339 if test "$x86_multilibs" = "default"; then
1340 x86_multilibs="m64,m32"
1342 x86_multilibs=`echo $x86_multilibs | sed -e 's/,/ /g'`
1343 for x86_multilib in ${x86_multilibs}; do
1344 case ${x86_multilib} in
1346 TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG},${x86_multilib}"
1349 echo "--with-multilib-list=${x86_with_multilib} not supported."
1353 TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's/^,//'`
1355 i[34567]86-pc-msdosdjgpp*)
1356 xm_file=i386/xm-djgpp.h
1357 tm_file="dbxcoff.h ${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/djgpp.h i386/djgpp-stdint.h"
1358 tmake_file="${tmake_file} i386/t-djgpp"
1359 extra_options="${extra_options} i386/djgpp.opt"
1364 i[34567]86-*-lynxos*)
1366 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/lynx.h lynx.h"
1367 tmake_file="${tmake_file} i386/t-crtstuff t-lynx"
1368 extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
1369 extra_options="${extra_options} lynx.opt"
1374 i[3456x]86-*-netware*)
1375 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h tm-dwarf2.h i386/netware.h"
1376 tmake_file="${tmake_file} i386/t-netware"
1377 extra_objs=netware.o
1378 extra_options="${extra_options} i386/netware.opt"
1381 extra_objs="$extra_objs nwld.o"
1382 tm_file="${tm_file} i386/nwld.h"
1383 tmake_file="${tmake_file} i386/t-nwld t-slibgcc-dummy"
1384 extra_parts="crt0.o libgcc.def libc.def libcpre.def posixpre.def"
1387 case x${enable_threads} in
1388 x | xyes | xposix) thread_file='posix';;
1389 xnks) thread_file='nks';;
1391 *) echo 'Unknown thread configuration for NetWare' >&2; exit 1;;
1394 i[34567]86-*-nto-qnx*)
1395 tm_file="${tm_file} i386/att.h dbxelf.h tm-dwarf2.h elfos.h i386/unix.h i386/nto.h"
1396 extra_options="${extra_options} i386/nto.opt"
1397 tmake_file="${tmake_file} i386/t-nto"
1401 i[34567]86-*-rtems*)
1402 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/rtemself.h rtems.h newlib-stdint.h"
1403 tmake_file="${tmake_file} i386/t-rtems t-rtems"
1405 i[34567]86-*-solaris2* | x86_64-*-solaris2.1[0-9]*)
1406 tm_file="${tm_file} i386/unix.h i386/att.h ${sol2_tm_file}"
1407 # Set default arch_32 to pentium4, tune_32 to generic like the other
1408 # i386 targets, although config.guess defaults to i386-pc-solaris2*.
1411 # Solaris 8 and 9/x86 cannot execute SSE/SSE2 instructions by
1413 with_arch_32=${with_arch_32:-pentiumpro}
1416 with_arch_32=${with_arch_32:-pentium4}
1419 with_tune_32=${with_tune_32:-generic}
1421 *-*-solaris2.1[0-9]*)
1422 tm_file="${tm_file} i386/x86-64.h i386/sol2-bi.h sol2-bi.h"
1423 tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1424 tmake_file="$tmake_file i386/t-sol2-64"
1425 need_64bit_hwint=yes
1427 case X"${with_cpu}" in
1428 Xgeneric|Xatom|Xcore2|Xcorei7|Xcorei7-avx|Xnocona|Xx86-64|Xbdver1|Xbtver1|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx|Xathlon64-sse3|Xk8-sse3|Xopteron-sse3)
1431 if test x$with_cpu_64 = x; then
1436 echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
1437 echo "generic atom core2 corei7 corei7-avx nocona x86-64 bdver1 btver1 amdfam10 barcelona k8 opteron athlon64 athlon-fx athlon64-sse3 k8-sse3 opteron-sse3" 1>&2
1444 i[4567]86-wrs-vxworks|i[4567]86-wrs-vxworksae)
1445 tm_file="${tm_file} i386/unix.h i386/att.h elfos.h vx-common.h"
1448 tm_file="${tm_file} vxworksae.h i386/vx-common.h i386/vxworksae.h"
1449 tmake_file="${tmake_file} i386/t-vxworks i386/t-vxworksae"
1452 tm_file="${tm_file} vxworks.h i386/vx-common.h i386/vxworks.h"
1453 tmake_file="${tmake_file} i386/t-vxworks"
1457 i[34567]86-*-cygwin*)
1458 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/cygwin.h i386/cygwin-stdint.h"
1459 xm_file=i386/xm-cygwin.h
1460 # This has to match the logic for DWARF2_UNWIND_INFO in gcc/config/i386/cygming.h
1461 if test x$sjlj = x0; then
1462 tmake_eh_file="i386/t-dw2-eh"
1464 tmake_eh_file="i386/t-sjlj-eh"
1466 # Shared libgcc DLL install dir depends on cross/native build.
1467 if test x${host} = x${target} ; then
1468 tmake_dlldir_file="i386/t-dlldir"
1470 tmake_dlldir_file="i386/t-dlldir-x"
1472 tmake_file="${tmake_file} ${tmake_eh_file} ${tmake_dlldir_file} i386/t-cygming i386/t-cygwin t-dfprules"
1473 target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1474 extra_options="${extra_options} i386/cygming.opt"
1475 extra_objs="winnt.o winnt-stubs.o"
1476 c_target_objs="${c_target_objs} msformat-c.o"
1477 cxx_target_objs="${cxx_target_objs} winnt-cxx.o msformat-c.o"
1478 if test x$enable_threads = xyes; then
1483 i[34567]86-*-mingw* | x86_64-*-mingw*)
1484 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h"
1485 xm_file=i386/xm-mingw32.h
1487 x86_64-*-* | *-w64-*)
1488 need_64bit_hwint=yes
1494 if test x$enable_threads = xposix ; then
1495 tm_file="${tm_file} i386/mingw-pthread.h"
1497 tm_file="${tm_file} i386/mingw32.h"
1498 # This makes the logic if mingw's or the w64 feature set has to be used
1501 user_headers_inc_next_post="${user_headers_inc_next_post} float.h"
1502 user_headers_inc_next_pre="${user_headers_inc_next_pre} stddef.h stdarg.h"
1503 tm_file="${tm_file} i386/mingw-w64.h"
1504 if test x$enable_targets = xall; then
1505 tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1506 case X"${with_cpu}" in
1507 Xgeneric|Xatom|Xcore2|Xcorei7|Xcorei7-avx|Xnocona|Xx86-64|Xbdver1|Xbtver1|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx|Xathlon64-sse3|Xk8-sse3|Xopteron-sse3)
1510 if test x$with_cpu_64 = x; then
1515 echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
1516 echo "generic atom core2 corei7 Xcorei7-avx nocona x86-64 bdver1 btver1 amdfam10 barcelona k8 opteron athlon64 athlon-fx athlon64-sse3 k8-sse3 opteron-sse3" 1>&2
1525 tm_file="${tm_file} i386/mingw-stdint.h"
1526 # This has to match the logic for DWARF2_UNWIND_INFO in gcc/config/i386/cygming.h
1527 if test x$sjlj = x0; then
1528 tmake_eh_file="i386/t-dw2-eh"
1530 tmake_eh_file="i386/t-sjlj-eh"
1532 # Shared libgcc DLL install dir depends on cross/native build.
1533 if test x${host} = x${target} ; then
1534 tmake_dlldir_file="i386/t-dlldir"
1536 tmake_dlldir_file="i386/t-dlldir-x"
1538 tmake_file="${tmake_file} ${tmake_eh_file} ${tmake_dlldir_file} i386/t-cygming t-dfprules"
1541 tmake_file="${tmake_file} i386/t-mingw-w64"
1544 tmake_file="${tmake_file} i386/t-mingw-w32"
1547 tmake_file="${tmake_file} i386/t-mingw32"
1550 target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1551 extra_options="${extra_options} i386/cygming.opt i386/mingw.opt"
1554 extra_options="${extra_options} i386/mingw-w64.opt"
1559 extra_objs="winnt.o winnt-stubs.o"
1560 c_target_objs="${c_target_objs} msformat-c.o"
1561 cxx_target_objs="${cxx_target_objs} winnt-cxx.o msformat-c.o"
1562 default_use_cxa_atexit=yes
1564 case ${enable_threads} in
1565 "" | yes | win32) thread_file='win32'
1566 tmake_file="${tmake_file} i386/t-gthr-win32"
1570 tmake_file="i386/t-mingw-pthread ${tmake_file}"
1575 tmake_file="${tmake_file} i386/t-crtfm"
1582 tm_file="${tm_file} i386/crtdll.h"
1584 *mingw32msv* | *mingw*)
1588 i[34567]86-*-interix3*)
1589 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/i386-interix.h i386/i386-interix3.h interix.h interix3.h"
1590 tmake_file="${tmake_file} i386/t-interix"
1591 extra_options="${extra_options} rpath.opt interix.opt"
1593 target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1594 if test x$enable_threads = xyes ; then
1597 if test x$stabs = xyes ; then
1598 tm_file="${tm_file} dbxcoff.h"
1602 tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h ia64/sysv4.h ia64/elf.h"
1603 tmake_file="ia64/t-ia64"
1604 target_cpu_default="0"
1605 if test x$gas = xyes
1607 target_cpu_default="${target_cpu_default}|MASK_GNU_AS"
1609 if test x$gnu_ld = xyes
1611 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
1613 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1616 tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} ia64/sysv4.h ia64/freebsd.h"
1617 target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1618 tmake_file="${tmake_file} ia64/t-ia64"
1619 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1622 tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ia64/sysv4.h ia64/linux.h"
1623 tmake_file="${tmake_file} ia64/t-ia64 t-libunwind ia64/t-glibc"
1624 if test x$with_system_libunwind != xyes ; then
1625 tmake_file="${tmake_file} t-libunwind-elf ia64/t-glibc-libunwind"
1627 target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1628 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1631 tm_file="${tm_file} dbxelf.h elfos.h ia64/sysv4.h ia64/hpux.h"
1632 tmake_file="ia64/t-ia64 ia64/t-hpux"
1633 target_cpu_default="MASK_GNU_AS"
1634 case x$enable_threads in
1640 c_target_objs="ia64-c.o"
1641 cxx_target_objs="ia64-c.o"
1642 extra_options="${extra_options} ia64/ilp32.opt hpux11.opt"
1644 tm_file="${tm_file} hpux-stdint.h"
1647 tm_file="${tm_file} ia64/hpux-unix2003.h"
1652 tm_file="${tm_file} elfos.h ia64/sysv4.h ia64/elf.h ia64/vms.h ia64/vms64.h"
1653 xm_file="vms/xm-vms.h vms/xm-vms64.h"
1654 tmake_file="${tmake_file} vms/t-vms64 ia64/t-ia64 ia64/t-vms"
1655 target_cpu_default="0"
1656 if test x$gas = xyes
1658 target_cpu_default="${target_cpu_default}|MASK_GNU_AS"
1660 extra_options="${extra_options} ia64/vms.opt"
1663 tm_file="elfos.h newlib-stdint.h iq2000/iq2000.h"
1664 tmake_file=iq2000/t-iq2000
1665 out_file=iq2000/iq2000.c
1666 md_file=iq2000/iq2000.md
1669 tm_file="dbxelf.h elfos.h ${tm_file}"
1670 tmake_file="${tmake_file} lm32/t-lm32 lm32/t-fprules-softfp soft-fp/t-softfp"
1673 tm_file="dbxelf.h elfos.h ${tm_file} lm32/rtems.h rtems.h newlib-stdint.h"
1674 tmake_file="${tmake_file} lm32/t-lm32 lm32/t-fprules-softfp soft-fp/t-softfp"
1675 tmake_file="${tmake_file} t-rtems"
1678 tm_file="dbxelf.h elfos.h ${tm_file} gnu-user.h linux.h lm32/uclinux-elf.h"
1679 tmake_file="${tmake_file} lm32/t-lm32 lm32/t-fprules-softfp soft-fp/t-softfp"
1682 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
1683 extra_parts="crtinit.o crtfini.o"
1686 tm_file="dbxelf.h elfos.h newlib-stdint.h m32r/little.h ${tm_file}"
1687 extra_parts="crtinit.o crtfini.o m32rx/crtinit.o m32rx/crtfini.o"
1690 tm_file="dbxelf.h elfos.h ${tm_file} m32r/rtems.h rtems.h newlib-stdint.h"
1691 tmake_file="m32r/t-m32r t-rtems"
1692 extra_parts="crtinit.o crtfini.o"
1695 tm_file="dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ${tm_file} m32r/linux.h"
1696 # We override the tmake_file for linux -- why?
1697 tmake_file="t-slibgcc-elf-ver m32r/t-linux"
1699 if test x$enable_threads = xyes; then
1704 tm_file="dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h m32r/little.h ${tm_file} m32r/linux.h"
1705 # We override the tmake_file for linux -- why?
1706 tmake_file="t-slibgcc-elf-ver m32r/t-linux"
1708 if test x$enable_threads = xyes; then
1712 m68k-*-elf* | fido-*-elf*)
1715 # Check that $with_cpu makes sense.
1720 echo "Cannot accept --with-cpu=$with_cpu"
1727 default_m68k_cpu=68020
1731 tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h newlib-stdint.h m68k/m68kemb.h m68k/m68020-elf.h"
1732 tm_defines="${tm_defines} MOTOROLA=1"
1733 tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-m68kelf"
1734 # Add multilibs for targets other than fido.
1739 tmake_file="$tmake_file m68k/t-mlibs"
1742 extra_parts="crtbegin.o crtend.o"
1745 default_m68k_cpu=68020
1747 tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h m68k/netbsd-elf.h"
1748 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
1749 tm_defines="${tm_defines} MOTOROLA=1"
1752 default_m68k_cpu=68020
1754 # needed to unconfuse gdb
1755 tm_defines="${tm_defines} OBSD_OLD_GAS"
1756 tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h m68k/openbsd.h"
1757 extra_options="${extra_options} openbsd.opt"
1758 tmake_file="t-libc-ok t-openbsd m68k/t-openbsd"
1759 # we need collect2 until our bug is fixed...
1762 m68k-*-uclinux*) # Motorola m68k/ColdFire running uClinux
1763 # with uClibc, using the new GNU/Linux-style
1765 default_m68k_cpu=68020
1767 tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h flat.h m68k/linux.h m68k/uclinux.h ./sysroot-suffix.h"
1768 extra_options="${extra_options} m68k/uclinux.opt"
1769 tm_defines="${tm_defines} MOTOROLA=1"
1770 tmake_file="m68k/t-floatlib m68k/t-uclinux m68k/t-mlibs"
1772 m68k-*-linux*) # Motorola m68k's running GNU/Linux
1773 # with ELF format using glibc 2
1774 # aka the GNU/Linux C library 6.
1775 default_m68k_cpu=68020
1777 with_arch=${with_arch:-m68k}
1778 tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h m68k/linux.h ./sysroot-suffix.h"
1779 extra_options="${extra_options} m68k/ieee.opt"
1780 tm_defines="${tm_defines} MOTOROLA=1"
1781 tmake_file="${tmake_file} m68k/t-floatlib m68k/t-linux m68k/t-mlibs"
1782 # if not configured with --enable-sjlj-exceptions, bump the
1783 # libgcc version number
1784 if test x$sjlj != x1; then
1785 tmake_file="$tmake_file m68k/t-slibgcc-elf-ver"
1789 default_m68k_cpu=68020
1791 tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-crtstuff t-rtems m68k/t-rtems m68k/t-mlibs"
1792 tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h newlib-stdint.h"
1793 tm_defines="${tm_defines} MOTOROLA=1"
1794 extra_parts="crtbegin.o crtend.o"
1797 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file} mcore/mcore-elf.h"
1798 tmake_file=mcore/t-mcore
1802 tm_file="dbxelf.h elfos.h ${tm_file}"
1803 tmake_file=mep/t-mep
1804 extra_parts="crtbegin.o crtend.o"
1805 c_target_objs="mep-pragma.o"
1806 cxx_target_objs="mep-pragma.o"
1807 if test -d "${srcdir}/../newlib/libc/include" &&
1808 test "x$with_headers" = x; then
1814 tm_file="${tm_file} dbxelf.h gnu-user.h linux.h microblaze/linux.h"
1815 c_target_objs="${c_target_objs} microblaze-c.o"
1816 cxx_target_objs="${cxx_target_objs} microblaze-c.o"
1817 tmake_file="${tmake_file} t-slibgcc-elf-ver t-slibgcc-nolc-override t-linux microblaze/t-microblaze"
1818 extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o crtbeginT.o"
1821 tm_file="${tm_file} dbxelf.h"
1822 c_target_objs="${c_target_objs} microblaze-c.o"
1823 cxx_target_objs="${cxx_target_objs} microblaze-c.o"
1824 tmake_file="${tmake_file} microblaze/t-microblaze"
1827 tm_file="elfos.h ${tm_file} mips/iris6.h"
1828 tmake_file="mips/t-irix6 t-slibgcc-dummy"
1829 extra_options="${extra_options} rpath.opt mips/iris6.opt"
1830 target_cpu_default="MASK_ABICALLS"
1831 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_N32"
1832 # Only IRIX Development Foundation 1.3 for IRIX 6.5 provides stdint.h.
1834 if test "x$stabs" = xyes
1836 tm_file="${tm_file} dbx.h"
1838 if test "x$gnu_ld" = xyes
1840 tm_defines="${tm_defines} IRIX_USING_GNU_LD"
1842 case ${enable_threads}:${have_pthread_h} in
1843 "":yes | yes:yes ) thread_file=posix ;;
1846 mips*-*-netbsd*) # NetBSD/mips, either endian.
1847 target_cpu_default="MASK_ABICALLS"
1848 tm_file="elfos.h ${tm_file} mips/elf.h netbsd.h netbsd-elf.h mips/netbsd.h"
1849 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
1851 mips64*-*-linux* | mipsisa64*-*-linux*)
1852 tm_file="dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ${tm_file} mips/linux.h mips/linux64.h"
1853 tmake_file="${tmake_file} mips/t-linux64 mips/t-libgcc-mips16"
1854 tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_N32"
1856 mips64el-st-linux-gnu)
1857 tm_file="${tm_file} mips/st.h"
1858 tmake_file="${tmake_file} mips/t-st"
1860 mips64octeon*-*-linux*)
1861 tm_defines="${tm_defines} MIPS_CPU_STRING_DEFAULT=\\\"octeon\\\""
1862 target_cpu_default=MASK_SOFT_FLOAT_ABI
1864 mipsisa64r2*-*-linux*)
1865 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=65"
1868 extra_parts="$extra_parts crtfastmath.o"
1871 test x$with_llsc != x || with_llsc=yes
1873 mips*-*-linux*) # Linux MIPS, either endian.
1874 tm_file="dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ${tm_file} mips/linux.h"
1875 tmake_file="${tmake_file} mips/t-libgcc-mips16"
1878 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33"
1881 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32"
1883 extra_parts="$extra_parts crtfastmath.o"
1884 test x$with_llsc != x || with_llsc=yes
1887 tm_defines="${tm_defines} OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_OBJECT OBSD_HAS_CORRECT_SPECS"
1888 target_cpu_default="MASK_ABICALLS"
1889 tm_file="mips/mips.h openbsd.h openbsd-stdint.h openbsd-libpthread.h mips/openbsd.h mips/sdb.h"
1890 extra_options="${extra_options} openbsd.opt"
1893 tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=0";;
1894 *) tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=MASK_BIG_ENDIAN";;
1898 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/sde.h"
1899 tmake_file="mips/t-sde mips/t-libgcc-mips16"
1900 extra_options="${extra_options} mips/sde.opt"
1901 case "${with_newlib}" in
1903 # newlib / libgloss.
1906 # MIPS toolkit libraries.
1907 tm_file="$tm_file mips/sdemtk.h"
1908 tmake_file="$tmake_file mips/t-sdemtk"
1909 case ${enable_threads} in
1911 thread_file='mipssde'
1918 tm_defines="MIPS_ISA_DEFAULT=33 MIPS_ABI_DEFAULT=ABI_32"
1921 tm_defines="MIPS_ISA_DEFAULT=32 MIPS_ABI_DEFAULT=ABI_32"
1924 tm_defines="MIPS_ISA_DEFAULT=65 MIPS_ABI_DEFAULT=ABI_N32"
1927 tm_defines="MIPS_ISA_DEFAULT=64 MIPS_ABI_DEFAULT=ABI_N32"
1931 mipsisa32-*-elf* | mipsisa32el-*-elf* | \
1932 mipsisa32r2-*-elf* | mipsisa32r2el-*-elf* | \
1933 mipsisa64-*-elf* | mipsisa64el-*-elf* | \
1934 mipsisa64r2-*-elf* | mipsisa64r2el-*-elf*)
1935 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1936 tmake_file="mips/t-isa3264 mips/t-libgcc-mips16"
1939 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33"
1942 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32"
1945 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=65"
1948 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64"
1952 mipsisa32*-*-elfoabi*)
1953 tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_32"
1954 tm_file="${tm_file} mips/elfoabi.h"
1956 mipsisa64*-*-elfoabi*)
1957 tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_O64"
1958 tm_file="${tm_file} mips/elfoabi.h"
1961 tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_EABI"
1965 mipsisa64sr71k-*-elf*)
1966 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1967 tmake_file=mips/t-sr71k
1968 target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1969 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sr71000\\\" MIPS_ABI_DEFAULT=ABI_EABI"
1971 mipsisa64sb1-*-elf* | mipsisa64sb1el-*-elf*)
1972 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1973 tmake_file="mips/t-elf mips/t-libgcc-mips16 mips/t-sb1"
1974 target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1975 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sb1\\\" MIPS_ABI_DEFAULT=ABI_O64"
1977 mips-*-elf* | mipsel-*-elf*)
1978 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1979 tmake_file="mips/t-elf mips/t-libgcc-mips16"
1981 mips64-*-elf* | mips64el-*-elf*)
1982 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1983 tmake_file="mips/t-elf mips/t-libgcc-mips16"
1984 target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1985 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1987 mips64vr-*-elf* | mips64vrel-*-elf*)
1988 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/vr.h mips/elf.h"
1989 tmake_file=mips/t-vr
1990 tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_EABI"
1992 mips64orion-*-elf* | mips64orionel-*-elf*)
1993 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elforion.h mips/elf.h"
1994 tmake_file="mips/t-elf mips/t-libgcc-mips16"
1995 target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1996 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1999 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/rtems.h rtems.h"
2000 tmake_file="mips/t-elf mips/t-libgcc-mips16 t-rtems mips/t-rtems"
2003 tm_file="elfos.h ${tm_file} mips/elf.h vx-common.h vxworks.h mips/vxworks.h"
2004 tmake_file="${tmake_file} mips/t-vxworks"
2006 mipstx39-*-elf* | mipstx39el-*-elf*)
2007 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/r3900.h mips/elf.h"
2008 tmake_file="mips/t-r3900 mips/t-libgcc-mips16"
2010 mmix-knuth-mmixware)
2011 tm_file="${tm_file} newlib-stdint.h"
2012 need_64bit_hwint=yes
2016 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
2017 if test x$stabs = xyes
2019 tm_file="${tm_file} dbx.h"
2025 tm_file="${tm_file} newlib-stdint.h"
2029 tm_file="${tm_file} newlib-stdint.h"
2031 tmake_file="picochip/t-picochip t-pnt16-warn"
2033 # port not yet contributed
2034 #powerpc-*-openbsd*)
2035 # tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-fprules-fpbit "
2039 extra_options="${extra_options} rs6000/darwin.opt"
2040 extra_parts="crt2.o"
2042 *-darwin1[0-9]* | *-darwin[8-9]*)
2043 tmake_file="${tmake_file} rs6000/t-darwin8"
2044 tm_file="${tm_file} rs6000/darwin8.h"
2047 tm_file="${tm_file} rs6000/darwin7.h"
2052 tmake_file="${tmake_file} t-slibgcc-dummy"
2053 extra_headers=altivec.h
2055 powerpc64-*-darwin*)
2056 extra_options="${extra_options} ${cpu_type}/darwin.opt"
2057 extra_parts="crt2.o"
2058 tmake_file="${tmake_file} ${cpu_type}/t-darwin64 t-slibgcc-dummy"
2059 tm_file="${tm_file} ${cpu_type}/darwin8.h ${cpu_type}/darwin64.h"
2060 extra_headers=altivec.h
2063 tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} rs6000/sysv4.h rs6000/freebsd.h"
2064 tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm rs6000/t-freebsd"
2065 tmake_file="${tmake_file} t-slibgcc-libgcc rs6000/t-fprules-softfp soft-fp/t-softfp"
2066 extra_options="${extra_options} rs6000/sysv4.opt"
2069 tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h freebsd-spec.h rs6000/sysv4.h rs6000/netbsd.h"
2070 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
2071 tmake_file="${tmake_file} rs6000/t-netbsd"
2072 extra_options="${extra_options} rs6000/sysv4.opt"
2075 tm_file="${tm_file} dbxelf.h elfos.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabispe.h"
2076 extra_options="${extra_options} rs6000/sysv4.opt"
2077 tmake_file="rs6000/t-spe rs6000/t-ppccomm"
2080 powerpc-*-eabisimaltivec*)
2081 tm_file="${tm_file} dbxelf.h elfos.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h rs6000/eabialtivec.h"
2082 extra_options="${extra_options} rs6000/sysv4.opt"
2083 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcendian rs6000/t-ppccomm"
2087 tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h"
2088 extra_options="${extra_options} rs6000/sysv4.opt"
2089 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
2093 tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h"
2094 extra_options="${extra_options} rs6000/sysv4.opt"
2095 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
2097 powerpc-*-eabialtivec*)
2098 tm_file="${tm_file} dbxelf.h elfos.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabialtivec.h"
2099 extra_options="${extra_options} rs6000/sysv4.opt"
2100 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcendian rs6000/t-ppccomm"
2103 powerpc-xilinx-eabi*)
2104 tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/singlefp.h rs6000/xfpu.h rs6000/xilinx.h"
2105 extra_options="${extra_options} rs6000/sysv4.opt rs6000/xilinx.opt"
2106 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm rs6000/t-xilinx"
2110 tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h"
2111 extra_options="${extra_options} rs6000/sysv4.opt"
2112 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
2116 tm_file="${tm_file} dbxelf.h elfos.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/rtems.h rtems.h"
2117 extra_options="${extra_options} rs6000/sysv4.opt"
2118 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-rtems t-rtems rs6000/t-ppccomm"
2120 powerpc-*-linux* | powerpc64-*-linux*)
2121 tm_file="${tm_file} dbxelf.h elfos.h freebsd-spec.h rs6000/sysv4.h"
2122 extra_options="${extra_options} rs6000/sysv4.opt"
2123 tmake_file="t-dfprules rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
2126 powerpc64-*-linux*spe* | powerpc64-*-linux*paired*)
2127 echo "*** Configuration ${target} not supported" 1>&2
2130 powerpc-*-linux*spe* | powerpc-*-linux*paired*)
2134 test x$with_cpu != x || cpu_is_64bit=yes
2138 case ${maybe_biarch}:${enable_targets}:${cpu_is_64bit} in
2139 always:* | yes:*powerpc64* | yes:all:* | yes:*:yes)
2140 if test x$cpu_is_64bit = xyes; then
2141 tm_file="${tm_file} rs6000/default64.h"
2143 tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h glibc-stdint.h"
2144 tmake_file="$tmake_file rs6000/t-linux64"
2145 extra_options="${extra_options} rs6000/linux64.opt"
2148 tm_file="${tm_file} rs6000/linux.h glibc-stdint.h"
2151 tmake_file="${tmake_file} t-slibgcc-libgcc rs6000/t-fprules-softfp soft-fp/t-softfp"
2153 powerpc*-*-linux*altivec*)
2154 tm_file="${tm_file} rs6000/linuxaltivec.h" ;;
2155 powerpc*-*-linux*spe*)
2156 tm_file="${tm_file} rs6000/linuxspe.h rs6000/e500.h" ;;
2157 powerpc*-*-linux*paired*)
2158 tm_file="${tm_file} rs6000/750cl.h" ;;
2160 if test x${enable_secureplt} = xyes; then
2161 tm_file="rs6000/secureplt.h ${tm_file}"
2164 powerpc-wrs-vxworks|powerpc-wrs-vxworksae)
2165 tm_file="${tm_file} elfos.h freebsd-spec.h rs6000/sysv4.h"
2166 tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppccomm rs6000/t-vxworks"
2167 extra_options="${extra_options} rs6000/sysv4.opt"
2168 extra_headers=ppc-asm.h
2171 tm_file="${tm_file} vx-common.h vxworksae.h rs6000/vxworks.h rs6000/e500.h"
2172 tmake_file="${tmake_file} rs6000/t-vxworksae"
2175 tm_file="${tm_file} vx-common.h vxworks.h rs6000/vxworks.h rs6000/e500.h"
2181 tm_file="${tm_file} dbxelf.h elfos.h rs6000/sysv4.h rs6000/lynx.h lynx.h"
2182 tmake_file="t-lynx rs6000/t-lynx"
2183 extra_options="${extra_options} rs6000/sysv4.opt lynx.opt"
2184 extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
2190 tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h"
2191 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
2192 extra_options="${extra_options} rs6000/sysv4.opt"
2194 powerpcle-*-eabisim*)
2195 tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h"
2196 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
2197 extra_options="${extra_options} rs6000/sysv4.opt"
2201 tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/e500.h"
2202 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
2203 extra_options="${extra_options} rs6000/sysv4.opt"
2206 rs6000-ibm-aix4.[3456789]* | powerpc-ibm-aix4.[3456789]*)
2207 tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix43.h rs6000/xcoff.h rs6000/aix-stdint.h"
2208 tmake_file=rs6000/t-aix43
2209 extra_options="${extra_options} rs6000/aix64.opt"
2212 use_gcc_stdint=provide
2215 rs6000-ibm-aix5.1.* | powerpc-ibm-aix5.1.*)
2216 tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix51.h rs6000/xcoff.h rs6000/aix-stdint.h"
2217 extra_options="${extra_options} rs6000/aix64.opt"
2218 tmake_file=rs6000/t-aix43
2224 rs6000-ibm-aix5.2.* | powerpc-ibm-aix5.2.*)
2225 tm_file="${tm_file} rs6000/aix.h rs6000/aix52.h rs6000/xcoff.h rs6000/aix-stdint.h"
2226 tmake_file=rs6000/t-aix52
2227 extra_options="${extra_options} rs6000/aix64.opt"
2233 rs6000-ibm-aix5.3.* | powerpc-ibm-aix5.3.*)
2234 tm_file="${tm_file} rs6000/aix.h rs6000/aix53.h rs6000/xcoff.h rs6000/aix-stdint.h"
2235 tmake_file=rs6000/t-aix52
2236 extra_options="${extra_options} rs6000/aix64.opt"
2240 extra_headers=altivec.h
2242 rs6000-ibm-aix[6789].* | powerpc-ibm-aix[6789].*)
2243 tm_file="${tm_file} rs6000/aix.h rs6000/aix61.h rs6000/xcoff.h rs6000/aix-stdint.h"
2244 tmake_file=rs6000/t-aix52
2245 extra_options="${extra_options} rs6000/aix64.opt"
2249 extra_headers=altivec.h
2252 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
2253 libgcc_tm_file="${libgcc_tm_file} rx/rx-abi.h"
2254 tmake_file="${tmake_file} rx/t-rx"
2257 tm_file="s390/s390.h dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h s390/linux.h"
2260 tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h s390/linux.h"
2261 tm_p_file=s390/s390-protos.h
2262 md_file=s390/s390.md
2263 extra_modes=s390/s390-modes.def
2264 out_file=s390/s390.c
2265 tmake_file="${tmake_file} s390/t-linux64"
2268 tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h s390/tpf.h"
2269 tm_p_file=s390/s390-protos.h
2270 md_file=s390/s390.md
2271 extra_modes=s390/s390-modes.def
2272 out_file=s390/s390.c
2273 extra_parts="crtbeginS.o crtendS.o"
2275 extra_options="${extra_options} s390/tpf.opt"
2280 tm_file="dbxelf.h elfos.h score/elf.h score/score.h newlib-stdint.h"
2281 extra_parts="crti.o crtn.o crtbegin.o crtend.o"
2282 tmake_file="${tmake_file} score/t-score-elf score/t-score-softfp soft-fp/t-softfp"
2284 sh-*-elf* | sh[12346l]*-*-elf* | \
2285 sh-*-linux* | sh[2346lbe]*-*-linux* | \
2286 sh-*-netbsdelf* | shl*-*-netbsdelf* | sh5-*-netbsd* | sh5l*-*-netbsd* | \
2287 sh64-*-netbsd* | sh64l*-*-netbsd*)
2288 tmake_file="${tmake_file} sh/t-sh sh/t-elf"
2289 if test x${with_endian} = x; then
2291 sh[1234]*be-*-* | sh[1234]*eb-*-*) with_endian=big ;;
2292 shbe-*-* | sheb-*-*) with_endian=big,little ;;
2293 sh[1234]l* | sh[34]*-*-linux*) with_endian=little ;;
2294 shl* | sh64l* | sh*-*-linux* | \
2295 sh5l* | sh-superh-elf) with_endian=little,big ;;
2296 sh[1234]*-*-*) with_endian=big ;;
2297 *) with_endian=big,little ;;
2300 # TM_ENDIAN_CONFIG is used by t-sh to determine multilibs.
2301 # First word : the default endian.
2302 # Second word: the secondary endian (optional).
2303 case ${with_endian} in
2304 big) TM_ENDIAN_CONFIG=mb ;;
2305 little) TM_ENDIAN_CONFIG=ml ;;
2306 big,little) TM_ENDIAN_CONFIG="mb ml" ;;
2307 little,big) TM_ENDIAN_CONFIG="ml mb" ;;
2308 *) echo "with_endian=${with_endian} not supported."; exit 1 ;;
2310 case ${with_endian} in
2311 little*) tm_file="sh/little.h ${tm_file}" ;;
2313 tm_file="${tm_file} dbxelf.h elfos.h sh/elf.h"
2315 sh*-*-linux*) tmake_file="${tmake_file} sh/t-linux"
2316 tm_file="${tm_file} gnu-user.h linux.h glibc-stdint.h sh/linux.h" ;;
2318 tm_file="${tm_file} netbsd.h netbsd-elf.h sh/netbsd-elf.h"
2319 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
2322 sh*-superh-elf) if test x$with_libgloss != xno; then
2324 tm_file="${tm_file} sh/newlib.h"
2326 tm_file="${tm_file} sh/embed-elf.h"
2327 tm_file="${tm_file} sh/superh.h"
2328 tmake_file="${tmake_file} sh/t-superh"
2329 extra_options="${extra_options} sh/superh.opt" ;;
2330 *) if test x$with_newlib = xyes \
2331 && test x$with_libgloss = xyes; then
2332 tm_file="${tm_file} sh/newlib.h"
2334 tm_file="${tm_file} sh/embed-elf.h" ;;
2338 # SHmedia, 32-bit ABI
2339 tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd"
2342 # SHmedia, 64-bit ABI
2343 tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd sh/t-netbsd-sh5-64"
2346 tmake_file="${tmake_file} sh/t-netbsd"
2349 tmake_file="${tmake_file} sh/t-sh64 sh/t-linux64"
2350 tm_file="${tm_file} sh/sh64.h"
2351 extra_headers="shmedia.h ushmedia.h sshmedia.h"
2354 tmake_file="${tmake_file} sh/t-sh64"
2355 tm_file="${tm_file} sh/sh64.h"
2356 if test x$with_newlib = xyes; then
2357 tm_file="${tm_file} newlib-stdint.h"
2359 extra_headers="shmedia.h ushmedia.h sshmedia.h"
2362 tm_file="${tm_file} newlib-stdint.h"
2365 # sed el/eb endian suffixes away to avoid confusion with sh[23]e
2366 case `echo ${target} | sed 's/e[lb]-/-/'` in
2367 sh64*-*-netbsd*) sh_cpu_target=sh5-64media ;;
2368 sh64* | sh5*-*-netbsd*) sh_cpu_target=sh5-32media ;;
2369 sh4a_single_only*) sh_cpu_target=sh4a-single-only ;;
2370 sh4a_single*) sh_cpu_target=sh4a-single ;;
2371 sh4a_nofpu*) sh_cpu_target=sh4a-nofpu ;;
2372 sh4al) sh_cpu_target=sh4al ;;
2373 sh4a*) sh_cpu_target=sh4a ;;
2374 sh4_single_only*) sh_cpu_target=sh4-single-only ;;
2375 sh4_single*) sh_cpu_target=sh4-single ;;
2376 sh4_nofpu*) sh_cpu_target=sh4-nofpu ;;
2377 sh4* | sh-superh-*) sh_cpu_target=sh4 ;;
2378 sh3e*) sh_cpu_target=sh3e ;;
2379 sh*-*-netbsd* | sh3*) sh_cpu_target=sh3 ;;
2380 sh2a_single_only*) sh_cpu_target=sh2a-single-only ;;
2381 sh2a_single*) sh_cpu_target=sh2a-single ;;
2382 sh2a_nofpu*) sh_cpu_target=sh2a-nofpu ;;
2383 sh2a*) sh_cpu_target=sh2a ;;
2384 sh2e*) sh_cpu_target=sh2e ;;
2385 sh2*) sh_cpu_target=sh2 ;;
2386 *) sh_cpu_target=sh1 ;;
2388 # did the user say --without-fp ?
2389 if test x$with_fp = xno; then
2390 case ${sh_cpu_target} in
2391 sh5-*media) sh_cpu_target=${sh_cpu_target}-nofpu ;;
2393 sh4a* ) sh_cpu_target=sh4a-nofpu ;;
2394 sh4*) sh_cpu_target=sh4-nofpu ;;
2395 sh3*) sh_cpu_target=sh3 ;;
2396 sh2a*) sh_cpu_target=sh2a-nofpu ;;
2397 sh2*) sh_cpu_target=sh2 ;;
2398 *) echo --without-fp not available for $target: ignored
2400 tm_defines="$tm_defines STRICT_NOFPU=1"
2402 sh_cpu_default="`echo $with_cpu|sed s/^m/sh/|tr A-Z_ a-z-`"
2403 case $sh_cpu_default in
2404 sh5-64media-nofpu | sh5-64media | \
2405 sh5-32media-nofpu | sh5-32media | sh5-compact-nofpu | sh5-compact | \
2406 sh2a-single-only | sh2a-single | sh2a-nofpu | sh2a | \
2407 sh4a-single-only | sh4a-single | sh4a-nofpu | sh4a | sh4al | \
2408 sh4-single-only | sh4-single | sh4-nofpu | sh4 | sh4-300 | \
2409 sh3e | sh3 | sh2e | sh2 | sh1) ;;
2410 "") sh_cpu_default=${sh_cpu_target} ;;
2411 *) echo "with_cpu=$with_cpu not supported"; exit 1 ;;
2413 sh_multilibs=${with_multilib_list}
2414 if test "$sh_multilibs" = "default" ; then
2416 sh64-superh-linux* | \
2417 sh[1234]*) sh_multilibs=${sh_cpu_target} ;;
2418 sh64* | sh5*) sh_multilibs=m5-32media,m5-32media-nofpu,m5-compact,m5-compact-nofpu,m5-64media,m5-64media-nofpu ;;
2419 sh-superh-*) sh_multilibs=m4,m4-single,m4-single-only,m4-nofpu ;;
2420 sh*-*-linux*) sh_multilibs=m1,m3e,m4 ;;
2421 sh*-*-netbsd*) sh_multilibs=m3,m3e,m4 ;;
2422 *) sh_multilibs=m1,m2,m2e,m4,m4-single,m4-single-only,m2a,m2a-single ;;
2424 if test x$with_fp = xno; then
2425 sh_multilibs="`echo $sh_multilibs|sed -e s/m4/sh4-nofpu/ -e s/,m4-[^,]*//g -e s/,m[23]e// -e s/m2a,m2a-single/m2a-nofpu/ -e s/m5-..m....,//g`"
2428 target_cpu_default=SELECT_`echo ${sh_cpu_default}|tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`
2429 tm_defines=${tm_defines}' SH_MULTILIB_CPU_DEFAULT=\"'`echo $sh_cpu_default|sed s/sh/m/`'\"'
2430 tm_defines="$tm_defines SUPPORT_`echo $sh_cpu_default | sed 's/^m/sh/' | tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`=1"
2431 sh_multilibs=`echo $sh_multilibs | sed -e 's/,/ /g' -e 's/^[Ss][Hh]/m/' -e 's/ [Ss][Hh]/ m/g' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz-`
2432 for sh_multilib in ${sh_multilibs}; do
2433 case ${sh_multilib} in
2434 m1 | m2 | m2e | m3 | m3e | \
2435 m4 | m4-single | m4-single-only | m4-nofpu | m4-300 |\
2436 m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al | \
2437 m2a | m2a-single | m2a-single-only | m2a-nofpu | \
2438 m5-64media | m5-64media-nofpu | \
2439 m5-32media | m5-32media-nofpu | \
2440 m5-compact | m5-compact-nofpu)
2441 # TM_MULTILIB_CONFIG is used by t-sh for the non-endian multilib definition
2442 # It is passed to MULTIILIB_OPTIONS verbatim.
2443 TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG}/${sh_multilib}"
2444 tm_defines="$tm_defines SUPPORT_`echo $sh_multilib | sed 's/^m/sh/' | tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`=1"
2446 \!*) # TM_MULTILIB_EXCEPTIONS_CONFIG is used by t-sh
2447 # It is passed the MULTILIB_EXCEPTIONS verbatim.
2448 TM_MULTILIB_EXCEPTIONS_CONFIG="${TM_MULTILIB_EXCEPTIONS_CONFIG} `echo $sh_multilib | sed 's/^!//'`" ;;
2450 echo "with_multilib_list=${sh_multilib} not supported."
2455 TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's:^/::'`
2456 if test x${enable_incomplete_targets} = xyes ; then
2457 tm_defines="$tm_defines SUPPORT_SH1=1 SUPPORT_SH2E=1 SUPPORT_SH4=1 SUPPORT_SH4_SINGLE=1 SUPPORT_SH2A=1 SUPPORT_SH2A_SINGLE=1 SUPPORT_SH5_32MEDIA=1 SUPPORT_SH5_32MEDIA_NOFPU=1 SUPPORT_SH5_64MEDIA=1 SUPPORT_SH5_64MEDIA_NOFPU=1"
2459 tm_file="$tm_file ./sysroot-suffix.h"
2460 tmake_file="$tmake_file t-sysroot-suffix"
2463 tmake_file="sh/t-sh sh/t-elf t-rtems sh/t-rtems"
2464 tm_file="${tm_file} dbxelf.h elfos.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h newlib-stdint.h"
2467 tmake_file="$tmake_file sh/t-sh sh/t-elf sh/t-vxworks"
2468 tm_file="${tm_file} elfos.h sh/elf.h sh/embed-elf.h vx-common.h vxworks.h sh/vxworks.h"
2471 tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp-elf.h"
2474 tmake_file="sparc/t-leon"
2477 tmake_file="sparc/t-leon3"
2480 tmake_file="sparc/t-elf"
2485 tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/sp-elf.h sparc/rtemself.h rtems.h newlib-stdint.h"
2486 tmake_file="sparc/t-elf t-rtems"
2489 tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h gnu-user.h linux.h glibc-stdint.h"
2490 extra_options="${extra_options} sparc/long-double-switch.opt"
2493 tmake_file="${tmake_file} sparc/t-leon"
2496 tmake_file="${tmake_file} sparc/t-leon3"
2499 tmake_file="${tmake_file} sparc/t-linux"
2502 if test x$enable_targets = xall; then
2503 tm_file="sparc/biarch64.h ${tm_file} sparc/linux64.h"
2504 tmake_file="${tmake_file} sparc/t-linux64"
2506 tm_file="${tm_file} sparc/linux.h"
2508 tmake_file="${tmake_file} sparc/t-crtfm"
2511 tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
2512 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
2513 extra_options="${extra_options} sparc/long-double-switch.opt"
2516 tm_file="sparc/biarch64.h ${tm_file} ${sol2_tm_file} sol2-bi.h"
2518 sparc64-*-* | sparcv9-*-*)
2519 tm_file="sparc/sol2-64.h ${tm_file}"
2522 test x$with_cpu != x || with_cpu=v9
2525 tmake_file="${tmake_file} sparc/t-sol2-64"
2528 tm_file="${tm_file} elfos.h sparc/sysv4.h vx-common.h vxworks.h sparc/vxworks.h"
2529 tmake_file="${tmake_file} sparc/t-vxworks"
2532 tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp64-elf.h"
2533 extra_options="${extra_options} sparc/little-endian.opt"
2536 tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp64-elf.h sparc/rtemself.h rtems.h"
2537 extra_options="${extra_options} sparc/little-endian.opt"
2538 tmake_file="${tmake_file} t-rtems"
2541 tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h sparc/sysv4.h gnu-user.h linux.h glibc-stdint.h sparc/linux64.h"
2542 extra_options="${extra_options} sparc/long-double-switch.opt"
2543 tmake_file="${tmake_file} sparc/t-linux sparc/t-linux64 sparc/t-crtfm"
2545 sparc64-*-freebsd*|ultrasparc-*-freebsd*)
2546 tm_file="${tm_file} ${fbsd_tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/freebsd.h"
2547 extra_options="${extra_options} sparc/long-double-switch.opt"
2548 tmake_file="${tmake_file} sparc/t-crtfm"
2549 case "x$with_cpu" in
2551 x) with_cpu=ultrasparc ;;
2552 *) echo "$with_cpu not supported for freebsd target"; exit 1 ;;
2556 tm_file="sparc/biarch64.h ${tm_file}"
2557 tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
2558 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
2559 extra_options="${extra_options} sparc/long-double-switch.opt"
2560 tmake_file="${tmake_file} sparc/t-netbsd64"
2563 tm_file="sparc/openbsd1-64.h ${tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/sp64-elf.h"
2564 tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h sparc/openbsd64.h"
2565 extra_options="${extra_options} openbsd.opt"
2566 extra_options="${extra_options} sparc/little-endian.opt"
2571 tm_file="dbxelf.h elfos.h spu/spu-elf.h spu/spu.h newlib-stdint.h"
2572 tmake_file="spu/t-spu-elf"
2573 extra_headers="spu_intrinsics.h spu_internals.h vmx2spu.h spu_mfcio.h vec_types.h spu_cache.h"
2574 extra_modes=spu/spu-modes.def
2575 c_target_objs="${c_target_objs} spu-c.o"
2576 cxx_target_objs="${cxx_target_objs} spu-c.o"
2582 target_cpu_default="TARGET_CPU_v850e2v3"
2585 target_cpu_default="TARGET_CPU_v850e2"
2587 v850e1-*-* | v850es-*-*)
2588 target_cpu_default="TARGET_CPU_v850e1"
2591 target_cpu_default="TARGET_CPU_v850e"
2594 target_cpu_default="TARGET_CPU_generic"
2597 tm_file="dbxelf.h elfos.h newlib-stdint.h v850/v850.h"
2598 if test x$stabs = xyes
2600 tm_file="${tm_file} dbx.h"
2603 c_target_objs="v850-c.o"
2604 cxx_target_objs="v850-c.o"
2608 tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h vax/elf.h vax/linux.h"
2609 extra_options="${extra_options} vax/elf.opt"
2610 tmake_file="${tmake_file} vax/t-linux"
2613 tm_file="${tm_file} elfos.h netbsd.h netbsd-elf.h vax/elf.h vax/netbsd-elf.h"
2614 extra_options="${extra_options} netbsd.opt netbsd-elf.opt vax/elf.opt"
2617 tm_file="vax/vax.h vax/openbsd1.h openbsd.h openbsd-stdint.h openbsd-pthread.h vax/openbsd.h"
2618 extra_options="${extra_options} openbsd.opt"
2622 # For historical reasons, the target files omit the 'x'.
2623 tm_file="dbxelf.h elfos.h newlib-stdint.h stormy16/stormy16.h"
2624 tm_p_file=stormy16/stormy16-protos.h
2625 md_file=stormy16/stormy16.md
2626 out_file=stormy16/stormy16.c
2627 extra_options=stormy16/stormy16.opt
2628 tmake_file="stormy16/t-stormy16"
2629 extra_parts="crtbegin.o crtend.o"
2632 tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h xtensa/elf.h"
2633 extra_options="${extra_options} xtensa/elf.opt"
2634 tmake_file="xtensa/t-xtensa xtensa/t-elf"
2637 tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h xtensa/linux.h"
2638 tmake_file="${tmake_file} xtensa/t-xtensa xtensa/t-linux"
2641 tm_file="mn10300/mn10300.h dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h mn10300/linux.h"
2642 tmake_file="${tmake_file} mn10300/t-linux"
2644 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
2648 tm_file="dbxelf.h elfos.h ${tm_file} m32c/rtems.h rtems.h newlib-stdint.h"
2649 tmake_file="${tmake_file} t-rtems"
2650 c_target_objs="m32c-pragma.o"
2651 cxx_target_objs="m32c-pragma.o"
2654 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
2655 c_target_objs="m32c-pragma.o"
2656 cxx_target_objs="m32c-pragma.o"
2659 echo "*** Configuration ${target} not supported" 1>&2
2665 i[34567]86-*-linux* | x86_64-*-linux*)
2666 tmake_file="${tmake_file} i386/t-pmm_malloc i386/t-i386"
2668 i[34567]86-*-* | x86_64-*-*)
2669 tmake_file="${tmake_file} i386/t-gmm_malloc i386/t-i386"
2671 powerpc*-*-* | rs6000-*-*)
2672 tm_file="${tm_file} rs6000/option-defaults.h"
2675 if [ "$target_has_targetcm" = "no" ]; then
2676 c_target_objs="$c_target_objs default-c.o"
2677 cxx_target_objs="$cxx_target_objs default-c.o"
2680 if [ "$common_out_file" = "" ]; then
2681 if [ "$target_has_targetm_common" = "yes" ]; then
2682 common_out_file="$cpu_type/$cpu_type-common.c"
2684 common_out_file="default-common.c"
2688 # Support for --with-cpu and related options (and a few unrelated options,
2692 echo "--with-cpu must be passed a value" 1>&2
2697 # Set arch and cpu from ${target} and ${target_noncanonical}. Set cpu
2698 # to generic if there is no processor scheduler model for the target.
2701 arch_without_sse2=no
2702 arch_without_64bit=no
2705 if test $fbsd_major -ge 6; then
2711 arch_without_sse2=yes
2712 arch_without_64bit=yes
2717 arch_without_sse2=yes
2718 arch_without_64bit=yes
2723 arch_without_sse2=yes
2724 arch_without_64bit=yes
2727 arch_without_sse2=yes
2728 arch_without_64bit=yes
2729 case ${target_noncanonical} in
2742 pentium_mmx-*|winchip_c6-*|winchip2-*|c3-*)
2752 i686-*-* | i786-*-*)
2753 case ${target_noncanonical} in
2762 amdfam10-*|barcelona-*)
2766 k8_sse3-*|opteron_sse3-*|athlon64_sse3-*)
2770 k8-*|opteron-*|athlon64-*|athlon_fx-*)
2774 athlon_xp-*|athlon_mp-*|athlon_4-*)
2777 arch_without_sse2=yes
2778 arch_without_64bit=yes
2780 athlon_tbird-*|athlon-*)
2783 arch_without_sse2=yes
2788 arch_without_sse2=yes
2793 arch_without_sse2=yes
2795 pentium3-*|pentium3m-*)
2798 arch_without_sse2=yes
2800 pentium4-*|pentium4m-*)
2835 arch_without_sse2=yes
2840 arch_without_sse2=yes
2841 arch_without_64bit=yes
2846 case ${target_noncanonical} in
2855 amdfam10-*|barcelona-*)
2859 k8_sse3-*|opteron_sse3-*|athlon64_sse3-*)
2863 k8-*|opteron-*|athlon_64-*)
2891 # If there is no $with_cpu option, try to infer one from ${target}.
2892 # This block sets nothing except for with_cpu.
2893 if test x$with_cpu = x ; then
2895 i[34567]86-*-*|x86_64-*-*)
2913 frv-*-*linux* | frv400-*-*linux*)
2920 case "$with_arch" in
2922 with_cpu=${default_cf_cpu}
2925 with_cpu=m${default_m68k_cpu}
2936 with_cpu="`echo ${target} | sed 's/-.*$//'`"
2940 # Avoid overriding --with-cpu-32 and --with-cpu-64 values.
2942 i[34567]86-*-*|x86_64-*-*)
2943 if test x$with_cpu_32 != x || test x$with_cpu_64 != x; then
2944 if test x$with_cpu_32 = x; then
2945 with_cpu_32=$with_cpu
2947 if test x$with_cpu_64 = x; then
2948 with_cpu_64=$with_cpu
2956 # Support for --with-arch and related options (and a few unrelated options,
2958 case ${with_arch} in
2960 echo "--with-arch must be passed a value" 1>&2
2965 # If there is no $with_arch option, try to infer one from ${target}.
2966 # This block sets nothing except for with_arch.
2967 if test x$with_arch = x ; then
2969 i[34567]86-*-darwin*|x86_64-*-darwin*)
2970 # Default arch is set via TARGET_SUBTARGET32_ISA_DEFAULT
2971 # and TARGET_SUBTARGET64_ISA_DEFAULT in config/i386/darwin.h.
2974 # --with-fpmath sets the default ISA to SSE2, which is the same
2975 # ISA supported by Pentium 4.
2976 if test x$with_fpmath = x || test $arch_without_sse2 = no; then
2987 # Avoid overriding --with-arch-32 and --with-arch-64 values.
2989 i[34567]86-*-darwin*|x86_64-*-darwin*)
2990 # Default arch is set via TARGET_SUBTARGET32_ISA_DEFAULT
2991 # and TARGET_SUBTARGET64_ISA_DEFAULT in config/i386/darwin.h.
2993 i[34567]86-*-*|x86_64-*-*)
2994 if test x$with_arch_32 != x || test x$with_arch_64 != x; then
2995 if test x$with_arch_32 = x; then
2996 with_arch_32=$with_arch
2998 if test x$with_arch_64 = x; then
2999 if test $arch_without_64bit = yes; then
3000 # Set the default 64bit arch to x86-64 if the default arch
3001 # doesn't support 64bit.
3004 with_arch_64=$with_arch
3008 elif test $arch_without_64bit$need_64bit_isa = yesyes; then
3009 # Set the default 64bit arch to x86-64 if the default arch
3010 # doesn't support 64bit and we need 64bit ISA.
3011 with_arch_32=$with_arch
3019 # Support --with-fpmath.
3020 if test x$with_fpmath != x; then
3022 i[34567]86-*-* | x86_64-*-*)
3023 case ${with_fpmath} in
3025 tm_file="${tm_file} i386/avxmath.h"
3028 tm_file="${tm_file} i386/ssemath.h"
3031 echo "Invalid --with-fpmath=$with_fpmath" 1>&2
3037 echo "--with-fpmath isn't supported for $target." 1>&2
3043 # Similarly for --with-schedule.
3044 if test x$with_schedule = x; then
3047 # Override default PA8000 scheduling model.
3048 with_schedule=7100LC
3053 # Validate and mark as valid any --with options supported
3054 # by this target. In order to use a particular --with option
3055 # you must list it in supported_defaults; validating the value
3056 # is optional. This case statement should set nothing besides
3057 # supported_defaults.
3062 supported_defaults="cpu tune"
3063 for which in cpu tune; do
3064 eval "val=\$with_$which"
3067 | ev4 | ev45 | 21064 | ev5 | 21164 | ev56 | 21164a \
3068 | pca56 | 21164PC | 21164pc | ev6 | 21264 | ev67 \
3072 echo "Unknown CPU used in --with-$which=$val" 1>&2
3080 supported_defaults="arch cpu float tune fpu abi mode tls"
3081 for which in cpu tune; do
3082 # See if it matches any of the entries in arm-cores.def
3083 eval "val=\$with_$which"
3084 if [ x"$val" = x ] \
3085 || grep "^ARM_CORE(\"$val\"," \
3086 ${srcdir}/config/arm/arm-cores.def \
3089 new_val=`grep "^ARM_CORE(\"$val\"," \
3090 ${srcdir}/config/arm/arm-cores.def | \
3091 sed -e 's/^[^,]*,[ ]*//' | \
3093 eval "target_${which}_cname=$new_val"
3094 echo "For $val real value is $new_val"
3097 echo "Unknown CPU used in --with-$which=$val" 1>&2
3102 case "$with_arch" in
3104 | armv[23456] | armv2a | armv3m | armv4t | armv5t \
3105 | armv5te | armv6j |armv6k | armv6z | armv6zk | armv6-m \
3106 | armv7 | armv7-a | armv7-r | armv7-m \
3111 echo "Unknown arch used in --with-arch=$with_arch" 1>&2
3116 case "$with_float" in
3118 | soft | hard | softfp)
3122 echo "Unknown floating point type used in --with-float=$with_float" 1>&2
3129 | fpa | fpe2 | fpe3 | maverick | vfp | vfp3 | vfpv3 \
3130 | vfpv3-fp16 | vfpv3-d16 | vfpv3-d16-fp16 | vfpv3xd \
3131 | vfpv3xd-fp16 | neon | neon-fp16 | vfpv4 | vfpv4-d16 \
3132 | fpv4-sp-d16 | neon-vfpv4)
3136 echo "Unknown fpu used in --with-fpu=$with_fpu" 2>&1
3143 | apcs-gnu | atpcs | aapcs | iwmmxt | aapcs-linux )
3147 echo "Unknown ABI used in --with-abi=$with_abi"
3152 case "$with_mode" in
3158 echo "Unknown mode used in --with-mode=$with_mode"
3169 echo "Unknown TLS method used in --with-tls=$with_tls" 1>&2
3174 if test "x$with_arch" != x && test "x$with_cpu" != x; then
3175 echo "Warning: --with-arch overrides --with-cpu=$with_cpu" 1>&2
3180 supported_defaults=cpu
3185 echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
3191 fido-*-* | m68k*-*-*)
3192 supported_defaults="arch cpu"
3193 case "$with_arch" in
3195 m68k_arch_family="$with_arch"
3198 echo "Invalid --with-arch=$with_arch" 1>&2
3203 # We always have a $with_cpu setting here.
3205 "m68000" | "m68010" | "m68020" | "m68030" | "m68040" | "m68060")
3206 m68k_cpu_ident=$with_cpu
3209 m68k_cpu_ident=m68020
3210 tm_defines="$tm_defines M68K_DEFAULT_TUNE=u68020_40"
3213 m68k_cpu_ident=m68020
3214 tm_defines="$tm_defines M68K_DEFAULT_TUNE=u68020_60"
3217 # We need the C identifier rather than the string.
3218 m68k_cpu_ident=`awk -v arg="\"$with_cpu\"" \
3219 'BEGIN { FS="[ \t]*[,()][ \t]*" }; \
3220 $1 == "M68K_DEVICE" && $2 == arg { print $3 }' \
3221 ${srcdir}/config/m68k/m68k-devices.def`
3222 if [ x"$m68k_cpu_ident" = x ] ; then
3223 echo "Unknown CPU used in --with-cpu=$with_cpu" 1>&2
3226 with_cpu="mcpu=$with_cpu"
3232 supported_defaults="arch schedule"
3234 case "$with_arch" in
3235 "" | 1.0 | 1.1 | 2.0)
3239 echo "Unknown architecture used in --with-arch=$with_arch" 1>&2
3244 case "$with_schedule" in
3245 "" | 700 | 7100 | 7100LC | 7200 | 7300 | 8000)
3249 echo "Unknown processor used in --with-schedule=$with_schedule." 1>&2
3255 i[34567]86-*-* | x86_64-*-*)
3256 supported_defaults="arch arch_32 arch_64 cpu cpu_32 cpu_64 tune tune_32 tune_64"
3257 for which in arch arch_32 arch_64 cpu cpu_32 cpu_64 tune tune_32 tune_64; do
3258 eval "val=\$with_$which"
3261 | i586 | pentium | pentium-mmx | winchip-c6 | winchip2 \
3262 | c3 | c3-2 | i686 | pentiumpro | pentium2 | pentium3 \
3263 | pentium4 | k6 | k6-2 | k6-3 | athlon | athlon-tbird \
3264 | athlon-4 | athlon-xp | athlon-mp | geode \
3265 | prescott | pentium-m | pentium4m | pentium3m)
3272 echo "CPU given in --with-$which=$val doesn't support 64bit mode." 1>&2
3280 "" | x86-64 | generic | native \
3281 | k8 | k8-sse3 | athlon64 | athlon64-sse3 | opteron \
3282 | opteron-sse3 | athlon-fx | bdver1 | btver1 | amdfam10 \
3283 | barcelona | nocona | core2 | corei7 | corei7-avx | atom)
3287 echo "Unknown CPU given in --with-$which=$val." 1>&2
3295 supported_defaults="abi arch arch_32 arch_64 float tune tune_32 tune_64 divide llsc mips-plt synci"
3297 case ${with_float} in
3302 echo "Unknown floating point type used in --with-float=$with_float" 1>&2
3308 "" | 32 | o64 | n32 | 64 | eabi)
3312 echo "Unknown ABI used in --with-abi=$with_abi" 1>&2
3317 case ${with_divide} in
3318 "" | breaks | traps)
3322 echo "Unknown division check type use in --with-divide=$with_divide" 1>&2
3327 case ${with_llsc} in
3338 echo "Unknown llsc type used in --with-llsc" 1>&2
3343 case ${with_mips_plt} in
3348 with_mips_plt=no-plt
3353 echo "Unknown --with-mips-plt argument: $with_mips_plt" 1>&2
3358 case ${with_synci} in
3363 # No is the default.
3367 echo "Unknown synci type used in --with-synci" 1>&2
3373 powerpc*-*-* | rs6000-*-*)
3374 supported_defaults="cpu cpu_32 cpu_64 float tune tune_32 tune_64"
3376 for which in cpu cpu_32 cpu_64 tune tune_32 tune_64; do
3377 eval "val=\$with_$which"
3379 default32 | default64)
3384 echo "$val only valid for --with-cpu and --with-tune." 1>&2
3388 with_which="with_$which"
3392 tm_defines="${tm_defines} CONFIG_PPC405CR"
3393 eval "with_$which=405"
3396 | power | power[234567] | power6x | powerpc | powerpc64 \
3397 | rios | rios1 | rios2 | rsc | rsc1 | rs64a \
3398 | 401 | 403 | 405 | 405fp | 440 | 440fp | 464 | 464fp \
3399 | 476 | 476fp | 505 | 601 | 602 | 603 | 603e | ec603e \
3400 | 604 | 604e | 620 | 630 | 740 | 750 | 7400 | 7450 \
3401 | a2 | e300c[23] | 854[08] | e500mc | e500mc64 | titan\
3402 | 801 | 821 | 823 | 860 | 970 | G3 | G4 | G5 | cell)
3406 echo "Unknown cpu used in --with-$which=$val." 1>&2
3414 supported_defaults="arch mode tune"
3416 for which in arch tune; do
3417 eval "val=\$with_$which"
3419 "" | g5 | g6 | z900 | z990 | z9-109 | z9-ec | z10 | z196)
3423 echo "Unknown cpu used in --with-$which=$val." 1>&2
3429 case ${with_mode} in
3434 echo "Unknown architecture mode used in --with-mode=$with_mode." 1>&2
3440 sh[123456ble]-*-* | sh-*-*)
3441 supported_defaults="cpu"
3442 case "`echo $with_cpu | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz- | sed s/sh/m/`" in
3443 "" | m1 | m2 | m2e | m3 | m3e | m4 | m4-single | m4-single-only | m4-nofpu )
3446 m2a | m2a-single | m2a-single-only | m2a-nofpu)
3448 m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al)
3451 echo "Unknown CPU used in --with-cpu=$with_cpu, known values:" 1>&2
3452 echo "m1 m2 m2e m3 m3e m4 m4-single m4-single-only m4-nofpu" 1>&2
3453 echo "m4a m4a-single m4a-single-only m4a-nofpu m4al" 1>&2
3454 echo "m2a m2a-single m2a-single-only m2a-nofpu" 1>&2
3460 supported_defaults="cpu float tune"
3462 for which in cpu tune; do
3463 eval "val=\$with_$which"
3465 "" | sparc | sparcv9 | sparc64 \
3467 | v8 | supersparc | hypersparc | leon \
3468 | sparclite | f930 | f934 | sparclite86x \
3469 | sparclet | tsc701 \
3470 | v9 | ultrasparc | ultrasparc3 | niagara | niagara2)
3474 echo "Unknown cpu used in --with-$which=$val" 1>&2
3480 case ${with_float} in
3485 echo "Unknown floating point type used in --with-float=$with_float" 1>&2
3492 supported_defaults="arch tune"
3494 for which in arch tune; do
3495 eval "val=\$with_$which"
3497 "" | cell | celledp)
3501 echo "Unknown cpu used in --with-$which=$val." 1>&2
3509 supported_defaults=cpu
3511 "" | v850e | v850e1 | v850e2 | v850es | v850e2v3)
3515 echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
3522 # Set some miscellaneous flags for particular targets.
3523 target_cpu_default2=
3526 if test x$gas = xyes
3528 target_cpu_default2="MASK_GAS"
3533 if test x$target_cpu_cname = x
3535 target_cpu_default2=TARGET_CPU_generic
3537 target_cpu_default2=TARGET_CPU_$target_cpu_cname
3542 target_cpu_default2="MASK_BIG_SWITCH"
3543 if test x$gas = xyes
3545 target_cpu_default2="${target_cpu_default2}|MASK_GAS|MASK_JUMP_IN_DELAY"
3549 fido*-*-* | m68k*-*-*)
3550 target_cpu_default2=$m68k_cpu_ident
3551 tmake_file="m68k/t-opts $tmake_file"
3552 if [ x"$m68k_arch_family" != x ]; then
3553 tmake_file="m68k/t-$m68k_arch_family $tmake_file"
3557 i[34567]86-*-darwin* | x86_64-*-darwin*)
3558 tmake_file="${tmake_file} i386/t-fprules-softfp soft-fp/t-softfp"
3560 i[34567]86-*-linux* | x86_64-*-linux* | \
3561 i[34567]86-*-kfreebsd*-gnu | x86_64-*-kfreebsd*-gnu | \
3563 tmake_file="${tmake_file} i386/t-fprules-softfp soft-fp/t-softfp i386/t-linux"
3565 i[34567]86-*-solaris2* | x86_64-*-solaris2.1[0-9]*)
3566 tmake_file="${tmake_file} i386/t-fprules-softfp soft-fp/t-softfp"
3568 i[34567]86-*-cygwin* | i[34567]86-*-mingw* | x86_64-*-mingw*)
3569 tmake_file="${tmake_file} i386/t-fprules-softfp soft-fp/t-softfp"
3571 i[34567]86-*-freebsd* | x86_64-*-freebsd*)
3572 tmake_file="${tmake_file} i386/t-fprules-softfp soft-fp/t-softfp"
3575 tmake_file="${tmake_file} ia64/t-fprules-softfp soft-fp/t-softfp"
3579 if test x$gnu_ld = xyes
3581 target_cpu_default2="MASK_SPLIT_ADDRESSES"
3585 tm_defines="TARGET_ENDIAN_DEFAULT=0 $tm_defines"
3588 tmake_file="mips/t-mips $tmake_file"
3591 powerpc*-*-* | rs6000-*-*)
3592 # FIXME: The PowerPC port uses the value set at compile time,
3593 # although it's only cosmetic.
3594 if test "x$with_cpu" != x
3596 target_cpu_default2="\\\"$with_cpu\\\""
3598 out_file=rs6000/rs6000.c
3599 c_target_objs="${c_target_objs} rs6000-c.o"
3600 cxx_target_objs="${cxx_target_objs} rs6000-c.o"
3601 tmake_file="rs6000/t-rs6000 ${tmake_file}"
3603 if test x$enable_e500_double = xyes
3605 tm_file="$tm_file rs6000/e500-double.h"
3609 sh[123456ble]*-*-* | sh-*-*)
3610 c_target_objs="${c_target_objs} sh-c.o"
3611 cxx_target_objs="${cxx_target_objs} sh-c.o"
3615 if test x$with_tune = x ; then
3619 # The SPARC port checks this value at compile-time.
3620 target_cpu_default2="TARGET_CPU_$with_cpu"
3624 # Some standard aliases.
3629 xsparcv9 | xsparc64)
3634 # The SPARC port checks this value at compile-time.
3635 target_cpu_default2="TARGET_CPU_$with_cpu"
3639 case "x$with_cpu" in
3642 xv850e | xv850e1 | xv850e2 | xv850e2v3)
3643 target_cpu_default2="TARGET_CPU_$with_cpu"
3646 target_cpu_default2="TARGET_CPU_v850e1"
3653 all_defaults="abi cpu cpu_32 cpu_64 arch arch_32 arch_64 tune tune_32 tune_64 schedule float mode fpu divide llsc mips-plt synci tls"
3654 for option in $all_defaults
3656 eval "val=\$with_"`echo $option | sed s/-/_/g`
3657 if test -n "$val"; then
3658 case " $supported_defaults " in
3662 echo "This target does not support --with-$option." 2>&1
3663 echo "Valid --with options are: $supported_defaults" 2>&1
3670 t="{ \"$option\", \"$val\" }"
3672 t="${t}, { \"$option\", \"$val\" }"
3679 configure_default_options="{ { NULL, NULL} }"
3681 configure_default_options="{ ${t} }"
3684 if test "$target_cpu_default2" != ""
3686 if test "$target_cpu_default" != ""
3688 target_cpu_default="(${target_cpu_default}|${target_cpu_default2})"
3690 target_cpu_default=$target_cpu_default2