# It's normally the absolute path to the current directory.
objdir = @objdir@
+host_subdir=@host_subdir@
build_subdir=@build_subdir@
+ifeq ($(host_subdir),.)
+build_objdir := ../$(build_subdir)
+else
+build_objdir := ../../$(build_subdir)
+endif
+
# --------
# Defined vpaths
# --------
build/insn-conditions.o-warn = -Wno-error
# Bison-1.75 output often yields (harmless) -Wtraditional warnings
build/gengtype-yacc.o-warn = -Wno-error
-c-parse.o-warn = -Wno-error
# flex output may yield harmless "no previous prototype" warnings
build/gengtype-lex.o-warn = -Wno-error
# SYSCALLS.c misses prototypes
OBJC_BOEHM_GC=@objc_boehm_gc@
GTHREAD_FLAGS=@gthread_flags@
extra_modes_file=@extra_modes_file@
+extra_opt_files=@extra_opt_files@
host_hook_obj=@out_host_hook_obj@
-# Be prepared for gcc2 merges.
-gcc_version=@gcc_version@
-gcc_version_trigger=@gcc_version_trigger@
-version=$(gcc_version)
# ------------------------
# Installation directories
GTM_H = tm.h $(tm_file_list)
TM_H = $(GTM_H) insn-constants.h insn-flags.h
+# Variables for version information.
+BASEVER := $(srcdir)/BASE-VER # 4.x.y
+DEVPHASE := $(srcdir)/DEV-PHASE # experimental, prerelease, ""
+DATESTAMP := $(srcdir)/DATESTAMP # YYYYMMDD or empty
+
+BASEVER_c := $(shell cat $(BASEVER))
+DEVPHASE_c := $(shell cat $(DEVPHASE))
+DATESTAMP_c := $(shell cat $(DATESTAMP))
+
+version := $(BASEVER_c)
+
+# For use in version.c - double quoted strings, with appropriate
+# surrounding punctuation and spaces, and with the datestamp and
+# development phase collapsed to the empty string in release mode
+# (i.e. if DEVPHASE_c is empty). The space immediately after the
+# comma in the $(if ...) constructs is significant - do not remove it.
+BASEVER_s := "\"$(BASEVER_c)\""
+DEVPHASE_s := "\"$(if $(DEVPHASE_c), ($(DEVPHASE_c)))\""
+DATESTAMP_s := "\"$(if $(DEVPHASE_c), $(DATESTAMP_c))\""
+
+# Shorthand variables for dependency lists.
TARGET_H = $(TM_H) target.h insn-modes.h
MACHMODE_H = machmode.h mode-classes.def insn-modes.h
HOOKS_H = hooks.h $(MACHMODE_H)
# Build and host support libraries.
LIBIBERTY = ../libiberty/libiberty.a
-BUILD_LIBIBERTY = ../$(build_subdir)/libiberty/libiberty.a
+BUILD_LIBIBERTY = $(build_objdir)/libiberty/libiberty.a
# Dependencies on the intl and portability libraries.
LIBDEPS= $(CPPLIB) $(LIBIBERTY) $(LIBINTL_DEP) $(LIBICONV_DEP)
#\f
# Lists of files for various purposes.
+# All option source files
+ALL_OPT_FILES=$(lang_opt_files) $(extra_opt_files)
+
# Target specific, C specific object file
C_TARGET_OBJS=@c_target_objs@
C_AND_OBJC_OBJS = attribs.o c-errors.o c-lex.o c-pragma.o c-decl.o c-typeck.o \
c-convert.o c-aux-info.o c-common.o c-opts.o c-format.o c-semantics.o \
c-incpath.o cppdefault.o c-ppoutput.o c-cppbuiltin.o prefix.o \
- c-objc-common.o c-dump.o c-pch.o $(C_TARGET_OBJS) \
+ c-objc-common.o c-dump.o c-pch.o c-parser.o $(C_TARGET_OBJS) \
c-gimplify.o tree-mudflap.o c-pretty-print.o
# Language-specific object files for C.
-C_OBJS = c-parse.o c-lang.o stub-objc.o $(C_AND_OBJC_OBJS)
+C_OBJS = c-lang.o stub-objc.o $(C_AND_OBJC_OBJS)
# Language-independent object files.
OBJS-common = \
tree-ssa-dom.o domwalk.o tree-tailcall.o gimple-low.o tree-iterator.o \
tree-phinodes.o tree-ssanames.o tree-sra.o tree-complex.o tree-ssa-loop.o \
tree-ssa-loop-niter.o tree-ssa-loop-manip.o tree-ssa-threadupdate.o \
- tree-vectorizer.o tree-ssa-loop-ivcanon.o tree-ssa-propagate.o \
+ tree-vectorizer.o tree-vect-analyze.o tree-vect-transform.o \
+ tree-ssa-loop-ivcanon.o tree-ssa-propagate.o \
tree-ssa-loop-ivopts.o tree-if-conv.o tree-ssa-loop-unswitch.o \
alias.o bb-reorder.o bitmap.o builtins.o caller-save.o calls.o \
cfg.o cfganal.o cfgbuild.o cfgcleanup.o cfglayout.o cfgloop.o \
varasm.o varray.o vec.o version.o vmsdbgout.o xcoffout.o alloc-pool.o \
et-forest.o cfghooks.o bt-load.o pretty-print.o $(GGC) web.o passes.o \
rtl-profile.o tree-profile.o rtlhooks.o cfgexpand.o lambda-mat.o \
- lambda-trans.o lambda-code.o tree-loop-linear.o
+ lambda-trans.o lambda-code.o tree-loop-linear.o tree-ssa-sink.o
OBJS-md = $(out_object_file)
OBJS-archive = $(EXTRA_OBJS) $(host_hook_obj) tree-inline.o \
# language hooks, generated by configure
@language_hooks@
-# Set up library path if needed.
-@set_gcc_lib_path@
-
# per-language makefile fragments
ifneq ($(LANG_MAKEFRAGS),)
include $(LANG_MAKEFRAGS)
# Rebuilding this configuration
# -----------------------------
-Makefile: config.status $(srcdir)/Makefile.in $(srcdir)/version.c $(LANG_MAKEFRAGS)
+Makefile: config.status $(srcdir)/Makefile.in $(LANG_MAKEFRAGS)
LANGUAGES="$(CONFIG_LANGUAGES)" \
CONFIG_HEADERS= \
CONFIG_SHELL="$(SHELL)" \
# Really, really stupid make features, such as SUN's KEEP_STATE, may force
# a target to build even if it is up-to-date. So we must verify that
# config.status does not exist before failing.
-config.status: $(srcdir)/configure $(srcdir)/config.gcc version.c
+config.status: $(srcdir)/configure $(srcdir)/config.gcc
@if [ ! -f config.status ] ; then \
echo You must configure gcc. Look at http://gcc.gnu.org/install/ for details.; \
false; \
c-errors.o: c-errors.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \
$(C_TREE_H) $(FLAGS_H) $(DIAGNOSTIC_H) $(TM_P_H)
-c-parse.o : c-parse.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \
+c-parser.o : c-parser.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \
$(GGC_H) intl.h $(C_TREE_H) input.h $(FLAGS_H) toplev.h output.h \
- $(CPPLIB_H) varray.h gt-c-parse.h langhooks.h $(C_COMMON_H) $(C_PRAGMA_H)
+ $(CPPLIB_H) varray.h gt-c-parser.h langhooks.h $(C_COMMON_H) $(C_PRAGMA_H)
srcextra: gcc.srcextra lang.srcextra
-gcc.srcextra: c-parse.y c-parse.c gengtype-lex.c gengtype-yacc.c gengtype-yacc.h
+gcc.srcextra: gengtype-lex.c gengtype-yacc.c gengtype-yacc.h
-cp -p $^ $(srcdir)
-c-parse.c: c-parse.y
- -$(BISON) $(BISONFLAGS) -o $@ $<
-
-c-parse.y: c-parse.in
- echo '/*WARNING: This file is automatically generated!*/' >tmp-c-parse.y
- sed -e "/^@@ifobjc.*/,/^@@end_ifobjc.*/d" \
- -e "/^@@ifc.*/d" -e "/^@@end_ifc.*/d" $< >>tmp-c-parse.y
- $(SHELL) $(srcdir)/../move-if-change tmp-c-parse.y $@
-
c-incpath.o: c-incpath.c c-incpath.h $(CONFIG_H) $(SYSTEM_H) $(CPPLIB_H) \
intl.h prefix.h coretypes.h $(TM_H) cppdefault.h $(TARGET_H) \
$(MACHMODE_H)
$(STAMP) s-specs
optionlist: s-options ; @true
-s-options: $(lang_opt_files) Makefile $(srcdir)/opt-gather.awk
- $(AWK) -f $(srcdir)/opt-gather.awk $(lang_opt_files) > tmp-optionlist
+s-options: $(ALL_OPT_FILES) Makefile $(srcdir)/opt-gather.awk
+ $(AWK) -f $(srcdir)/opt-gather.awk $(ALL_OPT_FILES) > tmp-optionlist
$(SHELL) $(srcdir)/../move-if-change tmp-optionlist optionlist
$(STAMP) s-options
-
options.c: optionlist $(srcdir)/opt-functions.awk $(srcdir)/optc-gen.awk
$(AWK) -f $(srcdir)/opt-functions.awk -f $(srcdir)/optc-gen.awk \
-v header_name="options.h" < $< > $@
-options.h: optionlist $(srcdir)/opt-functions.awk $(srcdir)/opth-gen.awk
+options.h: s-options-h ; @true
+s-options-h: optionlist $(srcdir)/opt-functions.awk $(srcdir)/opth-gen.awk
$(AWK) -f $(srcdir)/opt-functions.awk -f $(srcdir)/opth-gen.awk \
- < $< > $@
+ < $< > tmp-options.h
+ $(SHELL) $(srcdir)/../move-if-change tmp-options.h options.h
+ $(STAMP) $@
options.o: options.c options.h opts.h intl.h
dumpvers: dumpvers.c
-version.o: version.c version.h
+version.o: version.c version.h $(DATESTAMP) $(BASEVER) $(DEVPHASE)
+ $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
+ -DBASEVER=$(BASEVER_s) -DDATESTAMP=$(DATESTAMP_s) \
+ -DDEVPHASE=$(DEVPHASE_s) -c $(srcdir)/version.c $(OUTPUT_OPTION)
gtype-desc.o: gtype-desc.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
varray.h $(HASHTAB_H) $(SPLAY_TREE_H) bitmap.h $(TREE_H) $(RTL_H) \
stringpool.o: stringpool.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
$(TREE_H) $(GGC_H) gt-stringpool.h
-prefix.o: prefix.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) Makefile prefix.h
+prefix.o: prefix.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) prefix.h \
+ Makefile $(BASEVER)
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
- -DPREFIX=\"$(prefix)\" \
+ -DPREFIX=\"$(prefix)\" -DBASEVER=$(BASEVER_s) \
-c $(srcdir)/prefix.c $(OUTPUT_OPTION)
convert.o: convert.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) $(FLAGS_H) \
langhooks.h $(C_COMMON_H) tree-inline.h $(CGRAPH_H) intl.h function.h \
pointer-set.h $(TREE_GIMPLE_H) debug.h
print-tree.o : print-tree.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \
- $(GGC_H) langhooks.h real.h
+ $(GGC_H) langhooks.h real.h tree-iterator.h
stor-layout.o : stor-layout.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
$(TREE_H) $(PARAMS_H) $(FLAGS_H) function.h $(EXPR_H) $(RTL_H) toplev.h \
$(GGC_H) $(TM_P_H) $(TARGET_H) langhooks.h $(REGS_H) gt-stor-layout.h
$(RTL_H) $(TREE_H) $(TM_P_H) $(EXPR_H) $(GGC_H) output.h diagnostic.h \
errors.h function.h $(TIMEVAR_H) $(TM_H) coretypes.h $(TREE_DUMP_H) \
$(BASIC_BLOCK_H) domwalk.h real.h tree-pass.h $(FLAGS_H) langhooks.h \
- tree-ssa-propagate.h
+ tree-ssa-propagate.h cfgloop.h
tree-ssa-threadupdate.o : tree-ssa-threadupdate.c $(TREE_FLOW_H) $(CONFIG_H) \
$(SYSTEM_H) $(RTL_H) $(TREE_H) $(TM_P_H) $(EXPR_H) $(GGC_H) output.h \
diagnostic.h errors.h function.h $(TM_H) coretypes.h $(TREE_DUMP_H) \
- $(BASIC_BLOCK_H) $(FLAGS_H) tree-pass.h
+ $(BASIC_BLOCK_H) $(FLAGS_H) tree-pass.h cfgloop.h
tree-ssanames.o : tree-ssanames.c $(CONFIG_H) $(SYSTEM_H) coretypes.h \
$(TM_H) $(TREE_H) varray.h $(GGC_H) gt-tree-ssanames.h $(TREE_FLOW_H)
tree-phinodes.o : tree-phinodes.c $(CONFIG_H) $(SYSTEM_H) coretypes.h \
tree-ssa-pre.o : tree-ssa-pre.c $(TREE_FLOW_H) $(CONFIG_H) \
$(SYSTEM_H) $(TREE_H) $(TM_P_H) $(EXPR_H) \
$(GGC_H) output.h diagnostic.h errors.h toplev.h $(TIMEVAR_H) \
- $(TM_H) coretypes.h $(TREE_DUMP_H) tree-pass.h $(FLAGS_H)
+ $(TM_H) coretypes.h $(TREE_DUMP_H) tree-pass.h $(FLAGS_H) $(CFGLOOP_H)
tree-vn.o : tree-vn.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(GGC_H) \
$(TREE_H) $(TREE_FLOW_H) $(HASHTAB_H) langhooks.h tree-pass.h \
$(TREE_DUMP_H) diagnostic.h
tree-tailcall.o : tree-tailcall.c $(TREE_FLOW_H) $(CONFIG_H) $(SYSTEM_H) \
$(RTL_H) $(TREE_H) $(TM_P_H) function.h $(TM_H) coretypes.h \
$(TREE_DUMP_H) diagnostic.h except.h tree-pass.h $(FLAGS_H) langhooks.h
+tree-ssa-sink.o : tree-ssa-sink.c $(TREE_FLOW_H) $(CONFIG_H) \
+ $(SYSTEM_H) $(TREE_H) $(TM_P_H) $(EXPR_H) \
+ $(GGC_H) output.h diagnostic.h errors.h toplev.h $(TIMEVAR_H) \
+ $(TM_H) coretypes.h $(TREE_DUMP_H) tree-pass.h $(FLAGS_H)
tree-nested.o: tree-nested.c $(CONFIG_H) $(SYSTEM_H) $(TM_H) $(TREE_H) \
$(RTL_H) $(TM_P_H) function.h tree-dump.h tree-inline.h tree-iterator.h \
tree-gimple.h $(CGRAPH_H) $(EXPR_H) langhooks.h $(GGC_H) gt-tree-nested.h
$(GGC_H) output.h diagnostic.h errors.h $(FLAGS_H) \
$(TIMEVAR_H) $(TM_H) coretypes.h $(TREE_DUMP_H) toplev.h function.h \
langhooks.h $(FLAGS_H) $(CGRAPH_H) tree-inline.h tree-mudflap.h $(GGC_H) \
- $(CGRAPH_H) tree-pass.h
+ $(CGRAPH_H) tree-pass.h $(CFGLOOP_H)
c-gimplify.o : c-gimplify.c $(CONFIG_H) $(SYSTEM_H) $(TREE_H) errors.h \
$(C_TREE_H) $(C_COMMON_H) diagnostic.h $(TREE_GIMPLE_H) varray.h $(FLAGS_H) \
langhooks.h toplev.h rtl.h $(TREE_FLOW_H) langhooks-def.h \
errors.h $(GGC_H) $(TREE_H) $(RTL_H) $(BASIC_BLOCK_H) diagnostic.h \
$(TREE_FLOW_H) $(TREE_DUMP_H) $(TIMEVAR_H) cfgloop.h \
tree-data-ref.h $(SCEV_H) tree-pass.h $(LAMBDA_H)
+tree-vect-analyze.o: tree-vect-analyze.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
+ errors.h $(GGC_H) $(OPTABS_H) $(TREE_H) $(RTL_H) $(BASIC_BLOCK_H) diagnostic.h \
+ $(TREE_FLOW_H) $(TREE_DUMP_H) $(TIMEVAR_H) cfgloop.h \
+ tree-vectorizer.h tree-data-ref.h $(SCEV_H) $(EXPR_H)
+tree-vect-transform.o: tree-vect-transform.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
+ errors.h $(GGC_H) $(OPTABS_H) $(TREE_H) $(RTL_H) $(BASIC_BLOCK_H) diagnostic.h \
+ $(TREE_FLOW_H) $(TREE_DUMP_H) $(TIMEVAR_H) cfgloop.h target.h tree-pass.h $(EXPR_H) \
+ tree-vectorizer.h tree-data-ref.h $(SCEV_H) langhooks.h toplev.h
tree-vectorizer.o: tree-vectorizer.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
errors.h $(GGC_H) $(OPTABS_H) $(TREE_H) $(RTL_H) $(BASIC_BLOCK_H) diagnostic.h \
$(TREE_FLOW_H) $(TREE_DUMP_H) $(TIMEVAR_H) cfgloop.h tree-pass.h $(EXPR_H) \
- tree-vectorizer.h tree-data-ref.h $(SCEV_H)
+ tree-vectorizer.h tree-data-ref.h $(SCEV_H) input.h target.h cfglayout.h
tree-loop-linear.o: tree-loop-linear.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
errors.h $(GGC_H) $(OPTABS_H) $(TREE_H) $(RTL_H) $(BASIC_BLOCK_H) diagnostic.h \
$(TREE_FLOW_H) $(TREE_DUMP_H) $(TIMEVAR_H) cfgloop.h tree-pass.h \
varasm.o : varasm.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) $(RTL_H) \
$(FLAGS_H) function.h $(EXPR_H) hard-reg-set.h $(REGS_H) \
output.h $(C_PRAGMA_H) toplev.h xcoffout.h debug.h $(GGC_H) $(TM_P_H) \
- $(HASHTAB_H) $(TARGET_H) langhooks.h gt-varasm.h real.h
+ $(HASHTAB_H) $(TARGET_H) langhooks.h gt-varasm.h real.h $(BASIC_BLOCK_H)
function.o : function.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \
$(TREE_H) $(CFGLAYOUT_H) $(TREE_GIMPLE_H) \
$(FLAGS_H) function.h $(EXPR_H) $(OPTABS_H) libfuncs.h $(REGS_H) hard-reg-set.h \
toplev.h $(BASIC_BLOCK_H) $(COVERAGE_H) $(TREE_FLOW_H) value-prof.h $(GGC_H)
value-prof.o : value-prof.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \
$(BASIC_BLOCK_H) hard-reg-set.h value-prof.h $(EXPR_H) output.h $(FLAGS_H) \
- $(RECOG_H) insn-config.h $(OPTABS_H) $(REGS_H) $(GGC_H)
+ $(RECOG_H) insn-config.h $(OPTABS_H) $(REGS_H) $(GGC_H) $(DIAGNOSTIC_H) \
+ $(TREE_H) $(COVERAGE_H)
loop.o : loop.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(FLAGS_H) \
insn-config.h $(REGS_H) hard-reg-set.h $(RECOG_H) $(EXPR_H) \
real.h $(PREDICT_H) $(BASIC_BLOCK_H) function.h $(CFGLOOP_H) \
combine.o : combine.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \
$(FLAGS_H) function.h insn-config.h $(INSN_ATTR_H) $(REGS_H) $(EXPR_H) \
rtlhooks-def.h $(BASIC_BLOCK_H) $(RECOG_H) real.h hard-reg-set.h \
- toplev.h $(TM_P_H) $(TREE_H) $(TARGET_H) output.h $(PARAMS_H)
+ toplev.h $(TM_P_H) $(TREE_H) $(TARGET_H) output.h $(PARAMS_H) $(OPTABS_H)
regclass.o : regclass.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \
hard-reg-set.h $(FLAGS_H) $(BASIC_BLOCK_H) $(REGS_H) insn-config.h \
$(RECOG_H) reload.h real.h toplev.h function.h output.h $(GGC_H) \
postreload-gcse.o : postreload-gcse.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
$(RTL_H) $(REGS_H) hard-reg-set.h $(FLAGS_H) real.h insn-config.h $(GGC_H) \
$(RECOG_H) $(EXPR_H) $(BASIC_BLOCK_H) function.h output.h toplev.h $(TM_P_H) \
- except.h $(TREE_H)
+ except.h $(TREE_H) $(TARGET_H)
caller-save.o : caller-save.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \
$(FLAGS_H) $(REGS_H) hard-reg-set.h insn-config.h $(BASIC_BLOCK_H) function.h \
$(RECOG_H) reload.h $(EXPR_H) toplev.h $(TM_P_H)
$(RTL_H) $(GGC_H) gt-lists.h
bb-reorder.o : bb-reorder.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \
$(RTL_H) $(BASIC_BLOCK_H) $(FLAGS_H) $(TIMEVAR_H) output.h $(CFGLAYOUT_H) $(FIBHEAP_H) \
- $(TARGET_H) function.h $(TM_P_H) $(OBSTACK_H) $(EXPR_H) $(REGS_H)
+ $(TARGET_H) function.h $(TM_P_H) $(OBSTACK_H) $(EXPR_H) $(REGS_H) errors.h
tracer.o : tracer.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) \
$(BASIC_BLOCK_H) hard-reg-set.h output.h $(CFGLAYOUT_H) $(FLAGS_H) $(TIMEVAR_H) \
$(PARAMS_H) $(COVERAGE_H)
# FIXME: writing proper dependencies for this is a *LOT* of work.
libbackend.o : $(OBJS-common:.o=.c) $(out_file) \
insn-config.h insn-flags.h insn-codes.h insn-constants.h \
- insn-attr.h
+ insn-attr.h $(DATESTAMP) $(BASEVER) $(DEVPHASE)
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
-DTARGET_NAME=\"$(target_noncanonical)\" \
-DLOCALEDIR=\"$(localedir)\" \
- -c $(filter %.c,$^) -o $@ -combine
+ -c $(filter %.c,$^) -o $@ \
+ -DBASEVER=$(BASEVER_s) -DDATESTAMP=$(DATESTAMP_s) \
+ -DDEVPHASE=$(DEVPHASE_s) -combine
#\f
# Generate header and source files from the machine description,
$(srcdir)/sdbout.c $(srcdir)/stor-layout.c \
$(srcdir)/stringpool.c $(srcdir)/tree.c $(srcdir)/varasm.c \
$(srcdir)/tree-mudflap.c $(srcdir)/tree-flow.h \
- $(srcdir)/c-objc-common.c $(srcdir)/c-common.c $(srcdir)/c-parse.in \
+ $(srcdir)/c-objc-common.c $(srcdir)/c-common.c $(srcdir)/c-parser.c \
$(srcdir)/tree-ssanames.c $(srcdir)/tree-eh.c \
$(srcdir)/tree-phinodes.c $(srcdir)/tree-cfg.c \
$(srcdir)/tree-dfa.c $(srcdir)/tree-ssa-propagate.c \
gt-lists.h gt-alias.h gt-cselib.h gt-gcse.h \
gt-expr.h gt-sdbout.h gt-optabs.h gt-bitmap.h gt-dojump.h \
gt-dwarf2out.h gt-reg-stack.h gt-dwarf2asm.h \
-gt-dbxout.h gt-c-common.h gt-c-decl.h gt-c-parse.h \
+gt-dbxout.h gt-c-common.h gt-c-decl.h gt-c-parser.h \
gt-c-pragma.h gtype-c.h gt-cfglayout.h \
gt-tree-mudflap.h gt-tree-complex.h \
gt-tree-eh.h \
-rm -f tmp-proto.[cs] tmp-proto$(objext)
# gcov-iov.c is run on the build machine to generate gcov-iov.h from version.c
-build/gcov-iov.o: gcov-iov.c version.c $(BCONFIG_H) coretypes.h $(GTM_H) \
+build/gcov-iov.o: gcov-iov.c $(BCONFIG_H) coretypes.h $(GTM_H) \
$(SYSTEM_H) coretypes.h $(TM_H)
build/gcov-iov$(build_exeext): build/gcov-iov.o
$(CC_FOR_BUILD) $(BUILD_CFLAGS) $(BUILD_LDFLAGS) build/gcov-iov.o -o $@
gcov-iov.h: s-iov
-s-iov: build/gcov-iov$(build_exeext)
- build/gcov-iov$(build_exeext) > tmp-gcov-iov.h
+s-iov: build/gcov-iov$(build_exeext) $(BASEVER) $(DEVPHASE)
+ build/gcov-iov$(build_exeext) '$(BASEVER_c)' '$(DEVPHASE_c)' \
+ > tmp-gcov-iov.h
$(SHELL) $(srcdir)/../move-if-change tmp-gcov-iov.h gcov-iov.h
$(STAMP) s-iov
$(SHELL) $(srcdir)/../move-if-change tmp-macro_list macro_list
$(STAMP) s-macro_list
+# The line below is supposed to avoid accidentally matching the
+# built-in suffix rule `.o:' to build fixincl out of fixincl.o. You'd
+# expect fixincl to be newer than fixincl.o, such that this situation
+# would never come up. As it turns out, if you use ccache with
+# CCACHE_HARDLINK enabled, the compiler doesn't embed the current
+# working directory in object files (-g absent, or -fno-working-dir
+# present), and build and host are the same, fixincl for the host will
+# build after fixincl for the build machine, getting a cache hit,
+# thereby updating the timestamp of fixincl.o in the the host tree.
+# Because of CCACHE_HARDLINK, this will also update the timestamp in
+# the build tree, and so fixincl in the build tree will appear to be
+# out of date. Yuck.
+../$(build_subdir)/fixincludes/fixincl: ; @ :
+
# Build fixed copies of system files.
stmp-fixinc: gsyslimits.h macro_list \
- ../$(build_subdir)/fixincludes/fixincl \
- ../$(build_subdir)/fixincludes/fixinc.sh
+ $(build_objdir)/fixincludes/fixincl \
+ $(build_objdir)/fixincludes/fixinc.sh
@if test ! -d ${SYSTEM_HEADER_DIR}; then \
echo The directory that should contain system headers does not exist: >&2 ; \
echo " ${SYSTEM_HEADER_DIR}" >&2 ; \
(TARGET_MACHINE='$(target)'; srcdir=`cd $(srcdir); ${PWD_COMMAND}`; \
SHELL='$(SHELL)'; MACRO_LIST=`${PWD_COMMAND}`/macro_list ; \
export TARGET_MACHINE srcdir SHELL MACRO_LIST && \
- cd ../$(build_subdir)/fixincludes && \
+ cd $(build_objdir)/fixincludes && \
$(SHELL) ./fixinc.sh ../../gcc/include \
$(SYSTEM_HEADER_DIR) $(OTHER_FIXINCLUDES_DIRS) )
rm -f include/syslimits.h
srcinfo: $(INFOFILES)
-cp -p $^ $(srcdir)/doc
-TEXI_CPP_FILES = cpp.texi fdl.texi cppenv.texi cppopts.texi
+TEXI_CPP_FILES = cpp.texi fdl.texi cppenv.texi cppopts.texi \
+ gcc-common.texi gcc-vers.texi
-TEXI_GCC_FILES = gcc.texi gcc-common.texi frontends.texi standards.texi \
- invoke.texi extend.texi md.texi objc.texi gcov.texi trouble.texi \
- bugreport.texi service.texi contribute.texi compat.texi funding.texi \
- gnu.texi gpl.texi fdl.texi contrib.texi cppenv.texi cppopts.texi \
+TEXI_GCC_FILES = gcc.texi gcc-common.texi gcc-vers.texi frontends.texi \
+ standards.texi invoke.texi extend.texi md.texi objc.texi \
+ gcov.texi trouble.texi bugreport.texi service.texi \
+ contribute.texi compat.texi funding.texi gnu.texi gpl.texi \
+ fdl.texi contrib.texi cppenv.texi cppopts.texi \
implement-c.texi
-TEXI_GCCINT_FILES = gccint.texi gcc-common.texi contribute.texi makefile.texi \
- configterms.texi portability.texi interface.texi passes.texi \
- c-tree.texi rtl.texi md.texi tm.texi hostconfig.texi fragments.texi \
- configfiles.texi collect2.texi headerdirs.texi funding.texi gnu.texi \
- gpl.texi fdl.texi contrib.texi languages.texi sourcebuild.texi \
- gty.texi libgcc.texi cfg.texi tree-ssa.texi
+TEXI_GCCINT_FILES = gccint.texi gcc-common.texi gcc-vers.texi \
+ contribute.texi makefile.texi configterms.texi options.texi \
+ portability.texi interface.texi passes.texi c-tree.texi \
+ rtl.texi md.texi tm.texi hostconfig.texi fragments.texi \
+ configfiles.texi collect2.texi headerdirs.texi funding.texi \
+ gnu.texi gpl.texi fdl.texi contrib.texi languages.texi \
+ sourcebuild.texi gty.texi libgcc.texi cfg.texi tree-ssa.texi
TEXI_GCCINSTALL_FILES = install.texi install-old.texi fdl.texi
-TEXI_CPPINT_FILES = cppinternals.texi
+TEXI_CPPINT_FILES = cppinternals.texi gcc-common.texi gcc-vers.texi
+
+# gcc-vers.texi is generated from the version files.
+gcc-vers.texi: $(BASEVER) $(DEVPHASE)
+ (echo "@set version-GCC $(BASEVER_c)"; \
+ if [ "$(DEVPHASE_c)" = "experimental" ]; \
+ then echo "@set DEVELOPMENT"; \
+ else echo "@clear DEVELOPMENT"; \
+ fi) > $@T
+ mv -f $@T $@
+
# The *.1, *.7, *.info, and *.dvi files are being generated from implicit
# patterns. To use them, put each of the specific targets with its
doc/%.info: %.texi
if [ x$(BUILD_INFO) = xinfo ]; then \
- $(MAKEINFO) $(MAKEINFOFLAGS) -I $(docdir) \
+ $(MAKEINFO) $(MAKEINFOFLAGS) -I . -I $(docdir) \
-I $(docdir)/include -o $@ $<; \
fi
doc/cppinternals.dvi
doc/%.dvi: %.texi
- $(TEXI2DVI) -I $(abs_docdir) -I $(abs_docdir)/include -o $@ $<
+ $(TEXI2DVI) -I . -I $(abs_docdir) -I $(abs_docdir)/include -o $@ $<
# Duplicate entry to handle renaming of gccinstall.dvi
doc/gccinstall.dvi: $(TEXI_GCCINSTALL_FILES)
- $(TEXI2DVI) -I $(abs_docdir) -I $(abs_docdir)/include -o $@ $<
+ $(TEXI2DVI) -I . -I $(abs_docdir) -I $(abs_docdir)/include -o $@ $<
html:: $(htmldir)/cpp/index.html $(htmldir)/gcc/index.html \
$(htmldir)/gccinstall/index.html $(htmldir)/gccint/index.html \
-rm -f Makefile *.oaux
-rm -f gthr-default.h
-rm -f */stage1 */stage2 */stage3 */stage4 */include */stageprofile */stagefeedback
- -rm -f c-parse.y c-parse.c c-parse.output TAGS */TAGS
+ -rm -f TAGS */TAGS
-rm -f *.asm
-rm -f site.exp site.bak testsuite/site.exp testsuite/site.bak
-rm -f testsuite/*.log testsuite/*.sum
@echo 'This command is intended for maintainers to use; it'
@echo 'deletes files that may need special tools to rebuild.'
$(MAKE) lang.maintainer-clean distclean
- -rm -f $(srcdir)/c-parse.y $(srcdir)/c-parse.c
-rm -f cpp.??s cpp.*aux
-rm -f gcc.??s gcc.*aux
-rm -f $(docdir)/*.info $(docdir)/*.1 $(docdir)/*.7 $(docdir)/*.dvi
mkdir $(DESTDIR)$(libsubdir)/include
-chmod a+rx $(DESTDIR)$(libsubdir)/include
+# Create or recreate the install-tools include file directory.
+itoolsdir = $(libexecsubdir)/install-tools
+itoolsdatadir = $(libsubdir)/install-tools
+install-itoolsdirs: installdirs
+ $(mkinstalldirs) $(DESTDIR)$(itoolsdatadir)/include
+ $(mkinstalldirs) $(DESTDIR)$(itoolsdir)
+
# Install the include directory using tar.
install-headers-tar: stmp-int-hdrs $(STMP_FIXPROTO) install-include-dir
# We use `pwd`/include instead of just include to problems with CDPATH
install-headers-cp: stmp-int-hdrs $(STMP_FIXPROTO) install-include-dir
cp -p -r include $(DESTDIR)$(libsubdir)
-itoolsdir = $(libexecsubdir)/install-tools
-itoolsdatadir = $(libsubdir)/install-tools
# Install supporting files for fixincludes to be run later.
-install-mkheaders: stmp-int-hdrs $(STMP_FIXPROTO) install-include-dir \
+install-mkheaders: stmp-int-hdrs $(STMP_FIXPROTO) install-itoolsdirs \
macro_list xlimits.h
for file in $(USER_H); do \
realfile=`echo $$file | sed -e 's|.*/\([^/]*\)$$|\1|'`; \
incs="$$incs --include $$dir/TAGS.sub"; \
fi; \
done; \
- etags -o TAGS.sub *.y *.h *.c -l yacc c-parse.in; \
+ etags -o TAGS.sub *.y *.h *.c; \
etags --include TAGS.sub $$incs)
# ------------------------------------------------------
# Files never linked into the final executable produces warnings about missing
# profile.
STAGEFEEDBACK_FLAGS_TO_PASS = \
- CFLAGS="$(BOOT_CFLAGS) -fprofile-use"
+ CFLAGS="$(BOOT_CFLAGS) -fprofile-use -freorder-blocks-and-partition"
# Only build the C compiler for stage1, because that is the only one that
# we can guarantee will build with the native compiler, and also it is the
XGETTEXT = @XGETTEXT@
GMSGFMT = @GMSGFMT@
MSGMERGE = msgmerge
-
-PACKAGE = @PACKAGE@
CATALOGS = @CATALOGS@
.PHONY: build- install- build-po install-po update-po
# The new .po has to be gone over by hand, so we deposit it into
# build/po with a different extension.
-# If build/po/$(PACKAGE).pot exists, use it (it was just created),
+# If build/po/gcc.pot exists, use it (it was just created),
# else use the one in srcdir.
.po.pox:
-test -d po || mkdir po
- $(MSGMERGE) $< `if test -f po/$(PACKAGE).pot; \
- then echo po/$(PACKAGE).pot; \
- else echo $(srcdir)/po/$(PACKAGE).pot; fi` -o $@
+ $(MSGMERGE) $< `if test -f po/gcc.pot; \
+ then echo po/gcc.pot; \
+ else echo $(srcdir)/po/gcc.pot; fi` -o $@
# This rule has to look for .gmo modules in both srcdir and
# the cwd, and has to check that we actually have a catalog
dir=$(localedir)/$$lang/LC_MESSAGES; \
echo $(mkinstalldirs) $(DESTDIR)$$dir; \
$(mkinstalldirs) $(DESTDIR)$$dir || exit 1; \
- echo $(INSTALL_DATA) $$cat $(DESTDIR)$$dir/$(PACKAGE).mo; \
- $(INSTALL_DATA) $$cat $(DESTDIR)$$dir/$(PACKAGE).mo; \
+ echo $(INSTALL_DATA) $$cat $(DESTDIR)$$dir/gcc.mo; \
+ $(INSTALL_DATA) $$cat $(DESTDIR)$$dir/gcc.mo; \
done
# Rule for regenerating the message template (gcc.pot).
# Note that exgettext has an awk script embedded in it which requires a
# fairly modern (POSIX-compliant) awk.
# The .pot file is left in the build directory.
-$(PACKAGE).pot: po/$(PACKAGE).pot
-po/$(PACKAGE).pot: force options.c
+gcc.pot: po/gcc.pot
+po/gcc.pot: force options.c
-test -d po || mkdir po
$(MAKE) srcextra
AWK=$(AWK) $(SHELL) $(srcdir)/po/exgettext \
- $(XGETTEXT) $(PACKAGE) $(srcdir)
+ $(XGETTEXT) gcc $(srcdir)
OSDN Git Service
