libstdc++-v3/Makefile.in

   1 # Makefile.in generated by automake 1.9.6 from Makefile.am.
   2 # @configure_input@
   3
   4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
   5 # 2003, 2004, 2005  Free Software Foundation, Inc.
   6 # This Makefile.in is free software; the Free Software Foundation
   7 # gives unlimited permission to copy and/or distribute it,
   8 # with or without modifications, as long as this notice is preserved.
   9
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  12 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  13 # PARTICULAR PURPOSE.
  14
  15 @SET_MAKE@
  16 srcdir = @srcdir@
  17 top_srcdir = @top_srcdir@
  18 VPATH = @srcdir@
  19 pkgdatadir = $(datadir)/@PACKAGE@
  20 pkglibdir = $(libdir)/@PACKAGE@
  21 pkgincludedir = $(includedir)/@PACKAGE@
  22 top_builddir = .
  23 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  24 INSTALL = @INSTALL@
  25 install_sh_DATA = $(install_sh) -c -m 644
  26 install_sh_PROGRAM = $(install_sh) -c
  27 install_sh_SCRIPT = $(install_sh) -c
  28 INSTALL_HEADER = $(INSTALL_DATA)
  29 transform = $(program_transform_name)
  30 NORMAL_INSTALL = :
  31 PRE_INSTALL = :
  32 POST_INSTALL = :
  33 NORMAL_UNINSTALL = :
  34 PRE_UNINSTALL = :
  35 POST_UNINSTALL = :
  36 build_triplet = @build@
  37 host_triplet = @host@
  38 target_triplet = @target@
  39 DIST_COMMON = README $(am__configure_deps) $(srcdir)/../config.guess \
  40         $(srcdir)/../config.sub $(srcdir)/../install-sh \
  41         $(srcdir)/../ltmain.sh $(srcdir)/../missing \
  42         $(srcdir)/../mkinstalldirs $(srcdir)/Makefile.am \
  43         $(srcdir)/Makefile.in $(srcdir)/config.h.in \
  44         $(top_srcdir)/configure $(top_srcdir)/fragment.am \
  45         $(top_srcdir)/scripts/testsuite_flags.in ChangeLog
  46 subdir = .
  47 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
  48 am__aclocal_m4_deps = $(top_srcdir)/../config/enable.m4 \
  49         $(top_srcdir)/../config/lead-dot.m4 \
  50         $(top_srcdir)/../config/no-executables.m4 \
  51         $(top_srcdir)/../libtool.m4 $(top_srcdir)/crossconfig.m4 \
  52         $(top_srcdir)/linkage.m4 $(top_srcdir)/acinclude.m4 \
  53         $(top_srcdir)/../config/tls.m4 $(top_srcdir)/configure.ac
  54 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
  55         $(ACLOCAL_M4)
  56 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
  57  configure.lineno configure.status.lineno
  58 CONFIG_HEADER = config.h
  59 CONFIG_CLEAN_FILES = scripts/testsuite_flags
  60 depcomp =
  61 am__depfiles_maybe =
  62 SOURCES =
  63 DIST_SOURCES =
  64 MULTISRCTOP =
  65 MULTIBUILDTOP =
  66 MULTIDIRS =
  67 MULTISUBDIR =
  68 MULTIDO = true
  69 MULTICLEAN = true
  70 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
  71         html-recursive info-recursive install-data-recursive \
  72         install-exec-recursive install-info-recursive \
  73         install-recursive installcheck-recursive installdirs-recursive \
  74         pdf-recursive ps-recursive uninstall-info-recursive \
  75         uninstall-recursive
  76 ETAGS = etags
  77 CTAGS = ctags
  78 DIST_SUBDIRS = include libsupc++ libmath src po testsuite
  79 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
  80 distdir = $(PACKAGE)-$(VERSION)
  81 top_distdir = $(distdir)
  82 am__remove_distdir = \
  83   { test ! -d $(distdir) \
  84     || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
  85          && rm -fr $(distdir); }; }
  86 DIST_ARCHIVES = $(distdir).tar.gz
  87 GZIP_ENV = --best
  88 distuninstallcheck_listfiles = find . -type f -print
  89 distcleancheck_listfiles = find . -type f -print
  90 ABI_TWEAKS_SRCDIR = @ABI_TWEAKS_SRCDIR@
  91 ACLOCAL = @ACLOCAL@
  92 ALLOCATOR_H = @ALLOCATOR_H@
  93 ALLOCATOR_NAME = @ALLOCATOR_NAME@
  94 AMTAR = @AMTAR@
  95 AR = @AR@
  96 AS = @AS@
  97 ATOMICITY_SRCDIR = @ATOMICITY_SRCDIR@
  98 ATOMIC_WORD_SRCDIR = @ATOMIC_WORD_SRCDIR@
  99 AUTOCONF = @AUTOCONF@
 100 AUTOHEADER = @AUTOHEADER@
 101 AUTOMAKE = @AUTOMAKE@
 102 AWK = @AWK@
 103 BASIC_FILE_CC = @BASIC_FILE_CC@
 104 BASIC_FILE_H = @BASIC_FILE_H@
 105 CC = @CC@
 106 CCODECVT_CC = @CCODECVT_CC@
 107 CCOLLATE_CC = @CCOLLATE_CC@
 108 CCTYPE_CC = @CCTYPE_CC@
 109 CFLAGS = @CFLAGS@
 110 CLOCALE_CC = @CLOCALE_CC@
 111 CLOCALE_H = @CLOCALE_H@
 112 CLOCALE_INTERNAL_H = @CLOCALE_INTERNAL_H@
 113 CMESSAGES_CC = @CMESSAGES_CC@
 114 CMESSAGES_H = @CMESSAGES_H@
 115 CMONEY_CC = @CMONEY_CC@
 116 CNUMERIC_CC = @CNUMERIC_CC@
 117 CPP = @CPP@
 118 CPPFLAGS = @CPPFLAGS@
 119 CPU_DEFINES_SRCDIR = @CPU_DEFINES_SRCDIR@
 120 CSTDIO_H = @CSTDIO_H@
 121 CTIME_CC = @CTIME_CC@
 122 CTIME_H = @CTIME_H@
 123 CXX = @CXX@
 124 CXXCPP = @CXXCPP@
 125 CXXFLAGS = @CXXFLAGS@
 126 CYGPATH_W = @CYGPATH_W@
 127 C_INCLUDE_DIR = @C_INCLUDE_DIR@
 128 DEBUG_FLAGS = @DEBUG_FLAGS@
 129 DEFS = @DEFS@
 130 ECHO_C = @ECHO_C@
 131 ECHO_N = @ECHO_N@
 132 ECHO_T = @ECHO_T@
 133 EGREP = @EGREP@
 134 ENABLE_SYMVERS_DARWIN_FALSE = @ENABLE_SYMVERS_DARWIN_FALSE@
 135 ENABLE_SYMVERS_DARWIN_TRUE = @ENABLE_SYMVERS_DARWIN_TRUE@
 136 ENABLE_SYMVERS_FALSE = @ENABLE_SYMVERS_FALSE@
 137 ENABLE_SYMVERS_GNU_FALSE = @ENABLE_SYMVERS_GNU_FALSE@
 138 ENABLE_SYMVERS_GNU_NAMESPACE_FALSE = @ENABLE_SYMVERS_GNU_NAMESPACE_FALSE@
 139 ENABLE_SYMVERS_GNU_NAMESPACE_TRUE = @ENABLE_SYMVERS_GNU_NAMESPACE_TRUE@
 140 ENABLE_SYMVERS_GNU_TRUE = @ENABLE_SYMVERS_GNU_TRUE@
 141 ENABLE_SYMVERS_TRUE = @ENABLE_SYMVERS_TRUE@
 142 EXEEXT = @EXEEXT@
 143 EXTRA_CXX_FLAGS = @EXTRA_CXX_FLAGS@
 144 GLIBCXX_BUILD_DEBUG_FALSE = @GLIBCXX_BUILD_DEBUG_FALSE@
 145 GLIBCXX_BUILD_DEBUG_TRUE = @GLIBCXX_BUILD_DEBUG_TRUE@
 146 GLIBCXX_BUILD_PCH_FALSE = @GLIBCXX_BUILD_PCH_FALSE@
 147 GLIBCXX_BUILD_PCH_TRUE = @GLIBCXX_BUILD_PCH_TRUE@
 148 GLIBCXX_C_HEADERS_COMPATIBILITY_FALSE = @GLIBCXX_C_HEADERS_COMPATIBILITY_FALSE@
 149 GLIBCXX_C_HEADERS_COMPATIBILITY_TRUE = @GLIBCXX_C_HEADERS_COMPATIBILITY_TRUE@
 150 GLIBCXX_C_HEADERS_C_FALSE = @GLIBCXX_C_HEADERS_C_FALSE@
 151 GLIBCXX_C_HEADERS_C_STD_FALSE = @GLIBCXX_C_HEADERS_C_STD_FALSE@
 152 GLIBCXX_C_HEADERS_C_STD_TRUE = @GLIBCXX_C_HEADERS_C_STD_TRUE@
 153 GLIBCXX_C_HEADERS_C_TRUE = @GLIBCXX_C_HEADERS_C_TRUE@
 154 GLIBCXX_HOSTED_FALSE = @GLIBCXX_HOSTED_FALSE@
 155 GLIBCXX_HOSTED_TRUE = @GLIBCXX_HOSTED_TRUE@
 156 GLIBCXX_INCLUDES = @GLIBCXX_INCLUDES@
 157 INSTALL_DATA = @INSTALL_DATA@
 158 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 159 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 160 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 161 LIBICONV = @LIBICONV@
 162 LIBMATHOBJS = @LIBMATHOBJS@
 163 LIBOBJS = @LIBOBJS@
 164 LIBS = @LIBS@
 165 LIBSUPCXX_PICFLAGS = @LIBSUPCXX_PICFLAGS@
 166 LIBTOOL = @LIBTOOL@
 167 LN_S = @LN_S@
 168 LTLIBOBJS = @LTLIBOBJS@
 169 MAINT = @MAINT@
 170 MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
 171 MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
 172 MAKEINFO = @MAKEINFO@
 173 OBJEXT = @OBJEXT@
 174 OPTIMIZE_CXXFLAGS = @OPTIMIZE_CXXFLAGS@
 175 OPT_LDFLAGS = @OPT_LDFLAGS@
 176 OS_INC_SRCDIR = @OS_INC_SRCDIR@
 177 PACKAGE = @PACKAGE@
 178 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 179 PACKAGE_NAME = @PACKAGE_NAME@
 180 PACKAGE_STRING = @PACKAGE_STRING@
 181 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 182 PACKAGE_VERSION = @PACKAGE_VERSION@
 183 PATH_SEPARATOR = @PATH_SEPARATOR@
 184 RANLIB = @RANLIB@
 185 SECTION_FLAGS = @SECTION_FLAGS@
 186 SECTION_LDFLAGS = @SECTION_LDFLAGS@
 187 SET_MAKE = @SET_MAKE@
 188 SHELL = @SHELL@
 189 STRIP = @STRIP@
 190 SYMVER_FILE = @SYMVER_FILE@
 191 TOPLEVEL_INCLUDES = @TOPLEVEL_INCLUDES@
 192 USE_NLS = @USE_NLS@
 193 VERSION = @VERSION@
 194 WARN_FLAGS = @WARN_FLAGS@
 195 WERROR = @WERROR@
 196 ac_ct_AR = @ac_ct_AR@
 197 ac_ct_AS = @ac_ct_AS@
 198 ac_ct_CC = @ac_ct_CC@
 199 ac_ct_CXX = @ac_ct_CXX@
 200 ac_ct_RANLIB = @ac_ct_RANLIB@
 201 ac_ct_STRIP = @ac_ct_STRIP@
 202 am__leading_dot = @am__leading_dot@
 203 am__tar = @am__tar@
 204 am__untar = @am__untar@
 205 baseline_dir = @baseline_dir@
 206 bindir = @bindir@
 207 build = @build@
 208 build_alias = @build_alias@
 209 build_cpu = @build_cpu@
 210 build_os = @build_os@
 211 build_vendor = @build_vendor@
 212 check_msgfmt = @check_msgfmt@
 213 datadir = @datadir@
 214 enable_shared = @enable_shared@
 215 enable_static = @enable_static@
 216 exec_prefix = @exec_prefix@
 217 glibcxx_MOFILES = @glibcxx_MOFILES@
 218 glibcxx_PCHFLAGS = @glibcxx_PCHFLAGS@
 219 glibcxx_POFILES = @glibcxx_POFILES@
 220 glibcxx_builddir = @glibcxx_builddir@
 221 glibcxx_localedir = @glibcxx_localedir@
 222 glibcxx_prefixdir = @glibcxx_prefixdir@
 223 glibcxx_srcdir = @glibcxx_srcdir@
 224 glibcxx_thread_h = @glibcxx_thread_h@
 225 glibcxx_toolexecdir = @glibcxx_toolexecdir@
 226 glibcxx_toolexeclibdir = @glibcxx_toolexeclibdir@
 227 gxx_include_dir = @gxx_include_dir@
 228 host = @host@
 229 host_alias = @host_alias@
 230 host_cpu = @host_cpu@
 231 host_os = @host_os@
 232 host_vendor = @host_vendor@
 233 includedir = @includedir@
 234 infodir = @infodir@
 235 install_sh = @install_sh@
 236 libdir = @libdir@
 237 libexecdir = @libexecdir@
 238 libtool_VERSION = @libtool_VERSION@
 239 localstatedir = @localstatedir@
 240 mandir = @mandir@
 241 mkdir_p = @mkdir_p@
 242 multi_basedir = @multi_basedir@
 243 oldincludedir = @oldincludedir@
 244 port_specific_symbol_files = @port_specific_symbol_files@
 245 prefix = @prefix@
 246 program_transform_name = @program_transform_name@
 247 sbindir = @sbindir@
 248 sharedstatedir = @sharedstatedir@
 249 sysconfdir = @sysconfdir@
 250 target = @target@
 251 target_alias = @target_alias@
 252 target_cpu = @target_cpu@
 253 target_os = @target_os@
 254 target_vendor = @target_vendor@
 255 toplevel_srcdir = @toplevel_srcdir@
 256
 257 # May be used by various substitution variables.
 258 gcc_version := $(shell cat $(top_srcdir)/../gcc/BASE-VER)
 259 MAINT_CHARSET = latin1
 260 mkinstalldirs = $(SHELL) $(toplevel_srcdir)/mkinstalldirs
 261 PWD_COMMAND = $${PWDCMD-pwd}
 262 STAMP = echo timestamp >
 263 toolexecdir = $(glibcxx_toolexecdir)
 264 toolexeclibdir = $(glibcxx_toolexeclibdir)
 265
 266 # These bits are all figured out from configure.  Look in acinclude.m4
 267 # or configure.ac to see how they are set.  See GLIBCXX_EXPORT_FLAGS.
 268 CONFIG_CXXFLAGS = \
 269         $(SECTION_FLAGS) $(EXTRA_CXX_FLAGS)
 270
 271 WARN_CXXFLAGS = \
 272         $(WARN_FLAGS) $(WERROR) -fdiagnostics-show-location=once
 273
 274
 275 # -I/-D flags to pass when compiling.
 276 AM_CPPFLAGS = $(GLIBCXX_INCLUDES)
 277 @GLIBCXX_HOSTED_TRUE@hosted_source = libmath src po testsuite
 278 SUBDIRS = include libsupc++ $(hosted_source)
 279 ACLOCAL_AMFLAGS = -I . -I .. -I ../config
 280
 281 # Multilib support.
 282 MAKEOVERRIDES =
 283
 284 # Work around what appears to be a GNU make bug handling MAKEFLAGS
 285 # values defined in terms of make variables, as is the case for CC and
 286 # friends when we are called from the top level Makefile.
 287 AM_MAKEFLAGS = \
 288         "AR_FLAGS=$(AR_FLAGS)" \
 289         "CC_FOR_BUILD=$(CC_FOR_BUILD)" \
 290         "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
 291         "CFLAGS=$(CFLAGS)" \
 292         "CXXFLAGS=$(CXXFLAGS)" \
 293         "CFLAGS_FOR_BUILD=$(CFLAGS_FOR_BUILD)" \
 294         "CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \
 295         "INSTALL=$(INSTALL)" \
 296         "INSTALL_DATA=$(INSTALL_DATA)" \
 297         "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
 298         "INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \
 299         "LDFLAGS=$(LDFLAGS)" \
 300         "LIBCFLAGS=$(LIBCFLAGS)" \
 301         "LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \
 302         "MAKE=$(MAKE)" \
 303         "MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \
 304         "PICFLAG=$(PICFLAG)" \
 305         "PICFLAG_FOR_TARGET=$(PICFLAG_FOR_TARGET)" \
 306         "SHELL=$(SHELL)" \
 307         "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
 308         "exec_prefix=$(exec_prefix)" \
 309         "infodir=$(infodir)" \
 310         "libdir=$(libdir)" \
 311         "includedir=$(includedir)" \
 312         "prefix=$(prefix)" \
 313         "tooldir=$(tooldir)" \
 314         "gxx_include_dir=$(gxx_include_dir)" \
 315         "AR=$(AR)" \
 316         "AS=$(AS)" \
 317         "LD=$(LD)" \
 318         "RANLIB=$(RANLIB)" \
 319         "NM=$(NM)" \
 320         "NM_FOR_BUILD=$(NM_FOR_BUILD)" \
 321         "NM_FOR_TARGET=$(NM_FOR_TARGET)" \
 322         "DESTDIR=$(DESTDIR)" \
 323         "WERROR=$(WERROR)"
 324
 325
 326 # Subdir rules rely on $(FLAGS_TO_PASS)
 327 FLAGS_TO_PASS = $(AM_MAKEFLAGS)
 328 all: config.h
 329         $(MAKE) $(AM_MAKEFLAGS) all-recursive
 330
 331 .SUFFIXES:
 332 am--refresh:
 333         @:
 334 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/fragment.am $(am__configure_deps)
 335         @for dep in $?; do \
 336           case '$(am__configure_deps)' in \
 337             *$$dep*) \
 338               echo ' cd $(srcdir) && $(AUTOMAKE) --foreign  --ignore-deps'; \
 339               cd $(srcdir) && $(AUTOMAKE) --foreign  --ignore-deps \
 340                 && exit 0; \
 341               exit 1;; \
 342           esac; \
 343         done; \
 344         echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  --ignore-deps Makefile'; \
 345         cd $(top_srcdir) && \
 346           $(AUTOMAKE) --foreign  --ignore-deps Makefile
 347 .PRECIOUS: Makefile
 348 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 349         @case '$?' in \
 350           *config.status*) \
 351             echo ' $(SHELL) ./config.status'; \
 352             $(SHELL) ./config.status;; \
 353           *) \
 354             echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
 355             cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
 356         esac;
 357
 358 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 359         $(SHELL) ./config.status --recheck
 360
 361 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 362         cd $(srcdir) && $(AUTOCONF)
 363 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 364         cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
 365
 366 config.h: stamp-h1
 367         @if test ! -f $@; then \
 368           rm -f stamp-h1; \
 369           $(MAKE) stamp-h1; \
 370         else :; fi
 371
 372 stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
 373         @rm -f stamp-h1
 374         cd $(top_builddir) && $(SHELL) ./config.status config.h
 375 $(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 376         cd $(top_srcdir) && $(AUTOHEADER)
 377         rm -f stamp-h1
 378         touch $@
 379
 380 distclean-hdr:
 381         -rm -f config.h stamp-h1
 382 scripts/testsuite_flags: $(top_builddir)/config.status $(top_srcdir)/scripts/testsuite_flags.in
 383         cd $(top_builddir) && $(SHELL) ./config.status $@
 384
 385 mostlyclean-libtool:
 386         -rm -f *.lo
 387
 388 clean-libtool:
 389         -rm -rf .libs _libs
 390
 391 distclean-libtool:
 392         -rm -f libtool
 393
 394 # GNU Make needs to see an explicit $(MAKE) variable in the command it
 395 # runs to enable its job server during parallel builds.  Hence the
 396 # comments below.
 397 all-multi:
 398         $(MULTIDO) $(AM_MAKEFLAGS) DO=all multi-do # $(MAKE)
 399 install-multi:
 400         $(MULTIDO) $(AM_MAKEFLAGS) DO=install multi-do # $(MAKE)
 401
 402 mostlyclean-multi:
 403         $(MULTICLEAN) $(AM_MAKEFLAGS) DO=mostlyclean multi-clean # $(MAKE)
 404 clean-multi:
 405         $(MULTICLEAN) $(AM_MAKEFLAGS) DO=clean multi-clean # $(MAKE)
 406 distclean-multi:
 407         $(MULTICLEAN) $(AM_MAKEFLAGS) DO=distclean multi-clean # $(MAKE)
 408 maintainer-clean-multi:
 409         $(MULTICLEAN) $(AM_MAKEFLAGS) DO=maintainer-clean multi-clean # $(MAKE)
 410 uninstall-info-am:
 411
 412 # This directory's subdirectories are mostly independent; you can cd
 413 # into them and run `make' without going through this Makefile.
 414 # To change the values of `make' variables: instead of editing Makefiles,
 415 # (1) if the variable is set in `config.status', edit `config.status'
 416 #     (which will cause the Makefiles to be regenerated when you run `make');
 417 # (2) otherwise, pass the desired values on the `make' command line.
 418 $(RECURSIVE_TARGETS):
 419         @failcom='exit 1'; \
 420         for f in x $$MAKEFLAGS; do \
 421           case $$f in \
 422             *=* | --[!k]*);; \
 423             *k*) failcom='fail=yes';; \
 424           esac; \
 425         done; \
 426         dot_seen=no; \
 427         target=`echo $@ | sed s/-recursive//`; \
 428         list='$(SUBDIRS)'; for subdir in $$list; do \
 429           echo "Making $$target in $$subdir"; \
 430           if test "$$subdir" = "."; then \
 431             dot_seen=yes; \
 432             local_target="$$target-am"; \
 433           else \
 434             local_target="$$target"; \
 435           fi; \
 436           (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 437           || eval $$failcom; \
 438         done; \
 439         if test "$$dot_seen" = "no"; then \
 440           $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 441         fi; test -z "$$fail"
 442
 443 mostlyclean-recursive clean-recursive distclean-recursive \
 444 maintainer-clean-recursive:
 445         @failcom='exit 1'; \
 446         for f in x $$MAKEFLAGS; do \
 447           case $$f in \
 448             *=* | --[!k]*);; \
 449             *k*) failcom='fail=yes';; \
 450           esac; \
 451         done; \
 452         dot_seen=no; \
 453         case "$@" in \
 454           distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
 455           *) list='$(SUBDIRS)' ;; \
 456         esac; \
 457         rev=''; for subdir in $$list; do \
 458           if test "$$subdir" = "."; then :; else \
 459             rev="$$subdir $$rev"; \
 460           fi; \
 461         done; \
 462         rev="$$rev ."; \
 463         target=`echo $@ | sed s/-recursive//`; \
 464         for subdir in $$rev; do \
 465           echo "Making $$target in $$subdir"; \
 466           if test "$$subdir" = "."; then \
 467             local_target="$$target-am"; \
 468           else \
 469             local_target="$$target"; \
 470           fi; \
 471           (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 472           || eval $$failcom; \
 473         done && test -z "$$fail"
 474 tags-recursive:
 475         list='$(SUBDIRS)'; for subdir in $$list; do \
 476           test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
 477         done
 478 ctags-recursive:
 479         list='$(SUBDIRS)'; for subdir in $$list; do \
 480           test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
 481         done
 482
 483 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 484         list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
 485         unique=`for i in $$list; do \
 486             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 487           done | \
 488           $(AWK) '    { files[$$0] = 1; } \
 489                END { for (i in files) print i; }'`; \
 490         mkid -fID $$unique
 491 tags: TAGS
 492 ctags: CTAGS
 493 CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
 494                 $(TAGS_FILES) $(LISP)
 495         tags=; \
 496         here=`pwd`; \
 497         list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
 498         unique=`for i in $$list; do \
 499             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 500           done | \
 501           $(AWK) '    { files[$$0] = 1; } \
 502                END { for (i in files) print i; }'`; \
 503         test -z "$(CTAGS_ARGS)$$tags$$unique" \
 504           || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 505              $$tags $$unique
 506
 507 GTAGS:
 508         here=`$(am__cd) $(top_builddir) && pwd` \
 509           && cd $(top_srcdir) \
 510           && gtags -i $(GTAGS_ARGS) $$here
 511
 512 distclean-tags:
 513         -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 514
 515 distdir: $(DISTFILES)
 516         $(am__remove_distdir)
 517         mkdir $(distdir)
 518         $(mkdir_p) $(distdir)/.. $(distdir)/../config $(distdir)/scripts
 519         @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
 520         topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
 521         list='$(DISTFILES)'; for file in $$list; do \
 522           case $$file in \
 523             $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
 524             $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
 525           esac; \
 526           if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 527           dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
 528           if test "$$dir" != "$$file" && test "$$dir" != "."; then \
 529             dir="/$$dir"; \
 530             $(mkdir_p) "$(distdir)$$dir"; \
 531           else \
 532             dir=''; \
 533           fi; \
 534           if test -d $$d/$$file; then \
 535             if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 536               cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
 537             fi; \
 538             cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
 539           else \
 540             test -f $(distdir)/$$file \
 541             || cp -p $$d/$$file $(distdir)/$$file \
 542             || exit 1; \
 543           fi; \
 544         done
 545         list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 546           if test "$$subdir" = .; then :; else \
 547             test -d "$(distdir)/$$subdir" \
 548             || $(mkdir_p) "$(distdir)/$$subdir" \
 549             || exit 1; \
 550             distdir=`$(am__cd) $(distdir) && pwd`; \
 551             top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
 552             (cd $$subdir && \
 553               $(MAKE) $(AM_MAKEFLAGS) \
 554                 top_distdir="$$top_distdir" \
 555                 distdir="$$distdir/$$subdir" \
 556                 distdir) \
 557               || exit 1; \
 558           fi; \
 559         done
 560         -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
 561           ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
 562           ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
 563           ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
 564         || chmod -R a+r $(distdir)
 565 dist-gzip: distdir
 566         tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
 567         $(am__remove_distdir)
 568
 569 dist-bzip2: distdir
 570         tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
 571         $(am__remove_distdir)
 572
 573 dist-tarZ: distdir
 574         tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
 575         $(am__remove_distdir)
 576
 577 dist-shar: distdir
 578         shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
 579         $(am__remove_distdir)
 580
 581 dist-zip: distdir
 582         -rm -f $(distdir).zip
 583         zip -rq $(distdir).zip $(distdir)
 584         $(am__remove_distdir)
 585
 586 dist dist-all: distdir
 587         tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
 588         $(am__remove_distdir)
 589
 590 # This target untars the dist file and tries a VPATH configuration.  Then
 591 # it guarantees that the distribution is self-contained by making another
 592 # tarfile.
 593 distcheck: dist
 594         case '$(DIST_ARCHIVES)' in \
 595         *.tar.gz*) \
 596           GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
 597         *.tar.bz2*) \
 598           bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
 599         *.tar.Z*) \
 600           uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
 601         *.shar.gz*) \
 602           GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
 603         *.zip*) \
 604           unzip $(distdir).zip ;;\
 605         esac
 606         chmod -R a-w $(distdir); chmod a+w $(distdir)
 607         mkdir $(distdir)/_build
 608         mkdir $(distdir)/_inst
 609         chmod a-w $(distdir)
 610         dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
 611           && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
 612           && cd $(distdir)/_build \
 613           && ../configure --srcdir=.. --prefix="$$dc_install_base" \
 614             $(DISTCHECK_CONFIGURE_FLAGS) \
 615           && $(MAKE) $(AM_MAKEFLAGS) \
 616           && $(MAKE) $(AM_MAKEFLAGS) dvi \
 617           && $(MAKE) $(AM_MAKEFLAGS) check \
 618           && $(MAKE) $(AM_MAKEFLAGS) install \
 619           && $(MAKE) $(AM_MAKEFLAGS) installcheck \
 620           && $(MAKE) $(AM_MAKEFLAGS) uninstall \
 621           && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
 622                 distuninstallcheck \
 623           && chmod -R a-w "$$dc_install_base" \
 624           && ({ \
 625                (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
 626                && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
 627                && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
 628                && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
 629                     distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
 630               } || { rm -rf "$$dc_destdir"; exit 1; }) \
 631           && rm -rf "$$dc_destdir" \
 632           && $(MAKE) $(AM_MAKEFLAGS) dist \
 633           && rm -rf $(DIST_ARCHIVES) \
 634           && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
 635         $(am__remove_distdir)
 636         @(echo "$(distdir) archives ready for distribution: "; \
 637           list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
 638           sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
 639 distuninstallcheck:
 640         @cd $(distuninstallcheck_dir) \
 641         && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
 642            || { echo "ERROR: files left after uninstall:" ; \
 643                 if test -n "$(DESTDIR)"; then \
 644                   echo "  (check DESTDIR support)"; \
 645                 fi ; \
 646                 $(distuninstallcheck_listfiles) ; \
 647                 exit 1; } >&2
 648 distcleancheck: distclean
 649         @if test '$(srcdir)' = . ; then \
 650           echo "ERROR: distcleancheck can only run from a VPATH build" ; \
 651           exit 1 ; \
 652         fi
 653         @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
 654           || { echo "ERROR: files left in build directory after distclean:" ; \
 655                $(distcleancheck_listfiles) ; \
 656                exit 1; } >&2
 657 check-am: all-am
 658 check: check-recursive
 659 all-am: Makefile all-multi config.h
 660 installdirs: installdirs-recursive
 661 installdirs-am:
 662 install: install-recursive
 663 install-exec: install-exec-recursive
 664 install-data: install-data-recursive
 665 uninstall: uninstall-recursive
 666
 667 install-am: all-am
 668         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 669
 670 installcheck: installcheck-recursive
 671 install-strip:
 672         $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 673           install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 674           `test -z '$(STRIP)' || \
 675             echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
 676 mostlyclean-generic:
 677
 678 clean-generic:
 679
 680 distclean-generic:
 681         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 682
 683 maintainer-clean-generic:
 684         @echo "This command is intended for maintainers to use"
 685         @echo "it deletes files that may require special tools to rebuild."
 686 clean: clean-multi clean-recursive
 687
 688 clean-am: clean-generic clean-libtool mostlyclean-am
 689
 690 distclean: distclean-multi distclean-recursive
 691         -rm -f $(am__CONFIG_DISTCLEAN_FILES)
 692         -rm -f Makefile
 693 distclean-am: clean-am distclean-generic distclean-hdr \
 694         distclean-libtool distclean-tags
 695
 696 dvi: dvi-recursive
 697
 698 dvi-am:
 699
 700 html: html-recursive
 701
 702 info: info-recursive
 703
 704 info-am:
 705
 706 install-data-am:
 707
 708 install-exec-am: install-multi
 709
 710 install-info: install-info-recursive
 711
 712 install-man:
 713
 714 installcheck-am:
 715
 716 maintainer-clean: maintainer-clean-multi maintainer-clean-recursive
 717         -rm -f $(am__CONFIG_DISTCLEAN_FILES)
 718         -rm -rf $(top_srcdir)/autom4te.cache
 719         -rm -f Makefile
 720 maintainer-clean-am: distclean-am maintainer-clean-generic
 721
 722 mostlyclean: mostlyclean-multi mostlyclean-recursive
 723
 724 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
 725
 726 pdf: pdf-recursive
 727
 728 pdf-am:
 729
 730 ps: ps-recursive
 731
 732 ps-am:
 733
 734 uninstall-am: uninstall-info-am
 735
 736 uninstall-info: uninstall-info-recursive
 737
 738 .PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am all-multi \
 739         am--refresh check check-am clean clean-generic clean-libtool \
 740         clean-multi clean-recursive ctags ctags-recursive dist \
 741         dist-all dist-bzip2 dist-gzip dist-shar dist-tarZ dist-zip \
 742         distcheck distclean distclean-generic distclean-hdr \
 743         distclean-libtool distclean-multi distclean-recursive \
 744         distclean-tags distcleancheck distdir distuninstallcheck dvi \
 745         dvi-am html html-am info info-am install install-am \
 746         install-data install-data-am install-exec install-exec-am \
 747         install-info install-info-am install-man install-multi \
 748         install-strip installcheck installcheck-am installdirs \
 749         installdirs-am maintainer-clean maintainer-clean-generic \
 750         maintainer-clean-multi maintainer-clean-recursive mostlyclean \
 751         mostlyclean-generic mostlyclean-libtool mostlyclean-multi \
 752         mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \
 753         uninstall uninstall-am uninstall-info-am
 754
 755
 756 # These rules are messy, but are hella worth it.
 757 doxygen:
 758         -(srcdir=`cd ${top_srcdir}; ${PWD_COMMAND}`; \
 759           builddir=`${PWD_COMMAND}`; \
 760           ${SHELL} ${srcdir}/docs/doxygen/run_doxygen \
 761                     --host_alias=${host_alias} \
 762                     --mode=user $${srcdir} $${builddir})
 763
 764 doxygen-maint:
 765         -(srcdir=`cd ${top_srcdir}; ${PWD_COMMAND}`; \
 766           builddir=`${PWD_COMMAND}`; \
 767           ${SHELL} ${srcdir}/docs/doxygen/run_doxygen \
 768                     --host_alias=${host_alias} \
 769                     --mode=maint $${srcdir} $${builddir})
 770
 771 doxygen-man:
 772         -(srcdir=`cd ${top_srcdir}; ${PWD_COMMAND}`; \
 773           builddir=`${PWD_COMMAND}`; \
 774           ${SHELL} ${srcdir}/docs/doxygen/run_doxygen \
 775                     --host_alias=${host_alias} \
 776                     --mode=man $${srcdir} $${builddir})
 777
 778 .PHONY: doxygen doxygen-maint doxygen-man
 779
 780 # Handy forwarding targets.
 781 check-%:
 782         cd testsuite && $(MAKE) $@
 783
 784 # All the machinations with string instantiations messes up the
 785 # automake-generated TAGS rule. Make a simple one here.
 786 TAGS: tags-recursive $(LISP)
 787 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 788 # Otherwise a system limit (for SysV at least) may be exceeded.
 789 .NOEXPORT: