2 # Guess values for system-dependent variables and create Makefiles.
3 # Generated by GNU Autoconf 2.59.
5 # Copyright (C) 2003 Free Software Foundation, Inc.
6 # This configure script is free software; the Free Software Foundation
7 # gives unlimited permission to copy, distribute and modify it.
8 ## --------------------- ##
9 ## M4sh Initialization. ##
10 ## --------------------- ##
12 # Be Bourne compatible
13 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
16 # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
17 # is contrary to our usage. Disable this feature.
18 alias -g '${1+"$@"}'='"$@"'
19 elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
22 DUALCASE=1; export DUALCASE # for MKS sh
24 # Support unset when possible.
25 if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
32 # Work around bugs in pre-3.0 UWIN ksh.
33 $as_unset ENV MAIL MAILPATH
40 LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
41 LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
44 if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
45 eval $as_var=C; export $as_var
51 # Required to use basename.
52 if expr a : '\(a\)' >/dev/null 2>&1; then
58 if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
65 # Name of the executable.
66 as_me=`$as_basename "$0" ||
67 $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
68 X"$0" : 'X\(//\)$' \| \
69 X"$0" : 'X\(/\)$' \| \
70 . : '\(.\)' 2>/dev/null ||
72 sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
73 /^X\/\(\/\/\)$/{ s//\1/; q; }
74 /^X\/\(\/\).*/{ s//\1/; q; }
78 # PATH needs CR, and LINENO needs CR and PATH.
79 # Avoid depending upon Character Ranges.
80 as_cr_letters='abcdefghijklmnopqrstuvwxyz'
81 as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
82 as_cr_Letters=$as_cr_letters$as_cr_LETTERS
83 as_cr_digits='0123456789'
84 as_cr_alnum=$as_cr_Letters$as_cr_digits
86 # The user is always right.
87 if test "${PATH_SEPARATOR+set}" != set; then
88 echo "#! /bin/sh" >conf$$.sh
89 echo "exit 0" >>conf$$.sh
91 if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
102 as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
103 test "x$as_lineno_1" != "x$as_lineno_2" &&
104 test "x$as_lineno_3" = "x$as_lineno_2" || {
105 # Find who we are. Look in the path if we contain no path at all
108 *[\\/]* ) as_myself=$0 ;;
109 *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
113 test -z "$as_dir" && as_dir=.
114 test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
119 # We did not find ourselves, most probably we were run as `sh COMMAND'
120 # in which case we are not to be found in the path.
121 if test "x$as_myself" = x; then
124 if test ! -f "$as_myself"; then
125 { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
126 { (exit 1); exit 1; }; }
128 case $CONFIG_SHELL in
130 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
131 for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
134 test -z "$as_dir" && as_dir=.
135 for as_base in sh bash ksh sh5; do
138 if ("$as_dir/$as_base" -c '
141 as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
142 test "x$as_lineno_1" != "x$as_lineno_2" &&
143 test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
144 $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
145 $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
146 CONFIG_SHELL=$as_dir/$as_base
148 exec "$CONFIG_SHELL" "$0" ${1+"$@"}
156 # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
157 # uniformly replaced by the line number. The first 'sed' inserts a
158 # line-number line before each line; the second 'sed' does the real
159 # work. The second script uses 'N' to pair each line-number line
160 # with the numbered line, and appends trailing '-' during
161 # substitution so that $LINENO is not a special case at line end.
162 # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
163 # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
164 sed '=' <$as_myself |
169 s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
172 s,^['$as_cr_digits']*\n,,
174 chmod +x $as_me.lineno ||
175 { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
176 { (exit 1); exit 1; }; }
178 # Don't try to exec as it changes $[0], causing all sort of problems
179 # (the dirname of $[0] is not the place where we might find the
180 # original and so on. Autoconf is especially sensible to this).
182 # Exit status is that of the last command.
187 case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
188 *c*,-n*) ECHO_N= ECHO_C='
190 *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
191 *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
194 if expr a : '\(a\)' >/dev/null 2>&1; then
200 rm -f conf$$ conf$$.exe conf$$.file
202 if ln -s conf$$.file conf$$ 2>/dev/null; then
203 # We could just check for DJGPP; but this test a) works b) is more generic
204 # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
205 if test -f conf$$.exe; then
206 # Don't use ln at all; we don't have any links
211 elif ln conf$$.file conf$$ 2>/dev/null; then
216 rm -f conf$$ conf$$.exe conf$$.file
218 if mkdir -p . 2>/dev/null; then
221 test -d ./-p && rmdir ./-p
225 as_executable_p="test -f"
227 # Sed expression to map a string onto a valid CPP name.
228 as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
230 # Sed expression to map a string onto a valid variable name.
231 as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
235 # We need space, tab and new line, in precisely that order.
245 # hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
246 # so uname gets run too.
247 ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
254 ac_default_prefix=/usr/local
255 ac_config_libobj_dir=.
260 SHELL=${CONFIG_SHELL-/bin/sh}
262 # Maximum number of lines to put in a shell here document.
263 # This variable seems obsolete. It should probably be removed, and
264 # only ac_max_sed_lines should be used.
265 : ${ac_max_here_lines=38}
267 # Identity of this package.
274 ac_unique_file="Makefile.in"
275 ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS MAINT INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os target_noncanonical LN_S x_ada_cflags default_gnattools_target TOOLS_TARGET_PAIRS EXTRA_GNATTOOLS LIBOBJS LTLIBOBJS'
279 # Initialize some variables set by options.
281 ac_init_version=false
282 # The variables have the same names as the options, with
283 # dashes changed to underlines.
291 program_transform_name=s,x,x,
299 # Installation directory options.
300 # These are left unexpanded so users can "make install exec_prefix=/foo"
301 # and all the variables that are supposed to be based on exec_prefix
302 # by default will actually change.
303 # Use braces instead of parens because sh, perl, etc. also accept them.
304 bindir='${exec_prefix}/bin'
305 sbindir='${exec_prefix}/sbin'
306 libexecdir='${exec_prefix}/libexec'
307 datadir='${prefix}/share'
308 sysconfdir='${prefix}/etc'
309 sharedstatedir='${prefix}/com'
310 localstatedir='${prefix}/var'
311 libdir='${exec_prefix}/lib'
312 includedir='${prefix}/include'
313 oldincludedir='/usr/include'
314 infodir='${prefix}/info'
315 mandir='${prefix}/man'
320 # If the previous option needs an argument, assign it.
321 if test -n "$ac_prev"; then
322 eval "$ac_prev=\$ac_option"
327 ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
329 # Accept the important Cygnus configure options, so we can diagnose typos.
333 -bindir | --bindir | --bindi | --bind | --bin | --bi)
335 -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
338 -build | --build | --buil | --bui | --bu)
339 ac_prev=build_alias ;;
340 -build=* | --build=* | --buil=* | --bui=* | --bu=*)
341 build_alias=$ac_optarg ;;
343 -cache-file | --cache-file | --cache-fil | --cache-fi \
344 | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
345 ac_prev=cache_file ;;
346 -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
347 | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
348 cache_file=$ac_optarg ;;
351 cache_file=config.cache ;;
353 -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
355 -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
357 datadir=$ac_optarg ;;
359 -disable-* | --disable-*)
360 ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
361 # Reject names that are not valid shell variable names.
362 expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
363 { echo "$as_me: error: invalid feature name: $ac_feature" >&2
364 { (exit 1); exit 1; }; }
365 ac_feature=`echo $ac_feature | sed 's/-/_/g'`
366 eval "enable_$ac_feature=no" ;;
368 -enable-* | --enable-*)
369 ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
370 # Reject names that are not valid shell variable names.
371 expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
372 { echo "$as_me: error: invalid feature name: $ac_feature" >&2
373 { (exit 1); exit 1; }; }
374 ac_feature=`echo $ac_feature | sed 's/-/_/g'`
376 *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
379 eval "enable_$ac_feature='$ac_optarg'" ;;
381 -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
382 | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
383 | --exec | --exe | --ex)
384 ac_prev=exec_prefix ;;
385 -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
386 | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
387 | --exec=* | --exe=* | --ex=*)
388 exec_prefix=$ac_optarg ;;
390 -gas | --gas | --ga | --g)
391 # Obsolete; use --with-gas.
394 -help | --help | --hel | --he | -h)
396 -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
397 ac_init_help=recursive ;;
398 -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
399 ac_init_help=short ;;
401 -host | --host | --hos | --ho)
402 ac_prev=host_alias ;;
403 -host=* | --host=* | --hos=* | --ho=*)
404 host_alias=$ac_optarg ;;
406 -includedir | --includedir | --includedi | --included | --include \
407 | --includ | --inclu | --incl | --inc)
408 ac_prev=includedir ;;
409 -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
410 | --includ=* | --inclu=* | --incl=* | --inc=*)
411 includedir=$ac_optarg ;;
413 -infodir | --infodir | --infodi | --infod | --info | --inf)
415 -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
416 infodir=$ac_optarg ;;
418 -libdir | --libdir | --libdi | --libd)
420 -libdir=* | --libdir=* | --libdi=* | --libd=*)
423 -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
424 | --libexe | --libex | --libe)
425 ac_prev=libexecdir ;;
426 -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
427 | --libexe=* | --libex=* | --libe=*)
428 libexecdir=$ac_optarg ;;
430 -localstatedir | --localstatedir | --localstatedi | --localstated \
431 | --localstate | --localstat | --localsta | --localst \
432 | --locals | --local | --loca | --loc | --lo)
433 ac_prev=localstatedir ;;
434 -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
435 | --localstate=* | --localstat=* | --localsta=* | --localst=* \
436 | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
437 localstatedir=$ac_optarg ;;
439 -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
441 -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
445 # Obsolete; use --without-fp.
448 -no-create | --no-create | --no-creat | --no-crea | --no-cre \
449 | --no-cr | --no-c | -n)
452 -no-recursion | --no-recursion | --no-recursio | --no-recursi \
453 | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
456 -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
457 | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
458 | --oldin | --oldi | --old | --ol | --o)
459 ac_prev=oldincludedir ;;
460 -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
461 | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
462 | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
463 oldincludedir=$ac_optarg ;;
465 -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
467 -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
470 -program-prefix | --program-prefix | --program-prefi | --program-pref \
471 | --program-pre | --program-pr | --program-p)
472 ac_prev=program_prefix ;;
473 -program-prefix=* | --program-prefix=* | --program-prefi=* \
474 | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
475 program_prefix=$ac_optarg ;;
477 -program-suffix | --program-suffix | --program-suffi | --program-suff \
478 | --program-suf | --program-su | --program-s)
479 ac_prev=program_suffix ;;
480 -program-suffix=* | --program-suffix=* | --program-suffi=* \
481 | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
482 program_suffix=$ac_optarg ;;
484 -program-transform-name | --program-transform-name \
485 | --program-transform-nam | --program-transform-na \
486 | --program-transform-n | --program-transform- \
487 | --program-transform | --program-transfor \
488 | --program-transfo | --program-transf \
489 | --program-trans | --program-tran \
490 | --progr-tra | --program-tr | --program-t)
491 ac_prev=program_transform_name ;;
492 -program-transform-name=* | --program-transform-name=* \
493 | --program-transform-nam=* | --program-transform-na=* \
494 | --program-transform-n=* | --program-transform-=* \
495 | --program-transform=* | --program-transfor=* \
496 | --program-transfo=* | --program-transf=* \
497 | --program-trans=* | --program-tran=* \
498 | --progr-tra=* | --program-tr=* | --program-t=*)
499 program_transform_name=$ac_optarg ;;
501 -q | -quiet | --quiet | --quie | --qui | --qu | --q \
502 | -silent | --silent | --silen | --sile | --sil)
505 -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
507 -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
509 sbindir=$ac_optarg ;;
511 -sharedstatedir | --sharedstatedir | --sharedstatedi \
512 | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
513 | --sharedst | --shareds | --shared | --share | --shar \
515 ac_prev=sharedstatedir ;;
516 -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
517 | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
518 | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
520 sharedstatedir=$ac_optarg ;;
522 -site | --site | --sit)
524 -site=* | --site=* | --sit=*)
527 -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
529 -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
532 -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
533 | --syscon | --sysco | --sysc | --sys | --sy)
534 ac_prev=sysconfdir ;;
535 -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
536 | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
537 sysconfdir=$ac_optarg ;;
539 -target | --target | --targe | --targ | --tar | --ta | --t)
540 ac_prev=target_alias ;;
541 -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
542 target_alias=$ac_optarg ;;
544 -v | -verbose | --verbose | --verbos | --verbo | --verb)
547 -version | --version | --versio | --versi | --vers | -V)
551 ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
552 # Reject names that are not valid shell variable names.
553 expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
554 { echo "$as_me: error: invalid package name: $ac_package" >&2
555 { (exit 1); exit 1; }; }
556 ac_package=`echo $ac_package| sed 's/-/_/g'`
558 *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
561 eval "with_$ac_package='$ac_optarg'" ;;
563 -without-* | --without-*)
564 ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
565 # Reject names that are not valid shell variable names.
566 expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
567 { echo "$as_me: error: invalid package name: $ac_package" >&2
568 { (exit 1); exit 1; }; }
569 ac_package=`echo $ac_package | sed 's/-/_/g'`
570 eval "with_$ac_package=no" ;;
573 # Obsolete; use --with-x.
576 -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
577 | --x-incl | --x-inc | --x-in | --x-i)
578 ac_prev=x_includes ;;
579 -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
580 | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
581 x_includes=$ac_optarg ;;
583 -x-libraries | --x-libraries | --x-librarie | --x-librari \
584 | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
585 ac_prev=x_libraries ;;
586 -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
587 | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
588 x_libraries=$ac_optarg ;;
590 -*) { echo "$as_me: error: unrecognized option: $ac_option
591 Try \`$0 --help' for more information." >&2
592 { (exit 1); exit 1; }; }
596 ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
597 # Reject names that are not valid shell variable names.
598 expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
599 { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
600 { (exit 1); exit 1; }; }
601 ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
602 eval "$ac_envvar='$ac_optarg'"
606 # FIXME: should be removed in autoconf 3.0.
607 echo "$as_me: WARNING: you should use --build, --host, --target" >&2
608 expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
609 echo "$as_me: WARNING: invalid host type: $ac_option" >&2
610 : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
616 if test -n "$ac_prev"; then
617 ac_option=--`echo $ac_prev | sed 's/_/-/g'`
618 { echo "$as_me: error: missing argument to $ac_option" >&2
619 { (exit 1); exit 1; }; }
622 # Be sure to have absolute paths.
623 for ac_var in exec_prefix prefix
625 eval ac_val=$`echo $ac_var`
627 [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
628 *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
629 { (exit 1); exit 1; }; };;
633 # Be sure to have absolute paths.
634 for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
635 localstatedir libdir includedir oldincludedir infodir mandir
637 eval ac_val=$`echo $ac_var`
639 [\\/$]* | ?:[\\/]* ) ;;
640 *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
641 { (exit 1); exit 1; }; };;
645 # There might be people who depend on the old broken behavior: `$host'
646 # used to hold the argument of --host etc.
647 # FIXME: To remove some day.
652 # FIXME: To remove some day.
653 if test "x$host_alias" != x; then
654 if test "x$build_alias" = x; then
655 cross_compiling=maybe
656 echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
657 If a cross compiler is detected then cross compile mode will be used." >&2
658 elif test "x$build_alias" != "x$host_alias"; then
664 test -n "$host_alias" && ac_tool_prefix=$host_alias-
666 test "$silent" = yes && exec 6>/dev/null
669 # Find the source files, if location was not specified.
670 if test -z "$srcdir"; then
671 ac_srcdir_defaulted=yes
672 # Try the directory containing this script, then its parent.
673 ac_confdir=`(dirname "$0") 2>/dev/null ||
674 $as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
675 X"$0" : 'X\(//\)[^/]' \| \
676 X"$0" : 'X\(//\)$' \| \
677 X"$0" : 'X\(/\)' \| \
678 . : '\(.\)' 2>/dev/null ||
680 sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
681 /^X\(\/\/\)[^/].*/{ s//\1/; q; }
682 /^X\(\/\/\)$/{ s//\1/; q; }
683 /^X\(\/\).*/{ s//\1/; q; }
686 if test ! -r $srcdir/$ac_unique_file; then
690 ac_srcdir_defaulted=no
692 if test ! -r $srcdir/$ac_unique_file; then
693 if test "$ac_srcdir_defaulted" = yes; then
694 { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
695 { (exit 1); exit 1; }; }
697 { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
698 { (exit 1); exit 1; }; }
701 (cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
702 { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
703 { (exit 1); exit 1; }; }
704 srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
705 ac_env_build_alias_set=${build_alias+set}
706 ac_env_build_alias_value=$build_alias
707 ac_cv_env_build_alias_set=${build_alias+set}
708 ac_cv_env_build_alias_value=$build_alias
709 ac_env_host_alias_set=${host_alias+set}
710 ac_env_host_alias_value=$host_alias
711 ac_cv_env_host_alias_set=${host_alias+set}
712 ac_cv_env_host_alias_value=$host_alias
713 ac_env_target_alias_set=${target_alias+set}
714 ac_env_target_alias_value=$target_alias
715 ac_cv_env_target_alias_set=${target_alias+set}
716 ac_cv_env_target_alias_value=$target_alias
719 # Report the --help message.
721 if test "$ac_init_help" = "long"; then
722 # Omit some internal or obsolete options to make the list less imposing.
723 # This message is too long to be a string in the A/UX 3.1 sh.
725 \`configure' configures this package to adapt to many kinds of systems.
727 Usage: $0 [OPTION]... [VAR=VALUE]...
729 To assign environment variables (e.g., CC, CFLAGS...), specify them as
730 VAR=VALUE. See below for descriptions of some of the useful variables.
732 Defaults for the options are specified in brackets.
735 -h, --help display this help and exit
736 --help=short display options specific to this package
737 --help=recursive display the short help of all the included packages
738 -V, --version display version information and exit
739 -q, --quiet, --silent do not print \`checking...' messages
740 --cache-file=FILE cache test results in FILE [disabled]
741 -C, --config-cache alias for \`--cache-file=config.cache'
742 -n, --no-create do not create output files
743 --srcdir=DIR find the sources in DIR [configure dir or \`..']
748 Installation directories:
749 --prefix=PREFIX install architecture-independent files in PREFIX
751 --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
754 By default, \`make install' will install all the files in
755 \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
756 an installation prefix other than \`$ac_default_prefix' using \`--prefix',
757 for instance \`--prefix=\$HOME'.
759 For better control, use the options below.
761 Fine tuning of the installation directories:
762 --bindir=DIR user executables [EPREFIX/bin]
763 --sbindir=DIR system admin executables [EPREFIX/sbin]
764 --libexecdir=DIR program executables [EPREFIX/libexec]
765 --datadir=DIR read-only architecture-independent data [PREFIX/share]
766 --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
767 --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
768 --localstatedir=DIR modifiable single-machine data [PREFIX/var]
769 --libdir=DIR object code libraries [EPREFIX/lib]
770 --includedir=DIR C header files [PREFIX/include]
771 --oldincludedir=DIR C header files for non-gcc [/usr/include]
772 --infodir=DIR info documentation [PREFIX/info]
773 --mandir=DIR man documentation [PREFIX/man]
779 --build=BUILD configure for building on BUILD [guessed]
780 --host=HOST cross-compile to build programs to run on HOST [BUILD]
781 --target=TARGET configure for building compilers for TARGET [HOST]
785 if test -n "$ac_init_help"; then
790 --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
791 --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
792 --enable-maintainer-mode
793 enable make rules and dependencies not useful (and
794 sometimes confusing) to the casual installer
799 if test "$ac_init_help" = "recursive"; then
800 # If there are subdirs, report their specific --help.
802 for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
803 test -d $ac_dir || continue
806 if test "$ac_dir" != .; then
807 ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
808 # A "../" for each directory in $ac_dir_suffix.
809 ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
811 ac_dir_suffix= ac_top_builddir=
815 .) # No --srcdir option. We are building in place.
817 if test -z "$ac_top_builddir"; then
820 ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
822 [\\/]* | ?:[\\/]* ) # Absolute path.
823 ac_srcdir=$srcdir$ac_dir_suffix;
824 ac_top_srcdir=$srcdir ;;
826 ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
827 ac_top_srcdir=$ac_top_builddir$srcdir ;;
830 # Do not use `cd foo && pwd` to compute absolute paths, because
831 # the directories may not exist.
833 .) ac_abs_builddir="$ac_dir";;
836 .) ac_abs_builddir=`pwd`;;
837 [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
838 *) ac_abs_builddir=`pwd`/"$ac_dir";;
841 case $ac_abs_builddir in
842 .) ac_abs_top_builddir=${ac_top_builddir}.;;
844 case ${ac_top_builddir}. in
845 .) ac_abs_top_builddir=$ac_abs_builddir;;
846 [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
847 *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
850 case $ac_abs_builddir in
851 .) ac_abs_srcdir=$ac_srcdir;;
854 .) ac_abs_srcdir=$ac_abs_builddir;;
855 [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
856 *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
859 case $ac_abs_builddir in
860 .) ac_abs_top_srcdir=$ac_top_srcdir;;
862 case $ac_top_srcdir in
863 .) ac_abs_top_srcdir=$ac_abs_builddir;;
864 [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
865 *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
870 # Check for guested configure; otherwise get Cygnus style configure.
871 if test -f $ac_srcdir/configure.gnu; then
873 $SHELL $ac_srcdir/configure.gnu --help=recursive
874 elif test -f $ac_srcdir/configure; then
876 $SHELL $ac_srcdir/configure --help=recursive
877 elif test -f $ac_srcdir/configure.ac ||
878 test -f $ac_srcdir/configure.in; then
882 echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
888 test -n "$ac_init_help" && exit 0
889 if $ac_init_version; then
892 Copyright (C) 2003 Free Software Foundation, Inc.
893 This configure script is free software; the Free Software Foundation
894 gives unlimited permission to copy, distribute and modify it.
900 This file contains any messages produced by compilers while
901 running configure, to aid debugging if configure makes a mistake.
903 It was created by $as_me, which was
904 generated by GNU Autoconf 2.59. Invocation command line was
915 hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
916 uname -m = `(uname -m) 2>/dev/null || echo unknown`
917 uname -r = `(uname -r) 2>/dev/null || echo unknown`
918 uname -s = `(uname -s) 2>/dev/null || echo unknown`
919 uname -v = `(uname -v) 2>/dev/null || echo unknown`
921 /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
922 /bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
924 /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
925 /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
926 /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
927 hostinfo = `(hostinfo) 2>/dev/null || echo unknown`
928 /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
929 /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
930 /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
934 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
938 test -z "$as_dir" && as_dir=.
954 # Keep a trace of the command line.
955 # Strip out --no-create and --no-recursion so they do not pile up.
956 # Strip out --silent because we don't want to record it for future runs.
957 # Also quote any args containing shell meta-characters.
958 # Make two passes to allow for proper duplicate-argument suppression.
963 ac_must_keep_next=false
969 -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
970 -q | -quiet | --quiet | --quie | --qui | --qu | --q \
971 | -silent | --silent | --silen | --sile | --sil)
973 *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
974 ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
977 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
979 ac_configure_args1="$ac_configure_args1 '$ac_arg'"
980 if test $ac_must_keep_next = true; then
981 ac_must_keep_next=false # Got value, back to normal.
984 *=* | --config-cache | -C | -disable-* | --disable-* \
985 | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
986 | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
987 | -with-* | --with-* | -without-* | --without-* | --x)
988 case "$ac_configure_args0 " in
989 "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
992 -* ) ac_must_keep_next=true ;;
995 ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
996 # Get rid of the leading space.
1002 $as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
1003 $as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
1005 # When interrupted or exit'd, cleanup temporary files, and complete
1006 # config.log. We remove comments because anyway the quotes in there
1007 # would cause problems or look ugly.
1008 # WARNING: Be sure not to use single quotes in there, as some shells,
1009 # such as our DU 5.0 friend, will then `close' the trap.
1010 trap 'exit_status=$?
1011 # Save into config.log some information that might help in debugging.
1016 ## ---------------- ##
1017 ## Cache variables. ##
1018 ## ---------------- ##
1021 # The following way of writing the cache mishandles newlines in values,
1024 case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
1027 "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
1028 s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
1032 "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
1039 ## ----------------- ##
1040 ## Output variables. ##
1041 ## ----------------- ##
1044 for ac_var in $ac_subst_vars
1046 eval ac_val=$`echo $ac_var`
1047 echo "$ac_var='"'"'$ac_val'"'"'"
1051 if test -n "$ac_subst_files"; then
1058 for ac_var in $ac_subst_files
1060 eval ac_val=$`echo $ac_var`
1061 echo "$ac_var='"'"'$ac_val'"'"'"
1066 if test -s confdefs.h; then
1073 sed "/^$/d" confdefs.h | sort
1076 test "$ac_signal" != 0 &&
1077 echo "$as_me: caught signal $ac_signal"
1078 echo "$as_me: exit $exit_status"
1080 rm -f core *.core &&
1081 rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
1084 for ac_signal in 1 2 13 15; do
1085 trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
1089 # confdefs.h avoids OS command line length limits that DEFS can exceed.
1090 rm -rf conftest* confdefs.h
1091 # AIX cpp loses on an empty file, so make sure it contains at least a newline.
1094 # Predefined preprocessor variables.
1096 cat >>confdefs.h <<_ACEOF
1097 #define PACKAGE_NAME "$PACKAGE_NAME"
1101 cat >>confdefs.h <<_ACEOF
1102 #define PACKAGE_TARNAME "$PACKAGE_TARNAME"
1106 cat >>confdefs.h <<_ACEOF
1107 #define PACKAGE_VERSION "$PACKAGE_VERSION"
1111 cat >>confdefs.h <<_ACEOF
1112 #define PACKAGE_STRING "$PACKAGE_STRING"
1116 cat >>confdefs.h <<_ACEOF
1117 #define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
1121 # Let the site file select an alternate cache file if it wants to.
1122 # Prefer explicitly selected file to automatically selected ones.
1123 if test -z "$CONFIG_SITE"; then
1124 if test "x$prefix" != xNONE; then
1125 CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
1127 CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
1130 for ac_site_file in $CONFIG_SITE; do
1131 if test -r "$ac_site_file"; then
1132 { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
1133 echo "$as_me: loading site script $ac_site_file" >&6;}
1134 sed 's/^/| /' "$ac_site_file" >&5
1139 if test -r "$cache_file"; then
1140 # Some versions of bash will fail to source /dev/null (special
1141 # files actually), so we avoid doing that.
1142 if test -f "$cache_file"; then
1143 { echo "$as_me:$LINENO: loading cache $cache_file" >&5
1144 echo "$as_me: loading cache $cache_file" >&6;}
1146 [\\/]* | ?:[\\/]* ) . $cache_file;;
1147 *) . ./$cache_file;;
1151 { echo "$as_me:$LINENO: creating cache $cache_file" >&5
1152 echo "$as_me: creating cache $cache_file" >&6;}
1156 # Check that the precious variables saved in the cache have kept the same
1158 ac_cache_corrupted=false
1159 for ac_var in `(set) 2>&1 |
1160 sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
1161 eval ac_old_set=\$ac_cv_env_${ac_var}_set
1162 eval ac_new_set=\$ac_env_${ac_var}_set
1163 eval ac_old_val="\$ac_cv_env_${ac_var}_value"
1164 eval ac_new_val="\$ac_env_${ac_var}_value"
1165 case $ac_old_set,$ac_new_set in
1167 { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
1168 echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
1169 ac_cache_corrupted=: ;;
1171 { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
1172 echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
1173 ac_cache_corrupted=: ;;
1176 if test "x$ac_old_val" != "x$ac_new_val"; then
1177 # differences in whitespace do not lead to failure.
1178 ac_old_val_w=`echo x $ac_old_val`
1179 ac_new_val_w=`echo x $ac_new_val`
1180 if test "$ac_old_val_w" != "$ac_new_val_w"; then
1181 { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
1182 echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
1183 ac_cache_corrupted=:
1185 { echo "$as_me:$LINENO: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
1186 echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
1187 eval $ac_var=\$ac_old_val
1189 { echo "$as_me:$LINENO: former value: \`$ac_old_val'" >&5
1190 echo "$as_me: former value: \`$ac_old_val'" >&2;}
1191 { echo "$as_me:$LINENO: current value: \`$ac_new_val'" >&5
1192 echo "$as_me: current value: \`$ac_new_val'" >&2;}
1195 # Pass precious variables to config.status.
1196 if test "$ac_new_set" = set; then
1198 *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
1199 ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
1200 *) ac_arg=$ac_var=$ac_new_val ;;
1202 case " $ac_configure_args " in
1203 *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
1204 *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
1208 if $ac_cache_corrupted; then
1209 { echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
1210 echo "$as_me: error: in \`$ac_pwd':" >&2;}
1211 { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
1212 echo "$as_me: error: changes in the environment can compromise the build" >&2;}
1213 { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
1214 echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
1215 { (exit 1); exit 1; }; }
1219 ac_cpp='$CPP $CPPFLAGS'
1220 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
1221 ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
1222 ac_compiler_gnu=$ac_cv_c_compiler_gnu
1249 # Command-line options.
1250 # Very limited version of AC_MAINTAINER_MODE.
1251 # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
1252 if test "${enable_maintainer_mode+set}" = set; then
1253 enableval="$enable_maintainer_mode"
1254 case ${enable_maintainer_mode} in
1257 *) { { echo "$as_me:$LINENO: error: --enable-maintainer-mode must be yes or no" >&5
1258 echo "$as_me: error: --enable-maintainer-mode must be yes or no" >&2;}
1259 { (exit 1); exit 1; }; } ;;
1261 maintainer_mode=${enableval}
1266 # Start of actual configure tests
1269 for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
1270 if test -f $ac_dir/install-sh; then
1272 ac_install_sh="$ac_aux_dir/install-sh -c"
1274 elif test -f $ac_dir/install.sh; then
1276 ac_install_sh="$ac_aux_dir/install.sh -c"
1278 elif test -f $ac_dir/shtool; then
1280 ac_install_sh="$ac_aux_dir/shtool install -c"
1284 if test -z "$ac_aux_dir"; then
1285 { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
1286 echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
1287 { (exit 1); exit 1; }; }
1289 ac_config_guess="$SHELL $ac_aux_dir/config.guess"
1290 ac_config_sub="$SHELL $ac_aux_dir/config.sub"
1291 ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
1293 # Find a good install program. We prefer a C program (faster),
1294 # so one script is as good as another. But avoid the broken or
1295 # incompatible versions:
1296 # SysV /etc/install, /usr/sbin/install
1297 # SunOS /usr/etc/install
1298 # IRIX /sbin/install
1300 # AmigaOS /C/install, which installs bootblocks on floppy discs
1301 # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
1302 # AFS /usr/afsws/bin/install, which mishandles nonexistent args
1303 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
1304 # OS/2's system install, which has a completely different semantic
1305 # ./install, which can be erroneously created by make from ./install.sh.
1306 echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
1307 echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
1308 if test -z "$INSTALL"; then
1309 if test "${ac_cv_path_install+set}" = set; then
1310 echo $ECHO_N "(cached) $ECHO_C" >&6
1312 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1316 test -z "$as_dir" && as_dir=.
1317 # Account for people who put trailing slashes in PATH elements.
1319 ./ | .// | /cC/* | \
1320 /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
1321 ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
1324 # OSF1 and SCO ODT 3.0 have their own names for install.
1325 # Don't use installbsd from OSF since it installs stuff as root
1327 for ac_prog in ginstall scoinst install; do
1328 for ac_exec_ext in '' $ac_executable_extensions; do
1329 if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
1330 if test $ac_prog = install &&
1331 grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
1332 # AIX install. It has an incompatible calling convention.
1334 elif test $ac_prog = install &&
1335 grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
1336 # program-specific install script used by HP pwplus--don't use.
1339 ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
1351 if test "${ac_cv_path_install+set}" = set; then
1352 INSTALL=$ac_cv_path_install
1354 # As a last resort, use the slow shell script. We don't cache a
1355 # path for INSTALL within a source directory, because that will
1356 # break other packages using the cache if that directory is
1357 # removed, or if the path is relative.
1358 INSTALL=$ac_install_sh
1361 echo "$as_me:$LINENO: result: $INSTALL" >&5
1362 echo "${ECHO_T}$INSTALL" >&6
1364 # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
1365 # It thinks the first close brace ends the variable substitution.
1366 test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
1368 test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
1370 test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
1373 # Make sure we can run config.sub.
1374 $ac_config_sub sun4 >/dev/null 2>&1 ||
1375 { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
1376 echo "$as_me: error: cannot run $ac_config_sub" >&2;}
1377 { (exit 1); exit 1; }; }
1379 echo "$as_me:$LINENO: checking build system type" >&5
1380 echo $ECHO_N "checking build system type... $ECHO_C" >&6
1381 if test "${ac_cv_build+set}" = set; then
1382 echo $ECHO_N "(cached) $ECHO_C" >&6
1384 ac_cv_build_alias=$build_alias
1385 test -z "$ac_cv_build_alias" &&
1386 ac_cv_build_alias=`$ac_config_guess`
1387 test -z "$ac_cv_build_alias" &&
1388 { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
1389 echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
1390 { (exit 1); exit 1; }; }
1391 ac_cv_build=`$ac_config_sub $ac_cv_build_alias` ||
1392 { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5
1393 echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;}
1394 { (exit 1); exit 1; }; }
1397 echo "$as_me:$LINENO: result: $ac_cv_build" >&5
1398 echo "${ECHO_T}$ac_cv_build" >&6
1400 build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
1401 build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
1402 build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
1405 echo "$as_me:$LINENO: checking host system type" >&5
1406 echo $ECHO_N "checking host system type... $ECHO_C" >&6
1407 if test "${ac_cv_host+set}" = set; then
1408 echo $ECHO_N "(cached) $ECHO_C" >&6
1410 ac_cv_host_alias=$host_alias
1411 test -z "$ac_cv_host_alias" &&
1412 ac_cv_host_alias=$ac_cv_build_alias
1413 ac_cv_host=`$ac_config_sub $ac_cv_host_alias` ||
1414 { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5
1415 echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;}
1416 { (exit 1); exit 1; }; }
1419 echo "$as_me:$LINENO: result: $ac_cv_host" >&5
1420 echo "${ECHO_T}$ac_cv_host" >&6
1422 host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
1423 host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
1424 host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
1427 echo "$as_me:$LINENO: checking target system type" >&5
1428 echo $ECHO_N "checking target system type... $ECHO_C" >&6
1429 if test "${ac_cv_target+set}" = set; then
1430 echo $ECHO_N "(cached) $ECHO_C" >&6
1432 ac_cv_target_alias=$target_alias
1433 test "x$ac_cv_target_alias" = "x" &&
1434 ac_cv_target_alias=$ac_cv_host_alias
1435 ac_cv_target=`$ac_config_sub $ac_cv_target_alias` ||
1436 { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_target_alias failed" >&5
1437 echo "$as_me: error: $ac_config_sub $ac_cv_target_alias failed" >&2;}
1438 { (exit 1); exit 1; }; }
1441 echo "$as_me:$LINENO: result: $ac_cv_target" >&5
1442 echo "${ECHO_T}$ac_cv_target" >&6
1443 target=$ac_cv_target
1444 target_cpu=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
1445 target_vendor=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
1446 target_os=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
1449 # The aliases save the names the user supplied, while $host etc.
1450 # will get canonicalized.
1451 test -n "$target_alias" &&
1452 test "$program_prefix$program_suffix$program_transform_name" = \
1454 program_prefix=${target_alias}-
1456 case ${build_alias} in
1457 "") build_noncanonical=${build} ;;
1458 *) build_noncanonical=${build_alias} ;;
1461 case ${host_alias} in
1462 "") host_noncanonical=${build_noncanonical} ;;
1463 *) host_noncanonical=${host_alias} ;;
1466 case ${target_alias} in
1467 "") target_noncanonical=${host_noncanonical} ;;
1468 *) target_noncanonical=${target_alias} ;;
1474 # Need to pass this down for now :-P
1475 echo "$as_me:$LINENO: checking whether ln -s works" >&5
1476 echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6
1478 if test "$LN_S" = "ln -s"; then
1479 echo "$as_me:$LINENO: result: yes" >&5
1480 echo "${ECHO_T}yes" >&6
1482 echo "$as_me:$LINENO: result: no, using $LN_S" >&5
1483 echo "${ECHO_T}no, using $LN_S" >&6
1487 # Determine x_ada_cflags
1489 hppa*) x_ada_cflags=-mdisable-indexing ;;
1494 # Determine what to build for 'gnattools'
1495 if test $build = $target ; then
1496 # Note that build=target is almost certainly the wrong test; FIXME
1497 default_gnattools_target="gnattools-native"
1499 default_gnattools_target="gnattools-cross"
1503 # Target-specific stuff (defaults)
1509 # Per-target case statement
1510 # -------------------------
1512 alpha*-dec-vx*) # Unlike all other Vxworks
1515 | powerpc*-wrs-vxworks \
1519 TOOLS_TARGET_PAIRS="mlib-tgt-specific.adb<mlib-tgt-specific-vxworks.adb"
1522 TOOLS_TARGET_PAIRS="mlib-tgt-specific.adb<mlib-tgt-specific-solaris.adb"
1525 TOOLS_TARGET_PAIRS="mlib-tgt-specific.adb<mlib-tgt-specific-solaris.adb"
1528 | powerpc*-*-linux* \
1534 TOOLS_TARGET_PAIRS="\
1535 mlib-tgt-specific.adb<mlib-tgt-specific-linux.adb \
1536 indepsw.adb<indepsw-gnu.adb"
1539 TOOLS_TARGET_PAIRS="mlib-tgt-specific.adb<mlib-tgt-specific-linux.adb"
1542 TOOLS_TARGET_PAIRS="\
1543 mlib-tgt-specific.adb<mlib-tgt-specific-linux.adb \
1544 indepsw.adb<indepsw-gnu.adb"
1547 TOOLS_TARGET_PAIRS="mlib-tgt-specific.adb<mlib-tgt-specific-irix.adb"
1549 hppa*-hp-hpux10*) # Unlike hpux11
1552 TOOLS_TARGET_PAIRS="mlib-tgt-specific.adb<mlib-tgt-specific-hpux.adb"
1555 TOOLS_TARGET_PAIRS="\
1556 mlib-tgt-specific.adb<mlib-tgt-specific-aix.adb \
1557 indepsw.adb<indepsw-aix.adb"
1560 TOOLS_TARGET_PAIRS="mlib-tgt-specific.adb<mlib-tgt-specific-tru64.adb"
1562 alpha*-dec-vms* | alpha*-dec-openvms* | alpha*-dec-vms* \
1563 | alpha*-hp-vms* | alpha*-hp-openvms* | alpha*-hp-vms*)
1564 TOOLS_TARGET_PAIRS="\
1565 mlib-tgt-specific.adb<mlib-tgt-specific-vms-alpha.adb \
1566 symbols.adb<symbols-vms.adb \
1567 symbols-processing.adb<symbols-processing-vms-alpha.adb"
1569 EXTRA_GNATTOOLS='../../gnatlbr$(exeext) ../../gnatsym$(exeext)'
1571 ia64*-dec-vms* | ia64*-dec-openvms* | ia64*-dec-vms* \
1572 | ia64*-hp-vms* | ia64*-hp-openvms* | ia64*-hp-vms*)
1573 TOOLS_TARGET_PAIRS="\
1574 mlib-tgt-specific.adb<mlib-tgt-specific-vms-ia64.adb \
1575 symbols.adb<symbols-vms.adb \
1576 symbols-processing.adb<symbols-processing-vms-ia64.adb"
1578 EXTRA_GNATTOOLS='../../gnatlbr$(exeext) ../../gnatsym$(exeext)'
1580 *-*-cygwin32* | *-*-mingw32* | *-*-pe)
1581 TOOLS_TARGET_PAIRS="\
1582 mlib-tgt-specific.adb<mlib-tgt-specific-mingw.adb \
1583 indepsw.adb<indepsw-mingw.adb"
1584 EXTRA_GNATTOOLS='../../gnatdll$(exeext)'
1586 powerpc-*-darwin* | *86-*-darwin*)
1587 TOOLS_TARGET_PAIRS="mlib-tgt-specific.adb<mlib-tgt-specific-darwin.adb"
1590 TOOLS_TARGET_PAIRS="\
1591 mlib-tgt-specific.adb<mlib-tgt-specific-lynxos.adb \
1592 indepsw.adb<indepsw-gnu.adb"
1596 # Output: create a Makefile.
1597 ac_config_files="$ac_config_files Makefile"
1600 cat >confcache <<\_ACEOF
1601 # This file is a shell script that caches the results of configure
1602 # tests run on this system so they can be shared between configure
1603 # scripts and configure runs, see configure's option --config-cache.
1604 # It is not useful on other systems. If it contains results you don't
1605 # want to keep, you may remove or edit it.
1607 # config.status only pays attention to the cache file if you give it
1608 # the --recheck option to rerun configure.
1610 # `ac_cv_env_foo' variables (set or unset) will be overridden when
1611 # loading this file, other *unset* `ac_cv_foo' will be assigned the
1616 # The following way of writing the cache mishandles newlines in values,
1617 # but we know of no workaround that is simple, portable, and efficient.
1618 # So, don't put newlines in cache variables' values.
1619 # Ultrix sh set writes to stderr and can't be redirected directly,
1620 # and sets the high bit in the cache file unless we assign to the vars.
1623 case `(ac_space=' '; set | grep ac_space) 2>&1` in
1625 # `set' does not quote correctly, so add quotes (double-quote
1626 # substitution turns \\\\ into \\, and sed turns \\ into \).
1629 s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
1632 # `set' quotes correctly as required by POSIX, so do not add quotes.
1634 "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
1641 s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
1643 /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
1645 if diff $cache_file confcache >/dev/null 2>&1; then :; else
1646 if test -w $cache_file; then
1647 test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
1648 cat confcache >$cache_file
1650 echo "not updating unwritable cache $cache_file"
1655 test "x$prefix" = xNONE && prefix=$ac_default_prefix
1656 # Let make expand exec_prefix.
1657 test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
1659 # VPATH may cause trouble with some makes, so we remove $(srcdir),
1660 # ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
1661 # trailing colons and then remove the whole line if VPATH becomes empty
1662 # (actually we leave an empty line to preserve line numbers).
1663 if test "x$srcdir" = x.; then
1664 ac_vpsub='/^[ ]*VPATH[ ]*=/{
1665 s/:*\$(srcdir):*/:/;
1666 s/:*\${srcdir}:*/:/;
1668 s/^\([^=]*=[ ]*\):*/\1/;
1674 # Transform confdefs.h into DEFS.
1675 # Protect against shell expansion while executing Makefile rules.
1676 # Protect against Makefile macro expansion.
1678 # If the first sed substitution is executed (which looks for macros that
1679 # take arguments), then we branch to the quote section. Otherwise,
1680 # look for a macro that doesn't take arguments.
1681 cat >confdef2opt.sed <<\_ACEOF
1684 s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g
1686 s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g
1690 s,[ `~#$^&*(){}\\|;'"<>?],\\&,g
1696 # We use echo to avoid assuming a particular line-breaking character.
1697 # The extra dot is to prevent the shell from consuming trailing
1698 # line-breaks from the sub-command output. A line-break within
1699 # single-quotes doesn't work because, if this script is created in a
1700 # platform that uses two characters for line-breaks (e.g., DOS), tr
1702 ac_LF_and_DOT=`echo; echo .`
1703 DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'`
1704 rm -f confdef2opt.sed
1709 for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
1710 # 1. Remove the extension, and $U if already installed.
1711 ac_i=`echo "$ac_i" |
1712 sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
1714 ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
1715 ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
1719 LTLIBOBJS=$ac_ltlibobjs
1723 : ${CONFIG_STATUS=./config.status}
1724 ac_clean_files_save=$ac_clean_files
1725 ac_clean_files="$ac_clean_files $CONFIG_STATUS"
1726 { echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
1727 echo "$as_me: creating $CONFIG_STATUS" >&6;}
1728 cat >$CONFIG_STATUS <<_ACEOF
1730 # Generated by $as_me.
1731 # Run this file to recreate the current configuration.
1732 # Compiler output produced by configure, useful for debugging
1733 # configure, is in config.log if it exists.
1738 SHELL=\${CONFIG_SHELL-$SHELL}
1741 cat >>$CONFIG_STATUS <<\_ACEOF
1742 ## --------------------- ##
1743 ## M4sh Initialization. ##
1744 ## --------------------- ##
1746 # Be Bourne compatible
1747 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
1750 # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
1751 # is contrary to our usage. Disable this feature.
1752 alias -g '${1+"$@"}'='"$@"'
1753 elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
1756 DUALCASE=1; export DUALCASE # for MKS sh
1758 # Support unset when possible.
1759 if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
1766 # Work around bugs in pre-3.0 UWIN ksh.
1767 $as_unset ENV MAIL MAILPATH
1774 LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
1775 LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
1776 LC_TELEPHONE LC_TIME
1778 if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
1779 eval $as_var=C; export $as_var
1785 # Required to use basename.
1786 if expr a : '\(a\)' >/dev/null 2>&1; then
1792 if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
1793 as_basename=basename
1799 # Name of the executable.
1800 as_me=`$as_basename "$0" ||
1801 $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
1802 X"$0" : 'X\(//\)$' \| \
1803 X"$0" : 'X\(/\)$' \| \
1804 . : '\(.\)' 2>/dev/null ||
1806 sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
1807 /^X\/\(\/\/\)$/{ s//\1/; q; }
1808 /^X\/\(\/\).*/{ s//\1/; q; }
1812 # PATH needs CR, and LINENO needs CR and PATH.
1813 # Avoid depending upon Character Ranges.
1814 as_cr_letters='abcdefghijklmnopqrstuvwxyz'
1815 as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
1816 as_cr_Letters=$as_cr_letters$as_cr_LETTERS
1817 as_cr_digits='0123456789'
1818 as_cr_alnum=$as_cr_Letters$as_cr_digits
1820 # The user is always right.
1821 if test "${PATH_SEPARATOR+set}" != set; then
1822 echo "#! /bin/sh" >conf$$.sh
1823 echo "exit 0" >>conf$$.sh
1825 if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
1836 as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
1837 test "x$as_lineno_1" != "x$as_lineno_2" &&
1838 test "x$as_lineno_3" = "x$as_lineno_2" || {
1839 # Find who we are. Look in the path if we contain no path at all
1842 *[\\/]* ) as_myself=$0 ;;
1843 *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1847 test -z "$as_dir" && as_dir=.
1848 test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
1853 # We did not find ourselves, most probably we were run as `sh COMMAND'
1854 # in which case we are not to be found in the path.
1855 if test "x$as_myself" = x; then
1858 if test ! -f "$as_myself"; then
1859 { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
1860 echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
1861 { (exit 1); exit 1; }; }
1863 case $CONFIG_SHELL in
1865 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
1866 for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
1869 test -z "$as_dir" && as_dir=.
1870 for as_base in sh bash ksh sh5; do
1873 if ("$as_dir/$as_base" -c '
1876 as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
1877 test "x$as_lineno_1" != "x$as_lineno_2" &&
1878 test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
1879 $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
1880 $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
1881 CONFIG_SHELL=$as_dir/$as_base
1883 exec "$CONFIG_SHELL" "$0" ${1+"$@"}
1891 # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
1892 # uniformly replaced by the line number. The first 'sed' inserts a
1893 # line-number line before each line; the second 'sed' does the real
1894 # work. The second script uses 'N' to pair each line-number line
1895 # with the numbered line, and appends trailing '-' during
1896 # substitution so that $LINENO is not a special case at line end.
1897 # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
1898 # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
1899 sed '=' <$as_myself |
1904 s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
1907 s,^['$as_cr_digits']*\n,,
1909 chmod +x $as_me.lineno ||
1910 { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
1911 echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
1912 { (exit 1); exit 1; }; }
1914 # Don't try to exec as it changes $[0], causing all sort of problems
1915 # (the dirname of $[0] is not the place where we might find the
1916 # original and so on. Autoconf is especially sensible to this).
1918 # Exit status is that of the last command.
1923 case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
1924 *c*,-n*) ECHO_N= ECHO_C='
1926 *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
1927 *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
1930 if expr a : '\(a\)' >/dev/null 2>&1; then
1936 rm -f conf$$ conf$$.exe conf$$.file
1938 if ln -s conf$$.file conf$$ 2>/dev/null; then
1939 # We could just check for DJGPP; but this test a) works b) is more generic
1940 # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
1941 if test -f conf$$.exe; then
1942 # Don't use ln at all; we don't have any links
1947 elif ln conf$$.file conf$$ 2>/dev/null; then
1952 rm -f conf$$ conf$$.exe conf$$.file
1954 if mkdir -p . 2>/dev/null; then
1957 test -d ./-p && rmdir ./-p
1961 as_executable_p="test -f"
1963 # Sed expression to map a string onto a valid CPP name.
1964 as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
1966 # Sed expression to map a string onto a valid variable name.
1967 as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
1971 # We need space, tab and new line, in precisely that order.
1981 # Open the log real soon, to keep \$[0] and so on meaningful, and to
1982 # report actual input values of CONFIG_FILES etc. instead of their
1983 # values after options handling. Logging --version etc. is OK.
1987 sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
1988 ## Running $as_me. ##
1993 This file was extended by $as_me, which was
1994 generated by GNU Autoconf 2.59. Invocation command line was
1996 CONFIG_FILES = $CONFIG_FILES
1997 CONFIG_HEADERS = $CONFIG_HEADERS
1998 CONFIG_LINKS = $CONFIG_LINKS
1999 CONFIG_COMMANDS = $CONFIG_COMMANDS
2003 echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
2007 # Files that config.status was made for.
2008 if test -n "$ac_config_files"; then
2009 echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
2012 if test -n "$ac_config_headers"; then
2013 echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
2016 if test -n "$ac_config_links"; then
2017 echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
2020 if test -n "$ac_config_commands"; then
2021 echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
2024 cat >>$CONFIG_STATUS <<\_ACEOF
2027 \`$as_me' instantiates files from templates according to the
2028 current configuration.
2030 Usage: $0 [OPTIONS] [FILE]...
2032 -h, --help print this help, then exit
2033 -V, --version print version number, then exit
2034 -q, --quiet do not print progress messages
2035 -d, --debug don't remove temporary files
2036 --recheck update $as_me by reconfiguring in the same conditions
2037 --file=FILE[:TEMPLATE]
2038 instantiate the configuration file FILE
2040 Configuration files:
2043 Report bugs to <bug-autoconf@gnu.org>."
2046 cat >>$CONFIG_STATUS <<_ACEOF
2049 configured by $0, generated by GNU Autoconf 2.59,
2050 with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
2052 Copyright (C) 2003 Free Software Foundation, Inc.
2053 This config.status script is free software; the Free Software Foundation
2054 gives unlimited permission to copy, distribute and modify it."
2059 cat >>$CONFIG_STATUS <<\_ACEOF
2060 # If no file are specified by the user, then we need to provide default
2061 # value. By we need to know if files were specified by the user.
2067 ac_option=`expr "x$1" : 'x\([^=]*\)='`
2068 ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
2076 *) # This is not an option, so the user has probably given explicit
2079 ac_need_defaults=false;;
2083 # Handling of the options.
2085 cat >>$CONFIG_STATUS <<\_ACEOF
2086 -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
2088 --version | --vers* | -V )
2089 echo "$ac_cs_version"; exit 0 ;;
2091 # Conflict between --help and --header
2092 { { echo "$as_me:$LINENO: error: ambiguous option: $1
2093 Try \`$0 --help' for more information." >&5
2094 echo "$as_me: error: ambiguous option: $1
2095 Try \`$0 --help' for more information." >&2;}
2096 { (exit 1); exit 1; }; };;
2097 --help | --hel | -h )
2098 echo "$ac_cs_usage"; exit 0 ;;
2099 --debug | --d* | -d )
2101 --file | --fil | --fi | --f )
2103 CONFIG_FILES="$CONFIG_FILES $ac_optarg"
2104 ac_need_defaults=false;;
2105 --header | --heade | --head | --hea )
2107 CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
2108 ac_need_defaults=false;;
2109 -q | -quiet | --quiet | --quie | --qui | --qu | --q \
2110 | -silent | --silent | --silen | --sile | --sil | --si | --s)
2114 -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
2115 Try \`$0 --help' for more information." >&5
2116 echo "$as_me: error: unrecognized option: $1
2117 Try \`$0 --help' for more information." >&2;}
2118 { (exit 1); exit 1; }; } ;;
2120 *) ac_config_targets="$ac_config_targets $1" ;;
2126 ac_configure_extra_args=
2128 if $ac_cs_silent; then
2130 ac_configure_extra_args="$ac_configure_extra_args --silent"
2134 cat >>$CONFIG_STATUS <<_ACEOF
2135 if \$ac_cs_recheck; then
2136 echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
2137 exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
2146 cat >>$CONFIG_STATUS <<\_ACEOF
2147 for ac_config_target in $ac_config_targets
2149 case "$ac_config_target" in
2150 # Handling of arguments.
2151 "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
2152 *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
2153 echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
2154 { (exit 1); exit 1; }; };;
2158 # If the user did not use the arguments to specify the items to instantiate,
2159 # then the envvar interface is used. Set only those that are not.
2160 # We use the long form for the default assignment because of an extremely
2161 # bizarre bug on SunOS 4.1.3.
2162 if $ac_need_defaults; then
2163 test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
2166 # Have a temporary directory for convenience. Make it in the build tree
2167 # simply because there is no reason to put it here, and in addition,
2168 # creating and moving files from /tmp can sometimes cause problems.
2169 # Create a temporary directory, and hook for its removal unless debugging.
2172 trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
2173 trap '{ (exit 1); exit 1; }' 1 2 13 15
2176 # Create a (secure) tmp directory for tmp files.
2179 tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
2180 test -n "$tmp" && test -d "$tmp"
2183 tmp=./confstat$$-$RANDOM
2184 (umask 077 && mkdir $tmp)
2187 echo "$me: cannot create a temporary directory in ." >&2
2188 { (exit 1); exit 1; }
2193 cat >>$CONFIG_STATUS <<_ACEOF
2196 # CONFIG_FILES section.
2199 # No need to generate the scripts if there are no CONFIG_FILES.
2200 # This happens for instance when ./config.status config.h
2201 if test -n "\$CONFIG_FILES"; then
2202 # Protect against being on the right side of a sed subst in config.status.
2203 sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
2204 s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
2205 s,@SHELL@,$SHELL,;t t
2206 s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
2207 s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
2208 s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
2209 s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
2210 s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
2211 s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
2212 s,@exec_prefix@,$exec_prefix,;t t
2213 s,@prefix@,$prefix,;t t
2214 s,@program_transform_name@,$program_transform_name,;t t
2215 s,@bindir@,$bindir,;t t
2216 s,@sbindir@,$sbindir,;t t
2217 s,@libexecdir@,$libexecdir,;t t
2218 s,@datadir@,$datadir,;t t
2219 s,@sysconfdir@,$sysconfdir,;t t
2220 s,@sharedstatedir@,$sharedstatedir,;t t
2221 s,@localstatedir@,$localstatedir,;t t
2222 s,@libdir@,$libdir,;t t
2223 s,@includedir@,$includedir,;t t
2224 s,@oldincludedir@,$oldincludedir,;t t
2225 s,@infodir@,$infodir,;t t
2226 s,@mandir@,$mandir,;t t
2227 s,@build_alias@,$build_alias,;t t
2228 s,@host_alias@,$host_alias,;t t
2229 s,@target_alias@,$target_alias,;t t
2231 s,@ECHO_C@,$ECHO_C,;t t
2232 s,@ECHO_N@,$ECHO_N,;t t
2233 s,@ECHO_T@,$ECHO_T,;t t
2235 s,@MAINT@,$MAINT,;t t
2236 s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
2237 s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
2238 s,@INSTALL_DATA@,$INSTALL_DATA,;t t
2239 s,@build@,$build,;t t
2240 s,@build_cpu@,$build_cpu,;t t
2241 s,@build_vendor@,$build_vendor,;t t
2242 s,@build_os@,$build_os,;t t
2244 s,@host_cpu@,$host_cpu,;t t
2245 s,@host_vendor@,$host_vendor,;t t
2246 s,@host_os@,$host_os,;t t
2247 s,@target@,$target,;t t
2248 s,@target_cpu@,$target_cpu,;t t
2249 s,@target_vendor@,$target_vendor,;t t
2250 s,@target_os@,$target_os,;t t
2251 s,@target_noncanonical@,$target_noncanonical,;t t
2253 s,@x_ada_cflags@,$x_ada_cflags,;t t
2254 s,@default_gnattools_target@,$default_gnattools_target,;t t
2255 s,@TOOLS_TARGET_PAIRS@,$TOOLS_TARGET_PAIRS,;t t
2256 s,@EXTRA_GNATTOOLS@,$EXTRA_GNATTOOLS,;t t
2257 s,@LIBOBJS@,$LIBOBJS,;t t
2258 s,@LTLIBOBJS@,$LTLIBOBJS,;t t
2263 cat >>$CONFIG_STATUS <<\_ACEOF
2264 # Split the substitutions into bite-sized pieces for seds with
2265 # small command number limits, like on Digital OSF/1 and HP-UX.
2267 ac_sed_frag=1 # Number of current file.
2268 ac_beg=1 # First line for current file.
2269 ac_end=$ac_max_sed_lines # Line after last line for current file.
2272 while $ac_more_lines; do
2273 if test $ac_beg -gt 1; then
2274 sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
2276 sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
2278 if test ! -s $tmp/subs.frag; then
2281 # The purpose of the label and of the branching condition is to
2282 # speed up the sed processing (if there are no `@' at all, there
2283 # is no need to browse any of the substitutions).
2284 # These are the two extra sed commands mentioned above.
2286 /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
2287 if test -z "$ac_sed_cmds"; then
2288 ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
2290 ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
2292 ac_sed_frag=`expr $ac_sed_frag + 1`
2294 ac_end=`expr $ac_end + $ac_max_sed_lines`
2297 if test -z "$ac_sed_cmds"; then
2300 fi # test -n "$CONFIG_FILES"
2303 cat >>$CONFIG_STATUS <<\_ACEOF
2304 for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
2305 # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
2307 - | *:- | *:-:* ) # input from stdin
2309 ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
2310 ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
2311 *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
2312 ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
2313 * ) ac_file_in=$ac_file.in ;;
2316 # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
2317 ac_dir=`(dirname "$ac_file") 2>/dev/null ||
2318 $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
2319 X"$ac_file" : 'X\(//\)[^/]' \| \
2320 X"$ac_file" : 'X\(//\)$' \| \
2321 X"$ac_file" : 'X\(/\)' \| \
2322 . : '\(.\)' 2>/dev/null ||
2324 sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
2325 /^X\(\/\/\)[^/].*/{ s//\1/; q; }
2326 /^X\(\/\/\)$/{ s//\1/; q; }
2327 /^X\(\/\).*/{ s//\1/; q; }
2329 { if $as_mkdir_p; then
2334 while test ! -d "$as_dir"; do
2335 as_dirs="$as_dir $as_dirs"
2336 as_dir=`(dirname "$as_dir") 2>/dev/null ||
2337 $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
2338 X"$as_dir" : 'X\(//\)[^/]' \| \
2339 X"$as_dir" : 'X\(//\)$' \| \
2340 X"$as_dir" : 'X\(/\)' \| \
2341 . : '\(.\)' 2>/dev/null ||
2343 sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
2344 /^X\(\/\/\)[^/].*/{ s//\1/; q; }
2345 /^X\(\/\/\)$/{ s//\1/; q; }
2346 /^X\(\/\).*/{ s//\1/; q; }
2349 test ! -n "$as_dirs" || mkdir $as_dirs
2350 fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
2351 echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
2352 { (exit 1); exit 1; }; }; }
2356 if test "$ac_dir" != .; then
2357 ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
2358 # A "../" for each directory in $ac_dir_suffix.
2359 ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
2361 ac_dir_suffix= ac_top_builddir=
2365 .) # No --srcdir option. We are building in place.
2367 if test -z "$ac_top_builddir"; then
2370 ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
2372 [\\/]* | ?:[\\/]* ) # Absolute path.
2373 ac_srcdir=$srcdir$ac_dir_suffix;
2374 ac_top_srcdir=$srcdir ;;
2376 ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
2377 ac_top_srcdir=$ac_top_builddir$srcdir ;;
2380 # Do not use `cd foo && pwd` to compute absolute paths, because
2381 # the directories may not exist.
2383 .) ac_abs_builddir="$ac_dir";;
2386 .) ac_abs_builddir=`pwd`;;
2387 [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
2388 *) ac_abs_builddir=`pwd`/"$ac_dir";;
2391 case $ac_abs_builddir in
2392 .) ac_abs_top_builddir=${ac_top_builddir}.;;
2394 case ${ac_top_builddir}. in
2395 .) ac_abs_top_builddir=$ac_abs_builddir;;
2396 [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
2397 *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
2400 case $ac_abs_builddir in
2401 .) ac_abs_srcdir=$ac_srcdir;;
2404 .) ac_abs_srcdir=$ac_abs_builddir;;
2405 [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
2406 *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
2409 case $ac_abs_builddir in
2410 .) ac_abs_top_srcdir=$ac_top_srcdir;;
2412 case $ac_top_srcdir in
2413 .) ac_abs_top_srcdir=$ac_abs_builddir;;
2414 [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
2415 *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
2421 [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
2422 *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
2425 if test x"$ac_file" != x-; then
2426 { echo "$as_me:$LINENO: creating $ac_file" >&5
2427 echo "$as_me: creating $ac_file" >&6;}
2430 # Let's still pretend it is `configure' which instantiates (i.e., don't
2431 # use $as_me), people would be surprised to read:
2432 # /* config.h. Generated by config.status. */
2433 if test x"$ac_file" = x-; then
2436 configure_input="$ac_file. "
2438 configure_input=$configure_input"Generated from `echo $ac_file_in |
2439 sed 's,.*/,,'` by configure."
2441 # First look for the input files in the build tree, otherwise in the
2443 ac_file_inputs=`IFS=:
2444 for f in $ac_file_in; do
2446 -) echo $tmp/stdin ;;
2448 # Absolute (can't be DOS-style, as IFS=:)
2449 test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
2450 echo "$as_me: error: cannot find input file: $f" >&2;}
2451 { (exit 1); exit 1; }; }
2454 if test -f "$f"; then
2457 elif test -f "$srcdir/$f"; then
2462 { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
2463 echo "$as_me: error: cannot find input file: $f" >&2;}
2464 { (exit 1); exit 1; }; }
2467 done` || { (exit 1); exit 1; }
2469 cat >>$CONFIG_STATUS <<_ACEOF
2473 cat >>$CONFIG_STATUS <<\_ACEOF
2475 /@[a-zA-Z_][a-zA-Z_0-9]*@/!b
2476 s,@configure_input@,$configure_input,;t t
2477 s,@srcdir@,$ac_srcdir,;t t
2478 s,@abs_srcdir@,$ac_abs_srcdir,;t t
2479 s,@top_srcdir@,$ac_top_srcdir,;t t
2480 s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
2481 s,@builddir@,$ac_builddir,;t t
2482 s,@abs_builddir@,$ac_abs_builddir,;t t
2483 s,@top_builddir@,$ac_top_builddir,;t t
2484 s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
2485 s,@INSTALL@,$ac_INSTALL,;t t
2486 " $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
2488 if test x"$ac_file" != x-; then
2489 mv $tmp/out $ac_file
2498 cat >>$CONFIG_STATUS <<\_ACEOF
2500 { (exit 0); exit 0; }
2502 chmod +x $CONFIG_STATUS
2503 ac_clean_files=$ac_clean_files_save
2506 # configure is writing to config.log, and then calls config.status.
2507 # config.status does its own redirection, appending to config.log.
2508 # Unfortunately, on DOS this fails, as config.log is still kept open
2509 # by configure, so config.status won't be able to write to it; its
2510 # output is simply discarded. So we exec the FD to /dev/null,
2511 # effectively closing config.log, so it can be properly (re)opened and
2512 # appended to by config.status. When coming back to configure, we
2513 # need to make the FD available again.
2514 if test "$no_create" != yes; then
2516 ac_config_status_args=
2517 test "$silent" = yes &&
2518 ac_config_status_args="$ac_config_status_args --quiet"
2520 $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
2522 # Use ||, not &&, to avoid exiting from the if with $? = 1, which
2523 # would make configure fail if this is the last instruction.
2524 $ac_cs_success || { (exit 1); exit 1; }