OSDN Git Service

Add - before rms to be more portable.
[pf3gnuchains/gcc-fork.git] / gcc / sched-int.h
1 /* Instruction scheduling pass.  This file contains definitions used
2    internally in the scheduler.
3    Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998,
4    1999, 2000 Free Software Foundation, Inc.
5
6 This file is part of GNU CC.
7
8 GNU CC is free software; you can redistribute it and/or modify it
9 under the terms of the GNU General Public License as published by the
10 Free Software Foundation; either version 2, or (at your option) any
11 later version.
12
13 GNU CC is distributed in the hope that it will be useful, but WITHOUT
14 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
15 FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
16 for more details.
17
18 You should have received a copy of the GNU General Public License
19 along with GNU CC; see the file COPYING.  If not, write to the Free
20 the Free Software Foundation, 59 Temple Place - Suite 330, Boston, MA
21 02111-1307, USA.  */
22
23 /* Forward declaration.  */
24 struct ready_list;
25
26 /* Describe state of dependencies used during sched_analyze phase.  */
27 struct deps
28 {
29   /* The *_insns and *_mems are paired lists.  Each pending memory operation
30      will have a pointer to the MEM rtx on one list and a pointer to the
31      containing insn on the other list in the same place in the list.  */
32
33   /* We can't use add_dependence like the old code did, because a single insn
34      may have multiple memory accesses, and hence needs to be on the list
35      once for each memory access.  Add_dependence won't let you add an insn
36      to a list more than once.  */
37
38   /* An INSN_LIST containing all insns with pending read operations.  */
39   rtx pending_read_insns;
40
41   /* An EXPR_LIST containing all MEM rtx's which are pending reads.  */
42   rtx pending_read_mems;
43
44   /* An INSN_LIST containing all insns with pending write operations.  */
45   rtx pending_write_insns;
46
47   /* An EXPR_LIST containing all MEM rtx's which are pending writes.  */
48   rtx pending_write_mems;
49
50   /* Indicates the combined length of the two pending lists.  We must prevent
51      these lists from ever growing too large since the number of dependencies
52      produced is at least O(N*N), and execution time is at least O(4*N*N), as
53      a function of the length of these pending lists.  */
54   int pending_lists_length;
55
56   /* The last insn upon which all memory references must depend.
57      This is an insn which flushed the pending lists, creating a dependency
58      between it and all previously pending memory references.  This creates
59      a barrier (or a checkpoint) which no memory reference is allowed to cross.
60
61      This includes all non constant CALL_INSNs.  When we do interprocedural
62      alias analysis, this restriction can be relaxed.
63      This may also be an INSN that writes memory if the pending lists grow
64      too large.  */
65   rtx last_pending_memory_flush;
66
67   /* The last function call we have seen.  All hard regs, and, of course,
68      the last function call, must depend on this.  */
69   rtx last_function_call;
70
71   /* Used to keep post-call psuedo/hard reg movements together with
72      the call.  */
73   int in_post_call_group_p;
74
75   /* The LOG_LINKS field of this is a list of insns which use a pseudo
76      register that does not already cross a call.  We create
77      dependencies between each of those insn and the next call insn,
78      to ensure that they won't cross a call after scheduling is done.  */
79   rtx sched_before_next_call;
80
81   /* Element N is the next insn that sets (hard or pseudo) register
82      N within the current basic block; or zero, if there is no
83      such insn.  Needed for new registers which may be introduced
84      by splitting insns.  */
85   rtx *reg_last_uses;
86   rtx *reg_last_sets;
87   rtx *reg_last_clobbers;
88 };
89
90 /* This structure holds some state of the current scheduling pass, and
91    contains some function pointers that abstract out some of the non-generic
92    functionality from functions such as schedule_block or schedule_insn.
93    There is one global variable, current_sched_info, which points to the
94    sched_info structure currently in use.  */
95 struct sched_info
96 {
97   /* Add all insns that are initially ready to the ready list.  Called once
98      before scheduling a set of insns.  */
99   void (*init_ready_list) PARAMS ((struct ready_list *));
100   /* Called after taking an insn from the ready list.  Returns nonzero if
101      this insn can be scheduled, nonzero if we should silently discard it.  */
102   int (*can_schedule_ready_p) PARAMS ((rtx));
103   /* Return nonzero if there are more insns that should be scheduled.  */
104   int (*schedule_more_p) PARAMS ((void));
105   /* Called after an insn has all its dependencies resolved.  Return nonzero
106      if it should be moved to the ready list or the queue, or zero if we
107      should silently discard it.  */
108   int (*new_ready) PARAMS ((rtx));
109   /* Compare priority of two insns.  Return a positive number if the second
110      insn is to be preferred for scheduling, and a negative one if the first
111      is to be preferred.  Zero if they are equally good.  */
112   int (*rank) PARAMS ((rtx, rtx));
113   /* Return a string that contains the insn uid and optionally anything else
114      necessary to identify this insn in an output.  It's valid to use a
115      static buffer for this.  The ALIGNED parameter should cause the string
116      to be formatted so that multiple output lines will line up nicely.  */
117   const char *(*print_insn) PARAMS ((rtx, int));
118
119   /* The boundaries of the set of insns to be scheduled.  */
120   rtx prev_head, next_tail;
121
122   /* Filled in after the schedule is finished; the first and last scheduled
123      insns.  */
124   rtx head, tail;
125
126   /* If nonzero, enables an additional sanity check in schedule_block.  */
127   int queue_must_finish_empty;
128 };
129
130 extern struct sched_info *current_sched_info;
131
132 /* Indexed by INSN_UID, the collection of all data associated with
133    a single instruction.  */
134
135 struct haifa_insn_data
136 {
137   /* A list of insns which depend on the instruction.  Unlike LOG_LINKS,
138      it represents forward dependancies.  */
139   rtx depend;
140
141   /* The line number note in effect for each insn.  For line number
142      notes, this indicates whether the note may be reused.  */
143   rtx line_note;
144
145   /* Logical uid gives the original ordering of the insns.  */
146   int luid;
147
148   /* A priority for each insn.  */
149   int priority;
150
151   /* The number of incoming edges in the forward dependency graph.
152      As scheduling proceds, counts are decreased.  An insn moves to
153      the ready queue when its counter reaches zero.  */
154   int dep_count;
155
156   /* An encoding of the blockage range function.  Both unit and range
157      are coded.  */
158   unsigned int blockage;
159
160   /* Number of instructions referring to this insn.  */
161   int ref_count;
162
163   /* The minimum clock tick at which the insn becomes ready.  This is
164      used to note timing constraints for the insns in the pending list.  */
165   int tick;
166
167   short cost;
168
169   /* An encoding of the function units used.  */
170   short units;
171
172   /* This weight is an estimation of the insn's contribution to
173      register pressure.  */
174   short reg_weight;
175
176   /* Some insns (e.g. call) are not allowed to move across blocks.  */
177   unsigned int cant_move : 1;
178
179   /* Set if there's DEF-USE dependance between some speculatively
180      moved load insn and this one.  */
181   unsigned int fed_by_spec_load : 1;
182   unsigned int is_load_insn : 1;
183 };
184
185 extern struct haifa_insn_data *h_i_d;
186
187 /* Accessor macros for h_i_d.  There are more in haifa-sched.c and
188    sched-rgn.c.  */
189 #define INSN_DEPEND(INSN)       (h_i_d[INSN_UID (INSN)].depend)
190 #define INSN_LUID(INSN)         (h_i_d[INSN_UID (INSN)].luid)
191 #define CANT_MOVE(insn)         (h_i_d[INSN_UID (insn)].cant_move)
192 #define INSN_DEP_COUNT(INSN)    (h_i_d[INSN_UID (INSN)].dep_count)
193 #define INSN_PRIORITY(INSN)     (h_i_d[INSN_UID (INSN)].priority)
194 #define INSN_COST(INSN)         (h_i_d[INSN_UID (INSN)].cost)
195 #define INSN_UNIT(INSN)         (h_i_d[INSN_UID (INSN)].units)
196 #define INSN_REG_WEIGHT(INSN)   (h_i_d[INSN_UID (INSN)].reg_weight)
197
198 #define INSN_BLOCKAGE(INSN)     (h_i_d[INSN_UID (INSN)].blockage)
199 #define UNIT_BITS               5
200 #define BLOCKAGE_MASK           ((1 << BLOCKAGE_BITS) - 1)
201 #define ENCODE_BLOCKAGE(U, R)                   \
202   (((U) << BLOCKAGE_BITS                        \
203     | MIN_BLOCKAGE_COST (R)) << BLOCKAGE_BITS   \
204    | MAX_BLOCKAGE_COST (R))
205 #define UNIT_BLOCKED(B)         ((B) >> (2 * BLOCKAGE_BITS))
206 #define BLOCKAGE_RANGE(B)                                                \
207   (((((B) >> BLOCKAGE_BITS) & BLOCKAGE_MASK) << (HOST_BITS_PER_INT / 2)) \
208    | ((B) & BLOCKAGE_MASK))
209
210 /* Encodings of the `<name>_unit_blockage_range' function.  */
211 #define MIN_BLOCKAGE_COST(R) ((R) >> (HOST_BITS_PER_INT / 2))
212 #define MAX_BLOCKAGE_COST(R) ((R) & ((1 << (HOST_BITS_PER_INT / 2)) - 1))
213
214 extern FILE *sched_dump;
215 extern int sched_verbose;
216
217 #ifndef __GNUC__
218 #define __inline
219 #endif
220
221 #ifndef HAIFA_INLINE
222 #define HAIFA_INLINE __inline
223 #endif
224
225 /* Functions in sched-vis.c.  */
226 extern void init_target_units PARAMS ((void));
227 extern void insn_print_units PARAMS ((rtx));
228 extern void init_block_visualization PARAMS ((void));
229 extern void print_block_visualization PARAMS ((const char *));
230 extern void visualize_scheduled_insns PARAMS ((int));
231 extern void visualize_no_unit PARAMS ((rtx));
232 extern void visualize_stall_cycles PARAMS ((int));
233 extern void visualize_alloc PARAMS ((void));
234 extern void visualize_free PARAMS ((void));
235
236 /* Functions in sched-deps.c.  */
237 extern void add_dependence PARAMS ((rtx, rtx, enum reg_note));
238 extern void add_insn_mem_dependence PARAMS ((struct deps *, rtx *, rtx *, rtx,
239                                              rtx));
240 extern void sched_analyze PARAMS ((struct deps *, rtx, rtx));
241 extern void init_deps PARAMS ((struct deps *));
242 extern void free_deps PARAMS ((struct deps *));
243 extern void init_deps_global PARAMS ((void));
244 extern void finish_deps_global PARAMS ((void));
245 extern void compute_forward_dependences PARAMS ((rtx, rtx));
246 extern int find_insn_mem_list PARAMS ((rtx, rtx, rtx, rtx));
247 extern rtx find_insn_list PARAMS ((rtx, rtx));
248 extern void init_dependency_caches PARAMS ((int));
249 extern void free_dependency_caches PARAMS ((void));
250
251 /* Functions in haifa-sched.c.  */
252 extern void get_block_head_tail PARAMS ((int, rtx *, rtx *));
253 extern int no_real_insns_p PARAMS ((rtx, rtx));
254
255 extern void rm_line_notes PARAMS ((int));
256 extern void save_line_notes PARAMS ((int));
257 extern void restore_line_notes PARAMS ((int));
258 extern void rm_redundant_line_notes PARAMS ((void));
259 extern void rm_other_notes PARAMS ((rtx, rtx));
260
261 extern int insn_issue_delay PARAMS ((rtx));
262 extern int set_priorities PARAMS ((int));
263
264 extern void schedule_block PARAMS ((int, int));
265 extern void sched_init PARAMS ((FILE *));
266 extern void sched_finish PARAMS ((void));
267
268 extern void ready_add PARAMS ((struct ready_list *, rtx));
269
270 /* The following are exported for the benefit of debugging functions.  It
271    would be nicer to keep them private to haifa-sched.c.  */
272 extern int insn_unit PARAMS ((rtx));
273 extern int insn_cost PARAMS ((rtx, rtx, rtx));
274 extern rtx get_unit_last_insn PARAMS ((int));
275 extern int actual_hazard_this_instance PARAMS ((int, int, rtx, int, int));
276