1 /* This file contains the definitions and documentation for the
2 Register Transfer Expressions (rtx's) that make up the
3 Register Transfer Language (rtl) used in the Back End of the GNU compiler.
4 Copyright (C) 1987, 88, 92, 94, 95, 97, 98, 1999, 2000
5 Free Software Foundation, Inc.
7 This file is part of GCC.
9 GCC is free software; you can redistribute it and/or modify it under
10 the terms of the GNU General Public License as published by the Free
11 Software Foundation; either version 2, or (at your option) any later
14 GCC is distributed in the hope that it will be useful, but WITHOUT ANY
15 WARRANTY; without even the implied warranty of MERCHANTABILITY or
16 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
19 You should have received a copy of the GNU General Public License
20 along with GCC; see the file COPYING. If not, write to the Free
21 Software Foundation, 59 Temple Place - Suite 330, Boston, MA
25 /* Expression definitions and descriptions for all targets are in this file.
26 Some will not be used for some targets.
28 The fields in the cpp macro call "DEF_RTL_EXPR()"
29 are used to create declarations in the C source of the compiler.
33 1. The internal name of the rtx used in the C source.
34 It is a tag in the enumeration "enum rtx_code" defined in "rtl.h".
35 By convention these are in UPPER_CASE.
37 2. The name of the rtx in the external ASCII format read by
38 read_rtx(), and printed by print_rtx().
39 These names are stored in rtx_name[].
40 By convention these are the internal (field 1) names in lower_case.
42 3. The print format, and type of each rtx->fld[] (field) in this rtx.
43 These formats are stored in rtx_format[].
44 The meaning of the formats is documented in front of this array in rtl.c
46 4. The class of the rtx. These are stored in rtx_class and are accessed
47 via the GET_RTX_CLASS macro. They are defined as follows:
49 "o" an rtx code that can be used to represent an object (e.g, REG, MEM)
50 "<" an rtx code for a comparison (e.g, EQ, NE, LT)
51 "1" an rtx code for a unary arithmetic expression (e.g, NEG, NOT)
52 "c" an rtx code for a commutative binary operation (e.g,, PLUS, MULT)
53 "3" an rtx code for a non-bitfield three input operation (IF_THEN_ELSE)
54 "2" an rtx code for a non-commutative binary operation (e.g., MINUS, DIV)
55 "b" an rtx code for a bit-field operation (ZERO_EXTRACT, SIGN_EXTRACT)
56 "i" an rtx code for a machine insn (INSN, JUMP_INSN, CALL_INSN)
57 "m" an rtx code for something that matches in insns (e.g, MATCH_DUP)
58 "g" an rtx code for grouping insns together (e.g, GROUP_PARALLEL)
59 "a" an rtx code for autoincrement addressing modes (e.g. POST_DEC)
64 /* ---------------------------------------------------------------------
65 Expressions (and "meta" expressions) used for structuring the
66 rtl representation of a program.
67 --------------------------------------------------------------------- */
69 /* an expression code name unknown to the reader */
70 DEF_RTL_EXPR(UNKNOWN, "UnKnown", "*", 'x')
72 /* (NIL) is used by rtl reader and printer to represent a null pointer. */
74 DEF_RTL_EXPR(NIL, "nil", "*", 'x')
76 /* ---------------------------------------------------------------------
77 Expressions used in constructing lists.
78 --------------------------------------------------------------------- */
80 /* a linked list of expressions */
81 DEF_RTL_EXPR(EXPR_LIST, "expr_list", "ee", 'x')
83 /* a linked list of instructions.
84 The insns are represented in print by their uids. */
85 DEF_RTL_EXPR(INSN_LIST, "insn_list", "ue", 'x')
87 /* ----------------------------------------------------------------------
88 Expression types for machine descriptions.
89 These do not appear in actual rtl code in the compiler.
90 ---------------------------------------------------------------------- */
92 /* Appears only in machine descriptions.
93 Means use the function named by the second arg (the string)
94 as a predicate; if matched, store the structure that was matched
95 in the operand table at index specified by the first arg (the integer).
96 If the second arg is the null string, the structure is just stored.
98 A third string argument indicates to the register allocator restrictions
99 on where the operand can be allocated.
101 If the target needs no restriction on any instruction this field should
104 The string is prepended by:
105 '=' to indicate the operand is only written to.
106 '+' to indicate the operand is both read and written to.
108 Each character in the string represents an allocable class for an operand.
109 'g' indicates the operand can be any valid class.
110 'i' indicates the operand can be immediate (in the instruction) data.
111 'r' indicates the operand can be in a register.
112 'm' indicates the operand can be in memory.
113 'o' a subset of the 'm' class. Those memory addressing modes that
114 can be offset at compile time (have a constant added to them).
116 Other characters indicate target dependent operand classes and
117 are described in each target's machine description.
119 For instructions with more than one operand, sets of classes can be
120 separated by a comma to indicate the appropriate multi-operand constraints.
121 There must be a 1 to 1 correspondence between these sets of classes in
122 all operands for an instruction.
124 DEF_RTL_EXPR(MATCH_OPERAND, "match_operand", "iss", 'm')
126 /* Appears only in machine descriptions.
127 Means match a SCRATCH or a register. When used to generate rtl, a
128 SCRATCH is generated. As for MATCH_OPERAND, the mode specifies
129 the desired mode and the first argument is the operand number.
130 The second argument is the constraint. */
131 DEF_RTL_EXPR(MATCH_SCRATCH, "match_scratch", "is", 'm')
133 /* Appears only in machine descriptions.
134 Means match only something equal to what is stored in the operand table
135 at the index specified by the argument. */
136 DEF_RTL_EXPR(MATCH_DUP, "match_dup", "i", 'm')
138 /* Appears only in machine descriptions.
139 Means apply a predicate, AND match recursively the operands of the rtx.
140 Operand 0 is the operand-number, as in match_operand.
141 Operand 1 is a predicate to apply (as a string, a function name).
142 Operand 2 is a vector of expressions, each of which must match
143 one subexpression of the rtx this construct is matching. */
144 DEF_RTL_EXPR(MATCH_OPERATOR, "match_operator", "isE", 'm')
146 /* Appears only in machine descriptions.
147 Means to match a PARALLEL of arbitrary length. The predicate is applied
148 to the PARALLEL and the initial expressions in the PARALLEL are matched.
149 Operand 0 is the operand-number, as in match_operand.
150 Operand 1 is a predicate to apply to the PARALLEL.
151 Operand 2 is a vector of expressions, each of which must match the
152 corresponding element in the PARALLEL. */
153 DEF_RTL_EXPR(MATCH_PARALLEL, "match_parallel", "isE", 'm')
155 /* Appears only in machine descriptions.
156 Means match only something equal to what is stored in the operand table
157 at the index specified by the argument. For MATCH_OPERATOR. */
158 DEF_RTL_EXPR(MATCH_OP_DUP, "match_op_dup", "iE", 'm')
160 /* Appears only in machine descriptions.
161 Means match only something equal to what is stored in the operand table
162 at the index specified by the argument. For MATCH_PARALLEL. */
163 DEF_RTL_EXPR(MATCH_PAR_DUP, "match_par_dup", "iE", 'm')
165 /* Appears only in machine descriptions.
166 Operand 0 is the operand number, as in match_operand.
167 Operand 1 is the predicate to apply to the insn. */
168 DEF_RTL_EXPR(MATCH_INSN, "match_insn", "is", 'm')
170 /* Appears only in machine descriptions.
171 Defines the pattern for one kind of instruction.
173 0: names this instruction.
174 If the name is the null string, the instruction is in the
175 machine description just to be recognized, and will never be emitted by
176 the tree to rtl expander.
178 2: is a string which is a C expression
179 giving an additional condition for recognizing this pattern.
180 A null string means no extra condition.
181 3: is the action to execute if this pattern is matched.
182 If this assembler code template starts with a * then it is a fragment of
183 C code to run to decide on a template to use. Otherwise, it is the
185 4: optionally, a vector of attributes for this insn.
187 DEF_RTL_EXPR(DEFINE_INSN, "define_insn", "sEsTV", 'x')
189 /* Definition of a peephole optimization.
190 1st operand: vector of insn patterns to match
191 2nd operand: C expression that must be true
192 3rd operand: template or C code to produce assembler output.
193 4: optionally, a vector of attributes for this insn.
195 DEF_RTL_EXPR(DEFINE_PEEPHOLE, "define_peephole", "EsTV", 'x')
197 /* Definition of a split operation.
198 1st operand: insn pattern to match
199 2nd operand: C expression that must be true
200 3rd operand: vector of insn patterns to place into a SEQUENCE
201 4th operand: optionally, some C code to execute before generating the
202 insns. This might, for example, create some RTX's and store them in
203 elements of `recog_operand' for use by the vector of insn-patterns.
204 (`operands' is an alias here for `recog_operand'). */
205 DEF_RTL_EXPR(DEFINE_SPLIT, "define_split", "EsES", 'x')
207 /* Definition of an insn and associated split.
208 This is the concatenation, with a few modifications, of a define_insn
209 and a define_split which share the same pattern.
211 0: names this instruction.
212 If the name is the null string, the instruction is in the
213 machine description just to be recognized, and will never be emitted by
214 the tree to rtl expander.
216 2: is a string which is a C expression
217 giving an additional condition for recognizing this pattern.
218 A null string means no extra condition.
219 3: is the action to execute if this pattern is matched.
220 If this assembler code template starts with a * then it is a fragment of
221 C code to run to decide on a template to use. Otherwise, it is the
223 4: C expression that must be true for split. This may start with "&&"
224 in which case the split condition is the logical and of the insn
225 condition and what follows the "&&" of this operand.
226 5: vector of insn patterns to place into a SEQUENCE
227 6: optionally, some C code to execute before generating the
228 insns. This might, for example, create some RTX's and store them in
229 elements of `recog_operand' for use by the vector of insn-patterns.
230 (`operands' is an alias here for `recog_operand').
231 7: optionally, a vector of attributes for this insn. */
232 DEF_RTL_EXPR(DEFINE_INSN_AND_SPLIT, "define_insn_and_split", "sEsTsESV", 'x')
234 /* Definition of an RTL peephole operation.
235 Follows the same arguments as define_split. */
236 DEF_RTL_EXPR(DEFINE_PEEPHOLE2, "define_peephole2", "EsES", 'x')
238 /* Definition of a combiner pattern.
239 Operands not defined yet. */
240 DEF_RTL_EXPR(DEFINE_COMBINE, "define_combine", "Ess", 'x')
242 /* Define how to generate multiple insns for a standard insn name.
243 1st operand: the insn name.
244 2nd operand: vector of insn-patterns.
245 Use match_operand to substitute an element of `recog_operand'.
246 3rd operand: C expression that must be true for this to be available.
247 This may not test any operands.
248 4th operand: Extra C code to execute before generating the insns.
249 This might, for example, create some RTX's and store them in
250 elements of `recog_operand' for use by the vector of insn-patterns.
251 (`operands' is an alias here for `recog_operand'). */
252 DEF_RTL_EXPR(DEFINE_EXPAND, "define_expand", "sEss", 'x')
254 /* Define a requirement for delay slots.
255 1st operand: Condition involving insn attributes that, if true,
256 indicates that the insn requires the number of delay slots
258 2nd operand: Vector whose length is the three times the number of delay
260 Each entry gives three conditions, each involving attributes.
261 The first must be true for an insn to occupy that delay slot
262 location. The second is true for all insns that can be
263 annulled if the branch is true and the third is true for all
264 insns that can be annulled if the branch is false.
266 Multiple DEFINE_DELAYs may be present. They indicate differing
267 requirements for delay slots. */
268 DEF_RTL_EXPR(DEFINE_DELAY, "define_delay", "eE", 'x')
270 /* Define a set of insns that requires a function unit. This means that
271 these insns produce their result after a delay and that there may be
272 restrictions on the number of insns of this type that can be scheduled
275 More than one DEFINE_FUNCTION_UNIT can be specified for a function unit.
276 Each gives a set of operations and associated delays. The first three
277 operands must be the same for each operation for the same function unit.
279 All delays are specified in cycles.
281 1st operand: Name of function unit (mostly for documentation)
282 2nd operand: Number of identical function units in CPU
283 3rd operand: Total number of simultaneous insns that can execute on this
284 function unit; 0 if unlimited.
285 4th operand: Condition involving insn attribute, that, if true, specifies
286 those insns that this expression applies to.
287 5th operand: Constant delay after which insn result will be
289 6th operand: Delay until next insn can be scheduled on the function unit
290 executing this operation. The meaning depends on whether or
291 not the next operand is supplied.
292 7th operand: If this operand is not specified, the 6th operand gives the
293 number of cycles after the instruction matching the 4th
294 operand begins using the function unit until a subsequent
295 insn can begin. A value of zero should be used for a
296 unit with no issue constraints. If only one operation can
297 be executed a time and the unit is busy for the entire time,
298 the 3rd operand should be specified as 1, the 6th operand
299 should be specified as 0, and the 7th operand should not
302 If this operand is specified, it is a list of attribute
303 expressions. If an insn for which any of these expressions
304 is true is currently executing on the function unit, the
305 issue delay will be given by the 6th operand. Otherwise,
306 the insn can be immediately scheduled (subject to the limit
307 on the number of simultaneous operations executing on the
309 DEF_RTL_EXPR(DEFINE_FUNCTION_UNIT, "define_function_unit", "siieiiV", 'x')
311 /* Define attribute computation for `asm' instructions. */
312 DEF_RTL_EXPR(DEFINE_ASM_ATTRIBUTES, "define_asm_attributes", "V", 'x' )
314 /* Definition of a conditional execution meta operation. Automatically
315 generates new instances of DEFINE_INSN, selected by having attribute
316 "predicable" true. The new pattern will contain a COND_EXEC and the
317 predicate at top-level.
320 0: The predicate pattern. The top-level form should match a
321 relational operator. Operands should have only one alternative.
322 1: A C expression giving an additional condition for recognizing
323 the generated pattern.
324 2: A template or C code to produce assembler output. */
325 DEF_RTL_EXPR(DEFINE_COND_EXEC, "define_cond_exec", "Ess", 'x')
327 /* SEQUENCE appears in the result of a `gen_...' function
328 for a DEFINE_EXPAND that wants to make several insns.
329 Its elements are the bodies of the insns that should be made.
330 `emit_insn' takes the SEQUENCE apart and makes separate insns. */
331 DEF_RTL_EXPR(SEQUENCE, "sequence", "E", 'x')
333 /* Refers to the address of its argument. This is only used in alias.c. */
334 DEF_RTL_EXPR(ADDRESS, "address", "e", 'm')
336 /* ----------------------------------------------------------------------
337 Expressions used for insn attributes. These also do not appear in
338 actual rtl code in the compiler.
339 ---------------------------------------------------------------------- */
341 /* Definition of an insn attribute.
342 1st operand: name of the attribute
343 2nd operand: comma-separated list of possible attribute values
344 3rd operand: expression for the default value of the attribute. */
345 DEF_RTL_EXPR(DEFINE_ATTR, "define_attr", "sse", 'x')
347 /* Marker for the name of an attribute. */
348 DEF_RTL_EXPR(ATTR, "attr", "s", 'x')
350 /* For use in the last (optional) operand of DEFINE_INSN or DEFINE_PEEPHOLE and
351 in DEFINE_ASM_INSN to specify an attribute to assign to insns matching that
354 (set_attr "name" "value") is equivalent to
355 (set (attr "name") (const_string "value")) */
356 DEF_RTL_EXPR(SET_ATTR, "set_attr", "ss", 'x')
358 /* In the last operand of DEFINE_INSN and DEFINE_PEEPHOLE, this can be used to
359 specify that attribute values are to be assigned according to the
362 The following three expressions are equivalent:
364 (set (attr "att") (cond [(eq_attrq "alternative" "1") (const_string "a1")
365 (eq_attrq "alternative" "2") (const_string "a2")]
366 (const_string "a3")))
367 (set_attr_alternative "att" [(const_string "a1") (const_string "a2")
368 (const_string "a3")])
369 (set_attr "att" "a1,a2,a3")
371 DEF_RTL_EXPR(SET_ATTR_ALTERNATIVE, "set_attr_alternative", "sE", 'x')
373 /* A conditional expression true if the value of the specified attribute of
374 the current insn equals the specified value. The first operand is the
375 attribute name and the second is the comparison value. */
376 DEF_RTL_EXPR(EQ_ATTR, "eq_attr", "ss", 'x')
378 /* A conditional expression which is true if the specified flag is
379 true for the insn being scheduled in reorg.
381 genattr.c defines the following flags which can be tested by
382 (attr_flag "foo") expressions in eligible_for_delay.
384 forward, backward, very_likely, likely, very_unlikely, and unlikely. */
386 DEF_RTL_EXPR (ATTR_FLAG, "attr_flag", "s", 'x')
388 /* ----------------------------------------------------------------------
389 Expression types used for things in the instruction chain.
391 All formats must start with "iuu" to handle the chain.
392 Each insn expression holds an rtl instruction and its semantics
393 during back-end processing.
394 See macros's in "rtl.h" for the meaning of each rtx->fld[].
396 ---------------------------------------------------------------------- */
398 /* An instruction that cannot jump. */
399 DEF_RTL_EXPR(INSN, "insn", "iuueiee", 'i')
401 /* An instruction that can possibly jump.
402 Fields ( rtx->fld[] ) have exact same meaning as INSN's. */
403 DEF_RTL_EXPR(JUMP_INSN, "jump_insn", "iuueiee0", 'i')
405 /* An instruction that can possibly call a subroutine
406 but which will not change which instruction comes next
407 in the current function.
408 Field ( rtx->fld[7] ) is CALL_INSN_FUNCTION_USAGE.
409 All other fields ( rtx->fld[] ) have exact same meaning as INSN's. */
410 DEF_RTL_EXPR(CALL_INSN, "call_insn", "iuueieee", 'i')
412 /* A marker that indicates that control will not flow through. */
413 DEF_RTL_EXPR(BARRIER, "barrier", "iuu", 'x')
415 /* Holds a label that is followed by instructions.
417 3: is used in jump.c for the use-count of the label.
418 4: is used in flow.c to point to the chain of label_ref's to this label.
419 5: is a number that is unique in the entire compilation.
420 6: is the user-given name of the label, if any.
421 7: is the alternate label name. */
422 DEF_RTL_EXPR(CODE_LABEL, "code_label", "iuu00iss", 'x')
424 /* Say where in the code a source line starts, for symbol table's sake.
426 3: filename, if line number > 0, note-specific data otherwise.
427 4: line number if > 0, enum note_insn otherwise.
428 5: unique number if line number == note_insn_deleted_label. */
429 DEF_RTL_EXPR(NOTE, "note", "iuu0ni", 'x')
431 /* ----------------------------------------------------------------------
432 Top level constituents of INSN, JUMP_INSN and CALL_INSN.
433 ---------------------------------------------------------------------- */
435 /* Conditionally execute code.
436 Operand 0 is the condition that if true, the code is executed.
437 Operand 1 is the code to be executed (typically a SET).
439 Semantics are that there are no side effects if the condition
440 is false. This pattern is created automatically by the if_convert
441 pass run after reload or by target-specific splitters. */
442 DEF_RTL_EXPR(COND_EXEC, "cond_exec", "ee", 'x')
444 /* Several operations to be done in parallel (perhaps under COND_EXEC). */
445 DEF_RTL_EXPR(PARALLEL, "parallel", "E", 'x')
447 /* A string that is passed through to the assembler as input.
448 One can obviously pass comments through by using the
449 assembler comment syntax.
450 These occur in an insn all by themselves as the PATTERN.
451 They also appear inside an ASM_OPERANDS
452 as a convenient way to hold a string. */
453 DEF_RTL_EXPR(ASM_INPUT, "asm_input", "s", 'x')
455 /* An assembler instruction with operands.
456 1st operand is the instruction template.
457 2nd operand is the constraint for the output.
458 3rd operand is the number of the output this expression refers to.
459 When an insn stores more than one value, a separate ASM_OPERANDS
460 is made for each output; this integer distinguishes them.
461 4th is a vector of values of input operands.
462 5th is a vector of modes and constraints for the input operands.
463 Each element is an ASM_INPUT containing a constraint string
464 and whose mode indicates the mode of the input operand.
465 6th is the name of the containing source file.
466 7th is the source line number. */
467 DEF_RTL_EXPR(ASM_OPERANDS, "asm_operands", "ssiEEsi", 'x')
469 /* A machine-specific operation.
470 1st operand is a vector of operands being used by the operation so that
471 any needed reloads can be done.
472 2nd operand is a unique value saying which of a number of machine-specific
473 operations is to be performed.
474 (Note that the vector must be the first operand because of the way that
475 genrecog.c record positions within an insn.)
476 This can occur all by itself in a PATTERN, as a component of a PARALLEL,
477 or inside an expression. */
478 DEF_RTL_EXPR(UNSPEC, "unspec", "Ei", 'x')
480 /* Similar, but a volatile operation and one which may trap. */
481 DEF_RTL_EXPR(UNSPEC_VOLATILE, "unspec_volatile", "Ei", 'x')
483 /* Vector of addresses, stored as full words. */
484 /* Each element is a LABEL_REF to a CODE_LABEL whose address we want. */
485 DEF_RTL_EXPR(ADDR_VEC, "addr_vec", "E", 'x')
487 /* Vector of address differences X0 - BASE, X1 - BASE, ...
488 First operand is BASE; the vector contains the X's.
489 The machine mode of this rtx says how much space to leave
490 for each difference and is adjusted by branch shortening if
491 CASE_VECTOR_SHORTEN_MODE is defined.
492 The third and fourth operands store the target labels with the
493 minimum and maximum addresses respectively.
494 The fifth operand stores flags for use by branch shortening.
495 Set at the start of shorten_branches:
496 min_align: the minimum alignment for any of the target labels.
497 base_after_vec: true iff BASE is after the ADDR_DIFF_VEC.
498 min_after_vec: true iff minimum addr target label is after the ADDR_DIFF_VEC.
499 max_after_vec: true iff maximum addr target label is after the ADDR_DIFF_VEC.
500 min_after_base: true iff minimum address target label is after BASE.
501 max_after_base: true iff maximum address target label is after BASE.
502 Set by the actual branch shortening process:
503 offset_unsigned: true iff offsets have to be treated as unsigned.
504 scale: scaling that is necessary to make offsets fit into the mode.
506 The third, fourth and fifth operands are only valid when
507 CASE_VECTOR_SHORTEN_MODE is defined, and only in an optimizing
510 DEF_RTL_EXPR(ADDR_DIFF_VEC, "addr_diff_vec", "eEee0", 'x')
512 /* ----------------------------------------------------------------------
513 At the top level of an instruction (perhaps under PARALLEL).
514 ---------------------------------------------------------------------- */
517 Operand 1 is the location (REG, MEM, PC, CC0 or whatever) assigned to.
518 Operand 2 is the value stored there.
519 ALL assignment must use SET.
520 Instructions that do multiple assignments must use multiple SET,
522 DEF_RTL_EXPR(SET, "set", "ee", 'x')
524 /* Indicate something is used in a way that we don't want to explain.
525 For example, subroutine calls will use the register
526 in which the static chain is passed. */
527 DEF_RTL_EXPR(USE, "use", "e", 'x')
529 /* Indicate something is clobbered in a way that we don't want to explain.
530 For example, subroutine calls will clobber some physical registers
531 (the ones that are by convention not saved). */
532 DEF_RTL_EXPR(CLOBBER, "clobber", "e", 'x')
534 /* Call a subroutine.
535 Operand 1 is the address to call.
536 Operand 2 is the number of arguments. */
538 DEF_RTL_EXPR(CALL, "call", "ee", 'x')
540 /* Return from a subroutine. */
542 DEF_RTL_EXPR(RETURN, "return", "", 'x')
545 Operand 1 is the condition.
546 Operand 2 is the trap code.
547 For an unconditional trap, make the condition (const_int 1). */
548 DEF_RTL_EXPR(TRAP_IF, "trap_if", "ee", 'x')
550 /* Placeholder for _Unwind_Resume before we know if a function call
551 or a branch is needed. Operand 1 is the exception region from
552 which control is flowing. */
553 DEF_RTL_EXPR(RESX, "resx", "i", 'x')
555 /* ----------------------------------------------------------------------
556 Primitive values for use in expressions.
557 ---------------------------------------------------------------------- */
559 /* numeric integer constant */
560 DEF_RTL_EXPR(CONST_INT, "const_int", "w", 'o')
562 /* numeric floating point constant.
563 Operand 0 ('e') is the MEM that stores this constant in memory, or
564 various other things (see comments at immed_double_const in
566 Operand 1 ('0') is a chain of all CONST_DOUBLEs in use in the
568 Remaining operands hold the actual value. They are all 'w' and
569 there may be from 1 to 4; see rtl.c. */
570 DEF_RTL_EXPR(CONST_DOUBLE, "const_double", CONST_DOUBLE_FORMAT, 'o')
572 /* String constant. Used only for attributes right now. */
573 DEF_RTL_EXPR(CONST_STRING, "const_string", "s", 'o')
575 /* This is used to encapsulate an expression whose value is constant
576 (such as the sum of a SYMBOL_REF and a CONST_INT) so that it will be
577 recognized as a constant operand rather than by arithmetic instructions. */
579 DEF_RTL_EXPR(CONST, "const", "e", 'o')
581 /* program counter. Ordinary jumps are represented
582 by a SET whose first operand is (PC). */
583 DEF_RTL_EXPR(PC, "pc", "", 'o')
585 /* Used in the cselib routines to describe a value. */
586 DEF_RTL_EXPR(VALUE, "value", "0", 'o')
588 /* A register. The "operand" is the register number, accessed with
589 the REGNO macro. If this number is less than FIRST_PSEUDO_REGISTER
590 than a hardware register is being referred to. The second operand
591 holds the original register number - this will be different for a
592 pseudo register that got turned into a hard register.
593 This rtx needs to have as many (or more) fields as a MEM, since we
594 can change REG rtx's into MEMs during reload. */
595 DEF_RTL_EXPR(REG, "reg", "i0", 'o')
597 /* A scratch register. This represents a register used only within a
598 single insn. It will be turned into a REG during register allocation
599 or reload unless the constraint indicates that the register won't be
600 needed, in which case it can remain a SCRATCH. This code is
601 marked as having one operand so it can be turned into a REG. */
602 DEF_RTL_EXPR(SCRATCH, "scratch", "0", 'o')
604 /* One word of a multi-word value.
605 The first operand is the complete value; the second says which word.
606 The WORDS_BIG_ENDIAN flag controls whether word number 0
607 (as numbered in a SUBREG) is the most or least significant word.
609 This is also used to refer to a value in a different machine mode.
610 For example, it can be used to refer to a SImode value as if it were
611 Qimode, or vice versa. Then the word number is always 0. */
612 DEF_RTL_EXPR(SUBREG, "subreg", "ei", 'x')
614 /* This one-argument rtx is used for move instructions
615 that are guaranteed to alter only the low part of a destination.
616 Thus, (SET (SUBREG:HI (REG...)) (MEM:HI ...))
617 has an unspecified effect on the high part of REG,
618 but (SET (STRICT_LOW_PART (SUBREG:HI (REG...))) (MEM:HI ...))
619 is guaranteed to alter only the bits of REG that are in HImode.
621 The actual instruction used is probably the same in both cases,
622 but the register constraints may be tighter when STRICT_LOW_PART
625 DEF_RTL_EXPR(STRICT_LOW_PART, "strict_low_part", "e", 'x')
627 /* (CONCAT a b) represents the virtual concatenation of a and b
628 to make a value that has as many bits as a and b put together.
629 This is used for complex values. Normally it appears only
630 in DECL_RTLs and during RTL generation, but not in the insn chain. */
631 DEF_RTL_EXPR(CONCAT, "concat", "ee", 'o')
633 /* A memory location; operand is the address. The second operand is the
634 alias set to which this MEM belongs. We use `0' instead of `w' for this
635 field so that the field need not be specified in machine descriptions. */
636 DEF_RTL_EXPR(MEM, "mem", "e0", 'o')
638 /* Reference to an assembler label in the code for this function.
639 The operand is a CODE_LABEL found in the insn chain.
640 The unprinted fields 1 and 2 are used in flow.c for the
641 LABEL_NEXTREF and CONTAINING_INSN. */
642 DEF_RTL_EXPR(LABEL_REF, "label_ref", "u00", 'o')
644 /* Reference to a named label: the string that is the first operand,
645 with `_' added implicitly in front.
646 Exception: if the first character explicitly given is `*',
647 to give it to the assembler, remove the `*' and do not add `_'. */
648 DEF_RTL_EXPR(SYMBOL_REF, "symbol_ref", "s", 'o')
650 /* The condition code register is represented, in our imagination,
651 as a register holding a value that can be compared to zero.
652 In fact, the machine has already compared them and recorded the
653 results; but instructions that look at the condition code
654 pretend to be looking at the entire value and comparing it. */
655 DEF_RTL_EXPR(CC0, "cc0", "", 'o')
657 /* Reference to the address of a register. Removed by purge_addressof after
658 CSE has elided as many as possible.
659 1st operand: the register we may need the address of.
660 2nd operand: the original pseudo regno we were generated for.
661 3rd operand: the decl for the object in the register, for
664 DEF_RTL_EXPR(ADDRESSOF, "addressof", "eit", 'o')
666 /* =====================================================================
667 A QUEUED expression really points to a member of the queue of instructions
668 to be output later for postincrement/postdecrement.
669 QUEUED expressions never become part of instructions.
670 When a QUEUED expression would be put into an instruction,
671 instead either the incremented variable or a copy of its previous
675 0. the variable to be incremented (a REG rtx).
676 1. the incrementing instruction, or 0 if it hasn't been output yet.
677 2. A REG rtx for a copy of the old value of the variable, or 0 if none yet.
678 3. the body to use for the incrementing instruction
679 4. the next QUEUED expression in the queue.
680 ====================================================================== */
682 DEF_RTL_EXPR(QUEUED, "queued", "eeeee", 'x')
684 /* ----------------------------------------------------------------------
685 Expressions for operators in an rtl pattern
686 ---------------------------------------------------------------------- */
688 /* if_then_else. This is used in representing ordinary
689 conditional jump instructions.
694 DEF_RTL_EXPR(IF_THEN_ELSE, "if_then_else", "eee", '3')
696 /* General conditional. The first operand is a vector composed of pairs of
697 expressions. The first element of each pair is evaluated, in turn.
698 The value of the conditional is the second expression of the first pair
699 whose first expression evaluates non-zero. If none of the expressions is
700 true, the second operand will be used as the value of the conditional.
702 This should be replaced with use of IF_THEN_ELSE. */
703 DEF_RTL_EXPR(COND, "cond", "Ee", 'x')
705 /* Comparison, produces a condition code result. */
706 DEF_RTL_EXPR(COMPARE, "compare", "ee", '2')
709 DEF_RTL_EXPR(PLUS, "plus", "ee", 'c')
711 /* Operand 0 minus operand 1. */
712 DEF_RTL_EXPR(MINUS, "minus", "ee", '2')
714 /* Minus operand 0. */
715 DEF_RTL_EXPR(NEG, "neg", "e", '1')
717 DEF_RTL_EXPR(MULT, "mult", "ee", 'c')
719 /* Operand 0 divided by operand 1. */
720 DEF_RTL_EXPR(DIV, "div", "ee", '2')
721 /* Remainder of operand 0 divided by operand 1. */
722 DEF_RTL_EXPR(MOD, "mod", "ee", '2')
724 /* Unsigned divide and remainder. */
725 DEF_RTL_EXPR(UDIV, "udiv", "ee", '2')
726 DEF_RTL_EXPR(UMOD, "umod", "ee", '2')
728 /* Bitwise operations. */
729 DEF_RTL_EXPR(AND, "and", "ee", 'c')
731 DEF_RTL_EXPR(IOR, "ior", "ee", 'c')
733 DEF_RTL_EXPR(XOR, "xor", "ee", 'c')
735 DEF_RTL_EXPR(NOT, "not", "e", '1')
738 0: value to be shifted.
739 1: number of bits. */
740 DEF_RTL_EXPR(ASHIFT, "ashift", "ee", '2') /* shift left */
741 DEF_RTL_EXPR(ROTATE, "rotate", "ee", '2') /* rotate left */
742 DEF_RTL_EXPR(ASHIFTRT, "ashiftrt", "ee", '2') /* arithmetic shift right */
743 DEF_RTL_EXPR(LSHIFTRT, "lshiftrt", "ee", '2') /* logical shift right */
744 DEF_RTL_EXPR(ROTATERT, "rotatert", "ee", '2') /* rotate right */
746 /* Minimum and maximum values of two operands. We need both signed and
747 unsigned forms. (We cannot use MIN for SMIN because it conflicts
748 with a macro of the same name.) */
750 DEF_RTL_EXPR(SMIN, "smin", "ee", 'c')
751 DEF_RTL_EXPR(SMAX, "smax", "ee", 'c')
752 DEF_RTL_EXPR(UMIN, "umin", "ee", 'c')
753 DEF_RTL_EXPR(UMAX, "umax", "ee", 'c')
755 /* These unary operations are used to represent incrementation
756 and decrementation as they occur in memory addresses.
757 The amount of increment or decrement are not represented
758 because they can be understood from the machine-mode of the
759 containing MEM. These operations exist in only two cases:
760 1. pushes onto the stack.
761 2. created automatically by the life_analysis pass in flow.c. */
762 DEF_RTL_EXPR(PRE_DEC, "pre_dec", "e", 'a')
763 DEF_RTL_EXPR(PRE_INC, "pre_inc", "e", 'a')
764 DEF_RTL_EXPR(POST_DEC, "post_dec", "e", 'a')
765 DEF_RTL_EXPR(POST_INC, "post_inc", "e", 'a')
767 /* These binary operations are used to represent generic address
768 side-effects in memory addresses, except for simple incrementation
769 or decrementation which use the above operations. They are
770 created automatically by the life_analysis pass in flow.c.
771 The first operand is a REG which is used as the address.
772 The second operand is an expression that is assigned to the
773 register, either before (PRE_MODIFY) or after (POST_MODIFY)
774 evaluating the address.
775 Currently, the compiler can only handle second operands of the
776 form (plus (reg) (reg)) and (plus (reg) (const_int)), where
777 the first operand of the PLUS has to be the same register as
778 the first operand of the *_MODIFY. */
779 DEF_RTL_EXPR(PRE_MODIFY, "pre_modify", "ee", 'a')
780 DEF_RTL_EXPR(POST_MODIFY, "post_modify", "ee", 'a')
782 /* Comparison operations. The ordered comparisons exist in two
783 flavors, signed and unsigned. */
784 DEF_RTL_EXPR(NE, "ne", "ee", '<')
785 DEF_RTL_EXPR(EQ, "eq", "ee", '<')
786 DEF_RTL_EXPR(GE, "ge", "ee", '<')
787 DEF_RTL_EXPR(GT, "gt", "ee", '<')
788 DEF_RTL_EXPR(LE, "le", "ee", '<')
789 DEF_RTL_EXPR(LT, "lt", "ee", '<')
790 DEF_RTL_EXPR(GEU, "geu", "ee", '<')
791 DEF_RTL_EXPR(GTU, "gtu", "ee", '<')
792 DEF_RTL_EXPR(LEU, "leu", "ee", '<')
793 DEF_RTL_EXPR(LTU, "ltu", "ee", '<')
795 /* Additional floating point unordered comparision flavors. */
796 DEF_RTL_EXPR(UNORDERED, "unordered", "ee", '<')
797 DEF_RTL_EXPR(ORDERED, "ordered", "ee", '<')
799 /* These are equivalent to unordered or ... */
800 DEF_RTL_EXPR(UNEQ, "uneq", "ee", '<')
801 DEF_RTL_EXPR(UNGE, "unge", "ee", '<')
802 DEF_RTL_EXPR(UNGT, "ungt", "ee", '<')
803 DEF_RTL_EXPR(UNLE, "unle", "ee", '<')
804 DEF_RTL_EXPR(UNLT, "unlt", "ee", '<')
806 /* This is an ordered NE, ie !UNEQ, ie false for NaN. */
807 DEF_RTL_EXPR(LTGT, "ltgt", "ee", '<')
809 /* Represents the result of sign-extending the sole operand.
810 The machine modes of the operand and of the SIGN_EXTEND expression
811 determine how much sign-extension is going on. */
812 DEF_RTL_EXPR(SIGN_EXTEND, "sign_extend", "e", '1')
814 /* Similar for zero-extension (such as unsigned short to int). */
815 DEF_RTL_EXPR(ZERO_EXTEND, "zero_extend", "e", '1')
817 /* Similar but here the operand has a wider mode. */
818 DEF_RTL_EXPR(TRUNCATE, "truncate", "e", '1')
820 /* Similar for extending floating-point values (such as SFmode to DFmode). */
821 DEF_RTL_EXPR(FLOAT_EXTEND, "float_extend", "e", '1')
822 DEF_RTL_EXPR(FLOAT_TRUNCATE, "float_truncate", "e", '1')
824 /* Conversion of fixed point operand to floating point value. */
825 DEF_RTL_EXPR(FLOAT, "float", "e", '1')
827 /* With fixed-point machine mode:
828 Conversion of floating point operand to fixed point value.
829 Value is defined only when the operand's value is an integer.
830 With floating-point machine mode (and operand with same mode):
831 Operand is rounded toward zero to produce an integer value
832 represented in floating point. */
833 DEF_RTL_EXPR(FIX, "fix", "e", '1')
835 /* Conversion of unsigned fixed point operand to floating point value. */
836 DEF_RTL_EXPR(UNSIGNED_FLOAT, "unsigned_float", "e", '1')
838 /* With fixed-point machine mode:
839 Conversion of floating point operand to *unsigned* fixed point value.
840 Value is defined only when the operand's value is an integer. */
841 DEF_RTL_EXPR(UNSIGNED_FIX, "unsigned_fix", "e", '1')
844 DEF_RTL_EXPR(ABS, "abs", "e", '1')
847 DEF_RTL_EXPR(SQRT, "sqrt", "e", '1')
849 /* Find first bit that is set.
850 Value is 1 + number of trailing zeros in the arg.,
852 DEF_RTL_EXPR(FFS, "ffs", "e", '1')
854 /* Reference to a signed bit-field of specified size and position.
855 Operand 0 is the memory unit (usually SImode or QImode) which
856 contains the field's first bit. Operand 1 is the width, in bits.
857 Operand 2 is the number of bits in the memory unit before the
858 first bit of this field.
859 If BITS_BIG_ENDIAN is defined, the first bit is the msb and
860 operand 2 counts from the msb of the memory unit.
861 Otherwise, the first bit is the lsb and operand 2 counts from
862 the lsb of the memory unit. */
863 DEF_RTL_EXPR(SIGN_EXTRACT, "sign_extract", "eee", 'b')
865 /* Similar for unsigned bit-field. */
866 DEF_RTL_EXPR(ZERO_EXTRACT, "zero_extract", "eee", 'b')
868 /* For RISC machines. These save memory when splitting insns. */
870 /* HIGH are the high-order bits of a constant expression. */
871 DEF_RTL_EXPR(HIGH, "high", "e", 'o')
873 /* LO_SUM is the sum of a register and the low-order bits
874 of a constant expression. */
875 DEF_RTL_EXPR(LO_SUM, "lo_sum", "ee", 'o')
877 /* Header for range information. Operand 0 is the NOTE_INSN_RANGE_BEG insn.
878 Operand 1 is the NOTE_INSN_RANGE_END insn. Operand 2 is a vector of all of
879 the registers that can be substituted within this range. Operand 3 is the
880 number of calls in the range. Operand 4 is the number of insns in the
881 range. Operand 5 is the unique range number for this range. Operand 6 is
882 the basic block # of the start of the live range. Operand 7 is the basic
883 block # of the end of the live range. Operand 8 is the loop depth. Operand
884 9 is a bitmap of the registers live at the start of the range. Operand 10
885 is a bitmap of the registers live at the end of the range. Operand 11 is
886 marker number for the start of the range. Operand 12 is the marker number
887 for the end of the range. */
888 DEF_RTL_EXPR(RANGE_INFO, "range_info", "uuEiiiiiibbii", 'x')
890 /* Registers that can be substituted within the range. Operand 0 is the
891 original pseudo register number. Operand 1 will be filled in with the
892 pseudo register the value is copied for the duration of the range. Operand
893 2 is the number of references within the range to the register. Operand 3
894 is the number of sets or clobbers of the register in the range. Operand 4
895 is the number of deaths the register has. Operand 5 is the copy flags that
896 give the status of whether a copy is needed from the original register to
897 the new register at the beginning of the range, or whether a copy from the
898 new register back to the original at the end of the range. Operand 6 is the
899 live length. Operand 7 is the number of calls that this register is live
900 across. Operand 8 is the symbol node of the variable if the register is a
901 user variable. Operand 9 is the block node that the variable is declared
902 in if the register is a user variable. */
903 DEF_RTL_EXPR(RANGE_REG, "range_reg", "iiiiiiiitt", 'x')
905 /* Information about a local variable's ranges. Operand 0 is an EXPR_LIST of
906 the different ranges a variable is in where it is copied to a different
907 pseudo register. Operand 1 is the block that the variable is declared in.
908 Operand 2 is the number of distinct ranges. */
909 DEF_RTL_EXPR(RANGE_VAR, "range_var", "eti", 'x')
911 /* Information about the registers that are live at the current point. Operand
912 0 is the live bitmap. Operand 1 is the original block number. */
913 DEF_RTL_EXPR(RANGE_LIVE, "range_live", "bi", 'x')
915 /* A unary `__builtin_constant_p' expression. These are only emitted
916 during RTL generation, and then only if optimize > 0. They are
917 eliminated by the first CSE pass. */
918 DEF_RTL_EXPR(CONSTANT_P_RTX, "constant_p_rtx", "e", 'x')
920 /* A placeholder for a CALL_INSN which may be turned into a normal call,
921 a sibling (tail) call or tail recursion.
923 Immediately after RTL generation, this placeholder will be replaced
924 by the insns to perform the call, sibcall or tail recursion.
926 This RTX has 4 operands. The first three are lists of instructions to
927 perform the call as a normal call, sibling call and tail recursion
928 respectively. The latter two lists may be NULL, the first may never
931 The last operand is the tail recursion CODE_LABEL, which may be NULL if no
932 potential tail recursive calls were found.
934 The tail recursion label is needed so that we can clear LABEL_PRESERVE_P
935 after we select a call method.
937 This method of tail-call elimination is intended to be replaced by
938 tree-based optimizations once front-end conversions are complete. */
939 DEF_RTL_EXPR(CALL_PLACEHOLDER, "call_placeholder", "uuuu", 'x')
941 /* Describes a merge operation between two vector values.
942 Operands 0 and 1 are the vectors to be merged, operand 2 is a bitmask
943 that specifies where the parts of the result are taken from. Set bits
944 indicate operand 0, clear bits indicate operand 1. The parts are defined
945 by the mode of the vectors. */
946 DEF_RTL_EXPR(VEC_MERGE, "vec_merge", "eee", 'x')
948 /* Describes an operation that selects parts of a vector.
949 Operands 0 is the source vector, operand 1 is a PARALLEL that contains
950 a CONST_INT for each of the subparts of the result vector, giving the
951 number of the source subpart that should be stored into it. */
952 DEF_RTL_EXPR(VEC_SELECT, "vec_select", "ee", 'x')
954 /* Describes a vector concat operation. Operands 0 and 1 are the source
955 vectors, the result is a vector that is as long as operands 0 and 1
956 combined and is the concatenation of the two source vectors. */
957 DEF_RTL_EXPR(VEC_CONCAT, "vec_concat", "ee", 'x')
959 /* Describes a vector constant. Each part of the PARALLEL that is operand 0
960 describes a constant for one of the subparts. */
961 DEF_RTL_EXPR(VEC_CONST, "vec_const", "e", 'x')
963 /* Describes an operation that converts a small vector into a larger one by
964 duplicating the input values. The output vector mode must have the same
965 submodes as the input vector mode, and the number of output parts must be
966 an integer multiple of the number of input parts. */
967 DEF_RTL_EXPR(VEC_DUPLICATE, "vec_duplicate", "e", 'x')
969 /* Addition with signed saturation */
970 DEF_RTL_EXPR(SS_PLUS, "ss_plus", "ee", 'c')
972 /* Addition with unsigned saturation */
973 DEF_RTL_EXPR(US_PLUS, "us_plus", "ee", 'c')
975 /* Operand 0 minus operand 1, with signed saturation. */
976 DEF_RTL_EXPR(SS_MINUS, "ss_minus", "ee", '2')
978 /* Operand 0 minus operand 1, with unsigned saturation. */
979 DEF_RTL_EXPR(US_MINUS, "us_minus", "ee", '2')
981 /* Signed saturating truncate. */
982 DEF_RTL_EXPR(SS_TRUNCATE, "ss_truncate", "e", '1')
984 /* Unsigned saturating truncate. */
985 DEF_RTL_EXPR(US_TRUNCATE, "us_truncate", "e", '1')
987 /* The SSA phi operator.
989 The argument is a vector of 2N rtxes. Element 2N+1 is a CONST_INT
990 containing the block number of the predecessor through which control
991 has passed when the register at element 2N is used.
993 Note that PHI may only appear at the beginning of a basic block.
995 ??? There may be multiple PHI insns, but they are all evaluated
996 in parallel. This probably ought to be changed to use a real
997 PARALLEL, as that would be less confusing and more in the spirit
998 of canonical RTL. It is, however, easier to manipulate this way. */
999 DEF_RTL_EXPR(PHI, "phi", "E", 'x')
OSDN Git Service
