1 /* Definitions of target machine for GNU compiler for Hitachi Super-H.
2 Copyright (C) 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
3 Free Software Foundation, Inc.
4 Contributed by Steve Chamberlain (sac@cygnus.com).
5 Improved by Jim Wilson (wilson@cygnus.com).
7 This file is part of GNU CC.
9 GNU CC is free software; you can redistribute it and/or modify
10 it under the terms of the GNU General Public License as published by
11 the Free Software Foundation; either version 2, or (at your option)
14 GNU CC is distributed in the hope that it will be useful,
15 but WITHOUT ANY WARRANTY; without even the implied warranty of
16 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 GNU General Public License for more details.
19 You should have received a copy of the GNU General Public License
20 along with GNU CC; see the file COPYING. If not, write to
21 the Free Software Foundation, 59 Temple Place - Suite 330,
22 Boston, MA 02111-1307, USA. */
27 #define TARGET_VERSION \
28 fputs (" (Hitachi SH)", stderr);
30 /* Unfortunately, insn-attrtab.c doesn't include insn-codes.h. We can't
31 include it here, because hconfig.h is also included by gencodes.c . */
32 /* ??? No longer true. */
33 extern int code_for_indirect_jump_scratch;
35 /* Generate SDB debugging information. */
37 #define SDB_DEBUGGING_INFO
39 /* Output DBX (stabs) debugging information if doing -gstabs. */
45 #define CPP_SPEC "%{ml:-D__LITTLE_ENDIAN__} \
50 %{m4-single-only:-D__SH4_SINGLE_ONLY__} \
51 %{m4-single:-D__SH4_SINGLE__} \
52 %{m4-nofpu:-D__sh3__ -D__SH4_NOFPU__} \
54 %{!m1:%{!m2:%{!m3:%{!m3e:%{!m4:%{!m4-single:%{!m4-single-only:%{!m4-nofpu:-D__sh1__}}}}}}}} \
55 %{mnomacsave:-D__NOMACSAVE__} \
56 %{mhitachi:-D__HITACHI__}"
58 #define CPP_PREDEFINES "-D__sh__ -Acpu=sh -Amachine=sh"
60 #define ASM_SPEC "%{ml:-little} %{mrelax:-relax}"
62 #define LINK_SPEC "%{ml:-m shl} %{mrelax:-relax}"
64 /* We can not debug without a frame pointer. */
65 /* #define CAN_DEBUG_WITHOUT_FP */
67 #define CONDITIONAL_REGISTER_USAGE do \
70 if (! TARGET_SH4 || ! TARGET_FMOVD) \
72 for (regno = FIRST_XD_REG; regno <= LAST_XD_REG; regno++) \
73 fixed_regs[regno] = call_used_regs[regno] = 1; \
78 for (regno = FIRST_FP_REG; regno <= LAST_FP_REG; regno++) \
79 fixed_regs[regno] = call_used_regs[regno] = 1; \
80 fixed_regs[FPUL_REG] = call_used_regs[FPUL_REG] = 1; \
85 fixed_regs[PIC_OFFSET_TABLE_REGNUM] = 1; \
86 /* Hitachi saves and restores mac registers on call. */ \
87 if (TARGET_HITACHI && ! TARGET_NOMACSAVE) \
89 call_used_regs[MACH_REG] = 0; \
90 call_used_regs[MACL_REG] = 0; \
92 for (regno = FIRST_GENERAL_REG; regno <= LAST_GENERAL_REG; regno++) \
93 if (! fixed_regs[regno] && call_used_regs[regno]) \
94 SET_HARD_REG_BIT (reg_class_contents[SIBCALL_REGS], regno); \
97 /* ??? Need to write documentation for all SH options and add it to the
100 /* Run-time compilation parameters selecting different hardware subsets. */
102 extern int target_flags;
103 #define ISIZE_BIT (1<<1)
104 #define DALIGN_BIT (1<<6)
105 #define SH1_BIT (1<<8)
106 #define SH2_BIT (1<<9)
107 #define SH3_BIT (1<<10)
108 #define SH3E_BIT (1<<11)
109 #define HARD_SH4_BIT (1<<5)
110 #define FPU_SINGLE_BIT (1<<7)
111 #define SH4_BIT (1<<12)
112 #define FMOVD_BIT (1<<4)
113 #define SPACE_BIT (1<<13)
114 #define BIGTABLE_BIT (1<<14)
115 #define RELAX_BIT (1<<15)
116 #define USERMODE_BIT (1<<16)
117 #define HITACHI_BIT (1<<22)
118 #define NOMACSAVE_BIT (1<<23)
119 #define PREFERGOT_BIT (1<<24)
120 #define PADSTRUCT_BIT (1<<28)
121 #define LITTLE_ENDIAN_BIT (1<<29)
122 #define IEEE_BIT (1<<30)
124 /* Nonzero if we should dump out instruction size info. */
125 #define TARGET_DUMPISIZE (target_flags & ISIZE_BIT)
127 /* Nonzero to align doubles on 64 bit boundaries. */
128 #define TARGET_ALIGN_DOUBLE (target_flags & DALIGN_BIT)
130 /* Nonzero if we should generate code using type 1 insns. */
131 #define TARGET_SH1 (target_flags & SH1_BIT)
133 /* Nonzero if we should generate code using type 2 insns. */
134 #define TARGET_SH2 (target_flags & SH2_BIT)
136 /* Nonzero if we should generate code using type 3 insns. */
137 #define TARGET_SH3 (target_flags & SH3_BIT)
139 /* Nonzero if we should generate code using type 3E insns. */
140 #define TARGET_SH3E (target_flags & SH3E_BIT)
142 /* Nonzero if the cache line size is 32. */
143 #define TARGET_CACHE32 (target_flags & HARD_SH4_BIT)
145 /* Nonzero if we schedule for a superscalar implementation. */
146 #define TARGET_SUPERSCALAR (target_flags & HARD_SH4_BIT)
148 /* Nonzero if the target has separate instruction and data caches. */
149 #define TARGET_HARVARD (target_flags & HARD_SH4_BIT)
151 /* Nonzero if compiling for SH4 hardware (to be used for insn costs etc.) */
152 #define TARGET_HARD_SH4 (target_flags & HARD_SH4_BIT)
154 /* Nonzero if the default precision of th FPU is single */
155 #define TARGET_FPU_SINGLE (target_flags & FPU_SINGLE_BIT)
157 /* Nonzero if we should generate code using type 4 insns. */
158 #define TARGET_SH4 (target_flags & SH4_BIT)
160 /* Nonzero if we should generate fmovd. */
161 #define TARGET_FMOVD (target_flags & FMOVD_BIT)
163 /* Nonzero if we respect NANs. */
164 #define TARGET_IEEE (target_flags & IEEE_BIT)
166 /* Nonzero if we should generate smaller code rather than faster code. */
167 #define TARGET_SMALLCODE (target_flags & SPACE_BIT)
169 /* Nonzero to use long jump tables. */
170 #define TARGET_BIGTABLE (target_flags & BIGTABLE_BIT)
172 /* Nonzero to generate pseudo-ops needed by the assembler and linker
173 to do function call relaxing. */
174 #define TARGET_RELAX (target_flags & RELAX_BIT)
176 /* Nonzero if using Hitachi's calling convention. */
177 #define TARGET_HITACHI (target_flags & HITACHI_BIT)
179 /* Nonzero if not saving macl/mach when using -mhitachi */
180 #define TARGET_NOMACSAVE (target_flags & NOMACSAVE_BIT)
182 /* Nonzero if padding structures to a multiple of 4 bytes. This is
183 incompatible with Hitachi's compiler, and gives unusual structure layouts
184 which confuse programmers.
185 ??? This option is not useful, but is retained in case there are people
186 who are still relying on it. It may be deleted in the future. */
187 #define TARGET_PADSTRUCT (target_flags & PADSTRUCT_BIT)
189 /* Nonzero if generating code for a little endian SH. */
190 #define TARGET_LITTLE_ENDIAN (target_flags & LITTLE_ENDIAN_BIT)
192 /* Nonzero if we should do everything in userland. */
193 #define TARGET_USERMODE (target_flags & USERMODE_BIT)
195 /* Nonzero if we should prefer @GOT calls when generating PIC. */
196 #define TARGET_PREFERGOT (target_flags & PREFERGOT_BIT)
198 /* Reset all target-selection flags. */
199 #define TARGET_NONE -(SH1_BIT | SH2_BIT | SH3_BIT | SH3E_BIT | SH4_BIT \
200 | HARD_SH4_BIT | FPU_SINGLE_BIT)
202 #define TARGET_SWITCHES \
203 { {"1", TARGET_NONE, "" }, \
204 {"1", SH1_BIT, "" }, \
205 {"2", TARGET_NONE, "" }, \
206 {"2", SH2_BIT|SH1_BIT, "" }, \
207 {"3", TARGET_NONE, "" }, \
208 {"3", SH3_BIT|SH2_BIT|SH1_BIT, "" }, \
209 {"3e", TARGET_NONE, "" }, \
210 {"3e", SH3E_BIT|SH3_BIT|SH2_BIT|SH1_BIT|FPU_SINGLE_BIT, "" }, \
211 {"4-single-only", TARGET_NONE, "" }, \
212 {"4-single-only", SH3E_BIT|SH3_BIT|SH2_BIT|SH1_BIT|HARD_SH4_BIT|FPU_SINGLE_BIT, "" }, \
213 {"4-single", TARGET_NONE, "" }, \
214 {"4-single", SH4_BIT|SH3E_BIT|SH3_BIT|SH2_BIT|SH1_BIT|HARD_SH4_BIT|FPU_SINGLE_BIT, "" },\
215 {"4-nofpu", TARGET_NONE, "" }, \
216 {"4-nofpu", SH3_BIT|SH2_BIT|SH1_BIT|HARD_SH4_BIT, "" },\
217 {"4", TARGET_NONE, "" }, \
218 {"4", SH4_BIT|SH3E_BIT|SH3_BIT|SH2_BIT|SH1_BIT|HARD_SH4_BIT, "" }, \
219 {"b", -LITTLE_ENDIAN_BIT, "" }, \
220 {"bigtable", BIGTABLE_BIT, "" }, \
221 {"dalign", DALIGN_BIT, "" }, \
222 {"fmovd", FMOVD_BIT, "" }, \
223 {"hitachi", HITACHI_BIT, "" }, \
224 {"nomacsave", NOMACSAVE_BIT, "" }, \
225 {"ieee", IEEE_BIT, "" }, \
226 {"isize", ISIZE_BIT, "" }, \
227 {"l", LITTLE_ENDIAN_BIT, "" }, \
228 {"no-ieee", -IEEE_BIT, "" }, \
229 {"padstruct", PADSTRUCT_BIT, "" }, \
230 {"prefergot", PREFERGOT_BIT, "" }, \
231 {"relax", RELAX_BIT, "" }, \
232 {"space", SPACE_BIT, "" }, \
233 {"usermode", USERMODE_BIT, "" }, \
235 {"", TARGET_DEFAULT, "" } \
238 /* This are meant to be redefined in the host dependent files */
239 #define SUBTARGET_SWITCHES
241 #define TARGET_DEFAULT (SH1_BIT)
243 #define OPTIMIZATION_OPTIONS(LEVEL,SIZE) \
246 flag_omit_frame_pointer = -1; \
248 target_flags |= SPACE_BIT; \
251 #define ASSEMBLER_DIALECT assembler_dialect
253 extern int assembler_dialect;
255 #define OVERRIDE_OPTIONS \
258 assembler_dialect = 0; \
267 assembler_dialect = 1; \
270 if (! TARGET_SH4 || ! TARGET_FMOVD) \
272 /* Prevent usage of explicit register names for variables \
273 for registers not present / not addressable in the \
274 target architecture. */ \
276 for (regno = (TARGET_SH3E) ? 17 : 0; \
277 regno <= 24; regno++) \
278 fp_reg_names[regno][0] = 0; \
280 if (flag_omit_frame_pointer < 0) \
281 /* The debugging information is sufficient, \
282 but gdb doesn't implement this yet */ \
284 flag_omit_frame_pointer \
285 = (PREFERRED_DEBUGGING_TYPE == DWARF_DEBUG \
286 || PREFERRED_DEBUGGING_TYPE == DWARF2_DEBUG); \
288 flag_omit_frame_pointer = 0; \
290 if (flag_pic && ! TARGET_PREFERGOT) \
291 flag_no_function_cse = 1; \
293 /* Never run scheduling before reload, since that can \
294 break global alloc, and generates slower code anyway due \
295 to the pressure on R0. */ \
296 flag_schedule_insns = 0; \
299 /* Target machine storage layout. */
301 /* Define to use software floating point emulator for REAL_ARITHMETIC and
302 decimal <-> binary conversion. */
303 #define REAL_ARITHMETIC
305 /* Define this if most significant bit is lowest numbered
306 in instructions that operate on numbered bit-fields. */
308 #define BITS_BIG_ENDIAN 0
310 /* Define this if most significant byte of a word is the lowest numbered. */
311 #define BYTES_BIG_ENDIAN (TARGET_LITTLE_ENDIAN == 0)
313 /* Define this if most significant word of a multiword number is the lowest
315 #define WORDS_BIG_ENDIAN (TARGET_LITTLE_ENDIAN == 0)
317 /* Define this to set the endianness to use in libgcc2.c, which can
318 not depend on target_flags. */
319 #if defined(__LITTLE_ENDIAN__)
320 #define LIBGCC2_WORDS_BIG_ENDIAN 0
322 #define LIBGCC2_WORDS_BIG_ENDIAN 1
325 /* Number of bits in an addressable storage unit. */
326 #define BITS_PER_UNIT 8
328 /* Width in bits of a "word", which is the contents of a machine register.
329 Note that this is not necessarily the width of data type `int';
330 if using 16-bit ints on a 68000, this would still be 32.
331 But on a machine with 16-bit registers, this would be 16. */
332 #define BITS_PER_WORD 32
333 #define MAX_BITS_PER_WORD 32
335 /* Width of a word, in units (bytes). */
336 #define UNITS_PER_WORD 4
338 /* Width in bits of a pointer.
339 See also the macro `Pmode' defined below. */
340 #define POINTER_SIZE 32
342 /* Allocation boundary (in *bits*) for storing arguments in argument list. */
343 #define PARM_BOUNDARY 32
345 /* Boundary (in *bits*) on which stack pointer should be aligned. */
346 #define STACK_BOUNDARY BIGGEST_ALIGNMENT
348 /* The log (base 2) of the cache line size, in bytes. Processors prior to
349 SH2 have no actual cache, but they fetch code in chunks of 4 bytes.
350 The SH2/3 have 16 byte cache lines, and the SH4 has a 32 byte cache line */
351 #define CACHE_LOG (TARGET_CACHE32 ? 5 : TARGET_SH2 ? 4 : 2)
353 /* Allocation boundary (in *bits*) for the code of a function.
354 32 bit alignment is faster, because instructions are always fetched as a
355 pair from a longword boundary. */
356 #define FUNCTION_BOUNDARY (TARGET_SMALLCODE ? 16 : (1 << CACHE_LOG) * 8)
358 /* Alignment of field after `int : 0' in a structure. */
359 #define EMPTY_FIELD_BOUNDARY 32
361 /* No data type wants to be aligned rounder than this. */
362 #define BIGGEST_ALIGNMENT (TARGET_ALIGN_DOUBLE ? 64 : 32)
364 /* The best alignment to use in cases where we have a choice. */
365 #define FASTEST_ALIGNMENT 32
367 /* Make strings word-aligned so strcpy from constants will be faster. */
368 #define CONSTANT_ALIGNMENT(EXP, ALIGN) \
369 ((TREE_CODE (EXP) == STRING_CST \
370 && (ALIGN) < FASTEST_ALIGNMENT) \
371 ? FASTEST_ALIGNMENT : (ALIGN))
373 #ifndef MAX_OFILE_ALIGNMENT
374 #define MAX_OFILE_ALIGNMENT 128
377 /* Make arrays of chars word-aligned for the same reasons. */
378 #define DATA_ALIGNMENT(TYPE, ALIGN) \
379 (TREE_CODE (TYPE) == ARRAY_TYPE \
380 && TYPE_MODE (TREE_TYPE (TYPE)) == QImode \
381 && (ALIGN) < FASTEST_ALIGNMENT ? FASTEST_ALIGNMENT : (ALIGN))
383 /* Number of bits which any structure or union's size must be a
384 multiple of. Each structure or union's size is rounded up to a
386 #define STRUCTURE_SIZE_BOUNDARY (TARGET_PADSTRUCT ? 32 : 8)
388 /* Set this nonzero if move instructions will actually fail to work
389 when given unaligned data. */
390 #define STRICT_ALIGNMENT 1
392 /* If LABEL_AFTER_BARRIER demands an alignment, return its base 2 logarithm. */
393 #define LABEL_ALIGN_AFTER_BARRIER(LABEL_AFTER_BARRIER) \
394 barrier_align (LABEL_AFTER_BARRIER)
396 #define LOOP_ALIGN(A_LABEL) \
397 ((! optimize || TARGET_HARVARD || TARGET_SMALLCODE) \
398 ? 0 : sh_loop_align (A_LABEL))
400 #define LABEL_ALIGN(A_LABEL) \
402 (PREV_INSN (A_LABEL) \
403 && GET_CODE (PREV_INSN (A_LABEL)) == INSN \
404 && GET_CODE (PATTERN (PREV_INSN (A_LABEL))) == UNSPEC_VOLATILE \
405 && XINT (PATTERN (PREV_INSN (A_LABEL)), 1) == UNSPECV_ALIGN) \
406 /* explicit alignment insn in constant tables. */ \
407 ? INTVAL (XVECEXP (PATTERN (PREV_INSN (A_LABEL)), 0, 0)) \
410 /* Jump tables must be 32 bit aligned, no matter the size of the element. */
411 #define ADDR_VEC_ALIGN(ADDR_VEC) 2
413 /* The base two logarithm of the known minimum alignment of an insn length. */
414 #define INSN_LENGTH_ALIGNMENT(A_INSN) \
415 (GET_CODE (A_INSN) == INSN \
417 : GET_CODE (A_INSN) == JUMP_INSN || GET_CODE (A_INSN) == CALL_INSN \
421 /* Standard register usage. */
423 /* Register allocation for the Hitachi calling convention:
429 r14 frame pointer/call saved
431 ap arg pointer (doesn't really exist, always eliminated)
432 pr subroutine return address
434 mach multiply/accumulate result, high part
435 macl multiply/accumulate result, low part.
436 fpul fp/int communication register
437 rap return address pointer register
439 fr1..fr3 scratch floating point registers
441 fr12..fr15 call saved floating point registers */
443 /* Number of actual hardware registers.
444 The hardware registers are assigned numbers for the compiler
445 from 0 to just below FIRST_PSEUDO_REGISTER.
446 All registers that the compiler knows about must be given numbers,
447 even those that are not normally considered general registers. */
449 /* There are many other relevant definitions in sh.md's md_constants. */
451 #define FIRST_GENERAL_REG R0_REG
452 #define LAST_GENERAL_REG (FIRST_GENERAL_REG + 15)
453 #define FIRST_FP_REG DR0_REG
454 #define LAST_FP_REG (FIRST_FP_REG + 15)
455 #define FIRST_XD_REG XD0_REG
456 #define LAST_XD_REG (FIRST_XD_REG + 7)
458 #define GENERAL_REGISTER_P(REGNO) \
459 ((REGNO) >= FIRST_GENERAL_REG && (REGNO) <= LAST_GENERAL_REG)
461 #define GENERAL_OR_AP_REGISTER_P(REGNO) \
462 (GENERAL_REGISTER_P (REGNO) || ((REGNO) == AP_REG))
464 #define FP_REGISTER_P(REGNO) \
465 ((REGNO) >= FIRST_FP_REG && (REGNO) <= LAST_FP_REG)
467 #define XD_REGISTER_P(REGNO) \
468 ((REGNO) >= FIRST_XD_REG && (REGNO) <= LAST_XD_REG)
470 #define FP_OR_XD_REGISTER_P(REGNO) \
471 (FP_REGISTER_P (REGNO) || XD_REGISTER_P (REGNO))
473 #define FP_ANY_REGISTER_P(REGNO) \
474 (FP_REGISTER_P (REGNO) || XD_REGISTER_P (REGNO) || (REGNO) == FPUL_REG)
476 #define SPECIAL_REGISTER_P(REGNO) \
477 ((REGNO) == GBR_REG || (REGNO) == T_REG \
478 || (REGNO) == MACH_REG || (REGNO) == MACL_REG)
480 #define FIRST_PSEUDO_REGISTER 49
482 /* 1 for registers that have pervasive standard uses
483 and are not available for the register allocator.
485 Mach register is fixed 'cause it's only 10 bits wide for SH1.
486 It is 32 bits wide for SH2. */
488 #define FIXED_REGISTERS \
504 /* 1 for registers not available across function calls.
505 These must include the FIXED_REGISTERS and also any
506 registers that can be used without being saved.
507 The latter must include the registers where values are returned
508 and the register where structure-value addresses are passed.
509 Aside from that, you can include as many other registers as you like. */
511 #define CALL_USED_REGISTERS \
527 /* Return number of consecutive hard regs needed starting at reg REGNO
528 to hold something of mode MODE.
529 This is ordinarily the length in words of a value of mode MODE
530 but can be less for certain modes in special long registers.
532 On the SH all but the XD regs are UNITS_PER_WORD bits wide. */
534 #define HARD_REGNO_NREGS(REGNO, MODE) \
535 (XD_REGISTER_P (REGNO) \
536 ? (GET_MODE_SIZE (MODE) / (2 * UNITS_PER_WORD)) \
537 : ((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD)) \
539 /* Value is 1 if hard register REGNO can hold a value of machine-mode MODE.
540 We can allow any mode in any general register. The special registers
541 only allow SImode. Don't allow any mode in the PR. */
543 /* We cannot hold DCmode values in the XD registers because alter_reg
544 handles subregs of them incorrectly. We could work around this by
545 spacing the XD registers like the DR registers, but this would require
546 additional memory in every compilation to hold larger register vectors.
547 We could hold SFmode / SCmode values in XD registers, but that
548 would require a tertiary reload when reloading from / to memory,
549 and a secondary reload to reload from / to general regs; that
550 seems to be a loosing proposition. */
551 #define HARD_REGNO_MODE_OK(REGNO, MODE) \
552 (SPECIAL_REGISTER_P (REGNO) ? (MODE) == SImode \
553 : (REGNO) == FPUL_REG ? (MODE) == SImode || (MODE) == SFmode \
554 : FP_REGISTER_P (REGNO) && (MODE) == SFmode \
556 : FP_REGISTER_P (REGNO) \
557 ? ((MODE) == SFmode \
558 || (TARGET_SH3E && (MODE) == SCmode) \
559 || (((TARGET_SH4 && (MODE) == DFmode) || (MODE) == DCmode) \
560 && (((REGNO) - FIRST_FP_REG) & 1) == 0)) \
561 : XD_REGISTER_P (REGNO) \
563 : (REGNO) == PR_REG ? 0 \
564 : (REGNO) == FPSCR_REG ? (MODE) == PSImode \
567 /* Value is 1 if it is a good idea to tie two pseudo registers
568 when one has mode MODE1 and one has mode MODE2.
569 If HARD_REGNO_MODE_OK could produce different values for MODE1 and MODE2,
570 for any hard reg, then this must be 0 for correct output.
571 That's the case for xd registers: we don't hold SFmode values in
572 them, so we can't tie an SFmode pseudos with one in another
573 floating-point mode. */
575 #define MODES_TIEABLE_P(MODE1, MODE2) \
576 ((MODE1) == (MODE2) \
577 || (GET_MODE_CLASS (MODE1) == GET_MODE_CLASS (MODE2) \
578 && (MODE1) != SFmode && (MODE2) != SFmode))
580 /* Specify the registers used for certain standard purposes.
581 The values of these macros are register numbers. */
583 /* Define this if the program counter is overloaded on a register. */
584 /* #define PC_REGNUM 15*/
586 /* Register to use for pushing function arguments. */
587 #define STACK_POINTER_REGNUM SP_REG
589 /* Base register for access to local variables of the function. */
590 #define FRAME_POINTER_REGNUM FP_REG
592 /* Fake register that holds the address on the stack of the
593 current function's return address. */
594 #define RETURN_ADDRESS_POINTER_REGNUM RAP_REG
596 /* Register to hold the addressing base for position independent
597 code access to data items. */
598 #define PIC_OFFSET_TABLE_REGNUM PIC_REG
600 #define GOT_SYMBOL_NAME "*_GLOBAL_OFFSET_TABLE_"
602 /* Value should be nonzero if functions must have frame pointers.
603 Zero means the frame pointer need not be set up (and parms may be accessed
604 via the stack pointer) in functions that seem suitable. */
606 #define FRAME_POINTER_REQUIRED 0
608 /* Definitions for register eliminations.
610 We have three registers that can be eliminated on the SH. First, the
611 frame pointer register can often be eliminated in favor of the stack
612 pointer register. Secondly, the argument pointer register can always be
613 eliminated; it is replaced with either the stack or frame pointer.
614 Third, there is the return address pointer, which can also be replaced
615 with either the stack or the frame pointer. */
617 /* This is an array of structures. Each structure initializes one pair
618 of eliminable registers. The "from" register number is given first,
619 followed by "to". Eliminations of the same "from" register are listed
620 in order of preference. */
622 /* If you add any registers here that are not actually hard registers,
623 and that have any alternative of elimination that doesn't always
624 apply, you need to amend calc_live_regs to exclude it, because
625 reload spills all eliminable registers where it sees an
626 can_eliminate == 0 entry, thus making them 'live' .
627 If you add any hard registers that can be eliminated in different
628 ways, you have to patch reload to spill them only when all alternatives
629 of elimination fail. */
631 #define ELIMINABLE_REGS \
632 {{ FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM}, \
633 { RETURN_ADDRESS_POINTER_REGNUM, STACK_POINTER_REGNUM}, \
634 { RETURN_ADDRESS_POINTER_REGNUM, FRAME_POINTER_REGNUM}, \
635 { ARG_POINTER_REGNUM, STACK_POINTER_REGNUM}, \
636 { ARG_POINTER_REGNUM, FRAME_POINTER_REGNUM},}
638 /* Given FROM and TO register numbers, say whether this elimination
640 #define CAN_ELIMINATE(FROM, TO) \
641 (!((FROM) == FRAME_POINTER_REGNUM && FRAME_POINTER_REQUIRED))
643 /* Define the offset between two registers, one to be eliminated, and the other
644 its replacement, at the start of a routine. */
646 #define INITIAL_ELIMINATION_OFFSET(FROM, TO, OFFSET) \
647 OFFSET = initial_elimination_offset ((FROM), (TO))
649 /* Base register for access to arguments of the function. */
650 #define ARG_POINTER_REGNUM AP_REG
652 /* Register in which the static-chain is passed to a function. */
653 #define STATIC_CHAIN_REGNUM 3
655 /* The register in which a struct value address is passed. */
657 #define STRUCT_VALUE_REGNUM 2
659 /* If the structure value address is not passed in a register, define
660 `STRUCT_VALUE' as an expression returning an RTX for the place
661 where the address is passed. If it returns 0, the address is
662 passed as an "invisible" first argument. */
664 /* The Hitachi calling convention doesn't quite fit into this scheme since
665 the address is passed like an invisible argument, but one that is always
667 #define STRUCT_VALUE \
668 (TARGET_HITACHI ? 0 : gen_rtx_REG (Pmode, STRUCT_VALUE_REGNUM))
670 #define RETURN_IN_MEMORY(TYPE) \
671 (TYPE_MODE (TYPE) == BLKmode \
672 || TARGET_HITACHI && TREE_CODE (TYPE) == RECORD_TYPE)
674 /* Don't default to pcc-struct-return, because we have already specified
675 exactly how to return structures in the RETURN_IN_MEMORY macro. */
677 #define DEFAULT_PCC_STRUCT_RETURN 0
679 /* Define the classes of registers for register constraints in the
680 machine description. Also define ranges of constants.
682 One of the classes must always be named ALL_REGS and include all hard regs.
683 If there is more than one class, another class must be named NO_REGS
684 and contain no registers.
686 The name GENERAL_REGS must be the name of a class (or an alias for
687 another name such as ALL_REGS). This is the class of registers
688 that is allowed by "g" or "r" in a register constraint.
689 Also, registers outside this class are allocated only when
690 instructions express preferences for them.
692 The classes must be numbered in nondecreasing order; that is,
693 a larger-numbered class must never be contained completely
694 in a smaller-numbered class.
696 For any two classes, it is very desirable that there be another
697 class that represents their union. */
699 /* The SH has two sorts of general registers, R0 and the rest. R0 can
700 be used as the destination of some of the arithmetic ops. There are
701 also some special purpose registers; the T bit register, the
702 Procedure Return Register and the Multiply Accumulate Registers. */
703 /* Place GENERAL_REGS after FPUL_REGS so that it will be preferred by
704 reg_class_subunion. We don't want to have an actual union class
705 of these, because it would only be used when both classes are calculated
706 to give the same cost, but there is only one FPUL register.
707 Besides, regclass fails to notice the different REGISTER_MOVE_COSTS
708 applying to the actual instruction alternative considered. E.g., the
709 y/r alternative of movsi_ie is considered to have no more cost that
710 the r/r alternative, which is patently untrue. */
731 #define N_REG_CLASSES (int) LIM_REG_CLASSES
733 /* Give names of register classes as strings for dump file. */
734 #define REG_CLASS_NAMES \
752 /* Define which registers fit in which classes.
753 This is an initializer for a vector of HARD_REG_SET
754 of length N_REG_CLASSES. */
756 #define REG_CLASS_CONTENTS \
758 { 0x00000000, 0x00000000 }, /* NO_REGS */ \
759 { 0x00000001, 0x00000000 }, /* R0_REGS */ \
760 { 0x00020000, 0x00000000 }, /* PR_REGS */ \
761 { 0x00040000, 0x00000000 }, /* T_REGS */ \
762 { 0x00300000, 0x00000000 }, /* MAC_REGS */ \
763 { 0x00400000, 0x00000000 }, /* FPUL_REGS */ \
764 /* SIBCALL_REGS is initialized in CONDITIONAL_REGISTER_USAGE. */ \
765 { 0x00000000, 0x00000000 }, /* SIBCALL_REGS */ \
766 { 0x0081FFFF, 0x00000000 }, /* GENERAL_REGS */ \
767 { 0x01000000, 0x00000000 }, /* FP0_REGS */ \
768 { 0xFF000000, 0x000000FF }, /* FP_REGS */ \
769 { 0xFF000000, 0x0000FFFF }, /* DF_REGS */ \
770 { 0x00000000, 0x00010000 }, /* FPSCR_REGS */ \
771 { 0xFF81FFFF, 0x0000FFFF }, /* GENERAL_FP_REGS */ \
772 { 0xFFFFFFFF, 0x0001FFFF }, /* ALL_REGS */ \
775 /* The same information, inverted:
776 Return the class number of the smallest class containing
777 reg number REGNO. This could be a conditional expression
778 or could index an array. */
780 extern int regno_reg_class[];
781 #define REGNO_REG_CLASS(REGNO) regno_reg_class[(REGNO)]
783 /* When defined, the compiler allows registers explicitly used in the
784 rtl to be used as spill registers but prevents the compiler from
785 extending the lifetime of these registers. */
787 #define SMALL_REGISTER_CLASSES 1
789 /* The order in which register should be allocated. */
790 /* Sometimes FP0_REGS becomes the preferred class of a floating point pseudo,
791 and GENERAL_FP_REGS the alternate class. Since FP0 is likely to be
792 spilled or used otherwise, we better have the FP_REGS allocated first. */
793 #define REG_ALLOC_ORDER \
794 { 25,26,27,28,29,30,31,24,32,33,34,35,36,37,38,39, \
795 40,41,42,43,44,45,46,47,48, \
796 1,2,3,7,6,5,4,0,8,9,10,11,12,13,14, \
797 22,15,16,17,18,19,20,21,23 }
799 /* The class value for index registers, and the one for base regs. */
800 #define INDEX_REG_CLASS R0_REGS
801 #define BASE_REG_CLASS GENERAL_REGS
803 /* Get reg_class from a letter such as appears in the machine
805 extern enum reg_class reg_class_from_letter[];
807 #define REG_CLASS_FROM_LETTER(C) \
808 ( (C) >= 'a' && (C) <= 'z' ? reg_class_from_letter[(C)-'a'] : NO_REGS )
810 /* The letters I, J, K, L and M in a register constraint string
811 can be used to stand for particular ranges of immediate operands.
812 This macro defines what the ranges are.
813 C is the letter, and VALUE is a constant value.
814 Return 1 if VALUE is in the range specified by C.
815 I: arithmetic operand -127..128, as used in add, sub, etc
816 K: shift operand 1,2,8 or 16
817 L: logical operand 0..255, as used in and, or, etc.
821 #define CONST_OK_FOR_I(VALUE) (((HOST_WIDE_INT)(VALUE))>= -128 \
822 && ((HOST_WIDE_INT)(VALUE)) <= 127)
823 #define CONST_OK_FOR_K(VALUE) ((VALUE)==1||(VALUE)==2||(VALUE)==8||(VALUE)==16)
824 #define CONST_OK_FOR_L(VALUE) (((HOST_WIDE_INT)(VALUE))>= 0 \
825 && ((HOST_WIDE_INT)(VALUE)) <= 255)
826 #define CONST_OK_FOR_M(VALUE) ((VALUE)==1)
827 #define CONST_OK_FOR_N(VALUE) ((VALUE)==0)
828 #define CONST_OK_FOR_LETTER_P(VALUE, C) \
829 ((C) == 'I' ? CONST_OK_FOR_I (VALUE) \
830 : (C) == 'K' ? CONST_OK_FOR_K (VALUE) \
831 : (C) == 'L' ? CONST_OK_FOR_L (VALUE) \
832 : (C) == 'M' ? CONST_OK_FOR_M (VALUE) \
833 : (C) == 'N' ? CONST_OK_FOR_N (VALUE) \
836 /* Similar, but for floating constants, and defining letters G and H.
837 Here VALUE is the CONST_DOUBLE rtx itself. */
839 #define CONST_DOUBLE_OK_FOR_LETTER_P(VALUE, C) \
840 ((C) == 'G' ? (fp_zero_operand (VALUE) && fldi_ok ()) \
841 : (C) == 'H' ? (fp_one_operand (VALUE) && fldi_ok ()) \
844 /* Given an rtx X being reloaded into a reg required to be
845 in class CLASS, return the class of reg to actually use.
846 In general this is just CLASS; but on some machines
847 in some cases it is preferable to use a more restrictive class. */
849 #define PREFERRED_RELOAD_CLASS(X, CLASS) (CLASS)
851 #define SECONDARY_OUTPUT_RELOAD_CLASS(CLASS,MODE,X) \
852 ((((((CLASS) == FP_REGS || (CLASS) == FP0_REGS \
853 || (CLASS) == DF_REGS) \
854 && (GET_CODE (X) == REG && GENERAL_OR_AP_REGISTER_P (REGNO (X)))) \
855 || (((CLASS) == GENERAL_REGS || (CLASS) == R0_REGS) \
856 && GET_CODE (X) == REG \
857 && FP_REGISTER_P (REGNO (X)))) \
860 : ((CLASS) == FPUL_REGS \
861 && (GET_CODE (X) == MEM \
862 || (GET_CODE (X) == REG \
863 && (REGNO (X) >= FIRST_PSEUDO_REGISTER \
864 || REGNO (X) == T_REG \
865 || system_reg_operand (X, VOIDmode))))) \
867 : (((CLASS) == MAC_REGS || (CLASS) == PR_REGS) \
868 && GET_CODE (X) == REG && ! GENERAL_REGISTER_P (REGNO (X)) \
869 && (CLASS) != REGNO_REG_CLASS (REGNO (X))) \
870 ? GENERAL_REGS : NO_REGS)
872 #define SECONDARY_INPUT_RELOAD_CLASS(CLASS,MODE,X) \
873 ((((CLASS) == FP_REGS || (CLASS) == FP0_REGS || (CLASS) == DF_REGS) \
874 && immediate_operand ((X), (MODE)) \
875 && ! ((fp_zero_operand (X) || fp_one_operand (X)) \
876 && (MODE) == SFmode && fldi_ok ())) \
878 : (CLASS == FPUL_REGS \
879 && ((GET_CODE (X) == REG \
880 && (REGNO (X) == MACL_REG || REGNO (X) == MACH_REG \
881 || REGNO (X) == T_REG)))) \
883 : CLASS == FPUL_REGS && immediate_operand ((X), (MODE)) \
884 ? (GET_CODE (X) == CONST_INT && CONST_OK_FOR_I (INTVAL (X)) \
887 : (CLASS == FPSCR_REGS \
888 && ((GET_CODE (X) == REG && REGNO (X) >= FIRST_PSEUDO_REGISTER) \
889 || (GET_CODE (X) == MEM && GET_CODE (XEXP ((X), 0)) == PLUS)))\
891 : SECONDARY_OUTPUT_RELOAD_CLASS((CLASS),(MODE),(X)))
893 /* Return the maximum number of consecutive registers
894 needed to represent mode MODE in a register of class CLASS.
896 On SH this is the size of MODE in words. */
897 #define CLASS_MAX_NREGS(CLASS, MODE) \
898 ((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD)
900 /* If defined, gives a class of registers that cannot be used as the
901 operand of a SUBREG that changes the mode of the object illegally. */
903 #define CLASS_CANNOT_CHANGE_MODE DF_REGS
905 /* Defines illegal mode changes for CLASS_CANNOT_CHANGE_MODE. */
907 #define CLASS_CANNOT_CHANGE_MODE_P(FROM,TO) \
908 (GET_MODE_SIZE (FROM) != GET_MODE_SIZE (TO))
910 /* Stack layout; function entry, exit and calling. */
912 /* Define the number of registers that can hold parameters.
913 These macros are used only in other macro definitions below. */
915 #define NPARM_REGS(MODE) \
916 (TARGET_SH3E && (MODE) == SFmode \
918 : TARGET_SH4 && (GET_MODE_CLASS (MODE) == MODE_FLOAT \
919 || GET_MODE_CLASS (MODE) == MODE_COMPLEX_FLOAT) \
923 #define FIRST_PARM_REG (FIRST_GENERAL_REG + 4)
924 #define FIRST_RET_REG FIRST_GENERAL_REG
926 #define FIRST_FP_PARM_REG (FIRST_FP_REG + 4)
927 #define FIRST_FP_RET_REG FIRST_FP_REG
929 /* Define this if pushing a word on the stack
930 makes the stack pointer a smaller address. */
931 #define STACK_GROWS_DOWNWARD
933 /* Define this macro if the addresses of local variable slots are at
934 negative offsets from the frame pointer.
936 The SH only has positive indexes, so grow the frame up. */
937 /* #define FRAME_GROWS_DOWNWARD */
939 /* Offset from the frame pointer to the first local variable slot to
941 #define STARTING_FRAME_OFFSET 0
943 /* If we generate an insn to push BYTES bytes,
944 this says how many the stack pointer really advances by. */
945 /* Don't define PUSH_ROUNDING, since the hardware doesn't do this.
946 When PUSH_ROUNDING is not defined, PARM_BOUNDARY will cause gcc to
947 do correct alignment. */
949 #define PUSH_ROUNDING(NPUSHED) (((NPUSHED) + 3) & ~3)
952 /* Offset of first parameter from the argument pointer register value. */
953 #define FIRST_PARM_OFFSET(FNDECL) 0
955 /* Value is the number of byte of arguments automatically
956 popped when returning from a subroutine call.
957 FUNDECL is the declaration node of the function (as a tree),
958 FUNTYPE is the data type of the function (as a tree),
959 or for a library call it is an identifier node for the subroutine name.
960 SIZE is the number of bytes of arguments passed on the stack.
962 On the SH, the caller does not pop any of its arguments that were passed
964 #define RETURN_POPS_ARGS(FUNDECL,FUNTYPE,SIZE) 0
966 /* Nonzero if we do not know how to pass TYPE solely in registers.
967 Values that come in registers with inconvenient padding are stored
968 to memory at the function start. */
970 #define MUST_PASS_IN_STACK(MODE,TYPE) \
972 && (TREE_CODE (TYPE_SIZE (TYPE)) != INTEGER_CST \
973 || TREE_ADDRESSABLE (TYPE)))
974 /* Some subroutine macros specific to this machine. */
976 #define BASE_RETURN_VALUE_REG(MODE) \
977 ((TARGET_SH3E && ((MODE) == SFmode)) \
979 : TARGET_SH3E && (MODE) == SCmode \
982 && ((MODE) == DFmode || (MODE) == SFmode \
983 || (MODE) == DCmode || (MODE) == SCmode )) \
987 #define BASE_ARG_REG(MODE) \
988 ((TARGET_SH3E && ((MODE) == SFmode)) \
989 ? FIRST_FP_PARM_REG \
990 : TARGET_SH4 && (GET_MODE_CLASS (MODE) == MODE_FLOAT \
991 || GET_MODE_CLASS (MODE) == MODE_COMPLEX_FLOAT)\
992 ? FIRST_FP_PARM_REG \
995 /* Define how to find the value returned by a function.
996 VALTYPE is the data type of the value (as a tree).
997 If the precise function being called is known, FUNC is its FUNCTION_DECL;
998 otherwise, FUNC is 0.
999 For the SH, this is like LIBCALL_VALUE, except that we must change the
1000 mode like PROMOTE_MODE does.
1001 ??? PROMOTE_MODE is ignored for non-scalar types. The set of types
1002 tested here has to be kept in sync with the one in explow.c:promote_mode. */
1004 #define FUNCTION_VALUE(VALTYPE, FUNC) \
1006 ((GET_MODE_CLASS (TYPE_MODE (VALTYPE)) == MODE_INT \
1007 && GET_MODE_SIZE (TYPE_MODE (VALTYPE)) < UNITS_PER_WORD \
1008 && (TREE_CODE (VALTYPE) == INTEGER_TYPE \
1009 || TREE_CODE (VALTYPE) == ENUMERAL_TYPE \
1010 || TREE_CODE (VALTYPE) == BOOLEAN_TYPE \
1011 || TREE_CODE (VALTYPE) == CHAR_TYPE \
1012 || TREE_CODE (VALTYPE) == REAL_TYPE \
1013 || TREE_CODE (VALTYPE) == OFFSET_TYPE)) \
1014 ? SImode : TYPE_MODE (VALTYPE)), \
1015 BASE_RETURN_VALUE_REG (TYPE_MODE (VALTYPE)))
1017 /* Define how to find the value returned by a library function
1018 assuming the value has mode MODE. */
1019 #define LIBCALL_VALUE(MODE) \
1020 gen_rtx_REG ((MODE), BASE_RETURN_VALUE_REG (MODE));
1022 /* 1 if N is a possible register number for a function value. */
1023 #define FUNCTION_VALUE_REGNO_P(REGNO) \
1024 ((REGNO) == FIRST_RET_REG || (TARGET_SH3E && (REGNO) == FIRST_FP_RET_REG))
1026 /* 1 if N is a possible register number for function argument passing. */
1027 #define FUNCTION_ARG_REGNO_P(REGNO) \
1028 (((REGNO) >= FIRST_PARM_REG && (REGNO) < (FIRST_PARM_REG + 4)) \
1030 && (REGNO) >= FIRST_FP_PARM_REG && (REGNO) < (FIRST_FP_PARM_REG + 8)))
1032 /* Define a data type for recording info about an argument list
1033 during the scan of that argument list. This data type should
1034 hold all necessary information about the function itself
1035 and about the args processed so far, enough to enable macros
1036 such as FUNCTION_ARG to determine where the next arg should go.
1038 On SH, this is a single integer, which is a number of words
1039 of arguments scanned so far (including the invisible argument,
1040 if any, which holds the structure-value-address).
1041 Thus NARGREGS or more means all following args should go on the stack. */
1043 enum sh_arg_class { SH_ARG_INT = 0, SH_ARG_FLOAT = 1 };
1049 #define CUMULATIVE_ARGS struct sh_args
1051 #define GET_SH_ARG_CLASS(MODE) \
1052 ((TARGET_SH3E && (MODE) == SFmode) \
1054 : TARGET_SH4 && (GET_MODE_CLASS (MODE) == MODE_FLOAT \
1055 || GET_MODE_CLASS (MODE) == MODE_COMPLEX_FLOAT) \
1056 ? SH_ARG_FLOAT : SH_ARG_INT)
1058 #define ROUND_ADVANCE(SIZE) \
1059 (((SIZE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD)
1061 /* Round a register number up to a proper boundary for an arg of mode
1064 The SH doesn't care about double alignment, so we only
1065 round doubles to even regs when asked to explicitly. */
1067 #define ROUND_REG(CUM, MODE) \
1068 (((TARGET_ALIGN_DOUBLE \
1069 || (TARGET_SH4 && ((MODE) == DFmode || (MODE) == DCmode) \
1070 && (CUM).arg_count[(int) SH_ARG_FLOAT] < NPARM_REGS (MODE)))\
1071 && GET_MODE_UNIT_SIZE ((MODE)) > UNITS_PER_WORD) \
1072 ? ((CUM).arg_count[(int) GET_SH_ARG_CLASS (MODE)] \
1073 + ((CUM).arg_count[(int) GET_SH_ARG_CLASS (MODE)] & 1)) \
1074 : (CUM).arg_count[(int) GET_SH_ARG_CLASS (MODE)])
1076 /* Initialize a variable CUM of type CUMULATIVE_ARGS
1077 for a call to a function whose data type is FNTYPE.
1078 For a library call, FNTYPE is 0.
1080 On SH, the offset always starts at 0: the first parm reg is always
1081 the same reg for a given argument class.
1083 For TARGET_HITACHI, the structure value pointer is passed in memory. */
1085 #define INIT_CUMULATIVE_ARGS(CUM, FNTYPE, LIBNAME, INDIRECT) \
1087 (CUM).arg_count[(int) SH_ARG_INT] = 0; \
1088 (CUM).arg_count[(int) SH_ARG_FLOAT] = 0; \
1090 = (TARGET_HITACHI && FNTYPE \
1091 && aggregate_value_p (TREE_TYPE (FNTYPE))); \
1094 /* Update the data in CUM to advance over an argument
1095 of mode MODE and data type TYPE.
1096 (TYPE is null for libcalls where that information may not be
1099 #define FUNCTION_ARG_ADVANCE(CUM, MODE, TYPE, NAMED) \
1100 if ((CUM).force_mem) \
1101 (CUM).force_mem = 0; \
1102 else if (! TARGET_SH4 || PASS_IN_REG_P ((CUM), (MODE), (TYPE))) \
1103 ((CUM).arg_count[(int) GET_SH_ARG_CLASS (MODE)] \
1104 = (ROUND_REG ((CUM), (MODE)) \
1105 + ((MODE) == BLKmode \
1106 ? ROUND_ADVANCE (int_size_in_bytes (TYPE)) \
1107 : ROUND_ADVANCE (GET_MODE_SIZE (MODE)))))
1109 /* Return boolean indicating arg of mode MODE will be passed in a reg.
1110 This macro is only used in this file. */
1112 #define PASS_IN_REG_P(CUM, MODE, TYPE) \
1114 || (! TREE_ADDRESSABLE ((tree)(TYPE)) \
1115 && (! TARGET_HITACHI || ! AGGREGATE_TYPE_P (TYPE)))) \
1116 && ! (CUM).force_mem \
1118 ? ((MODE) == BLKmode \
1119 ? (((CUM).arg_count[(int) SH_ARG_INT] * UNITS_PER_WORD \
1120 + int_size_in_bytes (TYPE)) \
1121 <= NPARM_REGS (SImode) * UNITS_PER_WORD) \
1122 : ((ROUND_REG((CUM), (MODE)) \
1123 + HARD_REGNO_NREGS (BASE_ARG_REG (MODE), (MODE))) \
1124 <= NPARM_REGS (MODE))) \
1125 : ROUND_REG ((CUM), (MODE)) < NPARM_REGS (MODE)))
1127 /* Define where to put the arguments to a function.
1128 Value is zero to push the argument on the stack,
1129 or a hard register in which to store the argument.
1131 MODE is the argument's machine mode.
1132 TYPE is the data type of the argument (as a tree).
1133 This is null for libcalls where that information may
1135 CUM is a variable of type CUMULATIVE_ARGS which gives info about
1136 the preceding args and about the function being called.
1137 NAMED is nonzero if this argument is a named parameter
1138 (otherwise it is an extra parameter matching an ellipsis).
1140 On SH the first args are normally in registers
1141 and the rest are pushed. Any arg that starts within the first
1142 NPARM_REGS words is at least partially passed in a register unless
1143 its data type forbids. */
1145 #define FUNCTION_ARG(CUM, MODE, TYPE, NAMED) \
1146 ((PASS_IN_REG_P ((CUM), (MODE), (TYPE)) \
1148 || (! TARGET_HITACHI && (TARGET_SH3E || ! current_function_varargs)))) \
1149 ? gen_rtx_REG ((MODE), \
1150 ((BASE_ARG_REG (MODE) + ROUND_REG ((CUM), (MODE))) \
1151 ^ ((MODE) == SFmode && TARGET_SH4 \
1152 && TARGET_LITTLE_ENDIAN != 0))) \
1155 #define PRETEND_OUTGOING_VARARGS_NAMED (! TARGET_HITACHI)
1157 /* For an arg passed partly in registers and partly in memory,
1158 this is the number of registers used.
1159 For args passed entirely in registers or entirely in memory, zero.
1161 We sometimes split args. */
1163 #define FUNCTION_ARG_PARTIAL_NREGS(CUM, MODE, TYPE, NAMED) \
1164 ((PASS_IN_REG_P ((CUM), (MODE), (TYPE)) \
1166 && (ROUND_REG ((CUM), (MODE)) \
1167 + ((MODE) != BLKmode \
1168 ? ROUND_ADVANCE (GET_MODE_SIZE (MODE)) \
1169 : ROUND_ADVANCE (int_size_in_bytes (TYPE))) \
1170 > NPARM_REGS (MODE))) \
1171 ? NPARM_REGS (MODE) - ROUND_REG ((CUM), (MODE)) \
1174 extern int current_function_anonymous_args;
1176 /* Perform any needed actions needed for a function that is receiving a
1177 variable number of arguments. */
1179 #define SETUP_INCOMING_VARARGS(ASF, MODE, TYPE, PAS, ST) \
1180 current_function_anonymous_args = 1;
1182 /* Define the `__builtin_va_list' type for the ABI. */
1183 #define BUILD_VA_LIST_TYPE(VALIST) \
1184 (VALIST) = sh_build_va_list ()
1186 /* Implement `va_start' for varargs and stdarg. */
1187 #define EXPAND_BUILTIN_VA_START(stdarg, valist, nextarg) \
1188 sh_va_start (stdarg, valist, nextarg)
1190 /* Implement `va_arg'. */
1191 #define EXPAND_BUILTIN_VA_ARG(valist, type) \
1192 sh_va_arg (valist, type)
1194 /* Call the function profiler with a given profile label.
1195 We use two .aligns, so as to make sure that both the .long is aligned
1196 on a 4 byte boundary, and that the .long is a fixed distance (2 bytes)
1197 from the trapa instruction. */
1199 #define FUNCTION_PROFILER(STREAM,LABELNO) \
1201 fprintf((STREAM), "\t.align\t2\n"); \
1202 fprintf((STREAM), "\ttrapa\t#33\n"); \
1203 fprintf((STREAM), "\t.align\t2\n"); \
1204 asm_fprintf((STREAM), "\t.long\t%LLP%d\n", (LABELNO)); \
1207 /* Define this macro if the code for function profiling should come
1208 before the function prologue. Normally, the profiling code comes
1211 #define PROFILE_BEFORE_PROLOGUE
1213 /* EXIT_IGNORE_STACK should be nonzero if, when returning from a function,
1214 the stack pointer does not matter. The value is tested only in
1215 functions that have frame pointers.
1216 No definition is equivalent to always zero. */
1218 #define EXIT_IGNORE_STACK 1
1220 /* Generate the assembly code for function exit
1221 Just dump out any accumulated constant table. */
1223 #define FUNCTION_EPILOGUE(STREAM, SIZE) function_epilogue ((STREAM), (SIZE))
1226 On the SH, the trampoline looks like
1227 2 0002 D202 mov.l l2,r2
1228 1 0000 D301 mov.l l1,r3
1231 5 0008 00000000 l1: .long area
1232 6 000c 00000000 l2: .long function */
1234 /* Length in units of the trampoline for entering a nested function. */
1235 #define TRAMPOLINE_SIZE 16
1237 /* Alignment required for a trampoline in bits . */
1238 #define TRAMPOLINE_ALIGNMENT \
1239 ((CACHE_LOG < 3 || (TARGET_SMALLCODE && ! TARGET_HARVARD)) ? 32 : 64)
1241 /* Emit RTL insns to initialize the variable parts of a trampoline.
1242 FNADDR is an RTX for the address of the function's pure code.
1243 CXT is an RTX for the static chain value for the function. */
1245 #define INITIALIZE_TRAMPOLINE(TRAMP, FNADDR, CXT) do \
1247 emit_move_insn (gen_rtx_MEM (SImode, (TRAMP)), \
1248 GEN_INT (TARGET_LITTLE_ENDIAN ? 0xd301d202 : 0xd202d301));\
1249 emit_move_insn (gen_rtx_MEM (SImode, plus_constant ((TRAMP), 4)), \
1250 GEN_INT (TARGET_LITTLE_ENDIAN ? 0x0009422b : 0x422b0009));\
1251 emit_move_insn (gen_rtx_MEM (SImode, plus_constant ((TRAMP), 8)), \
1253 emit_move_insn (gen_rtx_MEM (SImode, plus_constant ((TRAMP), 12)), \
1255 if (TARGET_HARVARD) \
1257 if (TARGET_USERMODE) \
1258 emit_library_call (gen_rtx_SYMBOL_REF (Pmode, "__ic_invalidate"),\
1259 0, VOIDmode, 1, (TRAMP), SImode); \
1261 emit_insn (gen_ic_invalidate_line (TRAMP)); \
1265 /* A C expression whose value is RTL representing the value of the return
1266 address for the frame COUNT steps up from the current frame.
1267 FRAMEADDR is already the frame pointer of the COUNT frame, so we
1268 can ignore COUNT. */
1270 #define RETURN_ADDR_RTX(COUNT, FRAME) \
1272 ? gen_rtx_MEM (Pmode, gen_rtx_REG (Pmode, RETURN_ADDRESS_POINTER_REGNUM)) \
1275 /* Generate necessary RTL for __builtin_saveregs(). */
1276 #define EXPAND_BUILTIN_SAVEREGS() sh_builtin_saveregs ()
1278 /* Addressing modes, and classification of registers for them. */
1279 #define HAVE_POST_INCREMENT 1
1280 /*#define HAVE_PRE_INCREMENT 1*/
1281 /*#define HAVE_POST_DECREMENT 1*/
1282 #define HAVE_PRE_DECREMENT 1
1284 #define USE_LOAD_POST_INCREMENT(mode) ((mode == SImode || mode == DImode) \
1286 #define USE_LOAD_PRE_DECREMENT(mode) 0
1287 #define USE_STORE_POST_INCREMENT(mode) 0
1288 #define USE_STORE_PRE_DECREMENT(mode) ((mode == SImode || mode == DImode) \
1291 #define MOVE_BY_PIECES_P(SIZE, ALIGN) (move_by_pieces_ninsns (SIZE, ALIGN) \
1292 < (TARGET_SMALLCODE ? 2 : \
1293 ((ALIGN >= 32) ? 16 : 2)))
1295 /* Macros to check register numbers against specific register classes. */
1297 /* These assume that REGNO is a hard or pseudo reg number.
1298 They give nonzero only if REGNO is a hard reg of the suitable class
1299 or a pseudo reg currently allocated to a suitable hard reg.
1300 Since they use reg_renumber, they are safe only once reg_renumber
1301 has been allocated, which happens in local-alloc.c. */
1303 #define REGNO_OK_FOR_BASE_P(REGNO) \
1304 (GENERAL_OR_AP_REGISTER_P (REGNO) \
1305 || GENERAL_OR_AP_REGISTER_P (reg_renumber[(REGNO)]))
1306 #define REGNO_OK_FOR_INDEX_P(REGNO) \
1307 ((REGNO) == R0_REG || (unsigned) reg_renumber[(REGNO)] == R0_REG)
1309 /* Maximum number of registers that can appear in a valid memory
1312 #define MAX_REGS_PER_ADDRESS 2
1314 /* Recognize any constant value that is a valid address. */
1316 #define CONSTANT_ADDRESS_P(X) (GET_CODE (X) == LABEL_REF)
1318 /* Nonzero if the constant value X is a legitimate general operand. */
1320 #define LEGITIMATE_CONSTANT_P(X) \
1321 (GET_CODE (X) != CONST_DOUBLE \
1322 || GET_MODE (X) == DFmode || GET_MODE (X) == SFmode \
1323 || (TARGET_SH3E && (fp_zero_operand (X) || fp_one_operand (X))))
1325 /* The macros REG_OK_FOR..._P assume that the arg is a REG rtx
1326 and check its validity for a certain class.
1327 We have two alternate definitions for each of them.
1328 The usual definition accepts all pseudo regs; the other rejects
1329 them unless they have been allocated suitable hard regs.
1330 The symbol REG_OK_STRICT causes the latter definition to be used. */
1332 #ifndef REG_OK_STRICT
1334 /* Nonzero if X is a hard reg that can be used as a base reg
1335 or if it is a pseudo reg. */
1336 #define REG_OK_FOR_BASE_P(X) \
1337 (GENERAL_OR_AP_REGISTER_P (REGNO (X)) || REGNO (X) >= FIRST_PSEUDO_REGISTER)
1339 /* Nonzero if X is a hard reg that can be used as an index
1340 or if it is a pseudo reg. */
1341 #define REG_OK_FOR_INDEX_P(X) \
1342 (REGNO (X) == R0_REG || REGNO (X) >= FIRST_PSEUDO_REGISTER)
1344 /* Nonzero if X/OFFSET is a hard reg that can be used as an index
1345 or if X is a pseudo reg. */
1346 #define SUBREG_OK_FOR_INDEX_P(X, OFFSET) \
1347 ((REGNO (X) == R0_REG && OFFSET == 0) || REGNO (X) >= FIRST_PSEUDO_REGISTER)
1351 /* Nonzero if X is a hard reg that can be used as a base reg. */
1352 #define REG_OK_FOR_BASE_P(X) \
1353 REGNO_OK_FOR_BASE_P (REGNO (X))
1355 /* Nonzero if X is a hard reg that can be used as an index. */
1356 #define REG_OK_FOR_INDEX_P(X) \
1357 REGNO_OK_FOR_INDEX_P (REGNO (X))
1359 /* Nonzero if X/OFFSET is a hard reg that can be used as an index. */
1360 #define SUBREG_OK_FOR_INDEX_P(X, OFFSET) \
1361 (REGNO_OK_FOR_INDEX_P (REGNO (X)) && (OFFSET) == 0)
1365 /* The 'Q' constraint is a pc relative load operand. */
1366 #define EXTRA_CONSTRAINT_Q(OP) \
1367 (GET_CODE (OP) == MEM \
1368 && ((GET_CODE (XEXP ((OP), 0)) == LABEL_REF) \
1369 || (GET_CODE (XEXP ((OP), 0)) == CONST \
1370 && GET_CODE (XEXP (XEXP ((OP), 0), 0)) == PLUS \
1371 && GET_CODE (XEXP (XEXP (XEXP ((OP), 0), 0), 0)) == LABEL_REF \
1372 && GET_CODE (XEXP (XEXP (XEXP ((OP), 0), 0), 1)) == CONST_INT)))
1374 #define EXTRA_CONSTRAINT(OP, C) \
1375 ((C) == 'Q' ? EXTRA_CONSTRAINT_Q (OP) \
1378 /* GO_IF_LEGITIMATE_ADDRESS recognizes an RTL expression
1379 that is a valid memory address for an instruction.
1380 The MODE argument is the machine mode for the MEM expression
1381 that wants to use this address. */
1383 #define MODE_DISP_OK_4(X,MODE) \
1384 (GET_MODE_SIZE (MODE) == 4 && (unsigned) INTVAL (X) < 64 \
1385 && ! (INTVAL (X) & 3) && ! (TARGET_SH3E && (MODE) == SFmode))
1387 #define MODE_DISP_OK_8(X,MODE) \
1388 ((GET_MODE_SIZE(MODE)==8) && ((unsigned)INTVAL(X)<60) \
1389 && ! (INTVAL(X) & 3) && ! (TARGET_SH4 && (MODE) == DFmode))
1391 #define BASE_REGISTER_RTX_P(X) \
1392 ((GET_CODE (X) == REG && REG_OK_FOR_BASE_P (X)) \
1393 || (GET_CODE (X) == SUBREG \
1394 && GET_CODE (SUBREG_REG (X)) == REG \
1395 && REG_OK_FOR_BASE_P (SUBREG_REG (X))))
1397 /* Since this must be r0, which is a single register class, we must check
1398 SUBREGs more carefully, to be sure that we don't accept one that extends
1399 outside the class. */
1400 #define INDEX_REGISTER_RTX_P(X) \
1401 ((GET_CODE (X) == REG && REG_OK_FOR_INDEX_P (X)) \
1402 || (GET_CODE (X) == SUBREG \
1403 && GET_CODE (SUBREG_REG (X)) == REG \
1404 && SUBREG_OK_FOR_INDEX_P (SUBREG_REG (X), SUBREG_BYTE (X))))
1406 /* Jump to LABEL if X is a valid address RTX. This must also take
1407 REG_OK_STRICT into account when deciding about valid registers, but it uses
1408 the above macros so we are in luck.
1416 /* ??? The SH3e does not have the REG+disp addressing mode when loading values
1417 into the FRx registers. We implement this by setting the maximum offset
1418 to zero when the value is SFmode. This also restricts loading of SFmode
1419 values into the integer registers, but that can't be helped. */
1421 /* The SH allows a displacement in a QI or HI amode, but only when the
1422 other operand is R0. GCC doesn't handle this very well, so we forgo
1425 A legitimate index for a QI or HI is 0, SI can be any number 0..63,
1426 DI can be any number 0..60. */
1428 #define GO_IF_LEGITIMATE_INDEX(MODE, OP, LABEL) \
1430 if (GET_CODE (OP) == CONST_INT) \
1432 if (MODE_DISP_OK_4 ((OP), (MODE))) goto LABEL; \
1433 if (MODE_DISP_OK_8 ((OP), (MODE))) goto LABEL; \
1437 #define GO_IF_LEGITIMATE_ADDRESS(MODE, X, LABEL) \
1439 if (BASE_REGISTER_RTX_P (X)) \
1441 else if ((GET_CODE (X) == POST_INC || GET_CODE (X) == PRE_DEC) \
1442 && BASE_REGISTER_RTX_P (XEXP ((X), 0))) \
1444 else if (GET_CODE (X) == PLUS \
1445 && ((MODE) != PSImode || reload_completed)) \
1447 rtx xop0 = XEXP ((X), 0); \
1448 rtx xop1 = XEXP ((X), 1); \
1449 if (GET_MODE_SIZE (MODE) <= 8 && BASE_REGISTER_RTX_P (xop0)) \
1450 GO_IF_LEGITIMATE_INDEX ((MODE), xop1, LABEL); \
1451 if (GET_MODE_SIZE (MODE) <= 4 \
1452 || (TARGET_SH4 && TARGET_FMOVD && MODE == DFmode)) \
1454 if (BASE_REGISTER_RTX_P (xop1) && INDEX_REGISTER_RTX_P (xop0))\
1456 if (INDEX_REGISTER_RTX_P (xop1) && BASE_REGISTER_RTX_P (xop0))\
1462 /* Try machine-dependent ways of modifying an illegitimate address
1463 to be legitimate. If we find one, return the new, valid address.
1464 This macro is used in only one place: `memory_address' in explow.c.
1466 OLDX is the address as it was before break_out_memory_refs was called.
1467 In some cases it is useful to look at this to decide what needs to be done.
1469 MODE and WIN are passed so that this macro can use
1470 GO_IF_LEGITIMATE_ADDRESS.
1472 It is always safe for this macro to do nothing. It exists to recognize
1473 opportunities to optimize the output.
1475 For the SH, if X is almost suitable for indexing, but the offset is
1476 out of range, convert it into a normal form so that cse has a chance
1477 of reducing the number of address registers used. */
1479 #define LEGITIMIZE_ADDRESS(X,OLDX,MODE,WIN) \
1482 (X) = legitimize_pic_address (OLDX, MODE, NULL_RTX); \
1483 if (GET_CODE (X) == PLUS \
1484 && (GET_MODE_SIZE (MODE) == 4 \
1485 || GET_MODE_SIZE (MODE) == 8) \
1486 && GET_CODE (XEXP ((X), 1)) == CONST_INT \
1487 && BASE_REGISTER_RTX_P (XEXP ((X), 0)) \
1488 && ! (TARGET_SH4 && (MODE) == DFmode) \
1489 && ! (TARGET_SH3E && (MODE) == SFmode)) \
1491 rtx index_rtx = XEXP ((X), 1); \
1492 HOST_WIDE_INT offset = INTVAL (index_rtx), offset_base; \
1495 GO_IF_LEGITIMATE_INDEX ((MODE), index_rtx, WIN); \
1496 /* On rare occasions, we might get an unaligned pointer \
1497 that is indexed in a way to give an aligned address. \
1498 Therefore, keep the lower two bits in offset_base. */ \
1499 /* Instead of offset_base 128..131 use 124..127, so that \
1500 simple add suffices. */ \
1503 offset_base = ((offset + 4) & ~60) - 4; \
1506 offset_base = offset & ~60; \
1507 /* Sometimes the normal form does not suit DImode. We \
1508 could avoid that by using smaller ranges, but that \
1509 would give less optimized code when SImode is \
1511 if (GET_MODE_SIZE (MODE) + offset - offset_base <= 64) \
1513 sum = expand_binop (Pmode, add_optab, XEXP ((X), 0), \
1514 GEN_INT (offset_base), NULL_RTX, 0, \
1517 (X) = gen_rtx_PLUS (Pmode, sum, GEN_INT (offset - offset_base)); \
1523 /* A C compound statement that attempts to replace X, which is an address
1524 that needs reloading, with a valid memory address for an operand of
1525 mode MODE. WIN is a C statement label elsewhere in the code.
1527 Like for LEGITIMIZE_ADDRESS, for the SH we try to get a normal form
1528 of the address. That will allow inheritance of the address reloads. */
1530 #define LEGITIMIZE_RELOAD_ADDRESS(X,MODE,OPNUM,TYPE,IND_LEVELS,WIN) \
1532 if (GET_CODE (X) == PLUS \
1533 && (GET_MODE_SIZE (MODE) == 4 || GET_MODE_SIZE (MODE) == 8) \
1534 && GET_CODE (XEXP (X, 1)) == CONST_INT \
1535 && BASE_REGISTER_RTX_P (XEXP (X, 0)) \
1536 && ! (TARGET_SH4 && (MODE) == DFmode) \
1537 && ! ((MODE) == PSImode && (TYPE) == RELOAD_FOR_INPUT_ADDRESS)) \
1539 rtx index_rtx = XEXP (X, 1); \
1540 HOST_WIDE_INT offset = INTVAL (index_rtx), offset_base; \
1543 if (TARGET_SH3E && MODE == SFmode) \
1546 push_reload (index_rtx, NULL_RTX, &XEXP (X, 1), NULL, \
1547 INDEX_REG_CLASS, Pmode, VOIDmode, 0, 0, (OPNUM), \
1551 /* Instead of offset_base 128..131 use 124..127, so that \
1552 simple add suffices. */ \
1555 offset_base = ((offset + 4) & ~60) - 4; \
1558 offset_base = offset & ~60; \
1559 /* Sometimes the normal form does not suit DImode. We \
1560 could avoid that by using smaller ranges, but that \
1561 would give less optimized code when SImode is \
1563 if (GET_MODE_SIZE (MODE) + offset - offset_base <= 64) \
1565 sum = gen_rtx (PLUS, Pmode, XEXP (X, 0), \
1566 GEN_INT (offset_base)); \
1567 X = gen_rtx (PLUS, Pmode, sum, GEN_INT (offset - offset_base));\
1568 push_reload (sum, NULL_RTX, &XEXP (X, 0), NULL, \
1569 BASE_REG_CLASS, Pmode, VOIDmode, 0, 0, (OPNUM), \
1574 /* We must re-recognize what we created before. */ \
1575 else if (GET_CODE (X) == PLUS \
1576 && (GET_MODE_SIZE (MODE) == 4 || GET_MODE_SIZE (MODE) == 8) \
1577 && GET_CODE (XEXP (X, 0)) == PLUS \
1578 && GET_CODE (XEXP (XEXP (X, 0), 1)) == CONST_INT \
1579 && BASE_REGISTER_RTX_P (XEXP (XEXP (X, 0), 0)) \
1580 && GET_CODE (XEXP (X, 1)) == CONST_INT \
1581 && ! (TARGET_SH3E && MODE == SFmode)) \
1583 /* Because this address is so complex, we know it must have \
1584 been created by LEGITIMIZE_RELOAD_ADDRESS before; thus, \
1585 it is already unshared, and needs no further unsharing. */ \
1586 push_reload (XEXP ((X), 0), NULL_RTX, &XEXP ((X), 0), NULL, \
1587 BASE_REG_CLASS, Pmode, VOIDmode, 0, 0, (OPNUM), (TYPE));\
1592 /* Go to LABEL if ADDR (a legitimate address expression)
1593 has an effect that depends on the machine mode it is used for.
1595 ??? Strictly speaking, we should also include all indexed addressing,
1596 because the index scale factor is the length of the operand.
1597 However, the impact of GO_IF_MODE_DEPENDENT_ADDRESS would be to
1598 high if we did that. So we rely on reload to fix things up. */
1600 #define GO_IF_MODE_DEPENDENT_ADDRESS(ADDR,LABEL) \
1602 if (GET_CODE(ADDR) == PRE_DEC || GET_CODE(ADDR) == POST_INC) \
1606 /* Specify the machine mode that this machine uses
1607 for the index in the tablejump instruction. */
1608 #define CASE_VECTOR_MODE (TARGET_BIGTABLE ? SImode : HImode)
1610 #define CASE_VECTOR_SHORTEN_MODE(MIN_OFFSET, MAX_OFFSET, BODY) \
1611 ((MIN_OFFSET) >= 0 && (MAX_OFFSET) <= 127 \
1612 ? (ADDR_DIFF_VEC_FLAGS (BODY).offset_unsigned = 0, QImode) \
1613 : (MIN_OFFSET) >= 0 && (MAX_OFFSET) <= 255 \
1614 ? (ADDR_DIFF_VEC_FLAGS (BODY).offset_unsigned = 1, QImode) \
1615 : (MIN_OFFSET) >= -32768 && (MAX_OFFSET) <= 32767 ? HImode \
1618 /* Define as C expression which evaluates to nonzero if the tablejump
1619 instruction expects the table to contain offsets from the address of the
1621 Do not define this if the table should contain absolute addresses. */
1622 #define CASE_VECTOR_PC_RELATIVE 1
1624 /* Specify the tree operation to be used to convert reals to integers. */
1625 #define IMPLICIT_FIX_EXPR FIX_ROUND_EXPR
1627 /* This is the kind of divide that is easiest to do in the general case. */
1628 #define EASY_DIV_EXPR TRUNC_DIV_EXPR
1630 /* Since the SH3e has only `float' support, it is desirable to make all
1631 floating point types equivalent to `float'. */
1632 #define DOUBLE_TYPE_SIZE ((TARGET_SH3E && ! TARGET_SH4) ? 32 : 64)
1634 /* 'char' is signed by default. */
1635 #define DEFAULT_SIGNED_CHAR 1
1637 /* The type of size_t unsigned int. */
1638 #define SIZE_TYPE "unsigned int"
1640 #define WCHAR_TYPE "short unsigned int"
1641 #define WCHAR_TYPE_SIZE 16
1643 /* Don't cse the address of the function being compiled. */
1644 /*#define NO_RECURSIVE_FUNCTION_CSE 1*/
1646 /* Max number of bytes we can move from memory to memory
1647 in one reasonably fast instruction. */
1650 /* Max number of bytes we want move_by_pieces to be able to copy
1652 #define MOVE_MAX_PIECES (TARGET_SH4 ? 8 : 4)
1654 /* Define if operations between registers always perform the operation
1655 on the full register even if a narrower mode is specified. */
1656 #define WORD_REGISTER_OPERATIONS
1658 /* Define if loading in MODE, an integral mode narrower than BITS_PER_WORD
1659 will either zero-extend or sign-extend. The value of this macro should
1660 be the code that says which one of the two operations is implicitly
1661 done, NIL if none. */
1662 #define LOAD_EXTEND_OP(MODE) SIGN_EXTEND
1664 /* Define if loading short immediate values into registers sign extends. */
1665 #define SHORT_IMMEDIATES_SIGN_EXTEND
1667 /* Define this if zero-extension is slow (more than one real instruction).
1668 On the SH, it's only one instruction. */
1669 /* #define SLOW_ZERO_EXTEND */
1671 /* Nonzero if access to memory by bytes is no faster than for words. */
1672 #define SLOW_BYTE_ACCESS 1
1674 /* We assume that the store-condition-codes instructions store 0 for false
1675 and some other value for true. This is the value stored for true. */
1677 #define STORE_FLAG_VALUE 1
1679 /* Immediate shift counts are truncated by the output routines (or was it
1680 the assembler?). Shift counts in a register are truncated by SH. Note
1681 that the native compiler puts too large (> 32) immediate shift counts
1682 into a register and shifts by the register, letting the SH decide what
1683 to do instead of doing that itself. */
1684 /* ??? The library routines in lib1funcs.asm truncate the shift count.
1685 However, the SH3 has hardware shifts that do not truncate exactly as gcc
1686 expects - the sign bit is significant - so it appears that we need to
1687 leave this zero for correct SH3 code. */
1688 #define SHIFT_COUNT_TRUNCATED (! TARGET_SH3)
1690 /* All integers have the same format so truncation is easy. */
1691 #define TRULY_NOOP_TRUNCATION(OUTPREC,INPREC) 1
1693 /* Define this if addresses of constant functions
1694 shouldn't be put through pseudo regs where they can be cse'd.
1695 Desirable on machines where ordinary constants are expensive
1696 but a CALL with constant address is cheap. */
1697 /*#define NO_FUNCTION_CSE 1*/
1699 /* Chars and shorts should be passed as ints. */
1700 #define PROMOTE_PROTOTYPES 1
1702 /* The machine modes of pointers and functions. */
1703 #define Pmode SImode
1704 #define FUNCTION_MODE Pmode
1706 /* The relative costs of various types of constants. */
1708 #define CONST_COSTS(RTX, CODE, OUTER_CODE) \
1710 if (CONST_OK_FOR_I (INTVAL (RTX))) \
1712 else if (((OUTER_CODE) == AND || (OUTER_CODE) == IOR || (OUTER_CODE) == XOR) \
1713 && CONST_OK_FOR_L (INTVAL (RTX))) \
1721 case CONST_DOUBLE: \
1724 #define RTX_COSTS(X, CODE, OUTER_CODE) \
1726 return COSTS_N_INSNS (addsubcosts (X)); \
1728 return COSTS_N_INSNS (andcosts (X)); \
1730 return COSTS_N_INSNS (multcosts (X)); \
1734 return COSTS_N_INSNS (shiftcosts (X)); \
1739 return COSTS_N_INSNS (20); \
1744 /* The multiply insn on the SH1 and the divide insns on the SH1 and SH2
1745 are actually function calls with some special constraints on arguments
1748 These macros tell reorg that the references to arguments and
1749 register clobbers for insns of type sfunc do not appear to happen
1750 until after the millicode call. This allows reorg to put insns
1751 which set the argument registers into the delay slot of the millicode
1752 call -- thus they act more like traditional CALL_INSNs.
1754 get_attr_is_sfunc will try to recognize the given insn, so make sure to
1755 filter out things it will not accept -- SEQUENCE, USE and CLOBBER insns
1758 #define INSN_SETS_ARE_DELAYED(X) \
1759 ((GET_CODE (X) == INSN \
1760 && GET_CODE (PATTERN (X)) != SEQUENCE \
1761 && GET_CODE (PATTERN (X)) != USE \
1762 && GET_CODE (PATTERN (X)) != CLOBBER \
1763 && get_attr_is_sfunc (X)))
1765 #define INSN_REFERENCES_ARE_DELAYED(X) \
1766 ((GET_CODE (X) == INSN \
1767 && GET_CODE (PATTERN (X)) != SEQUENCE \
1768 && GET_CODE (PATTERN (X)) != USE \
1769 && GET_CODE (PATTERN (X)) != CLOBBER \
1770 && get_attr_is_sfunc (X)))
1773 /* Position Independent Code. */
1774 /* Define this macro if references to a symbol must be treated
1775 differently depending on something about the variable or function
1776 named by the symbol (such as what section it is in).
1778 On SH, if using PIC, mark a SYMBOL_REF for a non-global symbol
1779 so that we may access it using GOTOFF instead of GOT. */
1781 #define ENCODE_SECTION_INFO(DECL) \
1786 rtx rtl = (TREE_CODE_CLASS (TREE_CODE (DECL)) != 'd' \
1787 ? TREE_CST_RTL (DECL) : DECL_RTL (DECL)); \
1789 SYMBOL_REF_FLAG (XEXP (rtl, 0)) = \
1790 (TREE_CODE_CLASS (TREE_CODE (DECL)) != 'd' \
1791 || ! TREE_PUBLIC (DECL)); \
1796 /* We can't directly access anything that contains a symbol,
1797 nor can we indirect via the constant pool. */
1798 #define LEGITIMATE_PIC_OPERAND_P(X) \
1799 (! nonpic_symbol_mentioned_p (X) \
1800 && (! CONSTANT_POOL_ADDRESS_P (X) \
1801 || ! nonpic_symbol_mentioned_p (get_pool_constant (X))))
1803 #define SYMBOLIC_CONST_P(X) \
1804 ((GET_CODE (X) == SYMBOL_REF || GET_CODE (X) == LABEL_REF) \
1805 && nonpic_symbol_mentioned_p (X))
1807 /* Compute the cost of an address. For the SH, all valid addresses are
1808 the same cost. Use a slightly higher cost for reg + reg addressing,
1809 since it increases pressure on r0. */
1811 #define ADDRESS_COST(X) (GET_CODE (X) == PLUS && ! CONSTANT_P (XEXP (X, 1)) \
1814 /* Compute extra cost of moving data between one register class
1817 /* Regclass always uses 2 for moves in the same register class;
1818 If SECONDARY*_RELOAD_CLASS says something about the src/dst pair,
1819 it uses this information. Hence, the general register <-> floating point
1820 register information here is not used for SFmode. */
1821 #define REGISTER_MOVE_COST(MODE, SRCCLASS, DSTCLASS) \
1822 ((((DSTCLASS) == T_REGS) || ((DSTCLASS) == PR_REGS)) ? 10 \
1823 : ((((DSTCLASS) == FP0_REGS || (DSTCLASS) == FP_REGS || (DSTCLASS) == DF_REGS) \
1824 && ((SRCCLASS) == GENERAL_REGS || (SRCCLASS) == R0_REGS)) \
1825 || (((DSTCLASS) == GENERAL_REGS || (DSTCLASS) == R0_REGS) \
1826 && ((SRCCLASS) == FP0_REGS || (SRCCLASS) == FP_REGS \
1827 || (SRCCLASS) == DF_REGS))) \
1828 ? TARGET_FMOVD ? 8 : 12 \
1829 : (((DSTCLASS) == FPUL_REGS \
1830 && ((SRCCLASS) == GENERAL_REGS || (SRCCLASS) == R0_REGS)) \
1831 || (SRCCLASS == FPUL_REGS \
1832 && ((DSTCLASS) == GENERAL_REGS || (DSTCLASS) == R0_REGS))) \
1834 : (((DSTCLASS) == FPUL_REGS \
1835 && ((SRCCLASS) == PR_REGS || (SRCCLASS) == MAC_REGS \
1836 || (SRCCLASS) == T_REGS)) \
1837 || ((SRCCLASS) == FPUL_REGS \
1838 && ((DSTCLASS) == PR_REGS || (DSTCLASS) == MAC_REGS))) \
1842 /* ??? Perhaps make MEMORY_MOVE_COST depend on compiler option? This
1843 would be so that people with slow memory systems could generate
1844 different code that does fewer memory accesses. */
1846 /* A C expression for the cost of a branch instruction. A value of 1
1847 is the default; other values are interpreted relative to that.
1848 The SH1 does not have delay slots, hence we get a pipeline stall
1849 at every branch. The SH4 is superscalar, so the single delay slot
1850 is not sufficient to keep both pipelines filled. */
1851 #define BRANCH_COST (! TARGET_SH2 || TARGET_HARD_SH4 ? 2 : 1)
1853 /* Assembler output control. */
1855 /* A C string constant describing how to begin a comment in the target
1856 assembler language. The compiler assumes that the comment will end at
1857 the end of the line. */
1858 #define ASM_COMMENT_START "!"
1860 /* The text to go at the start of the assembler file. */
1861 #define ASM_FILE_START(STREAM) \
1862 output_file_start (STREAM)
1864 #define ASM_FILE_END(STREAM)
1866 #define ASM_APP_ON ""
1867 #define ASM_APP_OFF ""
1868 #define FILE_ASM_OP "\t.file\n"
1869 #define IDENT_ASM_OP "\t.ident\n"
1870 #define SET_ASM_OP "\t.set\t"
1872 /* How to change between sections. */
1874 #define TEXT_SECTION_ASM_OP "\t.text"
1875 #define DATA_SECTION_ASM_OP "\t.data"
1876 #define CTORS_SECTION_ASM_OP "\t.section\t.ctors\n"
1877 #define DTORS_SECTION_ASM_OP "\t.section\t.dtors\n"
1878 #define EXTRA_SECTIONS in_ctors, in_dtors
1879 #define EXTRA_SECTION_FUNCTIONS \
1883 if (in_section != in_ctors) \
1885 fprintf (asm_out_file, "%s\n", CTORS_SECTION_ASM_OP); \
1886 in_section = in_ctors; \
1892 if (in_section != in_dtors) \
1894 fprintf (asm_out_file, "%s\n", DTORS_SECTION_ASM_OP); \
1895 in_section = in_dtors; \
1899 /* If defined, a C expression whose value is a string containing the
1900 assembler operation to identify the following data as
1901 uninitialized global data. If not defined, and neither
1902 `ASM_OUTPUT_BSS' nor `ASM_OUTPUT_ALIGNED_BSS' are defined,
1903 uninitialized global data will be output in the data section if
1904 `-fno-common' is passed, otherwise `ASM_OUTPUT_COMMON' will be
1906 #ifndef BSS_SECTION_ASM_OP
1907 #define BSS_SECTION_ASM_OP "\t.section\t.bss"
1910 /* Like `ASM_OUTPUT_BSS' except takes the required alignment as a
1911 separate, explicit argument. If you define this macro, it is used
1912 in place of `ASM_OUTPUT_BSS', and gives you more flexibility in
1913 handling the required alignment of the variable. The alignment is
1914 specified as the number of bits.
1916 Try to use function `asm_output_aligned_bss' defined in file
1917 `varasm.c' when defining this macro. */
1918 #ifndef ASM_OUTPUT_ALIGNED_BSS
1919 #define ASM_OUTPUT_ALIGNED_BSS(FILE, DECL, NAME, SIZE, ALIGN) \
1920 asm_output_aligned_bss (FILE, DECL, NAME, SIZE, ALIGN)
1923 /* Define this so that jump tables go in same section as the current function,
1924 which could be text or it could be a user defined section. */
1925 #define JUMP_TABLES_IN_TEXT_SECTION 1
1927 /* A C statement to output something to the assembler file to switch to section
1928 NAME for object DECL which is either a FUNCTION_DECL, a VAR_DECL or
1929 NULL_TREE. Some target formats do not support arbitrary sections. Do not
1930 define this macro in such cases. */
1932 #define ASM_OUTPUT_SECTION_NAME(FILE, DECL, NAME, RELOC) \
1933 do { fprintf (FILE, ".section\t%s\n", NAME); } while (0)
1935 /* This is the pseudo-op used to generate a reference to a specific
1936 symbol in some section. */
1938 #define INT_ASM_OP "\t.long\t"
1940 /* A C statement (sans semicolon) to output an
1941 element in the table of global constructors. */
1942 #define ASM_OUTPUT_CONSTRUCTOR(FILE, NAME) \
1946 fprintf (FILE, "%s", INT_ASM_OP); \
1947 assemble_name (FILE, NAME); \
1948 fprintf (FILE, "\n"); \
1952 /* A C statement (sans semicolon) to output an
1953 element in the table of global destructors. */
1954 #define ASM_OUTPUT_DESTRUCTOR(FILE,NAME) \
1958 fprintf (FILE, "%s", INT_ASM_OP); \
1959 assemble_name (FILE, NAME); \
1960 fprintf (FILE, "\n"); \
1964 #undef DO_GLOBAL_CTORS_BODY
1966 #define DO_GLOBAL_CTORS_BODY \
1968 typedef (*pfunc)(); \
1969 extern pfunc __ctors[]; \
1970 extern pfunc __ctors_end[]; \
1972 for (p = __ctors_end; p > __ctors; ) \
1978 #undef DO_GLOBAL_DTORS_BODY
1979 #define DO_GLOBAL_DTORS_BODY \
1981 typedef (*pfunc)(); \
1982 extern pfunc __dtors[]; \
1983 extern pfunc __dtors_end[]; \
1985 for (p = __dtors; p < __dtors_end; p++) \
1991 #define ASM_OUTPUT_REG_PUSH(file, v) \
1992 fprintf ((file), "\tmov.l\tr%d,@-r15\n", (v));
1994 #define ASM_OUTPUT_REG_POP(file, v) \
1995 fprintf ((file), "\tmov.l\t@r15+,r%d\n", (v));
1997 /* The assembler's names for the registers. RFP need not always be used as
1998 the Real framepointer; it can also be used as a normal general register.
1999 Note that the name `fp' is horribly misleading since `fp' is in fact only
2000 the argument-and-return-context pointer. */
2002 extern char fp_reg_names[][5];
2004 #define REGISTER_NAMES \
2006 "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \
2007 "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15", \
2008 "ap", "pr", "t", "gbr", "mach","macl", fp_reg_names[16], "rap", \
2009 fp_reg_names[0], fp_reg_names[1] , fp_reg_names[2], fp_reg_names[3], \
2010 fp_reg_names[4], fp_reg_names[5], fp_reg_names[6], fp_reg_names[7], \
2011 fp_reg_names[8], fp_reg_names[9], fp_reg_names[10], fp_reg_names[11], \
2012 fp_reg_names[12], fp_reg_names[13], fp_reg_names[14], fp_reg_names[15], \
2013 fp_reg_names[17], fp_reg_names[18], fp_reg_names[19], fp_reg_names[20], \
2014 fp_reg_names[21], fp_reg_names[22], fp_reg_names[23], fp_reg_names[24], \
2018 #define DEBUG_REGISTER_NAMES \
2020 "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \
2021 "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15", \
2022 "ap", "pr", "t", "gbr", "mach","macl", "fpul","rap", \
2023 "fr0","fr1","fr2", "fr3", "fr4", "fr5", "fr6", "fr7", \
2024 "fr8","fr9","fr10","fr11","fr12","fr13","fr14","fr15",\
2025 "xd0","xd2","xd4", "xd6", "xd8", "xd10","xd12","xd14", \
2029 /* DBX register number for a given compiler register number. */
2030 /* GDB has FPUL at 23 and FP0 at 25, so we must add one to all FP registers
2032 #define DBX_REGISTER_NUMBER(REGNO) \
2033 (((REGNO) >= 22 && (REGNO) <= 39) ? ((REGNO) + 1) : (REGNO))
2035 /* Output a label definition. */
2036 #define ASM_OUTPUT_LABEL(FILE,NAME) \
2037 do { assemble_name ((FILE), (NAME)); fputs (":\n", (FILE)); } while (0)
2039 /* This is how to output an assembler line
2040 that says to advance the location counter
2041 to a multiple of 2**LOG bytes. */
2043 #define ASM_OUTPUT_ALIGN(FILE,LOG) \
2045 fprintf ((FILE), "\t.align %d\n", (LOG))
2047 /* Output a function label definition. */
2048 #define ASM_DECLARE_FUNCTION_NAME(STREAM,NAME,DECL) \
2049 ASM_OUTPUT_LABEL((STREAM), (NAME))
2051 /* Output a globalising directive for a label. */
2052 #define ASM_GLOBALIZE_LABEL(STREAM,NAME) \
2053 (fprintf ((STREAM), "\t.global\t"), \
2054 assemble_name ((STREAM), (NAME)), \
2055 fputc ('\n', (STREAM)))
2057 /* The prefix to add to user-visible assembler symbols. */
2059 #define USER_LABEL_PREFIX "_"
2061 /* The prefix to add to an internally generated label. */
2063 #define LOCAL_LABEL_PREFIX ""
2065 /* Make an internal label into a string. */
2066 #define ASM_GENERATE_INTERNAL_LABEL(STRING, PREFIX, NUM) \
2067 sprintf ((STRING), "*%s%s%ld", LOCAL_LABEL_PREFIX, (PREFIX), (long)(NUM))
2069 /* Output an internal label definition. */
2070 #define ASM_OUTPUT_INTERNAL_LABEL(FILE,PREFIX,NUM) \
2071 asm_fprintf ((FILE), "%L%s%d:\n", (PREFIX), (NUM))
2073 /* #define ASM_OUTPUT_CASE_END(STREAM,NUM,TABLE) */
2075 /* Construct a private name. */
2076 #define ASM_FORMAT_PRIVATE_NAME(OUTVAR,NAME,NUMBER) \
2077 ((OUTVAR) = (char *) alloca (strlen (NAME) + 10), \
2078 sprintf ((OUTVAR), "%s.%d", (NAME), (NUMBER)))
2080 /* Output a relative address table. */
2082 #define ASM_OUTPUT_ADDR_DIFF_ELT(STREAM,BODY,VALUE,REL) \
2083 switch (GET_MODE (BODY)) \
2086 asm_fprintf ((STREAM), "\t.long\t%LL%d-%LL%d\n", (VALUE),(REL)); \
2089 asm_fprintf ((STREAM), "\t.word\t%LL%d-%LL%d\n", (VALUE),(REL)); \
2092 asm_fprintf ((STREAM), "\t.byte\t%LL%d-%LL%d\n", (VALUE),(REL)); \
2098 /* Output an absolute table element. */
2100 #define ASM_OUTPUT_ADDR_VEC_ELT(STREAM,VALUE) \
2101 if (TARGET_BIGTABLE) \
2102 asm_fprintf ((STREAM), "\t.long\t%LL%d\n", (VALUE)); \
2104 asm_fprintf ((STREAM), "\t.word\t%LL%d\n", (VALUE)); \
2106 /* Output various types of constants. */
2108 /* This is how to output an assembler line defining a `double'. */
2110 #define ASM_OUTPUT_DOUBLE(FILE,VALUE) \
2111 do { char dstr[30]; \
2112 REAL_VALUE_TO_DECIMAL ((VALUE), "%.20e", dstr); \
2113 fprintf ((FILE), "\t.double %s\n", dstr); \
2116 /* This is how to output an assembler line defining a `float' constant. */
2117 #define ASM_OUTPUT_FLOAT(FILE,VALUE) \
2118 do { char dstr[30]; \
2119 REAL_VALUE_TO_DECIMAL ((VALUE), "%.20e", dstr); \
2120 fprintf ((FILE), "\t.float %s\n", dstr); \
2123 #define ASM_OUTPUT_INT(STREAM, EXP) \
2124 (fprintf ((STREAM), "\t.long\t"), \
2125 output_addr_const ((STREAM), (EXP)), \
2126 fputc ('\n', (STREAM)))
2128 #define ASM_OUTPUT_SHORT(STREAM, EXP) \
2129 (fprintf ((STREAM), "\t.short\t"), \
2130 output_addr_const ((STREAM), (EXP)), \
2131 fputc ('\n', (STREAM)))
2133 #define ASM_OUTPUT_CHAR(STREAM, EXP) \
2134 (fprintf ((STREAM), "\t.byte\t"), \
2135 output_addr_const ((STREAM), (EXP)), \
2136 fputc ('\n', (STREAM)))
2138 #define ASM_OUTPUT_BYTE(STREAM, VALUE) \
2139 fprintf ((STREAM), "\t.byte\t%d\n", (VALUE)) \
2141 /* The next two are used for debug info when compiling with -gdwarf. */
2142 #define UNALIGNED_SHORT_ASM_OP "\t.uaword\t"
2143 #define UNALIGNED_INT_ASM_OP "\t.ualong\t"
2145 /* Loop alignment is now done in machine_dependent_reorg, so that
2146 branch shortening can know about it. */
2148 /* This is how to output an assembler line
2149 that says to advance the location counter by SIZE bytes. */
2151 #define ASM_OUTPUT_SKIP(FILE,SIZE) \
2152 fprintf ((FILE), "\t.space %d\n", (SIZE))
2154 /* This says how to output an assembler line
2155 to define a global common symbol. */
2157 #define ASM_OUTPUT_COMMON(FILE, NAME, SIZE, ROUNDED) \
2158 ( fputs ("\t.comm ", (FILE)), \
2159 assemble_name ((FILE), (NAME)), \
2160 fprintf ((FILE), ",%d\n", (SIZE)))
2162 /* This says how to output an assembler line
2163 to define a local common symbol. */
2165 #define ASM_OUTPUT_LOCAL(FILE, NAME, SIZE, ROUNDED) \
2166 ( fputs ("\t.lcomm ", (FILE)), \
2167 assemble_name ((FILE), (NAME)), \
2168 fprintf ((FILE), ",%d\n", (SIZE)))
2170 /* The assembler's parentheses characters. */
2171 #define ASM_OPEN_PAREN "("
2172 #define ASM_CLOSE_PAREN ")"
2174 /* Target characters. */
2175 #define TARGET_BELL 007
2176 #define TARGET_BS 010
2177 #define TARGET_TAB 011
2178 #define TARGET_NEWLINE 012
2179 #define TARGET_VT 013
2180 #define TARGET_FF 014
2181 #define TARGET_CR 015
2183 /* A C statement to be executed just prior to the output of
2184 assembler code for INSN, to modify the extracted operands so
2185 they will be output differently.
2187 Here the argument OPVEC is the vector containing the operands
2188 extracted from INSN, and NOPERANDS is the number of elements of
2189 the vector which contain meaningful data for this insn.
2190 The contents of this vector are what will be used to convert the insn
2191 template into assembler code, so you can change the assembler output
2192 by changing the contents of the vector. */
2194 #define FINAL_PRESCAN_INSN(INSN, OPVEC, NOPERANDS) \
2195 final_prescan_insn ((INSN), (OPVEC), (NOPERANDS))
2197 /* Print operand X (an rtx) in assembler syntax to file FILE.
2198 CODE is a letter or dot (`z' in `%z0') or 0 if no letter was specified.
2199 For `%' followed by punctuation, CODE is the punctuation and X is null. */
2201 #define PRINT_OPERAND(STREAM, X, CODE) print_operand ((STREAM), (X), (CODE))
2203 /* Print a memory address as an operand to reference that memory location. */
2205 #define PRINT_OPERAND_ADDRESS(STREAM,X) print_operand_address ((STREAM), (X))
2207 #define PRINT_OPERAND_PUNCT_VALID_P(CHAR) \
2208 ((CHAR) == '.' || (CHAR) == '#' || (CHAR) == '@' || (CHAR) == ',' \
2211 /* Recognize machine-specific patterns that may appear within
2212 constants. Used for PIC-specific UNSPECs. */
2213 #define OUTPUT_ADDR_CONST_EXTRA(STREAM, X, FAIL) \
2215 if (flag_pic && GET_CODE (X) == UNSPEC && XVECLEN ((X), 0) == 1) \
2217 switch (XINT ((X), 1)) \
2220 /* GLOBAL_OFFSET_TABLE or local symbols, no suffix. */ \
2221 output_addr_const ((STREAM), XVECEXP ((X), 0, 0)); \
2224 output_addr_const ((STREAM), XVECEXP ((X), 0, 0)); \
2225 fputs ("@GOT", (STREAM)); \
2227 case UNSPEC_GOTOFF: \
2228 output_addr_const ((STREAM), XVECEXP ((X), 0, 0)); \
2229 fputs ("@GOTOFF", (STREAM)); \
2232 output_addr_const ((STREAM), XVECEXP ((X), 0, 0)); \
2233 fputs ("@PLT", (STREAM)); \
2235 case UNSPEC_CALLER: \
2238 /* LPCS stands for Label for PIC Call Site. */ \
2239 ASM_GENERATE_INTERNAL_LABEL \
2240 (name, "LPCS", INTVAL (XVECEXP ((X), 0, 0))); \
2241 assemble_name ((STREAM), name); \
2254 extern struct rtx_def *sh_compare_op0;
2255 extern struct rtx_def *sh_compare_op1;
2257 /* Which processor to schedule for. The elements of the enumeration must
2258 match exactly the cpu attribute in the sh.md file. */
2260 enum processor_type {
2268 #define sh_cpu_attr ((enum attr_cpu)sh_cpu)
2269 extern enum processor_type sh_cpu;
2271 extern int optimize; /* needed for gen_casesi. */
2273 enum mdep_reorg_phase_e
2275 SH_BEFORE_MDEP_REORG,
2276 SH_INSERT_USES_LABELS,
2277 SH_SHORTEN_BRANCHES0,
2279 SH_SHORTEN_BRANCHES1,
2283 extern enum mdep_reorg_phase_e mdep_reorg_phase;
2285 #define MACHINE_DEPENDENT_REORG(X) machine_dependent_reorg(X)
2287 /* Generate calls to memcpy, memcmp and memset. */
2289 #define TARGET_MEM_FUNCTIONS
2291 /* Handle Hitachi compiler's pragmas. */
2292 #define REGISTER_TARGET_PRAGMAS(PFILE) do { \
2293 cpp_register_pragma (PFILE, 0, "interrupt", sh_pr_interrupt); \
2294 cpp_register_pragma (PFILE, 0, "trapa", sh_pr_trapa); \
2295 cpp_register_pragma (PFILE, 0, "nosave_low_regs", sh_pr_nosave_low_regs); \
2298 /* Set when processing a function with pragma interrupt turned on. */
2300 extern int pragma_interrupt;
2302 /* Set to an RTX containing the address of the stack to switch to
2303 for interrupt functions. */
2304 extern struct rtx_def *sp_switch;
2306 /* A C expression whose value is nonzero if IDENTIFIER with arguments ARGS
2307 is a valid machine specific attribute for DECL.
2308 The attributes in ATTRIBUTES have previously been assigned to DECL. */
2309 #define VALID_MACHINE_DECL_ATTRIBUTE(DECL, ATTRIBUTES, IDENTIFIER, ARGS) \
2310 sh_valid_machine_decl_attribute (DECL, ATTRIBUTES, IDENTIFIER, ARGS)
2312 #define PRAGMA_INSERT_ATTRIBUTES(node, pattr, prefix_attr) \
2313 sh_pragma_insert_attributes (node, pattr, prefix_attr)
2315 extern int rtx_equal_function_value_matters;
2316 extern struct rtx_def *fpscr_rtx;
2319 /* Instructions with unfilled delay slots take up an
2320 extra two bytes for the nop in the delay slot.
2321 sh-dsp parallel processing insns are four bytes long. */
2323 #define ADJUST_INSN_LENGTH(X, LENGTH) \
2324 (LENGTH) += sh_insn_length_adjustment (X);
2326 /* Define the codes that are matched by predicates in sh.c. */
2327 #define PREDICATE_CODES \
2328 {"arith_operand", {SUBREG, REG, CONST_INT}}, \
2329 {"arith_reg_operand", {SUBREG, REG}}, \
2330 {"arith_reg_or_0_operand", {SUBREG, REG, CONST_INT}}, \
2331 {"binary_float_operator", {PLUS, MULT}}, \
2332 {"commutative_float_operator", {PLUS, MULT}}, \
2333 {"fp_arith_reg_operand", {SUBREG, REG}}, \
2334 {"fpscr_operand", {REG}}, \
2335 {"fpul_operand", {REG}}, \
2336 {"general_movsrc_operand", {SUBREG, REG, CONST_INT, CONST_DOUBLE, MEM}}, \
2337 {"general_movdst_operand", {SUBREG, REG, MEM}}, \
2338 {"logical_operand", {SUBREG, REG, CONST_INT}}, \
2339 {"noncommutative_float_operator", {MINUS, DIV}}, \
2340 {"register_operand", {SUBREG, REG}}, \
2341 {"symbol_ref_operand", {SYMBOL_REF}},
2343 /* Define this macro if it is advisable to hold scalars in registers
2344 in a wider mode than that declared by the program. In such cases,
2345 the value is constrained to be within the bounds of the declared
2346 type, but kept valid in the wider mode. The signedness of the
2347 extension may differ from that of the type.
2349 Leaving the unsignedp unchanged gives better code than always setting it
2350 to 0. This is despite the fact that we have only signed char and short
2351 load instructions. */
2352 #define PROMOTE_MODE(MODE, UNSIGNEDP, TYPE) \
2353 if (GET_MODE_CLASS (MODE) == MODE_INT \
2354 && GET_MODE_SIZE (MODE) < UNITS_PER_WORD) \
2357 /* Defining PROMOTE_FUNCTION_ARGS eliminates some unnecessary zero/sign
2358 extensions applied to char/short functions arguments. Defining
2359 PROMOTE_FUNCTION_RETURN does the same for function returns. */
2361 #define PROMOTE_FUNCTION_ARGS
2362 #define PROMOTE_FUNCTION_RETURN
2364 /* ??? Define ACCUMULATE_OUTGOING_ARGS? This is more efficient than pushing
2365 and poping arguments. However, we do have push/pop instructions, and
2366 rather limited offsets (4 bits) in load/store instructions, so it isn't
2367 clear if this would give better code. If implemented, should check for
2368 compatibility problems. */
2370 /* A C statement (sans semicolon) to update the integer variable COST
2371 based on the relationship between INSN that is dependent on
2372 DEP_INSN through the dependence LINK. The default is to make no
2373 adjustment to COST. This can be used for example to specify to
2374 the scheduler that an output- or anti-dependence does not incur
2375 the same cost as a data-dependence. */
2377 #define ADJUST_COST(insn,link,dep_insn,cost) \
2381 if (GET_CODE(insn) == CALL_INSN) \
2383 /* The only input for a call that is timing-critical is the \
2384 function's address. */ \
2385 rtx call = PATTERN (insn); \
2387 if (GET_CODE (call) == PARALLEL) \
2388 call = XVECEXP (call, 0 ,0); \
2389 if (GET_CODE (call) == SET) \
2390 call = SET_SRC (call); \
2391 if (GET_CODE (call) == CALL && GET_CODE (XEXP (call, 0)) == MEM \
2392 && ! reg_set_p (XEXP (XEXP (call, 0), 0), dep_insn)) \
2395 /* All sfunc calls are parallels with at least four components. \
2396 Exploit this to avoid unnecessary calls to sfunc_uses_reg. */ \
2397 else if (GET_CODE (PATTERN (insn)) == PARALLEL \
2398 && XVECLEN (PATTERN (insn), 0) >= 4 \
2399 && (reg = sfunc_uses_reg (insn))) \
2401 /* Likewise, the most timing critical input for an sfuncs call \
2402 is the function address. However, sfuncs typically start \
2403 using their arguments pretty quickly. \
2404 Assume a four cycle delay before they are needed. */ \
2405 if (! reg_set_p (reg, dep_insn)) \
2406 cost -= TARGET_SUPERSCALAR ? 40 : 4; \
2408 /* Adjust load_si / pcload_si type insns latency. Use the known \
2409 nominal latency and form of the insn to speed up the check. */ \
2410 else if (cost == 3 \
2411 && GET_CODE (PATTERN (dep_insn)) == SET \
2412 /* Latency for dmpy type insns is also 3, so check the that \
2413 it's actually a move insn. */ \
2414 && general_movsrc_operand (SET_SRC (PATTERN (dep_insn)), SImode))\
2416 else if (cost == 30 \
2417 && GET_CODE (PATTERN (dep_insn)) == SET \
2418 && GET_MODE (SET_SRC (PATTERN (dep_insn))) == SImode) \
2422 #define SH_DYNAMIC_SHIFT_COST \
2423 (TARGET_HARD_SH4 ? 1 : TARGET_SH3 ? (TARGET_SMALLCODE ? 1 : 2) : 20)
2426 #define NUM_MODES_FOR_MODE_SWITCHING { FP_MODE_NONE }
2428 #define OPTIMIZE_MODE_SWITCHING(ENTITY) TARGET_SH4
2430 #define NORMAL_MODE(ENTITY) \
2431 (TARGET_FPU_SINGLE ? FP_MODE_SINGLE : FP_MODE_DOUBLE)
2433 #define EPILOGUE_USES(REGNO) ((TARGET_SH3E || TARGET_SH4) \
2434 && (REGNO) == FPSCR_REG)
2436 #define MODE_NEEDED(ENTITY, INSN) \
2437 (recog_memoized (INSN) >= 0 \
2438 ? get_attr_fp_mode (INSN) \
2441 #define MODE_PRIORITY_TO_MODE(ENTITY, N) \
2442 ((TARGET_FPU_SINGLE != 0) ^ (N) ? FP_MODE_SINGLE : FP_MODE_DOUBLE)
2444 #define EMIT_MODE_SET(ENTITY, MODE, HARD_REGS_LIVE) \
2445 fpscr_set_from_mem ((MODE), (HARD_REGS_LIVE))
2447 #define DWARF_LINE_MIN_INSTR_LENGTH 2
2449 /* SH constant pool breaks the devices in crtstuff.c to control section
2450 in where code resides. We have to write it as asm code. */
2451 #define CRT_CALL_STATIC_FUNCTION(func) \
2453 /* This avoids warnings about the static function being unused. */ \
2456 /* We should be passing FUNC to the asm statement as an asm input \
2457 operand, but this breaks with -fPIC. FIXME. */ \
2464 1: .long " USER_LABEL_PREFIX #func " - 0b\n\
2467 #endif /* ! GCC_SH_H */
OSDN Git Service
