1 /* Definitions of target machine for GNU compiler, for IBM RS/6000.
2 Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
3 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
4 Contributed by Richard Kenner (kenner@vlsi1.ultra.nyu.edu)
6 This file is part of GCC.
8 GCC is free software; you can redistribute it and/or modify it
9 under the terms of the GNU General Public License as published
10 by the Free Software Foundation; either version 2, or (at your
11 option) any later version.
13 GCC is distributed in the hope that it will be useful, but WITHOUT
14 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
15 or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
16 License for more details.
18 You should have received a copy of the GNU General Public License
19 along with GCC; see the file COPYING. If not, write to the
20 Free Software Foundation, 59 Temple Place - Suite 330, Boston,
21 MA 02111-1307, USA. */
23 /* Note that some other tm.h files include this one and then override
24 many of the definitions. */
26 /* Definitions for the object file format. These are set at
29 #define OBJECT_XCOFF 1
32 #define OBJECT_MACHO 4
34 #define TARGET_ELF (TARGET_OBJECT_FORMAT == OBJECT_ELF)
35 #define TARGET_XCOFF (TARGET_OBJECT_FORMAT == OBJECT_XCOFF)
36 #define TARGET_MACOS (TARGET_OBJECT_FORMAT == OBJECT_PEF)
37 #define TARGET_MACHO (TARGET_OBJECT_FORMAT == OBJECT_MACHO)
43 /* Default string to use for cpu if not specified. */
44 #ifndef TARGET_CPU_DEFAULT
45 #define TARGET_CPU_DEFAULT ((char *)0)
48 /* Common ASM definitions used by ASM_SPEC among the various targets
49 for handling -mcpu=xxx switches. */
50 #define ASM_CPU_SPEC \
52 %{mpower: %{!mpower2: -mpwr}} \
55 %{mno-power: %{!mpowerpc*: -mcom}} \
56 %{!mno-power: %{!mpower2: %(asm_default)}}} \
57 %{mcpu=common: -mcom} \
58 %{mcpu=power: -mpwr} \
59 %{mcpu=power2: -mpwrx} \
60 %{mcpu=power3: -m604} \
61 %{mcpu=power4: -mpower4} \
62 %{mcpu=powerpc: -mppc} \
64 %{mcpu=rios1: -mpwr} \
65 %{mcpu=rios2: -mpwrx} \
71 %{mcpu=405fp: -m405} \
73 %{mcpu=440fp: -m440} \
79 %{mcpu=ec603e: -mppc} \
92 %{mcpu=8540: -me500} \
93 %{maltivec: -maltivec}"
95 #define CPP_DEFAULT_SPEC ""
97 #define ASM_DEFAULT_SPEC ""
99 /* This macro defines names of additional specifications to put in the specs
100 that can be used in various specifications like CC1_SPEC. Its definition
101 is an initializer with a subgrouping for each command option.
103 Each subgrouping contains a string constant, that defines the
104 specification name, and a string constant that used by the GCC driver
107 Do not define this macro if it does not need to do anything. */
109 #define SUBTARGET_EXTRA_SPECS
111 #define EXTRA_SPECS \
112 { "cpp_default", CPP_DEFAULT_SPEC }, \
113 { "asm_cpu", ASM_CPU_SPEC }, \
114 { "asm_default", ASM_DEFAULT_SPEC }, \
115 SUBTARGET_EXTRA_SPECS
117 /* Architecture type. */
119 extern int target_flags;
121 /* Use POWER architecture instructions and MQ register. */
122 #define MASK_POWER 0x00000001
124 /* Use POWER2 extensions to POWER architecture. */
125 #define MASK_POWER2 0x00000002
127 /* Use PowerPC architecture instructions. */
128 #define MASK_POWERPC 0x00000004
130 /* Use PowerPC General Purpose group optional instructions, e.g. fsqrt. */
131 #define MASK_PPC_GPOPT 0x00000008
133 /* Use PowerPC Graphics group optional instructions, e.g. fsel. */
134 #define MASK_PPC_GFXOPT 0x00000010
136 /* Use PowerPC-64 architecture instructions. */
137 #define MASK_POWERPC64 0x00000020
139 /* Use revised mnemonic names defined for PowerPC architecture. */
140 #define MASK_NEW_MNEMONICS 0x00000040
142 /* Disable placing fp constants in the TOC; can be turned on when the
144 #define MASK_NO_FP_IN_TOC 0x00000080
146 /* Disable placing symbol+offset constants in the TOC; can be turned on when
147 the TOC overflows. */
148 #define MASK_NO_SUM_IN_TOC 0x00000100
150 /* Output only one TOC entry per module. Normally linking fails if
151 there are more than 16K unique variables/constants in an executable. With
152 this option, linking fails only if there are more than 16K modules, or
153 if there are more than 16K unique variables/constant in a single module.
155 This is at the cost of having 2 extra loads and one extra store per
156 function, and one less allocable register. */
157 #define MASK_MINIMAL_TOC 0x00000200
159 /* Nonzero for the 64bit model: longs and pointers are 64 bits. */
160 #define MASK_64BIT 0x00000400
162 /* Disable use of FPRs. */
163 #define MASK_SOFT_FLOAT 0x00000800
165 /* Enable load/store multiple, even on PowerPC */
166 #define MASK_MULTIPLE 0x00001000
168 /* Use string instructions for block moves */
169 #define MASK_STRING 0x00002000
171 /* Disable update form of load/store */
172 #define MASK_NO_UPDATE 0x00004000
174 /* Disable fused multiply/add operations */
175 #define MASK_NO_FUSED_MADD 0x00008000
177 /* Nonzero if we need to schedule the prolog and epilog. */
178 #define MASK_SCHED_PROLOG 0x00010000
180 /* Use AltiVec instructions. */
181 #define MASK_ALTIVEC 0x00020000
183 /* Return small structures in memory (as the AIX ABI requires). */
184 #define MASK_AIX_STRUCT_RET 0x00040000
186 /* The only remaining free bits are 0x00780000. sysv4.h uses
187 0x00800000 -> 0x40000000, and 0x80000000 is not available
188 because target_flags is signed. */
190 #define TARGET_POWER (target_flags & MASK_POWER)
191 #define TARGET_POWER2 (target_flags & MASK_POWER2)
192 #define TARGET_POWERPC (target_flags & MASK_POWERPC)
193 #define TARGET_PPC_GPOPT (target_flags & MASK_PPC_GPOPT)
194 #define TARGET_PPC_GFXOPT (target_flags & MASK_PPC_GFXOPT)
195 #define TARGET_NEW_MNEMONICS (target_flags & MASK_NEW_MNEMONICS)
196 #define TARGET_NO_FP_IN_TOC (target_flags & MASK_NO_FP_IN_TOC)
197 #define TARGET_NO_SUM_IN_TOC (target_flags & MASK_NO_SUM_IN_TOC)
198 #define TARGET_MINIMAL_TOC (target_flags & MASK_MINIMAL_TOC)
199 #define TARGET_64BIT (target_flags & MASK_64BIT)
200 #define TARGET_SOFT_FLOAT (target_flags & MASK_SOFT_FLOAT)
201 #define TARGET_MULTIPLE (target_flags & MASK_MULTIPLE)
202 #define TARGET_STRING (target_flags & MASK_STRING)
203 #define TARGET_NO_UPDATE (target_flags & MASK_NO_UPDATE)
204 #define TARGET_NO_FUSED_MADD (target_flags & MASK_NO_FUSED_MADD)
205 #define TARGET_SCHED_PROLOG (target_flags & MASK_SCHED_PROLOG)
206 #define TARGET_ALTIVEC (target_flags & MASK_ALTIVEC)
207 #define TARGET_AIX_STRUCT_RET (target_flags & MASK_AIX_STRUCT_RET)
209 #define TARGET_32BIT (! TARGET_64BIT)
210 #define TARGET_HARD_FLOAT (! TARGET_SOFT_FLOAT)
211 #define TARGET_UPDATE (! TARGET_NO_UPDATE)
212 #define TARGET_FUSED_MADD (! TARGET_NO_FUSED_MADD)
215 #define HAVE_AS_TLS 0
219 /* For libgcc2 we make sure this is a compile time constant */
220 #if defined (__64BIT__) || defined (__powerpc64__)
221 #define TARGET_POWERPC64 1
223 #define TARGET_POWERPC64 0
226 #define TARGET_POWERPC64 (target_flags & MASK_POWERPC64)
229 #define TARGET_XL_CALL 0
231 /* Run-time compilation parameters selecting different hardware subsets.
233 Macro to define tables used to set the flags.
234 This is a list in braces of pairs in braces,
235 each pair being { "NAME", VALUE }
236 where VALUE is the bits to set or minus the bits to clear.
237 An empty string NAME is used to identify the default VALUE. */
239 #define TARGET_SWITCHES \
240 {{"power", MASK_POWER | MASK_MULTIPLE | MASK_STRING, \
241 N_("Use POWER instruction set")}, \
242 {"power2", (MASK_POWER | MASK_MULTIPLE | MASK_STRING \
244 N_("Use POWER2 instruction set")}, \
245 {"no-power2", - MASK_POWER2, \
246 N_("Do not use POWER2 instruction set")}, \
247 {"no-power", - (MASK_POWER | MASK_POWER2 | MASK_MULTIPLE \
249 N_("Do not use POWER instruction set")}, \
250 {"powerpc", MASK_POWERPC, \
251 N_("Use PowerPC instruction set")}, \
252 {"no-powerpc", - (MASK_POWERPC | MASK_PPC_GPOPT \
253 | MASK_PPC_GFXOPT | MASK_POWERPC64), \
254 N_("Do not use PowerPC instruction set")}, \
255 {"powerpc-gpopt", MASK_POWERPC | MASK_PPC_GPOPT, \
256 N_("Use PowerPC General Purpose group optional instructions")},\
257 {"no-powerpc-gpopt", - MASK_PPC_GPOPT, \
258 N_("Don't use PowerPC General Purpose group optional instructions")},\
259 {"powerpc-gfxopt", MASK_POWERPC | MASK_PPC_GFXOPT, \
260 N_("Use PowerPC Graphics group optional instructions")},\
261 {"no-powerpc-gfxopt", - MASK_PPC_GFXOPT, \
262 N_("Don't use PowerPC Graphics group optional instructions")},\
263 {"powerpc64", MASK_POWERPC64, \
264 N_("Use PowerPC-64 instruction set")}, \
265 {"no-powerpc64", - MASK_POWERPC64, \
266 N_("Don't use PowerPC-64 instruction set")}, \
267 {"altivec", MASK_ALTIVEC , \
268 N_("Use AltiVec instructions")}, \
269 {"no-altivec", - MASK_ALTIVEC , \
270 N_("Don't use AltiVec instructions")}, \
271 {"new-mnemonics", MASK_NEW_MNEMONICS, \
272 N_("Use new mnemonics for PowerPC architecture")},\
273 {"old-mnemonics", -MASK_NEW_MNEMONICS, \
274 N_("Use old mnemonics for PowerPC architecture")},\
275 {"full-toc", - (MASK_NO_FP_IN_TOC | MASK_NO_SUM_IN_TOC \
276 | MASK_MINIMAL_TOC), \
277 N_("Put everything in the regular TOC")}, \
278 {"fp-in-toc", - MASK_NO_FP_IN_TOC, \
279 N_("Place floating point constants in TOC")}, \
280 {"no-fp-in-toc", MASK_NO_FP_IN_TOC, \
281 N_("Don't place floating point constants in TOC")},\
282 {"sum-in-toc", - MASK_NO_SUM_IN_TOC, \
283 N_("Place symbol+offset constants in TOC")}, \
284 {"no-sum-in-toc", MASK_NO_SUM_IN_TOC, \
285 N_("Don't place symbol+offset constants in TOC")},\
286 {"minimal-toc", MASK_MINIMAL_TOC, \
287 "Use only one TOC entry per procedure"}, \
288 {"minimal-toc", - (MASK_NO_FP_IN_TOC | MASK_NO_SUM_IN_TOC), \
290 {"no-minimal-toc", - MASK_MINIMAL_TOC, \
291 N_("Place variable addresses in the regular TOC")},\
292 {"hard-float", - MASK_SOFT_FLOAT, \
293 N_("Use hardware fp")}, \
294 {"soft-float", MASK_SOFT_FLOAT, \
295 N_("Do not use hardware fp")}, \
296 {"multiple", MASK_MULTIPLE, \
297 N_("Generate load/store multiple instructions")}, \
298 {"no-multiple", - MASK_MULTIPLE, \
299 N_("Do not generate load/store multiple instructions")},\
300 {"string", MASK_STRING, \
301 N_("Generate string instructions for block moves")},\
302 {"no-string", - MASK_STRING, \
303 N_("Do not generate string instructions for block moves")},\
304 {"update", - MASK_NO_UPDATE, \
305 N_("Generate load/store with update instructions")},\
306 {"no-update", MASK_NO_UPDATE, \
307 N_("Do not generate load/store with update instructions")},\
308 {"fused-madd", - MASK_NO_FUSED_MADD, \
309 N_("Generate fused multiply/add instructions")},\
310 {"no-fused-madd", MASK_NO_FUSED_MADD, \
311 N_("Don't generate fused multiply/add instructions")},\
312 {"sched-prolog", MASK_SCHED_PROLOG, \
314 {"no-sched-prolog", -MASK_SCHED_PROLOG, \
315 N_("Don't schedule the start and end of the procedure")},\
316 {"sched-epilog", MASK_SCHED_PROLOG, \
318 {"no-sched-epilog", -MASK_SCHED_PROLOG, \
320 {"aix-struct-return", MASK_AIX_STRUCT_RET, \
321 N_("Return all structures in memory (AIX default)")},\
322 {"svr4-struct-return", - MASK_AIX_STRUCT_RET, \
323 N_("Return small structures in registers (SVR4 default)")},\
324 {"no-aix-struct-return", - MASK_AIX_STRUCT_RET, \
326 {"no-svr4-struct-return", MASK_AIX_STRUCT_RET, \
329 {"", TARGET_DEFAULT | MASK_SCHED_PROLOG, \
332 #define TARGET_DEFAULT (MASK_POWER | MASK_MULTIPLE | MASK_STRING)
334 /* This is meant to be redefined in the host dependent files */
335 #define SUBTARGET_SWITCHES
337 /* Processor type. Order must match cpu attribute in MD file. */
360 extern enum processor_type rs6000_cpu;
362 /* Recast the processor type to the cpu attribute. */
363 #define rs6000_cpu_attr ((enum attr_cpu)rs6000_cpu)
365 /* Define generic processor types based upon current deployment. */
366 #define PROCESSOR_COMMON PROCESSOR_PPC601
367 #define PROCESSOR_POWER PROCESSOR_RIOS1
368 #define PROCESSOR_POWERPC PROCESSOR_PPC604
369 #define PROCESSOR_POWERPC64 PROCESSOR_RS64A
371 /* Define the default processor. This is overridden by other tm.h files. */
372 #define PROCESSOR_DEFAULT PROCESSOR_RIOS1
373 #define PROCESSOR_DEFAULT64 PROCESSOR_RS64A
375 /* Specify the dialect of assembler to use. New mnemonics is dialect one
376 and the old mnemonics are dialect zero. */
377 #define ASSEMBLER_DIALECT (TARGET_NEW_MNEMONICS ? 1 : 0)
379 /* This is meant to be overridden in target specific files. */
380 #define SUBTARGET_OPTIONS
382 #define TARGET_OPTIONS \
384 {"cpu=", &rs6000_select[1].string, \
385 N_("Use features of and schedule code for given CPU"), 0}, \
386 {"tune=", &rs6000_select[2].string, \
387 N_("Schedule code for given CPU"), 0}, \
388 {"debug=", &rs6000_debug_name, N_("Enable debug output"), 0}, \
389 {"traceback=", &rs6000_traceback_name, \
390 N_("Select full, part, or no traceback table"), 0}, \
391 {"abi=", &rs6000_abi_string, N_("Specify ABI to use"), 0}, \
392 {"long-double-", &rs6000_long_double_size_string, \
393 N_("Specify size of long double (64 or 128 bits)"), 0}, \
394 {"isel=", &rs6000_isel_string, \
395 N_("Specify yes/no if isel instructions should be generated"), 0}, \
396 {"spe=", &rs6000_spe_string, \
397 N_("Specify yes/no if SPE SIMD instructions should be generated"), 0},\
398 {"float-gprs=", &rs6000_float_gprs_string, \
399 N_("Specify yes/no if using floating point in the GPRs"), 0}, \
400 {"vrsave=", &rs6000_altivec_vrsave_string, \
401 N_("Specify yes/no if VRSAVE instructions should be generated for AltiVec"), 0}, \
402 {"longcall", &rs6000_longcall_switch, \
403 N_("Avoid all range limits on call instructions"), 0}, \
404 {"no-longcall", &rs6000_longcall_switch, "", 0}, \
405 {"align-", &rs6000_alignment_string, \
406 N_("Specify alignment of structure fields default/natural"), 0}, \
410 /* Support for a compile-time default CPU, et cetera. The rules are:
411 --with-cpu is ignored if -mcpu is specified.
412 --with-tune is ignored if -mtune is specified.
413 --with-float is ignored if -mhard-float or -msoft-float are
415 #define OPTION_DEFAULT_SPECS \
416 {"cpu", "%{!mcpu=*:-mcpu=%(VALUE)}" }, \
417 {"tune", "%{!mtune=*:-mtune=%(VALUE)}" }, \
418 {"float", "%{!msoft-float:%{!mhard-float:-m%(VALUE)-float}}" }
420 /* rs6000_select[0] is reserved for the default cpu defined via --with-cpu */
421 struct rs6000_cpu_select
429 extern struct rs6000_cpu_select rs6000_select[];
432 extern const char *rs6000_debug_name; /* Name for -mdebug-xxxx option */
433 extern const char *rs6000_abi_string; /* for -mabi={sysv,darwin,eabi,aix,altivec} */
434 extern int rs6000_debug_stack; /* debug stack applications */
435 extern int rs6000_debug_arg; /* debug argument handling */
437 #define TARGET_DEBUG_STACK rs6000_debug_stack
438 #define TARGET_DEBUG_ARG rs6000_debug_arg
440 extern const char *rs6000_traceback_name; /* Type of traceback table. */
442 /* These are separate from target_flags because we've run out of bits
444 extern const char *rs6000_long_double_size_string;
445 extern int rs6000_long_double_type_size;
446 extern int rs6000_altivec_abi;
447 extern int rs6000_spe_abi;
448 extern int rs6000_isel;
449 extern int rs6000_spe;
450 extern int rs6000_float_gprs;
451 extern const char *rs6000_float_gprs_string;
452 extern const char *rs6000_isel_string;
453 extern const char *rs6000_spe_string;
454 extern const char *rs6000_altivec_vrsave_string;
455 extern int rs6000_altivec_vrsave;
456 extern const char *rs6000_longcall_switch;
457 extern int rs6000_default_long_calls;
458 extern const char* rs6000_alignment_string;
459 extern int rs6000_alignment_flags;
461 /* Alignment options for fields in structures for sub-targets following
463 ALIGN_POWER word-aligns FP doubles (default AIX ABI).
464 ALIGN_NATURAL doubleword-aligns FP doubles (align to object size).
466 Override the macro definitions when compiling libobjc to avoid undefined
467 reference to rs6000_alignment_flags due to library's use of GCC alignment
468 macros which use the macros below. */
470 #ifndef IN_TARGET_LIBS
471 #define MASK_ALIGN_POWER 0x00000000
472 #define MASK_ALIGN_NATURAL 0x00000001
473 #define TARGET_ALIGN_NATURAL (rs6000_alignment_flags & MASK_ALIGN_NATURAL)
475 #define TARGET_ALIGN_NATURAL 0
478 #define TARGET_LONG_DOUBLE_128 (rs6000_long_double_type_size == 128)
479 #define TARGET_ALTIVEC_ABI rs6000_altivec_abi
480 #define TARGET_ALTIVEC_VRSAVE rs6000_altivec_vrsave
482 #define TARGET_SPE_ABI 0
484 #define TARGET_E500 0
485 #define TARGET_ISEL 0
486 #define TARGET_FPRS 1
488 /* Sometimes certain combinations of command options do not make sense
489 on a particular target machine. You can define a macro
490 `OVERRIDE_OPTIONS' to take account of this. This macro, if
491 defined, is executed once just after all the command options have
494 Don't use this macro to turn on various extra optimizations for
495 `-O'. That is what `OPTIMIZATION_OPTIONS' is for.
497 On the RS/6000 this is used to define the target cpu type. */
499 #define OVERRIDE_OPTIONS rs6000_override_options (TARGET_CPU_DEFAULT)
501 /* Define this to change the optimizations performed by default. */
502 #define OPTIMIZATION_OPTIONS(LEVEL,SIZE) optimization_options(LEVEL,SIZE)
504 /* Show we can debug even without a frame pointer. */
505 #define CAN_DEBUG_WITHOUT_FP
508 #define REGISTER_TARGET_PRAGMAS() do { \
509 c_register_pragma (0, "longcall", rs6000_pragma_longcall); \
512 /* Target #defines. */
513 #define TARGET_CPU_CPP_BUILTINS() \
514 rs6000_cpu_cpp_builtins (pfile)
516 /* This is used by rs6000_cpu_cpp_builtins to indicate the byte order
517 we're compiling for. Some configurations may need to override it. */
518 #define RS6000_CPU_CPP_ENDIAN_BUILTINS() \
521 if (BYTES_BIG_ENDIAN) \
523 builtin_define ("__BIG_ENDIAN__"); \
524 builtin_define ("_BIG_ENDIAN"); \
525 builtin_assert ("machine=bigendian"); \
529 builtin_define ("__LITTLE_ENDIAN__"); \
530 builtin_define ("_LITTLE_ENDIAN"); \
531 builtin_assert ("machine=littleendian"); \
536 /* Target machine storage layout. */
538 /* Define this macro if it is advisable to hold scalars in registers
539 in a wider mode than that declared by the program. In such cases,
540 the value is constrained to be within the bounds of the declared
541 type, but kept valid in the wider mode. The signedness of the
542 extension may differ from that of the type. */
544 #define PROMOTE_MODE(MODE,UNSIGNEDP,TYPE) \
545 if (GET_MODE_CLASS (MODE) == MODE_INT \
546 && GET_MODE_SIZE (MODE) < UNITS_PER_WORD) \
549 /* Define this if function arguments should also be promoted using the above
552 #define PROMOTE_FUNCTION_ARGS
554 /* Likewise, if the function return value is promoted. */
556 #define PROMOTE_FUNCTION_RETURN
558 /* Define this if most significant bit is lowest numbered
559 in instructions that operate on numbered bit-fields. */
560 /* That is true on RS/6000. */
561 #define BITS_BIG_ENDIAN 1
563 /* Define this if most significant byte of a word is the lowest numbered. */
564 /* That is true on RS/6000. */
565 #define BYTES_BIG_ENDIAN 1
567 /* Define this if most significant word of a multiword number is lowest
570 For RS/6000 we can decide arbitrarily since there are no machine
571 instructions for them. Might as well be consistent with bits and bytes. */
572 #define WORDS_BIG_ENDIAN 1
574 #define MAX_BITS_PER_WORD 64
576 /* Width of a word, in units (bytes). */
577 #define UNITS_PER_WORD (! TARGET_POWERPC64 ? 4 : 8)
579 #define MIN_UNITS_PER_WORD UNITS_PER_WORD
581 #define MIN_UNITS_PER_WORD 4
583 #define UNITS_PER_FP_WORD 8
584 #define UNITS_PER_ALTIVEC_WORD 16
585 #define UNITS_PER_SPE_WORD 8
587 /* Type used for ptrdiff_t, as a string used in a declaration. */
588 #define PTRDIFF_TYPE "int"
590 /* Type used for size_t, as a string used in a declaration. */
591 #define SIZE_TYPE "long unsigned int"
593 /* Type used for wchar_t, as a string used in a declaration. */
594 #define WCHAR_TYPE "short unsigned int"
596 /* Width of wchar_t in bits. */
597 #define WCHAR_TYPE_SIZE 16
599 /* A C expression for the size in bits of the type `short' on the
600 target machine. If you don't define this, the default is half a
601 word. (If this would be less than one storage unit, it is
602 rounded up to one unit.) */
603 #define SHORT_TYPE_SIZE 16
605 /* A C expression for the size in bits of the type `int' on the
606 target machine. If you don't define this, the default is one
608 #define INT_TYPE_SIZE 32
610 /* A C expression for the size in bits of the type `long' on the
611 target machine. If you don't define this, the default is one
613 #define LONG_TYPE_SIZE (TARGET_32BIT ? 32 : 64)
614 #define MAX_LONG_TYPE_SIZE 64
616 /* A C expression for the size in bits of the type `long long' on the
617 target machine. If you don't define this, the default is two
619 #define LONG_LONG_TYPE_SIZE 64
621 /* A C expression for the size in bits of the type `float' on the
622 target machine. If you don't define this, the default is one
624 #define FLOAT_TYPE_SIZE 32
626 /* A C expression for the size in bits of the type `double' on the
627 target machine. If you don't define this, the default is two
629 #define DOUBLE_TYPE_SIZE 64
631 /* A C expression for the size in bits of the type `long double' on
632 the target machine. If you don't define this, the default is two
634 #define LONG_DOUBLE_TYPE_SIZE rs6000_long_double_type_size
636 /* Constant which presents upper bound of the above value. */
637 #define MAX_LONG_DOUBLE_TYPE_SIZE 128
639 /* Define this to set long double type size to use in libgcc2.c, which can
640 not depend on target_flags. */
641 #ifdef __LONG_DOUBLE_128__
642 #define LIBGCC2_LONG_DOUBLE_TYPE_SIZE 128
644 #define LIBGCC2_LONG_DOUBLE_TYPE_SIZE 64
647 /* Work around rs6000_long_double_type_size dependency in ada/targtyps.c. */
648 #define WIDEST_HARDWARE_FP_SIZE 64
650 /* Width in bits of a pointer.
651 See also the macro `Pmode' defined below. */
652 #define POINTER_SIZE (TARGET_32BIT ? 32 : 64)
654 /* Allocation boundary (in *bits*) for storing arguments in argument list. */
655 #define PARM_BOUNDARY (TARGET_32BIT ? 32 : 64)
657 /* Boundary (in *bits*) on which stack pointer should be aligned. */
658 #define STACK_BOUNDARY ((TARGET_32BIT && !TARGET_ALTIVEC_ABI) ? 64 : 128)
660 /* Allocation boundary (in *bits*) for the code of a function. */
661 #define FUNCTION_BOUNDARY 32
663 /* No data type wants to be aligned rounder than this. */
664 #define BIGGEST_ALIGNMENT 128
666 /* A C expression to compute the alignment for a variables in the
667 local store. TYPE is the data type, and ALIGN is the alignment
668 that the object would ordinarily have. */
669 #define LOCAL_ALIGNMENT(TYPE, ALIGN) \
670 ((TARGET_ALTIVEC && TREE_CODE (TYPE) == VECTOR_TYPE) ? 128 : \
671 (TARGET_SPE && TREE_CODE (TYPE) == VECTOR_TYPE) ? 64 : ALIGN)
673 /* Alignment of field after `int : 0' in a structure. */
674 #define EMPTY_FIELD_BOUNDARY 32
676 /* Every structure's size must be a multiple of this. */
677 #define STRUCTURE_SIZE_BOUNDARY 8
679 /* Return 1 if a structure or array containing FIELD should be
680 accessed using `BLKMODE'.
682 For the SPE, simd types are V2SI, and gcc can be tempted to put the
683 entire thing in a DI and use subregs to access the internals.
684 store_bit_field() will force (subreg:DI (reg:V2SI x))'s to the
685 back-end. Because a single GPR can hold a V2SI, but not a DI, the
686 best thing to do is set structs to BLKmode and avoid Severe Tire
688 #define MEMBER_TYPE_FORCES_BLK(FIELD, MODE) \
689 (TARGET_SPE && TREE_CODE (TREE_TYPE (FIELD)) == VECTOR_TYPE)
691 /* A bit-field declared as `int' forces `int' alignment for the struct. */
692 #define PCC_BITFIELD_TYPE_MATTERS 1
694 /* Make strings word-aligned so strcpy from constants will be faster.
695 Make vector constants quadword aligned. */
696 #define CONSTANT_ALIGNMENT(EXP, ALIGN) \
697 (TREE_CODE (EXP) == STRING_CST \
698 && (ALIGN) < BITS_PER_WORD \
702 /* Make arrays of chars word-aligned for the same reasons.
703 Align vectors to 128 bits. */
704 #define DATA_ALIGNMENT(TYPE, ALIGN) \
705 (TREE_CODE (TYPE) == VECTOR_TYPE ? (TARGET_SPE_ABI ? 64 : 128) \
706 : TREE_CODE (TYPE) == ARRAY_TYPE \
707 && TYPE_MODE (TREE_TYPE (TYPE)) == QImode \
708 && (ALIGN) < BITS_PER_WORD ? BITS_PER_WORD : (ALIGN))
710 /* Nonzero if move instructions will actually fail to work
711 when given unaligned data. */
712 #define STRICT_ALIGNMENT 0
714 /* Define this macro to be the value 1 if unaligned accesses have a cost
715 many times greater than aligned accesses, for example if they are
716 emulated in a trap handler. */
717 #define SLOW_UNALIGNED_ACCESS(MODE, ALIGN) \
719 || (((MODE) == SFmode || (MODE) == DFmode || (MODE) == TFmode \
720 || (MODE) == DImode) \
723 /* Standard register usage. */
725 /* Number of actual hardware registers.
726 The hardware registers are assigned numbers for the compiler
727 from 0 to just below FIRST_PSEUDO_REGISTER.
728 All registers that the compiler knows about must be given numbers,
729 even those that are not normally considered general registers.
731 RS/6000 has 32 fixed-point registers, 32 floating-point registers,
732 an MQ register, a count register, a link register, and 8 condition
733 register fields, which we view here as separate registers. AltiVec
734 adds 32 vector registers and a VRsave register.
736 In addition, the difference between the frame and argument pointers is
737 a function of the number of registers saved, so we need to have a
738 register for AP that will later be eliminated in favor of SP or FP.
739 This is a normal register, but it is fixed.
741 We also create a pseudo register for float/int conversions, that will
742 really represent the memory location used. It is represented here as
743 a register, in order to work around problems in allocating stack storage
744 in inline functions. */
746 #define FIRST_PSEUDO_REGISTER 113
748 /* This must be included for pre gcc 3.0 glibc compatibility. */
749 #define PRE_GCC3_DWARF_FRAME_REGISTERS 77
751 /* Add 32 dwarf columns for synthetic SPE registers. The SPE
752 synthetic registers are 113 through 145. */
753 #define DWARF_FRAME_REGISTERS (FIRST_PSEUDO_REGISTER + 32)
755 /* The SPE has an additional 32 synthetic registers starting at 1200.
756 We must map them here to sane values in the unwinder to avoid a
757 huge hole in the unwind tables.
759 FIXME: the AltiVec ABI has AltiVec registers being 1124-1155, and
760 the VRSAVE SPR (SPR256) assigned to register 356. When AltiVec EH
761 is verified to be working, this macro should be changed
763 #define DWARF_REG_TO_UNWIND_COLUMN(r) ((r) > 1200 ? ((r) - 1200 + 113) : (r))
765 /* 1 for registers that have pervasive standard uses
766 and are not available for the register allocator.
768 On RS/6000, r1 is used for the stack. On Darwin, r2 is available
769 as a local register; for all other OS's r2 is the TOC pointer.
771 cr5 is not supposed to be used.
773 On System V implementations, r13 is fixed and not available for use. */
775 #define FIXED_REGISTERS \
776 {0, 1, FIXED_R2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, FIXED_R13, 0, 0, \
777 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
778 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
779 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
780 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 1, \
781 /* AltiVec registers. */ \
782 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
783 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
788 /* 1 for registers not available across function calls.
789 These must include the FIXED_REGISTERS and also any
790 registers that can be used without being saved.
791 The latter must include the registers where values are returned
792 and the register where structure-value addresses are passed.
793 Aside from that, you can include as many other registers as you like. */
795 #define CALL_USED_REGISTERS \
796 {1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, FIXED_R13, 0, 0, \
797 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
798 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, \
799 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
800 1, 1, 1, 1, 1, 1, 0, 0, 0, 1, 1, 1, 1, \
801 /* AltiVec registers. */ \
802 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
803 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
808 /* Like `CALL_USED_REGISTERS' except this macro doesn't require that
809 the entire set of `FIXED_REGISTERS' be included.
810 (`CALL_USED_REGISTERS' must be a superset of `FIXED_REGISTERS').
811 This macro is optional. If not specified, it defaults to the value
812 of `CALL_USED_REGISTERS'. */
814 #define CALL_REALLY_USED_REGISTERS \
815 {1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, FIXED_R13, 0, 0, \
816 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
817 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, \
818 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
819 1, 1, 1, 1, 1, 1, 0, 0, 0, 1, 1, 1, 1, \
820 /* AltiVec registers. */ \
821 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
822 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \
833 #define MAX_CR_REGNO 75
835 #define FIRST_ALTIVEC_REGNO 77
836 #define LAST_ALTIVEC_REGNO 108
837 #define TOTAL_ALTIVEC_REGS (LAST_ALTIVEC_REGNO - FIRST_ALTIVEC_REGNO + 1)
838 #define VRSAVE_REGNO 109
839 #define VSCR_REGNO 110
840 #define SPE_ACC_REGNO 111
841 #define SPEFSCR_REGNO 112
843 /* List the order in which to allocate registers. Each register must be
844 listed once, even those in FIXED_REGISTERS.
846 We allocate in the following order:
847 fp0 (not saved or used for anything)
848 fp13 - fp2 (not saved; incoming fp arg registers)
849 fp1 (not saved; return value)
850 fp31 - fp14 (saved; order given to save least number)
851 cr7, cr6 (not saved or special)
852 cr1 (not saved, but used for FP operations)
853 cr0 (not saved, but used for arithmetic operations)
854 cr4, cr3, cr2 (saved)
855 r0 (not saved; cannot be base reg)
856 r9 (not saved; best for TImode)
857 r11, r10, r8-r4 (not saved; highest used first to make less conflict)
858 r3 (not saved; return value register)
859 r31 - r13 (saved; order given to save least number)
860 r12 (not saved; if used for DImode or DFmode would use r13)
861 mq (not saved; best to use it if we can)
862 ctr (not saved; when we have the choice ctr is better)
864 cr5, r1, r2, ap, xer, vrsave, vscr (fixed)
865 spe_acc, spefscr (fixed)
868 v0 - v1 (not saved or used for anything)
869 v13 - v3 (not saved; incoming vector arg registers)
870 v2 (not saved; incoming vector arg reg; return value)
871 v19 - v14 (not saved or used for anything)
872 v31 - v20 (saved; order given to save least number)
876 #define MAYBE_R2_AVAILABLE
877 #define MAYBE_R2_FIXED 2,
879 #define MAYBE_R2_AVAILABLE 2,
880 #define MAYBE_R2_FIXED
883 #define REG_ALLOC_ORDER \
885 45, 44, 43, 42, 41, 40, 39, 38, 37, 36, 35, 34, \
887 63, 62, 61, 60, 59, 58, 57, 56, 55, 54, 53, 52, 51, \
888 50, 49, 48, 47, 46, \
889 75, 74, 69, 68, 72, 71, 70, \
890 0, MAYBE_R2_AVAILABLE \
891 9, 11, 10, 8, 7, 6, 5, 4, \
893 31, 30, 29, 28, 27, 26, 25, 24, 23, 22, 21, 20, 19, \
894 18, 17, 16, 15, 14, 13, 12, \
896 73, 1, MAYBE_R2_FIXED 67, 76, \
897 /* AltiVec registers. */ \
899 90, 89, 88, 87, 86, 85, 84, 83, 82, 81, 80, \
901 96, 95, 94, 93, 92, 91, \
902 108, 107, 106, 105, 104, 103, 102, 101, 100, 99, 98, \
907 /* True if register is floating-point. */
908 #define FP_REGNO_P(N) ((N) >= 32 && (N) <= 63)
910 /* True if register is a condition register. */
911 #define CR_REGNO_P(N) ((N) >= 68 && (N) <= 75)
913 /* True if register is a condition register, but not cr0. */
914 #define CR_REGNO_NOT_CR0_P(N) ((N) >= 69 && (N) <= 75)
916 /* True if register is an integer register. */
917 #define INT_REGNO_P(N) ((N) <= 31 || (N) == ARG_POINTER_REGNUM)
919 /* SPE SIMD registers are just the GPRs. */
920 #define SPE_SIMD_REGNO_P(N) ((N) <= 31)
922 /* True if register is the XER register. */
923 #define XER_REGNO_P(N) ((N) == XER_REGNO)
925 /* True if register is an AltiVec register. */
926 #define ALTIVEC_REGNO_P(N) ((N) >= FIRST_ALTIVEC_REGNO && (N) <= LAST_ALTIVEC_REGNO)
928 /* Return number of consecutive hard regs needed starting at reg REGNO
929 to hold something of mode MODE.
930 This is ordinarily the length in words of a value of mode MODE
931 but can be less for certain modes in special long registers.
933 For the SPE, GPRs are 64 bits but only 32 bits are visible in
934 scalar instructions. The upper 32 bits are only available to the
937 POWER and PowerPC GPRs hold 32 bits worth;
938 PowerPC64 GPRs and FPRs point register holds 64 bits worth. */
940 #define HARD_REGNO_NREGS(REGNO, MODE) \
941 (FP_REGNO_P (REGNO) \
942 ? ((GET_MODE_SIZE (MODE) + UNITS_PER_FP_WORD - 1) / UNITS_PER_FP_WORD) \
943 : (SPE_SIMD_REGNO_P (REGNO) && TARGET_SPE && SPE_VECTOR_MODE (MODE)) \
944 ? ((GET_MODE_SIZE (MODE) + UNITS_PER_SPE_WORD - 1) / UNITS_PER_SPE_WORD) \
945 : ALTIVEC_REGNO_P (REGNO) \
946 ? ((GET_MODE_SIZE (MODE) + UNITS_PER_ALTIVEC_WORD - 1) / UNITS_PER_ALTIVEC_WORD) \
947 : ((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD))
949 #define ALTIVEC_VECTOR_MODE(MODE) \
950 ((MODE) == V16QImode \
951 || (MODE) == V8HImode \
952 || (MODE) == V4SFmode \
953 || (MODE) == V4SImode)
955 #define SPE_VECTOR_MODE(MODE) \
956 ((MODE) == V4HImode \
957 || (MODE) == V2SFmode \
958 || (MODE) == V1DImode \
959 || (MODE) == V2SImode)
961 /* Define this macro to be nonzero if the port is prepared to handle
962 insns involving vector mode MODE. At the very least, it must have
963 move patterns for this mode. */
965 #define VECTOR_MODE_SUPPORTED_P(MODE) \
966 ((TARGET_SPE && SPE_VECTOR_MODE (MODE)) \
967 || (TARGET_ALTIVEC && ALTIVEC_VECTOR_MODE (MODE)))
969 /* Value is 1 if hard register REGNO can hold a value of machine-mode MODE.
970 For POWER and PowerPC, the GPRs can hold any mode, but values bigger
971 than one register cannot go past R31. The float
972 registers only can hold floating modes and DImode, and CR register only
973 can hold CC modes. We cannot put TImode anywhere except general
974 register and it must be able to fit within the register set. */
976 #define HARD_REGNO_MODE_OK(REGNO, MODE) \
977 (INT_REGNO_P (REGNO) ? \
978 INT_REGNO_P (REGNO + HARD_REGNO_NREGS (REGNO, MODE) - 1) \
979 : FP_REGNO_P (REGNO) ? \
980 (GET_MODE_CLASS (MODE) == MODE_FLOAT \
981 || (GET_MODE_CLASS (MODE) == MODE_INT \
982 && GET_MODE_SIZE (MODE) == UNITS_PER_FP_WORD)) \
983 : ALTIVEC_REGNO_P (REGNO) ? ALTIVEC_VECTOR_MODE (MODE) \
984 : SPE_SIMD_REGNO_P (REGNO) && TARGET_SPE && SPE_VECTOR_MODE (MODE) ? 1 \
985 : CR_REGNO_P (REGNO) ? GET_MODE_CLASS (MODE) == MODE_CC \
986 : XER_REGNO_P (REGNO) ? (MODE) == PSImode \
987 : GET_MODE_SIZE (MODE) <= UNITS_PER_WORD)
989 /* Value is 1 if it is a good idea to tie two pseudo registers
990 when one has mode MODE1 and one has mode MODE2.
991 If HARD_REGNO_MODE_OK could produce different values for MODE1 and MODE2,
992 for any hard reg, then this must be 0 for correct output. */
993 #define MODES_TIEABLE_P(MODE1, MODE2) \
994 (GET_MODE_CLASS (MODE1) == MODE_FLOAT \
995 ? GET_MODE_CLASS (MODE2) == MODE_FLOAT \
996 : GET_MODE_CLASS (MODE2) == MODE_FLOAT \
997 ? GET_MODE_CLASS (MODE1) == MODE_FLOAT \
998 : GET_MODE_CLASS (MODE1) == MODE_CC \
999 ? GET_MODE_CLASS (MODE2) == MODE_CC \
1000 : GET_MODE_CLASS (MODE2) == MODE_CC \
1001 ? GET_MODE_CLASS (MODE1) == MODE_CC \
1002 : SPE_VECTOR_MODE (MODE1) \
1003 ? SPE_VECTOR_MODE (MODE2) \
1004 : SPE_VECTOR_MODE (MODE2) \
1005 ? SPE_VECTOR_MODE (MODE1) \
1006 : ALTIVEC_VECTOR_MODE (MODE1) \
1007 ? ALTIVEC_VECTOR_MODE (MODE2) \
1008 : ALTIVEC_VECTOR_MODE (MODE2) \
1009 ? ALTIVEC_VECTOR_MODE (MODE1) \
1012 /* Post-reload, we can't use any new AltiVec registers, as we already
1013 emitted the vrsave mask. */
1015 #define HARD_REGNO_RENAME_OK(SRC, DST) \
1016 (! ALTIVEC_REGNO_P (DST) || regs_ever_live[DST])
1018 /* A C expression returning the cost of moving data from a register of class
1019 CLASS1 to one of CLASS2. */
1021 #define REGISTER_MOVE_COST rs6000_register_move_cost
1023 /* A C expressions returning the cost of moving data of MODE from a register to
1026 #define MEMORY_MOVE_COST rs6000_memory_move_cost
1028 /* Specify the cost of a branch insn; roughly the number of extra insns that
1029 should be added to avoid a branch.
1031 Set this to 3 on the RS/6000 since that is roughly the average cost of an
1032 unscheduled conditional branch. */
1034 #define BRANCH_COST 3
1036 /* Override BRANCH_COST heuristic which empirically produces worse
1037 performance for fold_range_test(). */
1039 #define RANGE_TEST_NON_SHORT_CIRCUIT 0
1041 /* A fixed register used at prologue and epilogue generation to fix
1042 addressing modes. The SPE needs heavy addressing fixes at the last
1043 minute, and it's best to save a register for it.
1045 AltiVec also needs fixes, but we've gotten around using r11, which
1046 is actually wrong because when use_backchain_to_restore_sp is true,
1047 we end up clobbering r11.
1049 The AltiVec case needs to be fixed. Dunno if we should break ABI
1050 compatibility and reserve a register for it as well.. */
1052 #define FIXED_SCRATCH (TARGET_SPE ? 14 : 11)
1054 /* Define this macro to change register usage conditional on target flags.
1055 Set MQ register fixed (already call_used) if not POWER architecture
1056 (RIOS1, RIOS2, RSC, and PPC601) so that it will not be allocated.
1057 64-bit AIX reserves GPR13 for thread-private data.
1058 Conditionally disable FPRs. */
1060 #define CONDITIONAL_REGISTER_USAGE \
1063 if (! TARGET_POWER) \
1064 fixed_regs[64] = 1; \
1066 fixed_regs[13] = call_used_regs[13] \
1067 = call_really_used_regs[13] = 1; \
1068 if (TARGET_SOFT_FLOAT || !TARGET_FPRS) \
1069 for (i = 32; i < 64; i++) \
1070 fixed_regs[i] = call_used_regs[i] \
1071 = call_really_used_regs[i] = 1; \
1072 if (DEFAULT_ABI == ABI_V4 \
1073 && PIC_OFFSET_TABLE_REGNUM != INVALID_REGNUM \
1075 fixed_regs[RS6000_PIC_OFFSET_TABLE_REGNUM] = 1; \
1076 if (DEFAULT_ABI == ABI_V4 \
1077 && PIC_OFFSET_TABLE_REGNUM != INVALID_REGNUM \
1079 fixed_regs[RS6000_PIC_OFFSET_TABLE_REGNUM] \
1080 = call_used_regs[RS6000_PIC_OFFSET_TABLE_REGNUM] \
1081 = call_really_used_regs[RS6000_PIC_OFFSET_TABLE_REGNUM] = 1; \
1082 if (DEFAULT_ABI == ABI_DARWIN \
1083 && PIC_OFFSET_TABLE_REGNUM != INVALID_REGNUM) \
1084 global_regs[RS6000_PIC_OFFSET_TABLE_REGNUM] \
1085 = fixed_regs[RS6000_PIC_OFFSET_TABLE_REGNUM] \
1086 = call_used_regs[RS6000_PIC_OFFSET_TABLE_REGNUM] \
1087 = call_really_used_regs[RS6000_PIC_OFFSET_TABLE_REGNUM] = 1; \
1088 if (TARGET_ALTIVEC) \
1089 global_regs[VSCR_REGNO] = 1; \
1092 global_regs[SPEFSCR_REGNO] = 1; \
1093 fixed_regs[FIXED_SCRATCH] \
1094 = call_used_regs[FIXED_SCRATCH] \
1095 = call_really_used_regs[FIXED_SCRATCH] = 1; \
1097 if (! TARGET_ALTIVEC) \
1099 for (i = FIRST_ALTIVEC_REGNO; i <= LAST_ALTIVEC_REGNO; ++i) \
1100 fixed_regs[i] = call_used_regs[i] = call_really_used_regs[i] = 1; \
1101 call_really_used_regs[VRSAVE_REGNO] = 1; \
1103 if (TARGET_ALTIVEC_ABI) \
1104 for (i = FIRST_ALTIVEC_REGNO; i < FIRST_ALTIVEC_REGNO + 20; ++i) \
1105 call_used_regs[i] = call_really_used_regs[i] = 1; \
1108 /* Specify the registers used for certain standard purposes.
1109 The values of these macros are register numbers. */
1111 /* RS/6000 pc isn't overloaded on a register that the compiler knows about. */
1112 /* #define PC_REGNUM */
1114 /* Register to use for pushing function arguments. */
1115 #define STACK_POINTER_REGNUM 1
1117 /* Base register for access to local variables of the function. */
1118 #define FRAME_POINTER_REGNUM 31
1120 /* Value should be nonzero if functions must have frame pointers.
1121 Zero means the frame pointer need not be set up (and parms
1122 may be accessed via the stack pointer) in functions that seem suitable.
1123 This is computed in `reload', in reload1.c. */
1124 #define FRAME_POINTER_REQUIRED 0
1126 /* Base register for access to arguments of the function. */
1127 #define ARG_POINTER_REGNUM 67
1129 /* Place to put static chain when calling a function that requires it. */
1130 #define STATIC_CHAIN_REGNUM 11
1132 /* Link register number. */
1133 #define LINK_REGISTER_REGNUM 65
1135 /* Count register number. */
1136 #define COUNT_REGISTER_REGNUM 66
1138 /* Place that structure value return address is placed.
1140 On the RS/6000, it is passed as an extra parameter. */
1141 #define STRUCT_VALUE 0
1143 /* Define the classes of registers for register constraints in the
1144 machine description. Also define ranges of constants.
1146 One of the classes must always be named ALL_REGS and include all hard regs.
1147 If there is more than one class, another class must be named NO_REGS
1148 and contain no registers.
1150 The name GENERAL_REGS must be the name of a class (or an alias for
1151 another name such as ALL_REGS). This is the class of registers
1152 that is allowed by "g" or "r" in a register constraint.
1153 Also, registers outside this class are allocated only when
1154 instructions express preferences for them.
1156 The classes must be numbered in nondecreasing order; that is,
1157 a larger-numbered class must never be contained completely
1158 in a smaller-numbered class.
1160 For any two classes, it is very desirable that there be another
1161 class that represents their union. */
1163 /* The RS/6000 has three types of registers, fixed-point, floating-point,
1164 and condition registers, plus three special registers, MQ, CTR, and the
1165 link register. AltiVec adds a vector register class.
1167 However, r0 is special in that it cannot be used as a base register.
1168 So make a class for registers valid as base registers.
1170 Also, cr0 is the only condition code register that can be used in
1171 arithmetic insns, so make a separate class for it. */
1199 #define N_REG_CLASSES (int) LIM_REG_CLASSES
1201 /* Give names of register classes as strings for dump file. */
1203 #define REG_CLASS_NAMES \
1214 "NON_SPECIAL_REGS", \
1218 "LINK_OR_CTR_REGS", \
1220 "SPEC_OR_GEN_REGS", \
1228 /* Define which registers fit in which classes.
1229 This is an initializer for a vector of HARD_REG_SET
1230 of length N_REG_CLASSES. */
1232 #define REG_CLASS_CONTENTS \
1234 { 0x00000000, 0x00000000, 0x00000000, 0x00000000 }, /* NO_REGS */ \
1235 { 0xfffffffe, 0x00000000, 0x00000008, 0x00000000 }, /* BASE_REGS */ \
1236 { 0xffffffff, 0x00000000, 0x00000008, 0x00000000 }, /* GENERAL_REGS */ \
1237 { 0x00000000, 0xffffffff, 0x00000000, 0x00000000 }, /* FLOAT_REGS */ \
1238 { 0x00000000, 0x00000000, 0xffffe000, 0x00001fff }, /* ALTIVEC_REGS */ \
1239 { 0x00000000, 0x00000000, 0x00000000, 0x00002000 }, /* VRSAVE_REGS */ \
1240 { 0x00000000, 0x00000000, 0x00000000, 0x00004000 }, /* VSCR_REGS */ \
1241 { 0x00000000, 0x00000000, 0x00000000, 0x00008000 }, /* SPE_ACC_REGS */ \
1242 { 0x00000000, 0x00000000, 0x00000000, 0x00010000 }, /* SPEFSCR_REGS */ \
1243 { 0xffffffff, 0xffffffff, 0x00000008, 0x00000000 }, /* NON_SPECIAL_REGS */ \
1244 { 0x00000000, 0x00000000, 0x00000001, 0x00000000 }, /* MQ_REGS */ \
1245 { 0x00000000, 0x00000000, 0x00000002, 0x00000000 }, /* LINK_REGS */ \
1246 { 0x00000000, 0x00000000, 0x00000004, 0x00000000 }, /* CTR_REGS */ \
1247 { 0x00000000, 0x00000000, 0x00000006, 0x00000000 }, /* LINK_OR_CTR_REGS */ \
1248 { 0x00000000, 0x00000000, 0x00000007, 0x00002000 }, /* SPECIAL_REGS */ \
1249 { 0xffffffff, 0x00000000, 0x0000000f, 0x00000000 }, /* SPEC_OR_GEN_REGS */ \
1250 { 0x00000000, 0x00000000, 0x00000010, 0x00000000 }, /* CR0_REGS */ \
1251 { 0x00000000, 0x00000000, 0x00000ff0, 0x00000000 }, /* CR_REGS */ \
1252 { 0xffffffff, 0x00000000, 0x0000efff, 0x00000000 }, /* NON_FLOAT_REGS */ \
1253 { 0x00000000, 0x00000000, 0x00001000, 0x00000000 }, /* XER_REGS */ \
1254 { 0xffffffff, 0xffffffff, 0xffffffff, 0x00003fff } /* ALL_REGS */ \
1257 /* The same information, inverted:
1258 Return the class number of the smallest class containing
1259 reg number REGNO. This could be a conditional expression
1260 or could index an array. */
1262 #define REGNO_REG_CLASS(REGNO) \
1263 ((REGNO) == 0 ? GENERAL_REGS \
1264 : (REGNO) < 32 ? BASE_REGS \
1265 : FP_REGNO_P (REGNO) ? FLOAT_REGS \
1266 : ALTIVEC_REGNO_P (REGNO) ? ALTIVEC_REGS \
1267 : (REGNO) == CR0_REGNO ? CR0_REGS \
1268 : CR_REGNO_P (REGNO) ? CR_REGS \
1269 : (REGNO) == MQ_REGNO ? MQ_REGS \
1270 : (REGNO) == LINK_REGISTER_REGNUM ? LINK_REGS \
1271 : (REGNO) == COUNT_REGISTER_REGNUM ? CTR_REGS \
1272 : (REGNO) == ARG_POINTER_REGNUM ? BASE_REGS \
1273 : (REGNO) == XER_REGNO ? XER_REGS \
1274 : (REGNO) == VRSAVE_REGNO ? VRSAVE_REGS \
1275 : (REGNO) == VSCR_REGNO ? VRSAVE_REGS \
1276 : (REGNO) == SPE_ACC_REGNO ? SPE_ACC_REGS \
1277 : (REGNO) == SPEFSCR_REGNO ? SPEFSCR_REGS \
1280 /* The class value for index registers, and the one for base regs. */
1281 #define INDEX_REG_CLASS GENERAL_REGS
1282 #define BASE_REG_CLASS BASE_REGS
1284 /* Get reg_class from a letter such as appears in the machine description. */
1286 #define REG_CLASS_FROM_LETTER(C) \
1287 ((C) == 'f' ? FLOAT_REGS \
1288 : (C) == 'b' ? BASE_REGS \
1289 : (C) == 'h' ? SPECIAL_REGS \
1290 : (C) == 'q' ? MQ_REGS \
1291 : (C) == 'c' ? CTR_REGS \
1292 : (C) == 'l' ? LINK_REGS \
1293 : (C) == 'v' ? ALTIVEC_REGS \
1294 : (C) == 'x' ? CR0_REGS \
1295 : (C) == 'y' ? CR_REGS \
1296 : (C) == 'z' ? XER_REGS \
1299 /* The letters I, J, K, L, M, N, and P in a register constraint string
1300 can be used to stand for particular ranges of immediate operands.
1301 This macro defines what the ranges are.
1302 C is the letter, and VALUE is a constant value.
1303 Return 1 if VALUE is in the range specified by C.
1305 `I' is a signed 16-bit constant
1306 `J' is a constant with only the high-order 16 bits nonzero
1307 `K' is a constant with only the low-order 16 bits nonzero
1308 `L' is a signed 16-bit constant shifted left 16 bits
1309 `M' is a constant that is greater than 31
1310 `N' is a positive constant that is an exact power of two
1311 `O' is the constant zero
1312 `P' is a constant whose negation is a signed 16-bit constant */
1314 #define CONST_OK_FOR_LETTER_P(VALUE, C) \
1315 ( (C) == 'I' ? (unsigned HOST_WIDE_INT) ((VALUE) + 0x8000) < 0x10000 \
1316 : (C) == 'J' ? ((VALUE) & (~ (unsigned HOST_WIDE_INT) 0xffff0000)) == 0 \
1317 : (C) == 'K' ? ((VALUE) & (~ (HOST_WIDE_INT) 0xffff)) == 0 \
1318 : (C) == 'L' ? (((VALUE) & 0xffff) == 0 \
1319 && ((VALUE) >> 31 == -1 || (VALUE) >> 31 == 0)) \
1320 : (C) == 'M' ? (VALUE) > 31 \
1321 : (C) == 'N' ? (VALUE) > 0 && exact_log2 (VALUE) >= 0 \
1322 : (C) == 'O' ? (VALUE) == 0 \
1323 : (C) == 'P' ? (unsigned HOST_WIDE_INT) ((- (VALUE)) + 0x8000) < 0x10000 \
1326 /* Similar, but for floating constants, and defining letters G and H.
1327 Here VALUE is the CONST_DOUBLE rtx itself.
1329 We flag for special constants when we can copy the constant into
1330 a general register in two insns for DF/DI and one insn for SF.
1332 'H' is used for DI/DF constants that take 3 insns. */
1334 #define CONST_DOUBLE_OK_FOR_LETTER_P(VALUE, C) \
1335 ( (C) == 'G' ? (num_insns_constant (VALUE, GET_MODE (VALUE)) \
1336 == ((GET_MODE (VALUE) == SFmode) ? 1 : 2)) \
1337 : (C) == 'H' ? (num_insns_constant (VALUE, GET_MODE (VALUE)) == 3) \
1340 /* Optional extra constraints for this machine.
1342 'Q' means that is a memory operand that is just an offset from a reg.
1343 'R' is for AIX TOC entries.
1344 'S' is a constant that can be placed into a 64-bit mask operand
1345 'T' is a constant that can be placed into a 32-bit mask operand
1346 'U' is for V.4 small data references.
1347 'W' is a vector constant that can be easily generated (no mem refs).
1348 't' is for AND masks that can be performed by two rldic{l,r} insns. */
1350 #define EXTRA_CONSTRAINT(OP, C) \
1351 ((C) == 'Q' ? GET_CODE (OP) == MEM && GET_CODE (XEXP (OP, 0)) == REG \
1352 : (C) == 'R' ? legitimate_constant_pool_address_p (OP) \
1353 : (C) == 'S' ? mask64_operand (OP, DImode) \
1354 : (C) == 'T' ? mask_operand (OP, SImode) \
1355 : (C) == 'U' ? (DEFAULT_ABI == ABI_V4 \
1356 && small_data_operand (OP, GET_MODE (OP))) \
1357 : (C) == 't' ? (mask64_2_operand (OP, DImode) \
1358 && (fixed_regs[CR0_REGNO] \
1359 || !logical_operand (OP, DImode)) \
1360 && !mask64_operand (OP, DImode)) \
1361 : (C) == 'W' ? (easy_vector_constant (OP, GET_MODE (OP))) \
1364 /* Given an rtx X being reloaded into a reg required to be
1365 in class CLASS, return the class of reg to actually use.
1366 In general this is just CLASS; but on some machines
1367 in some cases it is preferable to use a more restrictive class.
1369 On the RS/6000, we have to return NO_REGS when we want to reload a
1370 floating-point CONST_DOUBLE to force it to be copied to memory.
1372 We also don't want to reload integer values into floating-point
1373 registers if we can at all help it. In fact, this can
1374 cause reload to abort, if it tries to generate a reload of CTR
1375 into a FP register and discovers it doesn't have the memory location
1378 ??? Would it be a good idea to have reload do the converse, that is
1379 try to reload floating modes into FP registers if possible?
1382 #define PREFERRED_RELOAD_CLASS(X,CLASS) \
1383 (((GET_CODE (X) == CONST_DOUBLE \
1384 && GET_MODE_CLASS (GET_MODE (X)) == MODE_FLOAT) \
1386 : (GET_MODE_CLASS (GET_MODE (X)) == MODE_INT \
1387 && (CLASS) == NON_SPECIAL_REGS) \
1391 /* Return the register class of a scratch register needed to copy IN into
1392 or out of a register in CLASS in MODE. If it can be done directly,
1393 NO_REGS is returned. */
1395 #define SECONDARY_RELOAD_CLASS(CLASS,MODE,IN) \
1396 secondary_reload_class (CLASS, MODE, IN)
1398 /* If we are copying between FP or AltiVec registers and anything
1399 else, we need a memory location. */
1401 #define SECONDARY_MEMORY_NEEDED(CLASS1,CLASS2,MODE) \
1402 ((CLASS1) != (CLASS2) && ((CLASS1) == FLOAT_REGS \
1403 || (CLASS2) == FLOAT_REGS \
1404 || (CLASS1) == ALTIVEC_REGS \
1405 || (CLASS2) == ALTIVEC_REGS))
1407 /* Return the maximum number of consecutive registers
1408 needed to represent mode MODE in a register of class CLASS.
1410 On RS/6000, this is the size of MODE in words,
1411 except in the FP regs, where a single reg is enough for two words. */
1412 #define CLASS_MAX_NREGS(CLASS, MODE) \
1413 (((CLASS) == FLOAT_REGS) \
1414 ? ((GET_MODE_SIZE (MODE) + UNITS_PER_FP_WORD - 1) / UNITS_PER_FP_WORD) \
1415 : ((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD))
1418 /* Return a class of registers that cannot change FROM mode to TO mode. */
1420 #define CANNOT_CHANGE_MODE_CLASS(FROM, TO, CLASS) \
1421 (GET_MODE_SIZE (FROM) != GET_MODE_SIZE (TO) \
1422 ? reg_classes_intersect_p (FLOAT_REGS, CLASS) \
1423 : (TARGET_SPE && (SPE_VECTOR_MODE (FROM) + SPE_VECTOR_MODE (TO)) == 1) \
1424 ? reg_classes_intersect_p (GENERAL_REGS, CLASS) \
1427 /* Stack layout; function entry, exit and calling. */
1429 /* Enumeration to give which calling sequence to use. */
1432 ABI_AIX, /* IBM's AIX */
1433 ABI_V4, /* System V.4/eabi */
1434 ABI_DARWIN /* Apple's Darwin (OS X kernel) */
1437 extern enum rs6000_abi rs6000_current_abi; /* available for use by subtarget */
1439 /* Structure used to define the rs6000 stack */
1440 typedef struct rs6000_stack {
1441 int first_gp_reg_save; /* first callee saved GP register used */
1442 int first_fp_reg_save; /* first callee saved FP register used */
1443 int first_altivec_reg_save; /* first callee saved AltiVec register used */
1444 int lr_save_p; /* true if the link reg needs to be saved */
1445 int cr_save_p; /* true if the CR reg needs to be saved */
1446 unsigned int vrsave_mask; /* mask of vec registers to save */
1447 int toc_save_p; /* true if the TOC needs to be saved */
1448 int push_p; /* true if we need to allocate stack space */
1449 int calls_p; /* true if the function makes any calls */
1450 enum rs6000_abi abi; /* which ABI to use */
1451 int gp_save_offset; /* offset to save GP regs from initial SP */
1452 int fp_save_offset; /* offset to save FP regs from initial SP */
1453 int altivec_save_offset; /* offset to save AltiVec regs from initial SP */
1454 int lr_save_offset; /* offset to save LR from initial SP */
1455 int cr_save_offset; /* offset to save CR from initial SP */
1456 int vrsave_save_offset; /* offset to save VRSAVE from initial SP */
1457 int spe_gp_save_offset; /* offset to save spe 64-bit gprs */
1458 int toc_save_offset; /* offset to save the TOC pointer */
1459 int varargs_save_offset; /* offset to save the varargs registers */
1460 int ehrd_offset; /* offset to EH return data */
1461 int reg_size; /* register size (4 or 8) */
1462 int varargs_size; /* size to hold V.4 args passed in regs */
1463 int vars_size; /* variable save area size */
1464 int parm_size; /* outgoing parameter size */
1465 int save_size; /* save area size */
1466 int fixed_size; /* fixed size of stack frame */
1467 int gp_size; /* size of saved GP registers */
1468 int fp_size; /* size of saved FP registers */
1469 int altivec_size; /* size of saved AltiVec registers */
1470 int cr_size; /* size to hold CR if not in save_size */
1471 int lr_size; /* size to hold LR if not in save_size */
1472 int vrsave_size; /* size to hold VRSAVE if not in save_size */
1473 int altivec_padding_size; /* size of altivec alignment padding if
1475 int spe_gp_size; /* size of 64-bit GPR save size for SPE */
1476 int spe_padding_size;
1477 int toc_size; /* size to hold TOC if not in save_size */
1478 int total_size; /* total bytes allocated for stack */
1479 int spe_64bit_regs_used;
1482 /* Define this if pushing a word on the stack
1483 makes the stack pointer a smaller address. */
1484 #define STACK_GROWS_DOWNWARD
1486 /* Define this if the nominal address of the stack frame
1487 is at the high-address end of the local variables;
1488 that is, each additional local variable allocated
1489 goes at a more negative offset in the frame.
1491 On the RS/6000, we grow upwards, from the area after the outgoing
1493 /* #define FRAME_GROWS_DOWNWARD */
1495 /* Size of the outgoing register save area */
1496 #define RS6000_REG_SAVE ((DEFAULT_ABI == ABI_AIX \
1497 || DEFAULT_ABI == ABI_DARWIN) \
1498 ? (TARGET_64BIT ? 64 : 32) \
1501 /* Size of the fixed area on the stack */
1502 #define RS6000_SAVE_AREA \
1503 (((DEFAULT_ABI == ABI_AIX || DEFAULT_ABI == ABI_DARWIN) ? 24 : 8) \
1504 << (TARGET_64BIT ? 1 : 0))
1506 /* MEM representing address to save the TOC register */
1507 #define RS6000_SAVE_TOC gen_rtx_MEM (Pmode, \
1508 plus_constant (stack_pointer_rtx, \
1509 (TARGET_32BIT ? 20 : 40)))
1511 /* Size of the V.4 varargs area if needed */
1512 #define RS6000_VARARGS_AREA 0
1514 /* Align an address */
1515 #define RS6000_ALIGN(n,a) (((n) + (a) - 1) & ~((a) - 1))
1517 /* Size of V.4 varargs area in bytes */
1518 #define RS6000_VARARGS_SIZE \
1519 ((GP_ARG_NUM_REG * (TARGET_32BIT ? 4 : 8)) + (FP_ARG_NUM_REG * 8) + 8)
1521 /* Offset within stack frame to start allocating local variables at.
1522 If FRAME_GROWS_DOWNWARD, this is the offset to the END of the
1523 first local allocated. Otherwise, it is the offset to the BEGINNING
1524 of the first local allocated.
1526 On the RS/6000, the frame pointer is the same as the stack pointer,
1527 except for dynamic allocations. So we start after the fixed area and
1528 outgoing parameter area. */
1530 #define STARTING_FRAME_OFFSET \
1531 (RS6000_ALIGN (current_function_outgoing_args_size, \
1532 TARGET_ALTIVEC ? 16 : 8) \
1533 + RS6000_VARARGS_AREA \
1536 /* Offset from the stack pointer register to an item dynamically
1537 allocated on the stack, e.g., by `alloca'.
1539 The default value for this macro is `STACK_POINTER_OFFSET' plus the
1540 length of the outgoing arguments. The default is correct for most
1541 machines. See `function.c' for details. */
1542 #define STACK_DYNAMIC_OFFSET(FUNDECL) \
1543 (RS6000_ALIGN (current_function_outgoing_args_size, \
1544 TARGET_ALTIVEC ? 16 : 8) \
1545 + (STACK_POINTER_OFFSET))
1547 /* If we generate an insn to push BYTES bytes,
1548 this says how many the stack pointer really advances by.
1549 On RS/6000, don't define this because there are no push insns. */
1550 /* #define PUSH_ROUNDING(BYTES) */
1552 /* Offset of first parameter from the argument pointer register value.
1553 On the RS/6000, we define the argument pointer to the start of the fixed
1555 #define FIRST_PARM_OFFSET(FNDECL) RS6000_SAVE_AREA
1557 /* Offset from the argument pointer register value to the top of
1558 stack. This is different from FIRST_PARM_OFFSET because of the
1559 register save area. */
1560 #define ARG_POINTER_CFA_OFFSET(FNDECL) 0
1562 /* Define this if stack space is still allocated for a parameter passed
1563 in a register. The value is the number of bytes allocated to this
1565 #define REG_PARM_STACK_SPACE(FNDECL) RS6000_REG_SAVE
1567 /* Define this if the above stack space is to be considered part of the
1568 space allocated by the caller. */
1569 #define OUTGOING_REG_PARM_STACK_SPACE
1571 /* This is the difference between the logical top of stack and the actual sp.
1573 For the RS/6000, sp points past the fixed area. */
1574 #define STACK_POINTER_OFFSET RS6000_SAVE_AREA
1576 /* Define this if the maximum size of all the outgoing args is to be
1577 accumulated and pushed during the prologue. The amount can be
1578 found in the variable current_function_outgoing_args_size. */
1579 #define ACCUMULATE_OUTGOING_ARGS 1
1581 /* Value is the number of bytes of arguments automatically
1582 popped when returning from a subroutine call.
1583 FUNDECL is the declaration node of the function (as a tree),
1584 FUNTYPE is the data type of the function (as a tree),
1585 or for a library call it is an identifier node for the subroutine name.
1586 SIZE is the number of bytes of arguments passed on the stack. */
1588 #define RETURN_POPS_ARGS(FUNDECL,FUNTYPE,SIZE) 0
1590 /* Define how to find the value returned by a function.
1591 VALTYPE is the data type of the value (as a tree).
1592 If the precise function being called is known, FUNC is its FUNCTION_DECL;
1593 otherwise, FUNC is 0. */
1595 #define FUNCTION_VALUE(VALTYPE, FUNC) rs6000_function_value ((VALTYPE), (FUNC))
1597 /* Define how to find the value returned by a library function
1598 assuming the value has mode MODE. */
1600 #define LIBCALL_VALUE(MODE) rs6000_libcall_value ((MODE))
1602 /* The AIX ABI for the RS/6000 specifies that all structures are
1603 returned in memory. The Darwin ABI does the same. The SVR4 ABI
1604 specifies that structures <= 8 bytes are returned in r3/r4, but a
1605 draft put them in memory, and GCC used to implement the draft
1606 instead of the final standard. Therefore, TARGET_AIX_STRUCT_RET
1607 controls this instead of DEFAULT_ABI; V.4 targets needing backward
1608 compatibility can change DRAFT_V4_STRUCT_RET to override the
1609 default, and -m switches get the final word. See
1610 rs6000_override_options for more details.
1612 The PPC32 SVR4 ABI uses IEEE double extended for long double, if 128-bit
1613 long double support is enabled. These values are returned in memory.
1615 int_size_in_bytes returns -1 for variable size objects, which go in
1616 memory always. The cast to unsigned makes -1 > 8. */
1618 #define RETURN_IN_MEMORY(TYPE) \
1619 ((AGGREGATE_TYPE_P (TYPE) \
1620 && (TARGET_AIX_STRUCT_RET \
1621 || (unsigned HOST_WIDE_INT) int_size_in_bytes (TYPE) > 8)) \
1622 || (DEFAULT_ABI == ABI_V4 && TYPE_MODE (TYPE) == TFmode))
1624 /* DRAFT_V4_STRUCT_RET defaults off. */
1625 #define DRAFT_V4_STRUCT_RET 0
1627 /* Let RETURN_IN_MEMORY control what happens. */
1628 #define DEFAULT_PCC_STRUCT_RETURN 0
1630 /* Mode of stack savearea.
1631 FUNCTION is VOIDmode because calling convention maintains SP.
1632 BLOCK needs Pmode for SP.
1633 NONLOCAL needs twice Pmode to maintain both backchain and SP. */
1634 #define STACK_SAVEAREA_MODE(LEVEL) \
1635 (LEVEL == SAVE_FUNCTION ? VOIDmode \
1636 : LEVEL == SAVE_NONLOCAL ? (TARGET_32BIT ? DImode : TImode) : Pmode)
1638 /* Minimum and maximum general purpose registers used to hold arguments. */
1639 #define GP_ARG_MIN_REG 3
1640 #define GP_ARG_MAX_REG 10
1641 #define GP_ARG_NUM_REG (GP_ARG_MAX_REG - GP_ARG_MIN_REG + 1)
1643 /* Minimum and maximum floating point registers used to hold arguments. */
1644 #define FP_ARG_MIN_REG 33
1645 #define FP_ARG_AIX_MAX_REG 45
1646 #define FP_ARG_V4_MAX_REG 40
1647 #define FP_ARG_MAX_REG ((DEFAULT_ABI == ABI_AIX \
1648 || DEFAULT_ABI == ABI_DARWIN) \
1649 ? FP_ARG_AIX_MAX_REG : FP_ARG_V4_MAX_REG)
1650 #define FP_ARG_NUM_REG (FP_ARG_MAX_REG - FP_ARG_MIN_REG + 1)
1652 /* Minimum and maximum AltiVec registers used to hold arguments. */
1653 #define ALTIVEC_ARG_MIN_REG (FIRST_ALTIVEC_REGNO + 2)
1654 #define ALTIVEC_ARG_MAX_REG (ALTIVEC_ARG_MIN_REG + 11)
1655 #define ALTIVEC_ARG_NUM_REG (ALTIVEC_ARG_MAX_REG - ALTIVEC_ARG_MIN_REG + 1)
1657 /* Return registers */
1658 #define GP_ARG_RETURN GP_ARG_MIN_REG
1659 #define FP_ARG_RETURN FP_ARG_MIN_REG
1660 #define ALTIVEC_ARG_RETURN (FIRST_ALTIVEC_REGNO + 2)
1662 /* Flags for the call/call_value rtl operations set up by function_arg */
1663 #define CALL_NORMAL 0x00000000 /* no special processing */
1664 /* Bits in 0x00000001 are unused. */
1665 #define CALL_V4_CLEAR_FP_ARGS 0x00000002 /* V.4, no FP args passed */
1666 #define CALL_V4_SET_FP_ARGS 0x00000004 /* V.4, FP args were passed */
1667 #define CALL_LONG 0x00000008 /* always call indirect */
1669 /* 1 if N is a possible register number for a function value
1670 as seen by the caller.
1672 On RS/6000, this is r3, fp1, and v2 (for AltiVec). */
1673 #define FUNCTION_VALUE_REGNO_P(N) \
1674 ((N) == GP_ARG_RETURN \
1675 || ((N) == FP_ARG_RETURN && TARGET_HARD_FLOAT) \
1676 || ((N) == ALTIVEC_ARG_RETURN && TARGET_ALTIVEC))
1678 /* 1 if N is a possible register number for function argument passing.
1679 On RS/6000, these are r3-r10 and fp1-fp13.
1680 On AltiVec, v2 - v13 are used for passing vectors. */
1681 #define FUNCTION_ARG_REGNO_P(N) \
1682 ((unsigned) (N) - GP_ARG_MIN_REG < GP_ARG_NUM_REG \
1683 || ((unsigned) (N) - ALTIVEC_ARG_MIN_REG < ALTIVEC_ARG_NUM_REG \
1684 && TARGET_ALTIVEC) \
1685 || ((unsigned) (N) - FP_ARG_MIN_REG < FP_ARG_NUM_REG \
1686 && TARGET_HARD_FLOAT))
1688 /* A C structure for machine-specific, per-function data.
1689 This is added to the cfun structure. */
1690 typedef struct machine_function GTY(())
1692 /* Whether a System V.4 varargs area was created. */
1694 /* Flags if __builtin_return_address (n) with n >= 1 was used. */
1695 int ra_needs_full_frame;
1696 /* Some local-dynamic symbol. */
1697 const char *some_ld_name;
1698 /* Whether the instruction chain has been scanned already. */
1699 int insn_chain_scanned_p;
1702 /* Define a data type for recording info about an argument list
1703 during the scan of that argument list. This data type should
1704 hold all necessary information about the function itself
1705 and about the args processed so far, enough to enable macros
1706 such as FUNCTION_ARG to determine where the next arg should go.
1708 On the RS/6000, this is a structure. The first element is the number of
1709 total argument words, the second is used to store the next
1710 floating-point register number, and the third says how many more args we
1711 have prototype types for.
1713 For ABI_V4, we treat these slightly differently -- `sysv_gregno' is
1714 the next available GP register, `fregno' is the next available FP
1715 register, and `words' is the number of words used on the stack.
1717 The varargs/stdarg support requires that this structure's size
1718 be a multiple of sizeof(int). */
1720 typedef struct rs6000_args
1722 int words; /* # words used for passing GP registers */
1723 int fregno; /* next available FP register */
1724 int vregno; /* next available AltiVec register */
1725 int nargs_prototype; /* # args left in the current prototype */
1726 int orig_nargs; /* Original value of nargs_prototype */
1727 int prototype; /* Whether a prototype was defined */
1728 int stdarg; /* Whether function is a stdarg function. */
1729 int call_cookie; /* Do special things for this call */
1730 int sysv_gregno; /* next available GP register */
1733 /* Define intermediate macro to compute the size (in registers) of an argument
1736 #define RS6000_ARG_SIZE(MODE, TYPE) \
1737 ((MODE) != BLKmode \
1738 ? (GET_MODE_SIZE (MODE) + (UNITS_PER_WORD - 1)) / UNITS_PER_WORD \
1739 : (int_size_in_bytes (TYPE) + (UNITS_PER_WORD - 1)) / UNITS_PER_WORD)
1741 /* Initialize a variable CUM of type CUMULATIVE_ARGS
1742 for a call to a function whose data type is FNTYPE.
1743 For a library call, FNTYPE is 0. */
1745 #define INIT_CUMULATIVE_ARGS(CUM,FNTYPE,LIBNAME,INDIRECT) \
1746 init_cumulative_args (&CUM, FNTYPE, LIBNAME, FALSE)
1748 /* Similar, but when scanning the definition of a procedure. We always
1749 set NARGS_PROTOTYPE large so we never return an EXPR_LIST. */
1751 #define INIT_CUMULATIVE_INCOMING_ARGS(CUM,FNTYPE,LIBNAME) \
1752 init_cumulative_args (&CUM, FNTYPE, LIBNAME, TRUE)
1754 /* Update the data in CUM to advance over an argument
1755 of mode MODE and data type TYPE.
1756 (TYPE is null for libcalls where that information may not be available.) */
1758 #define FUNCTION_ARG_ADVANCE(CUM, MODE, TYPE, NAMED) \
1759 function_arg_advance (&CUM, MODE, TYPE, NAMED)
1761 /* Nonzero if we can use a floating-point register to pass this arg. */
1762 #define USE_FP_FOR_ARG_P(CUM,MODE,TYPE) \
1763 (GET_MODE_CLASS (MODE) == MODE_FLOAT \
1764 && (CUM).fregno <= FP_ARG_MAX_REG \
1765 && TARGET_HARD_FLOAT && TARGET_FPRS)
1767 /* Nonzero if we can use an AltiVec register to pass this arg. */
1768 #define USE_ALTIVEC_FOR_ARG_P(CUM,MODE,TYPE) \
1769 (ALTIVEC_VECTOR_MODE (MODE) \
1770 && (CUM).vregno <= ALTIVEC_ARG_MAX_REG \
1771 && TARGET_ALTIVEC_ABI)
1773 /* Determine where to put an argument to a function.
1774 Value is zero to push the argument on the stack,
1775 or a hard register in which to store the argument.
1777 MODE is the argument's machine mode.
1778 TYPE is the data type of the argument (as a tree).
1779 This is null for libcalls where that information may
1781 CUM is a variable of type CUMULATIVE_ARGS which gives info about
1782 the preceding args and about the function being called.
1783 NAMED is nonzero if this argument is a named parameter
1784 (otherwise it is an extra parameter matching an ellipsis).
1786 On RS/6000 the first eight words of non-FP are normally in registers
1787 and the rest are pushed. The first 13 FP args are in registers.
1789 If this is floating-point and no prototype is specified, we use
1790 both an FP and integer register (or possibly FP reg and stack). Library
1791 functions (when TYPE is zero) always have the proper types for args,
1792 so we can pass the FP value just in one register. emit_library_function
1793 doesn't support EXPR_LIST anyway. */
1795 #define FUNCTION_ARG(CUM, MODE, TYPE, NAMED) \
1796 function_arg (&CUM, MODE, TYPE, NAMED)
1798 /* For an arg passed partly in registers and partly in memory,
1799 this is the number of registers used.
1800 For args passed entirely in registers or entirely in memory, zero. */
1802 #define FUNCTION_ARG_PARTIAL_NREGS(CUM, MODE, TYPE, NAMED) \
1803 function_arg_partial_nregs (&CUM, MODE, TYPE, NAMED)
1805 /* A C expression that indicates when an argument must be passed by
1806 reference. If nonzero for an argument, a copy of that argument is
1807 made in memory and a pointer to the argument is passed instead of
1808 the argument itself. The pointer is passed in whatever way is
1809 appropriate for passing a pointer to that type. */
1811 #define FUNCTION_ARG_PASS_BY_REFERENCE(CUM, MODE, TYPE, NAMED) \
1812 function_arg_pass_by_reference(&CUM, MODE, TYPE, NAMED)
1814 /* If defined, a C expression which determines whether, and in which
1815 direction, to pad out an argument with extra space. The value
1816 should be of type `enum direction': either `upward' to pad above
1817 the argument, `downward' to pad below, or `none' to inhibit
1820 #define FUNCTION_ARG_PADDING(MODE, TYPE) function_arg_padding (MODE, TYPE)
1822 /* If defined, a C expression that gives the alignment boundary, in bits,
1823 of an argument with the specified mode and type. If it is not defined,
1824 PARM_BOUNDARY is used for all arguments. */
1826 #define FUNCTION_ARG_BOUNDARY(MODE, TYPE) \
1827 function_arg_boundary (MODE, TYPE)
1829 /* Define to nonzero if complex arguments should be split into their
1830 corresponding components.
1832 This should be set for Linux and Darwin as well, but we can't break
1833 the ABIs at the moment. For now, only AIX gets fixed. */
1834 #define SPLIT_COMPLEX_ARGS (DEFAULT_ABI == ABI_AIX)
1836 /* Perform any needed actions needed for a function that is receiving a
1837 variable number of arguments.
1841 MODE and TYPE are the mode and type of the current parameter.
1843 PRETEND_SIZE is a variable that should be set to the amount of stack
1844 that must be pushed by the prolog to pretend that our caller pushed
1847 Normally, this macro will push all remaining incoming registers on the
1848 stack and set PRETEND_SIZE to the length of the registers pushed. */
1850 #define SETUP_INCOMING_VARARGS(CUM,MODE,TYPE,PRETEND_SIZE,NO_RTL) \
1851 setup_incoming_varargs (&CUM, MODE, TYPE, &PRETEND_SIZE, NO_RTL)
1853 /* Define the `__builtin_va_list' type for the ABI. */
1854 #define BUILD_VA_LIST_TYPE(VALIST) \
1855 (VALIST) = rs6000_build_va_list ()
1857 /* Implement `va_start' for varargs and stdarg. */
1858 #define EXPAND_BUILTIN_VA_START(valist, nextarg) \
1859 rs6000_va_start (valist, nextarg)
1861 /* Implement `va_arg'. */
1862 #define EXPAND_BUILTIN_VA_ARG(valist, type) \
1863 rs6000_va_arg (valist, type)
1865 /* For AIX, the rule is that structures are passed left-aligned in
1866 their stack slot. However, GCC does not presently do this:
1867 structures which are the same size as integer types are passed
1868 right-aligned, as if they were in fact integers. This only
1869 matters for structures of size 1 or 2, or 4 when TARGET_64BIT.
1870 ABI_V4 does not use std_expand_builtin_va_arg. */
1871 #define PAD_VARARGS_DOWN (TYPE_MODE (type) != BLKmode)
1873 /* Define this macro to be a nonzero value if the location where a function
1874 argument is passed depends on whether or not it is a named argument. */
1875 #define STRICT_ARGUMENT_NAMING 1
1877 /* Output assembler code to FILE to increment profiler label # LABELNO
1878 for profiling a function entry. */
1880 #define FUNCTION_PROFILER(FILE, LABELNO) \
1881 output_function_profiler ((FILE), (LABELNO));
1883 /* EXIT_IGNORE_STACK should be nonzero if, when returning from a function,
1884 the stack pointer does not matter. No definition is equivalent to
1887 On the RS/6000, this is nonzero because we can restore the stack from
1888 its backpointer, which we maintain. */
1889 #define EXIT_IGNORE_STACK 1
1891 /* Define this macro as a C expression that is nonzero for registers
1892 that are used by the epilogue or the return' pattern. The stack
1893 and frame pointer registers are already be assumed to be used as
1896 #define EPILOGUE_USES(REGNO) \
1897 ((reload_completed && (REGNO) == LINK_REGISTER_REGNUM) \
1898 || (TARGET_ALTIVEC && (REGNO) == VRSAVE_REGNO) \
1899 || (current_function_calls_eh_return \
1904 /* TRAMPOLINE_TEMPLATE deleted */
1906 /* Length in units of the trampoline for entering a nested function. */
1908 #define TRAMPOLINE_SIZE rs6000_trampoline_size ()
1910 /* Emit RTL insns to initialize the variable parts of a trampoline.
1911 FNADDR is an RTX for the address of the function's pure code.
1912 CXT is an RTX for the static chain value for the function. */
1914 #define INITIALIZE_TRAMPOLINE(ADDR, FNADDR, CXT) \
1915 rs6000_initialize_trampoline (ADDR, FNADDR, CXT)
1917 /* Definitions for __builtin_return_address and __builtin_frame_address.
1918 __builtin_return_address (0) should give link register (65), enable
1920 /* This should be uncommented, so that the link register is used, but
1921 currently this would result in unmatched insns and spilling fixed
1922 registers so we'll leave it for another day. When these problems are
1923 taken care of one additional fetch will be necessary in RETURN_ADDR_RTX.
1925 /* #define RETURN_ADDR_IN_PREVIOUS_FRAME */
1927 /* Number of bytes into the frame return addresses can be found. See
1928 rs6000_stack_info in rs6000.c for more information on how the different
1929 abi's store the return address. */
1930 #define RETURN_ADDRESS_OFFSET \
1931 ((DEFAULT_ABI == ABI_AIX \
1932 || DEFAULT_ABI == ABI_DARWIN) ? (TARGET_32BIT ? 8 : 16) : \
1933 (DEFAULT_ABI == ABI_V4) ? 4 : \
1934 (internal_error ("RETURN_ADDRESS_OFFSET not supported"), 0))
1936 /* The current return address is in link register (65). The return address
1937 of anything farther back is accessed normally at an offset of 8 from the
1939 #define RETURN_ADDR_RTX(COUNT, FRAME) \
1940 (rs6000_return_addr (COUNT, FRAME))
1943 /* Definitions for register eliminations.
1945 We have two registers that can be eliminated on the RS/6000. First, the
1946 frame pointer register can often be eliminated in favor of the stack
1947 pointer register. Secondly, the argument pointer register can always be
1948 eliminated; it is replaced with either the stack or frame pointer.
1950 In addition, we use the elimination mechanism to see if r30 is needed
1951 Initially we assume that it isn't. If it is, we spill it. This is done
1952 by making it an eliminable register. We replace it with itself so that
1953 if it isn't needed, then existing uses won't be modified. */
1955 /* This is an array of structures. Each structure initializes one pair
1956 of eliminable registers. The "from" register number is given first,
1957 followed by "to". Eliminations of the same "from" register are listed
1958 in order of preference. */
1959 #define ELIMINABLE_REGS \
1960 {{ FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM}, \
1961 { ARG_POINTER_REGNUM, STACK_POINTER_REGNUM}, \
1962 { ARG_POINTER_REGNUM, FRAME_POINTER_REGNUM}, \
1963 { RS6000_PIC_OFFSET_TABLE_REGNUM, RS6000_PIC_OFFSET_TABLE_REGNUM } }
1965 /* Given FROM and TO register numbers, say whether this elimination is allowed.
1966 Frame pointer elimination is automatically handled.
1968 For the RS/6000, if frame pointer elimination is being done, we would like
1969 to convert ap into fp, not sp.
1971 We need r30 if -mminimal-toc was specified, and there are constant pool
1974 #define CAN_ELIMINATE(FROM, TO) \
1975 ((FROM) == ARG_POINTER_REGNUM && (TO) == STACK_POINTER_REGNUM \
1976 ? ! frame_pointer_needed \
1977 : (FROM) == RS6000_PIC_OFFSET_TABLE_REGNUM \
1978 ? ! TARGET_MINIMAL_TOC || TARGET_NO_TOC || get_pool_size () == 0 \
1981 /* Define the offset between two registers, one to be eliminated, and the other
1982 its replacement, at the start of a routine. */
1983 #define INITIAL_ELIMINATION_OFFSET(FROM, TO, OFFSET) \
1985 rs6000_stack_t *info = rs6000_stack_info (); \
1987 if ((FROM) == FRAME_POINTER_REGNUM && (TO) == STACK_POINTER_REGNUM) \
1988 (OFFSET) = (info->push_p) ? 0 : - info->total_size; \
1989 else if ((FROM) == ARG_POINTER_REGNUM && (TO) == FRAME_POINTER_REGNUM) \
1990 (OFFSET) = info->total_size; \
1991 else if ((FROM) == ARG_POINTER_REGNUM && (TO) == STACK_POINTER_REGNUM) \
1992 (OFFSET) = (info->push_p) ? info->total_size : 0; \
1993 else if ((FROM) == RS6000_PIC_OFFSET_TABLE_REGNUM) \
1999 /* Addressing modes, and classification of registers for them. */
2001 #define HAVE_PRE_DECREMENT 1
2002 #define HAVE_PRE_INCREMENT 1
2004 /* Macros to check register numbers against specific register classes. */
2006 /* These assume that REGNO is a hard or pseudo reg number.
2007 They give nonzero only if REGNO is a hard reg of the suitable class
2008 or a pseudo reg currently allocated to a suitable hard reg.
2009 Since they use reg_renumber, they are safe only once reg_renumber
2010 has been allocated, which happens in local-alloc.c. */
2012 #define REGNO_OK_FOR_INDEX_P(REGNO) \
2013 ((REGNO) < FIRST_PSEUDO_REGISTER \
2014 ? (REGNO) <= 31 || (REGNO) == 67 \
2015 : (reg_renumber[REGNO] >= 0 \
2016 && (reg_renumber[REGNO] <= 31 || reg_renumber[REGNO] == 67)))
2018 #define REGNO_OK_FOR_BASE_P(REGNO) \
2019 ((REGNO) < FIRST_PSEUDO_REGISTER \
2020 ? ((REGNO) > 0 && (REGNO) <= 31) || (REGNO) == 67 \
2021 : (reg_renumber[REGNO] > 0 \
2022 && (reg_renumber[REGNO] <= 31 || reg_renumber[REGNO] == 67)))
2024 /* Maximum number of registers that can appear in a valid memory address. */
2026 #define MAX_REGS_PER_ADDRESS 2
2028 /* Recognize any constant value that is a valid address. */
2030 #define CONSTANT_ADDRESS_P(X) \
2031 (GET_CODE (X) == LABEL_REF || GET_CODE (X) == SYMBOL_REF \
2032 || GET_CODE (X) == CONST_INT || GET_CODE (X) == CONST \
2033 || GET_CODE (X) == HIGH)
2035 /* Nonzero if the constant value X is a legitimate general operand.
2036 It is given that X satisfies CONSTANT_P or is a CONST_DOUBLE.
2038 On the RS/6000, all integer constants are acceptable, most won't be valid
2039 for particular insns, though. Only easy FP constants are
2042 #define LEGITIMATE_CONSTANT_P(X) \
2043 ((GET_CODE (X) != CONST_DOUBLE || GET_MODE (X) == VOIDmode \
2044 || (TARGET_POWERPC64 && GET_MODE (X) == DImode) \
2045 || easy_fp_constant (X, GET_MODE (X))) \
2046 && !rs6000_tls_referenced_p (X))
2048 /* The macros REG_OK_FOR..._P assume that the arg is a REG rtx
2049 and check its validity for a certain class.
2050 We have two alternate definitions for each of them.
2051 The usual definition accepts all pseudo regs; the other rejects
2052 them unless they have been allocated suitable hard regs.
2053 The symbol REG_OK_STRICT causes the latter definition to be used.
2055 Most source files want to accept pseudo regs in the hope that
2056 they will get allocated to the class that the insn wants them to be in.
2057 Source files for reload pass need to be strict.
2058 After reload, it makes no difference, since pseudo regs have
2059 been eliminated by then. */
2061 #ifdef REG_OK_STRICT
2062 # define REG_OK_STRICT_FLAG 1
2064 # define REG_OK_STRICT_FLAG 0
2067 /* Nonzero if X is a hard reg that can be used as an index
2068 or if it is a pseudo reg in the non-strict case. */
2069 #define INT_REG_OK_FOR_INDEX_P(X, STRICT) \
2071 && (REGNO (X) <= 31 \
2072 || REGNO (X) == ARG_POINTER_REGNUM \
2073 || REGNO (X) >= FIRST_PSEUDO_REGISTER)) \
2074 || ((STRICT) && REGNO_OK_FOR_INDEX_P (REGNO (X))))
2076 /* Nonzero if X is a hard reg that can be used as a base reg
2077 or if it is a pseudo reg in the non-strict case. */
2078 #define INT_REG_OK_FOR_BASE_P(X, STRICT) \
2079 (REGNO (X) > 0 && INT_REG_OK_FOR_INDEX_P (X, (STRICT)))
2081 #define REG_OK_FOR_INDEX_P(X) INT_REG_OK_FOR_INDEX_P (X, REG_OK_STRICT_FLAG)
2082 #define REG_OK_FOR_BASE_P(X) INT_REG_OK_FOR_BASE_P (X, REG_OK_STRICT_FLAG)
2084 /* GO_IF_LEGITIMATE_ADDRESS recognizes an RTL expression
2085 that is a valid memory address for an instruction.
2086 The MODE argument is the machine mode for the MEM expression
2087 that wants to use this address.
2089 On the RS/6000, there are four valid address: a SYMBOL_REF that
2090 refers to a constant pool entry of an address (or the sum of it
2091 plus a constant), a short (16-bit signed) constant plus a register,
2092 the sum of two registers, or a register indirect, possibly with an
2093 auto-increment. For DFmode and DImode with a constant plus register,
2094 we must ensure that both words are addressable or PowerPC64 with offset
2097 For modes spanning multiple registers (DFmode in 32-bit GPRs,
2098 32-bit DImode, TImode), indexed addressing cannot be used because
2099 adjacent memory cells are accessed by adding word-sized offsets
2100 during assembly output. */
2102 #define GO_IF_LEGITIMATE_ADDRESS(MODE, X, ADDR) \
2103 { if (rs6000_legitimate_address (MODE, X, REG_OK_STRICT_FLAG)) \
2107 /* Try machine-dependent ways of modifying an illegitimate address
2108 to be legitimate. If we find one, return the new, valid address.
2109 This macro is used in only one place: `memory_address' in explow.c.
2111 OLDX is the address as it was before break_out_memory_refs was called.
2112 In some cases it is useful to look at this to decide what needs to be done.
2114 MODE and WIN are passed so that this macro can use
2115 GO_IF_LEGITIMATE_ADDRESS.
2117 It is always safe for this macro to do nothing. It exists to recognize
2118 opportunities to optimize the output.
2120 On RS/6000, first check for the sum of a register with a constant
2121 integer that is out of range. If so, generate code to add the
2122 constant with the low-order 16 bits masked to the register and force
2123 this result into another register (this can be done with `cau').
2124 Then generate an address of REG+(CONST&0xffff), allowing for the
2125 possibility of bit 16 being a one.
2127 Then check for the sum of a register and something not constant, try to
2128 load the other things into a register and return the sum. */
2130 #define LEGITIMIZE_ADDRESS(X,OLDX,MODE,WIN) \
2131 { rtx result = rs6000_legitimize_address (X, OLDX, MODE); \
2132 if (result != NULL_RTX) \
2139 /* Try a machine-dependent way of reloading an illegitimate address
2140 operand. If we find one, push the reload and jump to WIN. This
2141 macro is used in only one place: `find_reloads_address' in reload.c.
2143 Implemented on rs6000 by rs6000_legitimize_reload_address.
2144 Note that (X) is evaluated twice; this is safe in current usage. */
2146 #define LEGITIMIZE_RELOAD_ADDRESS(X,MODE,OPNUM,TYPE,IND_LEVELS,WIN) \
2149 (X) = rs6000_legitimize_reload_address ((X), (MODE), (OPNUM), \
2150 (int)(TYPE), (IND_LEVELS), &win); \
2155 /* Go to LABEL if ADDR (a legitimate address expression)
2156 has an effect that depends on the machine mode it is used for. */
2158 #define GO_IF_MODE_DEPENDENT_ADDRESS(ADDR,LABEL) \
2160 if (rs6000_mode_dependent_address (ADDR)) \
2164 /* The register number of the register used to address a table of
2165 static data addresses in memory. In some cases this register is
2166 defined by a processor's "application binary interface" (ABI).
2167 When this macro is defined, RTL is generated for this register
2168 once, as with the stack pointer and frame pointer registers. If
2169 this macro is not defined, it is up to the machine-dependent files
2170 to allocate such a register (if necessary). */
2172 #define RS6000_PIC_OFFSET_TABLE_REGNUM 30
2173 #define PIC_OFFSET_TABLE_REGNUM (flag_pic ? RS6000_PIC_OFFSET_TABLE_REGNUM : INVALID_REGNUM)
2175 #define TOC_REGISTER (TARGET_MINIMAL_TOC ? RS6000_PIC_OFFSET_TABLE_REGNUM : 2)
2177 /* Define this macro if the register defined by
2178 `PIC_OFFSET_TABLE_REGNUM' is clobbered by calls. Do not define
2179 this macro if `PIC_OFFSET_TABLE_REGNUM' is not defined. */
2181 /* #define PIC_OFFSET_TABLE_REG_CALL_CLOBBERED */
2183 /* By generating position-independent code, when two different
2184 programs (A and B) share a common library (libC.a), the text of
2185 the library can be shared whether or not the library is linked at
2186 the same address for both programs. In some of these
2187 environments, position-independent code requires not only the use
2188 of different addressing modes, but also special code to enable the
2189 use of these addressing modes.
2191 The `FINALIZE_PIC' macro serves as a hook to emit these special
2192 codes once the function is being compiled into assembly code, but
2193 not before. (It is not done before, because in the case of
2194 compiling an inline function, it would lead to multiple PIC
2195 prologues being included in functions which used inline functions
2196 and were compiled to assembly language.) */
2198 /* #define FINALIZE_PIC */
2200 /* A C expression that is nonzero if X is a legitimate immediate
2201 operand on the target machine when generating position independent
2202 code. You can assume that X satisfies `CONSTANT_P', so you need
2203 not check this. You can also assume FLAG_PIC is true, so you need
2204 not check it either. You need not define this macro if all
2205 constants (including `SYMBOL_REF') can be immediate operands when
2206 generating position independent code. */
2208 /* #define LEGITIMATE_PIC_OPERAND_P (X) */
2210 /* Define this if some processing needs to be done immediately before
2211 emitting code for an insn. */
2213 /* #define FINAL_PRESCAN_INSN(INSN,OPERANDS,NOPERANDS) */
2215 /* Specify the machine mode that this machine uses
2216 for the index in the tablejump instruction. */
2217 #define CASE_VECTOR_MODE SImode
2219 /* Define as C expression which evaluates to nonzero if the tablejump
2220 instruction expects the table to contain offsets from the address of the
2222 Do not define this if the table should contain absolute addresses. */
2223 #define CASE_VECTOR_PC_RELATIVE 1
2225 /* Define this as 1 if `char' should by default be signed; else as 0. */
2226 #define DEFAULT_SIGNED_CHAR 0
2228 /* This flag, if defined, says the same insns that convert to a signed fixnum
2229 also convert validly to an unsigned one. */
2231 /* #define FIXUNS_TRUNC_LIKE_FIX_TRUNC */
2233 /* Max number of bytes we can move from memory to memory
2234 in one reasonably fast instruction. */
2235 #define MOVE_MAX (! TARGET_POWERPC64 ? 4 : 8)
2236 #define MAX_MOVE_MAX 8
2238 /* Nonzero if access to memory by bytes is no faster than for words.
2239 Also nonzero if doing byte operations (specifically shifts) in registers
2241 #define SLOW_BYTE_ACCESS 1
2243 /* Define if operations between registers always perform the operation
2244 on the full register even if a narrower mode is specified. */
2245 #define WORD_REGISTER_OPERATIONS
2247 /* Define if loading in MODE, an integral mode narrower than BITS_PER_WORD
2248 will either zero-extend or sign-extend. The value of this macro should
2249 be the code that says which one of the two operations is implicitly
2250 done, NIL if none. */
2251 #define LOAD_EXTEND_OP(MODE) ZERO_EXTEND
2253 /* Define if loading short immediate values into registers sign extends. */
2254 #define SHORT_IMMEDIATES_SIGN_EXTEND
2256 /* Value is 1 if truncating an integer of INPREC bits to OUTPREC bits
2257 is done just by pretending it is already truncated. */
2258 #define TRULY_NOOP_TRUNCATION(OUTPREC, INPREC) 1
2260 /* The cntlzw and cntlzd instructions return 32 and 64 for input of zero. */
2261 #define CLZ_DEFINED_VALUE_AT_ZERO(MODE, VALUE) \
2262 ((VALUE) = ((MODE) == SImode ? 32 : 64))
2264 /* The CTZ patterns return -1 for input of zero. */
2265 #define CTZ_DEFINED_VALUE_AT_ZERO(MODE, VALUE) ((VALUE) = -1)
2267 /* Specify the machine mode that pointers have.
2268 After generation of rtl, the compiler makes no further distinction
2269 between pointers and any other objects of this machine mode. */
2270 #define Pmode (TARGET_32BIT ? SImode : DImode)
2272 /* Mode of a function address in a call instruction (for indexing purposes).
2273 Doesn't matter on RS/6000. */
2274 #define FUNCTION_MODE SImode
2276 /* Define this if addresses of constant functions
2277 shouldn't be put through pseudo regs where they can be cse'd.
2278 Desirable on machines where ordinary constants are expensive
2279 but a CALL with constant address is cheap. */
2280 #define NO_FUNCTION_CSE
2282 /* Define this to be nonzero if shift instructions ignore all but the low-order
2285 The sle and sre instructions which allow SHIFT_COUNT_TRUNCATED
2286 have been dropped from the PowerPC architecture. */
2288 #define SHIFT_COUNT_TRUNCATED (TARGET_POWER ? 1 : 0)
2290 /* Adjust the length of an INSN. LENGTH is the currently-computed length and
2291 should be adjusted to reflect any required changes. This macro is used when
2292 there is some systematic length adjustment required that would be difficult
2293 to express in the length attribute. */
2295 /* #define ADJUST_INSN_LENGTH(X,LENGTH) */
2297 /* Given a comparison code (EQ, NE, etc.) and the first operand of a
2298 COMPARE, return the mode to be used for the comparison. For
2299 floating-point, CCFPmode should be used. CCUNSmode should be used
2300 for unsigned comparisons. CCEQmode should be used when we are
2301 doing an inequality comparison on the result of a
2302 comparison. CCmode should be used in all other cases. */
2304 #define SELECT_CC_MODE(OP,X,Y) \
2305 (GET_MODE_CLASS (GET_MODE (X)) == MODE_FLOAT ? CCFPmode \
2306 : (OP) == GTU || (OP) == LTU || (OP) == GEU || (OP) == LEU ? CCUNSmode \
2307 : (((OP) == EQ || (OP) == NE) && GET_RTX_CLASS (GET_CODE (X)) == '<' \
2308 ? CCEQmode : CCmode))
2310 /* Can the condition code MODE be safely reversed? This is safe in
2311 all cases on this port, because at present it doesn't use the
2312 trapping FP comparisons (fcmpo). */
2313 #define REVERSIBLE_CC_MODE(MODE) 1
2315 /* Given a condition code and a mode, return the inverse condition. */
2316 #define REVERSE_CONDITION(CODE, MODE) rs6000_reverse_condition (MODE, CODE)
2318 /* Define the information needed to generate branch and scc insns. This is
2319 stored from the compare operation. */
2321 extern GTY(()) rtx rs6000_compare_op0;
2322 extern GTY(()) rtx rs6000_compare_op1;
2323 extern int rs6000_compare_fp_p;
2325 /* Control the assembler format that we output. */
2327 /* A C string constant describing how to begin a comment in the target
2328 assembler language. The compiler assumes that the comment will end at
2329 the end of the line. */
2330 #define ASM_COMMENT_START " #"
2332 /* Implicit library calls should use memcpy, not bcopy, etc. */
2334 #define TARGET_MEM_FUNCTIONS
2336 /* Flag to say the TOC is initialized */
2337 extern int toc_initialized;
2339 /* Macro to output a special constant pool entry. Go to WIN if we output
2340 it. Otherwise, it is written the usual way.
2342 On the RS/6000, toc entries are handled this way. */
2344 #define ASM_OUTPUT_SPECIAL_POOL_ENTRY(FILE, X, MODE, ALIGN, LABELNO, WIN) \
2345 { if (ASM_OUTPUT_SPECIAL_POOL_ENTRY_P (X, MODE)) \
2347 output_toc (FILE, X, LABELNO, MODE); \
2352 #ifdef HAVE_GAS_WEAK
2353 #define RS6000_WEAK 1
2355 #define RS6000_WEAK 0
2359 /* Used in lieu of ASM_WEAKEN_LABEL. */
2360 #define ASM_WEAKEN_DECL(FILE, DECL, NAME, VAL) \
2363 fputs ("\t.weak\t", (FILE)); \
2364 RS6000_OUTPUT_BASENAME ((FILE), (NAME)); \
2365 if ((DECL) && TREE_CODE (DECL) == FUNCTION_DECL \
2366 && DEFAULT_ABI == ABI_AIX) \
2369 fputs ("[DS]", (FILE)); \
2370 fputs ("\n\t.weak\t.", (FILE)); \
2371 RS6000_OUTPUT_BASENAME ((FILE), (NAME)); \
2373 fputc ('\n', (FILE)); \
2376 ASM_OUTPUT_DEF ((FILE), (NAME), (VAL)); \
2377 if ((DECL) && TREE_CODE (DECL) == FUNCTION_DECL \
2378 && DEFAULT_ABI == ABI_AIX) \
2380 fputs ("\t.set\t.", (FILE)); \
2381 RS6000_OUTPUT_BASENAME ((FILE), (NAME)); \
2382 fputs (",.", (FILE)); \
2383 RS6000_OUTPUT_BASENAME ((FILE), (VAL)); \
2384 fputc ('\n', (FILE)); \
2391 /* This implements the `alias' attribute. */
2392 #undef ASM_OUTPUT_DEF_FROM_DECLS
2393 #define ASM_OUTPUT_DEF_FROM_DECLS(FILE, DECL, TARGET) \
2396 const char *alias = XSTR (XEXP (DECL_RTL (DECL), 0), 0); \
2397 const char *name = IDENTIFIER_POINTER (TARGET); \
2398 if (TREE_CODE (DECL) == FUNCTION_DECL \
2399 && DEFAULT_ABI == ABI_AIX) \
2401 if (TREE_PUBLIC (DECL)) \
2403 if (!RS6000_WEAK || !DECL_WEAK (DECL)) \
2405 fputs ("\t.globl\t.", FILE); \
2406 RS6000_OUTPUT_BASENAME (FILE, alias); \
2407 putc ('\n', FILE); \
2410 else if (TARGET_XCOFF) \
2412 fputs ("\t.lglobl\t.", FILE); \
2413 RS6000_OUTPUT_BASENAME (FILE, alias); \
2414 putc ('\n', FILE); \
2416 fputs ("\t.set\t.", FILE); \
2417 RS6000_OUTPUT_BASENAME (FILE, alias); \
2418 fputs (",.", FILE); \
2419 RS6000_OUTPUT_BASENAME (FILE, name); \
2420 fputc ('\n', FILE); \
2422 ASM_OUTPUT_DEF (FILE, alias, name); \
2426 /* Output to assembler file text saying following lines
2427 may contain character constants, extra white space, comments, etc. */
2429 #define ASM_APP_ON ""
2431 /* Output to assembler file text saying following lines
2432 no longer contain unusual constructs. */
2434 #define ASM_APP_OFF ""
2436 /* How to refer to registers in assembler output.
2437 This sequence is indexed by compiler's hard-register-number (see above). */
2439 extern char rs6000_reg_names[][8]; /* register names (0 vs. %r0). */
2441 #define REGISTER_NAMES \
2443 &rs6000_reg_names[ 0][0], /* r0 */ \
2444 &rs6000_reg_names[ 1][0], /* r1 */ \
2445 &rs6000_reg_names[ 2][0], /* r2 */ \
2446 &rs6000_reg_names[ 3][0], /* r3 */ \
2447 &rs6000_reg_names[ 4][0], /* r4 */ \
2448 &rs6000_reg_names[ 5][0], /* r5 */ \
2449 &rs6000_reg_names[ 6][0], /* r6 */ \
2450 &rs6000_reg_names[ 7][0], /* r7 */ \
2451 &rs6000_reg_names[ 8][0], /* r8 */ \
2452 &rs6000_reg_names[ 9][0], /* r9 */ \
2453 &rs6000_reg_names[10][0], /* r10 */ \
2454 &rs6000_reg_names[11][0], /* r11 */ \
2455 &rs6000_reg_names[12][0], /* r12 */ \
2456 &rs6000_reg_names[13][0], /* r13 */ \
2457 &rs6000_reg_names[14][0], /* r14 */ \
2458 &rs6000_reg_names[15][0], /* r15 */ \
2459 &rs6000_reg_names[16][0], /* r16 */ \
2460 &rs6000_reg_names[17][0], /* r17 */ \
2461 &rs6000_reg_names[18][0], /* r18 */ \
2462 &rs6000_reg_names[19][0], /* r19 */ \
2463 &rs6000_reg_names[20][0], /* r20 */ \
2464 &rs6000_reg_names[21][0], /* r21 */ \
2465 &rs6000_reg_names[22][0], /* r22 */ \
2466 &rs6000_reg_names[23][0], /* r23 */ \
2467 &rs6000_reg_names[24][0], /* r24 */ \
2468 &rs6000_reg_names[25][0], /* r25 */ \
2469 &rs6000_reg_names[26][0], /* r26 */ \
2470 &rs6000_reg_names[27][0], /* r27 */ \
2471 &rs6000_reg_names[28][0], /* r28 */ \
2472 &rs6000_reg_names[29][0], /* r29 */ \
2473 &rs6000_reg_names[30][0], /* r30 */ \
2474 &rs6000_reg_names[31][0], /* r31 */ \
2476 &rs6000_reg_names[32][0], /* fr0 */ \
2477 &rs6000_reg_names[33][0], /* fr1 */ \
2478 &rs6000_reg_names[34][0], /* fr2 */ \
2479 &rs6000_reg_names[35][0], /* fr3 */ \
2480 &rs6000_reg_names[36][0], /* fr4 */ \
2481 &rs6000_reg_names[37][0], /* fr5 */ \
2482 &rs6000_reg_names[38][0], /* fr6 */ \
2483 &rs6000_reg_names[39][0], /* fr7 */ \
2484 &rs6000_reg_names[40][0], /* fr8 */ \
2485 &rs6000_reg_names[41][0], /* fr9 */ \
2486 &rs6000_reg_names[42][0], /* fr10 */ \
2487 &rs6000_reg_names[43][0], /* fr11 */ \
2488 &rs6000_reg_names[44][0], /* fr12 */ \
2489 &rs6000_reg_names[45][0], /* fr13 */ \
2490 &rs6000_reg_names[46][0], /* fr14 */ \
2491 &rs6000_reg_names[47][0], /* fr15 */ \
2492 &rs6000_reg_names[48][0], /* fr16 */ \
2493 &rs6000_reg_names[49][0], /* fr17 */ \
2494 &rs6000_reg_names[50][0], /* fr18 */ \
2495 &rs6000_reg_names[51][0], /* fr19 */ \
2496 &rs6000_reg_names[52][0], /* fr20 */ \
2497 &rs6000_reg_names[53][0], /* fr21 */ \
2498 &rs6000_reg_names[54][0], /* fr22 */ \
2499 &rs6000_reg_names[55][0], /* fr23 */ \
2500 &rs6000_reg_names[56][0], /* fr24 */ \
2501 &rs6000_reg_names[57][0], /* fr25 */ \
2502 &rs6000_reg_names[58][0], /* fr26 */ \
2503 &rs6000_reg_names[59][0], /* fr27 */ \
2504 &rs6000_reg_names[60][0], /* fr28 */ \
2505 &rs6000_reg_names[61][0], /* fr29 */ \
2506 &rs6000_reg_names[62][0], /* fr30 */ \
2507 &rs6000_reg_names[63][0], /* fr31 */ \
2509 &rs6000_reg_names[64][0], /* mq */ \
2510 &rs6000_reg_names[65][0], /* lr */ \
2511 &rs6000_reg_names[66][0], /* ctr */ \
2512 &rs6000_reg_names[67][0], /* ap */ \
2514 &rs6000_reg_names[68][0], /* cr0 */ \
2515 &rs6000_reg_names[69][0], /* cr1 */ \
2516 &rs6000_reg_names[70][0], /* cr2 */ \
2517 &rs6000_reg_names[71][0], /* cr3 */ \
2518 &rs6000_reg_names[72][0], /* cr4 */ \
2519 &rs6000_reg_names[73][0], /* cr5 */ \
2520 &rs6000_reg_names[74][0], /* cr6 */ \
2521 &rs6000_reg_names[75][0], /* cr7 */ \
2523 &rs6000_reg_names[76][0], /* xer */ \
2525 &rs6000_reg_names[77][0], /* v0 */ \
2526 &rs6000_reg_names[78][0], /* v1 */ \
2527 &rs6000_reg_names[79][0], /* v2 */ \
2528 &rs6000_reg_names[80][0], /* v3 */ \
2529 &rs6000_reg_names[81][0], /* v4 */ \
2530 &rs6000_reg_names[82][0], /* v5 */ \
2531 &rs6000_reg_names[83][0], /* v6 */ \
2532 &rs6000_reg_names[84][0], /* v7 */ \
2533 &rs6000_reg_names[85][0], /* v8 */ \
2534 &rs6000_reg_names[86][0], /* v9 */ \
2535 &rs6000_reg_names[87][0], /* v10 */ \
2536 &rs6000_reg_names[88][0], /* v11 */ \
2537 &rs6000_reg_names[89][0], /* v12 */ \
2538 &rs6000_reg_names[90][0], /* v13 */ \
2539 &rs6000_reg_names[91][0], /* v14 */ \
2540 &rs6000_reg_names[92][0], /* v15 */ \
2541 &rs6000_reg_names[93][0], /* v16 */ \
2542 &rs6000_reg_names[94][0], /* v17 */ \
2543 &rs6000_reg_names[95][0], /* v18 */ \
2544 &rs6000_reg_names[96][0], /* v19 */ \
2545 &rs6000_reg_names[97][0], /* v20 */ \
2546 &rs6000_reg_names[98][0], /* v21 */ \
2547 &rs6000_reg_names[99][0], /* v22 */ \
2548 &rs6000_reg_names[100][0], /* v23 */ \
2549 &rs6000_reg_names[101][0], /* v24 */ \
2550 &rs6000_reg_names[102][0], /* v25 */ \
2551 &rs6000_reg_names[103][0], /* v26 */ \
2552 &rs6000_reg_names[104][0], /* v27 */ \
2553 &rs6000_reg_names[105][0], /* v28 */ \
2554 &rs6000_reg_names[106][0], /* v29 */ \
2555 &rs6000_reg_names[107][0], /* v30 */ \
2556 &rs6000_reg_names[108][0], /* v31 */ \
2557 &rs6000_reg_names[109][0], /* vrsave */ \
2558 &rs6000_reg_names[110][0], /* vscr */ \
2559 &rs6000_reg_names[111][0], /* spe_acc */ \
2560 &rs6000_reg_names[112][0], /* spefscr */ \
2563 /* print-rtl can't handle the above REGISTER_NAMES, so define the
2564 following for it. Switch to use the alternate names since
2565 they are more mnemonic. */
2567 #define DEBUG_REGISTER_NAMES \
2569 "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \
2570 "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15", \
2571 "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23", \
2572 "r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31", \
2573 "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7", \
2574 "f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15", \
2575 "f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23", \
2576 "f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31", \
2577 "mq", "lr", "ctr", "ap", \
2578 "cr0", "cr1", "cr2", "cr3", "cr4", "cr5", "cr6", "cr7", \
2580 "v0", "v1", "v2", "v3", "v4", "v5", "v6", "v7", \
2581 "v8", "v9", "v10", "v11", "v12", "v13", "v14", "v15", \
2582 "v16", "v17", "v18", "v19", "v20", "v21", "v22", "v23", \
2583 "v24", "v25", "v26", "v27", "v28", "v29", "v30", "v31", \
2585 "spe_acc", "spefscr" \
2588 /* Table of additional register names to use in user input. */
2590 #define ADDITIONAL_REGISTER_NAMES \
2591 {{"r0", 0}, {"r1", 1}, {"r2", 2}, {"r3", 3}, \
2592 {"r4", 4}, {"r5", 5}, {"r6", 6}, {"r7", 7}, \
2593 {"r8", 8}, {"r9", 9}, {"r10", 10}, {"r11", 11}, \
2594 {"r12", 12}, {"r13", 13}, {"r14", 14}, {"r15", 15}, \
2595 {"r16", 16}, {"r17", 17}, {"r18", 18}, {"r19", 19}, \
2596 {"r20", 20}, {"r21", 21}, {"r22", 22}, {"r23", 23}, \
2597 {"r24", 24}, {"r25", 25}, {"r26", 26}, {"r27", 27}, \
2598 {"r28", 28}, {"r29", 29}, {"r30", 30}, {"r31", 31}, \
2599 {"fr0", 32}, {"fr1", 33}, {"fr2", 34}, {"fr3", 35}, \
2600 {"fr4", 36}, {"fr5", 37}, {"fr6", 38}, {"fr7", 39}, \
2601 {"fr8", 40}, {"fr9", 41}, {"fr10", 42}, {"fr11", 43}, \
2602 {"fr12", 44}, {"fr13", 45}, {"fr14", 46}, {"fr15", 47}, \
2603 {"fr16", 48}, {"fr17", 49}, {"fr18", 50}, {"fr19", 51}, \
2604 {"fr20", 52}, {"fr21", 53}, {"fr22", 54}, {"fr23", 55}, \
2605 {"fr24", 56}, {"fr25", 57}, {"fr26", 58}, {"fr27", 59}, \
2606 {"fr28", 60}, {"fr29", 61}, {"fr30", 62}, {"fr31", 63}, \
2607 {"v0", 77}, {"v1", 78}, {"v2", 79}, {"v3", 80}, \
2608 {"v4", 81}, {"v5", 82}, {"v6", 83}, {"v7", 84}, \
2609 {"v8", 85}, {"v9", 86}, {"v10", 87}, {"v11", 88}, \
2610 {"v12", 89}, {"v13", 90}, {"v14", 91}, {"v15", 92}, \
2611 {"v16", 93}, {"v17", 94}, {"v18", 95}, {"v19", 96}, \
2612 {"v20", 97}, {"v21", 98}, {"v22", 99}, {"v23", 100}, \
2613 {"v24", 101},{"v25", 102},{"v26", 103},{"v27", 104}, \
2614 {"v28", 105},{"v29", 106},{"v30", 107},{"v31", 108}, \
2615 {"vrsave", 109}, {"vscr", 110}, \
2616 {"spe_acc", 111}, {"spefscr", 112}, \
2617 /* no additional names for: mq, lr, ctr, ap */ \
2618 {"cr0", 68}, {"cr1", 69}, {"cr2", 70}, {"cr3", 71}, \
2619 {"cr4", 72}, {"cr5", 73}, {"cr6", 74}, {"cr7", 75}, \
2620 {"cc", 68}, {"sp", 1}, {"toc", 2} }
2622 /* Text to write out after a CALL that may be replaced by glue code by
2623 the loader. This depends on the AIX version. */
2624 #define RS6000_CALL_GLUE "cror 31,31,31"
2626 /* This is how to output an element of a case-vector that is relative. */
2628 #define ASM_OUTPUT_ADDR_DIFF_ELT(FILE, BODY, VALUE, REL) \
2629 do { char buf[100]; \
2630 fputs ("\t.long ", FILE); \
2631 ASM_GENERATE_INTERNAL_LABEL (buf, "L", VALUE); \
2632 assemble_name (FILE, buf); \
2634 ASM_GENERATE_INTERNAL_LABEL (buf, "L", REL); \
2635 assemble_name (FILE, buf); \
2636 putc ('\n', FILE); \
2639 /* This is how to output an assembler line
2640 that says to advance the location counter
2641 to a multiple of 2**LOG bytes. */
2643 #define ASM_OUTPUT_ALIGN(FILE,LOG) \
2645 fprintf (FILE, "\t.align %d\n", (LOG))
2647 /* Pick up the return address upon entry to a procedure. Used for
2648 dwarf2 unwind information. This also enables the table driven
2651 #define INCOMING_RETURN_ADDR_RTX gen_rtx_REG (Pmode, LINK_REGISTER_REGNUM)
2652 #define DWARF_FRAME_RETURN_COLUMN DWARF_FRAME_REGNUM (LINK_REGISTER_REGNUM)
2654 /* Describe how we implement __builtin_eh_return. */
2655 #define EH_RETURN_DATA_REGNO(N) ((N) < 4 ? (N) + 3 : INVALID_REGNUM)
2656 #define EH_RETURN_STACKADJ_RTX gen_rtx_REG (Pmode, 10)
2658 /* Print operand X (an rtx) in assembler syntax to file FILE.
2659 CODE is a letter or dot (`z' in `%z0') or 0 if no letter was specified.
2660 For `%' followed by punctuation, CODE is the punctuation and X is null. */
2662 #define PRINT_OPERAND(FILE, X, CODE) print_operand (FILE, X, CODE)
2664 /* Define which CODE values are valid. */
2666 #define PRINT_OPERAND_PUNCT_VALID_P(CODE) \
2667 ((CODE) == '.' || (CODE) == '&')
2669 /* Print a memory address as an operand to reference that memory location. */
2671 #define PRINT_OPERAND_ADDRESS(FILE, ADDR) print_operand_address (FILE, ADDR)
2673 /* Define the codes that are matched by predicates in rs6000.c. */
2675 #define PREDICATE_CODES \
2676 {"any_operand", {CONST_INT, CONST_DOUBLE, CONST, SYMBOL_REF, \
2677 LABEL_REF, SUBREG, REG, MEM, PARALLEL}}, \
2678 {"zero_constant", {CONST_INT, CONST_DOUBLE, CONST, SYMBOL_REF, \
2679 LABEL_REF, SUBREG, REG, MEM}}, \
2680 {"short_cint_operand", {CONST_INT}}, \
2681 {"u_short_cint_operand", {CONST_INT}}, \
2682 {"non_short_cint_operand", {CONST_INT}}, \
2683 {"exact_log2_cint_operand", {CONST_INT}}, \
2684 {"gpc_reg_operand", {SUBREG, REG}}, \
2685 {"cc_reg_operand", {SUBREG, REG}}, \
2686 {"cc_reg_not_cr0_operand", {SUBREG, REG}}, \
2687 {"reg_or_short_operand", {SUBREG, REG, CONST_INT}}, \
2688 {"reg_or_neg_short_operand", {SUBREG, REG, CONST_INT}}, \
2689 {"reg_or_aligned_short_operand", {SUBREG, REG, CONST_INT}}, \
2690 {"reg_or_u_short_operand", {SUBREG, REG, CONST_INT}}, \
2691 {"reg_or_cint_operand", {SUBREG, REG, CONST_INT}}, \
2692 {"reg_or_arith_cint_operand", {SUBREG, REG, CONST_INT}}, \
2693 {"reg_or_add_cint64_operand", {SUBREG, REG, CONST_INT}}, \
2694 {"reg_or_sub_cint64_operand", {SUBREG, REG, CONST_INT}}, \
2695 {"reg_or_logical_cint_operand", {SUBREG, REG, CONST_INT, CONST_DOUBLE}}, \
2696 {"got_operand", {SYMBOL_REF, CONST, LABEL_REF}}, \
2697 {"got_no_const_operand", {SYMBOL_REF, LABEL_REF}}, \
2698 {"rs6000_tls_symbol_ref", {SYMBOL_REF}}, \
2699 {"easy_fp_constant", {CONST_DOUBLE}}, \
2700 {"easy_vector_constant", {CONST_VECTOR}}, \
2701 {"easy_vector_constant_add_self", {CONST_VECTOR}}, \
2702 {"zero_fp_constant", {CONST_DOUBLE}}, \
2703 {"reg_or_mem_operand", {SUBREG, MEM, REG}}, \
2704 {"lwa_operand", {SUBREG, MEM, REG}}, \
2705 {"volatile_mem_operand", {MEM}}, \
2706 {"offsettable_mem_operand", {MEM}}, \
2707 {"mem_or_easy_const_operand", {SUBREG, MEM, CONST_DOUBLE}}, \
2708 {"add_operand", {SUBREG, REG, CONST_INT}}, \
2709 {"non_add_cint_operand", {CONST_INT}}, \
2710 {"and_operand", {SUBREG, REG, CONST_INT}}, \
2711 {"and64_operand", {SUBREG, REG, CONST_INT, CONST_DOUBLE}}, \
2712 {"and64_2_operand", {SUBREG, REG, CONST_INT}}, \
2713 {"logical_operand", {SUBREG, REG, CONST_INT, CONST_DOUBLE}}, \
2714 {"non_logical_cint_operand", {CONST_INT, CONST_DOUBLE}}, \
2715 {"mask_operand", {CONST_INT}}, \
2716 {"mask_operand_wrap", {CONST_INT}}, \
2717 {"mask64_operand", {CONST_INT}}, \
2718 {"mask64_2_operand", {CONST_INT}}, \
2719 {"count_register_operand", {REG}}, \
2720 {"xer_operand", {REG}}, \
2721 {"symbol_ref_operand", {SYMBOL_REF}}, \
2722 {"rs6000_tls_symbol_ref", {SYMBOL_REF}}, \
2723 {"call_operand", {SYMBOL_REF, REG}}, \
2724 {"current_file_function_operand", {SYMBOL_REF}}, \
2725 {"input_operand", {SUBREG, MEM, REG, CONST_INT, \
2726 CONST_DOUBLE, SYMBOL_REF}}, \
2727 {"load_multiple_operation", {PARALLEL}}, \
2728 {"store_multiple_operation", {PARALLEL}}, \
2729 {"vrsave_operation", {PARALLEL}}, \
2730 {"branch_comparison_operator", {EQ, NE, LE, LT, GE, \
2731 GT, LEU, LTU, GEU, GTU, \
2732 UNORDERED, ORDERED, \
2734 {"branch_positive_comparison_operator", {EQ, LT, GT, LTU, GTU, \
2736 {"scc_comparison_operator", {EQ, NE, LE, LT, GE, \
2737 GT, LEU, LTU, GEU, GTU, \
2738 UNORDERED, ORDERED, \
2740 {"trap_comparison_operator", {EQ, NE, LE, LT, GE, \
2741 GT, LEU, LTU, GEU, GTU}}, \
2742 {"boolean_operator", {AND, IOR, XOR}}, \
2743 {"boolean_or_operator", {IOR, XOR}}, \
2744 {"altivec_register_operand", {REG}}, \
2745 {"min_max_operator", {SMIN, SMAX, UMIN, UMAX}},
2747 /* uncomment for disabling the corresponding default options */
2748 /* #define MACHINE_no_sched_interblock */
2749 /* #define MACHINE_no_sched_speculative */
2750 /* #define MACHINE_no_sched_speculative_load */
2752 /* General flags. */
2753 extern int flag_pic;
2754 extern int optimize;
2755 extern int flag_expensive_optimizations;
2756 extern int frame_pointer_needed;
2758 enum rs6000_builtins
2760 /* AltiVec builtins. */
2761 ALTIVEC_BUILTIN_ST_INTERNAL_4si,
2762 ALTIVEC_BUILTIN_LD_INTERNAL_4si,
2763 ALTIVEC_BUILTIN_ST_INTERNAL_8hi,
2764 ALTIVEC_BUILTIN_LD_INTERNAL_8hi,
2765 ALTIVEC_BUILTIN_ST_INTERNAL_16qi,
2766 ALTIVEC_BUILTIN_LD_INTERNAL_16qi,
2767 ALTIVEC_BUILTIN_ST_INTERNAL_4sf,
2768 ALTIVEC_BUILTIN_LD_INTERNAL_4sf,
2769 ALTIVEC_BUILTIN_VADDUBM,
2770 ALTIVEC_BUILTIN_VADDUHM,
2771 ALTIVEC_BUILTIN_VADDUWM,
2772 ALTIVEC_BUILTIN_VADDFP,
2773 ALTIVEC_BUILTIN_VADDCUW,
2774 ALTIVEC_BUILTIN_VADDUBS,
2775 ALTIVEC_BUILTIN_VADDSBS,
2776 ALTIVEC_BUILTIN_VADDUHS,
2777 ALTIVEC_BUILTIN_VADDSHS,
2778 ALTIVEC_BUILTIN_VADDUWS,
2779 ALTIVEC_BUILTIN_VADDSWS,
2780 ALTIVEC_BUILTIN_VAND,
2781 ALTIVEC_BUILTIN_VANDC,
2782 ALTIVEC_BUILTIN_VAVGUB,
2783 ALTIVEC_BUILTIN_VAVGSB,
2784 ALTIVEC_BUILTIN_VAVGUH,
2785 ALTIVEC_BUILTIN_VAVGSH,
2786 ALTIVEC_BUILTIN_VAVGUW,
2787 ALTIVEC_BUILTIN_VAVGSW,
2788 ALTIVEC_BUILTIN_VCFUX,
2789 ALTIVEC_BUILTIN_VCFSX,
2790 ALTIVEC_BUILTIN_VCTSXS,
2791 ALTIVEC_BUILTIN_VCTUXS,
2792 ALTIVEC_BUILTIN_VCMPBFP,
2793 ALTIVEC_BUILTIN_VCMPEQUB,
2794 ALTIVEC_BUILTIN_VCMPEQUH,
2795 ALTIVEC_BUILTIN_VCMPEQUW,
2796 ALTIVEC_BUILTIN_VCMPEQFP,
2797 ALTIVEC_BUILTIN_VCMPGEFP,
2798 ALTIVEC_BUILTIN_VCMPGTUB,
2799 ALTIVEC_BUILTIN_VCMPGTSB,
2800 ALTIVEC_BUILTIN_VCMPGTUH,
2801 ALTIVEC_BUILTIN_VCMPGTSH,
2802 ALTIVEC_BUILTIN_VCMPGTUW,
2803 ALTIVEC_BUILTIN_VCMPGTSW,
2804 ALTIVEC_BUILTIN_VCMPGTFP,
2805 ALTIVEC_BUILTIN_VEXPTEFP,
2806 ALTIVEC_BUILTIN_VLOGEFP,
2807 ALTIVEC_BUILTIN_VMADDFP,
2808 ALTIVEC_BUILTIN_VMAXUB,
2809 ALTIVEC_BUILTIN_VMAXSB,
2810 ALTIVEC_BUILTIN_VMAXUH,
2811 ALTIVEC_BUILTIN_VMAXSH,
2812 ALTIVEC_BUILTIN_VMAXUW,
2813 ALTIVEC_BUILTIN_VMAXSW,
2814 ALTIVEC_BUILTIN_VMAXFP,
2815 ALTIVEC_BUILTIN_VMHADDSHS,
2816 ALTIVEC_BUILTIN_VMHRADDSHS,
2817 ALTIVEC_BUILTIN_VMLADDUHM,
2818 ALTIVEC_BUILTIN_VMRGHB,
2819 ALTIVEC_BUILTIN_VMRGHH,
2820 ALTIVEC_BUILTIN_VMRGHW,
2821 ALTIVEC_BUILTIN_VMRGLB,
2822 ALTIVEC_BUILTIN_VMRGLH,
2823 ALTIVEC_BUILTIN_VMRGLW,
2824 ALTIVEC_BUILTIN_VMSUMUBM,
2825 ALTIVEC_BUILTIN_VMSUMMBM,
2826 ALTIVEC_BUILTIN_VMSUMUHM,
2827 ALTIVEC_BUILTIN_VMSUMSHM,
2828 ALTIVEC_BUILTIN_VMSUMUHS,
2829 ALTIVEC_BUILTIN_VMSUMSHS,
2830 ALTIVEC_BUILTIN_VMINUB,
2831 ALTIVEC_BUILTIN_VMINSB,
2832 ALTIVEC_BUILTIN_VMINUH,
2833 ALTIVEC_BUILTIN_VMINSH,
2834 ALTIVEC_BUILTIN_VMINUW,
2835 ALTIVEC_BUILTIN_VMINSW,
2836 ALTIVEC_BUILTIN_VMINFP,
2837 ALTIVEC_BUILTIN_VMULEUB,
2838 ALTIVEC_BUILTIN_VMULESB,
2839 ALTIVEC_BUILTIN_VMULEUH,
2840 ALTIVEC_BUILTIN_VMULESH,
2841 ALTIVEC_BUILTIN_VMULOUB,
2842 ALTIVEC_BUILTIN_VMULOSB,
2843 ALTIVEC_BUILTIN_VMULOUH,
2844 ALTIVEC_BUILTIN_VMULOSH,
2845 ALTIVEC_BUILTIN_VNMSUBFP,
2846 ALTIVEC_BUILTIN_VNOR,
2847 ALTIVEC_BUILTIN_VOR,
2848 ALTIVEC_BUILTIN_VSEL_4SI,
2849 ALTIVEC_BUILTIN_VSEL_4SF,
2850 ALTIVEC_BUILTIN_VSEL_8HI,
2851 ALTIVEC_BUILTIN_VSEL_16QI,
2852 ALTIVEC_BUILTIN_VPERM_4SI,
2853 ALTIVEC_BUILTIN_VPERM_4SF,
2854 ALTIVEC_BUILTIN_VPERM_8HI,
2855 ALTIVEC_BUILTIN_VPERM_16QI,
2856 ALTIVEC_BUILTIN_VPKUHUM,
2857 ALTIVEC_BUILTIN_VPKUWUM,
2858 ALTIVEC_BUILTIN_VPKPX,
2859 ALTIVEC_BUILTIN_VPKUHSS,
2860 ALTIVEC_BUILTIN_VPKSHSS,
2861 ALTIVEC_BUILTIN_VPKUWSS,
2862 ALTIVEC_BUILTIN_VPKSWSS,
2863 ALTIVEC_BUILTIN_VPKUHUS,
2864 ALTIVEC_BUILTIN_VPKSHUS,
2865 ALTIVEC_BUILTIN_VPKUWUS,
2866 ALTIVEC_BUILTIN_VPKSWUS,
2867 ALTIVEC_BUILTIN_VREFP,
2868 ALTIVEC_BUILTIN_VRFIM,
2869 ALTIVEC_BUILTIN_VRFIN,
2870 ALTIVEC_BUILTIN_VRFIP,
2871 ALTIVEC_BUILTIN_VRFIZ,
2872 ALTIVEC_BUILTIN_VRLB,
2873 ALTIVEC_BUILTIN_VRLH,
2874 ALTIVEC_BUILTIN_VRLW,
2875 ALTIVEC_BUILTIN_VRSQRTEFP,
2876 ALTIVEC_BUILTIN_VSLB,
2877 ALTIVEC_BUILTIN_VSLH,
2878 ALTIVEC_BUILTIN_VSLW,
2879 ALTIVEC_BUILTIN_VSL,
2880 ALTIVEC_BUILTIN_VSLO,
2881 ALTIVEC_BUILTIN_VSPLTB,
2882 ALTIVEC_BUILTIN_VSPLTH,
2883 ALTIVEC_BUILTIN_VSPLTW,
2884 ALTIVEC_BUILTIN_VSPLTISB,
2885 ALTIVEC_BUILTIN_VSPLTISH,
2886 ALTIVEC_BUILTIN_VSPLTISW,
2887 ALTIVEC_BUILTIN_VSRB,
2888 ALTIVEC_BUILTIN_VSRH,
2889 ALTIVEC_BUILTIN_VSRW,
2890 ALTIVEC_BUILTIN_VSRAB,
2891 ALTIVEC_BUILTIN_VSRAH,
2892 ALTIVEC_BUILTIN_VSRAW,
2893 ALTIVEC_BUILTIN_VSR,
2894 ALTIVEC_BUILTIN_VSRO,
2895 ALTIVEC_BUILTIN_VSUBUBM,
2896 ALTIVEC_BUILTIN_VSUBUHM,
2897 ALTIVEC_BUILTIN_VSUBUWM,
2898 ALTIVEC_BUILTIN_VSUBFP,
2899 ALTIVEC_BUILTIN_VSUBCUW,
2900 ALTIVEC_BUILTIN_VSUBUBS,
2901 ALTIVEC_BUILTIN_VSUBSBS,
2902 ALTIVEC_BUILTIN_VSUBUHS,
2903 ALTIVEC_BUILTIN_VSUBSHS,
2904 ALTIVEC_BUILTIN_VSUBUWS,
2905 ALTIVEC_BUILTIN_VSUBSWS,
2906 ALTIVEC_BUILTIN_VSUM4UBS,
2907 ALTIVEC_BUILTIN_VSUM4SBS,
2908 ALTIVEC_BUILTIN_VSUM4SHS,
2909 ALTIVEC_BUILTIN_VSUM2SWS,
2910 ALTIVEC_BUILTIN_VSUMSWS,
2911 ALTIVEC_BUILTIN_VXOR,
2912 ALTIVEC_BUILTIN_VSLDOI_16QI,
2913 ALTIVEC_BUILTIN_VSLDOI_8HI,
2914 ALTIVEC_BUILTIN_VSLDOI_4SI,
2915 ALTIVEC_BUILTIN_VSLDOI_4SF,
2916 ALTIVEC_BUILTIN_VUPKHSB,
2917 ALTIVEC_BUILTIN_VUPKHPX,
2918 ALTIVEC_BUILTIN_VUPKHSH,
2919 ALTIVEC_BUILTIN_VUPKLSB,
2920 ALTIVEC_BUILTIN_VUPKLPX,
2921 ALTIVEC_BUILTIN_VUPKLSH,
2922 ALTIVEC_BUILTIN_MTVSCR,
2923 ALTIVEC_BUILTIN_MFVSCR,
2924 ALTIVEC_BUILTIN_DSSALL,
2925 ALTIVEC_BUILTIN_DSS,
2926 ALTIVEC_BUILTIN_LVSL,
2927 ALTIVEC_BUILTIN_LVSR,
2928 ALTIVEC_BUILTIN_DSTT,
2929 ALTIVEC_BUILTIN_DSTST,
2930 ALTIVEC_BUILTIN_DSTSTT,
2931 ALTIVEC_BUILTIN_DST,
2932 ALTIVEC_BUILTIN_LVEBX,
2933 ALTIVEC_BUILTIN_LVEHX,
2934 ALTIVEC_BUILTIN_LVEWX,
2935 ALTIVEC_BUILTIN_LVXL,
2936 ALTIVEC_BUILTIN_LVX,
2937 ALTIVEC_BUILTIN_STVX,
2938 ALTIVEC_BUILTIN_STVEBX,
2939 ALTIVEC_BUILTIN_STVEHX,
2940 ALTIVEC_BUILTIN_STVEWX,
2941 ALTIVEC_BUILTIN_STVXL,
2942 ALTIVEC_BUILTIN_VCMPBFP_P,
2943 ALTIVEC_BUILTIN_VCMPEQFP_P,
2944 ALTIVEC_BUILTIN_VCMPEQUB_P,
2945 ALTIVEC_BUILTIN_VCMPEQUH_P,
2946 ALTIVEC_BUILTIN_VCMPEQUW_P,
2947 ALTIVEC_BUILTIN_VCMPGEFP_P,
2948 ALTIVEC_BUILTIN_VCMPGTFP_P,
2949 ALTIVEC_BUILTIN_VCMPGTSB_P,
2950 ALTIVEC_BUILTIN_VCMPGTSH_P,
2951 ALTIVEC_BUILTIN_VCMPGTSW_P,
2952 ALTIVEC_BUILTIN_VCMPGTUB_P,
2953 ALTIVEC_BUILTIN_VCMPGTUH_P,
2954 ALTIVEC_BUILTIN_VCMPGTUW_P,
2955 ALTIVEC_BUILTIN_ABSS_V4SI,
2956 ALTIVEC_BUILTIN_ABSS_V8HI,
2957 ALTIVEC_BUILTIN_ABSS_V16QI,
2958 ALTIVEC_BUILTIN_ABS_V4SI,
2959 ALTIVEC_BUILTIN_ABS_V4SF,
2960 ALTIVEC_BUILTIN_ABS_V8HI,
2961 ALTIVEC_BUILTIN_ABS_V16QI
2963 , SPE_BUILTIN_EVADDW,
2966 SPE_BUILTIN_EVDIVWS,
2967 SPE_BUILTIN_EVDIVWU,
2969 SPE_BUILTIN_EVFSADD,
2970 SPE_BUILTIN_EVFSDIV,
2971 SPE_BUILTIN_EVFSMUL,
2972 SPE_BUILTIN_EVFSSUB,
2976 SPE_BUILTIN_EVLHHESPLATX,
2977 SPE_BUILTIN_EVLHHOSSPLATX,
2978 SPE_BUILTIN_EVLHHOUSPLATX,
2979 SPE_BUILTIN_EVLWHEX,
2980 SPE_BUILTIN_EVLWHOSX,
2981 SPE_BUILTIN_EVLWHOUX,
2982 SPE_BUILTIN_EVLWHSPLATX,
2983 SPE_BUILTIN_EVLWWSPLATX,
2984 SPE_BUILTIN_EVMERGEHI,
2985 SPE_BUILTIN_EVMERGEHILO,
2986 SPE_BUILTIN_EVMERGELO,
2987 SPE_BUILTIN_EVMERGELOHI,
2988 SPE_BUILTIN_EVMHEGSMFAA,
2989 SPE_BUILTIN_EVMHEGSMFAN,
2990 SPE_BUILTIN_EVMHEGSMIAA,
2991 SPE_BUILTIN_EVMHEGSMIAN,
2992 SPE_BUILTIN_EVMHEGUMIAA,
2993 SPE_BUILTIN_EVMHEGUMIAN,
2994 SPE_BUILTIN_EVMHESMF,
2995 SPE_BUILTIN_EVMHESMFA,
2996 SPE_BUILTIN_EVMHESMFAAW,
2997 SPE_BUILTIN_EVMHESMFANW,
2998 SPE_BUILTIN_EVMHESMI,
2999 SPE_BUILTIN_EVMHESMIA,
3000 SPE_BUILTIN_EVMHESMIAAW,
3001 SPE_BUILTIN_EVMHESMIANW,
3002 SPE_BUILTIN_EVMHESSF,
3003 SPE_BUILTIN_EVMHESSFA,
3004 SPE_BUILTIN_EVMHESSFAAW,
3005 SPE_BUILTIN_EVMHESSFANW,
3006 SPE_BUILTIN_EVMHESSIAAW,
3007 SPE_BUILTIN_EVMHESSIANW,
3008 SPE_BUILTIN_EVMHEUMI,
3009 SPE_BUILTIN_EVMHEUMIA,
3010 SPE_BUILTIN_EVMHEUMIAAW,
3011 SPE_BUILTIN_EVMHEUMIANW,
3012 SPE_BUILTIN_EVMHEUSIAAW,
3013 SPE_BUILTIN_EVMHEUSIANW,
3014 SPE_BUILTIN_EVMHOGSMFAA,
3015 SPE_BUILTIN_EVMHOGSMFAN,
3016 SPE_BUILTIN_EVMHOGSMIAA,
3017 SPE_BUILTIN_EVMHOGSMIAN,
3018 SPE_BUILTIN_EVMHOGUMIAA,
3019 SPE_BUILTIN_EVMHOGUMIAN,
3020 SPE_BUILTIN_EVMHOSMF,
3021 SPE_BUILTIN_EVMHOSMFA,
3022 SPE_BUILTIN_EVMHOSMFAAW,
3023 SPE_BUILTIN_EVMHOSMFANW,
3024 SPE_BUILTIN_EVMHOSMI,
3025 SPE_BUILTIN_EVMHOSMIA,
3026 SPE_BUILTIN_EVMHOSMIAAW,
3027 SPE_BUILTIN_EVMHOSMIANW,
3028 SPE_BUILTIN_EVMHOSSF,
3029 SPE_BUILTIN_EVMHOSSFA,
3030 SPE_BUILTIN_EVMHOSSFAAW,
3031 SPE_BUILTIN_EVMHOSSFANW,
3032 SPE_BUILTIN_EVMHOSSIAAW,
3033 SPE_BUILTIN_EVMHOSSIANW,
3034 SPE_BUILTIN_EVMHOUMI,
3035 SPE_BUILTIN_EVMHOUMIA,
3036 SPE_BUILTIN_EVMHOUMIAAW,
3037 SPE_BUILTIN_EVMHOUMIANW,
3038 SPE_BUILTIN_EVMHOUSIAAW,
3039 SPE_BUILTIN_EVMHOUSIANW,
3040 SPE_BUILTIN_EVMWHSMF,
3041 SPE_BUILTIN_EVMWHSMFA,
3042 SPE_BUILTIN_EVMWHSMI,
3043 SPE_BUILTIN_EVMWHSMIA,
3044 SPE_BUILTIN_EVMWHSSF,
3045 SPE_BUILTIN_EVMWHSSFA,
3046 SPE_BUILTIN_EVMWHUMI,
3047 SPE_BUILTIN_EVMWHUMIA,
3048 SPE_BUILTIN_EVMWLSMIAAW,
3049 SPE_BUILTIN_EVMWLSMIANW,
3050 SPE_BUILTIN_EVMWLSSIAAW,
3051 SPE_BUILTIN_EVMWLSSIANW,
3052 SPE_BUILTIN_EVMWLUMI,
3053 SPE_BUILTIN_EVMWLUMIA,
3054 SPE_BUILTIN_EVMWLUMIAAW,
3055 SPE_BUILTIN_EVMWLUMIANW,
3056 SPE_BUILTIN_EVMWLUSIAAW,
3057 SPE_BUILTIN_EVMWLUSIANW,
3058 SPE_BUILTIN_EVMWSMF,
3059 SPE_BUILTIN_EVMWSMFA,
3060 SPE_BUILTIN_EVMWSMFAA,
3061 SPE_BUILTIN_EVMWSMFAN,
3062 SPE_BUILTIN_EVMWSMI,
3063 SPE_BUILTIN_EVMWSMIA,
3064 SPE_BUILTIN_EVMWSMIAA,
3065 SPE_BUILTIN_EVMWSMIAN,
3066 SPE_BUILTIN_EVMWHSSFAA,
3067 SPE_BUILTIN_EVMWSSF,
3068 SPE_BUILTIN_EVMWSSFA,
3069 SPE_BUILTIN_EVMWSSFAA,
3070 SPE_BUILTIN_EVMWSSFAN,
3071 SPE_BUILTIN_EVMWUMI,
3072 SPE_BUILTIN_EVMWUMIA,
3073 SPE_BUILTIN_EVMWUMIAA,
3074 SPE_BUILTIN_EVMWUMIAN,
3083 SPE_BUILTIN_EVSTDDX,
3084 SPE_BUILTIN_EVSTDHX,
3085 SPE_BUILTIN_EVSTDWX,
3086 SPE_BUILTIN_EVSTWHEX,
3087 SPE_BUILTIN_EVSTWHOX,
3088 SPE_BUILTIN_EVSTWWEX,
3089 SPE_BUILTIN_EVSTWWOX,
3090 SPE_BUILTIN_EVSUBFW,
3093 SPE_BUILTIN_EVADDSMIAAW,
3094 SPE_BUILTIN_EVADDSSIAAW,
3095 SPE_BUILTIN_EVADDUMIAAW,
3096 SPE_BUILTIN_EVADDUSIAAW,
3097 SPE_BUILTIN_EVCNTLSW,
3098 SPE_BUILTIN_EVCNTLZW,
3099 SPE_BUILTIN_EVEXTSB,
3100 SPE_BUILTIN_EVEXTSH,
3101 SPE_BUILTIN_EVFSABS,
3102 SPE_BUILTIN_EVFSCFSF,
3103 SPE_BUILTIN_EVFSCFSI,
3104 SPE_BUILTIN_EVFSCFUF,
3105 SPE_BUILTIN_EVFSCFUI,
3106 SPE_BUILTIN_EVFSCTSF,
3107 SPE_BUILTIN_EVFSCTSI,
3108 SPE_BUILTIN_EVFSCTSIZ,
3109 SPE_BUILTIN_EVFSCTUF,
3110 SPE_BUILTIN_EVFSCTUI,
3111 SPE_BUILTIN_EVFSCTUIZ,
3112 SPE_BUILTIN_EVFSNABS,
3113 SPE_BUILTIN_EVFSNEG,
3117 SPE_BUILTIN_EVSUBFSMIAAW,
3118 SPE_BUILTIN_EVSUBFSSIAAW,
3119 SPE_BUILTIN_EVSUBFUMIAAW,
3120 SPE_BUILTIN_EVSUBFUSIAAW,
3121 SPE_BUILTIN_EVADDIW,
3125 SPE_BUILTIN_EVLHHESPLAT,
3126 SPE_BUILTIN_EVLHHOSSPLAT,
3127 SPE_BUILTIN_EVLHHOUSPLAT,
3129 SPE_BUILTIN_EVLWHOS,
3130 SPE_BUILTIN_EVLWHOU,
3131 SPE_BUILTIN_EVLWHSPLAT,
3132 SPE_BUILTIN_EVLWWSPLAT,
3135 SPE_BUILTIN_EVSRWIS,
3136 SPE_BUILTIN_EVSRWIU,
3140 SPE_BUILTIN_EVSTWHE,
3141 SPE_BUILTIN_EVSTWHO,
3142 SPE_BUILTIN_EVSTWWE,
3143 SPE_BUILTIN_EVSTWWO,
3144 SPE_BUILTIN_EVSUBIFW,
3147 SPE_BUILTIN_EVCMPEQ,
3148 SPE_BUILTIN_EVCMPGTS,
3149 SPE_BUILTIN_EVCMPGTU,
3150 SPE_BUILTIN_EVCMPLTS,
3151 SPE_BUILTIN_EVCMPLTU,
3152 SPE_BUILTIN_EVFSCMPEQ,
3153 SPE_BUILTIN_EVFSCMPGT,
3154 SPE_BUILTIN_EVFSCMPLT,
3155 SPE_BUILTIN_EVFSTSTEQ,
3156 SPE_BUILTIN_EVFSTSTGT,
3157 SPE_BUILTIN_EVFSTSTLT,
3159 /* EVSEL compares. */
3160 SPE_BUILTIN_EVSEL_CMPEQ,
3161 SPE_BUILTIN_EVSEL_CMPGTS,
3162 SPE_BUILTIN_EVSEL_CMPGTU,
3163 SPE_BUILTIN_EVSEL_CMPLTS,
3164 SPE_BUILTIN_EVSEL_CMPLTU,
3165 SPE_BUILTIN_EVSEL_FSCMPEQ,
3166 SPE_BUILTIN_EVSEL_FSCMPGT,
3167 SPE_BUILTIN_EVSEL_FSCMPLT,
3168 SPE_BUILTIN_EVSEL_FSTSTEQ,
3169 SPE_BUILTIN_EVSEL_FSTSTGT,
3170 SPE_BUILTIN_EVSEL_FSTSTLT,
3172 SPE_BUILTIN_EVSPLATFI,
3173 SPE_BUILTIN_EVSPLATI,
3174 SPE_BUILTIN_EVMWHSSMAA,
3175 SPE_BUILTIN_EVMWHSMFAA,
3176 SPE_BUILTIN_EVMWHSMIAA,
3177 SPE_BUILTIN_EVMWHUSIAA,
3178 SPE_BUILTIN_EVMWHUMIAA,
3179 SPE_BUILTIN_EVMWHSSFAN,
3180 SPE_BUILTIN_EVMWHSSIAN,
3181 SPE_BUILTIN_EVMWHSMFAN,
3182 SPE_BUILTIN_EVMWHSMIAN,
3183 SPE_BUILTIN_EVMWHUSIAN,
3184 SPE_BUILTIN_EVMWHUMIAN,
3185 SPE_BUILTIN_EVMWHGSSFAA,
3186 SPE_BUILTIN_EVMWHGSMFAA,
3187 SPE_BUILTIN_EVMWHGSMIAA,
3188 SPE_BUILTIN_EVMWHGUMIAA,
3189 SPE_BUILTIN_EVMWHGSSFAN,
3190 SPE_BUILTIN_EVMWHGSMFAN,
3191 SPE_BUILTIN_EVMWHGSMIAN,
3192 SPE_BUILTIN_EVMWHGUMIAN,
3193 SPE_BUILTIN_MTSPEFSCR,
3194 SPE_BUILTIN_MFSPEFSCR,
OSDN Git Service
