gcc/config.gcc

   1 # GCC target-specific configuration file.
   2 # Copyright 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007,
   3 # 2008, 2009 Free Software Foundation, Inc.
   4
   5 #This file is part of GCC.
   6
   7 #GCC is free software; you can redistribute it and/or modify it under
   8 #the terms of the GNU General Public License as published by the Free
   9 #Software Foundation; either version 3, or (at your option) any later
  10 #version.
  11
  12 #GCC is distributed in the hope that it will be useful, but WITHOUT
  13 #ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  14 #FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  15 #for more details.
  16
  17 #You should have received a copy of the GNU General Public License
  18 #along with GCC; see the file COPYING3.  If not see
  19 #<http://www.gnu.org/licenses/>.
  20
  21 # This is the GCC target-specific configuration file
  22 # where a configuration type is mapped to different system-specific
  23 # definitions and files.  This is invoked by the autoconf-generated
  24 # configure script.  Putting it in a separate shell file lets us skip
  25 # running autoconf when modifying target-specific information.
  26
  27 # When you change the cases in the OS or target switches, consider
  28 # updating ../libgcc/config.host also.
  29
  30 # This file switches on the shell variable ${target}, and also uses the
  31 # following shell variables:
  32 #
  33 #  with_*               Various variables as set by configure.
  34 #
  35 #  enable_threads       Either the name, yes or no depending on whether
  36 #                       threads support was requested.
  37 #
  38 #  default_use_cxa_atexit
  39 #                         The default value for the $enable___cxa_atexit
  40 #                       variable.  enable___cxa_atexit needs to be set to
  41 #                       "yes" for the correct operation of C++ destructors
  42 #                       but it relies upon the presence of a non-standard C
  43 #                       library function called __cxa_atexit.
  44 #                         Since not all C libraries provide __cxa_atexit the
  45 #                       default value of $default_use_cxa_atexit is set to
  46 #                       "no" except for targets which are known to be OK.
  47 #
  48 #  gas_flag             Either yes or no depending on whether GNU as was
  49 #                       requested.
  50 #
  51 #  gnu_ld_flag          Either yes or no depending on whether GNU ld was
  52 #                       requested.
  53
  54 # This file sets the following shell variables for use by the
  55 # autoconf-generated configure script:
  56 #
  57 #  cpu_type             The name of the cpu, if different from the first
  58 #                       chunk of the canonical target name.
  59 #
  60 #  tm_defines           List of target macros to define for all compilations.
  61 #
  62 #  tm_file              A list of target macro files, if different from
  63 #                       "$cpu_type/$cpu_type.h". Usually it's constructed
  64 #                       per target in a way like this:
  65 #                       tm_file="${tm_file} dbxelf.h elfos.h svr4.h ${cpu_type.h}/elf.h"
  66 #                       Note that the preferred order is:
  67 #                       - specific target header "${cpu_type}/${cpu_type.h}"
  68 #                       - generic headers like dbxelf.h elfos.h, etc.
  69 #                       - specializing target headers like ${cpu_type.h}/elf.h
  70 #                       This helps to keep OS specific stuff out of the CPU
  71 #                       defining header ${cpu_type}/${cpu_type.h}.
  72 #
  73 #                       It is possible to include automatically-generated
  74 #                       build-directory files by prefixing them with "./".
  75 #                       All other files should relative to $srcdir/config.
  76 #
  77 #  tm_p_file            Location of file with declarations for functions
  78 #                       in $out_file.
  79 #
  80 #  out_file             The name of the machine description C support
  81 #                       file, if different from "$cpu_type/$cpu_type.c".
  82 #
  83 #  md_file              The name of the machine-description file, if
  84 #                       different from "$cpu_type/$cpu_type.md".
  85 #
  86 #  tmake_file           A list of machine-description-specific
  87 #                       makefile-fragments, if different from
  88 #                       "$cpu_type/t-$cpu_type".
  89 #
  90 #  extra_modes          The name of the file containing a list of extra
  91 #                       machine modes, if necessary and different from
  92 #                       "$cpu_type/$cpu_type-modes.def".
  93 #
  94 #  extra_objs           List of extra objects that should be linked into
  95 #                       the compiler proper (cc1, cc1obj, cc1plus)
  96 #                       depending on target.
  97 #
  98 #  extra_gcc_objs       List of extra objects that should be linked into
  99 #                       the compiler driver (gcc) depending on target.
 100 #
 101 #  extra_headers        List of used header files from the directory
 102 #                       config/${cpu_type}.
 103 #
 104 #  use_gcc_tgmath       If set, add tgmath.h to the list of used header
 105 #                       files.
 106 #
 107 #  use_gcc_stdint       If "wrap", install a version of stdint.h that
 108 #                       wraps the system's copy for hosted compilations;
 109 #                       if "provide", provide a version of systems without
 110 #                       such a system header; otherwise "none", do not
 111 #                       provide such a header at all.
 112 #
 113 #  extra_passes         List of extra executables compiled for this target
 114 #                       machine, used for compiling from source to object.
 115 #
 116 #  extra_parts          List of extra object files that should be compiled
 117 #                       for this target machine.
 118 #
 119 #  extra_programs       Like extra_passes, but these are used when linking.
 120 #
 121 #  extra_options        List of target-dependent .opt files.
 122 #
 123 #  c_target_objs        List of extra target-dependent objects that be
 124 #                       linked into the C compiler only.
 125 #
 126 #  cxx_target_objs      List of extra target-dependent objects that be
 127 #                       linked into the C++ compiler only.
 128 #
 129 #  fortran_target_objs  List of extra target-dependent objects that be
 130 #                       linked into the fortran compiler only.
 131 #
 132 #  target_gtfiles       List of extra source files with type information.
 133 #
 134 #  xm_defines           List of macros to define when compiling for the
 135 #                       target machine.
 136 #
 137 #  xm_file              List of files to include when compiling for the
 138 #                       target machine.
 139 #
 140 #  use_collect2         Set to yes or no, depending on whether collect2
 141 #                       will be used.
 142 #
 143 #  target_cpu_default   Set to override the default target model.
 144 #
 145 #  gdb_needs_out_file_path
 146 #                       Set to yes if gdb needs a dir command with
 147 #                       `dirname $out_file`.
 148 #
 149 #  thread_file          Set to control which thread package to use.
 150 #
 151 #  gas                  Set to yes or no depending on whether the target
 152 #                       system normally uses GNU as.
 153 #
 154 #  need_64bit_hwint     Set to yes if HOST_WIDE_INT must be 64 bits wide
 155 #                       for this target.  This is true if this target
 156 #                       supports "long" or "wchar_t" wider than 32 bits,
 157 #                       or BITS_PER_WORD is wider than 32 bits.
 158 #                       The setting made here must match the one made in
 159 #                       other locations such as libcpp/configure.ac
 160 #
 161 #  configure_default_options
 162 #                       Set to an initializer for configure_default_options
 163 #                       in configargs.h, based on --with-cpu et cetera.
 164
 165 # The following variables are used in each case-construct to build up the
 166 # outgoing variables:
 167 #
 168 #  gnu_ld               Set to yes or no depending on whether the target
 169 #                       system normally uses GNU ld.
 170
 171 out_file=
 172 tmake_file=
 173 extra_headers=
 174 use_gcc_tgmath=yes
 175 use_gcc_stdint=none
 176 extra_passes=
 177 extra_parts=
 178 extra_programs=
 179 extra_objs=
 180 extra_gcc_objs=
 181 extra_options=
 182 c_target_objs=
 183 cxx_target_objs=
 184 fortran_target_objs=
 185 tm_defines=
 186 xm_defines=
 187 # Set this to force installation and use of collect2.
 188 use_collect2=
 189 # Set this to override the default target model.
 190 target_cpu_default=
 191 # Set this if gdb needs a dir command with `dirname $out_file`
 192 gdb_needs_out_file_path=
 193 # Set this to control which thread package will be used.
 194 thread_file=
 195 # Reinitialize these from the flag values every loop pass, since some
 196 # configure entries modify them.
 197 gas="$gas_flag"
 198 gnu_ld="$gnu_ld_flag"
 199 default_use_cxa_atexit=no
 200 target_gtfiles=
 201 need_64bit_hwint=
 202
 203 # Don't carry these over build->host->target.  Please.
 204 xm_file=
 205 md_file=
 206
 207 # Obsolete configurations.
 208 #case ${target} in
 209 # )
 210 #    if test "x$enable_obsolete" != xyes; then
 211 #      echo "*** Configuration ${target} is obsolete." >&2
 212 #      echo "*** Specify --enable-obsolete to build it anyway." >&2
 213 #      echo "*** Support will be REMOVED in the next major release of GCC," >&2
 214 #      echo "*** unless a maintainer comes forward." >&2
 215 #      exit 1
 216 #    fi;;
 217 #esac
 218
 219 # Unsupported targets list.  Do not put an entry in this list unless
 220 # it would otherwise be caught by a more permissive pattern.  The list
 221 # should be in alphabetical order.
 222 case ${target} in
 223    i[34567]86-go32-*                    \
 224  | i[34567]86-*-go32*                   \
 225  | mips64orion*-*-rtems*                \
 226  | pdp11-*-bsd                          \
 227  | sparc-hal-solaris2*                  \
 228  | thumb-*-*                            \
 229  | *-*-linux*aout*                      \
 230  | *-*-linux*coff*                      \
 231  | *-*-linux*libc1*                     \
 232  | *-*-linux*oldld*                     \
 233  | *-*-rtemsaout*                       \
 234  | *-*-rtemscoff*                       \
 235  | *-*-solaris2.[0-6]                   \
 236  | *-*-solaris2.[0-6].*                 \
 237  | *-*-sysv*            \
 238  | vax-*-vms*                           \
 239  )
 240         echo "*** Configuration ${target} not supported" 1>&2
 241         exit 1
 242         ;;
 243 esac
 244
 245 # Set default cpu_type, tm_file, tm_p_file and xm_file so it can be
 246 # updated in each machine entry.  Also set default extra_headers for some
 247 # machines.
 248 tm_p_file=
 249 cpu_type=`echo ${target} | sed 's/-.*$//'`
 250 cpu_is_64bit=
 251 case ${target} in
 252 m32c*-*-*)
 253         cpu_type=m32c
 254         tmake_file=m32c/t-m32c
 255         ;;
 256 alpha*-*-*)
 257         cpu_type=alpha
 258         need_64bit_hwint=yes
 259         ;;
 260 am33_2.0-*-linux*)
 261         cpu_type=mn10300
 262         ;;
 263 arm*-*-*)
 264         cpu_type=arm
 265         extra_headers="mmintrin.h arm_neon.h"
 266         c_target_objs="arm-c.o"
 267         cxx_target_objs="arm-c.o"
 268         ;;
 269 bfin*-*)
 270         cpu_type=bfin
 271         ;;
 272 crisv32-*)
 273         cpu_type=cris
 274         ;;
 275 frv*)   cpu_type=frv
 276         ;;
 277 moxie*) cpu_type=moxie
 278         ;;
 279 fido-*-*)
 280         cpu_type=m68k
 281         extra_headers=math-68881.h
 282         ;;
 283 i[34567]86-*-*)
 284         cpu_type=i386
 285         c_target_objs="i386-c.o"
 286         cxx_target_objs="i386-c.o"
 287         extra_headers="cpuid.h mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
 288                        pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h
 289                        nmmintrin.h bmmintrin.h fma4intrin.h wmmintrin.h
 290                        immintrin.h x86intrin.h avxintrin.h xopintrin.h
 291                        ia32intrin.h cross-stdarg.h lwpintrin.h"
 292         ;;
 293 x86_64-*-*)
 294         cpu_type=i386
 295         c_target_objs="i386-c.o"
 296         cxx_target_objs="i386-c.o"
 297         extra_headers="cpuid.h mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
 298                        pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h
 299                        nmmintrin.h bmmintrin.h fma4intrin.h wmmintrin.h
 300                        immintrin.h x86intrin.h avxintrin.h xopintrin.h
 301                        ia32intrin.h cross-stdarg.h lwpintrin.h"
 302         need_64bit_hwint=yes
 303         ;;
 304 ia64-*-*)
 305         extra_headers=ia64intrin.h
 306         need_64bit_hwint=yes
 307         ;;
 308 hppa*-*-*)
 309         cpu_type=pa
 310         ;;
 311 m32r*-*-*)
 312         cpu_type=m32r
 313         ;;
 314 m68k-*-*)
 315         extra_headers=math-68881.h
 316         ;;
 317 mips*-*-*)
 318         cpu_type=mips
 319         need_64bit_hwint=yes
 320         extra_headers="loongson.h"
 321         ;;
 322 picochip-*-*)
 323         cpu_type=picochip
 324         ;;
 325 powerpc*-*-*)
 326         cpu_type=rs6000
 327         extra_headers="ppc-asm.h altivec.h spe.h ppu_intrinsics.h paired.h spu2vmx.h vec_types.h si2vmx.h"
 328         need_64bit_hwint=yes
 329         case x$with_cpu in
 330             xpowerpc64|xdefault64|x6[23]0|x970|xG5|xpower[34567]|xpower6x|xrs64a|xcell|xa2)
 331                 cpu_is_64bit=yes
 332                 ;;
 333         esac
 334         ;;
 335 rs6000*-*-*)
 336         need_64bit_hwint=yes
 337         ;;
 338 score*-*-*)
 339         cpu_type=score
 340         ;;
 341 sparc*-*-*)
 342         cpu_type=sparc
 343         need_64bit_hwint=yes
 344         ;;
 345 spu*-*-*)
 346         cpu_type=spu
 347         need_64bit_hwint=yes
 348         ;;
 349 s390*-*-*)
 350         cpu_type=s390
 351         need_64bit_hwint=yes
 352         ;;
 353 # Note the 'l'; we need to be able to match e.g. "shle" or "shl".
 354 sh[123456789lbe]*-*-* | sh-*-*)
 355         cpu_type=sh
 356         need_64bit_hwint=yes
 357         ;;
 358 esac
 359
 360 tm_file=${cpu_type}/${cpu_type}.h
 361 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-protos.h
 362 then
 363         tm_p_file=${cpu_type}/${cpu_type}-protos.h
 364 fi
 365 extra_modes=
 366 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-modes.def
 367 then
 368         extra_modes=${cpu_type}/${cpu_type}-modes.def
 369 fi
 370 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}.opt
 371 then
 372         extra_options="${extra_options} ${cpu_type}/${cpu_type}.opt"
 373 fi
 374
 375 case ${target} in
 376 i[34567]86-*-*)
 377         if test "x$enable_cld" = xyes; then
 378                 tm_defines="${tm_defines} USE_IX86_CLD=1"
 379         fi
 380         tm_file="vxworks-dummy.h ${tm_file}"
 381         ;;
 382 x86_64-*-*)
 383         tm_file="i386/biarch64.h ${tm_file}"
 384         if test "x$enable_cld" = xyes; then
 385                 tm_defines="${tm_defines} USE_IX86_CLD=1"
 386         fi
 387         tm_file="vxworks-dummy.h ${tm_file}"
 388         ;;
 389 esac
 390
 391 # On a.out targets, we need to use collect2.
 392 case ${target} in
 393 *-*-*aout*)
 394         use_collect2=yes
 395         ;;
 396 esac
 397
 398 # Common parts for widely ported systems.
 399 case ${target} in
 400 *-*-darwin*)
 401   tm_file="${tm_file} darwin.h"
 402   case ${target} in
 403   *-*-darwin9*)
 404     tm_file="${tm_file} darwin9.h"
 405     ;;
 406   *-*-darwin[12][0-9]*)
 407     tm_file="${tm_file} darwin9.h darwin10.h"
 408     ;;
 409   esac
 410   tm_file="${tm_file} ${cpu_type}/darwin.h"
 411   tm_p_file="${tm_p_file} darwin-protos.h"
 412   tmake_file="t-darwin ${cpu_type}/t-darwin t-slibgcc-darwin"
 413   target_gtfiles="\$(srcdir)/config/darwin.c"
 414   extra_options="${extra_options} darwin.opt"
 415   c_target_objs="${c_target_objs} darwin-c.o"
 416   cxx_target_objs="${cxx_target_objs} darwin-c.o"
 417   fortran_target_objs="darwin-f.o"
 418   extra_objs="darwin.o"
 419   extra_gcc_objs="darwin-driver.o"
 420   default_use_cxa_atexit=yes
 421   use_gcc_stdint=wrap
 422   case ${enable_threads} in
 423     "" | yes | posix) thread_file='posix' ;;
 424   esac
 425   ;;
 426 *-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*)
 427   # This is the place-holder for the generic a.out configuration
 428   # of FreeBSD.  No actual configuration resides here since
 429   # there was only ever a bare-bones ix86 configuration for
 430   # a.out and it exists solely in the machine-specific section.
 431   # This place-holder must exist to avoid dropping into
 432   # the generic ELF configuration of FreeBSD (i.e. it must be
 433   # ordered before that section).
 434   ;;
 435 *-*-freebsd*)
 436   # This is the generic ELF configuration of FreeBSD.  Later
 437   # machine-specific sections may refine and add to this
 438   # configuration.
 439   #
 440   # Due to tm_file entry ordering issues that vary between cpu
 441   # architectures, we only define fbsd_tm_file to allow the
 442   # machine-specific section to dictate the final order of all
 443   # entries of tm_file with the minor exception that components
 444   # of the tm_file set here will always be of the form:
 445   #
 446   # freebsd<version_number>.h [freebsd-<conf_option>.h ...] freebsd-spec.h freebsd.h
 447   #
 448   # The machine-specific section should not tamper with this
 449   # ordering but may order all other entries of tm_file as it
 450   # pleases around the provided core setting.
 451   gas=yes
 452   gnu_ld=yes
 453   extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
 454   fbsd_major=`echo ${target} | sed -e 's/.*freebsd//g' | sed -e 's/\..*//g'`
 455   tm_defines="${tm_defines} FBSD_MAJOR=${fbsd_major}"
 456   tmake_file="t-slibgcc-elf-ver t-freebsd"
 457   case ${enable_threads} in
 458     no)
 459       fbsd_tm_file="${fbsd_tm_file} freebsd-nthr.h"
 460       ;;
 461     "" | yes | posix)
 462       thread_file='posix'
 463       tmake_file="${tmake_file} t-freebsd-thread"
 464       # Before 5.0, FreeBSD can't bind shared libraries to -lc
 465       # when "optionally" threaded via weak pthread_* checks.
 466       case ${target} in
 467         *-*-freebsd[34] | *-*-freebsd[34].*)
 468           tmake_file="${tmake_file} t-slibgcc-nolc-override"
 469           ;;
 470       esac
 471       ;;
 472     *)
 473       echo 'Unknown thread configuration for FreeBSD'
 474       exit 1
 475       ;;
 476   esac
 477   fbsd_tm_file="${fbsd_tm_file} freebsd-spec.h freebsd.h freebsd-stdint.h"
 478   case ${target} in
 479     *-*-freebsd[345].*)
 480       :;;
 481     *)
 482       default_use_cxa_atexit=yes;;
 483   esac
 484   # need_64bit_hwint=yes # system compiler has this for all arch!
 485   use_gcc_stdint=wrap
 486   ;;
 487 *-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu | *-*-gnu* | *-*-kopensolaris*-gnu)
 488   extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
 489   gas=yes
 490   gnu_ld=yes
 491   case ${enable_threads} in
 492     "" | yes | posix) thread_file='posix' ;;
 493   esac
 494   tmake_file="t-slibgcc-elf-ver t-linux"
 495   case $target in
 496     *-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu | *-*-kopensolaris*-gnu)
 497       :;;
 498     *-*-gnu*)
 499       tmake_file="$tmake_file t-gnu";;
 500   esac
 501   # glibc / uclibc switch.  uclibc isn't usable for GNU/Hurd and neither for
 502   # GNU/k*BSD.
 503   case $target in
 504     *linux*)
 505       extra_options="$extra_options linux.opt";;
 506     *)
 507       tm_defines="$tm_defines OPTION_GLIBC=1";;
 508   esac
 509   case ${target} in
 510     *-*-*uclibc*)
 511       tm_defines="${tm_defines} UCLIBC_DEFAULT=1"
 512       ;;
 513     *)
 514       tm_defines="${tm_defines} UCLIBC_DEFAULT=0"
 515       ;;
 516   esac
 517   # Assume that glibc or uClibc are being used and so __cxa_atexit is provided.
 518   default_use_cxa_atexit=yes
 519   use_gcc_tgmath=no
 520   use_gcc_stdint=wrap
 521   ;;
 522 *-*-netbsd*)
 523   tmake_file="t-slibgcc-elf-ver t-libc-ok t-netbsd t-libgcc-pic"
 524   gas=yes
 525   gnu_ld=yes
 526
 527   # NetBSD 2.0 and later get POSIX threads enabled by default.
 528   # Allow them to be explicitly enabled on any other version.
 529   case ${enable_threads} in
 530     "")
 531       case ${target} in
 532         *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
 533           thread_file='posix'
 534           tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
 535           ;;
 536       esac
 537       ;;
 538     yes | posix)
 539       thread_file='posix'
 540       tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
 541       ;;
 542   esac
 543
 544   # NetBSD 1.7 and later are set up to use GCC's crtstuff for
 545   # ELF configurations.  We will clear extra_parts in the
 546   # a.out configurations.
 547   case ${target} in
 548     *-*-netbsd*1.[7-9]* | *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
 549       extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
 550       ;;
 551   esac
 552
 553   # NetBSD 2.0 and later provide __cxa_atexit(), which we use by
 554   # default (unless overridden by --disable-__cxa_atexit).
 555   case ${target} in
 556     *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
 557       default_use_cxa_atexit=yes
 558       ;;
 559   esac
 560   ;;
 561 *-*-openbsd*)
 562   tmake_file="t-libc-ok t-openbsd t-libgcc-pic"
 563   case ${enable_threads} in
 564     yes)
 565       thread_file='posix'
 566       tmake_file="${tmake_file} t-openbsd-thread"
 567       ;;
 568   esac
 569   case ${target} in
 570     *-*-openbsd2.*|*-*-openbsd3.[012])
 571       tm_defines="${tm_defines} HAS_LIBC_R=1" ;;
 572   esac
 573   ;;
 574 *-*-rtems*)
 575   case ${enable_threads} in
 576     yes) thread_file='rtems' ;;
 577   esac
 578   use_gcc_stdint=wrap
 579   ;;
 580 *-*-uclinux*)
 581   use_gcc_stdint=wrap
 582   ;;
 583 *-*-vxworks*)
 584   tmake_file=t-vxworks
 585   xm_defines=POSIX
 586   extra_options="${extra_options} vxworks.opt"
 587   extra_objs=vxworks.o
 588   case ${enable_threads} in
 589     no) ;;
 590     "" | yes | vxworks) thread_file='vxworks' ;;
 591     *) echo 'Unknown thread configuration for VxWorks'; exit 1 ;;
 592   esac
 593   ;;
 594 *-*-elf)
 595   # Assume that newlib is being used and so __cxa_atexit is provided.
 596   default_use_cxa_atexit=yes
 597   use_gcc_stdint=wrap
 598   ;;
 599 esac
 600
 601 case ${target} in
 602 # Support site-specific machine types.
 603 *local*)
 604         rest=`echo ${target} | sed -e "s/$cpu_type-//"`
 605         tm_file=${cpu_type}/$rest.h
 606         if test -f $srcdir/config/${cpu_type}/xm-$rest.h
 607         then xm_file=${cpu_type}/xm-$rest.h
 608         fi
 609         if test -f $srcdir/config/${cpu_type}/t-$rest
 610         then tmake_file=${cpu_type}/t-$rest
 611         fi
 612         ;;
 613 alpha*-*-linux*)
 614         tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h glibc-stdint.h"
 615         target_cpu_default="MASK_GAS"
 616         tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee alpha/t-linux"
 617         ;;
 618 alpha*-*-gnu*)
 619         tm_file="$tm_file alpha/elf.h alpha/linux.h alpha/linux-elf.h gnu.h glibc-stdint.h alpha/gnu.h"
 620         target_cpu_default="MASK_GAS"
 621         tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
 622         ;;
 623 alpha*-*-freebsd*)
 624         tm_file="${tm_file} ${fbsd_tm_file} alpha/elf.h alpha/freebsd.h"
 625         target_cpu_default="MASK_GAS"
 626         tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
 627         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
 628         ;;
 629 alpha*-*-netbsd*)
 630         tm_file="${tm_file} netbsd.h alpha/elf.h netbsd-elf.h alpha/netbsd.h"
 631         target_cpu_default="MASK_GAS"
 632         tmake_file="${tmake_file} alpha/t-alpha alpha/t-ieee"
 633         ;;
 634 alpha*-*-openbsd*)
 635         tm_defines="${tm_defines} OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_FUNCTION_SIZE OBSD_HAS_DECLARE_OBJECT"
 636         tm_file="alpha/alpha.h alpha/elf.h openbsd.h openbsd-stdint.h alpha/openbsd.h openbsd-libpthread.h"
 637         # default x-alpha is only appropriate for dec-osf.
 638         target_cpu_default="MASK_GAS"
 639         tmake_file="${tmake_file} alpha/t-alpha alpha/t-ieee"
 640         ;;
 641 alpha*-dec-osf[45]*)
 642         if test x$stabs = xyes
 643         then
 644                 tm_file="${tm_file} dbx.h"
 645         fi
 646         if test x$gas != xyes
 647         then
 648                 extra_passes="mips-tfile mips-tdump"
 649         fi
 650         use_collect2=yes
 651         tmake_file="alpha/t-alpha alpha/t-ieee alpha/t-crtfm alpha/t-osf4"
 652         tm_file="${tm_file} alpha/osf.h"
 653         extra_headers=va_list.h
 654         case ${target} in
 655           *-*-osf4*)
 656             # Define TARGET_SUPPORT_ARCH except on 4.0a.
 657             case ${target} in
 658                 *-*-osf4.0a) ;;
 659                 *) tm_defines="${tm_defines} TARGET_SUPPORT_ARCH=1"
 660             esac
 661             ;;
 662           *-*-osf5*)
 663             tm_file="${tm_file} alpha/osf5.h"
 664             tm_defines="${tm_defines} TARGET_SUPPORT_ARCH=1"
 665             ;;
 666         esac
 667         case ${enable_threads} in
 668           "" | yes | posix)
 669             thread_file='posix'
 670             tmake_file="${tmake_file} alpha/t-osf-pthread"
 671             ;;
 672         esac
 673         ;;
 674 alpha64-dec-*vms*)
 675         tm_file="${tm_file} alpha/vms.h alpha/vms64.h"
 676         xm_file="alpha/xm-vms.h vms/xm-vms64.h"
 677         tmake_file="alpha/t-alpha vms/t-vms vms/t-vms64 alpha/t-vms alpha/t-ieee"
 678         xmake_file=vms/x-vms
 679         exeext=.exe
 680         install_headers_dir=install-headers-cp
 681         extra_options="${extra_options} vms/vms.opt"
 682         ;;
 683 alpha*-dec-*vms*)
 684         tm_file="${tm_file} alpha/vms.h"
 685         xm_file="alpha/xm-vms.h"
 686         tmake_file="alpha/t-alpha vms/t-vms alpha/t-vms alpha/t-ieee"
 687         xmake_file=vms/x-vms
 688         exeext=.exe
 689         install_headers_dir=install-headers-cp
 690         extra_options="${extra_options} vms/vms.opt"
 691         ;;
 692 arc-*-elf*)
 693         tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file}"
 694         extra_parts="crtinit.o crtfini.o"
 695         ;;
 696 arm-wrs-vxworks)
 697         tm_file="elfos.h arm/elf.h arm/aout.h ${tm_file} vx-common.h vxworks.h arm/vxworks.h"
 698         tmake_file="${tmake_file} arm/t-arm arm/t-vxworks"
 699         ;;
 700 arm*-*-freebsd*)
 701         tm_file="dbxelf.h elfos.h ${fbsd_tm_file} arm/elf.h arm/aout.h arm/freebsd.h arm/arm.h"
 702         tmake_file="${tmake_file} arm/t-arm arm/t-strongarm-elf"
 703         ;;
 704 arm*-*-netbsdelf*)
 705         tm_file="dbxelf.h elfos.h netbsd.h netbsd-elf.h arm/elf.h arm/aout.h arm/arm.h arm/netbsd-elf.h"
 706         tmake_file="${tmake_file} arm/t-arm arm/t-netbsd"
 707         ;;
 708 arm*-*-netbsd*)
 709         tm_file="arm/aout.h arm/arm.h netbsd.h netbsd-aout.h arm/netbsd.h"
 710         tmake_file="t-netbsd arm/t-arm arm/t-netbsd"
 711         extra_parts=""
 712         use_collect2=yes
 713         ;;
 714 arm*-*-linux*)                  # ARM GNU/Linux with ELF
 715         tm_file="dbxelf.h elfos.h linux.h glibc-stdint.h arm/elf.h arm/linux-gas.h arm/linux-elf.h"
 716         case $target in
 717         arm*b-*)
 718                 tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
 719                 ;;
 720         esac
 721         tmake_file="${tmake_file} t-linux arm/t-arm"
 722         case ${target} in
 723         arm*-*-linux-*eabi)
 724             tm_file="$tm_file arm/bpabi.h arm/linux-eabi.h"
 725             tmake_file="$tmake_file arm/t-arm-elf arm/t-bpabi arm/t-linux-eabi t-slibgcc-libgcc"
 726             # The BPABI long long divmod functions return a 128-bit value in
 727             # registers r0-r3.  Correctly modeling that requires the use of
 728             # TImode.
 729             need_64bit_hwint=yes
 730             # The EABI requires the use of __cxa_atexit.
 731             default_use_cxa_atexit=yes
 732             ;;
 733         *)
 734             tmake_file="$tmake_file arm/t-linux"
 735             ;;
 736         esac
 737         tm_file="$tm_file arm/aout.h arm/arm.h"
 738         tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
 739         ;;
 740 arm*-*-uclinux*)                # ARM ucLinux
 741         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/linux-gas.h arm/uclinux-elf.h glibc-stdint.h"
 742         tmake_file="arm/t-arm arm/t-arm-elf"
 743         case ${target} in
 744         arm*-*-uclinux*eabi)
 745             tm_file="$tm_file arm/bpabi.h arm/uclinux-eabi.h"
 746             tmake_file="$tmake_file arm/t-bpabi"
 747             # The BPABI long long divmod functions return a 128-bit value in
 748             # registers r0-r3.  Correctly modeling that requires the use of
 749             # TImode.
 750             need_64bit_hwint=yes
 751             # The EABI requires the use of __cxa_atexit.
 752             default_use_cxa_atexit=yes
 753         esac
 754         tm_file="$tm_file arm/aout.h arm/arm.h"
 755         tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
 756         ;;
 757 arm*-*-ecos-elf)
 758         tm_file="dbxelf.h elfos.h newlib-stdint.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/ecos-elf.h"
 759         tmake_file="arm/t-arm arm/t-arm-elf"
 760         tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
 761         ;;
 762 arm*-*-eabi* | arm*-*-symbianelf* )
 763         # The BPABI long long divmod functions return a 128-bit value in
 764         # registers r0-r3.  Correctly modeling that requires the use of
 765         # TImode.
 766         need_64bit_hwint=yes
 767         default_use_cxa_atexit=yes
 768         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/bpabi.h"
 769         tmake_file="arm/t-arm arm/t-arm-elf"
 770         case ${target} in
 771         arm*-*-eabi*)
 772           tm_file="$tm_file arm/eabi.h newlib-stdint.h"
 773           tmake_file="${tmake_file} arm/t-bpabi"
 774           extra_options="${extra_options} arm/eabi.opt"
 775           use_gcc_stdint=wrap
 776           ;;
 777         arm*-*-symbianelf*)
 778           tm_file="${tm_file} arm/symbian.h"
 779           # We do not include t-bpabi for Symbian OS because the system
 780           # provides its own implementation of the BPABI functions.
 781           tmake_file="${tmake_file} arm/t-symbian"
 782           ;;
 783         esac
 784         tm_file="${tm_file} arm/aout.h arm/arm.h"
 785         tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
 786         ;;
 787 arm*-*-rtems*)
 788         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/rtems-elf.h rtems.h newlib-stdint.h"
 789         tmake_file="arm/t-arm arm/t-arm-elf t-rtems arm/t-rtems"
 790         tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
 791         ;;
 792 arm*-*-elf)
 793         tm_file="dbxelf.h elfos.h newlib-stdint.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
 794         tmake_file="arm/t-arm arm/t-arm-elf"
 795         tmake_file="${tmake_file} arm/t-arm-softfp soft-fp/t-softfp"
 796         ;;
 797 arm*-wince-pe*)
 798         tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h arm/wince-pe.h"
 799         tmake_file="arm/t-arm arm/t-wince-pe"
 800         extra_options="${extra_options} arm/pe.opt"
 801         extra_objs="pe.o"
 802         ;;
 803 arm-*-pe*)
 804         tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h newlib-stdint.h"
 805         tmake_file="arm/t-arm arm/t-pe"
 806         use_gcc_stdint=wrap
 807         extra_options="${extra_options} arm/pe.opt"
 808         extra_objs="pe.o"
 809         ;;
 810 avr-*-rtems*)
 811         tm_file="avr/avr.h dbxelf.h avr/rtems.h rtems.h newlib-stdint.h"
 812         tmake_file="avr/t-avr t-rtems avr/t-rtems"
 813         extra_gcc_objs="driver-avr.o avr-devices.o"
 814         extra_objs="avr-devices.o"
 815         ;;
 816 avr-*-*)
 817         tm_file="avr/avr.h dbxelf.h newlib-stdint.h"
 818         use_gcc_stdint=wrap
 819         extra_gcc_objs="driver-avr.o avr-devices.o"
 820         extra_objs="avr-devices.o"
 821         ;;
 822 bfin*-elf*)
 823         tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h bfin/elf.h"
 824         tmake_file=bfin/t-bfin-elf
 825         use_collect2=no
 826         ;;
 827 bfin*-uclinux*)
 828         tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h linux.h glibc-stdint.h bfin/uclinux.h"
 829         tmake_file=bfin/t-bfin-uclinux
 830         tm_defines="${tm_defines} UCLIBC_DEFAULT=1"
 831         extra_options="${extra_options} linux.opt"
 832         use_collect2=no
 833         ;;
 834 bfin*-linux-uclibc*)
 835         tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h linux.h glibc-stdint.h bfin/linux.h ./linux-sysroot-suffix.h"
 836         tmake_file="t-slibgcc-elf-ver bfin/t-bfin-linux"
 837         extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
 838         use_collect2=no
 839         ;;
 840 bfin*-rtems*)
 841         tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h bfin/rtems.h rtems.h"
 842         tmake_file="bfin/t-bfin t-rtems bfin/t-rtems"
 843         ;;
 844 bfin*-*)
 845         tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h bfin/elf.h"
 846         tmake_file=bfin/t-bfin
 847         use_collect2=no
 848         use_gcc_stdint=wrap
 849         ;;
 850 crisv32-*-elf | crisv32-*-none)
 851         tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
 852         tmake_file="cris/t-cris"
 853         target_cpu_default=32
 854         gas=yes
 855         extra_options="${extra_options} cris/elf.opt"
 856         use_gcc_stdint=wrap
 857         ;;
 858 cris-*-elf | cris-*-none)
 859         tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
 860         tmake_file="cris/t-cris cris/t-elfmulti"
 861         gas=yes
 862         extra_options="${extra_options} cris/elf.opt"
 863         use_gcc_stdint=wrap
 864         ;;
 865 crisv32-*-linux* | cris-*-linux*)
 866         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} linux.h glibc-stdint.h cris/linux.h"
 867         # We need to avoid using t-linux, so override default tmake_file
 868         tmake_file="cris/t-cris t-slibgcc-elf-ver cris/t-linux"
 869         extra_options="${extra_options} cris/linux.opt"
 870         case $target in
 871           cris-*-*)
 872                 target_cpu_default=10
 873                 ;;
 874           crisv32-*-*)
 875                 target_cpu_default=32
 876                 ;;
 877         esac
 878         ;;
 879 crx-*-elf)
 880         tm_file="elfos.h newlib-stdint.h ${tm_file}"
 881         extra_parts="crtbegin.o crtend.o"
 882         use_collect2=no
 883         ;;
 884 fr30-*-elf)
 885         tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file}"
 886         tmake_file=fr30/t-fr30
 887         extra_parts="crti.o crtn.o crtbegin.o crtend.o"
 888         ;;
 889 frv-*-elf)
 890         tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file} frv/frv-abi.h"
 891         tmake_file=frv/t-frv
 892         ;;
 893 frv-*-*linux*)
 894         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} \
 895                  linux.h glibc-stdint.h frv/linux.h frv/frv-abi.h"
 896         tmake_file="${tmake_file} frv/t-frv frv/t-linux"
 897         ;;
 898 moxie-*-elf)
 899         gas=yes
 900         gnu_ld=yes
 901         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
 902         extra_parts="crti.o crtn.o crtbegin.o crtend.o"
 903         tmake_file="${tmake_file} moxie/t-moxie moxie/t-moxie-softfp soft-fp/t-softfp"
 904         ;;
 905 moxie-*-uclinux*)
 906         gas=yes
 907         gnu_ld=yes
 908         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} linux.h glibc-stdint.h moxie/uclinux.h"
 909         extra_parts="crti.o crtn.o crtbegin.o crtend.o"
 910         tmake_file="${tmake_file} moxie/t-moxie moxie/t-moxie-softfp soft-fp/t-softfp"
 911         tm_defines="${tm_defines} UCLIBC_DEFAULT=1"
 912         extra_options="${extra_options} linux.opt"
 913         ;;
 914 h8300-*-rtems*)
 915         tmake_file="h8300/t-h8300 h8300/t-elf t-rtems h8300/t-rtems"
 916         tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h h8300/rtems.h rtems.h newlib-stdint.h"
 917         ;;
 918 h8300-*-elf*)
 919         tmake_file="h8300/t-h8300 h8300/t-elf"
 920         tm_file="h8300/h8300.h dbxelf.h elfos.h newlib-stdint.h h8300/elf.h"
 921         ;;
 922 hppa*64*-*-linux*)
 923         target_cpu_default="MASK_PA_11|MASK_PA_20"
 924         tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h svr4.h linux.h \
 925                  glibc-stdint.h pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h \
 926                  pa/pa64-linux.h"
 927         tmake_file="${tmake_file} pa/t-linux64"
 928         gas=yes gnu_ld=yes
 929         need_64bit_hwint=yes
 930         ;;
 931 hppa*-*-linux*)
 932         target_cpu_default="MASK_PA_11|MASK_NO_SPACE_REGS"
 933         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h pa/pa-linux.h \
 934                  pa/pa32-regs.h pa/pa32-linux.h"
 935         tmake_file="${tmake_file} pa/t-linux"
 936         # Set the libgcc version number
 937         if test x$sjlj = x1; then
 938             tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
 939         else
 940             tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
 941         fi
 942         ;;
 943 # port not yet contributed.
 944 #hppa*-*-openbsd*)
 945 #       target_cpu_default="MASK_PA_11"
 946 #       ;;
 947 hppa[12]*-*-hpux10*)
 948         case ${target} in
 949         hppa1.1-*-* | hppa2*-*-*)
 950                 target_cpu_default="MASK_PA_11"
 951                 ;;
 952         esac
 953         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
 954                  pa/pa-hpux.h pa/pa-hpux10.h"
 955         extra_options="${extra_options} pa/pa-hpux.opt"
 956         case ${target} in
 957         *-*-hpux10.[1-9]*)
 958                 tm_file="${tm_file} pa/pa-hpux1010.h"
 959                 extra_options="${extra_options} pa/pa-hpux1010.opt"
 960                 ;;
 961         esac
 962         use_gcc_stdint=provide
 963         tm_file="${tm_file} hpux-stdint.h"
 964         tmake_file="pa/t-pa-hpux10 pa/t-pa-hpux pa/t-hpux-shlib"
 965         case ${enable_threads} in
 966           "")
 967             if test x$have_pthread_h = xyes ; then
 968               tmake_file="${tmake_file} pa/t-dce-thr"
 969             fi
 970             ;;
 971           yes | dce)
 972             tmake_file="${tmake_file} pa/t-dce-thr"
 973             ;;
 974         esac
 975         # Set the libgcc version number
 976         if test x$sjlj = x1; then
 977             tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
 978         else
 979             tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
 980         fi
 981         use_collect2=yes
 982         gas=yes
 983         ;;
 984 hppa*64*-*-hpux11*)
 985         target_cpu_default="MASK_PA_11|MASK_PA_20"
 986         if test x$gnu_ld = xyes
 987         then
 988                 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
 989         fi
 990         tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h \
 991                  pa/pa64-regs.h pa/pa-hpux.h pa/pa-hpux1010.h \
 992                  pa/pa-hpux11.h"
 993         case ${target} in
 994         *-*-hpux11.[1-9]*)
 995                 tm_file="${tm_file} pa/pa-hpux1111.h pa/pa-64.h pa/pa64-hpux.h"
 996                 extra_options="${extra_options} pa/pa-hpux1111.opt"
 997                 ;;
 998         *)
 999                 tm_file="${tm_file} pa/pa-64.h pa/pa64-hpux.h"
1000                 ;;
1001         esac
1002         extra_options="${extra_options} pa/pa-hpux.opt \
1003                        pa/pa-hpux1010.opt pa/pa64-hpux.opt"
1004         need_64bit_hwint=yes
1005         tmake_file="pa/t-pa64 pa/t-pa-hpux pa/t-hpux-shlib"
1006         # Set the libgcc version number
1007         if test x$sjlj = x1; then
1008             tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
1009         else
1010             tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
1011         fi
1012         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o \
1013                      libgcc_stub.a"
1014         case x${enable_threads} in
1015         x | xyes | xposix )
1016                 thread_file=posix
1017                 ;;
1018         esac
1019         gas=yes
1020         case ${target} in
1021           *-*-hpux11.[01]*)
1022                 use_gcc_stdint=provide
1023                 tm_file="${tm_file} hpux-stdint.h"
1024                 ;;
1025           *-*-hpux11.[23]*)
1026                 use_gcc_stdint=wrap
1027                 tm_file="${tm_file} hpux-stdint.h"
1028                 ;;
1029         esac
1030         ;;
1031 hppa[12]*-*-hpux11*)
1032         case ${target} in
1033         hppa1.1-*-* | hppa2*-*-*)
1034                 target_cpu_default="MASK_PA_11"
1035                 ;;
1036         esac
1037         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
1038                  pa/pa-hpux.h pa/pa-hpux1010.h pa/pa-hpux11.h"
1039         extra_options="${extra_options} pa/pa-hpux.opt pa/pa-hpux1010.opt"
1040         case ${target} in
1041         *-*-hpux11.[1-9]*)
1042                 tm_file="${tm_file} pa/pa-hpux1111.h"
1043                 extra_options="${extra_options} pa/pa-hpux1111.opt"
1044                 ;;
1045         esac
1046         tmake_file="pa/t-pa-hpux11 pa/t-pa-hpux pa/t-hpux-shlib"
1047         # Set the libgcc version number
1048         if test x$sjlj = x1; then
1049             tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
1050         else
1051             tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
1052         fi
1053         case x${enable_threads} in
1054         x | xyes | xposix )
1055                 thread_file=posix
1056                 ;;
1057         esac
1058         use_collect2=yes
1059         gas=yes
1060         case ${target} in
1061           *-*-hpux11.[01]*)
1062                 use_gcc_stdint=provide
1063                 tm_file="${tm_file} hpux-stdint.h"
1064                 ;;
1065           *-*-hpux11.[23]*)
1066                 use_gcc_stdint=wrap
1067                 tm_file="${tm_file} hpux-stdint.h"
1068                 ;;
1069         esac
1070         ;;
1071 i[34567]86-*-darwin*)
1072         need_64bit_hwint=yes
1073
1074         # This is so that '.../configure && make' doesn't fail due to
1075         # config.guess deciding that the configuration is i386-*-darwin* and
1076         # then this file using that to set --with-cpu=i386 which has no -m64
1077         # support.
1078         with_cpu=${with_cpu:-generic}
1079         tmake_file="${tmake_file} i386/t-crtpc i386/t-crtfm"
1080         ;;
1081 x86_64-*-darwin*)
1082         with_cpu=${with_cpu:-generic}
1083         tmake_file="${tmake_file} t-darwin ${cpu_type}/t-darwin64 t-slibgcc-darwin i386/t-crtpc i386/t-crtfm"
1084         tm_file="${tm_file} ${cpu_type}/darwin64.h"
1085         ;;
1086 i[34567]86-*-elf*)
1087         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h"
1088         tmake_file="${tmake_file} i386/t-i386elf t-svr4"
1089         ;;
1090 x86_64-*-elf*)
1091         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h i386/x86-64.h"
1092         tmake_file="${tmake_file} i386/t-i386elf t-svr4"
1093         ;;
1094 i[34567]86-*-freebsd*)
1095         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/freebsd.h"
1096         ;;
1097 x86_64-*-freebsd*)
1098         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/x86-64.h i386/freebsd.h i386/freebsd64.h"
1099         tmake_file="${tmake_file} i386/t-crtstuff"
1100         ;;
1101 i[34567]86-*-netbsdelf*)
1102         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/netbsd-elf.h"
1103         ;;
1104 i[34567]86-*-netbsd*)
1105         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h netbsd.h netbsd-aout.h i386/netbsd.h"
1106         tmake_file="${tmake_file} t-netbsd"
1107         extra_parts=""
1108         use_collect2=yes
1109         ;;
1110 x86_64-*-netbsd*)
1111         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/x86-64.h i386/netbsd64.h"
1112         tmake_file="${tmake_file} i386/t-crtstuff"
1113         ;;
1114 i[34567]86-*-openbsd2.*|i[34567]86-*openbsd3.[0123])
1115         tm_file="i386/i386.h i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h openbsd-oldgas.h openbsd.h i386/openbsd.h"
1116         # needed to unconfuse gdb
1117         tmake_file="${tmake_file} t-libc-ok t-openbsd i386/t-openbsd"
1118         # we need collect2 until our bug is fixed...
1119         use_collect2=yes
1120         ;;
1121 i[34567]86-*-openbsd*)
1122         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h"
1123         tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h i386/openbsdelf.h"
1124         gas=yes
1125         gnu_ld=yes
1126         ;;
1127 i[34567]86-*-linux* | i[34567]86-*-kfreebsd*-gnu | i[34567]86-*-knetbsd*-gnu | i[34567]86-*-gnu* | i[34567]86-*-kopensolaris*-gnu)
1128                         # Intel 80386's running GNU/*
1129                         # with ELF format using glibc 2
1130         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h"
1131         case ${target} in
1132         i[34567]86-*-linux*)
1133                 if test x$enable_targets = xall; then
1134                         tm_file="${tm_file} i386/x86-64.h i386/linux64.h"
1135                         tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1136                         tmake_file="${tmake_file} i386/t-linux64"
1137                         need_64bit_hwint=yes
1138                         case X"${with_cpu}" in
1139                         Xgeneric|Xatom|Xcore2|Xnocona|Xx86-64|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx)
1140                                 ;;
1141                         X)
1142                                 if test x$with_cpu_64 = x; then
1143                                         with_cpu_64=generic
1144                                 fi
1145                                 ;;
1146                         *)
1147                                 echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
1148                                 echo "generic atom core2 nocona x86-64 amdfam10 barcelona k8 opteron athlon64 athlon-fx" 1>&2
1149                                 exit 1
1150                                 ;;
1151                         esac
1152                 else
1153                         tm_file="${tm_file} i386/linux.h"
1154                 fi
1155                 ;;
1156         i[34567]86-*-knetbsd*-gnu) tm_file="${tm_file} i386/linux.h knetbsd-gnu.h i386/knetbsd-gnu.h" ;;
1157         i[34567]86-*-kfreebsd*-gnu) tm_file="${tm_file} i386/linux.h kfreebsd-gnu.h i386/kfreebsd-gnu.h" ;;
1158         i[34567]86-*-kopensolaris*-gnu) tm_file="${tm_file} i386/linux.h kopensolaris-gnu.h i386/kopensolaris-gnu.h" ;;
1159         i[34567]86-*-gnu*) tm_file="$tm_file i386/linux.h gnu.h i386/gnu.h";;
1160         esac
1161         tmake_file="${tmake_file} i386/t-crtstuff i386/t-crtpc i386/t-crtfm t-dfprules"
1162         ;;
1163 x86_64-*-linux* | x86_64-*-kfreebsd*-gnu | x86_64-*-knetbsd*-gnu)
1164         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h \
1165                  i386/x86-64.h i386/linux64.h"
1166         case ${target} in
1167         x86_64-*-kfreebsd*-gnu) tm_file="${tm_file} kfreebsd-gnu.h" ;;
1168         x86_64-*-knetbsd*-gnu) tm_file="${tm_file} knetbsd-gnu.h" ;;
1169         esac
1170         tmake_file="${tmake_file} i386/t-linux64 i386/t-crtstuff i386/t-crtpc i386/t-crtfm t-dfprules"
1171         ;;
1172 i[34567]86-pc-msdosdjgpp*)
1173         xm_file=i386/xm-djgpp.h
1174         tm_file="dbxcoff.h ${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/djgpp.h"
1175         tmake_file="${tmake_file} i386/t-djgpp"
1176         extra_options="${extra_options} i386/djgpp.opt"
1177         gnu_ld=yes
1178         gas=yes
1179         use_gcc_stdint=wrap
1180         ;;
1181 i[34567]86-*-lynxos*)
1182         xm_defines=POSIX
1183         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/lynx.h lynx.h"
1184         tmake_file="${tmake_file} i386/t-crtstuff t-lynx"
1185         extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
1186         extra_options="${extra_options} lynx.opt"
1187         thread_file=lynx
1188         gnu_ld=yes
1189         gas=yes
1190         ;;
1191 i[3456x]86-*-netware*)
1192         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h tm-dwarf2.h i386/netware.h"
1193         tmake_file="${tmake_file} i386/t-netware"
1194         extra_objs=netware.o
1195         case /${with_ld} in
1196         */nwld)
1197                 extra_objs="$extra_objs nwld.o"
1198                 tm_file="${tm_file} i386/nwld.h"
1199                 tmake_file="${tmake_file} i386/t-nwld"
1200                 extra_parts="crt0.o libgcc.def libc.def libcpre.def posixpre.def"
1201                 ;;
1202         esac
1203         case x${enable_threads} in
1204         x | xyes | xposix) thread_file='posix';;
1205         xnks) thread_file='nks';;
1206         xno) ;;
1207         *) echo 'Unknown thread configuration for NetWare' >&2; exit 1;;
1208         esac
1209         ;;
1210 i[34567]86-*-nto-qnx*)
1211         tm_file="${tm_file} i386/att.h dbxelf.h tm-dwarf2.h elfos.h svr4.h i386/unix.h i386/nto.h"
1212         tmake_file="${tmake_file} i386/t-nto"
1213         gnu_ld=yes
1214         gas=yes
1215         ;;
1216 i[34567]86-*-rtems*)
1217         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/rtemself.h rtems.h newlib-stdint.h"
1218         extra_parts="crtbegin.o crtend.o crti.o crtn.o"
1219         tmake_file="${tmake_file} i386/t-rtems-i386 i386/t-crtstuff t-rtems"
1220         ;;
1221 i[34567]86-*-solaris2*)
1222         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h sol2.h"
1223         case ${target} in
1224         *-*-solaris2.1[0-9]*)
1225                 tm_file="${tm_file} sol2-10.h"
1226                 ;;
1227         esac
1228         tm_file="${tm_file} i386/sol2.h"
1229         tmake_file="${tmake_file} t-sol2 t-svr4"
1230         c_target_objs="${c_target_objs} sol2-c.o"
1231         cxx_target_objs="${cxx_target_objs} sol2-c.o"
1232         extra_objs="sol2.o"
1233         tm_p_file="${tm_p_file} sol2-protos.h"
1234         if test x$gnu_ld = xyes; then
1235                 tmake_file="$tmake_file t-slibgcc-elf-ver"
1236                 tm_defines="${tm_defines} TARGET_GNU_LD=1"
1237         else
1238                 tmake_file="$tmake_file t-slibgcc-sld"
1239         fi
1240         if test x$gas = xyes; then
1241                 tm_file="usegas.h ${tm_file}"
1242         fi
1243         tm_file="$tm_file tm-dwarf2.h"
1244         case ${target} in
1245         *-*-solaris2.1[0-9]*)
1246                 tm_file="${tm_file} i386/x86-64.h i386/sol2-10.h"
1247                 tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1248                 tmake_file="$tmake_file i386/t-sol2-10"
1249                 # i386/t-crtstuff only affects libgcc.  Its inclusion
1250                 # depends on a runtime test and is thus performed in
1251                 # libgcc/configure.ac instead.
1252                 need_64bit_hwint=yes
1253                 use_gcc_stdint=wrap
1254                 case X"${with_cpu}" in
1255                 Xgeneric|Xatom|Xcore2|Xnocona|Xx86-64|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx)
1256                         ;;
1257                 X)
1258                         if test x$with_cpu_64 = x; then
1259                                 with_cpu_64=generic
1260                         fi
1261                         ;;
1262                 *)
1263                         echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
1264                         echo "generic atom core2 nocona x86-64 amdfam10 barcelona k8 opteron athlon64 athlon-fx" 1>&2
1265                         exit 1
1266                         ;;
1267                 esac
1268                 ;;
1269         *)
1270                 use_gcc_stdint=provide
1271                 ;;
1272         esac
1273         case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
1274           "":yes:* | yes:yes:* )
1275                 thread_file=posix
1276                 ;;
1277           "":*:yes | yes:*:yes )
1278                 thread_file=solaris
1279                 ;;
1280         esac
1281         ;;
1282 i[4567]86-wrs-vxworks|i[4567]86-wrs-vxworksae)
1283         tm_file="${tm_file} i386/unix.h i386/att.h elfos.h svr4.h vx-common.h"
1284         case ${target} in
1285           *-vxworksae*)
1286             tm_file="${tm_file} vxworksae.h i386/vx-common.h i386/vxworksae.h"
1287             tmake_file="${tmake_file} i386/t-vxworks i386/t-vxworksae"
1288             ;;
1289           *)
1290             tm_file="${tm_file} vxworks.h i386/vx-common.h i386/vxworks.h"
1291             tmake_file="${tmake_file} i386/t-vxworks"
1292             ;;
1293         esac
1294         ;;
1295 i[34567]86-*-pe | i[34567]86-*-cygwin*)
1296         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/cygwin.h i386/cygwin-stdint.h"
1297         xm_file=i386/xm-cygwin.h
1298         # This has to match the logic for DWARF2_UNWIND_INFO in gcc/config/i386/cygming.h
1299         if test x$sjlj = x0; then
1300                 tmake_eh_file="i386/t-dw2-eh"
1301         else
1302                 tmake_eh_file="i386/t-sjlj-eh"
1303         fi
1304         tmake_file="${tmake_file} ${tmake_eh_file} i386/t-cygming i386/t-cygwin"
1305         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1306         extra_options="${extra_options} i386/cygming.opt"
1307         extra_objs="winnt.o winnt-stubs.o"
1308         c_target_objs="${c_target_objs} cygwin2.o msformat-c.o"
1309         cxx_target_objs="${cxx_target_objs} cygwin2.o winnt-cxx.o msformat-c.o"
1310         extra_gcc_objs=cygwin1.o
1311         if test x$enable_threads = xyes; then
1312                 thread_file='posix'
1313         fi
1314         use_gcc_stdint=wrap
1315         ;;
1316 i[34567]86-*-mingw* | x86_64-*-mingw*)
1317         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/mingw32.h"
1318         xm_file=i386/xm-mingw32.h
1319         case ${target} in
1320                 x86_64-*-* | *-w64-*)
1321                         need_64bit_hwint=yes
1322                         ;;
1323                 *)
1324                         ;;
1325         esac
1326         # This makes the logic if mingw's or the w64 feature set has to be used
1327         case ${target} in
1328                 *-w64-*)
1329                         tm_file="${tm_file} i386/mingw-w64.h"
1330                         tmake_file="${tmake_file} i386/t-mingw-w64"
1331                         if test x$enable_targets = xall; then
1332                                 tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1333                                 case X"${with_cpu}" in
1334                                 Xgeneric|Xatom|Xcore2|Xnocona|Xx86-64|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx)
1335                                         ;;
1336                                 X)
1337                                         if test x$with_cpu_64 = x; then
1338                                                 with_cpu_64=generic
1339                                         fi
1340                                         ;;
1341                                 *)
1342                                         echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
1343                                         echo "generic atom core2 nocona x86-64 amdfam10 barcelona k8 opteron athlon64 athlon-fx" 1>&2
1344                                         exit 1
1345                                         ;;
1346                                 esac
1347                         fi
1348                         ;;
1349                 *)
1350                         tmake_file="${tmake_file} i386/t-mingw32"
1351                         ;;
1352         esac
1353         tm_file="${tm_file} i386/mingw-stdint.h"
1354         # This has to match the logic for DWARF2_UNWIND_INFO in gcc/config/i386/cygming.h
1355         if test x$sjlj = x0; then
1356                 tmake_eh_file="i386/t-dw2-eh"
1357         else
1358                 tmake_eh_file="i386/t-sjlj-eh"
1359         fi
1360         tmake_file="${tmake_file} ${tmake_eh_file} i386/t-cygming"
1361         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1362         extra_options="${extra_options} i386/cygming.opt i386/mingw.opt"
1363         case ${target} in
1364                 *-w64-*)
1365                         extra_options="${extra_options} i386/mingw-w64.opt"
1366                         ;;
1367                 *)
1368                         ;;
1369         esac
1370         extra_objs="winnt.o winnt-stubs.o"
1371         c_target_objs="${c_target_objs} msformat-c.o"
1372         cxx_target_objs="${cxx_target_objs} winnt-cxx.o msformat-c.o"
1373         default_use_cxa_atexit=yes
1374         use_gcc_stdint=wrap
1375         case ${enable_threads} in
1376           "" | yes | win32)       thread_file='win32'
1377           tmake_file="${tmake_file} i386/t-gthr-win32"
1378           ;;
1379         esac
1380         case ${target} in
1381                 x86_64-*-mingw*)
1382                         tmake_file="${tmake_file} i386/t-crtfm"
1383                         ;;
1384                 *)
1385                         ;;
1386         esac
1387         case ${target} in
1388                 *mingw32crt*)
1389                         tm_file="${tm_file} i386/crtdll.h"
1390                         ;;
1391                 *mingw32msv* | *mingw*)
1392                         ;;
1393         esac
1394         ;;
1395 i[34567]86-*-interix3*)
1396         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/i386-interix.h i386/i386-interix3.h interix.h interix3.h"
1397         tmake_file="${tmake_file} i386/t-interix"
1398         extra_objs=winnt.o
1399         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1400         if test x$enable_threads = xyes ; then
1401                 thread_file='posix'
1402         fi
1403         if test x$stabs = xyes ; then
1404                 tm_file="${tm_file} dbxcoff.h"
1405         fi
1406         ;;
1407 ia64*-*-elf*)
1408         tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h ia64/sysv4.h ia64/elf.h"
1409         tmake_file="ia64/t-ia64"
1410         target_cpu_default="0"
1411         if test x$gas = xyes
1412         then
1413                 target_cpu_default="${target_cpu_default}|MASK_GNU_AS"
1414         fi
1415         if test x$gnu_ld = xyes
1416         then
1417                 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
1418         fi
1419         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1420         ;;
1421 ia64*-*-freebsd*)
1422         tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} ia64/sysv4.h ia64/freebsd.h"
1423         target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1424         tmake_file="${tmake_file} ia64/t-ia64"
1425         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1426         ;;
1427 ia64*-*-linux*)
1428         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h ia64/sysv4.h ia64/linux.h"
1429         tmake_file="${tmake_file} ia64/t-ia64 t-libunwind ia64/t-glibc"
1430         if test x$with_system_libunwind != xyes ; then
1431                 tmake_file="${tmake_file} t-libunwind-elf ia64/t-glibc-libunwind"
1432         fi
1433         target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1434         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1435         ;;
1436 ia64*-*-hpux*)
1437         tm_file="${tm_file} dbxelf.h elfos.h svr4.h ia64/sysv4.h ia64/hpux.h"
1438         tmake_file="ia64/t-ia64 ia64/t-hpux"
1439         target_cpu_default="MASK_GNU_AS"
1440         case x$enable_threads in
1441         x | xyes | xposix )
1442                 thread_file=posix
1443                 ;;
1444         esac
1445         use_collect2=no
1446         c_target_objs="ia64-c.o"
1447         cxx_target_objs="ia64-c.o"
1448         extra_options="${extra_options} ia64/ilp32.opt"
1449         use_gcc_stdint=wrap
1450         tm_file="${tm_file} hpux-stdint.h"
1451         ;;
1452 ia64-hp-*vms*)
1453         tm_file="${tm_file} elfos.h ia64/sysv4.h ia64/elf.h ia64/vms.h ia64/vms64.h"
1454         xm_file="vms/xm-vms.h vms/xm-vms64.h"
1455         tmake_file="vms/t-vms vms/t-vms64 ia64/t-ia64 ia64/t-vms"
1456         xmake_file=vms/x-vms
1457         target_cpu_default="0"
1458         if test x$gas = xyes
1459         then
1460                 target_cpu_default="${target_cpu_default}|MASK_GNU_AS"
1461         fi
1462         exeext=.exe
1463         install_headers_dir=install-headers-cp
1464         extra_options="${extra_options} vms/vms.opt"
1465         ;;
1466 iq2000*-*-elf*)
1467         tm_file="svr4.h elfos.h newlib-stdint.h iq2000/iq2000.h"
1468         tmake_file=iq2000/t-iq2000
1469         out_file=iq2000/iq2000.c
1470         md_file=iq2000/iq2000.md
1471         ;;
1472 m32r-*-elf*)
1473         tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file}"
1474         extra_parts="crtinit.o crtfini.o"
1475         ;;
1476 m32rle-*-elf*)
1477         tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h m32r/little.h ${tm_file}"
1478         extra_parts="crtinit.o crtfini.o m32rx/crtinit.o m32rx/crtfini.o"
1479         ;;
1480 m32r-*-rtems*)
1481         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} m32r/rtems.h rtems.h newlib-stdint.h"
1482         tmake_file="m32r/t-m32r t-rtems"
1483         extra_parts="crtinit.o crtfini.o"
1484         ;;
1485 m32r-*-linux*)
1486         tm_file="dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h ${tm_file} m32r/linux.h"
1487         # We override the tmake_file for linux -- why?
1488         tmake_file="t-slibgcc-elf-ver m32r/t-linux"
1489         gnu_ld=yes
1490         if test x$enable_threads = xyes; then
1491                 thread_file='posix'
1492         fi
1493         ;;
1494 m32rle-*-linux*)
1495         tm_file="dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h m32r/little.h ${tm_file} m32r/linux.h"
1496         # We override the tmake_file for linux -- why?
1497         tmake_file="t-slibgcc-elf-ver m32r/t-linux"
1498         gnu_ld=yes
1499         if test x$enable_threads = xyes; then
1500                 thread_file='posix'
1501         fi
1502         ;;
1503 # m68hc11 and m68hc12 share the same machine description.
1504 m68hc11-*-*|m6811-*-*)
1505         tm_file="dbxelf.h elfos.h usegas.h newlib-stdint.h m68hc11/m68hc11.h"
1506         tm_p_file="m68hc11/m68hc11-protos.h"
1507         md_file="m68hc11/m68hc11.md"
1508         out_file="m68hc11/m68hc11.c"
1509         tmake_file="m68hc11/t-m68hc11"
1510         use_gcc_stdint=wrap
1511         ;;
1512 m68hc12-*-*|m6812-*-*)
1513         tm_file="m68hc11/m68hc12.h dbxelf.h elfos.h usegas.h newlib-stdint.h m68hc11/m68hc11.h"
1514         tm_p_file="m68hc11/m68hc11-protos.h"
1515         md_file="m68hc11/m68hc11.md"
1516         out_file="m68hc11/m68hc11.c"
1517         tmake_file="m68hc11/t-m68hc11"
1518         extra_options="${extra_options} m68hc11/m68hc11.opt"
1519         use_gcc_stdint=wrap
1520         ;;
1521 m68k-*-elf* | fido-*-elf*)
1522         case ${target} in
1523         fido-*-elf*)
1524                 # Check that $with_cpu makes sense.
1525                 case $with_cpu in
1526                 "" | "fidoa")
1527                         ;;
1528                 *)
1529                         echo "Cannot accept --with-cpu=$with_cpu"
1530                         exit 1
1531                         ;;
1532                 esac
1533                 with_cpu=fidoa
1534                 ;;
1535         *)
1536                 default_m68k_cpu=68020
1537                 default_cf_cpu=5206
1538                 ;;
1539         esac
1540         tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h newlib-stdint.h m68k/m68kemb.h m68k/m68020-elf.h"
1541         tm_defines="${tm_defines} MOTOROLA=1"
1542         tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-m68kelf"
1543         # Add multilibs for targets other than fido.
1544         case ${target} in
1545         fido-*-elf*)
1546                 ;;
1547         *)
1548                 tmake_file="$tmake_file m68k/t-mlibs"
1549                 ;;
1550         esac
1551         extra_parts="crtbegin.o crtend.o"
1552         ;;
1553 m68k*-*-netbsdelf*)
1554         default_m68k_cpu=68020
1555         default_cf_cpu=5475
1556         tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h m68k/netbsd-elf.h"
1557         tm_defines="${tm_defines} MOTOROLA=1"
1558         ;;
1559 m68k*-*-openbsd*)
1560         default_m68k_cpu=68020
1561         default_cf_cpu=5475
1562         # needed to unconfuse gdb
1563         tm_defines="${tm_defines} OBSD_OLD_GAS"
1564         tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h m68k/openbsd.h"
1565         tmake_file="t-libc-ok t-openbsd m68k/t-openbsd"
1566         # we need collect2 until our bug is fixed...
1567         use_collect2=yes
1568         ;;
1569 m68k-*-uclinuxoldabi*)          # Motorola m68k/ColdFire running uClinux
1570                                 # with uClibc, using the original
1571                                 # m68k-elf-based ABI
1572         default_m68k_cpu=68020
1573         default_cf_cpu=5206
1574         tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/uclinux-oldabi.h glibc-stdint.h"
1575         tm_defines="${tm_defines} MOTOROLA=1"
1576         tmake_file="m68k/t-floatlib m68k/t-uclinux"
1577         ;;
1578 m68k-*-uclinux*)                # Motorola m68k/ColdFire running uClinux
1579                                 # with uClibc, using the new GNU/Linux-style
1580                                 # ABI.
1581         default_m68k_cpu=68020
1582         default_cf_cpu=5206
1583         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h flat.h m68k/linux.h m68k/uclinux.h ./sysroot-suffix.h"
1584         tm_defines="${tm_defines} MOTOROLA=1 UCLIBC_DEFAULT=1"
1585         extra_options="${extra_options} linux.opt"
1586         tmake_file="m68k/t-floatlib m68k/t-uclinux m68k/t-mlibs"
1587         ;;
1588 m68k-*-linux*)          # Motorola m68k's running GNU/Linux
1589                                 # with ELF format using glibc 2
1590                                 # aka the GNU/Linux C library 6.
1591         default_m68k_cpu=68020
1592         default_cf_cpu=5475
1593         with_arch=${with_arch:-m68k}
1594         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h m68k/linux.h ./sysroot-suffix.h"
1595         extra_options="${extra_options} m68k/ieee.opt"
1596         tm_defines="${tm_defines} MOTOROLA=1"
1597         tmake_file="${tmake_file} m68k/t-floatlib m68k/t-linux m68k/t-mlibs"
1598         # if not configured with --enable-sjlj-exceptions, bump the
1599         # libgcc version number
1600         if test x$sjlj != x1; then
1601             tmake_file="$tmake_file m68k/t-slibgcc-elf-ver"
1602         fi
1603         ;;
1604 m68k-*-rtems*)
1605         default_m68k_cpu=68020
1606         default_cf_cpu=5206
1607         tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-crtstuff t-rtems m68k/t-rtems m68k/t-mlibs"
1608         tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h newlib-stdint.h"
1609         tm_defines="${tm_defines} MOTOROLA=1"
1610         extra_parts="crtbegin.o crtend.o"
1611         ;;
1612 mcore-*-elf)
1613         tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file} mcore/mcore-elf.h"
1614         tmake_file=mcore/t-mcore
1615         inhibit_libc=true
1616         ;;
1617 mcore-*-pe*)
1618         tm_file="svr3.h dbxcoff.h newlib-stdint.h ${tm_file} mcore/mcore-pe.h"
1619         tmake_file=mcore/t-mcore-pe
1620         inhibit_libc=true
1621         use_gcc_stdint=wrap
1622         ;;
1623 mep-*-*)
1624         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
1625         tmake_file=mep/t-mep
1626         extra_parts="crtbegin.o crtend.o"
1627         c_target_objs="mep-pragma.o"
1628         cxx_target_objs="mep-pragma.o"
1629         if test -d "${srcdir}/../newlib/libc/include" &&
1630            test "x$with_headers" = x; then
1631                 with_headers=yes
1632         fi
1633         use_gcc_stdint=wrap
1634         ;;
1635 mips-sgi-irix[56]*)
1636         tm_file="elfos.h ${tm_file} mips/iris.h"
1637         tmake_file="mips/t-iris mips/t-slibgcc-irix"
1638         target_cpu_default="MASK_ABICALLS"
1639         case ${target} in
1640         *-*-irix5*)
1641                 tm_file="${tm_file} mips/iris5.h"
1642                 ;;
1643
1644         *-*-irix6*)
1645                 tm_file="${tm_file} mips/iris6.h"
1646                 tmake_file="${tmake_file} mips/t-iris6"
1647                 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_N32"
1648                 ;;
1649         esac
1650         if test "x$stabs" = xyes
1651         then
1652                 tm_file="${tm_file} dbx.h mips/dbxmdebug.h"
1653         fi
1654         if test "x$gnu_ld" = xyes
1655         then
1656                 tm_defines="${tm_defines} IRIX_USING_GNU_LD"
1657         fi
1658         case ${enable_threads}:${have_pthread_h} in
1659           "":yes | yes:yes ) thread_file=posix ;;
1660         esac
1661         ;;
1662 mips*-*-netbsd*)                        # NetBSD/mips, either endian.
1663         target_cpu_default="MASK_ABICALLS"
1664         tm_file="elfos.h ${tm_file} mips/elf.h netbsd.h netbsd-elf.h mips/netbsd.h"
1665         ;;
1666 mips64*-*-linux* | mipsisa64*-*-linux*)
1667         tm_file="dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h ${tm_file} mips/linux.h mips/linux64.h"
1668         tmake_file="${tmake_file} mips/t-linux64 mips/t-libgcc-mips16"
1669         tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_N32"
1670         case ${target} in
1671                 mips64el-st-linux-gnu)
1672                         tm_file="${tm_file} mips/st.h"
1673                         tmake_file="${tmake_file} mips/t-st"
1674                         ;;
1675                 mips64octeon*-*-linux*)
1676                         tm_defines="${tm_defines} MIPS_CPU_STRING_DEFAULT=\\\"octeon\\\""
1677                         target_cpu_default=MASK_SOFT_FLOAT_ABI
1678                         ;;
1679                 mipsisa64r2*-*-linux*)
1680                         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=65"
1681                         ;;
1682         esac
1683         gnu_ld=yes
1684         gas=yes
1685         test x$with_llsc != x || with_llsc=yes
1686         ;;
1687 mips*-*-linux*)                         # Linux MIPS, either endian.
1688         tm_file="dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h ${tm_file} mips/linux.h"
1689         tmake_file="${tmake_file} mips/t-libgcc-mips16"
1690         case ${target} in
1691         mipsisa32r2*)
1692                 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33"
1693                 ;;
1694         mipsisa32*)
1695                 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32"
1696         esac
1697         test x$with_llsc != x || with_llsc=yes
1698         ;;
1699 mips*-*-openbsd*)
1700         tm_defines="${tm_defines} OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_OBJECT OBSD_HAS_CORRECT_SPECS"
1701         target_cpu_default="MASK_ABICALLS"
1702         tm_file="mips/mips.h openbsd.h openbsd-stdint.h openbsd-libpthread.h mips/openbsd.h mips/sdb.h"
1703         case ${target} in
1704         mips*el-*-openbsd*)
1705             tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=0";;
1706         *)  tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=MASK_BIG_ENDIAN";;
1707         esac
1708         ;;
1709 mips*-sde-elf*)
1710         tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/sde.h"
1711         tmake_file="mips/t-sde mips/t-libgcc-mips16"
1712         case "${with_newlib}" in
1713           yes)
1714             # newlib / libgloss.
1715             ;;
1716           *)
1717             # MIPS toolkit libraries.
1718             tm_file="$tm_file mips/sdemtk.h"
1719             tmake_file="$tmake_file mips/t-sdemtk"
1720             extra_options="$extra_options mips/sdemtk.opt"
1721             case ${enable_threads} in
1722               "" | yes | mipssde)
1723                 thread_file='mipssde'
1724                 ;;
1725             esac
1726             ;;
1727         esac
1728         case ${target} in
1729           mipsisa32r2*)
1730             tm_defines="MIPS_ISA_DEFAULT=33 MIPS_ABI_DEFAULT=ABI_32"
1731             ;;
1732           mipsisa32*)
1733             tm_defines="MIPS_ISA_DEFAULT=32 MIPS_ABI_DEFAULT=ABI_32"
1734             ;;
1735           mipsisa64r2*)
1736             tm_defines="MIPS_ISA_DEFAULT=65 MIPS_ABI_DEFAULT=ABI_N32"
1737             ;;
1738           mipsisa64*)
1739             tm_defines="MIPS_ISA_DEFAULT=64 MIPS_ABI_DEFAULT=ABI_N32"
1740             ;;
1741         esac
1742         ;;
1743 mipsisa32-*-elf* | mipsisa32el-*-elf* | \
1744 mipsisa32r2-*-elf* | mipsisa32r2el-*-elf* | \
1745 mipsisa64-*-elf* | mipsisa64el-*-elf* | \
1746 mipsisa64r2-*-elf* | mipsisa64r2el-*-elf*)
1747         tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1748         tmake_file="mips/t-isa3264 mips/t-libgcc-mips16"
1749         case ${target} in
1750           mipsisa32r2*)
1751             tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33"
1752             ;;
1753           mipsisa32*)
1754             tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32"
1755             ;;
1756           mipsisa64r2*)
1757             tm_defines="${tm_defines} MIPS_ISA_DEFAULT=65"
1758             ;;
1759           mipsisa64*)
1760             tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64"
1761             ;;
1762         esac
1763         case ${target} in
1764           mipsisa32*-*-elfoabi*)
1765             tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_32"
1766             tm_file="${tm_file} mips/elfoabi.h"
1767             ;;
1768           mipsisa64*-*-elfoabi*)
1769             tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_O64"
1770             tm_file="${tm_file} mips/elfoabi.h"
1771             ;;
1772           *-*-elf*)
1773             tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_EABI"
1774             ;;
1775         esac
1776         ;;
1777 mipsisa64sr71k-*-elf*)
1778         tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1779         tmake_file=mips/t-sr71k
1780         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1781         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sr71000\\\" MIPS_ABI_DEFAULT=ABI_EABI"
1782         ;;
1783 mipsisa64sb1-*-elf* | mipsisa64sb1el-*-elf*)
1784         tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1785         tmake_file="mips/t-elf mips/t-libgcc-mips16 mips/t-sb1"
1786         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1787         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sb1\\\" MIPS_ABI_DEFAULT=ABI_O64"
1788         ;;
1789 mips-*-elf* | mipsel-*-elf*)
1790         tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1791         tmake_file="mips/t-elf mips/t-libgcc-mips16"
1792         ;;
1793 mips64-*-elf* | mips64el-*-elf*)
1794         tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1795         tmake_file="mips/t-elf mips/t-libgcc-mips16"
1796         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1797         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1798         ;;
1799 mips64vr-*-elf* | mips64vrel-*-elf*)
1800         tm_file="elfos.h newlib-stdint.h ${tm_file} mips/vr.h mips/elf.h"
1801         tmake_file=mips/t-vr
1802         tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_EABI"
1803         ;;
1804 mips64orion-*-elf* | mips64orionel-*-elf*)
1805         tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elforion.h mips/elf.h"
1806         tmake_file="mips/t-elf mips/t-libgcc-mips16"
1807         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1808         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1809         ;;
1810 mips*-*-rtems*)
1811         tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/rtems.h rtems.h"
1812         tmake_file="mips/t-elf mips/t-libgcc-mips16 t-rtems mips/t-rtems"
1813         ;;
1814 mips-wrs-vxworks)
1815         tm_file="elfos.h ${tm_file} svr4.h mips/elf.h vx-common.h vxworks.h mips/vxworks.h"
1816         tmake_file="${tmake_file} mips/t-vxworks"
1817         ;;
1818 mipstx39-*-elf* | mipstx39el-*-elf*)
1819         tm_file="elfos.h newlib-stdint.h ${tm_file} mips/r3900.h mips/elf.h"
1820         tmake_file="mips/t-r3900 mips/t-libgcc-mips16"
1821         ;;
1822 mmix-knuth-mmixware)
1823         tm_file="${tm_file} newlib-stdint.h"
1824         need_64bit_hwint=yes
1825         use_gcc_stdint=wrap
1826         ;;
1827 mn10300-*-*)
1828         tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file}"
1829         if test x$stabs = xyes
1830         then
1831                 tm_file="${tm_file} dbx.h"
1832         fi
1833         use_collect2=no
1834         use_gcc_stdint=wrap
1835         ;;
1836 pdp11-*-*)
1837         tm_file="${tm_file} newlib-stdint.h"
1838         use_gcc_stdint=wrap
1839         ;;
1840 picochip-*)
1841         tm_file="${tm_file} newlib-stdint.h"
1842         use_gcc_stdint=wrap
1843         ;;
1844 # port not yet contributed
1845 #powerpc-*-openbsd*)
1846 #       tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-fprules-fpbit "
1847 #       extra_headers=
1848 #       ;;
1849 powerpc-*-darwin*)
1850         extra_options="${extra_options} rs6000/darwin.opt"
1851         extra_parts="crt2.o"
1852         case ${target} in
1853           *-darwin1[0-9]* | *-darwin[8-9]*)
1854             tmake_file="${tmake_file} rs6000/t-darwin8"
1855             tm_file="${tm_file} rs6000/darwin8.h"
1856             ;;
1857           *-darwin7*)
1858             tm_file="${tm_file} rs6000/darwin7.h"
1859             ;;
1860           *-darwin[0-6]*)
1861             ;;
1862         esac
1863         extra_headers=altivec.h
1864         ;;
1865 powerpc64-*-darwin*)
1866         tm_file="${tm_file} ${cpu_type}/darwin8.h ${cpu_type}/darwin64.h"
1867         extra_options="${extra_options} ${cpu_type}/darwin.opt"
1868         # We're omitting t-darwin8 to avoid building any multilibs
1869         extra_headers=altivec.h
1870         ;;
1871 powerpc*-*-freebsd*)
1872         tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} rs6000/sysv4.h rs6000/freebsd.h"
1873         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1874         extra_options="${extra_options} rs6000/sysv4.opt"
1875         ;;
1876 powerpc-*-netbsd*)
1877         tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h freebsd-spec.h rs6000/sysv4.h rs6000/netbsd.h"
1878         tmake_file="${tmake_file} rs6000/t-netbsd"
1879         extra_options="${extra_options} rs6000/sysv4.opt"
1880         ;;
1881 powerpc-*-eabispe*)
1882         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabispe.h"
1883         extra_options="${extra_options} rs6000/sysv4.opt"
1884         tmake_file="rs6000/t-spe rs6000/t-ppccomm"
1885         use_gcc_stdint=wrap
1886         ;;
1887 powerpc-*-eabisimaltivec*)
1888         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h rs6000/eabialtivec.h"
1889         extra_options="${extra_options} rs6000/sysv4.opt"
1890         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcendian rs6000/t-ppccomm"
1891         use_gcc_stdint=wrap
1892         ;;
1893 powerpc-*-eabisim*)
1894         tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h"
1895         extra_options="${extra_options} rs6000/sysv4.opt"
1896         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1897         use_gcc_stdint=wrap
1898         ;;
1899 powerpc-*-elf*)
1900         tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h"
1901         extra_options="${extra_options} rs6000/sysv4.opt"
1902         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1903         ;;
1904 powerpc-*-eabialtivec*)
1905         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabialtivec.h"
1906         extra_options="${extra_options} rs6000/sysv4.opt"
1907         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcendian rs6000/t-ppccomm"
1908         use_gcc_stdint=wrap
1909         ;;
1910 powerpc-xilinx-eabi*)
1911         tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/singlefp.h rs6000/xfpu.h rs6000/xilinx.h"
1912         extra_options="${extra_options} rs6000/sysv4.opt"
1913         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm rs6000/t-xilinx"
1914         use_gcc_stdint=wrap
1915         ;;
1916 powerpc-*-eabi*)
1917         tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h"
1918         extra_options="${extra_options} rs6000/sysv4.opt"
1919         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1920         use_gcc_stdint=wrap
1921         ;;
1922 powerpc-*-rtems*)
1923         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/rtems.h rtems.h"
1924         extra_options="${extra_options} rs6000/sysv4.opt"
1925         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-rtems t-rtems rs6000/t-ppccomm"
1926         ;;
1927 powerpc-*-linux* | powerpc64-*-linux*)
1928         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1929         extra_options="${extra_options} rs6000/sysv4.opt"
1930         tmake_file="t-dfprules rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1931         maybe_biarch=yes
1932         case ${target} in
1933             powerpc64-*-linux*spe* | powerpc64-*-linux*paired*)
1934                 echo "*** Configuration ${target} not supported" 1>&2
1935                 exit 1
1936                 ;;
1937             powerpc-*-linux*spe* | powerpc-*-linux*paired*)
1938                 maybe_biarch=
1939                 ;;
1940             powerpc64-*-linux*)
1941                 test x$with_cpu != x || cpu_is_64bit=yes
1942                 maybe_biarch=always
1943                 ;;
1944         esac
1945         case ${maybe_biarch}:${enable_targets}:${cpu_is_64bit} in
1946             always:* | yes:*powerpc64* | yes:all:* | yes:*:yes)
1947                 if test x$cpu_is_64bit = xyes; then
1948                     tm_file="${tm_file} rs6000/default64.h"
1949                 fi
1950                 tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h glibc-stdint.h"
1951                 tmake_file="$tmake_file rs6000/t-linux64"
1952                 extra_options="${extra_options} rs6000/linux64.opt"
1953                 ;;
1954             *)
1955                 tm_file="${tm_file} rs6000/linux.h glibc-stdint.h"
1956                 ;;
1957         esac
1958         tmake_file="${tmake_file} t-slibgcc-libgcc rs6000/t-fprules-softfp soft-fp/t-softfp"
1959         case ${target} in
1960             powerpc*-*-linux*altivec*)
1961                 tm_file="${tm_file} rs6000/linuxaltivec.h" ;;
1962             powerpc*-*-linux*spe*)
1963                 tm_file="${tm_file} rs6000/linuxspe.h rs6000/e500.h" ;;
1964             powerpc*-*-linux*paired*)
1965                 tm_file="${tm_file} rs6000/750cl.h" ;;
1966         esac
1967         if test x${enable_secureplt} = xyes; then
1968                 tm_file="rs6000/secureplt.h ${tm_file}"
1969         fi
1970         ;;
1971 powerpc64-*-gnu*)
1972         tm_file="${tm_file} elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/default64.h rs6000/linux64.h rs6000/gnu.h glibc-stdint.h"
1973         extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt"
1974         tmake_file="t-slibgcc-elf-ver t-slibgcc-libgcc t-gnu"
1975         ;;
1976 powerpc-*-gnu-gnualtivec*)
1977         tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h rs6000/gnu.h glibc-stdint.h"
1978         extra_options="${extra_options} rs6000/sysv4.opt"
1979         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos t-slibgcc-elf-ver t-slibgcc-libgcc t-gnu rs6000/t-ppccomm"
1980         if test x$enable_threads = xyes; then
1981                 thread_file='posix'
1982         fi
1983         ;;
1984 powerpc-*-gnu*)
1985         tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/gnu.h glibc-stdint.h"
1986         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos t-slibgcc-elf-ver t-slibgcc-libgcc t-gnu rs6000/t-ppccomm"
1987         extra_options="${extra_options} rs6000/sysv4.opt"
1988         if test x$enable_threads = xyes; then
1989                 thread_file='posix'
1990         fi
1991         ;;
1992 powerpc-wrs-vxworks|powerpc-wrs-vxworksae)
1993         tm_file="${tm_file} elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1994         tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppccomm rs6000/t-vxworks"
1995         extra_options="${extra_options} rs6000/sysv4.opt"
1996         extra_headers=ppc-asm.h
1997         case ${target} in
1998           *-vxworksae*)
1999             tm_file="${tm_file} vx-common.h vxworksae.h rs6000/vxworks.h rs6000/e500.h rs6000/vxworksae.h"
2000             tmake_file="${tmake_file} rs6000/t-vxworksae"
2001             ;;
2002           *-vxworks*)
2003             tm_file="${tm_file} vx-common.h vxworks.h rs6000/vxworks.h rs6000/e500.h"
2004             ;;
2005         esac
2006         ;;
2007 powerpc-*-lynxos*)
2008         xm_defines=POSIX
2009         tm_file="${tm_file} dbxelf.h elfos.h rs6000/sysv4.h rs6000/lynx.h lynx.h"
2010         tmake_file="t-lynx rs6000/t-lynx"
2011         extra_options="${extra_options} rs6000/sysv4.opt lynx.opt"
2012         extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
2013         extra_options="${extra_options} lynx.opt"
2014         thread_file=lynx
2015         gnu_ld=yes
2016         gas=yes
2017         ;;
2018 powerpcle-*-elf*)
2019         tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h"
2020         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
2021         extra_options="${extra_options} rs6000/sysv4.opt"
2022         ;;
2023 powerpcle-*-eabisim*)
2024         tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h"
2025         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
2026         extra_options="${extra_options} rs6000/sysv4.opt"
2027         use_gcc_stdint=wrap
2028         ;;
2029 powerpcle-*-eabi*)
2030         tm_file="${tm_file} dbxelf.h elfos.h usegas.h svr4.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/e500.h"
2031         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
2032         extra_options="${extra_options} rs6000/sysv4.opt"
2033         use_gcc_stdint=wrap
2034         ;;
2035 rs6000-ibm-aix4.[3456789]* | powerpc-ibm-aix4.[3456789]*)
2036         tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix43.h rs6000/xcoff.h rs6000/aix-stdint.h"
2037         tmake_file=rs6000/t-aix43
2038         extra_options="${extra_options} rs6000/aix64.opt"
2039         use_collect2=yes
2040         thread_file='aix'
2041         use_gcc_stdint=provide
2042         extra_headers=
2043         ;;
2044 rs6000-ibm-aix5.1.* | powerpc-ibm-aix5.1.*)
2045         tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix51.h rs6000/xcoff.h rs6000/aix-stdint.h"
2046         extra_options="${extra_options} rs6000/aix64.opt"
2047         tmake_file=rs6000/t-aix43
2048         use_collect2=yes
2049         thread_file='aix'
2050         use_gcc_stdint=wrap
2051         extra_headers=
2052         ;;
2053 rs6000-ibm-aix5.2.* | powerpc-ibm-aix5.2.*)
2054         tm_file="${tm_file} rs6000/aix.h rs6000/aix52.h rs6000/xcoff.h rs6000/aix-stdint.h"
2055         tmake_file=rs6000/t-aix52
2056         extra_options="${extra_options} rs6000/aix64.opt"
2057         use_collect2=yes
2058         thread_file='aix'
2059         use_gcc_stdint=wrap
2060         extra_headers=
2061         ;;
2062 rs6000-ibm-aix5.3.* | powerpc-ibm-aix5.3.*)
2063         tm_file="${tm_file} rs6000/aix.h rs6000/aix53.h rs6000/xcoff.h rs6000/aix-stdint.h"
2064         tmake_file=rs6000/t-aix52
2065         extra_options="${extra_options} rs6000/aix64.opt"
2066         use_collect2=yes
2067         thread_file='aix'
2068         use_gcc_stdint=wrap
2069         extra_headers=altivec.h
2070         ;;
2071 rs6000-ibm-aix[6789].* | powerpc-ibm-aix[6789].*)
2072         tm_file="${tm_file} rs6000/aix.h rs6000/aix61.h rs6000/xcoff.h rs6000/aix-stdint.h"
2073         tmake_file=rs6000/t-aix52
2074         extra_options="${extra_options} rs6000/aix64.opt"
2075         use_collect2=yes
2076         thread_file='aix'
2077         use_gcc_stdint=wrap
2078         extra_headers=altivec.h
2079         ;;
2080 rx-*-elf*)
2081         tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file} ../../libgcc/config/rx/rx-abi.h"
2082         tmake_file="${tmake_file} rx/t-rx"
2083         ;;
2084 s390-*-linux*)
2085         tm_file="s390/s390.h dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h s390/linux.h"
2086         ;;
2087 s390x-*-linux*)
2088         tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h s390/linux.h"
2089         tm_p_file=s390/s390-protos.h
2090         md_file=s390/s390.md
2091         extra_modes=s390/s390-modes.def
2092         out_file=s390/s390.c
2093         tmake_file="${tmake_file} s390/t-linux64"
2094         ;;
2095 s390x-ibm-tpf*)
2096         tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h s390/tpf.h"
2097         tm_p_file=s390/s390-protos.h
2098         md_file=s390/s390.md
2099         extra_modes=s390/s390-modes.def
2100         out_file=s390/s390.c
2101         extra_parts="crtbeginS.o crtendS.o"
2102         thread_file='tpf'
2103         extra_options="${extra_options} s390/tpf.opt"
2104         ;;
2105 score-*-elf)
2106         tm_file="dbxelf.h elfos.h score/elf.h score/score.h newlib-stdint.h"
2107         tmake_file=score/t-score-elf
2108         extra_objs="score7.o score3.o"
2109         ;;
2110 sh-*-elf* | sh[12346l]*-*-elf* | \
2111 sh-*-symbianelf* | sh[12346l]*-*-symbianelf* | \
2112   sh-*-linux* | sh[2346lbe]*-*-linux* | \
2113   sh-*-netbsdelf* | shl*-*-netbsdelf* | sh5-*-netbsd* | sh5l*-*-netbsd* | \
2114    sh64-*-netbsd* | sh64l*-*-netbsd*)
2115         tmake_file="${tmake_file} sh/t-sh sh/t-elf"
2116         if test x${with_endian} = x; then
2117                 case ${target} in
2118                 sh[1234]*be-*-* | sh[1234]*eb-*-*) with_endian=big ;;
2119                 shbe-*-* | sheb-*-*)               with_endian=big,little ;;
2120                 sh[1234]l* | sh[34]*-*-linux*)     with_endian=little ;;
2121                 shl* | sh64l* | sh*-*-linux* | \
2122                   sh5l* | sh-superh-elf)           with_endian=little,big ;;
2123                 sh[1234]*-*-*)                     with_endian=big ;;
2124                 *)                                 with_endian=big,little ;;
2125                 esac
2126         fi
2127         # TM_ENDIAN_CONFIG is used by t-sh to determine multilibs.
2128         #  First word : the default endian.
2129         #  Second word: the secondary endian (optional).
2130         case ${with_endian} in
2131         big)            TM_ENDIAN_CONFIG=mb ;;
2132         little)         TM_ENDIAN_CONFIG=ml ;;
2133         big,little)     TM_ENDIAN_CONFIG="mb ml" ;;
2134         little,big)     TM_ENDIAN_CONFIG="ml mb" ;;
2135         *)      echo "with_endian=${with_endian} not supported."; exit 1 ;;
2136         esac
2137         case ${with_endian} in
2138         little*)        tm_file="sh/little.h ${tm_file}" ;;
2139         esac
2140         tm_file="${tm_file} dbxelf.h elfos.h"
2141         case ${target} in
2142         sh*-*-netbsd*)  ;;
2143         *)              tm_file="${tm_file} svr4.h" ;;
2144         esac
2145         tm_file="${tm_file} sh/elf.h"
2146         case ${target} in
2147         sh*-*-linux*)   tmake_file="${tmake_file} sh/t-linux"
2148                         tm_file="${tm_file} linux.h glibc-stdint.h sh/linux.h" ;;
2149         sh*-*-netbsd*)  tm_file="${tm_file} netbsd.h netbsd-elf.h sh/netbsd-elf.h" ;;
2150         sh*-superh-elf) if test x$with_libgloss != xno; then
2151                                 with_libgloss=yes
2152                                 tm_file="${tm_file} sh/newlib.h"
2153                         fi
2154                         tm_file="${tm_file} sh/embed-elf.h"
2155                         tm_file="${tm_file} sh/superh.h"
2156                         tmake_file="${tmake_file} sh/t-superh"
2157                         extra_options="${extra_options} sh/superh.opt" ;;
2158         *)              if test x$with_newlib = xyes \
2159                            && test x$with_libgloss = xyes; then
2160                                 tm_file="${tm_file} sh/newlib.h"
2161                         fi
2162                         tm_file="${tm_file} sh/embed-elf.h" ;;
2163         esac
2164         case ${target} in
2165         sh5*-*-netbsd*)
2166                 # SHmedia, 32-bit ABI
2167                 tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd"
2168                 ;;
2169         sh64*-netbsd*)
2170                 # SHmedia, 64-bit ABI
2171                 tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd sh/t-netbsd-sh5-64"
2172                 ;;
2173         *-*-netbsd)
2174                 tmake_file="${tmake_file} sh/t-netbsd"
2175                 ;;
2176         sh64*-*-linux*)
2177                 tmake_file="${tmake_file} sh/t-sh64 sh/t-linux64"
2178                 tm_file="${tm_file} sh/sh64.h"
2179                 extra_headers="shmedia.h ushmedia.h sshmedia.h"
2180                 ;;
2181         sh64*)
2182                 tmake_file="${tmake_file} sh/t-sh64"
2183                 tm_file="${tm_file} sh/sh64.h"
2184                 extra_headers="shmedia.h ushmedia.h sshmedia.h"
2185                 ;;
2186         *-*-symbianelf*)
2187                 tmake_file="sh/t-symbian"
2188                 tm_file="sh/symbian-pre.h sh/little.h ${tm_file} sh/symbian-post.h"
2189                 c_target_objs="symbian-base.o symbian-c.o"
2190                 cxx_target_objs="symbian-base.o symbian-cxx.o"
2191                 extra_parts="crt1.o crti.o crtn.o crtbegin.o crtend.o crtbeginS.o crtendS.o"
2192                 ;;
2193         *-*-elf*)
2194                 tm_file="${tm_file} newlib-stdint.h"
2195                 ;;
2196         esac
2197         # sed el/eb endian suffixes away to avoid confusion with sh[23]e
2198         case `echo ${target} | sed 's/e[lb]-/-/'` in
2199         sh64*-*-netbsd*)        sh_cpu_target=sh5-64media ;;
2200         sh64* | sh5*-*-netbsd*) sh_cpu_target=sh5-32media ;;
2201         sh4a_single_only*)      sh_cpu_target=sh4a-single-only ;;
2202         sh4a_single*)           sh_cpu_target=sh4a-single ;;
2203         sh4a_nofpu*)            sh_cpu_target=sh4a-nofpu ;;
2204         sh4al)                  sh_cpu_target=sh4al ;;
2205         sh4a*)                  sh_cpu_target=sh4a ;;
2206         sh4_single_only*)       sh_cpu_target=sh4-single-only ;;
2207         sh4_single*)            sh_cpu_target=sh4-single ;;
2208         sh4_nofpu*)             sh_cpu_target=sh4-nofpu ;;
2209         sh4* | sh-superh-*)     sh_cpu_target=sh4 ;;
2210         sh3e*)                  sh_cpu_target=sh3e ;;
2211         sh*-*-netbsd* | sh3*)   sh_cpu_target=sh3 ;;
2212         sh2a_single_only*)      sh_cpu_target=sh2a-single-only ;;
2213         sh2a_single*)           sh_cpu_target=sh2a-single ;;
2214         sh2a_nofpu*)            sh_cpu_target=sh2a-nofpu ;;
2215         sh2a*)                  sh_cpu_target=sh2a ;;
2216         sh2e*)                  sh_cpu_target=sh2e ;;
2217         sh2*)                   sh_cpu_target=sh2 ;;
2218         *)                      sh_cpu_target=sh1 ;;
2219         esac
2220         # did the user say --without-fp ?
2221         if test x$with_fp = xno; then
2222                 case ${sh_cpu_target} in
2223                 sh5-*media)     sh_cpu_target=${sh_cpu_target}-nofpu ;;
2224                 sh4al | sh1)    ;;
2225                 sh4a* )         sh_cpu_target=sh4a-nofpu ;;
2226                 sh4*)           sh_cpu_target=sh4-nofpu ;;
2227                 sh3*)           sh_cpu_target=sh3 ;;
2228                 sh2a*)          sh_cpu_target=sh2a-nofpu ;;
2229                 sh2*)           sh_cpu_target=sh2 ;;
2230                 *)      echo --without-fp not available for $target: ignored
2231                 esac
2232                 tm_defines="$tm_defines STRICT_NOFPU=1"
2233         fi
2234         sh_cpu_default="`echo $with_cpu|sed s/^m/sh/|tr A-Z_ a-z-`"
2235         case $sh_cpu_default in
2236         sh5-64media-nofpu | sh5-64media | \
2237           sh5-32media-nofpu | sh5-32media | sh5-compact-nofpu | sh5-compact | \
2238           sh2a-single-only | sh2a-single | sh2a-nofpu | sh2a | \
2239           sh4a-single-only | sh4a-single | sh4a-nofpu | sh4a | sh4al | \
2240           sh4-single-only | sh4-single | sh4-nofpu | sh4 | sh4-300 | \
2241           sh3e | sh3 | sh2e | sh2 | sh1) ;;
2242         "")     sh_cpu_default=${sh_cpu_target} ;;
2243         *)      echo "with_cpu=$with_cpu not supported"; exit 1 ;;
2244         esac
2245         sh_multilibs=${with_multilib_list}
2246         if test "$sh_multilibs" = "default" ; then
2247                 case ${target} in
2248                 sh64-superh-linux* | \
2249                 sh[1234]*)      sh_multilibs=${sh_cpu_target} ;;
2250                 sh64* | sh5*)   sh_multilibs=m5-32media,m5-32media-nofpu,m5-compact,m5-compact-nofpu,m5-64media,m5-64media-nofpu ;;
2251                 sh-superh-*)    sh_multilibs=m4,m4-single,m4-single-only,m4-nofpu ;;
2252                 sh*-*-linux*)   sh_multilibs=m1,m3e,m4 ;;
2253                 sh*-*-netbsd*)  sh_multilibs=m3,m3e,m4 ;;
2254                 *) sh_multilibs=m1,m2,m2e,m4,m4-single,m4-single-only,m2a,m2a-single ;;
2255                 esac
2256                 if test x$with_fp = xno; then
2257                         sh_multilibs="`echo $sh_multilibs|sed -e s/m4/sh4-nofpu/ -e s/,m4-[^,]*//g -e s/,m[23]e// -e s/m2a,m2a-single/m2a-nofpu/ -e s/m5-..m....,//g`"
2258                 fi
2259         fi
2260         target_cpu_default=SELECT_`echo ${sh_cpu_default}|tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`
2261         tm_defines=${tm_defines}' SH_MULTILIB_CPU_DEFAULT=\"'`echo $sh_cpu_default|sed s/sh/m/`'\"'
2262         tm_defines="$tm_defines SUPPORT_`echo $sh_cpu_default | sed 's/^m/sh/' | tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`=1"
2263         sh_multilibs=`echo $sh_multilibs | sed -e 's/,/ /g' -e 's/^sh/m/i' -e 's/ sh/ m/gi' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz-`
2264         for sh_multilib in ${sh_multilibs}; do
2265                 case ${sh_multilib} in
2266                 m1 | m2 | m2e | m3 | m3e | \
2267                 m4 | m4-single | m4-single-only | m4-nofpu | m4-300 |\
2268                 m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al | \
2269                 m2a | m2a-single | m2a-single-only | m2a-nofpu | \
2270                 m5-64media | m5-64media-nofpu | \
2271                 m5-32media | m5-32media-nofpu | \
2272                 m5-compact | m5-compact-nofpu)
2273                         # TM_MULTILIB_CONFIG is used by t-sh for the non-endian multilib definition
2274                         # It is passed to MULTIILIB_OPTIONS verbatim.
2275                         TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG}/${sh_multilib}"
2276                         tm_defines="$tm_defines SUPPORT_`echo $sh_multilib | sed 's/^m/sh/' | tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`=1"
2277                         ;;
2278                 \!*)    # TM_MULTILIB_EXCEPTIONS_CONFIG is used by t-sh
2279                         # It is passed the MULTILIB_EXCEPTIONS verbatim.
2280                         TM_MULTILIB_EXCEPTIONS_CONFIG="${TM_MULTILIB_EXCEPTIONS_CONFIG} `echo $sh_multilib | sed 's/^!//'`" ;;
2281                 *)
2282                         echo "with_multilib_list=${sh_multilib} not supported."
2283                         exit 1
2284                         ;;
2285                 esac
2286         done
2287         TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's:^/::'`
2288         if test x${enable_incomplete_targets} = xyes ; then
2289                 tm_defines="$tm_defines SUPPORT_SH1=1 SUPPORT_SH2E=1 SUPPORT_SH4=1 SUPPORT_SH4_SINGLE=1 SUPPORT_SH2A=1 SUPPORT_SH2A_SINGLE=1 SUPPORT_SH5_32MEDIA=1 SUPPORT_SH5_32MEDIA_NOFPU=1 SUPPORT_SH5_64MEDIA=1 SUPPORT_SH5_64MEDIA_NOFPU=1"
2290         fi
2291         tm_file="$tm_file ./sysroot-suffix.h"
2292         tmake_file="$tmake_file t-sysroot-suffix"
2293         ;;
2294 sh-*-rtems*)
2295         tmake_file="sh/t-sh sh/t-elf t-rtems sh/t-rtems"
2296         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h newlib-stdint.h"
2297         ;;
2298 sh-wrs-vxworks)
2299         tmake_file="$tmake_file sh/t-sh sh/t-elf sh/t-vxworks"
2300         tm_file="${tm_file} elfos.h svr4.h sh/elf.h sh/embed-elf.h vx-common.h vxworks.h sh/vxworks.h"
2301         ;;
2302 sparc-*-netbsdelf*)
2303         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
2304         extra_options="${extra_options} sparc/long-double-switch.opt"
2305         ;;
2306 sparc64-*-openbsd*)
2307         tm_file="sparc/openbsd1-64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h"
2308         tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h sparc/openbsd64.h"
2309         extra_options="${extra_options} sparc/little-endian.opt"
2310         gas=yes gnu_ld=yes
2311         with_cpu=ultrasparc
2312         ;;
2313 sparc-*-elf*)
2314         tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h svr4.h sparc/sysv4.h sparc/sp-elf.h"
2315         tmake_file="sparc/t-elf sparc/t-crtfm"
2316         extra_parts="crti.o crtn.o crtbegin.o crtend.o"
2317         ;;
2318 sparc-*-linux*)         # SPARC's running GNU/Linux, libc6
2319         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h linux.h glibc-stdint.h"
2320         extra_options="${extra_options} sparc/long-double-switch.opt"
2321         tmake_file="${tmake_file} sparc/t-linux"
2322         if test x$enable_targets = xall; then
2323                 tm_file="sparc/biarch64.h ${tm_file} sparc/linux64.h"
2324                 tmake_file="${tmake_file} sparc/t-linux64"
2325         else
2326                 tm_file="${tm_file} sparc/linux.h"
2327         fi
2328         tmake_file="${tmake_file} sparc/t-crtfm"
2329         ;;
2330 sparc-*-rtems*)
2331         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp-elf.h sparc/rtemself.h rtems.h newlib-stdint.h"
2332         tmake_file="sparc/t-elf sparc/t-crtfm t-rtems"
2333         extra_parts="crti.o crtn.o crtbegin.o crtend.o"
2334         ;;
2335 sparc64-*-solaris2* | sparcv9-*-solaris2*)
2336         tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h"
2337         case ${target} in
2338         *-*-solaris2.1[0-9]*)
2339                 tm_file="${tm_file} sol2-10.h"
2340                 use_gcc_stdint=wrap
2341                 ;;
2342         *)
2343                 use_gcc_stdint=provide
2344                 ;;
2345         esac
2346         tm_file="${tm_file} sparc/sol2.h sparc/sol2-64.h sparc/sol2-bi.h"
2347         if test x$gnu_ld = xyes; then
2348                 tm_file="${tm_file} sparc/sol2-gld.h sparc/sol2-gld-bi.h"
2349         fi
2350         if test x$gas = xyes; then
2351                 tm_file="${tm_file} sparc/sol2-gas.h sparc/sol2-gas-bi.h"
2352         fi
2353         tm_file="${tm_file} tm-dwarf2.h"
2354         tmake_file="t-sol2 sparc/t-sol2 sparc/t-sol2-64 sparc/t-crtfm"
2355         if test x$gnu_ld = xyes; then
2356                 tmake_file="$tmake_file t-slibgcc-elf-ver"
2357         else
2358                 tmake_file="$tmake_file t-slibgcc-sld"
2359         fi
2360         c_target_objs="sol2-c.o"
2361         cxx_target_objs="sol2-c.o"
2362         extra_objs="sol2.o"
2363         tm_p_file="${tm_p_file} sol2-protos.h"
2364         extra_parts="crt1.o crti.o crtn.o gcrt1.o crtbegin.o crtend.o"
2365         case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
2366           "":yes:* | yes:yes:* ) thread_file=posix ;;
2367           "":*:yes | yes:*:yes ) thread_file=solaris ;;
2368         esac
2369         ;;
2370 sparc-*-solaris2*)
2371         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h"
2372         case ${target} in
2373         *-*-solaris2.1[0-9]*)
2374                 tm_file="${tm_file} sol2-10.h"
2375                 use_gcc_stdint=wrap
2376                 ;;
2377         *)
2378                 use_gcc_stdint=provide
2379                 ;;
2380         esac
2381         tm_file="${tm_file} sparc/sol2.h"
2382         if test x$gnu_ld = xyes; then
2383                 tm_file="${tm_file} sparc/sol2-gld.h"
2384         fi
2385         if test x$gas = xyes; then
2386                 tm_file="${tm_file} sparc/sol2-gas.h"
2387         fi
2388         tmake_file="t-sol2 sparc/t-sol2 sparc/t-crtfm"
2389         if test x$gnu_ld = xyes; then
2390                 tmake_file="$tmake_file t-slibgcc-elf-ver"
2391         else
2392                 tmake_file="$tmake_file t-slibgcc-sld"
2393         fi
2394         tm_file="sparc/biarch64.h ${tm_file} sparc/sol2-bi.h"
2395         if test x$gnu_ld = xyes; then
2396                 tm_file="${tm_file} sparc/sol2-gld-bi.h"
2397         fi
2398         if test x$gas = xyes; then
2399                 tm_file="${tm_file} sparc/sol2-gas-bi.h"
2400         fi
2401         tm_file="${tm_file} tm-dwarf2.h"
2402         tmake_file="$tmake_file sparc/t-sol2-64"
2403         test x$with_cpu != x || with_cpu=v9
2404         c_target_objs="sol2-c.o"
2405         cxx_target_objs="sol2-c.o"
2406         extra_objs="sol2.o"
2407         tm_p_file="${tm_p_file} sol2-protos.h"
2408         extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
2409         case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
2410           "":yes:* | yes:yes:* )
2411                 thread_file=posix
2412                 ;;
2413           "":*:yes | yes:*:yes )
2414                 thread_file=solaris
2415                 ;;
2416         esac
2417         ;;
2418 sparc-wrs-vxworks)
2419         tm_file="${tm_file} elfos.h svr4.h sparc/sysv4.h vx-common.h vxworks.h sparc/vxworks.h"
2420         tmake_file="${tmake_file} sparc/t-vxworks"
2421         ;;
2422 sparc64-*-elf*)
2423         tm_file="${tm_file} dbxelf.h elfos.h svr4.h newlib-stdint.h sparc/sysv4.h sparc/sp64-elf.h"
2424         extra_options="${extra_options} sparc/little-endian.opt"
2425         tmake_file="${tmake_file} sparc/t-crtfm"
2426         extra_parts="crtbegin.o crtend.o"
2427         ;;
2428 sparc64-*-freebsd*|ultrasparc-*-freebsd*)
2429         tm_file="${tm_file} ${fbsd_tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/freebsd.h"
2430         extra_options="${extra_options} sparc/long-double-switch.opt"
2431         tmake_file="${tmake_file} sparc/t-crtfm"
2432         case "x$with_cpu" in
2433                 xultrasparc) ;;
2434                 x) with_cpu=ultrasparc ;;
2435                 *) echo "$with_cpu not supported for freebsd target"; exit 1 ;;
2436         esac
2437         ;;
2438 sparc64-*-linux*)               # 64-bit SPARC's running GNU/Linux
2439         tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h linux.h glibc-stdint.h sparc/linux64.h"
2440         extra_options="${extra_options} sparc/long-double-switch.opt"
2441         tmake_file="${tmake_file} sparc/t-linux sparc/t-linux64 sparc/t-crtfm"
2442         ;;
2443 sparc64-*-netbsd*)
2444         tm_file="sparc/biarch64.h ${tm_file}"
2445         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
2446         extra_options="${extra_options} sparc/long-double-switch.opt"
2447         tmake_file="${tmake_file} sparc/t-netbsd64"
2448         ;;
2449 spu-*-elf*)
2450         tm_file="dbxelf.h elfos.h spu/spu-elf.h spu/spu.h newlib-stdint.h"
2451         tmake_file="spu/t-spu-elf"
2452         extra_headers="spu_intrinsics.h spu_internals.h vmx2spu.h spu_mfcio.h vec_types.h spu_cache.h"
2453         extra_modes=spu/spu-modes.def
2454         c_target_objs="${c_target_objs} spu-c.o"
2455         cxx_target_objs="${cxx_target_objs} spu-c.o"
2456         ;;
2457 v850e1-*-*)
2458         target_cpu_default="TARGET_CPU_v850e1"
2459         tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h v850/v850.h"
2460         tm_p_file=v850/v850-protos.h
2461         tmake_file=v850/t-v850e
2462         md_file=v850/v850.md
2463         out_file=v850/v850.c
2464         extra_options="${extra_options} v850/v850.opt"
2465         if test x$stabs = xyes
2466         then
2467                 tm_file="${tm_file} dbx.h"
2468         fi
2469         use_collect2=no
2470         c_target_objs="v850-c.o"
2471         cxx_target_objs="v850-c.o"
2472         use_gcc_stdint=wrap
2473         ;;
2474 v850e-*-*)
2475         target_cpu_default="TARGET_CPU_v850e"
2476         tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h v850/v850.h"
2477         tm_p_file=v850/v850-protos.h
2478         tmake_file=v850/t-v850e
2479         md_file=v850/v850.md
2480         out_file=v850/v850.c
2481         extra_options="${extra_options} v850/v850.opt"
2482         if test x$stabs = xyes
2483         then
2484                 tm_file="${tm_file} dbx.h"
2485         fi
2486         use_collect2=no
2487         c_target_objs="v850-c.o"
2488         cxx_target_objs="v850-c.o"
2489         use_gcc_stdint=wrap
2490         ;;
2491 v850-*-*)
2492         target_cpu_default="TARGET_CPU_generic"
2493         tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file}"
2494         tmake_file=v850/t-v850
2495         if test x$stabs = xyes
2496         then
2497                 tm_file="${tm_file} dbx.h"
2498         fi
2499         use_collect2=no
2500         c_target_objs="v850-c.o"
2501         cxx_target_objs="v850-c.o"
2502         use_gcc_stdint=wrap
2503         ;;
2504 vax-*-linux*)
2505         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h vax/elf.h vax/linux.h"
2506         tmake_file="${tmake_file} vax/t-linux"
2507         ;;
2508 vax-*-netbsdelf*)
2509         tm_file="${tm_file} elfos.h netbsd.h netbsd-elf.h vax/elf.h vax/netbsd-elf.h"
2510         ;;
2511 vax-*-netbsd*)
2512         tm_file="${tm_file} netbsd.h netbsd-aout.h vax/netbsd.h"
2513         tmake_file=t-netbsd
2514         extra_parts=""
2515         use_collect2=yes
2516         ;;
2517 vax-*-openbsd*)
2518         tm_file="vax/vax.h vax/openbsd1.h openbsd.h openbsd-stdint.h openbsd-pthread.h vax/openbsd.h"
2519         use_collect2=yes
2520         ;;
2521 xstormy16-*-elf)
2522         # For historical reasons, the target files omit the 'x'.
2523         tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h stormy16/stormy16.h"
2524         tm_p_file=stormy16/stormy16-protos.h
2525         md_file=stormy16/stormy16.md
2526         out_file=stormy16/stormy16.c
2527         extra_options=stormy16/stormy16.opt
2528         tmake_file="stormy16/t-stormy16"
2529         extra_parts="crtbegin.o crtend.o"
2530         ;;
2531 xtensa*-*-elf*)
2532         tm_file="${tm_file} dbxelf.h elfos.h svr4.h newlib-stdint.h xtensa/elf.h"
2533         tmake_file="xtensa/t-xtensa xtensa/t-elf"
2534         ;;
2535 xtensa*-*-linux*)
2536         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h glibc-stdint.h xtensa/linux.h"
2537         tmake_file="${tmake_file} xtensa/t-xtensa xtensa/t-linux"
2538         ;;
2539 am33_2.0-*-linux*)
2540         tm_file="mn10300/mn10300.h dbxelf.h elfos.h linux.h glibc-stdint.h mn10300/linux.h"
2541         tmake_file="${tmake_file} mn10300/t-linux"
2542         gas=yes gnu_ld=yes
2543         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
2544         use_collect2=no
2545         ;;
2546 m32c-*-rtems*)
2547         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} m32c/rtems.h rtems.h newlib-stdint.h"
2548         tmake_file="${tmake_file} t-rtems"
2549         c_target_objs="m32c-pragma.o"
2550         cxx_target_objs="m32c-pragma.o"
2551         ;;
2552 m32c-*-elf*)
2553         tm_file="dbxelf.h elfos.h svr4.h newlib-stdint.h ${tm_file}"
2554         c_target_objs="m32c-pragma.o"
2555         cxx_target_objs="m32c-pragma.o"
2556         ;;
2557 *)
2558         echo "*** Configuration ${target} not supported" 1>&2
2559         exit 1
2560         ;;
2561 esac
2562
2563 case ${target} in
2564 i[34567]86-*-linux* | x86_64-*-linux*)
2565         tmake_file="${tmake_file} i386/t-pmm_malloc i386/t-i386"
2566         ;;
2567 i[34567]86-*-* | x86_64-*-*)
2568         tmake_file="${tmake_file} i386/t-gmm_malloc i386/t-i386"
2569         ;;
2570 powerpc*-*-* | rs6000-*-*)
2571         tm_file="${tm_file} rs6000/option-defaults.h"
2572 esac
2573
2574 # Support for --with-cpu and related options (and a few unrelated options,
2575 # too).
2576 case ${with_cpu} in
2577   yes | no)
2578     echo "--with-cpu must be passed a value" 1>&2
2579     exit 1
2580     ;;
2581 esac
2582
2583 # If there is no $with_cpu option, try to infer one from ${target}.
2584 # This block sets nothing except for with_cpu.
2585 if test x$with_cpu = x ; then
2586   case ${target} in
2587     i386-*-*)
2588       with_cpu=i386
2589       ;;
2590     i486-*-*)
2591       with_cpu=i486
2592       ;;
2593     i586-*-*)
2594       case ${target_noncanonical} in
2595         k6_2-*)
2596           with_cpu=k6-2
2597           ;;
2598         k6_3-*)
2599           with_cpu=k6-3
2600           ;;
2601         k6-*)
2602           with_cpu=k6
2603           ;;
2604         pentium_mmx-*|winchip_c6-*|winchip2-*|c3-*)
2605           with_cpu=pentium-mmx
2606           ;;
2607         *)
2608           with_cpu=pentium
2609           ;;
2610       esac
2611       ;;
2612     i686-*-* | i786-*-*)
2613       case ${target_noncanonical} in
2614         amdfam10-*|barcelona-*)
2615           with_cpu=amdfam10
2616           ;;
2617         k8-*|opteron-*|athlon_64-*)
2618           with_cpu=k8
2619           ;;
2620         athlon_xp-*|athlon_mp-*|athlon_4-*)
2621           with_cpu=athlon-4
2622           ;;
2623         athlon_tbird-*|athlon-*)
2624           with_cpu=athlon
2625           ;;
2626         geode-*)
2627           with_cpu=geode
2628           ;;
2629         pentium2-*)
2630           with_cpu=pentium2
2631           ;;
2632         pentium3-*|pentium3m-*)
2633           with_cpu=pentium3
2634           ;;
2635         pentium4-*|pentium4m-*)
2636           with_cpu=pentium4
2637           ;;
2638         prescott-*)
2639           with_cpu=prescott
2640           ;;
2641         nocona-*)
2642           with_cpu=nocona
2643           ;;
2644         core2-*)
2645           with_cpu=core2
2646           ;;
2647         pentium_m-*)
2648           with_cpu=pentium-m
2649           ;;
2650         pentiumpro-*)
2651           with_cpu=pentiumpro
2652           ;;
2653         *)
2654           with_cpu=generic
2655           ;;
2656       esac
2657       ;;
2658     x86_64-*-*)
2659       case ${target_noncanonical} in
2660         amdfam10-*|barcelona-*)
2661           with_cpu=amdfam10
2662           ;;
2663         k8-*|opteron-*|athlon_64-*)
2664           with_cpu=k8
2665           ;;
2666         nocona-*)
2667           with_cpu=nocona
2668           ;;
2669         core2-*)
2670           with_cpu=core2
2671           ;;
2672         *)
2673           with_cpu=generic
2674           ;;
2675       esac
2676       ;;
2677     alphaev6[78]*-*-*)
2678       with_cpu=ev67
2679       ;;
2680     alphaev6*-*-*)
2681       with_cpu=ev6
2682       ;;
2683     alphapca56*-*-*)
2684       with_cpu=pca56
2685       ;;
2686     alphaev56*-*-*)
2687       with_cpu=ev56
2688       ;;
2689     alphaev5*-*-*)
2690       with_cpu=ev5
2691       ;;
2692     frv-*-*linux* | frv400-*-*linux*)
2693       with_cpu=fr400
2694       ;;
2695     frv550-*-*linux*)
2696       with_cpu=fr550
2697       ;;
2698     m68k*-*-*)
2699       case "$with_arch" in
2700         "cf")
2701           with_cpu=${default_cf_cpu}
2702           ;;
2703         "" | "m68k")
2704           with_cpu=m${default_m68k_cpu}
2705           ;;
2706       esac
2707       ;;
2708     mips*-*-vxworks)
2709       with_arch=mips2
2710       ;;
2711     sparc*-*-*)
2712       with_cpu="`echo ${target} | sed 's/-.*$//'`"
2713       ;;
2714   esac
2715
2716   # Avoid overriding --with-cpu-32 and --with-cpu-64 values.
2717   case ${target} in
2718     i[34567]86-*-*|x86_64-*-*)
2719       if test x$with_cpu != x; then
2720         if test x$with_cpu_32 != x || test x$with_cpu_64 != x; then
2721           if test x$with_cpu_32 = x; then
2722             with_cpu_32=$with_cpu
2723           fi
2724           if test x$with_cpu_64 = x; then
2725             with_cpu_64=$with_cpu
2726           fi
2727           with_cpu=
2728         fi
2729       fi
2730       ;;
2731   esac
2732 fi
2733
2734 # Similarly for --with-schedule.
2735 if test x$with_schedule = x; then
2736         case ${target} in
2737         hppa1*)
2738                 # Override default PA8000 scheduling model.
2739                 with_schedule=7100LC
2740                 ;;
2741         esac
2742 fi
2743
2744 # Validate and mark as valid any --with options supported
2745 # by this target.  In order to use a particular --with option
2746 # you must list it in supported_defaults; validating the value
2747 # is optional.  This case statement should set nothing besides
2748 # supported_defaults.
2749
2750 supported_defaults=
2751 case "${target}" in
2752         alpha*-*-*)
2753                 supported_defaults="cpu tune"
2754                 for which in cpu tune; do
2755                         eval "val=\$with_$which"
2756                         case "$val" in
2757                         "" \
2758                         | ev4 | ev45 | 21064 | ev5 | 21164 | ev56 | 21164a \
2759                         | pca56 | 21164PC | 21164pc | ev6 | 21264 | ev67 \
2760                         | 21264a)
2761                                 ;;
2762                         *)
2763                                 echo "Unknown CPU used in --with-$which=$val" 1>&2
2764                                 exit 1
2765                                 ;;
2766                         esac
2767                 done
2768                 ;;
2769
2770         arm*-*-*)
2771                 supported_defaults="arch cpu float tune fpu abi mode"
2772                 for which in cpu tune; do
2773                         # See if it matches any of the entries in arm-cores.def
2774                         eval "val=\$with_$which"
2775                         if [ x"$val" = x ] \
2776                             || grep "^ARM_CORE(\"$val\"," \
2777                                     ${srcdir}/config/arm/arm-cores.def \
2778                                     > /dev/null; then
2779                           # Ok
2780                           new_val=`grep "^ARM_CORE(\"$val\"," \
2781                                 ${srcdir}/config/arm/arm-cores.def | \
2782                                 sed -e 's/^[^,]*,[      ]*//' | \
2783                                 sed -e 's/,.*$//'`
2784                           eval "target_${which}_cname=$new_val"
2785                         echo "For $val real value is $new_val"
2786                           true
2787                         else
2788                           echo "Unknown CPU used in --with-$which=$val" 1>&2
2789                           exit 1
2790                         fi
2791                 done
2792
2793                 case "$with_arch" in
2794                 "" \
2795                 | armv[23456] | armv2a | armv3m | armv4t | armv5t \
2796                 | armv5te | armv6j |armv6k | armv6z | armv6zk | armv6-m \
2797                 | armv7 | armv7-a | armv7-r | armv7-m \
2798                 | iwmmxt | ep9312)
2799                         # OK
2800                         ;;
2801                 *)
2802                         echo "Unknown arch used in --with-arch=$with_arch" 1>&2
2803                         exit 1
2804                         ;;
2805                 esac
2806
2807                 case "$with_float" in
2808                 "" \
2809                 | soft | hard | softfp)
2810                         # OK
2811                         ;;
2812                 *)
2813                         echo "Unknown floating point type used in --with-float=$with_float" 1>&2
2814                         exit 1
2815                         ;;
2816                 esac
2817
2818                 case "$with_fpu" in
2819                 "" \
2820                 | fpa | fpe2 | fpe3 | maverick | vfp | vfp3 | vfpv3 | vfpv3-fp16 | vfpv3-d16 | vfpv3-d16-fp16 | vfpv3xd | vfpv3xd-fp16 | neon | neon-fp16 )
2821                         # OK
2822                         ;;
2823                 *)
2824                         echo "Unknown fpu used in --with-fpu=$with_fpu" 2>&1
2825                         exit 1
2826                         ;;
2827                 esac
2828
2829                 case "$with_abi" in
2830                 "" \
2831                 | apcs-gnu | atpcs | aapcs | iwmmxt | aapcs-linux )
2832                         #OK
2833                         ;;
2834                 *)
2835                         echo "Unknown ABI used in --with-abi=$with_abi"
2836                         exit 1
2837                         ;;
2838                 esac
2839
2840                 case "$with_mode" in
2841                 "" \
2842                 | arm | thumb )
2843                         #OK
2844                         ;;
2845                 *)
2846                         echo "Unknown mode used in --with-mode=$with_mode"
2847                         exit 1
2848                         ;;
2849                 esac
2850
2851                 if test "x$with_arch" != x && test "x$with_cpu" != x; then
2852                         echo "Warning: --with-arch overrides --with-cpu=$with_cpu" 1>&2
2853                 fi
2854                 ;;
2855
2856         fr*-*-*linux*)
2857                 supported_defaults=cpu
2858                 case "$with_cpu" in
2859                 fr400) ;;
2860                 fr550) ;;
2861                 *)
2862                         echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
2863                         exit 1
2864                         ;;
2865                 esac
2866                 ;;
2867
2868         fido-*-* | m68k*-*-*)
2869                 supported_defaults="arch cpu"
2870                 case "$with_arch" in
2871                 "" | "m68k"| "cf")
2872                         m68k_arch_family="$with_arch"
2873                         ;;
2874                 *)
2875                         echo "Invalid --with-arch=$with_arch" 1>&2
2876                         exit 1
2877                         ;;
2878                 esac
2879
2880                 # We always have a $with_cpu setting here.
2881                 case "$with_cpu" in
2882                 "m68000" | "m68010" | "m68020" | "m68030" | "m68040" | "m68060")
2883                         m68k_cpu_ident=$with_cpu
2884                         ;;
2885                 "m68020-40")
2886                         m68k_cpu_ident=m68020
2887                         tm_defines="$tm_defines M68K_DEFAULT_TUNE=u68020_40"
2888                         ;;
2889                 "m68020-60")
2890                         m68k_cpu_ident=m68020
2891                         tm_defines="$tm_defines M68K_DEFAULT_TUNE=u68020_60"
2892                         ;;
2893                 *)
2894                         # We need the C identifier rather than the string.
2895                         m68k_cpu_ident=`awk -v arg="\"$with_cpu\"" \
2896                            'BEGIN { FS="[ \t]*[,()][ \t]*" }; \
2897                             $1 == "M68K_DEVICE" && $2 == arg { print $3 }' \
2898                                  ${srcdir}/config/m68k/m68k-devices.def`
2899                         if [ x"$m68k_cpu_ident" = x ] ; then
2900                                 echo "Unknown CPU used in --with-cpu=$with_cpu" 1>&2
2901                                 exit 1
2902                         fi
2903                         with_cpu="mcpu=$with_cpu"
2904                         ;;
2905                 esac
2906                 ;;
2907
2908         hppa*-*-*)
2909                 supported_defaults="arch schedule"
2910
2911                 case "$with_arch" in
2912                 "" | 1.0 | 1.1 | 2.0)
2913                         # OK
2914                         ;;
2915                 *)
2916                         echo "Unknown architecture used in --with-arch=$with_arch" 1>&2
2917                         exit 1
2918                         ;;
2919                 esac
2920
2921                 case "$with_schedule" in
2922                 "" | 700 | 7100 | 7100LC | 7200 | 7300 | 8000)
2923                         # OK
2924                         ;;
2925                 *)
2926                         echo "Unknown processor used in --with-schedule=$with_schedule." 1>&2
2927                         exit 1
2928                         ;;
2929                 esac
2930                 ;;
2931
2932         i[34567]86-*-* | x86_64-*-*)
2933                 supported_defaults="arch arch_32 arch_64 cpu cpu_32 cpu_64 tune tune_32 tune_64"
2934                 for which in arch arch_32 arch_64 cpu cpu_32 cpu_64 tune tune_32 tune_64; do
2935                         eval "val=\$with_$which"
2936                         case ${val} in
2937                         i386 | i486 \
2938                         | i586 | pentium | pentium-mmx | winchip-c6 | winchip2 \
2939                         | c3 | c3-2 | i686 | pentiumpro | pentium2 | pentium3 \
2940                         | pentium4 | k6 | k6-2 | k6-3 | athlon | athlon-tbird \
2941                         | athlon-4 | athlon-xp | athlon-mp | geode \
2942                         | prescott | pentium-m | pentium4m | pentium3m)
2943                                 case "${target}" in
2944                                   x86_64-*-*)
2945                                       case "x$which" in
2946                                         *_32)
2947                                                 ;;
2948                                         *)
2949                                                 echo "CPU given in --with-$which=$val doesn't support 64bit mode." 1>&2
2950                                                 exit 1
2951                                                 ;;
2952                                       esac
2953                                       ;;
2954                                 esac
2955                                 # OK
2956                                 ;;
2957                         "" | amdfam10 | barcelona | k8 | opteron | athlon64 | athlon-fx | nocona | core2 | atom | generic)
2958                                 # OK
2959                                 ;;
2960                         *)
2961                                 echo "Unknown CPU given in --with-$which=$val." 1>&2
2962                                 exit 1
2963                                 ;;
2964                         esac
2965                 done
2966                 ;;
2967
2968         mips*-*-*)
2969                 supported_defaults="abi arch arch_32 arch_64 float tune tune_32 tune_64 divide llsc mips-plt synci"
2970
2971                 case ${with_float} in
2972                 "" | soft | hard)
2973                         # OK
2974                         ;;
2975                 *)
2976                         echo "Unknown floating point type used in --with-float=$with_float" 1>&2
2977                         exit 1
2978                         ;;
2979                 esac
2980
2981                 case ${with_abi} in
2982                 "" | 32 | o64 | n32 | 64 | eabi)
2983                         # OK
2984                         ;;
2985                 *)
2986                         echo "Unknown ABI used in --with-abi=$with_abi" 1>&2
2987                         exit 1
2988                         ;;
2989                 esac
2990
2991                 case ${with_divide} in
2992                 "" | breaks | traps)
2993                         # OK
2994                         ;;
2995                 *)
2996                         echo "Unknown division check type use in --with-divide=$with_divide" 1>&2
2997                         exit 1
2998                         ;;
2999                 esac
3000
3001                 case ${with_llsc} in
3002                 yes)
3003                         with_llsc=llsc
3004                         ;;
3005                 no)
3006                         with_llsc="no-llsc"
3007                         ;;
3008                 "")
3009                         # OK
3010                         ;;
3011                 *)
3012                         echo "Unknown llsc type used in --with-llsc" 1>&2
3013                         exit 1
3014                         ;;
3015                 esac
3016
3017                 case ${with_mips_plt} in
3018                 yes)
3019                         with_mips_plt=plt
3020                         ;;
3021                 no)
3022                         with_mips_plt=no-plt
3023                         ;;
3024                 "")
3025                         ;;
3026                 *)
3027                         echo "Unknown --with-mips-plt argument: $with_mips_plt" 1>&2
3028                         exit 1
3029                         ;;
3030                 esac
3031
3032                 case ${with_synci} in
3033                 yes)
3034                         with_synci=synci
3035                         ;;
3036                 "" | no)
3037                         # No is the default.
3038                         with_synci=no-synci
3039                         ;;
3040                 *)
3041                         echo "Unknown synci type used in --with-synci" 1>&2
3042                         exit 1
3043                         ;;
3044                 esac
3045                 ;;
3046
3047         powerpc*-*-* | rs6000-*-*)
3048                 supported_defaults="cpu cpu_32 cpu_64 float tune tune_32 tune_64"
3049
3050                 for which in cpu cpu_32 cpu_64 tune tune_32 tune_64; do
3051                         eval "val=\$with_$which"
3052                         case ${val} in
3053                         default32 | default64)
3054                                 case $which in
3055                                 cpu | tune)
3056                                         ;;
3057                                 *)
3058                                         echo "$val only valid for --with-cpu and --with-tune." 1>&2
3059                                         exit 1
3060                                         ;;
3061                                 esac
3062                                 with_which="with_$which"
3063                                 eval $with_which=
3064                                 ;;
3065                         405cr)
3066                                 tm_defines="${tm_defines} CONFIG_PPC405CR"
3067                                 eval "with_$which=405"
3068                                 ;;
3069                         "" | common \
3070                         | power | power[234567] | power6x | powerpc | powerpc64 \
3071                         | rios | rios1 | rios2 | rsc | rsc1 | rs64a \
3072                         | 401 | 403 | 405 | 405fp | 440 | 440fp | 464 | 464fp \
3073                         | 476 | 476fp | 505 | 601 | 602 | 603 | 603e | ec603e \
3074                         | 604 | 604e | 620 | 630 | 740 | 750 | 7400 | 7450 \
3075                         | a2 | e300c[23] | 854[08] | e500mc \
3076                         | 801 | 821 | 823 | 860 | 970 | G3 | G4 | G5 | cell)
3077                                 # OK
3078                                 ;;
3079                         *)
3080                                 echo "Unknown cpu used in --with-$which=$val." 1>&2
3081                                 exit 1
3082                                 ;;
3083                         esac
3084                 done
3085                 ;;
3086
3087         s390*-*-*)
3088                 supported_defaults="arch mode tune"
3089
3090                 for which in arch tune; do
3091                         eval "val=\$with_$which"
3092                         case ${val} in
3093                         "" | g5 | g6 | z900 | z990 | z9-109 | z9-ec | z10)
3094                                 # OK
3095                                 ;;
3096                         *)
3097                                 echo "Unknown cpu used in --with-$which=$val." 1>&2
3098                                 exit 1
3099                                 ;;
3100                         esac
3101                 done
3102
3103                 case ${with_mode} in
3104                 "" | esa | zarch)
3105                         # OK
3106                         ;;
3107                 *)
3108                         echo "Unknown architecture mode used in --with-mode=$with_mode." 1>&2
3109                         exit 1
3110                         ;;
3111                 esac
3112                 ;;
3113
3114         sh[123456ble]-*-* | sh-*-*)
3115                 supported_defaults="cpu"
3116                 case "`echo $with_cpu | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz- | sed s/sh/m/`" in
3117                 "" | m1 | m2 | m2e | m3 | m3e | m4 | m4-single | m4-single-only | m4-nofpu )
3118                         # OK
3119                         ;;
3120                 m2a | m2a-single | m2a-single-only | m2a-nofpu)
3121                         ;;
3122                 m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al)
3123                         ;;
3124                 *)
3125                         echo "Unknown CPU used in --with-cpu=$with_cpu, known values:"  1>&2
3126                         echo "m1 m2 m2e m3 m3e m4 m4-single m4-single-only m4-nofpu" 1>&2
3127                         echo "m4a m4a-single m4a-single-only m4a-nofpu m4al" 1>&2
3128                         echo "m2a m2a-single m2a-single-only m2a-nofpu" 1>&2
3129                         exit 1
3130                         ;;
3131                 esac
3132                 ;;
3133         sparc*-*-*)
3134                 supported_defaults="cpu float tune"
3135
3136                 for which in cpu tune; do
3137                         eval "val=\$with_$which"
3138                         case ${val} in
3139                         "" | sparc | sparcv9 | sparc64 | sparc86x \
3140                         | v7 | cypress | v8 | supersparc | sparclite | f930 \
3141                         | f934 | hypersparc | sparclite86x | sparclet | tsc701 \
3142                         | v9 | ultrasparc | ultrasparc3 | niagara | niagara2)
3143                                 # OK
3144                                 ;;
3145                         *)
3146                                 echo "Unknown cpu used in --with-$which=$val" 1>&2
3147                                 exit 1
3148                                 ;;
3149                         esac
3150                 done
3151
3152                 case ${with_float} in
3153                 "" | soft | hard)
3154                         # OK
3155                         ;;
3156                 *)
3157                         echo "Unknown floating point type used in --with-float=$with_float" 1>&2
3158                         exit 1
3159                         ;;
3160                 esac
3161                 ;;
3162
3163         spu-*-*)
3164                 supported_defaults="arch tune"
3165
3166                 for which in arch tune; do
3167                         eval "val=\$with_$which"
3168                         case ${val} in
3169                         "" | cell | celledp)
3170                                 # OK
3171                                 ;;
3172                         *)
3173                                 echo "Unknown cpu used in --with-$which=$val." 1>&2
3174                                 exit 1
3175                                 ;;
3176                         esac
3177                 done
3178                 ;;
3179
3180         v850*-*-*)
3181                 supported_defaults=cpu
3182                 case ${with_cpu} in
3183                 "" | v850e | v850e1)
3184                         # OK
3185                         ;;
3186                 *)
3187                         echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
3188                         exit 1
3189                         ;;
3190                 esac
3191                 ;;
3192 esac
3193
3194 # Set some miscellaneous flags for particular targets.
3195 target_cpu_default2=
3196 case ${target} in
3197         alpha*-*-*)
3198                 if test x$gas = xyes
3199                 then
3200                         target_cpu_default2="MASK_GAS"
3201                 fi
3202                 ;;
3203
3204         arm*-*-*)
3205                 if test x$target_cpu_cname = x
3206                 then
3207                         target_cpu_default2=TARGET_CPU_generic
3208                 else
3209                         target_cpu_default2=TARGET_CPU_$target_cpu_cname
3210                 fi
3211                 ;;
3212
3213         hppa*-*-*)
3214                 target_cpu_default2="MASK_BIG_SWITCH"
3215                 if test x$gas = xyes
3216                 then
3217                         target_cpu_default2="${target_cpu_default2}|MASK_GAS|MASK_JUMP_IN_DELAY"
3218                 fi
3219                 ;;
3220
3221         fido*-*-* | m68k*-*-*)
3222                 target_cpu_default2=$m68k_cpu_ident
3223                 if [ x"$m68k_arch_family" != x ]; then
3224                         tmake_file="m68k/t-$m68k_arch_family $tmake_file"
3225                 fi
3226                 ;;
3227
3228         i[34567]86-*-darwin* | x86_64-*-darwin*)
3229                 tmake_file="${tmake_file} i386/t-fprules-softfp soft-fp/t-softfp"
3230                 ;;
3231         i[34567]86-*-linux* | x86_64-*-linux* | i[34567]86-*-kfreebsd*-gnu | x86_64-*-kfreebsd*-gnu)
3232                 tmake_file="${tmake_file} i386/t-fprules-softfp soft-fp/t-softfp i386/t-linux"
3233                 ;;
3234         i[34567]86-*-cygwin* | i[34567]86-*-mingw* | x86_64-*-mingw*)
3235                 tmake_file="${tmake_file} i386/t-fprules-softfp soft-fp/t-softfp"
3236                 ;;
3237         ia64*-*-linux*)
3238                 tmake_file="${tmake_file} ia64/t-fprules-softfp soft-fp/t-softfp"
3239                 ;;
3240
3241         mips*-*-*)
3242                 if test x$gnu_ld = xyes
3243                 then
3244                         target_cpu_default2="MASK_SPLIT_ADDRESSES"
3245                 fi
3246                 case ${target} in
3247                         mips*el-*-*)
3248                                 tm_defines="TARGET_ENDIAN_DEFAULT=0 $tm_defines"
3249                                 ;;
3250                 esac
3251                 if test "x$enable_gofast" = xyes
3252                 then
3253                         tm_defines="US_SOFTWARE_GOFAST $tm_defines"
3254                         tmake_file="mips/t-gofast $tmake_file"
3255                 else
3256                         tmake_file="mips/t-mips $tmake_file"
3257                 fi
3258                 ;;
3259
3260         powerpc*-*-* | rs6000-*-*)
3261                 # FIXME: The PowerPC port uses the value set at compile time,
3262                 # although it's only cosmetic.
3263                 if test "x$with_cpu" != x
3264                 then
3265                         target_cpu_default2="\\\"$with_cpu\\\""
3266                 fi
3267                 out_file=rs6000/rs6000.c
3268                 c_target_objs="${c_target_objs} rs6000-c.o"
3269                 cxx_target_objs="${cxx_target_objs} rs6000-c.o"
3270                 tmake_file="rs6000/t-rs6000 ${tmake_file}"
3271
3272                 if test x$enable_e500_double = xyes
3273                 then
3274                         tm_file="$tm_file rs6000/e500-double.h"
3275                 fi
3276                 ;;
3277
3278         sh[123456ble]*-*-* | sh-*-*)
3279                 c_target_objs="${c_target_objs} sh-c.o"
3280                 cxx_target_objs="${cxx_target_objs} sh-c.o"
3281                 ;;
3282
3283         sparc*-*-*)
3284                 # Some standard aliases.
3285                 case x$with_cpu in
3286                 xsparc)
3287                         with_cpu=v7
3288                         ;;
3289                 xsparcv9 | xsparc64)
3290                         with_cpu=v9
3291                         ;;
3292                 esac
3293
3294                 # The SPARC port checks this value at compile-time.
3295                 target_cpu_default2="TARGET_CPU_$with_cpu"
3296                 ;;
3297         v850*-*-*)
3298                 # FIXME: The v850 is "special" in that it does not support
3299                 # runtime CPU selection, only --with-cpu.
3300                 case "x$with_cpu" in
3301                 x)
3302                         ;;
3303                 xv850e)
3304                         target_cpu_default2="TARGET_CPU_$with_cpu"
3305                         ;;
3306                 esac
3307                 ;;
3308 esac
3309
3310 t=
3311 all_defaults="abi cpu cpu_32 cpu_64 arch arch_32 arch_64 tune tune_32 tune_64 schedule float mode fpu divide llsc mips-plt synci"
3312 for option in $all_defaults
3313 do
3314         eval "val=\$with_"`echo $option | sed s/-/_/g`
3315         if test -n "$val"; then
3316                 case " $supported_defaults " in
3317                 *" $option "*)
3318                         ;;
3319                 *)
3320                         echo "This target does not support --with-$option." 2>&1
3321                         echo "Valid --with options are: $supported_defaults" 2>&1
3322                         exit 1
3323                         ;;
3324                 esac
3325
3326                 if test "x$t" = x
3327                 then
3328                         t="{ \"$option\", \"$val\" }"
3329                 else
3330                         t="${t}, { \"$option\", \"$val\" }"
3331                 fi
3332         fi
3333 done
3334
3335 if test "x$t" = x
3336 then
3337         configure_default_options="{ { NULL, NULL} }"
3338 else
3339         configure_default_options="{ ${t} }"
3340 fi
3341
3342 if test "$target_cpu_default2" != ""
3343 then
3344         if test "$target_cpu_default" != ""
3345         then
3346                 target_cpu_default="(${target_cpu_default}|${target_cpu_default2})"
3347         else
3348                 target_cpu_default=$target_cpu_default2
3349         fi
3350 fi