gcc/config.gcc

   1 # GCC target-specific configuration file.
   2 # Copyright 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
   3 # Free Software Foundation, Inc.
   4
   5 #This file is part of GCC.
   6
   7 #GCC is free software; you can redistribute it and/or modify it under
   8 #the terms of the GNU General Public License as published by the Free
   9 #Software Foundation; either version 2, or (at your option) any later
  10 #version.
  11
  12 #GCC is distributed in the hope that it will be useful, but WITHOUT
  13 #ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  14 #FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  15 #for more details.
  16
  17 #You should have received a copy of the GNU General Public License
  18 #along with GCC; see the file COPYING.  If not, write to the Free
  19 #Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
  20 #02110-1301, USA.
  21
  22 # This is the GCC target-specific configuration file
  23 # where a configuration type is mapped to different system-specific
  24 # definitions and files.  This is invoked by the autoconf-generated
  25 # configure script.  Putting it in a separate shell file lets us skip
  26 # running autoconf when modifying target-specific information.
  27
  28 # This file switches on the shell variable ${target}, and also uses the
  29 # following shell variables:
  30 #
  31 #  with_*               Various variables as set by configure.
  32 #
  33 #  enable_threads       Either the name, yes or no depending on whether
  34 #                       threads support was requested.
  35 #
  36 #  default_use_cxa_atexit
  37 #                       "no" by default, can be set to "yes" if a target
  38 #                       wishes to use __cxa_atexit() by default if the
  39 #                       $enable___cxa_atexit variable is not set.
  40 #
  41 #  gas_flag             Either yes or no depending on whether GNU as was
  42 #                       requested.
  43 #
  44 #  gnu_ld_flag          Either yes or no depending on whether GNU ld was
  45 #                       requested.
  46
  47 # This file sets the following shell variables for use by the
  48 # autoconf-generated configure script:
  49 #
  50 #  cpu_type             The name of the cpu, if different from the first
  51 #                       chunk of the canonical target name.
  52 #
  53 #  tm_defines           List of target macros to define for all compilations.
  54 #
  55 #  tm_file              A list of target macro files, if different from
  56 #                       "$cpu_type/$cpu_type.h". Usually it's constructed
  57 #                       per target in a way like this:
  58 #                       tm_file="${tm_file} dbxelf.h elfos.h svr4.h ${cpu_type.h}/elf.h"
  59 #                       Note that the preferred order is:
  60 #                       - specific target header "${cpu_type}/${cpu_type.h}"
  61 #                       - generic headers like dbxelf.h elfos.h, etc.
  62 #                       - specializing target headers like ${cpu_type.h}/elf.h
  63 #                       This helps to keep OS specific stuff out of the CPU
  64 #                       defining header ${cpu_type}/${cpu_type.h}.
  65 #
  66 #  tm_p_file            Location of file with declarations for functions
  67 #                       in $out_file.
  68 #
  69 #  out_file             The name of the machine description C support
  70 #                       file, if different from "$cpu_type/$cpu_type.c".
  71 #
  72 #  md_file              The name of the machine-description file, if
  73 #                       different from "$cpu_type/$cpu_type.md".
  74 #
  75 #  tmake_file           A list of machine-description-specific
  76 #                       makefile-fragments, if different from
  77 #                       "$cpu_type/t-$cpu_type".
  78 #
  79 #  extra_modes          The name of the file containing a list of extra
  80 #                       machine modes, if necessary and different from
  81 #                       "$cpu_type/$cpu_type-modes.def".
  82 #
  83 #  extra_objs           List of extra objects that should be linked into
  84 #                       the compiler proper (cc1, cc1obj, cc1plus)
  85 #                       depending on target.
  86 #
  87 #  extra_gcc_objs       List of extra objects that should be linked into
  88 #                       the compiler driver (gcc) depending on target.
  89 #
  90 #  extra_headers        List of used header files from the directory
  91 #                       config/${cpu_type}.
  92 #
  93 #  extra_passes         List of extra executables compiled for this target
  94 #                       machine, used for compiling from source to object.
  95 #
  96 #  extra_parts          List of extra object files that should be compiled
  97 #                       for this target machine.
  98 #
  99 #  extra_programs       Like extra_passes, but these are used when linking.
 100 #
 101 #  extra_options        List of target-dependent .opt files.
 102 #
 103 #  c_target_objs        List of extra target-dependent objects that be
 104 #                       linked into the C compiler only.
 105 #
 106 #  cxx_target_objs      List of extra target-dependent objects that be
 107 #                       linked into the C++ compiler only.
 108 #
 109 #  target_gtfiles       List of extra source files with type information.
 110 #
 111 #  xm_defines           List of macros to define when compiling for the
 112 #                       target machine.
 113 #
 114 #  xm_file              List of files to include when compiling for the
 115 #                       target machine.
 116 #
 117 #  use_collect2         Set to yes or no, depending on whether collect2
 118 #                       will be used.
 119 #
 120 #  target_cpu_default   Set to override the default target model.
 121 #
 122 #  gdb_needs_out_file_path
 123 #                       Set to yes if gdb needs a dir command with
 124 #                       `dirname $out_file`.
 125 #
 126 #  thread_file          Set to control which thread package to use.
 127 #
 128 #  gas                  Set to yes or no depending on whether the target
 129 #                       system normally uses GNU as.
 130 #
 131 #  need_64bit_hwint     Set to yes if HOST_WIDE_INT must be 64 bits wide
 132 #                       for this target.  This is true iff this target
 133 #                       supports "long" or "wchar_t" wider than 32 bits.
 134 #
 135 #  configure_default_options
 136 #                       Set to an initializer for configure_default_options
 137 #                       in configargs.h, based on --with-cpu et cetera.
 138 #
 139 #  use_fixproto         Set to "yes" if fixproto should be run normally,
 140 #                       "no" if fixproto should never be run.
 141
 142 # The following variables are used in each case-construct to build up the
 143 # outgoing variables:
 144 #
 145 #  gnu_ld               Set to yes or no depending on whether the target
 146 #                       system normally uses GNU ld.
 147
 148 out_file=
 149 tmake_file=
 150 extra_headers=
 151 extra_passes=
 152 extra_parts=
 153 extra_programs=
 154 extra_objs=
 155 extra_gcc_objs=
 156 extra_options=
 157 c_target_objs=
 158 cxx_target_objs=
 159 tm_defines=
 160 xm_defines=
 161 # Set this to force installation and use of collect2.
 162 use_collect2=
 163 # Set this to override the default target model.
 164 target_cpu_default=
 165 # Set this if gdb needs a dir command with `dirname $out_file`
 166 gdb_needs_out_file_path=
 167 # Set this to control which thread package will be used.
 168 thread_file=
 169 # Reinitialize these from the flag values every loop pass, since some
 170 # configure entries modify them.
 171 gas="$gas_flag"
 172 gnu_ld="$gnu_ld_flag"
 173 default_use_cxa_atexit=no
 174 target_gtfiles=
 175 need_64bit_hwint=
 176
 177 # Default to not using fixproto.  Targets which need fixproto should
 178 # specifically set this to 'yes'.
 179 use_fixproto=no
 180
 181 # Don't carry these over build->host->target.  Please.
 182 xm_file=
 183 md_file=
 184
 185 # Obsolete configurations.
 186 case ${target} in
 187    c4x-*                \
 188  | tic4x-*              \
 189  )
 190     if test "x$enable_obsolete" != xyes; then
 191       echo "*** Configuration ${target} is obsolete." >&2
 192       echo "*** Specify --enable-obsolete to build it anyway." >&2
 193       echo "*** Support will be REMOVED in the next major release of GCC," >&2
 194       echo "*** unless a maintainer comes forward." >&2
 195       exit 1
 196     fi;;
 197 esac
 198
 199 # Unsupported targets list.  Do not put an entry in this list unless
 200 # it would otherwise be caught by a more permissive pattern.  The list
 201 # should be in alphabetical order.
 202 case ${target} in
 203    alpha*-*-linux*libc1*                \
 204  | i[34567]86-sequent-sysv              \
 205  | i[34567]86-sequent-sysv[123]*        \
 206  | i[34567]86-go32-*                    \
 207  | i[34567]86-*-go32*                   \
 208  | m68k-*-linux*aout*                   \
 209  | m68k-*-linux*libc1*                  \
 210  | mips64orion*-*-rtems*                \
 211  | powerpc-*-linux*libc1*               \
 212  | sparc-*-linux*aout*                  \
 213  | sparc-*-linux*libc1*                 \
 214  | sparc-hal-solaris2*                  \
 215  | thumb-*-*                            \
 216  | *-*-linux*coff*                      \
 217  | *-*-linux*oldld*                     \
 218  | *-*-rtemsaout*                       \
 219  | *-*-rtemscoff*                       \
 220  | vax-*-vms*                           \
 221  )
 222         echo "*** Configuration ${target} not supported" 1>&2
 223         exit 1
 224         ;;
 225 esac
 226
 227 # Set default cpu_type, tm_file, tm_p_file and xm_file so it can be
 228 # updated in each machine entry.  Also set default extra_headers for some
 229 # machines.
 230 tm_p_file=
 231 cpu_type=`echo ${target} | sed 's/-.*$//'`
 232 cpu_is_64bit=
 233 case ${target} in
 234 m32c*-*-*)
 235         cpu_type=m32c
 236         tmake_file=m32c/t-m32c
 237         ;;
 238 alpha*-*-*)
 239         cpu_type=alpha
 240         need_64bit_hwint=yes
 241         ;;
 242 am33_2.0-*-linux*)
 243         cpu_type=mn10300
 244         ;;
 245 strongarm*-*-*)
 246         cpu_type=arm
 247         ;;
 248 arm*-*-*)
 249         cpu_type=arm
 250         extra_headers="mmintrin.h"
 251         ;;
 252 bfin*-*)
 253         cpu_type=bfin
 254         ;;
 255 ep9312*-*-*)
 256         cpu_type=arm
 257         ;;
 258 frv*)   cpu_type=frv
 259         ;;
 260 xscale-*-*)
 261         cpu_type=arm
 262         extra_headers="mmintrin.h"
 263         ;;
 264 i[34567]86-*-*)
 265         cpu_type=i386
 266         extra_headers="mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h pmmintrin.h"
 267         ;;
 268 x86_64-*-*)
 269         cpu_type=i386
 270         extra_headers="mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h pmmintrin.h"
 271         need_64bit_hwint=yes
 272         ;;
 273 ia64-*-*)
 274         extra_headers=ia64intrin.h
 275         need_64bit_hwint=yes
 276         ;;
 277 hppa*-*-* | parisc*-*-*)
 278         cpu_type=pa
 279         ;;
 280 m32r*-*-*)
 281         cpu_type=m32r
 282         ;;
 283 m680[012]0-*-*)
 284         cpu_type=m68k
 285         extra_headers=math-68881.h
 286         ;;
 287 m68k-*-*)
 288         extra_headers=math-68881.h
 289         ;;
 290 mips*-*-*)
 291         cpu_type=mips
 292         need_64bit_hwint=yes
 293         ;;
 294 powerpc*-*-*)
 295         cpu_type=rs6000
 296         extra_headers="ppc-asm.h altivec.h spe.h"
 297         need_64bit_hwint=yes
 298         case x$with_cpu in
 299             xpowerpc64|xdefault64|x6[23]0|x970|xG5|xpower[345]|xrs64a)
 300                 cpu_is_64bit=yes
 301                 ;;
 302         esac
 303         ;;
 304 rs6000*-*-*)
 305         need_64bit_hwint=yes
 306         ;;
 307 sparc64*-*-*)
 308         cpu_type=sparc
 309         need_64bit_hwint=yes
 310         ;;
 311 sparc*-*-*)
 312         cpu_type=sparc
 313         ;;
 314 s390*-*-*)
 315         cpu_type=s390
 316         need_64bit_hwint=yes
 317         ;;
 318 # Note the 'l'; we need to be able to match e.g. "shle" or "shl".
 319 sh[123456789lbe]*-*-*)
 320         cpu_type=sh
 321         need_64bit_hwint=yes
 322         ;;
 323 tic4x-*-*)
 324         cpu_type=c4x
 325         ;;
 326 esac
 327
 328 tm_file=${cpu_type}/${cpu_type}.h
 329 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-protos.h
 330 then
 331         tm_p_file=${cpu_type}/${cpu_type}-protos.h
 332 fi
 333 extra_modes=
 334 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-modes.def
 335 then
 336         extra_modes=${cpu_type}/${cpu_type}-modes.def
 337 fi
 338 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}.opt
 339 then
 340         extra_options="${extra_options} ${cpu_type}/${cpu_type}.opt"
 341 fi
 342
 343 case ${target} in
 344 x86_64-*-*)
 345         tm_file="i386/biarch64.h ${tm_file}"
 346         ;;
 347 esac
 348
 349 # On a.out targets, we need to use collect2.
 350 case ${target} in
 351 *-*-*aout*)
 352         use_collect2=yes
 353         ;;
 354 esac
 355
 356 # Common parts for widely ported systems.
 357 case ${target} in
 358 *-*-darwin*)
 359   tm_file="${tm_file} darwin.h"
 360   tm_p_file="${tm_p_file} darwin-protos.h"
 361   tmake_file="t-darwin t-slibgcc-darwin"
 362   target_gtfiles="\$(srcdir)/config/darwin.c"
 363   extra_options="${extra_options} darwin.opt"
 364   c_target_objs="darwin-c.o"
 365   cxx_target_objs="darwin-c.o"
 366   extra_parts="crt2.o"
 367   extra_objs="darwin.o"
 368   case ${enable_threads} in
 369     "" | yes | posix) thread_file='posix' ;;
 370   esac
 371   ;;
 372 *-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*)
 373   # This is the place-holder for the generic a.out configuration
 374   # of FreeBSD.  No actual configuration resides here since
 375   # there was only ever a bare-bones ix86 configuration for
 376   # a.out and it exists solely in the machine-specific section.
 377   # This place-holder must exist to avoid dropping into
 378   # the generic ELF configuration of FreeBSD (i.e. it must be
 379   # ordered before that section).
 380   ;;
 381 *-*-freebsd*)
 382   # This is the generic ELF configuration of FreeBSD.  Later
 383   # machine-specific sections may refine and add to this
 384   # configuration.
 385   #
 386   # Due to tm_file entry ordering issues that vary between cpu
 387   # architectures, we only define fbsd_tm_file to allow the
 388   # machine-specific section to dictate the final order of all
 389   # entries of tm_file with the minor exception that components
 390   # of the tm_file set here will always be of the form:
 391   #
 392   # freebsd<version_number>.h [freebsd-<conf_option>.h ...] freebsd-spec.h freebsd.h
 393   #
 394   # The machine-specific section should not tamper with this
 395   # ordering but may order all other entries of tm_file as it
 396   # pleases around the provided core setting.
 397   gas=yes
 398   gnu_ld=yes
 399   extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
 400   case ${target} in
 401     *-*-freebsd3 | *-*-freebsd[3].*)
 402       tm_defines="${tm_defines} FBSD_MAJOR=3" ;;
 403     *-*-freebsd4 | *-*-freebsd[4].*)
 404       tm_defines="${tm_defines} FBSD_MAJOR=4" ;;
 405     *-*-freebsd5 | *-*-freebsd[5].*)
 406       tm_defines="${tm_defines} FBSD_MAJOR=5" ;;
 407     *-*-freebsd6 | *-*-freebsd[6].*)
 408       tm_defines="${tm_defines} FBSD_MAJOR=6" ;;
 409     *-*-freebsd7 | *-*-freebsd[7].*)
 410       tm_defines="${tm_defines} FBSD_MAJOR=7" ;;
 411     *-*-freebsd8 | *-*-freebsd[8].*)
 412       tm_defines="${tm_defines} FBSD_MAJOR=8" ;;
 413     *-*-freebsd9 | *-*-freebsd[9].*)
 414       tm_defines="${tm_defines} FBSD_MAJOR=9" ;;
 415     *)
 416       echo 'Please update *-*-freebsd* in gcc/config.gcc'
 417       exit 1
 418       ;;
 419   esac
 420   tmake_file="t-slibgcc-elf-ver t-freebsd"
 421   case ${enable_threads} in
 422     no)
 423       fbsd_tm_file="${fbsd_tm_file} freebsd-nthr.h"
 424       ;;
 425     "" | yes | posix)
 426       thread_file='posix'
 427       tmake_file="${tmake_file} t-freebsd-thread"
 428       # Before 5.0, FreeBSD can't bind shared libraries to -lc
 429       # when "optionally" threaded via weak pthread_* checks.
 430       case ${target} in
 431         *-*-freebsd[34] | *-*-freebsd[34].*)
 432           tmake_file="${tmake_file} t-slibgcc-nolc-override"
 433           ;;
 434       esac
 435       ;;
 436     *)
 437       echo 'Unknown thread configuration for FreeBSD'
 438       exit 1
 439       ;;
 440   esac
 441   fbsd_tm_file="${fbsd_tm_file} freebsd-spec.h freebsd.h"
 442   ;;
 443 *-*-linux*libc1* | *-*-linux*aout*)
 444   # Avoid the generic linux case.
 445   ;;
 446 *-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu)
 447   # Must come before *-*-gnu* (because of *-*-linux-gnu* systems).
 448   extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
 449   gas=yes
 450   gnu_ld=yes
 451   case ${enable_threads} in
 452     "" | yes | posix) thread_file='posix' ;;
 453   esac
 454   tmake_file="t-slibgcc-elf-ver t-linux"
 455   ;;
 456 *-*-gnu*)
 457   # On the Hurd, the setup is just about the same on
 458   # each different CPU.  The specific machines that we
 459   # support are matched above and just set $cpu_type.
 460   tm_file="${cpu_type}/gnu.h"
 461   extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
 462   # GNU tools are the only tools.
 463   gas=yes
 464   gnu_ld=yes
 465   # These details are the same as for Linux.
 466   # But here we need a little extra magic.
 467   tmake_file="t-slibgcc-elf-ver t-linux t-gnu"
 468   case ${target} in
 469     alpha*)
 470       tm_file="${cpu_type}/${cpu_type}.h alpha/elf.h alpha/linux.h alpha/linux-elf.h gnu.h ${tm_file}"
 471       ;;
 472     i[34567]86-*-*)
 473       tm_file="${cpu_type}/${cpu_type}.h i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h gnu.h ${tm_file}"
 474       ;;
 475   esac
 476   ;;
 477 *-*-netbsd*)
 478   tmake_file="t-slibgcc-elf-ver t-libc-ok t-netbsd t-libgcc-pic"
 479   gas=yes
 480   gnu_ld=yes
 481
 482   # NetBSD 2.0 and later get POSIX threads enabled by default.
 483   # Allow them to be explicitly enabled on any other version.
 484   case ${enable_threads} in
 485     "")
 486       case ${target} in
 487         *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
 488           thread_file='posix'
 489           tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
 490           ;;
 491       esac
 492       ;;
 493     yes | posix)
 494       thread_file='posix'
 495       tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
 496       ;;
 497   esac
 498
 499   # NetBSD 1.7 and later are set up to use GCC's crtstuff for
 500   # ELF configurations.  We will clear extra_parts in the
 501   # a.out configurations.
 502   case ${target} in
 503     *-*-netbsd*1.[7-9]* | *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
 504       extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
 505       ;;
 506   esac
 507
 508   # NetBSD 2.0 and later provide __cxa_atexit(), which we use by
 509   # default (unless overridden by --disable-__cxa_atexit).
 510   case ${target} in
 511     *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
 512       default_use_cxa_atexit=yes
 513       ;;
 514   esac
 515   ;;
 516 *-*-openbsd*)
 517   tmake_file="t-libc-ok t-openbsd t-libgcc-pic"
 518   case ${enable_threads} in
 519     yes)
 520       thread_file='posix'
 521       tmake_file="${tmake_file} t-openbsd-thread"
 522       ;;
 523   esac
 524   case ${target} in
 525     *-*-openbsd2.*|*-*-openbsd3.[012])
 526       tm_defines="${tm_defines} HAS_LIBC_R=1" ;;
 527   esac
 528   ;;
 529 *-*-rtems*)
 530   case ${enable_threads} in
 531     yes) thread_file='rtems' ;;
 532   esac
 533   ;;
 534 *-*-vxworks*)
 535   tmake_file=t-vxworks
 536   tm_file="${tm_file} elfos.h svr4.h vxworks.h"
 537   case ${enable_threads} in
 538     no) ;;
 539     "" | yes | vxworks) thread_file='vxworks' ;;
 540     *) echo 'Unknown thread configuration for VxWorks'; exit 1 ;;
 541   esac
 542   use_collect2=yes
 543   xm_defines=POSIX
 544   ;;
 545 esac
 546
 547 case ${target} in
 548 # Support site-specific machine types.
 549 *local*)
 550         rest=`echo ${target} | sed -e "s/$cpu_type-//"`
 551         tm_file=${cpu_type}/$rest.h
 552         if test -f $srcdir/config/${cpu_type}/xm-$rest.h
 553         then xm_file=${cpu_type}/xm-$rest.h
 554         fi
 555         if test -f $srcdir/config/${cpu_type}/t-$rest
 556         then tmake_file=${cpu_type}/t-$rest
 557         fi
 558         ;;
 559 alpha*-*-unicosmk*)
 560         use_collect2=yes
 561         tm_file="${tm_file} alpha/unicosmk.h"
 562
 563         # Don't include t-ieee for now because we don't support that yet
 564         # tmake_file="alpha/t-ieee"
 565         tmake_file="alpha/t-unicosmk"
 566         use_fixproto=yes
 567         ;;
 568 alpha*-*-linux*)
 569         tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h"
 570         target_cpu_default="MASK_GAS"
 571         tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
 572         ;;
 573 alpha*-*-gnu*)
 574         target_cpu_default="MASK_GAS"
 575         tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
 576         ;;
 577 alpha*-*-freebsd*)
 578         tm_file="${tm_file} ${fbsd_tm_file} alpha/elf.h alpha/freebsd.h"
 579         target_cpu_default="MASK_GAS"
 580         tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
 581         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
 582         ;;
 583 alpha*-*-netbsd*)
 584         tm_file="${tm_file} netbsd.h alpha/elf.h netbsd-elf.h alpha/netbsd.h"
 585         target_cpu_default="MASK_GAS"
 586         tmake_file="${tmake_file} alpha/t-alpha alpha/t-ieee"
 587         ;;
 588 alpha*-*-openbsd*)
 589         tm_defines="OBSD_NO_DYNAMIC_LIBRARIES OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_FUNCTION_SIZE OBSD_HAS_DECLARE_OBJECT"
 590         tm_file="alpha/alpha.h openbsd.h alpha/openbsd.h"
 591         # default x-alpha is only appropriate for dec-osf.
 592         target_cpu_default="MASK_GAS"
 593         tmake_file="alpha/t-alpha alpha/t-ieee"
 594         ;;
 595 alpha*-dec-osf[45]*)
 596         if test x$stabs = xyes
 597         then
 598                 tm_file="${tm_file} dbx.h"
 599         fi
 600         if test x$gas != xyes
 601         then
 602                 extra_passes="mips-tfile mips-tdump"
 603         fi
 604         use_collect2=yes
 605         tmake_file="alpha/t-alpha alpha/t-ieee alpha/t-crtfm alpha/t-osf4"
 606         tm_file="${tm_file} alpha/osf.h"
 607         extra_headers=va_list.h
 608         case ${target} in
 609           *-*-osf4*)
 610             # Define TARGET_SUPPORT_ARCH except on 4.0a.
 611             case ${target} in
 612                 *-*-osf4.0a) ;;
 613                 *) tm_defines="TARGET_SUPPORT_ARCH=1"
 614             esac
 615             ;;
 616           *-*-osf5*)
 617             tm_file="${tm_file} alpha/osf5.h"
 618             tm_defines="TARGET_SUPPORT_ARCH=1"
 619             ;;
 620         esac
 621         case ${enable_threads} in
 622           "" | yes | posix)
 623             thread_file='posix'
 624             tmake_file="${tmake_file} alpha/t-osf-pthread"
 625             ;;
 626         esac
 627         ;;
 628 alpha64-dec-*vms*)
 629         tm_file="${tm_file} alpha/vms.h alpha/vms64.h"
 630         xm_file="alpha/xm-vms.h"
 631         tmake_file="alpha/t-alpha alpha/t-vms alpha/t-vms64 alpha/t-ieee"
 632         prefix=/gnu
 633         local_prefix=/gnu
 634         ;;
 635 alpha*-dec-*vms*)
 636         tm_file="${tm_file} alpha/vms.h"
 637         xm_file=alpha/xm-vms.h
 638         tmake_file="alpha/t-alpha alpha/t-vms alpha/t-ieee"
 639         prefix=/gnu
 640         local_prefix=/gnu
 641         ;;
 642 arc-*-elf*)
 643         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
 644         extra_parts="crtinit.o crtfini.o"
 645         use_fixproto=yes
 646         ;;
 647 arm-*-coff* | armel-*-coff*)
 648         tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h"
 649         tmake_file="arm/t-arm arm/t-arm-coff"
 650         ;;
 651 arm-semi-aof | armel-semi-aof)
 652         tm_file="arm/semiaof.h arm/aof.h arm/arm.h"
 653         tmake_file="arm/t-arm arm/t-semi"
 654         ;;
 655 arm-wrs-vxworks)
 656         tm_file="dbxelf.h elfos.h svr4.h vxworks.h arm/elf.h arm/aout.h arm/arm.h arm/vxworks.h"
 657         tmake_file="${tmake_file} arm/t-arm arm/t-vxworks"
 658         ;;
 659 arm*-*-freebsd*|strongarm*-*-freebsd*)
 660         tm_file="dbxelf.h elfos.h ${fbsd_tm_file} arm/elf.h arm/aout.h arm/freebsd.h arm/arm.h"
 661         tmake_file="${tmake_file} arm/t-arm arm/t-strongarm-elf"
 662         ;;
 663 arm*-*-netbsdelf*)
 664         tm_file="dbxelf.h elfos.h netbsd.h netbsd-elf.h arm/elf.h arm/aout.h arm/arm.h arm/netbsd-elf.h"
 665         tmake_file="${tmake_file} arm/t-arm arm/t-netbsd"
 666         ;;
 667 arm*-*-netbsd*)
 668         tm_file="arm/aout.h arm/arm.h netbsd.h netbsd-aout.h arm/netbsd.h"
 669         tmake_file="t-netbsd arm/t-arm arm/t-netbsd"
 670         extra_parts=""
 671         use_collect2=yes
 672         ;;
 673 arm*-*-linux*)                  # ARM GNU/Linux with ELF
 674         tm_file="dbxelf.h elfos.h linux.h arm/elf.h  arm/linux-gas.h arm/linux-elf.h arm/aout.h arm/arm.h"
 675         tmake_file="${tmake_file} arm/t-arm arm/t-linux"
 676         extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
 677         gnu_ld=yes
 678         ;;
 679 arm*-*-uclinux*)                # ARM ucLinux
 680         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/linux-gas.h arm/linux-elf.h arm/uclinux-elf.h"
 681         tmake_file="arm/t-arm arm/t-arm-elf"
 682         ;;
 683 arm*-*-ecos-elf)
 684         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/ecos-elf.h"
 685         tmake_file="arm/t-arm arm/t-arm-elf"
 686         ;;
 687 arm*-*-eabi* | arm*-*-symbianelf* )
 688         # The BPABI long long divmod functions return a 128-bit value in
 689         # registers r0-r3.  Correctly modeling that requires the use of
 690         # TImode.
 691         need_64bit_hwint=yes
 692         default_use_cxa_atexit=yes
 693         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/bpabi.h"
 694         tmake_file="arm/t-arm arm/t-arm-elf"
 695         case ${target} in
 696         arm*-*-eabi*)
 697           tmake_file="${tmake_file} arm/t-bpabi"
 698           ;;
 699         arm*-*-symbianelf*)
 700           tm_file="${tm_file} arm/symbian.h"
 701           # We do not include t-bpabi for Symbian OS because the system
 702           # provides its own implementation of the BPABI functions.
 703           tmake_file="${tmake_file} t-slibgcc-elf-ver arm/t-symbian"
 704           ;;
 705         esac
 706         tm_file="${tm_file} arm/aout.h arm/arm.h"
 707         ;;
 708 arm*-*-rtems*)
 709         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/rtems-elf.h rtems.h"
 710         tmake_file="arm/t-arm arm/t-arm-elf t-rtems arm/t-rtems"
 711         ;;
 712 arm*-*-elf | ep9312-*-elf)
 713         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
 714         tmake_file="arm/t-arm arm/t-arm-elf"
 715         ;;
 716 arm*-wince-pe*)
 717         tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h arm/wince-pe.h"
 718         tmake_file="arm/t-arm arm/t-wince-pe"
 719         extra_options="${extra_options} arm/pe.opt"
 720         extra_objs="pe.o"
 721         ;;
 722 arm-*-pe*)
 723         tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h"
 724         tmake_file="arm/t-arm arm/t-pe"
 725         extra_options="${extra_options} arm/pe.opt"
 726         extra_objs="pe.o"
 727         ;;
 728 arm*-*-kaos*)
 729         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h kaos.h arm/kaos-arm.h"
 730         tmake_file="arm/t-arm arm/t-arm-elf"
 731         ;;
 732 avr-*-rtems*)
 733         tm_file="avr/avr.h dbxelf.h avr/rtems.h rtems.h"
 734         tmake_file="avr/t-avr t-rtems avr/t-rtems"
 735         ;;
 736 avr-*-*)
 737         tm_file="avr/avr.h dbxelf.h"
 738         use_fixproto=yes
 739         ;;
 740 bfin*-elf*)
 741         tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h"
 742         tmake_file=bfin/t-bfin-elf
 743         use_collect2=no
 744         ;;
 745 bfin*-uclinux*)
 746         tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h bfin/uclinux.h"
 747         tmake_file=bfin/t-bfin-elf
 748         use_collect2=no
 749         ;;
 750 bfin*-*)
 751         tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h"
 752         tmake_file=bfin/t-bfin
 753         use_collect2=no
 754         ;;
 755 c4x-*-rtems* | tic4x-*-rtems*)
 756         tmake_file="c4x/t-c4x t-rtems c4x/t-rtems"
 757         tm_file="c4x/c4x.h c4x/rtems.h rtems.h"
 758         c_target_objs="c4x-c.o"
 759         cxx_target_objs="c4x-c.o"
 760         ;;
 761 c4x-* | tic4x-*)
 762         tmake_file=c4x/t-c4x
 763         c_target_objs="c4x-c.o"
 764         cxx_target_objs="c4x-c.o"
 765         ;;
 766 cris-*-aout)
 767         tm_file="dbxelf.h ${tm_file} cris/aout.h"
 768         gas=yes
 769         tmake_file="cris/t-cris cris/t-aout"
 770         extra_options="${extra_options} cris/aout.opt"
 771         ;;
 772 cris-*-elf | cris-*-none)
 773         tm_file="dbxelf.h elfos.h ${tm_file}"
 774         tmake_file="cris/t-cris cris/t-elfmulti"
 775         gas=yes
 776         extra_options="${extra_options} cris/elf.opt"
 777         ;;
 778 cris-*-linux*)
 779         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} linux.h cris/linux.h"
 780         # We need to avoid using t-linux, so override default tmake_file
 781         tmake_file="cris/t-cris t-slibgcc-elf-ver cris/t-linux"
 782         extra_options="${extra_options} cris/linux.opt"
 783         ;;
 784 crx-*-elf)
 785         tm_file="elfos.h ${tm_file}"
 786         extra_parts="crtbegin.o crtend.o"
 787         use_collect2=no
 788         ;;
 789 fr30-*-elf)
 790         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
 791         tmake_file=fr30/t-fr30
 792         extra_parts="crti.o crtn.o crtbegin.o crtend.o"
 793         use_fixproto=yes
 794         ;;
 795 frv-*-elf)
 796         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} frv/frv-abi.h"
 797         tmake_file=frv/t-frv
 798         use_fixproto=yes
 799         ;;
 800 frv-*-*linux*)
 801         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} \
 802                  linux.h frv/linux.h frv/frv-abi.h"
 803         tmake_file="${tmake_file} frv/t-frv frv/t-linux"
 804         ;;
 805 h8300-*-rtemscoff*)
 806         tmake_file="h8300/t-h8300 t-rtems h8300/t-rtems"
 807         tm_file="h8300/h8300.h dbxcoff.h h8300/coff.h h8300/rtems.h rtems.h"
 808         ;;
 809 h8300-*-rtems*)
 810         tmake_file="h8300/t-h8300 h8300/t-elf t-rtems h8300/t-rtems"
 811         tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h h8300/rtems.h rtems.h"
 812         ;;
 813 h8300-*-elf*)
 814         tmake_file="h8300/t-h8300 h8300/t-elf"
 815         tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h"
 816         use_fixproto=yes
 817         ;;
 818 h8300-*-*)
 819         tm_file="h8300/h8300.h dbxcoff.h h8300/coff.h"
 820         use_fixproto=yes
 821         ;;
 822 hppa*64*-*-linux* | parisc*64*-*-linux*)
 823         target_cpu_default="MASK_PA_11|MASK_PA_20"
 824         tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h svr4.h linux.h \
 825                  pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h pa/pa64-linux.h"
 826         tmake_file="${tmake_file} pa/t-linux64"
 827         gas=yes gnu_ld=yes
 828         need_64bit_hwint=yes
 829         ;;
 830 hppa*-*-linux* | parisc*-*-linux*)
 831         target_cpu_default="MASK_PA_11|MASK_NO_SPACE_REGS"
 832         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h pa/pa-linux.h \
 833                  pa/pa32-regs.h pa/pa32-linux.h"
 834         tmake_file="${tmake_file} pa/t-linux"
 835         # if not configured with --enable-sjlj-exceptions, bump the
 836         # libgcc version number
 837         if test x$sjlj != x1; then
 838             tmake_file="$tmake_file pa/t-slibgcc-elf-ver"
 839         fi
 840         ;;
 841 # port not yet contributed.
 842 #hppa*-*-openbsd*)
 843 #       target_cpu_default="MASK_PA_11"
 844 #       ;;
 845 hppa1.1-*-pro*)
 846         target_cpu_default="MASK_PORTABLE_RUNTIME|MASK_NO_SPACE_REGS|MASK_SOFT_FLOAT"
 847         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h elfos.h pa/elf.h \
 848                  pa/pa-pro-end.h libgloss.h"
 849         tmake_file="pa/t-pro"
 850         ;;
 851 hppa1.1-*-osf*)
 852         target_cpu_default="MASK_PA_11"
 853         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h pa/pa-osf.h"
 854         tmake_file="pa/t-pa"
 855         use_collect2=yes
 856         ;;
 857 hppa1.1-*-bsd*)
 858         target_cpu_default="MASK_PA_11"
 859         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h"
 860         tmake_file="pa/t-pa"
 861         use_collect2=yes
 862         ;;
 863 hppa[12]*-*-hpux10*)
 864         case ${target} in
 865         hppa1.1-*-* | hppa2*-*-*)
 866                 target_cpu_default="MASK_PA_11"
 867                 ;;
 868         esac
 869         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
 870                  pa/pa-hpux.h pa/pa-hpux10.h"
 871         extra_options="${extra_options} pa/pa-hpux.opt"
 872         case ${target} in
 873         *-*-hpux10.[1-9]*)
 874                 tm_file="${tm_file} pa/pa-hpux1010.h"
 875                 extra_options="${extra_options} pa/pa-hpux1010.opt"
 876                 ;;
 877         esac
 878         tmake_file="pa/t-pa pa/t-pa-hpux pa/t-hpux-shlib"
 879         case ${enable_threads} in
 880           "")
 881             if test x$have_pthread_h = xyes ; then
 882               tmake_file="${tmake_file} pa/t-dce-thr"
 883             fi
 884             ;;
 885           yes | dce)
 886             tmake_file="${tmake_file} pa/t-dce-thr"
 887             ;;
 888         esac
 889         use_collect2=yes
 890         use_fixproto=yes
 891         ;;
 892 hppa*64*-*-hpux11*)
 893         target_cpu_default="MASK_PA_11|MASK_PA_20"
 894         if test x$gnu_ld = xyes
 895         then
 896                 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
 897         fi
 898         if test x$gas = xyes
 899         then
 900                 tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h \
 901                          pa/pa64-regs.h pa/pa-hpux.h pa/pa-hpux1010.h \
 902                          pa/pa-hpux11.h"
 903         else
 904                 tm_file="pa/pa64-start.h ${tm_file} dbxelf.h pa/elf.h \
 905                          pa/pa64-regs.h pa/pa-hpux.h pa/pa-hpux1010.h \
 906                          pa/pa-hpux11.h"
 907         fi
 908         case ${target} in
 909         *-*-hpux11.[1-9]*)
 910                 tm_file="${tm_file} pa/pa-hpux1111.h pa/pa-64.h pa/pa64-hpux.h"
 911                 extra_options="${extra_options} pa/pa-hpux1111.opt"
 912                 ;;
 913         *)
 914                 tm_file="${tm_file} pa/pa-64.h pa/pa64-hpux.h"
 915                 ;;
 916         esac
 917         extra_options="${extra_options} pa/pa-hpux.opt \
 918                        pa/pa-hpux1010.opt pa/pa64-hpux.opt"
 919         need_64bit_hwint=yes
 920         tmake_file="pa/t-pa64 pa/t-pa-hpux pa/t-hpux-shlib"
 921         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
 922         case x${enable_threads} in
 923         xyes | xposix )
 924                 thread_file=posix
 925                 ;;
 926         esac
 927         ;;
 928 hppa[12]*-*-hpux11*)
 929         case ${target} in
 930         hppa1.1-*-* | hppa2*-*-*)
 931                 target_cpu_default="MASK_PA_11"
 932                 ;;
 933         esac
 934         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
 935                  pa/pa-hpux.h pa/pa-hpux1010.h pa/pa-hpux11.h"
 936         extra_options="${extra_options} pa/pa-hpux.opt pa/pa-hpux1010.opt"
 937         case ${target} in
 938         *-*-hpux11.[1-9]*)
 939                 tm_file="${tm_file} pa/pa-hpux1111.h"
 940                 extra_options="${extra_options} pa/pa-hpux1111.opt"
 941                 ;;
 942         esac
 943         tmake_file="pa/t-pa pa/t-pa-hpux pa/t-hpux-shlib"
 944         case x${enable_threads} in
 945         xyes | xposix )
 946                 thread_file=posix
 947                 ;;
 948         esac
 949         use_collect2=yes
 950         ;;
 951 i[34567]86-*-darwin*)
 952         tm_file="${tm_file} i386/darwin.h"
 953         ;;
 954 i[34567]86-*-elf*)
 955         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h"
 956         tmake_file="i386/t-i386elf t-svr4"
 957         use_fixproto=yes
 958         ;;
 959 i[34567]86-sequent-ptx4* | i[34567]86-sequent-sysv4*)
 960         if test x$gas = xyes
 961         then
 962                 tm_file="${tm_file} usegas.h"
 963         fi
 964         xm_defines="SMALL_ARG_MAX"
 965         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ptx4.h i386/ptx4-i.h"
 966         tmake_file=t-svr4
 967         extra_parts="crtbegin.o crtend.o"
 968         use_fixproto=yes
 969         ;;
 970 i[34567]86-*-aout*)
 971         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h i386/i386-aout.h"
 972         use_fixproto=yes
 973         ;;
 974 i[34567]86-*-beoself* | i[34567]86-*-beos*)
 975         tmake_file='i386/t-beos i386/t-crtpic'
 976         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/beos-elf.h"
 977         extra_parts='crtbegin.o crtend.o'
 978         ;;
 979 i[34567]86-*-freebsd*)
 980         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/freebsd.h"
 981         ;;
 982 x86_64-*-freebsd*)
 983         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/x86-64.h i386/freebsd.h i386/freebsd64.h"
 984         ;;
 985 i[34567]86-*-netbsdelf*)
 986         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/netbsd-elf.h"
 987         ;;
 988 i[34567]86-*-netbsd*)
 989         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h netbsd.h netbsd-aout.h i386/netbsd.h"
 990         tmake_file=t-netbsd
 991         extra_parts=""
 992         use_collect2=yes
 993         ;;
 994 x86_64-*-netbsd*)
 995         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/x86-64.h i386/netbsd64.h"
 996         ;;
 997 i[34567]86-*-openbsd2.*|i[34567]86-*openbsd3.[0123])
 998         tm_file="i386/i386.h i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h openbsd-oldgas.h openbsd.h i386/openbsd.h"
 999         # needed to unconfuse gdb
1000         tmake_file="t-libc-ok t-openbsd i386/t-openbsd"
1001         # we need collect2 until our bug is fixed...
1002         use_collect2=yes
1003         ;;
1004 i[34567]86-*-openbsd*)
1005         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h"
1006         tm_file="${tm_file} openbsd.h i386/openbsdelf.h"
1007         gas=yes
1008         gnu_ld=yes
1009         ;;
1010 i[34567]86-*-coff*)
1011         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/i386-coff.h"
1012         use_fixproto=yes
1013         ;;
1014 i[34567]86-*-linux* | i[34567]86-*-kfreebsd*-gnu | i[34567]86-*-knetbsd*-gnu)
1015                         # Intel 80386's running GNU/*
1016                         # with ELF format using glibc 2
1017         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h"
1018         case ${target} in
1019         i[34567]86-*-knetbsd*-gnu) tm_file="${tm_file} knetbsd-gnu.h i386/knetbsd-gnu.h" ;;
1020         i[34567]86-*-kfreebsd*-gnu) tm_file="${tm_file} kfreebsd-gnu.h i386/kfreebsd-gnu.h" ;;
1021         esac
1022         tmake_file="${tmake_file} i386/t-crtstuff i386/t-crtfm"
1023         ;;
1024 x86_64-*-linux* | x86_64-*-kfreebsd*-gnu | x86_64-*-knetbsd*-gnu)
1025         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h \
1026                  i386/x86-64.h i386/linux64.h"
1027         case ${target} in
1028         x86_64-*-kfreebsd*-gnu) tm_file="${tm_file} kfreebsd-gnu.h" ;;
1029         x86_64-*-knetbsd*-gnu) tm_file="${tm_file} knetbsd-gnu.h" ;;
1030         esac
1031         tmake_file="${tmake_file} i386/t-linux64 i386/t-crtfm"
1032         ;;
1033 i[34567]86-*-gnu*)
1034         ;;
1035 i[34567]86-pc-msdosdjgpp*)
1036         xm_file=i386/xm-djgpp.h
1037         tm_file="dbxcoff.h ${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/djgpp.h"
1038         tmake_file=i386/t-djgpp
1039         extra_options="${extra_options} i386/djgpp.opt"
1040         gnu_ld=yes
1041         gas=yes
1042         ;;
1043 i[34567]86-*-lynxos*)
1044         xm_defines=POSIX
1045         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/lynx.h lynx.h"
1046         tmake_file="i386/t-crtstuff t-lynx"
1047         extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
1048         extra_options="${extra_options} lynx.opt"
1049         thread_file=lynx
1050         gnu_ld=yes
1051         gas=yes
1052         ;;
1053 i[3456x]86-*-netware*)
1054         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h tm-dwarf2.h i386/netware.h"
1055         tmake_file=i386/t-netware
1056         extra_objs=netware.o
1057         case /${with_ld} in
1058         */nwld)
1059                 extra_objs="$extra_objs nwld.o"
1060                 tm_file="${tm_file} i386/nwld.h"
1061                 tmake_file="${tmake_file} i386/t-nwld"
1062                 extra_parts="crt0.o libgcc.def libc.def libcpre.def posixpre.def"
1063                 ;;
1064         esac
1065         case x${enable_threads} in
1066         x | xyes | xposix) thread_file='posix';;
1067         xnks) thread_file='nks';;
1068         xno) ;;
1069         *) echo 'Unknown thread configuration for NetWare' >&2; exit 1;;
1070         esac
1071         ;;
1072 i[34567]86-*-nto-qnx*)
1073         tm_file="${tm_file} i386/att.h dbxelf.h tm-dwarf2.h elfos.h svr4.h i386/unix.h i386/nto.h"
1074         tmake_file=i386/t-nto
1075         gnu_ld=yes
1076         gas=yes
1077         ;;
1078 i[34567]86-*-rtems*)
1079         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/rtemself.h rtems.h"
1080         extra_parts="crtbegin.o crtend.o crti.o crtn.o"
1081         tmake_file="i386/t-rtems-i386 i386/t-crtstuff t-rtems"
1082         ;;
1083 i[34567]86-*-sco3.2v5*) # 80386 running SCO Open Server 5
1084         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/sco5.h"
1085         if test x$gas = xyes
1086         then
1087                 tm_file="usegas.h ${tm_file}"
1088         fi
1089         tmake_file=i386/t-sco5
1090         extra_parts="crtbegin.o crtend.o"
1091         extra_options="${extra_options} i386/sco5.opt"
1092         use_fixproto=yes
1093         ;;
1094 i[34567]86-*-solaris2*)
1095         xm_defines="SMALL_ARG_MAX"
1096         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h sol2.h"
1097         case ${target} in
1098         *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
1099                 tm_file="${tm_file} sol26.h"
1100         esac
1101         tm_file="${tm_file} i386/sol2.h"
1102         tmake_file="t-sol2 i386/t-sol2 t-svr4"
1103         c_target_objs="sol2-c.o"
1104         cxx_target_objs="sol2-c.o"
1105         extra_objs="sol2.o"
1106         tm_p_file="${tm_p_file} sol2-protos.h"
1107         if test x$gnu_ld = xyes; then
1108                 tmake_file="$tmake_file t-slibgcc-elf-ver"
1109                 tm_defines="${tm_defines} TARGET_GNU_LD=1"
1110         else
1111                 tmake_file="$tmake_file t-slibgcc-sld"
1112         fi
1113         case ${target} in
1114         *-*-solaris2.[789] | *-*-solaris2.1[0-9]*)
1115                 tm_file="$tm_file tm-dwarf2.h"
1116                 ;;
1117         esac
1118         case ${target} in
1119         *-*-solaris2.1[0-9]*)
1120                 tm_file="${tm_file} i386/x86-64.h i386/sol2-10.h"
1121                 tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1122                 tmake_file="$tmake_file i386/t-sol2-10"
1123                 need_64bit_hwint=yes
1124                 # Solaris 2.10 provides crt1.o, crti.o, crtn.o, and gcrt1.o as
1125                 # part of the base system.
1126                 extra_parts="gmon.o crtbegin.o crtend.o"
1127                 ;;
1128         *)
1129                 extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
1130                 ;;
1131         esac
1132         case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
1133           "":yes:* | yes:yes:* )
1134                 case ${target} in
1135                   *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
1136                         thread_file=posix95
1137                         ;;
1138                   *)
1139                         thread_file=posix
1140                         ;;
1141                 esac
1142                 ;;
1143           "":*:yes | yes:*:yes )
1144                 thread_file=solaris
1145                 ;;
1146         esac
1147         ;;
1148 i[34567]86-*-sysv5*)           # Intel x86 on System V Release 5
1149        tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv5.h"
1150        if test x$stabs = xyes
1151        then
1152                tm_file="${tm_file} dbx.h"
1153        fi
1154        tmake_file="i386/t-crtpic t-svr4"
1155        extra_parts="crtbegin.o crtend.o"
1156        if test x$enable_threads = xyes; then
1157                thread_file='posix'
1158        fi
1159         use_fixproto=yes
1160        ;;
1161 i[34567]86-*-sysv4*)            # Intel 80386's running system V.4
1162         xm_defines="SMALL_ARG_MAX"
1163         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv4-cpp.h"
1164         if test x$stabs = xyes
1165         then
1166                 tm_file="${tm_file} dbx.h"
1167         fi
1168         tmake_file="i386/t-crtpic t-svr4"
1169         extra_parts="crtbegin.o crtend.o"
1170         use_fixproto=yes
1171         ;;
1172 i[4567]86-wrs-vxworks)
1173         tm_file="${tm_file} i386/sysv4.h i386/unix.h i386/vxworks.h"
1174         tmake_file="${tmake_file} i386/t-vxworks"
1175         ;;
1176 i[34567]86-*-pe | i[34567]86-*-cygwin*)
1177         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/cygwin.h"
1178         xm_file=i386/xm-cygwin.h
1179         tmake_file="i386/t-cygwin i386/t-cygming"
1180         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1181         extra_options="${extra_options} i386/cygming.opt"
1182         extra_objs=winnt.o
1183         c_target_objs=cygwin2.o
1184         cxx_target_objs=cygwin2.o
1185         extra_gcc_objs=cygwin1.o
1186         if test x$enable_threads = xyes; then
1187                 thread_file='posix'
1188         fi
1189         ;;
1190 i[34567]86-*-mingw32*)
1191         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/mingw32.h"
1192         xm_file=i386/xm-mingw32.h
1193         tmake_file="i386/t-cygming i386/t-mingw32"
1194         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1195         extra_options="${extra_options} i386/cygming.opt"
1196         extra_objs=winnt.o
1197         case ${enable_threads} in
1198           "" | yes | win32) thread_file='win32' ;;
1199         esac
1200         case ${target} in
1201                 *mingw32crt*)
1202                         tm_file="${tm_file} i386/crtdll.h"
1203                         ;;
1204                 *mingw32msv* | *mingw32*)
1205                         ;;
1206         esac
1207         ;;
1208 i[34567]86-*-uwin*)
1209         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygwin.h i386/uwin.h"
1210         tmake_file="i386/t-cygwin i386/t-uwin"
1211         extra_objs=winnt.o
1212         extra_options="${extra_options} i386/cygming.opt"
1213         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1214         if test x$enable_threads = xyes; then
1215                 thread_file='win32'
1216         fi
1217         use_fixproto=yes
1218         ;;
1219 i[34567]86-*-interix3*)
1220         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/i386-interix.h i386/i386-interix3.h interix.h interix3.h"
1221         tmake_file="i386/t-interix"
1222         extra_objs=winnt.o
1223         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1224         if test x$enable_threads = xyes ; then
1225                 thread_file='posix'
1226         fi
1227         if test x$stabs = xyes ; then
1228                 tm_file="${tm_file} dbxcoff.h"
1229         fi
1230         ;;
1231 i[34567]86-*-kaos*)
1232         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h kaos.h i386/kaos-i386.h"
1233         tmake_file="i386/t-i386elf t-svr4"
1234         ;;
1235 ia64*-*-elf*)
1236         tm_file="${tm_file} dbxelf.h elfos.h ia64/sysv4.h ia64/elf.h"
1237         tmake_file="ia64/t-ia64"
1238         target_cpu_default="0"
1239         if test x$gas = xyes
1240         then
1241                 target_cpu_default="${target_cpu_default}|MASK_GNU_AS"
1242         fi
1243         if test x$gnu_ld = xyes
1244         then
1245                 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
1246         fi
1247         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1248         use_fixproto=yes
1249         ;;
1250 ia64*-*-freebsd*)
1251         tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} ia64/sysv4.h ia64/freebsd.h"
1252         target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1253         tmake_file="${tmake_file} ia64/t-ia64"
1254         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1255         ;;
1256 ia64*-*-linux*)
1257         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h ia64/sysv4.h ia64/linux.h"
1258         tmake_file="${tmake_file} ia64/t-ia64 t-libunwind ia64/t-glibc"
1259         if test x$with_system_libunwind != xyes ; then
1260                 tmake_file="${tmake_file} t-libunwind-elf ia64/t-glibc-libunwind"
1261         fi
1262         target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1263         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1264         ;;
1265 ia64*-*-hpux*)
1266         tm_file="${tm_file} dbxelf.h elfos.h svr4.h ia64/sysv4.h ia64/hpux.h"
1267         tmake_file="ia64/t-ia64 ia64/t-hpux"
1268         target_cpu_default="MASK_GNU_AS"
1269         case x$enable_threads in
1270         xyes | xposix )
1271                 thread_file=posix
1272                 ;;
1273         esac
1274         use_collect2=no
1275         c_target_objs="ia64-c.o"
1276         cxx_target_objs="ia64-c.o"
1277         extra_options="${extra_options} ia64/ilp32.opt"
1278         # If we decide to run fixproto we should define FIXPROTO_DEFINES
1279         # in ia64/t-hpux, and also fix the definition of putenv in
1280         # sys-protos.h (const char not char).
1281         ;;
1282 iq2000*-*-elf*)
1283         tm_file="svr4.h elfos.h iq2000/iq2000.h"
1284         tmake_file=iq2000/t-iq2000
1285         out_file=iq2000/iq2000.c
1286         md_file=iq2000/iq2000.md
1287         use_fixproto=yes
1288         ;;
1289 m32r-*-elf*)
1290         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
1291         extra_parts="crtinit.o crtfini.o"
1292         use_fixproto=yes
1293         ;;
1294 m32rle-*-elf*)
1295         tm_file="dbxelf.h elfos.h svr4.h m32r/little.h ${tm_file}"
1296         extra_parts="crtinit.o crtfini.o m32rx/crtinit.o m32rx/crtfini.o"
1297         use_fixproto=yes
1298         ;;
1299 m32r-*-linux*)
1300         tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} m32r/linux.h"
1301         # We override the tmake_file for linux -- why?
1302         tmake_file="t-slibgcc-elf-ver m32r/t-linux"
1303         gnu_ld=yes
1304         use_fixproto=yes
1305         if test x$enable_threads = xyes; then
1306                 thread_file='posix'
1307         fi
1308         ;;
1309 m32rle-*-linux*)
1310         tm_file="dbxelf.h elfos.h svr4.h linux.h m32r/little.h ${tm_file} m32r/linux.h"
1311         # We override the tmake_file for linux -- why?
1312         tmake_file="t-slibgcc-elf-ver m32r/t-linux"
1313         gnu_ld=yes
1314         use_fixproto=yes
1315         if test x$enable_threads = xyes; then
1316                 thread_file='posix'
1317         fi
1318         ;;
1319 # m68hc11 and m68hc12 share the same machine description.
1320 m68hc11-*-*|m6811-*-*)
1321         tm_file="dbxelf.h elfos.h m68hc11/m68hc11.h"
1322         tm_p_file="m68hc11/m68hc11-protos.h"
1323         md_file="m68hc11/m68hc11.md"
1324         out_file="m68hc11/m68hc11.c"
1325         tmake_file="m68hc11/t-m68hc11-gas"
1326         use_fixproto=yes
1327         ;;
1328 m68hc12-*-*|m6812-*-*)
1329         tm_file="m68hc11/m68hc12.h dbxelf.h elfos.h m68hc11/m68hc11.h"
1330         tm_p_file="m68hc11/m68hc11-protos.h"
1331         md_file="m68hc11/m68hc11.md"
1332         out_file="m68hc11/m68hc11.c"
1333         tmake_file="m68hc11/t-m68hc11-gas"
1334         extra_options="${extra_options} m68hc11/m68hc11.opt"
1335         use_fixproto=yes
1336         ;;
1337 m68k-*-aout*)
1338         tmake_file=m68k/t-m68kbare
1339         tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kemb.h m68k/m68k-aout.h libgloss.h"
1340         ;;
1341 m68k-*-coff*)
1342         tmake_file=m68k/t-m68kbare
1343         tm_defines="MOTOROLA USE_GAS"
1344         tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kemb.h dbxcoff.h m68k/coff.h dbx.h"
1345         use_fixproto=yes
1346         ;;
1347 m68020-*-elf* | m68k-*-elf*)
1348         tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h"
1349         tm_defines="MOTOROLA USE_GAS"
1350         tmake_file=m68k/t-m68kelf
1351         extra_parts="crtbegin.o crtend.o"
1352         use_fixproto=yes
1353         ;;
1354 m68010-*-netbsdelf* | m68k*-*-netbsdelf*)
1355         tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h m68k/netbsd-elf.h"
1356         tm_defines="MOTOROLA USE_GAS"
1357         case ${target} in
1358         m68010*)
1359                 target_cpu_default="0"
1360                 ;;
1361         *)
1362                 target_cpu_default="MASK_68020|MASK_68881|MASK_BITFIELD"
1363                 ;;
1364         esac
1365         ;;
1366 m68k*-*-openbsd*)
1367         # needed to unconfuse gdb
1368         tm_defines="OBSD_OLD_GAS TARGET_DEFAULT=(MASK_68020|MASK_68881|MASK_BITFIELD)"
1369         tm_file="m68k/m68k.h openbsd.h m68k/openbsd.h"
1370         tmake_file="t-libc-ok t-openbsd m68k/t-openbsd"
1371         # we need collect2 until our bug is fixed...
1372         use_collect2=yes
1373         ;;
1374 m68k-*-uclinux*)                # Motorola m68k/ColdFire running uClinux with uClibc
1375         tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/uclinux.h"
1376         tm_defines="MOTOROLA USE_GAS"
1377         tmake_file=m68k/t-uclinux
1378         use_fixproto=no
1379         ;;
1380 m68k-*-linux*)          # Motorola m68k's running GNU/Linux
1381                                 # with ELF format using glibc 2
1382                                 # aka the GNU/Linux C library 6.
1383         tm_file="m68k/m68k.h dbxelf.h elfos.h svr4.h linux.h m68k/linux.h"
1384         extra_options="${extra_options} m68k/ieee.opt"
1385         tm_defines="MOTOROLA USE_GAS"
1386         # if not configured with --enable-sjlj-exceptions, bump the
1387         # libgcc version number
1388         if test x$sjlj != x1; then
1389             tmake_file="$tmake_file m68k/t-slibgcc-elf-ver"
1390         fi
1391         ;;
1392 m68k-*-rtems*)
1393         tmake_file="m68k/t-m68kbare m68k/t-crtstuff t-rtems m68k/t-rtems"
1394         tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h"
1395         tm_defines="MOTOROLA USE_GAS"
1396         extra_parts="crtbegin.o crtend.o"
1397         ;;
1398 mcore-*-elf)
1399         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} mcore/mcore-elf.h"
1400         tmake_file=mcore/t-mcore
1401         use_fixproto=yes
1402         ;;
1403 mcore-*-pe*)
1404         tm_file="svr3.h dbxcoff.h ${tm_file} mcore/mcore-pe.h"
1405         tmake_file=mcore/t-mcore-pe
1406         use_fixproto=yes
1407         ;;
1408 mips-sgi-irix[56]*)
1409         tm_file="elfos.h ${tm_file} mips/iris.h"
1410         tmake_file="mips/t-iris mips/t-slibgcc-irix"
1411         target_cpu_default="MASK_ABICALLS"
1412         case ${target} in
1413         *-*-irix5*)
1414                 tm_file="${tm_file} mips/iris5.h"
1415                 ;;
1416
1417         *-*-irix6*)
1418                 tm_file="${tm_file} mips/iris6.h"
1419                 tmake_file="${tmake_file} mips/t-iris6"
1420                 tm_defines="MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_N32"
1421                 ;;
1422         esac
1423         if test "x$stabs" = xyes
1424         then
1425                 tm_file="${tm_file} dbx.h mips/dbxmdebug.h"
1426         fi
1427         if test "x$gnu_ld" = xyes
1428         then
1429                 tm_defines="${tm_defines} IRIX_USING_GNU_LD"
1430         fi
1431 #       if test x$enable_threads = xyes; then
1432 #               thread_file='irix'
1433 #       fi
1434         use_fixproto=yes
1435         ;;
1436 mips*-*-netbsd*)                        # NetBSD/mips, either endian.
1437         target_cpu_default="MASK_ABICALLS"
1438         tm_file="elfos.h ${tm_file} mips/elf.h netbsd.h netbsd-elf.h mips/netbsd.h"
1439         ;;
1440 mips64*-*-linux*)
1441         tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h mips/linux64.h"
1442         tmake_file="${tmake_file} mips/t-linux64"
1443         tm_defines="MIPS_ABI_DEFAULT=ABI_N32"
1444         gnu_ld=yes
1445         gas=yes
1446         ;;
1447 mips*-*-linux*)                         # Linux MIPS, either endian.
1448         tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h"
1449         case ${target} in
1450         mipsisa32*-*)
1451                 target_cpu_default="MASK_SOFT_FLOAT"
1452                 tm_defines="MIPS_ISA_DEFAULT=32"
1453                 ;;
1454         esac
1455         ;;
1456 mips*-*-openbsd*)
1457         tm_defines="OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_OBJECT OBSD_HAS_CORRECT_SPECS"
1458         target_cpu_default="MASK_ABICALLS"
1459         tm_file="mips/mips.h openbsd.h mips/openbsd.h mips/sdb.h"
1460         case ${target} in
1461         mips*el-*-openbsd*)
1462             tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=0";;
1463         *)  tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=MASK_BIG_ENDIAN";;
1464         esac
1465         ;;
1466 mipsisa32-*-elf* | mipsisa32el-*-elf*)
1467         tm_file="elfos.h ${tm_file} mips/elf.h"
1468         tmake_file=mips/t-isa3264
1469         tm_defines="MIPS_ISA_DEFAULT=32 MIPS_ABI_DEFAULT=ABI_EABI"
1470         use_fixproto=yes
1471         ;;
1472 mipsisa32r2-*-elf* | mipsisa32r2el-*-elf*)
1473         tm_file="elfos.h ${tm_file} mips/elf.h"
1474         tmake_file=mips/t-isa3264
1475         tm_defines="MIPS_ISA_DEFAULT=33 MIPS_ABI_DEFAULT=ABI_EABI"
1476         use_fixproto=yes
1477         ;;
1478 mipsisa64-*-elf* | mipsisa64el-*-elf*)
1479         tm_file="elfos.h ${tm_file} mips/elf.h"
1480         tmake_file=mips/t-isa3264
1481         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1482         tm_defines="MIPS_ISA_DEFAULT=64 MIPS_ABI_DEFAULT=ABI_EABI"
1483         use_fixproto=yes
1484         ;;
1485 mipsisa64sr71k-*-elf*)
1486         tm_file="elfos.h ${tm_file} mips/elf.h"
1487         tmake_file=mips/t-sr71k
1488         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1489         tm_defines="MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sr71000\\\" MIPS_ABI_DEFAULT=ABI_EABI"
1490         use_fixproto=yes
1491         ;;
1492 mipsisa64sb1-*-elf* | mipsisa64sb1el-*-elf*)
1493         tm_file="elfos.h ${tm_file} mips/elf.h"
1494         tmake_file=mips/t-elf
1495         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1496         tm_defines="MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sb1\\\" MIPS_ABI_DEFAULT=ABI_O64"
1497         use_fixproto=yes
1498         ;;
1499 mips-*-elf* | mipsel-*-elf*)
1500         tm_file="elfos.h ${tm_file} mips/elf.h"
1501         tmake_file=mips/t-elf
1502         use_fixproto=yes
1503         ;;
1504 mips64-*-elf* | mips64el-*-elf*)
1505         tm_file="elfos.h ${tm_file} mips/elf.h"
1506         tmake_file=mips/t-elf
1507         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1508         tm_defines="MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1509         use_fixproto=yes
1510         ;;
1511 mips64vr-*-elf* | mips64vrel-*-elf*)
1512         tm_file="mips/vr.h elfos.h ${tm_file} mips/elf.h"
1513         tmake_file=mips/t-vr
1514         use_fixproto=yes
1515         ;;
1516 mips64orion-*-elf* | mips64orionel-*-elf*)
1517         tm_file="elfos.h ${tm_file} mips/elforion.h mips/elf.h"
1518         tmake_file=mips/t-elf
1519         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1520         tm_defines="MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1521         use_fixproto=yes
1522         ;;
1523 mips*-*-rtems*)
1524         tm_file="elfos.h ${tm_file} mips/elf.h mips/rtems.h rtems.h"
1525         tmake_file="mips/t-elf t-rtems mips/t-rtems"
1526         ;;
1527 mips-wrs-vxworks)
1528         # We want vxworks.h after mips/elf.h, which unfortunately means we
1529         # have to redo the tm_file list from scratch.
1530         tm_file="elfos.h mips/mips.h svr4.h mips/elf.h vxworks.h mips/vxworks.h"
1531         tmake_file="${tmake_file} mips/t-vxworks"
1532         ;;
1533 mips-wrs-windiss)       # Instruction-level simulator for VxWorks.
1534         xm_defines=POSIX
1535         tm_file="elfos.h mips/mips.h svr4.h mips/elf.h windiss.h mips/windiss.h"
1536         tmake_file="${tmake_file} mips/t-elf"
1537         thread_file=
1538         ;;
1539 mipstx39-*-elf* | mipstx39el-*-elf*)
1540         tm_file="elfos.h ${tm_file} mips/r3900.h mips/elf.h"
1541         tmake_file=mips/t-r3900
1542         use_fixproto=yes
1543         ;;
1544 mmix-knuth-mmixware)
1545         need_64bit_hwint=yes
1546         ;;
1547 mn10300-*-*)
1548         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
1549         if test x$stabs = xyes
1550         then
1551                 tm_file="${tm_file} dbx.h"
1552         fi
1553         use_collect2=no
1554         use_fixproto=yes
1555         ;;
1556 ms1-*-elf)
1557         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
1558         tmake_file="${tmake_file} ms1/t-ms1"
1559         ;;
1560 ns32k-*-netbsdelf*)
1561         echo "GCC does not yet support the ${target} target"; exit 1
1562         ;;
1563 ns32k-*-netbsd*)
1564         tm_file="${tm_file} netbsd.h netbsd-aout.h ns32k/netbsd.h"
1565         # On NetBSD, the headers are already okay, except for math.h.
1566         tmake_file="t-netbsd ns32k/t-ns32k"
1567         extra_parts=""
1568         use_collect2=yes
1569         ;;
1570 pdp11-*-bsd)
1571         tm_file="${tm_file} pdp11/2bsd.h"
1572         use_fixproto=yes
1573         ;;
1574 pdp11-*-*)
1575         use_fixproto=yes
1576         ;;
1577 # port not yet contributed
1578 #powerpc-*-openbsd*)
1579 #       tmake_file="${tmake_file} rs6000/t-fprules "
1580 #       extra_headers=
1581 #       ;;
1582 powerpc64-*-linux*)
1583         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1584         test x$with_cpu != x || cpu_is_64bit=yes
1585         test x$cpu_is_64bit != xyes || tm_file="${tm_file} rs6000/default64.h"
1586         tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h"
1587         if test x${enable_secureplt} = xyes; then
1588                 tm_file="rs6000/secureplt.h ${tm_file}"
1589         fi
1590         extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt"
1591         tmake_file="rs6000/t-fprules ${tmake_file} rs6000/t-ppccomm rs6000/t-linux64"
1592         ;;
1593 powerpc64-*-gnu*)
1594         tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux64.h rs6000/gnu.h"
1595         extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt"
1596         tmake_file="rs6000/t-fprules t-slibgcc-elf-ver t-gnu rs6000/t-linux64"
1597         ;;
1598 powerpc-*-beos*)
1599         tm_file="${tm_file} rs6000/aix.h rs6000/beos.h rs6000/xcoff.h"
1600         tmake_file="rs6000/t-fprules rs6000/t-beos"
1601         extra_headers=
1602         use_fixproto=yes
1603         ;;
1604 powerpc-*-darwin*)
1605         tm_file="${tm_file} rs6000/darwin.h"
1606         tmake_file="${tmake_file} rs6000/t-darwin"
1607         extra_options="${extra_options} rs6000/darwin.opt"
1608         case ${target} in
1609           *-darwin1[0-9]* | *-darwin[8-9]*)
1610             tmake_file="${tmake_file} rs6000/t-darwin8"
1611             tm_file="${tm_file} rs6000/darwin8.h"
1612             ;;
1613           *-darwin7*)
1614             tm_file="${tm_file} rs6000/darwin7.h"
1615             ;;
1616           *-darwin[0-6]*)
1617             ;;
1618         esac
1619         extra_headers=altivec.h
1620         ;;
1621 powerpc*-*-freebsd*)
1622         tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} rs6000/sysv4.h rs6000/freebsd.h"
1623         tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1624         extra_options="${extra_options} rs6000/sysv4.opt"
1625         ;;
1626 powerpc-*-netbsd*)
1627         tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h freebsd-spec.h rs6000/sysv4.h rs6000/netbsd.h"
1628         tmake_file="${tmake_file} rs6000/t-netbsd"
1629         extra_options="${extra_options} rs6000/sysv4.opt"
1630         ;;
1631 powerpc-*-chorusos*)
1632         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h chorus.h"
1633         tmake_file="rs6000/t-fprules rs6000/t-ppcos rs6000/t-ppccomm"
1634         extra_options="${extra_options} rs6000/sysv4.opt"
1635         case ${enable_threads} in
1636           yes | posix)
1637             thread_file='posix'
1638             ;;
1639         esac
1640         use_fixproto=yes
1641         ;;
1642 powerpc-*-eabispe*)
1643         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabispe.h"
1644         extra_options="${extra_options} rs6000/sysv4.opt"
1645         tmake_file="rs6000/t-spe rs6000/t-ppccomm"
1646         ;;
1647 powerpc-*-eabisimaltivec*)
1648         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h rs6000/eabialtivec.h"
1649         extra_options="${extra_options} rs6000/sysv4.opt"
1650         tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm"
1651         ;;
1652 powerpc-*-eabisim*)
1653         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h"
1654         extra_options="${extra_options} rs6000/sysv4.opt"
1655         tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1656         ;;
1657 powerpc-*-elf*)
1658         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1659         extra_options="${extra_options} rs6000/sysv4.opt"
1660         tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1661         use_fixproto=yes
1662         ;;
1663 powerpc-*-eabialtivec*)
1664         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabialtivec.h"
1665         extra_options="${extra_options} rs6000/sysv4.opt"
1666         tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm"
1667         ;;
1668 powerpc-*-eabi*)
1669         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h"
1670         extra_options="${extra_options} rs6000/sysv4.opt"
1671         tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1672         ;;
1673 powerpc-*-rtems*)
1674         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/rtems.h rtems.h"
1675         extra_options="${extra_options} rs6000/sysv4.opt"
1676         tmake_file="rs6000/t-fprules rs6000/t-rtems t-rtems rs6000/t-ppccomm"
1677         ;;
1678 powerpc-*-linux*altivec*)
1679         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h"
1680         extra_options="${extra_options} rs6000/sysv4.opt"
1681         tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1682         ;;
1683 powerpc-*-linux*spe*)
1684         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxspe.h"
1685         extra_options="${extra_options} rs6000/sysv4.opt"
1686         tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1687         ;;
1688 powerpc-*-linux*)
1689         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1690         extra_options="${extra_options} rs6000/sysv4.opt"
1691         tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1692         case ${enable_targets}:${cpu_is_64bit} in
1693             *powerpc64* | all:* | *:yes)
1694                 if test x$cpu_is_64bit = xyes; then
1695                     tm_file="${tm_file} rs6000/default64.h"
1696                 fi
1697                 tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h"
1698                 tmake_file="$tmake_file rs6000/t-linux64"
1699                 extra_options="${extra_options} rs6000/linux64.opt"
1700                 ;;
1701             *)
1702                 tm_file="${tm_file} rs6000/linux.h"
1703                 ;;
1704         esac
1705         if test x${enable_secureplt} = xyes; then
1706                 tm_file="rs6000/secureplt.h ${tm_file}"
1707         fi
1708         ;;
1709 powerpc-*-gnu-gnualtivec*)
1710         tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h rs6000/gnu.h"
1711         extra_options="${extra_options} rs6000/sysv4.opt"
1712         tmake_file="rs6000/t-fprules rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm"
1713         if test x$enable_threads = xyes; then
1714                 thread_file='posix'
1715         fi
1716         ;;
1717 powerpc-*-gnu*)
1718         tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/gnu.h"
1719         tmake_file="rs6000/t-fprules rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm"
1720         extra_options="${extra_options} rs6000/sysv4.opt"
1721         if test x$enable_threads = xyes; then
1722                 thread_file='posix'
1723         fi
1724         ;;
1725 powerpc-wrs-vxworks*)
1726         # We want vxworks.h after rs6000/sysv4.h, which unfortunately
1727         # means we have to redo the tm_file list from scratch.
1728         tm_file="rs6000/rs6000.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1729         tm_file="${tm_file} vxworks.h rs6000/vxworks.h"
1730         tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-ppccomm rs6000/t-vxworks"
1731         extra_options="${extra_options} rs6000/sysv4.opt"
1732         extra_headers=ppc-asm.h
1733         ;;
1734 powerpc-wrs-windiss*)   # Instruction-level simulator for VxWorks.
1735         tm_file="${tm_file} elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/windiss.h"
1736         tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1737         extra_options="${extra_options} rs6000/sysv4.opt"
1738         thread_file=""
1739         use_fixproto=yes
1740         ;;
1741 powerpc-*-lynxos*)
1742         xm_defines=POSIX
1743         tm_file="${tm_file} dbxelf.h elfos.h rs6000/sysv4.h rs6000/lynx.h lynx.h"
1744         tmake_file="t-lynx rs6000/t-lynx"
1745         extra_options="${extra_options} rs6000/sysv4.opt lynx.opt"
1746         extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
1747         extra_options="${extra_options} lynx.opt"
1748         thread_file=lynx
1749         gnu_ld=yes
1750         gas=yes
1751         ;;
1752 powerpcle-*-sysv*)
1753         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h"
1754         tmake_file="rs6000/t-fprules rs6000/t-ppcos rs6000/t-ppccomm"
1755         extra_options="${extra_options} rs6000/sysv4.opt"
1756         use_fixproto=yes
1757         ;;
1758 powerpcle-*-elf*)
1759         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h"
1760         tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1761         extra_options="${extra_options} rs6000/sysv4.opt"
1762         use_fixproto=yes
1763         ;;
1764 powerpcle-*-eabisim*)
1765         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/eabisim.h"
1766         tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1767         extra_options="${extra_options} rs6000/sysv4.opt"
1768         ;;
1769 powerpcle-*-eabi*)
1770         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h"
1771         tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1772         extra_options="${extra_options} rs6000/sysv4.opt"
1773         ;;
1774 powerpc-*-kaos*)
1775         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h kaos.h rs6000/kaos-ppc.h"
1776         tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1777         extra_options="${extra_options} rs6000/sysv4.opt"
1778         ;;
1779 powerpcle-*-kaos*)
1780         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h kaos.h rs6000/kaos-ppc.h"
1781         tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1782         extra_options="${extra_options} rs6000/sysv4.opt"
1783         ;;
1784 rs6000-ibm-aix4.[12]* | powerpc-ibm-aix4.[12]*)
1785         tm_file="${tm_file} rs6000/aix.h rs6000/aix41.h rs6000/xcoff.h"
1786         tmake_file="rs6000/t-fprules rs6000/t-newas"
1787         extra_options="${extra_options} rs6000/aix41.opt"
1788         use_collect2=yes
1789         extra_headers=
1790         use_fixproto=yes
1791         ;;
1792 rs6000-ibm-aix4.[3456789]* | powerpc-ibm-aix4.[3456789]*)
1793         tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix43.h rs6000/xcoff.h"
1794         tmake_file=rs6000/t-aix43
1795         extra_options="${extra_options} rs6000/aix64.opt"
1796         use_collect2=yes
1797         thread_file='aix'
1798         extra_headers=
1799         ;;
1800 rs6000-ibm-aix5.1.* | powerpc-ibm-aix5.1.*)
1801         tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix51.h rs6000/xcoff.h"
1802         extra_options="${extra_options} rs6000/aix64.opt"
1803         tmake_file=rs6000/t-aix43
1804         use_collect2=yes
1805         thread_file='aix'
1806         extra_headers=
1807         ;;
1808 rs6000-ibm-aix[56789].* | powerpc-ibm-aix[56789].*)
1809         tm_file="${tm_file} rs6000/aix.h rs6000/aix52.h rs6000/xcoff.h"
1810         tmake_file=rs6000/t-aix52
1811         extra_options="${extra_options} rs6000/aix64.opt"
1812         use_collect2=yes
1813         thread_file='aix'
1814         extra_headers=
1815         ;;
1816 s390-*-linux*)
1817         tm_file="s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h"
1818         tmake_file="${tmake_file} s390/t-crtstuff"
1819         ;;
1820 s390x-*-linux*)
1821         tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h"
1822         tm_p_file=s390/s390-protos.h
1823         md_file=s390/s390.md
1824         extra_modes=s390/s390-modes.def
1825         out_file=s390/s390.c
1826         tmake_file="${tmake_file} s390/t-crtstuff s390/t-linux64"
1827         ;;
1828 s390x-ibm-tpf*)
1829         tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h s390/tpf.h"
1830         tm_p_file=s390/s390-protos.h
1831         md_file=s390/s390.md
1832         extra_modes=s390/s390-modes.def
1833         out_file=s390/s390.c
1834         extra_parts="crtbeginS.o crtendS.o"
1835         tmake_file="s390/t-crtstuff s390/t-tpf"
1836         thread_file='tpf'
1837         extra_options="${extra_options} s390/tpf.opt"
1838         ;;
1839 sh-*-elf* | sh[12346l]*-*-elf* | sh*-*-kaos* | \
1840 sh-*-symbianelf* | sh[12346l]*-*-symbianelf* | \
1841   sh-*-linux* | sh[346lbe]*-*-linux* | \
1842   sh-*-netbsdelf* | shl*-*-netbsdelf* | sh5-*-netbsd* | sh5l*-*-netbsd* | \
1843    sh64-*-netbsd* | sh64l*-*-netbsd*)
1844         tmake_file="${tmake_file} sh/t-sh sh/t-elf"
1845         if test x${with_endian} = x; then
1846                 case ${target} in
1847                 sh[1234]*be-*-* | sh[1234]*eb-*-*) with_endian=big ;;
1848                 shbe-*-* | sheb-*-*)               with_endian=big,little ;;
1849                 sh[1234]l* | sh[34]*-*-linux*)     with_endian=little ;;
1850                 shl* | sh64l* | sh*-*-linux* | \
1851                   sh5l* | sh-superh-elf)           with_endian=little,big ;;
1852                 sh[1234]*-*-*)                     with_endian=big ;;
1853                 *)                                 with_endian=big,little ;;
1854                 esac
1855         fi
1856         case ${with_endian} in
1857         big|little)     tmake_file="${tmake_file} sh/t-1e" ;;
1858         big,little|little,big) ;;
1859         *)      echo "with_endian=${with_endian} not supported."; exit 1 ;;
1860         esac
1861         case ${with_endian} in
1862         little*)        tm_file="sh/little.h ${tm_file}" ;;
1863         esac
1864         tm_file="${tm_file} dbxelf.h elfos.h"
1865         case ${target} in
1866         sh*-*-netbsd*)  ;;
1867         *)              tm_file="${tm_file} svr4.h" ;;
1868         esac
1869         tm_file="${tm_file} sh/elf.h"
1870         case ${target} in
1871         sh*-*-linux*)   tmake_file="${tmake_file} sh/t-linux"
1872                         tm_file="${tm_file} linux.h sh/linux.h" ;;
1873         sh*-*-kaos*)    tm_file="${tm_file} sh/embed-elf.h kaos.h sh/kaos-sh.h"
1874                         ;;
1875         sh*-*-netbsd*)  tm_file="${tm_file} netbsd.h netbsd-elf.h sh/netbsd-elf.h" ;;
1876         *)              tm_file="${tm_file} sh/embed-elf.h" ;;
1877         esac
1878         case ${target} in
1879         sh5*-*-netbsd*)
1880                 # SHmedia, 32-bit ABI
1881                 tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd"
1882                 ;;
1883         sh64*-netbsd*)
1884                 # SHmedia, 64-bit ABI
1885                 tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd sh/t-netbsd-sh5-64"
1886                 ;;
1887         *-*-netbsd)
1888                 tmake_file="${tmake_file} sh/t-netbsd"
1889                 ;;
1890         sh64*-*-linux*)
1891                 tmake_file="${tmake_file} sh/t-sh64 sh/t-linux64"
1892                 tm_file="${tm_file} sh/sh64.h"
1893                 extra_headers="shmedia.h ushmedia.h sshmedia.h"
1894                 ;;
1895         sh64*)
1896                 tmake_file="${tmake_file} sh/t-sh64"
1897                 tm_file="${tm_file} sh/sh64.h"
1898                 extra_headers="shmedia.h ushmedia.h sshmedia.h"
1899                 ;;
1900         *-*-symbianelf*)
1901                 tmake_file="sh/t-symbian"
1902                 tm_file="sh/symbian-pre.h sh/little.h ${tm_file} sh/symbian-post.h"
1903                 extra_objs="symbian.o"
1904                 extra_parts="crt1.o crti.o crtn.o crtbegin.o crtend.o crtbeginS.o crtendS.o"
1905                 ;;
1906         esac
1907         # sed el/eb endian suffixes away to avoid confusion with sh[23]e
1908         case `echo ${target} | sed 's/e[lb]-/-/'` in
1909         sh64*-*-netbsd*)        sh_cpu_target=sh5-64media ;;
1910         sh64* | sh5*-*-netbsd*) sh_cpu_target=sh5-32media ;;
1911         sh4a_single_only*)      sh_cpu_target=sh4a-single-only ;;
1912         sh4a_single*)           sh_cpu_target=sh4a-single ;;
1913         sh4a_nofpu*)            sh_cpu_target=sh4a-nofpu ;;
1914         sh4al)                  sh_cpu_target=sh4al ;;
1915         sh4a*)                  sh_cpu_target=sh4a ;;
1916         sh4_single_only*)       sh_cpu_target=sh4-single-only ;;
1917         sh4_single*)            sh_cpu_target=sh4-single ;;
1918         sh4_nofpu*)             sh_cpu_target=sh4-nofpu ;;
1919         sh4* | sh-superh-*)     sh_cpu_target=sh4 ;;
1920         sh3e*)                  sh_cpu_target=sh3e ;;
1921         sh*-*-netbsd* | sh3*)   sh_cpu_target=sh3 ;;
1922         sh2a_single_only*)      sh_cpu_target=sh2a-single-only ;;
1923         sh2a_single*)           sh_cpu_target=sh2a-single ;;
1924         sh2a_nofpu*)            sh_cpu_target=sh2a-nofpu ;;
1925         sh2a*)                  sh_cpu_target=sh2a ;;
1926         sh2e*)                  sh_cpu_target=sh2e ;;
1927         sh2*)                   sh_cpu_target=sh2 ;;
1928         *)                      sh_cpu_target=sh1 ;;
1929         esac
1930         sh_cpu_default="`echo $with_cpu|sed s/^m/sh/|tr A-Z_ a-z-`"
1931         case $sh_cpu_default in
1932         sh5-64media-nofpu | sh5-64media | \
1933           sh5-32media-nofpu | sh5-32media | sh5-compact-nofpu | sh5-compact | \
1934           sh2a-single-only | sh2a-single | sh2a-nofpu | sh2a | \
1935           sh4a-single-only | sh4a-single | sh4a-nofpu | sh4a | sh4al | \
1936           sh4-single-only | sh4-single | sh4-nofpu | sh4 | \
1937           sh3e | sh3 | sh2e | sh2 | sh1) ;;
1938         "")     sh_cpu_default=${sh_cpu_target} ;;
1939         *)      echo "with_cpu=$with_cpu not supported"; exit 1 ;;
1940         esac
1941         sh_multilibs=${with_multilib_list}
1942         if test x${sh_multilibs} = x ; then
1943                 case ${target} in
1944                 sh[1234]*)      sh_multilibs=${sh_cpu_target} ;;
1945                 sh64* | sh5*)   sh_multilibs=m5-32media,m5-32media-nofpu,m5-compact,m5-compact-nofpu,m5-64media,m5-64media-nofpu ;;
1946                 sh-superh-*)    sh_multilibs=m4,m4-single,m4-single-only,m4-nofpu ;;
1947                 sh*-*-linux*)   sh_multilibs=m1,m3e,m4 ;;
1948                 sh*-*-netbsd*)  sh_multilibs=m3,m3e,m4 ;;
1949                 *) sh_multilibs=m1,m2,m2e,m4,m4-single,m4-single-only,m2a,m2a-single ;;
1950                 esac
1951         fi
1952         target_cpu_default=SELECT_`echo ${sh_cpu_default}|tr a-z- A-Z_`
1953         tm_defines=${tm_defines}' SH_MULTILIB_CPU_DEFAULT=\"'`echo $sh_cpu_default|sed s/sh/m/`'\"'
1954         sh_multilibs=`echo $sh_multilibs,$sh_cpu_default | sed -e 's/[  ,/][    ,]*/ /g' -e 's/ $//' -e s/^m/sh/ -e 's/ m/ sh/g' | tr A-Z_ a-z-`
1955         for sh_multilib in ${sh_multilibs}; do
1956                 case ${sh_multilib} in
1957                 sh1 | sh2 | sh2e | sh3 | sh3e | \
1958                 sh4 | sh4-single | sh4-single-only | sh4-nofpu | \
1959                 sh4a | sh4a-single | sh4a-single-only | sh4a-nofpu | sh4al | \
1960                 sh2a | sh2a-single | sh2a-single-only | sh2a-nofpu | \
1961                 sh5-64media | sh5-64media-nofpu | \
1962                 sh5-32media | sh5-32media-nofpu | \
1963                 sh5-compact | sh5-compact-nofpu)
1964                         tmake_file="${tmake_file} sh/t-mlib-${sh_multilib}"
1965                         tm_defines="$tm_defines SUPPORT_`echo $sh_multilib|tr a-z- A-Z_`=1"
1966                         ;;
1967                 *)
1968                         echo "with_multilib_list=${sh_multilib} not supported."
1969                         exit 1
1970                         ;;
1971                 esac
1972         done
1973         if test x${enable_incomplete_targets} == xyes ; then
1974                 tm_defines="$tm_defines SUPPORT_SH1=1 SUPPORT_SH2E=1 SUPPORT_SH4=1 SUPPORT_SH4_SINGLE=1 SUPPORT_SH2A=1 SUPPORT_SH2A_SINGLE=1 SUPPORT_SH5_32MEDIA=1 SUPPORT_SH5_32MEDIA_NOFPU=1 SUPPORT_SH5_64MEDIA=1 SUPPORT_SH5_64MEDIA_NOFPU=1"
1975         fi
1976         use_fixproto=yes
1977         ;;
1978 sh-*-rtemscoff*)
1979         tmake_file="sh/t-sh t-rtems sh/t-rtems"
1980         tm_file="${tm_file} dbxcoff.h sh/coff.h sh/rtems.h rtems.h"
1981         ;;
1982 sh-*-rtems*)
1983         tmake_file="sh/t-sh sh/t-elf t-rtems sh/t-rtems"
1984         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h"
1985         ;;
1986 sh-wrs-vxworks)
1987         tmake_file="$tmake_file sh/t-sh sh/t-elf sh/t-vxworks"
1988         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/embed-elf.h sh/vxworks.h"
1989         ;;
1990 sh-*-*)
1991         tm_file="${tm_file} dbxcoff.h sh/coff.h"
1992         use_fixproto=yes
1993         ;;
1994 sparc-*-netbsdelf*)
1995         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
1996         extra_options="${extra_options} sparc/long-double-switch.opt"
1997         ;;
1998 sparc64-*-openbsd*)
1999         tm_file="sparc/openbsd1-64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h openbsd.h sparc/openbsd64.h"
2000         extra_options="${extra_options} sparc/little-endian.opt"
2001         gas=yes gnu_ld=yes
2002         with_cpu=ultrasparc
2003         ;;
2004 sparc-*-elf*)
2005         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp-elf.h"
2006         tmake_file="sparc/t-elf sparc/t-crtfm"
2007         extra_parts="crti.o crtn.o crtbegin.o crtend.o"
2008         use_fixproto=yes
2009         ;;
2010 sparc-*-linux*)         # SPARC's running GNU/Linux, libc6
2011         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux.h"
2012         extra_options="${extra_options} sparc/long-double-switch.opt"
2013         tmake_file="${tmake_file} sparc/t-crtfm"
2014         ;;
2015 sparc-*-rtems*)
2016         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp-elf.h sparc/rtemself.h rtems.h"
2017         tmake_file="sparc/t-elf sparc/t-crtfm t-rtems"
2018         extra_parts="crti.o crtn.o crtbegin.o crtend.o"
2019         ;;
2020 sparc64-*-solaris2* | sparcv9-*-solaris2*)
2021         tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/sol2-64.h sparc/sol2-bi.h"
2022         if test x$gnu_ld = xyes; then
2023                 tm_file="${tm_file} sparc/sol2-gld.h sparc/sol2-gld-bi.h"
2024         fi
2025         if test x$gas = xyes; then
2026                 tm_file="${tm_file} sparc/sol2-gas.h sparc/sol2-gas-bi.h"
2027         fi
2028         tm_file="${tm_file} tm-dwarf2.h"
2029         tmake_file="t-sol2 sparc/t-sol2 sparc/t-sol2-64 sparc/t-crtfm"
2030         if test x$gnu_ld = xyes; then
2031                 tmake_file="$tmake_file t-slibgcc-elf-ver"
2032         else
2033                 tmake_file="$tmake_file t-slibgcc-sld"
2034         fi
2035         c_target_objs="sol2-c.o"
2036         cxx_target_objs="sol2-c.o"
2037         extra_objs="sol2.o"
2038         tm_p_file="${tm_p_file} sol2-protos.h"
2039         extra_parts="crt1.o crti.o crtn.o gcrt1.o crtbegin.o crtend.o"
2040         case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
2041           "":yes:* | yes:yes:* ) thread_file=posix ;;
2042           "":*:yes | yes:*:yes ) thread_file=solaris ;;
2043         esac
2044         need_64bit_hwint=yes
2045         ;;
2046 sparc-*-solaris2*)
2047         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h"
2048         case ${target} in
2049         *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
2050                 tm_file="${tm_file} sol26.h"
2051         esac
2052         tm_file="${tm_file} sparc/sol2.h"
2053         if test x$gnu_ld = xyes; then
2054                 tm_file="${tm_file} sparc/sol2-gld.h"
2055         fi
2056         if test x$gas = xyes; then
2057                 tm_file="${tm_file} sparc/sol2-gas.h"
2058         fi
2059         tmake_file="t-sol2 sparc/t-sol2 sparc/t-crtfm"
2060         if test x$gnu_ld = xyes; then
2061                 tmake_file="$tmake_file t-slibgcc-elf-ver"
2062         else
2063                 tmake_file="$tmake_file t-slibgcc-sld"
2064         fi
2065         case ${target} in
2066         *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
2067                 if test x$gnu_ld = xno; then
2068                         tm_file="${tm_file} sparc/sol26-sld.h"
2069                 fi
2070                 ;;
2071         *-*-solaris2.[789] | *-*-solaris2.1[0-9]*)
2072                 tm_file="sparc/biarch64.h ${tm_file} sparc/sol2-bi.h"
2073                 if test x$gnu_ld = xyes; then
2074                         tm_file="${tm_file} sparc/sol2-gld-bi.h"
2075                 fi
2076                 if test x$gas = xyes; then
2077                         tm_file="${tm_file} sparc/sol2-gas-bi.h"
2078                 fi
2079                 tm_file="${tm_file} tm-dwarf2.h"
2080                 tmake_file="$tmake_file sparc/t-sol2-64"
2081                 need_64bit_hwint=yes
2082                 ;;
2083         esac
2084         c_target_objs="sol2-c.o"
2085         cxx_target_objs="sol2-c.o"
2086         extra_objs="sol2.o"
2087         tm_p_file="${tm_p_file} sol2-protos.h"
2088         extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
2089         case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
2090           "":yes:* | yes:yes:* )
2091                 case ${target} in
2092                   *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
2093                         thread_file=posix95
2094                         ;;
2095                   *)
2096                         thread_file=posix
2097                         ;;
2098                 esac
2099                 ;;
2100           "":*:yes | yes:*:yes )
2101                 thread_file=solaris
2102                 ;;
2103         esac
2104         ;;
2105 sparc-*-sysv4*)
2106         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sysv4-only.h"
2107         tmake_file=t-svr4
2108         extra_parts="crtbegin.o crtend.o"
2109         use_fixproto=yes
2110         ;;
2111 sparc64-*-elf*)
2112         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h"
2113         extra_options="${extra_options} sparc/little-endian.opt"
2114         tmake_file="${tmake_file} sparc/t-crtfm"
2115         extra_parts="crtbegin.o crtend.o"
2116         use_fixproto=yes
2117         ;;
2118 sparc64-*-freebsd*|ultrasparc-*-freebsd*)
2119         tm_file="${tm_file} ${fbsd_tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/freebsd.h"
2120         extra_options="${extra_options} sparc/long-double-switch.opt"
2121         tmake_file="${tmake_file} sparc/t-crtfm"
2122         case "x$with_cpu" in
2123                 xultrasparc) ;;
2124                 x) with_cpu=ultrasparc ;;
2125                 *) echo "$with_cpu not supported for freebsd target"; exit 1 ;;
2126         esac
2127         need_64bit_hwint=yes
2128         ;;
2129 sparc64-*-linux*)               # 64-bit SPARC's running GNU/Linux
2130         tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux64.h"
2131         extra_options="${extra_options} sparc/long-double-switch.opt"
2132         tmake_file="${tmake_file} sparc/t-linux64 sparc/t-crtfm"
2133         ;;
2134 sparc64-*-netbsd*)
2135         tm_file="sparc/biarch64.h ${tm_file}"
2136         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
2137         extra_options="${extra_options} sparc/long-double-switch.opt"
2138         tmake_file="${tmake_file} sparc/t-netbsd64"
2139         ;;
2140 strongarm-*-elf*)
2141         tm_file="arm/strongarm-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
2142         tmake_file="arm/t-arm arm/t-strongarm-elf"
2143         out_file=arm/arm.c
2144         md_file=arm/arm.md
2145         extra_modes=arm/arm-modes.def
2146         use_fixproto=yes
2147         ;;
2148 strongarm-*-pe)
2149         tm_file="arm/semi.h arm/aout.h arm/coff.h dbxcoff.h arm/strongarm-coff.h arm/arm.h arm/pe.h arm/strongarm-pe.h"
2150         tmake_file="arm/t-arm arm/t-strongarm-pe"
2151         out_file=arm/arm.c
2152         md_file=arm/arm.md
2153         extra_modes=arm/arm-modes.def
2154         extra_options="${extra_options} arm/pe.opt"
2155         extra_objs=pe.o
2156         use_fixproto=yes
2157         ;;
2158 strongarm-*-kaos*)
2159         tm_file="arm/strongarm-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h kaos.h arm/kaos-strongarm.h"
2160         tmake_file="arm/t-arm arm/t-strongarm-elf"
2161         out_file=arm/arm.c
2162         md_file=arm/arm.md
2163         extra_modes=arm/arm-modes.def
2164         ;;
2165 v850e1-*-*)
2166         target_cpu_default="TARGET_CPU_v850e1"
2167         tm_file="dbxelf.h elfos.h svr4.h v850/v850.h"
2168         tm_p_file=v850/v850-protos.h
2169         tmake_file=v850/t-v850e
2170         md_file=v850/v850.md
2171         out_file=v850/v850.c
2172         extra_options="${extra_options} v850/v850.opt"
2173         if test x$stabs = xyes
2174         then
2175                 tm_file="${tm_file} dbx.h"
2176         fi
2177         use_collect2=no
2178         c_target_objs="v850-c.o"
2179         cxx_target_objs="v850-c.o"
2180         use_fixproto=yes
2181         ;;
2182 v850e-*-*)
2183         target_cpu_default="TARGET_CPU_v850e"
2184         tm_file="dbxelf.h elfos.h svr4.h v850/v850.h"
2185         tm_p_file=v850/v850-protos.h
2186         tmake_file=v850/t-v850e
2187         md_file=v850/v850.md
2188         out_file=v850/v850.c
2189         extra_options="${extra_options} v850/v850.opt"
2190         if test x$stabs = xyes
2191         then
2192                 tm_file="${tm_file} dbx.h"
2193         fi
2194         use_collect2=no
2195         c_target_objs="v850-c.o"
2196         cxx_target_objs="v850-c.o"
2197         use_fixproto=yes
2198         ;;
2199 v850-*-*)
2200         target_cpu_default="TARGET_CPU_generic"
2201         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
2202         tmake_file=v850/t-v850
2203         if test x$stabs = xyes
2204         then
2205                 tm_file="${tm_file} dbx.h"
2206         fi
2207         use_collect2=no
2208         c_target_objs="v850-c.o"
2209         cxx_target_objs="v850-c.o"
2210         use_fixproto=yes
2211         ;;
2212 vax-*-bsd*)                     # VAXen running BSD
2213         tm_file="${tm_file} vax/bsd.h"
2214         tmake_file=vax/t-memfuncs
2215         use_collect2=yes
2216         use_fixproto=yes
2217         ;;
2218 vax-*-sysv*)                    # VAXen running system V
2219         tm_file="${tm_file} vax/vaxv.h"
2220         tmake_file=vax/t-memfuncs
2221         use_fixproto=yes
2222         ;;
2223 vax-*-netbsdelf*)
2224         tm_file="${tm_file} elfos.h netbsd.h netbsd-elf.h vax/elf.h vax/netbsd-elf.h"
2225         ;;
2226 vax-*-netbsd*)
2227         tm_file="${tm_file} netbsd.h netbsd-aout.h vax/netbsd.h"
2228         tmake_file=t-netbsd
2229         extra_parts=""
2230         use_collect2=yes
2231         ;;
2232 vax-*-openbsd*)
2233         tm_file="vax/vax.h vax/openbsd1.h openbsd.h vax/openbsd.h"
2234         use_collect2=yes
2235         ;;
2236 vax-*-ultrix*)                  # VAXen running ultrix
2237         tm_file="${tm_file} vax/ultrix.h"
2238         tmake_file=vax/t-memfuncs
2239         use_fixproto=yes
2240         ;;
2241 xscale-*-elf)
2242         tm_file="arm/xscale-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
2243         tmake_file="arm/t-arm arm/t-xscale-elf"
2244         out_file=arm/arm.c
2245         md_file=arm/arm.md
2246         extra_modes=arm/arm-modes.def
2247         use_fixproto=yes
2248         ;;
2249 xscale-*-coff)
2250         tm_file="arm/semi.h arm/aout.h arm/coff.h dbxcoff.h arm/xscale-coff.h arm/arm.h"
2251         tmake_file="arm/t-arm arm/t-xscale-coff"
2252         out_file=arm/arm.c
2253         md_file=arm/arm.md
2254         extra_modes=arm/arm-modes.def
2255         use_fixproto=yes
2256         ;;
2257 xstormy16-*-elf)
2258         # For historical reasons, the target files omit the 'x'.
2259         tm_file="dbxelf.h elfos.h svr4.h stormy16/stormy16.h"
2260         tm_p_file=stormy16/stormy16-protos.h
2261         md_file=stormy16/stormy16.md
2262         out_file=stormy16/stormy16.c
2263         extra_options=stormy16/stormy16.opt
2264         tmake_file="stormy16/t-stormy16"
2265         extra_parts="crtbegin.o crtend.o"
2266         use_fixproto=yes
2267         ;;
2268 xtensa-*-elf*)
2269         tm_file="${tm_file} dbxelf.h elfos.h svr4.h xtensa/elf.h"
2270         tmake_file="xtensa/t-xtensa xtensa/t-elf"
2271         ;;
2272 xtensa-*-linux*)
2273         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h xtensa/linux.h"
2274         tmake_file="${tmake_file} xtensa/t-xtensa xtensa/t-linux"
2275         ;;
2276 am33_2.0-*-linux*)
2277         tm_file="mn10300/mn10300.h dbxelf.h elfos.h linux.h mn10300/linux.h"
2278         tmake_file="${tmake_file} mn10300/t-linux"
2279         gas=yes gnu_ld=yes
2280         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
2281         use_collect2=no
2282         ;;
2283 m32c-*-elf*)
2284         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
2285         c_target_objs="m32c-pragma.o"
2286         cxx_target_objs="m32c-pragma.o"
2287         use_fixproto=yes
2288         ;;
2289 *)
2290         echo "*** Configuration ${target} not supported" 1>&2
2291         exit 1
2292         ;;
2293 esac
2294
2295 case ${target} in
2296 i[34567]86-*-linux*aout* | i[34567]86-*-linux*libc1)
2297         tmake_file="${tmake_file} i386/t-gmm_malloc"
2298         ;;
2299 i[34567]86-*-linux* | x86_64-*-linux*)
2300         tmake_file="${tmake_file} i386/t-pmm_malloc"
2301         ;;
2302 i[34567]86-*-* | x86_64-*-*)
2303         tmake_file="${tmake_file} i386/t-gmm_malloc"
2304         ;;
2305 esac
2306
2307 # Support for --with-cpu and related options (and a few unrelated options,
2308 # too).
2309 case ${with_cpu} in
2310   yes | no)
2311     echo "--with-cpu must be passed a value" 1>&2
2312     exit 1
2313     ;;
2314 esac
2315
2316 # If there is no $with_cpu option, try to infer one from ${target}.
2317 # This block sets nothing except for with_cpu.
2318 if test x$with_cpu = x ; then
2319   case ${target} in
2320     ep9312-*-*)
2321       # A Cirrus ARM variant.
2322       with_cpu="ep9312"
2323       ;;
2324     i486-*-*)
2325       with_cpu=i486
2326       ;;
2327     i586-*-*)
2328       case ${target_noncanonical} in
2329         k6_2-*)
2330           with_cpu=k6-2
2331           ;;
2332         k6_3-*)
2333           with_cpu=k6-3
2334           ;;
2335         k6-*)
2336           with_cpu=k6
2337           ;;
2338         pentium_mmx-*|winchip_c6-*|winchip2-*|c3-*)
2339           with_cpu=pentium-mmx
2340           ;;
2341         *)
2342           with_cpu=pentium
2343           ;;
2344       esac
2345       ;;
2346     i686-*-* | i786-*-*)
2347       case ${target_noncanonical} in
2348         k8-*|opteron-*|athlon_64-*)
2349           with_cpu=k8
2350           ;;
2351         athlon_xp-*|athlon_mp-*|athlon_4-*)
2352           with_cpu=athlon-4
2353           ;;
2354         athlon_tbird-*|athlon-*)
2355           with_cpu=athlon
2356           ;;
2357         pentium2-*)
2358           with_cpu=pentium2
2359           ;;
2360         pentium3-*|pentium3m-*)
2361           with_cpu=pentium3
2362           ;;
2363         pentium4-*|pentium4m-*)
2364           with_cpu=pentium4
2365           ;;
2366         prescott-*)
2367           with_cpu=prescott
2368           ;;
2369         nocona-*)
2370           with_cpu=nocona
2371           ;;
2372         pentium_m-*)
2373           with_cpu=pentium-m
2374           ;;
2375         *)
2376           with_cpu=pentiumpro
2377           ;;
2378       esac
2379       ;;
2380     x86_64-*-*)
2381       with_cpu=k8
2382       ;;
2383     alphaev6[78]*-*-*)
2384       with_cpu=ev67
2385       ;;
2386     alphaev6*-*-*)
2387       with_cpu=ev6
2388       ;;
2389     alphapca56*-*-*)
2390       with_cpu=pca56
2391       ;;
2392     alphaev56*-*-*)
2393       with_cpu=ev56
2394       ;;
2395     alphaev5*-*-*)
2396       with_cpu=ev5
2397       ;;
2398     frv-*-*linux* | frv400-*-*linux*)
2399       with_cpu=fr400
2400       ;;
2401     frv550-*-*linux*)
2402       with_cpu=fr550
2403       ;;
2404     sparc*-*-*)
2405       with_cpu="`echo ${target} | sed 's/-.*$//'`"
2406       if [ x$with_cpu = xsparc64 ]; then
2407         with_cpu=v9
2408       fi
2409       ;;
2410   esac
2411 fi
2412
2413 # Similarly for --with-float
2414 if test x$with_float = x; then
2415         case ${target} in
2416         ep9312-*-*)
2417                 with_float=hard
2418                 ;;
2419         esac
2420 fi
2421
2422 # Similarly for --with-schedule.
2423 if test x$with_schedule = x; then
2424         case ${target} in
2425         hppa1* | parisc1*)
2426                 # Override default PA8000 scheduling model.
2427                 with_schedule=7100LC
2428                 ;;
2429         esac
2430 fi
2431
2432 # Validate and mark as valid any --with options supported
2433 # by this target.  In order to use a particular --with option
2434 # you must list it in supported_defaults; validating the value
2435 # is optional.  This case statement should set nothing besides
2436 # supported_defaults.
2437
2438 supported_defaults=
2439 case "${target}" in
2440         alpha*-*-*)
2441                 supported_defaults="cpu tune"
2442                 for which in cpu tune; do
2443                         eval "val=\$with_$which"
2444                         case "$val" in
2445                         "" \
2446                         | ev4 | ev45 | 21064 | ev5 | 21164 | ev56 | 21164a \
2447                         | pca56 | 21164PC | 21164pc | ev6 | 21264 | ev67 \
2448                         | 21264a)
2449                                 ;;
2450                         *)
2451                                 echo "Unknown CPU used in --with-$which=$val" 1>&2
2452                                 exit 1
2453                                 ;;
2454                         esac
2455                 done
2456                 ;;
2457
2458         arm*-*-*)
2459                 supported_defaults="arch cpu float tune fpu abi"
2460                 for which in cpu tune; do
2461                         # See if it matches any of the entries in arm-cores.def
2462                         eval "val=\$with_$which"
2463                         if [ x"$val" = x ] \
2464                             || grep "^ARM_CORE(\"$val\"," \
2465                                     ${srcdir}/config/arm/arm-cores.def \
2466                                     > /dev/null; then
2467                           # Ok
2468                           new_val=`grep "^ARM_CORE(\"$val\"," \
2469                                 ${srcdir}/config/arm/arm-cores.def | \
2470                                 sed -e 's/^[^,]*,[      ]*//' | \
2471                                 sed -e 's/,.*$//'`
2472                           eval "target_${which}_cname=$new_val"
2473                         echo "For $val real value is $new_val"
2474                           true
2475                         else
2476                           echo "Unknown CPU used in --with-$which=$val" 1>&2
2477                           exit 1
2478                         fi
2479                 done
2480
2481                 case "$with_arch" in
2482                 "" \
2483                 | armv[23456] | armv2a | armv3m | armv4t | armv5t \
2484                 | armv5te | armv6j |armv6k | armv6z | armv6zk \
2485                 | iwmmxt | ep9312)
2486                         # OK
2487                         ;;
2488                 *)
2489                         echo "Unknown arch used in --with-arch=$with_arch" 1>&2
2490                         exit 1
2491                         ;;
2492                 esac
2493
2494                 case "$with_float" in
2495                 "" \
2496                 | soft | hard | softfp)
2497                         # OK
2498                         ;;
2499                 *)
2500                         echo "Unknown floating point type used in --with-float=$with_float" 1>&2
2501                         exit 1
2502                         ;;
2503                 esac
2504
2505                 case "$with_fpu" in
2506                 "" \
2507                 | fpa | fpe2 | fpe3 | maverick | vfp )
2508                         # OK
2509                         ;;
2510                 *)
2511                         echo "Unknown fpu used in --with-fpu=$with_fpu" 2>&1
2512                         exit 1
2513                         ;;
2514                 esac
2515
2516                 case "$with_abi" in
2517                 "" \
2518                 | apcs-gnu | atpcs | aapcs | iwmmxt )
2519                         #OK
2520                         ;;
2521                 *)
2522                         echo "Unknown ABI used in --with-abi=$with_abi"
2523                         exit 1
2524                         ;;
2525                 esac
2526
2527                 if test "x$with_arch" != x && test "x$with_cpu" != x; then
2528                         echo "Warning: --with-arch overrides --with-cpu=$with_cpu" 1>&2
2529                 fi
2530                 ;;
2531
2532         fr*-*-*linux*)
2533                 supported_defaults=cpu
2534                 case "$with_cpu" in
2535                 fr400) ;;
2536                 fr550) ;;
2537                 *)
2538                         echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
2539                         exit 1
2540                         ;;
2541                 esac
2542                 ;;
2543
2544         m68k*-linux*)
2545                 supported_defaults="cpu"
2546                 case "$with_cpu" in
2547                 "" | "m68020" | "m68030" | "m68040" | "m68060" | "m68020-40" | "m68020-60")
2548                         # OK
2549                         ;;
2550                 *)
2551                         echo "Unknown CPU used in --with-cpu=$with_cpu, known values:"  1>&2
2552                         echo "m68020 m68030 m68040 m68060 m68020-40 m68020-60" 1>&2
2553                         exit 1
2554                         ;;
2555                 esac
2556                 ;;
2557
2558         hppa*-*-* | parisc*-*-*)
2559                 supported_defaults="arch schedule"
2560
2561                 case "$with_arch" in
2562                 "" | 1.0 | 1.1 | 2.0)
2563                         # OK
2564                         ;;
2565                 *)
2566                         echo "Unknown architecture used in --with-arch=$with_arch" 1>&2
2567                         exit 1
2568                         ;;
2569                 esac
2570
2571                 case "$with_schedule" in
2572                 "" | 700 | 7100 | 7100LC | 7200 | 7300 | 8000)
2573                         # OK
2574                         ;;
2575                 *)
2576                         echo "Unknown processor used in --with-schedule=$with_schedule." 1>&2
2577                         exit 1
2578                         ;;
2579                 esac
2580                 ;;
2581
2582         i[34567]86-*-* | x86_64-*-*)
2583                 supported_defaults="arch cpu tune"
2584                 for which in arch cpu tune; do
2585                         eval "val=\$with_$which"
2586                         case ${val} in
2587                         "" | i386 | i486 \
2588                         | i586 | pentium | pentium-mmx | winchip-c6 | winchip2 \
2589                         | c3 | c3-2 | i686 | pentiumpro | pentium2 | pentium3 \
2590                         | pentium4 | k6 | k6-2 | k6-3 | athlon | athlon-tbird \
2591                         | athlon-4 | athlon-xp | athlon-mp | k8 | opteron \
2592                         | athlon64 | athlon-fx | prescott | pentium-m \
2593                         | pentium4m | pentium3m| nocona)
2594                                 # OK
2595                                 ;;
2596                         *)
2597                                 echo "Unknown CPU given in --with-$which=$val." 1>&2
2598                                 exit 1
2599                                 ;;
2600                         esac
2601                 done
2602                 ;;
2603
2604         mips*-*-*)
2605                 supported_defaults="abi arch float tune divide"
2606
2607                 case ${with_float} in
2608                 "" | soft | hard)
2609                         # OK
2610                         ;;
2611                 *)
2612                         echo "Unknown floating point type used in --with-float=$with_float" 1>&2
2613                         exit 1
2614                         ;;
2615                 esac
2616
2617                 case ${with_abi} in
2618                 "" | 32 | o64 | n32 | 64 | eabi)
2619                         # OK
2620                         ;;
2621                 *)
2622                         echo "Unknown ABI used in --with-abi=$with_abi" 1>&2
2623                         exit 1
2624                         ;;
2625                 esac
2626
2627                 case ${with_divide} in
2628                 "" | breaks | traps)
2629                         # OK
2630                         ;;
2631                 *)
2632                         echo "Unknown division check type use in --with-divide=$with_divide" 1>&2
2633                         exit 1
2634                 esac
2635                 ;;
2636
2637         powerpc*-*-* | rs6000-*-*)
2638                 supported_defaults="cpu float tune"
2639
2640                 for which in cpu tune; do
2641                         eval "val=\$with_$which"
2642                         case ${val} in
2643                         default32 | default64)
2644                                 with_which="with_$which"
2645                                 eval $with_which=
2646                                 ;;
2647                         405cr)
2648                                 tm_defines="${tm_defines} CONFIG_PPC405CR"
2649                                 eval "with_$which=405"
2650                                 ;;
2651                         "" | common \
2652                         | power | power[2345] | powerpc | powerpc64 \
2653                         | rios | rios1 | rios2 | rsc | rsc1 | rs64a \
2654                         | 401 | 403 | 405 | 405fp | 440 | 440fp | 505 \
2655                         | 601 | 602 | 603 | 603e | ec603e | 604 \
2656                         | 604e | 620 | 630 | 740 | 750 | 7400 | 7450 \
2657                         | 854[08] | 801 | 821 | 823 | 860 | 970 | G3 | G4 | G5)
2658                                 # OK
2659                                 ;;
2660                         *)
2661                                 echo "Unknown cpu used in --with-$which=$val." 1>&2
2662                                 exit 1
2663                                 ;;
2664                         esac
2665                 done
2666                 ;;
2667
2668         s390*-*-*)
2669                 supported_defaults="arch mode tune"
2670
2671                 for which in arch tune; do
2672                         eval "val=\$with_$which"
2673                         case ${val} in
2674                         "" | g5 | g6 | z900 | z990 | z9-109)
2675                                 # OK
2676                                 ;;
2677                         *)
2678                                 echo "Unknown cpu used in --with-$which=$val." 1>&2
2679                                 exit 1
2680                                 ;;
2681                         esac
2682                 done
2683
2684                 case ${with_mode} in
2685                 "" | esa | zarch)
2686                         # OK
2687                         ;;
2688                 *)
2689                         echo "Unknown architecture mode used in --with-mode=$with_mode." 1>&2
2690                         exit 1
2691                         ;;
2692                 esac
2693                 ;;
2694
2695         sh[123456ble]-*-* | sh-*-*)
2696                 supported_defaults="cpu"
2697                 case "`echo $with_cpu | tr A-Z_ a-z- | sed s/sh/m/`" in
2698                 "" | m1 | m2 | m2e | m3 | m3e | m4 | m4-single | m4-single-only | m4-nofpu )
2699                         # OK
2700                         ;;
2701                 m2a | m2a-single | m2a-single-only | m2a-nofpu)
2702                         ;;
2703                 m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al)
2704                         ;;
2705                 *)
2706                         echo "Unknown CPU used in --with-cpu=$with_cpu, known values:"  1>&2
2707                         echo "m1 m2 m2e m3 m3e m4 m4-single m4-single-only m4-nofpu" 1>&2
2708                         echo "m4a m4a-single m4a-single-only m4a-nofpu m4al" 1>&2
2709                         echo "m2a m2a-single m2a-single-only m2a-nofpu" 1>&2
2710                         exit 1
2711                         ;;
2712                 esac
2713                 ;;
2714         sparc*-*-*)
2715                 supported_defaults="cpu float tune"
2716
2717                 for which in cpu tune; do
2718                         eval "val=\$with_$which"
2719                         case ${val} in
2720                         "" | sparc | sparcv9 | sparc64 | sparc86x \
2721                         | v7 | cypress | v8 | supersparc | sparclite | f930 \
2722                         | f934 | hypersparc | sparclite86x | sparclet | tsc701 \
2723                         | v9 | ultrasparc | ultrasparc3)
2724                                 # OK
2725                                 ;;
2726                         *)
2727                                 echo "Unknown cpu used in --with-$which=$val" 1>&2
2728                                 exit 1
2729                                 ;;
2730                         esac
2731                 done
2732
2733                 case ${with_float} in
2734                 "" | soft | hard)
2735                         # OK
2736                         ;;
2737                 *)
2738                         echo "Unknown floating point type used in --with-float=$with_float" 1>&2
2739                         exit 1
2740                         ;;
2741                 esac
2742                 ;;
2743
2744         v850*-*-*)
2745                 supported_defaults=cpu
2746                 case ${with_cpu} in
2747                 "" | v850e | v850e1)
2748                         # OK
2749                         ;;
2750                 *)
2751                         echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
2752                         exit 1
2753                         ;;
2754                 esac
2755                 ;;
2756 esac
2757
2758 # Set some miscellaneous flags for particular targets.
2759 target_cpu_default2=
2760 case ${target} in
2761         alpha*-*-*)
2762                 if test x$gas = xyes
2763                 then
2764                         target_cpu_default2="MASK_GAS"
2765                 fi
2766                 ;;
2767
2768         arm*-*-*)
2769                 if test x$target_cpu_cname = x
2770                 then
2771                         target_cpu_default2=TARGET_CPU_generic
2772                 else
2773                         target_cpu_default2=TARGET_CPU_$target_cpu_cname
2774                 fi
2775                 ;;
2776
2777         m68k*-linux*)
2778                 case "x$with_cpu" in
2779                 x)
2780                         # The most generic
2781                         target_cpu_default2="(MASK_68020|MASK_68881|MASK_BITFIELD)"
2782                         ;;
2783                 xm68020)
2784                         target_cpu_default2="(MASK_68020|MASK_68881|MASK_BITFIELD)"
2785                         ;;
2786                 xm68030)
2787                         target_cpu_default2="(MASK_68030|MASK_68020|MASK_68881|MASK_BITFIELD)"
2788                         ;;
2789                 xm68040)
2790                         target_cpu_default2="(MASK_68040|MASK_68040_ONLY|MASK_68020|MASK_68881|MASK_BITFIELD)"
2791                         ;;
2792                 xm68060)
2793                         target_cpu_default2="(MASK_68060|MASK_68040_ONLY|MASK_68020|MASK_68881|MASK_BITFIELD)"
2794                         ;;
2795                 xm68020-40)
2796                         target_cpu_default2="(MASK_BITFIELD|MASK_68881|MASK_68020|MASK_68040)"
2797                         ;;
2798                 xm68020-60)
2799                         target_cpu_default2="(MASK_BITFIELD|MASK_68881|MASK_68020|MASK_68040|MASK_68060)"
2800                         ;;
2801                 *)
2802                         echo "Unknown CPU used in --with-cpu=$with_cpu"  1>&2
2803                         exit 1
2804                         ;;
2805                 esac
2806                 ;;
2807
2808         hppa*-*-* | parisc*-*-*)
2809                 target_cpu_default2="MASK_BIG_SWITCH"
2810                 if test x$gas = xyes
2811                 then
2812                         target_cpu_default2="${target_cpu_default2}|MASK_GAS|MASK_JUMP_IN_DELAY"
2813                 fi
2814                 ;;
2815
2816         mips*-*-*)
2817                 if test x$gnu_ld = xyes
2818                 then
2819                         target_cpu_default2="MASK_SPLIT_ADDRESSES"
2820                 fi
2821                 case ${target} in
2822                         mips*el-*-*)
2823                                 tm_defines="TARGET_ENDIAN_DEFAULT=0 $tm_defines"
2824                                 ;;
2825                 esac
2826                 if test "x$enable_gofast" = xyes
2827                 then
2828                         tm_defines="US_SOFTWARE_GOFAST $tm_defines"
2829                         tmake_file="mips/t-gofast $tmake_file"
2830                 else
2831                         tmake_file="mips/t-mips $tmake_file"
2832                 fi
2833                 ;;
2834
2835         powerpc*-*-* | rs6000-*-*)
2836                 # FIXME: The PowerPC port uses the value set at compile time,
2837                 # although it's only cosmetic.
2838                 if test "x$with_cpu" != x
2839                 then
2840                         target_cpu_default2="\\\"$with_cpu\\\""
2841                 fi
2842                 out_file=rs6000/rs6000.c
2843                 c_target_objs="${c_target_objs} rs6000-c.o"
2844                 cxx_target_objs="${cxx_target_objs} rs6000-c.o"
2845                 tmake_file="rs6000/t-rs6000 ${tmake_file}"
2846
2847                 if test x$enable_e500_double = xyes
2848                 then
2849                         tm_file="$tm_file rs6000/e500-double.h"
2850                 fi
2851                 ;;
2852
2853         sparc*-*-*)
2854                 # Some standard aliases.
2855                 case x$with_cpu in
2856                 xsparc)
2857                         with_cpu=v7
2858                         ;;
2859                 xsparcv9 | xsparc64)
2860                         with_cpu=v9
2861                         ;;
2862                 esac
2863
2864                 # The SPARC port checks this value at compile-time.
2865                 target_cpu_default2="TARGET_CPU_$with_cpu"
2866                 ;;
2867         v850*-*-*)
2868                 # FIXME: The v850 is "special" in that it does not support
2869                 # runtime CPU selection, only --with-cpu.
2870                 case "x$with_cpu" in
2871                 x)
2872                         ;;
2873                 xv850e)
2874                         target_cpu_default2="TARGET_CPU_$with_cpu"
2875                         ;;
2876                 esac
2877                 ;;
2878 esac
2879
2880 t=
2881 all_defaults="abi cpu arch tune schedule float mode fpu divide"
2882 for option in $all_defaults
2883 do
2884         eval "val=\$with_$option"
2885         if test -n "$val"; then
2886                 case " $supported_defaults " in
2887                 *" $option "*)
2888                         ;;
2889                 *)
2890                         echo "This target does not support --with-$option." 2>&1
2891                         exit 1
2892                         ;;
2893                 esac
2894
2895                 if test "x$t" = x
2896                 then
2897                         t="{ \"$option\", \"$val\" }"
2898                 else
2899                         t="${t}, { \"$option\", \"$val\" }"
2900                 fi
2901         fi
2902 done
2903
2904 if test "x$t" = x
2905 then
2906         configure_default_options="{ { NULL, NULL} }"
2907 else
2908         configure_default_options="{ ${t} }"
2909 fi
2910
2911 if test "$target_cpu_default2" != ""
2912 then
2913         if test "$target_cpu_default" != ""
2914         then
2915                 target_cpu_default="(${target_cpu_default}|${target_cpu_default2})"
2916         else
2917                 target_cpu_default=$target_cpu_default2
2918         fi
2919 fi