1 # GCC target-specific configuration file.
2 # Copyright 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
3 # Free Software Foundation, Inc.
5 #This file is part of GCC.
7 #GCC is free software; you can redistribute it and/or modify it under
8 #the terms of the GNU General Public License as published by the Free
9 #Software Foundation; either version 2, or (at your option) any later
12 #GCC is distributed in the hope that it will be useful, but WITHOUT
13 #ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 #FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
17 #You should have received a copy of the GNU General Public License
18 #along with GCC; see the file COPYING. If not, write to the Free
19 #Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
22 # This is the GCC target-specific configuration file
23 # where a configuration type is mapped to different system-specific
24 # definitions and files. This is invoked by the autoconf-generated
25 # configure script. Putting it in a separate shell file lets us skip
26 # running autoconf when modifying target-specific information.
28 # When you change the cases in the OS or target switches, consider
29 # updating ../libgcc/config.host also.
31 # This file switches on the shell variable ${target}, and also uses the
32 # following shell variables:
34 # with_* Various variables as set by configure.
36 # enable_threads Either the name, yes or no depending on whether
37 # threads support was requested.
39 # default_use_cxa_atexit
40 # The default value for the $enable___cxa_atexit
41 # variable. enable___cxa_atexit needs to be set to
42 # "yes" for the correct operation of C++ destructors
43 # but it relies upon the presence of a non-standard C
44 # library function called __cxa_atexit.
45 # Since not all C libraries provide __cxa_atexit the
46 # default value of $default_use_cxa_atexit is set to
47 # "no" except for targets which are known to be OK.
49 # gas_flag Either yes or no depending on whether GNU as was
52 # gnu_ld_flag Either yes or no depending on whether GNU ld was
55 # This file sets the following shell variables for use by the
56 # autoconf-generated configure script:
58 # cpu_type The name of the cpu, if different from the first
59 # chunk of the canonical target name.
61 # tm_defines List of target macros to define for all compilations.
63 # tm_file A list of target macro files, if different from
64 # "$cpu_type/$cpu_type.h". Usually it's constructed
65 # per target in a way like this:
66 # tm_file="${tm_file} dbxelf.h elfos.h svr4.h ${cpu_type.h}/elf.h"
67 # Note that the preferred order is:
68 # - specific target header "${cpu_type}/${cpu_type.h}"
69 # - generic headers like dbxelf.h elfos.h, etc.
70 # - specializing target headers like ${cpu_type.h}/elf.h
71 # This helps to keep OS specific stuff out of the CPU
72 # defining header ${cpu_type}/${cpu_type.h}.
74 # tm_p_file Location of file with declarations for functions
77 # out_file The name of the machine description C support
78 # file, if different from "$cpu_type/$cpu_type.c".
80 # md_file The name of the machine-description file, if
81 # different from "$cpu_type/$cpu_type.md".
83 # tmake_file A list of machine-description-specific
84 # makefile-fragments, if different from
85 # "$cpu_type/t-$cpu_type".
87 # extra_modes The name of the file containing a list of extra
88 # machine modes, if necessary and different from
89 # "$cpu_type/$cpu_type-modes.def".
91 # extra_objs List of extra objects that should be linked into
92 # the compiler proper (cc1, cc1obj, cc1plus)
93 # depending on target.
95 # extra_gcc_objs List of extra objects that should be linked into
96 # the compiler driver (gcc) depending on target.
98 # extra_headers List of used header files from the directory
101 # extra_passes List of extra executables compiled for this target
102 # machine, used for compiling from source to object.
104 # extra_parts List of extra object files that should be compiled
105 # for this target machine.
107 # extra_programs Like extra_passes, but these are used when linking.
109 # extra_options List of target-dependent .opt files.
111 # c_target_objs List of extra target-dependent objects that be
112 # linked into the C compiler only.
114 # cxx_target_objs List of extra target-dependent objects that be
115 # linked into the C++ compiler only.
117 # target_gtfiles List of extra source files with type information.
119 # xm_defines List of macros to define when compiling for the
122 # xm_file List of files to include when compiling for the
125 # use_collect2 Set to yes or no, depending on whether collect2
128 # target_cpu_default Set to override the default target model.
130 # gdb_needs_out_file_path
131 # Set to yes if gdb needs a dir command with
132 # `dirname $out_file`.
134 # thread_file Set to control which thread package to use.
136 # gas Set to yes or no depending on whether the target
137 # system normally uses GNU as.
139 # need_64bit_hwint Set to yes if HOST_WIDE_INT must be 64 bits wide
140 # for this target. This is true iff this target
141 # supports "long" or "wchar_t" wider than 32 bits.
143 # configure_default_options
144 # Set to an initializer for configure_default_options
145 # in configargs.h, based on --with-cpu et cetera.
147 # use_fixproto Set to "yes" if fixproto should be run normally,
148 # "no" if fixproto should never be run.
150 # The following variables are used in each case-construct to build up the
151 # outgoing variables:
153 # gnu_ld Set to yes or no depending on whether the target
154 # system normally uses GNU ld.
169 # Set this to force installation and use of collect2.
171 # Set this to override the default target model.
173 # Set this if gdb needs a dir command with `dirname $out_file`
174 gdb_needs_out_file_path=
175 # Set this to control which thread package will be used.
177 # Reinitialize these from the flag values every loop pass, since some
178 # configure entries modify them.
180 gnu_ld="$gnu_ld_flag"
181 default_use_cxa_atexit=no
185 # Default to not using fixproto. Targets which need fixproto should
186 # specifically set this to 'yes'.
189 # Don't carry these over build->host->target. Please.
193 # Obsolete configurations.
198 if test "x$enable_obsolete" != xyes; then
199 echo "*** Configuration ${target} is obsolete." >&2
200 echo "*** Specify --enable-obsolete to build it anyway." >&2
201 echo "*** Support will be REMOVED in the next major release of GCC," >&2
202 echo "*** unless a maintainer comes forward." >&2
207 # Unsupported targets list. Do not put an entry in this list unless
208 # it would otherwise be caught by a more permissive pattern. The list
209 # should be in alphabetical order.
211 alpha*-*-linux*libc1* \
212 | i[34567]86-sequent-sysv \
213 | i[34567]86-sequent-sysv[123]* \
214 | i[34567]86-go32-* \
215 | i[34567]86-*-go32* \
216 | m68k-*-linux*aout* \
217 | m68k-*-linux*libc1* \
218 | mips64orion*-*-rtems* \
219 | powerpc-*-linux*libc1* \
220 | sparc-*-linux*aout* \
221 | sparc-*-linux*libc1* \
222 | sparc-hal-solaris2* \
230 echo "*** Configuration ${target} not supported" 1>&2
235 # Set default cpu_type, tm_file, tm_p_file and xm_file so it can be
236 # updated in each machine entry. Also set default extra_headers for some
239 cpu_type=`echo ${target} | sed 's/-.*$//'`
244 tmake_file=m32c/t-m32c
258 extra_headers="mmintrin.h"
270 extra_headers=math-68881.h
274 extra_headers="mmintrin.h"
278 extra_headers="mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
279 pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h
284 extra_headers="mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
285 pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h
290 extra_headers=ia64intrin.h
293 hppa*-*-* | parisc*-*-*)
301 extra_headers=math-68881.h
304 extra_headers=math-68881.h
312 extra_headers="ppc-asm.h altivec.h spe.h"
315 xpowerpc64|xdefault64|x6[23]0|x970|xG5|xpower[3456]|xpower6x|xrs64a)
341 # Note the 'l'; we need to be able to match e.g. "shle" or "shl".
342 sh[123456789lbe]*-*-*)
351 tm_file=${cpu_type}/${cpu_type}.h
352 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-protos.h
354 tm_p_file=${cpu_type}/${cpu_type}-protos.h
357 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-modes.def
359 extra_modes=${cpu_type}/${cpu_type}-modes.def
361 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}.opt
363 extra_options="${extra_options} ${cpu_type}/${cpu_type}.opt"
368 tm_file="i386/biarch64.h ${tm_file}"
372 # On a.out targets, we need to use collect2.
379 # Common parts for widely ported systems.
382 tm_file="${tm_file} darwin.h"
385 tm_file="${tm_file} darwin9.h"
388 tm_file="${tm_file} ${cpu_type}/darwin.h"
389 tm_p_file="${tm_p_file} darwin-protos.h"
390 tmake_file="t-darwin ${cpu_type}/t-darwin t-slibgcc-darwin"
391 target_gtfiles="\$(srcdir)/config/darwin.c"
392 extra_options="${extra_options} darwin.opt"
393 c_target_objs="darwin-c.o"
394 cxx_target_objs="darwin-c.o"
395 extra_objs="darwin.o"
396 extra_gcc_objs="darwin-driver.o"
397 default_use_cxa_atexit=yes
398 case ${enable_threads} in
399 "" | yes | posix) thread_file='posix' ;;
402 *-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*)
403 # This is the place-holder for the generic a.out configuration
404 # of FreeBSD. No actual configuration resides here since
405 # there was only ever a bare-bones ix86 configuration for
406 # a.out and it exists solely in the machine-specific section.
407 # This place-holder must exist to avoid dropping into
408 # the generic ELF configuration of FreeBSD (i.e. it must be
409 # ordered before that section).
412 # This is the generic ELF configuration of FreeBSD. Later
413 # machine-specific sections may refine and add to this
416 # Due to tm_file entry ordering issues that vary between cpu
417 # architectures, we only define fbsd_tm_file to allow the
418 # machine-specific section to dictate the final order of all
419 # entries of tm_file with the minor exception that components
420 # of the tm_file set here will always be of the form:
422 # freebsd<version_number>.h [freebsd-<conf_option>.h ...] freebsd-spec.h freebsd.h
424 # The machine-specific section should not tamper with this
425 # ordering but may order all other entries of tm_file as it
426 # pleases around the provided core setting.
429 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
431 *-*-freebsd3 | *-*-freebsd[3].*)
432 tm_defines="${tm_defines} FBSD_MAJOR=3" ;;
433 *-*-freebsd4 | *-*-freebsd[4].*)
434 tm_defines="${tm_defines} FBSD_MAJOR=4" ;;
435 *-*-freebsd5 | *-*-freebsd[5].*)
436 tm_defines="${tm_defines} FBSD_MAJOR=5" ;;
437 *-*-freebsd6 | *-*-freebsd[6].*)
438 tm_defines="${tm_defines} FBSD_MAJOR=6" ;;
439 *-*-freebsd7 | *-*-freebsd[7].*)
440 tm_defines="${tm_defines} FBSD_MAJOR=7" ;;
441 *-*-freebsd8 | *-*-freebsd[8].*)
442 tm_defines="${tm_defines} FBSD_MAJOR=8" ;;
443 *-*-freebsd9 | *-*-freebsd[9].*)
444 tm_defines="${tm_defines} FBSD_MAJOR=9" ;;
446 echo 'Please update *-*-freebsd* in gcc/config.gcc'
450 tmake_file="t-slibgcc-elf-ver t-freebsd"
451 case ${enable_threads} in
453 fbsd_tm_file="${fbsd_tm_file} freebsd-nthr.h"
457 tmake_file="${tmake_file} t-freebsd-thread"
458 # Before 5.0, FreeBSD can't bind shared libraries to -lc
459 # when "optionally" threaded via weak pthread_* checks.
461 *-*-freebsd[34] | *-*-freebsd[34].*)
462 tmake_file="${tmake_file} t-slibgcc-nolc-override"
467 echo 'Unknown thread configuration for FreeBSD'
471 fbsd_tm_file="${fbsd_tm_file} freebsd-spec.h freebsd.h"
473 *-*-linux*libc1* | *-*-linux*aout*)
474 # Avoid the generic linux case.
476 *-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu)
477 # Must come before *-*-gnu* (because of *-*-linux-gnu* systems).
478 extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
479 extra_options="${extra_options} linux.opt"
482 case ${enable_threads} in
483 "" | yes | posix) thread_file='posix' ;;
485 tmake_file="t-slibgcc-elf-ver t-linux"
488 tm_defines="${tm_defines} UCLIBC_DEFAULT=1"
491 tm_defines="${tm_defines} UCLIBC_DEFAULT=0"
494 # Assume that glibc or uClibc are being used and so __cxa_atexit is provided.
495 default_use_cxa_atexit=yes
498 # On the Hurd, the setup is just about the same on
499 # each different CPU. The specific machines that we
500 # support are matched above and just set $cpu_type.
501 tm_file="${cpu_type}/gnu.h"
502 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
503 # GNU tools are the only tools.
506 # These details are the same as for Linux.
507 # But here we need a little extra magic.
508 tmake_file="t-slibgcc-elf-ver t-linux t-gnu"
511 tm_file="${cpu_type}/${cpu_type}.h alpha/elf.h alpha/linux.h alpha/linux-elf.h gnu.h ${tm_file}"
514 tm_file="${cpu_type}/${cpu_type}.h i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h gnu.h ${tm_file}"
517 # Assume that glibc is being used and so __cxa_atexit is provided.
518 default_use_cxa_atexit=yes
521 tmake_file="t-slibgcc-elf-ver t-libc-ok t-netbsd t-libgcc-pic"
525 # NetBSD 2.0 and later get POSIX threads enabled by default.
526 # Allow them to be explicitly enabled on any other version.
527 case ${enable_threads} in
530 *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
532 tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
538 tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
542 # NetBSD 1.7 and later are set up to use GCC's crtstuff for
543 # ELF configurations. We will clear extra_parts in the
544 # a.out configurations.
546 *-*-netbsd*1.[7-9]* | *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
547 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
551 # NetBSD 2.0 and later provide __cxa_atexit(), which we use by
552 # default (unless overridden by --disable-__cxa_atexit).
554 *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
555 default_use_cxa_atexit=yes
560 tmake_file="t-libc-ok t-openbsd t-libgcc-pic"
561 case ${enable_threads} in
564 tmake_file="${tmake_file} t-openbsd-thread"
568 *-*-openbsd2.*|*-*-openbsd3.[012])
569 tm_defines="${tm_defines} HAS_LIBC_R=1" ;;
573 case ${enable_threads} in
574 yes) thread_file='rtems' ;;
580 extra_options="${extra_options} vxworks.opt"
582 case ${enable_threads} in
584 "" | yes | vxworks) thread_file='vxworks' ;;
585 *) echo 'Unknown thread configuration for VxWorks'; exit 1 ;;
589 # Assume that newlib is being used and so __cxa_atexit is provided.
590 default_use_cxa_atexit=yes
595 # Support site-specific machine types.
597 rest=`echo ${target} | sed -e "s/$cpu_type-//"`
598 tm_file=${cpu_type}/$rest.h
599 if test -f $srcdir/config/${cpu_type}/xm-$rest.h
600 then xm_file=${cpu_type}/xm-$rest.h
602 if test -f $srcdir/config/${cpu_type}/t-$rest
603 then tmake_file=${cpu_type}/t-$rest
608 tm_file="${tm_file} alpha/unicosmk.h"
610 # Don't include t-ieee for now because we don't support that yet
611 # tmake_file="alpha/t-ieee"
612 tmake_file="alpha/t-unicosmk"
616 tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h"
617 target_cpu_default="MASK_GAS"
618 tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee alpha/t-linux"
621 target_cpu_default="MASK_GAS"
622 tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
625 tm_file="${tm_file} ${fbsd_tm_file} alpha/elf.h alpha/freebsd.h"
626 target_cpu_default="MASK_GAS"
627 tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
628 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
631 tm_file="${tm_file} netbsd.h alpha/elf.h netbsd-elf.h alpha/netbsd.h"
632 target_cpu_default="MASK_GAS"
633 tmake_file="${tmake_file} alpha/t-alpha alpha/t-ieee"
636 tm_defines="${tm_defines} OBSD_NO_DYNAMIC_LIBRARIES OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_FUNCTION_SIZE OBSD_HAS_DECLARE_OBJECT"
637 tm_file="alpha/alpha.h openbsd.h alpha/openbsd.h"
638 # default x-alpha is only appropriate for dec-osf.
639 target_cpu_default="MASK_GAS"
640 tmake_file="alpha/t-alpha alpha/t-ieee"
643 if test x$stabs = xyes
645 tm_file="${tm_file} dbx.h"
647 if test x$gas != xyes
649 extra_passes="mips-tfile mips-tdump"
652 tmake_file="alpha/t-alpha alpha/t-ieee alpha/t-crtfm alpha/t-osf4"
653 tm_file="${tm_file} alpha/osf.h"
654 extra_headers=va_list.h
657 # Define TARGET_SUPPORT_ARCH except on 4.0a.
660 *) tm_defines="${tm_defines} TARGET_SUPPORT_ARCH=1"
664 tm_file="${tm_file} alpha/osf5.h"
665 tm_defines="${tm_defines} TARGET_SUPPORT_ARCH=1"
668 case ${enable_threads} in
671 tmake_file="${tmake_file} alpha/t-osf-pthread"
676 tm_file="${tm_file} alpha/vms.h alpha/vms64.h"
677 xm_file="alpha/xm-vms.h"
678 tmake_file="alpha/t-alpha alpha/t-vms alpha/t-vms64 alpha/t-ieee"
683 tm_file="${tm_file} alpha/vms.h"
684 xm_file=alpha/xm-vms.h
685 tmake_file="alpha/t-alpha alpha/t-vms alpha/t-ieee"
690 tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
691 extra_parts="crtinit.o crtfini.o"
694 arm-*-coff* | armel-*-coff*)
695 tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h"
696 tmake_file="arm/t-arm arm/t-arm-coff"
698 arm-semi-aof | armel-semi-aof)
699 tm_file="arm/semiaof.h arm/aof.h arm/arm.h"
700 tmake_file="arm/t-arm arm/t-semi"
703 tm_file="elfos.h svr4.h arm/elf.h arm/aout.h ${tm_file} vx-common.h vxworks.h arm/vxworks.h"
704 tmake_file="${tmake_file} arm/t-arm arm/t-vxworks"
706 arm*-*-freebsd*|strongarm*-*-freebsd*)
707 tm_file="dbxelf.h elfos.h ${fbsd_tm_file} arm/elf.h arm/aout.h arm/freebsd.h arm/arm.h"
708 tmake_file="${tmake_file} arm/t-arm arm/t-strongarm-elf"
711 tm_file="dbxelf.h elfos.h netbsd.h netbsd-elf.h arm/elf.h arm/aout.h arm/arm.h arm/netbsd-elf.h"
712 tmake_file="${tmake_file} arm/t-arm arm/t-netbsd"
715 tm_file="arm/aout.h arm/arm.h netbsd.h netbsd-aout.h arm/netbsd.h"
716 tmake_file="t-netbsd arm/t-arm arm/t-netbsd"
720 arm*-*-linux*) # ARM GNU/Linux with ELF
721 tm_file="dbxelf.h elfos.h linux.h arm/elf.h arm/linux-gas.h arm/linux-elf.h"
722 tmake_file="${tmake_file} t-linux arm/t-arm"
725 tm_file="$tm_file arm/bpabi.h arm/linux-eabi.h"
726 tmake_file="$tmake_file arm/t-arm-elf arm/t-bpabi arm/t-linux-eabi"
727 # The BPABI long long divmod functions return a 128-bit value in
728 # registers r0-r3. Correctly modeling that requires the use of
731 # The EABI requires the use of __cxa_atexit.
732 default_use_cxa_atexit=yes
735 tmake_file="$tmake_file arm/t-linux"
738 tm_file="$tm_file arm/aout.h arm/arm.h"
740 arm*-*-uclinux*) # ARM ucLinux
741 tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/linux-gas.h arm/uclinux-elf.h arm/uclinux-elf.h"
742 tmake_file="arm/t-arm arm/t-arm-elf"
744 arm*-*-uclinux-*eabi)
745 tm_file="$tm_file arm/bpabi.h arm/uclinux-eabi.h"
746 tmake_file="$tmake_file arm/t-bpabi"
747 # The BPABI long long divmod functions return a 128-bit value in
748 # registers r0-r3. Correctly modeling that requires the use of
751 # The EABI requires the use of __cxa_atexit.
752 default_use_cxa_atexit=yes
754 tm_file="$tm_file arm/aout.h arm/arm.h"
757 tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/ecos-elf.h"
758 tmake_file="arm/t-arm arm/t-arm-elf"
760 arm*-*-eabi* | arm*-*-symbianelf* )
761 # The BPABI long long divmod functions return a 128-bit value in
762 # registers r0-r3. Correctly modeling that requires the use of
765 default_use_cxa_atexit=yes
766 tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/bpabi.h"
767 tmake_file="arm/t-arm arm/t-arm-elf"
770 tmake_file="${tmake_file} arm/t-bpabi"
773 tm_file="${tm_file} arm/symbian.h"
774 # We do not include t-bpabi for Symbian OS because the system
775 # provides its own implementation of the BPABI functions.
776 tmake_file="${tmake_file} arm/t-symbian"
779 tm_file="${tm_file} arm/aout.h arm/arm.h"
782 tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/rtems-elf.h rtems.h"
783 tmake_file="arm/t-arm arm/t-arm-elf t-rtems arm/t-rtems"
785 arm*-*-elf | ep9312-*-elf)
786 tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
787 tmake_file="arm/t-arm arm/t-arm-elf"
790 tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h arm/wince-pe.h"
791 tmake_file="arm/t-arm arm/t-wince-pe"
792 extra_options="${extra_options} arm/pe.opt"
796 tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h"
797 tmake_file="arm/t-arm arm/t-pe"
798 extra_options="${extra_options} arm/pe.opt"
802 tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h kaos.h arm/kaos-arm.h"
803 tmake_file="arm/t-arm arm/t-arm-elf"
806 tm_file="avr/avr.h dbxelf.h avr/rtems.h rtems.h"
807 tmake_file="avr/t-avr t-rtems avr/t-rtems"
810 tm_file="avr/avr.h dbxelf.h"
814 tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h"
815 tmake_file=bfin/t-bfin-elf
819 tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h bfin/uclinux.h"
820 tmake_file=bfin/t-bfin-uclinux
824 tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h linux.h bfin/linux.h"
825 tmake_file="t-slibgcc-elf-ver bfin/t-bfin-linux"
829 tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h bfin/rtems.h rtems.h"
830 tmake_file="bfin/t-bfin t-rtems bfin/t-rtems"
833 tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h"
834 tmake_file=bfin/t-bfin
837 c4x-*-rtems* | tic4x-*-rtems*)
838 tmake_file="c4x/t-c4x t-rtems c4x/t-rtems"
839 tm_file="c4x/c4x.h c4x/rtems.h rtems.h"
840 c_target_objs="c4x-c.o"
841 cxx_target_objs="c4x-c.o"
845 c_target_objs="c4x-c.o"
846 cxx_target_objs="c4x-c.o"
849 tm_file="dbxelf.h ${tm_file} cris/aout.h"
851 tmake_file="cris/t-cris cris/t-aout"
852 extra_options="${extra_options} cris/aout.opt"
854 cris-*-elf | cris-*-none)
855 tm_file="dbxelf.h elfos.h ${tm_file}"
856 tmake_file="cris/t-cris cris/t-elfmulti"
858 extra_options="${extra_options} cris/elf.opt"
861 tm_file="dbxelf.h elfos.h svr4.h ${tm_file} linux.h cris/linux.h"
862 # We need to avoid using t-linux, so override default tmake_file
863 tmake_file="cris/t-cris t-slibgcc-elf-ver cris/t-linux"
864 extra_options="${extra_options} cris/linux.opt"
867 tm_file="elfos.h ${tm_file}"
868 extra_parts="crtbegin.o crtend.o"
872 tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
873 tmake_file=fr30/t-fr30
874 extra_parts="crti.o crtn.o crtbegin.o crtend.o"
878 tm_file="dbxelf.h elfos.h svr4.h ${tm_file} frv/frv-abi.h"
883 tm_file="dbxelf.h elfos.h svr4.h ${tm_file} \
884 linux.h frv/linux.h frv/frv-abi.h"
885 tmake_file="${tmake_file} frv/t-frv frv/t-linux"
888 tmake_file="h8300/t-h8300 t-rtems h8300/t-rtems"
889 tm_file="h8300/h8300.h dbxcoff.h h8300/coff.h h8300/rtems.h rtems.h"
892 tmake_file="h8300/t-h8300 h8300/t-elf t-rtems h8300/t-rtems"
893 tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h h8300/rtems.h rtems.h"
896 tmake_file="h8300/t-h8300 h8300/t-elf"
897 tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h"
901 tm_file="h8300/h8300.h dbxcoff.h h8300/coff.h"
904 hppa*64*-*-linux* | parisc*64*-*-linux*)
905 target_cpu_default="MASK_PA_11|MASK_PA_20"
906 tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h svr4.h linux.h \
907 pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h pa/pa64-linux.h"
908 tmake_file="${tmake_file} pa/t-linux64"
912 hppa*-*-linux* | parisc*-*-linux*)
913 target_cpu_default="MASK_PA_11|MASK_NO_SPACE_REGS"
914 tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h pa/pa-linux.h \
915 pa/pa32-regs.h pa/pa32-linux.h"
916 tmake_file="${tmake_file} pa/t-linux"
917 # Set the libgcc version number
918 if test x$sjlj = x1; then
919 tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
921 tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
924 # port not yet contributed.
926 # target_cpu_default="MASK_PA_11"
929 target_cpu_default="MASK_PORTABLE_RUNTIME|MASK_NO_SPACE_REGS|MASK_SOFT_FLOAT"
930 tm_file="${tm_file} pa/pa32-regs.h dbxelf.h elfos.h pa/elf.h \
931 pa/pa-pro-end.h libgloss.h"
932 tmake_file="pa/t-pro"
935 target_cpu_default="MASK_PA_11"
936 tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h pa/pa-osf.h"
941 target_cpu_default="MASK_PA_11"
942 tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h"
948 hppa1.1-*-* | hppa2*-*-*)
949 target_cpu_default="MASK_PA_11"
952 tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
953 pa/pa-hpux.h pa/pa-hpux10.h"
954 extra_options="${extra_options} pa/pa-hpux.opt"
957 tm_file="${tm_file} pa/pa-hpux1010.h"
958 extra_options="${extra_options} pa/pa-hpux1010.opt"
961 tmake_file="pa/t-pa-hpux10 pa/t-pa-hpux pa/t-hpux-shlib"
962 case ${enable_threads} in
964 if test x$have_pthread_h = xyes ; then
965 tmake_file="${tmake_file} pa/t-dce-thr"
969 tmake_file="${tmake_file} pa/t-dce-thr"
972 # Set the libgcc version number
973 if test x$sjlj = x1; then
974 tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
976 tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
983 target_cpu_default="MASK_PA_11|MASK_PA_20"
984 if test x$gnu_ld = xyes
986 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
988 tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h \
989 pa/pa64-regs.h pa/pa-hpux.h pa/pa-hpux1010.h \
993 tm_file="${tm_file} pa/pa-hpux1111.h pa/pa-64.h pa/pa64-hpux.h"
994 extra_options="${extra_options} pa/pa-hpux1111.opt"
997 tm_file="${tm_file} pa/pa-64.h pa/pa64-hpux.h"
1000 extra_options="${extra_options} pa/pa-hpux.opt \
1001 pa/pa-hpux1010.opt pa/pa64-hpux.opt"
1002 need_64bit_hwint=yes
1003 tmake_file="pa/t-pa64 pa/t-pa-hpux pa/t-hpux-shlib"
1004 # Set the libgcc version number
1005 if test x$sjlj = x1; then
1006 tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
1008 tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
1010 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o \
1012 case x${enable_threads} in
1019 hppa[12]*-*-hpux11*)
1021 hppa1.1-*-* | hppa2*-*-*)
1022 target_cpu_default="MASK_PA_11"
1025 tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
1026 pa/pa-hpux.h pa/pa-hpux1010.h pa/pa-hpux11.h"
1027 extra_options="${extra_options} pa/pa-hpux.opt pa/pa-hpux1010.opt"
1030 tm_file="${tm_file} pa/pa-hpux1111.h"
1031 extra_options="${extra_options} pa/pa-hpux1111.opt"
1034 tmake_file="pa/t-pa-hpux11 pa/t-pa-hpux pa/t-hpux-shlib"
1035 # Set the libgcc version number
1036 if test x$sjlj = x1; then
1037 tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
1039 tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
1041 case x${enable_threads} in
1049 i[34567]86-*-darwin*)
1050 need_64bit_hwint=yes
1052 # This is so that '.../configure && make' doesn't fail due to
1053 # config.guess deciding that the configuration is i386-*-darwin* and
1054 # then this file using that to set --with-cpu=i386 which has no -m64
1056 with_cpu=${with_cpu:-generic}
1057 tmake_file="${tmake_file} i386/t-fprules-softfp64 soft-fp/t-softfp i386/t-crtpc i386/t-crtfm"
1060 with_cpu=${with_cpu:-generic}
1061 tmake_file="t-darwin ${cpu_type}/t-darwin64 t-slibgcc-darwin i386/t-fprules-softfp64 soft-fp/t-softfp i386/t-crtpc i386/t-crtfm"
1062 tm_file="${tm_file} ${cpu_type}/darwin64.h"
1065 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h"
1066 tmake_file="i386/t-i386elf t-svr4"
1069 i[34567]86-sequent-ptx4* | i[34567]86-sequent-sysv4*)
1070 if test x$gas = xyes
1072 tm_file="${tm_file} usegas.h"
1074 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ptx4.h i386/ptx4-i.h"
1076 extra_parts="crtbegin.o crtend.o"
1080 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h i386/i386-aout.h"
1083 i[34567]86-*-beoself* | i[34567]86-*-beos*)
1084 tmake_file='i386/t-beos i386/t-crtpic'
1085 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/beos-elf.h"
1086 extra_parts='crtbegin.o crtend.o'
1088 i[34567]86-*-freebsd*)
1089 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/freebsd.h"
1092 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/x86-64.h i386/freebsd.h i386/freebsd64.h"
1094 i[34567]86-*-netbsdelf*)
1095 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/netbsd-elf.h"
1097 i[34567]86-*-netbsd*)
1098 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h netbsd.h netbsd-aout.h i386/netbsd.h"
1104 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/x86-64.h i386/netbsd64.h"
1106 i[34567]86-*-openbsd2.*|i[34567]86-*openbsd3.[0123])
1107 tm_file="i386/i386.h i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h openbsd-oldgas.h openbsd.h i386/openbsd.h"
1108 # needed to unconfuse gdb
1109 tmake_file="t-libc-ok t-openbsd i386/t-openbsd"
1110 # we need collect2 until our bug is fixed...
1113 i[34567]86-*-openbsd*)
1114 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h"
1115 tm_file="${tm_file} openbsd.h i386/openbsdelf.h"
1120 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/i386-coff.h"
1123 i[34567]86-*-linux* | i[34567]86-*-kfreebsd*-gnu | i[34567]86-*-knetbsd*-gnu)
1124 # Intel 80386's running GNU/*
1125 # with ELF format using glibc 2
1126 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h"
1128 i[34567]86-*-linux*)
1129 if test x$enable_targets = xall; then
1130 tm_file="${tm_file} i386/x86-64.h i386/linux64.h"
1131 tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1132 tmake_file="${tmake_file} i386/t-linux64 i386/t-fprules-softfp64 soft-fp/t-softfp"
1133 need_64bit_hwint=yes
1134 # FIXME: -m64 for i[34567]86-*-* should be allowed just
1135 # like -m32 for x86_64-*-*.
1136 case X"${with_cpu}" in
1137 Xgeneric|Xcore2|Xnocona|Xx86-64|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx)
1143 echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
1144 echo "generic core2 nocona x86-64 amdfam10 barcelona k8 opteron athlon64 athlon-fx" 1>&2
1149 tm_file="${tm_file} i386/linux.h"
1152 i[34567]86-*-knetbsd*-gnu) tm_file="${tm_file} i386/linux.h knetbsd-gnu.h i386/knetbsd-gnu.h" ;;
1153 i[34567]86-*-kfreebsd*-gnu) tm_file="${tm_file} i386/linux.h kfreebsd-gnu.h i386/kfreebsd-gnu.h" ;;
1155 tmake_file="${tmake_file} i386/t-crtstuff i386/t-crtpc i386/t-crtfm t-dfprules"
1157 x86_64-*-linux* | x86_64-*-kfreebsd*-gnu | x86_64-*-knetbsd*-gnu)
1158 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h \
1159 i386/x86-64.h i386/linux64.h"
1161 x86_64-*-kfreebsd*-gnu) tm_file="${tm_file} kfreebsd-gnu.h" ;;
1162 x86_64-*-knetbsd*-gnu) tm_file="${tm_file} knetbsd-gnu.h" ;;
1164 tmake_file="${tmake_file} i386/t-linux64 i386/t-crtpc i386/t-crtfm i386/t-fprules-softfp64 soft-fp/t-softfp t-dfprules"
1168 i[34567]86-pc-msdosdjgpp*)
1169 xm_file=i386/xm-djgpp.h
1170 tm_file="dbxcoff.h ${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/djgpp.h"
1171 tmake_file=i386/t-djgpp
1172 extra_options="${extra_options} i386/djgpp.opt"
1176 i[34567]86-*-lynxos*)
1178 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/lynx.h lynx.h"
1179 tmake_file="i386/t-crtstuff t-lynx"
1180 extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
1181 extra_options="${extra_options} lynx.opt"
1186 i[3456x]86-*-netware*)
1187 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h tm-dwarf2.h i386/netware.h"
1188 tmake_file=i386/t-netware
1189 extra_objs=netware.o
1192 extra_objs="$extra_objs nwld.o"
1193 tm_file="${tm_file} i386/nwld.h"
1194 tmake_file="${tmake_file} i386/t-nwld"
1195 extra_parts="crt0.o libgcc.def libc.def libcpre.def posixpre.def"
1198 case x${enable_threads} in
1199 x | xyes | xposix) thread_file='posix';;
1200 xnks) thread_file='nks';;
1202 *) echo 'Unknown thread configuration for NetWare' >&2; exit 1;;
1205 i[34567]86-*-nto-qnx*)
1206 tm_file="${tm_file} i386/att.h dbxelf.h tm-dwarf2.h elfos.h svr4.h i386/unix.h i386/nto.h"
1207 tmake_file=i386/t-nto
1211 i[34567]86-*-rtems*)
1212 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/rtemself.h rtems.h"
1213 extra_parts="crtbegin.o crtend.o crti.o crtn.o"
1214 tmake_file="i386/t-rtems-i386 i386/t-crtstuff t-rtems"
1216 i[34567]86-*-sco3.2v5*) # 80386 running SCO Open Server 5
1217 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/sco5.h"
1218 if test x$gas = xyes
1220 tm_file="usegas.h ${tm_file}"
1222 tmake_file=i386/t-sco5
1223 extra_parts="crtbegin.o crtend.o"
1224 extra_options="${extra_options} i386/sco5.opt"
1227 i[34567]86-*-solaris2*)
1228 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h sol2.h"
1230 *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
1231 tm_file="${tm_file} sol2-6.h"
1233 *-*-solaris2.1[0-9]*)
1234 tm_file="${tm_file} sol2-10.h"
1237 tm_file="${tm_file} i386/sol2.h"
1238 tmake_file="t-sol2 i386/t-sol2 t-svr4"
1239 c_target_objs="sol2-c.o"
1240 cxx_target_objs="sol2-c.o"
1242 tm_p_file="${tm_p_file} sol2-protos.h"
1243 if test x$gnu_ld = xyes; then
1244 tmake_file="$tmake_file t-slibgcc-elf-ver"
1245 tm_defines="${tm_defines} TARGET_GNU_LD=1"
1247 tmake_file="$tmake_file t-slibgcc-sld"
1249 if test x$gas = xyes; then
1250 tm_file="usegas.h ${tm_file}"
1253 *-*-solaris2.[789] | *-*-solaris2.1[0-9]*)
1254 tm_file="$tm_file tm-dwarf2.h"
1258 *-*-solaris2.1[0-9]*)
1259 tm_file="${tm_file} i386/x86-64.h i386/sol2-10.h"
1260 tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1261 tmake_file="$tmake_file i386/t-sol2-10"
1262 need_64bit_hwint=yes
1263 # FIXME: -m64 for i[34567]86-*-* should be allowed just
1264 # like -m32 for x86_64-*-*.
1265 case X"${with_cpu}" in
1266 Xgeneric|Xcore2|Xnocona|Xx86-64|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx)
1272 echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
1273 echo "generic core2 nocona x86-64 amdfam10 barcelona k8 opteron athlon64 athlon-fx" 1>&2
1277 # Solaris 2.10 provides crt1.o, crti.o, crtn.o, and gcrt1.o as
1278 # part of the base system.
1279 extra_parts="gmon.o crtbegin.o crtend.o"
1282 extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
1285 case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
1286 "":yes:* | yes:yes:* )
1288 *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
1296 "":*:yes | yes:*:yes )
1301 i[34567]86-*-sysv5*) # Intel x86 on System V Release 5
1302 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv5.h"
1303 if test x$stabs = xyes
1305 tm_file="${tm_file} dbx.h"
1307 tmake_file="i386/t-crtpic t-svr4"
1308 extra_parts="crtbegin.o crtend.o"
1309 if test x$enable_threads = xyes; then
1314 i[34567]86-*-sysv4*) # Intel 80386's running system V.4
1315 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv4-cpp.h"
1316 if test x$stabs = xyes
1318 tm_file="${tm_file} dbx.h"
1320 tmake_file="i386/t-crtpic t-svr4"
1321 extra_parts="crtbegin.o crtend.o"
1324 i[4567]86-wrs-vxworks|i[4567]86-wrs-vxworksae)
1325 tm_file="${tm_file} i386/unix.h i386/att.h elfos.h svr4.h vx-common.h"
1328 tm_file="${tm_file} vxworksae.h i386/vx-common.h i386/vxworksae.h"
1329 tmake_file="${tmake_file} i386/t-vxworks i386/t-vxworksae"
1332 tm_file="${tm_file} vxworks.h i386/vx-common.h i386/vxworks.h"
1333 tmake_file="${tmake_file} i386/t-vxworks"
1337 i[34567]86-*-pe | i[34567]86-*-cygwin*)
1338 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/cygwin.h"
1339 xm_file=i386/xm-cygwin.h
1340 tmake_file="i386/t-cygwin i386/t-cygming"
1341 target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1342 extra_options="${extra_options} i386/cygming.opt"
1343 extra_objs="winnt.o winnt-stubs.o"
1344 c_target_objs=cygwin2.o
1345 cxx_target_objs="cygwin2.o winnt-cxx.o"
1346 extra_gcc_objs=cygwin1.o
1347 if test x$enable_threads = xyes; then
1351 i[34567]86-*-mingw32* | x86_64-*-mingw32*)
1352 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/mingw32.h"
1353 xm_file=i386/xm-mingw32.h
1354 tmake_file="i386/t-cygming i386/t-mingw32"
1355 target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1356 extra_options="${extra_options} i386/cygming.opt"
1357 extra_objs="winnt.o winnt-stubs.o"
1358 cxx_target_objs=winnt-cxx.o
1359 default_use_cxa_atexit=yes
1360 case ${enable_threads} in
1363 tmake_file="${tmake_file} i386/t-gthr-win32"
1368 tm_file="${tm_file} i386/crtdll.h"
1370 *mingw32msv* | *mingw32*)
1375 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygwin.h i386/uwin.h"
1376 tmake_file="i386/t-cygwin i386/t-uwin"
1378 extra_options="${extra_options} i386/cygming.opt"
1379 target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1380 if test x$enable_threads = xyes; then
1385 i[34567]86-*-interix3*)
1386 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/i386-interix.h i386/i386-interix3.h interix.h interix3.h"
1387 tmake_file="i386/t-interix"
1389 target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1390 if test x$enable_threads = xyes ; then
1393 if test x$stabs = xyes ; then
1394 tm_file="${tm_file} dbxcoff.h"
1398 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h kaos.h i386/kaos-i386.h"
1399 tmake_file="i386/t-i386elf t-svr4"
1402 tm_file="${tm_file} dbxelf.h elfos.h ia64/sysv4.h ia64/elf.h"
1403 tmake_file="ia64/t-ia64"
1404 target_cpu_default="0"
1405 if test x$gas = xyes
1407 target_cpu_default="${target_cpu_default}|MASK_GNU_AS"
1409 if test x$gnu_ld = xyes
1411 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
1413 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1417 tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} ia64/sysv4.h ia64/freebsd.h"
1418 target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1419 tmake_file="${tmake_file} ia64/t-ia64"
1420 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1423 tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h ia64/sysv4.h ia64/linux.h"
1424 tmake_file="${tmake_file} ia64/t-ia64 t-libunwind ia64/t-glibc"
1425 if test x$with_system_libunwind != xyes ; then
1426 tmake_file="${tmake_file} t-libunwind-elf ia64/t-glibc-libunwind"
1428 target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1429 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1432 tm_file="${tm_file} dbxelf.h elfos.h svr4.h ia64/sysv4.h ia64/hpux.h"
1433 tmake_file="ia64/t-ia64 ia64/t-hpux"
1434 target_cpu_default="MASK_GNU_AS"
1435 case x$enable_threads in
1441 c_target_objs="ia64-c.o"
1442 cxx_target_objs="ia64-c.o"
1443 extra_options="${extra_options} ia64/ilp32.opt"
1444 # If we decide to run fixproto we should define FIXPROTO_DEFINES
1445 # in ia64/t-hpux, and also fix the definition of putenv in
1446 # sys-protos.h (const char not char).
1449 tm_file="svr4.h elfos.h iq2000/iq2000.h"
1450 tmake_file=iq2000/t-iq2000
1451 out_file=iq2000/iq2000.c
1452 md_file=iq2000/iq2000.md
1456 tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
1457 extra_parts="crtinit.o crtfini.o"
1461 tm_file="dbxelf.h elfos.h svr4.h m32r/little.h ${tm_file}"
1462 extra_parts="crtinit.o crtfini.o m32rx/crtinit.o m32rx/crtfini.o"
1466 tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} m32r/linux.h"
1467 # We override the tmake_file for linux -- why?
1468 tmake_file="t-slibgcc-elf-ver m32r/t-linux"
1471 if test x$enable_threads = xyes; then
1476 tm_file="dbxelf.h elfos.h svr4.h linux.h m32r/little.h ${tm_file} m32r/linux.h"
1477 # We override the tmake_file for linux -- why?
1478 tmake_file="t-slibgcc-elf-ver m32r/t-linux"
1481 if test x$enable_threads = xyes; then
1485 # m68hc11 and m68hc12 share the same machine description.
1486 m68hc11-*-*|m6811-*-*)
1487 tm_file="dbxelf.h elfos.h m68hc11/m68hc11.h"
1488 tm_p_file="m68hc11/m68hc11-protos.h"
1489 md_file="m68hc11/m68hc11.md"
1490 out_file="m68hc11/m68hc11.c"
1491 tmake_file="m68hc11/t-m68hc11-gas"
1494 m68hc12-*-*|m6812-*-*)
1495 tm_file="m68hc11/m68hc12.h dbxelf.h elfos.h m68hc11/m68hc11.h"
1496 tm_p_file="m68hc11/m68hc11-protos.h"
1497 md_file="m68hc11/m68hc11.md"
1498 out_file="m68hc11/m68hc11.c"
1499 tmake_file="m68hc11/t-m68hc11-gas"
1500 extra_options="${extra_options} m68hc11/m68hc11.opt"
1504 default_m68k_cpu=68020
1506 tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-mlibs"
1507 tm_file="${tm_file} m68k/m68k-none.h m68k/m68kemb.h m68k/m68k-aout.h libgloss.h"
1510 default_m68k_cpu=68020
1512 tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-mlibs"
1513 tm_defines="${tm_defines} MOTOROLA=1 USE_GAS"
1514 tm_file="${tm_file} m68k/m68k-none.h m68k/m68kemb.h dbxcoff.h m68k/coff.h dbx.h"
1517 m68020-*-elf* | m68k-*-elf* | fido-*-elf*)
1520 # Check that $with_cpu makes sense.
1525 echo "Cannot accept --with-cpu=$with_cpu"
1532 default_m68k_cpu=68020
1536 tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h"
1537 tm_defines="${tm_defines} MOTOROLA=1 USE_GAS"
1538 tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-m68kelf"
1539 # Add multilibs for targets other than fido.
1544 tmake_file="$tmake_file m68k/t-mlibs"
1547 extra_parts="crtbegin.o crtend.o"
1549 m68010-*-netbsdelf* | m68k*-*-netbsdelf*)
1550 default_m68k_cpu=68020
1552 tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h m68k/netbsd-elf.h"
1553 tm_defines="${tm_defines} MOTOROLA=1 USE_GAS"
1556 default_m68k_cpu=68020
1558 # needed to unconfuse gdb
1559 tm_defines="${tm_defines} OBSD_OLD_GAS"
1560 tm_file="${tm_file} openbsd.h m68k/openbsd.h"
1561 tmake_file="t-libc-ok t-openbsd m68k/t-openbsd"
1562 # we need collect2 until our bug is fixed...
1565 m68k-*-uclinuxoldabi*) # Motorola m68k/ColdFire running uClinux
1566 # with uClibc, using the original
1567 # m68k-elf-based ABI
1568 default_m68k_cpu=68020
1570 tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/uclinux-oldabi.h"
1571 tm_defines="${tm_defines} MOTOROLA=1 USE_GAS"
1572 tmake_file="m68k/t-floatlib m68k/t-uclinux"
1575 m68k-*-uclinux*) # Motorola m68k/ColdFire running uClinux
1576 # with uClibc, using the new GNU/Linux-style
1578 default_m68k_cpu=68020
1580 tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h flat.h m68k/linux.h m68k/uclinux.h ./sysroot-suffix.h"
1581 tm_defines="${tm_defines} MOTOROLA=1 USE_GAS UCLIBC_DEFAULT=1"
1582 extra_options="${extra_options} linux.opt"
1583 tmake_file="m68k/t-floatlib m68k/t-uclinux m68k/t-mlibs"
1586 m68k-*-linux*) # Motorola m68k's running GNU/Linux
1587 # with ELF format using glibc 2
1588 # aka the GNU/Linux C library 6.
1589 default_m68k_cpu=68020
1591 tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h m68k/linux.h"
1592 extra_options="${extra_options} m68k/ieee.opt"
1593 tm_defines="${tm_defines} MOTOROLA=1 USE_GAS"
1594 # if not configured with --enable-sjlj-exceptions, bump the
1595 # libgcc version number
1596 if test x$sjlj != x1; then
1597 tmake_file="$tmake_file m68k/t-slibgcc-elf-ver"
1601 default_m68k_cpu=68020
1603 tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-crtstuff t-rtems m68k/t-rtems m68k/t-mlibs"
1604 tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h"
1605 tm_defines="${tm_defines} MOTOROLA=1 USE_GAS"
1606 extra_parts="crtbegin.o crtend.o"
1609 tm_file="dbxelf.h elfos.h svr4.h ${tm_file} mcore/mcore-elf.h"
1610 tmake_file=mcore/t-mcore
1614 tm_file="svr3.h dbxcoff.h ${tm_file} mcore/mcore-pe.h"
1615 tmake_file=mcore/t-mcore-pe
1619 tm_file="elfos.h ${tm_file} mips/iris.h"
1620 tmake_file="mips/t-iris mips/t-slibgcc-irix"
1621 target_cpu_default="MASK_ABICALLS"
1624 tm_file="${tm_file} mips/iris5.h"
1628 tm_file="${tm_file} mips/iris6.h"
1629 tmake_file="${tmake_file} mips/t-iris6"
1630 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_N32"
1633 if test "x$stabs" = xyes
1635 tm_file="${tm_file} dbx.h mips/dbxmdebug.h"
1637 if test "x$gnu_ld" = xyes
1639 tm_defines="${tm_defines} IRIX_USING_GNU_LD"
1641 # if test x$enable_threads = xyes; then
1642 # thread_file='irix'
1646 mips*-*-netbsd*) # NetBSD/mips, either endian.
1647 target_cpu_default="MASK_ABICALLS"
1648 tm_file="elfos.h ${tm_file} mips/elf.h netbsd.h netbsd-elf.h mips/netbsd.h"
1651 tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h mips/linux64.h"
1652 tmake_file="${tmake_file} mips/t-linux64"
1653 tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_N32"
1657 mips*-*-linux*) # Linux MIPS, either endian.
1658 tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h"
1661 target_cpu_default="MASK_SOFT_FLOAT"
1662 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32"
1667 tm_defines="${tm_defines} OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_OBJECT OBSD_HAS_CORRECT_SPECS"
1668 target_cpu_default="MASK_ABICALLS"
1669 tm_file="mips/mips.h openbsd.h mips/openbsd.h mips/sdb.h"
1672 tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=0";;
1673 *) tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=MASK_BIG_ENDIAN";;
1676 mipsisa32-*-elf* | mipsisa32el-*-elf*)
1677 tm_file="elfos.h ${tm_file} mips/elf.h"
1678 tmake_file=mips/t-isa3264
1679 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32 MIPS_ABI_DEFAULT=ABI_EABI"
1682 mipsisa32r2-*-elf* | mipsisa32r2el-*-elf*)
1683 tm_file="elfos.h ${tm_file} mips/elf.h"
1684 tmake_file=mips/t-isa3264
1685 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33 MIPS_ABI_DEFAULT=ABI_EABI"
1688 mipsisa64-*-elf* | mipsisa64el-*-elf*)
1689 tm_file="elfos.h ${tm_file} mips/elf.h"
1690 tmake_file=mips/t-isa3264
1691 target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1692 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_ABI_DEFAULT=ABI_EABI"
1695 mipsisa64sr71k-*-elf*)
1696 tm_file="elfos.h ${tm_file} mips/elf.h"
1697 tmake_file=mips/t-sr71k
1698 target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1699 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sr71000\\\" MIPS_ABI_DEFAULT=ABI_EABI"
1702 mipsisa64sb1-*-elf* | mipsisa64sb1el-*-elf*)
1703 tm_file="elfos.h ${tm_file} mips/elf.h"
1704 tmake_file="mips/t-elf mips/t-sb1"
1705 target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1706 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sb1\\\" MIPS_ABI_DEFAULT=ABI_O64"
1709 mips-*-elf* | mipsel-*-elf*)
1710 tm_file="elfos.h ${tm_file} mips/elf.h"
1711 tmake_file=mips/t-elf
1714 mips64-*-elf* | mips64el-*-elf*)
1715 tm_file="elfos.h ${tm_file} mips/elf.h"
1716 tmake_file=mips/t-elf
1717 target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1718 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1721 mips64vr-*-elf* | mips64vrel-*-elf*)
1722 tm_file="mips/vr.h elfos.h ${tm_file} mips/elf.h"
1723 tmake_file=mips/t-vr
1726 mips64orion-*-elf* | mips64orionel-*-elf*)
1727 tm_file="elfos.h ${tm_file} mips/elforion.h mips/elf.h"
1728 tmake_file=mips/t-elf
1729 target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1730 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1734 tm_file="elfos.h ${tm_file} mips/elf.h mips/rtems.h rtems.h"
1735 tmake_file="mips/t-elf t-rtems mips/t-rtems"
1738 tm_file="elfos.h ${tm_file} svr4.h mips/elf.h vx-common.h vxworks.h mips/vxworks.h"
1739 tmake_file="${tmake_file} mips/t-vxworks"
1741 mips-wrs-windiss) # Instruction-level simulator for VxWorks.
1743 tm_file="elfos.h mips/mips.h svr4.h mips/elf.h windiss.h mips/windiss.h"
1744 tmake_file="${tmake_file} mips/t-elf"
1747 mipstx39-*-elf* | mipstx39el-*-elf*)
1748 tm_file="elfos.h ${tm_file} mips/r3900.h mips/elf.h"
1749 tmake_file=mips/t-r3900
1752 mmix-knuth-mmixware)
1753 need_64bit_hwint=yes
1756 tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
1757 if test x$stabs = xyes
1759 tm_file="${tm_file} dbx.h"
1765 tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
1766 tmake_file="${tmake_file} mt/t-mt"
1769 echo "GCC does not yet support the ${target} target"; exit 1
1772 tm_file="${tm_file} netbsd.h netbsd-aout.h ns32k/netbsd.h"
1773 # On NetBSD, the headers are already okay, except for math.h.
1774 tmake_file="t-netbsd ns32k/t-ns32k"
1779 tm_file="${tm_file} pdp11/2bsd.h"
1785 # port not yet contributed
1786 #powerpc-*-openbsd*)
1787 # tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-fprules-fpbit "
1791 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1792 test x$with_cpu != x || cpu_is_64bit=yes
1793 test x$cpu_is_64bit != xyes || tm_file="${tm_file} rs6000/default64.h"
1794 tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h"
1795 if test x${enable_secureplt} = xyes; then
1796 tm_file="rs6000/secureplt.h ${tm_file}"
1798 extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt"
1799 tmake_file="t-dfprules rs6000/t-fprules ${tmake_file} rs6000/t-ppccomm rs6000/t-linux64 rs6000/t-fprules-softfp soft-fp/t-softfp"
1802 tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux64.h rs6000/gnu.h"
1803 extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt"
1804 tmake_file="rs6000/t-fprules t-slibgcc-elf-ver t-gnu rs6000/t-linux64 rs6000/t-fprules-softfp soft-fp/t-softfp"
1807 tm_file="${tm_file} rs6000/aix.h rs6000/beos.h rs6000/xcoff.h"
1808 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-beos"
1813 extra_options="${extra_options} rs6000/darwin.opt"
1814 extra_parts="crt2.o"
1816 *-darwin1[0-9]* | *-darwin[8-9]*)
1817 tmake_file="${tmake_file} rs6000/t-darwin8"
1818 tm_file="${tm_file} rs6000/darwin8.h"
1821 tm_file="${tm_file} rs6000/darwin7.h"
1826 extra_headers=altivec.h
1828 powerpc64-*-darwin*)
1829 tm_file="${tm_file} ${cpu_type}/darwin8.h ${cpu_type}/darwin64.h"
1830 extra_options="${extra_options} ${cpu_type}/darwin.opt"
1831 # We're omitting t-darwin8 to avoid building any multilibs
1832 extra_headers=altivec.h
1834 powerpc*-*-freebsd*)
1835 tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} rs6000/sysv4.h rs6000/freebsd.h"
1836 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1837 extra_options="${extra_options} rs6000/sysv4.opt"
1840 tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h freebsd-spec.h rs6000/sysv4.h rs6000/netbsd.h"
1841 tmake_file="${tmake_file} rs6000/t-netbsd"
1842 extra_options="${extra_options} rs6000/sysv4.opt"
1844 powerpc-*-chorusos*)
1845 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h chorus.h"
1846 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos rs6000/t-ppccomm"
1847 extra_options="${extra_options} rs6000/sysv4.opt"
1848 case ${enable_threads} in
1856 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabispe.h"
1857 extra_options="${extra_options} rs6000/sysv4.opt"
1858 tmake_file="rs6000/t-spe rs6000/t-ppccomm"
1860 powerpc-*-eabisimaltivec*)
1861 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h rs6000/eabialtivec.h"
1862 extra_options="${extra_options} rs6000/sysv4.opt"
1863 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcendian rs6000/t-ppccomm"
1866 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h"
1867 extra_options="${extra_options} rs6000/sysv4.opt"
1868 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1871 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1872 extra_options="${extra_options} rs6000/sysv4.opt"
1873 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1876 powerpc-*-eabialtivec*)
1877 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabialtivec.h"
1878 extra_options="${extra_options} rs6000/sysv4.opt"
1879 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcendian rs6000/t-ppccomm"
1882 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h"
1883 extra_options="${extra_options} rs6000/sysv4.opt"
1884 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1887 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/rtems.h rtems.h"
1888 extra_options="${extra_options} rs6000/sysv4.opt"
1889 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-rtems t-rtems rs6000/t-ppccomm"
1891 powerpc-*-linux*altivec*)
1892 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h"
1893 extra_options="${extra_options} rs6000/sysv4.opt"
1894 tmake_file="rs6000/t-fprules rs6000/t-fprules-softfp soft-fp/t-softfp rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1896 powerpc-*-linux*spe*)
1897 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxspe.h rs6000/e500.h"
1898 extra_options="${extra_options} rs6000/sysv4.opt"
1899 tmake_file="rs6000/t-fprules rs6000/t-fprules-softfp soft-fp/t-softfp rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1902 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1903 extra_options="${extra_options} rs6000/sysv4.opt"
1904 tmake_file="t-dfprules rs6000/t-fprules rs6000/t-fprules-softfp soft-fp/t-softfp rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1905 case ${enable_targets}:${cpu_is_64bit} in
1906 *powerpc64* | all:* | *:yes)
1907 if test x$cpu_is_64bit = xyes; then
1908 tm_file="${tm_file} rs6000/default64.h"
1910 tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h"
1911 tmake_file="$tmake_file rs6000/t-linux64"
1912 extra_options="${extra_options} rs6000/linux64.opt"
1915 tm_file="${tm_file} rs6000/linux.h"
1918 if test x${enable_secureplt} = xyes; then
1919 tm_file="rs6000/secureplt.h ${tm_file}"
1922 powerpc-*-gnu-gnualtivec*)
1923 tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h rs6000/gnu.h"
1924 extra_options="${extra_options} rs6000/sysv4.opt"
1925 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm"
1926 if test x$enable_threads = xyes; then
1931 tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/gnu.h"
1932 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm"
1933 extra_options="${extra_options} rs6000/sysv4.opt"
1934 if test x$enable_threads = xyes; then
1938 powerpc-wrs-vxworks|powerpc-wrs-vxworksae)
1939 tm_file="${tm_file} elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1940 tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppccomm rs6000/t-vxworks"
1941 extra_options="${extra_options} rs6000/sysv4.opt"
1942 extra_headers=ppc-asm.h
1945 tm_file="${tm_file} vx-common.h vxworksae.h rs6000/vxworks.h rs6000/e500.h rs6000/vxworksae.h"
1946 tmake_file="${tmake_file} rs6000/t-vxworksae"
1949 tm_file="${tm_file} vx-common.h vxworks.h rs6000/vxworks.h rs6000/e500.h"
1953 powerpc-wrs-windiss*) # Instruction-level simulator for VxWorks.
1954 tm_file="${tm_file} elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/windiss.h"
1955 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1956 extra_options="${extra_options} rs6000/sysv4.opt"
1962 tm_file="${tm_file} dbxelf.h elfos.h rs6000/sysv4.h rs6000/lynx.h lynx.h"
1963 tmake_file="t-lynx rs6000/t-lynx"
1964 extra_options="${extra_options} rs6000/sysv4.opt lynx.opt"
1965 extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
1966 extra_options="${extra_options} lynx.opt"
1972 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h"
1973 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos rs6000/t-ppccomm"
1974 extra_options="${extra_options} rs6000/sysv4.opt"
1978 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h"
1979 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1980 extra_options="${extra_options} rs6000/sysv4.opt"
1983 powerpcle-*-eabisim*)
1984 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h"
1985 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1986 extra_options="${extra_options} rs6000/sysv4.opt"
1989 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/e500.h"
1990 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1991 extra_options="${extra_options} rs6000/sysv4.opt"
1994 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h kaos.h rs6000/kaos-ppc.h"
1995 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1996 extra_options="${extra_options} rs6000/sysv4.opt"
1999 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h kaos.h rs6000/kaos-ppc.h"
2000 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
2001 extra_options="${extra_options} rs6000/sysv4.opt"
2003 rs6000-ibm-aix4.[12]* | powerpc-ibm-aix4.[12]*)
2004 tm_file="${tm_file} rs6000/aix.h rs6000/aix41.h rs6000/xcoff.h"
2005 tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-newas"
2006 extra_options="${extra_options} rs6000/aix41.opt"
2011 rs6000-ibm-aix4.[3456789]* | powerpc-ibm-aix4.[3456789]*)
2012 tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix43.h rs6000/xcoff.h"
2013 tmake_file=rs6000/t-aix43
2014 extra_options="${extra_options} rs6000/aix64.opt"
2019 rs6000-ibm-aix5.1.* | powerpc-ibm-aix5.1.*)
2020 tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix51.h rs6000/xcoff.h"
2021 extra_options="${extra_options} rs6000/aix64.opt"
2022 tmake_file=rs6000/t-aix43
2027 rs6000-ibm-aix[56789].* | powerpc-ibm-aix[56789].*)
2028 tm_file="${tm_file} rs6000/aix.h rs6000/aix52.h rs6000/xcoff.h"
2029 tmake_file=rs6000/t-aix52
2030 extra_options="${extra_options} rs6000/aix64.opt"
2036 tm_file="s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h"
2037 tmake_file="${tmake_file} t-dfprules s390/t-crtstuff s390/t-linux"
2040 tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h"
2041 tm_p_file=s390/s390-protos.h
2042 md_file=s390/s390.md
2043 extra_modes=s390/s390-modes.def
2044 out_file=s390/s390.c
2045 tmake_file="${tmake_file} t-dfprules s390/t-crtstuff s390/t-linux s390/t-linux64"
2048 tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h s390/tpf.h"
2049 tm_p_file=s390/s390-protos.h
2050 md_file=s390/s390.md
2051 extra_modes=s390/s390-modes.def
2052 out_file=s390/s390.c
2053 extra_parts="crtbeginS.o crtendS.o"
2054 tmake_file="s390/t-crtstuff s390/t-tpf"
2056 extra_options="${extra_options} s390/tpf.opt"
2059 tm_file="dbxelf.h elfos.h score/elf.h score/score.h"
2060 tmake_file=score/t-score-elf
2061 extra_objs="score-mdaux.o"
2063 sh-*-elf* | sh[12346l]*-*-elf* | sh*-*-kaos* | \
2064 sh-*-symbianelf* | sh[12346l]*-*-symbianelf* | \
2065 sh-*-linux* | sh[346lbe]*-*-linux* | \
2066 sh-*-netbsdelf* | shl*-*-netbsdelf* | sh5-*-netbsd* | sh5l*-*-netbsd* | \
2067 sh64-*-netbsd* | sh64l*-*-netbsd*)
2068 tmake_file="${tmake_file} sh/t-sh sh/t-elf"
2069 if test x${with_endian} = x; then
2071 sh[1234]*be-*-* | sh[1234]*eb-*-*) with_endian=big ;;
2072 shbe-*-* | sheb-*-*) with_endian=big,little ;;
2073 sh[1234]l* | sh[34]*-*-linux*) with_endian=little ;;
2074 shl* | sh64l* | sh*-*-linux* | \
2075 sh5l* | sh-superh-elf) with_endian=little,big ;;
2076 sh[1234]*-*-*) with_endian=big ;;
2077 *) with_endian=big,little ;;
2080 case ${with_endian} in
2081 big|little) tmake_file="${tmake_file} sh/t-1e" ;;
2082 big,little|little,big) ;;
2083 *) echo "with_endian=${with_endian} not supported."; exit 1 ;;
2085 case ${with_endian} in
2086 little*) tm_file="sh/little.h ${tm_file}" ;;
2088 tm_file="${tm_file} dbxelf.h elfos.h"
2091 *) tm_file="${tm_file} svr4.h" ;;
2093 tm_file="${tm_file} sh/elf.h"
2095 sh*-*-linux*) tmake_file="${tmake_file} sh/t-linux"
2096 tm_file="${tm_file} linux.h sh/linux.h" ;;
2097 sh*-*-kaos*) tm_file="${tm_file} sh/embed-elf.h kaos.h sh/kaos-sh.h"
2099 sh*-*-netbsd*) tm_file="${tm_file} netbsd.h netbsd-elf.h sh/netbsd-elf.h" ;;
2100 sh*-superh-elf) if test x$with_libgloss != xno; then
2102 tm_file="${tm_file} sh/newlib.h"
2104 tm_file="${tm_file} sh/embed-elf.h sh/superh.h"
2105 tmake_file="${tmake_file} sh/t-superh"
2106 extra_options="${extra_options} sh/superh.opt" ;;
2107 *) if test x$with_newlib = xyes \
2108 && test x$with_libgloss = xyes; then
2109 tm_file="${tm_file} sh/newlib.h"
2111 tm_file="${tm_file} sh/embed-elf.h" ;;
2115 # SHmedia, 32-bit ABI
2116 tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd"
2119 # SHmedia, 64-bit ABI
2120 tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd sh/t-netbsd-sh5-64"
2123 tmake_file="${tmake_file} sh/t-netbsd"
2126 tmake_file="${tmake_file} sh/t-sh64 sh/t-linux64"
2127 tm_file="${tm_file} sh/sh64.h"
2128 extra_headers="shmedia.h ushmedia.h sshmedia.h"
2131 tmake_file="${tmake_file} sh/t-sh64"
2132 tm_file="${tm_file} sh/sh64.h"
2133 extra_headers="shmedia.h ushmedia.h sshmedia.h"
2136 tmake_file="sh/t-symbian"
2137 tm_file="sh/symbian-pre.h sh/little.h ${tm_file} sh/symbian-post.h"
2138 extra_objs="symbian.o"
2139 extra_parts="crt1.o crti.o crtn.o crtbegin.o crtend.o crtbeginS.o crtendS.o"
2142 # sed el/eb endian suffixes away to avoid confusion with sh[23]e
2143 case `echo ${target} | sed 's/e[lb]-/-/'` in
2144 sh64*-*-netbsd*) sh_cpu_target=sh5-64media ;;
2145 sh64* | sh5*-*-netbsd*) sh_cpu_target=sh5-32media ;;
2146 sh4a_single_only*) sh_cpu_target=sh4a-single-only ;;
2147 sh4a_single*) sh_cpu_target=sh4a-single ;;
2148 sh4a_nofpu*) sh_cpu_target=sh4a-nofpu ;;
2149 sh4al) sh_cpu_target=sh4al ;;
2150 sh4a*) sh_cpu_target=sh4a ;;
2151 sh4_single_only*) sh_cpu_target=sh4-single-only ;;
2152 sh4_single*) sh_cpu_target=sh4-single ;;
2153 sh4_nofpu*) sh_cpu_target=sh4-nofpu ;;
2154 sh4* | sh-superh-*) sh_cpu_target=sh4 ;;
2155 sh3e*) sh_cpu_target=sh3e ;;
2156 sh*-*-netbsd* | sh3*) sh_cpu_target=sh3 ;;
2157 sh2a_single_only*) sh_cpu_target=sh2a-single-only ;;
2158 sh2a_single*) sh_cpu_target=sh2a-single ;;
2159 sh2a_nofpu*) sh_cpu_target=sh2a-nofpu ;;
2160 sh2a*) sh_cpu_target=sh2a ;;
2161 sh2e*) sh_cpu_target=sh2e ;;
2162 sh2*) sh_cpu_target=sh2 ;;
2163 *) sh_cpu_target=sh1 ;;
2165 # did the user say --without-fp ?
2166 if test x$with_fp = xno; then
2167 case ${sh_cpu_target} in
2168 sh5-*media) sh_cpu_target=${sh_cpu_target}-nofpu ;;
2170 sh4a* ) sh_cpu_target=sh4a-nofpu ;;
2171 sh4*) sh_cpu_target=sh4-nofpu ;;
2172 sh3*) sh_cpu_target=sh3 ;;
2173 sh2a*) sh_cpu_target=sh2a-nofpu ;;
2174 sh2*) sh_cpu_target=sh2 ;;
2175 *) echo --without-fp not available for $target: ignored
2177 tm_defines="$tm_defines STRICT_NOFPU=1"
2179 sh_cpu_default="`echo $with_cpu|sed s/^m/sh/|tr A-Z_ a-z-`"
2180 case $sh_cpu_default in
2181 sh5-64media-nofpu | sh5-64media | \
2182 sh5-32media-nofpu | sh5-32media | sh5-compact-nofpu | sh5-compact | \
2183 sh2a-single-only | sh2a-single | sh2a-nofpu | sh2a | \
2184 sh4a-single-only | sh4a-single | sh4a-nofpu | sh4a | sh4al | \
2185 sh4-single-only | sh4-single | sh4-nofpu | sh4 | sh4-300 | \
2186 sh3e | sh3 | sh2e | sh2 | sh1) ;;
2187 "") sh_cpu_default=${sh_cpu_target} ;;
2188 *) echo "with_cpu=$with_cpu not supported"; exit 1 ;;
2190 sh_multilibs=${with_multilib_list}
2191 if test x${sh_multilibs} = x ; then
2193 sh64-superh-linux* | \
2194 sh[1234]*) sh_multilibs=${sh_cpu_target} ;;
2195 sh64* | sh5*) sh_multilibs=m5-32media,m5-32media-nofpu,m5-compact,m5-compact-nofpu,m5-64media,m5-64media-nofpu ;;
2196 sh-superh-*) sh_multilibs=m4,m4-single,m4-single-only,m4-nofpu ;;
2197 sh*-*-linux*) sh_multilibs=m1,m3e,m4 ;;
2198 sh*-*-netbsd*) sh_multilibs=m3,m3e,m4 ;;
2199 *) sh_multilibs=m1,m2,m2e,m4,m4-single,m4-single-only,m2a,m2a-single ;;
2201 if test x$with_fp = xno; then
2202 sh_multilibs="`echo $sh_multilibs|sed -e s/m4/sh4-nofpu/ -e s/,m4-[^,]*//g -e s/,m[23]e// -e s/m2a,m2a-single/m2a-nofpu/ -e s/m5-..m....,//g`"
2205 target_cpu_default=SELECT_`echo ${sh_cpu_default}|tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`
2206 tm_defines=${tm_defines}' SH_MULTILIB_CPU_DEFAULT=\"'`echo $sh_cpu_default|sed s/sh/m/`'\"'
2207 sh_multilibs=`echo $sh_multilibs,$sh_cpu_default | sed -e 's/[ ,/][ ,]*/ /g' -e 's/ $//' -e 's/^m/sh/' -e 's/ m/ sh/g' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz-`
2208 for sh_multilib in ${sh_multilibs}; do
2209 case ${sh_multilib} in
2210 sh1 | sh2 | sh2e | sh3 | sh3e | \
2211 sh4 | sh4-single | sh4-single-only | sh4-nofpu | sh4-300 |\
2212 sh4a | sh4a-single | sh4a-single-only | sh4a-nofpu | sh4al | \
2213 sh2a | sh2a-single | sh2a-single-only | sh2a-nofpu | \
2214 sh5-64media | sh5-64media-nofpu | \
2215 sh5-32media | sh5-32media-nofpu | \
2216 sh5-compact | sh5-compact-nofpu)
2217 tmake_file="${tmake_file} sh/t-mlib-${sh_multilib}"
2218 tm_defines="$tm_defines SUPPORT_`echo $sh_multilib|tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`=1"
2221 echo "with_multilib_list=${sh_multilib} not supported."
2226 if test x${enable_incomplete_targets} = xyes ; then
2227 tm_defines="$tm_defines SUPPORT_SH1=1 SUPPORT_SH2E=1 SUPPORT_SH4=1 SUPPORT_SH4_SINGLE=1 SUPPORT_SH2A=1 SUPPORT_SH2A_SINGLE=1 SUPPORT_SH5_32MEDIA=1 SUPPORT_SH5_32MEDIA_NOFPU=1 SUPPORT_SH5_64MEDIA=1 SUPPORT_SH5_64MEDIA_NOFPU=1"
2232 tmake_file="sh/t-sh t-rtems sh/t-rtems"
2233 tm_file="${tm_file} dbxcoff.h sh/coff.h sh/rtems.h rtems.h"
2236 tmake_file="sh/t-sh sh/t-elf t-rtems sh/t-rtems"
2237 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h"
2240 tmake_file="$tmake_file sh/t-sh sh/t-elf sh/t-vxworks"
2241 tm_file="${tm_file} elfos.h svr4.h sh/elf.h sh/embed-elf.h vx-common.h vxworks.h sh/vxworks.h"
2244 tm_file="${tm_file} dbxcoff.h sh/coff.h"
2248 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
2249 extra_options="${extra_options} sparc/long-double-switch.opt"
2252 tm_file="sparc/openbsd1-64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h openbsd.h sparc/openbsd64.h"
2253 extra_options="${extra_options} sparc/little-endian.opt"
2258 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp-elf.h"
2259 tmake_file="sparc/t-elf sparc/t-crtfm"
2260 extra_parts="crti.o crtn.o crtbegin.o crtend.o"
2263 sparc-*-linux*) # SPARC's running GNU/Linux, libc6
2264 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux.h"
2265 extra_options="${extra_options} sparc/long-double-switch.opt"
2266 tmake_file="${tmake_file} sparc/t-linux sparc/t-crtfm"
2269 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp-elf.h sparc/rtemself.h rtems.h"
2270 tmake_file="sparc/t-elf sparc/t-crtfm t-rtems"
2271 extra_parts="crti.o crtn.o crtbegin.o crtend.o"
2273 sparc64-*-solaris2* | sparcv9-*-solaris2*)
2274 tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h"
2276 *-*-solaris2.1[0-9]*)
2277 tm_file="${tm_file} sol2-10.h"
2280 tm_file="${tm_file} sparc/sol2.h sparc/sol2-64.h sparc/sol2-bi.h"
2281 if test x$gnu_ld = xyes; then
2282 tm_file="${tm_file} sparc/sol2-gld.h sparc/sol2-gld-bi.h"
2284 if test x$gas = xyes; then
2285 tm_file="${tm_file} sparc/sol2-gas.h sparc/sol2-gas-bi.h"
2287 tm_file="${tm_file} tm-dwarf2.h"
2288 tmake_file="t-sol2 sparc/t-sol2 sparc/t-sol2-64 sparc/t-crtfm"
2289 if test x$gnu_ld = xyes; then
2290 tmake_file="$tmake_file t-slibgcc-elf-ver"
2292 tmake_file="$tmake_file t-slibgcc-sld"
2294 c_target_objs="sol2-c.o"
2295 cxx_target_objs="sol2-c.o"
2297 tm_p_file="${tm_p_file} sol2-protos.h"
2298 extra_parts="crt1.o crti.o crtn.o gcrt1.o crtbegin.o crtend.o"
2299 case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
2300 "":yes:* | yes:yes:* ) thread_file=posix ;;
2301 "":*:yes | yes:*:yes ) thread_file=solaris ;;
2303 need_64bit_hwint=yes
2306 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h"
2308 *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
2309 tm_file="${tm_file} sol2-6.h"
2311 *-*-solaris2.1[0-9]*)
2312 tm_file="${tm_file} sol2-10.h"
2315 tm_file="${tm_file} sparc/sol2.h"
2316 if test x$gnu_ld = xyes; then
2317 tm_file="${tm_file} sparc/sol2-gld.h"
2319 if test x$gas = xyes; then
2320 tm_file="${tm_file} sparc/sol2-gas.h"
2322 tmake_file="t-sol2 sparc/t-sol2 sparc/t-crtfm"
2323 if test x$gnu_ld = xyes; then
2324 tmake_file="$tmake_file t-slibgcc-elf-ver"
2326 tmake_file="$tmake_file t-slibgcc-sld"
2329 *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
2330 if test x$gnu_ld = xno; then
2331 tm_file="${tm_file} sparc/sol26-sld.h"
2334 *-*-solaris2.[789] | *-*-solaris2.1[0-9]*)
2335 tm_file="sparc/biarch64.h ${tm_file} sparc/sol2-bi.h"
2336 if test x$gnu_ld = xyes; then
2337 tm_file="${tm_file} sparc/sol2-gld-bi.h"
2339 if test x$gas = xyes; then
2340 tm_file="${tm_file} sparc/sol2-gas-bi.h"
2342 tm_file="${tm_file} tm-dwarf2.h"
2343 tmake_file="$tmake_file sparc/t-sol2-64"
2344 need_64bit_hwint=yes
2345 test x$with_cpu != x || with_cpu=v9
2348 c_target_objs="sol2-c.o"
2349 cxx_target_objs="sol2-c.o"
2351 tm_p_file="${tm_p_file} sol2-protos.h"
2352 extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
2353 case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
2354 "":yes:* | yes:yes:* )
2356 *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
2364 "":*:yes | yes:*:yes )
2370 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sysv4-only.h"
2372 extra_parts="crtbegin.o crtend.o"
2376 tm_file="${tm_file} elfos.h svr4.h sparc/sysv4.h vx-common.h vxworks.h sparc/vxworks.h"
2377 tmake_file="${tmake_file} sparc/t-vxworks"
2380 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h"
2381 extra_options="${extra_options} sparc/little-endian.opt"
2382 tmake_file="${tmake_file} sparc/t-crtfm"
2383 extra_parts="crtbegin.o crtend.o"
2386 sparc64-*-freebsd*|ultrasparc-*-freebsd*)
2387 tm_file="${tm_file} ${fbsd_tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/freebsd.h"
2388 extra_options="${extra_options} sparc/long-double-switch.opt"
2389 tmake_file="${tmake_file} sparc/t-crtfm"
2390 case "x$with_cpu" in
2392 x) with_cpu=ultrasparc ;;
2393 *) echo "$with_cpu not supported for freebsd target"; exit 1 ;;
2395 need_64bit_hwint=yes
2397 sparc64-*-linux*) # 64-bit SPARC's running GNU/Linux
2398 tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux64.h"
2399 extra_options="${extra_options} sparc/long-double-switch.opt"
2400 tmake_file="${tmake_file} sparc/t-linux sparc/t-linux64 sparc/t-crtfm"
2403 tm_file="sparc/biarch64.h ${tm_file}"
2404 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
2405 extra_options="${extra_options} sparc/long-double-switch.opt"
2406 tmake_file="${tmake_file} sparc/t-netbsd64"
2409 tm_file="dbxelf.h elfos.h spu/spu-elf.h spu/spu.h"
2410 tmake_file="spu/t-spu-elf"
2411 extra_headers="spu_intrinsics.h spu_internals.h vmx2spu.h spu_mfcio.h vec_types.h"
2412 extra_modes=spu/spu-modes.def
2413 c_target_objs="${c_target_objs} spu-c.o"
2414 cxx_target_objs="${cxx_target_objs} spu-c.o"
2417 tm_file="arm/strongarm-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
2418 tmake_file="arm/t-arm arm/t-strongarm-elf"
2421 extra_modes=arm/arm-modes.def
2425 tm_file="arm/semi.h arm/aout.h arm/coff.h dbxcoff.h arm/strongarm-coff.h arm/arm.h arm/pe.h arm/strongarm-pe.h"
2426 tmake_file="arm/t-arm arm/t-strongarm-pe"
2429 extra_modes=arm/arm-modes.def
2430 extra_options="${extra_options} arm/pe.opt"
2435 tm_file="arm/strongarm-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h kaos.h arm/kaos-strongarm.h"
2436 tmake_file="arm/t-arm arm/t-strongarm-elf"
2439 extra_modes=arm/arm-modes.def
2442 target_cpu_default="TARGET_CPU_v850e1"
2443 tm_file="dbxelf.h elfos.h svr4.h v850/v850.h"
2444 tm_p_file=v850/v850-protos.h
2445 tmake_file=v850/t-v850e
2446 md_file=v850/v850.md
2447 out_file=v850/v850.c
2448 extra_options="${extra_options} v850/v850.opt"
2449 if test x$stabs = xyes
2451 tm_file="${tm_file} dbx.h"
2454 c_target_objs="v850-c.o"
2455 cxx_target_objs="v850-c.o"
2459 target_cpu_default="TARGET_CPU_v850e"
2460 tm_file="dbxelf.h elfos.h svr4.h v850/v850.h"
2461 tm_p_file=v850/v850-protos.h
2462 tmake_file=v850/t-v850e
2463 md_file=v850/v850.md
2464 out_file=v850/v850.c
2465 extra_options="${extra_options} v850/v850.opt"
2466 if test x$stabs = xyes
2468 tm_file="${tm_file} dbx.h"
2471 c_target_objs="v850-c.o"
2472 cxx_target_objs="v850-c.o"
2476 target_cpu_default="TARGET_CPU_generic"
2477 tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
2478 tmake_file=v850/t-v850
2479 if test x$stabs = xyes
2481 tm_file="${tm_file} dbx.h"
2484 c_target_objs="v850-c.o"
2485 cxx_target_objs="v850-c.o"
2488 vax-*-bsd*) # VAXen running BSD
2489 tm_file="${tm_file} vax/bsd.h"
2490 tmake_file=vax/t-memfuncs
2494 vax-*-sysv*) # VAXen running system V
2495 tm_file="${tm_file} vax/vaxv.h"
2496 tmake_file=vax/t-memfuncs
2500 tm_file="${tm_file} elfos.h netbsd.h netbsd-elf.h vax/elf.h vax/netbsd-elf.h"
2503 tm_file="${tm_file} netbsd.h netbsd-aout.h vax/netbsd.h"
2509 tm_file="vax/vax.h vax/openbsd1.h openbsd.h vax/openbsd.h"
2512 vax-*-ultrix*) # VAXen running ultrix
2513 tm_file="${tm_file} vax/ultrix.h"
2514 tmake_file=vax/t-memfuncs
2518 tm_file="arm/xscale-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
2519 tmake_file="arm/t-arm arm/t-xscale-elf"
2522 extra_modes=arm/arm-modes.def
2526 tm_file="arm/semi.h arm/aout.h arm/coff.h dbxcoff.h arm/xscale-coff.h arm/arm.h"
2527 tmake_file="arm/t-arm arm/t-xscale-coff"
2530 extra_modes=arm/arm-modes.def
2534 # For historical reasons, the target files omit the 'x'.
2535 tm_file="dbxelf.h elfos.h svr4.h stormy16/stormy16.h"
2536 tm_p_file=stormy16/stormy16-protos.h
2537 md_file=stormy16/stormy16.md
2538 out_file=stormy16/stormy16.c
2539 extra_options=stormy16/stormy16.opt
2540 tmake_file="stormy16/t-stormy16"
2541 extra_parts="crtbegin.o crtend.o"
2545 tm_file="${tm_file} dbxelf.h elfos.h svr4.h xtensa/elf.h"
2546 tmake_file="xtensa/t-xtensa xtensa/t-elf"
2549 tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h xtensa/linux.h"
2550 tmake_file="${tmake_file} xtensa/t-xtensa xtensa/t-linux"
2553 tm_file="mn10300/mn10300.h dbxelf.h elfos.h linux.h mn10300/linux.h"
2554 tmake_file="${tmake_file} mn10300/t-linux"
2556 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
2560 tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
2561 c_target_objs="m32c-pragma.o"
2562 cxx_target_objs="m32c-pragma.o"
2566 echo "*** Configuration ${target} not supported" 1>&2
2572 i[34567]86-*-linux*aout* | i[34567]86-*-linux*libc1)
2573 tmake_file="${tmake_file} i386/t-gmm_malloc"
2575 i[34567]86-*-linux* | x86_64-*-linux*)
2576 tmake_file="${tmake_file} i386/t-pmm_malloc"
2578 i[34567]86-*-* | x86_64-*-*)
2579 tmake_file="${tmake_file} i386/t-gmm_malloc"
2583 # Support for --with-cpu and related options (and a few unrelated options,
2587 echo "--with-cpu must be passed a value" 1>&2
2592 # If there is no $with_cpu option, try to infer one from ${target}.
2593 # This block sets nothing except for with_cpu.
2594 if test x$with_cpu = x ; then
2597 # A Cirrus ARM variant.
2607 case ${target_noncanonical} in
2617 pentium_mmx-*|winchip_c6-*|winchip2-*|c3-*)
2618 with_cpu=pentium-mmx
2625 i686-*-* | i786-*-*)
2626 case ${target_noncanonical} in
2627 amdfam10-*|barcelona-*)
2630 k8-*|opteron-*|athlon_64-*)
2633 athlon_xp-*|athlon_mp-*|athlon_4-*)
2636 athlon_tbird-*|athlon-*)
2645 pentium3-*|pentium3m-*)
2648 pentium4-*|pentium4m-*)
2672 case ${target_noncanonical} in
2673 amdfam10-*|barcelona-*)
2676 k8-*|opteron-*|athlon_64-*)
2705 frv-*-*linux* | frv400-*-*linux*)
2712 with_cpu=`echo ${target} | sed 's/-.*$//'`
2715 case "$with_arch" in
2717 with_cpu=${default_cf_cpu}
2720 with_cpu=m${default_m68k_cpu}
2728 with_cpu="`echo ${target} | sed 's/-.*$//'`"
2733 # Similarly for --with-float
2734 if test x$with_float = x; then
2742 # Similarly for --with-schedule.
2743 if test x$with_schedule = x; then
2746 # Override default PA8000 scheduling model.
2747 with_schedule=7100LC
2752 # Validate and mark as valid any --with options supported
2753 # by this target. In order to use a particular --with option
2754 # you must list it in supported_defaults; validating the value
2755 # is optional. This case statement should set nothing besides
2756 # supported_defaults.
2761 supported_defaults="cpu tune"
2762 for which in cpu tune; do
2763 eval "val=\$with_$which"
2766 | ev4 | ev45 | 21064 | ev5 | 21164 | ev56 | 21164a \
2767 | pca56 | 21164PC | 21164pc | ev6 | 21264 | ev67 \
2771 echo "Unknown CPU used in --with-$which=$val" 1>&2
2779 supported_defaults="arch cpu float tune fpu abi mode"
2780 for which in cpu tune; do
2781 # See if it matches any of the entries in arm-cores.def
2782 eval "val=\$with_$which"
2783 if [ x"$val" = x ] \
2784 || grep "^ARM_CORE(\"$val\"," \
2785 ${srcdir}/config/arm/arm-cores.def \
2788 new_val=`grep "^ARM_CORE(\"$val\"," \
2789 ${srcdir}/config/arm/arm-cores.def | \
2790 sed -e 's/^[^,]*,[ ]*//' | \
2792 eval "target_${which}_cname=$new_val"
2793 echo "For $val real value is $new_val"
2796 echo "Unknown CPU used in --with-$which=$val" 1>&2
2801 case "$with_arch" in
2803 | armv[23456] | armv2a | armv3m | armv4t | armv5t \
2804 | armv5te | armv6j |armv6k | armv6z | armv6zk \
2809 echo "Unknown arch used in --with-arch=$with_arch" 1>&2
2814 case "$with_float" in
2816 | soft | hard | softfp)
2820 echo "Unknown floating point type used in --with-float=$with_float" 1>&2
2827 | fpa | fpe2 | fpe3 | maverick | vfp )
2831 echo "Unknown fpu used in --with-fpu=$with_fpu" 2>&1
2838 | apcs-gnu | atpcs | aapcs | iwmmxt )
2842 echo "Unknown ABI used in --with-abi=$with_abi"
2847 case "$with_mode" in
2853 echo "Unknown mode used in --with-mode=$with_mode"
2858 if test "x$with_arch" != x && test "x$with_cpu" != x; then
2859 echo "Warning: --with-arch overrides --with-cpu=$with_cpu" 1>&2
2864 supported_defaults=cpu
2869 echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
2875 fido-*-* | m680[012]0-*-* | m68k*-*-*)
2876 supported_defaults="arch cpu"
2877 case "$with_arch" in
2879 m68k_arch_family="$with_arch"
2882 echo "Invalid --with-arch=$with_arch" 1>&2
2887 # We always have a $with_cpu setting here.
2889 "m68000" | "m68010" | "m68020" | "m68030" | "m68040" | "m68060")
2890 m68k_cpu_ident=$with_cpu
2893 m68k_cpu_ident=m68020
2894 tm_defines="$tm_defines M68K_DEFAULT_TUNE=u68020_40"
2897 m68k_cpu_ident=m68020
2898 tm_defines="$tm_defines M68K_DEFAULT_TUNE=u68020_60"
2901 # We need the C identifier rather than the string.
2902 m68k_cpu_ident=`awk -v arg="\"$with_cpu\"" \
2903 'BEGIN { FS="[ \t]*[,()][ \t]*" }; \
2904 $1 == "M68K_DEVICE" && $2 == arg { print $3 }' \
2905 ${srcdir}/config/m68k/m68k-devices.def`
2906 if [ x"$m68k_cpu_ident" = x ] ; then
2907 echo "Unknown CPU used in --with-cpu=$with_cpu" 1>&2
2910 with_cpu="mcpu=$with_cpu"
2915 hppa*-*-* | parisc*-*-*)
2916 supported_defaults="arch schedule"
2918 case "$with_arch" in
2919 "" | 1.0 | 1.1 | 2.0)
2923 echo "Unknown architecture used in --with-arch=$with_arch" 1>&2
2928 case "$with_schedule" in
2929 "" | 700 | 7100 | 7100LC | 7200 | 7300 | 8000)
2933 echo "Unknown processor used in --with-schedule=$with_schedule." 1>&2
2939 i[34567]86-*-* | x86_64-*-*)
2940 supported_defaults="arch cpu tune"
2941 for which in arch cpu tune; do
2942 eval "val=\$with_$which"
2945 | i586 | pentium | pentium-mmx | winchip-c6 | winchip2 \
2946 | c3 | c3-2 | i686 | pentiumpro | pentium2 | pentium3 \
2947 | pentium4 | k6 | k6-2 | k6-3 | athlon | athlon-tbird \
2948 | athlon-4 | athlon-xp | athlon-mp | geode \
2949 | prescott | pentium-m | pentium4m | pentium3m)
2952 echo "CPU given in --with-$which=$val doesn't support 64bit mode." 1>&2
2958 "" | amdfam10 | barcelona | k8 | opteron | athlon64 | athlon-fx | nocona | core2 | generic)
2962 echo "Unknown CPU given in --with-$which=$val." 1>&2
2970 supported_defaults="abi arch float tune divide"
2972 case ${with_float} in
2977 echo "Unknown floating point type used in --with-float=$with_float" 1>&2
2983 "" | 32 | o64 | n32 | 64 | eabi)
2987 echo "Unknown ABI used in --with-abi=$with_abi" 1>&2
2992 case ${with_divide} in
2993 "" | breaks | traps)
2997 echo "Unknown division check type use in --with-divide=$with_divide" 1>&2
3003 supported_defaults="arch"
3005 case "$with_arch" in
3015 echo "Unknown arch used in --with-arch=$with_arch" 1>&2
3021 powerpc*-*-* | rs6000-*-*)
3022 supported_defaults="cpu float tune"
3024 for which in cpu tune; do
3025 eval "val=\$with_$which"
3027 default32 | default64)
3028 with_which="with_$which"
3032 tm_defines="${tm_defines} CONFIG_PPC405CR"
3033 eval "with_$which=405"
3036 | power | power[23456] | power6x | powerpc | powerpc64 \
3037 | rios | rios1 | rios2 | rsc | rsc1 | rs64a \
3038 | 401 | 403 | 405 | 405fp | 440 | 440fp | 505 \
3039 | 601 | 602 | 603 | 603e | ec603e | 604 \
3040 | 604e | 620 | 630 | 740 | 750 | 7400 | 7450 \
3041 | 854[08] | 801 | 821 | 823 | 860 | 970 | G3 | G4 | G5)
3045 echo "Unknown cpu used in --with-$which=$val." 1>&2
3053 supported_defaults="arch mode tune"
3055 for which in arch tune; do
3056 eval "val=\$with_$which"
3058 "" | g5 | g6 | z900 | z990 | z9-109 | z9-ec)
3062 echo "Unknown cpu used in --with-$which=$val." 1>&2
3068 case ${with_mode} in
3073 echo "Unknown architecture mode used in --with-mode=$with_mode." 1>&2
3079 sh[123456ble]-*-* | sh-*-*)
3080 supported_defaults="cpu"
3081 case "`echo $with_cpu | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz- | sed s/sh/m/`" in
3082 "" | m1 | m2 | m2e | m3 | m3e | m4 | m4-single | m4-single-only | m4-nofpu )
3085 m2a | m2a-single | m2a-single-only | m2a-nofpu)
3087 m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al)
3090 echo "Unknown CPU used in --with-cpu=$with_cpu, known values:" 1>&2
3091 echo "m1 m2 m2e m3 m3e m4 m4-single m4-single-only m4-nofpu" 1>&2
3092 echo "m4a m4a-single m4a-single-only m4a-nofpu m4al" 1>&2
3093 echo "m2a m2a-single m2a-single-only m2a-nofpu" 1>&2
3099 supported_defaults="cpu float tune"
3101 for which in cpu tune; do
3102 eval "val=\$with_$which"
3104 "" | sparc | sparcv9 | sparc64 | sparc86x \
3105 | v7 | cypress | v8 | supersparc | sparclite | f930 \
3106 | f934 | hypersparc | sparclite86x | sparclet | tsc701 \
3107 | v9 | ultrasparc | ultrasparc3 | niagara)
3111 echo "Unknown cpu used in --with-$which=$val" 1>&2
3117 case ${with_float} in
3122 echo "Unknown floating point type used in --with-float=$with_float" 1>&2
3129 supported_defaults=cpu
3131 "" | v850e | v850e1)
3135 echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
3142 # Set some miscellaneous flags for particular targets.
3143 target_cpu_default2=
3146 if test x$gas = xyes
3148 target_cpu_default2="MASK_GAS"
3153 if test x$target_cpu_cname = x
3155 target_cpu_default2=TARGET_CPU_generic
3157 target_cpu_default2=TARGET_CPU_$target_cpu_cname
3161 hppa*-*-* | parisc*-*-*)
3162 target_cpu_default2="MASK_BIG_SWITCH"
3163 if test x$gas = xyes
3165 target_cpu_default2="${target_cpu_default2}|MASK_GAS|MASK_JUMP_IN_DELAY"
3169 fido*-*-* | m680[012]0-*-* | m68k*-*-*)
3170 target_cpu_default2=$m68k_cpu_ident
3171 if [ x"$m68k_arch_family" != x ]; then
3172 tmake_file="m68k/t-$m68k_arch_family $tmake_file"
3177 if test x$gnu_ld = xyes
3179 target_cpu_default2="MASK_SPLIT_ADDRESSES"
3183 tm_defines="TARGET_ENDIAN_DEFAULT=0 $tm_defines"
3186 if test "x$enable_gofast" = xyes
3188 tm_defines="US_SOFTWARE_GOFAST $tm_defines"
3189 tmake_file="mips/t-gofast $tmake_file"
3191 tmake_file="mips/t-mips $tmake_file"
3195 powerpc*-*-* | rs6000-*-*)
3196 # FIXME: The PowerPC port uses the value set at compile time,
3197 # although it's only cosmetic.
3198 if test "x$with_cpu" != x
3200 target_cpu_default2="\\\"$with_cpu\\\""
3202 out_file=rs6000/rs6000.c
3203 c_target_objs="${c_target_objs} rs6000-c.o"
3204 cxx_target_objs="${cxx_target_objs} rs6000-c.o"
3205 tmake_file="rs6000/t-rs6000 ${tmake_file}"
3207 if test x$enable_e500_double = xyes
3209 tm_file="$tm_file rs6000/e500-double.h"
3213 sh[123456ble]*-*-* | sh-*-*)
3214 c_target_objs="${c_target_objs} sh-c.o"
3215 cxx_target_objs="${cxx_target_objs} sh-c.o"
3219 # Some standard aliases.
3224 xsparcv9 | xsparc64)
3229 # The SPARC port checks this value at compile-time.
3230 target_cpu_default2="TARGET_CPU_$with_cpu"
3233 # FIXME: The v850 is "special" in that it does not support
3234 # runtime CPU selection, only --with-cpu.
3235 case "x$with_cpu" in
3239 target_cpu_default2="TARGET_CPU_$with_cpu"
3246 all_defaults="abi cpu arch tune schedule float mode fpu divide"
3247 for option in $all_defaults
3249 eval "val=\$with_$option"
3250 if test -n "$val"; then
3251 case " $supported_defaults " in
3255 echo "This target does not support --with-$option." 2>&1
3256 echo "Valid --with options are: $supported_defaults" 2>&1
3263 t="{ \"$option\", \"$val\" }"
3265 t="${t}, { \"$option\", \"$val\" }"
3272 configure_default_options="{ { NULL, NULL} }"
3274 configure_default_options="{ ${t} }"
3277 if test "$target_cpu_default2" != ""
3279 if test "$target_cpu_default" != ""
3281 target_cpu_default="(${target_cpu_default}|${target_cpu_default2})"
3283 target_cpu_default=$target_cpu_default2