1 # GCC target-specific configuration file.
2 # Copyright 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007,
3 # 2008, 2009, 2010, 2011, 2012 Free Software Foundation, Inc.
5 #This file is part of GCC.
7 #GCC is free software; you can redistribute it and/or modify it under
8 #the terms of the GNU General Public License as published by the Free
9 #Software Foundation; either version 3, or (at your option) any later
12 #GCC is distributed in the hope that it will be useful, but WITHOUT
13 #ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 #FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
17 #You should have received a copy of the GNU General Public License
18 #along with GCC; see the file COPYING3. If not see
19 #<http://www.gnu.org/licenses/>.
21 # This is the GCC target-specific configuration file
22 # where a configuration type is mapped to different system-specific
23 # definitions and files. This is invoked by the autoconf-generated
24 # configure script. Putting it in a separate shell file lets us skip
25 # running autoconf when modifying target-specific information.
27 # When you change the cases in the OS or target switches, consider
28 # updating ../libgcc/config.host also.
30 # This file switches on the shell variable ${target}, and also uses the
31 # following shell variables:
33 # with_* Various variables as set by configure.
35 # enable_threads Either the name, yes or no depending on whether
36 # threads support was requested.
38 # default_use_cxa_atexit
39 # The default value for the $enable___cxa_atexit
40 # variable. enable___cxa_atexit needs to be set to
41 # "yes" for the correct operation of C++ destructors
42 # but it relies upon the presence of a non-standard C
43 # library function called __cxa_atexit.
44 # Since not all C libraries provide __cxa_atexit the
45 # default value of $default_use_cxa_atexit is set to
46 # "no" except for targets which are known to be OK.
48 # default_gnu_indirect_function
49 # The default value for the $enable_gnu_indirect_function
50 # variable. enable_gnu_indirect_function relies
51 # upon the presence of a non-standard gnu ifunc support
52 # in the assembler, linker and dynamic linker.
53 # Since not all libraries provide the dynamic linking
54 # support, the default value of
55 # $default_gnu_indirect_function is set to
56 # "no" except for targets which are known to be OK.
58 # gas_flag Either yes or no depending on whether GNU as was
61 # gnu_ld_flag Either yes or no depending on whether GNU ld was
64 # This file sets the following shell variables for use by the
65 # autoconf-generated configure script:
67 # cpu_type The name of the cpu, if different from the first
68 # chunk of the canonical target name.
70 # tm_defines List of target macros to define for all compilations.
72 # tm_file A list of target macro files, if different from
73 # "$cpu_type/$cpu_type.h". Usually it's constructed
74 # per target in a way like this:
75 # tm_file="${tm_file} dbxelf.h elfos.h ${cpu_type.h}/elf.h"
76 # Note that the preferred order is:
77 # - specific target header "${cpu_type}/${cpu_type.h}"
78 # - generic headers like dbxelf.h elfos.h, etc.
79 # - specializing target headers like ${cpu_type.h}/elf.h
80 # This helps to keep OS specific stuff out of the CPU
81 # defining header ${cpu_type}/${cpu_type.h}.
83 # It is possible to include automatically-generated
84 # build-directory files by prefixing them with "./".
85 # All other files should relative to $srcdir/config.
87 # tm_p_file Location of file with declarations for functions
90 # out_file The name of the machine description C support
91 # file, if different from "$cpu_type/$cpu_type.c".
93 # common_out_file The name of the source file for code shared between
94 # the compiler proper and the driver.
96 # md_file The name of the machine-description file, if
97 # different from "$cpu_type/$cpu_type.md".
99 # tmake_file A list of machine-description-specific
100 # makefile-fragments, if different from
101 # "$cpu_type/t-$cpu_type".
103 # extra_modes The name of the file containing a list of extra
104 # machine modes, if necessary and different from
105 # "$cpu_type/$cpu_type-modes.def".
107 # extra_objs List of extra objects that should be linked into
108 # the compiler proper (cc1, cc1obj, cc1plus)
109 # depending on target.
111 # extra_gcc_objs List of extra objects that should be linked into
112 # the compiler driver (gcc) depending on target.
114 # extra_headers List of used header files from the directory
115 # config/${cpu_type}.
117 # user_headers_inc_next_pre
118 # List of header file names of internal gcc header
119 # files, which should be prefixed by an include_next.
120 # user_headers_inc_next_post
121 # List of header file names of internal gcc header
122 # files, which should be postfixed by an include_next.
123 # use_gcc_tgmath If set, add tgmath.h to the list of used header
126 # use_gcc_stdint If "wrap", install a version of stdint.h that
127 # wraps the system's copy for hosted compilations;
128 # if "provide", provide a version of systems without
129 # such a system header; otherwise "none", do not
130 # provide such a header at all.
132 # extra_passes List of extra executables compiled for this target
133 # machine, used for compiling from source to object.
135 # extra_programs Like extra_passes, but these are used when linking.
137 # extra_options List of target-dependent .opt files.
139 # c_target_objs List of extra target-dependent objects that be
140 # linked into the C compiler only.
142 # cxx_target_objs List of extra target-dependent objects that be
143 # linked into the C++ compiler only.
145 # fortran_target_objs List of extra target-dependent objects that be
146 # linked into the fortran compiler only.
148 # target_gtfiles List of extra source files with type information.
150 # xm_defines List of macros to define when compiling for the
153 # xm_file List of files to include when compiling for the
156 # use_collect2 Set to yes or no, depending on whether collect2
159 # target_cpu_default Set to override the default target model.
161 # gdb_needs_out_file_path
162 # Set to yes if gdb needs a dir command with
163 # `dirname $out_file`.
165 # thread_file Set to control which thread package to use.
167 # gas Set to yes or no depending on whether the target
168 # system normally uses GNU as.
170 # need_64bit_hwint Set to yes if HOST_WIDE_INT must be 64 bits wide
171 # for this target. This is true if this target
172 # supports "long" or "wchar_t" wider than 32 bits,
173 # or BITS_PER_WORD is wider than 32 bits.
174 # The setting made here must match the one made in
175 # other locations such as libcpp/configure.ac
177 # configure_default_options
178 # Set to an initializer for configure_default_options
179 # in configargs.h, based on --with-cpu et cetera.
181 # native_system_header_dir
182 # Where system header files are found for this
183 # target. This defaults to /usr/include. If
184 # the --with-sysroot configure option or the
185 # --sysroot command line option is used this
186 # will be relative to the sysroot.
187 # target_type_format_char
188 # The default character to be used for formatting
190 # .type symbol_name, ${t_t_f_c}<property>
193 # The following variables are used in each case-construct to build up the
194 # outgoing variables:
196 # gnu_ld Set to yes or no depending on whether the target
197 # system normally uses GNU ld.
199 # target_has_targetcm Set to yes or no depending on whether the target
200 # has its own definition of targetcm.
202 # target_has_targetm_common Set to yes or no depending on whether the
203 # target has its own definition of targetm_common.
209 user_headers_inc_next_pre=
210 user_headers_inc_next_post=
221 target_has_targetcm=no
222 target_has_targetm_common=yes
225 # Set this to force installation and use of collect2.
227 # Set this to override the default target model.
229 # Set this if gdb needs a dir command with `dirname $out_file`
230 gdb_needs_out_file_path=
231 # Set this to control which thread package will be used.
233 # Reinitialize these from the flag values every loop pass, since some
234 # configure entries modify them.
236 gnu_ld="$gnu_ld_flag"
237 default_use_cxa_atexit=no
238 default_gnu_indirect_function=no
242 native_system_header_dir=/usr/include
243 target_type_format_char='@'
245 # Don't carry these over build->host->target. Please.
249 # Obsolete configurations.
251 # Avoid special cases that are not obsolete
269 if test "x$enable_obsolete" != xyes; then
270 echo "*** Configuration ${target} is obsolete." >&2
271 echo "*** Specify --enable-obsolete to build it anyway." >&2
272 echo "*** Support will be REMOVED in the next major release of GCC," >&2
273 echo "*** unless a maintainer comes forward." >&2
278 # Unsupported targets list. Do not put an entry in this list unless
279 # it would otherwise be caught by a more permissive pattern. The list
280 # should be in alphabetical order.
283 | i[34567]86-*-go32* \
284 | m68k-*-uclinuxoldabi* \
285 | mips64orion*-*-rtems* \
287 | sparc-hal-solaris2* \
289 | *-*-freebsd[12] | *-*-freebsd[12].* \
290 | *-*-freebsd*aout* \
298 | *-*-solaris2.[0-7] \
299 | *-*-solaris2.[0-7].* \
303 echo "*** Configuration ${target} not supported" 1>&2
308 # Set default cpu_type, tm_file, tm_p_file and xm_file so it can be
309 # updated in each machine entry. Also set default extra_headers for some
312 cpu_type=`echo ${target} | sed 's/-.*$//'`
317 tmake_file=m32c/t-m32c
318 target_has_targetm_common=no
323 extra_options="${extra_options} g.opt"
330 extra_headers="mmintrin.h arm_neon.h"
331 target_type_format_char='%'
332 c_target_objs="arm-c.o"
333 cxx_target_objs="arm-c.o"
334 extra_options="${extra_options} arm/arm-tables.opt"
338 c_target_objs="avr-c.o"
339 cxx_target_objs="avr-c.o"
340 extra_options="${extra_options} avr/avr-tables.opt"
349 extra_options="${extra_options} g.opt"
351 moxie*) cpu_type=moxie
352 target_has_targetm_common=no
356 extra_headers=math-68881.h
357 extra_options="${extra_options} m68k/m68k-tables.opt"
361 c_target_objs="i386-c.o"
362 cxx_target_objs="i386-c.o"
364 extra_options="${extra_options} fused-madd.opt"
365 extra_headers="cpuid.h mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
366 pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h
367 nmmintrin.h bmmintrin.h fma4intrin.h wmmintrin.h
368 immintrin.h x86intrin.h avxintrin.h xopintrin.h
369 ia32intrin.h cross-stdarg.h lwpintrin.h popcntintrin.h
370 lzcntintrin.h bmiintrin.h bmi2intrin.h tbmintrin.h
371 avx2intrin.h fmaintrin.h f16cintrin.h"
375 c_target_objs="i386-c.o"
376 cxx_target_objs="i386-c.o"
377 extra_options="${extra_options} fused-madd.opt"
378 extra_headers="cpuid.h mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
379 pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h
380 nmmintrin.h bmmintrin.h fma4intrin.h wmmintrin.h
381 immintrin.h x86intrin.h avxintrin.h xopintrin.h
382 ia32intrin.h cross-stdarg.h lwpintrin.h popcntintrin.h
383 lzcntintrin.h bmiintrin.h tbmintrin.h bmi2intrin.h
384 avx2intrin.h fmaintrin.h f16cintrin.h"
388 extra_headers=ia64intrin.h
390 extra_options="${extra_options} g.opt fused-madd.opt"
396 extra_options="${extra_options} g.opt"
400 extra_options="${extra_options} g.opt"
403 extra_headers=math-68881.h
404 extra_options="${extra_options} m68k/m68k-tables.opt"
408 extra_options="${extra_options} g.opt"
413 extra_headers="loongson.h"
414 extra_options="${extra_options} g.opt mips/mips-tables.opt"
421 extra_headers="ppc-asm.h altivec.h spe.h ppu_intrinsics.h paired.h spu2vmx.h vec_types.h si2vmx.h"
424 xpowerpc64|xdefault64|x6[23]0|x970|xG5|xpower[34567]|xpower6x|xrs64a|xcell|xa2|xe500mc64)
428 extra_options="${extra_options} g.opt fused-madd.opt rs6000/rs6000-tables.opt"
432 extra_options="${extra_options} g.opt fused-madd.opt rs6000/rs6000-tables.opt"
436 extra_options="${extra_options} g.opt"
440 c_target_objs="sparc-c.o"
441 cxx_target_objs="sparc-c.o"
442 extra_headers="visintrin.h"
452 extra_options="${extra_options} fused-madd.opt"
454 # Note the 'l'; we need to be able to match e.g. "shle" or "shl".
455 sh[123456789lbe]*-*-* | sh-*-*)
464 extra_headers="c6x_intrinsics.h"
465 extra_options="${extra_options} c6x/c6x-tables.opt"
468 extra_options="${extra_options} fused-madd.opt"
480 tm_file=${cpu_type}/${cpu_type}.h
481 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-protos.h
483 tm_p_file=${cpu_type}/${cpu_type}-protos.h
486 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-modes.def
488 extra_modes=${cpu_type}/${cpu_type}-modes.def
490 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}.opt
492 extra_options="${extra_options} ${cpu_type}/${cpu_type}.opt"
497 if test "x$enable_cld" = xyes; then
498 tm_defines="${tm_defines} USE_IX86_CLD=1"
500 if test "x$enable_frame_pointer" = xyes; then
501 tm_defines="${tm_defines} USE_IX86_FRAME_POINTER=1"
503 tm_file="vxworks-dummy.h ${tm_file}"
506 tm_file="i386/biarch64.h ${tm_file}"
507 if test "x$enable_cld" = xyes; then
508 tm_defines="${tm_defines} USE_IX86_CLD=1"
510 if test "x$enable_frame_pointer" = xyes; then
511 tm_defines="${tm_defines} USE_IX86_FRAME_POINTER=1"
513 tm_file="vxworks-dummy.h ${tm_file}"
517 # On a.out targets, we need to use collect2.
524 # Common C libraries.
525 tm_defines="$tm_defines LIBC_GLIBC=1 LIBC_UCLIBC=2 LIBC_BIONIC=3"
527 # Common parts for widely ported systems.
530 tmake_file="t-darwin ${cpu_type}/t-darwin"
531 tm_file="${tm_file} darwin.h"
534 tm_file="${tm_file} darwin9.h"
536 *-*-darwin[12][0-9]*)
537 tm_file="${tm_file} darwin9.h darwin10.h"
540 tm_file="${tm_file} ${cpu_type}/darwin.h"
541 tm_p_file="${tm_p_file} darwin-protos.h"
542 target_gtfiles="\$(srcdir)/config/darwin.c"
543 extra_options="${extra_options} darwin.opt"
544 c_target_objs="${c_target_objs} darwin-c.o"
545 cxx_target_objs="${cxx_target_objs} darwin-c.o"
546 fortran_target_objs="darwin-f.o"
547 target_has_targetcm=yes
548 extra_objs="darwin.o"
549 extra_gcc_objs="darwin-driver.o"
550 default_use_cxa_atexit=yes
552 case ${enable_threads} in
553 "" | yes | posix) thread_file='posix' ;;
557 # This is the generic ELF configuration of FreeBSD. Later
558 # machine-specific sections may refine and add to this
561 # Due to tm_file entry ordering issues that vary between cpu
562 # architectures, we only define fbsd_tm_file to allow the
563 # machine-specific section to dictate the final order of all
564 # entries of tm_file with the minor exception that components
565 # of the tm_file set here will always be of the form:
567 # freebsd<version_number>.h [freebsd-<conf_option>.h ...] freebsd-spec.h freebsd.h
569 # The machine-specific section should not tamper with this
570 # ordering but may order all other entries of tm_file as it
571 # pleases around the provided core setting.
574 fbsd_major=`echo ${target} | sed -e 's/.*freebsd//g' | sed -e 's/\..*//g'`
575 tm_defines="${tm_defines} FBSD_MAJOR=${fbsd_major}"
576 tmake_file="t-slibgcc"
577 case ${enable_threads} in
579 fbsd_tm_file="${fbsd_tm_file} freebsd-nthr.h"
585 echo 'Unknown thread configuration for FreeBSD'
589 fbsd_tm_file="${fbsd_tm_file} freebsd-spec.h freebsd.h freebsd-stdint.h"
590 extra_options="$extra_options rpath.opt freebsd.opt"
595 default_use_cxa_atexit=yes;;
597 # need_64bit_hwint=yes # system compiler has this for all arch!
600 *-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu | *-*-gnu* | *-*-kopensolaris*-gnu)
601 extra_options="$extra_options gnu-user.opt"
604 case ${enable_threads} in
605 "" | yes | posix) thread_file='posix' ;;
607 tmake_file="t-slibgcc"
609 *-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu | *-*-kopensolaris*-gnu)
612 native_system_header_dir=/include
615 # glibc / uclibc / bionic switch.
616 # uclibc and bionic aren't usable for GNU/Hurd and neither for GNU/k*BSD.
619 extra_options="$extra_options linux.opt";;
623 tm_defines="$tm_defines DEFAULT_LIBC=LIBC_BIONIC"
626 tm_defines="$tm_defines DEFAULT_LIBC=LIBC_UCLIBC"
629 tm_defines="$tm_defines DEFAULT_LIBC=LIBC_GLIBC"
632 # Assume that glibc or uClibc or Bionic are being used and so __cxa_atexit
634 default_use_cxa_atexit=yes
637 # Add Android userspace support to Linux targets.
640 tm_file="$tm_file linux-android.h"
641 extra_options="$extra_options linux-android.opt"
644 # Enable compilation for Android by default for *android* targets.
647 tm_defines="$tm_defines ANDROID_DEFAULT=1"
650 tm_defines="$tm_defines ANDROID_DEFAULT=0"
655 tmake_file="t-slibgcc"
659 # NetBSD 2.0 and later get POSIX threads enabled by default.
660 # Allow them to be explicitly enabled on any other version.
661 case ${enable_threads} in
664 *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
666 tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
672 tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
676 # NetBSD 2.0 and later provide __cxa_atexit(), which we use by
677 # default (unless overridden by --disable-__cxa_atexit).
679 *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
680 default_use_cxa_atexit=yes
685 tmake_file="t-openbsd"
686 case ${enable_threads} in
692 *-*-openbsd2.*|*-*-openbsd3.[012])
693 tm_defines="${tm_defines} HAS_LIBC_R=1" ;;
696 *-*-openbsd4.[3-9]|*-*-openbsd[5-9]*)
697 default_use_cxa_atexit=yes
702 case ${enable_threads} in
703 yes) thread_file='rtems' ;;
705 extra_options="${extra_options} rtems.opt"
709 extra_options="$extra_options gnu-user.opt"
711 tm_defines="$tm_defines DEFAULT_LIBC=LIBC_UCLIBC SINGLE_LIBC"
714 # i?86-*-solaris2* needs to insert headers between cpu default and
715 # Solaris 2 specific ones.
716 sol2_tm_file="dbxelf.h elfos.h ${cpu_type}/sysv4.h sol2.h ${cpu_type}/sol2.h"
718 *-*-solaris2.1[0-9]*)
719 sol2_tm_file="${sol2_tm_file} sol2-10.h"
723 use_gcc_stdint=provide
726 if test x$gnu_ld = xyes; then
727 tm_file="usegld.h ${tm_file}"
729 if test x$gas = xyes; then
730 tm_file="usegas.h ${tm_file}"
732 tm_p_file="${tm_p_file} sol2-protos.h"
733 tmake_file="${tmake_file} t-sol2 t-slibgcc"
734 c_target_objs="${c_target_objs} sol2-c.o"
735 cxx_target_objs="${cxx_target_objs} sol2-c.o sol2-cxx.o"
736 extra_objs="sol2.o sol2-stubs.o"
737 extra_options="${extra_options} sol2.opt"
738 case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
739 "":yes:* | yes:yes:* )
745 extra_options="${extra_options} vms/vms.opt"
747 tmake_file="vms/t-vms t-slibgcc"
749 target_gtfiles="$target_gtfiles \$(srcdir)/config/vms/vms.c"
750 tm_p_file="${tm_p_file} vms/vms-protos.h"
751 c_target_objs="vms-c.o"
752 cxx_target_objs="vms-c.o"
753 if test x$gnu_ld != xyes; then
754 # Build wrappers for native case.
755 extra_programs="ld\$(exeext) ar\$(exeext)"
756 tmake_file="$tmake_file vms/t-vmsnative"
762 extra_options="${extra_options} vxworks.opt"
764 case ${enable_threads} in
766 "" | yes | vxworks) thread_file='vxworks' ;;
767 *) echo 'Unknown thread configuration for VxWorks'; exit 1 ;;
771 # Assume that newlib is being used and so __cxa_atexit is provided.
772 default_use_cxa_atexit=yes
779 tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h glibc-stdint.h"
780 tmake_file="${tmake_file} alpha/t-linux"
781 extra_options="${extra_options} alpha/elf.opt"
782 target_cpu_default="MASK_GAS"
785 tm_file="${tm_file} ${fbsd_tm_file} alpha/elf.h alpha/freebsd.h"
786 extra_options="${extra_options} alpha/elf.opt"
787 target_cpu_default="MASK_GAS"
790 tm_file="${tm_file} netbsd.h alpha/elf.h netbsd-elf.h alpha/netbsd.h"
791 extra_options="${extra_options} netbsd.opt netbsd-elf.opt \
793 target_cpu_default="MASK_GAS"
796 tm_defines="${tm_defines} OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_FUNCTION_SIZE OBSD_HAS_DECLARE_OBJECT"
797 tm_file="alpha/alpha.h alpha/elf.h openbsd.h openbsd-stdint.h alpha/openbsd.h openbsd-libpthread.h"
798 extra_options="${extra_options} openbsd.opt alpha/elf.opt"
799 # default x-alpha is only appropriate for dec-osf.
800 target_cpu_default="MASK_GAS"
803 if test x$stabs = xyes
805 tm_file="${tm_file} dbx.h"
807 # mips-tfile and mips-tdump are only used with the native assembler
808 # and require the Tru64 UNIX <a.out.h>, so only build native.
809 if test x$gas != xyes && test x${host} = x${target}
811 extra_passes="mips-tfile mips-tdump"
814 tmake_file="t-slibgcc"
815 tm_file="${tm_file} alpha/osf5.h"
816 tm_defines="${tm_defines} TARGET_SUPPORT_ARCH=1"
817 extra_options="${extra_options} rpath.opt alpha/osf5.opt"
818 extra_headers=va_list.h
819 use_gcc_stdint=provide
820 case ${enable_threads} in
827 tm_file="${tm_file} vms/vms.h vms/vms64.h alpha/vms.h"
828 xm_file="alpha/xm-vms.h vms/xm-vms64.h"
829 tmake_file="${tmake_file} vms/t-vms64 alpha/t-vms"
832 tm_file="${tm_file} vms/vms.h alpha/vms.h"
833 xm_file="alpha/xm-vms.h"
834 tmake_file="${tmake_file} alpha/t-vms"
837 tm_file="elfos.h arm/elf.h arm/aout.h ${tm_file} vx-common.h vxworks.h arm/vxworks.h"
838 extra_options="${extra_options} arm/vxworks.opt"
839 tmake_file="${tmake_file} arm/t-arm arm/t-vxworks"
842 tm_file="dbxelf.h elfos.h ${fbsd_tm_file} arm/elf.h arm/aout.h arm/freebsd.h arm/arm.h"
843 tmake_file="${tmake_file} arm/t-arm arm/t-strongarm-elf"
846 tm_file="dbxelf.h elfos.h netbsd.h netbsd-elf.h arm/elf.h arm/aout.h arm/arm.h arm/netbsd-elf.h"
847 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
848 tmake_file="${tmake_file} arm/t-arm"
850 arm*-*-linux*) # ARM GNU/Linux with ELF
851 tm_file="dbxelf.h elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h arm/elf.h arm/linux-gas.h arm/linux-elf.h"
854 tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
857 tmake_file="${tmake_file} arm/t-arm"
860 tm_file="$tm_file arm/bpabi.h arm/linux-eabi.h"
861 tmake_file="$tmake_file arm/t-arm-elf arm/t-bpabi arm/t-linux-eabi"
862 # Define multilib configuration for arm-linux-androideabi.
865 tmake_file="$tmake_file arm/t-linux-androideabi"
868 # The BPABI long long divmod functions return a 128-bit value in
869 # registers r0-r3. Correctly modeling that requires the use of
872 # The EABI requires the use of __cxa_atexit.
873 default_use_cxa_atexit=yes
876 tmake_file="$tmake_file arm/t-linux"
879 with_tls=${with_tls:-gnu}
880 tm_file="$tm_file arm/aout.h arm/arm.h"
882 arm*-*-uclinux*) # ARM ucLinux
883 tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/linux-gas.h arm/uclinux-elf.h glibc-stdint.h"
884 tmake_file="arm/t-arm arm/t-arm-elf"
886 arm*-*-uclinux*eabi*)
887 tm_file="$tm_file arm/bpabi.h arm/uclinux-eabi.h"
888 tmake_file="$tmake_file arm/t-bpabi"
889 # The BPABI long long divmod functions return a 128-bit value in
890 # registers r0-r3. Correctly modeling that requires the use of
893 # The EABI requires the use of __cxa_atexit.
894 default_use_cxa_atexit=yes
896 tm_file="$tm_file arm/aout.h arm/arm.h"
899 tm_file="dbxelf.h elfos.h newlib-stdint.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/ecos-elf.h"
900 tmake_file="arm/t-arm arm/t-arm-elf"
903 tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/rtems-elf.h rtems.h newlib-stdint.h"
904 tmake_file="arm/t-arm arm/t-arm-elf t-rtems arm/t-rtems"
906 arm*-*-eabi* | arm*-*-symbianelf* | arm*-*-rtems*)
907 # The BPABI long long divmod functions return a 128-bit value in
908 # registers r0-r3. Correctly modeling that requires the use of
911 default_use_cxa_atexit=yes
912 tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/bpabi.h"
913 tmake_file="arm/t-arm arm/t-arm-elf"
916 tm_file="$tm_file newlib-stdint.h"
917 tmake_file="${tmake_file} arm/t-bpabi"
921 tm_file="${tm_file} rtems.h arm/rtems-eabi.h newlib-stdint.h"
922 tmake_file="${tmake_file} arm/t-bpabi t-rtems arm/t-rtems-eabi"
925 tm_file="${tm_file} arm/symbian.h"
926 # We do not include t-bpabi for Symbian OS because the system
927 # provides its own implementation of the BPABI functions.
928 tmake_file="${tmake_file} arm/t-symbian"
931 tm_file="${tm_file} arm/aout.h arm/arm.h"
934 tm_file="dbxelf.h elfos.h newlib-stdint.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
935 tmake_file="arm/t-arm arm/t-arm-elf"
938 tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h arm/wince-pe.h"
939 tmake_file="arm/t-arm arm/t-wince-pe"
940 extra_options="${extra_options} arm/pe.opt"
944 tm_file="elfos.h avr/elf.h avr/avr.h dbxelf.h avr/rtems.h rtems.h newlib-stdint.h"
945 tmake_file="avr/t-avr avr/t-multilib t-rtems avr/t-rtems"
946 extra_gcc_objs="driver-avr.o avr-devices.o"
947 extra_objs="avr-devices.o avr-log.o"
950 tm_file="elfos.h avr/elf.h avr/avr.h dbxelf.h avr/avr-stdint.h"
951 if test x${with_avrlibc} = xyes; then
952 tm_file="${tm_file} ${cpu_type}/avrlibc.h"
953 tm_defines="${tm_defines} WITH_AVRLIBC"
955 tmake_file="avr/t-avr avr/t-multilib"
957 extra_gcc_objs="driver-avr.o avr-devices.o"
958 extra_objs="avr-devices.o avr-log.o"
961 tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h bfin/elf.h"
962 tmake_file=bfin/t-bfin-elf
966 tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h gnu-user.h linux.h glibc-stdint.h bfin/uclinux.h"
967 tmake_file=bfin/t-bfin-uclinux
971 tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h gnu-user.h linux.h glibc-stdint.h bfin/linux.h ./linux-sysroot-suffix.h"
972 tmake_file="bfin/t-bfin-linux t-slibgcc"
976 tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h bfin/rtems.h rtems.h newlib-stdint.h"
977 tmake_file="t-rtems bfin/t-rtems"
980 tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h bfin/elf.h"
985 tm_file="elfos.h ${tm_file}"
986 tmake_file="${tmake_file} cr16/t-cr16 "
989 crisv32-*-elf | crisv32-*-none)
990 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
991 tmake_file="cris/t-cris"
992 target_cpu_default=32
994 extra_options="${extra_options} cris/elf.opt"
997 cris-*-elf | cris-*-none)
998 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
999 tmake_file="cris/t-cris cris/t-elfmulti"
1001 extra_options="${extra_options} cris/elf.opt"
1004 crisv32-*-linux* | cris-*-linux*)
1005 tm_file="dbxelf.h elfos.h ${tm_file} gnu-user.h linux.h glibc-stdint.h cris/linux.h"
1006 # We need to avoid using t-linux, so override default tmake_file
1007 tmake_file="cris/t-cris cris/t-linux t-slibgcc"
1008 extra_options="${extra_options} cris/linux.opt"
1011 target_cpu_default=10
1014 target_cpu_default=32
1019 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
1020 tmake_file="epiphany/t-epiphany"
1021 extra_options="${extra_options} fused-madd.opt"
1022 extra_objs="$extra_objs mode-switch-use.o resolve-sw-modes.o"
1023 tm_defines="${tm_defines} EPIPHANY_STACK_OFFSET=${with_stack_offset:-8}"
1024 extra_headers="epiphany_intrinsics.h"
1027 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
1030 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
1031 tmake_file=frv/t-frv
1034 tm_file="dbxelf.h elfos.h ${tm_file} \
1035 gnu-user.h linux.h glibc-stdint.h frv/linux.h"
1036 tmake_file="${tmake_file} frv/t-frv frv/t-linux"
1041 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
1042 tmake_file="${tmake_file} moxie/t-moxie"
1047 tm_file="dbxelf.h elfos.h ${tm_file} gnu-user.h linux.h glibc-stdint.h moxie/uclinux.h"
1048 tmake_file="${tmake_file} moxie/t-moxie"
1051 tmake_file="${tmake_file} moxie/t-moxie t-rtems"
1052 tm_file="moxie/moxie.h dbxelf.h elfos.h moxie/rtems.h rtems.h newlib-stdint.h"
1055 tmake_file="h8300/t-h8300 t-rtems h8300/t-rtems"
1056 tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h h8300/rtems.h rtems.h newlib-stdint.h"
1059 tmake_file="h8300/t-h8300"
1060 tm_file="h8300/h8300.h dbxelf.h elfos.h newlib-stdint.h h8300/elf.h"
1063 target_cpu_default="MASK_PA_11|MASK_PA_20"
1064 tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h gnu-user.h linux.h \
1065 glibc-stdint.h pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h \
1067 tmake_file="${tmake_file} pa/t-linux"
1069 need_64bit_hwint=yes
1072 target_cpu_default="MASK_PA_11|MASK_NO_SPACE_REGS"
1073 tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h pa/pa-linux.h \
1074 pa/pa32-regs.h pa/pa32-linux.h"
1075 tmake_file="${tmake_file} pa/t-linux"
1077 # port not yet contributed.
1079 # target_cpu_default="MASK_PA_11"
1081 hppa[12]*-*-hpux10*)
1083 hppa1.1-*-* | hppa2*-*-*)
1084 target_cpu_default="MASK_PA_11"
1087 tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
1088 pa/pa-hpux.h pa/pa-hpux10.h"
1089 extra_options="${extra_options} pa/pa-hpux.opt pa/pa-hpux10.opt"
1092 tm_file="${tm_file} pa/pa-hpux1010.h"
1093 extra_options="${extra_options} pa/pa-hpux1010.opt"
1096 use_gcc_stdint=provide
1097 tm_file="${tm_file} hpux-stdint.h"
1098 tmake_file="t-slibgcc"
1099 case ${enable_threads} in
1101 if test x$have_pthread_h = xyes ; then
1102 tmake_file="${tmake_file} pa/t-dce-thr"
1106 tmake_file="${tmake_file} pa/t-dce-thr"
1111 if test "x$with_dwarf2" != x; then
1112 echo "Warning: dwarf2 debug format is not supported for this target, --with-dwarf2 ignored" 1>&2
1117 target_cpu_default="MASK_PA_11|MASK_PA_20"
1118 if test x$gnu_ld = xyes
1120 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
1122 tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h \
1123 pa/pa64-regs.h pa/pa-hpux.h pa/pa-hpux1010.h \
1127 tm_file="${tm_file} pa/pa-hpux1111.h pa/pa-64.h pa/pa64-hpux.h"
1128 extra_options="${extra_options} pa/pa-hpux1111.opt"
1131 tm_file="${tm_file} pa/pa-hpux1131.h pa/pa-64.h pa/pa64-hpux.h"
1132 extra_options="${extra_options} pa/pa-hpux1131.opt"
1135 tm_file="${tm_file} pa/pa-64.h pa/pa64-hpux.h"
1138 extra_options="${extra_options} pa/pa-hpux.opt \
1139 pa/pa-hpux1010.opt pa/pa64-hpux.opt hpux11.opt"
1140 need_64bit_hwint=yes
1141 tmake_file="t-slibgcc"
1142 case x${enable_threads} in
1150 use_gcc_stdint=provide
1151 tm_file="${tm_file} hpux-stdint.h"
1155 tm_file="${tm_file} hpux-stdint.h"
1159 hppa[12]*-*-hpux11*)
1161 hppa1.1-*-* | hppa2*-*-*)
1162 target_cpu_default="MASK_PA_11"
1165 tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
1166 pa/pa-hpux.h pa/pa-hpux1010.h pa/pa-hpux11.h"
1167 extra_options="${extra_options} pa/pa-hpux.opt pa/pa-hpux1010.opt \
1171 tm_file="${tm_file} pa/pa-hpux1111.h"
1172 extra_options="${extra_options} pa/pa-hpux1111.opt"
1175 tm_file="${tm_file} pa/pa-hpux1131.h"
1176 extra_options="${extra_options} pa/pa-hpux1131.opt"
1179 tmake_file="t-slibgcc"
1180 case x${enable_threads} in
1189 use_gcc_stdint=provide
1190 tm_file="${tm_file} hpux-stdint.h"
1194 tm_file="${tm_file} hpux-stdint.h"
1197 if test "x$with_dwarf2" != x; then
1198 echo "Warning: dwarf2 debug format is not supported for this target, --with-dwarf2 ignored" 1>&2
1202 i[34567]86-*-darwin*)
1204 # Baseline choice for a machine that allows m64 support.
1205 with_cpu=${with_cpu:-core2}
1206 tmake_file="${tmake_file} t-slibgcc"
1209 with_cpu=${with_cpu:-core2}
1210 tmake_file="${tmake_file} ${cpu_type}/t-darwin64 t-slibgcc"
1211 tm_file="${tm_file} ${cpu_type}/darwin64.h"
1214 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h"
1217 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h i386/x86-64.h"
1219 i[34567]86-*-freebsd*)
1220 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/freebsd.h"
1223 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/x86-64.h i386/freebsd.h i386/freebsd64.h"
1225 i[34567]86-*-netbsdelf*)
1226 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/netbsd-elf.h"
1227 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
1230 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/x86-64.h i386/netbsd64.h"
1231 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
1233 i[34567]86-*-openbsd2.*|i[34567]86-*openbsd3.[0123])
1234 tm_file="i386/i386.h i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h openbsd-oldgas.h openbsd.h i386/openbsd.h"
1235 extra_options="${extra_options} openbsd.opt"
1236 # needed to unconfuse gdb
1237 tmake_file="${tmake_file} t-openbsd i386/t-openbsd"
1238 # we need collect2 until our bug is fixed...
1241 i[34567]86-*-openbsd*)
1242 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h"
1243 tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h i386/openbsdelf.h"
1244 extra_options="${extra_options} openbsd.opt"
1248 i[34567]86-*-linux* | i[34567]86-*-kfreebsd*-gnu | i[34567]86-*-knetbsd*-gnu | i[34567]86-*-gnu* | i[34567]86-*-kopensolaris*-gnu)
1249 # Intel 80386's running GNU/*
1250 # with ELF format using glibc 2
1251 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h gnu-user.h glibc-stdint.h"
1253 i[34567]86-*-linux*)
1254 tm_file="${tm_file} linux.h"
1255 # Assume modern glibc
1256 default_gnu_indirect_function=yes
1257 if test x$enable_targets = xall; then
1258 tm_file="${tm_file} i386/x86-64.h i386/gnu-user64.h i386/linux64.h"
1259 tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1260 tmake_file="${tmake_file} i386/t-linux64"
1261 x86_multilibs="${with_multilib_list}"
1262 if test "$x86_multilibs" = "default"; then
1263 x86_multilibs="m64,m32"
1265 x86_multilibs=`echo $x86_multilibs | sed -e 's/,/ /g'`
1266 for x86_multilib in ${x86_multilibs}; do
1267 case ${x86_multilib} in
1269 TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG},${x86_multilib}"
1272 echo "--with-multilib-list=${x86_with_multilib} not supported."
1276 TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's/^,//'`
1278 case X"${with_cpu}" in
1279 Xgeneric|Xatom|Xcore2|Xcorei7|Xcorei7-avx|Xnocona|Xx86-64|Xbdver2|Xbdver1|Xbtver1|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx|Xathlon64-sse3|Xk8-sse3|Xopteron-sse3)
1282 if test x$with_cpu_64 = x; then
1287 echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
1288 echo "generic atom core2 corei7 corei7-avx nocona x86-64 bdver2 bdver1 btver1 amdfam10 barcelona k8 opteron athlon64 athlon-fx athlon64-sse3 k8-sse3 opteron-sse3" 1>&2
1293 tm_file="${tm_file} i386/gnu-user.h i386/linux.h"
1296 i[34567]86-*-knetbsd*-gnu)
1297 tm_file="${tm_file} i386/gnu-user.h knetbsd-gnu.h i386/knetbsd-gnu.h"
1299 i[34567]86-*-kfreebsd*-gnu)
1300 tm_file="${tm_file} i386/gnu-user.h kfreebsd-gnu.h i386/kfreebsd-gnu.h"
1302 i[34567]86-*-kopensolaris*-gnu)
1303 tm_file="${tm_file} i386/gnu-user.h kopensolaris-gnu.h i386/kopensolaris-gnu.h"
1306 tm_file="$tm_file i386/gnu-user.h gnu.h i386/gnu.h"
1310 x86_64-*-linux* | x86_64-*-kfreebsd*-gnu | x86_64-*-knetbsd*-gnu)
1311 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h gnu-user.h glibc-stdint.h \
1312 i386/x86-64.h i386/gnu-user64.h"
1315 tm_file="${tm_file} linux.h i386/linux64.h"
1316 # Assume modern glibc
1317 default_gnu_indirect_function=yes
1319 x86_64-*-kfreebsd*-gnu)
1320 tm_file="${tm_file} kfreebsd-gnu.h i386/kfreebsd-gnu64.h"
1322 x86_64-*-knetbsd*-gnu)
1323 tm_file="${tm_file} knetbsd-gnu.h"
1326 tmake_file="${tmake_file} i386/t-linux64"
1327 x86_multilibs="${with_multilib_list}"
1328 if test "$x86_multilibs" = "default"; then
1329 x86_multilibs="m64,m32"
1331 x86_multilibs=`echo $x86_multilibs | sed -e 's/,/ /g'`
1332 for x86_multilib in ${x86_multilibs}; do
1333 case ${x86_multilib} in
1335 TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG},${x86_multilib}"
1338 echo "--with-multilib-list=${x86_with_multilib} not supported."
1342 TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's/^,//'`
1344 i[34567]86-pc-msdosdjgpp*)
1345 xm_file=i386/xm-djgpp.h
1346 tm_file="dbxcoff.h ${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/djgpp.h i386/djgpp-stdint.h"
1347 native_system_header_dir=/dev/env/DJDIR/include
1348 extra_options="${extra_options} i386/djgpp.opt"
1353 i[34567]86-*-lynxos*)
1355 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/lynx.h lynx.h"
1356 tmake_file="${tmake_file} t-lynx"
1357 extra_options="${extra_options} lynx.opt"
1362 i[34567]86-*-nto-qnx*)
1363 tm_file="${tm_file} i386/att.h dbxelf.h tm-dwarf2.h elfos.h i386/unix.h i386/nto.h"
1364 extra_options="${extra_options} i386/nto.opt"
1368 i[34567]86-*-rtems*)
1369 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/rtemself.h rtems.h newlib-stdint.h"
1370 tmake_file="${tmake_file} i386/t-rtems t-rtems"
1372 i[34567]86-*-solaris2* | x86_64-*-solaris2.1[0-9]*)
1373 tm_file="${tm_file} i386/unix.h i386/att.h ${sol2_tm_file}"
1374 # Set default arch_32 to pentium4, tune_32 to generic like the other
1375 # i386 targets, although config.guess defaults to i386-pc-solaris2*.
1378 # Solaris 8 and 9/x86 cannot execute SSE/SSE2 instructions by
1380 with_arch_32=${with_arch_32:-pentiumpro}
1383 with_arch_32=${with_arch_32:-pentium4}
1386 with_tune_32=${with_tune_32:-generic}
1388 *-*-solaris2.1[0-9]*)
1389 tm_file="${tm_file} i386/x86-64.h i386/sol2-bi.h sol2-bi.h"
1390 tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1391 tmake_file="$tmake_file i386/t-sol2-64"
1393 case X"${with_cpu}" in
1394 Xgeneric|Xatom|Xcore2|Xcorei7|Xcorei7-avx|Xnocona|Xx86-64|Xbdver2|Xbdver1|Xbtver1|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx|Xathlon64-sse3|Xk8-sse3|Xopteron-sse3)
1397 if test x$with_cpu_64 = x; then
1402 echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
1403 echo "generic atom core2 corei7 corei7-avx nocona x86-64 bdver2 bdver1 btver1 amdfam10 barcelona k8 opteron athlon64 athlon-fx athlon64-sse3 k8-sse3 opteron-sse3" 1>&2
1410 i[4567]86-wrs-vxworks|i[4567]86-wrs-vxworksae)
1411 tm_file="${tm_file} i386/unix.h i386/att.h elfos.h vx-common.h"
1414 tm_file="${tm_file} vxworksae.h i386/vx-common.h i386/vxworksae.h"
1415 tmake_file="${tmake_file} i386/t-vxworks i386/t-vxworksae"
1418 tm_file="${tm_file} vxworks.h i386/vx-common.h i386/vxworks.h"
1419 tmake_file="${tmake_file} i386/t-vxworks"
1423 i[34567]86-*-cygwin*)
1424 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/cygwin.h i386/cygwin-stdint.h"
1425 xm_file=i386/xm-cygwin.h
1426 tmake_file="${tmake_file} i386/t-cygming t-slibgcc"
1427 target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1428 extra_options="${extra_options} i386/cygming.opt"
1429 extra_objs="winnt.o winnt-stubs.o"
1430 c_target_objs="${c_target_objs} msformat-c.o"
1431 cxx_target_objs="${cxx_target_objs} winnt-cxx.o msformat-c.o"
1432 if test x$enable_threads = xyes; then
1437 i[34567]86-*-mingw* | x86_64-*-mingw*)
1438 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h"
1439 xm_file=i386/xm-mingw32.h
1441 x86_64-*-* | *-w64-*)
1447 if test x$enable_threads = xposix ; then
1448 tm_file="${tm_file} i386/mingw-pthread.h"
1450 tm_file="${tm_file} i386/mingw32.h"
1451 # This makes the logic if mingw's or the w64 feature set has to be used
1454 user_headers_inc_next_post="${user_headers_inc_next_post} float.h"
1455 user_headers_inc_next_pre="${user_headers_inc_next_pre} stddef.h stdarg.h"
1456 tm_file="${tm_file} i386/mingw-w64.h"
1457 if test x$enable_targets = xall; then
1458 tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1459 case X"${with_cpu}" in
1460 Xgeneric|Xatom|Xcore2|Xcorei7|Xcorei7-avx|Xnocona|Xx86-64|Xbdver2|Xbdver1|Xbtver1|Xamdfam10|Xbarcelona|Xk8|Xopteron|Xathlon64|Xathlon-fx|Xathlon64-sse3|Xk8-sse3|Xopteron-sse3)
1463 if test x$with_cpu_64 = x; then
1468 echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
1469 echo "generic atom core2 corei7 Xcorei7-avx nocona x86-64 bdver2 bdver1 btver1 amdfam10 barcelona k8 opteron athlon64 athlon-fx athlon64-sse3 k8-sse3 opteron-sse3" 1>&2
1478 tm_file="${tm_file} i386/mingw-stdint.h"
1479 tmake_file="${tmake_file} i386/t-cygming t-slibgcc"
1482 tmake_file="${tmake_file} i386/t-mingw-w64"
1485 tmake_file="${tmake_file} i386/t-mingw-w32"
1488 native_system_header_dir=/mingw/include
1489 target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1490 extra_options="${extra_options} i386/cygming.opt i386/mingw.opt"
1493 extra_options="${extra_options} i386/mingw-w64.opt"
1498 extra_objs="winnt.o winnt-stubs.o"
1499 c_target_objs="${c_target_objs} msformat-c.o"
1500 cxx_target_objs="${cxx_target_objs} winnt-cxx.o msformat-c.o"
1503 default_use_cxa_atexit=yes
1505 case ${enable_threads} in
1515 tm_file="${tm_file} i386/crtdll.h"
1517 *mingw32msv* | *mingw*)
1521 i[34567]86-*-interix[3-9]*)
1522 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/i386-interix.h"
1523 tmake_file="${tmake_file} i386/t-interix"
1524 extra_options="${extra_options} rpath.opt i386/interix.opt"
1525 extra_objs="winnt.o winnt-stubs.o"
1526 target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1527 if test x$enable_threads = xyes ; then
1530 if test x$stabs = xyes ; then
1531 tm_file="${tm_file} dbxcoff.h"
1535 tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h ia64/sysv4.h ia64/elf.h"
1536 tmake_file="ia64/t-ia64"
1537 target_cpu_default="0"
1538 if test x$gas = xyes
1540 target_cpu_default="${target_cpu_default}|MASK_GNU_AS"
1542 if test x$gnu_ld = xyes
1544 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
1548 tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} ia64/sysv4.h ia64/freebsd.h"
1549 target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1550 tmake_file="${tmake_file} ia64/t-ia64"
1553 tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ia64/sysv4.h ia64/linux.h"
1554 tmake_file="${tmake_file} ia64/t-ia64 ia64/t-linux t-libunwind"
1555 target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1558 tm_file="${tm_file} dbxelf.h elfos.h ia64/sysv4.h ia64/hpux.h"
1559 tmake_file="ia64/t-ia64 ia64/t-hpux t-slibgcc"
1560 target_cpu_default="MASK_GNU_AS"
1561 case x$enable_threads in
1567 c_target_objs="ia64-c.o"
1568 cxx_target_objs="ia64-c.o"
1569 extra_options="${extra_options} ia64/ilp32.opt hpux11.opt"
1571 tm_file="${tm_file} hpux-stdint.h"
1574 tm_file="${tm_file} ia64/hpux-unix2003.h"
1579 tm_file="${tm_file} elfos.h ia64/sysv4.h ia64/elf.h vms/vms.h vms/vms64.h ia64/vms.h"
1580 xm_file="vms/xm-vms.h vms/xm-vms64.h"
1581 tmake_file="${tmake_file} vms/t-vms64 ia64/t-ia64"
1582 target_cpu_default="0"
1583 if test x$gas = xyes
1585 target_cpu_default="${target_cpu_default}|MASK_GNU_AS"
1587 extra_options="${extra_options} ia64/vms.opt"
1590 tm_file="elfos.h newlib-stdint.h iq2000/iq2000.h"
1591 out_file=iq2000/iq2000.c
1592 md_file=iq2000/iq2000.md
1595 tm_file="dbxelf.h elfos.h ${tm_file}"
1596 tmake_file="${tmake_file} lm32/t-lm32"
1599 tm_file="dbxelf.h elfos.h ${tm_file} lm32/rtems.h rtems.h newlib-stdint.h"
1600 tmake_file="${tmake_file} lm32/t-lm32"
1601 tmake_file="${tmake_file} t-rtems"
1602 tmake_file="${tmake_file} lm32/t-rtems"
1605 tm_file="dbxelf.h elfos.h ${tm_file} gnu-user.h linux.h lm32/uclinux-elf.h"
1606 tmake_file="${tmake_file} lm32/t-lm32"
1609 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
1612 tm_file="dbxelf.h elfos.h newlib-stdint.h m32r/little.h ${tm_file}"
1615 tm_file="dbxelf.h elfos.h ${tm_file} m32r/rtems.h rtems.h newlib-stdint.h"
1616 tmake_file="m32r/t-m32r t-rtems"
1619 tm_file="dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ${tm_file} m32r/linux.h"
1620 # We override the tmake_file for linux -- why?
1621 tmake_file="m32r/t-linux t-slibgcc"
1623 if test x$enable_threads = xyes; then
1628 tm_file="dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h m32r/little.h ${tm_file} m32r/linux.h"
1629 # We override the tmake_file for linux -- why?
1630 tmake_file="m32r/t-linux t-slibgcc"
1632 if test x$enable_threads = xyes; then
1636 m68k-*-elf* | fido-*-elf*)
1639 # Check that $with_cpu makes sense.
1644 echo "Cannot accept --with-cpu=$with_cpu"
1651 default_m68k_cpu=68020
1655 tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h newlib-stdint.h m68k/m68kemb.h m68k/m68020-elf.h"
1656 tm_defines="${tm_defines} MOTOROLA=1"
1657 tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-m68kelf"
1658 # Add multilibs for targets other than fido.
1663 tmake_file="$tmake_file m68k/t-mlibs"
1668 default_m68k_cpu=68020
1670 tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h m68k/netbsd-elf.h"
1671 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
1672 tm_defines="${tm_defines} MOTOROLA=1"
1675 default_m68k_cpu=68020
1677 # needed to unconfuse gdb
1678 tm_defines="${tm_defines} OBSD_OLD_GAS"
1679 tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h m68k/openbsd.h"
1680 extra_options="${extra_options} openbsd.opt"
1681 tmake_file="t-openbsd m68k/t-openbsd"
1682 # we need collect2 until our bug is fixed...
1685 m68k-*-uclinux*) # Motorola m68k/ColdFire running uClinux
1686 # with uClibc, using the new GNU/Linux-style
1688 default_m68k_cpu=68020
1690 tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h flat.h m68k/linux.h m68k/uclinux.h ./sysroot-suffix.h"
1691 extra_options="${extra_options} m68k/uclinux.opt"
1692 tm_defines="${tm_defines} MOTOROLA=1"
1693 tmake_file="m68k/t-floatlib m68k/t-uclinux m68k/t-mlibs"
1695 m68k-*-linux*) # Motorola m68k's running GNU/Linux
1696 # with ELF format using glibc 2
1697 # aka the GNU/Linux C library 6.
1698 default_m68k_cpu=68020
1700 with_arch=${with_arch:-m68k}
1701 tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h m68k/linux.h ./sysroot-suffix.h"
1702 extra_options="${extra_options} m68k/ieee.opt"
1703 tm_defines="${tm_defines} MOTOROLA=1"
1704 tmake_file="${tmake_file} m68k/t-floatlib m68k/t-linux m68k/t-mlibs"
1707 default_m68k_cpu=68020
1709 tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-crtstuff t-rtems m68k/t-rtems m68k/t-mlibs"
1710 tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h newlib-stdint.h"
1711 tm_defines="${tm_defines} MOTOROLA=1"
1714 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file} mcore/mcore-elf.h"
1715 tmake_file=mcore/t-mcore
1719 tm_file="dbxelf.h elfos.h ${tm_file}"
1720 tmake_file=mep/t-mep
1721 c_target_objs="mep-pragma.o"
1722 cxx_target_objs="mep-pragma.o"
1723 if test -d "${srcdir}/../newlib/libc/include" &&
1724 test "x$with_headers" = x; then
1730 tm_file="${tm_file} dbxelf.h gnu-user.h linux.h microblaze/linux.h"
1731 c_target_objs="${c_target_objs} microblaze-c.o"
1732 cxx_target_objs="${cxx_target_objs} microblaze-c.o"
1734 microblaze*-*-rtems*)
1735 tm_file="${tm_file} dbxelf.h"
1736 tm_file="${tm_file} microblaze/rtems.h rtems.h newlib-stdint.h"
1737 c_target_objs="${c_target_objs} microblaze-c.o"
1738 cxx_target_objs="${cxx_target_objs} microblaze-c.o"
1739 tmake_file="${tmake_file} microblaze/t-microblaze"
1740 tmake_file="${tmake_file} t-rtems microblaze/t-rtems"
1743 tm_file="${tm_file} dbxelf.h"
1744 c_target_objs="${c_target_objs} microblaze-c.o"
1745 cxx_target_objs="${cxx_target_objs} microblaze-c.o"
1746 tmake_file="${tmake_file} microblaze/t-microblaze"
1749 tm_file="elfos.h ${tm_file} mips/iris6.h"
1750 tmake_file="mips/t-irix6 t-slibgcc"
1751 c_target_objs="irix6-c.o"
1752 cxx_target_objs="irix6-c.o"
1753 extra_options="${extra_options} rpath.opt mips/iris6.opt"
1754 target_cpu_default="MASK_ABICALLS"
1755 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_N32"
1756 # Only IRIX Development Foundation 1.3 for IRIX 6.5 provides stdint.h.
1758 if test "x$stabs" = xyes
1760 tm_file="${tm_file} dbx.h"
1762 if test "x$gnu_ld" = xyes
1764 tm_defines="${tm_defines} IRIX_USING_GNU_LD"
1766 case ${enable_threads}:${have_pthread_h} in
1767 "":yes | yes:yes ) thread_file=posix ;;
1770 mips*-*-netbsd*) # NetBSD/mips, either endian.
1771 target_cpu_default="MASK_ABICALLS"
1772 tm_file="elfos.h ${tm_file} mips/elf.h netbsd.h netbsd-elf.h mips/netbsd.h"
1773 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
1775 mips64*-*-linux* | mipsisa64*-*-linux*)
1776 tm_file="dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ${tm_file} mips/gnu-user.h mips/gnu-user64.h mips/linux64.h"
1777 tmake_file="${tmake_file} mips/t-linux64"
1778 tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_N32"
1780 mips64el-st-linux-gnu)
1781 tm_file="${tm_file} mips/st.h"
1782 tmake_file="${tmake_file} mips/t-st"
1784 mips64octeon*-*-linux*)
1785 tm_defines="${tm_defines} MIPS_CPU_STRING_DEFAULT=\\\"octeon\\\""
1786 target_cpu_default=MASK_SOFT_FLOAT_ABI
1788 mipsisa64r2*-*-linux*)
1789 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=65"
1794 test x$with_llsc != x || with_llsc=yes
1796 mips*-*-linux*) # Linux MIPS, either endian.
1797 tm_file="dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ${tm_file} mips/gnu-user.h mips/linux.h"
1798 if test x$enable_targets = xall; then
1799 tm_file="${tm_file} mips/gnu-user64.h mips/linux64.h"
1800 tmake_file="${tmake_file} mips/t-linux64"
1804 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33"
1807 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32"
1809 test x$with_llsc != x || with_llsc=yes
1812 tm_defines="${tm_defines} OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_OBJECT OBSD_HAS_CORRECT_SPECS"
1813 target_cpu_default="MASK_ABICALLS"
1814 tm_file="mips/mips.h openbsd.h openbsd-stdint.h openbsd-libpthread.h mips/openbsd.h mips/sdb.h"
1815 extra_options="${extra_options} openbsd.opt"
1818 tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=0";;
1819 *) tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=MASK_BIG_ENDIAN";;
1823 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/sde.h"
1824 tmake_file="mips/t-sde"
1825 extra_options="${extra_options} mips/sde.opt"
1826 case "${with_newlib}" in
1828 # newlib / libgloss.
1831 # MIPS toolkit libraries.
1832 tm_file="$tm_file mips/sdemtk.h"
1833 tmake_file="$tmake_file mips/t-sdemtk"
1834 case ${enable_threads} in
1836 thread_file='mipssde'
1843 tm_defines="MIPS_ISA_DEFAULT=33 MIPS_ABI_DEFAULT=ABI_32"
1846 tm_defines="MIPS_ISA_DEFAULT=32 MIPS_ABI_DEFAULT=ABI_32"
1849 tm_defines="MIPS_ISA_DEFAULT=65 MIPS_ABI_DEFAULT=ABI_N32"
1852 tm_defines="MIPS_ISA_DEFAULT=64 MIPS_ABI_DEFAULT=ABI_N32"
1856 mipsisa32-*-elf* | mipsisa32el-*-elf* | \
1857 mipsisa32r2-*-elf* | mipsisa32r2el-*-elf* | \
1858 mipsisa64-*-elf* | mipsisa64el-*-elf* | \
1859 mipsisa64r2-*-elf* | mipsisa64r2el-*-elf*)
1860 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1861 tmake_file="mips/t-isa3264"
1864 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33"
1867 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32"
1870 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=65"
1873 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64"
1877 mipsisa32*-*-elfoabi*)
1878 tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_32"
1879 tm_file="${tm_file} mips/elfoabi.h"
1881 mipsisa64*-*-elfoabi*)
1882 tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_O64"
1883 tm_file="${tm_file} mips/elfoabi.h"
1886 tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_EABI"
1890 mipsisa64sr71k-*-elf*)
1891 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1892 tmake_file=mips/t-sr71k
1893 target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1894 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sr71000\\\" MIPS_ABI_DEFAULT=ABI_EABI"
1896 mipsisa64sb1-*-elf* | mipsisa64sb1el-*-elf*)
1897 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1898 tmake_file="mips/t-elf mips/t-sb1"
1899 target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1900 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sb1\\\" MIPS_ABI_DEFAULT=ABI_O64"
1902 mips-*-elf* | mipsel-*-elf*)
1903 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1904 tmake_file="mips/t-elf"
1906 mips64-*-elf* | mips64el-*-elf*)
1907 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
1908 tmake_file="mips/t-elf"
1909 target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1910 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1912 mips64vr-*-elf* | mips64vrel-*-elf*)
1913 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/vr.h mips/elf.h"
1914 tmake_file=mips/t-vr
1915 tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_EABI"
1917 mips64orion-*-elf* | mips64orionel-*-elf*)
1918 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elforion.h mips/elf.h"
1919 tmake_file="mips/t-elf"
1920 target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1921 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1924 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/rtems.h rtems.h"
1925 tmake_file="mips/t-elf t-rtems mips/t-rtems"
1928 tm_file="elfos.h ${tm_file} mips/elf.h vx-common.h vxworks.h mips/vxworks.h"
1929 tmake_file="${tmake_file} mips/t-vxworks"
1931 mipstx39-*-elf* | mipstx39el-*-elf*)
1932 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/r3900.h mips/elf.h"
1933 tmake_file="mips/t-r3900"
1935 mmix-knuth-mmixware)
1936 tm_file="${tm_file} newlib-stdint.h"
1937 need_64bit_hwint=yes
1941 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
1942 if test x$stabs = xyes
1944 tm_file="${tm_file} dbx.h"
1950 tm_file="${tm_file} newlib-stdint.h"
1954 tm_file="${tm_file} newlib-stdint.h"
1956 tmake_file="picochip/t-picochip t-pnt16-warn"
1958 # port not yet contributed
1959 #powerpc-*-openbsd*)
1960 # tmake_file="${tmake_file} rs6000/t-fprules"
1964 extra_options="${extra_options} rs6000/darwin.opt"
1966 *-darwin1[0-9]* | *-darwin[8-9]*)
1967 tmake_file="${tmake_file} rs6000/t-darwin8"
1968 tm_file="${tm_file} rs6000/darwin8.h"
1971 tm_file="${tm_file} rs6000/darwin7.h"
1976 tmake_file="${tmake_file} t-slibgcc"
1977 extra_headers=altivec.h
1979 powerpc64-*-darwin*)
1980 extra_options="${extra_options} ${cpu_type}/darwin.opt"
1981 tmake_file="${tmake_file} ${cpu_type}/t-darwin64 t-slibgcc"
1982 tm_file="${tm_file} ${cpu_type}/darwin8.h ${cpu_type}/darwin64.h"
1983 extra_headers=altivec.h
1985 powerpc*-*-freebsd*)
1986 tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} rs6000/sysv4.h"
1987 extra_options="${extra_options} rs6000/sysv4.opt"
1988 tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1991 tm_file="${tm_file} rs6000/default64.h rs6000/freebsd64.h"
1992 tmake_file="${tmake_file} rs6000/t-freebsd64"
1993 extra_options="${extra_options} rs6000/linux64.opt"
1996 tm_file="${tm_file} rs6000/freebsd.h"
2001 tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h freebsd-spec.h rs6000/sysv4.h rs6000/netbsd.h"
2002 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
2003 tmake_file="${tmake_file} rs6000/t-netbsd"
2004 extra_options="${extra_options} rs6000/sysv4.opt"
2007 tm_file="${tm_file} dbxelf.h elfos.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabispe.h"
2008 extra_options="${extra_options} rs6000/sysv4.opt"
2009 tmake_file="rs6000/t-spe rs6000/t-ppccomm"
2012 powerpc-*-eabisimaltivec*)
2013 tm_file="${tm_file} dbxelf.h elfos.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h rs6000/eabialtivec.h"
2014 extra_options="${extra_options} rs6000/sysv4.opt"
2015 tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm"
2019 tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h"
2020 extra_options="${extra_options} rs6000/sysv4.opt"
2021 tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
2025 tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h"
2026 extra_options="${extra_options} rs6000/sysv4.opt"
2027 tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
2029 powerpc-*-eabialtivec*)
2030 tm_file="${tm_file} dbxelf.h elfos.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/eabialtivec.h"
2031 extra_options="${extra_options} rs6000/sysv4.opt"
2032 tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm"
2035 powerpc-xilinx-eabi*)
2036 tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/singlefp.h rs6000/xfpu.h rs6000/xilinx.h"
2037 extra_options="${extra_options} rs6000/sysv4.opt rs6000/xilinx.opt"
2038 tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm rs6000/t-xilinx"
2042 tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h"
2043 extra_options="${extra_options} rs6000/sysv4.opt"
2044 tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
2048 tm_file="${tm_file} dbxelf.h elfos.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/e500.h rs6000/rtems.h rtems.h"
2049 extra_options="${extra_options} rs6000/sysv4.opt"
2050 tmake_file="rs6000/t-fprules rs6000/t-rtems t-rtems rs6000/t-ppccomm"
2052 powerpc-*-linux* | powerpc64-*-linux*)
2053 tm_file="${tm_file} dbxelf.h elfos.h freebsd-spec.h rs6000/sysv4.h"
2054 extra_options="${extra_options} rs6000/sysv4.opt"
2055 tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
2058 powerpc64-*-linux*spe* | powerpc64-*-linux*paired*)
2059 echo "*** Configuration ${target} not supported" 1>&2
2062 powerpc-*-linux*spe* | powerpc-*-linux*paired*)
2066 test x$with_cpu != x || cpu_is_64bit=yes
2070 case ${maybe_biarch}:${enable_targets}:${cpu_is_64bit} in
2071 always:* | yes:*powerpc64* | yes:all:* | yes:*:yes)
2072 if test x$cpu_is_64bit = xyes; then
2073 tm_file="${tm_file} rs6000/default64.h"
2075 tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h glibc-stdint.h"
2076 tmake_file="$tmake_file rs6000/t-linux64"
2077 extra_options="${extra_options} rs6000/linux64.opt"
2080 tm_file="${tm_file} rs6000/linux.h glibc-stdint.h"
2081 tmake_file="$tmake_file rs6000/t-linux"
2085 powerpc*-*-linux*ppc476*)
2086 tm_file="${tm_file} rs6000/476.h"
2087 extra_options="${extra_options} rs6000/476.opt" ;;
2088 powerpc*-*-linux*altivec*)
2089 tm_file="${tm_file} rs6000/linuxaltivec.h" ;;
2090 powerpc*-*-linux*spe*)
2091 tm_file="${tm_file} rs6000/linuxspe.h rs6000/e500.h" ;;
2092 powerpc*-*-linux*paired*)
2093 tm_file="${tm_file} rs6000/750cl.h" ;;
2095 if test x${enable_secureplt} = xyes; then
2096 tm_file="rs6000/secureplt.h ${tm_file}"
2099 powerpc-wrs-vxworks|powerpc-wrs-vxworksae)
2100 tm_file="${tm_file} elfos.h freebsd-spec.h rs6000/sysv4.h"
2101 tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-ppccomm rs6000/t-vxworks"
2102 extra_options="${extra_options} rs6000/sysv4.opt"
2103 extra_headers=ppc-asm.h
2106 tm_file="${tm_file} vx-common.h vxworksae.h rs6000/vxworks.h rs6000/e500.h"
2107 tmake_file="${tmake_file} rs6000/t-vxworksae"
2110 tm_file="${tm_file} vx-common.h vxworks.h rs6000/vxworks.h rs6000/e500.h"
2116 tm_file="${tm_file} dbxelf.h elfos.h rs6000/sysv4.h rs6000/lynx.h lynx.h"
2117 tmake_file="t-lynx rs6000/t-lynx"
2118 extra_options="${extra_options} rs6000/sysv4.opt lynx.opt"
2124 tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h"
2125 tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
2126 extra_options="${extra_options} rs6000/sysv4.opt"
2128 powerpcle-*-eabisim*)
2129 tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/e500.h rs6000/eabisim.h"
2130 tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
2131 extra_options="${extra_options} rs6000/sysv4.opt"
2135 tm_file="${tm_file} dbxelf.h elfos.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/e500.h"
2136 tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
2137 extra_options="${extra_options} rs6000/sysv4.opt"
2140 rs6000-ibm-aix4.[3456789]* | powerpc-ibm-aix4.[3456789]*)
2141 tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix43.h rs6000/xcoff.h rs6000/aix-stdint.h"
2142 tmake_file="rs6000/t-aix43 t-slibgcc"
2143 extra_options="${extra_options} rs6000/aix64.opt"
2146 use_gcc_stdint=provide
2149 rs6000-ibm-aix5.1.* | powerpc-ibm-aix5.1.*)
2150 tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix51.h rs6000/xcoff.h rs6000/aix-stdint.h"
2151 extra_options="${extra_options} rs6000/aix64.opt"
2152 tmake_file="rs6000/t-aix43 t-slibgcc"
2158 rs6000-ibm-aix5.2.* | powerpc-ibm-aix5.2.*)
2159 tm_file="${tm_file} rs6000/aix.h rs6000/aix52.h rs6000/xcoff.h rs6000/aix-stdint.h"
2160 tmake_file="rs6000/t-aix52 t-slibgcc"
2161 extra_options="${extra_options} rs6000/aix64.opt"
2167 rs6000-ibm-aix5.3.* | powerpc-ibm-aix5.3.*)
2168 tm_file="${tm_file} rs6000/aix.h rs6000/aix53.h rs6000/xcoff.h rs6000/aix-stdint.h"
2169 tmake_file="rs6000/t-aix52 t-slibgcc"
2170 extra_options="${extra_options} rs6000/aix64.opt"
2174 extra_headers=altivec.h
2176 rs6000-ibm-aix[6789].* | powerpc-ibm-aix[6789].*)
2177 tm_file="${tm_file} rs6000/aix.h rs6000/aix61.h rs6000/xcoff.h rs6000/aix-stdint.h"
2178 tmake_file="rs6000/t-aix52 t-slibgcc"
2179 extra_options="${extra_options} rs6000/aix64.opt"
2183 extra_headers=altivec.h
2186 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
2187 target_has_targetm_common=no
2188 c_target_objs="rl78-c.o"
2189 cxx_target_objs="rl78-c.o"
2190 tmake_file="${tmake_file} rl78/t-rl78"
2193 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
2194 tmake_file="${tmake_file} rx/t-rx"
2197 tm_file="s390/s390.h dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h s390/linux.h"
2198 if test x$enable_targets = xall; then
2199 tmake_file="${tmake_file} s390/t-linux64"
2203 tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h s390/linux.h"
2204 tm_p_file=s390/s390-protos.h
2205 md_file=s390/s390.md
2206 extra_modes=s390/s390-modes.def
2207 out_file=s390/s390.c
2208 tmake_file="${tmake_file} s390/t-linux64"
2211 tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h s390/tpf.h"
2212 tm_p_file=s390/s390-protos.h
2213 md_file=s390/s390.md
2214 extra_modes=s390/s390-modes.def
2215 out_file=s390/s390.c
2217 extra_options="${extra_options} s390/tpf.opt"
2222 tm_file="dbxelf.h elfos.h score/elf.h score/score.h newlib-stdint.h"
2224 sh-*-elf* | sh[12346l]*-*-elf* | \
2225 sh-*-linux* | sh[2346lbe]*-*-linux* | \
2226 sh-*-netbsdelf* | shl*-*-netbsdelf* | sh5-*-netbsd* | sh5l*-*-netbsd* | \
2227 sh64-*-netbsd* | sh64l*-*-netbsd*)
2228 tmake_file="${tmake_file} sh/t-sh sh/t-elf"
2229 if test x${with_endian} = x; then
2231 sh[1234]*be-*-* | sh[1234]*eb-*-*) with_endian=big ;;
2232 shbe-*-* | sheb-*-*) with_endian=big,little ;;
2233 sh[1234]l* | sh[34]*-*-linux*) with_endian=little ;;
2234 shl* | sh64l* | sh*-*-linux* | \
2235 sh5l* | sh-superh-elf) with_endian=little,big ;;
2236 sh[1234]*-*-*) with_endian=big ;;
2237 *) with_endian=big,little ;;
2240 # TM_ENDIAN_CONFIG is used by t-sh to determine multilibs.
2241 # First word : the default endian.
2242 # Second word: the secondary endian (optional).
2243 case ${with_endian} in
2244 big) TM_ENDIAN_CONFIG=mb ;;
2245 little) TM_ENDIAN_CONFIG=ml ;;
2246 big,little) TM_ENDIAN_CONFIG="mb ml" ;;
2247 little,big) TM_ENDIAN_CONFIG="ml mb" ;;
2248 *) echo "with_endian=${with_endian} not supported."; exit 1 ;;
2250 case ${with_endian} in
2251 little*) tm_file="sh/little.h ${tm_file}" ;;
2253 tm_file="${tm_file} dbxelf.h elfos.h sh/elf.h"
2255 sh*-*-linux*) tmake_file="${tmake_file} sh/t-linux"
2256 tm_file="${tm_file} gnu-user.h linux.h glibc-stdint.h sh/linux.h" ;;
2258 tm_file="${tm_file} netbsd.h netbsd-elf.h sh/netbsd-elf.h"
2259 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
2262 sh*-superh-elf) if test x$with_libgloss != xno; then
2264 tm_file="${tm_file} sh/newlib.h"
2266 tm_file="${tm_file} sh/embed-elf.h"
2267 tm_file="${tm_file} sh/superh.h"
2268 extra_options="${extra_options} sh/superh.opt" ;;
2269 *) if test x$with_newlib = xyes \
2270 && test x$with_libgloss = xyes; then
2271 tm_file="${tm_file} sh/newlib.h"
2273 tm_file="${tm_file} sh/embed-elf.h" ;;
2277 # SHmedia, 32-bit ABI
2278 tmake_file="${tmake_file} sh/t-sh64"
2281 # SHmedia, 64-bit ABI
2282 tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd-sh5-64"
2287 tmake_file="${tmake_file} sh/t-sh64"
2288 tm_file="${tm_file} sh/sh64.h"
2289 extra_headers="shmedia.h ushmedia.h sshmedia.h"
2292 tmake_file="${tmake_file} sh/t-sh64"
2293 tm_file="${tm_file} sh/sh64.h"
2294 if test x$with_newlib = xyes; then
2295 tm_file="${tm_file} newlib-stdint.h"
2297 extra_headers="shmedia.h ushmedia.h sshmedia.h"
2300 tm_file="${tm_file} newlib-stdint.h"
2303 # sed el/eb endian suffixes away to avoid confusion with sh[23]e
2304 case `echo ${target} | sed 's/e[lb]-/-/'` in
2305 sh64*-*-netbsd*) sh_cpu_target=sh5-64media ;;
2306 sh64* | sh5*-*-netbsd*) sh_cpu_target=sh5-32media ;;
2307 sh4a_single_only*) sh_cpu_target=sh4a-single-only ;;
2308 sh4a_single*) sh_cpu_target=sh4a-single ;;
2309 sh4a_nofpu*) sh_cpu_target=sh4a-nofpu ;;
2310 sh4al) sh_cpu_target=sh4al ;;
2311 sh4a*) sh_cpu_target=sh4a ;;
2312 sh4_single_only*) sh_cpu_target=sh4-single-only ;;
2313 sh4_single*) sh_cpu_target=sh4-single ;;
2314 sh4_nofpu*) sh_cpu_target=sh4-nofpu ;;
2315 sh4* | sh-superh-*) sh_cpu_target=sh4 ;;
2316 sh3e*) sh_cpu_target=sh3e ;;
2317 sh*-*-netbsd* | sh3*) sh_cpu_target=sh3 ;;
2318 sh2a_single_only*) sh_cpu_target=sh2a-single-only ;;
2319 sh2a_single*) sh_cpu_target=sh2a-single ;;
2320 sh2a_nofpu*) sh_cpu_target=sh2a-nofpu ;;
2321 sh2a*) sh_cpu_target=sh2a ;;
2322 sh2e*) sh_cpu_target=sh2e ;;
2323 sh2*) sh_cpu_target=sh2 ;;
2324 *) sh_cpu_target=sh1 ;;
2326 # did the user say --without-fp ?
2327 if test x$with_fp = xno; then
2328 case ${sh_cpu_target} in
2329 sh5-*media) sh_cpu_target=${sh_cpu_target}-nofpu ;;
2331 sh4a* ) sh_cpu_target=sh4a-nofpu ;;
2332 sh4*) sh_cpu_target=sh4-nofpu ;;
2333 sh3*) sh_cpu_target=sh3 ;;
2334 sh2a*) sh_cpu_target=sh2a-nofpu ;;
2335 sh2*) sh_cpu_target=sh2 ;;
2336 *) echo --without-fp not available for $target: ignored
2338 tm_defines="$tm_defines STRICT_NOFPU=1"
2340 sh_cpu_default="`echo $with_cpu|sed s/^m/sh/|tr A-Z_ a-z-`"
2341 case $sh_cpu_default in
2342 sh5-64media-nofpu | sh5-64media | \
2343 sh5-32media-nofpu | sh5-32media | sh5-compact-nofpu | sh5-compact | \
2344 sh2a-single-only | sh2a-single | sh2a-nofpu | sh2a | \
2345 sh4a-single-only | sh4a-single | sh4a-nofpu | sh4a | sh4al | \
2346 sh4-single-only | sh4-single | sh4-nofpu | sh4 | sh4-300 | \
2347 sh3e | sh3 | sh2e | sh2 | sh1) ;;
2348 "") sh_cpu_default=${sh_cpu_target} ;;
2349 *) echo "with_cpu=$with_cpu not supported"; exit 1 ;;
2351 sh_multilibs=${with_multilib_list}
2352 if test "$sh_multilibs" = "default" ; then
2354 sh64-superh-linux* | \
2355 sh[1234]*) sh_multilibs=${sh_cpu_target} ;;
2356 sh64* | sh5*) sh_multilibs=m5-32media,m5-32media-nofpu,m5-compact,m5-compact-nofpu,m5-64media,m5-64media-nofpu ;;
2357 sh-superh-*) sh_multilibs=m4,m4-single,m4-single-only,m4-nofpu ;;
2358 sh*-*-linux*) sh_multilibs=m1,m2,m2a,m3e,m4 ;;
2359 sh*-*-netbsd*) sh_multilibs=m3,m3e,m4 ;;
2360 *) sh_multilibs=m1,m2,m2e,m4,m4-single,m4-single-only,m2a,m2a-single ;;
2362 if test x$with_fp = xno; then
2363 sh_multilibs="`echo $sh_multilibs|sed -e s/m4/sh4-nofpu/ -e s/,m4-[^,]*//g -e s/,m[23]e// -e s/m2a,m2a-single/m2a-nofpu/ -e s/m5-..m....,//g`"
2366 target_cpu_default=SELECT_`echo ${sh_cpu_default}|tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`
2367 tm_defines=${tm_defines}' SH_MULTILIB_CPU_DEFAULT=\"'`echo $sh_cpu_default|sed s/sh/m/`'\"'
2368 tm_defines="$tm_defines SUPPORT_`echo $sh_cpu_default | sed 's/^m/sh/' | tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`=1"
2369 sh_multilibs=`echo $sh_multilibs | sed -e 's/,/ /g' -e 's/^[Ss][Hh]/m/' -e 's/ [Ss][Hh]/ m/g' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz-`
2370 for sh_multilib in ${sh_multilibs}; do
2371 case ${sh_multilib} in
2372 m1 | m2 | m2e | m3 | m3e | \
2373 m4 | m4-single | m4-single-only | m4-nofpu | m4-300 |\
2374 m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al | \
2375 m2a | m2a-single | m2a-single-only | m2a-nofpu | \
2376 m5-64media | m5-64media-nofpu | \
2377 m5-32media | m5-32media-nofpu | \
2378 m5-compact | m5-compact-nofpu)
2379 # TM_MULTILIB_CONFIG is used by t-sh for the non-endian multilib definition
2380 # It is passed to MULTIILIB_OPTIONS verbatim.
2381 TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG}/${sh_multilib}"
2382 tm_defines="$tm_defines SUPPORT_`echo $sh_multilib | sed 's/^m/sh/' | tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`=1"
2384 \!*) # TM_MULTILIB_EXCEPTIONS_CONFIG is used by t-sh
2385 # It is passed the MULTILIB_EXCEPTIONS verbatim.
2386 TM_MULTILIB_EXCEPTIONS_CONFIG="${TM_MULTILIB_EXCEPTIONS_CONFIG} `echo $sh_multilib | sed 's/^!//'`" ;;
2388 echo "with_multilib_list=${sh_multilib} not supported."
2393 TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's:^/::'`
2394 if test x${enable_incomplete_targets} = xyes ; then
2395 tm_defines="$tm_defines SUPPORT_SH1=1 SUPPORT_SH2E=1 SUPPORT_SH4=1 SUPPORT_SH4_SINGLE=1 SUPPORT_SH2A=1 SUPPORT_SH2A_SINGLE=1 SUPPORT_SH5_32MEDIA=1 SUPPORT_SH5_32MEDIA_NOFPU=1 SUPPORT_SH5_64MEDIA=1 SUPPORT_SH5_64MEDIA_NOFPU=1"
2397 tm_file="$tm_file ./sysroot-suffix.h"
2398 tmake_file="$tmake_file t-sysroot-suffix"
2401 tmake_file="sh/t-sh t-rtems sh/t-rtems"
2402 tm_file="${tm_file} dbxelf.h elfos.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h newlib-stdint.h"
2405 tmake_file="$tmake_file sh/t-sh sh/t-vxworks"
2406 tm_file="${tm_file} elfos.h sh/elf.h sh/embed-elf.h vx-common.h vxworks.h sh/vxworks.h"
2409 tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp-elf.h"
2412 tmake_file="sparc/t-sparc sparc/t-leon"
2415 tmake_file="sparc/t-sparc sparc/t-leon3"
2418 tmake_file="sparc/t-sparc sparc/t-elf"
2423 tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/sp-elf.h sparc/rtemself.h rtems.h newlib-stdint.h"
2424 tmake_file="sparc/t-sparc sparc/t-elf sparc/t-rtems t-rtems"
2427 tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h gnu-user.h linux.h glibc-stdint.h sparc/tso.h"
2428 extra_options="${extra_options} sparc/long-double-switch.opt"
2431 tmake_file="${tmake_file} sparc/t-sparc sparc/t-leon"
2434 tmake_file="${tmake_file} sparc/t-sparc sparc/t-leon3"
2437 tmake_file="${tmake_file} sparc/t-sparc"
2440 if test x$enable_targets = xall; then
2441 tm_file="sparc/biarch64.h ${tm_file} sparc/linux64.h"
2442 tmake_file="${tmake_file} sparc/t-linux64"
2444 tm_file="${tm_file} sparc/linux.h"
2445 tmake_file="${tmake_file} sparc/t-linux"
2449 tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
2450 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
2451 extra_options="${extra_options} sparc/long-double-switch.opt"
2452 tmake_file="${tmake_file} sparc/t-sparc"
2455 tm_file="sparc/biarch64.h ${tm_file} ${sol2_tm_file} sol2-bi.h sparc/tso.h"
2457 sparc64-*-* | sparcv9-*-*)
2458 tm_file="sparc/default-64.h ${tm_file}"
2461 test x$with_cpu != x || with_cpu=v9
2464 tmake_file="${tmake_file} sparc/t-sparc sparc/t-sol2-64"
2467 tm_file="${tm_file} elfos.h sparc/sysv4.h vx-common.h vxworks.h sparc/vxworks.h"
2468 tmake_file="${tmake_file} sparc/t-sparc sparc/t-vxworks"
2471 tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp64-elf.h"
2472 extra_options="${extra_options}"
2473 tmake_file="${tmake_file} sparc/t-sparc"
2476 tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp64-elf.h sparc/rtemself.h rtems.h"
2477 extra_options="${extra_options}"
2478 tmake_file="${tmake_file} sparc/t-sparc sparc/t-rtems-64 t-rtems"
2481 tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h sparc/sysv4.h gnu-user.h linux.h glibc-stdint.h sparc/default-64.h sparc/linux64.h sparc/tso.h"
2482 extra_options="${extra_options} sparc/long-double-switch.opt"
2483 tmake_file="${tmake_file} sparc/t-sparc sparc/t-linux64"
2485 sparc64-*-freebsd*|ultrasparc-*-freebsd*)
2486 tm_file="${tm_file} ${fbsd_tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/freebsd.h"
2487 extra_options="${extra_options} sparc/long-double-switch.opt"
2488 case "x$with_cpu" in
2490 x) with_cpu=ultrasparc ;;
2491 *) echo "$with_cpu not supported for freebsd target"; exit 1 ;;
2493 tmake_file="${tmake_file} sparc/t-sparc"
2496 tm_file="sparc/biarch64.h ${tm_file}"
2497 tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
2498 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
2499 extra_options="${extra_options} sparc/long-double-switch.opt"
2500 tmake_file="${tmake_file} sparc/t-sparc sparc/t-netbsd64"
2503 tm_file="sparc/openbsd1-64.h ${tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/sp64-elf.h"
2504 tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h sparc/openbsd64.h"
2505 extra_options="${extra_options} openbsd.opt"
2506 extra_options="${extra_options}"
2509 tmake_file="${tmake_file} sparc/t-sparc"
2512 tm_file="dbxelf.h elfos.h spu/spu-elf.h spu/spu.h newlib-stdint.h"
2513 tmake_file="spu/t-spu-elf"
2514 native_system_header_dir=/include
2515 extra_headers="spu_intrinsics.h spu_internals.h vmx2spu.h spu_mfcio.h vec_types.h spu_cache.h"
2516 extra_modes=spu/spu-modes.def
2517 c_target_objs="${c_target_objs} spu-c.o"
2518 cxx_target_objs="${cxx_target_objs} spu-c.o"
2521 tm_file="elfos.h ${tm_file} c6x/elf-common.h c6x/elf.h"
2522 tm_file="${tm_file} dbxelf.h tm-dwarf2.h newlib-stdint.h"
2523 tmake_file="c6x/t-c6x c6x/t-c6x-elf"
2527 tm_file="elfos.h ${tm_file} gnu-user.h linux.h c6x/elf-common.h c6x/uclinux-elf.h"
2528 tm_file="${tm_file} dbxelf.h tm-dwarf2.h glibc-stdint.h"
2529 tm_file="${tm_file} ./sysroot-suffix.h"
2530 tmake_file="t-sysroot-suffix t-slibgcc"
2531 tmake_file="${tmake_file} c6x/t-c6x c6x/t-c6x-elf c6x/t-c6x-uclinux"
2535 tm_file="elfos.h gnu-user.h linux.h glibc-stdint.h tilegx/linux.h ${tm_file}"
2536 tmake_file="${tmake_file} tilegx/t-tilegx"
2537 extra_objs="mul-tables.o"
2538 c_target_objs="tilegx-c.o"
2539 cxx_target_objs="tilegx-c.o"
2540 extra_headers="feedback.h"
2543 tm_file="elfos.h gnu-user.h linux.h glibc-stdint.h tilepro/linux.h ${tm_file}"
2544 tmake_file="${tmake_file} tilepro/t-tilepro"
2545 extra_objs="mul-tables.o"
2546 c_target_objs="tilepro-c.o"
2547 cxx_target_objs="tilepro-c.o"
2548 extra_headers="feedback.h"
2551 target_cpu_default="TARGET_CPU_generic"
2552 tm_file="dbxelf.h elfos.h v850/v850.h"
2553 tm_file="${tm_file} rtems.h v850/rtems.h newlib-stdint.h"
2554 tmake_file="${tmake_file} v850/t-v850"
2555 tmake_file="${tmake_file} t-rtems v850/t-rtems"
2557 c_target_objs="v850-c.o"
2558 cxx_target_objs="v850-c.o"
2563 target_cpu_default="TARGET_CPU_v850e2v3"
2566 target_cpu_default="TARGET_CPU_v850e2"
2568 v850e1-*-* | v850es-*-*)
2569 target_cpu_default="TARGET_CPU_v850e1"
2572 target_cpu_default="TARGET_CPU_v850e"
2575 target_cpu_default="TARGET_CPU_generic"
2578 tm_file="dbxelf.h elfos.h newlib-stdint.h v850/v850.h"
2579 if test x$stabs = xyes
2581 tm_file="${tm_file} dbx.h"
2584 c_target_objs="v850-c.o"
2585 cxx_target_objs="v850-c.o"
2589 tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h vax/elf.h vax/linux.h"
2590 extra_options="${extra_options} vax/elf.opt"
2593 tm_file="${tm_file} elfos.h netbsd.h netbsd-elf.h vax/elf.h vax/netbsd-elf.h"
2594 extra_options="${extra_options} netbsd.opt netbsd-elf.opt vax/elf.opt"
2597 tm_file="vax/vax.h vax/openbsd1.h openbsd.h openbsd-stdint.h openbsd-pthread.h vax/openbsd.h"
2598 extra_options="${extra_options} openbsd.opt"
2602 # For historical reasons, the target files omit the 'x'.
2603 tm_file="dbxelf.h elfos.h newlib-stdint.h stormy16/stormy16.h"
2604 tm_p_file=stormy16/stormy16-protos.h
2605 md_file=stormy16/stormy16.md
2606 out_file=stormy16/stormy16.c
2607 extra_options=stormy16/stormy16.opt
2608 tmake_file="stormy16/t-stormy16"
2611 tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h xtensa/elf.h"
2612 extra_options="${extra_options} xtensa/elf.opt"
2615 tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h xtensa/linux.h"
2616 tmake_file="${tmake_file} xtensa/t-xtensa"
2619 tm_file="mn10300/mn10300.h dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h mn10300/linux.h"
2624 tm_file="dbxelf.h elfos.h ${tm_file} m32c/rtems.h rtems.h newlib-stdint.h"
2625 tmake_file="${tmake_file} t-rtems"
2626 c_target_objs="m32c-pragma.o"
2627 cxx_target_objs="m32c-pragma.o"
2630 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
2631 c_target_objs="m32c-pragma.o"
2632 cxx_target_objs="m32c-pragma.o"
2635 echo "*** Configuration ${target} not supported" 1>&2
2641 i[34567]86-*-linux* | x86_64-*-linux*)
2642 tmake_file="${tmake_file} i386/t-pmm_malloc i386/t-i386"
2644 i[34567]86-*-* | x86_64-*-*)
2645 tmake_file="${tmake_file} i386/t-gmm_malloc i386/t-i386"
2647 powerpc*-*-* | rs6000-*-*)
2648 tm_file="${tm_file} rs6000/option-defaults.h"
2651 if [ "$target_has_targetcm" = "no" ]; then
2652 c_target_objs="$c_target_objs default-c.o"
2653 cxx_target_objs="$cxx_target_objs default-c.o"
2656 if [ "$common_out_file" = "" ]; then
2657 if [ "$target_has_targetm_common" = "yes" ]; then
2658 common_out_file="$cpu_type/$cpu_type-common.c"
2660 common_out_file="default-common.c"
2664 # Support for --with-cpu and related options (and a few unrelated options,
2668 echo "--with-cpu must be passed a value" 1>&2
2673 # Set arch and cpu from ${target} and ${target_noncanonical}. Set cpu
2674 # to generic if there is no processor scheduler model for the target.
2677 arch_without_sse2=no
2678 arch_without_64bit=no
2681 if test $fbsd_major -ge 6; then
2687 arch_without_sse2=yes
2688 arch_without_64bit=yes
2693 arch_without_sse2=yes
2694 arch_without_64bit=yes
2699 arch_without_sse2=yes
2700 arch_without_64bit=yes
2703 arch_without_sse2=yes
2704 arch_without_64bit=yes
2705 case ${target_noncanonical} in
2718 pentium_mmx-*|winchip_c6-*|winchip2-*|c3-*)
2728 i686-*-* | i786-*-*)
2729 case ${target_noncanonical} in
2742 amdfam10-*|barcelona-*)
2746 k8_sse3-*|opteron_sse3-*|athlon64_sse3-*)
2750 k8-*|opteron-*|athlon64-*|athlon_fx-*)
2754 athlon_xp-*|athlon_mp-*|athlon_4-*)
2757 arch_without_sse2=yes
2758 arch_without_64bit=yes
2760 athlon_tbird-*|athlon-*)
2763 arch_without_sse2=yes
2768 arch_without_sse2=yes
2773 arch_without_sse2=yes
2775 pentium3-*|pentium3m-*)
2778 arch_without_sse2=yes
2780 pentium4-*|pentium4m-*)
2815 arch_without_sse2=yes
2820 arch_without_sse2=yes
2821 arch_without_64bit=yes
2826 case ${target_noncanonical} in
2839 amdfam10-*|barcelona-*)
2843 k8_sse3-*|opteron_sse3-*|athlon64_sse3-*)
2847 k8-*|opteron-*|athlon_64-*)
2875 # If there is no $with_cpu option, try to infer one from ${target}.
2876 # This block sets nothing except for with_cpu.
2877 if test x$with_cpu = x ; then
2879 i[34567]86-*-*|x86_64-*-*)
2897 frv-*-*linux* | frv400-*-*linux*)
2904 case "$with_arch" in
2906 with_cpu=${default_cf_cpu}
2909 with_cpu=m${default_m68k_cpu}
2920 with_cpu="`echo ${target} | sed 's/-.*$//'`"
2924 # Avoid overriding --with-cpu-32 and --with-cpu-64 values.
2926 i[34567]86-*-*|x86_64-*-*)
2927 if test x$with_cpu_32 != x || test x$with_cpu_64 != x; then
2928 if test x$with_cpu_32 = x; then
2929 with_cpu_32=$with_cpu
2931 if test x$with_cpu_64 = x; then
2932 with_cpu_64=$with_cpu
2940 # Support for --with-arch and related options (and a few unrelated options,
2942 case ${with_arch} in
2944 echo "--with-arch must be passed a value" 1>&2
2949 # If there is no $with_arch option, try to infer one from ${target}.
2950 # This block sets nothing except for with_arch.
2951 if test x$with_arch = x ; then
2953 i[34567]86-*-darwin*|x86_64-*-darwin*)
2954 # Default arch is set via TARGET_SUBTARGET32_ISA_DEFAULT
2955 # and TARGET_SUBTARGET64_ISA_DEFAULT in config/i386/darwin.h.
2958 # --with-fpmath sets the default ISA to SSE2, which is the same
2959 # ISA supported by Pentium 4.
2960 if test x$with_fpmath = x || test $arch_without_sse2 = no; then
2971 # Avoid overriding --with-arch-32 and --with-arch-64 values.
2973 i[34567]86-*-darwin*|x86_64-*-darwin*)
2974 # Default arch is set via TARGET_SUBTARGET32_ISA_DEFAULT
2975 # and TARGET_SUBTARGET64_ISA_DEFAULT in config/i386/darwin.h.
2977 i[34567]86-*-*|x86_64-*-*)
2978 if test x$with_arch_32 != x || test x$with_arch_64 != x; then
2979 if test x$with_arch_32 = x; then
2980 with_arch_32=$with_arch
2982 if test x$with_arch_64 = x; then
2983 if test $arch_without_64bit = yes; then
2984 # Set the default 64bit arch to x86-64 if the default arch
2985 # doesn't support 64bit.
2988 with_arch_64=$with_arch
2992 elif test $arch_without_64bit$need_64bit_isa = yesyes; then
2993 # Set the default 64bit arch to x86-64 if the default arch
2994 # doesn't support 64bit and we need 64bit ISA.
2995 with_arch_32=$with_arch
3003 # Support --with-fpmath.
3004 if test x$with_fpmath != x; then
3006 i[34567]86-*-* | x86_64-*-*)
3007 case ${with_fpmath} in
3009 tm_file="${tm_file} i386/avxmath.h"
3012 tm_file="${tm_file} i386/ssemath.h"
3015 echo "Invalid --with-fpmath=$with_fpmath" 1>&2
3021 echo "--with-fpmath isn't supported for $target." 1>&2
3027 # Similarly for --with-schedule.
3028 if test x$with_schedule = x; then
3031 # Override default PA8000 scheduling model.
3032 with_schedule=7100LC
3037 # Validate and mark as valid any --with options supported
3038 # by this target. In order to use a particular --with option
3039 # you must list it in supported_defaults; validating the value
3040 # is optional. This case statement should set nothing besides
3041 # supported_defaults.
3046 supported_defaults="cpu tune"
3047 for which in cpu tune; do
3048 eval "val=\$with_$which"
3051 | ev4 | ev45 | 21064 | ev5 | 21164 | ev56 | 21164a \
3052 | pca56 | 21164PC | 21164pc | ev6 | 21264 | ev67 \
3056 echo "Unknown CPU used in --with-$which=$val" 1>&2
3064 supported_defaults="arch cpu float tune fpu abi mode tls"
3065 for which in cpu tune; do
3066 # See if it matches any of the entries in arm-cores.def
3067 eval "val=\$with_$which"
3068 if [ x"$val" = x ] \
3069 || grep "^ARM_CORE(\"$val\"," \
3070 ${srcdir}/config/arm/arm-cores.def \
3073 new_val=`grep "^ARM_CORE(\"$val\"," \
3074 ${srcdir}/config/arm/arm-cores.def | \
3075 sed -e 's/^[^,]*,[ ]*//' | \
3077 eval "target_${which}_cname=$new_val"
3078 echo "For $val real value is $new_val"
3081 echo "Unknown CPU used in --with-$which=$val" 1>&2
3086 case "$with_arch" in
3088 | armv[23456] | armv2a | armv3m | armv4t | armv5t \
3089 | armv5te | armv6j |armv6k | armv6z | armv6zk | armv6-m \
3090 | armv7 | armv7-a | armv7-r | armv7-m \
3095 echo "Unknown arch used in --with-arch=$with_arch" 1>&2
3100 case "$with_float" in
3102 | soft | hard | softfp)
3106 echo "Unknown floating point type used in --with-float=$with_float" 1>&2
3113 | vfp | vfp3 | vfpv3 \
3114 | vfpv3-fp16 | vfpv3-d16 | vfpv3-d16-fp16 | vfpv3xd \
3115 | vfpv3xd-fp16 | neon | neon-fp16 | vfpv4 | vfpv4-d16 \
3116 | fpv4-sp-d16 | neon-vfpv4)
3119 fpa | fpe2 | fpe3 | maverick)
3120 if test "x$enable_obsolete" != xyes; then
3121 echo "*** Configuration option --with-fpu=${with_fpu} is obsolete." >&2
3122 echo "*** Specify --enable-obsolete to build it anyway." >&2
3123 echo "*** Support will be REMOVED in the next major release of GCC." >&2
3128 echo "Unknown fpu used in --with-fpu=$with_fpu" 2>&1
3135 | apcs-gnu | atpcs | aapcs | iwmmxt | aapcs-linux )
3139 echo "Unknown ABI used in --with-abi=$with_abi"
3144 case "$with_mode" in
3150 echo "Unknown mode used in --with-mode=$with_mode"
3161 echo "Unknown TLS method used in --with-tls=$with_tls" 1>&2
3166 if test "x$with_arch" != x && test "x$with_cpu" != x; then
3167 echo "Warning: --with-arch overrides --with-cpu=$with_cpu" 1>&2
3172 supported_defaults=cpu
3177 echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
3183 fido-*-* | m68k*-*-*)
3184 supported_defaults="arch cpu"
3185 case "$with_arch" in
3187 m68k_arch_family="$with_arch"
3190 echo "Invalid --with-arch=$with_arch" 1>&2
3195 # We always have a $with_cpu setting here.
3197 "m68000" | "m68010" | "m68020" | "m68030" | "m68040" | "m68060")
3198 m68k_cpu_ident=$with_cpu
3201 m68k_cpu_ident=m68020
3202 tm_defines="$tm_defines M68K_DEFAULT_TUNE=u68020_40"
3205 m68k_cpu_ident=m68020
3206 tm_defines="$tm_defines M68K_DEFAULT_TUNE=u68020_60"
3209 # We need the C identifier rather than the string.
3210 m68k_cpu_ident=`awk -v arg="\"$with_cpu\"" \
3211 'BEGIN { FS="[ \t]*[,()][ \t]*" }; \
3212 $1 == "M68K_DEVICE" && $2 == arg { print $3 }' \
3213 ${srcdir}/config/m68k/m68k-devices.def`
3214 if [ x"$m68k_cpu_ident" = x ] ; then
3215 echo "Unknown CPU used in --with-cpu=$with_cpu" 1>&2
3218 with_cpu="mcpu=$with_cpu"
3224 supported_defaults="arch schedule"
3226 case "$with_arch" in
3227 "" | 1.0 | 1.1 | 2.0)
3231 echo "Unknown architecture used in --with-arch=$with_arch" 1>&2
3236 case "$with_schedule" in
3237 "" | 700 | 7100 | 7100LC | 7200 | 7300 | 8000)
3241 echo "Unknown processor used in --with-schedule=$with_schedule." 1>&2
3247 i[34567]86-*-* | x86_64-*-*)
3248 supported_defaults="arch arch_32 arch_64 cpu cpu_32 cpu_64 tune tune_32 tune_64"
3249 for which in arch arch_32 arch_64 cpu cpu_32 cpu_64 tune tune_32 tune_64; do
3250 eval "val=\$with_$which"
3253 | i586 | pentium | pentium-mmx | winchip-c6 | winchip2 \
3254 | c3 | c3-2 | i686 | pentiumpro | pentium2 | pentium3 \
3255 | pentium4 | k6 | k6-2 | k6-3 | athlon | athlon-tbird \
3256 | athlon-4 | athlon-xp | athlon-mp | geode \
3257 | prescott | pentium-m | pentium4m | pentium3m)
3264 echo "CPU given in --with-$which=$val doesn't support 64bit mode." 1>&2
3272 "" | x86-64 | generic | native \
3273 | k8 | k8-sse3 | athlon64 | athlon64-sse3 | opteron \
3274 | opteron-sse3 | athlon-fx | bdver2 | bdver1 | btver1 \
3275 | amdfam10 | barcelona | nocona | core2 | corei7 \
3276 | corei7-avx | core-avx-i | core-avx2 | atom)
3280 echo "Unknown CPU given in --with-$which=$val." 1>&2
3288 supported_defaults="abi arch arch_32 arch_64 float tune tune_32 tune_64 divide llsc mips-plt synci"
3290 case ${with_float} in
3295 echo "Unknown floating point type used in --with-float=$with_float" 1>&2
3301 "" | 32 | o64 | n32 | 64 | eabi)
3305 echo "Unknown ABI used in --with-abi=$with_abi" 1>&2
3310 case ${with_divide} in
3311 "" | breaks | traps)
3315 echo "Unknown division check type use in --with-divide=$with_divide" 1>&2
3320 case ${with_llsc} in
3331 echo "Unknown llsc type used in --with-llsc" 1>&2
3336 case ${with_mips_plt} in
3341 with_mips_plt=no-plt
3346 echo "Unknown --with-mips-plt argument: $with_mips_plt" 1>&2
3351 case ${with_synci} in
3356 # No is the default.
3360 echo "Unknown synci type used in --with-synci" 1>&2
3366 powerpc*-*-* | rs6000-*-*)
3367 supported_defaults="cpu cpu_32 cpu_64 float tune tune_32 tune_64"
3369 for which in cpu cpu_32 cpu_64 tune tune_32 tune_64; do
3370 eval "val=\$with_$which"
3372 default32 | default64)
3377 echo "$val only valid for --with-cpu and --with-tune." 1>&2
3381 with_which="with_$which"
3385 tm_defines="${tm_defines} CONFIG_PPC405CR"
3386 eval "with_$which=405"
3389 | power | power[234567] | power6x | powerpc | powerpc64 \
3390 | rios | rios1 | rios2 | rsc | rsc1 | rs64a \
3391 | 401 | 403 | 405 | 405fp | 440 | 440fp | 464 | 464fp \
3392 | 476 | 476fp | 505 | 601 | 602 | 603 | 603e | ec603e \
3393 | 604 | 604e | 620 | 630 | 740 | 750 | 7400 | 7450 \
3394 | a2 | e300c[23] | 854[08] | e500mc | e500mc64 | titan\
3395 | 801 | 821 | 823 | 860 | 970 | G3 | G4 | G5 | cell)
3399 echo "Unknown cpu used in --with-$which=$val." 1>&2
3407 supported_defaults="arch mode tune"
3409 for which in arch tune; do
3410 eval "val=\$with_$which"
3412 "" | g5 | g6 | z900 | z990 | z9-109 | z9-ec | z10 | z196)
3416 echo "Unknown cpu used in --with-$which=$val." 1>&2
3422 case ${with_mode} in
3427 echo "Unknown architecture mode used in --with-mode=$with_mode." 1>&2
3433 sh[123456ble]-*-* | sh-*-*)
3434 supported_defaults="cpu"
3435 case "`echo $with_cpu | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz- | sed s/sh/m/`" in
3436 "" | m1 | m2 | m2e | m3 | m3e | m4 | m4-single | m4-single-only | m4-nofpu )
3439 m2a | m2a-single | m2a-single-only | m2a-nofpu)
3441 m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al)
3444 echo "Unknown CPU used in --with-cpu=$with_cpu, known values:" 1>&2
3445 echo "m1 m2 m2e m3 m3e m4 m4-single m4-single-only m4-nofpu" 1>&2
3446 echo "m4a m4a-single m4a-single-only m4a-nofpu m4al" 1>&2
3447 echo "m2a m2a-single m2a-single-only m2a-nofpu" 1>&2
3453 supported_defaults="cpu float tune"
3455 for which in cpu tune; do
3456 eval "val=\$with_$which"
3458 "" | sparc | sparcv9 | sparc64 \
3460 | v8 | supersparc | hypersparc | leon \
3461 | sparclite | f930 | f934 | sparclite86x \
3462 | sparclet | tsc701 \
3463 | v9 | ultrasparc | ultrasparc3 | niagara | niagara2 \
3464 | niagara3 | niagara4)
3468 echo "Unknown cpu used in --with-$which=$val" 1>&2
3474 case ${with_float} in
3479 echo "Unknown floating point type used in --with-float=$with_float" 1>&2
3486 supported_defaults="arch tune"
3488 for which in arch tune; do
3489 eval "val=\$with_$which"
3491 "" | cell | celledp)
3495 echo "Unknown cpu used in --with-$which=$val." 1>&2
3503 supported_defaults="arch"
3505 case ${with_arch} in
3506 "" | c62x | c64x | c64x+ | c67x | c67x+ | c674x)
3510 echo "Unknown arch used in --with-arch=$with_arch." 1>&2
3517 supported_defaults=cpu
3519 "" | v850e | v850e1 | v850e2 | v850es | v850e2v3)
3523 echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
3530 # Set some miscellaneous flags for particular targets.
3531 target_cpu_default2=
3534 if test x$gas = xyes
3536 target_cpu_default2="MASK_GAS"
3541 if test x$target_cpu_cname = x
3543 target_cpu_default2=TARGET_CPU_generic
3545 target_cpu_default2=TARGET_CPU_$target_cpu_cname
3550 target_cpu_default2="MASK_BIG_SWITCH"
3551 if test x$gas = xyes
3553 target_cpu_default2="${target_cpu_default2}|MASK_GAS|MASK_JUMP_IN_DELAY"
3557 fido*-*-* | m68k*-*-*)
3558 target_cpu_default2=$m68k_cpu_ident
3559 tmake_file="m68k/t-opts $tmake_file"
3560 if [ x"$m68k_arch_family" != x ]; then
3561 tmake_file="m68k/t-$m68k_arch_family $tmake_file"
3565 i[34567]86-*-darwin* | x86_64-*-darwin*)
3567 i[34567]86-*-linux* | x86_64-*-linux*)
3568 tmake_file="$tmake_file i386/t-linux"
3570 i[34567]86-*-kfreebsd*-gnu | x86_64-*-kfreebsd*-gnu)
3571 tmake_file="$tmake_file i386/t-kfreebsd"
3574 tmake_file="$tmake_file i386/t-gnu"
3576 i[34567]86-*-solaris2* | x86_64-*-solaris2.1[0-9]*)
3578 i[34567]86-*-cygwin* | i[34567]86-*-mingw* | x86_64-*-mingw*)
3580 i[34567]86-*-freebsd* | x86_64-*-freebsd*)
3586 if test x$gnu_ld = xyes
3588 target_cpu_default2="MASK_SPLIT_ADDRESSES"
3592 tm_defines="TARGET_ENDIAN_DEFAULT=0 $tm_defines"
3595 tmake_file="mips/t-mips $tmake_file"
3598 powerpc*-*-* | rs6000-*-*)
3599 # FIXME: The PowerPC port uses the value set at compile time,
3600 # although it's only cosmetic.
3601 if test "x$with_cpu" != x
3603 target_cpu_default2="\\\"$with_cpu\\\""
3605 out_file=rs6000/rs6000.c
3606 c_target_objs="${c_target_objs} rs6000-c.o"
3607 cxx_target_objs="${cxx_target_objs} rs6000-c.o"
3608 tmake_file="rs6000/t-rs6000 ${tmake_file}"
3610 if test x$enable_e500_double = xyes
3612 tm_file="$tm_file rs6000/e500-double.h"
3616 sh[123456ble]*-*-* | sh-*-*)
3617 c_target_objs="${c_target_objs} sh-c.o"
3618 cxx_target_objs="${cxx_target_objs} sh-c.o"
3622 if test x$with_tune = x ; then
3626 # The SPARC port checks this value at compile-time.
3627 target_cpu_default2="TARGET_CPU_$with_cpu"
3631 # Some standard aliases.
3636 xsparcv9 | xsparc64)
3641 # The SPARC port checks this value at compile-time.
3642 target_cpu_default2="TARGET_CPU_$with_cpu"
3646 case "x$with_cpu" in
3649 xv850e | xv850e1 | xv850e2 | xv850e2v3)
3650 target_cpu_default2="TARGET_CPU_$with_cpu"
3653 target_cpu_default2="TARGET_CPU_v850e1"
3660 all_defaults="abi cpu cpu_32 cpu_64 arch arch_32 arch_64 tune tune_32 tune_64 schedule float mode fpu divide llsc mips-plt synci tls"
3661 for option in $all_defaults
3663 eval "val=\$with_"`echo $option | sed s/-/_/g`
3664 if test -n "$val"; then
3665 case " $supported_defaults " in
3669 echo "This target does not support --with-$option." 2>&1
3670 echo "Valid --with options are: $supported_defaults" 2>&1
3677 t="{ \"$option\", \"$val\" }"
3679 t="${t}, { \"$option\", \"$val\" }"
3686 configure_default_options="{ { NULL, NULL} }"
3688 configure_default_options="{ ${t} }"
3691 if test "$target_cpu_default2" != ""
3693 if test "$target_cpu_default" != ""
3695 target_cpu_default="(${target_cpu_default}|${target_cpu_default2})"
3697 target_cpu_default=$target_cpu_default2