1 ------------------------------------------------------------------------------
3 -- GNAT COMPILER COMPONENTS --
9 -- Copyright (C) 1992-2009, Free Software Foundation, Inc. --
11 -- GNAT is free software; you can redistribute it and/or modify it under --
12 -- terms of the GNU General Public License as published by the Free Soft- --
13 -- ware Foundation; either version 3, or (at your option) any later ver- --
14 -- sion. GNAT is distributed in the hope that it will be useful, but WITH- --
15 -- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY --
16 -- or FITNESS FOR A PARTICULAR PURPOSE. --
18 -- As a special exception under Section 7 of GPL version 3, you are granted --
19 -- additional permissions described in the GCC Runtime Library Exception, --
20 -- version 3.1, as published by the Free Software Foundation. --
22 -- You should have received a copy of the GNU General Public License and --
23 -- a copy of the GCC Runtime Library Exception along with this program; --
24 -- see the files COPYING3 and COPYING.RUNTIME respectively. If not, see --
25 -- <http://www.gnu.org/licenses/>. --
27 -- GNAT was originally developed by the GNAT team at New York University. --
28 -- Extensive contributions were provided by Ada Core Technologies Inc. --
30 ------------------------------------------------------------------------------
32 -- This package contains host independent type definitions which are used
33 -- in more than one unit in the compiler. They are gathered here for easy
34 -- reference, though in some cases the full description is found in the
35 -- relevant module which implements the definition. The main reason that they
36 -- are not in their "natural" specs is that this would cause a lot of inter-
37 -- spec dependencies, and in particular some awkward circular dependencies
38 -- would have to be dealt with.
40 -- WARNING: There is a C version of this package. Any changes to this source
41 -- file must be properly reflected in the C header file types.h declarations.
43 -- Note: the declarations in this package reflect an expectation that the host
44 -- machine has an efficient integer base type with a range at least 32 bits
45 -- 2s-complement. If there are any machines for which this is not a correct
46 -- assumption, a significant number of changes will be required!
49 with Unchecked_Conversion;
50 with Unchecked_Deallocation;
55 -------------------------------
56 -- General Use Integer Types --
57 -------------------------------
59 type Int is range -2 ** 31 .. +2 ** 31 - 1;
60 -- Signed 32-bit integer
62 type Dint is range -2 ** 63 .. +2 ** 63 - 1;
63 -- Double length (64-bit) integer
65 subtype Nat is Int range 0 .. Int'Last;
66 -- Non-negative Int values
68 subtype Pos is Int range 1 .. Int'Last;
69 -- Positive Int values
71 type Word is mod 2 ** 32;
72 -- Unsigned 32-bit integer
74 type Short is range -32768 .. +32767;
75 for Short'Size use 16;
76 -- 16-bit signed integer
78 type Byte is mod 2 ** 8;
80 -- 8-bit unsigned integer
82 type size_t is mod 2 ** Standard'Address_Size;
83 -- Memory size value, for use in calls to C routines
85 --------------------------------------
86 -- 8-Bit Character and String Types --
87 --------------------------------------
89 -- We use Standard.Character and Standard.String freely, since we are
90 -- compiling ourselves, and we properly implement the required 8-bit
91 -- character code as required in Ada 95. This section defines a few
92 -- general use constants and subtypes.
94 EOF : constant Character := ASCII.SUB;
95 -- The character SUB (16#1A#) is used in DOS and other systems derived
96 -- from DOS (XP, NT etc) to signal the end of a text file. Internally
97 -- all source files are ended by an EOF character, even on Unix systems.
98 -- An EOF character acts as the end of file only as the last character
99 -- of a source buffer, in any other position, it is treated as a blank
100 -- if it appears between tokens, and as an illegal character otherwise.
101 -- This makes life easier dealing with files that originated from DOS,
102 -- including concatenated files with interspersed EOF characters.
104 subtype Graphic_Character is Character range ' ' .. '~';
105 -- Graphic characters, as defined in ARM
107 subtype Line_Terminator is Character range ASCII.LF .. ASCII.CR;
108 -- Line terminator characters (LF, VT, FF, CR)
110 -- This definition is dubious now that we have two more wide character
111 -- sequences that constitute a line terminator. Every reference to this
112 -- subtype needs checking to make sure the wide character case is handled
113 -- appropriately. ???
115 subtype Upper_Half_Character is
116 Character range Character'Val (16#80#) .. Character'Val (16#FF#);
117 -- Characters with the upper bit set
119 type Character_Ptr is access all Character;
120 type String_Ptr is access all String;
121 -- Standard character and string pointers
123 procedure Free is new Unchecked_Deallocation (String, String_Ptr);
124 -- Procedure for freeing dynamically allocated String values
126 subtype Big_String is String (Positive);
127 type Big_String_Ptr is access all Big_String;
128 for Big_String_Ptr'Storage_Size use 0;
129 -- Virtual type for handling imported big strings
131 function To_Big_String_Ptr is
132 new Unchecked_Conversion (System.Address, Big_String_Ptr);
133 -- Used to obtain Big_String_Ptr values from external addresses
135 subtype Word_Hex_String is String (1 .. 8);
136 -- Type used to represent Word value as 8 hex digits, with lower case
137 -- letters for the alphabetic cases.
139 function Get_Hex_String (W : Word) return Word_Hex_String;
140 -- Convert word value to 8-character hex string
142 -----------------------------------------
143 -- Types Used for Text Buffer Handling --
144 -----------------------------------------
146 -- We can not use type String for text buffers, since we must use the
147 -- standard 32-bit integer as an index value, since we count on all index
148 -- values being the same size.
150 type Text_Ptr is new Int;
151 -- Type used for subscripts in text buffer
153 type Text_Buffer is array (Text_Ptr range <>) of Character;
154 -- Text buffer used to hold source file or library information file
156 type Text_Buffer_Ptr is access all Text_Buffer;
157 -- Text buffers for input files are allocated dynamically and this type
158 -- is used to reference these text buffers.
160 procedure Free is new Unchecked_Deallocation (Text_Buffer, Text_Buffer_Ptr);
161 -- Procedure for freeing dynamically allocated text buffers
163 ------------------------------------------
164 -- Types Used for Source Input Handling --
165 ------------------------------------------
167 type Logical_Line_Number is range 0 .. Int'Last;
168 for Logical_Line_Number'Size use 32;
169 -- Line number type, used for storing logical line numbers (i.e. line
170 -- numbers that include effects of any Source_Reference pragmas in the
171 -- source file). The value zero indicates a line containing a source
174 No_Line_Number : constant Logical_Line_Number := 0;
175 -- Special value used to indicate no line number
177 type Physical_Line_Number is range 1 .. Int'Last;
178 for Physical_Line_Number'Size use 32;
179 -- Line number type, used for storing physical line numbers (i.e. line
180 -- numbers in the physical file being compiled, unaffected by the presence
181 -- of source reference pragmas.
183 type Column_Number is range 0 .. 32767;
184 for Column_Number'Size use 16;
185 -- Column number (assume that 2**15 - 1 is large enough). The range for
186 -- this type is used to compute Hostparm.Max_Line_Length. See also the
187 -- processing for -gnatyM in Stylesw).
189 No_Column_Number : constant Column_Number := 0;
190 -- Special value used to indicate no column number
192 subtype Source_Buffer is Text_Buffer;
193 -- Type used to store text of a source file . The buffer for the main
194 -- source (the source specified on the command line) has a lower bound
195 -- starting at zero. Subsequent subsidiary sources have lower bounds
196 -- which are one greater than the previous upper bound.
198 subtype Big_Source_Buffer is Text_Buffer (0 .. Text_Ptr'Last);
199 -- This is a virtual type used as the designated type of the access
200 -- type Source_Buffer_Ptr, see Osint.Read_Source_File for details.
202 type Source_Buffer_Ptr is access all Big_Source_Buffer;
203 for Source_Buffer_Ptr'Storage_Size use 0;
204 -- Pointer to source buffer. We use virtual origin addressing for source
205 -- buffers, with thin pointers. The pointer points to a virtual instance
206 -- of type Big_Source_Buffer, where the actual type is in fact of type
207 -- Source_Buffer. The address is adjusted so that the virtual origin
208 -- addressing works correctly. See Osint.Read_Source_Buffer for further
211 subtype Source_Ptr is Text_Ptr;
212 -- Type used to represent a source location, which is a subscript of a
213 -- character in the source buffer. As noted above, different source buffers
214 -- have different ranges, so it is possible to tell from a Source_Ptr value
215 -- which source it refers to. Note that negative numbers are allowed to
216 -- accommodate the following special values.
218 No_Location : constant Source_Ptr := -1;
219 -- Value used to indicate no source position set in a node. A test for a
220 -- Source_Ptr value being > No_Location is the approved way to test for a
221 -- standard value that does not include No_Location or any of the following
222 -- special definitions. One important use of No_Location is to label
223 -- generated nodes that we don't want the debugger to see in normal mode
224 -- (very often we conditionalize so that we set No_Location in normal mode
225 -- and the corresponding source line in -gnatD mode).
227 Standard_Location : constant Source_Ptr := -2;
228 -- Used for all nodes in the representation of package Standard other than
229 -- nodes representing the contents of Standard.ASCII. Note that testing for
230 -- a value being <= Standard_Location tests for both Standard_Location and
231 -- for Standard_ASCII_Location.
233 Standard_ASCII_Location : constant Source_Ptr := -3;
234 -- Used for all nodes in the presentation of package Standard.ASCII
236 System_Location : constant Source_Ptr := -4;
237 -- Used to identify locations of pragmas scanned by Targparm, where we
238 -- know the location is in System, but we don't know exactly what line.
240 First_Source_Ptr : constant Source_Ptr := 0;
241 -- Starting source pointer index value for first source program
243 -------------------------------------
244 -- Range Definitions for Tree Data --
245 -------------------------------------
247 -- The tree has fields that can hold any of the following types:
249 -- Pointers to other tree nodes (type Node_Id)
250 -- List pointers (type List_Id)
251 -- Element list pointers (type Elist_Id)
252 -- Names (type Name_Id)
253 -- Strings (type String_Id)
254 -- Universal integers (type Uint)
255 -- Universal reals (type Ureal)
257 -- In most contexts, the strongly typed interface determines which of
258 -- these types is present. However, there are some situations (involving
259 -- untyped traversals of the tree), where it is convenient to be easily
260 -- able to distinguish these values. The underlying representation in all
261 -- cases is an integer type Union_Id, and we ensure that the range of
262 -- the various possible values for each of the above types is disjoint
263 -- so that this distinction is possible.
265 type Union_Id is new Int;
266 -- The type in the tree for a union of possible ID values
268 -- Note: it is also helpful for debugging purposes to make these ranges
269 -- distinct. If a bug leads to misidentification of a value, then it will
270 -- typically result in an out of range value and a Constraint_Error.
272 List_Low_Bound : constant := -100_000_000;
273 -- The List_Id values are subscripts into an array of list headers which
274 -- has List_Low_Bound as its lower bound. This value is chosen so that all
275 -- List_Id values are negative, and the value zero is in the range of both
276 -- List_Id and Node_Id values (see further description below).
278 List_High_Bound : constant := 0;
279 -- Maximum List_Id subscript value. This allows up to 100 million list Id
280 -- values, which is in practice infinite, and there is no need to check the
281 -- range. The range overlaps the node range by one element (with value
282 -- zero), which is used both for the Empty node, and for indicating no
283 -- list. The fact that the same value is used is convenient because it
284 -- means that the default value of Empty applies to both nodes and lists,
285 -- and also is more efficient to test for.
287 Node_Low_Bound : constant := 0;
288 -- The tree Id values start at zero, because we use zero for Empty (to
289 -- allow a zero test for Empty). Actual tree node subscripts start at 0
290 -- since Empty is a legitimate node value.
292 Node_High_Bound : constant := 099_999_999;
293 -- Maximum number of nodes that can be allocated is 100 million, which
294 -- is in practice infinite, and there is no need to check the range.
296 Elist_Low_Bound : constant := 100_000_000;
297 -- The Elist_Id values are subscripts into an array of elist headers which
298 -- has Elist_Low_Bound as its lower bound.
300 Elist_High_Bound : constant := 199_999_999;
301 -- Maximum Elist_Id subscript value. This allows up to 100 million Elists,
302 -- which is in practice infinite and there is no need to check the range.
304 Elmt_Low_Bound : constant := 200_000_000;
305 -- Low bound of element Id values. The use of these values is internal to
306 -- the Elists package, but the definition of the range is included here
307 -- since it must be disjoint from other Id values. The Elmt_Id values are
308 -- subscripts into an array of list elements which has this as lower bound.
310 Elmt_High_Bound : constant := 299_999_999;
311 -- Upper bound of Elmt_Id values. This allows up to 100 million element
312 -- list members, which is in practice infinite (no range check needed).
314 Names_Low_Bound : constant := 300_000_000;
315 -- Low bound for name Id values
317 Names_High_Bound : constant := 399_999_999;
318 -- Maximum number of names that can be allocated is 100 million, which is
319 -- in practice infinite and there is no need to check the range.
321 Strings_Low_Bound : constant := 400_000_000;
322 -- Low bound for string Id values
324 Strings_High_Bound : constant := 499_999_999;
325 -- Maximum number of strings that can be allocated is 100 million, which
326 -- is in practice infinite and there is no need to check the range.
328 Ureal_Low_Bound : constant := 500_000_000;
329 -- Low bound for Ureal values
331 Ureal_High_Bound : constant := 599_999_999;
332 -- Maximum number of Ureal values stored is 100_000_000 which is in
333 -- practice infinite so that no check is required.
335 Uint_Low_Bound : constant := 600_000_000;
336 -- Low bound for Uint values
338 Uint_Table_Start : constant := 2_000_000_000;
339 -- Location where table entries for universal integers start (see
340 -- Uintp spec for details of the representation of Uint values).
342 Uint_High_Bound : constant := 2_099_999_999;
343 -- The range of Uint values is very large, since a substantial part
344 -- of this range is used to store direct values, see Uintp for details.
346 -- The following subtype definitions are used to provide convenient names
347 -- for membership tests on Int values to see what data type range they
348 -- lie in. Such tests appear only in the lowest level packages.
350 subtype List_Range is Union_Id
351 range List_Low_Bound .. List_High_Bound;
353 subtype Node_Range is Union_Id
354 range Node_Low_Bound .. Node_High_Bound;
356 subtype Elist_Range is Union_Id
357 range Elist_Low_Bound .. Elist_High_Bound;
359 subtype Elmt_Range is Union_Id
360 range Elmt_Low_Bound .. Elmt_High_Bound;
362 subtype Names_Range is Union_Id
363 range Names_Low_Bound .. Names_High_Bound;
365 subtype Strings_Range is Union_Id
366 range Strings_Low_Bound .. Strings_High_Bound;
368 subtype Uint_Range is Union_Id
369 range Uint_Low_Bound .. Uint_High_Bound;
371 subtype Ureal_Range is Union_Id
372 range Ureal_Low_Bound .. Ureal_High_Bound;
374 ----------------------------
375 -- Types for Atree Package --
376 ----------------------------
378 -- Node_Id values are used to identify nodes in the tree. They are
379 -- subscripts into the Node table declared in package Tree. Note that
380 -- the special values Empty and Error are subscripts into this table,
381 -- See package Atree for further details.
383 type Node_Id is range Node_Low_Bound .. Node_High_Bound;
384 -- Type used to identify nodes in the tree
386 subtype Entity_Id is Node_Id;
387 -- A synonym for node types, used in the entity package to refer to nodes
388 -- that are entities (i.e. nodes with an Nkind of N_Defining_xxx) All such
389 -- nodes are extended nodes and these are the only extended nodes, so that
390 -- in practice entity and extended nodes are synonymous.
392 subtype Node_Or_Entity_Id is Node_Id;
393 -- A synonym for node types, used in cases where a given value may be used
394 -- to represent either a node or an entity. We like to minimize such uses
395 -- for obvious reasons of logical type consistency, but where such uses
396 -- occur, they should be documented by use of this type.
398 Empty : constant Node_Id := Node_Low_Bound;
399 -- Used to indicate null node. A node is actually allocated with this
400 -- Id value, so that Nkind (Empty) = N_Empty. Note that Node_Low_Bound
401 -- is zero, so Empty = No_List = zero.
403 Empty_List_Or_Node : constant := 0;
404 -- This constant is used in situations (e.g. initializing empty fields)
405 -- where the value set will be used to represent either an empty node
406 -- or a non-existent list, depending on the context.
408 Error : constant Node_Id := Node_Low_Bound + 1;
409 -- Used to indicate that there was an error in the source program. A node
410 -- is actually allocated at this address, so that Nkind (Error) = N_Error.
412 Empty_Or_Error : constant Node_Id := Error;
413 -- Since Empty and Error are the first two Node_Id values, the test for
414 -- N <= Empty_Or_Error tests to see if N is Empty or Error. This definition
415 -- provides convenient self-documentation for such tests.
417 First_Node_Id : constant Node_Id := Node_Low_Bound;
418 -- Subscript of first allocated node. Note that Empty and Error are both
419 -- allocated nodes, whose Nkind fields can be accessed without error.
421 ------------------------------
422 -- Types for Nlists Package --
423 ------------------------------
425 -- List_Id values are used to identify node lists in the tree. They are
426 -- subscripts into the Lists table declared in package Tree. Note that the
427 -- special value Error_List is a subscript in this table, but the value
428 -- No_List is *not* a valid subscript, and any attempt to apply list
429 -- operations to No_List will cause a (detected) error.
431 type List_Id is range List_Low_Bound .. List_High_Bound;
432 -- Type used to identify a node list
434 No_List : constant List_Id := List_High_Bound;
435 -- Used to indicate absence of a list. Note that the value is zero, which
436 -- is the same as Empty, which is helpful in initializing nodes where a
437 -- value of zero can represent either an empty node or an empty list.
439 Error_List : constant List_Id := List_Low_Bound;
440 -- Used to indicate that there was an error in the source program in a
441 -- context which would normally require a list. This node appears to be
442 -- an empty list to the list operations (a null list is actually allocated
443 -- which has this Id value).
445 First_List_Id : constant List_Id := Error_List;
446 -- Subscript of first allocated list header
448 ------------------------------
449 -- Types for Elists Package --
450 ------------------------------
452 -- Element list Id values are used to identify element lists stored in the
453 -- tree (see package Atree for further details). They are formed by adding
454 -- a bias (Element_List_Bias) to subscript values in the same array that is
455 -- used for node list headers.
457 type Elist_Id is range Elist_Low_Bound .. Elist_High_Bound;
458 -- Type used to identify an element list (Elist header table subscript)
460 No_Elist : constant Elist_Id := Elist_Low_Bound;
461 -- Used to indicate absence of an element list. Note that this is not
462 -- an actual Elist header, so element list operations on this value
465 First_Elist_Id : constant Elist_Id := No_Elist + 1;
466 -- Subscript of first allocated Elist header
468 -- Element Id values are used to identify individual elements of an
469 -- element list (see package Elists for further details).
471 type Elmt_Id is range Elmt_Low_Bound .. Elmt_High_Bound;
472 -- Type used to identify an element list
474 No_Elmt : constant Elmt_Id := Elmt_Low_Bound;
475 -- Used to represent empty element
477 First_Elmt_Id : constant Elmt_Id := No_Elmt + 1;
478 -- Subscript of first allocated Elmt table entry
480 -------------------------------
481 -- Types for Stringt Package --
482 -------------------------------
484 -- String_Id values are used to identify entries in the strings table. They
485 -- are subscripts into the strings table defined in package Strings.
487 -- Note that with only a few exceptions, which are clearly documented, the
488 -- type String_Id should be regarded as a private type. In particular it is
489 -- never appropriate to perform arithmetic operations using this type.
491 type String_Id is range Strings_Low_Bound .. Strings_High_Bound;
492 -- Type used to identify entries in the strings table
494 No_String : constant String_Id := Strings_Low_Bound;
495 -- Used to indicate missing string Id. Note that the value zero is used
496 -- to indicate a missing data value for all the Int types in this section.
498 First_String_Id : constant String_Id := No_String + 1;
499 -- First subscript allocated in string table
501 -------------------------
502 -- Character Code Type --
503 -------------------------
505 -- The type Char is used for character data internally in the compiler, but
506 -- character codes in the source are represented by the Char_Code type.
507 -- Each character literal in the source is interpreted as being one of the
508 -- 16#8000_0000 possible Wide_Wide_Character codes, and a unique Integer
509 -- Value is assigned, corresponding to the UTF_32 value, which also
510 -- corresponds to the POS value in the Wide_Wide_Character type, and also
511 -- corresponds to the POS value in the Wide_Character and Character types
512 -- for values that are in appropriate range. String literals are similarly
513 -- interpreted as a sequence of such codes.
515 type Char_Code_Base is mod 2 ** 32;
516 for Char_Code_Base'Size use 32;
518 subtype Char_Code is Char_Code_Base range 0 .. 16#7FFF_FFFF#;
519 for Char_Code'Value_Size use 32;
520 for Char_Code'Object_Size use 32;
522 function Get_Char_Code (C : Character) return Char_Code;
523 pragma Inline (Get_Char_Code);
524 -- Function to obtain internal character code from source character. For
525 -- the moment, the internal character code is simply the Pos value of the
526 -- input source character, but we provide this interface for possible
527 -- later support of alternative character sets.
529 function In_Character_Range (C : Char_Code) return Boolean;
530 pragma Inline (In_Character_Range);
531 -- Determines if the given character code is in range of type Character,
532 -- and if so, returns True. If not, returns False.
534 function In_Wide_Character_Range (C : Char_Code) return Boolean;
535 pragma Inline (In_Wide_Character_Range);
536 -- Determines if the given character code is in range of the type
537 -- Wide_Character, and if so, returns True. If not, returns False.
539 function Get_Character (C : Char_Code) return Character;
540 pragma Inline (Get_Character);
541 -- For a character C that is in Character range (see above function), this
542 -- function returns the corresponding Character value. It is an error to
543 -- call Get_Character if C is not in Character range.
545 function Get_Wide_Character (C : Char_Code) return Wide_Character;
546 -- For a character C that is in Wide_Character range (see above function),
547 -- this function returns the corresponding Wide_Character value. It is an
548 -- error to call Get_Wide_Character if C is not in Wide_Character range.
550 ---------------------------------------
551 -- Types used for Library Management --
552 ---------------------------------------
554 type Unit_Number_Type is new Int;
555 -- Unit number. The main source is unit 0, and subsidiary sources have
556 -- non-zero numbers starting with 1. Unit numbers are used to index the
557 -- file table in Lib.
559 Main_Unit : constant Unit_Number_Type := 0;
560 -- Unit number value for main unit
562 No_Unit : constant Unit_Number_Type := -1;
563 -- Special value used to signal no unit
565 type Source_File_Index is new Int range -1 .. Int'Last;
566 -- Type used to index the source file table (see package Sinput)
568 Internal_Source_File : constant Source_File_Index :=
569 Source_File_Index'First;
570 -- Value used to indicate the buffer for the source-code-like strings
571 -- internally created withing the compiler (see package Sinput)
573 No_Source_File : constant Source_File_Index := 0;
574 -- Value used to indicate no source file present
576 -----------------------------------
577 -- Representation of Time Stamps --
578 -----------------------------------
580 -- All compiled units are marked with a time stamp which is derived from
581 -- the source file (we assume that the host system has the concept of a
582 -- file time stamp which is modified when a file is modified). These
583 -- time stamps are used to ensure consistency of the set of units that
584 -- constitutes a library. Time stamps are 12 character strings with
585 -- with the following format:
590 -- MM month (2 digits 01-12)
591 -- DD day (2 digits 01-31)
592 -- HH hour (2 digits 00-23)
593 -- MM minutes (2 digits 00-59)
594 -- SS seconds (2 digits 00-59)
596 -- In the case of Unix systems (and other systems which keep the time in
597 -- GMT), the time stamp is the GMT time of the file, not the local time.
598 -- This solves problems in using libraries across networks with clients
599 -- spread across multiple time-zones.
601 Time_Stamp_Length : constant := 14;
602 -- Length of time stamp value
604 subtype Time_Stamp_Index is Natural range 1 .. Time_Stamp_Length;
605 type Time_Stamp_Type is new String (Time_Stamp_Index);
606 -- Type used to represent time stamp
608 Empty_Time_Stamp : constant Time_Stamp_Type := (others => ' ');
609 -- Value representing an empty or missing time stamp. Looks less than any
610 -- real time stamp if two time stamps are compared. Note that although this
611 -- is not private, clients should not rely on the exact way in which this
612 -- string is represented, and instead should use the subprograms below.
614 Dummy_Time_Stamp : constant Time_Stamp_Type := (others => '0');
615 -- This is used for dummy time stamp values used in the D lines for
616 -- non-existent files, and is intended to be an impossible value.
618 function "=" (Left, Right : Time_Stamp_Type) return Boolean;
619 function "<=" (Left, Right : Time_Stamp_Type) return Boolean;
620 function ">=" (Left, Right : Time_Stamp_Type) return Boolean;
621 function "<" (Left, Right : Time_Stamp_Type) return Boolean;
622 function ">" (Left, Right : Time_Stamp_Type) return Boolean;
623 -- Comparison functions on time stamps. Note that two time stamps are
624 -- defined as being equal if they have the same day/month/year and the
625 -- hour/minutes/seconds values are within 2 seconds of one another. This
626 -- deals with rounding effects in library file time stamps caused by
627 -- copying operations during installation. We have particularly noticed
628 -- that WinNT seems susceptible to such changes.
630 -- Note : the Empty_Time_Stamp value looks equal to itself, and less than
631 -- any non-empty time stamp value.
633 procedure Split_Time_Stamp
634 (TS : Time_Stamp_Type;
641 -- Given a time stamp, decompose it into its components
643 procedure Make_Time_Stamp
650 TS : out Time_Stamp_Type);
651 -- Given the components of a time stamp, initialize the value
653 -----------------------------------------------
654 -- Types used for Pragma Suppress Management --
655 -----------------------------------------------
657 type Check_Id is new Nat;
658 -- Type used to represent a check id
660 No_Check_Id : constant := 0;
661 -- Check_Id value used to indicate no check
663 Access_Check : constant := 1;
664 Accessibility_Check : constant := 2;
665 Alignment_Check : constant := 3;
666 Discriminant_Check : constant := 4;
667 Division_Check : constant := 5;
668 Elaboration_Check : constant := 6;
669 Index_Check : constant := 7;
670 Length_Check : constant := 8;
671 Overflow_Check : constant := 9;
672 Range_Check : constant := 10;
673 Storage_Check : constant := 11;
674 Tag_Check : constant := 12;
675 Validity_Check : constant := 13;
676 -- Values used to represent individual predefined checks
678 All_Checks : constant := 14;
679 -- Value used to represent All_Checks value
681 subtype Predefined_Check_Id is Check_Id range 1 .. All_Checks;
682 -- Subtype for predefined checks, including All_Checks
684 -- The following array contains an entry for each recognized check name
685 -- for pragma Suppress. It is used to represent current settings of scope
686 -- based suppress actions from pragma Suppress or command line settings.
688 -- Note: when Suppress_Array (All_Checks) is True, then generally all other
689 -- specific check entries are set True, except for the Elaboration_Check
690 -- entry which is set only if an explicit Suppress for this check is given.
691 -- The reason for this non-uniformity is that we do not want All_Checks to
692 -- suppress elaboration checking when using the static elaboration model.
693 -- We recognize only an explicit suppress of Elaboration_Check as a signal
694 -- that the static elaboration checking should skip a compile time check.
696 type Suppress_Array is array (Predefined_Check_Id) of Boolean;
697 pragma Pack (Suppress_Array);
699 -- To add a new check type to GNAT, the following steps are required:
701 -- 1. Add an entry to Snames spec and body for the new name
702 -- 2. Add an entry to the definition of Check_Id above
703 -- 3. Add a new function to Checks to handle the new check test
704 -- 4. Add a new Do_xxx_Check flag to Sinfo (if required)
705 -- 5. Add appropriate checks for the new test
707 -----------------------------------
708 -- Global Exception Declarations --
709 -----------------------------------
711 -- This section contains declarations of exceptions that are used
712 -- throughout the compiler or in other GNAT tools.
714 Unrecoverable_Error : exception;
715 -- This exception is raised to immediately terminate the compilation of the
716 -- current source program. Used in situations where things are bad enough
717 -- that it doesn't seem worth continuing (e.g. max errors reached, or a
718 -- required file is not found). Also raised when the compiler finds itself
719 -- in trouble after an error (see Comperr).
721 Terminate_Program : exception;
722 -- This exception is raised to immediately terminate the tool being
723 -- executed. Each tool where this exception may be raised must have a
724 -- single exception handler that contains only a null statement and that is
725 -- the last statement of the program. If needed, procedure Set_Exit_Status
726 -- is called with the appropriate exit status before raising
727 -- Terminate_Program.
729 ---------------------------------
730 -- Parameter Mechanism Control --
731 ---------------------------------
733 -- Function and parameter entities have a field that records the
734 -- passing mechanism. See specification of Sem_Mech for full details.
735 -- The following subtype is used to represent values of this type:
737 subtype Mechanism_Type is Int range -18 .. Int'Last;
738 -- Type used to represent a mechanism value. This is a subtype rather
739 -- than a type to avoid some annoying processing problems with certain
740 -- routines in Einfo (processing them to create the corresponding C).
742 ------------------------------
743 -- Run-Time Exception Codes --
744 ------------------------------
746 -- When the code generator generates a run-time exception, it provides a
747 -- reason code which is one of the following. This reason code is used to
748 -- select the appropriate run-time routine to be called, determining both
749 -- the exception to be raised, and the message text to be added.
751 -- The prefix CE/PE/SE indicates the exception to be raised
752 -- CE = Constraint_Error
753 -- PE = Program_Error
754 -- SE = Storage_Error
756 -- The remaining part of the name indicates the message text to be added,
757 -- where all letters are lower case, and underscores are converted to
758 -- spaces (for example CE_Invalid_Data adds the text "invalid data").
760 -- To add a new code, you need to do the following:
762 -- 1. Modify the type and subtype declarations below appropriately,
763 -- keeping things in alphabetical order.
765 -- 2. Modify the corresponding definitions in types.h, including
766 -- the definition of last_reason_code.
768 -- 3. Add a new routine in Ada.Exceptions with the appropriate call
769 -- and static string constant. Note that there is more than one
770 -- version of a-except.adb which must be modified.
772 type RT_Exception_Code is
773 (CE_Access_Check_Failed, -- 00
774 CE_Access_Parameter_Is_Null, -- 01
775 CE_Discriminant_Check_Failed, -- 02
776 CE_Divide_By_Zero, -- 03
777 CE_Explicit_Raise, -- 04
778 CE_Index_Check_Failed, -- 05
779 CE_Invalid_Data, -- 06
780 CE_Length_Check_Failed, -- 07
781 CE_Null_Exception_Id, -- 08
782 CE_Null_Not_Allowed, -- 09
783 CE_Overflow_Check_Failed, -- 10
784 CE_Partition_Check_Failed, -- 11
785 CE_Range_Check_Failed, -- 12
786 CE_Tag_Check_Failed, -- 13
788 PE_Access_Before_Elaboration, -- 14
789 PE_Accessibility_Check_Failed, -- 15
790 PE_Address_Of_Intrinsic, -- 16
791 PE_All_Guards_Closed, -- 17
792 PE_Current_Task_In_Entry_Body, -- 18
793 PE_Duplicated_Entry_Address, -- 19
794 PE_Explicit_Raise, -- 20
795 PE_Finalize_Raised_Exception, -- 21
796 PE_Implicit_Return, -- 22
797 PE_Misaligned_Address_Value, -- 23
798 PE_Missing_Return, -- 24
799 PE_Overlaid_Controlled_Object, -- 25
800 PE_Potentially_Blocking_Operation, -- 26
801 PE_Stubbed_Subprogram_Called, -- 27
802 PE_Unchecked_Union_Restriction, -- 28
803 PE_Non_Transportable_Actual, -- 29
805 SE_Empty_Storage_Pool, -- 30
806 SE_Explicit_Raise, -- 31
807 SE_Infinite_Recursion, -- 32
808 SE_Object_Too_Large); -- 33
810 subtype RT_CE_Exceptions is RT_Exception_Code range
811 CE_Access_Check_Failed ..
814 subtype RT_PE_Exceptions is RT_Exception_Code range
815 PE_Access_Before_Elaboration ..
816 PE_Non_Transportable_Actual;
818 subtype RT_SE_Exceptions is RT_Exception_Code range
819 SE_Empty_Storage_Pool ..
OSDN Git Service
