1 ------------------------------------------------------------------------------
3 -- GNAT COMPILER COMPONENTS --
9 -- Copyright (C) 1992-2010, Free Software Foundation, Inc. --
11 -- GNAT is free software; you can redistribute it and/or modify it under --
12 -- terms of the GNU General Public License as published by the Free Soft- --
13 -- ware Foundation; either version 3, or (at your option) any later ver- --
14 -- sion. GNAT is distributed in the hope that it will be useful, but WITH- --
15 -- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY --
16 -- or FITNESS FOR A PARTICULAR PURPOSE. --
18 -- As a special exception under Section 7 of GPL version 3, you are granted --
19 -- additional permissions described in the GCC Runtime Library Exception, --
20 -- version 3.1, as published by the Free Software Foundation. --
22 -- You should have received a copy of the GNU General Public License and --
23 -- a copy of the GCC Runtime Library Exception along with this program; --
24 -- see the files COPYING3 and COPYING.RUNTIME respectively. If not, see --
25 -- <http://www.gnu.org/licenses/>. --
27 -- GNAT was originally developed by the GNAT team at New York University. --
28 -- Extensive contributions were provided by Ada Core Technologies Inc. --
30 ------------------------------------------------------------------------------
32 -- This package contains global flags set by the initialization routine from
33 -- the command line and referenced throughout the compiler, the binder, or
34 -- other GNAT tools. The comments indicate which options are used by which
35 -- programs (GNAT, GNATBIND, GNATLINK, GNATMAKE, GPRMAKE, etc).
37 -- Some flags are labelled "PROJECT MANAGER". These are used by tools that
38 -- use the Project Manager. These tools include gnatmake, gnatname, the gnat
39 -- driver, gnatclean, gprbuild and gprclean.
41 with Hostparm; use Hostparm;
42 with Types; use Types;
44 pragma Warnings (Off);
45 -- This package is used also by gnatcoll
46 with System.Strings; use System.Strings;
47 with System.WCh_Con; use System.WCh_Con;
52 ----------------------
53 -- Checksum Control --
54 ----------------------
56 -- Checksums are computed for sources to check for sources being the same
57 -- from a compilation point of view (e.g. spelling of identifiers and
58 -- white space layout do not count in this computation).
60 -- The way the checksum is computed has evolved across the various versions
61 -- of GNAT. When gprbuild is called with -m, the checksums must be computed
62 -- the same way in gprbuild as it was in the GNAT version of the compiler.
63 -- The different ways are
65 -- Version 6.4 and later:
67 -- The Accumulate_Token_Checksum procedure is called after each numeric
68 -- literal and each identifier/keyword. For keywords, Tok_Identifier is
69 -- used in the call to Accumulate_Token_Checksum.
71 -- Versions 5.04 to 6.3:
73 -- For keywords, the token value were used in the call to procedure
74 -- Accumulate_Token_Checksum. Type Token_Type did not include Tok_Some.
78 -- For keywords, the token value were used in the call to
79 -- Accumulate_Token_Checksum. Type Token_Type did not include
80 -- Tok_Interface, Tok_Overriding, Tok_Synchronized and Tok_Some.
82 -- Versions 5.02 and before:
84 -- No calls to procedure Accumulate_Token_Checksum (the checksum
85 -- mechanism was introduced in version 5.03).
87 -- To signal to the scanner whether Accumulate_Token_Checksum needs to be
88 -- called and what versions to call, the following Boolean flags are used:
90 Checksum_Accumulate_Token_Checksum : Boolean := True;
92 -- Set to False by gprbuild when the version of GNAT is 5.02 or before. If
93 -- this switch is False, then we do not call Accumulate_Token_Checksum, so
94 -- the setting of the following two flags is irrelevant.
96 Checksum_GNAT_6_3 : Boolean := False;
98 -- Set to True by gprbuild when the version of GNAT is 6.3 or before.
100 Checksum_GNAT_5_03 : Boolean := False;
102 -- Set to True by gprbuild when the version of GNAT is 5.03 or before.
104 ----------------------------------------------
105 -- Settings of Modes for Current Processing --
106 ----------------------------------------------
108 -- The following mode values represent the current state of processing.
109 -- The values set here are the default values. Unless otherwise noted,
110 -- the value may be reset in Switch-? with an appropriate switch. In
111 -- some cases, the values can also be modified by pragmas, and in the
112 -- case of some binder variables, Gnatbind.Scan_Bind_Arg may modify
113 -- the default values.
115 Ada_Bind_File : Boolean := True;
116 -- GNATBIND, GNATLINK
117 -- Set True if binder file to be generated in Ada rather than C
119 type Ada_Version_Type is (Ada_83, Ada_95, Ada_2005, Ada_2012);
120 pragma Ordered (Ada_Version_Type);
121 -- Versions of Ada for Ada_Version below. Note that these are ordered,
122 -- so that tests like Ada_Version >= Ada_95 are legitimate and useful.
123 -- Think twice before using "="; Ada_Version >= Ada_2012 is more likely
124 -- what you want, because it will apply to future versions of the language.
126 Ada_Version_Default : constant Ada_Version_Type := Ada_2005;
127 pragma Warnings (Off, Ada_Version_Default);
129 -- Default Ada version if no switch given. The Warnings off is to kill
130 -- constant condition warnings.
132 -- WARNING: some scripts rely on the format of this line of code. Any
133 -- change must be coordinated with the scripts requirements.
135 Ada_Version : Ada_Version_Type := Ada_Version_Default;
137 -- Current Ada version for compiler, as set by configuration pragmas,
138 -- compiler switches, or implicitly (to Ada_Version_Runtime) when a
139 -- predefined or internal file is compiled.
141 Ada_Version_Explicit : Ada_Version_Type := Ada_Version_Default;
143 -- Like Ada_Version, but does not get set implicitly for predefined
144 -- or internal units, so it reflects the Ada version explicitly set
145 -- using configuration pragmas or compiler switches (or if neither
146 -- appears, it remains set to Ada_Version_Default). This is used in
147 -- the rare cases (notably for pragmas Preelaborate_05 and Pure_05)
148 -- where in the run-time we want the explicit version set.
150 Ada_Version_Runtime : Ada_Version_Type := Ada_2012;
152 -- Ada version used to compile the runtime. Used to set Ada_Version (but
153 -- not Ada_Version_Explicit) when compiling predefined or internal units.
155 Ada_Final_Suffix : constant String := "final";
156 Ada_Final_Name : String_Ptr := new String'("ada" & Ada_Final_Suffix);
158 -- The name of the procedure that performs the finalization at the end of
159 -- execution. This variable may be modified by Gnatbind.Scan_Bind_Arg.
161 Ada_Init_Suffix : constant String := "init";
162 Ada_Init_Name : String_Ptr := new String'("ada" & Ada_Init_Suffix);
164 -- The name of the procedure that performs initialization at the start
165 -- of execution. This variable may be modified by Gnatbind.Scan_Bind_Arg.
167 Ada_Main_Name_Suffix : constant String := "main";
169 -- The suffix for Ada_Main_Name. Defined as a constant here so that it
170 -- can be referenced in a uniform manner to create either the default
171 -- value of Ada_Main_Name (declared below), or the non-default name
172 -- set by Gnatbind.Scan_Bind_Arg.
174 Ada_Main_Name : String_Ptr := new String'("ada_" & Ada_Main_Name_Suffix);
176 -- The name of the Ada package generated by the binder (when in Ada mode).
177 -- This variable may be modified by Gnatbind.Scan_Bind_Arg.
179 Address_Clause_Overlay_Warnings : Boolean := True;
181 -- Set False to disable address clause warnings
183 Address_Is_Private : Boolean := False;
185 -- Set True if package System has the line "type Address is private;"
187 All_Errors_Mode : Boolean := False;
189 -- Flag set to force display of multiple errors on a single line and
190 -- also repeated error messages for references to undefined identifiers
191 -- and certain other repeated error messages. Set by use of -gnatf.
193 All_Sources : Boolean := False;
195 -- Set to True to require all source files to be present. This flag is
196 -- directly modified by gnatmake to affect the shared binder routines.
198 Alternate_Main_Name : String_Ptr := null;
200 -- Set to non null when Bind_Alternate_Main_Name is True. This value
201 -- is modified as needed by Gnatbind.Scan_Bind_Arg.
203 ASIS_Mode : Boolean := False;
205 -- Enable semantic checks and tree transformations that are important
206 -- for ASIS but that are usually skipped if Operating_Mode is set to
207 -- Check_Semantics. This flag does not have the corresponding option to set
208 -- it ON. It is set ON when Tree_Output is set ON, it can also be set ON
209 -- from the code of GNSA-based tool (a client may need to set ON the
210 -- Back_Annotate_Rep_Info flag in this case. At the moment this does not
211 -- make very much sense, because GNSA cannot do back annotation).
213 Assertions_Enabled : Boolean := False;
215 -- Enable assertions made using pragma Assert
217 Assume_No_Invalid_Values : Boolean := False;
219 -- Normally, in accordance with (RM 13.9.1 (9-11)) the front end assumes
220 -- that values could have invalid representations, unless it can clearly
221 -- prove that the values are valid. If this switch is set (by -gnatB or by
222 -- pragma Assume_No_Invalid_Values (Off)), then the compiler assumes values
223 -- are valid and in range of their representations. This feature is now
224 -- fully enabled in the compiler.
226 Back_Annotate_Rep_Info : Boolean := False;
228 -- If set True, enables back annotation of representation information
229 -- by gigi, even in -gnatc mode. This is set True by the use of -gnatR
230 -- (list representation information) or -gnatt (generate tree). It is
231 -- also set true if certain Unchecked_Conversion instantiations require
232 -- checking based on annotated values.
234 Back_End_Handles_Limited_Types : Boolean;
235 -- This flag is set true if the back end can properly handle limited or
236 -- other by reference types, and avoid copies. If this flag is False, then
237 -- the front end does special expansion for conditional expressions to make
238 -- sure that no copy occurs. If the flag is True, then the expansion for
239 -- conditional expressions relies on the back end properly handling things.
240 -- Currently the default is False for all cases (set in gnat1drv). The
241 -- default can be modified using -gnatd.L (sets the flag True).
243 Bind_Alternate_Main_Name : Boolean := False;
245 -- True if main should be called Alternate_Main_Name.all.
246 -- This variable may be set to True by Gnatbind.Scan_Bind_Arg.
248 Bind_Main_Program : Boolean := True;
250 -- Set to False if not binding main Ada program
252 Bind_For_Library : Boolean := False;
254 -- Set to True if the binder needs to generate a file designed for building
255 -- a library. May be set to True by Gnatbind.Scan_Bind_Arg.
257 Bind_Only : Boolean := False;
258 -- GNATMAKE, GPRMAKE, GPRBUILD
259 -- Set to True to skip compile and link steps
260 -- (except when Compile_Only and/or Link_Only are True).
262 Blank_Deleted_Lines : Boolean := False;
264 -- Output empty lines for each line of preprocessed input that is deleted
265 -- in the output, including preprocessor lines starting with a '#'.
267 Brief_Output : Boolean := False;
269 -- Force brief error messages to standard error, even if verbose mode is
270 -- set (so that main error messages go to standard output).
272 Build_Bind_And_Link_Full_Project : Boolean := False;
274 -- Set to True to build, bind and link all the sources of a project file
277 Check_Object_Consistency : Boolean := False;
278 -- GNATBIND, GNATMAKE
279 -- Set to True to check whether every object file is consistent with
280 -- its corresponding ada library information (ALI) file. An object
281 -- file is inconsistent with the corresponding ALI file if the object
282 -- file does not exist or if it has an older time stamp than the ALI file.
283 -- Default above is for GNATBIND. GNATMAKE overrides this default to
284 -- True (see Make.Initialize) since we normally do need to check source
285 -- consistencies in gnatmake.
287 Check_Only : Boolean := False;
289 -- Set to True to do checks only, no output of binder file
291 Check_Policy_List : Node_Id := Empty;
293 -- This points to the list of N_Pragma nodes for Check_Policy pragmas
294 -- that are linked through the Next_Pragma fields, with the list being
295 -- terminated by Empty. The order is most recently processed first. Note
296 -- that Push_Scope and Pop_Scope in Sem_Ch8 save and restore the value
297 -- of this variable, implementing the required scope control for pragmas
298 -- appearing a declarative part.
300 Check_Readonly_Files : Boolean := False;
302 -- Set to True to check readonly files during the make process
304 Check_Source_Files : Boolean := True;
305 -- GNATBIND, GNATMAKE
306 -- Set to True to enable consistency checking for any source files that
307 -- are present (i.e. date must match the date in the library info file).
308 -- Set to False for object file consistency check only. This flag is
309 -- directly modified by gnatmake, to affect the shared binder routines.
311 Check_Switches : Boolean := False;
312 -- GNATMAKE, GPRMAKE, GPBUILD
313 -- Set to True to check compiler options during the make process
315 Check_Unreferenced : Boolean := False;
317 -- Set to True to enable checking for unreferenced entities other
318 -- than formal parameters (for which see Check_Unreferenced_Formals)
320 Check_Unreferenced_Formals : Boolean := False;
322 -- Set True to check for unreferenced formals. This is turned on by
323 -- -gnatwa/wf/wu and turned off by -gnatwA/wF/wU.
325 Check_Withs : Boolean := False;
327 -- Set to True to enable checking for unused withs, and also the case
328 -- of withing a package and using none of the entities in the package.
330 CodePeer_Mode : Boolean := False;
332 -- Enable full CodePeer mode (SCIL generation, disable switches that
333 -- interact badly with it, etc...).
335 Commands_To_Stdout : Boolean := False;
337 -- True if echoed commands to be written to stdout instead of stderr
339 Comment_Deleted_Lines : Boolean := False;
341 -- True if source lines removed by the preprocessor should be commented
342 -- in the output file.
344 Compile_Only : Boolean := False;
345 -- GNATMAKE, GNATCLEAN, GPRMAKE, GPBUILD, GPRCLEAN
346 -- GNATMAKE, GPRMAKE, GPRMAKE:
347 -- set to True to skip bind and link steps (except when Bind_Only is
349 -- GNATCLEAN, GPRCLEAN:
350 -- set to True to delete only the files produced by the compiler but not
351 -- the library files or the executable files.
353 Config_File : Boolean := True;
355 -- Set to False to inhibit reading and processing of gnat.adc file
357 Config_File_Names : String_List_Access := null;
359 -- Names of configuration pragmas files (given by switches -gnatec)
361 Configurable_Run_Time_Mode : Boolean := False;
363 -- Set True if the compiler is operating in configurable run-time mode.
364 -- This happens if the flag Targparm.Configurable_Run_TimeMode_On_Target
365 -- is set True, or if pragma No_Run_Time is used. See the spec of Rtsfind
366 -- for details on the handling of the latter pragma.
368 Constant_Condition_Warnings : Boolean := False;
370 -- Set to True to activate warnings on constant conditions
372 Create_Mapping_File : Boolean := False;
374 -- Set to True (-C switch) to indicate that the compiler will be invoked
375 -- with a mapping file (-gnatem compiler switch).
377 Debug_Pragmas_Enabled : Boolean := False;
379 -- Enable debug statements from pragma Debug
381 subtype Debug_Level_Value is Nat range 0 .. 3;
382 Debugger_Level : Debug_Level_Value := 0;
384 -- The value given to the -g parameter. The default value for -g with
385 -- no value is 2. This is usually ignored by GNATBIND, except in the
386 -- VMS version where it is passed as an argument to __gnat_initialize
387 -- to trigger the activation of the remote debugging interface.
388 -- Is this still true ???
390 Debug_Generated_Code : Boolean := False;
392 -- Set True (-gnatD switch) to debug generated expanded code instead
393 -- of the original source code. Causes debugging information to be
394 -- written with respect to the generated code file that is written.
396 Default_Exit_Status : Int := 0;
398 -- Set the default exit status value. Set by the -Xnnn switch for the
401 Default_Stack_Size : Int := -1;
403 -- Set to default primary stack size in units of bytes. Set by
404 -- the -dnnn switch for the binder. A value of -1 indicates that no
405 -- default was set by the binder.
407 Default_Sec_Stack_Size : Int := -1;
409 -- Set to default secondary stack size in units of bytes. Set by
410 -- the -Dnnn switch for the binder. A value of -1 indicates that no
411 -- default was set by the binder, and that the default should be the
412 -- initial value of System.Secondary_Stack.Default_Secondary_Stack_Size.
414 Default_Pool : Node_Id := Empty;
416 -- Used to record the storage pool name (or null literal) that is the
417 -- argument of an applicable pragma Default_Storage_Pool.
418 -- Empty: No pragma Default_Storage_Pool applies.
419 -- N_Null node: "pragma Default_Storage_Pool (null);" applies.
420 -- otherwise: "pragma Default_Storage_Pool (X);" applies, and
421 -- this points to the name X.
422 -- Push_Scope and Pop_Scope in Sem_Ch8 save and restore this value.
424 Detect_Blocking : Boolean := False;
426 -- Set True to force the run time to raise Program_Error if calls to
427 -- potentially blocking operations are detected from protected actions.
429 Display_Compilation_Progress : Boolean := False;
430 -- GNATMAKE, GPRMAKE, GPRBUILD
431 -- Set True (-d switch) to display information on progress while compiling
432 -- files. Internal flag to be used in conjunction with an IDE (e.g GPS).
434 type Distribution_Stub_Mode_Type is
437 -- Normal mode, no generation/compilation of distribution stubs
439 Generate_Receiver_Stub_Body,
440 -- The unit being compiled is the RCI body, and the compiler will
441 -- generate the body for the receiver stubs and compile it.
443 Generate_Caller_Stub_Body);
444 -- The unit being compiled is the RCI spec, and the compiler will
445 -- generate the body for the caller stubs and compile it.
447 Distribution_Stub_Mode : Distribution_Stub_Mode_Type := No_Stubs;
449 -- This enumeration variable indicates the five states of distribution
450 -- annex stub generation/compilation.
452 Do_Not_Execute : Boolean := False;
454 -- Set to True if no actual compilations should be undertaken.
456 Dump_Source_Text : Boolean := False;
458 -- Set to True (by -gnatL) to dump source text intermingled with generated
459 -- code. Effective only if either of Debug/Print_Generated_Code is true.
461 Dynamic_Elaboration_Checks : Boolean := False;
463 -- Set True for dynamic elaboration checking mode, as set by the -gnatE
464 -- switch or by the use of pragma Elaboration_Checks (Dynamic).
466 Dynamic_Stack_Measurement : Boolean := False;
468 -- Set True to enable dynamic stack measurement (-u flag for gnatbind)
470 Dynamic_Stack_Measurement_Array_Size : Nat := 100;
472 -- Number of measurements we want to store during dynamic stack analysis.
473 -- When the buffer is full, non-storable results will be output on the fly.
474 -- The value is relevant only if Dynamic_Stack_Measurement is set. Set
475 -- by processing of -u flag for gnatbind.
477 Elab_Dependency_Output : Boolean := False;
479 -- Set to True to output complete list of elaboration constraints
481 Elab_Order_Output : Boolean := False;
483 -- Set to True to output chosen elaboration order
485 Elab_Warnings : Boolean := False;
487 -- Set to True to generate full elaboration warnings (-gnatwl)
489 Enable_Overflow_Checks : Boolean := False;
491 -- Set to True if -gnato (enable overflow checks) switch is set,
494 Error_Msg_Line_Length : Nat := 0;
496 -- Records the error message line length limit. If this is set to zero,
497 -- then we get the old style behavior, in which each call to the error
498 -- message routines generates one line of output as a separate message.
499 -- If it is set to a non-zero value, then continuation lines are folded
500 -- to make a single long message, and then this message is split up into
501 -- multiple lines not exceeding the specified length. Set by -gnatj=nn.
503 Exception_Handler_Encountered : Boolean := False;
505 -- This flag is set true if the parser encounters an exception handler.
506 -- It is used to set Warn_On_Exception_Propagation True if the restriction
507 -- No_Exception_Propagation is set.
509 Exception_Extra_Info : Boolean := False;
511 -- True when switch -gnateE is used. When True, generate extra information
512 -- associated with exception messages (in particular range and index
515 Exception_Locations_Suppressed : Boolean := False;
517 -- Set to True if a Suppress_Exception_Locations configuration pragma is
520 type Exception_Mechanism_Type is
521 -- Determines the handling of exceptions. See Exp_Ch11 for details
523 (Front_End_Setjmp_Longjmp_Exceptions,
524 -- Exceptions use setjmp/longjmp generated explicitly by the
525 -- front end (this includes gigi or other equivalent parts of
526 -- the code generator). AT END handlers are converted into
527 -- exception handlers by the front end in this mode.
529 Back_End_Exceptions);
530 -- Exceptions are handled by the back end. The front end simply
531 -- generates the handlers as they appear in the source, and AT
532 -- END handlers are left untouched (they are not converted into
533 -- exception handlers when operating in this mode.
534 pragma Convention (C, Exception_Mechanism_Type);
536 Exception_Mechanism : Exception_Mechanism_Type :=
537 Front_End_Setjmp_Longjmp_Exceptions;
539 -- Set to the appropriate value depending on the default as given in
540 -- system.ads (ZCX_By_Default, GCC_ZCX_Support). The C convention is there
541 -- to make this variable accessible to gigi.
543 Exception_Tracebacks : Boolean := False;
545 -- Set to True to store tracebacks in exception occurrences (-E)
547 Extensions_Allowed : Boolean := False;
549 -- Set to True by switch -gnatX if GNAT specific language extensions
550 -- are allowed. For example, the use of 'Constrained with objects of
551 -- generic types is a GNAT extension.
553 type External_Casing_Type is (
554 As_Is, -- External names cased as they appear in the Ada source
555 Uppercase, -- External names forced to all uppercase letters
556 Lowercase); -- External names forced to all lowercase letters
558 External_Name_Imp_Casing : External_Casing_Type := Lowercase;
560 -- The setting of this flag determines the casing of external names
561 -- when the name is implicitly derived from an entity name (i.e. either
562 -- no explicit External_Name or Link_Name argument is used, or, in the
563 -- case of extended DEC pragmas, the external name is given using an
564 -- identifier. The As_Is setting is not permitted here (since this would
565 -- create Ada source programs that were case sensitive).
567 External_Name_Exp_Casing : External_Casing_Type := As_Is;
569 -- The setting of this flag determines the casing of an external name
570 -- specified explicitly with a string literal. As_Is means the string
571 -- literal is used as given with no modification to the casing. If
572 -- Lowercase or Uppercase is set, then the string is forced to all
573 -- lowercase or all uppercase letters as appropriate. Note that this
574 -- setting has no effect if the external name is given using an identifier
575 -- in the case of extended DEC import/export pragmas (in this case the
576 -- casing is controlled by External_Name_Imp_Casing), and also has no
577 -- effect if an explicit Link_Name is supplied (a link name is always
578 -- used exactly as given).
580 External_Unit_Compilation_Allowed : Boolean := False;
582 -- When True (set by gnatmake switch -x), allow compilation of sources
583 -- that are not part of any project file.
585 Fast_Math : Boolean := False;
587 -- Indicates the current setting of Fast_Math mode, as set by the use
588 -- of a Fast_Math pragma (set on by Fast_Math (On)).
590 Float_Format : Character := ' ';
592 -- A non-blank value indicates that a Float_Format pragma has been
593 -- processed, in which case this variable is set to 'I' for IEEE or
594 -- to 'V' for VAX. The setting of 'V' is only possible on OpenVMS
597 Float_Format_Long : Character := ' ';
599 -- A non-blank value indicates that a Long_Float pragma has been
600 -- processed (this pragma is recognized only in OpenVMS versions
601 -- of GNAT), in which case this variable is set to D or G for
602 -- D_Float or G_Float.
604 Force_ALI_Tree_File : Boolean := False;
606 -- Force generation of ALI file even if errors are encountered.
607 -- Also forces generation of tree file if -gnatt is also set.
609 Force_Checking_Of_Elaboration_Flags : Boolean := False;
611 -- True if binding with forced checking of the elaboration flags
614 Force_Compilations : Boolean := False;
615 -- GNATMAKE, GPRMAKE, GPRBUILD
616 -- Set to force recompilations even when the objects are up-to-date.
618 Full_Path_Name_For_Brief_Errors : Boolean := False;
620 -- When True, in Brief_Output mode, each error message line
621 -- will start with the full path name of the source.
622 -- When False, only the file name without directory information
625 Full_List : Boolean := False;
627 -- Set True to generate full source listing with embedded errors
629 Full_List_File_Name : String_Ptr := null;
631 -- Set to file name to generate full source listing to named file (or if
632 -- the name is of the form .xxx, then to name.xxx where name is the source
633 -- file name with extension stripped.
635 Generate_Processed_File : Boolean := False;
637 -- True when switch -gnateG is used. When True, create in a file
638 -- <source>.prep, if the source is preprocessed.
640 Generate_SCO : Boolean := False;
642 -- True when switch -gnateS is used. When True, Source Coverage Obligation
643 -- (SCO) information is generated and output in the ALI file. See unit
644 -- Par_SCO for full details.
646 Generating_Code : Boolean := False;
648 -- True if the frontend finished its work and has called the backend to
649 -- process the tree and generate the object file.
651 Global_Discard_Names : Boolean := False;
653 -- True if a pragma Discard_Names appeared as a configuration pragma for
654 -- the current compilation unit.
656 GNAT_Mode : Boolean := False;
658 -- True if compiling in GNAT system mode (-gnatg switch)
660 Heap_Size : Nat := 0;
662 -- Heap size for memory allocations. Valid values are 32 and 64. Only
665 HLO_Active : Boolean := False;
667 -- True if High Level Optimizer is activated (-gnatH switch)
669 Identifier_Character_Set : Character;
671 -- This variable indicates the character set to be used for identifiers.
672 -- The possible settings are:
673 -- '1' Latin-5 (ISO-8859-1)
674 -- '2' Latin-5 (ISO-8859-2)
675 -- '3' Latin-5 (ISO-8859-3)
676 -- '4' Latin-5 (ISO-8859-4)
677 -- '5' Latin-5 (ISO-8859-5, Cyrillic)
678 -- '9' Latin-5 (ISO-8859-9)
679 -- 'p' PC (US, IBM page 437)
680 -- '8' PC (European, IBM page 850)
681 -- 'f' Full upper set (all distinct)
682 -- 'n' No upper characters (Ada 83 rules)
683 -- 'w' Latin-1 plus wide characters allowed in identifiers
685 -- The setting affects the set of letters allowed in identifiers and the
686 -- upper/lower case equivalences. It does not affect the interpretation of
687 -- character and string literals, which are always stored using the actual
688 -- coding in the source program. This variable is initialized to the
689 -- default value appropriate to the system (in Osint.Initialize), and then
690 -- reset if a command line switch is used to change the setting.
692 Ignore_Rep_Clauses : Boolean := False;
694 -- Set True to ignore all representation clauses. Useful when compiling
695 -- code from foreign compilers for checking or ASIS purposes. Can be
696 -- set True by use of -gnatI.
698 Implementation_Unit_Warnings : Boolean := True;
700 -- Set True to active warnings for use of implementation internal units.
701 -- Can be controlled by use of -gnatwi/-gnatwI.
703 Implicit_Packing : Boolean := False;
705 -- If set True, then a Size attribute clause on an array is allowed to
706 -- cause implicit packing instead of generating an error message. Set by
707 -- use of pragma Implicit_Packing.
709 Ineffective_Inline_Warnings : Boolean := False;
711 -- Set True to activate warnings if front-end inlining (-gnatN) is not
712 -- able to actually inline a particular call (or all calls). Can be
713 -- controlled by use of -gnatwp/-gnatwP.
715 Init_Or_Norm_Scalars : Boolean := False;
717 -- Set True if a pragma Initialize_Scalars applies to the current unit.
718 -- Also set True if a pragma Normalize_Scalars applies.
720 Initialize_Scalars : Boolean := False;
722 -- Set True if a pragma Initialize_Scalars applies to the current unit.
723 -- Note that Init_Or_Norm_Scalars is also set to True if this is True.
725 Initialize_Scalars_Mode1 : Character := 'I';
726 Initialize_Scalars_Mode2 : Character := 'N';
728 -- Set to two characters from -S switch (IN/LO/HI/EV/xx). The default
729 -- is IN (invalid values), used if no -S switch is used.
731 Inline_Active : Boolean := False;
733 -- Set True to activate pragma Inline processing across modules. Default
734 -- for now is not to inline across module boundaries.
736 Interface_Library_Unit : Boolean := False;
738 -- Set to True to indicate that at least one ALI file is an interface ALI:
739 -- then elaboration flag checks are to be generated in the binder
742 Generate_SCIL : Boolean := False;
744 -- Set True to activate SCIL code generation.
746 Invalid_Value_Used : Boolean := False;
748 -- Set True if a valid Invalid_Value attribute is encountered
750 Follow_Links_For_Files : Boolean := False;
752 -- Set to True (-eL) to process the project files in trusted mode. If
753 -- Follow_Links is False, it is assumed that the project doesn't contain
754 -- any file duplicated through symbolic links (although the latter are
755 -- still valid if they point to a file which is outside of the project),
756 -- and that no directory has a name which is a valid source name.
758 Follow_Links_For_Dirs : Boolean := False;
760 -- Set to True if directories can be links in this project, and therefore
761 -- additional system calls must be performed to ensure that we always see
762 -- the same full name for each directory.
764 Front_End_Inlining : Boolean := False;
766 -- Set True to activate inlining by front-end expansion
768 Inline_Processing_Required : Boolean := False;
770 -- Set True if inline processing is required. Inline processing is required
771 -- if an active Inline pragma is processed. The flag is set for a pragma
772 -- Inline or Inline_Always that is actually active.
774 In_Place_Mode : Boolean := False;
776 -- Set True to store ALI and object files in place i.e. in the object
777 -- directory if these files already exist or in the source directory
780 Keep_Going : Boolean := False;
781 -- GNATMAKE, GPRMAKE, GPRBUILD
782 -- When True signals to ignore compilation errors and keep processing
783 -- sources until there is no more work.
785 Keep_Temporary_Files : Boolean := False;
787 -- When True the temporary files created by the GNAT driver are not
788 -- deleted. Set by switch -dn or qualifier /KEEP_TEMPORARY_FILES.
790 Leap_Seconds_Support : Boolean := False;
792 -- Set to True to enable leap seconds support in Ada.Calendar and its
795 Link_Only : Boolean := False;
796 -- GNATMAKE, GPRMAKE, GPRBUILD
797 -- Set to True to skip compile and bind steps (except when Bind_Only is
800 List_Inherited_Aspects : Boolean := True;
802 -- List inherited invariants, preconditions, and postconditions from
803 -- Invariant'Class, Pre'Class, and Post'Class aspects.
805 List_Restrictions : Boolean := False;
807 -- Set to True to list restrictions pragmas that could apply to partition
809 List_Units : Boolean := False;
811 -- List units in the active library for a compilation (-gnatu switch)
813 List_Closure : Boolean := False;
815 -- List all sources in the closure of a main (-R gnatbind switch)
817 List_Dependencies : Boolean := False;
819 -- When True gnatmake verifies that the objects are up to date and
820 -- outputs the list of object dependencies (-M switch).
821 -- Output depends if -a switch is used or not.
822 -- This list can be used directly in a Makefile.
824 List_Representation_Info : Int range 0 .. 3 := 0;
826 -- Set non-zero by -gnatR switch to list representation information.
827 -- The settings are as follows:
829 -- 0 = no listing of representation information (default as above)
830 -- 1 = list rep info for user defined record and array types
831 -- 2 = list rep info for all user defined types and objects
832 -- 3 = like 2, but variable fields are decoded symbolically
834 List_Representation_Info_To_File : Boolean := False;
836 -- Set true by -gnatRs switch. Causes information from -gnatR/1/2/3 to be
837 -- written to file.rep (where file is the name of the source file) instead
838 -- of stdout. For example, if file x.adb is compiled using -gnatR2s then
839 -- representation info is written to x.adb.ref.
841 List_Representation_Info_Mechanisms : Boolean := False;
843 -- Set true by -gnatRm switch. Causes information on mechanisms to be
844 -- included in the representation output information.
846 List_Preprocessing_Symbols : Boolean := False;
848 -- Set to True if symbols for preprocessing a source are to be listed
849 -- before preprocessing occurs. Set to True by switch -s of gnatprep or
850 -- -s in preprocessing data file for the compiler.
852 type Create_Repinfo_File_Proc is access procedure (Src : String);
853 type Write_Repinfo_Line_Proc is access procedure (Info : String);
854 type Close_Repinfo_File_Proc is access procedure;
855 -- Types used for procedure addresses below
857 Create_Repinfo_File_Access : Create_Repinfo_File_Proc := null;
858 Write_Repinfo_Line_Access : Write_Repinfo_Line_Proc := null;
859 Close_Repinfo_File_Access : Close_Repinfo_File_Proc := null;
861 -- These three locations are left null when operating in non-compiler (e.g.
862 -- ASIS mode), but when operating in compiler mode, they are set to point
863 -- to the three corresponding procedures in Osint-C. The reason for this
864 -- slightly strange interface is to stop Repinfo from dragging in Osint in
865 -- ASIS mode, which would include lots of unwanted units in the ASIS build.
867 type Create_List_File_Proc is access procedure (S : String);
868 type Write_List_Info_Proc is access procedure (S : String);
869 type Close_List_File_Proc is access procedure;
870 -- Types used for procedure addresses below
872 Create_List_File_Access : Create_List_File_Proc := null;
873 Write_List_Info_Access : Write_List_Info_Proc := null;
874 Close_List_File_Access : Close_List_File_Proc := null;
876 -- These three locations are left null when operating in non-compiler
877 -- (e.g. from the binder), but when operating in compiler mode, they are
878 -- set to point to the three corresponding procedures in Osint-C. The
879 -- reason for this slightly strange interface is to prevent Repinfo
880 -- from dragging in Osint-C in the binder, which would include unwanted
881 -- units in the binder.
883 Locking_Policy : Character := ' ';
885 -- Set to ' ' for the default case (no locking policy specified). Reset to
886 -- first character (uppercase) of locking policy name if a valid pragma
887 -- Locking_Policy is encountered.
889 Locking_Policy_Sloc : Source_Ptr := No_Location;
891 -- Remember location of previous Locking_Policy pragma. This is used for
892 -- inconsistency error messages. A value of System_Location is used if the
893 -- policy is set in package System.
895 Look_In_Primary_Dir : Boolean := True;
896 -- GNAT, GNATBIND, GNATMAKE, GNATCLEAN
897 -- Set to False if a -I- was present on the command line. When True we are
898 -- allowed to look in the primary directory to locate other source or
901 Make_Steps : Boolean := False;
903 -- Set to True when either Compile_Only, Bind_Only or Link_Only is
906 Main_Index : Int := 0;
908 -- This is set to non-zero by gnatmake switch -eInnn to indicate that
909 -- the main program is the nnn unit in a multi-unit source file.
911 Mapping_File_Name : String_Ptr := null;
913 -- File name of mapping between unit names, file names and path names.
914 -- (given by switch -gnatem)
916 Maximum_Messages : Int := 9999;
918 -- Maximum default number of errors before compilation is terminated, or in
919 -- the case of GNAT, maximum number of warnings before further warnings are
920 -- suppressed. Can be overridden by -gnatm (GNAT) or -m (GNATBIND) switch.
922 Maximum_File_Name_Length : Int;
924 -- Maximum number of characters allowed in a file name, not counting the
925 -- extension, as set by the appropriate switch. If no switch is given,
926 -- then this value is initialized by Osint to the appropriate value.
928 Maximum_Processes : Positive := 1;
929 -- GNATMAKE, GPRMAKE, GPRBUILD
930 -- Maximum number of processes that should be spawned to carry out
933 Minimal_Recompilation : Boolean := False;
935 -- Set to True if minimal recompilation mode requested
937 Special_Exception_Package_Used : Boolean := False;
939 -- Set to True if either of the unit GNAT.Most_Recent_Exception or
940 -- GNAT.Exception_Traces is with'ed. Used to inhibit transformation of
941 -- local raise statements into gotos in the presence of either package.
943 Multiple_Unit_Index : Int;
945 -- This is set non-zero if the current unit is being compiled in multiple
946 -- unit per file mode, meaning that the current unit is selected from the
947 -- sequence of units in the current source file, using the value stored
948 -- in this variable (e.g. 2 = select second unit in file). A value of
949 -- zero indicates that we are in normal (one unit per file) mode.
951 No_Main_Subprogram : Boolean := False;
952 -- GNATMAKE, GNATBIND
953 -- Set to True if compilation/binding of a program without main
954 -- subprogram requested.
956 No_Run_Time_Mode : Boolean := False;
958 -- This flag is set True if a No_Run_Time pragma is encountered. See
959 -- spec of Rtsfind for a full description of handling of this pragma.
961 No_Split_Units : Boolean := False;
963 -- Set to True with switch --no-split-units. When True, unit sources, spec,
964 -- body and subunits, must all be in the same project.This is checked after
967 No_Stdinc : Boolean := False;
968 -- GNAT, GNATBIND, GNATMAKE, GNATFIND, GNATXREF
969 -- Set to True if no default source search dirs added to search list
971 No_Stdlib : Boolean := False;
972 -- GNATMAKE, GNATBIND, GNATFIND, GNATXREF
973 -- Set to True if no default library search dirs added to search list
975 No_Strict_Aliasing : Boolean := False;
977 -- Set True if pragma No_Strict_Aliasing with no parameters encountered
979 Normalize_Scalars : Boolean := False;
981 -- Set True if a pragma Normalize_Scalars applies to the current unit.
982 -- Note that Init_Or_Norm_Scalars is also set to True if this is True.
984 Object_Directory_Present : Boolean := False;
986 -- Set to True when an object directory is specified with option -D
988 One_Compilation_Per_Obj_Dir : Boolean := False;
989 -- GNATMAKE, GPRBUILD
990 -- Set to True with switch --single-compile-per-obj-dir. When True, there
991 -- cannot be simultaneous compilations with the object files in the same
992 -- object directory, if project files are used.
994 type Operating_Mode_Type is (Check_Syntax, Check_Semantics, Generate_Code);
995 Operating_Mode : Operating_Mode_Type := Generate_Code;
997 -- Indicates the operating mode of the compiler. The default is generate
998 -- code, which runs the parser, semantics and backend. Switches can be
999 -- used to set syntax checking only mode, or syntax and semantics checking
1000 -- only mode. Operating_Mode can also be modified as a result of detecting
1001 -- errors during the compilation process. In particular if any serious
1002 -- error is detected then this flag is reset from Generate_Code to
1003 -- Check_Semantics after generating an error message.
1005 Optimize_Alignment : Character := 'O';
1006 -- Setting of Optimize_Alignment, set to T/S/O for time/space/off. Can
1007 -- be modified by use of pragma Optimize_Alignment.
1009 Optimize_Alignment_Local : Boolean := False;
1010 -- Set True if Optimize_Alignment mode is set by a local configuration
1011 -- pragma that overrides the gnat.adc (or other configuration file) default
1012 -- so that the unit is not dependent on the default setting. Also always
1013 -- set True for internal units, since these always have a default setting
1014 -- of Optimize_Alignment (Off) that is enforced (essentially equivalent to
1015 -- them all having such an explicit pragma in each unit).
1017 Original_Operating_Mode : Operating_Mode_Type := Generate_Code;
1019 -- Indicates the original operating mode of the compiler as set by compiler
1020 -- options. This is identical to Operating_Mode except that this is not
1021 -- affected by errors.
1023 Optimization_Level : Int;
1024 pragma Import (C, Optimization_Level, "optimize");
1025 -- Constant reflecting the optimization level (0,1,2,3 for -O0,-O1,-O2,-O3)
1026 -- See jmissing.c and aamissing.c for definitions for dotnet/jgnat and
1027 -- GNAAMP back ends.
1029 Optimize_Size : Int;
1030 pragma Import (C, Optimize_Size, "optimize_size");
1031 -- Constant reflecting setting of -Os (optimize for size). Set to nonzero
1032 -- in -Os mode and set to zero otherwise. See jmissing.c and aamissing.c
1033 -- for definitions of "optimize_size" for dotnet/jgnat and GNAAMP backends
1035 Output_File_Name_Present : Boolean := False;
1036 -- GNATBIND, GNAT, GNATMAKE, GPRMAKE
1037 -- Set to True when the output C file name is given with option -o for
1038 -- GNATBIND, when the object file name is given with option -gnatO for GNAT
1039 -- or when the executable is given with option -o for GNATMAKE or GPRMAKE.
1041 Output_Linker_Option_List : Boolean := False;
1043 -- True if output of list of linker options is requested (-K switch set)
1045 Output_ALI_List : Boolean := False;
1046 ALI_List_Filename : String_Ptr;
1048 -- True if output of list of ALIs is requested (-A switch set). List is
1049 -- output under the given filename, or standard output if not specified.
1051 Output_Object_List : Boolean := False;
1052 Object_List_Filename : String_Ptr;
1054 -- True if output of list of objects is requested (-O switch set). List is
1055 -- output under the given filename, or standard output if not specified.
1057 Overflow_Checks_Unsuppressed : Boolean := False;
1059 -- Set to True if at least one occurrence of pragma Unsuppress
1060 -- (All_Checks|Overflow_Checks) has been processed.
1062 Persistent_BSS_Mode : Boolean := False;
1064 -- True if a Persistent_BSS configuration pragma is in effect, causing
1065 -- potentially persistent data to be placed in the persistent_bss section.
1067 Pessimistic_Elab_Order : Boolean := False;
1069 -- True if pessimistic elaboration order is to be chosen (-p switch set)
1071 Polling_Required : Boolean := False;
1073 -- Set to True if polling for asynchronous abort is enabled by using
1074 -- the -gnatP option for GNAT.
1076 Preprocessing_Data_File : String_Ptr := null;
1078 -- Set by switch -gnatep=. The file name of the preprocessing data file.
1080 Print_Generated_Code : Boolean := False;
1082 -- Set to True to enable output of generated code in source form. This
1083 -- flag is set by the -gnatG switch.
1085 Print_Standard : Boolean := False;
1087 -- Set to true to enable printing of package standard in source form.
1088 -- This flag is set by the -gnatS switch
1090 Propagate_Exceptions : Boolean := False;
1092 -- Indicates if subprogram descriptor exception tables should be
1093 -- built for imported subprograms. Set True if a Propagate_Exceptions
1094 -- pragma applies to the extended main unit.
1096 type Usage is (Unknown, Not_In_Use, In_Use);
1097 Project_File_In_Use : Usage := Unknown;
1099 -- Indicates if a project file is used or not. Set to In_Use by the first
1102 Queuing_Policy : Character := ' ';
1104 -- Set to ' ' for the default case (no queuing policy specified). Reset to
1105 -- first character (uppercase) of locking policy name if a valid
1106 -- Queuing_Policy pragma is encountered.
1108 Queuing_Policy_Sloc : Source_Ptr := No_Location;
1110 -- Remember location of previous Queuing_Policy pragma. This is used for
1111 -- inconsistency error messages. A value of System_Location is used if the
1112 -- policy is set in package System.
1114 Quiet_Output : Boolean := False;
1115 -- GNATMAKE, GNATCLEAN, GPRMAKE, GPRBUILD, GPRCLEAN
1116 -- Set to True if the tool should not have any output if there are no
1117 -- errors or warnings.
1119 Replace_In_Comments : Boolean := False;
1121 -- Set to True if -C switch used
1123 RTS_Lib_Path_Name : String_Ptr := null;
1124 RTS_Src_Path_Name : String_Ptr := null;
1126 -- Set to the "adalib" and "adainclude" directories of the run time
1127 -- specified by --RTS=.
1129 RTS_Switch : Boolean := False;
1130 -- GNAT, GNATMAKE, GNATBIND, GNATLS, GNATFIND, GNATXREF
1131 -- Set to True when the --RTS switch is set
1133 Run_Path_Option : Boolean := True;
1134 -- GNATMAKE, GNATLINK
1135 -- Set to False when no run_path_option should be issued to the linker
1137 Search_Directory_Present : Boolean := False;
1139 -- Set to True when argument is -I. Reset to False when next argument, a
1140 -- search directory path is taken into account. Note that this is quite
1141 -- different from other switches in this section in that it is only set in
1142 -- a transitory manner as a result of scanning a -I switch with no file
1143 -- name, and if set, is an indication that the next argument is to be
1144 -- treated as a file name.
1146 Sec_Stack_Used : Boolean := False;
1148 -- Set True if generated code uses the System.Secondary_Stack package. For
1149 -- the binder, set if any unit uses the secondary stack package.
1151 Setup_Projects : Boolean := False;
1153 -- Set to True for GNAT SETUP: the Project Manager creates non existing
1154 -- object, library and exec directories.
1156 Shared_Libgnat : Boolean;
1158 -- Set to True if a shared libgnat is requested by using the -shared option
1159 -- for GNATBIND and to False when using the -static option. The value of
1160 -- this flag is set by Gnatbind.Scan_Bind_Arg.
1162 Short_Circuit_And_Or : Boolean := False;
1164 -- Set True if a pragma Short_Circuit_And_Or applies to the current unit.
1166 Short_Descriptors : Boolean := False;
1168 -- Set True if a pragma Short_Descriptors applies to the current unit.
1170 Sprint_Line_Limit : Nat := 72;
1172 -- Limit values for chopping long lines in Sprint output, can be reset
1173 -- by use of NNN parameter with -gnatG or -gnatD switches.
1175 Stack_Checking_Enabled : Boolean;
1177 -- Set to indicate if -fstack-check switch is set for the compilation. True
1178 -- means that the switch is set, so that stack checking is enabled. False
1179 -- means that the switch is not set (no stack checking). This value is
1180 -- obtained from the external imported value flag_stack_check in the gcc
1181 -- backend (see Frontend) and may be referenced throughout the compilation
1184 Style_Check : Boolean := False;
1186 -- Set True to perform style checks. Activates checks carried out in
1187 -- package Style (see body of this package for details of checks) This
1188 -- flag is set True by either the -gnatg or -gnaty switches.
1190 Suppress_All_Inlining : Boolean := False;
1192 -- Set by -fno-inline. Suppresses all inlining, both front end and back end
1193 -- regardless of any other switches that are set.
1195 Suppress_Control_Flow_Optimizations : Boolean := False;
1197 -- Set by -fpreserve-control-flow. Suppresses control flow optimizations
1198 -- that interfere with coverage analysis based on the object code.
1200 System_Extend_Pragma_Arg : Node_Id := Empty;
1202 -- Set non-empty if and only if a correct Extend_System pragma was present
1203 -- in which case it points to the argument of the pragma, and the name can
1204 -- be located as Chars (Expression (System_Extend_Pragma_Arg)).
1206 System_Extend_Unit : Node_Id := Empty;
1208 -- This is set to Empty if GNAT_Mode is set, since pragma Extend_System
1209 -- is never appropriate in GNAT_Mode (and causes troubles, including
1210 -- bogus circularities, if we try to compile the run-time library with
1211 -- a System extension). If GNAT_Mode is not set, then System_Extend_Unit
1212 -- is a copy of the value set in System_Extend_Pragma_Arg.
1214 Subunits_Missing : Boolean := False;
1216 -- This flag is set true if missing subunits are detected with code
1217 -- generation active. This causes code generation to be skipped.
1219 Suppress_Checks : Boolean := False;
1221 -- Set to True if -gnatp (suppress all checks) switch present.
1223 Suppress_Options : Suppress_Array;
1225 -- Flags set True to suppress corresponding check, i.e. add an implicit
1226 -- pragma Suppress at the outer level of each unit compiled. Note that
1227 -- these suppress actions can be overridden by the use of the Unsuppress
1228 -- pragma. This variable is initialized by Osint.Initialize.
1230 Suppress_Back_Annotation : Boolean := False;
1232 -- This flag is set True if back annotation of representation information
1233 -- is to be suppressed. This is set if neither -gnatt or -gnatR0-3 is set.
1234 -- This avoids unnecessary time being spent on back annotation.
1236 Table_Factor : Int := 1;
1238 -- Factor by which all initial table sizes set in Alloc are multiplied.
1239 -- Used in Table to calculate initial table sizes (the initial table size
1240 -- is the value in Alloc, used as the Table_Initial parameter value,
1241 -- multiplied by the factor given here. The default value is used if no
1242 -- -gnatT switch appears.
1244 Tagged_Type_Expansion : Boolean := True;
1246 -- Set True if tagged types and interfaces should be expanded by the
1247 -- front-end. If False, the original tree is left unexpanded for tagged
1248 -- types and dispatching calls, assuming the underlying target supports
1249 -- it (e.g. in the JVM case).
1251 Task_Dispatching_Policy : Character := ' ';
1253 -- Set to ' ' for the default case (no task dispatching policy specified).
1254 -- Reset to first character (uppercase) of task dispatching policy name
1255 -- if a valid Task_Dispatching_Policy pragma is encountered.
1257 Task_Dispatching_Policy_Sloc : Source_Ptr := No_Location;
1259 -- Remember location of previous Task_Dispatching_Policy pragma. This is
1260 -- used for inconsistency error messages. A value of System_Location is
1261 -- used if the policy is set in package System.
1263 Tasking_Used : Boolean := False;
1264 -- Set True if any tasking construct is encountered. Used to activate the
1265 -- output of the Q, L and T lines in ALI files.
1267 Time_Slice_Set : Boolean := False;
1269 -- Set True if a pragma Time_Slice is processed in the main unit, or
1270 -- if the -gnatTnn switch is present to set a time slice value.
1272 Time_Slice_Value : Nat;
1274 -- Time slice value. Valid only if Time_Slice_Set is True, i.e. if
1275 -- Time_Slice pragma has been processed. Set to the time slice value in
1276 -- microseconds. Negative values are stored as zero, and the value is not
1277 -- larger than 1_000_000_000 (1000 seconds). Values larger than this are
1278 -- reset to this maximum. This can also be set with the -gnatTnn switch.
1280 Tolerate_Consistency_Errors : Boolean := False;
1282 -- Tolerate time stamp and other consistency errors. If this flag is set to
1283 -- True (-t), then inconsistencies result in warnings rather than errors.
1285 Treat_Categorization_Errors_As_Warnings : Boolean := False;
1286 -- Normally categorization errors are true illegalities. If this switch
1287 -- is set, then such errors result in warning messages rather than error
1288 -- messages. Set True by -gnateP (P for Pure/Preelaborate).
1290 Treat_Restrictions_As_Warnings : Boolean := False;
1292 -- Set True to treat pragma Restrictions as Restriction_Warnings. Set by
1295 Tree_Output : Boolean := False;
1297 -- Set to True (-gnatt) to generate output tree file
1299 True_VMS_Target : Boolean := False;
1300 -- Set True if we are on a VMS target. The setting of this flag reflects
1301 -- the true state of the compile, unlike Targparm.OpenVMS_On_Target which
1302 -- can also be true when debug flag m is set (-gnatdm). This is used in the
1303 -- few cases where we do NOT want -gnatdm to trigger the VMS behavior.
1305 Try_Semantics : Boolean := False;
1307 -- Flag set to force attempt at semantic analysis, even if parser errors
1308 -- occur. This will probably cause blowups at this stage in the game. On
1309 -- the other hand, most such blowups will be caught cleanly and simply
1310 -- say compilation abandoned. This flag is set to True by -gnatq or -gnatQ.
1312 Unchecked_Shared_Lib_Imports : Boolean := False;
1314 -- Set to True when shared library projects are allowed to import projects
1315 -- that are not shared library projects. Set by switch
1316 -- --unchecked-shared-lib-imports.
1318 Undefined_Symbols_Are_False : Boolean := False;
1320 -- Set to True by switch -u of gnatprep or -u in the preprocessing data
1321 -- file for the compiler. Indicates that while preprocessing sources,
1322 -- symbols that are not defined have the value FALSE.
1324 Unique_Error_Tag : Boolean := Tag_Errors;
1326 -- Indicates if error messages are to be prefixed by the string error:
1327 -- Initialized from Tag_Errors, can be forced on with the -gnatU switch.
1329 Universal_Addressing_On_AAMP : Boolean := False;
1331 -- Indicates if library-level objects should be accessed and updated using
1332 -- universal addressing instructions on the AAMP architecture. This flag is
1333 -- set to True when pragma Universal_Data is given as a configuration
1336 Unreserve_All_Interrupts : Boolean := False;
1338 -- Normally set False, set True if a valid Unreserve_All_Interrupts pragma
1339 -- appears anywhere in the main unit for GNAT, or if any ALI file has the
1340 -- corresponding attribute set in GNATBIND.
1342 Upper_Half_Encoding : Boolean := False;
1344 -- Normally set False, indicating that upper half ISO 8859-1 characters are
1345 -- used in the normal way to represent themselves. If the wide character
1346 -- encoding method uses the upper bit for this encoding, then this flag is
1347 -- set True, and upper half characters in the source indicate the start of
1348 -- a wide character sequence. Set by -gnatW or -W switches.
1350 Use_Include_Path_File : Boolean := False;
1351 -- GNATMAKE, GPRBUILD
1352 -- When True, create a source search path file, even when a mapping file
1355 Usage_Requested : Boolean := False;
1356 -- GNAT, GNATBIND, GNATMAKE
1357 -- Set to True if -h (-gnath for the compiler) switch encountered
1358 -- requesting usage information
1360 Use_Expression_With_Actions : Boolean;
1361 -- The N_Expression_With_Actions node has been introduced relatively
1362 -- recently, and not all back ends are prepared to handle it yet. So
1363 -- we use this flag to suppress its use during a transitional period.
1364 -- Currently the default is False for all cases (set in gnat1drv).
1365 -- The default can be modified using -gnatd.X/-gnatd.Y.
1367 Use_Pragma_Linker_Constructor : Boolean := False;
1369 -- True if pragma Linker_Constructor applies to adainit
1371 Use_VADS_Size : Boolean := False;
1373 -- Set to True if a valid pragma Use_VADS_Size is processed
1375 Validity_Checks_On : Boolean := True;
1377 -- This flag determines if validity checking is on or off. The initial
1378 -- state is on, and the required default validity checks are active. The
1379 -- actual set of checks that is performed if Validity_Checks_On is set is
1380 -- defined by the switches in package Validsw. The Validity_Checks_On flag
1381 -- is controlled by pragma Validity_Checks (On | Off), and also some
1382 -- generated compiler code (typically code that has to do with validity
1383 -- check generation) is compiled with this flag set to False. This flag is
1384 -- set to False by the -gnatp switch.
1386 Verbose_Mode : Boolean := False;
1387 -- GNAT, GNATBIND, GNATMAKE, GNATLINK, GNATLS, GNATNAME, GNATCLEAN,
1388 -- GPRMAKE, GPRBUILD, GPRCLEAN
1389 -- Set to True to get verbose mode (full error message text and location
1390 -- information sent to standard output, also header, copyright and summary)
1392 type Verbosity_Level_Type is (None, Low, Medium, High);
1393 pragma Ordered (Verbosity_Level_Type);
1394 Verbosity_Level : Verbosity_Level_Type := High;
1395 -- GNATMAKE, GPRMAKE
1396 -- Modified by gnatmake or gprmake switches -v, -vl, -vm, -vh. Indicates
1397 -- the level of verbosity of informational messages:
1399 -- In Low Verbosity, the reasons why a source is recompiled, the name
1400 -- of the executable and the reason it must be rebuilt is output.
1402 -- In Medium Verbosity, additional lines are output for each ALI file
1405 -- In High Verbosity, additional lines are output when the ALI file
1406 -- is part of an Ada library, is read-only or is part of the runtime.
1408 Warn_On_Ada_2005_Compatibility : Boolean := True;
1410 -- Set to True to generate all warnings on Ada 2005 compatibility issues,
1411 -- including warnings on Ada 2005 obsolescent features used in Ada 2005
1412 -- mode. Set False by -gnatwY.
1414 Warn_On_Ada_2012_Compatibility : Boolean := True;
1416 -- Set to True to generate all warnings on Ada 2012 compatibility issues,
1417 -- including warnings on Ada 2012 obsolescent features used in Ada 2012
1418 -- mode. Set False by -gnatwY.
1420 Warn_On_All_Unread_Out_Parameters : Boolean := False;
1422 -- Set to True to generate warnings in all cases where a variable is
1423 -- modified by being passed as to an OUT formal, but the resulting value is
1424 -- never read. The default is that this warning is suppressed, except in
1427 Warn_On_Assertion_Failure : Boolean := True;
1429 -- Set to True to activate warnings on assertions that can be determined
1430 -- at compile time will always fail. Set false by -gnatw.A.
1432 Warn_On_Assumed_Low_Bound : Boolean := True;
1434 -- Set to True to activate warnings for string parameters that are indexed
1435 -- with literals or S'Length, presumably assuming a lower bound of one. Set
1436 -- False by -gnatwW.
1438 Warn_On_Bad_Fixed_Value : Boolean := False;
1440 -- Set to True to generate warnings for static fixed-point expression
1441 -- values that are not an exact multiple of the small value of the type.
1443 Warn_On_Biased_Representation : Boolean := True;
1445 -- Set to True to generate warnings for size clauses, component clauses
1446 -- and component_size clauses that force biased representation. Set False
1449 Warn_On_Constant : Boolean := False;
1451 -- Set to True to generate warnings for variables that could be declared
1452 -- as constants. Modified by use of -gnatwk/K.
1454 Warn_On_Deleted_Code : Boolean := False;
1456 -- Set to True to generate warnings for code deleted by the front end
1457 -- for conditional statements whose outcome is known at compile time.
1458 -- Modified by use of -gnatwt/T.
1460 Warn_On_Dereference : Boolean := False;
1462 -- Set to True to generate warnings for implicit dereferences for array
1463 -- indexing and record component access. Modified by use of -gnatwd/D.
1465 Warn_On_Export_Import : Boolean := True;
1467 -- Set to True to generate warnings for suspicious use of export or
1468 -- import pragmas. Modified by use of -gnatwx/X.
1470 Warn_On_Hiding : Boolean := False;
1472 -- Set to True to generate warnings if a declared entity hides another
1473 -- entity. The default is that this warning is suppressed.
1475 Warn_On_Modified_Unread : Boolean := False;
1477 -- Set to True to generate warnings if a variable is assigned but is never
1478 -- read. Also controls warnings for similar cases involving out parameters,
1479 -- but only if there is only one out parameter for the procedure involved.
1480 -- The default is that this warning is suppressed.
1482 Warn_On_No_Value_Assigned : Boolean := True;
1484 -- Set to True to generate warnings if no value is ever assigned to a
1485 -- variable that is at least partially uninitialized. Set to false to
1486 -- suppress such warnings. The default is that such warnings are enabled.
1488 Warn_On_Non_Local_Exception : Boolean := False;
1490 -- Set to True to generate warnings for non-local exception raises and also
1491 -- handlers that can never handle a local raise. This warning is only ever
1492 -- generated if pragma Restrictions (No_Exception_Propagation) is set. The
1493 -- default is not to generate the warnings except that if the source has
1494 -- at least one exception handler, and this restriction is set, and the
1495 -- warning was not explicitly turned off, then it is turned on by default.
1497 No_Warn_On_Non_Local_Exception : Boolean := False;
1499 -- This is set to True if the above warning is explicitly suppressed. We
1500 -- use this to avoid turning it on by default when No_Exception_Propagation
1501 -- restriction is set and an exception handler is present.
1503 Warn_On_Object_Renames_Function : Boolean := False;
1505 -- Set to True to generate warnings when a function result is renamed as
1506 -- an object. The default is that this warning is disabled.
1508 Warn_On_Obsolescent_Feature : Boolean := False;
1510 -- Set to True to generate warnings on use of any feature in Annex or if a
1511 -- subprogram is called for which a pragma Obsolescent applies.
1513 Warn_On_Overlap : Boolean := False;
1515 -- Set to True to generate warnings when a writable actual which is not
1516 -- a by-copy type overlaps with another actual in a subprogram call.
1518 Warn_On_Questionable_Missing_Parens : Boolean := True;
1520 -- Set to True to generate warnings for cases where parentheses are missing
1521 -- and the usage is questionable, because the intent is unclear.
1523 Warn_On_Parameter_Order : Boolean := False;
1525 -- Set to True to generate warnings for cases where the argument list for
1526 -- a call is a sequence of identifiers that match the formal identifiers,
1527 -- but are in the wrong order.
1529 Warn_On_Redundant_Constructs : Boolean := False;
1531 -- Set to True to generate warnings for redundant constructs (e.g. useless
1532 -- assignments/conversions). The default is that this warning is disabled.
1534 Warn_On_Reverse_Bit_Order : Boolean := True;
1536 -- Set to True to generate warning (informational) messages for component
1537 -- clauses that are affected by non-standard bit-order. The default is
1538 -- that this warning is enabled.
1540 Warn_On_Suspicious_Modulus_Value : Boolean := True;
1542 -- Set to True to generate warnings for suspicious modulus values. The
1543 -- default is that this warning is enabled.
1545 Warn_On_Unchecked_Conversion : Boolean := True;
1547 -- Set to True to generate warnings for unchecked conversions that may have
1548 -- non-portable semantics (e.g. because sizes of types differ). The default
1549 -- is that this warning is enabled.
1551 Warn_On_Unordered_Enumeration_Type : Boolean := False;
1553 -- Set to True to generate warnings for inappropriate uses (comparisons
1554 -- and explicit ranges) on unordered enumeration types (which includes
1555 -- all enumeration types for which pragma Ordered is not given). The
1556 -- default is that this warning is disabled.
1558 Warn_On_Unrecognized_Pragma : Boolean := True;
1560 -- Set to True to generate warnings for unrecognized pragmas. The default
1561 -- is that this warning is enabled.
1563 Warn_On_Unrepped_Components : Boolean := False;
1565 -- Set to True to generate warnings for the case of components of record
1566 -- which have a record representation clause but this component does not
1567 -- have a component clause. The default is that this warning is disabled.
1569 Warn_On_Warnings_Off : Boolean := False;
1571 -- Set to True to generate warnings for use of Pragma Warnings (Off, ent),
1572 -- where either the pragma is never used, or it could be replaced by a
1573 -- pragma Unmodified or Unreferenced.
1575 type Warning_Mode_Type is (Suppress, Normal, Treat_As_Error);
1576 Warning_Mode : Warning_Mode_Type := Normal;
1578 -- Controls treatment of warning messages. If set to Suppress, warning
1579 -- messages are not generated at all. In Normal mode, they are generated
1580 -- but do not count as errors. In Treat_As_Error mode, warning messages
1581 -- are generated and are treated as errors.
1583 Wide_Character_Encoding_Method : WC_Encoding_Method := WCEM_Brackets;
1585 -- Method used for encoding wide characters in the source program. See
1586 -- description of type in unit System.WCh_Con for a list of the methods
1587 -- that are currently supported. Note that brackets notation is always
1588 -- recognized in source programs regardless of the setting of this
1589 -- variable. The default setting causes only the brackets notation to be
1590 -- recognized. If this is the main unit, this setting also controls the
1591 -- output of the W=? parameter in the ALI file, which is used to provide
1592 -- the default for encoding [Wide_[Wide_]]Text_IO files. For the binder,
1593 -- the value set here overrides this main unit default.
1595 Wide_Character_Encoding_Method_Specified : Boolean := False;
1597 -- Set True if the value in Wide_Character_Encoding_Method was set as
1598 -- a result of an explicit -gnatW? or -W? switch. False otherwise.
1600 Xref_Active : Boolean := True;
1602 -- Set if cross-referencing is enabled (i.e. xref info in ALI files)
1604 Zero_Formatting : Boolean := False;
1606 -- Do no formatting (no title, no leading spaces, no empty lines) in
1607 -- auxiliary outputs (-e, -K, -l, -R).
1609 ----------------------------
1610 -- Configuration Settings --
1611 ----------------------------
1613 -- These are settings that are used to establish the mode at the start of
1614 -- each unit. The values defined below can be affected either by command
1615 -- line switches, or by the use of appropriate configuration pragmas in a
1616 -- configuration pragma file.
1618 Ada_Version_Config : Ada_Version_Type;
1620 -- This is the value of the configuration switch for the Ada 83 mode, as
1621 -- set by the command line switches -gnat83/95/05, and possibly modified by
1622 -- the use of configuration pragmas Ada_83/Ada95/Ada05. This switch is used
1623 -- to set the initial value for Ada_Version mode at the start of analysis
1624 -- of a unit. Note however, that the setting of this flag is ignored for
1625 -- internal and predefined units (which are always compiled in the most up
1626 -- to date version of Ada).
1628 Ada_Version_Explicit_Config : Ada_Version_Type;
1630 -- This is set in the same manner as Ada_Version_Config. The difference is
1631 -- that the setting of this flag is not ignored for internal and predefined
1632 -- units, which for some purposes do indeed access this value, regardless
1633 -- of the fact that they are compiled the most up to date ada version).
1635 Assertions_Enabled_Config : Boolean;
1637 -- This is the value of the configuration switch for assertions enabled
1638 -- mode, as possibly set by the command line switch -gnata, and possibly
1639 -- modified by the use of the configuration pragma Assertion_Policy.
1641 Assume_No_Invalid_Values_Config : Boolean;
1643 -- This is the value of the configuration switch for assuming "no invalid
1644 -- values enabled" mode, as possibly set by the command line switch
1645 -- -gnatB, and possibly modified by the use of the configuration pragma
1646 -- Assume_No_Invalid_Values.
1648 Check_Policy_List_Config : Node_Id;
1650 -- This points to the list of N_Pragma nodes for Check_Policy pragmas
1651 -- that are linked through the Next_Pragma fields, with the list being
1652 -- terminated by Empty. The order is most recently processed first. This
1653 -- list includes only those pragmas in configuration pragma files.
1655 Debug_Pragmas_Enabled_Config : Boolean;
1657 -- This is the value of the configuration switch for debug pragmas enabled
1658 -- mode, as possibly set by the command line switch -gnata and possibly
1659 -- modified by the use of the configuration pragma Debug_Policy.
1661 Default_Pool_Config : Node_Id := Empty;
1663 -- Same as Default_Pool above, except this is only for Default_Storage_Pool
1664 -- pragmas that are configuration pragmas.
1666 Dynamic_Elaboration_Checks_Config : Boolean := False;
1668 -- Set True for dynamic elaboration checking mode, as set by the -gnatE
1669 -- switch or by the use of pragma Elaboration_Checking (Dynamic).
1671 Exception_Locations_Suppressed_Config : Boolean := False;
1673 -- Set True by use of the configuration pragma Suppress_Exception_Messages
1675 Extensions_Allowed_Config : Boolean;
1677 -- This is the flag that indicates whether extensions are allowed. It can
1678 -- be set True either by use of the -gnatX switch, or by use of the
1679 -- configuration pragma Extensions_Allowed (On). It is always set to True
1680 -- for internal GNAT units, since extensions are always permitted in such
1683 External_Name_Exp_Casing_Config : External_Casing_Type;
1685 -- This is the value of the configuration switch that controls casing of
1686 -- external symbols for which an explicit external name is given. It can be
1687 -- set to Uppercase by the command line switch -gnatF, and further modified
1688 -- by the use of the configuration pragma External_Name_Casing in the
1689 -- gnat.adc file. This flag is used to set the initial value for
1690 -- External_Name_Exp_Casing at the start of analyzing each unit. Note
1691 -- however that the setting of this flag is ignored for internal and
1692 -- predefined units (which are always compiled with As_Is mode).
1694 External_Name_Imp_Casing_Config : External_Casing_Type;
1696 -- This is the value of the configuration switch that controls casing of
1697 -- external symbols where the external name is implicitly given. It can be
1698 -- set to Uppercase by the command line switch -gnatF, and further modified
1699 -- by the use of the configuration pragma External_Name_Casing in the
1700 -- gnat.adc file. This flag is used to set the initial value for
1701 -- External_Name_Imp_Casing at the start of analyzing each unit. Note
1702 -- however that the setting of this flag is ignored for internal and
1703 -- predefined units (which are always compiled with Lowercase mode).
1705 Fast_Math_Config : Boolean;
1707 -- This is the value of the configuration switch that controls Fast_Math
1708 -- mode, as set by a Fast_Math pragma in configuration pragmas. It is
1709 -- used to set the initial value of Fast_Math at the start of each new
1710 -- compilation unit.
1712 Init_Or_Norm_Scalars_Config : Boolean;
1714 -- This is the value of the configuration switch that is set by one
1715 -- of the pragmas Initialize_Scalars or Normalize_Scalars.
1717 Initialize_Scalars_Config : Boolean;
1719 -- This is the value of the configuration switch that is set by the
1720 -- pragma Initialize_Scalars when it appears in the gnat.adc file.
1721 -- This switch is not set when the pragma appears ahead of a given
1722 -- unit, so it does not affect the compilation of other units.
1724 Optimize_Alignment_Config : Character;
1726 -- This is the value of the configuration switch that controls the
1727 -- alignment optimization mode, as set by an Optimize_Alignment pragma.
1728 -- It is used to set the initial value of Optimize_Alignment at the start
1729 -- of each new compilation unit, except that it is always set to 'O' (off)
1730 -- for internal units.
1732 Persistent_BSS_Mode_Config : Boolean;
1734 -- This is the value of the configuration switch that controls whether
1735 -- potentially persistent data is to be placed in the persistent_bss
1736 -- section. It can be set True by use of the pragma Persistent_BSS.
1737 -- This flag is used to set the initial value of Persistent_BSS_Mode
1738 -- at the start of each compilation unit, except that it is always
1739 -- set False for predefined units.
1741 Polling_Required_Config : Boolean;
1743 -- This is the value of the configuration switch that controls polling
1744 -- mode. It can be set True by the command line switch -gnatP, and then
1745 -- further modified by the use of pragma Polling in the gnat.adc file. This
1746 -- flag is used to set the initial value for Polling_Required at the start
1747 -- of analyzing each unit.
1749 Short_Descriptors_Config : Boolean;
1751 -- This is the value of the configuration switch that controls the use of
1752 -- Short_Descriptors for setting descriptor default sizes. It can be set
1753 -- True by the use of the pragma Short_Descriptors in the gnat.adc file.
1754 -- This flag is used to set the initial value for Short_Descriptors at the
1755 -- start of analyzing each unit.
1757 Use_VADS_Size_Config : Boolean;
1759 -- This is the value of the configuration switch that controls the use of
1760 -- VADS_Size instead of Size wherever the attribute Size is used. It can
1761 -- be set True by the use of the pragma Use_VADS_Size in the gnat.adc file.
1762 -- This flag is used to set the initial value for Use_VADS_Size at the
1763 -- start of analyzing each unit. Note however that the setting of this flag
1764 -- is ignored for internal and predefined units (which are always compiled
1765 -- with the standard Size semantics).
1767 type Config_Switches_Type is private;
1768 -- Type used to save values of the switches set from Config values
1770 procedure Save_Opt_Config_Switches (Save : out Config_Switches_Type);
1771 -- This procedure saves the current values of the switches which are
1772 -- initialized from the above Config values, and then resets these switches
1773 -- according to the Config value settings.
1775 procedure Set_Opt_Config_Switches
1776 (Internal_Unit : Boolean;
1777 Main_Unit : Boolean);
1778 -- This procedure sets the switches to the appropriate initial values. The
1779 -- parameter Internal_Unit is True for an internal or predefined unit, and
1780 -- affects the way the switches are set (see above). Main_Unit is true if
1781 -- switches are being set for the main unit (this affects setting of the
1782 -- assert/debug pragma switches, which are normally set false by default
1783 -- for an internal unit, except when the internal unit is the main unit,
1784 -- in which case we use the command line settings).
1786 procedure Restore_Opt_Config_Switches (Save : Config_Switches_Type);
1787 -- This procedure restores a set of switch values previously saved by a
1788 -- call to Save_Opt_Switches.
1790 procedure Register_Opt_Config_Switches;
1791 -- This procedure is called after processing the gnat.adc file and other
1792 -- configuration pragma files to record the values of the Config switches,
1793 -- as possibly modified by the use of command line switches and pragmas
1794 -- appearing in these files.
1796 ------------------------
1797 -- Other Global Flags --
1798 ------------------------
1800 Expander_Active : Boolean := False;
1801 -- A flag that indicates if expansion is active (True) or deactivated
1802 -- (False). When expansion is deactivated all calls to expander routines
1803 -- have no effect. Note that the initial setting of False is merely to
1804 -- prevent saving of an undefined value for an initial call to the
1805 -- Expander_Mode_Save_And_Set procedure. For more information on the use of
1806 -- this flag, see package Expander. Indeed this flag might more logically
1807 -- be in the spec of Expander, but it is referenced by Errout, and it
1808 -- really seems wrong for Errout to depend on Expander.
1810 Static_Dispatch_Tables : Boolean := True;
1811 -- This flag indicates if the backend supports generation of statically
1812 -- allocated dispatch tables. If it is True, then the front end will
1813 -- generate static aggregates for dispatch tables that contain forward
1814 -- references to addresses of subprograms not seen yet, and the back end
1815 -- must be prepared to handle this case. If it is False, then the front
1816 -- end generates assignments to initialize the dispatch table, and there
1817 -- are no such forward references. By default we build statically allocated
1818 -- dispatch tables for all library level tagged types in all platforms.This
1819 -- behavior can be disabled using switch -gnatd.t which will set this flag
1820 -- to False and revert to the previous dynamic behavior.
1822 -----------------------
1823 -- Tree I/O Routines --
1824 -----------------------
1826 procedure Tree_Read;
1827 -- Reads switch settings from current tree file using Tree_Read
1829 procedure Tree_Write;
1830 -- Writes out switch settings to current tree file using Tree_Write
1832 --------------------------
1833 -- ASIS Version Control --
1834 --------------------------
1836 -- These two variables (Tree_Version_String and Tree_ASIS_Version_Number)
1837 -- are supposed to be used in the GNAT/ASIS version check performed in
1838 -- the ASIS code (this package is also a part of the ASIS implementation).
1839 -- They are set by Tree_Read procedure, so they represent the version
1840 -- number (and the version string) of the compiler which has created the
1841 -- tree, and they are supposed to be compared with the corresponding values
1842 -- from the Tree_IO and Gnatvsn packages which also are a part of ASIS
1845 Tree_Version_String : String_Access;
1846 -- Used to store the compiler version string read from a tree file to check
1847 -- if it is from the same date as stored in the version string in Gnatvsn.
1848 -- We require that ASIS Pro can be used only with GNAT Pro, but we allow
1849 -- non-Pro ASIS and ASIS-based tools to be used with any version of the
1850 -- GNAT compiler. Therefore, we need the possibility to compare the dates
1851 -- of the corresponding source sets, using version strings that may be
1852 -- of different lengths.
1854 Tree_ASIS_Version_Number : Int;
1855 -- Used to store the ASIS version number read from a tree file to check if
1856 -- it is the same as stored in the ASIS version number in Tree_IO.
1860 -- The following type is used to save and restore settings of switches in
1861 -- Opt that represent the configuration (i.e. result of config pragmas).
1863 -- Note that Ada_Version_Explicit is not included, since this is a sticky
1864 -- flag that once set does not get reset, since the whole idea of this flag
1865 -- is to record the setting for the main unit.
1867 type Config_Switches_Type is record
1868 Ada_Version : Ada_Version_Type;
1869 Ada_Version_Explicit : Ada_Version_Type;
1870 Assertions_Enabled : Boolean;
1871 Assume_No_Invalid_Values : Boolean;
1872 Check_Policy_List : Node_Id;
1873 Debug_Pragmas_Enabled : Boolean;
1874 Default_Pool : Node_Id;
1875 Dynamic_Elaboration_Checks : Boolean;
1876 Exception_Locations_Suppressed : Boolean;
1877 Extensions_Allowed : Boolean;
1878 External_Name_Exp_Casing : External_Casing_Type;
1879 External_Name_Imp_Casing : External_Casing_Type;
1880 Fast_Math : Boolean;
1881 Init_Or_Norm_Scalars : Boolean;
1882 Initialize_Scalars : Boolean;
1883 Optimize_Alignment : Character;
1884 Optimize_Alignment_Local : Boolean;
1885 Persistent_BSS_Mode : Boolean;
1886 Polling_Required : Boolean;
1887 Short_Descriptors : Boolean;
1888 Use_VADS_Size : Boolean;
1891 -- The following declarations are for GCC version dependent flags. We do
1892 -- not let client code in the compiler test GCC_Version directly, but
1893 -- instead use deferred constants for relevant feature tags.
1895 -- Note: there currently are no such constants defined in this section,
1896 -- since the compiler front end is currently entirely independent of the
1897 -- GCC version, which is a desirable state of affairs.
1899 function get_gcc_version return Int;
1900 pragma Import (C, get_gcc_version, "get_gcc_version");
1902 GCC_Version : constant Nat := get_gcc_version;
1904 -- Indicates which version of gcc is in use (3 = 3.x, 4 = 4.x). Note that
1905 -- gcc 2.8.1 (which used to be a value of 2) is no longer supported.
OSDN Git Service
