[pf3gnuchains/gcc-fork.git] / gcc / ChangeLog

2009-01-13  Vladimir Makarov  <vmakarov@redhat.com>

        PR target/38811
        * Makefile.in (ira-lives.o): Add except.h.

        * ira-lives.c: Include except.h.
        (process_bb_node_lives): Process can_throw_internal.

2009-01-13  Jakub Jelinek  <jakub@redhat.com>

        PR rtl-optimization/38774
        * combine.c (simplify_set): When undoing cc_use change, don't do
        PUT_CODE on the newly created comparison, but instead put back the
        old comparison.

2009-01-13  Joseph Myers  <joseph@codesourcery.com>

        * doc/invoke.texi (ARM Options): Update lists of -mcpu and -march
        values.  Remove duplicate arm8 entry.

2009-01-13  Sebastian Pop  <sebastian.pop@amd.com>

        PR tree-optimization/38786
        * graphite.c (expand_scalar_variables_ssa_name): New, outlined from
        the SSA_NAME case of expand_scalar_variables_expr.
        Set the type of an expression to the type of its assign statement.
        (expand_scalar_variables_expr): Also gather the scalar computation
        used to index the memory access.  Do not pass loop_p.
        Fix comment.  Stop recursion on tcc_constant or tcc_declaration.
        (expand_scalar_variables_stmt): Pass to expand_scalar_variables_expr
        the gimple_stmt_iterator where it inserts new code.  Do not pass loop_p.
        (copy_bb_and_scalar_dependences): Do not pass loop_p.
        (translate_clast): Update call to copy_bb_and_scalar_dependences.

2009-01-13  Sebastian Pop  <sebastian.pop@amd.com>

        * graphite.h (debug_value): Removed.
        * graphite.c (debug_value): Removed.

2009-01-13  Richard Earnshaw  <rearnsha@arm.com>

        * arm.c (output_move_double): Don't synthesize thumb-2 ldrd/strd with
        two 32-bit instructions.

2009-01-13  Richard Earnshaw  <rearnsha@arm.com>

        * arm.c (struct processors): Pass for speed down into cost helper
        functions.
        (const_ok_for_op): Handle COMPARE and inequality nodes.
        (arm_rtx_costs_1): Rewrite.
        (arm_size_rtx_costs): Update prototype.
        (arm_rtx_costs): Pass speed down to helper functions.
        (arm_slowmul_rtx_costs): Rework cost calculations.
        (arm_fastmul_rtx_costs, arm_xscale_rtx_costs): Likewise.
        (arm_9e_rtx_costs): Likewise.

2009-01-13  Uros Bizjak  <ubizjak@gmail.com>

        * config/alpha/alpha.c (alpha_legitimate_address_p): Explicit
        relocations of local symbols  wider than UNITS_PER_WORD are not valid.
        (alpha_legitimize_address): Do not split local symbols wider than
        UNITS_PER_WORD into HIGH/LO_SUM parts.

2009-01-13  Danny Smith  <dannysmith@users.sourceforge.net>

        PR bootstrap/38580
        * gcc.c (process_command): Replace call to execvp with calls
        to pex_one and exit.

2009-01-03  Anatoly Sokolov  <aesok@post.ru>

        PR target/29141
        * config/avr/t-avr (LIB1ASMFUNCS): Add _tablejump_elpm.
        * config/avr/libgcc.S (__do_global_ctors, __do_global_dtors): Add
        variant for devices with 3-byte PC.
        (__tablejump_elpm__) : New.

2009-01-12  Jakub Jelinek  <jakub@redhat.com>

        PR c/32041
        * c-parser.c (c_parser_postfix_expression): Allow `->' in
        offsetof member-designator, handle it as `[0].'.

2009-01-12  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

        * pa.c (pa_asm_output_mi_thunk): Use pc-relative branch to thunk
        function when not using named sections on targets with named sections
        if branch distance is less than 262132.

2009-01-12  Richard Earnshaw  <rearnsha@arm.com>

        * combine.c (combine_instructions):  Recompute
        optimize_this_for_speed_p  for each BB in the main combine loop.

2009-01-12  Tomas Bily  <tbily@suse.cz>

        PR middlend/38385
        * tree-loop-distribution.c (prop_phis): New function.
        (generate_builtin): Call prop_phis.
        * testsuite/gcc.dg/tree-ssa/pr38385.c: New file.

2009-01-12  Jakub Jelinek  <jakub@redhat.com>

        PR tree-optimization/38807
        * tree-ssa-reassoc.c (remove_visited_stmt_chain): Don't look at
        gimple_visited_p unless stmt is GIMPLE_ASSIGN.

2009-01-11  Adam Nemet  <anemet@caviumnetworks.com>

        * expmed.c (store_bit_field_1): Properly truncate the paradoxical
        subreg of op0 to the original op0.

2009-01-11  Laurent GUERBY <laurent@guerby.net>

        * doc/sourcebuild.texi (Source Tree): Move up intl and fixinc.
        
2009-01-11  Markus Schoepflin  <markus.schoepflin@comsoft.de>

        PR debug/7055
        * gcc/mips-tfile.c (parse_def): Fix parsing of def strings
        starting with digits.

2009-01-10  Jakub Jelinek  <jakub@redhat.com>

        PR target/38695
        * config/arm/arm.c (arm_is_long_call_p): Don't call
        arm_function_in_section_p if decl isn't a FUNCTION_DECL.

2009-01-09  Steven Bosscher  <steven@gcc.gnu.org>

        * regrename.c (regrename_optimize): Fix dumping.
        (find_oldest_value_reg): Preserve REG_POINTER.
        (copy_hardreg_forward_1): Likewise.

2009-01-09  Diego Novillo  <dnovillo@google.com>

        * gimple.h (struct gimple_statement_base)<uid>: Document
        the restrictions on its use.
        (gimple_uid): Tidy.
        (gimple_set_uid): Tidy.

2009-01-09  Jakub Jelinek  <jakub@redhat.com>

        * config/i386/i386.c (ix86_expand_movmem, ix86_expand_setmem): Add
        zero guard even if align_bytes != 0 and count is smaller than
        size_needed.

2008-01-09  Vladimir Makarov  <vmakarov@redhat.com>

        PR rtl-optimization/38495
        * ira-emit.c (print_move_list, ira_debug_move_list): New functions.
        (add_range_and_copies_from_move_list): Print all added ranges.
        Add ranges to memory optimized destination.

2009-01-09  Jakub Jelinek  <jakub@redhat.com>

        PR target/38686
        PR target/38708
        * config/i386/i386.c (override_options): Reject
        -mstringop-strategy=rep_8byte with -m32.
        (ix86_expand_movmem): For size_needed == 1 set epilogue_size_needed
        to 1.  Do count comparison against epilogue_size_needed at compile
        time even when count_exp was constant forced into register.  For
        size_needed don't jump to epilogue, instead just avoid aligning
        and invoke the body algorithm.  If need_zero_guard, add zero guard
        even if count is non-zero, but smaller than size_needed + number of
        bytes that could be stored for alignment.
        (ix86_expand_setmem): For size_needed == 1 set epilogue_size_needed
        to 1.  If need_zero_guard, add zero guard even if count is non-zero,
        but smaller than size_needed + number of bytes that could be stored
        for alignment.  Compare size_needed with epilogue_size_needed instead
        of desired_align - align, don't adjust size_needed, pass
        epilogue_size_needed to the epilogue expanders.

        PR c/35742
        * c-pretty-print.c (pp_c_expression): Handle GOTO_EXPR like BIND_EXPR.

2009-01-09  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

        * pa.c (last_address): Change to unsigned.
        (update_total_code_bytes): Change argument to unsigned.  Don't
        check if insn addresses are set.
        (pa_output_function_epilogue): Set last_address to UINT_MAX if insn
        addresses are not set.
        (pa_asm_output_mi_thunk): Handle wrap when updating last_address.

2009-01-09  Nick Clifton  <nickc@redhat.com>

        * config/sh/symbian.c: Replace uses of DECL_INLINE with
        DECL_DECLARED_INLINE_P.

2009-01-09  Jakub Jelinek  <jakub@redhat.com>

        PR middle-end/38347
        * dojump.c (do_jump_by_parts_zero_rtx): Use mode instead of
        GET_MODE (op0) in operand_subword_force calls.

        PR middle-end/38771
        * fold-const.c (fold_unary): For COMPOUND_EXPR and COND_EXPR,
        fold_convert arg0 operands to TREE_TYPE (op0) first.

2009-01-08  Vladimir Makarov  <vmakarov@redhat.com>

        * params.def (ira-max-conflict-table-size): Decrease default value
        to 1000.

2009-01-08  Jakub Jelinek  <jakub@redhat.com>

        PR tree-optimization/37031
        * lambda-code.c (lambda_collect_parameters): Call pointer_set_destroy
        on parameter_set.
        (build_access_matrix): Reserve correct size for AM_MATRIX vector,
        allocate it using gc instead of heap, use VEC_quick_push instead of
        VEC_safe_push.
        * graphite.c (build_access_matrix): Allocate AM_MATRIX vector using gc
        instead of heap, use VEC_quick_push instead of VEC_safe_push.
        * tree-data-ref.h (struct access_matrix): Change matrix to gc
        allocated vector from heap allocated.
        * lambda.h: Add DEF_VEC_ALLOC_P for gc allocated lambda_vector.
        * tree-loop-linear.c (linear_transform_loops): Allocate nest
        vector only after perfect_loop_nest_depth call.

2009-01-08  Sebastian Pop  <sebastian.pop@amd.com>
            Jan Sjodin  <jan.sjodin@amd.com>

        PR tree-optimization/38559
        * graphite.c (debug_value, copy_constraint,
        swap_constraint_variables, scale_constraint_variable, ): New.
        (get_lower_bound, get_upper_bound): Removed.
        (graphite_trans_bb_strip_mine): Clean up this code that works
        only for constant number of iterations.  Fully copy upper and
        lower bound constraints, not only the constant part of them.
        * graphite.h (debug_value): Declared.

2009-01-08  Ira Rosen  <irar@il.ibm.com>

        PR tree-optimization/37194
        * tree-vect-transform.c (vect_estimate_min_profitable_iters):
        Don't add the cost of cost model guard in prologue to scalar 
        outside cost in case of known number of iterations.

2009-01-07  Nathan Froyd  <froydnj@codesourcery.com>
            Alan Modra  <amodra@bigpond.net.au>

        * config/rs6000/rs6000.c (rs6000_legitimize_address): Check for
        non-word-aligned REG+CONST addressing.

2009-01-07  Uros Bizjak  <ubizjak@gmail.com>

        PR target/38706
        * config/alpha/alpha.c (alpha_end_function): For TARGET_ABI_OSF, call
        free_after_compilation when outputting a thunk.
        (alpha_output_mi_thunk_osf): Assert that we are processing a thunk.
        Do not call free_after_compilation here.

2009-01-07  Uros Bizjak  <ubizjak@gmail.com>

        * config/i386/i386.c (ix86_target_string): Use ARRAY_SIZE.
        (ix86_valid_target_attribute_inner_p): Ditto.

2009-01-07  Jan Sjodin  <jan.sjodin@amd.com>

        PR tree-optimization/38492
        PR tree-optimization/38498
        * tree-check.c (operator_is_linear, scev_is_linear_expression): New.
        * tree-chrec.h (scev_is_linear_expression): Declared.
        * graphite.c (graphite_cannot_represent_loop_niter): New.
        (scopdet_basic_block_info): Call graphite_cannot_represent_loop_niter.
        (graphite_loop_normal_form): Use gcc_assert.
        (scan_tree_for_params): Use CASE_CONVERT.
        (phi_node_is_iv, bb_contains_non_iv_scalar_phi_nodes): New.
        (build_scop_conditions_1): Call bb_contains_non_iv_scalar_phi_nodes.
        Use gcc_assert.  Discard scops that contain unhandled cases.
        (build_scop_conditions): Return a boolean status for unhandled cases.
        (strip_mine_profitable_p): Print the loop number, not its depth.
        (is_interchange_valid): Pass the depth of the loop nest, don't
        recompute it wrongly.
        (graphite_trans_bb_block): Same.
        (graphite_trans_bb_block): Print tentative of loop blocking.
        (graphite_trans_scop_block): Do not print that the loop has been
        blocked.
        (graphite_transform_loops): Do not handle scops that contain condition
        scalar phi nodes.

2009-01-07  H.J. Lu  <hongjiu.lu@intel.com>

        AVX Programming Reference (December, 2008)
        * config/i386/avxintrin.h (_mm256_stream_si256): New.
        (_mm256_stream_pd): Likewise.
        (_mm256_stream_ps): Likewise.

        * config/i386/i386.c (ix86_builtins): Add IX86_BUILTIN_MOVNTDQ256,
        IX86_BUILTIN_MOVNTPD256 and IX86_BUILTIN_MOVNTPS256.
        (ix86_special_builtin_type): Add VOID_FTYPE_PV4DI_V4DI.
        (bdesc_special_args): Add __builtin_ia32_movntdq256,
        __builtin_ia32_movntpd256 and __builtin_ia32_movntps256.
        (ix86_init_mmx_sse_builtins): Handle VOID_FTYPE_PV4DI_V4DI.
        (ix86_expand_special_args_builtin): Likewise.

        * config/i386/sse.md (AVXMODEDI): New.
        (avx_movnt<mode>): Likewise.
        (avx_movnt<mode>): Likewise.
        (<sse>_movnt<mode>): Remove AVX support.
        (sse2_movntv2di): Likewise.

2009-01-07  Richard Guenther  <rguenther@suse.de>

        PR middle-end/38751
        * fold-const.c (extract_muldiv): Remove obsolete comment.
        (fold_plusminus_mult_expr): Undo MINUS_EXPR
        to PLUS_EXPR canonicalization for the canonicalization.

2009-01-07  Gerald Pfeifer  <gerald@pfeifer.com>

        * doc/install.texi (alpha*-dec-osf*): Remove note on 32-bit
        hosted cross-compilers generating less efficient code.

2009-01-06  Richard Sandiford  <rdsandiford@googlemail.com>

        * function.h (rtl_data): Add a dbr_scheduled_p field.
        * reorg.c (dbr_schedule): Set it.
        (gate_handle_delay_slots): Check it.
        * config/mips/mips.c (mips_base_delayed_branch): Delete.
        (mips_reorg): Check flag_delayed_branch instead of
        mips_base_delayed_branch.
        (mips_override_options): Don't set mips_base_delayed_branch
        or flag_delayed_branch.

2009-01-06  Richard Sandiford  <rdsandiford@googlemail.com>

        PR rtl-optimization/38426.
        * ira.c (ira): Set current_function_is_leaf earlier.

2009-01-06  Jakub Jelinek  <jakub@redhat.com>

        PR rtl-optimization/38722
        * combine.c (try_combine): Don't modify PATTERN (i3) and notes
        too early, only set a flag and modify after last possible
        undo_all point.

2009-01-06  Janis Johnson  <janis187@us.ibm.com>

        PR c/34252
        * ginclude/float.h: Rename DECnn_DEN to DECnn_SUBNORMAL_MIN.
        * real.c (decimal_single_format): Correct values of emin and emax.
        (decimal_double_format): Ditto.
        (decimal_quad_format): Ditto.
        * c-cppbuiltin.c (builtin_define_decimal_float_constants): Adjust
        computation of DECnn_MIN and DECnn_MAX for corrected values of
        emin and emax.  Define __DECnn_SUBNORMAL_MIN__ instead of
        __DECnn_MIN__, and adjust its computation for the corrected value
        of emin.

2009-01-06  Jan Hubicka  <jh@suse.cz>

        PR target/38744
        * i386.c (ix86_expand_call): Use ARRAY_SIZE.

2009-01-06  Gerald Pfeifer  <gerald@pfeifer.com>

        * doc/contrib.texi (Contributors): Slightly adjust the end note.
        Add Robert Clark to the list of testers.

2009-01-06  Jan Hubicka  <jh@suse.cz>
            Kai Tietz <kai.tietz@onevision.com>

        * i386.md (*msabi_syvabi): Add SSE regs clobbers.
        * i386.c (ix86_expand_call): Add clobbers.

2009-01-06  Jan Hubicka  <jh@suse.cz>
            Kai Tietz <kai.tietz@onevision.com>

        * i386.h (CONDITIONAL_CALL_USAGE): SSE regs are not used for w64 ABI.
        * i386.c (struct ix86_frame): Add padding0 and nsseregs.
        (ix86_nsaved_regs): Count only general purpose regs.
        (ix86_nsaved_sseregs): New.
        (ix86_compute_frame_layout): Update nsseregs; set preferred alignment
        to 16 for w64; compute padding and size of sse reg save area.
        (ix86_emit_save_regs, ix86_emit_save_regs_using_mov): Save only
        general purpose regs.
        (ix86_emit_save_sse_regs_using_mov): New.
        (ix86_expand_prologue): Save SSE regs if needed.
        (ix86_emit_restore_regs_using_mov): Use only general purpose regs.
        (ix86_emit_restore_sse_regs_using_mov): New.
        (ix86_expand_epilogue): Save SSE regs if needed.

2009-01-06  Jan Hubicka  <jh@suse.cz>
            Kai Tietz <kai.tietz@onevision.com>

        * i386.h (ACCUMULATE_OUTGOING_ARGS): Enable for MSABI
        * i386.c (init_cumulative_args): Disallow calls of MSABI functions
        when accumulate outgoing args is off.

2009-01-06  H.J. Lu  <hongjiu.lu@intel.com>

        PR bootstrap/38742
        * ira-color.c (ira_reuse_stack_slot): Check ENABLE_IRA_CHECKING
        before using pseudos_have_intersected_live_ranges_p.

        * ira-int.h (ira_assert): Always define.

2009-01-06  H.J. Lu  <hongjiu.lu@intel.com>

        AVX Programming Reference (December, 2008)
        * config/i386/avxintrin.h (_mm_permute2_pd): Removed.
        (_mm256_permute2_pd): Likewise.
        (_mm_permute2_ps): Likewise.
        (_mm256_permute2_ps): Likewise.
        * config/i386/i386.md (UNSPEC_VPERMIL2): Likewise.
        * config/i386/sse.md (avx_vpermil2<mode>3): Likewise.

        * config/i386/i386.c (ix86_builtins): Remove
        IX86_BUILTIN_VPERMIL2PD, IX86_BUILTIN_VPERMIL2PS,
        IX86_BUILTIN_VPERMIL2PD256 and IX86_BUILTIN_VPERMIL2PS256.
        (ix86_builtin_type): Remove V8SF_FTYPE_V8SF_V8SF_V8SI_INT,
        V4DF_FTYPE_V4DF_V4DF_V4DI_INT, V4SF_FTYPE_V4SF_V4SF_V4SI_INT
        and V2DF_FTYPE_V2DF_V2DF_V2DI_INT.
        (bdesc_args): Remove __builtin_ia32_vpermil2pd,
        __builtin_ia32_vpermil2ps, __builtin_ia32_vpermil2pd256 and
        __builtin_ia32_vpermil2ps256.
        (ix86_init_mmx_sse_builtins): Updated.
        (ix86_expand_args_builtin): Likewise.

2009-01-05  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>

        * pa.c (output_call): Relocate non-jump insns in the delay slot of
        long absolute calls when generating PA 2.0 code.

2009-01-05  Vladimir Makarov  <vmakarov@redhat.com>

        PR rtl-optimization/38583
        * params.h (IRA_MAX_CONFLICT_TABLE_SIZE): New macro.

        * params.def (ira-max-conflict-table-size): New.

        * doc/invoke.texi (ira-max-conflict-table-size): Decribe.
        
        * ira.h (ira_conflicts_p): New external definition.
        
        * ira-conflicts.c (build_conflict_bit_table): Do not build too big
        table.  Report this.  Return result of building.
        (ira_build_conflicts): Use ira_conflicts_p.  Check result of
        building conflict table.

        * ira-color.c (fast_allocation): Use num instead of ira_allocnos_num.
        (ira_color): Use ira_conflicts_p.
        
        * global.c: Include ira.h.
        (pseudo_for_reload_consideration_p, build_insn_chain): Use
        ira_conflicts_p.

        * Makefile.in (global.o): Add ira.h.
        
        * ira-build.c (mark_all_loops_for_removal,
        propagate_some_info_from_allocno): New.
        (remove_unnecessary_allocnos): Call
        propagate_some_info_from_allocno.
        (remove_low_level_allocnos): New.
        (remove_unnecessary_regions): Add parameter.  Call
        mark_all_loops_for_removal and remove_low_level_allocnos.  Pass
        parameter to remove_unnecessary_regions.
        (ira_build): Remove all regions but root if the conflict table was
        not built.  Update conflict hard regs for allocnos crossing calls.

        * ira.c (ira_conflicts_p): New global.
        (ira): Define and use ira_conflicts_p.

        * reload1.c (compute_use_by_pseudos, reload, count_pseudo,
        count_spilled_pseudo, find_reg, alter_reg, finish_spills,
        emit_input_reload_insns, delete_output_reload): Use ira_conflicts_p.
        
2009-01-06  Ben Elliston  <bje@au.ibm.com>

        * gengtype-lex.l (YY_NO_INPUT): Define.

2009-01-05  Andrew Pinski  <andrew_pinski@playstation.sony.com>

        PR c/34911
        * c-common.c (handle_vector_size_attribute): Also reject
        BOOLEAN_TYPE types.

2009-01-05  Sebastian Pop  <sebastian.pop@amd.com>

        PR tree-optimization/38492
        * graphite.c (rename_map_elt, debug_rename_elt,
        debug_rename_map_1, debug_rename_map, new_rename_map_elt,
        rename_map_elt_info, eq_rename_map_elts,
        get_new_name_from_old_name, bb_in_sese_p): Moved around.
        (sese_find_uses_to_rename_use): Renamed sese_build_livein_liveouts_use.
        (sese_find_uses_to_rename_bb): Renamed sese_build_livein_liveouts_bb.
        (sese_build_livein_liveouts): New.
        (new_sese, free_sese): New.
        (new_scop): Call new_sese.
        (free_scop): Call free_sese.
        (rename_variables_from_edge, rename_phis_end_scop): Removed.
        (register_old_new_names): Renamed register_old_and_new_names.
        (register_scop_liveout_renames, add_loop_exit_phis,
        insert_loop_close_phis, struct igp,
        default_liveout_before_guard, add_guard_exit_phis,
        insert_guard_phis, copy_renames): New.
        (translate_clast): Call insert_loop_close_phis and insert_guard_phis.
        (sese_add_exit_phis_edge): Renamed scop_add_exit_phis_edge.
        (rewrite_into_sese_closed_ssa): Renamed scop_insert_phis_for_liveouts.
        (scop_adjust_phis_for_liveouts): New.
        (gloog): Call scop_adjust_phis_for_liveouts.

        * graphite.h (struct sese): Documented.  Added fields liveout,
        num_ver and livein.
        (SESE_LIVEOUT, SESE_LIVEIN, SESE_LIVEIN_VER, SESE_NUM_VER): New.
        (new_sese, free_sese, sese_build_livein_liveouts): Declared.
        (struct scop): Added field liveout_renames.
        (SCOP_LIVEOUT_RENAMES): New.

2009-01-05  Harsha Jagasia  <harsha.jagasia@amd.com>

        PR tree-optimization/38510
        * graphite.c (recompute_all_dominators): Call mark_irreducible_loops.
        (translate_clast): Call recompute_all_dominators before
        graphite_verify.
        (gloog): Call recompute_all_dominators before graphite_verify.

2009-01-05  Harsha Jagasia  <harsha.jagasia@amd.com>
            Jan Sjodin <jan.sjodin@amd.com>

        PR tree-optimization/38500
        * graphite.c (create_sese_edges): Call fix_loop_structure after
        splitting blocks.

2009-01-05  Joel Sherrill <joel.sherrill@oarcorp.com>

        * config.gcc: Add m32r*-*-rtems*.
        * config/m32r/rtems.h: New file.

2009-01-05  Ben Elliston  <bje@au.ibm.com>

        * Makefile.in (.po.gmo): Use mkinstalldirs, not test -d || mkdir.
        (.po.pox): Likewise.
        (po/gcc.pot): Likewise.

2009-01-04  David S. Miller  <davem@davemloft.net>

        * config/sparc/sparc.h (SECONDARY_MEMORY_NEEDED_RTX): Delete.
        (STARTING_FRAME_OFFSET): Always set to zero.

2009-01-04  Richard Sandiford  <rdsandiford@googlemail.com>

        * tree.def (LSHIFT_EXPR, RSHIFT_EXPR): Add commentary.
        * tree-cfg.c (verify_gimple_assign_binary): Allow shifts of
        fixed-point types, and vectors of the same.

2009-01-04  Richard Sandiford  <rdsandiford@googlemail.com>

        * config/mips/sync.md (*mb_barrier): Rename to...
        (*memory_barrier): ...this.

2009-01-04  Jonathan Wakely  <jwakely.gcc@gmail.com>

        * doc/extend.texi (Function Attributes): Move @cindex after @item
        for 'artificial' and 'flatten'. Fix grammar for 'externally_visible'
        and put in alphabetical order. Fix 'target' name and put in order.
        * doc/invoke.texi (-Wstrict-null-sentinel, -fipa-matrix-reorg): Fix
        typos.

2009-01-04  Uros Bizjak  <ubizjak@gmail.com>

        * config/s390/s390.md (UNSPEC_MB): Rename from UNSPECV_MB.
        (memory_barrier): Expand as unspec instead of unspec_volatile.
        Remove mem:BLK from insn operands.  Use Pmode scratch register.
        (*memory_barrier): Define as unspec instead of unspec_volatile.
        Use (match_dup 0) as input operand.

        * config/sparc/sparc.md (UNSPEC_MEMBAR): Rename from UNSPECV_MEMBAR.
        * config/sparc/sync.md (memory_barrier): Expand as unspec instead of
        unspec_volatile.  Remove mem:BLK from insn operands.  Use Pmode
        scratch register.  Remove operand 1.
        (*stbar): Define as unspec instead of unspec_volatile.
        Use (match_dup 0) as input operand, remove (const_int 8).
        (*membar): Define as unspec instead of unspec_volatile.
        Use (match_dup 0) as input operand, remove input operand 2.

        * config/xtensa/xtensa.md (UNSPEC_MEMW): Rename from UNSPECV_MEMW.
        (memory_barrier): Expand as unspec instead of unspec_volatile.
        Remove mem:BLK from insn operands.  Use Pmode scratch register.
        (*memory_barrier): Define as unspec instead of unspec_volatile.
        Use (match_dup 0) as input operand.

        * config/ia64/sync.md (memory_barrier): Redefine as expander pattern.
        Remove mem:BLK from insn operands.  Use Pmode scratch register.
        Set volatile flag on operand 0.
        (*memory_barrier): New insn pattern.

        * config/rs6000/sync.md (memory_barrier): Remove mem:BLK from
        insn operands.
        (*memory_barrier): Use (match_dup 0) as input operand.

        * config/mips/sync.md (memory_barrier): Redefine as expander pattern.
        Remove mem:BLK from insn operands.  Use Pmode scratch register.
        Set volatile flag on operand 0.
        (*mb_internal): New insn pattern.

        * config/alpha/sync.md (*memory_barrier): Rename from *mb_internal.

2009-01-04  Steven Bosscher  <steven@gcc.gnu.org>

        PR middle-end/38586
        * function.c (struct temp_slot): Move to the section of the file
        that deals with temp slots.  Remove field 'address'.
        (temp_slot_address_table): New hash table of address -> temp slot.
        (struct temp_slot_address_entry): New struct, items for the table.
        (temp_slot_address_compute_hash, temp_slot_address_hash,
        temp_slot_address_eq, insert_temp_slot_address): Support functions
        for the new table.
        (find_temp_slot_from_address): Rewrite to use the new hash table.
        (remove_unused_temp_slot_addresses): Remove addresses of temp
        slots that have been made available.
        (remove_unused_temp_slot_addresses_1): Call-back for htab_traverse,
        worker function for remove_unused_temp_slot_addresses.
        (assign_stack_temp_for_type): Don't clear the temp slot address list.
        Add the temp slot address to the address -> temp slot map.
        (update_temp_slot_address): Update via insert_temp_slot_address.
        (free_temp_slots): Call remove_unused_temp_slot_addresses.
        (pop_temp_slots): Likewise.
        (init_temp_slots): Allocate the address -> temp slot map, or empty
        the map if it is already allocated.
        (prepare_function_start): Initialize temp slot processing.

2009-01-04  Steven Bosscher  <steven@gcc.gnu.org>

        PR middle-end/38584
        * cfgexpand.c (estimate_stack_frame_size): Simplify the estimate:
        Calculate the size of all stack vars assuming no packing of stack
        vars will happen, replacing a quadratic algorithm with a linear one.

2009-01-03  Jakub Jelinek  <jakub@redhat.com>

        PR target/38707
        * expmed.c (store_bit_field_1): Don't modify op0 if movstrict insn
        can't be used.

2009-01-03  Diego Novillo  <dnovillo@google.com>

        * doc/contrib.texi: Update contributions.

2009-01-03  Jakub Jelinek  <jakub@redhat.com>

        PR c++/38705
        * builtins.c (fold_builtin_memory_op): Give up if either operand
        is volatile.  Set srctype or desttype to non-qualified version
        of the other type.

        PR c/38700
        * builtins.c (fold_builtin_expect): Only check DECL_WEAK for VAR_DECLs
        and FUNCTION_DECLs.

2009-01-02  Kenneth Zadeck <zadeck@naturalbridge.com>

        PR rtl-optimization/35805
        * df-problems.c (df_lr_finalize): Add recursive call to resolve lr
        problem if fast dce is able to remove any instructions.
        * dce.c (dce_process_block): Fix dump message.
        
2009-01-02  Mark Mitchell  <mark@codesourcery.com>

        PR 33649
        * tree-ssa-pre.c (compute_antic): Correct loop bounds.

2009-01-02  Jakub Jelinek  <jakub@redhat.com>

        PR middle-end/38690
        * tree-flow.h (op_code_prio, op_prio): New prototypes.
        * tree-pretty-print.c (op_code_prio): New function.
        (op_prio): No longer static.  Use op_code_prio.
        * gimple-pretty-print.c (dump_unary_rhs, dump_binary_rhs):
        Use op_prio and op_code_prio to determine if () should be
        printed around operand(s) or not.

        * gimple-pretty-print.c (dump_unary_rhs, dump_binary_rhs,
        dump_gimple_call, dump_gimple_switch, dump_gimple_cond,
        dump_gimple_label, dump_gimple_try, dump_symbols, dump_gimple_phi,
        dump_gimple_mem_ops, dump_bb_header, dump_bb_end, pp_cfg_jump): Use
        pp_character instead of pp_string for single letter printing.

2009-01-02  Richard Sandiford  <rdsandiford@googlemail.com>

        * doc/extend.texi: Fix '#pragma GCC option' typo.

2009-01-02 Richard Guenther <rguenther@suse.de>

        * doc/install.texi (--enable-checking): Mention different
        default for stage1.
        (--enable-stage1-checking): Document.

2009-01-01  Andrew Pinski  <pinskia@gmail.com>

        PR middle-end/30142
        * tree-cfg.c (verify_expr): Add INDIRECT_REF case.  Change MODIFY_EXPR
        case to be an error.

2009-01-02  Ben Elliston  <bje@au.ibm.com>

        * config/fp-bit.h (pack_d): Constify argument.
        * config/fp-bit.c (makenan): Constify return type. Remove casts.
        (isnan): Constify argument.
        (isinf): Likewise.
        (iszero): Likewise.
        (pack_d): Likewise.
        (_fpadd_parts): Constify return type.
        (_fpmul_parts): Likewise.
        (_fpdiv_parts): Likewise.

2009-01-01  Jakub Jelinek  <jakub@redhat.com>

        PR c/36489
        * c-typeck.c (add_pending_init): Add IMPLICIT argument.  Only
        warn about overwriting initializer with side-effects or
        -Woverride-init if !IMPLICIT.
        (output_init_element): Likewise.  Pass IMPLICIT down to
        add_pending_init.
        (process_init_element): Add IMPLICIT argument.  Pass it down
        to output_init_element.
        (push_init_element, pop_init_level, set_designator): Adjust
        process_init_element callers.
        (set_nonincremental_init, set_nonincremental_init_from_string):
        Adjust add_pending_init callers.
        (output_pending_init_elements): Adjust output_init_element callers.
        * c-tree.h (process_init_element): Adjust prototype.
        * c-parser.c (c_parser_initelt, c_parser_initval): Adjust
        process_init_element callers.