2 /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
\r
3 * All rights reserved.
\r
5 * This package is an SSL implementation written
\r
6 * by Eric Young (eay@cryptsoft.com).
\r
7 * The implementation was written so as to conform with Netscapes SSL.
\r
9 * This library is free for commercial and non-commercial use as long as
\r
10 * the following conditions are aheared to. The following conditions
\r
11 * apply to all code found in this distribution, be it the RC4, RSA,
\r
12 * lhash, DES, etc., code; not just the SSL code. The SSL documentation
\r
13 * included with this distribution is covered by the same copyright terms
\r
14 * except that the holder is Tim Hudson (tjh@cryptsoft.com).
\r
16 * Copyright remains Eric Young's, and as such any Copyright notices in
\r
17 * the code are not to be removed.
\r
18 * If this package is used in a product, Eric Young should be given attribution
\r
19 * as the author of the parts of the library used.
\r
20 * This can be in the form of a textual message at program startup or
\r
21 * in documentation (online or textual) provided with the package.
\r
23 * Redistribution and use in source and binary forms, with or without
\r
24 * modification, are permitted provided that the following conditions
\r
26 * 1. Redistributions of source code must retain the copyright
\r
27 * notice, this list of conditions and the following disclaimer.
\r
28 * 2. Redistributions in binary form must reproduce the above copyright
\r
29 * notice, this list of conditions and the following disclaimer in the
\r
30 * documentation and/or other materials provided with the distribution.
\r
31 * 3. All advertising materials mentioning features or use of this software
\r
32 * must display the following acknowledgement:
\r
33 * "This product includes cryptographic software written by
\r
34 * Eric Young (eay@cryptsoft.com)"
\r
35 * The word 'cryptographic' can be left out if the rouines from the library
\r
36 * being used are not cryptographic related :-).
\r
37 * 4. If you include any Windows specific code (or a derivative thereof) from
\r
38 * the apps directory (application code) you must include an acknowledgement:
\r
39 * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
\r
41 * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
\r
42 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
\r
43 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
\r
44 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
\r
45 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
\r
46 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
\r
47 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
\r
48 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
\r
49 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
\r
50 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
\r
53 * The licence and distribution terms for any publically available version or
\r
54 * derivative of this code cannot be changed. i.e. this code cannot simply be
\r
55 * copied and put under another distribution licence
\r
56 * [including the GNU Public Licence.]
\r
58 /* ====================================================================
\r
59 * Copyright (c) 1998-2007 The OpenSSL Project. All rights reserved.
\r
61 * Redistribution and use in source and binary forms, with or without
\r
62 * modification, are permitted provided that the following conditions
\r
65 * 1. Redistributions of source code must retain the above copyright
\r
66 * notice, this list of conditions and the following disclaimer.
\r
68 * 2. Redistributions in binary form must reproduce the above copyright
\r
69 * notice, this list of conditions and the following disclaimer in
\r
70 * the documentation and/or other materials provided with the
\r
73 * 3. All advertising materials mentioning features or use of this
\r
74 * software must display the following acknowledgment:
\r
75 * "This product includes software developed by the OpenSSL Project
\r
76 * for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
\r
78 * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
\r
79 * endorse or promote products derived from this software without
\r
80 * prior written permission. For written permission, please contact
\r
81 * openssl-core@openssl.org.
\r
83 * 5. Products derived from this software may not be called "OpenSSL"
\r
84 * nor may "OpenSSL" appear in their names without prior written
\r
85 * permission of the OpenSSL Project.
\r
87 * 6. Redistributions of any form whatsoever must retain the following
\r
89 * "This product includes software developed by the OpenSSL Project
\r
90 * for use in the OpenSSL Toolkit (http://www.openssl.org/)"
\r
92 * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
\r
93 * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
\r
94 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
\r
95 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
\r
96 * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
\r
97 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
\r
98 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
\r
99 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
\r
100 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
\r
101 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
\r
102 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
\r
103 * OF THE POSSIBILITY OF SUCH DAMAGE.
\r
104 * ====================================================================
\r
106 * This product includes cryptographic software written by Eric Young
\r
107 * (eay@cryptsoft.com). This product includes software written by Tim
\r
108 * Hudson (tjh@cryptsoft.com).
\r
111 /* ====================================================================
\r
112 * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
\r
113 * ECC cipher suite support in OpenSSL originally developed by
\r
114 * SUN MICROSYSTEMS, INC., and contributed to the OpenSSL project.
\r
116 /* ====================================================================
\r
117 * Copyright 2005 Nokia. All rights reserved.
\r
119 * The portions of the attached software ("Contribution") is developed by
\r
120 * Nokia Corporation and is licensed pursuant to the OpenSSL open source
\r
123 * The Contribution, originally written by Mika Kousa and Pasi Eronen of
\r
124 * Nokia Corporation, consists of the "PSK" (Pre-Shared Key) ciphersuites
\r
125 * support (see RFC 4279) to OpenSSL.
\r
127 * No patent licenses or other rights except those expressly stated in
\r
128 * the OpenSSL open source license shall be deemed granted or received
\r
129 * expressly, by implication, estoppel, or otherwise.
\r
131 * No assurances are provided by Nokia that the Contribution does not
\r
132 * infringe the patent or other intellectual property rights of any third
\r
133 * party or that the license provides you with all the necessary rights
\r
134 * to make use of the Contribution.
\r
136 * THE SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. IN
\r
137 * ADDITION TO THE DISCLAIMERS INCLUDED IN THE LICENSE, NOKIA
\r
138 * SPECIFICALLY DISCLAIMS ANY LIABILITY FOR CLAIMS BROUGHT BY YOU OR ANY
\r
139 * OTHER ENTITY BASED ON INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS OR
\r
143 #ifndef HEADER_SSL_H
\r
144 #define HEADER_SSL_H
\r
146 #include <openssl/e_os2.h>
\r
148 #ifndef OPENSSL_NO_COMP
\r
149 #include <openssl/comp.h>
\r
151 #ifndef OPENSSL_NO_BIO
\r
152 #include <openssl/bio.h>
\r
154 #ifndef OPENSSL_NO_DEPRECATED
\r
155 #ifndef OPENSSL_NO_X509
\r
156 #include <openssl/x509.h>
\r
158 #include <openssl/crypto.h>
\r
159 #include <openssl/lhash.h>
\r
160 #include <openssl/buffer.h>
\r
162 #include <openssl/pem.h>
\r
163 #include <openssl/hmac.h>
\r
165 #include <openssl/kssl.h>
\r
166 #include <openssl/safestack.h>
\r
167 #include <openssl/symhacks.h>
\r
173 /* SSLeay version number for ASN.1 encoding of the session information */
\r
174 /* Version 0 - initial version
\r
175 * Version 1 - added the optional peer certificate
\r
177 #define SSL_SESSION_ASN1_VERSION 0x0001
\r
179 /* text strings for the ciphers */
\r
180 #define SSL_TXT_NULL_WITH_MD5 SSL2_TXT_NULL_WITH_MD5
\r
181 #define SSL_TXT_RC4_128_WITH_MD5 SSL2_TXT_RC4_128_WITH_MD5
\r
182 #define SSL_TXT_RC4_128_EXPORT40_WITH_MD5 SSL2_TXT_RC4_128_EXPORT40_WITH_MD5
\r
183 #define SSL_TXT_RC2_128_CBC_WITH_MD5 SSL2_TXT_RC2_128_CBC_WITH_MD5
\r
184 #define SSL_TXT_RC2_128_CBC_EXPORT40_WITH_MD5 SSL2_TXT_RC2_128_CBC_EXPORT40_WITH_MD5
\r
185 #define SSL_TXT_IDEA_128_CBC_WITH_MD5 SSL2_TXT_IDEA_128_CBC_WITH_MD5
\r
186 #define SSL_TXT_DES_64_CBC_WITH_MD5 SSL2_TXT_DES_64_CBC_WITH_MD5
\r
187 #define SSL_TXT_DES_64_CBC_WITH_SHA SSL2_TXT_DES_64_CBC_WITH_SHA
\r
188 #define SSL_TXT_DES_192_EDE3_CBC_WITH_MD5 SSL2_TXT_DES_192_EDE3_CBC_WITH_MD5
\r
189 #define SSL_TXT_DES_192_EDE3_CBC_WITH_SHA SSL2_TXT_DES_192_EDE3_CBC_WITH_SHA
\r
191 /* VRS Additional Kerberos5 entries
\r
193 #define SSL_TXT_KRB5_DES_64_CBC_SHA SSL3_TXT_KRB5_DES_64_CBC_SHA
\r
194 #define SSL_TXT_KRB5_DES_192_CBC3_SHA SSL3_TXT_KRB5_DES_192_CBC3_SHA
\r
195 #define SSL_TXT_KRB5_RC4_128_SHA SSL3_TXT_KRB5_RC4_128_SHA
\r
196 #define SSL_TXT_KRB5_IDEA_128_CBC_SHA SSL3_TXT_KRB5_IDEA_128_CBC_SHA
\r
197 #define SSL_TXT_KRB5_DES_64_CBC_MD5 SSL3_TXT_KRB5_DES_64_CBC_MD5
\r
198 #define SSL_TXT_KRB5_DES_192_CBC3_MD5 SSL3_TXT_KRB5_DES_192_CBC3_MD5
\r
199 #define SSL_TXT_KRB5_RC4_128_MD5 SSL3_TXT_KRB5_RC4_128_MD5
\r
200 #define SSL_TXT_KRB5_IDEA_128_CBC_MD5 SSL3_TXT_KRB5_IDEA_128_CBC_MD5
\r
202 #define SSL_TXT_KRB5_DES_40_CBC_SHA SSL3_TXT_KRB5_DES_40_CBC_SHA
\r
203 #define SSL_TXT_KRB5_RC2_40_CBC_SHA SSL3_TXT_KRB5_RC2_40_CBC_SHA
\r
204 #define SSL_TXT_KRB5_RC4_40_SHA SSL3_TXT_KRB5_RC4_40_SHA
\r
205 #define SSL_TXT_KRB5_DES_40_CBC_MD5 SSL3_TXT_KRB5_DES_40_CBC_MD5
\r
206 #define SSL_TXT_KRB5_RC2_40_CBC_MD5 SSL3_TXT_KRB5_RC2_40_CBC_MD5
\r
207 #define SSL_TXT_KRB5_RC4_40_MD5 SSL3_TXT_KRB5_RC4_40_MD5
\r
209 #define SSL_TXT_KRB5_DES_40_CBC_SHA SSL3_TXT_KRB5_DES_40_CBC_SHA
\r
210 #define SSL_TXT_KRB5_DES_40_CBC_MD5 SSL3_TXT_KRB5_DES_40_CBC_MD5
\r
211 #define SSL_TXT_KRB5_DES_64_CBC_SHA SSL3_TXT_KRB5_DES_64_CBC_SHA
\r
212 #define SSL_TXT_KRB5_DES_64_CBC_MD5 SSL3_TXT_KRB5_DES_64_CBC_MD5
\r
213 #define SSL_TXT_KRB5_DES_192_CBC3_SHA SSL3_TXT_KRB5_DES_192_CBC3_SHA
\r
214 #define SSL_TXT_KRB5_DES_192_CBC3_MD5 SSL3_TXT_KRB5_DES_192_CBC3_MD5
\r
215 #define SSL_MAX_KRB5_PRINCIPAL_LENGTH 256
\r
217 #define SSL_MAX_SSL_SESSION_ID_LENGTH 32
\r
218 #define SSL_MAX_SID_CTX_LENGTH 32
\r
220 #define SSL_MIN_RSA_MODULUS_LENGTH_IN_BYTES (512/8)
\r
221 #define SSL_MAX_KEY_ARG_LENGTH 8
\r
222 #define SSL_MAX_MASTER_KEY_LENGTH 48
\r
225 /* These are used to specify which ciphers to use and not to use */
\r
227 #define SSL_TXT_EXP40 "EXPORT40"
\r
228 #define SSL_TXT_EXP56 "EXPORT56"
\r
229 #define SSL_TXT_LOW "LOW"
\r
230 #define SSL_TXT_MEDIUM "MEDIUM"
\r
231 #define SSL_TXT_HIGH "HIGH"
\r
232 #define SSL_TXT_FIPS "FIPS"
\r
234 #define SSL_TXT_kFZA "kFZA" /* unused! */
\r
235 #define SSL_TXT_aFZA "aFZA" /* unused! */
\r
236 #define SSL_TXT_eFZA "eFZA" /* unused! */
\r
237 #define SSL_TXT_FZA "FZA" /* unused! */
\r
239 #define SSL_TXT_aNULL "aNULL"
\r
240 #define SSL_TXT_eNULL "eNULL"
\r
241 #define SSL_TXT_NULL "NULL"
\r
243 #define SSL_TXT_kRSA "kRSA"
\r
244 #define SSL_TXT_kDHr "kDHr" /* no such ciphersuites supported! */
\r
245 #define SSL_TXT_kDHd "kDHd" /* no such ciphersuites supported! */
\r
246 #define SSL_TXT_kDH "kDH" /* no such ciphersuites supported! */
\r
247 #define SSL_TXT_kEDH "kEDH"
\r
248 #define SSL_TXT_kKRB5 "kKRB5"
\r
249 #define SSL_TXT_kECDHr "kECDHr"
\r
250 #define SSL_TXT_kECDHe "kECDHe"
\r
251 #define SSL_TXT_kECDH "kECDH"
\r
252 #define SSL_TXT_kEECDH "kEECDH"
\r
253 #define SSL_TXT_kPSK "kPSK"
\r
254 #define SSL_TXT_kGOST "kGOST"
\r
256 #define SSL_TXT_aRSA "aRSA"
\r
257 #define SSL_TXT_aDSS "aDSS"
\r
258 #define SSL_TXT_aDH "aDH" /* no such ciphersuites supported! */
\r
259 #define SSL_TXT_aECDH "aECDH"
\r
260 #define SSL_TXT_aKRB5 "aKRB5"
\r
261 #define SSL_TXT_aECDSA "aECDSA"
\r
262 #define SSL_TXT_aPSK "aPSK"
\r
263 #define SSL_TXT_aGOST94 "aGOST94"
\r
264 #define SSL_TXT_aGOST01 "aGOST01"
\r
265 #define SSL_TXT_aGOST "aGOST"
\r
267 #define SSL_TXT_DSS "DSS"
\r
268 #define SSL_TXT_DH "DH"
\r
269 #define SSL_TXT_EDH "EDH" /* same as "kEDH:-ADH" */
\r
270 #define SSL_TXT_ADH "ADH"
\r
271 #define SSL_TXT_RSA "RSA"
\r
272 #define SSL_TXT_ECDH "ECDH"
\r
273 #define SSL_TXT_EECDH "EECDH" /* same as "kEECDH:-AECDH" */
\r
274 #define SSL_TXT_AECDH "AECDH"
\r
275 #define SSL_TXT_ECDSA "ECDSA"
\r
276 #define SSL_TXT_KRB5 "KRB5"
\r
277 #define SSL_TXT_PSK "PSK"
\r
279 #define SSL_TXT_DES "DES"
\r
280 #define SSL_TXT_3DES "3DES"
\r
281 #define SSL_TXT_RC4 "RC4"
\r
282 #define SSL_TXT_RC2 "RC2"
\r
283 #define SSL_TXT_IDEA "IDEA"
\r
284 #define SSL_TXT_SEED "SEED"
\r
285 #define SSL_TXT_AES128 "AES128"
\r
286 #define SSL_TXT_AES256 "AES256"
\r
287 #define SSL_TXT_AES "AES"
\r
288 #define SSL_TXT_CAMELLIA128 "CAMELLIA128"
\r
289 #define SSL_TXT_CAMELLIA256 "CAMELLIA256"
\r
290 #define SSL_TXT_CAMELLIA "CAMELLIA"
\r
292 #define SSL_TXT_MD5 "MD5"
\r
293 #define SSL_TXT_SHA1 "SHA1"
\r
294 #define SSL_TXT_SHA "SHA" /* same as "SHA1" */
\r
295 #define SSL_TXT_GOST94 "GOST94"
\r
296 #define SSL_TXT_GOST89MAC "GOST89MAC"
\r
298 #define SSL_TXT_SSLV2 "SSLv2"
\r
299 #define SSL_TXT_SSLV3 "SSLv3"
\r
300 #define SSL_TXT_TLSV1 "TLSv1"
\r
302 #define SSL_TXT_EXP "EXP"
\r
303 #define SSL_TXT_EXPORT "EXPORT"
\r
305 #define SSL_TXT_ALL "ALL"
\r
308 * COMPLEMENTOF* definitions. These identifiers are used to (de-select)
\r
309 * ciphers normally not being used.
\r
310 * Example: "RC4" will activate all ciphers using RC4 including ciphers
\r
311 * without authentication, which would normally disabled by DEFAULT (due
\r
312 * the "!ADH" being part of default). Therefore "RC4:!COMPLEMENTOFDEFAULT"
\r
313 * will make sure that it is also disabled in the specific selection.
\r
314 * COMPLEMENTOF* identifiers are portable between version, as adjustments
\r
315 * to the default cipher setup will also be included here.
\r
317 * COMPLEMENTOFDEFAULT does not experience the same special treatment that
\r
318 * DEFAULT gets, as only selection is being done and no sorting as needed
\r
321 #define SSL_TXT_CMPALL "COMPLEMENTOFALL"
\r
322 #define SSL_TXT_CMPDEF "COMPLEMENTOFDEFAULT"
\r
324 /* The following cipher list is used by default.
\r
325 * It also is substituted when an application-defined cipher list string
\r
326 * starts with 'DEFAULT'. */
\r
327 #define SSL_DEFAULT_CIPHER_LIST "ALL:!aNULL:!eNULL:!SSLv2"
\r
328 /* As of OpenSSL 1.0.0, ssl_create_cipher_list() in ssl/ssl_ciph.c always
\r
329 * starts with a reasonable order, and all we have to do for DEFAULT is
\r
330 * throwing out anonymous and unencrypted ciphersuites!
\r
331 * (The latter are not actually enabled by ALL, but "ALL:RSA" would enable
\r
335 /* Used in SSL_set_shutdown()/SSL_get_shutdown(); */
\r
336 #define SSL_SENT_SHUTDOWN 1
\r
337 #define SSL_RECEIVED_SHUTDOWN 2
\r
347 #if (defined(OPENSSL_NO_RSA) || defined(OPENSSL_NO_MD5)) && !defined(OPENSSL_NO_SSL2)
\r
348 #define OPENSSL_NO_SSL2
\r
351 #define SSL_FILETYPE_ASN1 X509_FILETYPE_ASN1
\r
352 #define SSL_FILETYPE_PEM X509_FILETYPE_PEM
\r
354 /* This is needed to stop compilers complaining about the
\r
355 * 'struct ssl_st *' function parameters used to prototype callbacks
\r
357 typedef struct ssl_st *ssl_crock_st;
\r
358 typedef struct tls_session_ticket_ext_st TLS_SESSION_TICKET_EXT;
\r
360 /* used to hold info on the particular ciphers used */
\r
361 typedef struct ssl_cipher_st
\r
364 const char *name; /* text name */
\r
365 unsigned long id; /* id, 4 bytes, first is version */
\r
367 /* changed in 0.9.9: these four used to be portions of a single value 'algorithms' */
\r
368 unsigned long algorithm_mkey; /* key exchange algorithm */
\r
369 unsigned long algorithm_auth; /* server authentication */
\r
370 unsigned long algorithm_enc; /* symmetric encryption */
\r
371 unsigned long algorithm_mac; /* symmetric authentication */
\r
372 unsigned long algorithm_ssl; /* (major) protocol version */
\r
374 unsigned long algo_strength; /* strength and export flags */
\r
375 unsigned long algorithm2; /* Extra flags */
\r
376 int strength_bits; /* Number of bits really used */
\r
377 int alg_bits; /* Number of bits for algorithm */
\r
380 DECLARE_STACK_OF(SSL_CIPHER)
\r
382 typedef int (*tls_session_ticket_ext_cb_fn)(SSL *s, const unsigned char *data, int len, void *arg);
\r
383 typedef int (*tls_session_secret_cb_fn)(SSL *s, void *secret, int *secret_len, STACK_OF(SSL_CIPHER) *peer_ciphers, SSL_CIPHER **cipher, void *arg);
\r
385 /* Used to hold functions for SSLv2 or SSLv3/TLSv1 functions */
\r
386 typedef struct ssl_method_st
\r
389 int (*ssl_new)(SSL *s);
\r
390 void (*ssl_clear)(SSL *s);
\r
391 void (*ssl_free)(SSL *s);
\r
392 int (*ssl_accept)(SSL *s);
\r
393 int (*ssl_connect)(SSL *s);
\r
394 int (*ssl_read)(SSL *s,void *buf,int len);
\r
395 int (*ssl_peek)(SSL *s,void *buf,int len);
\r
396 int (*ssl_write)(SSL *s,const void *buf,int len);
\r
397 int (*ssl_shutdown)(SSL *s);
\r
398 int (*ssl_renegotiate)(SSL *s);
\r
399 int (*ssl_renegotiate_check)(SSL *s);
\r
400 long (*ssl_get_message)(SSL *s, int st1, int stn, int mt, long
\r
402 int (*ssl_read_bytes)(SSL *s, int type, unsigned char *buf, int len,
\r
404 int (*ssl_write_bytes)(SSL *s, int type, const void *buf_, int len);
\r
405 int (*ssl_dispatch_alert)(SSL *s);
\r
406 long (*ssl_ctrl)(SSL *s,int cmd,long larg,void *parg);
\r
407 long (*ssl_ctx_ctrl)(SSL_CTX *ctx,int cmd,long larg,void *parg);
\r
408 const SSL_CIPHER *(*get_cipher_by_char)(const unsigned char *ptr);
\r
409 int (*put_cipher_by_char)(const SSL_CIPHER *cipher,unsigned char *ptr);
\r
410 int (*ssl_pending)(const SSL *s);
\r
411 int (*num_ciphers)(void);
\r
412 const SSL_CIPHER *(*get_cipher)(unsigned ncipher);
\r
413 const struct ssl_method_st *(*get_ssl_method)(int version);
\r
414 long (*get_timeout)(void);
\r
415 struct ssl3_enc_method *ssl3_enc; /* Extra SSLv3/TLS stuff */
\r
416 int (*ssl_version)(void);
\r
417 long (*ssl_callback_ctrl)(SSL *s, int cb_id, void (*fp)(void));
\r
418 long (*ssl_ctx_callback_ctrl)(SSL_CTX *s, int cb_id, void (*fp)(void));
\r
421 /* Lets make this into an ASN.1 type structure as follows
\r
422 * SSL_SESSION_ID ::= SEQUENCE {
\r
423 * version INTEGER, -- structure version number
\r
424 * SSLversion INTEGER, -- SSL version number
\r
425 * Cipher OCTET STRING, -- the 3 byte cipher ID
\r
426 * Session_ID OCTET STRING, -- the Session ID
\r
427 * Master_key OCTET STRING, -- the master key
\r
428 * KRB5_principal OCTET STRING -- optional Kerberos principal
\r
429 * Key_Arg [ 0 ] IMPLICIT OCTET STRING, -- the optional Key argument
\r
430 * Time [ 1 ] EXPLICIT INTEGER, -- optional Start Time
\r
431 * Timeout [ 2 ] EXPLICIT INTEGER, -- optional Timeout ins seconds
\r
432 * Peer [ 3 ] EXPLICIT X509, -- optional Peer Certificate
\r
433 * Session_ID_context [ 4 ] EXPLICIT OCTET STRING, -- the Session ID context
\r
434 * Verify_result [ 5 ] EXPLICIT INTEGER, -- X509_V_... code for `Peer'
\r
435 * HostName [ 6 ] EXPLICIT OCTET STRING, -- optional HostName from servername TLS extension
\r
436 * ECPointFormatList [ 7 ] OCTET STRING, -- optional EC point format list from TLS extension
\r
437 * PSK_identity_hint [ 8 ] EXPLICIT OCTET STRING, -- optional PSK identity hint
\r
438 * PSK_identity [ 9 ] EXPLICIT OCTET STRING -- optional PSK identity
\r
440 * Look in ssl/ssl_asn1.c for more details
\r
441 * I'm using EXPLICIT tags so I can read the damn things using asn1parse :-).
\r
443 typedef struct ssl_session_st
\r
445 int ssl_version; /* what ssl version session info is
\r
446 * being kept in here? */
\r
448 /* only really used in SSLv2 */
\r
449 unsigned int key_arg_length;
\r
450 unsigned char key_arg[SSL_MAX_KEY_ARG_LENGTH];
\r
451 int master_key_length;
\r
452 unsigned char master_key[SSL_MAX_MASTER_KEY_LENGTH];
\r
453 /* session_id - valid? */
\r
454 unsigned int session_id_length;
\r
455 unsigned char session_id[SSL_MAX_SSL_SESSION_ID_LENGTH];
\r
456 /* this is used to determine whether the session is being reused in
\r
457 * the appropriate context. It is up to the application to set this,
\r
459 unsigned int sid_ctx_length;
\r
460 unsigned char sid_ctx[SSL_MAX_SID_CTX_LENGTH];
\r
462 #ifndef OPENSSL_NO_KRB5
\r
463 unsigned int krb5_client_princ_len;
\r
464 unsigned char krb5_client_princ[SSL_MAX_KRB5_PRINCIPAL_LENGTH];
\r
465 #endif /* OPENSSL_NO_KRB5 */
\r
466 #ifndef OPENSSL_NO_PSK
\r
467 char *psk_identity_hint;
\r
468 char *psk_identity;
\r
472 /* The cert is the certificate used to establish this connection */
\r
473 struct sess_cert_st /* SESS_CERT */ *sess_cert;
\r
475 /* This is the cert for the other end.
\r
476 * On clients, it will be the same as sess_cert->peer_key->x509
\r
477 * (the latter is not enough as sess_cert is not retained
\r
478 * in the external representation of sessions, see ssl_asn1.c). */
\r
480 /* when app_verify_callback accepts a session where the peer's certificate
\r
481 * is not ok, we must remember the error for session reuse: */
\r
482 long verify_result; /* only for servers */
\r
488 unsigned int compress_meth; /* Need to lookup the method */
\r
490 const SSL_CIPHER *cipher;
\r
491 unsigned long cipher_id; /* when ASN.1 loaded, this
\r
492 * needs to be used to load
\r
493 * the 'cipher' structure */
\r
495 STACK_OF(SSL_CIPHER) *ciphers; /* shared ciphers? */
\r
497 CRYPTO_EX_DATA ex_data; /* application specific data */
\r
499 /* These are used to make removal of session-ids more
\r
500 * efficient and to implement a maximum cache size. */
\r
501 struct ssl_session_st *prev,*next;
\r
502 #ifndef OPENSSL_NO_TLSEXT
\r
503 char *tlsext_hostname;
\r
504 #ifndef OPENSSL_NO_EC
\r
505 size_t tlsext_ecpointformatlist_length;
\r
506 unsigned char *tlsext_ecpointformatlist; /* peer's list */
\r
507 size_t tlsext_ellipticcurvelist_length;
\r
508 unsigned char *tlsext_ellipticcurvelist; /* peer's list */
\r
509 #endif /* OPENSSL_NO_EC */
\r
511 unsigned char *tlsext_tick; /* Session ticket */
\r
512 size_t tlsext_ticklen; /* Session ticket length */
\r
513 long tlsext_tick_lifetime_hint; /* Session lifetime hint in seconds */
\r
518 #define SSL_OP_MICROSOFT_SESS_ID_BUG 0x00000001L
\r
519 #define SSL_OP_NETSCAPE_CHALLENGE_BUG 0x00000002L
\r
520 /* Allow initial connection to servers that don't support RI */
\r
521 #define SSL_OP_LEGACY_SERVER_CONNECT 0x00000004L
\r
522 #define SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG 0x00000008L
\r
523 #define SSL_OP_SSLREF2_REUSE_CERT_TYPE_BUG 0x00000010L
\r
524 #define SSL_OP_MICROSOFT_BIG_SSLV3_BUFFER 0x00000020L
\r
525 #define SSL_OP_MSIE_SSLV2_RSA_PADDING 0x00000040L /* no effect since 0.9.7h and 0.9.8b */
\r
526 #define SSL_OP_SSLEAY_080_CLIENT_DH_BUG 0x00000080L
\r
527 #define SSL_OP_TLS_D5_BUG 0x00000100L
\r
528 #define SSL_OP_TLS_BLOCK_PADDING_BUG 0x00000200L
\r
530 /* Disable SSL 3.0/TLS 1.0 CBC vulnerability workaround that was added
\r
531 * in OpenSSL 0.9.6d. Usually (depending on the application protocol)
\r
532 * the workaround is not needed. Unfortunately some broken SSL/TLS
\r
533 * implementations cannot handle it at all, which is why we include
\r
534 * it in SSL_OP_ALL. */
\r
535 #define SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS 0x00000800L /* added in 0.9.6e */
\r
537 /* SSL_OP_ALL: various bug workarounds that should be rather harmless.
\r
538 * This used to be 0x000FFFFFL before 0.9.7. */
\r
539 #define SSL_OP_ALL 0x80000FFFL
\r
542 #define SSL_OP_NO_QUERY_MTU 0x00001000L
\r
543 /* Turn on Cookie Exchange (on relevant for servers) */
\r
544 #define SSL_OP_COOKIE_EXCHANGE 0x00002000L
\r
545 /* Don't use RFC4507 ticket extension */
\r
546 #define SSL_OP_NO_TICKET 0x00004000L
\r
547 /* Use Cisco's "speshul" version of DTLS_BAD_VER (as client) */
\r
548 #define SSL_OP_CISCO_ANYCONNECT 0x00008000L
\r
550 /* As server, disallow session resumption on renegotiation */
\r
551 #define SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION 0x00010000L
\r
552 /* Don't use compression even if supported */
\r
553 #define SSL_OP_NO_COMPRESSION 0x00020000L
\r
554 /* Permit unsafe legacy renegotiation */
\r
555 #define SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION 0x00040000L
\r
556 /* If set, always create a new key when using tmp_ecdh parameters */
\r
557 #define SSL_OP_SINGLE_ECDH_USE 0x00080000L
\r
558 /* If set, always create a new key when using tmp_dh parameters */
\r
559 #define SSL_OP_SINGLE_DH_USE 0x00100000L
\r
560 /* Set to always use the tmp_rsa key when doing RSA operations,
\r
561 * even when this violates protocol specs */
\r
562 #define SSL_OP_EPHEMERAL_RSA 0x00200000L
\r
563 /* Set on servers to choose the cipher according to the server's
\r
565 #define SSL_OP_CIPHER_SERVER_PREFERENCE 0x00400000L
\r
566 /* If set, a server will allow a client to issue a SSLv3.0 version number
\r
567 * as latest version supported in the premaster secret, even when TLSv1.0
\r
568 * (version 3.1) was announced in the client hello. Normally this is
\r
569 * forbidden to prevent version rollback attacks. */
\r
570 #define SSL_OP_TLS_ROLLBACK_BUG 0x00800000L
\r
572 #define SSL_OP_NO_SSLv2 0x01000000L
\r
573 #define SSL_OP_NO_SSLv3 0x02000000L
\r
574 #define SSL_OP_NO_TLSv1 0x04000000L
\r
576 /* The next flag deliberately changes the ciphertest, this is a check
\r
577 * for the PKCS#1 attack */
\r
578 #define SSL_OP_PKCS1_CHECK_1 0x08000000L
\r
579 #define SSL_OP_PKCS1_CHECK_2 0x10000000L
\r
580 #define SSL_OP_NETSCAPE_CA_DN_BUG 0x20000000L
\r
581 #define SSL_OP_NETSCAPE_DEMO_CIPHER_CHANGE_BUG 0x40000000L
\r
582 /* Make server add server-hello extension from early version of
\r
583 * cryptopro draft, when GOST ciphersuite is negotiated.
\r
584 * Required for interoperability with CryptoPro CSP 3.x
\r
586 #define SSL_OP_CRYPTOPRO_TLSEXT_BUG 0x80000000L
\r
588 /* Allow SSL_write(..., n) to return r with 0 < r < n (i.e. report success
\r
589 * when just a single record has been written): */
\r
590 #define SSL_MODE_ENABLE_PARTIAL_WRITE 0x00000001L
\r
591 /* Make it possible to retry SSL_write() with changed buffer location
\r
592 * (buffer contents must stay the same!); this is not the default to avoid
\r
593 * the misconception that non-blocking SSL_write() behaves like
\r
594 * non-blocking write(): */
\r
595 #define SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER 0x00000002L
\r
596 /* Never bother the application with retries if the transport
\r
598 #define SSL_MODE_AUTO_RETRY 0x00000004L
\r
599 /* Don't attempt to automatically build certificate chain */
\r
600 #define SSL_MODE_NO_AUTO_CHAIN 0x00000008L
\r
601 /* Save RAM by releasing read and write buffers when they're empty. (SSL3 and
\r
602 * TLS only.) "Released" buffers are put onto a free-list in the context
\r
603 * or just freed (depending on the context's setting for freelist_max_len). */
\r
604 #define SSL_MODE_RELEASE_BUFFERS 0x00000010L
\r
606 /* Note: SSL[_CTX]_set_{options,mode} use |= op on the previous value,
\r
607 * they cannot be used to clear bits. */
\r
609 #define SSL_CTX_set_options(ctx,op) \
\r
610 SSL_CTX_ctrl((ctx),SSL_CTRL_OPTIONS,(op),NULL)
\r
611 #define SSL_CTX_clear_options(ctx,op) \
\r
612 SSL_CTX_ctrl((ctx),SSL_CTRL_CLEAR_OPTIONS,(op),NULL)
\r
613 #define SSL_CTX_get_options(ctx) \
\r
614 SSL_CTX_ctrl((ctx),SSL_CTRL_OPTIONS,0,NULL)
\r
615 #define SSL_set_options(ssl,op) \
\r
616 SSL_ctrl((ssl),SSL_CTRL_OPTIONS,(op),NULL)
\r
617 #define SSL_clear_options(ssl,op) \
\r
618 SSL_ctrl((ssl),SSL_CTRL_CLEAR_OPTIONS,(op),NULL)
\r
619 #define SSL_get_options(ssl) \
\r
620 SSL_ctrl((ssl),SSL_CTRL_OPTIONS,0,NULL)
\r
622 #define SSL_CTX_set_mode(ctx,op) \
\r
623 SSL_CTX_ctrl((ctx),SSL_CTRL_MODE,(op),NULL)
\r
624 #define SSL_CTX_clear_mode(ctx,op) \
\r
625 SSL_CTX_ctrl((ctx),SSL_CTRL_CLEAR_MODE,(op),NULL)
\r
626 #define SSL_CTX_get_mode(ctx) \
\r
627 SSL_CTX_ctrl((ctx),SSL_CTRL_MODE,0,NULL)
\r
628 #define SSL_clear_mode(ssl,op) \
\r
629 SSL_ctrl((ssl),SSL_CTRL_CLEAR_MODE,(op),NULL)
\r
630 #define SSL_set_mode(ssl,op) \
\r
631 SSL_ctrl((ssl),SSL_CTRL_MODE,(op),NULL)
\r
632 #define SSL_get_mode(ssl) \
\r
633 SSL_ctrl((ssl),SSL_CTRL_MODE,0,NULL)
\r
634 #define SSL_set_mtu(ssl, mtu) \
\r
635 SSL_ctrl((ssl),SSL_CTRL_SET_MTU,(mtu),NULL)
\r
637 #define SSL_get_secure_renegotiation_support(ssl) \
\r
638 SSL_ctrl((ssl), SSL_CTRL_GET_RI_SUPPORT, 0, NULL)
\r
640 void SSL_CTX_set_msg_callback(SSL_CTX *ctx, void (*cb)(int write_p, int version, int content_type, const void *buf, size_t len, SSL *ssl, void *arg));
\r
641 void SSL_set_msg_callback(SSL *ssl, void (*cb)(int write_p, int version, int content_type, const void *buf, size_t len, SSL *ssl, void *arg));
\r
642 #define SSL_CTX_set_msg_callback_arg(ctx, arg) SSL_CTX_ctrl((ctx), SSL_CTRL_SET_MSG_CALLBACK_ARG, 0, (arg))
\r
643 #define SSL_set_msg_callback_arg(ssl, arg) SSL_ctrl((ssl), SSL_CTRL_SET_MSG_CALLBACK_ARG, 0, (arg))
\r
647 #if defined(OPENSSL_SYS_MSDOS) && !defined(OPENSSL_SYS_WIN32)
\r
648 #define SSL_MAX_CERT_LIST_DEFAULT 1024*30 /* 30k max cert list :-) */
\r
650 #define SSL_MAX_CERT_LIST_DEFAULT 1024*100 /* 100k max cert list :-) */
\r
653 #define SSL_SESSION_CACHE_MAX_SIZE_DEFAULT (1024*20)
\r
655 /* This callback type is used inside SSL_CTX, SSL, and in the functions that set
\r
656 * them. It is used to override the generation of SSL/TLS session IDs in a
\r
657 * server. Return value should be zero on an error, non-zero to proceed. Also,
\r
658 * callbacks should themselves check if the id they generate is unique otherwise
\r
659 * the SSL handshake will fail with an error - callbacks can do this using the
\r
660 * 'ssl' value they're passed by;
\r
661 * SSL_has_matching_session_id(ssl, id, *id_len)
\r
662 * The length value passed in is set at the maximum size the session ID can be.
\r
663 * In SSLv2 this is 16 bytes, whereas SSLv3/TLSv1 it is 32 bytes. The callback
\r
664 * can alter this length to be less if desired, but under SSLv2 session IDs are
\r
665 * supposed to be fixed at 16 bytes so the id will be padded after the callback
\r
666 * returns in this case. It is also an error for the callback to set the size to
\r
668 typedef int (*GEN_SESSION_CB)(const SSL *ssl, unsigned char *id,
\r
669 unsigned int *id_len);
\r
671 typedef struct ssl_comp_st
\r
675 #ifndef OPENSSL_NO_COMP
\r
676 COMP_METHOD *method;
\r
682 DECLARE_STACK_OF(SSL_COMP)
\r
683 DECLARE_LHASH_OF(SSL_SESSION);
\r
687 const SSL_METHOD *method;
\r
689 STACK_OF(SSL_CIPHER) *cipher_list;
\r
690 /* same as above but sorted for lookup */
\r
691 STACK_OF(SSL_CIPHER) *cipher_list_by_id;
\r
693 struct x509_store_st /* X509_STORE */ *cert_store;
\r
694 LHASH_OF(SSL_SESSION) *sessions;
\r
695 /* Most session-ids that will be cached, default is
\r
696 * SSL_SESSION_CACHE_MAX_SIZE_DEFAULT. 0 is unlimited. */
\r
697 unsigned long session_cache_size;
\r
698 struct ssl_session_st *session_cache_head;
\r
699 struct ssl_session_st *session_cache_tail;
\r
701 /* This can have one of 2 values, ored together,
\r
702 * SSL_SESS_CACHE_CLIENT,
\r
703 * SSL_SESS_CACHE_SERVER,
\r
704 * Default is SSL_SESSION_CACHE_SERVER, which means only
\r
705 * SSL_accept which cache SSL_SESSIONS. */
\r
706 int session_cache_mode;
\r
708 /* If timeout is not 0, it is the default timeout value set
\r
709 * when SSL_new() is called. This has been put in to make
\r
710 * life easier to set things up */
\r
711 long session_timeout;
\r
713 /* If this callback is not null, it will be called each
\r
714 * time a session id is added to the cache. If this function
\r
715 * returns 1, it means that the callback will do a
\r
716 * SSL_SESSION_free() when it has finished using it. Otherwise,
\r
717 * on 0, it means the callback has finished with it.
\r
718 * If remove_session_cb is not null, it will be called when
\r
719 * a session-id is removed from the cache. After the call,
\r
720 * OpenSSL will SSL_SESSION_free() it. */
\r
721 int (*new_session_cb)(struct ssl_st *ssl,SSL_SESSION *sess);
\r
722 void (*remove_session_cb)(struct ssl_ctx_st *ctx,SSL_SESSION *sess);
\r
723 SSL_SESSION *(*get_session_cb)(struct ssl_st *ssl,
\r
724 unsigned char *data,int len,int *copy);
\r
728 int sess_connect; /* SSL new conn - started */
\r
729 int sess_connect_renegotiate;/* SSL reneg - requested */
\r
730 int sess_connect_good; /* SSL new conne/reneg - finished */
\r
731 int sess_accept; /* SSL new accept - started */
\r
732 int sess_accept_renegotiate;/* SSL reneg - requested */
\r
733 int sess_accept_good; /* SSL accept/reneg - finished */
\r
734 int sess_miss; /* session lookup misses */
\r
735 int sess_timeout; /* reuse attempt on timeouted session */
\r
736 int sess_cache_full; /* session removed due to full cache */
\r
737 int sess_hit; /* session reuse actually done */
\r
738 int sess_cb_hit; /* session-id that was not
\r
740 * passed back via the callback. This
\r
741 * indicates that the application is
\r
742 * supplying session-id's from other
\r
743 * processes - spooky :-) */
\r
748 /* if defined, these override the X509_verify_cert() calls */
\r
749 int (*app_verify_callback)(X509_STORE_CTX *, void *);
\r
750 void *app_verify_arg;
\r
751 /* before OpenSSL 0.9.7, 'app_verify_arg' was ignored
\r
752 * ('app_verify_callback' was called with just one argument) */
\r
754 /* Default password callback. */
\r
755 pem_password_cb *default_passwd_callback;
\r
757 /* Default password callback user data. */
\r
758 void *default_passwd_callback_userdata;
\r
760 /* get client cert callback */
\r
761 int (*client_cert_cb)(SSL *ssl, X509 **x509, EVP_PKEY **pkey);
\r
763 /* cookie generate callback */
\r
764 int (*app_gen_cookie_cb)(SSL *ssl, unsigned char *cookie,
\r
765 unsigned int *cookie_len);
\r
767 /* verify cookie callback */
\r
768 int (*app_verify_cookie_cb)(SSL *ssl, unsigned char *cookie,
\r
769 unsigned int cookie_len);
\r
771 CRYPTO_EX_DATA ex_data;
\r
773 const EVP_MD *rsa_md5;/* For SSLv2 - name is 'ssl2-md5' */
\r
774 const EVP_MD *md5; /* For SSLv3/TLSv1 'ssl3-md5' */
\r
775 const EVP_MD *sha1; /* For SSLv3/TLSv1 'ssl3->sha1' */
\r
777 STACK_OF(X509) *extra_certs;
\r
778 STACK_OF(SSL_COMP) *comp_methods; /* stack of SSL_COMP, SSLv3/TLSv1 */
\r
781 /* Default values used when no per-SSL value is defined follow */
\r
783 void (*info_callback)(const SSL *ssl,int type,int val); /* used if SSL's info_callback is NULL */
\r
785 /* what we put in client cert requests */
\r
786 STACK_OF(X509_NAME) *client_CA;
\r
789 /* Default values to use in SSL structures follow (these are copied by SSL_new) */
\r
791 unsigned long options;
\r
792 unsigned long mode;
\r
793 long max_cert_list;
\r
795 struct cert_st /* CERT */ *cert;
\r
798 /* callback that allows applications to peek at protocol messages */
\r
799 void (*msg_callback)(int write_p, int version, int content_type, const void *buf, size_t len, SSL *ssl, void *arg);
\r
800 void *msg_callback_arg;
\r
803 unsigned int sid_ctx_length;
\r
804 unsigned char sid_ctx[SSL_MAX_SID_CTX_LENGTH];
\r
805 int (*default_verify_callback)(int ok,X509_STORE_CTX *ctx); /* called 'verify_callback' in the SSL */
\r
807 /* Default generate session ID callback. */
\r
808 GEN_SESSION_CB generate_session_id;
\r
810 X509_VERIFY_PARAM *param;
\r
813 int purpose; /* Purpose setting */
\r
814 int trust; /* Trust setting */
\r
817 int quiet_shutdown;
\r
819 /* Maximum amount of data to send in one fragment.
\r
820 * actual record size can be more than this due to
\r
821 * padding and MAC overheads.
\r
823 unsigned int max_send_fragment;
\r
825 #ifndef OPENSSL_ENGINE
\r
826 /* Engine to pass requests for client certs to
\r
828 ENGINE *client_cert_engine;
\r
831 #ifndef OPENSSL_NO_TLSEXT
\r
832 /* TLS extensions servername callback */
\r
833 int (*tlsext_servername_callback)(SSL*, int *, void *);
\r
834 void *tlsext_servername_arg;
\r
835 /* RFC 4507 session ticket keys */
\r
836 unsigned char tlsext_tick_key_name[16];
\r
837 unsigned char tlsext_tick_hmac_key[16];
\r
838 unsigned char tlsext_tick_aes_key[16];
\r
839 /* Callback to support customisation of ticket key setting */
\r
840 int (*tlsext_ticket_key_cb)(SSL *ssl,
\r
841 unsigned char *name, unsigned char *iv,
\r
842 EVP_CIPHER_CTX *ectx,
\r
843 HMAC_CTX *hctx, int enc);
\r
845 /* certificate status request info */
\r
846 /* Callback for status request */
\r
847 int (*tlsext_status_cb)(SSL *ssl, void *arg);
\r
848 void *tlsext_status_arg;
\r
850 /* draft-rescorla-tls-opaque-prf-input-00.txt information */
\r
851 int (*tlsext_opaque_prf_input_callback)(SSL *, void *peerinput, size_t len, void *arg);
\r
852 void *tlsext_opaque_prf_input_callback_arg;
\r
855 #ifndef OPENSSL_NO_PSK
\r
856 char *psk_identity_hint;
\r
857 unsigned int (*psk_client_callback)(SSL *ssl, const char *hint, char *identity,
\r
858 unsigned int max_identity_len, unsigned char *psk,
\r
859 unsigned int max_psk_len);
\r
860 unsigned int (*psk_server_callback)(SSL *ssl, const char *identity,
\r
861 unsigned char *psk, unsigned int max_psk_len);
\r
864 #ifndef OPENSSL_NO_BUF_FREELISTS
\r
865 #define SSL_MAX_BUF_FREELIST_LEN_DEFAULT 32
\r
866 unsigned int freelist_max_len;
\r
867 struct ssl3_buf_freelist_st *wbuf_freelist;
\r
868 struct ssl3_buf_freelist_st *rbuf_freelist;
\r
872 #define SSL_SESS_CACHE_OFF 0x0000
\r
873 #define SSL_SESS_CACHE_CLIENT 0x0001
\r
874 #define SSL_SESS_CACHE_SERVER 0x0002
\r
875 #define SSL_SESS_CACHE_BOTH (SSL_SESS_CACHE_CLIENT|SSL_SESS_CACHE_SERVER)
\r
876 #define SSL_SESS_CACHE_NO_AUTO_CLEAR 0x0080
\r
877 /* enough comments already ... see SSL_CTX_set_session_cache_mode(3) */
\r
878 #define SSL_SESS_CACHE_NO_INTERNAL_LOOKUP 0x0100
\r
879 #define SSL_SESS_CACHE_NO_INTERNAL_STORE 0x0200
\r
880 #define SSL_SESS_CACHE_NO_INTERNAL \
\r
881 (SSL_SESS_CACHE_NO_INTERNAL_LOOKUP|SSL_SESS_CACHE_NO_INTERNAL_STORE)
\r
883 LHASH_OF(SSL_SESSION) *SSL_CTX_sessions(SSL_CTX *ctx);
\r
884 #define SSL_CTX_sess_number(ctx) \
\r
885 SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_NUMBER,0,NULL)
\r
886 #define SSL_CTX_sess_connect(ctx) \
\r
887 SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_CONNECT,0,NULL)
\r
888 #define SSL_CTX_sess_connect_good(ctx) \
\r
889 SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_CONNECT_GOOD,0,NULL)
\r
890 #define SSL_CTX_sess_connect_renegotiate(ctx) \
\r
891 SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_CONNECT_RENEGOTIATE,0,NULL)
\r
892 #define SSL_CTX_sess_accept(ctx) \
\r
893 SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_ACCEPT,0,NULL)
\r
894 #define SSL_CTX_sess_accept_renegotiate(ctx) \
\r
895 SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_ACCEPT_RENEGOTIATE,0,NULL)
\r
896 #define SSL_CTX_sess_accept_good(ctx) \
\r
897 SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_ACCEPT_GOOD,0,NULL)
\r
898 #define SSL_CTX_sess_hits(ctx) \
\r
899 SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_HIT,0,NULL)
\r
900 #define SSL_CTX_sess_cb_hits(ctx) \
\r
901 SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_CB_HIT,0,NULL)
\r
902 #define SSL_CTX_sess_misses(ctx) \
\r
903 SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_MISSES,0,NULL)
\r
904 #define SSL_CTX_sess_timeouts(ctx) \
\r
905 SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_TIMEOUTS,0,NULL)
\r
906 #define SSL_CTX_sess_cache_full(ctx) \
\r
907 SSL_CTX_ctrl(ctx,SSL_CTRL_SESS_CACHE_FULL,0,NULL)
\r
909 void SSL_CTX_sess_set_new_cb(SSL_CTX *ctx, int (*new_session_cb)(struct ssl_st *ssl,SSL_SESSION *sess));
\r
910 int (*SSL_CTX_sess_get_new_cb(SSL_CTX *ctx))(struct ssl_st *ssl, SSL_SESSION *sess);
\r
911 void SSL_CTX_sess_set_remove_cb(SSL_CTX *ctx, void (*remove_session_cb)(struct ssl_ctx_st *ctx,SSL_SESSION *sess));
\r
912 void (*SSL_CTX_sess_get_remove_cb(SSL_CTX *ctx))(struct ssl_ctx_st *ctx, SSL_SESSION *sess);
\r
913 void SSL_CTX_sess_set_get_cb(SSL_CTX *ctx, SSL_SESSION *(*get_session_cb)(struct ssl_st *ssl, unsigned char *data,int len,int *copy));
\r
914 SSL_SESSION *(*SSL_CTX_sess_get_get_cb(SSL_CTX *ctx))(struct ssl_st *ssl, unsigned char *Data, int len, int *copy);
\r
915 void SSL_CTX_set_info_callback(SSL_CTX *ctx, void (*cb)(const SSL *ssl,int type,int val));
\r
916 void (*SSL_CTX_get_info_callback(SSL_CTX *ctx))(const SSL *ssl,int type,int val);
\r
917 void SSL_CTX_set_client_cert_cb(SSL_CTX *ctx, int (*client_cert_cb)(SSL *ssl, X509 **x509, EVP_PKEY **pkey));
\r
918 int (*SSL_CTX_get_client_cert_cb(SSL_CTX *ctx))(SSL *ssl, X509 **x509, EVP_PKEY **pkey);
\r
919 #ifndef OPENSSL_NO_ENGINE
\r
920 int SSL_CTX_set_client_cert_engine(SSL_CTX *ctx, ENGINE *e);
\r
922 void SSL_CTX_set_cookie_generate_cb(SSL_CTX *ctx, int (*app_gen_cookie_cb)(SSL *ssl, unsigned char *cookie, unsigned int *cookie_len));
\r
923 void SSL_CTX_set_cookie_verify_cb(SSL_CTX *ctx, int (*app_verify_cookie_cb)(SSL *ssl, unsigned char *cookie, unsigned int cookie_len));
\r
925 #ifndef OPENSSL_NO_PSK
\r
926 /* the maximum length of the buffer given to callbacks containing the
\r
927 * resulting identity/psk */
\r
928 #define PSK_MAX_IDENTITY_LEN 128
\r
929 #define PSK_MAX_PSK_LEN 256
\r
930 void SSL_CTX_set_psk_client_callback(SSL_CTX *ctx,
\r
931 unsigned int (*psk_client_callback)(SSL *ssl, const char *hint,
\r
932 char *identity, unsigned int max_identity_len, unsigned char *psk,
\r
933 unsigned int max_psk_len));
\r
934 void SSL_set_psk_client_callback(SSL *ssl,
\r
935 unsigned int (*psk_client_callback)(SSL *ssl, const char *hint,
\r
936 char *identity, unsigned int max_identity_len, unsigned char *psk,
\r
937 unsigned int max_psk_len));
\r
938 void SSL_CTX_set_psk_server_callback(SSL_CTX *ctx,
\r
939 unsigned int (*psk_server_callback)(SSL *ssl, const char *identity,
\r
940 unsigned char *psk, unsigned int max_psk_len));
\r
941 void SSL_set_psk_server_callback(SSL *ssl,
\r
942 unsigned int (*psk_server_callback)(SSL *ssl, const char *identity,
\r
943 unsigned char *psk, unsigned int max_psk_len));
\r
944 int SSL_CTX_use_psk_identity_hint(SSL_CTX *ctx, const char *identity_hint);
\r
945 int SSL_use_psk_identity_hint(SSL *s, const char *identity_hint);
\r
946 const char *SSL_get_psk_identity_hint(const SSL *s);
\r
947 const char *SSL_get_psk_identity(const SSL *s);
\r
950 #define SSL_NOTHING 1
\r
951 #define SSL_WRITING 2
\r
952 #define SSL_READING 3
\r
953 #define SSL_X509_LOOKUP 4
\r
955 /* These will only be used when doing non-blocking IO */
\r
956 #define SSL_want_nothing(s) (SSL_want(s) == SSL_NOTHING)
\r
957 #define SSL_want_read(s) (SSL_want(s) == SSL_READING)
\r
958 #define SSL_want_write(s) (SSL_want(s) == SSL_WRITING)
\r
959 #define SSL_want_x509_lookup(s) (SSL_want(s) == SSL_X509_LOOKUP)
\r
961 #define SSL_MAC_FLAG_READ_MAC_STREAM 1
\r
962 #define SSL_MAC_FLAG_WRITE_MAC_STREAM 2
\r
966 /* protocol version
\r
967 * (one of SSL2_VERSION, SSL3_VERSION, TLS1_VERSION, DTLS1_VERSION)
\r
970 int type; /* SSL_ST_CONNECT or SSL_ST_ACCEPT */
\r
972 const SSL_METHOD *method; /* SSLv3 */
\r
974 /* There are 2 BIO's even though they are normally both the
\r
975 * same. This is so data can be read and written to different
\r
978 #ifndef OPENSSL_NO_BIO
\r
979 BIO *rbio; /* used by SSL_read */
\r
980 BIO *wbio; /* used by SSL_write */
\r
981 BIO *bbio; /* used during session-id reuse to concatenate
\r
984 char *rbio; /* used by SSL_read */
\r
985 char *wbio; /* used by SSL_write */
\r
988 /* This holds a variable that indicates what we were doing
\r
989 * when a 0 or -1 is returned. This is needed for
\r
990 * non-blocking IO so we know what request needs re-doing when
\r
991 * in SSL_accept or SSL_connect */
\r
994 /* true when we are actually in SSL_accept() or SSL_connect() */
\r
996 int (*handshake_func)(SSL *);
\r
998 /* Imagine that here's a boolean member "init" that is
\r
999 * switched as soon as SSL_set_{accept/connect}_state
\r
1000 * is called for the first time, so that "state" and
\r
1001 * "handshake_func" are properly initialized. But as
\r
1002 * handshake_func is == 0 until then, we use this
\r
1003 * test instead of an "init" member.
\r
1006 int server; /* are we the server side? - mostly used by SSL_clear*/
\r
1008 int new_session;/* 1 if we are to use a new session.
\r
1009 * 2 if we are a server and are inside a handshake
\r
1010 * (i.e. not just sending a HelloRequest)
\r
1011 * NB: For servers, the 'new' session may actually be a previously
\r
1012 * cached session or even the previous session unless
\r
1013 * SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION is set */
\r
1014 int quiet_shutdown;/* don't send shutdown packets */
\r
1015 int shutdown; /* we have shut things down, 0x01 sent, 0x02
\r
1017 int state; /* where we are */
\r
1018 int rstate; /* where we are when reading */
\r
1020 BUF_MEM *init_buf; /* buffer used during init */
\r
1021 void *init_msg; /* pointer to handshake message body, set by ssl3_get_message() */
\r
1022 int init_num; /* amount read/written */
\r
1023 int init_off; /* amount read/written */
\r
1025 /* used internally to point at a raw packet */
\r
1026 unsigned char *packet;
\r
1027 unsigned int packet_length;
\r
1029 struct ssl2_state_st *s2; /* SSLv2 variables */
\r
1030 struct ssl3_state_st *s3; /* SSLv3 variables */
\r
1031 struct dtls1_state_st *d1; /* DTLSv1 variables */
\r
1033 int read_ahead; /* Read as many input bytes as possible
\r
1034 * (for non-blocking reads) */
\r
1036 /* callback that allows applications to peek at protocol messages */
\r
1037 void (*msg_callback)(int write_p, int version, int content_type, const void *buf, size_t len, SSL *ssl, void *arg);
\r
1038 void *msg_callback_arg;
\r
1040 int hit; /* reusing a previous session */
\r
1042 X509_VERIFY_PARAM *param;
\r
1045 int purpose; /* Purpose setting */
\r
1046 int trust; /* Trust setting */
\r
1050 STACK_OF(SSL_CIPHER) *cipher_list;
\r
1051 STACK_OF(SSL_CIPHER) *cipher_list_by_id;
\r
1053 /* These are the ones being used, the ones in SSL_SESSION are
\r
1054 * the ones to be 'copied' into these ones */
\r
1056 EVP_CIPHER_CTX *enc_read_ctx; /* cryptographic state */
\r
1057 EVP_MD_CTX *read_hash; /* used for mac generation */
\r
1058 #ifndef OPENSSL_NO_COMP
\r
1059 COMP_CTX *expand; /* uncompress */
\r
1064 EVP_CIPHER_CTX *enc_write_ctx; /* cryptographic state */
\r
1065 EVP_MD_CTX *write_hash; /* used for mac generation */
\r
1066 #ifndef OPENSSL_NO_COMP
\r
1067 COMP_CTX *compress; /* compression */
\r
1072 /* session info */
\r
1074 /* client cert? */
\r
1075 /* This is used to hold the server certificate used */
\r
1076 struct cert_st /* CERT */ *cert;
\r
1078 /* the session_id_context is used to ensure sessions are only reused
\r
1079 * in the appropriate context */
\r
1080 unsigned int sid_ctx_length;
\r
1081 unsigned char sid_ctx[SSL_MAX_SID_CTX_LENGTH];
\r
1083 /* This can also be in the session once a session is established */
\r
1084 SSL_SESSION *session;
\r
1086 /* Default generate session ID callback. */
\r
1087 GEN_SESSION_CB generate_session_id;
\r
1089 /* Used in SSL2 and SSL3 */
\r
1090 int verify_mode; /* 0 don't care about verify failure.
\r
1091 * 1 fail if verify fails */
\r
1092 int (*verify_callback)(int ok,X509_STORE_CTX *ctx); /* fail if callback returns 0 */
\r
1094 void (*info_callback)(const SSL *ssl,int type,int val); /* optional informational callback */
\r
1096 int error; /* error bytes to be written */
\r
1097 int error_code; /* actual code */
\r
1099 #ifndef OPENSSL_NO_KRB5
\r
1100 KSSL_CTX *kssl_ctx; /* Kerberos 5 context */
\r
1101 #endif /* OPENSSL_NO_KRB5 */
\r
1103 #ifndef OPENSSL_NO_PSK
\r
1104 unsigned int (*psk_client_callback)(SSL *ssl, const char *hint, char *identity,
\r
1105 unsigned int max_identity_len, unsigned char *psk,
\r
1106 unsigned int max_psk_len);
\r
1107 unsigned int (*psk_server_callback)(SSL *ssl, const char *identity,
\r
1108 unsigned char *psk, unsigned int max_psk_len);
\r
1112 /* set this flag to 1 and a sleep(1) is put into all SSL_read()
\r
1113 * and SSL_write() calls, good for nbio debuging :-) */
\r
1116 /* extra application data */
\r
1117 long verify_result;
\r
1118 CRYPTO_EX_DATA ex_data;
\r
1120 /* for server side, keep the list of CA_dn we can use */
\r
1121 STACK_OF(X509_NAME) *client_CA;
\r
1124 unsigned long options; /* protocol behaviour */
\r
1125 unsigned long mode; /* API behaviour */
\r
1126 long max_cert_list;
\r
1128 int client_version; /* what was passed, used for
\r
1129 * SSLv3/TLS rollback check */
\r
1130 unsigned int max_send_fragment;
\r
1131 #ifndef OPENSSL_NO_TLSEXT
\r
1132 /* TLS extension debug callback */
\r
1133 void (*tlsext_debug_cb)(SSL *s, int client_server, int type,
\r
1134 unsigned char *data, int len,
\r
1136 void *tlsext_debug_arg;
\r
1137 char *tlsext_hostname;
\r
1138 int servername_done; /* no further mod of servername
\r
1139 0 : call the servername extension callback.
\r
1140 1 : prepare 2, allow last ack just after in server callback.
\r
1141 2 : don't call servername callback, no ack in server hello
\r
1143 /* certificate status request info */
\r
1144 /* Status type or -1 if no status type */
\r
1145 int tlsext_status_type;
\r
1146 /* Expect OCSP CertificateStatus message */
\r
1147 int tlsext_status_expected;
\r
1148 /* OCSP status request only */
\r
1149 STACK_OF(OCSP_RESPID) *tlsext_ocsp_ids;
\r
1150 X509_EXTENSIONS *tlsext_ocsp_exts;
\r
1151 /* OCSP response received or to be sent */
\r
1152 unsigned char *tlsext_ocsp_resp;
\r
1153 int tlsext_ocsp_resplen;
\r
1155 /* RFC4507 session ticket expected to be received or sent */
\r
1156 int tlsext_ticket_expected;
\r
1157 #ifndef OPENSSL_NO_EC
\r
1158 size_t tlsext_ecpointformatlist_length;
\r
1159 unsigned char *tlsext_ecpointformatlist; /* our list */
\r
1160 size_t tlsext_ellipticcurvelist_length;
\r
1161 unsigned char *tlsext_ellipticcurvelist; /* our list */
\r
1162 #endif /* OPENSSL_NO_EC */
\r
1164 /* draft-rescorla-tls-opaque-prf-input-00.txt information to be used for handshakes */
\r
1165 void *tlsext_opaque_prf_input;
\r
1166 size_t tlsext_opaque_prf_input_len;
\r
1168 /* TLS Session Ticket extension override */
\r
1169 TLS_SESSION_TICKET_EXT *tlsext_session_ticket;
\r
1171 /* TLS Session Ticket extension callback */
\r
1172 tls_session_ticket_ext_cb_fn tls_session_ticket_ext_cb;
\r
1173 void *tls_session_ticket_ext_cb_arg;
\r
1175 /* TLS pre-shared secret session resumption */
\r
1176 tls_session_secret_cb_fn tls_session_secret_cb;
\r
1177 void *tls_session_secret_cb_arg;
\r
1179 SSL_CTX * initial_ctx; /* initial ctx, used to store sessions */
\r
1180 #define session_ctx initial_ctx
\r
1182 #define session_ctx ctx
\r
1183 #endif /* OPENSSL_NO_TLSEXT */
\r
1186 #ifdef __cplusplus
\r
1190 #include <openssl/ssl2.h>
\r
1191 #include <openssl/ssl3.h>
\r
1192 #include <openssl/tls1.h> /* This is mostly sslv3 with a few tweaks */
\r
1193 #include <openssl/dtls1.h> /* Datagram TLS */
\r
1194 #include <openssl/ssl23.h>
\r
1196 #ifdef __cplusplus
\r
1200 /* compatibility */
\r
1201 #define SSL_set_app_data(s,arg) (SSL_set_ex_data(s,0,(char *)arg))
\r
1202 #define SSL_get_app_data(s) (SSL_get_ex_data(s,0))
\r
1203 #define SSL_SESSION_set_app_data(s,a) (SSL_SESSION_set_ex_data(s,0,(char *)a))
\r
1204 #define SSL_SESSION_get_app_data(s) (SSL_SESSION_get_ex_data(s,0))
\r
1205 #define SSL_CTX_get_app_data(ctx) (SSL_CTX_get_ex_data(ctx,0))
\r
1206 #define SSL_CTX_set_app_data(ctx,arg) (SSL_CTX_set_ex_data(ctx,0,(char *)arg))
\r
1208 /* The following are the possible values for ssl->state are are
\r
1209 * used to indicate where we are up to in the SSL connection establishment.
\r
1210 * The macros that follow are about the only things you should need to use
\r
1211 * and even then, only when using non-blocking IO.
\r
1212 * It can also be useful to work out where you were when the connection
\r
1215 #define SSL_ST_CONNECT 0x1000
\r
1216 #define SSL_ST_ACCEPT 0x2000
\r
1217 #define SSL_ST_MASK 0x0FFF
\r
1218 #define SSL_ST_INIT (SSL_ST_CONNECT|SSL_ST_ACCEPT)
\r
1219 #define SSL_ST_BEFORE 0x4000
\r
1220 #define SSL_ST_OK 0x03
\r
1221 #define SSL_ST_RENEGOTIATE (0x04|SSL_ST_INIT)
\r
1223 #define SSL_CB_LOOP 0x01
\r
1224 #define SSL_CB_EXIT 0x02
\r
1225 #define SSL_CB_READ 0x04
\r
1226 #define SSL_CB_WRITE 0x08
\r
1227 #define SSL_CB_ALERT 0x4000 /* used in callback */
\r
1228 #define SSL_CB_READ_ALERT (SSL_CB_ALERT|SSL_CB_READ)
\r
1229 #define SSL_CB_WRITE_ALERT (SSL_CB_ALERT|SSL_CB_WRITE)
\r
1230 #define SSL_CB_ACCEPT_LOOP (SSL_ST_ACCEPT|SSL_CB_LOOP)
\r
1231 #define SSL_CB_ACCEPT_EXIT (SSL_ST_ACCEPT|SSL_CB_EXIT)
\r
1232 #define SSL_CB_CONNECT_LOOP (SSL_ST_CONNECT|SSL_CB_LOOP)
\r
1233 #define SSL_CB_CONNECT_EXIT (SSL_ST_CONNECT|SSL_CB_EXIT)
\r
1234 #define SSL_CB_HANDSHAKE_START 0x10
\r
1235 #define SSL_CB_HANDSHAKE_DONE 0x20
\r
1237 /* Is the SSL_connection established? */
\r
1238 #define SSL_get_state(a) SSL_state(a)
\r
1239 #define SSL_is_init_finished(a) (SSL_state(a) == SSL_ST_OK)
\r
1240 #define SSL_in_init(a) (SSL_state(a)&SSL_ST_INIT)
\r
1241 #define SSL_in_before(a) (SSL_state(a)&SSL_ST_BEFORE)
\r
1242 #define SSL_in_connect_init(a) (SSL_state(a)&SSL_ST_CONNECT)
\r
1243 #define SSL_in_accept_init(a) (SSL_state(a)&SSL_ST_ACCEPT)
\r
1245 /* The following 2 states are kept in ssl->rstate when reads fail,
\r
1246 * you should not need these */
\r
1247 #define SSL_ST_READ_HEADER 0xF0
\r
1248 #define SSL_ST_READ_BODY 0xF1
\r
1249 #define SSL_ST_READ_DONE 0xF2
\r
1251 /* Obtain latest Finished message
\r
1252 * -- that we sent (SSL_get_finished)
\r
1253 * -- that we expected from peer (SSL_get_peer_finished).
\r
1254 * Returns length (0 == no Finished so far), copies up to 'count' bytes. */
\r
1255 size_t SSL_get_finished(const SSL *s, void *buf, size_t count);
\r
1256 size_t SSL_get_peer_finished(const SSL *s, void *buf, size_t count);
\r
1258 /* use either SSL_VERIFY_NONE or SSL_VERIFY_PEER, the last 2 options
\r
1259 * are 'ored' with SSL_VERIFY_PEER if they are desired */
\r
1260 #define SSL_VERIFY_NONE 0x00
\r
1261 #define SSL_VERIFY_PEER 0x01
\r
1262 #define SSL_VERIFY_FAIL_IF_NO_PEER_CERT 0x02
\r
1263 #define SSL_VERIFY_CLIENT_ONCE 0x04
\r
1265 #define OpenSSL_add_ssl_algorithms() SSL_library_init()
\r
1266 #define SSLeay_add_ssl_algorithms() SSL_library_init()
\r
1268 /* this is for backward compatibility */
\r
1269 #if 0 /* NEW_SSLEAY */
\r
1270 #define SSL_CTX_set_default_verify(a,b,c) SSL_CTX_set_verify(a,b,c)
\r
1271 #define SSL_set_pref_cipher(c,n) SSL_set_cipher_list(c,n)
\r
1272 #define SSL_add_session(a,b) SSL_CTX_add_session((a),(b))
\r
1273 #define SSL_remove_session(a,b) SSL_CTX_remove_session((a),(b))
\r
1274 #define SSL_flush_sessions(a,b) SSL_CTX_flush_sessions((a),(b))
\r
1276 /* More backward compatibility */
\r
1277 #define SSL_get_cipher(s) \
\r
1278 SSL_CIPHER_get_name(SSL_get_current_cipher(s))
\r
1279 #define SSL_get_cipher_bits(s,np) \
\r
1280 SSL_CIPHER_get_bits(SSL_get_current_cipher(s),np)
\r
1281 #define SSL_get_cipher_version(s) \
\r
1282 SSL_CIPHER_get_version(SSL_get_current_cipher(s))
\r
1283 #define SSL_get_cipher_name(s) \
\r
1284 SSL_CIPHER_get_name(SSL_get_current_cipher(s))
\r
1285 #define SSL_get_time(a) SSL_SESSION_get_time(a)
\r
1286 #define SSL_set_time(a,b) SSL_SESSION_set_time((a),(b))
\r
1287 #define SSL_get_timeout(a) SSL_SESSION_get_timeout(a)
\r
1288 #define SSL_set_timeout(a,b) SSL_SESSION_set_timeout((a),(b))
\r
1290 #define d2i_SSL_SESSION_bio(bp,s_id) ASN1_d2i_bio_of(SSL_SESSION,SSL_SESSION_new,d2i_SSL_SESSION,bp,s_id)
\r
1291 #define i2d_SSL_SESSION_bio(bp,s_id) ASN1_i2d_bio_of(SSL_SESSION,i2d_SSL_SESSION,bp,s_id)
\r
1293 DECLARE_PEM_rw(SSL_SESSION, SSL_SESSION)
\r
1295 #define SSL_AD_REASON_OFFSET 1000 /* offset to get SSL_R_... value from SSL_AD_... */
\r
1297 /* These alert types are for SSLv3 and TLSv1 */
\r
1298 #define SSL_AD_CLOSE_NOTIFY SSL3_AD_CLOSE_NOTIFY
\r
1299 #define SSL_AD_UNEXPECTED_MESSAGE SSL3_AD_UNEXPECTED_MESSAGE /* fatal */
\r
1300 #define SSL_AD_BAD_RECORD_MAC SSL3_AD_BAD_RECORD_MAC /* fatal */
\r
1301 #define SSL_AD_DECRYPTION_FAILED TLS1_AD_DECRYPTION_FAILED
\r
1302 #define SSL_AD_RECORD_OVERFLOW TLS1_AD_RECORD_OVERFLOW
\r
1303 #define SSL_AD_DECOMPRESSION_FAILURE SSL3_AD_DECOMPRESSION_FAILURE/* fatal */
\r
1304 #define SSL_AD_HANDSHAKE_FAILURE SSL3_AD_HANDSHAKE_FAILURE/* fatal */
\r
1305 #define SSL_AD_NO_CERTIFICATE SSL3_AD_NO_CERTIFICATE /* Not for TLS */
\r
1306 #define SSL_AD_BAD_CERTIFICATE SSL3_AD_BAD_CERTIFICATE
\r
1307 #define SSL_AD_UNSUPPORTED_CERTIFICATE SSL3_AD_UNSUPPORTED_CERTIFICATE
\r
1308 #define SSL_AD_CERTIFICATE_REVOKED SSL3_AD_CERTIFICATE_REVOKED
\r
1309 #define SSL_AD_CERTIFICATE_EXPIRED SSL3_AD_CERTIFICATE_EXPIRED
\r
1310 #define SSL_AD_CERTIFICATE_UNKNOWN SSL3_AD_CERTIFICATE_UNKNOWN
\r
1311 #define SSL_AD_ILLEGAL_PARAMETER SSL3_AD_ILLEGAL_PARAMETER /* fatal */
\r
1312 #define SSL_AD_UNKNOWN_CA TLS1_AD_UNKNOWN_CA /* fatal */
\r
1313 #define SSL_AD_ACCESS_DENIED TLS1_AD_ACCESS_DENIED /* fatal */
\r
1314 #define SSL_AD_DECODE_ERROR TLS1_AD_DECODE_ERROR /* fatal */
\r
1315 #define SSL_AD_DECRYPT_ERROR TLS1_AD_DECRYPT_ERROR
\r
1316 #define SSL_AD_EXPORT_RESTRICTION TLS1_AD_EXPORT_RESTRICTION/* fatal */
\r
1317 #define SSL_AD_PROTOCOL_VERSION TLS1_AD_PROTOCOL_VERSION /* fatal */
\r
1318 #define SSL_AD_INSUFFICIENT_SECURITY TLS1_AD_INSUFFICIENT_SECURITY/* fatal */
\r
1319 #define SSL_AD_INTERNAL_ERROR TLS1_AD_INTERNAL_ERROR /* fatal */
\r
1320 #define SSL_AD_USER_CANCELLED TLS1_AD_USER_CANCELLED
\r
1321 #define SSL_AD_NO_RENEGOTIATION TLS1_AD_NO_RENEGOTIATION
\r
1322 #define SSL_AD_UNSUPPORTED_EXTENSION TLS1_AD_UNSUPPORTED_EXTENSION
\r
1323 #define SSL_AD_CERTIFICATE_UNOBTAINABLE TLS1_AD_CERTIFICATE_UNOBTAINABLE
\r
1324 #define SSL_AD_UNRECOGNIZED_NAME TLS1_AD_UNRECOGNIZED_NAME
\r
1325 #define SSL_AD_BAD_CERTIFICATE_STATUS_RESPONSE TLS1_AD_BAD_CERTIFICATE_STATUS_RESPONSE
\r
1326 #define SSL_AD_BAD_CERTIFICATE_HASH_VALUE TLS1_AD_BAD_CERTIFICATE_HASH_VALUE
\r
1327 #define SSL_AD_UNKNOWN_PSK_IDENTITY TLS1_AD_UNKNOWN_PSK_IDENTITY /* fatal */
\r
1329 #define SSL_ERROR_NONE 0
\r
1330 #define SSL_ERROR_SSL 1
\r
1331 #define SSL_ERROR_WANT_READ 2
\r
1332 #define SSL_ERROR_WANT_WRITE 3
\r
1333 #define SSL_ERROR_WANT_X509_LOOKUP 4
\r
1334 #define SSL_ERROR_SYSCALL 5 /* look at error stack/return value/errno */
\r
1335 #define SSL_ERROR_ZERO_RETURN 6
\r
1336 #define SSL_ERROR_WANT_CONNECT 7
\r
1337 #define SSL_ERROR_WANT_ACCEPT 8
\r
1339 #define SSL_CTRL_NEED_TMP_RSA 1
\r
1340 #define SSL_CTRL_SET_TMP_RSA 2
\r
1341 #define SSL_CTRL_SET_TMP_DH 3
\r
1342 #define SSL_CTRL_SET_TMP_ECDH 4
\r
1343 #define SSL_CTRL_SET_TMP_RSA_CB 5
\r
1344 #define SSL_CTRL_SET_TMP_DH_CB 6
\r
1345 #define SSL_CTRL_SET_TMP_ECDH_CB 7
\r
1347 #define SSL_CTRL_GET_SESSION_REUSED 8
\r
1348 #define SSL_CTRL_GET_CLIENT_CERT_REQUEST 9
\r
1349 #define SSL_CTRL_GET_NUM_RENEGOTIATIONS 10
\r
1350 #define SSL_CTRL_CLEAR_NUM_RENEGOTIATIONS 11
\r
1351 #define SSL_CTRL_GET_TOTAL_RENEGOTIATIONS 12
\r
1352 #define SSL_CTRL_GET_FLAGS 13
\r
1353 #define SSL_CTRL_EXTRA_CHAIN_CERT 14
\r
1355 #define SSL_CTRL_SET_MSG_CALLBACK 15
\r
1356 #define SSL_CTRL_SET_MSG_CALLBACK_ARG 16
\r
1358 /* only applies to datagram connections */
\r
1359 #define SSL_CTRL_SET_MTU 17
\r
1361 #define SSL_CTRL_SESS_NUMBER 20
\r
1362 #define SSL_CTRL_SESS_CONNECT 21
\r
1363 #define SSL_CTRL_SESS_CONNECT_GOOD 22
\r
1364 #define SSL_CTRL_SESS_CONNECT_RENEGOTIATE 23
\r
1365 #define SSL_CTRL_SESS_ACCEPT 24
\r
1366 #define SSL_CTRL_SESS_ACCEPT_GOOD 25
\r
1367 #define SSL_CTRL_SESS_ACCEPT_RENEGOTIATE 26
\r
1368 #define SSL_CTRL_SESS_HIT 27
\r
1369 #define SSL_CTRL_SESS_CB_HIT 28
\r
1370 #define SSL_CTRL_SESS_MISSES 29
\r
1371 #define SSL_CTRL_SESS_TIMEOUTS 30
\r
1372 #define SSL_CTRL_SESS_CACHE_FULL 31
\r
1373 #define SSL_CTRL_OPTIONS 32
\r
1374 #define SSL_CTRL_MODE 33
\r
1376 #define SSL_CTRL_GET_READ_AHEAD 40
\r
1377 #define SSL_CTRL_SET_READ_AHEAD 41
\r
1378 #define SSL_CTRL_SET_SESS_CACHE_SIZE 42
\r
1379 #define SSL_CTRL_GET_SESS_CACHE_SIZE 43
\r
1380 #define SSL_CTRL_SET_SESS_CACHE_MODE 44
\r
1381 #define SSL_CTRL_GET_SESS_CACHE_MODE 45
\r
1383 #define SSL_CTRL_GET_MAX_CERT_LIST 50
\r
1384 #define SSL_CTRL_SET_MAX_CERT_LIST 51
\r
1386 #define SSL_CTRL_SET_MAX_SEND_FRAGMENT 52
\r
1388 /* see tls1.h for macros based on these */
\r
1389 #ifndef OPENSSL_NO_TLSEXT
\r
1390 #define SSL_CTRL_SET_TLSEXT_SERVERNAME_CB 53
\r
1391 #define SSL_CTRL_SET_TLSEXT_SERVERNAME_ARG 54
\r
1392 #define SSL_CTRL_SET_TLSEXT_HOSTNAME 55
\r
1393 #define SSL_CTRL_SET_TLSEXT_DEBUG_CB 56
\r
1394 #define SSL_CTRL_SET_TLSEXT_DEBUG_ARG 57
\r
1395 #define SSL_CTRL_GET_TLSEXT_TICKET_KEYS 58
\r
1396 #define SSL_CTRL_SET_TLSEXT_TICKET_KEYS 59
\r
1397 #define SSL_CTRL_SET_TLSEXT_OPAQUE_PRF_INPUT 60
\r
1398 #define SSL_CTRL_SET_TLSEXT_OPAQUE_PRF_INPUT_CB 61
\r
1399 #define SSL_CTRL_SET_TLSEXT_OPAQUE_PRF_INPUT_CB_ARG 62
\r
1400 #define SSL_CTRL_SET_TLSEXT_STATUS_REQ_CB 63
\r
1401 #define SSL_CTRL_SET_TLSEXT_STATUS_REQ_CB_ARG 64
\r
1402 #define SSL_CTRL_SET_TLSEXT_STATUS_REQ_TYPE 65
\r
1403 #define SSL_CTRL_GET_TLSEXT_STATUS_REQ_EXTS 66
\r
1404 #define SSL_CTRL_SET_TLSEXT_STATUS_REQ_EXTS 67
\r
1405 #define SSL_CTRL_GET_TLSEXT_STATUS_REQ_IDS 68
\r
1406 #define SSL_CTRL_SET_TLSEXT_STATUS_REQ_IDS 69
\r
1407 #define SSL_CTRL_GET_TLSEXT_STATUS_REQ_OCSP_RESP 70
\r
1408 #define SSL_CTRL_SET_TLSEXT_STATUS_REQ_OCSP_RESP 71
\r
1410 #define SSL_CTRL_SET_TLSEXT_TICKET_KEY_CB 72
\r
1413 #define DTLS_CTRL_GET_TIMEOUT 73
\r
1414 #define DTLS_CTRL_HANDLE_TIMEOUT 74
\r
1415 #define DTLS_CTRL_LISTEN 75
\r
1417 #define SSL_CTRL_GET_RI_SUPPORT 76
\r
1418 #define SSL_CTRL_CLEAR_OPTIONS 77
\r
1419 #define SSL_CTRL_CLEAR_MODE 78
\r
1421 #define DTLSv1_get_timeout(ssl, arg) \
\r
1422 SSL_ctrl(ssl,DTLS_CTRL_GET_TIMEOUT,0, (void *)arg)
\r
1423 #define DTLSv1_handle_timeout(ssl) \
\r
1424 SSL_ctrl(ssl,DTLS_CTRL_HANDLE_TIMEOUT,0, NULL)
\r
1425 #define DTLSv1_listen(ssl, peer) \
\r
1426 SSL_ctrl(ssl,DTLS_CTRL_LISTEN,0, (void *)peer)
\r
1428 #define SSL_session_reused(ssl) \
\r
1429 SSL_ctrl((ssl),SSL_CTRL_GET_SESSION_REUSED,0,NULL)
\r
1430 #define SSL_num_renegotiations(ssl) \
\r
1431 SSL_ctrl((ssl),SSL_CTRL_GET_NUM_RENEGOTIATIONS,0,NULL)
\r
1432 #define SSL_clear_num_renegotiations(ssl) \
\r
1433 SSL_ctrl((ssl),SSL_CTRL_CLEAR_NUM_RENEGOTIATIONS,0,NULL)
\r
1434 #define SSL_total_renegotiations(ssl) \
\r
1435 SSL_ctrl((ssl),SSL_CTRL_GET_TOTAL_RENEGOTIATIONS,0,NULL)
\r
1437 #define SSL_CTX_need_tmp_RSA(ctx) \
\r
1438 SSL_CTX_ctrl(ctx,SSL_CTRL_NEED_TMP_RSA,0,NULL)
\r
1439 #define SSL_CTX_set_tmp_rsa(ctx,rsa) \
\r
1440 SSL_CTX_ctrl(ctx,SSL_CTRL_SET_TMP_RSA,0,(char *)rsa)
\r
1441 #define SSL_CTX_set_tmp_dh(ctx,dh) \
\r
1442 SSL_CTX_ctrl(ctx,SSL_CTRL_SET_TMP_DH,0,(char *)dh)
\r
1443 #define SSL_CTX_set_tmp_ecdh(ctx,ecdh) \
\r
1444 SSL_CTX_ctrl(ctx,SSL_CTRL_SET_TMP_ECDH,0,(char *)ecdh)
\r
1446 #define SSL_need_tmp_RSA(ssl) \
\r
1447 SSL_ctrl(ssl,SSL_CTRL_NEED_TMP_RSA,0,NULL)
\r
1448 #define SSL_set_tmp_rsa(ssl,rsa) \
\r
1449 SSL_ctrl(ssl,SSL_CTRL_SET_TMP_RSA,0,(char *)rsa)
\r
1450 #define SSL_set_tmp_dh(ssl,dh) \
\r
1451 SSL_ctrl(ssl,SSL_CTRL_SET_TMP_DH,0,(char *)dh)
\r
1452 #define SSL_set_tmp_ecdh(ssl,ecdh) \
\r
1453 SSL_ctrl(ssl,SSL_CTRL_SET_TMP_ECDH,0,(char *)ecdh)
\r
1455 #define SSL_CTX_add_extra_chain_cert(ctx,x509) \
\r
1456 SSL_CTX_ctrl(ctx,SSL_CTRL_EXTRA_CHAIN_CERT,0,(char *)x509)
\r
1458 #ifndef OPENSSL_NO_BIO
\r
1459 BIO_METHOD *BIO_f_ssl(void);
\r
1460 BIO *BIO_new_ssl(SSL_CTX *ctx,int client);
\r
1461 BIO *BIO_new_ssl_connect(SSL_CTX *ctx);
\r
1462 BIO *BIO_new_buffer_ssl_connect(SSL_CTX *ctx);
\r
1463 int BIO_ssl_copy_session_id(BIO *to,BIO *from);
\r
1464 void BIO_ssl_shutdown(BIO *ssl_bio);
\r
1468 int SSL_CTX_set_cipher_list(SSL_CTX *,const char *str);
\r
1469 SSL_CTX *SSL_CTX_new(const SSL_METHOD *meth);
\r
1470 void SSL_CTX_free(SSL_CTX *);
\r
1471 long SSL_CTX_set_timeout(SSL_CTX *ctx,long t);
\r
1472 long SSL_CTX_get_timeout(const SSL_CTX *ctx);
\r
1473 X509_STORE *SSL_CTX_get_cert_store(const SSL_CTX *);
\r
1474 void SSL_CTX_set_cert_store(SSL_CTX *,X509_STORE *);
\r
1475 int SSL_want(const SSL *s);
\r
1476 int SSL_clear(SSL *s);
\r
1478 void SSL_CTX_flush_sessions(SSL_CTX *ctx,long tm);
\r
1480 const SSL_CIPHER *SSL_get_current_cipher(const SSL *s);
\r
1481 int SSL_CIPHER_get_bits(const SSL_CIPHER *c,int *alg_bits);
\r
1482 char * SSL_CIPHER_get_version(const SSL_CIPHER *c);
\r
1483 const char * SSL_CIPHER_get_name(const SSL_CIPHER *c);
\r
1485 int SSL_get_fd(const SSL *s);
\r
1486 int SSL_get_rfd(const SSL *s);
\r
1487 int SSL_get_wfd(const SSL *s);
\r
1488 const char * SSL_get_cipher_list(const SSL *s,int n);
\r
1489 char * SSL_get_shared_ciphers(const SSL *s, char *buf, int len);
\r
1490 int SSL_get_read_ahead(const SSL * s);
\r
1491 int SSL_pending(const SSL *s);
\r
1492 #ifndef OPENSSL_NO_SOCK
\r
1493 int SSL_set_fd(SSL *s, int fd);
\r
1494 int SSL_set_rfd(SSL *s, int fd);
\r
1495 int SSL_set_wfd(SSL *s, int fd);
\r
1497 #ifndef OPENSSL_NO_BIO
\r
1498 void SSL_set_bio(SSL *s, BIO *rbio,BIO *wbio);
\r
1499 BIO * SSL_get_rbio(const SSL *s);
\r
1500 BIO * SSL_get_wbio(const SSL *s);
\r
1502 int SSL_set_cipher_list(SSL *s, const char *str);
\r
1503 void SSL_set_read_ahead(SSL *s, int yes);
\r
1504 int SSL_get_verify_mode(const SSL *s);
\r
1505 int SSL_get_verify_depth(const SSL *s);
\r
1506 int (*SSL_get_verify_callback(const SSL *s))(int,X509_STORE_CTX *);
\r
1507 void SSL_set_verify(SSL *s, int mode,
\r
1508 int (*callback)(int ok,X509_STORE_CTX *ctx));
\r
1509 void SSL_set_verify_depth(SSL *s, int depth);
\r
1510 #ifndef OPENSSL_NO_RSA
\r
1511 int SSL_use_RSAPrivateKey(SSL *ssl, RSA *rsa);
\r
1513 int SSL_use_RSAPrivateKey_ASN1(SSL *ssl, unsigned char *d, long len);
\r
1514 int SSL_use_PrivateKey(SSL *ssl, EVP_PKEY *pkey);
\r
1515 int SSL_use_PrivateKey_ASN1(int pk,SSL *ssl, const unsigned char *d, long len);
\r
1516 int SSL_use_certificate(SSL *ssl, X509 *x);
\r
1517 int SSL_use_certificate_ASN1(SSL *ssl, const unsigned char *d, int len);
\r
1519 #ifndef OPENSSL_NO_STDIO
\r
1520 int SSL_use_RSAPrivateKey_file(SSL *ssl, const char *file, int type);
\r
1521 int SSL_use_PrivateKey_file(SSL *ssl, const char *file, int type);
\r
1522 int SSL_use_certificate_file(SSL *ssl, const char *file, int type);
\r
1523 int SSL_CTX_use_RSAPrivateKey_file(SSL_CTX *ctx, const char *file, int type);
\r
1524 int SSL_CTX_use_PrivateKey_file(SSL_CTX *ctx, const char *file, int type);
\r
1525 int SSL_CTX_use_certificate_file(SSL_CTX *ctx, const char *file, int type);
\r
1526 int SSL_CTX_use_certificate_chain_file(SSL_CTX *ctx, const char *file); /* PEM type */
\r
1527 STACK_OF(X509_NAME) *SSL_load_client_CA_file(const char *file);
\r
1528 int SSL_add_file_cert_subjects_to_stack(STACK_OF(X509_NAME) *stackCAs,
\r
1529 const char *file);
\r
1530 #ifndef OPENSSL_SYS_VMS
\r
1531 #ifndef OPENSSL_SYS_MACINTOSH_CLASSIC /* XXXXX: Better scheme needed! [was: #ifndef MAC_OS_pre_X] */
\r
1532 int SSL_add_dir_cert_subjects_to_stack(STACK_OF(X509_NAME) *stackCAs,
\r
1539 void SSL_load_error_strings(void );
\r
1540 const char *SSL_state_string(const SSL *s);
\r
1541 const char *SSL_rstate_string(const SSL *s);
\r
1542 const char *SSL_state_string_long(const SSL *s);
\r
1543 const char *SSL_rstate_string_long(const SSL *s);
\r
1544 long SSL_SESSION_get_time(const SSL_SESSION *s);
\r
1545 long SSL_SESSION_set_time(SSL_SESSION *s, long t);
\r
1546 long SSL_SESSION_get_timeout(const SSL_SESSION *s);
\r
1547 long SSL_SESSION_set_timeout(SSL_SESSION *s, long t);
\r
1548 void SSL_copy_session_id(SSL *to,const SSL *from);
\r
1550 SSL_SESSION *SSL_SESSION_new(void);
\r
1551 const unsigned char *SSL_SESSION_get_id(const SSL_SESSION *s,
\r
1552 unsigned int *len);
\r
1553 #ifndef OPENSSL_NO_FP_API
\r
1554 int SSL_SESSION_print_fp(FILE *fp,const SSL_SESSION *ses);
\r
1556 #ifndef OPENSSL_NO_BIO
\r
1557 int SSL_SESSION_print(BIO *fp,const SSL_SESSION *ses);
\r
1559 void SSL_SESSION_free(SSL_SESSION *ses);
\r
1560 int i2d_SSL_SESSION(SSL_SESSION *in,unsigned char **pp);
\r
1561 int SSL_set_session(SSL *to, SSL_SESSION *session);
\r
1562 int SSL_CTX_add_session(SSL_CTX *s, SSL_SESSION *c);
\r
1563 int SSL_CTX_remove_session(SSL_CTX *,SSL_SESSION *c);
\r
1564 int SSL_CTX_set_generate_session_id(SSL_CTX *, GEN_SESSION_CB);
\r
1565 int SSL_set_generate_session_id(SSL *, GEN_SESSION_CB);
\r
1566 int SSL_has_matching_session_id(const SSL *ssl, const unsigned char *id,
\r
1567 unsigned int id_len);
\r
1568 SSL_SESSION *d2i_SSL_SESSION(SSL_SESSION **a,const unsigned char **pp,
\r
1571 #ifdef HEADER_X509_H
\r
1572 X509 * SSL_get_peer_certificate(const SSL *s);
\r
1575 STACK_OF(X509) *SSL_get_peer_cert_chain(const SSL *s);
\r
1577 int SSL_CTX_get_verify_mode(const SSL_CTX *ctx);
\r
1578 int SSL_CTX_get_verify_depth(const SSL_CTX *ctx);
\r
1579 int (*SSL_CTX_get_verify_callback(const SSL_CTX *ctx))(int,X509_STORE_CTX *);
\r
1580 void SSL_CTX_set_verify(SSL_CTX *ctx,int mode,
\r
1581 int (*callback)(int, X509_STORE_CTX *));
\r
1582 void SSL_CTX_set_verify_depth(SSL_CTX *ctx,int depth);
\r
1583 void SSL_CTX_set_cert_verify_callback(SSL_CTX *ctx, int (*cb)(X509_STORE_CTX *,void *), void *arg);
\r
1584 #ifndef OPENSSL_NO_RSA
\r
1585 int SSL_CTX_use_RSAPrivateKey(SSL_CTX *ctx, RSA *rsa);
\r
1587 int SSL_CTX_use_RSAPrivateKey_ASN1(SSL_CTX *ctx, const unsigned char *d, long len);
\r
1588 int SSL_CTX_use_PrivateKey(SSL_CTX *ctx, EVP_PKEY *pkey);
\r
1589 int SSL_CTX_use_PrivateKey_ASN1(int pk,SSL_CTX *ctx,
\r
1590 const unsigned char *d, long len);
\r
1591 int SSL_CTX_use_certificate(SSL_CTX *ctx, X509 *x);
\r
1592 int SSL_CTX_use_certificate_ASN1(SSL_CTX *ctx, int len, const unsigned char *d);
\r
1594 void SSL_CTX_set_default_passwd_cb(SSL_CTX *ctx, pem_password_cb *cb);
\r
1595 void SSL_CTX_set_default_passwd_cb_userdata(SSL_CTX *ctx, void *u);
\r
1597 int SSL_CTX_check_private_key(const SSL_CTX *ctx);
\r
1598 int SSL_check_private_key(const SSL *ctx);
\r
1600 int SSL_CTX_set_session_id_context(SSL_CTX *ctx,const unsigned char *sid_ctx,
\r
1601 unsigned int sid_ctx_len);
\r
1603 SSL * SSL_new(SSL_CTX *ctx);
\r
1604 int SSL_set_session_id_context(SSL *ssl,const unsigned char *sid_ctx,
\r
1605 unsigned int sid_ctx_len);
\r
1607 int SSL_CTX_set_purpose(SSL_CTX *s, int purpose);
\r
1608 int SSL_set_purpose(SSL *s, int purpose);
\r
1609 int SSL_CTX_set_trust(SSL_CTX *s, int trust);
\r
1610 int SSL_set_trust(SSL *s, int trust);
\r
1612 int SSL_CTX_set1_param(SSL_CTX *ctx, X509_VERIFY_PARAM *vpm);
\r
1613 int SSL_set1_param(SSL *ssl, X509_VERIFY_PARAM *vpm);
\r
1615 void SSL_free(SSL *ssl);
\r
1616 int SSL_accept(SSL *ssl);
\r
1617 int SSL_connect(SSL *ssl);
\r
1618 int SSL_read(SSL *ssl,void *buf,int num);
\r
1619 int SSL_peek(SSL *ssl,void *buf,int num);
\r
1620 int SSL_write(SSL *ssl,const void *buf,int num);
\r
1621 long SSL_ctrl(SSL *ssl,int cmd, long larg, void *parg);
\r
1622 long SSL_callback_ctrl(SSL *, int, void (*)(void));
\r
1623 long SSL_CTX_ctrl(SSL_CTX *ctx,int cmd, long larg, void *parg);
\r
1624 long SSL_CTX_callback_ctrl(SSL_CTX *, int, void (*)(void));
\r
1626 int SSL_get_error(const SSL *s,int ret_code);
\r
1627 const char *SSL_get_version(const SSL *s);
\r
1629 /* This sets the 'default' SSL version that SSL_new() will create */
\r
1630 int SSL_CTX_set_ssl_version(SSL_CTX *ctx, const SSL_METHOD *meth);
\r
1632 #ifndef OPENSSL_NO_SSL2
\r
1633 const SSL_METHOD *SSLv2_method(void); /* SSLv2 */
\r
1634 const SSL_METHOD *SSLv2_server_method(void); /* SSLv2 */
\r
1635 const SSL_METHOD *SSLv2_client_method(void); /* SSLv2 */
\r
1638 const SSL_METHOD *SSLv3_method(void); /* SSLv3 */
\r
1639 const SSL_METHOD *SSLv3_server_method(void); /* SSLv3 */
\r
1640 const SSL_METHOD *SSLv3_client_method(void); /* SSLv3 */
\r
1642 const SSL_METHOD *SSLv23_method(void); /* SSLv3 but can rollback to v2 */
\r
1643 const SSL_METHOD *SSLv23_server_method(void); /* SSLv3 but can rollback to v2 */
\r
1644 const SSL_METHOD *SSLv23_client_method(void); /* SSLv3 but can rollback to v2 */
\r
1646 const SSL_METHOD *TLSv1_method(void); /* TLSv1.0 */
\r
1647 const SSL_METHOD *TLSv1_server_method(void); /* TLSv1.0 */
\r
1648 const SSL_METHOD *TLSv1_client_method(void); /* TLSv1.0 */
\r
1650 const SSL_METHOD *DTLSv1_method(void); /* DTLSv1.0 */
\r
1651 const SSL_METHOD *DTLSv1_server_method(void); /* DTLSv1.0 */
\r
1652 const SSL_METHOD *DTLSv1_client_method(void); /* DTLSv1.0 */
\r
1654 STACK_OF(SSL_CIPHER) *SSL_get_ciphers(const SSL *s);
\r
1656 int SSL_do_handshake(SSL *s);
\r
1657 int SSL_renegotiate(SSL *s);
\r
1658 int SSL_renegotiate_pending(SSL *s);
\r
1659 int SSL_shutdown(SSL *s);
\r
1661 const SSL_METHOD *SSL_get_ssl_method(SSL *s);
\r
1662 int SSL_set_ssl_method(SSL *s, const SSL_METHOD *method);
\r
1663 const char *SSL_alert_type_string_long(int value);
\r
1664 const char *SSL_alert_type_string(int value);
\r
1665 const char *SSL_alert_desc_string_long(int value);
\r
1666 const char *SSL_alert_desc_string(int value);
\r
1668 void SSL_set_client_CA_list(SSL *s, STACK_OF(X509_NAME) *name_list);
\r
1669 void SSL_CTX_set_client_CA_list(SSL_CTX *ctx, STACK_OF(X509_NAME) *name_list);
\r
1670 STACK_OF(X509_NAME) *SSL_get_client_CA_list(const SSL *s);
\r
1671 STACK_OF(X509_NAME) *SSL_CTX_get_client_CA_list(const SSL_CTX *s);
\r
1672 int SSL_add_client_CA(SSL *ssl,X509 *x);
\r
1673 int SSL_CTX_add_client_CA(SSL_CTX *ctx,X509 *x);
\r
1675 void SSL_set_connect_state(SSL *s);
\r
1676 void SSL_set_accept_state(SSL *s);
\r
1678 long SSL_get_default_timeout(const SSL *s);
\r
1680 int SSL_library_init(void );
\r
1682 char *SSL_CIPHER_description(const SSL_CIPHER *,char *buf,int size);
\r
1683 STACK_OF(X509_NAME) *SSL_dup_CA_list(STACK_OF(X509_NAME) *sk);
\r
1685 SSL *SSL_dup(SSL *ssl);
\r
1687 X509 *SSL_get_certificate(const SSL *ssl);
\r
1688 /* EVP_PKEY */ struct evp_pkey_st *SSL_get_privatekey(SSL *ssl);
\r
1690 void SSL_CTX_set_quiet_shutdown(SSL_CTX *ctx,int mode);
\r
1691 int SSL_CTX_get_quiet_shutdown(const SSL_CTX *ctx);
\r
1692 void SSL_set_quiet_shutdown(SSL *ssl,int mode);
\r
1693 int SSL_get_quiet_shutdown(const SSL *ssl);
\r
1694 void SSL_set_shutdown(SSL *ssl,int mode);
\r
1695 int SSL_get_shutdown(const SSL *ssl);
\r
1696 int SSL_version(const SSL *ssl);
\r
1697 int SSL_CTX_set_default_verify_paths(SSL_CTX *ctx);
\r
1698 int SSL_CTX_load_verify_locations(SSL_CTX *ctx, const char *CAfile,
\r
1699 const char *CApath);
\r
1700 #define SSL_get0_session SSL_get_session /* just peek at pointer */
\r
1701 SSL_SESSION *SSL_get_session(const SSL *ssl);
\r
1702 SSL_SESSION *SSL_get1_session(SSL *ssl); /* obtain a reference count */
\r
1703 SSL_CTX *SSL_get_SSL_CTX(const SSL *ssl);
\r
1704 SSL_CTX *SSL_set_SSL_CTX(SSL *ssl, SSL_CTX* ctx);
\r
1705 void SSL_set_info_callback(SSL *ssl,
\r
1706 void (*cb)(const SSL *ssl,int type,int val));
\r
1707 void (*SSL_get_info_callback(const SSL *ssl))(const SSL *ssl,int type,int val);
\r
1708 int SSL_state(const SSL *ssl);
\r
1710 void SSL_set_verify_result(SSL *ssl,long v);
\r
1711 long SSL_get_verify_result(const SSL *ssl);
\r
1713 int SSL_set_ex_data(SSL *ssl,int idx,void *data);
\r
1714 void *SSL_get_ex_data(const SSL *ssl,int idx);
\r
1715 int SSL_get_ex_new_index(long argl, void *argp, CRYPTO_EX_new *new_func,
\r
1716 CRYPTO_EX_dup *dup_func, CRYPTO_EX_free *free_func);
\r
1718 int SSL_SESSION_set_ex_data(SSL_SESSION *ss,int idx,void *data);
\r
1719 void *SSL_SESSION_get_ex_data(const SSL_SESSION *ss,int idx);
\r
1720 int SSL_SESSION_get_ex_new_index(long argl, void *argp, CRYPTO_EX_new *new_func,
\r
1721 CRYPTO_EX_dup *dup_func, CRYPTO_EX_free *free_func);
\r
1723 int SSL_CTX_set_ex_data(SSL_CTX *ssl,int idx,void *data);
\r
1724 void *SSL_CTX_get_ex_data(const SSL_CTX *ssl,int idx);
\r
1725 int SSL_CTX_get_ex_new_index(long argl, void *argp, CRYPTO_EX_new *new_func,
\r
1726 CRYPTO_EX_dup *dup_func, CRYPTO_EX_free *free_func);
\r
1728 int SSL_get_ex_data_X509_STORE_CTX_idx(void );
\r
1730 #define SSL_CTX_sess_set_cache_size(ctx,t) \
\r
1731 SSL_CTX_ctrl(ctx,SSL_CTRL_SET_SESS_CACHE_SIZE,t,NULL)
\r
1732 #define SSL_CTX_sess_get_cache_size(ctx) \
\r
1733 SSL_CTX_ctrl(ctx,SSL_CTRL_GET_SESS_CACHE_SIZE,0,NULL)
\r
1734 #define SSL_CTX_set_session_cache_mode(ctx,m) \
\r
1735 SSL_CTX_ctrl(ctx,SSL_CTRL_SET_SESS_CACHE_MODE,m,NULL)
\r
1736 #define SSL_CTX_get_session_cache_mode(ctx) \
\r
1737 SSL_CTX_ctrl(ctx,SSL_CTRL_GET_SESS_CACHE_MODE,0,NULL)
\r
1739 #define SSL_CTX_get_default_read_ahead(ctx) SSL_CTX_get_read_ahead(ctx)
\r
1740 #define SSL_CTX_set_default_read_ahead(ctx,m) SSL_CTX_set_read_ahead(ctx,m)
\r
1741 #define SSL_CTX_get_read_ahead(ctx) \
\r
1742 SSL_CTX_ctrl(ctx,SSL_CTRL_GET_READ_AHEAD,0,NULL)
\r
1743 #define SSL_CTX_set_read_ahead(ctx,m) \
\r
1744 SSL_CTX_ctrl(ctx,SSL_CTRL_SET_READ_AHEAD,m,NULL)
\r
1745 #define SSL_CTX_get_max_cert_list(ctx) \
\r
1746 SSL_CTX_ctrl(ctx,SSL_CTRL_GET_MAX_CERT_LIST,0,NULL)
\r
1747 #define SSL_CTX_set_max_cert_list(ctx,m) \
\r
1748 SSL_CTX_ctrl(ctx,SSL_CTRL_SET_MAX_CERT_LIST,m,NULL)
\r
1749 #define SSL_get_max_cert_list(ssl) \
\r
1750 SSL_ctrl(ssl,SSL_CTRL_GET_MAX_CERT_LIST,0,NULL)
\r
1751 #define SSL_set_max_cert_list(ssl,m) \
\r
1752 SSL_ctrl(ssl,SSL_CTRL_SET_MAX_CERT_LIST,m,NULL)
\r
1754 #define SSL_CTX_set_max_send_fragment(ctx,m) \
\r
1755 SSL_CTX_ctrl(ctx,SSL_CTRL_SET_MAX_SEND_FRAGMENT,m,NULL)
\r
1756 #define SSL_set_max_send_fragment(ssl,m) \
\r
1757 SSL_ctrl(ssl,SSL_CTRL_SET_MAX_SEND_FRAGMENT,m,NULL)
\r
1759 /* NB: the keylength is only applicable when is_export is true */
\r
1760 #ifndef OPENSSL_NO_RSA
\r
1761 void SSL_CTX_set_tmp_rsa_callback(SSL_CTX *ctx,
\r
1762 RSA *(*cb)(SSL *ssl,int is_export,
\r
1765 void SSL_set_tmp_rsa_callback(SSL *ssl,
\r
1766 RSA *(*cb)(SSL *ssl,int is_export,
\r
1769 #ifndef OPENSSL_NO_DH
\r
1770 void SSL_CTX_set_tmp_dh_callback(SSL_CTX *ctx,
\r
1771 DH *(*dh)(SSL *ssl,int is_export,
\r
1773 void SSL_set_tmp_dh_callback(SSL *ssl,
\r
1774 DH *(*dh)(SSL *ssl,int is_export,
\r
1777 #ifndef OPENSSL_NO_ECDH
\r
1778 void SSL_CTX_set_tmp_ecdh_callback(SSL_CTX *ctx,
\r
1779 EC_KEY *(*ecdh)(SSL *ssl,int is_export,
\r
1781 void SSL_set_tmp_ecdh_callback(SSL *ssl,
\r
1782 EC_KEY *(*ecdh)(SSL *ssl,int is_export,
\r
1786 #ifndef OPENSSL_NO_COMP
\r
1787 const COMP_METHOD *SSL_get_current_compression(SSL *s);
\r
1788 const COMP_METHOD *SSL_get_current_expansion(SSL *s);
\r
1789 const char *SSL_COMP_get_name(const COMP_METHOD *comp);
\r
1790 STACK_OF(SSL_COMP) *SSL_COMP_get_compression_methods(void);
\r
1791 int SSL_COMP_add_compression_method(int id,COMP_METHOD *cm);
\r
1793 const void *SSL_get_current_compression(SSL *s);
\r
1794 const void *SSL_get_current_expansion(SSL *s);
\r
1795 const char *SSL_COMP_get_name(const void *comp);
\r
1796 void *SSL_COMP_get_compression_methods(void);
\r
1797 int SSL_COMP_add_compression_method(int id,void *cm);
\r
1800 /* TLS extensions functions */
\r
1801 int SSL_set_session_ticket_ext(SSL *s, void *ext_data, int ext_len);
\r
1803 int SSL_set_session_ticket_ext_cb(SSL *s, tls_session_ticket_ext_cb_fn cb,
\r
1806 /* Pre-shared secret session resumption functions */
\r
1807 int SSL_set_session_secret_cb(SSL *s, tls_session_secret_cb_fn tls_session_secret_cb, void *arg);
\r
1809 /* BEGIN ERROR CODES */
\r
1810 /* The following lines are auto generated by the script mkerr.pl. Any changes
\r
1811 * made after this point may be overwritten when the script is next run.
\r
1813 void ERR_load_SSL_strings(void);
\r
1815 /* Error codes for the SSL functions. */
\r
1817 /* Function codes. */
\r
1818 #define SSL_F_CLIENT_CERTIFICATE 100
\r
1819 #define SSL_F_CLIENT_FINISHED 167
\r
1820 #define SSL_F_CLIENT_HELLO 101
\r
1821 #define SSL_F_CLIENT_MASTER_KEY 102
\r
1822 #define SSL_F_D2I_SSL_SESSION 103
\r
1823 #define SSL_F_DO_DTLS1_WRITE 245
\r
1824 #define SSL_F_DO_SSL3_WRITE 104
\r
1825 #define SSL_F_DTLS1_ACCEPT 246
\r
1826 #define SSL_F_DTLS1_ADD_CERT_TO_BUF 295
\r
1827 #define SSL_F_DTLS1_BUFFER_RECORD 247
\r
1828 #define SSL_F_DTLS1_CLIENT_HELLO 248
\r
1829 #define SSL_F_DTLS1_CONNECT 249
\r
1830 #define SSL_F_DTLS1_ENC 250
\r
1831 #define SSL_F_DTLS1_GET_HELLO_VERIFY 251
\r
1832 #define SSL_F_DTLS1_GET_MESSAGE 252
\r
1833 #define SSL_F_DTLS1_GET_MESSAGE_FRAGMENT 253
\r
1834 #define SSL_F_DTLS1_GET_RECORD 254
\r
1835 #define SSL_F_DTLS1_HANDLE_TIMEOUT 297
\r
1836 #define SSL_F_DTLS1_OUTPUT_CERT_CHAIN 255
\r
1837 #define SSL_F_DTLS1_PREPROCESS_FRAGMENT 288
\r
1838 #define SSL_F_DTLS1_PROCESS_OUT_OF_SEQ_MESSAGE 256
\r
1839 #define SSL_F_DTLS1_PROCESS_RECORD 257
\r
1840 #define SSL_F_DTLS1_READ_BYTES 258
\r
1841 #define SSL_F_DTLS1_READ_FAILED 259
\r
1842 #define SSL_F_DTLS1_SEND_CERTIFICATE_REQUEST 260
\r
1843 #define SSL_F_DTLS1_SEND_CLIENT_CERTIFICATE 261
\r
1844 #define SSL_F_DTLS1_SEND_CLIENT_KEY_EXCHANGE 262
\r
1845 #define SSL_F_DTLS1_SEND_CLIENT_VERIFY 263
\r
1846 #define SSL_F_DTLS1_SEND_HELLO_VERIFY_REQUEST 264
\r
1847 #define SSL_F_DTLS1_SEND_SERVER_CERTIFICATE 265
\r
1848 #define SSL_F_DTLS1_SEND_SERVER_HELLO 266
\r
1849 #define SSL_F_DTLS1_SEND_SERVER_KEY_EXCHANGE 267
\r
1850 #define SSL_F_DTLS1_WRITE_APP_DATA_BYTES 268
\r
1851 #define SSL_F_GET_CLIENT_FINISHED 105
\r
1852 #define SSL_F_GET_CLIENT_HELLO 106
\r
1853 #define SSL_F_GET_CLIENT_MASTER_KEY 107
\r
1854 #define SSL_F_GET_SERVER_FINISHED 108
\r
1855 #define SSL_F_GET_SERVER_HELLO 109
\r
1856 #define SSL_F_GET_SERVER_VERIFY 110
\r
1857 #define SSL_F_I2D_SSL_SESSION 111
\r
1858 #define SSL_F_READ_N 112
\r
1859 #define SSL_F_REQUEST_CERTIFICATE 113
\r
1860 #define SSL_F_SERVER_FINISH 239
\r
1861 #define SSL_F_SERVER_HELLO 114
\r
1862 #define SSL_F_SERVER_VERIFY 240
\r
1863 #define SSL_F_SSL23_ACCEPT 115
\r
1864 #define SSL_F_SSL23_CLIENT_HELLO 116
\r
1865 #define SSL_F_SSL23_CONNECT 117
\r
1866 #define SSL_F_SSL23_GET_CLIENT_HELLO 118
\r
1867 #define SSL_F_SSL23_GET_SERVER_HELLO 119
\r
1868 #define SSL_F_SSL23_PEEK 237
\r
1869 #define SSL_F_SSL23_READ 120
\r
1870 #define SSL_F_SSL23_WRITE 121
\r
1871 #define SSL_F_SSL2_ACCEPT 122
\r
1872 #define SSL_F_SSL2_CONNECT 123
\r
1873 #define SSL_F_SSL2_ENC_INIT 124
\r
1874 #define SSL_F_SSL2_GENERATE_KEY_MATERIAL 241
\r
1875 #define SSL_F_SSL2_PEEK 234
\r
1876 #define SSL_F_SSL2_READ 125
\r
1877 #define SSL_F_SSL2_READ_INTERNAL 236
\r
1878 #define SSL_F_SSL2_SET_CERTIFICATE 126
\r
1879 #define SSL_F_SSL2_WRITE 127
\r
1880 #define SSL_F_SSL3_ACCEPT 128
\r
1881 #define SSL_F_SSL3_ADD_CERT_TO_BUF 296
\r
1882 #define SSL_F_SSL3_CALLBACK_CTRL 233
\r
1883 #define SSL_F_SSL3_CHANGE_CIPHER_STATE 129
\r
1884 #define SSL_F_SSL3_CHECK_CERT_AND_ALGORITHM 130
\r
1885 #define SSL_F_SSL3_CHECK_CLIENT_HELLO 304
\r
1886 #define SSL_F_SSL3_CLIENT_HELLO 131
\r
1887 #define SSL_F_SSL3_CONNECT 132
\r
1888 #define SSL_F_SSL3_CTRL 213
\r
1889 #define SSL_F_SSL3_CTX_CTRL 133
\r
1890 #define SSL_F_SSL3_DIGEST_CACHED_RECORDS 293
\r
1891 #define SSL_F_SSL3_DO_CHANGE_CIPHER_SPEC 292
\r
1892 #define SSL_F_SSL3_ENC 134
\r
1893 #define SSL_F_SSL3_GENERATE_KEY_BLOCK 238
\r
1894 #define SSL_F_SSL3_GET_CERTIFICATE_REQUEST 135
\r
1895 #define SSL_F_SSL3_GET_CERT_STATUS 289
\r
1896 #define SSL_F_SSL3_GET_CERT_VERIFY 136
\r
1897 #define SSL_F_SSL3_GET_CLIENT_CERTIFICATE 137
\r
1898 #define SSL_F_SSL3_GET_CLIENT_HELLO 138
\r
1899 #define SSL_F_SSL3_GET_CLIENT_KEY_EXCHANGE 139
\r
1900 #define SSL_F_SSL3_GET_FINISHED 140
\r
1901 #define SSL_F_SSL3_GET_KEY_EXCHANGE 141
\r
1902 #define SSL_F_SSL3_GET_MESSAGE 142
\r
1903 #define SSL_F_SSL3_GET_NEW_SESSION_TICKET 283
\r
1904 #define SSL_F_SSL3_GET_RECORD 143
\r
1905 #define SSL_F_SSL3_GET_SERVER_CERTIFICATE 144
\r
1906 #define SSL_F_SSL3_GET_SERVER_DONE 145
\r
1907 #define SSL_F_SSL3_GET_SERVER_HELLO 146
\r
1908 #define SSL_F_SSL3_HANDSHAKE_MAC 285
\r
1909 #define SSL_F_SSL3_NEW_SESSION_TICKET 287
\r
1910 #define SSL_F_SSL3_OUTPUT_CERT_CHAIN 147
\r
1911 #define SSL_F_SSL3_PEEK 235
\r
1912 #define SSL_F_SSL3_READ_BYTES 148
\r
1913 #define SSL_F_SSL3_READ_N 149
\r
1914 #define SSL_F_SSL3_SEND_CERTIFICATE_REQUEST 150
\r
1915 #define SSL_F_SSL3_SEND_CLIENT_CERTIFICATE 151
\r
1916 #define SSL_F_SSL3_SEND_CLIENT_KEY_EXCHANGE 152
\r
1917 #define SSL_F_SSL3_SEND_CLIENT_VERIFY 153
\r
1918 #define SSL_F_SSL3_SEND_SERVER_CERTIFICATE 154
\r
1919 #define SSL_F_SSL3_SEND_SERVER_HELLO 242
\r
1920 #define SSL_F_SSL3_SEND_SERVER_KEY_EXCHANGE 155
\r
1921 #define SSL_F_SSL3_SETUP_KEY_BLOCK 157
\r
1922 #define SSL_F_SSL3_SETUP_READ_BUFFER 156
\r
1923 #define SSL_F_SSL3_SETUP_WRITE_BUFFER 291
\r
1924 #define SSL_F_SSL3_WRITE_BYTES 158
\r
1925 #define SSL_F_SSL3_WRITE_PENDING 159
\r
1926 #define SSL_F_SSL_ADD_CLIENTHELLO_RENEGOTIATE_EXT 298
\r
1927 #define SSL_F_SSL_ADD_CLIENTHELLO_TLSEXT 277
\r
1928 #define SSL_F_SSL_ADD_DIR_CERT_SUBJECTS_TO_STACK 215
\r
1929 #define SSL_F_SSL_ADD_FILE_CERT_SUBJECTS_TO_STACK 216
\r
1930 #define SSL_F_SSL_ADD_SERVERHELLO_RENEGOTIATE_EXT 299
\r
1931 #define SSL_F_SSL_ADD_SERVERHELLO_TLSEXT 278
\r
1932 #define SSL_F_SSL_BAD_METHOD 160
\r
1933 #define SSL_F_SSL_BYTES_TO_CIPHER_LIST 161
\r
1934 #define SSL_F_SSL_CERT_DUP 221
\r
1935 #define SSL_F_SSL_CERT_INST 222
\r
1936 #define SSL_F_SSL_CERT_INSTANTIATE 214
\r
1937 #define SSL_F_SSL_CERT_NEW 162
\r
1938 #define SSL_F_SSL_CHECK_PRIVATE_KEY 163
\r
1939 #define SSL_F_SSL_CHECK_SERVERHELLO_TLSEXT 280
\r
1940 #define SSL_F_SSL_CHECK_SRVR_ECC_CERT_AND_ALG 279
\r
1941 #define SSL_F_SSL_CIPHER_PROCESS_RULESTR 230
\r
1942 #define SSL_F_SSL_CIPHER_STRENGTH_SORT 231
\r
1943 #define SSL_F_SSL_CLEAR 164
\r
1944 #define SSL_F_SSL_COMP_ADD_COMPRESSION_METHOD 165
\r
1945 #define SSL_F_SSL_CREATE_CIPHER_LIST 166
\r
1946 #define SSL_F_SSL_CTRL 232
\r
1947 #define SSL_F_SSL_CTX_CHECK_PRIVATE_KEY 168
\r
1948 #define SSL_F_SSL_CTX_NEW 169
\r
1949 #define SSL_F_SSL_CTX_SET_CIPHER_LIST 269
\r
1950 #define SSL_F_SSL_CTX_SET_CLIENT_CERT_ENGINE 290
\r
1951 #define SSL_F_SSL_CTX_SET_PURPOSE 226
\r
1952 #define SSL_F_SSL_CTX_SET_SESSION_ID_CONTEXT 219
\r
1953 #define SSL_F_SSL_CTX_SET_SSL_VERSION 170
\r
1954 #define SSL_F_SSL_CTX_SET_TRUST 229
\r
1955 #define SSL_F_SSL_CTX_USE_CERTIFICATE 171
\r
1956 #define SSL_F_SSL_CTX_USE_CERTIFICATE_ASN1 172
\r
1957 #define SSL_F_SSL_CTX_USE_CERTIFICATE_CHAIN_FILE 220
\r
1958 #define SSL_F_SSL_CTX_USE_CERTIFICATE_FILE 173
\r
1959 #define SSL_F_SSL_CTX_USE_PRIVATEKEY 174
\r
1960 #define SSL_F_SSL_CTX_USE_PRIVATEKEY_ASN1 175
\r
1961 #define SSL_F_SSL_CTX_USE_PRIVATEKEY_FILE 176
\r
1962 #define SSL_F_SSL_CTX_USE_PSK_IDENTITY_HINT 272
\r
1963 #define SSL_F_SSL_CTX_USE_RSAPRIVATEKEY 177
\r
1964 #define SSL_F_SSL_CTX_USE_RSAPRIVATEKEY_ASN1 178
\r
1965 #define SSL_F_SSL_CTX_USE_RSAPRIVATEKEY_FILE 179
\r
1966 #define SSL_F_SSL_DO_HANDSHAKE 180
\r
1967 #define SSL_F_SSL_GET_NEW_SESSION 181
\r
1968 #define SSL_F_SSL_GET_PREV_SESSION 217
\r
1969 #define SSL_F_SSL_GET_SERVER_SEND_CERT 182
\r
1970 #define SSL_F_SSL_GET_SIGN_PKEY 183
\r
1971 #define SSL_F_SSL_INIT_WBIO_BUFFER 184
\r
1972 #define SSL_F_SSL_LOAD_CLIENT_CA_FILE 185
\r
1973 #define SSL_F_SSL_NEW 186
\r
1974 #define SSL_F_SSL_PARSE_CLIENTHELLO_RENEGOTIATE_EXT 300
\r
1975 #define SSL_F_SSL_PARSE_CLIENTHELLO_TLSEXT 302
\r
1976 #define SSL_F_SSL_PARSE_SERVERHELLO_RENEGOTIATE_EXT 301
\r
1977 #define SSL_F_SSL_PARSE_SERVERHELLO_TLSEXT 303
\r
1978 #define SSL_F_SSL_PEEK 270
\r
1979 #define SSL_F_SSL_PREPARE_CLIENTHELLO_TLSEXT 281
\r
1980 #define SSL_F_SSL_PREPARE_SERVERHELLO_TLSEXT 282
\r
1981 #define SSL_F_SSL_READ 223
\r
1982 #define SSL_F_SSL_RSA_PRIVATE_DECRYPT 187
\r
1983 #define SSL_F_SSL_RSA_PUBLIC_ENCRYPT 188
\r
1984 #define SSL_F_SSL_SESSION_NEW 189
\r
1985 #define SSL_F_SSL_SESSION_PRINT_FP 190
\r
1986 #define SSL_F_SSL_SESS_CERT_NEW 225
\r
1987 #define SSL_F_SSL_SET_CERT 191
\r
1988 #define SSL_F_SSL_SET_CIPHER_LIST 271
\r
1989 #define SSL_F_SSL_SET_FD 192
\r
1990 #define SSL_F_SSL_SET_PKEY 193
\r
1991 #define SSL_F_SSL_SET_PURPOSE 227
\r
1992 #define SSL_F_SSL_SET_RFD 194
\r
1993 #define SSL_F_SSL_SET_SESSION 195
\r
1994 #define SSL_F_SSL_SET_SESSION_ID_CONTEXT 218
\r
1995 #define SSL_F_SSL_SET_SESSION_TICKET_EXT 294
\r
1996 #define SSL_F_SSL_SET_TRUST 228
\r
1997 #define SSL_F_SSL_SET_WFD 196
\r
1998 #define SSL_F_SSL_SHUTDOWN 224
\r
1999 #define SSL_F_SSL_UNDEFINED_CONST_FUNCTION 243
\r
2000 #define SSL_F_SSL_UNDEFINED_FUNCTION 197
\r
2001 #define SSL_F_SSL_UNDEFINED_VOID_FUNCTION 244
\r
2002 #define SSL_F_SSL_USE_CERTIFICATE 198
\r
2003 #define SSL_F_SSL_USE_CERTIFICATE_ASN1 199
\r
2004 #define SSL_F_SSL_USE_CERTIFICATE_FILE 200
\r
2005 #define SSL_F_SSL_USE_PRIVATEKEY 201
\r
2006 #define SSL_F_SSL_USE_PRIVATEKEY_ASN1 202
\r
2007 #define SSL_F_SSL_USE_PRIVATEKEY_FILE 203
\r
2008 #define SSL_F_SSL_USE_PSK_IDENTITY_HINT 273
\r
2009 #define SSL_F_SSL_USE_RSAPRIVATEKEY 204
\r
2010 #define SSL_F_SSL_USE_RSAPRIVATEKEY_ASN1 205
\r
2011 #define SSL_F_SSL_USE_RSAPRIVATEKEY_FILE 206
\r
2012 #define SSL_F_SSL_VERIFY_CERT_CHAIN 207
\r
2013 #define SSL_F_SSL_WRITE 208
\r
2014 #define SSL_F_TLS1_CERT_VERIFY_MAC 286
\r
2015 #define SSL_F_TLS1_CHANGE_CIPHER_STATE 209
\r
2016 #define SSL_F_TLS1_CHECK_SERVERHELLO_TLSEXT 274
\r
2017 #define SSL_F_TLS1_ENC 210
\r
2018 #define SSL_F_TLS1_PREPARE_CLIENTHELLO_TLSEXT 275
\r
2019 #define SSL_F_TLS1_PREPARE_SERVERHELLO_TLSEXT 276
\r
2020 #define SSL_F_TLS1_PRF 284
\r
2021 #define SSL_F_TLS1_SETUP_KEY_BLOCK 211
\r
2022 #define SSL_F_WRITE_PENDING 212
\r
2024 /* Reason codes. */
\r
2025 #define SSL_R_APP_DATA_IN_HANDSHAKE 100
\r
2026 #define SSL_R_ATTEMPT_TO_REUSE_SESSION_IN_DIFFERENT_CONTEXT 272
\r
2027 #define SSL_R_BAD_ALERT_RECORD 101
\r
2028 #define SSL_R_BAD_AUTHENTICATION_TYPE 102
\r
2029 #define SSL_R_BAD_CHANGE_CIPHER_SPEC 103
\r
2030 #define SSL_R_BAD_CHECKSUM 104
\r
2031 #define SSL_R_BAD_DATA_RETURNED_BY_CALLBACK 106
\r
2032 #define SSL_R_BAD_DECOMPRESSION 107
\r
2033 #define SSL_R_BAD_DH_G_LENGTH 108
\r
2034 #define SSL_R_BAD_DH_PUB_KEY_LENGTH 109
\r
2035 #define SSL_R_BAD_DH_P_LENGTH 110
\r
2036 #define SSL_R_BAD_DIGEST_LENGTH 111
\r
2037 #define SSL_R_BAD_DSA_SIGNATURE 112
\r
2038 #define SSL_R_BAD_ECC_CERT 304
\r
2039 #define SSL_R_BAD_ECDSA_SIGNATURE 305
\r
2040 #define SSL_R_BAD_ECPOINT 306
\r
2041 #define SSL_R_BAD_HANDSHAKE_LENGTH 332
\r
2042 #define SSL_R_BAD_HELLO_REQUEST 105
\r
2043 #define SSL_R_BAD_LENGTH 271
\r
2044 #define SSL_R_BAD_MAC_DECODE 113
\r
2045 #define SSL_R_BAD_MAC_LENGTH 333
\r
2046 #define SSL_R_BAD_MESSAGE_TYPE 114
\r
2047 #define SSL_R_BAD_PACKET_LENGTH 115
\r
2048 #define SSL_R_BAD_PROTOCOL_VERSION_NUMBER 116
\r
2049 #define SSL_R_BAD_PSK_IDENTITY_HINT_LENGTH 316
\r
2050 #define SSL_R_BAD_RESPONSE_ARGUMENT 117
\r
2051 #define SSL_R_BAD_RSA_DECRYPT 118
\r
2052 #define SSL_R_BAD_RSA_ENCRYPT 119
\r
2053 #define SSL_R_BAD_RSA_E_LENGTH 120
\r
2054 #define SSL_R_BAD_RSA_MODULUS_LENGTH 121
\r
2055 #define SSL_R_BAD_RSA_SIGNATURE 122
\r
2056 #define SSL_R_BAD_SIGNATURE 123
\r
2057 #define SSL_R_BAD_SSL_FILETYPE 124
\r
2058 #define SSL_R_BAD_SSL_SESSION_ID_LENGTH 125
\r
2059 #define SSL_R_BAD_STATE 126
\r
2060 #define SSL_R_BAD_WRITE_RETRY 127
\r
2061 #define SSL_R_BIO_NOT_SET 128
\r
2062 #define SSL_R_BLOCK_CIPHER_PAD_IS_WRONG 129
\r
2063 #define SSL_R_BN_LIB 130
\r
2064 #define SSL_R_CA_DN_LENGTH_MISMATCH 131
\r
2065 #define SSL_R_CA_DN_TOO_LONG 132
\r
2066 #define SSL_R_CCS_RECEIVED_EARLY 133
\r
2067 #define SSL_R_CERTIFICATE_VERIFY_FAILED 134
\r
2068 #define SSL_R_CERT_LENGTH_MISMATCH 135
\r
2069 #define SSL_R_CHALLENGE_IS_DIFFERENT 136
\r
2070 #define SSL_R_CIPHER_CODE_WRONG_LENGTH 137
\r
2071 #define SSL_R_CIPHER_OR_HASH_UNAVAILABLE 138
\r
2072 #define SSL_R_CIPHER_TABLE_SRC_ERROR 139
\r
2073 #define SSL_R_CLIENTHELLO_TLSEXT 226
\r
2074 #define SSL_R_COMPRESSED_LENGTH_TOO_LONG 140
\r
2075 #define SSL_R_COMPRESSION_DISABLED 343
\r
2076 #define SSL_R_COMPRESSION_FAILURE 141
\r
2077 #define SSL_R_COMPRESSION_ID_NOT_WITHIN_PRIVATE_RANGE 307
\r
2078 #define SSL_R_COMPRESSION_LIBRARY_ERROR 142
\r
2079 #define SSL_R_CONNECTION_ID_IS_DIFFERENT 143
\r
2080 #define SSL_R_CONNECTION_TYPE_NOT_SET 144
\r
2081 #define SSL_R_COOKIE_MISMATCH 308
\r
2082 #define SSL_R_DATA_BETWEEN_CCS_AND_FINISHED 145
\r
2083 #define SSL_R_DATA_LENGTH_TOO_LONG 146
\r
2084 #define SSL_R_DECRYPTION_FAILED 147
\r
2085 #define SSL_R_DECRYPTION_FAILED_OR_BAD_RECORD_MAC 281
\r
2086 #define SSL_R_DH_PUBLIC_VALUE_LENGTH_IS_WRONG 148
\r
2087 #define SSL_R_DIGEST_CHECK_FAILED 149
\r
2088 #define SSL_R_DTLS_MESSAGE_TOO_BIG 334
\r
2089 #define SSL_R_DUPLICATE_COMPRESSION_ID 309
\r
2090 #define SSL_R_ECC_CERT_NOT_FOR_KEY_AGREEMENT 317
\r
2091 #define SSL_R_ECC_CERT_NOT_FOR_SIGNING 318
\r
2092 #define SSL_R_ECC_CERT_SHOULD_HAVE_RSA_SIGNATURE 322
\r
2093 #define SSL_R_ECC_CERT_SHOULD_HAVE_SHA1_SIGNATURE 323
\r
2094 #define SSL_R_ECGROUP_TOO_LARGE_FOR_CIPHER 310
\r
2095 #define SSL_R_ENCRYPTED_LENGTH_TOO_LONG 150
\r
2096 #define SSL_R_ERROR_GENERATING_TMP_RSA_KEY 282
\r
2097 #define SSL_R_ERROR_IN_RECEIVED_CIPHER_LIST 151
\r
2098 #define SSL_R_EXCESSIVE_MESSAGE_SIZE 152
\r
2099 #define SSL_R_EXTRA_DATA_IN_MESSAGE 153
\r
2100 #define SSL_R_GOT_A_FIN_BEFORE_A_CCS 154
\r
2101 #define SSL_R_HTTPS_PROXY_REQUEST 155
\r
2102 #define SSL_R_HTTP_REQUEST 156
\r
2103 #define SSL_R_ILLEGAL_PADDING 283
\r
2104 #define SSL_R_INCONSISTENT_COMPRESSION 340
\r
2105 #define SSL_R_INVALID_CHALLENGE_LENGTH 158
\r
2106 #define SSL_R_INVALID_COMMAND 280
\r
2107 #define SSL_R_INVALID_COMPRESSION_ALGORITHM 341
\r
2108 #define SSL_R_INVALID_PURPOSE 278
\r
2109 #define SSL_R_INVALID_STATUS_RESPONSE 328
\r
2110 #define SSL_R_INVALID_TICKET_KEYS_LENGTH 325
\r
2111 #define SSL_R_INVALID_TRUST 279
\r
2112 #define SSL_R_KEY_ARG_TOO_LONG 284
\r
2113 #define SSL_R_KRB5 285
\r
2114 #define SSL_R_KRB5_C_CC_PRINC 286
\r
2115 #define SSL_R_KRB5_C_GET_CRED 287
\r
2116 #define SSL_R_KRB5_C_INIT 288
\r
2117 #define SSL_R_KRB5_C_MK_REQ 289
\r
2118 #define SSL_R_KRB5_S_BAD_TICKET 290
\r
2119 #define SSL_R_KRB5_S_INIT 291
\r
2120 #define SSL_R_KRB5_S_RD_REQ 292
\r
2121 #define SSL_R_KRB5_S_TKT_EXPIRED 293
\r
2122 #define SSL_R_KRB5_S_TKT_NYV 294
\r
2123 #define SSL_R_KRB5_S_TKT_SKEW 295
\r
2124 #define SSL_R_LENGTH_MISMATCH 159
\r
2125 #define SSL_R_LENGTH_TOO_SHORT 160
\r
2126 #define SSL_R_LIBRARY_BUG 274
\r
2127 #define SSL_R_LIBRARY_HAS_NO_CIPHERS 161
\r
2128 #define SSL_R_MESSAGE_TOO_LONG 296
\r
2129 #define SSL_R_MISSING_DH_DSA_CERT 162
\r
2130 #define SSL_R_MISSING_DH_KEY 163
\r
2131 #define SSL_R_MISSING_DH_RSA_CERT 164
\r
2132 #define SSL_R_MISSING_DSA_SIGNING_CERT 165
\r
2133 #define SSL_R_MISSING_EXPORT_TMP_DH_KEY 166
\r
2134 #define SSL_R_MISSING_EXPORT_TMP_RSA_KEY 167
\r
2135 #define SSL_R_MISSING_RSA_CERTIFICATE 168
\r
2136 #define SSL_R_MISSING_RSA_ENCRYPTING_CERT 169
\r
2137 #define SSL_R_MISSING_RSA_SIGNING_CERT 170
\r
2138 #define SSL_R_MISSING_TMP_DH_KEY 171
\r
2139 #define SSL_R_MISSING_TMP_ECDH_KEY 311
\r
2140 #define SSL_R_MISSING_TMP_RSA_KEY 172
\r
2141 #define SSL_R_MISSING_TMP_RSA_PKEY 173
\r
2142 #define SSL_R_MISSING_VERIFY_MESSAGE 174
\r
2143 #define SSL_R_MULTIPLE_SGC_RESTARTS 346
\r
2144 #define SSL_R_NON_SSLV2_INITIAL_PACKET 175
\r
2145 #define SSL_R_NO_CERTIFICATES_RETURNED 176
\r
2146 #define SSL_R_NO_CERTIFICATE_ASSIGNED 177
\r
2147 #define SSL_R_NO_CERTIFICATE_RETURNED 178
\r
2148 #define SSL_R_NO_CERTIFICATE_SET 179
\r
2149 #define SSL_R_NO_CERTIFICATE_SPECIFIED 180
\r
2150 #define SSL_R_NO_CIPHERS_AVAILABLE 181
\r
2151 #define SSL_R_NO_CIPHERS_PASSED 182
\r
2152 #define SSL_R_NO_CIPHERS_SPECIFIED 183
\r
2153 #define SSL_R_NO_CIPHER_LIST 184
\r
2154 #define SSL_R_NO_CIPHER_MATCH 185
\r
2155 #define SSL_R_NO_CLIENT_CERT_METHOD 331
\r
2156 #define SSL_R_NO_CLIENT_CERT_RECEIVED 186
\r
2157 #define SSL_R_NO_COMPRESSION_SPECIFIED 187
\r
2158 #define SSL_R_NO_GOST_CERTIFICATE_SENT_BY_PEER 330
\r
2159 #define SSL_R_NO_METHOD_SPECIFIED 188
\r
2160 #define SSL_R_NO_PRIVATEKEY 189
\r
2161 #define SSL_R_NO_PRIVATE_KEY_ASSIGNED 190
\r
2162 #define SSL_R_NO_PROTOCOLS_AVAILABLE 191
\r
2163 #define SSL_R_NO_PUBLICKEY 192
\r
2164 #define SSL_R_NO_RENEGOTIATION 339
\r
2165 #define SSL_R_NO_REQUIRED_DIGEST 324
\r
2166 #define SSL_R_NO_SHARED_CIPHER 193
\r
2167 #define SSL_R_NO_VERIFY_CALLBACK 194
\r
2168 #define SSL_R_NULL_SSL_CTX 195
\r
2169 #define SSL_R_NULL_SSL_METHOD_PASSED 196
\r
2170 #define SSL_R_OLD_SESSION_CIPHER_NOT_RETURNED 197
\r
2171 #define SSL_R_OLD_SESSION_COMPRESSION_ALGORITHM_NOT_RETURNED 344
\r
2172 #define SSL_R_ONLY_TLS_ALLOWED_IN_FIPS_MODE 297
\r
2173 #define SSL_R_OPAQUE_PRF_INPUT_TOO_LONG 327
\r
2174 #define SSL_R_PACKET_LENGTH_TOO_LONG 198
\r
2175 #define SSL_R_PARSE_TLSEXT 227
\r
2176 #define SSL_R_PATH_TOO_LONG 270
\r
2177 #define SSL_R_PEER_DID_NOT_RETURN_A_CERTIFICATE 199
\r
2178 #define SSL_R_PEER_ERROR 200
\r
2179 #define SSL_R_PEER_ERROR_CERTIFICATE 201
\r
2180 #define SSL_R_PEER_ERROR_NO_CERTIFICATE 202
\r
2181 #define SSL_R_PEER_ERROR_NO_CIPHER 203
\r
2182 #define SSL_R_PEER_ERROR_UNSUPPORTED_CERTIFICATE_TYPE 204
\r
2183 #define SSL_R_PRE_MAC_LENGTH_TOO_LONG 205
\r
2184 #define SSL_R_PROBLEMS_MAPPING_CIPHER_FUNCTIONS 206
\r
2185 #define SSL_R_PROTOCOL_IS_SHUTDOWN 207
\r
2186 #define SSL_R_PSK_IDENTITY_NOT_FOUND 223
\r
2187 #define SSL_R_PSK_NO_CLIENT_CB 224
\r
2188 #define SSL_R_PSK_NO_SERVER_CB 225
\r
2189 #define SSL_R_PUBLIC_KEY_ENCRYPT_ERROR 208
\r
2190 #define SSL_R_PUBLIC_KEY_IS_NOT_RSA 209
\r
2191 #define SSL_R_PUBLIC_KEY_NOT_RSA 210
\r
2192 #define SSL_R_READ_BIO_NOT_SET 211
\r
2193 #define SSL_R_READ_TIMEOUT_EXPIRED 312
\r
2194 #define SSL_R_READ_WRONG_PACKET_TYPE 212
\r
2195 #define SSL_R_RECORD_LENGTH_MISMATCH 213
\r
2196 #define SSL_R_RECORD_TOO_LARGE 214
\r
2197 #define SSL_R_RECORD_TOO_SMALL 298
\r
2198 #define SSL_R_RENEGOTIATE_EXT_TOO_LONG 335
\r
2199 #define SSL_R_RENEGOTIATION_ENCODING_ERR 336
\r
2200 #define SSL_R_RENEGOTIATION_MISMATCH 337
\r
2201 #define SSL_R_REQUIRED_CIPHER_MISSING 215
\r
2202 #define SSL_R_REQUIRED_COMPRESSSION_ALGORITHM_MISSING 342
\r
2203 #define SSL_R_REUSE_CERT_LENGTH_NOT_ZERO 216
\r
2204 #define SSL_R_REUSE_CERT_TYPE_NOT_ZERO 217
\r
2205 #define SSL_R_REUSE_CIPHER_LIST_NOT_ZERO 218
\r
2206 #define SSL_R_SCSV_RECEIVED_WHEN_RENEGOTIATING 345
\r
2207 #define SSL_R_SERVERHELLO_TLSEXT 275
\r
2208 #define SSL_R_SESSION_ID_CONTEXT_UNINITIALIZED 277
\r
2209 #define SSL_R_SHORT_READ 219
\r
2210 #define SSL_R_SIGNATURE_FOR_NON_SIGNING_CERTIFICATE 220
\r
2211 #define SSL_R_SSL23_DOING_SESSION_ID_REUSE 221
\r
2212 #define SSL_R_SSL2_CONNECTION_ID_TOO_LONG 299
\r
2213 #define SSL_R_SSL3_EXT_INVALID_ECPOINTFORMAT 321
\r
2214 #define SSL_R_SSL3_EXT_INVALID_SERVERNAME 319
\r
2215 #define SSL_R_SSL3_EXT_INVALID_SERVERNAME_TYPE 320
\r
2216 #define SSL_R_SSL3_SESSION_ID_TOO_LONG 300
\r
2217 #define SSL_R_SSL3_SESSION_ID_TOO_SHORT 222
\r
2218 #define SSL_R_SSLV3_ALERT_BAD_CERTIFICATE 1042
\r
2219 #define SSL_R_SSLV3_ALERT_BAD_RECORD_MAC 1020
\r
2220 #define SSL_R_SSLV3_ALERT_CERTIFICATE_EXPIRED 1045
\r
2221 #define SSL_R_SSLV3_ALERT_CERTIFICATE_REVOKED 1044
\r
2222 #define SSL_R_SSLV3_ALERT_CERTIFICATE_UNKNOWN 1046
\r
2223 #define SSL_R_SSLV3_ALERT_DECOMPRESSION_FAILURE 1030
\r
2224 #define SSL_R_SSLV3_ALERT_HANDSHAKE_FAILURE 1040
\r
2225 #define SSL_R_SSLV3_ALERT_ILLEGAL_PARAMETER 1047
\r
2226 #define SSL_R_SSLV3_ALERT_NO_CERTIFICATE 1041
\r
2227 #define SSL_R_SSLV3_ALERT_UNEXPECTED_MESSAGE 1010
\r
2228 #define SSL_R_SSLV3_ALERT_UNSUPPORTED_CERTIFICATE 1043
\r
2229 #define SSL_R_SSL_CTX_HAS_NO_DEFAULT_SSL_VERSION 228
\r
2230 #define SSL_R_SSL_HANDSHAKE_FAILURE 229
\r
2231 #define SSL_R_SSL_LIBRARY_HAS_NO_CIPHERS 230
\r
2232 #define SSL_R_SSL_SESSION_ID_CALLBACK_FAILED 301
\r
2233 #define SSL_R_SSL_SESSION_ID_CONFLICT 302
\r
2234 #define SSL_R_SSL_SESSION_ID_CONTEXT_TOO_LONG 273
\r
2235 #define SSL_R_SSL_SESSION_ID_HAS_BAD_LENGTH 303
\r
2236 #define SSL_R_SSL_SESSION_ID_IS_DIFFERENT 231
\r
2237 #define SSL_R_TLSV1_ALERT_ACCESS_DENIED 1049
\r
2238 #define SSL_R_TLSV1_ALERT_DECODE_ERROR 1050
\r
2239 #define SSL_R_TLSV1_ALERT_DECRYPTION_FAILED 1021
\r
2240 #define SSL_R_TLSV1_ALERT_DECRYPT_ERROR 1051
\r
2241 #define SSL_R_TLSV1_ALERT_EXPORT_RESTRICTION 1060
\r
2242 #define SSL_R_TLSV1_ALERT_INSUFFICIENT_SECURITY 1071
\r
2243 #define SSL_R_TLSV1_ALERT_INTERNAL_ERROR 1080
\r
2244 #define SSL_R_TLSV1_ALERT_NO_RENEGOTIATION 1100
\r
2245 #define SSL_R_TLSV1_ALERT_PROTOCOL_VERSION 1070
\r
2246 #define SSL_R_TLSV1_ALERT_RECORD_OVERFLOW 1022
\r
2247 #define SSL_R_TLSV1_ALERT_UNKNOWN_CA 1048
\r
2248 #define SSL_R_TLSV1_ALERT_USER_CANCELLED 1090
\r
2249 #define SSL_R_TLSV1_BAD_CERTIFICATE_HASH_VALUE 1114
\r
2250 #define SSL_R_TLSV1_BAD_CERTIFICATE_STATUS_RESPONSE 1113
\r
2251 #define SSL_R_TLSV1_CERTIFICATE_UNOBTAINABLE 1111
\r
2252 #define SSL_R_TLSV1_UNRECOGNIZED_NAME 1112
\r
2253 #define SSL_R_TLSV1_UNSUPPORTED_EXTENSION 1110
\r
2254 #define SSL_R_TLS_CLIENT_CERT_REQ_WITH_ANON_CIPHER 232
\r
2255 #define SSL_R_TLS_INVALID_ECPOINTFORMAT_LIST 157
\r
2256 #define SSL_R_TLS_PEER_DID_NOT_RESPOND_WITH_CERTIFICATE_LIST 233
\r
2257 #define SSL_R_TLS_RSA_ENCRYPTED_VALUE_LENGTH_IS_WRONG 234
\r
2258 #define SSL_R_TRIED_TO_USE_UNSUPPORTED_CIPHER 235
\r
2259 #define SSL_R_UNABLE_TO_DECODE_DH_CERTS 236
\r
2260 #define SSL_R_UNABLE_TO_DECODE_ECDH_CERTS 313
\r
2261 #define SSL_R_UNABLE_TO_EXTRACT_PUBLIC_KEY 237
\r
2262 #define SSL_R_UNABLE_TO_FIND_DH_PARAMETERS 238
\r
2263 #define SSL_R_UNABLE_TO_FIND_ECDH_PARAMETERS 314
\r
2264 #define SSL_R_UNABLE_TO_FIND_PUBLIC_KEY_PARAMETERS 239
\r
2265 #define SSL_R_UNABLE_TO_FIND_SSL_METHOD 240
\r
2266 #define SSL_R_UNABLE_TO_LOAD_SSL2_MD5_ROUTINES 241
\r
2267 #define SSL_R_UNABLE_TO_LOAD_SSL3_MD5_ROUTINES 242
\r
2268 #define SSL_R_UNABLE_TO_LOAD_SSL3_SHA1_ROUTINES 243
\r
2269 #define SSL_R_UNEXPECTED_MESSAGE 244
\r
2270 #define SSL_R_UNEXPECTED_RECORD 245
\r
2271 #define SSL_R_UNINITIALIZED 276
\r
2272 #define SSL_R_UNKNOWN_ALERT_TYPE 246
\r
2273 #define SSL_R_UNKNOWN_CERTIFICATE_TYPE 247
\r
2274 #define SSL_R_UNKNOWN_CIPHER_RETURNED 248
\r
2275 #define SSL_R_UNKNOWN_CIPHER_TYPE 249
\r
2276 #define SSL_R_UNKNOWN_KEY_EXCHANGE_TYPE 250
\r
2277 #define SSL_R_UNKNOWN_PKEY_TYPE 251
\r
2278 #define SSL_R_UNKNOWN_PROTOCOL 252
\r
2279 #define SSL_R_UNKNOWN_REMOTE_ERROR_TYPE 253
\r
2280 #define SSL_R_UNKNOWN_SSL_VERSION 254
\r
2281 #define SSL_R_UNKNOWN_STATE 255
\r
2282 #define SSL_R_UNSAFE_LEGACY_RENEGOTIATION_DISABLED 338
\r
2283 #define SSL_R_UNSUPPORTED_CIPHER 256
\r
2284 #define SSL_R_UNSUPPORTED_COMPRESSION_ALGORITHM 257
\r
2285 #define SSL_R_UNSUPPORTED_DIGEST_TYPE 326
\r
2286 #define SSL_R_UNSUPPORTED_ELLIPTIC_CURVE 315
\r
2287 #define SSL_R_UNSUPPORTED_PROTOCOL 258
\r
2288 #define SSL_R_UNSUPPORTED_SSL_VERSION 259
\r
2289 #define SSL_R_UNSUPPORTED_STATUS_TYPE 329
\r
2290 #define SSL_R_WRITE_BIO_NOT_SET 260
\r
2291 #define SSL_R_WRONG_CIPHER_RETURNED 261
\r
2292 #define SSL_R_WRONG_MESSAGE_TYPE 262
\r
2293 #define SSL_R_WRONG_NUMBER_OF_KEY_BITS 263
\r
2294 #define SSL_R_WRONG_SIGNATURE_LENGTH 264
\r
2295 #define SSL_R_WRONG_SIGNATURE_SIZE 265
\r
2296 #define SSL_R_WRONG_SSL_VERSION 266
\r
2297 #define SSL_R_WRONG_VERSION_NUMBER 267
\r
2298 #define SSL_R_X509_LIB 268
\r
2299 #define SSL_R_X509_VERIFICATION_SETUP_PROBLEMS 269
\r
2301 #ifdef __cplusplus
\r
OSDN Git Service
