# limitations under the License.
#
ifneq ($(TARGET_SIMULATOR),true)
+ifeq ($(BOARD_HAVE_BLUETOOTH),true)
include $(all-subdir-makefiles)
endif
+endif
--- /dev/null
+Maxim Krasnyansky <maxk@qualcomm.com>
+Marcel Holtmann <marcel@holtmann.org>
+Wayne Lee <waynelee@qualcomm.com>
+Ricky Yuen <ryuen@qualcomm.com>
+Takashi Sasai <sasai@sm.sony.co.jp>
--- /dev/null
+LOCAL_PATH:= $(call my-dir)
+include $(CLEAR_VARS)
+
+LOCAL_C_INCLUDES:= \
+ $(call include-path-for,bluez-libs)
+
+LOCAL_CFLAGS:= \
+ -DVERSION=\"1.41\" \
+
+LOCAL_SRC_FILES:= \
+ src/hcidump.c \
+ parser/avctp.c \
+ parser/avdtp.c \
+ parser/bnep.c \
+ parser/bpa.c \
+ parser/capi.c \
+ parser/cmtp.c \
+ parser/csr.c \
+ parser/ericsson.c \
+ parser/hci.c \
+ parser/hcrp.c \
+ parser/hidp.c \
+ parser/l2cap.c \
+ parser/lmp.c \
+ parser/obex.c \
+ parser/parser.c \
+ parser/ppp.c \
+ parser/rfcomm.c \
+ parser/sdp.c \
+ parser/tcpip.c
+
+LOCAL_SHARED_LIBRARIES := \
+ libbluetooth
+
+LOCAL_MODULE_PATH := $(TARGET_OUT_OPTIONAL_EXECUTABLES)
+LOCAL_MODULE_TAGS := eng
+LOCAL_MODULE:=hcidump
+
+include $(BUILD_EXECUTABLE)
--- /dev/null
+ver 1.41:
+ Improve decoding of HCI connection link type.
+ Fix handling of unsupported L2CAP config options.
+ Add full decoding of L2CAP RFC config option.
+ Reset to L2CAP basic mode when MTU config request is sent.
+
+ver 1.40:
+ Add HCI and LMP decoding support for Simple Pairing.
+
+ Note:
+ This version needs at least bluez-libs-3.14
+
+ver 1.39:
+ Add support for daemon discover protocol.
+ Fix device disconnect handling.
+
+ver 1.38:
+ Add support for daemon mode.
+
+ver 1.37:
+ Add decoding for SCO packet flags.
+ Add decoding for more extended inquiry features.
+ Add missing HCI command and event decodings.
+
+ Note:
+ This version needs at least bluez-libs-3.12
+
+ver 1.36:
+ Add missing HCI command definitions.
+ Add missing HCI event definitions.
+ Add missing HCI error definitions.
+
+ver 1.35:
+ Add partial decoding for eSCO setup.
+ Fix HCI command array size.
+
+ver 1.34:
+ Add reading support for MacOS X packet logger format.
+ Add decoding for AFH host channel classification command.
+ Add decoding for QoS setup command.
+
+ver 1.33:
+ Add support for IPv6 decoding.
+ Add IPv6 connection support.
+
+ver 1.32:
+ Add decoding for link supervision timeout change event.
+ Add decoding for host controller to host flow control setting.
+ Add decoding for host number of completed packets.
+ Add decoding for host buffer size command.
+ Fix OBEX header parsing.
+
+ Note:
+ This version needs at least bluez-libs-3.3
+
+ver 1.31:
+ Add Ericsson LMP decoding support.
+ Update sniff subrating decoding.
+ Update UUID and attribute definitions.
+
+ Note:
+ This version needs at least bluez-libs-3.0
+
+ver 1.30:
+ Add decoding for pause encryption feature.
+ Add generic RFCOMM streaming helpers.
+ Add HDLC decoding support to the PPP parser.
+ Add unslip support and basic protocol decoding.
+ Add PPP extraction support.
+ Move TCP/IP decoders into a separate file.
+ Fix DoS problem of the L2CAP parser.
+
+ver 1.29:
+ Obfuscate the BD_ADDR if no vendor events are requested.
+ Decode and display binary strings correctly.
+ Allow null-terminated text strings.
+ Add definitions for Apple Agent.
+ Add skeleton for AVCTP parser.
+ Add skeleton for PPP parser.
+
+ver 1.28:
+ Add missing UUID definitions and translations.
+ Add option to disable vendor commands and events.
+ Add decoding for hold mode, sniff mode and park state.
+ Add decoding for sniff subrate command complete event.
+ Decode class of device and BD_ADDR for inquiry filter.
+ Make it possible to obfuscate pin codes and link keys.
+
+ Note:
+ This version needs at least bluez-libs-2.23
+
+ver 1.27:
+ Decode the extended inquiry response payload.
+ Update HCI_DEV_NONE frame format.
+ Update the CSR PS key handling.
+ Add another bunch LMP message decodings.
+ Add compile time buffer checks (FORTIFY SOURCE).
+
+ver 1.26:
+ Fix memory leak with lmp_vertostr() function.
+ Fix FHS packet decoding for slave connections.
+ Add support for decoding more LMP messages.
+ Display the data of extended inquiry results.
+ Correct HCI command and event string arrays.
+ Add SCO audio extraction support.
+
+ver 1.25:
+ Add new attribute identifiers and UUID definitions.
+ Add decoding support for extended inquiry response.
+ Add more detailed BCCMD decoding.
+
+ Note:
+ This version needs at least bluez-libs-2.20
+
+ver 1.24:
+ Allow selection of system device.
+ Handle system events and commands.
+
+ver 1.23:
+ Add decoding support for inquiry scan type.
+ Fix connection accept timeout and scan enable decoding.
+ Show human readable timestamps only in verbose decoding mode.
+ Dump raw BNEP payload only in non-verbose decoding mode.
+ Update CSR BCCMD support and correct uint32 decoding.
+
+ Note:
+ This version needs at least bluez-libs-2.18
+
+ver 1.22:
+ Only do verbose decoding when requested.
+ Fix number of completed packets decoding.
+ Improve the decoding of CSR vendor commands and events.
+ Use human readable timestamps.
+ Add support for the BTSnoop file format.
+
+ver 1.21:
+ Clear L2CAP states when receiving the HCI disconnect.
+ Make the OBEX parser aware of that RFCOMM is a stream.
+ Update HCI verbose decoding routines.
+ Add CSR verbose decoding support.
+
+ Note:
+ This version needs at least bluez-libs-2.17
+
+ver 1.20:
+ Workaround for inquiry results with RSSI and page scan mode.
+ Decode almost every used HCI commands and events.
+
+ Note:
+ This version needs at least bluez-libs-2.16
+
+ver 1.19:
+ Fix error message decoding.
+ Add IAC decoding support.
+ Add LMP parser support.
+ Add BCCMD decoding support.
+ Add L2CAP retransmission and flow control decoding.
+
+ver 1.18:
+ Fix declaration of the SDP data structures.
+ Extend the HCI verbose decoding support.
+
+ver 1.17:
+ Add support for HCI verbose decoding.
+ Add support for L2CAP verbose decoding.
+ Add first version of the BPA sniffer utility.
+
+ Note:
+ This version needs at least bluez-libs-2.15
+
+ver 1.16:
+ Add UUID translation for WAP.
+ Fix display of UUID 128.
+ Fix display of L2CAP config hint bit and QoS option.
+ Fix parsing of SDP continuation state.
+
+ver 1.15:
+ Update the L2CAP channel counting routine.
+ Fix SBC codec specific decoding.
+ Fix AVDTP signal channel header decoding.
+ Add decoding for the AVDTP media channel header.
+
+ver 1.14:
+ Count the number of L2CAP channels per PSM.
+ Differ between the AVDTP signal and media channel.
+ Add full decoding of the AVDTP signal channel information.
+
+ver 1.13:
+ Update many UUID to text translations.
+ Add support for sending and receiving dumps over TCP.
+ Add support for the vendor packets of the Digianswer BPA.
+
+ Note:
+ This version needs at least bluez-libs-2.11
+
+ver 1.12:
+ Fix whitespace stuff for extended dump.
+ Add support for dynamic RFCOMM channels.
+ Add initial OBEX parser support.
+
+ver 1.11:
+ Trace company id from the chip manufacturer.
+ Support extended dump functionality.
+ Use the L2CAP_CONF_RFC_MODE value.
+ Use bt_get_unaligned() for unaligned access.
+ Make compiling with debug information optional.
+ Don't override CFLAGS from configure.
+
+ Note:
+ This version needs at least bluez-libs-2.10
+
+ver 1.10:
+ Fix display of L2CAP CID.
+ Show L2CAP config values only when they are present.
+ Decode L2CAP information request and response.
+ Update autoconf and automake routines.
+
+ver 1.9:
+ Initial AVDTP parser support.
+ Various minor fixes and cleanups.
+
+ver 1.8:
+ Support Bluetooth 1.2 HCI commands and events.
+ Decode RFCOMM credit based flow control.
+
+ver 1.7:
+ HCRP parser support.
+ CAPI parser support.
+ CMTP reassembly support.
+ Support for dynamic PSM.
+
+ver 1.6:
+ HIDP parser support.
+ Various fixes for the SDP parser.
+
+ver 1.5:
+ Included man page for hcidump.
+ Minor fix for HCI grabber.
+
+ver 1.4:
+ CMTP parser support.
+ Various fixes for SDP, RFCOMM and BNEP parsers.
+
+ver 1.3:
+ RFCOMM and BNEP parser fixes.
+ Use getopt_long instead of argp.
+ Added --psm option.
+ Automake build environment.
+ Other minor fixes.
+
+ver 1.2:
+ BNEP support.
+ Correct filter initialization.
+ Minor fixes.
+
+ver 1.1:
+ SCO support.
+ Support for frame time stamps.
+ RAW mode and other minor fixes.
+
+ver 1.0:
+ L2CAP fragment reassembly.
+ RFCOMM parser (Wayne Lee).
+ SDP parser (Ricky Yuen).
+ Simple filtering.
+
+ver 0.2:
+ L2CAP parsing. PSM tracking.
+ HCI events and commands parsing.
+ Packet parser moved to unified library (libparser).
+ HCI socket filter support.
+ Improved command line option parsing.
+ Improved output format.
+
+ver 0.1:
+ Initial implementation.
--- /dev/null
+Installation Instructions
+*************************
+
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005 Free
+Software Foundation, Inc.
+
+This file is free documentation; the Free Software Foundation gives
+unlimited permission to copy, distribute and modify it.
+
+Basic Installation
+==================
+
+These are generic installation instructions.
+
+ The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation. It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions. Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, and a
+file `config.log' containing compiler output (useful mainly for
+debugging `configure').
+
+ It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring. (Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.)
+
+ If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release. If you are using the cache, and at
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
+
+ The file `configure.ac' (or `configure.in') is used to create
+`configure' by a program called `autoconf'. You only need
+`configure.ac' if you want to change it or regenerate `configure' using
+a newer version of `autoconf'.
+
+The simplest way to compile this package is:
+
+ 1. `cd' to the directory containing the package's source code and type
+ `./configure' to configure the package for your system. If you're
+ using `csh' on an old version of System V, you might need to type
+ `sh ./configure' instead to prevent `csh' from trying to execute
+ `configure' itself.
+
+ Running `configure' takes awhile. While running, it prints some
+ messages telling which features it is checking for.
+
+ 2. Type `make' to compile the package.
+
+ 3. Optionally, type `make check' to run any self-tests that come with
+ the package.
+
+ 4. Type `make install' to install the programs and any data files and
+ documentation.
+
+ 5. You can remove the program binaries and object files from the
+ source code directory by typing `make clean'. To also remove the
+ files that `configure' created (so you can compile the package for
+ a different kind of computer), type `make distclean'. There is
+ also a `make maintainer-clean' target, but that is intended mainly
+ for the package's developers. If you use it, you may have to get
+ all sorts of other programs in order to regenerate files that came
+ with the distribution.
+
+Compilers and Options
+=====================
+
+Some systems require unusual options for compilation or linking that the
+`configure' script does not know about. Run `./configure --help' for
+details on some of the pertinent environment variables.
+
+ You can give `configure' initial values for configuration parameters
+by setting variables in the command line or in the environment. Here
+is an example:
+
+ ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
+
+ *Note Defining Variables::, for more details.
+
+Compiling For Multiple Architectures
+====================================
+
+You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory. To do this, you must use a version of `make' that
+supports the `VPATH' variable, such as GNU `make'. `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script. `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.
+
+ If you have to use a `make' that does not support the `VPATH'
+variable, you have to compile the package for one architecture at a
+time in the source code directory. After you have installed the
+package for one architecture, use `make distclean' before reconfiguring
+for another architecture.
+
+Installation Names
+==================
+
+By default, `make install' will install the package's files in
+`/usr/local/bin', `/usr/local/man', etc. You can specify an
+installation prefix other than `/usr/local' by giving `configure' the
+option `--prefix=PREFIX'.
+
+ You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files. If you
+give `configure' the option `--exec-prefix=PREFIX', the package will
+use PREFIX as the prefix for installing programs and libraries.
+Documentation and other data files will still use the regular prefix.
+
+ In addition, if you use an unusual directory layout you can give
+options like `--bindir=DIR' to specify different values for particular
+kinds of files. Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.
+
+ If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+Optional Features
+=================
+
+Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System). The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+ For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+Specifying the System Type
+==========================
+
+There may be some features `configure' cannot figure out automatically,
+but needs to determine by the type of machine the package will run on.
+Usually, assuming the package is built to be run on the _same_
+architectures, `configure' can figure that out, but if it prints a
+message saying it cannot guess the machine type, give it the
+`--build=TYPE' option. TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+
+ CPU-COMPANY-SYSTEM
+
+where SYSTEM can have one of these forms:
+
+ OS KERNEL-OS
+
+ See the file `config.sub' for the possible values of each field. If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the machine type.
+
+ If you are _building_ compiler tools for cross-compiling, you should
+use the `--target=TYPE' option to select the type of system they will
+produce code for.
+
+ If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with `--host=TYPE'.
+
+Sharing Defaults
+================
+
+If you want to set default values for `configure' scripts to share, you
+can create a site shell script called `config.site' that gives default
+values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists. Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Defining Variables
+==================
+
+Variables not defined in a site shell script can be set in the
+environment passed to `configure'. However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost. In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'. For example:
+
+ ./configure CC=/usr/local2/bin/gcc
+
+causes the specified `gcc' to be used as the C compiler (unless it is
+overridden in the site shell script). Here is a another example:
+
+ /bin/bash ./configure CONFIG_SHELL=/bin/bash
+
+Here the `CONFIG_SHELL=/bin/bash' operand causes subsequent
+configuration-related scripts to be executed by `/bin/bash'.
+
+`configure' Invocation
+======================
+
+`configure' recognizes the following options to control how it operates.
+
+`--help'
+`-h'
+ Print a summary of the options to `configure', and exit.
+
+`--version'
+`-V'
+ Print the version of Autoconf used to generate the `configure'
+ script, and exit.
+
+`--cache-file=FILE'
+ Enable the cache: use and save the results of the tests in FILE,
+ traditionally `config.cache'. FILE defaults to `/dev/null' to
+ disable caching.
+
+`--config-cache'
+`-C'
+ Alias for `--cache-file=config.cache'.
+
+`--quiet'
+`--silent'
+`-q'
+ Do not print messages saying which checks are being made. To
+ suppress all normal output, redirect it to `/dev/null' (any error
+ messages will still be shown).
+
+`--srcdir=DIR'
+ Look for the package's source code in directory DIR. Usually
+ `configure' can determine that directory automatically.
+
+`configure' also accepts some other, not widely useful, options. Run
+`configure --help' for more details.
+
--- /dev/null
+
+SUBDIRS = parser src
+
+MAINTAINERCLEANFILES = Makefile.in \
+ aclocal.m4 configure config.h.in \
+ depcomp missing install-sh mkinstalldirs
--- /dev/null
+# Makefile.in generated by automake 1.10 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = .
+DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
+ $(srcdir)/Makefile.in $(srcdir)/config.h.in \
+ $(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \
+ depcomp install-sh missing
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
+ $(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = config.h
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-dvi-recursive install-exec-recursive \
+ install-html-recursive install-info-recursive \
+ install-pdf-recursive install-ps-recursive install-recursive \
+ installcheck-recursive installdirs-recursive pdf-recursive \
+ ps-recursive uninstall-recursive
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
+ distclean-recursive maintainer-clean-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+ { test ! -d $(distdir) \
+ || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
+ && rm -fr $(distdir); }; }
+DIST_ARCHIVES = $(distdir).tar.gz
+GZIP_ENV = --best
+distuninstallcheck_listfiles = find . -type f -print
+distcleancheck_listfiles = find . -type f -print
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BLUEZ_CFLAGS = @BLUEZ_CFLAGS@
+BLUEZ_LIBS = @BLUEZ_LIBS@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EXEEXT = @EXEEXT@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+RANLIB = @RANLIB@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build_alias = @build_alias@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host_alias = @host_alias@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+SUBDIRS = parser src
+MAINTAINERCLEANFILES = Makefile.in \
+ aclocal.m4 configure config.h.in \
+ depcomp missing install-sh mkinstalldirs
+
+all: config.h
+ $(MAKE) $(AM_MAKEFLAGS) all-recursive
+
+.SUFFIXES:
+am--refresh:
+ @:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \
+ cd $(srcdir) && $(AUTOMAKE) --gnu \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --gnu Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ echo ' $(SHELL) ./config.status'; \
+ $(SHELL) ./config.status;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ $(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+
+config.h: stamp-h1
+ @if test ! -f $@; then \
+ rm -f stamp-h1; \
+ $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
+ else :; fi
+
+stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
+ @rm -f stamp-h1
+ cd $(top_builddir) && $(SHELL) ./config.status config.h
+$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(top_srcdir) && $(AUTOHEADER)
+ rm -f stamp-h1
+ touch $@
+
+distclean-hdr:
+ -rm -f config.h stamp-h1
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+$(RECURSIVE_CLEAN_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ $(am__remove_distdir)
+ test -d $(distdir) || mkdir $(distdir)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(MKDIR_P) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ am__remove_distdir=: \
+ am__skip_length_check=: \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+ -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+ || chmod -R a+r $(distdir)
+dist-gzip: distdir
+ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+ $(am__remove_distdir)
+
+dist-bzip2: distdir
+ tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+ $(am__remove_distdir)
+
+dist-tarZ: distdir
+ tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+ $(am__remove_distdir)
+
+dist-shar: distdir
+ shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+ $(am__remove_distdir)
+
+dist-zip: distdir
+ -rm -f $(distdir).zip
+ zip -rq $(distdir).zip $(distdir)
+ $(am__remove_distdir)
+
+dist dist-all: distdir
+ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+ $(am__remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration. Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+ case '$(DIST_ARCHIVES)' in \
+ *.tar.gz*) \
+ GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
+ *.tar.bz2*) \
+ bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
+ *.tar.Z*) \
+ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+ *.shar.gz*) \
+ GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
+ *.zip*) \
+ unzip $(distdir).zip ;;\
+ esac
+ chmod -R a-w $(distdir); chmod a+w $(distdir)
+ mkdir $(distdir)/_build
+ mkdir $(distdir)/_inst
+ chmod a-w $(distdir)
+ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+ && cd $(distdir)/_build \
+ && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+ $(DISTCHECK_CONFIGURE_FLAGS) \
+ && $(MAKE) $(AM_MAKEFLAGS) \
+ && $(MAKE) $(AM_MAKEFLAGS) dvi \
+ && $(MAKE) $(AM_MAKEFLAGS) check \
+ && $(MAKE) $(AM_MAKEFLAGS) install \
+ && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+ && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+ distuninstallcheck \
+ && chmod -R a-w "$$dc_install_base" \
+ && ({ \
+ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+ } || { rm -rf "$$dc_destdir"; exit 1; }) \
+ && rm -rf "$$dc_destdir" \
+ && $(MAKE) $(AM_MAKEFLAGS) dist \
+ && rm -rf $(DIST_ARCHIVES) \
+ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
+ $(am__remove_distdir)
+ @(echo "$(distdir) archives ready for distribution: "; \
+ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
+distuninstallcheck:
+ @cd $(distuninstallcheck_dir) \
+ && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
+ || { echo "ERROR: files left after uninstall:" ; \
+ if test -n "$(DESTDIR)"; then \
+ echo " (check DESTDIR support)"; \
+ fi ; \
+ $(distuninstallcheck_listfiles) ; \
+ exit 1; } >&2
+distcleancheck: distclean
+ @if test '$(srcdir)' = . ; then \
+ echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+ exit 1 ; \
+ fi
+ @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+ || { echo "ERROR: files left in build directory after distclean:" ; \
+ $(distcleancheck_listfiles) ; \
+ exit 1; } >&2
+check-am: all-am
+check: check-recursive
+all-am: Makefile config.h
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+ -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
+clean: clean-recursive
+
+clean-am: clean-generic mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-hdr distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-recursive
+
+install-exec-am:
+
+install-html: install-html-recursive
+
+install-info: install-info-recursive
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-ps: install-ps-recursive
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -rf $(top_srcdir)/autom4te.cache
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
+ install-strip
+
+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+ all all-am am--refresh check check-am clean clean-generic \
+ ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \
+ dist-shar dist-tarZ dist-zip distcheck distclean \
+ distclean-generic distclean-hdr distclean-tags distcleancheck \
+ distdir distuninstallcheck dvi dvi-am html html-am info \
+ info-am install install-am install-data install-data-am \
+ install-dvi install-dvi-am install-exec install-exec-am \
+ install-html install-html-am install-info install-info-am \
+ install-man install-pdf install-pdf-am install-ps \
+ install-ps-am install-strip installcheck installcheck-am \
+ installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
--- /dev/null
+ GNU GENERAL PUBLIC LICENSE
+ Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+ 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+ Preamble
+
+ The licenses for most software are designed to take away your
+freedom to share and change it. By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users. This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it. (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.) You can apply it to
+your programs, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+ To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+ For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have. You must make sure that they, too, receive or can get the
+source code. And you must show them these terms so they know their
+rights.
+
+ We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+ Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software. If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+ Finally, any free program is threatened constantly by software
+patents. We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary. To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+ The precise terms and conditions for copying, distribution and
+modification follow.
+\f
+ GNU GENERAL PUBLIC LICENSE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+ 0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License. The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language. (Hereinafter, translation is included without limitation in
+the term "modification".) Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope. The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+ 1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+ 2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+ a) You must cause the modified files to carry prominent notices
+ stating that you changed the files and the date of any change.
+
+ b) You must cause any work that you distribute or publish, that in
+ whole or in part contains or is derived from the Program or any
+ part thereof, to be licensed as a whole at no charge to all third
+ parties under the terms of this License.
+
+ c) If the modified program normally reads commands interactively
+ when run, you must cause it, when started running for such
+ interactive use in the most ordinary way, to print or display an
+ announcement including an appropriate copyright notice and a
+ notice that there is no warranty (or else, saying that you provide
+ a warranty) and that users may redistribute the program under
+ these conditions, and telling the user how to view a copy of this
+ License. (Exception: if the Program itself is interactive but
+ does not normally print such an announcement, your work based on
+ the Program is not required to print an announcement.)
+\f
+These requirements apply to the modified work as a whole. If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works. But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+ 3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+ a) Accompany it with the complete corresponding machine-readable
+ source code, which must be distributed under the terms of Sections
+ 1 and 2 above on a medium customarily used for software interchange; or,
+
+ b) Accompany it with a written offer, valid for at least three
+ years, to give any third party, for a charge no more than your
+ cost of physically performing source distribution, a complete
+ machine-readable copy of the corresponding source code, to be
+ distributed under the terms of Sections 1 and 2 above on a medium
+ customarily used for software interchange; or,
+
+ c) Accompany it with the information you received as to the offer
+ to distribute corresponding source code. (This alternative is
+ allowed only for noncommercial distribution and only if you
+ received the program in object code or executable form with such
+ an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it. For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable. However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+\f
+ 4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License. Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+ 5. You are not required to accept this License, since you have not
+signed it. However, nothing else grants you permission to modify or
+distribute the Program or its derivative works. These actions are
+prohibited by law if you do not accept this License. Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+ 6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions. You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+ 7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License. If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all. For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices. Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+\f
+ 8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded. In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+ 9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time. Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation. If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+ 10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission. For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this. Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+ NO WARRANTY
+
+ 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+ 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+ END OF TERMS AND CONDITIONS
+\f
+ How to Apply These Terms to Your New Programs
+
+ If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+ To do so, attach the following notices to the program. It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+ <one line to give the program's name and a brief idea of what it does.>
+ Copyright (C) <year> <name of author>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+ Gnomovision version 69, Copyright (C) year name of author
+ Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+ This is free software, and you are welcome to redistribute it
+ under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License. Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary. Here is a sample; alter the names:
+
+ Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+ `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+ <signature of Ty Coon>, 1 April 1989
+ Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs. If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library. If this is what you want to do, use the GNU Library General
+Public License instead of this License.
--- /dev/null
+BlueZ - Bluetooth protocol stack for Linux
+******************************************
+
+Copyright (C) 2000-2002 Maxim Krasnyansky <maxk@qualcomm.com>
+Copyright (C) 2003-2007 Marcel Holtmann <marcel@holtmann.org>
+
+Bluetooth packet analyzer
+
+
+Compilation and installation
+============================
+
+In order to compile Bluetooth analyzer you need following software packages:
+ - Linux Bluetooth protocol stack (BlueZ)
+ - GCC compiler
+
+To configure run:
+ ./configure --prefix=/usr --mandir=/usr/share/man
+
+Configure automatically searches for all required components and packages.
+
+To compile and install run:
+ make && make install
+
+
+Information
+===========
+
+Mailing lists:
+ bluez-users@lists.sf.net - BlueZ general questions and discussions
+ bluez-devel@lists.sf.net - BlueZ development
+
+For additional information about the project visit BlueZ web site:
+ http://www.bluez.org
--- /dev/null
+AC_DEFUN([AC_PROG_CC_PIE], [
+ AC_CACHE_CHECK([whether ${CC-cc} accepts -fPIE], ac_cv_prog_cc_pie, [
+ echo 'void f(){}' > conftest.c
+ if test -z "`${CC-cc} -fPIE -pie -c conftest.c 2>&1`"; then
+ ac_cv_prog_cc_pie=yes
+ else
+ ac_cv_prog_cc_pie=no
+ fi
+ rm -rf conftest*
+ ])
+])
+
+AC_DEFUN([AC_INIT_BLUEZ], [
+ AC_PREFIX_DEFAULT(/usr/local)
+
+ if (test "${CFLAGS}" = ""); then
+ CFLAGS="-Wall -O2"
+ fi
+
+ if (test "${prefix}" = "NONE"); then
+ dnl no prefix and no sysconfdir, so default to /etc
+ if (test "$sysconfdir" = '${prefix}/etc'); then
+ AC_SUBST([sysconfdir], ['/etc'])
+ fi
+
+ dnl no prefix and no mandir, so use ${prefix}/share/man as default
+ if (test "$mandir" = '${prefix}/man'); then
+ AC_SUBST([mandir], ['${prefix}/share/man'])
+ fi
+
+ prefix="${ac_default_prefix}"
+ fi
+
+ if (test "${libdir}" = '${exec_prefix}/lib'); then
+ libdir="${prefix}/lib"
+ fi
+
+ if (test "$sysconfdir" = '${prefix}/etc'); then
+ configdir="${prefix}/etc/bluetooth"
+ else
+ configdir="${sysconfdir}/bluetooth"
+ fi
+
+ AC_DEFINE_UNQUOTED(CONFIGDIR, "${configdir}", [Directory for the configuration files])
+])
+
+AC_DEFUN([AC_PATH_BLUEZ], [
+ PKG_CHECK_MODULES(BLUEZ, bluez, dummy=yes, AC_MSG_ERROR(Bluetooth library is required))
+ AC_SUBST(BLUEZ_CFLAGS)
+ AC_SUBST(BLUEZ_LIBS)
+])
+
+AC_DEFUN([AC_ARG_BLUEZ], [
+ fortify_enable=yes
+ debug_enable=no
+ pie_enable=no
+
+ AC_ARG_ENABLE(fortify, AC_HELP_STRING([--disable-fortify], [disable compile time buffer checks]), [
+ fortify_enable=${enableval}
+ ])
+
+ AC_ARG_ENABLE(debug, AC_HELP_STRING([--enable-debug], [enable compiling with debugging information]), [
+ debug_enable=${enableval}
+ ])
+
+ AC_ARG_ENABLE(pie, AC_HELP_STRING([--enable-pie], [enable position independent executables flag]), [
+ pie_enable=${enableval}
+ ])
+
+ if (test "${fortify_enable}" = "yes"); then
+ CFLAGS="$CFLAGS -D_FORTIFY_SOURCE=2"
+ fi
+
+ if (test "${debug_enable}" = "yes" && test "${ac_cv_prog_cc_g}" = "yes"); then
+ CFLAGS="$CFLAGS -g"
+ fi
+
+ if (test "${pie_enable}" = "yes" && test "${ac_cv_prog_cc_pie}" = "yes"); then
+ CFLAGS="$CFLAGS -fPIE"
+ LDFLAGS="$LDFLAGS -pie"
+ fi
+])
--- /dev/null
+# generated automatically by aclocal 1.10 -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006 Free Software Foundation, Inc.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+m4_if(m4_PACKAGE_VERSION, [2.61],,
+[m4_fatal([this file was generated for autoconf 2.61.
+You have another version of autoconf. If you want to use that,
+you should regenerate the build system entirely.], [63])])
+
+# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*-
+#
+# Copyright © 2004 Scott James Remnant <scott@netsplit.com>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# PKG_PROG_PKG_CONFIG([MIN-VERSION])
+# ----------------------------------
+AC_DEFUN([PKG_PROG_PKG_CONFIG],
+[m4_pattern_forbid([^_?PKG_[A-Z_]+$])
+m4_pattern_allow([^PKG_CONFIG(_PATH)?$])
+AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])dnl
+if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
+ AC_PATH_TOOL([PKG_CONFIG], [pkg-config])
+fi
+if test -n "$PKG_CONFIG"; then
+ _pkg_min_version=m4_default([$1], [0.9.0])
+ AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version])
+ if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ PKG_CONFIG=""
+ fi
+
+fi[]dnl
+])# PKG_PROG_PKG_CONFIG
+
+# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
+#
+# Check to see whether a particular set of modules exists. Similar
+# to PKG_CHECK_MODULES(), but does not set variables or print errors.
+#
+#
+# Similar to PKG_CHECK_MODULES, make sure that the first instance of
+# this or PKG_CHECK_MODULES is called, or make sure to call
+# PKG_CHECK_EXISTS manually
+# --------------------------------------------------------------
+AC_DEFUN([PKG_CHECK_EXISTS],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
+if test -n "$PKG_CONFIG" && \
+ AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then
+ m4_ifval([$2], [$2], [:])
+m4_ifvaln([$3], [else
+ $3])dnl
+fi])
+
+
+# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES])
+# ---------------------------------------------
+m4_define([_PKG_CONFIG],
+[if test -n "$PKG_CONFIG"; then
+ if test -n "$$1"; then
+ pkg_cv_[]$1="$$1"
+ else
+ PKG_CHECK_EXISTS([$3],
+ [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`],
+ [pkg_failed=yes])
+ fi
+else
+ pkg_failed=untried
+fi[]dnl
+])# _PKG_CONFIG
+
+# _PKG_SHORT_ERRORS_SUPPORTED
+# -----------------------------
+AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])
+if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
+ _pkg_short_errors_supported=yes
+else
+ _pkg_short_errors_supported=no
+fi[]dnl
+])# _PKG_SHORT_ERRORS_SUPPORTED
+
+
+# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
+# [ACTION-IF-NOT-FOUND])
+#
+#
+# Note that if there is a possibility the first call to
+# PKG_CHECK_MODULES might not happen, you should be sure to include an
+# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac
+#
+#
+# --------------------------------------------------------------
+AC_DEFUN([PKG_CHECK_MODULES],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
+AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl
+AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl
+
+pkg_failed=no
+AC_MSG_CHECKING([for $1])
+
+_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2])
+_PKG_CONFIG([$1][_LIBS], [libs], [$2])
+
+m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS
+and $1[]_LIBS to avoid the need to call pkg-config.
+See the pkg-config man page for more details.])
+
+if test $pkg_failed = yes; then
+ _PKG_SHORT_ERRORS_SUPPORTED
+ if test $_pkg_short_errors_supported = yes; then
+ $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "$2"`
+ else
+ $1[]_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$2"`
+ fi
+ # Put the nasty error message in config.log where it belongs
+ echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD
+
+ ifelse([$4], , [AC_MSG_ERROR(dnl
+[Package requirements ($2) were not met:
+
+$$1_PKG_ERRORS
+
+Consider adjusting the PKG_CONFIG_PATH environment variable if you
+installed software in a non-standard prefix.
+
+_PKG_TEXT
+])],
+ [AC_MSG_RESULT([no])
+ $4])
+elif test $pkg_failed = untried; then
+ ifelse([$4], , [AC_MSG_FAILURE(dnl
+[The pkg-config script could not be found or is too old. Make sure it
+is in your PATH or set the PKG_CONFIG environment variable to the full
+path to pkg-config.
+
+_PKG_TEXT
+
+To get pkg-config, see <http://pkg-config.freedesktop.org/>.])],
+ [$4])
+else
+ $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS
+ $1[]_LIBS=$pkg_cv_[]$1[]_LIBS
+ AC_MSG_RESULT([yes])
+ ifelse([$3], , :, [$3])
+fi[]dnl
+])# PKG_CHECK_MODULES
+
+# Copyright (C) 2002, 2003, 2005, 2006 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.10'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version. Point them to the right macro.
+m4_if([$1], [1.10], [],
+ [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too. Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
+# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+[AM_AUTOMAKE_VERSION([1.10])dnl
+_AM_AUTOCONF_VERSION(m4_PACKAGE_VERSION)])
+
+# AM_AUX_DIR_EXPAND -*- Autoconf -*-
+
+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
+# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory. The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run. This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+# fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+# fails if $ac_aux_dir is absolute,
+# fails when called from a subdirectory in a VPATH build with
+# a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir. In an in-source build this is usually
+# harmless because $srcdir is `.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
+# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+# MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH. The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[dnl Rely on autoconf to set up CDPATH properly.
+AC_PREREQ([2.50])dnl
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+])
+
+# AM_CONDITIONAL -*- Autoconf -*-
+
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 8
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ(2.52)dnl
+ ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
+ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
+if $2; then
+ $1_TRUE=
+ $1_FALSE='#'
+else
+ $1_TRUE='#'
+ $1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+ AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
+fi])])
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 9
+
+# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery. Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "GCJ", or "OBJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
+ [$1], CXX, [depcc="$CXX" am_compiler_list=],
+ [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+ [$1], UPC, [depcc="$UPC" am_compiler_list=],
+ [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
+ [depcc="$$1" am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+ [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named `D' -- because `-MD' means `put the output
+ # in D'.
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_$1_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+ fi
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+ # Solaris 8's {/usr,}/bin/sh.
+ touch sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ case $depmode in
+ nosideeffect)
+ # after this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ none) break ;;
+ esac
+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle `-M -o', and we need to detect this.
+ if depmode=$depmode \
+ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_$1_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES
+AC_DEFUN([AM_SET_DEPDIR],
+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE(dependency-tracking,
+[ --disable-dependency-tracking speeds up one-time build
+ --enable-dependency-tracking do not reject slow dependency extractors])
+if test "x$enable_dependency_tracking" != xno; then
+ am_depcomp="$ac_aux_dir/depcomp"
+ AMDEPBACKSLASH='\'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
+])
+
+# Generate code to set up dependency tracking. -*- Autoconf -*-
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+#serial 3
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[for mf in $CONFIG_FILES; do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named `Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # Grep'ing the whole file is not good either: AIX grep has a line
+ # limit of 2048, but all sed's we know have understand at least 4000.
+ if sed 10q "$mf" | grep '^#.*generated by automake' > /dev/null 2>&1; then
+ dirpart=`AS_DIRNAME("$mf")`
+ else
+ continue
+ fi
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running `make'.
+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+ # When using ansi2knr, U may be empty or an underscore; expand it
+ U=`sed -n 's/^U = //p' < "$mf"`
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`AS_DIRNAME(["$file"])`
+ AS_MKDIR_P([$dirpart/$fdir])
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
+done
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking
+# is enabled. FIXME. This creates each `.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+ [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+ [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+])
+
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 8
+
+# AM_CONFIG_HEADER is obsolete. It has been replaced by AC_CONFIG_HEADERS.
+AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)])
+
+# Do all the work for Automake. -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 12
+
+# This macro actually does too much. Some checks are only needed if
+# your package does certain things. But this isn't really a big deal.
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out. PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition. After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_PREREQ([2.60])dnl
+dnl Autoconf wants to disallow AM_ names. We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+ # is not polluted with repeated "-I."
+ AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+ # test to see if srcdir already configured
+ if test -f $srcdir/config.status; then
+ AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+ fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+ if (cygpath --version) >/dev/null 2>/dev/null; then
+ CYGPATH_W='cygpath -w'
+ else
+ CYGPATH_W=echo
+ fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
+ [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
+AM_MISSING_PROG(AUTOCONF, autoconf)
+AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
+AM_MISSING_PROG(AUTOHEADER, autoheader)
+AM_MISSING_PROG(MAKEINFO, makeinfo)
+AM_PROG_INSTALL_SH
+AM_PROG_INSTALL_STRIP
+AC_REQUIRE([AM_PROG_MKDIR_P])dnl
+# We need awk for the "check" target. The system "awk" is bad on
+# some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+ [_AM_PROG_TAR([v7])])])
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+ [_AM_DEPENDENCIES(CC)],
+ [define([AC_PROG_CC],
+ defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+ [_AM_DEPENDENCIES(CXX)],
+ [define([AC_PROG_CXX],
+ defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+ [_AM_DEPENDENCIES(OBJC)],
+ [define([AC_PROG_OBJC],
+ defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
+])
+])
+
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated. The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+ case $_am_header in
+ $1 | $1:* )
+ break ;;
+ * )
+ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+ esac
+done
+echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
+
+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
+AC_SUBST(install_sh)])
+
+# Copyright (C) 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# Check whether the underlying file-system supports filenames
+# with a leading dot. For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+ am__leading_dot=.
+else
+ am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+
+# Add --enable-maintainer-mode option to configure. -*- Autoconf -*-
+# From Jim Meyering
+
+# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+AC_DEFUN([AM_MAINTAINER_MODE],
+[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
+ dnl maintainer-mode is disabled by default
+ AC_ARG_ENABLE(maintainer-mode,
+[ --enable-maintainer-mode enable make rules and dependencies not useful
+ (and sometimes confusing) to the casual installer],
+ USE_MAINTAINER_MODE=$enableval,
+ USE_MAINTAINER_MODE=no)
+ AC_MSG_RESULT([$USE_MAINTAINER_MODE])
+ AM_CONDITIONAL(MAINTAINER_MODE, [test $USE_MAINTAINER_MODE = yes])
+ MAINT=$MAINTAINER_MODE_TRUE
+ AC_SUBST(MAINT)dnl
+]
+)
+
+AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])
+
+# Check to see how 'make' treats includes. -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 3
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+ @echo done
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# We grep out `Entering directory' and `Leaving directory'
+# messages which can occur if `w' ends up in MAKEFLAGS.
+# In particular we don't look at `^make:' because GNU make might
+# be invoked under some other name (usually "gmake"), in which
+# case it prints its new name instead of `make'.
+if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
+ am__include=include
+ am__quote=
+ _am_result=GNU
+fi
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+ echo '.include "confinc"' > confmf
+ if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ fi
+fi
+AC_SUBST([am__include])
+AC_SUBST([am__quote])
+AC_MSG_RESULT([$_am_result])
+rm -f confinc confmf
+])
+
+# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
+
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 5
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it supports --run.
+# If it does, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([missing])dnl
+test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+ am_missing_run="$MISSING --run "
+else
+ am_missing_run=
+ AC_MSG_WARN([`missing' script is too old or missing])
+fi
+])
+
+# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_MKDIR_P
+# ---------------
+# Check for `mkdir -p'.
+AC_DEFUN([AM_PROG_MKDIR_P],
+[AC_PREREQ([2.60])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P,
+dnl while keeping a definition of mkdir_p for backward compatibility.
+dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
+dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
+dnl Makefile.ins that do not define MKDIR_P, so we do our own
+dnl adjustment using top_builddir (which is defined more often than
+dnl MKDIR_P).
+AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
+case $mkdir_p in
+ [[\\/$]]* | ?:[[\\/]]*) ;;
+ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+])
+
+# Helper functions for option handling. -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 3
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# ------------------------------
+# Set option NAME. Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ----------------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+# Check to make sure that the build environment is sane. -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+ if test "$[*]" = "X"; then
+ # -L didn't work.
+ set X `ls -t $srcdir/configure conftest.file`
+ fi
+ rm -f conftest.file
+ if test "$[*]" != "X $srcdir/configure conftest.file" \
+ && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
+alias in your environment])
+ fi
+
+ test "$[2]" = conftest.file
+ )
+then
+ # Ok.
+ :
+else
+ AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT(yes)])
+
+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_STRIP
+# ---------------------
+# One issue with vendor `install' (even GNU) is that you can't
+# specify the program used to strip binaries. This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in `make install-strip', and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'. However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
+if test "$cross_compiling" != no; then
+ AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# Copyright (C) 2006 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputing VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
+
+# Check how to create a tarball. -*- Autoconf -*-
+
+# Copyright (C) 2004, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of `v7', `ustar', or `pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+# tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+# $(am__untar) < result.tar
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility.
+AM_MISSING_PROG([AMTAR], [tar])
+m4_if([$1], [v7],
+ [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
+ [m4_case([$1], [ustar],, [pax],,
+ [m4_fatal([Unknown tar format])])
+AC_MSG_CHECKING([how to create a $1 tar archive])
+# Loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+_am_tools=${am_cv_prog_tar_$1-$_am_tools}
+# Do not fold the above two line into one, because Tru64 sh and
+# Solaris sh will not grok spaces in the rhs of `-'.
+for _am_tool in $_am_tools
+do
+ case $_am_tool in
+ gnutar)
+ for _am_tar in tar gnutar gtar;
+ do
+ AM_RUN_LOG([$_am_tar --version]) && break
+ done
+ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+ am__untar="$_am_tar -xf -"
+ ;;
+ plaintar)
+ # Must skip GNU tar: if it does not support --format= it doesn't create
+ # ustar tarball either.
+ (tar --version) >/dev/null 2>&1 && continue
+ am__tar='tar chf - "$$tardir"'
+ am__tar_='tar chf - "$tardir"'
+ am__untar='tar xf -'
+ ;;
+ pax)
+ am__tar='pax -L -x $1 -w "$$tardir"'
+ am__tar_='pax -L -x $1 -w "$tardir"'
+ am__untar='pax -r'
+ ;;
+ cpio)
+ am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+ am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+ am__untar='cpio -i -H $1 -d'
+ ;;
+ none)
+ am__tar=false
+ am__tar_=false
+ am__untar=false
+ ;;
+ esac
+
+ # If the value was cached, stop now. We just wanted to have am__tar
+ # and am__untar set.
+ test -n "${am_cv_prog_tar_$1}" && break
+
+ # tar/untar a dummy directory, and stop if the command works
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ echo GrepMe > conftest.dir/file
+ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+ rm -rf conftest.dir
+ if test -s conftest.tar; then
+ AM_RUN_LOG([$am__untar <conftest.tar])
+ grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+ fi
+done
+rm -rf conftest.dir
+
+AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
+m4_include([acinclude.m4])
--- /dev/null
+/* config.h.in. Generated from configure.in by autoheader. */
+
+/* Directory for the configuration files */
+#undef CONFIGDIR
+
+/* Name of package */
+#undef PACKAGE
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* Version number of package */
+#undef VERSION
--- /dev/null
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.61.
+#
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## --------------------- ##
+## M4sh Initialization. ##
+## --------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in
+ *posix*) set -o posix ;;
+esac
+
+fi
+
+
+
+
+# PATH needs CR
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+
+# Support unset when possible.
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ as_unset=unset
+else
+ as_unset=false
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+as_nl='
+'
+IFS=" "" $as_nl"
+
+# Find who we are. Look in the path if we contain no directory separator.
+case $0 in
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+IFS=$as_save_IFS
+
+ ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+ as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ { (exit 1); exit 1; }
+fi
+
+# Work around bugs in pre-3.0 UWIN ksh.
+for as_var in ENV MAIL MAILPATH
+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+for as_var in \
+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+ LC_TELEPHONE LC_TIME
+do
+ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
+ eval $as_var=C; export $as_var
+ else
+ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+ fi
+done
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+
+# Name of the executable.
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+
+# CDPATH.
+$as_unset CDPATH
+
+
+if test "x$CONFIG_SHELL" = x; then
+ if (eval ":") 2>/dev/null; then
+ as_have_required=yes
+else
+ as_have_required=no
+fi
+
+ if test $as_have_required = yes && (eval ":
+(as_func_return () {
+ (exit \$1)
+}
+as_func_success () {
+ as_func_return 0
+}
+as_func_failure () {
+ as_func_return 1
+}
+as_func_ret_success () {
+ return 0
+}
+as_func_ret_failure () {
+ return 1
+}
+
+exitcode=0
+if as_func_success; then
+ :
+else
+ exitcode=1
+ echo as_func_success failed.
+fi
+
+if as_func_failure; then
+ exitcode=1
+ echo as_func_failure succeeded.
+fi
+
+if as_func_ret_success; then
+ :
+else
+ exitcode=1
+ echo as_func_ret_success failed.
+fi
+
+if as_func_ret_failure; then
+ exitcode=1
+ echo as_func_ret_failure succeeded.
+fi
+
+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
+ :
+else
+ exitcode=1
+ echo positional parameters were not saved.
+fi
+
+test \$exitcode = 0) || { (exit 1); exit 1; }
+
+(
+ as_lineno_1=\$LINENO
+ as_lineno_2=\$LINENO
+ test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&
+ test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; }
+") 2> /dev/null; then
+ :
+else
+ as_candidate_shells=
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ case $as_dir in
+ /*)
+ for as_base in sh bash ksh sh5; do
+ as_candidate_shells="$as_candidate_shells $as_dir/$as_base"
+ done;;
+ esac
+done
+IFS=$as_save_IFS
+
+
+ for as_shell in $as_candidate_shells $SHELL; do
+ # Try only shells that exist, to save several forks.
+ if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+ { ("$as_shell") 2> /dev/null <<\_ASEOF
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in
+ *posix*) set -o posix ;;
+esac
+
+fi
+
+
+:
+_ASEOF
+}; then
+ CONFIG_SHELL=$as_shell
+ as_have_required=yes
+ if { "$as_shell" 2> /dev/null <<\_ASEOF
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in
+ *posix*) set -o posix ;;
+esac
+
+fi
+
+
+:
+(as_func_return () {
+ (exit $1)
+}
+as_func_success () {
+ as_func_return 0
+}
+as_func_failure () {
+ as_func_return 1
+}
+as_func_ret_success () {
+ return 0
+}
+as_func_ret_failure () {
+ return 1
+}
+
+exitcode=0
+if as_func_success; then
+ :
+else
+ exitcode=1
+ echo as_func_success failed.
+fi
+
+if as_func_failure; then
+ exitcode=1
+ echo as_func_failure succeeded.
+fi
+
+if as_func_ret_success; then
+ :
+else
+ exitcode=1
+ echo as_func_ret_success failed.
+fi
+
+if as_func_ret_failure; then
+ exitcode=1
+ echo as_func_ret_failure succeeded.
+fi
+
+if ( set x; as_func_ret_success y && test x = "$1" ); then
+ :
+else
+ exitcode=1
+ echo positional parameters were not saved.
+fi
+
+test $exitcode = 0) || { (exit 1); exit 1; }
+
+(
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }
+
+_ASEOF
+}; then
+ break
+fi
+
+fi
+
+ done
+
+ if test "x$CONFIG_SHELL" != x; then
+ for as_var in BASH_ENV ENV
+ do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+ done
+ export CONFIG_SHELL
+ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
+fi
+
+
+ if test $as_have_required = no; then
+ echo This script requires a shell more modern than all the
+ echo shells that I found on your system. Please install a
+ echo modern shell, or manually run the script under such a
+ echo shell if you do have one.
+ { (exit 1); exit 1; }
+fi
+
+
+fi
+
+fi
+
+
+
+(eval "as_func_return () {
+ (exit \$1)
+}
+as_func_success () {
+ as_func_return 0
+}
+as_func_failure () {
+ as_func_return 1
+}
+as_func_ret_success () {
+ return 0
+}
+as_func_ret_failure () {
+ return 1
+}
+
+exitcode=0
+if as_func_success; then
+ :
+else
+ exitcode=1
+ echo as_func_success failed.
+fi
+
+if as_func_failure; then
+ exitcode=1
+ echo as_func_failure succeeded.
+fi
+
+if as_func_ret_success; then
+ :
+else
+ exitcode=1
+ echo as_func_ret_success failed.
+fi
+
+if as_func_ret_failure; then
+ exitcode=1
+ echo as_func_ret_failure succeeded.
+fi
+
+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
+ :
+else
+ exitcode=1
+ echo positional parameters were not saved.
+fi
+
+test \$exitcode = 0") || {
+ echo No shell found that supports shell functions.
+ echo Please tell autoconf@gnu.org about your system,
+ echo including any error possibly output before this
+ echo message
+}
+
+
+
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
+
+ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
+ # uniformly replaced by the line number. The first 'sed' inserts a
+ # line-number line after each line using $LINENO; the second 'sed'
+ # does the real work. The second script uses 'N' to pair each
+ # line-number line with the line containing $LINENO, and appends
+ # trailing '-' during substitution so that $LINENO is not a special
+ # case at line end.
+ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
+ # scripts with optimization help from Paolo Bonzini. Blame Lee
+ # E. McMahon (1931-1989) for sed's syntax. :-)
+ sed -n '
+ p
+ /[$]LINENO/=
+ ' <$as_myself |
+ sed '
+ s/[$]LINENO.*/&-/
+ t lineno
+ b
+ :lineno
+ N
+ :loop
+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+ t loop
+ s/-\n.*//
+ ' >$as_me.lineno &&
+ chmod +x "$as_me.lineno" ||
+ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+ { (exit 1); exit 1; }; }
+
+ # Don't try to exec as it changes $[0], causing all sort of problems
+ # (the dirname of $[0] is not the place where we might find the
+ # original and so on. Autoconf is especially sensitive to this).
+ . "./$as_me.lineno"
+ # Exit status is that of the last command.
+ exit
+}
+
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in
+-n*)
+ case `echo 'x\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+ *) ECHO_C='\c';;
+ esac;;
+*)
+ ECHO_N='-n';;
+esac
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+else
+ rm -f conf$$.dir
+ mkdir conf$$.dir
+fi
+echo >conf$$.file
+if ln -s conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -p'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ as_ln_s='cp -p'
+elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+else
+ as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p=:
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+ as_test_x='test -x'
+else
+ if ls -dL / >/dev/null 2>&1; then
+ as_ls_L_option=L
+ else
+ as_ls_L_option=
+ fi
+ as_test_x='
+ eval sh -c '\''
+ if test -d "$1"; then
+ test -d "$1/.";
+ else
+ case $1 in
+ -*)set "./$1";;
+ esac;
+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
+ ???[sx]*):;;*)false;;esac;fi
+ '\'' sh
+ '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+
+exec 7<&0 </dev/null 6>&1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+# Identity of this package.
+PACKAGE_NAME=
+PACKAGE_TARNAME=
+PACKAGE_VERSION=
+PACKAGE_STRING=
+PACKAGE_BUGREPORT=
+
+ac_default_prefix=/usr/local
+ac_subst_vars='SHELL
+PATH_SEPARATOR
+PACKAGE_NAME
+PACKAGE_TARNAME
+PACKAGE_VERSION
+PACKAGE_STRING
+PACKAGE_BUGREPORT
+exec_prefix
+prefix
+program_transform_name
+bindir
+sbindir
+libexecdir
+datarootdir
+datadir
+sysconfdir
+sharedstatedir
+localstatedir
+includedir
+oldincludedir
+docdir
+infodir
+htmldir
+dvidir
+pdfdir
+psdir
+libdir
+localedir
+mandir
+DEFS
+ECHO_C
+ECHO_N
+ECHO_T
+LIBS
+build_alias
+host_alias
+target_alias
+INSTALL_PROGRAM
+INSTALL_SCRIPT
+INSTALL_DATA
+am__isrc
+CYGPATH_W
+PACKAGE
+VERSION
+ACLOCAL
+AUTOCONF
+AUTOMAKE
+AUTOHEADER
+MAKEINFO
+install_sh
+STRIP
+INSTALL_STRIP_PROGRAM
+mkdir_p
+AWK
+SET_MAKE
+am__leading_dot
+AMTAR
+am__tar
+am__untar
+MAINTAINER_MODE_TRUE
+MAINTAINER_MODE_FALSE
+MAINT
+CC
+CFLAGS
+LDFLAGS
+CPPFLAGS
+ac_ct_CC
+EXEEXT
+OBJEXT
+DEPDIR
+am__include
+am__quote
+AMDEP_TRUE
+AMDEP_FALSE
+AMDEPBACKSLASH
+CCDEPMODE
+am__fastdepCC_TRUE
+am__fastdepCC_FALSE
+RANLIB
+PKG_CONFIG
+BLUEZ_CFLAGS
+BLUEZ_LIBS
+LIBOBJS
+LTLIBOBJS'
+ac_subst_files=''
+ ac_precious_vars='build_alias
+host_alias
+target_alias
+CC
+CFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
+PKG_CONFIG
+BLUEZ_CFLAGS
+BLUEZ_LIBS'
+
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+docdir='${datarootdir}/doc/${PACKAGE}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
+
+ac_prev=
+ac_dashdash=
+for ac_option
+do
+ # If the previous option needs an argument, assign it.
+ if test -n "$ac_prev"; then
+ eval $ac_prev=\$ac_option
+ ac_prev=
+ continue
+ fi
+
+ case $ac_option in
+ *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+ *) ac_optarg=yes ;;
+ esac
+
+ # Accept the important Cygnus configure options, so we can diagnose typos.
+
+ case $ac_dashdash$ac_option in
+ --)
+ ac_dashdash=yes ;;
+
+ -bindir | --bindir | --bindi | --bind | --bin | --bi)
+ ac_prev=bindir ;;
+ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+ bindir=$ac_optarg ;;
+
+ -build | --build | --buil | --bui | --bu)
+ ac_prev=build_alias ;;
+ -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+ build_alias=$ac_optarg ;;
+
+ -cache-file | --cache-file | --cache-fil | --cache-fi \
+ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+ ac_prev=cache_file ;;
+ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+ cache_file=$ac_optarg ;;
+
+ --config-cache | -C)
+ cache_file=config.cache ;;
+
+ -datadir | --datadir | --datadi | --datad)
+ ac_prev=datadir ;;
+ -datadir=* | --datadir=* | --datadi=* | --datad=*)
+ datadir=$ac_optarg ;;
+
+ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+ | --dataroo | --dataro | --datar)
+ ac_prev=datarootdir ;;
+ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+ datarootdir=$ac_optarg ;;
+
+ -disable-* | --disable-*)
+ ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+ { (exit 1); exit 1; }; }
+ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
+ eval enable_$ac_feature=no ;;
+
+ -docdir | --docdir | --docdi | --doc | --do)
+ ac_prev=docdir ;;
+ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+ docdir=$ac_optarg ;;
+
+ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+ ac_prev=dvidir ;;
+ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+ dvidir=$ac_optarg ;;
+
+ -enable-* | --enable-*)
+ ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+ { (exit 1); exit 1; }; }
+ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
+ eval enable_$ac_feature=\$ac_optarg ;;
+
+ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+ | --exec | --exe | --ex)
+ ac_prev=exec_prefix ;;
+ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+ | --exec=* | --exe=* | --ex=*)
+ exec_prefix=$ac_optarg ;;
+
+ -gas | --gas | --ga | --g)
+ # Obsolete; use --with-gas.
+ with_gas=yes ;;
+
+ -help | --help | --hel | --he | -h)
+ ac_init_help=long ;;
+ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+ ac_init_help=recursive ;;
+ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+ ac_init_help=short ;;
+
+ -host | --host | --hos | --ho)
+ ac_prev=host_alias ;;
+ -host=* | --host=* | --hos=* | --ho=*)
+ host_alias=$ac_optarg ;;
+
+ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+ ac_prev=htmldir ;;
+ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+ | --ht=*)
+ htmldir=$ac_optarg ;;
+
+ -includedir | --includedir | --includedi | --included | --include \
+ | --includ | --inclu | --incl | --inc)
+ ac_prev=includedir ;;
+ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+ | --includ=* | --inclu=* | --incl=* | --inc=*)
+ includedir=$ac_optarg ;;
+
+ -infodir | --infodir | --infodi | --infod | --info | --inf)
+ ac_prev=infodir ;;
+ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+ infodir=$ac_optarg ;;
+
+ -libdir | --libdir | --libdi | --libd)
+ ac_prev=libdir ;;
+ -libdir=* | --libdir=* | --libdi=* | --libd=*)
+ libdir=$ac_optarg ;;
+
+ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+ | --libexe | --libex | --libe)
+ ac_prev=libexecdir ;;
+ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+ | --libexe=* | --libex=* | --libe=*)
+ libexecdir=$ac_optarg ;;
+
+ -localedir | --localedir | --localedi | --localed | --locale)
+ ac_prev=localedir ;;
+ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+ localedir=$ac_optarg ;;
+
+ -localstatedir | --localstatedir | --localstatedi | --localstated \
+ | --localstate | --localstat | --localsta | --localst | --locals)
+ ac_prev=localstatedir ;;
+ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+ localstatedir=$ac_optarg ;;
+
+ -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+ ac_prev=mandir ;;
+ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+ mandir=$ac_optarg ;;
+
+ -nfp | --nfp | --nf)
+ # Obsolete; use --without-fp.
+ with_fp=no ;;
+
+ -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+ | --no-cr | --no-c | -n)
+ no_create=yes ;;
+
+ -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+ no_recursion=yes ;;
+
+ -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+ | --oldin | --oldi | --old | --ol | --o)
+ ac_prev=oldincludedir ;;
+ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+ oldincludedir=$ac_optarg ;;
+
+ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+ ac_prev=prefix ;;
+ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+ prefix=$ac_optarg ;;
+
+ -program-prefix | --program-prefix | --program-prefi | --program-pref \
+ | --program-pre | --program-pr | --program-p)
+ ac_prev=program_prefix ;;
+ -program-prefix=* | --program-prefix=* | --program-prefi=* \
+ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+ program_prefix=$ac_optarg ;;
+
+ -program-suffix | --program-suffix | --program-suffi | --program-suff \
+ | --program-suf | --program-su | --program-s)
+ ac_prev=program_suffix ;;
+ -program-suffix=* | --program-suffix=* | --program-suffi=* \
+ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+ program_suffix=$ac_optarg ;;
+
+ -program-transform-name | --program-transform-name \
+ | --program-transform-nam | --program-transform-na \
+ | --program-transform-n | --program-transform- \
+ | --program-transform | --program-transfor \
+ | --program-transfo | --program-transf \
+ | --program-trans | --program-tran \
+ | --progr-tra | --program-tr | --program-t)
+ ac_prev=program_transform_name ;;
+ -program-transform-name=* | --program-transform-name=* \
+ | --program-transform-nam=* | --program-transform-na=* \
+ | --program-transform-n=* | --program-transform-=* \
+ | --program-transform=* | --program-transfor=* \
+ | --program-transfo=* | --program-transf=* \
+ | --program-trans=* | --program-tran=* \
+ | --progr-tra=* | --program-tr=* | --program-t=*)
+ program_transform_name=$ac_optarg ;;
+
+ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+ ac_prev=pdfdir ;;
+ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+ pdfdir=$ac_optarg ;;
+
+ -psdir | --psdir | --psdi | --psd | --ps)
+ ac_prev=psdir ;;
+ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+ psdir=$ac_optarg ;;
+
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ silent=yes ;;
+
+ -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+ ac_prev=sbindir ;;
+ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+ | --sbi=* | --sb=*)
+ sbindir=$ac_optarg ;;
+
+ -sharedstatedir | --sharedstatedir | --sharedstatedi \
+ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+ | --sharedst | --shareds | --shared | --share | --shar \
+ | --sha | --sh)
+ ac_prev=sharedstatedir ;;
+ -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+ | --sha=* | --sh=*)
+ sharedstatedir=$ac_optarg ;;
+
+ -site | --site | --sit)
+ ac_prev=site ;;
+ -site=* | --site=* | --sit=*)
+ site=$ac_optarg ;;
+
+ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+ ac_prev=srcdir ;;
+ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+ srcdir=$ac_optarg ;;
+
+ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+ | --syscon | --sysco | --sysc | --sys | --sy)
+ ac_prev=sysconfdir ;;
+ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+ sysconfdir=$ac_optarg ;;
+
+ -target | --target | --targe | --targ | --tar | --ta | --t)
+ ac_prev=target_alias ;;
+ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+ target_alias=$ac_optarg ;;
+
+ -v | -verbose | --verbose | --verbos | --verbo | --verb)
+ verbose=yes ;;
+
+ -version | --version | --versio | --versi | --vers | -V)
+ ac_init_version=: ;;
+
+ -with-* | --with-*)
+ ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid package name: $ac_package" >&2
+ { (exit 1); exit 1; }; }
+ ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
+ eval with_$ac_package=\$ac_optarg ;;
+
+ -without-* | --without-*)
+ ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid package name: $ac_package" >&2
+ { (exit 1); exit 1; }; }
+ ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
+ eval with_$ac_package=no ;;
+
+ --x)
+ # Obsolete; use --with-x.
+ with_x=yes ;;
+
+ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+ | --x-incl | --x-inc | --x-in | --x-i)
+ ac_prev=x_includes ;;
+ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+ x_includes=$ac_optarg ;;
+
+ -x-libraries | --x-libraries | --x-librarie | --x-librari \
+ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+ ac_prev=x_libraries ;;
+ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+ x_libraries=$ac_optarg ;;
+
+ -*) { echo "$as_me: error: unrecognized option: $ac_option
+Try \`$0 --help' for more information." >&2
+ { (exit 1); exit 1; }; }
+ ;;
+
+ *=*)
+ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
+ { (exit 1); exit 1; }; }
+ eval $ac_envvar=\$ac_optarg
+ export $ac_envvar ;;
+
+ *)
+ # FIXME: should be removed in autoconf 3.0.
+ echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+ : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
+ ;;
+
+ esac
+done
+
+if test -n "$ac_prev"; then
+ ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+ { echo "$as_me: error: missing argument to $ac_option" >&2
+ { (exit 1); exit 1; }; }
+fi
+
+# Be sure to have absolute directory names.
+for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
+ datadir sysconfdir sharedstatedir localstatedir includedir \
+ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+ libdir localedir mandir
+do
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ [\\/$]* | ?:[\\/]* ) continue;;
+ NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+ esac
+ { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+ { (exit 1); exit 1; }; }
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+ if test "x$build_alias" = x; then
+ cross_compiling=maybe
+ echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
+ If a cross compiler is detected then cross compile mode will be used." >&2
+ elif test "x$build_alias" != "x$host_alias"; then
+ cross_compiling=yes
+ fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+ { echo "$as_me: error: Working directory cannot be determined" >&2
+ { (exit 1); exit 1; }; }
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+ { echo "$as_me: error: pwd does not report name of working directory" >&2
+ { (exit 1); exit 1; }; }
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+ ac_srcdir_defaulted=yes
+ # Try the directory containing this script, then the parent directory.
+ ac_confdir=`$as_dirname -- "$0" ||
+$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$0" : 'X\(//\)[^/]' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+echo X"$0" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ srcdir=$ac_confdir
+ if test ! -r "$srcdir/$ac_unique_file"; then
+ srcdir=..
+ fi
+else
+ ac_srcdir_defaulted=no
+fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
+ { (exit 1); exit 1; }; }
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+ cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2
+ { (exit 1); exit 1; }; }
+ pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+ srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+ eval ac_env_${ac_var}_set=\${${ac_var}+set}
+ eval ac_env_${ac_var}_value=\$${ac_var}
+ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+ eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+ # Omit some internal or obsolete options to make the list less imposing.
+ # This message is too long to be a string in the A/UX 3.1 sh.
+ cat <<_ACEOF
+\`configure' configures this package to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE. See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+ -h, --help display this help and exit
+ --help=short display options specific to this package
+ --help=recursive display the short help of all the included packages
+ -V, --version display version information and exit
+ -q, --quiet, --silent do not print \`checking...' messages
+ --cache-file=FILE cache test results in FILE [disabled]
+ -C, --config-cache alias for \`--cache-file=config.cache'
+ -n, --no-create do not create output files
+ --srcdir=DIR find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+ --prefix=PREFIX install architecture-independent files in PREFIX
+ [$ac_default_prefix]
+ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
+ [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+ --bindir=DIR user executables [EPREFIX/bin]
+ --sbindir=DIR system admin executables [EPREFIX/sbin]
+ --libexecdir=DIR program executables [EPREFIX/libexec]
+ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
+ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
+ --localstatedir=DIR modifiable single-machine data [PREFIX/var]
+ --libdir=DIR object code libraries [EPREFIX/lib]
+ --includedir=DIR C header files [PREFIX/include]
+ --oldincludedir=DIR C header files for non-gcc [/usr/include]
+ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
+ --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
+ --infodir=DIR info documentation [DATAROOTDIR/info]
+ --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
+ --mandir=DIR man documentation [DATAROOTDIR/man]
+ --docdir=DIR documentation root [DATAROOTDIR/doc/PACKAGE]
+ --htmldir=DIR html documentation [DOCDIR]
+ --dvidir=DIR dvi documentation [DOCDIR]
+ --pdfdir=DIR pdf documentation [DOCDIR]
+ --psdir=DIR ps documentation [DOCDIR]
+_ACEOF
+
+ cat <<\_ACEOF
+
+Program names:
+ --program-prefix=PREFIX prepend PREFIX to installed program names
+ --program-suffix=SUFFIX append SUFFIX to installed program names
+ --program-transform-name=PROGRAM run sed PROGRAM on installed program names
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+
+ cat <<\_ACEOF
+
+Optional Features:
+ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
+ --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
+ --enable-maintainer-mode enable make rules and dependencies not useful
+ (and sometimes confusing) to the casual installer
+ --disable-dependency-tracking speeds up one-time build
+ --enable-dependency-tracking do not reject slow dependency extractors
+ --disable-fortify disable compile time buffer checks
+ --enable-debug enable compiling with debugging information
+ --enable-pie enable position independent executables flag
+
+Some influential environment variables:
+ CC C compiler command
+ CFLAGS C compiler flags
+ LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
+ nonstandard directory <lib dir>
+ LIBS libraries to pass to the linker, e.g. -l<library>
+ CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I<include dir> if
+ you have headers in a nonstandard directory <include dir>
+ PKG_CONFIG path to pkg-config utility
+ BLUEZ_CFLAGS
+ C compiler flags for BLUEZ, overriding pkg-config
+ BLUEZ_LIBS linker flags for BLUEZ, overriding pkg-config
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+ # If there are subdirs, report their specific --help.
+ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+ test -d "$ac_dir" || continue
+ ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+ # A ".." for each directory in $ac_dir_suffix.
+ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+ esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+ .) # We are building in place.
+ ac_srcdir=.
+ ac_top_srcdir=$ac_top_builddir_sub
+ ac_abs_top_srcdir=$ac_pwd ;;
+ [\\/]* | ?:[\\/]* ) # Absolute name.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir
+ ac_abs_top_srcdir=$srcdir ;;
+ *) # Relative name.
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_build_prefix$srcdir
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+ cd "$ac_dir" || { ac_status=$?; continue; }
+ # Check for guested configure.
+ if test -f "$ac_srcdir/configure.gnu"; then
+ echo &&
+ $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+ elif test -f "$ac_srcdir/configure"; then
+ echo &&
+ $SHELL "$ac_srcdir/configure" --help=recursive
+ else
+ echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+ fi || ac_status=$?
+ cd "$ac_pwd" || { ac_status=$?; break; }
+ done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+ cat <<\_ACEOF
+configure
+generated by GNU Autoconf 2.61
+
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+ exit
+fi
+cat >config.log <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by $as_me, which was
+generated by GNU Autoconf 2.61. Invocation command line was
+
+ $ $0 $@
+
+_ACEOF
+exec 5>>config.log
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
+
+/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
+/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
+/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ echo "PATH: $as_dir"
+done
+IFS=$as_save_IFS
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+ for ac_arg
+ do
+ case $ac_arg in
+ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ continue ;;
+ *\'*)
+ ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ case $ac_pass in
+ 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
+ 2)
+ ac_configure_args1="$ac_configure_args1 '$ac_arg'"
+ if test $ac_must_keep_next = true; then
+ ac_must_keep_next=false # Got value, back to normal.
+ else
+ case $ac_arg in
+ *=* | --config-cache | -C | -disable-* | --disable-* \
+ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+ | -with-* | --with-* | -without-* | --without-* | --x)
+ case "$ac_configure_args0 " in
+ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+ esac
+ ;;
+ -* ) ac_must_keep_next=true ;;
+ esac
+ fi
+ ac_configure_args="$ac_configure_args '$ac_arg'"
+ ;;
+ esac
+ done
+done
+$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
+$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log. We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+trap 'exit_status=$?
+ # Save into config.log some information that might help in debugging.
+ {
+ echo
+
+ cat <<\_ASBOX
+## ---------------- ##
+## Cache variables. ##
+## ---------------- ##
+_ASBOX
+ echo
+ # The following way of writing the cache mishandles newlines in values,
+(
+ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+ eval ac_val=\$$ac_var
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+ *) $as_unset $ac_var ;;
+ esac ;;
+ esac
+ done
+ (set) 2>&1 |
+ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+ *${as_nl}ac_space=\ *)
+ sed -n \
+ "s/'\''/'\''\\\\'\'''\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+ ;; #(
+ *)
+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+ ;;
+ esac |
+ sort
+)
+ echo
+
+ cat <<\_ASBOX
+## ----------------- ##
+## Output variables. ##
+## ----------------- ##
+_ASBOX
+ echo
+ for ac_var in $ac_subst_vars
+ do
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+ echo "$ac_var='\''$ac_val'\''"
+ done | sort
+ echo
+
+ if test -n "$ac_subst_files"; then
+ cat <<\_ASBOX
+## ------------------- ##
+## File substitutions. ##
+## ------------------- ##
+_ASBOX
+ echo
+ for ac_var in $ac_subst_files
+ do
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+ echo "$ac_var='\''$ac_val'\''"
+ done | sort
+ echo
+ fi
+
+ if test -s confdefs.h; then
+ cat <<\_ASBOX
+## ----------- ##
+## confdefs.h. ##
+## ----------- ##
+_ASBOX
+ echo
+ cat confdefs.h
+ echo
+ fi
+ test "$ac_signal" != 0 &&
+ echo "$as_me: caught signal $ac_signal"
+ echo "$as_me: exit $exit_status"
+ } >&5
+ rm -f core *.core core.conftest.* &&
+ rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+ exit $exit_status
+' 0
+for ac_signal in 1 2 13 15; do
+ trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -f -r conftest* confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer explicitly selected file to automatically selected ones.
+if test -n "$CONFIG_SITE"; then
+ set x "$CONFIG_SITE"
+elif test "x$prefix" != xNONE; then
+ set x "$prefix/share/config.site" "$prefix/etc/config.site"
+else
+ set x "$ac_default_prefix/share/config.site" \
+ "$ac_default_prefix/etc/config.site"
+fi
+shift
+for ac_site_file
+do
+ if test -r "$ac_site_file"; then
+ { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
+echo "$as_me: loading site script $ac_site_file" >&6;}
+ sed 's/^/| /' "$ac_site_file" >&5
+ . "$ac_site_file"
+ fi
+done
+
+if test -r "$cache_file"; then
+ # Some versions of bash will fail to source /dev/null (special
+ # files actually), so we avoid doing that.
+ if test -f "$cache_file"; then
+ { echo "$as_me:$LINENO: loading cache $cache_file" >&5
+echo "$as_me: loading cache $cache_file" >&6;}
+ case $cache_file in
+ [\\/]* | ?:[\\/]* ) . "$cache_file";;
+ *) . "./$cache_file";;
+ esac
+ fi
+else
+ { echo "$as_me:$LINENO: creating cache $cache_file" >&5
+echo "$as_me: creating cache $cache_file" >&6;}
+ >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in $ac_precious_vars; do
+ eval ac_old_set=\$ac_cv_env_${ac_var}_set
+ eval ac_new_set=\$ac_env_${ac_var}_set
+ eval ac_old_val=\$ac_cv_env_${ac_var}_value
+ eval ac_new_val=\$ac_env_${ac_var}_value
+ case $ac_old_set,$ac_new_set in
+ set,)
+ { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,set)
+ { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
+echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,);;
+ *)
+ if test "x$ac_old_val" != "x$ac_new_val"; then
+ { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
+echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+ { echo "$as_me:$LINENO: former value: $ac_old_val" >&5
+echo "$as_me: former value: $ac_old_val" >&2;}
+ { echo "$as_me:$LINENO: current value: $ac_new_val" >&5
+echo "$as_me: current value: $ac_new_val" >&2;}
+ ac_cache_corrupted=:
+ fi;;
+ esac
+ # Pass precious variables to config.status.
+ if test "$ac_new_set" = set; then
+ case $ac_new_val in
+ *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+ *) ac_arg=$ac_var=$ac_new_val ;;
+ esac
+ case " $ac_configure_args " in
+ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
+ *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+ esac
+ fi
+done
+if $ac_cache_corrupted; then
+ { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
+echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+ { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
+echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+am__api_version='1.10'
+
+ac_aux_dir=
+for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
+ if test -f "$ac_dir/install-sh"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f "$ac_dir/install.sh"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ elif test -f "$ac_dir/shtool"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/shtool install -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5
+echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
+
+
+# Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
+if test -z "$INSTALL"; then
+if test "${ac_cv_path_install+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in
+ ./ | .// | /cC/* | \
+ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
+ /usr/ucb/* ) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
+ if test $ac_prog = install &&
+ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ :
+ elif test $ac_prog = install &&
+ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # program-specific install script used by HP pwplus--don't use.
+ :
+ else
+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+ break 3
+ fi
+ fi
+ done
+ done
+ ;;
+esac
+done
+IFS=$as_save_IFS
+
+
+fi
+ if test "${ac_cv_path_install+set}" = set; then
+ INSTALL=$ac_cv_path_install
+ else
+ # As a last resort, use the slow shell script. Don't cache a
+ # value for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the value is a relative name.
+ INSTALL=$ac_install_sh
+ fi
+fi
+{ echo "$as_me:$LINENO: result: $INSTALL" >&5
+echo "${ECHO_T}$INSTALL" >&6; }
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5
+echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; }
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+ if test "$*" = "X"; then
+ # -L didn't work.
+ set X `ls -t $srcdir/configure conftest.file`
+ fi
+ rm -f conftest.file
+ if test "$*" != "X $srcdir/configure conftest.file" \
+ && test "$*" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken
+alias in your environment" >&5
+echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken
+alias in your environment" >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+
+ test "$2" = conftest.file
+ )
+then
+ # Ok.
+ :
+else
+ { { echo "$as_me:$LINENO: error: newly created file is older than distributed files!
+Check your system clock" >&5
+echo "$as_me: error: newly created file is older than distributed files!
+Check your system clock" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+{ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
+test "$program_prefix" != NONE &&
+ program_transform_name="s&^&$program_prefix&;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+ program_transform_name="s&\$&$program_suffix&;$program_transform_name"
+# Double any \ or $. echo might interpret backslashes.
+# By default was `s,x,x', remove it if useless.
+cat <<\_ACEOF >conftest.sed
+s/[\\$]/&&/g;s/;s,x,x,$//
+_ACEOF
+program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
+rm -f conftest.sed
+
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+
+test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+ am_missing_run="$MISSING --run "
+else
+ am_missing_run=
+ { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
+echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+fi
+
+{ echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5
+echo $ECHO_N "checking for a thread-safe mkdir -p... $ECHO_C" >&6; }
+if test -z "$MKDIR_P"; then
+ if test "${ac_cv_path_mkdir+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in mkdir gmkdir; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
+ case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
+ 'mkdir (GNU coreutils) '* | \
+ 'mkdir (coreutils) '* | \
+ 'mkdir (fileutils) '4.1*)
+ ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
+ break 3;;
+ esac
+ done
+ done
+done
+IFS=$as_save_IFS
+
+fi
+
+ if test "${ac_cv_path_mkdir+set}" = set; then
+ MKDIR_P="$ac_cv_path_mkdir -p"
+ else
+ # As a last resort, use the slow shell script. Don't cache a
+ # value for MKDIR_P within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the value is a relative name.
+ test -d ./--version && rmdir ./--version
+ MKDIR_P="$ac_install_sh -d"
+ fi
+fi
+{ echo "$as_me:$LINENO: result: $MKDIR_P" >&5
+echo "${ECHO_T}$MKDIR_P" >&6; }
+
+mkdir_p="$MKDIR_P"
+case $mkdir_p in
+ [\\/$]* | ?:[\\/]*) ;;
+ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+
+for ac_prog in gawk mawk nawk awk
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_AWK+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$AWK"; then
+ ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_AWK="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+ { echo "$as_me:$LINENO: result: $AWK" >&5
+echo "${ECHO_T}$AWK" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+
+ test -n "$AWK" && break
+done
+
+{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; }
+set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
+all:
+ @echo '@@@%%%=$(MAKE)=@@@%%%'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+ *@@@%%%=?*=@@@%%%*)
+ eval ac_cv_prog_make_${ac_make}_set=yes;;
+ *)
+ eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
+rm -f conftest.make
+fi
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+ { echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
+ SET_MAKE=
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+ SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+ am__leading_dot=.
+else
+ am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+ # is not polluted with repeated "-I."
+ am__isrc=' -I$(srcdir)'
+ # test to see if srcdir already configured
+ if test -f $srcdir/config.status; then
+ { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
+echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+ if (cygpath --version) >/dev/null 2>/dev/null; then
+ CYGPATH_W='cygpath -w'
+ else
+ CYGPATH_W=echo
+ fi
+fi
+
+
+# Define the identity of the package.
+ PACKAGE=bluez-hcidump
+ VERSION=1.41
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE "$PACKAGE"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define VERSION "$VERSION"
+_ACEOF
+
+# Some tools Automake needs.
+
+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
+
+
+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
+
+
+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
+
+
+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
+
+
+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+
+install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
+
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'. However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_STRIP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+ { echo "$as_me:$LINENO: result: $STRIP" >&5
+echo "${ECHO_T}$STRIP" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+ ac_ct_STRIP=$STRIP
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_STRIP"; then
+ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_STRIP="strip"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+ { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+echo "${ECHO_T}$ac_ct_STRIP" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+ if test "x$ac_ct_STRIP" = x; then
+ STRIP=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+ STRIP=$ac_ct_STRIP
+ fi
+else
+ STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
+# We need awk for the "check" target. The system "awk" is bad on
+# some platforms.
+# Always define AMTAR for backward compatibility.
+
+AMTAR=${AMTAR-"${am_missing_run}tar"}
+
+am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
+
+
+
+
+
+ac_config_headers="$ac_config_headers config.h"
+
+
+{ echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6; }
+ # Check whether --enable-maintainer-mode was given.
+if test "${enable_maintainer_mode+set}" = set; then
+ enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval
+else
+ USE_MAINTAINER_MODE=no
+fi
+
+ { echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5
+echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6; }
+ if test $USE_MAINTAINER_MODE = yes; then
+ MAINTAINER_MODE_TRUE=
+ MAINTAINER_MODE_FALSE='#'
+else
+ MAINTAINER_MODE_TRUE='#'
+ MAINTAINER_MODE_FALSE=
+fi
+
+ MAINT=$MAINTAINER_MODE_TRUE
+
+
+
+
+
+
+ if (test "${CFLAGS}" = ""); then
+ CFLAGS="-Wall -O2"
+ fi
+
+ if (test "${prefix}" = "NONE"); then
+ if (test "$sysconfdir" = '${prefix}/etc'); then
+ sysconfdir='/etc'
+
+ fi
+
+ if (test "$mandir" = '${prefix}/man'); then
+ mandir='${prefix}/share/man'
+
+ fi
+
+ prefix="${ac_default_prefix}"
+ fi
+
+ if (test "${libdir}" = '${exec_prefix}/lib'); then
+ libdir="${prefix}/lib"
+ fi
+
+ if (test "$sysconfdir" = '${prefix}/etc'); then
+ configdir="${prefix}/etc/bluetooth"
+ else
+ configdir="${sysconfdir}/bluetooth"
+ fi
+
+
+cat >>confdefs.h <<_ACEOF
+#define CONFIGDIR "${configdir}"
+_ACEOF
+
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_CC="${ac_tool_prefix}gcc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+ ac_ct_CC=$CC
+ # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_CC="gcc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+ if test "x$ac_ct_CC" = x; then
+ CC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+ CC=$ac_ct_CC
+ fi
+else
+ CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_CC="${ac_tool_prefix}cc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+
+ fi
+fi
+if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+ ac_prog_rejected=yes
+ continue
+ fi
+ ac_cv_prog_CC="cc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+if test $ac_prog_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $ac_cv_prog_CC
+ shift
+ if test $# != 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+ fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+
+fi
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in cl.exe
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+
+ test -n "$CC" && break
+ done
+fi
+if test -z "$CC"; then
+ ac_ct_CC=$CC
+ for ac_prog in cl.exe
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_CC="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+
+ test -n "$ac_ct_CC" && break
+done
+
+ if test "x$ac_ct_CC" = x; then
+ CC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+ CC=$ac_ct_CC
+ fi
+fi
+
+fi
+
+
+test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
+See \`config.log' for more details." >&5
+echo "$as_me: error: no acceptable C compiler found in \$PATH
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+
+# Provide some information about the compiler.
+echo "$as_me:$LINENO: checking for C compiler version" >&5
+ac_compiler=`set X $ac_compile; echo $2`
+{ (ac_try="$ac_compiler --version >&5"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compiler --version >&5") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+{ (ac_try="$ac_compiler -v >&5"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compiler -v >&5") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+{ (ac_try="$ac_compiler -V >&5"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compiler -V >&5") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
+echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; }
+ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+#
+# List of possible output files, starting from the most likely.
+# The algorithm is not robust to junk in `.', hence go to wildcards (a.*)
+# only as a last resort. b.out is created by i960 compilers.
+ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out'
+#
+# The IRIX 6 linker writes into existing files which may not be
+# executable, retaining their permissions. Remove them first so a
+# subsequent execution test works.
+ac_rmfiles=
+for ac_file in $ac_files
+do
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
+ * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+ esac
+done
+rm -f $ac_rmfiles
+
+if { (ac_try="$ac_link_default"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link_default") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile. We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files ''
+do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj )
+ ;;
+ [ab].out )
+ # We found the default executable, but exeext='' is most
+ # certainly right.
+ break;;
+ *.* )
+ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+ then :; else
+ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ fi
+ # We set ac_cv_exeext here because the later test for it is not
+ # safe: cross compilers may not add the suffix if given an `-o'
+ # argument, so we may need to know it at that point already.
+ # Even if this section looks crufty: it has the advantage of
+ # actually working.
+ break;;
+ * )
+ break;;
+ esac
+done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
+
+else
+ ac_file=''
+fi
+
+{ echo "$as_me:$LINENO: result: $ac_file" >&5
+echo "${ECHO_T}$ac_file" >&6; }
+if test -z "$ac_file"; then
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
+See \`config.log' for more details." >&5
+echo "$as_me: error: C compiler cannot create executables
+See \`config.log' for more details." >&2;}
+ { (exit 77); exit 77; }; }
+fi
+
+ac_exeext=$ac_cv_exeext
+
+# Check that the compiler produces executables we can run. If not, either
+# the compiler is broken, or we cross compile.
+{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5
+echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; }
+# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
+# If not cross compiling, check that we can run a simple program.
+if test "$cross_compiling" != yes; then
+ if { ac_try='./$ac_file'
+ { (case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ cross_compiling=no
+ else
+ if test "$cross_compiling" = maybe; then
+ cross_compiling=yes
+ else
+ { { echo "$as_me:$LINENO: error: cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+ fi
+fi
+{ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
+
+rm -f a.out a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+# Check that the compiler produces executables we can run. If not, either
+# the compiler is broken, or we cross compile.
+{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
+echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; }
+{ echo "$as_me:$LINENO: result: $cross_compiling" >&5
+echo "${ECHO_T}$cross_compiling" >&6; }
+
+{ echo "$as_me:$LINENO: checking for suffix of executables" >&5
+echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; }
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
+ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ break;;
+ * ) break;;
+ esac
+done
+else
+ { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+rm -f conftest$ac_cv_exeext
+{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
+echo "${ECHO_T}$ac_cv_exeext" >&6; }
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+{ echo "$as_me:$LINENO: checking for suffix of object files" >&5
+echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; }
+if test "${ac_cv_objext+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ for ac_file in conftest.o conftest.obj conftest.*; do
+ test -f "$ac_file" || continue;
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;;
+ *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+ break;;
+ esac
+done
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute suffix of object files: cannot compile
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
+echo "${ECHO_T}$ac_cv_objext" >&6; }
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
+echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; }
+if test "${ac_cv_c_compiler_gnu+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+#ifndef __GNUC__
+ choke me
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_compiler_gnu=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_compiler_gnu=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
+echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; }
+GCC=`test $ac_compiler_gnu = yes && echo yes`
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
+echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; }
+if test "${ac_cv_prog_cc_g+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_save_c_werror_flag=$ac_c_werror_flag
+ ac_c_werror_flag=yes
+ ac_cv_prog_cc_g=no
+ CFLAGS="-g"
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_prog_cc_g=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ CFLAGS=""
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ :
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_c_werror_flag=$ac_save_c_werror_flag
+ CFLAGS="-g"
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_prog_cc_g=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; }
+if test "$ac_test_CFLAGS" = set; then
+ CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+ if test "$GCC" = yes; then
+ CFLAGS="-g -O2"
+ else
+ CFLAGS="-g"
+ fi
+else
+ if test "$GCC" = yes; then
+ CFLAGS="-O2"
+ else
+ CFLAGS=
+ fi
+fi
+{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
+echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; }
+if test "${ac_cv_prog_cc_c89+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <stdarg.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+ char **p;
+ int i;
+{
+ return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+ char *s;
+ va_list v;
+ va_start (v,p);
+ s = g (p, va_arg (v,int));
+ va_end (v);
+ return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
+ function prototypes and stuff, but not '\xHH' hex character constants.
+ These don't provoke an error unfortunately, instead are silently treated
+ as 'x'. The following induces an error, until -std is added to get
+ proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
+ array size at least. It's necessary to write '\x00'==0 to get something
+ that's true only with -std. */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+ inside strings and character constants. */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
+ ;
+ return 0;
+}
+_ACEOF
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+ CC="$ac_save_CC $ac_arg"
+ rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+ (eval "$ac_compile") 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then
+ ac_cv_prog_cc_c89=$ac_arg
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
+fi
+
+rm -f core conftest.err conftest.$ac_objext
+ test "x$ac_cv_prog_cc_c89" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+ x)
+ { echo "$as_me:$LINENO: result: none needed" >&5
+echo "${ECHO_T}none needed" >&6; } ;;
+ xno)
+ { echo "$as_me:$LINENO: result: unsupported" >&5
+echo "${ECHO_T}unsupported" >&6; } ;;
+ *)
+ CC="$CC $ac_cv_prog_cc_c89"
+ { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;;
+esac
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+DEPDIR="${am__leading_dot}deps"
+
+ac_config_commands="$ac_config_commands depfiles"
+
+
+am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+ @echo done
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+{ echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
+echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6; }
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# We grep out `Entering directory' and `Leaving directory'
+# messages which can occur if `w' ends up in MAKEFLAGS.
+# In particular we don't look at `^make:' because GNU make might
+# be invoked under some other name (usually "gmake"), in which
+# case it prints its new name instead of `make'.
+if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
+ am__include=include
+ am__quote=
+ _am_result=GNU
+fi
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+ echo '.include "confinc"' > confmf
+ if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ fi
+fi
+
+
+{ echo "$as_me:$LINENO: result: $_am_result" >&5
+echo "${ECHO_T}$_am_result" >&6; }
+rm -f confinc confmf
+
+# Check whether --enable-dependency-tracking was given.
+if test "${enable_dependency_tracking+set}" = set; then
+ enableval=$enable_dependency_tracking;
+fi
+
+if test "x$enable_dependency_tracking" != xno; then
+ am_depcomp="$ac_aux_dir/depcomp"
+ AMDEPBACKSLASH='\'
+fi
+ if test "x$enable_dependency_tracking" != xno; then
+ AMDEP_TRUE=
+ AMDEP_FALSE='#'
+else
+ AMDEP_TRUE='#'
+ AMDEP_FALSE=
+fi
+
+
+
+depcc="$CC" am_compiler_list=
+
+{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
+echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; }
+if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named `D' -- because `-MD' means `put the output
+ # in D'.
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_CC_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+ fi
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+ # Solaris 8's {/usr,}/bin/sh.
+ touch sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ case $depmode in
+ nosideeffect)
+ # after this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ none) break ;;
+ esac
+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle `-M -o', and we need to detect this.
+ if depmode=$depmode \
+ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_CC_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_CC_dependencies_compiler_type=none
+fi
+
+fi
+{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
+echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; }
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+ if
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+ am__fastdepCC_TRUE=
+ am__fastdepCC_FALSE='#'
+else
+ am__fastdepCC_TRUE='#'
+ am__fastdepCC_FALSE=
+fi
+
+
+
+ { echo "$as_me:$LINENO: checking whether ${CC-cc} accepts -fPIE" >&5
+echo $ECHO_N "checking whether ${CC-cc} accepts -fPIE... $ECHO_C" >&6; }
+if test "${ac_cv_prog_cc_pie+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+ echo 'void f(){}' > conftest.c
+ if test -z "`${CC-cc} -fPIE -pie -c conftest.c 2>&1`"; then
+ ac_cv_prog_cc_pie=yes
+ else
+ ac_cv_prog_cc_pie=no
+ fi
+ rm -rf conftest*
+
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_pie" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_pie" >&6; }
+
+# Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
+if test -z "$INSTALL"; then
+if test "${ac_cv_path_install+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in
+ ./ | .// | /cC/* | \
+ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
+ /usr/ucb/* ) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
+ if test $ac_prog = install &&
+ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ :
+ elif test $ac_prog = install &&
+ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # program-specific install script used by HP pwplus--don't use.
+ :
+ else
+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+ break 3
+ fi
+ fi
+ done
+ done
+ ;;
+esac
+done
+IFS=$as_save_IFS
+
+
+fi
+ if test "${ac_cv_path_install+set}" = set; then
+ INSTALL=$ac_cv_path_install
+ else
+ # As a last resort, use the slow shell script. Don't cache a
+ # value for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the value is a relative name.
+ INSTALL=$ac_install_sh
+ fi
+fi
+{ echo "$as_me:$LINENO: result: $INSTALL" >&5
+echo "${ECHO_T}$INSTALL" >&6; }
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_RANLIB+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+ { echo "$as_me:$LINENO: result: $RANLIB" >&5
+echo "${ECHO_T}$RANLIB" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+ ac_ct_RANLIB=$RANLIB
+ # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_RANLIB"; then
+ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_RANLIB="ranlib"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+ { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
+echo "${ECHO_T}$ac_ct_RANLIB" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+ if test "x$ac_ct_RANLIB" = x; then
+ RANLIB=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+ RANLIB=$ac_ct_RANLIB
+ fi
+else
+ RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+
+
+
+if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args.
+set dummy ${ac_tool_prefix}pkg-config; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_path_PKG_CONFIG+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ case $PKG_CONFIG in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+PKG_CONFIG=$ac_cv_path_PKG_CONFIG
+if test -n "$PKG_CONFIG"; then
+ { echo "$as_me:$LINENO: result: $PKG_CONFIG" >&5
+echo "${ECHO_T}$PKG_CONFIG" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_path_PKG_CONFIG"; then
+ ac_pt_PKG_CONFIG=$PKG_CONFIG
+ # Extract the first word of "pkg-config", so it can be a program name with args.
+set dummy pkg-config; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_path_ac_pt_PKG_CONFIG+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ case $ac_pt_PKG_CONFIG in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG
+if test -n "$ac_pt_PKG_CONFIG"; then
+ { echo "$as_me:$LINENO: result: $ac_pt_PKG_CONFIG" >&5
+echo "${ECHO_T}$ac_pt_PKG_CONFIG" >&6; }
+else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+ if test "x$ac_pt_PKG_CONFIG" = x; then
+ PKG_CONFIG=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet. If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+ PKG_CONFIG=$ac_pt_PKG_CONFIG
+ fi
+else
+ PKG_CONFIG="$ac_cv_path_PKG_CONFIG"
+fi
+
+fi
+if test -n "$PKG_CONFIG"; then
+ _pkg_min_version=0.9.0
+ { echo "$as_me:$LINENO: checking pkg-config is at least version $_pkg_min_version" >&5
+echo $ECHO_N "checking pkg-config is at least version $_pkg_min_version... $ECHO_C" >&6; }
+ if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
+ { echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
+ else
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+ PKG_CONFIG=""
+ fi
+
+fi
+
+
+pkg_failed=no
+{ echo "$as_me:$LINENO: checking for BLUEZ" >&5
+echo $ECHO_N "checking for BLUEZ... $ECHO_C" >&6; }
+
+if test -n "$PKG_CONFIG"; then
+ if test -n "$BLUEZ_CFLAGS"; then
+ pkg_cv_BLUEZ_CFLAGS="$BLUEZ_CFLAGS"
+ else
+ if test -n "$PKG_CONFIG" && \
+ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"bluez\"") >&5
+ ($PKG_CONFIG --exists --print-errors "bluez") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ pkg_cv_BLUEZ_CFLAGS=`$PKG_CONFIG --cflags "bluez" 2>/dev/null`
+else
+ pkg_failed=yes
+fi
+ fi
+else
+ pkg_failed=untried
+fi
+if test -n "$PKG_CONFIG"; then
+ if test -n "$BLUEZ_LIBS"; then
+ pkg_cv_BLUEZ_LIBS="$BLUEZ_LIBS"
+ else
+ if test -n "$PKG_CONFIG" && \
+ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"bluez\"") >&5
+ ($PKG_CONFIG --exists --print-errors "bluez") 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ pkg_cv_BLUEZ_LIBS=`$PKG_CONFIG --libs "bluez" 2>/dev/null`
+else
+ pkg_failed=yes
+fi
+ fi
+else
+ pkg_failed=untried
+fi
+
+
+
+if test $pkg_failed = yes; then
+
+if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
+ _pkg_short_errors_supported=yes
+else
+ _pkg_short_errors_supported=no
+fi
+ if test $_pkg_short_errors_supported = yes; then
+ BLUEZ_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "bluez"`
+ else
+ BLUEZ_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "bluez"`
+ fi
+ # Put the nasty error message in config.log where it belongs
+ echo "$BLUEZ_PKG_ERRORS" >&5
+
+ { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+ { { echo "$as_me:$LINENO: error: Bluetooth library is required" >&5
+echo "$as_me: error: Bluetooth library is required" >&2;}
+ { (exit 1); exit 1; }; }
+elif test $pkg_failed = untried; then
+ { { echo "$as_me:$LINENO: error: Bluetooth library is required" >&5
+echo "$as_me: error: Bluetooth library is required" >&2;}
+ { (exit 1); exit 1; }; }
+else
+ BLUEZ_CFLAGS=$pkg_cv_BLUEZ_CFLAGS
+ BLUEZ_LIBS=$pkg_cv_BLUEZ_LIBS
+ { echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
+ dummy=yes
+fi
+
+
+
+
+
+ fortify_enable=yes
+ debug_enable=no
+ pie_enable=no
+
+ # Check whether --enable-fortify was given.
+if test "${enable_fortify+set}" = set; then
+ enableval=$enable_fortify;
+ fortify_enable=${enableval}
+
+fi
+
+
+ # Check whether --enable-debug was given.
+if test "${enable_debug+set}" = set; then
+ enableval=$enable_debug;
+ debug_enable=${enableval}
+
+fi
+
+
+ # Check whether --enable-pie was given.
+if test "${enable_pie+set}" = set; then
+ enableval=$enable_pie;
+ pie_enable=${enableval}
+
+fi
+
+
+ if (test "${fortify_enable}" = "yes"); then
+ CFLAGS="$CFLAGS -D_FORTIFY_SOURCE=2"
+ fi
+
+ if (test "${debug_enable}" = "yes" && test "${ac_cv_prog_cc_g}" = "yes"); then
+ CFLAGS="$CFLAGS -g"
+ fi
+
+ if (test "${pie_enable}" = "yes" && test "${ac_cv_prog_cc_pie}" = "yes"); then
+ CFLAGS="$CFLAGS -fPIE"
+ LDFLAGS="$LDFLAGS -pie"
+ fi
+
+
+ac_config_files="$ac_config_files Makefile src/Makefile parser/Makefile"
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems. If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, we kill variables containing newlines.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(
+ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+ eval ac_val=\$$ac_var
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+ *) $as_unset $ac_var ;;
+ esac ;;
+ esac
+ done
+
+ (set) 2>&1 |
+ case $as_nl`(ac_space=' '; set) 2>&1` in #(
+ *${as_nl}ac_space=\ *)
+ # `set' does not quote correctly, so add quotes (double-quote
+ # substitution turns \\\\ into \\, and sed turns \\ into \).
+ sed -n \
+ "s/'/'\\\\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+ ;; #(
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+ ;;
+ esac |
+ sort
+) |
+ sed '
+ /^ac_cv_env_/b end
+ t clear
+ :clear
+ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+ t end
+ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+ :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+ if test -w "$cache_file"; then
+ test "x$cache_file" != "x/dev/null" &&
+ { echo "$as_me:$LINENO: updating cache $cache_file" >&5
+echo "$as_me: updating cache $cache_file" >&6;}
+ cat confcache >$cache_file
+ else
+ { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
+echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+ fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+DEFS=-DHAVE_CONFIG_H
+
+ac_libobjs=
+ac_ltlibobjs=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+ # 1. Remove the extension, and $U if already installed.
+ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+ ac_i=`echo "$ac_i" | sed "$ac_script"`
+ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
+ # will be set to the directory where LIBOBJS objects are built.
+ ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+ ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+: ${CONFIG_STATUS=./config.status}
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
+echo "$as_me: creating $CONFIG_STATUS" >&6;}
+cat >$CONFIG_STATUS <<_ACEOF
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+SHELL=\${CONFIG_SHELL-$SHELL}
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+## --------------------- ##
+## M4sh Initialization. ##
+## --------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in
+ *posix*) set -o posix ;;
+esac
+
+fi
+
+
+
+
+# PATH needs CR
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+
+# Support unset when possible.
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ as_unset=unset
+else
+ as_unset=false
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+as_nl='
+'
+IFS=" "" $as_nl"
+
+# Find who we are. Look in the path if we contain no directory separator.
+case $0 in
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+IFS=$as_save_IFS
+
+ ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+ as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ { (exit 1); exit 1; }
+fi
+
+# Work around bugs in pre-3.0 UWIN ksh.
+for as_var in ENV MAIL MAILPATH
+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+for as_var in \
+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+ LC_TELEPHONE LC_TIME
+do
+ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
+ eval $as_var=C; export $as_var
+ else
+ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+ fi
+done
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+
+# Name of the executable.
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+
+# CDPATH.
+$as_unset CDPATH
+
+
+
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
+
+ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
+ # uniformly replaced by the line number. The first 'sed' inserts a
+ # line-number line after each line using $LINENO; the second 'sed'
+ # does the real work. The second script uses 'N' to pair each
+ # line-number line with the line containing $LINENO, and appends
+ # trailing '-' during substitution so that $LINENO is not a special
+ # case at line end.
+ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
+ # scripts with optimization help from Paolo Bonzini. Blame Lee
+ # E. McMahon (1931-1989) for sed's syntax. :-)
+ sed -n '
+ p
+ /[$]LINENO/=
+ ' <$as_myself |
+ sed '
+ s/[$]LINENO.*/&-/
+ t lineno
+ b
+ :lineno
+ N
+ :loop
+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+ t loop
+ s/-\n.*//
+ ' >$as_me.lineno &&
+ chmod +x "$as_me.lineno" ||
+ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+ { (exit 1); exit 1; }; }
+
+ # Don't try to exec as it changes $[0], causing all sort of problems
+ # (the dirname of $[0] is not the place where we might find the
+ # original and so on. Autoconf is especially sensitive to this).
+ . "./$as_me.lineno"
+ # Exit status is that of the last command.
+ exit
+}
+
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in
+-n*)
+ case `echo 'x\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+ *) ECHO_C='\c';;
+ esac;;
+*)
+ ECHO_N='-n';;
+esac
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+else
+ rm -f conf$$.dir
+ mkdir conf$$.dir
+fi
+echo >conf$$.file
+if ln -s conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -p'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ as_ln_s='cp -p'
+elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+else
+ as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p=:
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+ as_test_x='test -x'
+else
+ if ls -dL / >/dev/null 2>&1; then
+ as_ls_L_option=L
+ else
+ as_ls_L_option=
+ fi
+ as_test_x='
+ eval sh -c '\''
+ if test -d "$1"; then
+ test -d "$1/.";
+ else
+ case $1 in
+ -*)set "./$1";;
+ esac;
+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
+ ???[sx]*):;;*)false;;esac;fi
+ '\'' sh
+ '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+exec 6>&1
+
+# Save the log message, to keep $[0] and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.
+ac_log="
+This file was extended by $as_me, which was
+generated by GNU Autoconf 2.61. Invocation command line was
+
+ CONFIG_FILES = $CONFIG_FILES
+ CONFIG_HEADERS = $CONFIG_HEADERS
+ CONFIG_LINKS = $CONFIG_LINKS
+ CONFIG_COMMANDS = $CONFIG_COMMANDS
+ $ $0 $@
+
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<_ACEOF
+# Files that config.status was made for.
+config_files="$ac_config_files"
+config_headers="$ac_config_headers"
+config_commands="$ac_config_commands"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+ac_cs_usage="\
+\`$as_me' instantiates files from templates according to the
+current configuration.
+
+Usage: $0 [OPTIONS] [FILE]...
+
+ -h, --help print this help, then exit
+ -V, --version print version number and configuration settings, then exit
+ -q, --quiet do not print progress messages
+ -d, --debug don't remove temporary files
+ --recheck update $as_me by reconfiguring in the same conditions
+ --file=FILE[:TEMPLATE]
+ instantiate the configuration file FILE
+ --header=FILE[:TEMPLATE]
+ instantiate the configuration header FILE
+
+Configuration files:
+$config_files
+
+Configuration headers:
+$config_headers
+
+Configuration commands:
+$config_commands
+
+Report bugs to <bug-autoconf@gnu.org>."
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+ac_cs_version="\\
+config.status
+configured by $0, generated by GNU Autoconf 2.61,
+ with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
+
+Copyright (C) 2006 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
+MKDIR_P='$MKDIR_P'
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+# If no file are specified by the user, then we need to provide default
+# value. By we need to know if files were specified by the user.
+ac_need_defaults=:
+while test $# != 0
+do
+ case $1 in
+ --*=*)
+ ac_option=`expr "X$1" : 'X\([^=]*\)='`
+ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+ ac_shift=:
+ ;;
+ *)
+ ac_option=$1
+ ac_optarg=$2
+ ac_shift=shift
+ ;;
+ esac
+
+ case $ac_option in
+ # Handling of the options.
+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+ ac_cs_recheck=: ;;
+ --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+ echo "$ac_cs_version"; exit ;;
+ --debug | --debu | --deb | --de | --d | -d )
+ debug=: ;;
+ --file | --fil | --fi | --f )
+ $ac_shift
+ CONFIG_FILES="$CONFIG_FILES $ac_optarg"
+ ac_need_defaults=false;;
+ --header | --heade | --head | --hea )
+ $ac_shift
+ CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
+ ac_need_defaults=false;;
+ --he | --h)
+ # Conflict between --help and --header
+ { echo "$as_me: error: ambiguous option: $1
+Try \`$0 --help' for more information." >&2
+ { (exit 1); exit 1; }; };;
+ --help | --hel | -h )
+ echo "$ac_cs_usage"; exit ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil | --si | --s)
+ ac_cs_silent=: ;;
+
+ # This is an error.
+ -*) { echo "$as_me: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&2
+ { (exit 1); exit 1; }; } ;;
+
+ *) ac_config_targets="$ac_config_targets $1"
+ ac_need_defaults=false ;;
+
+ esac
+ shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+ exec 6>/dev/null
+ ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+if \$ac_cs_recheck; then
+ echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
+ CONFIG_SHELL=$SHELL
+ export CONFIG_SHELL
+ exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+exec 5>>config.log
+{
+ echo
+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+ echo "$ac_log"
+} >&5
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+#
+# INIT-COMMANDS
+#
+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+
+# Handling of arguments.
+for ac_config_target in $ac_config_targets
+do
+ case $ac_config_target in
+ "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
+ "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+ "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
+ "parser/Makefile") CONFIG_FILES="$CONFIG_FILES parser/Makefile" ;;
+
+ *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
+echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
+ { (exit 1); exit 1; }; };;
+ esac
+done
+
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used. Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+ test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
+ test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+fi
+
+# Have a temporary directory for convenience. Make it in the build tree
+# simply because there is no reason against having it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
+$debug ||
+{
+ tmp=
+ trap 'exit_status=$?
+ { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
+' 0
+ trap '{ (exit 1); exit 1; }' 1 2 13 15
+}
+# Create a (secure) tmp directory for tmp files.
+
+{
+ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
+ test -n "$tmp" && test -d "$tmp"
+} ||
+{
+ tmp=./conf$$-$RANDOM
+ (umask 077 && mkdir "$tmp")
+} ||
+{
+ echo "$me: cannot create a temporary directory in ." >&2
+ { (exit 1); exit 1; }
+}
+
+#
+# Set up the sed scripts for CONFIG_FILES section.
+#
+
+# No need to generate the scripts if there are no CONFIG_FILES.
+# This happens for instance when ./config.status config.h
+if test -n "$CONFIG_FILES"; then
+
+_ACEOF
+
+
+
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+ cat >conf$$subs.sed <<_ACEOF
+SHELL!$SHELL$ac_delim
+PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim
+PACKAGE_NAME!$PACKAGE_NAME$ac_delim
+PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim
+PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim
+PACKAGE_STRING!$PACKAGE_STRING$ac_delim
+PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim
+exec_prefix!$exec_prefix$ac_delim
+prefix!$prefix$ac_delim
+program_transform_name!$program_transform_name$ac_delim
+bindir!$bindir$ac_delim
+sbindir!$sbindir$ac_delim
+libexecdir!$libexecdir$ac_delim
+datarootdir!$datarootdir$ac_delim
+datadir!$datadir$ac_delim
+sysconfdir!$sysconfdir$ac_delim
+sharedstatedir!$sharedstatedir$ac_delim
+localstatedir!$localstatedir$ac_delim
+includedir!$includedir$ac_delim
+oldincludedir!$oldincludedir$ac_delim
+docdir!$docdir$ac_delim
+infodir!$infodir$ac_delim
+htmldir!$htmldir$ac_delim
+dvidir!$dvidir$ac_delim
+pdfdir!$pdfdir$ac_delim
+psdir!$psdir$ac_delim
+libdir!$libdir$ac_delim
+localedir!$localedir$ac_delim
+mandir!$mandir$ac_delim
+DEFS!$DEFS$ac_delim
+ECHO_C!$ECHO_C$ac_delim
+ECHO_N!$ECHO_N$ac_delim
+ECHO_T!$ECHO_T$ac_delim
+LIBS!$LIBS$ac_delim
+build_alias!$build_alias$ac_delim
+host_alias!$host_alias$ac_delim
+target_alias!$target_alias$ac_delim
+INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim
+INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim
+INSTALL_DATA!$INSTALL_DATA$ac_delim
+am__isrc!$am__isrc$ac_delim
+CYGPATH_W!$CYGPATH_W$ac_delim
+PACKAGE!$PACKAGE$ac_delim
+VERSION!$VERSION$ac_delim
+ACLOCAL!$ACLOCAL$ac_delim
+AUTOCONF!$AUTOCONF$ac_delim
+AUTOMAKE!$AUTOMAKE$ac_delim
+AUTOHEADER!$AUTOHEADER$ac_delim
+MAKEINFO!$MAKEINFO$ac_delim
+install_sh!$install_sh$ac_delim
+STRIP!$STRIP$ac_delim
+INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim
+mkdir_p!$mkdir_p$ac_delim
+AWK!$AWK$ac_delim
+SET_MAKE!$SET_MAKE$ac_delim
+am__leading_dot!$am__leading_dot$ac_delim
+AMTAR!$AMTAR$ac_delim
+am__tar!$am__tar$ac_delim
+am__untar!$am__untar$ac_delim
+MAINTAINER_MODE_TRUE!$MAINTAINER_MODE_TRUE$ac_delim
+MAINTAINER_MODE_FALSE!$MAINTAINER_MODE_FALSE$ac_delim
+MAINT!$MAINT$ac_delim
+CC!$CC$ac_delim
+CFLAGS!$CFLAGS$ac_delim
+LDFLAGS!$LDFLAGS$ac_delim
+CPPFLAGS!$CPPFLAGS$ac_delim
+ac_ct_CC!$ac_ct_CC$ac_delim
+EXEEXT!$EXEEXT$ac_delim
+OBJEXT!$OBJEXT$ac_delim
+DEPDIR!$DEPDIR$ac_delim
+am__include!$am__include$ac_delim
+am__quote!$am__quote$ac_delim
+AMDEP_TRUE!$AMDEP_TRUE$ac_delim
+AMDEP_FALSE!$AMDEP_FALSE$ac_delim
+AMDEPBACKSLASH!$AMDEPBACKSLASH$ac_delim
+CCDEPMODE!$CCDEPMODE$ac_delim
+am__fastdepCC_TRUE!$am__fastdepCC_TRUE$ac_delim
+am__fastdepCC_FALSE!$am__fastdepCC_FALSE$ac_delim
+RANLIB!$RANLIB$ac_delim
+PKG_CONFIG!$PKG_CONFIG$ac_delim
+BLUEZ_CFLAGS!$BLUEZ_CFLAGS$ac_delim
+BLUEZ_LIBS!$BLUEZ_LIBS$ac_delim
+LIBOBJS!$LIBOBJS$ac_delim
+LTLIBOBJS!$LTLIBOBJS$ac_delim
+_ACEOF
+
+ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 84; then
+ break
+ elif $ac_last_try; then
+ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+ { (exit 1); exit 1; }; }
+ else
+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+ fi
+done
+
+ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
+if test -n "$ac_eof"; then
+ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
+ ac_eof=`expr $ac_eof + 1`
+fi
+
+cat >>$CONFIG_STATUS <<_ACEOF
+cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end
+_ACEOF
+sed '
+s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
+s/^/s,@/; s/!/@,|#_!!_#|/
+:n
+t n
+s/'"$ac_delim"'$/,g/; t
+s/$/\\/; p
+N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
+' >>$CONFIG_STATUS <conf$$subs.sed
+rm -f conf$$subs.sed
+cat >>$CONFIG_STATUS <<_ACEOF
+:end
+s/|#_!!_#|//g
+CEOF$ac_eof
+_ACEOF
+
+
+# VPATH may cause trouble with some makes, so we remove $(srcdir),
+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+ ac_vpsub='/^[ ]*VPATH[ ]*=/{
+s/:*\$(srcdir):*/:/
+s/:*\${srcdir}:*/:/
+s/:*@srcdir@:*/:/
+s/^\([^=]*=[ ]*\):*/\1/
+s/:*$//
+s/^[^=]*=[ ]*$//
+}'
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+fi # test -n "$CONFIG_FILES"
+
+
+for ac_tag in :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS
+do
+ case $ac_tag in
+ :[FHLC]) ac_mode=$ac_tag; continue;;
+ esac
+ case $ac_mode$ac_tag in
+ :[FHL]*:*);;
+ :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5
+echo "$as_me: error: Invalid tag $ac_tag." >&2;}
+ { (exit 1); exit 1; }; };;
+ :[FH]-) ac_tag=-:-;;
+ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+ esac
+ ac_save_IFS=$IFS
+ IFS=:
+ set x $ac_tag
+ IFS=$ac_save_IFS
+ shift
+ ac_file=$1
+ shift
+
+ case $ac_mode in
+ :L) ac_source=$1;;
+ :[FH])
+ ac_file_inputs=
+ for ac_f
+ do
+ case $ac_f in
+ -) ac_f="$tmp/stdin";;
+ *) # Look for the file first in the build tree, then in the source tree
+ # (if the path is not absolute). The absolute path cannot be DOS-style,
+ # because $ac_f cannot contain `:'.
+ test -f "$ac_f" ||
+ case $ac_f in
+ [\\/$]*) false;;
+ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+ esac ||
+ { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
+echo "$as_me: error: cannot find input file: $ac_f" >&2;}
+ { (exit 1); exit 1; }; };;
+ esac
+ ac_file_inputs="$ac_file_inputs $ac_f"
+ done
+
+ # Let's still pretend it is `configure' which instantiates (i.e., don't
+ # use $as_me), people would be surprised to read:
+ # /* config.h. Generated by config.status. */
+ configure_input="Generated from "`IFS=:
+ echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure."
+ if test x"$ac_file" != x-; then
+ configure_input="$ac_file. $configure_input"
+ { echo "$as_me:$LINENO: creating $ac_file" >&5
+echo "$as_me: creating $ac_file" >&6;}
+ fi
+
+ case $ac_tag in
+ *:-:* | *:-) cat >"$tmp/stdin";;
+ esac
+ ;;
+ esac
+
+ ac_dir=`$as_dirname -- "$ac_file" ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$ac_file" : 'X\(//\)[^/]' \| \
+ X"$ac_file" : 'X\(//\)$' \| \
+ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+echo X"$ac_file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ { as_dir="$ac_dir"
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
+echo "$as_me: error: cannot create directory $as_dir" >&2;}
+ { (exit 1); exit 1; }; }; }
+ ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+ # A ".." for each directory in $ac_dir_suffix.
+ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+ esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+ .) # We are building in place.
+ ac_srcdir=.
+ ac_top_srcdir=$ac_top_builddir_sub
+ ac_abs_top_srcdir=$ac_pwd ;;
+ [\\/]* | ?:[\\/]* ) # Absolute name.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir
+ ac_abs_top_srcdir=$srcdir ;;
+ *) # Relative name.
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_build_prefix$srcdir
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+
+ case $ac_mode in
+ :F)
+ #
+ # CONFIG_FILE
+ #
+
+ case $INSTALL in
+ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
+ esac
+ ac_MKDIR_P=$MKDIR_P
+ case $MKDIR_P in
+ [\\/$]* | ?:[\\/]* ) ;;
+ */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
+ esac
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+
+case `sed -n '/datarootdir/ {
+ p
+ q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p
+' $ac_file_inputs` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+ { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+ ac_datarootdir_hack='
+ s&@datadir@&$datadir&g
+ s&@docdir@&$docdir&g
+ s&@infodir@&$infodir&g
+ s&@localedir@&$localedir&g
+ s&@mandir@&$mandir&g
+ s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF
+ sed "$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s&@configure_input@&$configure_input&;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+s&@MKDIR_P@&$ac_MKDIR_P&;t t
+$ac_datarootdir_hack
+" $ac_file_inputs | sed -f "$tmp/subs-1.sed" >$tmp/out
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+ { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
+ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
+ { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined." >&5
+echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined." >&2;}
+
+ rm -f "$tmp/stdin"
+ case $ac_file in
+ -) cat "$tmp/out"; rm -f "$tmp/out";;
+ *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;;
+ esac
+ ;;
+ :H)
+ #
+ # CONFIG_HEADER
+ #
+_ACEOF
+
+# Transform confdefs.h into a sed script `conftest.defines', that
+# substitutes the proper values into config.h.in to produce config.h.
+rm -f conftest.defines conftest.tail
+# First, append a space to every undef/define line, to ease matching.
+echo 's/$/ /' >conftest.defines
+# Then, protect against being on the right side of a sed subst, or in
+# an unquoted here document, in config.status. If some macros were
+# called several times there might be several #defines for the same
+# symbol, which is useless. But do not sort them, since the last
+# AC_DEFINE must be honored.
+ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
+# These sed commands are passed to sed as "A NAME B PARAMS C VALUE D", where
+# NAME is the cpp macro being defined, VALUE is the value it is being given.
+# PARAMS is the parameter list in the macro definition--in most cases, it's
+# just an empty string.
+ac_dA='s,^\\([ #]*\\)[^ ]*\\([ ]*'
+ac_dB='\\)[ (].*,\\1define\\2'
+ac_dC=' '
+ac_dD=' ,'
+
+uniq confdefs.h |
+ sed -n '
+ t rset
+ :rset
+ s/^[ ]*#[ ]*define[ ][ ]*//
+ t ok
+ d
+ :ok
+ s/[\\&,]/\\&/g
+ s/^\('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/ '"$ac_dA"'\1'"$ac_dB"'\2'"${ac_dC}"'\3'"$ac_dD"'/p
+ s/^\('"$ac_word_re"'\)[ ]*\(.*\)/'"$ac_dA"'\1'"$ac_dB$ac_dC"'\2'"$ac_dD"'/p
+ ' >>conftest.defines
+
+# Remove the space that was appended to ease matching.
+# Then replace #undef with comments. This is necessary, for
+# example, in the case of _POSIX_SOURCE, which is predefined and required
+# on some systems where configure will not decide to define it.
+# (The regexp can be short, since the line contains either #define or #undef.)
+echo 's/ $//
+s,^[ #]*u.*,/* & */,' >>conftest.defines
+
+# Break up conftest.defines:
+ac_max_sed_lines=50
+
+# First sed command is: sed -f defines.sed $ac_file_inputs >"$tmp/out1"
+# Second one is: sed -f defines.sed "$tmp/out1" >"$tmp/out2"
+# Third one will be: sed -f defines.sed "$tmp/out2" >"$tmp/out1"
+# et cetera.
+ac_in='$ac_file_inputs'
+ac_out='"$tmp/out1"'
+ac_nxt='"$tmp/out2"'
+
+while :
+do
+ # Write a here document:
+ cat >>$CONFIG_STATUS <<_ACEOF
+ # First, check the format of the line:
+ cat >"\$tmp/defines.sed" <<\\CEOF
+/^[ ]*#[ ]*undef[ ][ ]*$ac_word_re[ ]*\$/b def
+/^[ ]*#[ ]*define[ ][ ]*$ac_word_re[( ]/b def
+b
+:def
+_ACEOF
+ sed ${ac_max_sed_lines}q conftest.defines >>$CONFIG_STATUS
+ echo 'CEOF
+ sed -f "$tmp/defines.sed"' "$ac_in >$ac_out" >>$CONFIG_STATUS
+ ac_in=$ac_out; ac_out=$ac_nxt; ac_nxt=$ac_in
+ sed 1,${ac_max_sed_lines}d conftest.defines >conftest.tail
+ grep . conftest.tail >/dev/null || break
+ rm -f conftest.defines
+ mv conftest.tail conftest.defines
+done
+rm -f conftest.defines conftest.tail
+
+echo "ac_result=$ac_in" >>$CONFIG_STATUS
+cat >>$CONFIG_STATUS <<\_ACEOF
+ if test x"$ac_file" != x-; then
+ echo "/* $configure_input */" >"$tmp/config.h"
+ cat "$ac_result" >>"$tmp/config.h"
+ if diff $ac_file "$tmp/config.h" >/dev/null 2>&1; then
+ { echo "$as_me:$LINENO: $ac_file is unchanged" >&5
+echo "$as_me: $ac_file is unchanged" >&6;}
+ else
+ rm -f $ac_file
+ mv "$tmp/config.h" $ac_file
+ fi
+ else
+ echo "/* $configure_input */"
+ cat "$ac_result"
+ fi
+ rm -f "$tmp/out12"
+# Compute $ac_file's index in $config_headers.
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+ case $_am_header in
+ $ac_file | $ac_file:* )
+ break ;;
+ * )
+ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+ esac
+done
+echo "timestamp for $ac_file" >`$as_dirname -- $ac_file ||
+$as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X$ac_file : 'X\(//\)[^/]' \| \
+ X$ac_file : 'X\(//\)$' \| \
+ X$ac_file : 'X\(/\)' \| . 2>/dev/null ||
+echo X$ac_file |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`/stamp-h$_am_stamp_count
+ ;;
+
+ :C) { echo "$as_me:$LINENO: executing $ac_file commands" >&5
+echo "$as_me: executing $ac_file commands" >&6;}
+ ;;
+ esac
+
+
+ case $ac_file$ac_mode in
+ "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named `Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # Grep'ing the whole file is not good either: AIX grep has a line
+ # limit of 2048, but all sed's we know have understand at least 4000.
+ if sed 10q "$mf" | grep '^#.*generated by automake' > /dev/null 2>&1; then
+ dirpart=`$as_dirname -- "$mf" ||
+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$mf" : 'X\(//\)[^/]' \| \
+ X"$mf" : 'X\(//\)$' \| \
+ X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
+echo X"$mf" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ else
+ continue
+ fi
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running `make'.
+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+ # When using ansi2knr, U may be empty or an underscore; expand it
+ U=`sed -n 's/^U = //p' < "$mf"`
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`$as_dirname -- "$file" ||
+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$file" : 'X\(//\)[^/]' \| \
+ X"$file" : 'X\(//\)$' \| \
+ X"$file" : 'X\(/\)' \| . 2>/dev/null ||
+echo X"$file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ { as_dir=$dirpart/$fdir
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
+echo "$as_me: error: cannot create directory $as_dir" >&2;}
+ { (exit 1); exit 1; }; }; }
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
+done
+ ;;
+
+ esac
+done # for ac_tag
+
+
+{ (exit 0); exit 0; }
+_ACEOF
+chmod +x $CONFIG_STATUS
+ac_clean_files=$ac_clean_files_save
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded. So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status. When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+ ac_cs_success=:
+ ac_config_status_args=
+ test "$silent" = yes &&
+ ac_config_status_args="$ac_config_status_args --quiet"
+ exec 5>/dev/null
+ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+ exec 5>>config.log
+ # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+ # would make configure fail if this is the last instruction.
+ $ac_cs_success || { (exit 1); exit 1; }
+fi
+
--- /dev/null
+AC_PREREQ(2.50)
+AC_INIT()
+
+AM_INIT_AUTOMAKE(bluez-hcidump, 1.41)
+AM_CONFIG_HEADER(config.h)
+
+AM_MAINTAINER_MODE
+
+AC_INIT_BLUEZ
+
+AC_LANG_C
+
+AC_PROG_CC
+AC_PROG_CC_PIE
+AC_PROG_INSTALL
+AC_PROG_RANLIB
+
+AC_PATH_BLUEZ
+
+AC_ARG_BLUEZ
+
+AC_OUTPUT(Makefile src/Makefile parser/Makefile)
--- /dev/null
+#! /bin/sh
+# depcomp - compile a program generating dependencies as side-effects
+
+scriptversion=2006-10-15.18
+
+# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006 Free Software
+# Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
+
+case $1 in
+ '')
+ echo "$0: No command. Try \`$0 --help' for more information." 1>&2
+ exit 1;
+ ;;
+ -h | --h*)
+ cat <<\EOF
+Usage: depcomp [--help] [--version] PROGRAM [ARGS]
+
+Run PROGRAMS ARGS to compile a file, generating dependencies
+as side-effects.
+
+Environment variables:
+ depmode Dependency tracking mode.
+ source Source file read by `PROGRAMS ARGS'.
+ object Object file output by `PROGRAMS ARGS'.
+ DEPDIR directory where to store dependencies.
+ depfile Dependency file to output.
+ tmpdepfile Temporary file to use when outputing dependencies.
+ libtool Whether libtool is used (yes/no).
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+ exit $?
+ ;;
+ -v | --v*)
+ echo "depcomp $scriptversion"
+ exit $?
+ ;;
+esac
+
+if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+ echo "depcomp: Variables source, object and depmode must be set" 1>&2
+ exit 1
+fi
+
+# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
+depfile=${depfile-`echo "$object" |
+ sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
+tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+
+rm -f "$tmpdepfile"
+
+# Some modes work just like other modes, but use different flags. We
+# parameterize here, but still list the modes in the big case below,
+# to make depend.m4 easier to write. Note that we *cannot* use a case
+# here, because this file can only contain one case statement.
+if test "$depmode" = hp; then
+ # HP compiler uses -M and no extra arg.
+ gccflag=-M
+ depmode=gcc
+fi
+
+if test "$depmode" = dashXmstdout; then
+ # This is just like dashmstdout with a different argument.
+ dashmflag=-xM
+ depmode=dashmstdout
+fi
+
+case "$depmode" in
+gcc3)
+## gcc 3 implements dependency tracking that does exactly what
+## we want. Yay! Note: for some reason libtool 1.4 doesn't like
+## it if -MD -MP comes after the -MF stuff. Hmm.
+## Unfortunately, FreeBSD c89 acceptance of flags depends upon
+## the command line argument order; so add the flags where they
+## appear in depend2.am. Note that the slowdown incurred here
+## affects only configure: in makefiles, %FASTDEP% shortcuts this.
+ for arg
+ do
+ case $arg in
+ -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
+ *) set fnord "$@" "$arg" ;;
+ esac
+ shift # fnord
+ shift # $arg
+ done
+ "$@"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ mv "$tmpdepfile" "$depfile"
+ ;;
+
+gcc)
+## There are various ways to get dependency output from gcc. Here's
+## why we pick this rather obscure method:
+## - Don't want to use -MD because we'd like the dependencies to end
+## up in a subdir. Having to rename by hand is ugly.
+## (We might end up doing this anyway to support other compilers.)
+## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
+## -MM, not -M (despite what the docs say).
+## - Using -M directly means running the compiler twice (even worse
+## than renaming).
+ if test -z "$gccflag"; then
+ gccflag=-MD,
+ fi
+ "$@" -Wp,"$gccflag$tmpdepfile"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
+## The second -e expression handles DOS-style file names with drive letters.
+ sed -e 's/^[^:]*: / /' \
+ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+## This next piece of magic avoids the `deleted header file' problem.
+## The problem is that when a header file which appears in a .P file
+## is deleted, the dependency causes make to die (because there is
+## typically no way to rebuild the header). We avoid this by adding
+## dummy dependencies for each header file. Too bad gcc doesn't do
+## this for us directly.
+ tr ' ' '
+' < "$tmpdepfile" |
+## Some versions of gcc put a space before the `:'. On the theory
+## that the space means something, we add a space to the output as
+## well.
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+hp)
+ # This case exists only to let depend.m4 do its work. It works by
+ # looking at the text of this script. This case will never be run,
+ # since it is checked for above.
+ exit 1
+ ;;
+
+sgi)
+ if test "$libtool" = yes; then
+ "$@" "-Wp,-MDupdate,$tmpdepfile"
+ else
+ "$@" -MDupdate "$tmpdepfile"
+ fi
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+
+ if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
+ echo "$object : \\" > "$depfile"
+
+ # Clip off the initial element (the dependent). Don't try to be
+ # clever and replace this with sed code, as IRIX sed won't handle
+ # lines with more than a fixed number of characters (4096 in
+ # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
+ # the IRIX cc adds comments like `#:fec' to the end of the
+ # dependency line.
+ tr ' ' '
+' < "$tmpdepfile" \
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
+ tr '
+' ' ' >> $depfile
+ echo >> $depfile
+
+ # The second pass generates a dummy entry for each header file.
+ tr ' ' '
+' < "$tmpdepfile" \
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+ >> $depfile
+ else
+ # The sourcefile does not contain any dependencies, so just
+ # store a dummy comment line, to avoid errors with the Makefile
+ # "include basename.Plo" scheme.
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+aix)
+ # The C for AIX Compiler uses -M and outputs the dependencies
+ # in a .u file. In older versions, this file always lives in the
+ # current directory. Also, the AIX compiler puts `$object:' at the
+ # start of each line; $object doesn't have directory information.
+ # Version 6 uses the directory in both cases.
+ stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
+ tmpdepfile="$stripped.u"
+ if test "$libtool" = yes; then
+ "$@" -Wc,-M
+ else
+ "$@" -M
+ fi
+ stat=$?
+
+ if test -f "$tmpdepfile"; then :
+ else
+ stripped=`echo "$stripped" | sed 's,^.*/,,'`
+ tmpdepfile="$stripped.u"
+ fi
+
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+
+ if test -f "$tmpdepfile"; then
+ outname="$stripped.o"
+ # Each line is of the form `foo.o: dependent.h'.
+ # Do two passes, one to just change these to
+ # `$object: dependent.h' and one to simply `dependent.h:'.
+ sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
+ sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
+ else
+ # The sourcefile does not contain any dependencies, so just
+ # store a dummy comment line, to avoid errors with the Makefile
+ # "include basename.Plo" scheme.
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+icc)
+ # Intel's C compiler understands `-MD -MF file'. However on
+ # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
+ # ICC 7.0 will fill foo.d with something like
+ # foo.o: sub/foo.c
+ # foo.o: sub/foo.h
+ # which is wrong. We want:
+ # sub/foo.o: sub/foo.c
+ # sub/foo.o: sub/foo.h
+ # sub/foo.c:
+ # sub/foo.h:
+ # ICC 7.1 will output
+ # foo.o: sub/foo.c sub/foo.h
+ # and will wrap long lines using \ :
+ # foo.o: sub/foo.c ... \
+ # sub/foo.h ... \
+ # ...
+
+ "$@" -MD -MF "$tmpdepfile"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ # Each line is of the form `foo.o: dependent.h',
+ # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
+ # Do two passes, one to just change these to
+ # `$object: dependent.h' and one to simply `dependent.h:'.
+ sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
+ # Some versions of the HPUX 10.20 sed can't process this invocation
+ # correctly. Breaking it into two sed invocations is a workaround.
+ sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
+ sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+hp2)
+ # The "hp" stanza above does not work with aCC (C++) and HP's ia64
+ # compilers, which have integrated preprocessors. The correct option
+ # to use with these is +Maked; it writes dependencies to a file named
+ # 'foo.d', which lands next to the object file, wherever that
+ # happens to be.
+ # Much of this is similar to the tru64 case; see comments there.
+ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+ test "x$dir" = "x$object" && dir=
+ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+ if test "$libtool" = yes; then
+ tmpdepfile1=$dir$base.d
+ tmpdepfile2=$dir.libs/$base.d
+ "$@" -Wc,+Maked
+ else
+ tmpdepfile1=$dir$base.d
+ tmpdepfile2=$dir$base.d
+ "$@" +Maked
+ fi
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile1" "$tmpdepfile2"
+ exit $stat
+ fi
+
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
+ do
+ test -f "$tmpdepfile" && break
+ done
+ if test -f "$tmpdepfile"; then
+ sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
+ # Add `dependent.h:' lines.
+ sed -ne '2,${; s/^ *//; s/ \\*$//; s/$/:/; p;}' "$tmpdepfile" >> "$depfile"
+ else
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile" "$tmpdepfile2"
+ ;;
+
+tru64)
+ # The Tru64 compiler uses -MD to generate dependencies as a side
+ # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
+ # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+ # dependencies in `foo.d' instead, so we check for that too.
+ # Subdirectories are respected.
+ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+ test "x$dir" = "x$object" && dir=
+ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+
+ if test "$libtool" = yes; then
+ # With Tru64 cc, shared objects can also be used to make a
+ # static library. This mechanism is used in libtool 1.4 series to
+ # handle both shared and static libraries in a single compilation.
+ # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
+ #
+ # With libtool 1.5 this exception was removed, and libtool now
+ # generates 2 separate objects for the 2 libraries. These two
+ # compilations output dependencies in $dir.libs/$base.o.d and
+ # in $dir$base.o.d. We have to check for both files, because
+ # one of the two compilations can be disabled. We should prefer
+ # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+ # automatically cleaned when .libs/ is deleted, while ignoring
+ # the former would cause a distcleancheck panic.
+ tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4
+ tmpdepfile2=$dir$base.o.d # libtool 1.5
+ tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5
+ tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504
+ "$@" -Wc,-MD
+ else
+ tmpdepfile1=$dir$base.o.d
+ tmpdepfile2=$dir$base.d
+ tmpdepfile3=$dir$base.d
+ tmpdepfile4=$dir$base.d
+ "$@" -MD
+ fi
+
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+ exit $stat
+ fi
+
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+ do
+ test -f "$tmpdepfile" && break
+ done
+ if test -f "$tmpdepfile"; then
+ sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+ # That's a tab and a space in the [].
+ sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+ else
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+#nosideeffect)
+ # This comment above is used by automake to tell side-effect
+ # dependency tracking mechanisms from slower ones.
+
+dashmstdout)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout, regardless of -o.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test $1 != '--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ # Remove `-o $object'.
+ IFS=" "
+ for arg
+ do
+ case $arg in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift # fnord
+ shift # $arg
+ ;;
+ esac
+ done
+
+ test -z "$dashmflag" && dashmflag=-M
+ # Require at least two characters before searching for `:'
+ # in the target name. This is to cope with DOS-style filenames:
+ # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
+ "$@" $dashmflag |
+ sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile"
+ rm -f "$depfile"
+ cat < "$tmpdepfile" > "$depfile"
+ tr ' ' '
+' < "$tmpdepfile" | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+dashXmstdout)
+ # This case only exists to satisfy depend.m4. It is never actually
+ # run, as this mode is specially recognized in the preamble.
+ exit 1
+ ;;
+
+makedepend)
+ "$@" || exit $?
+ # Remove any Libtool call
+ if test "$libtool" = yes; then
+ while test $1 != '--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+ # X makedepend
+ shift
+ cleared=no
+ for arg in "$@"; do
+ case $cleared in
+ no)
+ set ""; shift
+ cleared=yes ;;
+ esac
+ case "$arg" in
+ -D*|-I*)
+ set fnord "$@" "$arg"; shift ;;
+ # Strip any option that makedepend may not understand. Remove
+ # the object too, otherwise makedepend will parse it as a source file.
+ -*|$object)
+ ;;
+ *)
+ set fnord "$@" "$arg"; shift ;;
+ esac
+ done
+ obj_suffix="`echo $object | sed 's/^.*\././'`"
+ touch "$tmpdepfile"
+ ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
+ rm -f "$depfile"
+ cat < "$tmpdepfile" > "$depfile"
+ sed '1,2d' "$tmpdepfile" | tr ' ' '
+' | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile" "$tmpdepfile".bak
+ ;;
+
+cpp)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test $1 != '--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ # Remove `-o $object'.
+ IFS=" "
+ for arg
+ do
+ case $arg in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift # fnord
+ shift # $arg
+ ;;
+ esac
+ done
+
+ "$@" -E |
+ sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
+ sed '$ s: \\$::' > "$tmpdepfile"
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ cat < "$tmpdepfile" >> "$depfile"
+ sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+msvisualcpp)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout, regardless of -o,
+ # because we must use -o when running libtool.
+ "$@" || exit $?
+ IFS=" "
+ for arg
+ do
+ case "$arg" in
+ "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
+ set fnord "$@"
+ shift
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift
+ shift
+ ;;
+ esac
+ done
+ "$@" -E |
+ sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
+ echo " " >> "$depfile"
+ . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+none)
+ exec "$@"
+ ;;
+
+*)
+ echo "Unknown depmode $depmode" 1>&2
+ exit 1
+ ;;
+esac
+
+exit 0
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
--- /dev/null
+#!/bin/sh
+# install - install a program, script, or datafile
+
+scriptversion=2006-10-14.15
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.
+
+nl='
+'
+IFS=" "" $nl"
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+if test -z "$doit"; then
+ doit_exec=exec
+else
+ doit_exec=$doit
+fi
+
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+posix_glob=
+posix_mkdir=
+
+# Desired mode of installed file.
+mode=0755
+
+chmodcmd=$chmodprog
+chowncmd=
+chgrpcmd=
+stripcmd=
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=
+dst=
+dir_arg=
+dstarg=
+no_target_directory=
+
+usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+ or: $0 [OPTION]... SRCFILES... DIRECTORY
+ or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+ or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+-c (ignored)
+-d create directories instead of installing files.
+-g GROUP $chgrpprog installed files to GROUP.
+-m MODE $chmodprog installed files to MODE.
+-o USER $chownprog installed files to USER.
+-s $stripprog installed files.
+-t DIRECTORY install into DIRECTORY.
+-T report an error if DSTFILE is a directory.
+--help display this help and exit.
+--version display version info and exit.
+
+Environment variables override the default commands:
+ CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
+"
+
+while test $# -ne 0; do
+ case $1 in
+ -c) shift
+ continue;;
+
+ -d) dir_arg=true
+ shift
+ continue;;
+
+ -g) chgrpcmd="$chgrpprog $2"
+ shift
+ shift
+ continue;;
+
+ --help) echo "$usage"; exit $?;;
+
+ -m) mode=$2
+ shift
+ shift
+ case $mode in
+ *' '* | *' '* | *'
+'* | *'*'* | *'?'* | *'['*)
+ echo "$0: invalid mode: $mode" >&2
+ exit 1;;
+ esac
+ continue;;
+
+ -o) chowncmd="$chownprog $2"
+ shift
+ shift
+ continue;;
+
+ -s) stripcmd=$stripprog
+ shift
+ continue;;
+
+ -t) dstarg=$2
+ shift
+ shift
+ continue;;
+
+ -T) no_target_directory=true
+ shift
+ continue;;
+
+ --version) echo "$0 $scriptversion"; exit $?;;
+
+ --) shift
+ break;;
+
+ -*) echo "$0: invalid option: $1" >&2
+ exit 1;;
+
+ *) break;;
+ esac
+done
+
+if test $# -ne 0 && test -z "$dir_arg$dstarg"; then
+ # When -d is used, all remaining arguments are directories to create.
+ # When -t is used, the destination is already specified.
+ # Otherwise, the last argument is the destination. Remove it from $@.
+ for arg
+ do
+ if test -n "$dstarg"; then
+ # $@ is not empty: it contains at least $arg.
+ set fnord "$@" "$dstarg"
+ shift # fnord
+ fi
+ shift # arg
+ dstarg=$arg
+ done
+fi
+
+if test $# -eq 0; then
+ if test -z "$dir_arg"; then
+ echo "$0: no input file specified." >&2
+ exit 1
+ fi
+ # It's OK to call `install-sh -d' without argument.
+ # This can happen when creating conditional directories.
+ exit 0
+fi
+
+if test -z "$dir_arg"; then
+ trap '(exit $?); exit' 1 2 13 15
+
+ # Set umask so as not to create temps with too-generous modes.
+ # However, 'strip' requires both read and write access to temps.
+ case $mode in
+ # Optimize common cases.
+ *644) cp_umask=133;;
+ *755) cp_umask=22;;
+
+ *[0-7])
+ if test -z "$stripcmd"; then
+ u_plus_rw=
+ else
+ u_plus_rw='% 200'
+ fi
+ cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
+ *)
+ if test -z "$stripcmd"; then
+ u_plus_rw=
+ else
+ u_plus_rw=,u+rw
+ fi
+ cp_umask=$mode$u_plus_rw;;
+ esac
+fi
+
+for src
+do
+ # Protect names starting with `-'.
+ case $src in
+ -*) src=./$src ;;
+ esac
+
+ if test -n "$dir_arg"; then
+ dst=$src
+ dstdir=$dst
+ test -d "$dstdir"
+ dstdir_status=$?
+ else
+
+ # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+ # might cause directories to be created, which would be especially bad
+ # if $src (and thus $dsttmp) contains '*'.
+ if test ! -f "$src" && test ! -d "$src"; then
+ echo "$0: $src does not exist." >&2
+ exit 1
+ fi
+
+ if test -z "$dstarg"; then
+ echo "$0: no destination specified." >&2
+ exit 1
+ fi
+
+ dst=$dstarg
+ # Protect names starting with `-'.
+ case $dst in
+ -*) dst=./$dst ;;
+ esac
+
+ # If destination is a directory, append the input filename; won't work
+ # if double slashes aren't ignored.
+ if test -d "$dst"; then
+ if test -n "$no_target_directory"; then
+ echo "$0: $dstarg: Is a directory" >&2
+ exit 1
+ fi
+ dstdir=$dst
+ dst=$dstdir/`basename "$src"`
+ dstdir_status=0
+ else
+ # Prefer dirname, but fall back on a substitute if dirname fails.
+ dstdir=`
+ (dirname "$dst") 2>/dev/null ||
+ expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$dst" : 'X\(//\)[^/]' \| \
+ X"$dst" : 'X\(//\)$' \| \
+ X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
+ echo X"$dst" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'
+ `
+
+ test -d "$dstdir"
+ dstdir_status=$?
+ fi
+ fi
+
+ obsolete_mkdir_used=false
+
+ if test $dstdir_status != 0; then
+ case $posix_mkdir in
+ '')
+ # Create intermediate dirs using mode 755 as modified by the umask.
+ # This is like FreeBSD 'install' as of 1997-10-28.
+ umask=`umask`
+ case $stripcmd.$umask in
+ # Optimize common cases.
+ *[2367][2367]) mkdir_umask=$umask;;
+ .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+
+ *[0-7])
+ mkdir_umask=`expr $umask + 22 \
+ - $umask % 100 % 40 + $umask % 20 \
+ - $umask % 10 % 4 + $umask % 2
+ `;;
+ *) mkdir_umask=$umask,go-w;;
+ esac
+
+ # With -d, create the new directory with the user-specified mode.
+ # Otherwise, rely on $mkdir_umask.
+ if test -n "$dir_arg"; then
+ mkdir_mode=-m$mode
+ else
+ mkdir_mode=
+ fi
+
+ posix_mkdir=false
+ case $umask in
+ *[123567][0-7][0-7])
+ # POSIX mkdir -p sets u+wx bits regardless of umask, which
+ # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+ ;;
+ *)
+ tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+ trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+ if (umask $mkdir_umask &&
+ exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+ then
+ if test -z "$dir_arg" || {
+ # Check for POSIX incompatibilities with -m.
+ # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+ # other-writeable bit of parent directory when it shouldn't.
+ # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+ ls_ld_tmpdir=`ls -ld "$tmpdir"`
+ case $ls_ld_tmpdir in
+ d????-?r-*) different_mode=700;;
+ d????-?--*) different_mode=755;;
+ *) false;;
+ esac &&
+ $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+ ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+ test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+ }
+ }
+ then posix_mkdir=:
+ fi
+ rmdir "$tmpdir/d" "$tmpdir"
+ else
+ # Remove any dirs left behind by ancient mkdir implementations.
+ rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+ fi
+ trap '' 0;;
+ esac;;
+ esac
+
+ if
+ $posix_mkdir && (
+ umask $mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+ )
+ then :
+ else
+
+ # The umask is ridiculous, or mkdir does not conform to POSIX,
+ # or it failed possibly due to a race condition. Create the
+ # directory the slow way, step by step, checking for races as we go.
+
+ case $dstdir in
+ /*) prefix=/ ;;
+ -*) prefix=./ ;;
+ *) prefix= ;;
+ esac
+
+ case $posix_glob in
+ '')
+ if (set -f) 2>/dev/null; then
+ posix_glob=true
+ else
+ posix_glob=false
+ fi ;;
+ esac
+
+ oIFS=$IFS
+ IFS=/
+ $posix_glob && set -f
+ set fnord $dstdir
+ shift
+ $posix_glob && set +f
+ IFS=$oIFS
+
+ prefixes=
+
+ for d
+ do
+ test -z "$d" && continue
+
+ prefix=$prefix$d
+ if test -d "$prefix"; then
+ prefixes=
+ else
+ if $posix_mkdir; then
+ (umask=$mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+ # Don't fail if two instances are running concurrently.
+ test -d "$prefix" || exit 1
+ else
+ case $prefix in
+ *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) qprefix=$prefix;;
+ esac
+ prefixes="$prefixes '$qprefix'"
+ fi
+ fi
+ prefix=$prefix/
+ done
+
+ if test -n "$prefixes"; then
+ # Don't fail if two instances are running concurrently.
+ (umask $mkdir_umask &&
+ eval "\$doit_exec \$mkdirprog $prefixes") ||
+ test -d "$dstdir" || exit 1
+ obsolete_mkdir_used=true
+ fi
+ fi
+ fi
+
+ if test -n "$dir_arg"; then
+ { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+ { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+ { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+ test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
+ else
+
+ # Make a couple of temp file names in the proper directory.
+ dsttmp=$dstdir/_inst.$$_
+ rmtmp=$dstdir/_rm.$$_
+
+ # Trap to clean up those temp files at exit.
+ trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+
+ # Copy the file name to the temp name.
+ (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
+
+ # and set any options; do chmod last to preserve setuid bits.
+ #
+ # If any of these fail, we abort the whole thing. If we want to
+ # ignore errors from any of these, just make sure not to ignore
+ # errors from the above "$doit $cpprog $src $dsttmp" command.
+ #
+ { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
+ && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
+ && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
+ && { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+
+ # Now rename the file to the real destination.
+ { $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null \
+ || {
+ # The rename failed, perhaps because mv can't rename something else
+ # to itself, or perhaps because mv is so ancient that it does not
+ # support -f.
+
+ # Now remove or move aside any old file at destination location.
+ # We try this two ways since rm can't unlink itself on some
+ # systems and the destination file might be busy for other
+ # reasons. In this case, the final cleanup might fail but the new
+ # file should still install successfully.
+ {
+ if test -f "$dst"; then
+ $doit $rmcmd -f "$dst" 2>/dev/null \
+ || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null \
+ && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }; }\
+ || {
+ echo "$0: cannot unlink or rename $dst" >&2
+ (exit 1); exit 1
+ }
+ else
+ :
+ fi
+ } &&
+
+ # Now rename the file to the real destination.
+ $doit $mvcmd "$dsttmp" "$dst"
+ }
+ } || exit 1
+
+ trap '' 0
+ fi
+done
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
--- /dev/null
+#! /bin/sh
+# Common stub for a few missing GNU programs while installing.
+
+scriptversion=2006-05-10.23
+
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006
+# Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+ echo 1>&2 "Try \`$0 --help' for more information"
+ exit 1
+fi
+
+run=:
+sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
+sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
+
+# In the cases where this matters, `missing' is being run in the
+# srcdir already.
+if test -f configure.ac; then
+ configure_ac=configure.ac
+else
+ configure_ac=configure.in
+fi
+
+msg="missing on your system"
+
+case $1 in
+--run)
+ # Try to run requested program, and just exit if it succeeds.
+ run=
+ shift
+ "$@" && exit 0
+ # Exit code 63 means version mismatch. This often happens
+ # when the user try to use an ancient version of a tool on
+ # a file that requires a minimum version. In this case we
+ # we should proceed has if the program had been absent, or
+ # if --run hadn't been passed.
+ if test $? = 63; then
+ run=:
+ msg="probably too old"
+ fi
+ ;;
+
+ -h|--h|--he|--hel|--help)
+ echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
+
+Options:
+ -h, --help display this help and exit
+ -v, --version output version information and exit
+ --run try to run the given command, and emulate it if it fails
+
+Supported PROGRAM values:
+ aclocal touch file \`aclocal.m4'
+ autoconf touch file \`configure'
+ autoheader touch file \`config.h.in'
+ autom4te touch the output file, or create a stub one
+ automake touch all \`Makefile.in' files
+ bison create \`y.tab.[ch]', if possible, from existing .[ch]
+ flex create \`lex.yy.c', if possible, from existing .c
+ help2man touch the output file
+ lex create \`lex.yy.c', if possible, from existing .c
+ makeinfo touch the output file
+ tar try tar, gnutar, gtar, then tar without non-portable flags
+ yacc create \`y.tab.[ch]', if possible, from existing .[ch]
+
+Send bug reports to <bug-automake@gnu.org>."
+ exit $?
+ ;;
+
+ -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+ echo "missing $scriptversion (GNU Automake)"
+ exit $?
+ ;;
+
+ -*)
+ echo 1>&2 "$0: Unknown \`$1' option"
+ echo 1>&2 "Try \`$0 --help' for more information"
+ exit 1
+ ;;
+
+esac
+
+# Now exit if we have it, but it failed. Also exit now if we
+# don't have it and --version was passed (most likely to detect
+# the program).
+case $1 in
+ lex|yacc)
+ # Not GNU programs, they don't have --version.
+ ;;
+
+ tar)
+ if test -n "$run"; then
+ echo 1>&2 "ERROR: \`tar' requires --run"
+ exit 1
+ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+ exit 1
+ fi
+ ;;
+
+ *)
+ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+ # We have it, but it failed.
+ exit 1
+ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+ # Could not run --version or --help. This is probably someone
+ # running `$TOOL --version' or `$TOOL --help' to check whether
+ # $TOOL exists and not knowing $TOOL uses missing.
+ exit 1
+ fi
+ ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case $1 in
+ aclocal*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`acinclude.m4' or \`${configure_ac}'. You might want
+ to install the \`Automake' and \`Perl' packages. Grab them from
+ any GNU archive site."
+ touch aclocal.m4
+ ;;
+
+ autoconf)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`${configure_ac}'. You might want to install the
+ \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
+ archive site."
+ touch configure
+ ;;
+
+ autoheader)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`acconfig.h' or \`${configure_ac}'. You might want
+ to install the \`Autoconf' and \`GNU m4' packages. Grab them
+ from any GNU archive site."
+ files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
+ test -z "$files" && files="config.h"
+ touch_files=
+ for f in $files; do
+ case $f in
+ *:*) touch_files="$touch_files "`echo "$f" |
+ sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+ *) touch_files="$touch_files $f.in";;
+ esac
+ done
+ touch $touch_files
+ ;;
+
+ automake*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
+ You might want to install the \`Automake' and \`Perl' packages.
+ Grab them from any GNU archive site."
+ find . -type f -name Makefile.am -print |
+ sed 's/\.am$/.in/' |
+ while read f; do touch "$f"; done
+ ;;
+
+ autom4te)
+ echo 1>&2 "\
+WARNING: \`$1' is needed, but is $msg.
+ You might have modified some files without having the
+ proper tools for further handling them.
+ You can get \`$1' as part of \`Autoconf' from any GNU
+ archive site."
+
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -f "$file"; then
+ touch $file
+ else
+ test -z "$file" || exec >$file
+ echo "#! /bin/sh"
+ echo "# Created by GNU Automake missing as a replacement of"
+ echo "# $ $@"
+ echo "exit 0"
+ chmod +x $file
+ exit 1
+ fi
+ ;;
+
+ bison|yacc)
+ echo 1>&2 "\
+WARNING: \`$1' $msg. You should only need it if
+ you modified a \`.y' file. You may need the \`Bison' package
+ in order for those modifications to take effect. You can get
+ \`Bison' from any GNU archive site."
+ rm -f y.tab.c y.tab.h
+ if test $# -ne 1; then
+ eval LASTARG="\${$#}"
+ case $LASTARG in
+ *.y)
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+ if test -f "$SRCFILE"; then
+ cp "$SRCFILE" y.tab.c
+ fi
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+ if test -f "$SRCFILE"; then
+ cp "$SRCFILE" y.tab.h
+ fi
+ ;;
+ esac
+ fi
+ if test ! -f y.tab.h; then
+ echo >y.tab.h
+ fi
+ if test ! -f y.tab.c; then
+ echo 'main() { return 0; }' >y.tab.c
+ fi
+ ;;
+
+ lex|flex)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a \`.l' file. You may need the \`Flex' package
+ in order for those modifications to take effect. You can get
+ \`Flex' from any GNU archive site."
+ rm -f lex.yy.c
+ if test $# -ne 1; then
+ eval LASTARG="\${$#}"
+ case $LASTARG in
+ *.l)
+ SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+ if test -f "$SRCFILE"; then
+ cp "$SRCFILE" lex.yy.c
+ fi
+ ;;
+ esac
+ fi
+ if test ! -f lex.yy.c; then
+ echo 'main() { return 0; }' >lex.yy.c
+ fi
+ ;;
+
+ help2man)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a dependency of a manual page. You may need the
+ \`Help2man' package in order for those modifications to take
+ effect. You can get \`Help2man' from any GNU archive site."
+
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -f "$file"; then
+ touch $file
+ else
+ test -z "$file" || exec >$file
+ echo ".ab help2man is required to generate this page"
+ exit 1
+ fi
+ ;;
+
+ makeinfo)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a \`.texi' or \`.texinfo' file, or any other file
+ indirectly affecting the aspect of the manual. The spurious
+ call might also be the consequence of using a buggy \`make' (AIX,
+ DU, IRIX). You might want to install the \`Texinfo' package or
+ the \`GNU make' package. Grab either from any GNU archive site."
+ # The file to touch is that specified with -o ...
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -z "$file"; then
+ # ... or it is the one specified with @setfilename ...
+ infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+ file=`sed -n '
+ /^@setfilename/{
+ s/.* \([^ ]*\) *$/\1/
+ p
+ q
+ }' $infile`
+ # ... or it is derived from the source name (dir/f.texi becomes f.info)
+ test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
+ fi
+ # If the file does not exist, the user really needs makeinfo;
+ # let's fail without touching anything.
+ test -f $file || exit 1
+ touch $file
+ ;;
+
+ tar)
+ shift
+
+ # We have already tried tar in the generic part.
+ # Look for gnutar/gtar before invocation to avoid ugly error
+ # messages.
+ if (gnutar --version > /dev/null 2>&1); then
+ gnutar "$@" && exit 0
+ fi
+ if (gtar --version > /dev/null 2>&1); then
+ gtar "$@" && exit 0
+ fi
+ firstarg="$1"
+ if shift; then
+ case $firstarg in
+ *o*)
+ firstarg=`echo "$firstarg" | sed s/o//`
+ tar "$firstarg" "$@" && exit 0
+ ;;
+ esac
+ case $firstarg in
+ *h*)
+ firstarg=`echo "$firstarg" | sed s/h//`
+ tar "$firstarg" "$@" && exit 0
+ ;;
+ esac
+ fi
+
+ echo 1>&2 "\
+WARNING: I can't seem to be able to run \`tar' with the given arguments.
+ You may want to install GNU tar or Free paxutils, or check the
+ command line arguments."
+ exit 1
+ ;;
+
+ *)
+ echo 1>&2 "\
+WARNING: \`$1' is needed, and is $msg.
+ You might have modified some files without having the
+ proper tools for further handling them. Check the \`README' file,
+ it often tells you about the needed prerequisites for installing
+ this package. You may also peek at any GNU archive site, in case
+ some other package would contain this missing \`$1' program."
+ exit 1
+ ;;
+esac
+
+exit 0
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
--- /dev/null
+
+noinst_LIBRARIES = libparser.a
+
+libparser_a_SOURCES = \
+ parser.c parser.h lmp.c hci.c \
+ l2cap.c sdp.c sdp.h rfcomm.c rfcomm.h \
+ bnep.c cmtp.c hidp.c hcrp.c avdtp.c avctp.c \
+ obex.c capi.c ppp.c tcpip.c ericsson.c csr.c bpa.c
+
+AM_CFLAGS = @BLUEZ_CFLAGS@
+
+MAINTAINERCLEANFILES = Makefile.in
--- /dev/null
+# Makefile.in generated by automake 1.10 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = parser
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
+ $(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+LIBRARIES = $(noinst_LIBRARIES)
+AR = ar
+ARFLAGS = cru
+libparser_a_AR = $(AR) $(ARFLAGS)
+libparser_a_LIBADD =
+am_libparser_a_OBJECTS = parser.$(OBJEXT) lmp.$(OBJEXT) hci.$(OBJEXT) \
+ l2cap.$(OBJEXT) sdp.$(OBJEXT) rfcomm.$(OBJEXT) bnep.$(OBJEXT) \
+ cmtp.$(OBJEXT) hidp.$(OBJEXT) hcrp.$(OBJEXT) avdtp.$(OBJEXT) \
+ avctp.$(OBJEXT) obex.$(OBJEXT) capi.$(OBJEXT) ppp.$(OBJEXT) \
+ tcpip.$(OBJEXT) ericsson.$(OBJEXT) csr.$(OBJEXT) bpa.$(OBJEXT)
+libparser_a_OBJECTS = $(am_libparser_a_OBJECTS)
+DEFAULT_INCLUDES = -I. -I$(top_builddir)@am__isrc@
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+SOURCES = $(libparser_a_SOURCES)
+DIST_SOURCES = $(libparser_a_SOURCES)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BLUEZ_CFLAGS = @BLUEZ_CFLAGS@
+BLUEZ_LIBS = @BLUEZ_LIBS@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EXEEXT = @EXEEXT@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+RANLIB = @RANLIB@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build_alias = @build_alias@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host_alias = @host_alias@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+noinst_LIBRARIES = libparser.a
+libparser_a_SOURCES = \
+ parser.c parser.h lmp.c hci.c \
+ l2cap.c sdp.c sdp.h rfcomm.c rfcomm.h \
+ bnep.c cmtp.c hidp.c hcrp.c avdtp.c avctp.c \
+ obex.c capi.c ppp.c tcpip.c ericsson.c csr.c bpa.c
+
+AM_CFLAGS = @BLUEZ_CFLAGS@
+MAINTAINERCLEANFILES = Makefile.in
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .o .obj
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu parser/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --gnu parser/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+clean-noinstLIBRARIES:
+ -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
+libparser.a: $(libparser_a_OBJECTS) $(libparser_a_DEPENDENCIES)
+ -rm -f libparser.a
+ $(libparser_a_AR) libparser.a $(libparser_a_OBJECTS) $(libparser_a_LIBADD)
+ $(RANLIB) libparser.a
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT)
+
+distclean-compile:
+ -rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/avctp.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/avdtp.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/bnep.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/bpa.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/capi.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cmtp.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/csr.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ericsson.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/hci.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/hcrp.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/hidp.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/l2cap.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/lmp.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/obex.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/parser.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ppp.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rfcomm.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sdp.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tcpip.Po@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c $<
+
+.c.obj:
+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile $(LIBRARIES)
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+ -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
+clean: clean-am
+
+clean-am: clean-generic clean-noinstLIBRARIES mostlyclean-am
+
+distclean: distclean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-info: install-info-am
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-ps: install-ps-am
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
+ clean-noinstLIBRARIES ctags distclean distclean-compile \
+ distclean-generic distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-dvi install-dvi-am install-exec \
+ install-exec-am install-html install-html-am install-info \
+ install-info-am install-man install-pdf install-pdf-am \
+ install-ps install-ps-am install-strip installcheck \
+ installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-compile \
+ mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \
+ uninstall-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
--- /dev/null
+/*
+ *
+ * BlueZ - Bluetooth protocol stack for Linux
+ *
+ * Copyright (C) 2004-2007 Marcel Holtmann <marcel@holtmann.org>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include <stdio.h>
+#include <errno.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include <sys/types.h>
+#include <netinet/in.h>
+
+#include "parser.h"
+
+void avctp_dump(int level, struct frame *frm)
+{
+ p_indent(level, frm);
+ printf("AVCTP:\n");
+
+ raw_dump(level, frm);
+}
--- /dev/null
+/*
+ *
+ * BlueZ - Bluetooth protocol stack for Linux
+ *
+ * Copyright (C) 2004-2007 Marcel Holtmann <marcel@holtmann.org>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include <stdio.h>
+#include <errno.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include <sys/types.h>
+#include <netinet/in.h>
+
+#include "parser.h"
+
+static char *si2str(uint8_t si)
+{
+ switch (si & 0x7f) {
+ case 0x01:
+ return "Discover";
+ case 0x02:
+ return "Capabilities";
+ case 0x03:
+ return "Set config";
+ case 0x04:
+ return "Get config";
+ case 0x05:
+ return "Reconfigure";
+ case 0x06:
+ return "Open";
+ case 0x07:
+ return "Start";
+ case 0x08:
+ return "Close";
+ case 0x09:
+ return "Suspend";
+ case 0x0a:
+ return "Abort";
+ case 0x0b:
+ return "Security";
+ default:
+ return "Unknown";
+ }
+}
+
+static char *pt2str(uint8_t hdr)
+{
+ switch (hdr & 0x0c) {
+ case 0x00:
+ return "Single";
+ case 0x04:
+ return "Start";
+ case 0x08:
+ return "Cont";
+ case 0x0c:
+ return "End";
+ default:
+ return "Unk";
+ }
+}
+
+static char *mt2str(uint8_t hdr)
+{
+ switch (hdr & 0x03) {
+ case 0x00:
+ return "cmd";
+ case 0x02:
+ return "rsp";
+ case 0x03:
+ return "rej";
+ default:
+ return "rfd";
+ }
+}
+
+static char *media2str(uint8_t type)
+{
+ switch (type) {
+ case 0:
+ return "Audio";
+ case 1:
+ return "Video";
+ case 2:
+ return "Multimedia";
+ default:
+ return "Reserved";
+ }
+}
+
+static char *codec2str(uint8_t type, uint8_t codec)
+{
+ switch (type) {
+ case 0:
+ switch (codec) {
+ case 0:
+ return "SBC";
+ case 1:
+ return "MPEG-1,2 Audio";
+ case 2:
+ return "MPEG-2,4 AAC";
+ case 4:
+ return "ATRAC family";
+ case 255:
+ return "non-A2DP";
+ default:
+ return "Reserved";
+ }
+ break;
+ case 1:
+ switch (codec) {
+ case 1:
+ return "H.263 baseline";
+ case 2:
+ return "MPEG-4 Visual Simple Profile";
+ case 3:
+ return "H.263 profile 3";
+ case 4:
+ return "H.263 profile 8";
+ case 255:
+ return "Non-VDP";
+ default:
+ return "Reserved";
+ }
+ break;
+ }
+ return "Unknown";
+}
+
+static char *cat2str(uint8_t cat)
+{
+ switch (cat) {
+ case 1:
+ return "Media Transport";
+ case 2:
+ return "Reporting";
+ case 3:
+ return "Recovery";
+ case 4:
+ return "Content Protection";
+ case 5:
+ return "Header Compression";
+ case 6:
+ return "Multiplexing";
+ case 7:
+ return "Media Codec";
+ default:
+ return "Reserved";
+ }
+}
+
+static void errorcode(int level, struct frame *frm)
+{
+ uint8_t code;
+
+ p_indent(level, frm);
+ code = get_u8(frm);
+ printf("Error code %d\n", code);
+}
+
+static void acp_seid(int level, struct frame *frm)
+{
+ uint8_t seid;
+
+ p_indent(level, frm);
+ seid = get_u8(frm);
+ printf("ACP SEID %d\n", seid >> 2);
+}
+
+static void acp_int_seid(int level, struct frame *frm)
+{
+ uint8_t acp_seid, int_seid;
+
+ p_indent(level, frm);
+ acp_seid = get_u8(frm);
+ int_seid = get_u8(frm);
+ printf("ACP SEID %d - INT SEID %d\n", acp_seid >> 2, int_seid >> 2);
+}
+
+static void capabilities(int level, struct frame *frm)
+{
+ uint8_t cat, len;
+
+ while (frm->len > 1) {
+ p_indent(level, frm);
+ cat = get_u8(frm);
+ len = get_u8(frm);
+
+ if (cat == 7) {
+ uint8_t type, codec, tmp;
+
+ type = get_u8(frm);
+ codec = get_u8(frm);
+
+ printf("%s - %s\n", cat2str(cat), codec2str(type, codec));
+
+ switch (codec) {
+ case 0:
+ tmp = get_u8(frm);
+ p_indent(level + 1, frm);
+ if (tmp & 0x80)
+ printf("16kHz ");
+ if (tmp & 0x40)
+ printf("32kHz ");
+ if (tmp & 0x20)
+ printf("44.1kHz ");
+ if (tmp & 0x10)
+ printf("48kHz ");
+ printf("\n");
+ p_indent(level + 1, frm);
+ if (tmp & 0x08)
+ printf("Mono ");
+ if (tmp & 0x04)
+ printf("DualChannel ");
+ if (tmp & 0x02)
+ printf("Stereo ");
+ if (tmp & 0x01)
+ printf("JointStereo ");
+ printf("\n");
+ tmp = get_u8(frm);
+ p_indent(level + 1, frm);
+ if (tmp & 0x80)
+ printf("4 ");
+ if (tmp & 0x40)
+ printf("8 ");
+ if (tmp & 0x20)
+ printf("12 ");
+ if (tmp & 0x10)
+ printf("16 ");
+ printf("Blocks\n");
+ p_indent(level + 1, frm);
+ if (tmp & 0x08)
+ printf("4 ");
+ if (tmp & 0x04)
+ printf("8 ");
+ printf("Subbands\n");
+ p_indent(level + 1, frm);
+ if (tmp & 0x02)
+ printf("SNR ");
+ if (tmp & 0x01)
+ printf("Loudness ");
+ printf("\n");
+ tmp = get_u8(frm);
+ p_indent(level + 1, frm);
+ printf("Bitpool Range %d-%d\n", tmp, get_u8(frm));
+ break;
+ default:
+ hex_dump(level + 1, frm, len - 2);
+ frm->ptr += (len - 2);
+ frm->len -= (len - 2);
+ break;
+ }
+ } else {
+ printf("%s\n", cat2str(cat));
+ hex_dump(level + 1, frm, len);
+
+ frm->ptr += len;
+ frm->len -= len;
+ }
+ }
+}
+
+static inline void discover(int level, uint8_t hdr, struct frame *frm)
+{
+ uint8_t seid, type;
+
+ switch (hdr & 0x03) {
+ case 0x02:
+ while (frm->len > 1) {
+ p_indent(level, frm);
+ seid = get_u8(frm);
+ type = get_u8(frm);
+ printf("ACP SEID %d - %s %s%s\n",
+ seid >> 2, media2str(type >> 4),
+ type & 0x08 ? "Sink" : "Source",
+ seid & 0x02 ? " (InUse)" : "");
+ }
+ break;
+ case 0x03:
+ errorcode(level, frm);
+ break;
+ }
+}
+
+static inline void get_capabilities(int level, uint8_t hdr, struct frame *frm)
+{
+ switch (hdr & 0x03) {
+ case 0x00:
+ acp_seid(level, frm);
+ break;
+ case 0x02:
+ capabilities(level, frm);
+ break;
+ case 0x03:
+ errorcode(level, frm);
+ break;
+ }
+}
+
+static inline void set_configuration(int level, uint8_t hdr, struct frame *frm)
+{
+ uint8_t cat;
+
+ switch (hdr & 0x03) {
+ case 0x00:
+ acp_int_seid(level, frm);
+ capabilities(level, frm);
+ break;
+ case 0x03:
+ p_indent(level, frm);
+ cat = get_u8(frm);
+ printf("%s\n", cat2str(cat));
+ errorcode(level, frm);
+ break;
+ }
+}
+
+static inline void get_configuration(int level, uint8_t hdr, struct frame *frm)
+{
+ switch (hdr & 0x03) {
+ case 0x00:
+ acp_seid(level, frm);
+ case 0x02:
+ capabilities(level, frm);
+ break;
+ case 0x03:
+ errorcode(level, frm);
+ break;
+ }
+}
+
+static inline void reconfigure(int level, uint8_t hdr, struct frame *frm)
+{
+ uint8_t cat;
+
+ switch (hdr & 0x03) {
+ case 0x00:
+ acp_seid(level, frm);
+ capabilities(level, frm);
+ break;
+ case 0x03:
+ p_indent(level, frm);
+ cat = get_u8(frm);
+ printf("%s\n", cat2str(cat));
+ errorcode(level, frm);
+ break;
+ }
+}
+
+static inline void open_close_stream(int level, uint8_t hdr, struct frame *frm)
+{
+ switch (hdr & 0x03) {
+ case 0x00:
+ acp_seid(level, frm);
+ break;
+ case 0x03:
+ errorcode(level, frm);
+ break;
+ }
+}
+
+static inline void start_suspend_stream(int level, uint8_t hdr, struct frame *frm)
+{
+ switch (hdr & 0x03) {
+ case 0x00:
+ while (frm->len > 0)
+ acp_seid(level, frm);
+ break;
+ case 0x03:
+ acp_seid(level, frm);
+ errorcode(level, frm);
+ break;
+ }
+}
+
+static inline void abort_streaming(int level, uint8_t hdr, struct frame *frm)
+{
+ switch (hdr & 0x03) {
+ case 0x00:
+ acp_seid(level, frm);
+ break;
+ }
+}
+
+static inline void security(int level, uint8_t hdr, struct frame *frm)
+{
+ switch (hdr & 0x03) {
+ case 0x00:
+ acp_seid(level, frm);
+ case 0x02:
+ hex_dump(level + 1, frm, frm->len);
+ frm->ptr += frm->len;
+ frm->len = 0;
+ break;
+ case 0x03:
+ errorcode(level, frm);
+ break;
+ }
+}
+
+void avdtp_dump(int level, struct frame *frm)
+{
+ uint8_t hdr, sid, nsp, type;
+ uint16_t seqn;
+ uint32_t time, ssrc;
+
+ switch (frm->num) {
+ case 1:
+ p_indent(level, frm);
+ hdr = get_u8(frm);
+
+ nsp = (hdr & 0x0c) == 0x04 ? get_u8(frm) : 0;
+ sid = hdr & 0x08 ? 0x00 : get_u8(frm);
+
+ printf("AVDTP(s): %s %s: transaction %d\n",
+ hdr & 0x08 ? pt2str(hdr) : si2str(sid), mt2str(hdr), hdr >> 4);
+
+ switch (sid & 0x7f) {
+ case 0x01:
+ discover(level + 1, hdr, frm);
+ break;
+ case 0x02:
+ get_capabilities(level + 1, hdr, frm);
+ break;
+ case 0x03:
+ set_configuration(level + 1, hdr, frm);
+ break;
+ case 0x04:
+ get_configuration(level + 1, hdr, frm);
+ break;
+ case 0x05:
+ reconfigure(level + 1, hdr, frm);
+ break;
+ case 0x06:
+ open_close_stream(level + 1, hdr, frm);
+ break;
+ case 0x07:
+ start_suspend_stream(level + 1, hdr, frm);
+ break;
+ case 0x08:
+ open_close_stream(level + 1, hdr, frm);
+ break;
+ case 0x09:
+ start_suspend_stream(level + 1, hdr, frm);
+ break;
+ case 0x0a:
+ abort_streaming(level + 1, hdr, frm);
+ break;
+ case 0x0b:
+ security(level + 1, hdr, frm);
+ break;
+ }
+
+ break;
+
+ case 2:
+ p_indent(level, frm);
+ hdr = get_u8(frm);
+ type = get_u8(frm);
+ seqn = get_u16(frm);
+ time = get_u32(frm);
+ ssrc = get_u32(frm);
+
+ printf("AVDTP(m): ver %d %s%scc %d %spt %d seqn %d time %d ssrc %d\n",
+ hdr >> 6, hdr & 0x20 ? "pad " : "", hdr & 0x10 ? "ext " : "",
+ hdr & 0xf, type & 0x80 ? "mark " : "", type & 0x7f, seqn, time, ssrc);
+ break;
+ }
+
+ raw_dump(level, frm);
+}
--- /dev/null
+/*
+ *
+ * BlueZ - Bluetooth protocol stack for Linux
+ *
+ * Copyright (C) 2002-2003 Takashi Sasai <sasai@sm.sony.co.jp>
+ * Copyright (C) 2003-2007 Marcel Holtmann <marcel@holtmann.org>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include <stdio.h>
+#include <errno.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/types.h>
+
+#include <linux/if_ether.h>
+
+#include "parser.h"
+
+#ifndef ETHERTYPE_ARP
+#define ETHERTYPE_ARP ETH_P_ARP
+#endif
+#ifndef ETHERTYPE_REVARP
+#define ETHERTYPE_REVARP ETH_P_RARP
+#endif
+#ifndef ETHERTYPE_IP
+#define ETHERTYPE_IP ETH_P_IP
+#endif
+
+/* BNEP Type */
+#define BNEP_GENERAL_ETHERNET 0x00
+#define BNEP_CONTROL 0x01
+#define BNEP_COMPRESSED_ETHERNET 0x02
+#define BNEP_COMPRESSED_ETHERNET_SOURCE_ONLY 0x03
+#define BNEP_COMPRESSED_ETHERNET_DEST_ONLY 0x04
+
+/* BNEP Control Packet Type */
+#define BNEP_CONTROL_COMMAND_NOT_UNDERSTOOD 0x00
+#define BNEP_SETUP_CONNECTION_REQUEST_MSG 0x01
+#define BNEP_SETUP_CONNECTION_RESPONSE_MSG 0x02
+#define BNEP_FILTER_NET_TYPE_SET_MSG 0x03
+#define BNEP_FILTER_NET_TYPE_RESPONSE_MSG 0x04
+#define BNEP_FILTER_MULT_ADDR_SET_MSG 0x05
+#define BNEP_FILTER_MULT_ADDR_RESPONSE_MSG 0x06
+
+/* BNEP Extension Type */
+#define BNEP_EXTENSION_CONTROL 0x00
+
+#ifndef ETHERTYPE_IPV6
+#define ETHERTYPE_IPV6 ETH_P_IPV6
+#endif
+
+static char *get_macaddr(struct frame *frm)
+{
+ static char str[20];
+ unsigned char *buf = frm->ptr;
+
+ sprintf(str, "%02x:%02x:%02x:%02x:%02x:%02x",
+ buf[0], buf[1], buf[2], buf[3], buf[4], buf[5]);
+
+ frm->ptr += 6;
+ frm->len -= 6;
+
+ return str;
+}
+
+static void bnep_control(int level, struct frame *frm, int header_length)
+{
+ uint8_t uuid_size;
+ int i, length;
+ char *s;
+ uint32_t uuid = 0;
+ uint8_t type = get_u8(frm);
+
+ p_indent(++level, frm);
+ switch (type) {
+ case BNEP_CONTROL_COMMAND_NOT_UNDERSTOOD:
+ printf("Not Understood(0x%02x) type 0x%02x\n", type, get_u8(frm));
+ break;
+
+ case BNEP_SETUP_CONNECTION_REQUEST_MSG:
+ uuid_size = get_u8(frm);
+ printf("Setup Req(0x%02x) size 0x%02x ", type, uuid_size);
+ switch (uuid_size) {
+ case 2:
+ uuid = get_u16(frm);
+ printf("dst 0x%x", uuid);
+ if ((s = get_uuid_name(uuid)) != 0)
+ printf("(%s)", s);
+ uuid = get_u16(frm);
+ printf(" src 0x%x", uuid);
+ if ((s = get_uuid_name(uuid)) != 0)
+ printf("(%s)", s);
+ printf("\n");
+ break;
+ case 4:
+ uuid = get_u32(frm);
+ printf("dst 0x%x", uuid);
+ if ((s = get_uuid_name(uuid)) != 0)
+ printf("(%s)", s);
+ uuid = get_u32(frm);
+ printf(" src 0x%x", uuid);
+ if ((s = get_uuid_name(uuid)) != 0)
+ printf("(%s)", s);
+ printf("\n");
+ break;
+ case 16:
+ uuid = get_u32(frm);
+ printf("dst 0x%x", uuid);
+ if ((s = get_uuid_name(uuid)) != 0)
+ printf("(%s)", s);
+ frm->ptr += 12;
+ frm->len -= 12;
+ uuid = get_u32(frm);
+ printf(" src 0x%x", uuid);
+ if ((s = get_uuid_name(uuid)) != 0)
+ printf("(%s)", s);
+ printf("\n");
+ frm->ptr += 12;
+ frm->len -= 12;
+ break;
+ default:
+ frm->ptr += (uuid_size * 2);
+ frm->len -= (uuid_size * 2);
+ break;
+ }
+ break;
+
+ case BNEP_SETUP_CONNECTION_RESPONSE_MSG:
+ printf("Setup Rsp(0x%02x) res 0x%04x\n",
+ type, get_u16(frm));
+ break;
+
+ case BNEP_FILTER_NET_TYPE_SET_MSG:
+ length = get_u16(frm);
+ printf("Filter NetType Set(0x%02x) len 0x%04x\n",
+ type, length);
+ for (i = 0; i < length / 4; i++) {
+ p_indent(level + 1, frm);
+ printf("0x%04x - ", get_u16(frm));
+ printf("0x%04x\n", get_u16(frm));
+ }
+ break;
+
+ case BNEP_FILTER_NET_TYPE_RESPONSE_MSG:
+ printf("Filter NetType Rsp(0x%02x) res 0x%04x\n",
+ type, get_u16(frm));
+ break;
+
+ case BNEP_FILTER_MULT_ADDR_SET_MSG:
+ length = get_u16(frm);
+ printf("Filter MultAddr Set(0x%02x) len 0x%04x\n",
+ type, length);
+ for (i = 0; i < length / 12; i++) {
+ p_indent(level + 1, frm);
+ printf("%s - ", get_macaddr(frm));
+ printf("%s\n", get_macaddr(frm));
+ }
+ break;
+
+ case BNEP_FILTER_MULT_ADDR_RESPONSE_MSG:
+ printf("Filter MultAddr Rsp(0x%02x) res 0x%04x\n",
+ type, get_u16(frm));
+ break;
+
+ default:
+ printf("Unknown control type(0x%02x)\n", type);
+ raw_ndump(level + 1, frm, header_length - 1);
+ frm->ptr += header_length - 1;
+ frm->len -= header_length - 1;
+ return;
+ }
+}
+
+static void bnep_eval_extension(int level, struct frame *frm)
+{
+ uint8_t type = get_u8(frm);
+ uint8_t length = get_u8(frm);
+ int extension = type & 0x80;
+
+ p_indent(level, frm);
+
+ switch (type & 0x7f) {
+ case BNEP_EXTENSION_CONTROL:
+ printf("Ext Control(0x%02x|%s) len 0x%02x\n",
+ type & 0x7f, extension ? "1" : "0", length);
+ bnep_control(level, frm, length);
+ break;
+
+ default:
+ printf("Ext Unknown(0x%02x|%s) len 0x%02x\n",
+ type & 0x7f, extension ? "1" : "0", length);
+ raw_ndump(level + 1, frm, length);
+ frm->ptr += length;
+ frm->len -= length;
+ }
+
+ if (extension)
+ bnep_eval_extension(level, frm);
+}
+
+void bnep_dump(int level, struct frame *frm)
+{
+ uint8_t type = get_u8(frm);
+ uint16_t proto = 0x0000;
+ int extension = type & 0x80;
+
+ p_indent(level, frm);
+
+ switch (type & 0x7f) {
+ case BNEP_CONTROL:
+ printf("BNEP: Control(0x%02x|%s)\n",
+ type & 0x7f, extension ? "1" : "0");
+ bnep_control(level, frm, -1);
+ break;
+
+ case BNEP_COMPRESSED_ETHERNET:
+ printf("BNEP: Compressed(0x%02x|%s)\n",
+ type & 0x7f, extension ? "1" : "0");
+ p_indent(++level, frm);
+ proto = get_u16(frm);
+ printf("[proto 0x%04x]\n", proto);
+ break;
+
+ case BNEP_GENERAL_ETHERNET:
+ printf("BNEP: General ethernet(0x%02x|%s)\n",
+ type & 0x7f, extension ? "1" : "0");
+ p_indent(++level, frm);
+ printf("dst %s ", get_macaddr(frm));
+ printf("src %s ", get_macaddr(frm));
+ proto = get_u16(frm);
+ printf("[proto 0x%04x]\n", proto);
+ break;
+
+ case BNEP_COMPRESSED_ETHERNET_DEST_ONLY:
+ printf("BNEP: Compressed DestOnly(0x%02x|%s)\n",
+ type & 0x7f, extension ? "1" : "0");
+ p_indent(++level, frm);
+ printf("dst %s ", get_macaddr(frm));
+ proto = get_u16(frm);
+ printf("[proto 0x%04x]\n", proto);
+ break;
+
+ case BNEP_COMPRESSED_ETHERNET_SOURCE_ONLY:
+ printf("BNEP: Compressed SrcOnly(0x%02x|%s)\n",
+ type & 0x7f, extension ? "1" : "0");
+ p_indent(++level, frm);
+ printf("src %s ", get_macaddr(frm));
+ proto = get_u16(frm);
+ printf("[proto 0x%04x]\n", proto);
+ break;
+
+ default:
+ printf("(Unknown packet type)\n");
+ return;
+ }
+
+ /* Extension info */
+ if (extension)
+ bnep_eval_extension(++level, frm);
+
+ /* Control packet => No payload info */
+ if ((type & 0x7f) == BNEP_CONTROL)
+ return;
+
+ /* 802.1p header */
+ if (proto == 0x8100) {
+ p_indent(level, frm);
+ printf("802.1p Header: 0x%04x ", get_u16(frm));
+ proto = get_u16(frm);
+ printf("[proto 0x%04x]\n", proto);
+ }
+
+ if (!(parser.flags & DUMP_VERBOSE)) {
+ raw_dump(level, frm);
+ return;
+ }
+
+ switch (proto) {
+ case ETHERTYPE_ARP:
+ p_indent(++level, frm);
+ printf("ARP: ");
+ arp_dump(level, frm);
+ break;
+
+ case ETHERTYPE_REVARP:
+ p_indent(++level, frm);
+ printf("RARP: ");
+ arp_dump(level, frm);
+ break;
+
+ case ETHERTYPE_IP:
+ p_indent(++level, frm);
+ printf("IP: ");
+ ip_dump(level, frm);
+ break;
+
+ case ETHERTYPE_IPV6:
+ p_indent(++level, frm);
+ printf("IPV6: ");
+ ip_dump(level, frm);
+ break;
+
+ default:
+ raw_dump(level, frm);
+ break;
+ }
+}
--- /dev/null
+/*
+ *
+ * BlueZ - Bluetooth protocol stack for Linux
+ *
+ * Copyright (C) 2004-2007 Marcel Holtmann <marcel@holtmann.org>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include <stdio.h>
+#include <errno.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include <sys/types.h>
+#include <netinet/in.h>
+
+#include <bluetooth/bluetooth.h>
+#include <bluetooth/hci.h>
+
+#include "parser.h"
+
+#define BPA_U8(frm) (get_u8(frm))
+#define BPA_U16(frm) (btohs(htons(get_u16(frm))))
+#define BPA_U32(frm) (btohl(htonl(get_u32(frm))))
+
+void bpa_dump(int level, struct frame *frm)
+{
+ uint8_t id, status, channel;
+ uint16_t num, len;
+ uint32_t time;
+
+ id = get_u8(frm);
+ num = get_u16(frm);
+ len = BPA_U16(frm);
+
+ status = get_u8(frm);
+ time = get_u32(frm);
+ channel = get_u8(frm);
+
+ p_indent(level, frm);
+ printf("BPA: id %d num %d status 0x%02x time %d channel %d\n",
+ id, num, status, time, channel);
+
+ raw_dump(level, frm);
+}
--- /dev/null
+/*
+ *
+ * BlueZ - Bluetooth protocol stack for Linux
+ *
+ * Copyright (C) 2004-2007 Marcel Holtmann <marcel@holtmann.org>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include <stdio.h>
+#include <errno.h>
+#include <ctype.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include <sys/types.h>
+#include <netinet/in.h>
+
+#include <bluetooth/bluetooth.h>
+
+#include "parser.h"
+
+#define CAPI_U8(frm) (get_u8(frm))
+#define CAPI_U16(frm) (btohs(htons(get_u16(frm))))
+#define CAPI_U32(frm) (btohl(htonl(get_u32(frm))))
+
+static char *cmd2str(uint8_t cmd)
+{
+ switch (cmd) {
+ case 0x01:
+ return "ALERT";
+ case 0x02:
+ return "CONNECT";
+ case 0x03:
+ return "CONNECT_ACTIVE";
+ case 0x04:
+ return "DISCONNECT";
+ case 0x05:
+ return "LISTEN";
+ case 0x08:
+ return "INFO";
+ case 0x20:
+ return "INTEROPERABILITY";
+ case 0x41:
+ return "SELECT_B_PROTOCOL";
+ case 0x80:
+ return "FACILITY";
+ case 0x82:
+ return "CONNECT_B3";
+ case 0x83:
+ return "CONNECT_B3_ACTIVE";
+ case 0x84:
+ return "DISCONNECT_B3";
+ case 0x86:
+ return "DATA_B3";
+ case 0x87:
+ return "RESET_B3";
+ case 0x88:
+ return "CONNECT_B3_T90_ACTIVE";
+ case 0xff:
+ return "MANUFACTURER";
+ default:
+ return "UNKNOWN";
+ }
+}
+
+static char *subcmd2str(uint8_t subcmd)
+{
+ switch (subcmd) {
+ case 0x80:
+ return "REQ";
+ case 0x81:
+ return "CONF";
+ case 0x82:
+ return "IND";
+ case 0x83:
+ return "RESP";
+ default:
+ return "UNKN";
+ }
+}
+
+static char *interopsel2str(uint16_t sel)
+{
+ switch (sel) {
+ case 0x0000:
+ return "USB Device Management";
+ case 0x0001:
+ return "Bluetooth Device Management";
+ default:
+ return "Unknown";
+ }
+}
+
+static char *func2str(uint16_t func)
+{
+ switch (func) {
+ case 0:
+ return "Register";
+ case 1:
+ return "Release";
+ case 2:
+ return "Get_Profile";
+ case 3:
+ return "Get_Manufacturer";
+ case 4:
+ return "Get_Version";
+ case 5:
+ return "Get_Serial_Number";
+ case 6:
+ return "Manufacturer";
+ case 7:
+ return "Echo_Loopback";
+ default:
+ return "Unknown";
+ }
+}
+
+static char *facilitysel2str(uint16_t sel)
+{
+ switch (sel) {
+ case 0x0000:
+ return "Handset";
+ case 0x0001:
+ return "DTMF";
+ case 0x0002:
+ return "V.42 bis";
+ case 0x0003:
+ return "Supplementary Services";
+ case 0x0004:
+ return "Power management wakeup";
+ case 0x0005:
+ return "Line Interconnect";
+ case 0x0006:
+ return "DTMF";
+ default:
+ return "Unknown";
+ }
+}
+
+static char *info2str(uint16_t info)
+{
+ switch (info) {
+ case 0x0000:
+ return "No error";
+ case 0x0001:
+ return "NCPI not supported by current protocol, NCPI ignored";
+ case 0x0002:
+ return "Flags not supported by current protocol, flags ignored";
+ case 0x2001:
+ return "Message not supported in current state";
+ case 0x2002:
+ return "Incorrect Controller/PLCI/NCCI";
+ case 0x2003:
+ return "No PLCI available";
+ case 0x2004:
+ return "No NCCI available";
+ case 0x2005:
+ return "No Listen resources available";
+ case 0x2007:
+ return "Illegal message parameter coding";
+ case 0x2008:
+ return "No interconnection resources available";
+ case 0x3001:
+ return "B1 protocol not supported";
+ case 0x3002:
+ return "B2 protocol not supported";
+ case 0x3003:
+ return "B3 protocol not supported";
+ case 0x3004:
+ return "B1 protocol parameter not supported";
+ case 0x3005:
+ return "B2 protocol parameter not supported";
+ case 0x3006:
+ return "B3 protocol parameter not supported";
+ case 0x3007:
+ return "B protocol combination not supported";
+ case 0x3008:
+ return "NCPI not supported";
+ case 0x3009:
+ return "CIP Value unknown";
+ case 0x300A:
+ return "Flags not supported (reserved bits)";
+ case 0x300B:
+ return "Facility not supported";
+ case 0x300C:
+ return "Data length not supported by current protocol";
+ case 0x300D:
+ return "Reset procedure not supported by current protocol";
+ case 0x300F:
+ return "Unsupported interoperability";
+ case 0x3011:
+ return "Facility specific function not supported";
+ case 0x3301:
+ return "Protocol error, Layer 1";
+ case 0x3302:
+ return "Protocol error, Layer 2";
+ case 0x3303:
+ return "Protocol error, Layer 3";
+ case 0x3304:
+ return "Another application got that call";
+ case 0x3305:
+ return "Cleared by Call Control Supervision";
+ case 0x3400:
+ /* The cause value received from the network in a cause
+ * information element (Octet 4) is indicated in the field 00 */
+ return "Disconnect cause from the network in accordance with Q.850/ETS 300 102-1";
+ default:
+ return "Unknown";
+ }
+}
+
+static void profile(int level, struct frame *frm)
+{
+ uint16_t nctr, nchn;
+ uint32_t value;
+
+ nctr = CAPI_U16(frm);
+ nchn = CAPI_U16(frm);
+
+ if (nchn > 0) {
+ p_indent(level, frm);
+ printf("Controller: %d\n", nctr);
+ p_indent(level, frm);
+ printf("Number of B-channels: %d\n", nchn);
+
+ value = CAPI_U32(frm);
+ p_indent(level, frm);
+ printf("Global options: 0x%04x\n", value);
+ value = CAPI_U32(frm);
+ p_indent(level, frm);
+ printf("B1 protocol support: 0x%08x\n", value);
+ value = CAPI_U32(frm);
+ p_indent(level, frm);
+ printf("B2 protocol support: 0x%08x\n", value);
+ value = CAPI_U32(frm);
+ p_indent(level, frm);
+ printf("B3 protocol support: 0x%08x\n", value);
+
+ frm->ptr += 24;
+ frm->len -= 24;
+
+ p_indent(level, frm);
+ printf("Manufacturer-specific information:\n");
+ hex_dump(level, frm, 20);
+ } else {
+ p_indent(level, frm);
+ printf("Number of controllers: %d\n", nctr);
+ }
+}
+
+static void cmd_common(int level, uint8_t subcmd, struct frame *frm)
+{
+ uint32_t val;
+ uint16_t info, ncci;
+ uint8_t ctr, plci;
+
+ val = CAPI_U32(frm);
+ ctr = val & 0xff;
+ plci = (val & 0xff00) >> 8;
+ ncci = (val & 0xffff0000) >> 16;
+
+ p_indent(level, frm);
+ printf("Controller: %d %s\n", ctr & 0x7f, ctr & 0x80 ? "Ext." : "Int.");
+
+ if (plci > 0) {
+ p_indent(level, frm);
+ printf("PLCI: 0x%02x\n", plci);
+ }
+
+ if (ncci > 0) {
+ p_indent(level, frm);
+ printf("NCCI: 0x%04x\n", ncci);
+ }
+
+ if (subcmd == 0x81) {
+ info = CAPI_U16(frm);
+ p_indent(level, frm);
+ printf("Info: 0x%04x (%s)\n", info, info2str(info));
+ }
+}
+
+static void cmd_alert(int level, uint8_t subcmd, struct frame *frm)
+{
+ uint8_t len;
+
+ cmd_common(level, subcmd, frm);
+
+ if (subcmd == 0x80) {
+ len = CAPI_U8(frm);
+ if (len > 0) {
+ p_indent(level, frm);
+ printf("Additional info:\n");
+ hex_dump(level, frm, len);
+ }
+ }
+}
+
+static void cmd_connect(int level, uint8_t subcmd, struct frame *frm)
+{
+ uint16_t cip;
+ uint8_t len;
+
+ cmd_common(level, subcmd, frm);
+
+ if (subcmd == 0x81)
+ return;
+
+ cip = CAPI_U16(frm);
+ p_indent(level, frm);
+ printf("CIP value: 0x%04x\n", cip);
+
+ len = CAPI_U8(frm);
+ frm->ptr += len;
+ frm->len -= len;
+ len = CAPI_U8(frm);
+ frm->ptr += len;
+ frm->len -= len;
+ len = CAPI_U8(frm);
+ frm->ptr += len;
+ frm->len -= len;
+ len = CAPI_U8(frm);
+ frm->ptr += len;
+ frm->len -= len;
+
+ raw_dump(level, frm);
+}
+
+static void cmd_disconnect(int level, uint8_t subcmd, struct frame *frm)
+{
+ uint16_t reason;
+ uint8_t len;
+
+ cmd_common(level, subcmd, frm);
+
+ if (subcmd == 0x80) {
+ len = CAPI_U8(frm);
+ if (len > 0) {
+ p_indent(level, frm);
+ printf("Additional info:\n");
+ hex_dump(level, frm, len);
+ }
+ }
+
+ if (subcmd == 0x82) {
+ reason = CAPI_U16(frm);
+ p_indent(level, frm);
+ printf("Reason: 0x%04x (%s)\n", reason, info2str(reason));
+ }
+}
+
+static void cmd_connect_active(int level, uint8_t subcmd, struct frame *frm)
+{
+ uint8_t len;
+
+ cmd_common(level, subcmd, frm);
+
+ if (subcmd == 0x82) {
+ len = CAPI_U8(frm);
+ if (len > 0) {
+ p_indent(level, frm);
+ printf("Connected number:\n");
+ hex_dump(level, frm, len);
+ }
+
+ len = CAPI_U8(frm);
+ if (len > 0) {
+ p_indent(level, frm);
+ printf("Connected subaddress:\n");
+ hex_dump(level, frm, len);
+ }
+
+ len = CAPI_U8(frm);
+ if (len > 0) {
+ p_indent(level, frm);
+ printf("LLC:\n");
+ hex_dump(level, frm, len);
+ }
+ }
+}
+
+static void cmd_listen(int level, uint8_t subcmd, struct frame *frm)
+{
+ uint32_t mask;
+ uint8_t len;
+
+ cmd_common(level, subcmd, frm);
+
+ if (subcmd == 0x80) {
+ mask = CAPI_U32(frm);
+ p_indent(level, frm);
+ printf("Info mask: 0x%08x\n", mask);
+
+ mask = CAPI_U32(frm);
+ p_indent(level, frm);
+ printf("CIP mask: 0x%08x", mask);
+
+ mask = CAPI_U32(frm);
+ if (mask > 0)
+ printf(" 0x%08x\n", mask);
+ else
+ printf("\n");
+
+ len = CAPI_U8(frm);
+ if (len > 0) {
+ p_indent(level, frm);
+ printf("Calling party number:\n");
+ hex_dump(level, frm, len);
+ }
+ frm->ptr += len;
+ frm->len -= len;
+
+ len = CAPI_U8(frm);
+ if (len > 0) {
+ p_indent(level, frm);
+ printf("Calling party subaddress:\n");
+ hex_dump(level, frm, len);
+ }
+ frm->ptr += len;
+ frm->len -= len;
+ }
+}
+
+static void cmd_info(int level, uint8_t subcmd, struct frame *frm)
+{
+ uint8_t len;
+ uint16_t info;
+
+ cmd_common(level, subcmd, frm);
+
+ switch (subcmd) {
+ case 0x80:
+ len = CAPI_U8(frm);
+ if (len > 0) {
+ p_indent(level, frm);
+ printf("Called party number:\n");
+ hex_dump(level, frm, len);
+ }
+ frm->ptr += len;
+ frm->len -= len;
+
+ len = CAPI_U8(frm);
+ if (len > 0) {
+ p_indent(level, frm);
+ printf("Additional info:\n");
+ hex_dump(level, frm, len);
+ }
+ break;
+
+ case 0x82:
+ info = CAPI_U16(frm);
+ p_indent(level, frm);
+ printf("Info number: %d\n", info);
+
+ len = CAPI_U8(frm);
+ if (len > 0) {
+ p_indent(level, frm);
+ printf("Info element:\n");
+ hex_dump(level, frm, len);
+ }
+ break;
+ }
+}
+
+static void cmd_interoperability(int level, uint8_t subcmd, struct frame *frm)
+{
+ uint16_t sel, func, info;
+ uint16_t nconn, datablkcnt, datablklen;
+ uint32_t ctr, value, major, minor;
+
+ info = (subcmd == 0x81) ? CAPI_U16(frm) : 0;
+ sel = CAPI_U16(frm);
+ CAPI_U8(frm);
+ if (subcmd != 0x83) {
+ func = CAPI_U16(frm);
+ CAPI_U8(frm);
+ } else
+ func = 0;
+
+ p_indent(level, frm);
+ printf("Selector: 0x%04x (%s)\n", sel, interopsel2str(sel));
+
+ switch (sel) {
+ case 0x0001:
+ p_indent(level, frm);
+ printf("Function: %d (%s)\n", func, func2str(func));
+
+ switch (subcmd) {
+ case 0x80:
+ switch (func) {
+ case 0:
+ nconn = CAPI_U16(frm);
+ p_indent(level + 1, frm);
+ printf("maxLogicalConnections: %d\n", nconn);
+ datablkcnt = CAPI_U16(frm);
+ p_indent(level + 1, frm);
+ printf("maxBDataBlocks: %d\n", datablkcnt);
+ datablklen = CAPI_U16(frm);
+ p_indent(level + 1, frm);
+ printf("maxBDataLen: %d\n", datablklen);
+ break;
+ case 2:
+ case 3:
+ case 4:
+ case 5:
+ ctr = CAPI_U32(frm);
+ p_indent(level + 1, frm);
+ printf("Controller: %d\n", ctr);
+ break;
+ default:
+ raw_dump(level + 1, frm);
+ break;
+ }
+ break;
+
+ case 0x81:
+ switch (func) {
+ case 0:
+ case 1:
+ info = CAPI_U16(frm);
+ p_indent(level + 1, frm);
+ printf("Info: 0x%04x (%s)\n", info, info2str(info));
+ break;
+ case 2:
+ info = CAPI_U16(frm);
+ p_indent(level + 1, frm);
+ printf("Info: 0x%04x (%s)\n", info, info2str(info));
+ CAPI_U8(frm);
+ profile(level + 1, frm);
+ break;
+ case 3:
+ info = CAPI_U16(frm);
+ p_indent(level + 1, frm);
+ printf("Info: 0x%04x (%s)\n", info, info2str(info));
+ ctr = CAPI_U32(frm);
+ p_indent(level + 1, frm);
+ printf("Controller: %d\n", ctr);
+ CAPI_U8(frm);
+ p_indent(level + 1, frm);
+ printf("Identification: \"%s\"\n", (char *) frm->ptr);
+ break;
+ case 4:
+ value = CAPI_U32(frm);
+ p_indent(level + 1, frm);
+ printf("Return value: 0x%04x\n", value);
+ ctr = CAPI_U32(frm);
+ p_indent(level + 1, frm);
+ printf("Controller: %d\n", ctr);
+ p_indent(level + 1, frm);
+ major = CAPI_U32(frm);
+ minor = CAPI_U32(frm);
+ printf("CAPI: %d.%d\n", major, minor);
+ major = CAPI_U32(frm);
+ minor = CAPI_U32(frm);
+ p_indent(level + 1, frm);
+ printf("Manufacture: %u.%01x%01x-%02u (%d.%d)\n",
+ (major & 0xf0) >> 4, (major & 0x0f) << 4,
+ (minor & 0xf0) >> 4, minor & 0x0f,
+ major, minor);
+ break;
+ case 5:
+ value = CAPI_U32(frm);
+ p_indent(level + 1, frm);
+ printf("Return value: 0x%04x\n", value);
+ ctr = CAPI_U32(frm);
+ p_indent(level + 1, frm);
+ printf("Controller: %d\n", ctr);
+ CAPI_U8(frm);
+ p_indent(level + 1, frm);
+ printf("Serial number: %.7s\n", (char *) frm->ptr);
+ break;
+ default:
+ raw_dump(level + 1, frm);
+ break;
+ }
+ break;
+
+ default:
+ raw_dump(level, frm);
+ break;
+ }
+ break;
+
+ default:
+ p_indent(level, frm);
+ printf("Function: %d\n", func);
+ if (subcmd == 0x81) {
+ p_indent(level, frm);
+ printf("Info: 0x%04x (%s)\n", info, info2str(info));
+ }
+ raw_dump(level + 1, frm);
+ break;
+ }
+}
+
+static void cmd_facility(int level, uint8_t subcmd, struct frame *frm)
+{
+ uint16_t sel;
+
+ cmd_common(level, subcmd, frm);
+
+ sel = CAPI_U16(frm);
+ CAPI_U8(frm);
+
+ p_indent(level, frm);
+ printf("Selector: 0x%04x (%s)\n", sel, facilitysel2str(sel));
+
+ raw_dump(level, frm);
+}
+
+static void cmd_connect_b3(int level, uint8_t subcmd, struct frame *frm)
+{
+ uint16_t reject;
+ uint8_t len;
+
+ cmd_common(level, subcmd, frm);
+
+ if (subcmd == 0x81)
+ return;
+
+ if (subcmd == 0x83) {
+ reject = CAPI_U16(frm);
+ p_indent(level, frm);
+ printf("Reject: 0x%04x (%s)\n", reject, info2str(reject));
+ }
+
+ len = CAPI_U8(frm);
+ if (len > 0) {
+ p_indent(level, frm);
+ printf("NCPI:\n");
+ hex_dump(level, frm, len);
+ }
+}
+
+static void cmd_connect_b3_active(int level, uint8_t subcmd, struct frame *frm)
+{
+ uint8_t len;
+
+ cmd_common(level, subcmd, frm);
+
+ if (subcmd == 0x82) {
+ len = CAPI_U8(frm);
+ if (len > 0) {
+ p_indent(level, frm);
+ printf("NCPI:\n");
+ hex_dump(level, frm, len);
+ }
+ }
+}
+
+static void cmd_disconnect_b3(int level, uint8_t subcmd, struct frame *frm)
+{
+ uint16_t reason;
+ uint8_t len;
+
+ cmd_common(level, subcmd, frm);
+
+ if (subcmd == 0x82) {
+ reason = CAPI_U16(frm);
+ p_indent(level, frm);
+ printf("Reason: 0x%04x (%s)\n", reason, info2str(reason));
+ }
+
+ if (subcmd == 0x80 || subcmd == 0x82) {
+ len = CAPI_U8(frm);
+ if (len > 0) {
+ p_indent(level, frm);
+ printf("NCPI:\n");
+ hex_dump(level, frm, len);
+ }
+ }
+}
+
+static void cmd_data_b3(int level, uint8_t subcmd, struct frame *frm)
+{
+ uint32_t data;
+ uint64_t data64;
+ uint16_t length, handle, flags, info;
+
+ cmd_common(level, 0x00, frm);
+
+ if (subcmd == 0x81 || subcmd == 0x83) {
+ handle = CAPI_U16(frm);
+ p_indent(level, frm);
+ printf("Data handle: 0x%04x\n", handle);
+
+ if (subcmd == 0x81) {
+ info = CAPI_U16(frm);
+ p_indent(level, frm);
+ printf("Info: 0x%04x (%s)\n", info, info2str(info));
+ }
+ } else {
+ data = CAPI_U32(frm);
+
+ length = CAPI_U16(frm);
+ p_indent(level, frm);
+ printf("Data length: 0x%04x (%d bytes)\n", length, length);
+
+ handle = CAPI_U16(frm);
+ p_indent(level, frm);
+ printf("Data handle: 0x%04x\n", handle);
+
+ flags = CAPI_U16(frm);
+ p_indent(level, frm);
+ printf("Flags: 0x%04x\n", flags);
+
+ if (data == 0)
+ data64 = get_u64(frm);
+
+ raw_dump(level, frm);
+ }
+}
+
+static void cmd_reset_b3(int level, uint8_t subcmd, struct frame *frm)
+{
+ uint8_t len;
+
+ cmd_common(level, subcmd, frm);
+
+ if (subcmd == 0x80 || subcmd == 0x82) {
+ len = CAPI_U8(frm);
+ if (len > 0) {
+ p_indent(level, frm);
+ printf("NCPI:\n");
+ hex_dump(level, frm, len);
+ }
+ }
+}
+
+static void cmd_manufacturer(int level, uint8_t subcmd, struct frame *frm)
+{
+ uint32_t ctr, class, func;
+ uint16_t len;
+ unsigned char *id;
+
+ ctr = CAPI_U32(frm);
+ p_indent(level, frm);
+ printf("Controller: %d\n", ctr);
+
+ id = (unsigned char *) frm->ptr;
+ p_indent(level, frm);
+ if (isprint(id[0]) && isprint(id[1]) && isprint(id[2]) && isprint(id[3]))
+ printf("Manufacturer: %.4s", id);
+ else
+ printf("Manufacturer: 0x%02x 0x%02x 0x%02x 0x%02x",
+ id[0], id[1], id[2], id[3]);
+ frm->ptr += 4;
+ frm->len -= 4;
+
+ if (!strncmp((char *) id, "AVM!", 4)) {
+ class = CAPI_U32(frm);
+ func = CAPI_U32(frm);
+ len = CAPI_U8(frm);
+ if (len == 0xff)
+ len = CAPI_U16(frm);
+
+ printf(" [class %d func %d len %d]\n", class, func, len);
+ } else
+ printf("\n");
+
+ raw_dump(level, frm);
+}
+
+void capi_dump(int level, struct frame *frm)
+{
+ uint16_t len, appl, msgnum;
+ uint8_t cmd, subcmd;
+
+ len = CAPI_U16(frm) - 8;
+ appl = CAPI_U16(frm);
+ cmd = CAPI_U8(frm);
+ subcmd = CAPI_U8(frm);
+ msgnum = CAPI_U16(frm);
+
+ p_indent(level, frm);
+
+ printf("CAPI_%s_%s: appl %d msgnum %d len %d\n",
+ cmd2str(cmd), subcmd2str(subcmd), appl, msgnum, len);
+
+ switch (cmd) {
+ case 0x01:
+ cmd_alert(level + 1, subcmd, frm);
+ break;
+ case 0x02:
+ cmd_connect(level + 1, subcmd, frm);
+ break;
+ case 0x03:
+ cmd_connect_active(level + 1, subcmd, frm);
+ break;
+ case 0x04:
+ cmd_disconnect(level + 1, subcmd, frm);
+ break;
+ case 0x05:
+ cmd_listen(level + 1, subcmd, frm);
+ break;
+ case 0x08:
+ cmd_info(level + 1, subcmd, frm);
+ break;
+ case 0x20:
+ cmd_interoperability(level + 1, subcmd, frm);
+ break;
+ case 0x80:
+ cmd_facility(level + 1, subcmd, frm);
+ break;
+ case 0x82:
+ cmd_connect_b3(level + 1, subcmd, frm);
+ break;
+ case 0x83:
+ case 0x88:
+ cmd_connect_b3_active(level + 1, subcmd, frm);
+ break;
+ case 0x84:
+ cmd_disconnect_b3(level + 1, subcmd, frm);
+ break;
+ case 0x86:
+ cmd_data_b3(level + 1, subcmd, frm);
+ break;
+ case 0x87:
+ cmd_reset_b3(level + 1, subcmd, frm);
+ break;
+ case 0xff:
+ cmd_manufacturer(level + 1, subcmd, frm);
+ break;
+ default:
+ raw_dump(level, frm);
+ frm->ptr += len;
+ frm->len -= len;
+ break;
+ }
+}
--- /dev/null
+/*
+ *
+ * BlueZ - Bluetooth protocol stack for Linux
+ *
+ * Copyright (C) 2002-2007 Marcel Holtmann <marcel@holtmann.org>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include <stdio.h>
+#include <errno.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include <sys/types.h>
+#include <netinet/in.h>
+
+#include "parser.h"
+
+#define TABLE_SIZE 10
+
+static struct {
+ uint16_t handle;
+ uint16_t cid;
+ struct frame msg[16];
+} table[TABLE_SIZE];
+
+static void add_segment(uint8_t bid, struct frame *frm, int len)
+{
+ uint16_t handle = frm->handle, cid = frm->cid;
+ struct frame *msg;
+ void *data;
+ int i, pos = -1;
+
+ if (bid > 15)
+ return;
+
+ for (i = 0; i < TABLE_SIZE; i++) {
+ if (table[i].handle == handle && table[i].cid == cid) {
+ pos = i;
+ break;
+ }
+
+ if (pos < 0 && !table[i].handle && !table[i].cid)
+ pos = i;
+ }
+
+ if (pos < 0)
+ return;
+
+ table[pos].handle = handle;
+ table[pos].cid = cid;
+ msg = &table[pos].msg[bid];
+
+ data = malloc(msg->data_len + len);
+ if (!data)
+ return;
+
+ if (msg->data_len > 0)
+ memcpy(data, msg->data, msg->data_len);
+
+ memcpy(data + msg->data_len, frm->ptr, len);
+ free(msg->data);
+ msg->data = data;
+ msg->data_len += len;
+ msg->ptr = msg->data;
+ msg->len = msg->data_len;
+ msg->in = frm->in;
+ msg->ts = frm->ts;
+ msg->handle = handle;
+ msg->cid = cid;
+}
+
+static void free_segment(uint8_t bid, struct frame *frm)
+{
+ uint16_t handle = frm->handle, cid = frm->cid;
+ struct frame *msg;
+ int i, len = 0, pos = -1;
+
+ if (bid > 15)
+ return;
+
+ for (i = 0; i < TABLE_SIZE; i++)
+ if (table[i].handle == handle && table[i].cid == cid) {
+ pos = i;
+ break;
+ }
+
+ if (pos < 0)
+ return;
+
+ msg = &table[pos].msg[bid];
+
+ if (msg->data)
+ free(msg->data);
+
+ msg->data = NULL;
+ msg->data_len = 0;
+
+ for (i = 0; i < 16; i++)
+ len += table[pos].msg[i].data_len;
+
+ if (!len) {
+ table[pos].handle = 0;
+ table[pos].cid = 0;
+ }
+}
+
+static struct frame *get_segment(uint8_t bid, struct frame *frm)
+{
+ uint16_t handle = frm->handle, cid = frm->cid;
+ int i;
+
+ if (bid > 15)
+ return NULL;
+
+ for (i = 0; i < TABLE_SIZE; i++)
+ if (table[i].handle == handle && table[i].cid == cid)
+ return &table[i].msg[bid];
+
+ return NULL;
+}
+
+static char *bst2str(uint8_t bst)
+{
+ switch (bst) {
+ case 0x00:
+ return "complete CAPI Message";
+ case 0x01:
+ return "segmented CAPI Message";
+ case 0x02:
+ return "error";
+ case 0x03:
+ return "reserved";
+ default:
+ return "unknown";
+ }
+}
+
+void cmtp_dump(int level, struct frame *frm)
+{
+ struct frame *msg;
+ uint8_t hdr, bid;
+ uint16_t len;
+
+ while (frm->len > 0) {
+
+ hdr = get_u8(frm);
+ bid = (hdr & 0x3c) >> 2;
+
+ switch ((hdr & 0xc0) >> 6) {
+ case 0x01:
+ len = get_u8(frm);
+ break;
+ case 0x02:
+ len = htons(get_u16(frm));
+ break;
+ default:
+ len = 0;
+ break;
+ }
+
+ p_indent(level, frm);
+
+ printf("CMTP: %s: id %d len %d\n", bst2str(hdr & 0x03), bid, len);
+
+ switch (hdr & 0x03) {
+ case 0x00:
+ add_segment(bid, frm, len);
+ msg = get_segment(bid, frm);
+ if (!msg)
+ break;
+
+ if (!p_filter(FILT_CAPI))
+ capi_dump(level + 1, msg);
+ else
+ raw_dump(level, msg);
+
+ free_segment(bid, frm);
+ break;
+ case 0x01:
+ add_segment(bid, frm, len);
+ break;
+ default:
+ free_segment(bid, frm);
+ break;
+ }
+
+ frm->ptr += len;
+ frm->len -= len;
+ }
+}
--- /dev/null
+/*
+ *
+ * BlueZ - Bluetooth protocol stack for Linux
+ *
+ * Copyright (C) 2004-2007 Marcel Holtmann <marcel@holtmann.org>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include <stdio.h>
+#include <errno.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include <sys/types.h>
+#include <netinet/in.h>
+
+#include "parser.h"
+
+#define CSR_U8(frm) (get_u8(frm))
+#define CSR_U16(frm) (btohs(htons(get_u16(frm))))
+#define CSR_U32(frm) ((CSR_U16(frm) << 16) + CSR_U16(frm))
+#define CSR_S16(frm) (btohs(htons(get_u16(frm))))
+
+static char *type2str(uint16_t type)
+{
+ switch (type) {
+ case 0x0000:
+ return "Get req";
+ case 0x0001:
+ return "Get rsp";
+ case 0x0002:
+ return "Set req";
+ default:
+ return "Reserved";
+ }
+}
+
+static inline void valueless_dump(int level, char *str, struct frame *frm)
+{
+ p_indent(level, frm);
+ printf("%s\n", str);
+}
+
+static inline void complex_dump(int level, char *str, struct frame *frm)
+{
+ p_indent(level, frm);
+ printf("%s\n", str);
+
+ raw_dump(level, frm);
+}
+
+static inline void bool_dump(int level, char *str, struct frame *frm)
+{
+ uint16_t value;
+
+ value = CSR_U16(frm);
+
+ p_indent(level, frm);
+ printf("%s: value %s (%d)\n", str, value ? "TRUE" : "FALSE", value);
+}
+
+static inline void int8_dump(int level, char *str, struct frame *frm)
+{
+ int16_t value;
+
+ value = CSR_S16(frm);
+
+ p_indent(level, frm);
+ printf("%s: value %d (0x%2.2x)\n", str, value, value);
+}
+
+static inline void int16_dump(int level, char *str, struct frame *frm)
+{
+ int16_t value;
+
+ value = CSR_S16(frm);
+
+ p_indent(level, frm);
+ printf("%s: value %d (0x%2.2x)\n", str, value, value);
+}
+
+static inline void uint16_dump(int level, char *str, struct frame *frm)
+{
+ uint16_t value;
+
+ value = CSR_U16(frm);
+
+ p_indent(level, frm);
+ printf("%s: value %d (0x%4.4x)\n", str, value, value);
+}
+
+static inline void uint32_dump(int level, char *str, struct frame *frm)
+{
+ uint32_t value;
+
+ value = CSR_U32(frm);
+
+ p_indent(level, frm);
+ printf("%s: value %d (0x%4.4x)\n", str, value, value);
+}
+
+static inline void bdaddr_dump(int level, char *str, struct frame *frm)
+{
+ char addr[18];
+
+ p_ba2str(frm->ptr, addr);
+
+ p_indent(level, frm);
+ printf("%s: bdaddr %s\n", str, addr);
+}
+
+static inline void features_dump(int level, char *str, struct frame *frm)
+{
+ unsigned char features[8];
+ int i;
+
+ memcpy(features, frm->ptr, 8);
+
+ p_indent(level, frm);
+ printf("%s: features", str);
+ for (i = 0; i < 8; i++)
+ printf(" 0x%02x", features[i]);
+ printf("\n");
+}
+
+static inline void commands_dump(int level, char *str, struct frame *frm)
+{
+ unsigned char commands[64];
+ int i;
+
+ memcpy(commands, frm->ptr, frm->len);
+
+ p_indent(level, frm);
+ printf("%s: commands", str);
+ for (i = 0; i < frm->len; i++)
+ printf(" 0x%02x", commands[i]);
+ printf("\n");
+}
+
+static inline void handle_length_dump(int level, char *str, struct frame *frm)
+{
+ uint16_t handle, length;
+
+ handle = CSR_U16(frm);
+ length = CSR_U16(frm);
+
+ p_indent(level, frm);
+ printf("%s: handle %d length %d\n", str, handle, length);
+}
+
+static inline void handle_clock_dump(int level, char *str, struct frame *frm)
+{
+ uint16_t handle;
+ uint32_t clock;
+
+ handle = CSR_U16(frm);
+ clock = CSR_U32(frm);
+
+ p_indent(level, frm);
+ printf("%s: handle %d clock 0x%4.4x\n", str, handle, clock);
+}
+
+static inline void radiotest_dump(int level, char *str, struct frame *frm)
+{
+ uint16_t testid;
+
+ testid = CSR_U16(frm);
+
+ p_indent(level, frm);
+ printf("%s: test id %d\n", str, testid);
+
+ raw_dump(level, frm);
+}
+
+static inline void psmemtype_dump(int level, char *str, struct frame *frm)
+{
+ uint16_t store, type;
+
+ store = CSR_U16(frm);
+ type = CSR_U16(frm);
+
+ p_indent(level, frm);
+ printf("%s: store 0x%4.4x type %d\n", str, store, type);
+}
+
+static inline void psnext_dump(int level, char *str, struct frame *frm)
+{
+ uint16_t key, stores, next;
+
+ key = CSR_U16(frm);
+ stores = CSR_U16(frm);
+ next = CSR_U16(frm);
+
+ p_indent(level, frm);
+ printf("%s: key 0x%4.4x stores 0x%4.4x next 0x%4.4x\n", str, key, stores, next);
+}
+
+static inline void pssize_dump(int level, char *str, struct frame *frm)
+{
+ uint16_t key, length;
+
+ key = CSR_U16(frm);
+ length = CSR_U16(frm);
+
+ p_indent(level, frm);
+ printf("%s: key 0x%4.4x %s 0x%4.4x\n", str, key,
+ frm->in ? "len" : "stores", length);
+}
+
+static inline void psstores_dump(int level, char *str, struct frame *frm)
+{
+ uint16_t key, stores;
+
+ key = CSR_U16(frm);
+ stores = CSR_U16(frm);
+
+ p_indent(level, frm);
+ printf("%s: key 0x%4.4x stores 0x%4.4x\n", str, key, stores);
+}
+
+static inline void pskey_dump(int level, struct frame *frm)
+{
+ uint16_t key, length, stores;
+
+ key = CSR_U16(frm);
+ length = CSR_U16(frm);
+ stores = CSR_U16(frm);
+
+ p_indent(level, frm);
+ printf("PSKEY: key 0x%4.4x len %d stores 0x%4.4x\n", key, length, stores);
+
+ switch (key) {
+ case 0x0001:
+ bdaddr_dump(level + 1, "BDADDR", frm);
+ break;
+ case 0x0002:
+ uint16_dump(level + 1, "COUNTRYCODE", frm);
+ break;
+ case 0x0003:
+ uint32_dump(level + 1, "CLASSOFDEVICE", frm);
+ break;
+ case 0x0004:
+ uint16_dump(level + 1, "DEVICE_DRIFT", frm);
+ break;
+ case 0x0005:
+ uint16_dump(level + 1, "DEVICE_JITTER", frm);
+ break;
+ case 0x000d:
+ uint16_dump(level + 1, "MAX_ACLS", frm);
+ break;
+ case 0x000e:
+ uint16_dump(level + 1, "MAX_SCOS", frm);
+ break;
+ case 0x000f:
+ uint16_dump(level + 1, "MAX_REMOTE_MASTERS", frm);
+ break;
+ case 0x00da:
+ uint16_dump(level + 1, "ENC_KEY_LMIN", frm);
+ break;
+ case 0x00db:
+ uint16_dump(level + 1, "ENC_KEY_LMAX", frm);
+ break;
+ case 0x00ef:
+ features_dump(level + 1, "LOCAL_SUPPORTED_FEATURES", frm);
+ break;
+ case 0x0106:
+ commands_dump(level + 1, "LOCAL_SUPPORTED_COMMANDS", frm);
+ break;
+ case 0x010d:
+ uint16_dump(level + 1, "HCI_LMP_LOCAL_VERSION", frm);
+ break;
+ case 0x010e:
+ uint16_dump(level + 1, "LMP_REMOTE_VERSION", frm);
+ break;
+ case 0x01a5:
+ bool_dump(level + 1, "HOSTIO_USE_HCI_EXTN", frm);
+ break;
+ case 0x01ab:
+ bool_dump(level + 1, "HOSTIO_MAP_SCO_PCM", frm);
+ break;
+ case 0x01be:
+ uint16_dump(level + 1, "UART_BAUDRATE", frm);
+ break;
+ case 0x01f6:
+ uint16_dump(level + 1, "ANA_FTRIM", frm);
+ break;
+ case 0x01f9:
+ uint16_dump(level + 1, "HOST_INTERFACE", frm);
+ break;
+ case 0x01fe:
+ uint16_dump(level + 1, "ANA_FREQ", frm);
+ break;
+ case 0x02be:
+ uint16_dump(level + 1, "USB_VENDOR_ID", frm);
+ break;
+ case 0x02bf:
+ uint16_dump(level + 1, "USB_PRODUCT_ID", frm);
+ break;
+ case 0x02cb:
+ uint16_dump(level + 1, "USB_DFU_PRODUCT_ID", frm);
+ break;
+ case 0x03cd:
+ int16_dump(level + 1, "INITIAL_BOOTMODE", frm);
+ break;
+ default:
+ raw_dump(level + 1, frm);
+ break;
+ }
+}
+
+static inline void bccmd_dump(int level, struct frame *frm)
+{
+ uint16_t type, length, seqno, varid, status;
+
+ type = CSR_U16(frm);
+ length = CSR_U16(frm);
+ seqno = CSR_U16(frm);
+ varid = CSR_U16(frm);
+ status = CSR_U16(frm);
+
+ p_indent(level, frm);
+ printf("BCCMD: %s: len %d seqno %d varid 0x%4.4x status %d\n",
+ type2str(type), length, seqno, varid, status);
+
+ if (!(parser.flags & DUMP_VERBOSE)) {
+ raw_dump(level + 1, frm);
+ return;
+ }
+
+ switch (varid) {
+ case 0x000b:
+ valueless_dump(level + 1, "PS_CLR_ALL", frm);
+ break;
+ case 0x000c:
+ valueless_dump(level + 1, "PS_FACTORY_SET", frm);
+ break;
+ case 0x082d:
+ uint16_dump(level + 1, "PS_CLR_ALL_STORES", frm);
+ break;
+ case 0x2801:
+ uint16_dump(level + 1, "BC01_STATUS", frm);
+ break;
+ case 0x2819:
+ uint16_dump(level + 1, "BUILDID", frm);
+ break;
+ case 0x281a:
+ uint16_dump(level + 1, "CHIPVER", frm);
+ break;
+ case 0x281b:
+ uint16_dump(level + 1, "CHIPREV", frm);
+ break;
+ case 0x2825:
+ uint16_dump(level + 1, "INTERFACE_VERSION", frm);
+ break;
+ case 0x282a:
+ uint16_dump(level + 1, "RAND", frm);
+ break;
+ case 0x282c:
+ uint16_dump(level + 1, "MAX_CRYPT_KEY_LENGTH", frm);
+ break;
+ case 0x2833:
+ uint16_dump(level + 1, "E2_APP_SIZE", frm);
+ break;
+ case 0x2836:
+ uint16_dump(level + 1, "CHIPANAREV", frm);
+ break;
+ case 0x2838:
+ uint16_dump(level + 1, "BUILDID_LOADER", frm);
+ break;
+ case 0x2c00:
+ uint32_dump(level + 1, "BT_CLOCK", frm);
+ break;
+ case 0x3005:
+ psnext_dump(level + 1, "PS_NEXT", frm);
+ break;
+ case 0x3006:
+ pssize_dump(level + 1, "PS_SIZE", frm);
+ break;
+ case 0x3008:
+ handle_length_dump(level + 1, "CRYPT_KEY_LENGTH", frm);
+ break;
+ case 0x3009:
+ handle_clock_dump(level + 1, "PICONET_INSTANCE", frm);
+ break;
+ case 0x300a:
+ complex_dump(level + 1, "GET_CLR_EVT", frm);
+ break;
+ case 0x300b:
+ complex_dump(level + 1, "GET_NEXT_BUILDDEF", frm);
+ break;
+ case 0x300e:
+ complex_dump(level + 1, "E2_DEVICE", frm);
+ break;
+ case 0x300f:
+ complex_dump(level + 1, "E2_APP_DATA", frm);
+ break;
+ case 0x3012:
+ psmemtype_dump(level + 1, "PS_MEMORY_TYPE", frm);
+ break;
+ case 0x301c:
+ complex_dump(level + 1, "READ_BUILD_NAME", frm);
+ break;
+ case 0x4001:
+ valueless_dump(level + 1, "COLD_RESET", frm);
+ break;
+ case 0x4002:
+ valueless_dump(level + 1, "WARM_RESET", frm);
+ break;
+ case 0x4003:
+ valueless_dump(level + 1, "COLD_HALT", frm);
+ break;
+ case 0x4004:
+ valueless_dump(level + 1, "WARM_HALT", frm);
+ break;
+ case 0x4005:
+ valueless_dump(level + 1, "INIT_BT_STACK", frm);
+ break;
+ case 0x4006:
+ valueless_dump(level + 1, "ACTIVATE_BT_STACK", frm);
+ break;
+ case 0x4007:
+ valueless_dump(level + 1, "ENABLE_TX", frm);
+ break;
+ case 0x4008:
+ valueless_dump(level + 1, "DISABLE_TX", frm);
+ break;
+ case 0x4009:
+ valueless_dump(level + 1, "RECAL", frm);
+ break;
+ case 0x400d:
+ valueless_dump(level + 1, "PS_FACTORY_RESTORE", frm);
+ break;
+ case 0x400e:
+ valueless_dump(level + 1, "PS_FACTORY_RESTORE_ALL", frm);
+ break;
+ case 0x400f:
+ valueless_dump(level + 1, "PS_DEFRAG_RESET", frm);
+ break;
+ case 0x4011:
+ valueless_dump(level + 1, "HOPPING_ON", frm);
+ break;
+ case 0x4012:
+ valueless_dump(level + 1, "CANCEL_PAGE", frm);
+ break;
+ case 0x4818:
+ uint16_dump(level + 1, "PS_CLR", frm);
+ break;
+ case 0x481c:
+ uint16_dump(level + 1, "MAP_SCO_PCM", frm);
+ break;
+ case 0x482e:
+ uint16_dump(level + 1, "SINGLE_CHAN", frm);
+ break;
+ case 0x5004:
+ radiotest_dump(level + 1, "RADIOTEST", frm);
+ break;
+ case 0x500c:
+ psstores_dump(level + 1, "PS_CLR_STORES", frm);
+ break;
+ case 0x6000:
+ valueless_dump(level + 1, "NO_VARIABLE", frm);
+ break;
+ case 0x6802:
+ uint16_dump(level + 1, "CONFIG_UART", frm);
+ break;
+ case 0x6805:
+ uint16_dump(level + 1, "PANIC_ARG", frm);
+ break;
+ case 0x6806:
+ uint16_dump(level + 1, "FAULT_ARG", frm);
+ break;
+ case 0x6827:
+ int8_dump(level + 1, "MAX_TX_POWER", frm);
+ break;
+ case 0x682b:
+ int8_dump(level + 1, "DEFAULT_TX_POWER", frm);
+ break;
+ case 0x7003:
+ pskey_dump(level + 1, frm);
+ break;
+ default:
+ raw_dump(level + 1, frm);
+ break;
+ }
+}
+
+static char *cid2str(uint8_t cid)
+{
+ switch (cid & 0x3f) {
+ case 0:
+ return "BCSP Internal";
+ case 1:
+ return "BCSP Link";
+ case 2:
+ return "BCCMD";
+ case 3:
+ return "HQ";
+ case 4:
+ return "Device Mgt";
+ case 5:
+ return "HCI Cmd/Evt";
+ case 6:
+ return "HCI ACL";
+ case 7:
+ return "HCI SCO";
+ case 8:
+ return "L2CAP";
+ case 9:
+ return "RFCOMM";
+ case 10:
+ return "SDP";
+ case 11:
+ return "Debug";
+ case 12:
+ return "DFU";
+ case 13:
+ return "VM";
+ case 14:
+ return "Unused";
+ case 15:
+ return "Reserved";
+ default:
+ return "Unknown";
+ }
+}
+
+static char *frag2str(uint8_t frag)
+{
+ switch (frag & 0xc0) {
+ case 0x00:
+ return " middle fragment";
+ case 0x40:
+ return " first fragment";
+ case 0x80:
+ return " last fragment";
+ default:
+ return "";
+ }
+}
+
+void csr_dump(int level, struct frame *frm)
+{
+ uint8_t desc, cid, type;
+ uint16_t handle, master, addr;
+
+ desc = CSR_U8(frm);
+
+ cid = desc & 0x3f;
+
+ switch (cid) {
+ case 2:
+ bccmd_dump(level, frm);
+ break;
+
+ case 20:
+ type = CSR_U8(frm);
+
+ if (!p_filter(FILT_LMP)) {
+ switch (type) {
+ case 0x0f:
+ frm->handle = ((uint8_t *) frm->ptr)[17];
+ frm->master = 0;
+ frm->len--;
+ lmp_dump(level, frm);
+ return;
+ case 0x10:
+ frm->handle = ((uint8_t *) frm->ptr)[17];
+ frm->master = 1;
+ frm->len--;
+ lmp_dump(level, frm);
+ return;
+ case 0x12:
+ handle = CSR_U16(frm);
+ master = CSR_U16(frm);
+ addr = CSR_U16(frm);
+ p_indent(level, frm);
+ printf("FHS: handle %d addr %d (%s)\n", handle,
+ addr, master ? "master" : "slave");
+ if (!master) {
+ char addr[18];
+ p_ba2str((bdaddr_t *) frm->ptr, addr);
+ p_indent(level + 1, frm);
+ printf("bdaddr %s class "
+ "0x%2.2x%2.2x%2.2x\n", addr,
+ ((uint8_t *) frm->ptr)[8],
+ ((uint8_t *) frm->ptr)[7],
+ ((uint8_t *) frm->ptr)[6]);
+ }
+ return;
+ case 0x7b:
+ p_indent(level, frm);
+ printf("LMP(r): duplicate (same SEQN)\n");
+ return;
+ }
+ }
+
+ p_indent(level, frm);
+ printf("CSR: Debug (type 0x%2.2x)\n", type);
+ raw_dump(level, frm);
+ break;
+
+ default:
+ p_indent(level, frm);
+ printf("CSR: %s (channel %d)%s\n", cid2str(cid), cid, frag2str(desc));
+ raw_dump(level, frm);
+ break;
+ }
+}
--- /dev/null
+/*
+ *
+ * BlueZ - Bluetooth protocol stack for Linux
+ *
+ * Copyright (C) 2004-2007 Marcel Holtmann <marcel@holtmann.org>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include <stdio.h>
+#include <errno.h>
+
+#include "parser.h"
+
+void ericsson_dump(int level, struct frame *frm)
+{
+ uint8_t event = get_u8(frm);
+ uint8_t *buf = (uint8_t *) frm->ptr;
+
+ if (event != 0x10) {
+ p_indent(level, frm);
+ printf("Ericsson: event 0x%2.2x\n", event);
+ raw_dump(level, frm);
+ }
+
+ frm->master = !(buf[0] & 0x01);
+ frm->handle = buf[1] | (buf[2] << 8);
+
+ buf[5] = (buf[5] << 1) | (buf[3] & 0x01);
+
+ frm->ptr += 5;
+ frm->len -= 5;
+
+ lmp_dump(level, frm);
+}
--- /dev/null
+/*
+ *
+ * BlueZ - Bluetooth protocol stack for Linux
+ *
+ * Copyright (C) 2000-2002 Maxim Krasnyansky <maxk@qualcomm.com>
+ * Copyright (C) 2003-2007 Marcel Holtmann <marcel@holtmann.org>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include <stdio.h>
+#include <errno.h>
+#include <ctype.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <netinet/in.h>
+
+#include <bluetooth/bluetooth.h>
+#include <bluetooth/hci.h>
+#include <bluetooth/hci_lib.h>
+
+#include "parser.h"
+
+static uint16_t manufacturer = DEFAULT_COMPID;
+
+static inline uint16_t get_manufacturer(void)
+{
+ return (manufacturer == DEFAULT_COMPID ? parser.defcompid : manufacturer);
+}
+
+#define EVENT_NUM 61
+static char *event_str[EVENT_NUM + 1] = {
+ "Unknown",
+ "Inquiry Complete",
+ "Inquiry Result",
+ "Connect Complete",
+ "Connect Request",
+ "Disconn Complete",
+ "Auth Complete",
+ "Remote Name Req Complete",
+ "Encrypt Change",
+ "Change Connection Link Key Complete",
+ "Master Link Key Complete",
+ "Read Remote Supported Features",
+ "Read Remote Ver Info Complete",
+ "QoS Setup Complete",
+ "Command Complete",
+ "Command Status",
+ "Hardware Error",
+ "Flush Occurred",
+ "Role Change",
+ "Number of Completed Packets",
+ "Mode Change",
+ "Return Link Keys",
+ "PIN Code Request",
+ "Link Key Request",
+ "Link Key Notification",
+ "Loopback Command",
+ "Data Buffer Overflow",
+ "Max Slots Change",
+ "Read Clock Offset Complete",
+ "Connection Packet Type Changed",
+ "QoS Violation",
+ "Page Scan Mode Change",
+ "Page Scan Repetition Mode Change",
+ "Flow Specification Complete",
+ "Inquiry Result with RSSI",
+ "Read Remote Extended Features",
+ "Unknown",
+ "Unknown",
+ "Unknown",
+ "Unknown",
+ "Unknown",
+ "Unknown",
+ "Unknown",
+ "Unknown",
+ "Synchronous Connect Complete",
+ "Synchronous Connect Changed",
+ "Sniff Subrate",
+ "Extended Inquiry Result",
+ "Encryption Key Refresh Complete",
+ "IO Capability Request",
+ "IO Capability Response",
+ "User Confirmation Request",
+ "User Passkey Request",
+ "Remote OOB Data Request",
+ "Simple Pairing Complete",
+ "Unknown",
+ "Link Supervision Timeout Change",
+ "Enhanced Flush Complete",
+ "Unknown",
+ "User Passkey Notification",
+ "Keypress Notification",
+ "Remote Host Supported Features Notification",
+};
+
+#define CMD_LINKCTL_NUM 52
+static char *cmd_linkctl_str[CMD_LINKCTL_NUM + 1] = {
+ "Unknown",
+ "Inquiry",
+ "Inquiry Cancel",
+ "Periodic Inquiry Mode",
+ "Exit Periodic Inquiry Mode",
+ "Create Connection",
+ "Disconnect",
+ "Add SCO Connection",
+ "Create Connection Cancel",
+ "Accept Connection Request",
+ "Reject Connection Request",
+ "Link Key Request Reply",
+ "Link Key Request Negative Reply",
+ "PIN Code Request Reply",
+ "PIN Code Request Negative Reply",
+ "Change Connection Packet Type",
+ "Unknown",
+ "Authentication Requested",
+ "Unknown",
+ "Set Connection Encryption",
+ "Unknown",
+ "Change Connection Link Key",
+ "Unknown",
+ "Master Link Key",
+ "Unknown",
+ "Remote Name Request",
+ "Remote Name Request Cancel",
+ "Read Remote Supported Features",
+ "Read Remote Extended Features",
+ "Read Remote Version Information",
+ "Unknown",
+ "Read Clock Offset",
+ "Read LMP Handle",
+ "Unknown",
+ "Unknown",
+ "Unknown",
+ "Unknown",
+ "Unknown",
+ "Unknown",
+ "Unknown",
+ "Setup Synchronous Connection",
+ "Accept Synchronous Connection",
+ "Reject Synchronous Connection",
+ "IO Capability Request Reply",
+ "User Confirmation Request Reply",
+ "User Confirmation Request Negative Reply",
+ "User Passkey Request Reply",
+ "User Passkey Request Negative Reply",
+ "Remote OOB Data Request Reply",
+ "Unknown",
+ "Unknown",
+ "Remote OOB Data Request Negative Reply",
+ "IO Capability Request Negative Reply",
+};
+
+#define CMD_LINKPOL_NUM 17
+static char *cmd_linkpol_str[CMD_LINKPOL_NUM + 1] = {
+ "Unknown",
+ "Hold Mode",
+ "Unknown",
+ "Sniff Mode",
+ "Exit Sniff Mode",
+ "Park State",
+ "Exit Park State",
+ "QoS Setup",
+ "Unknown",
+ "Role Discovery",
+ "Unknown",
+ "Switch Role",
+ "Read Link Policy Settings",
+ "Write Link Policy Settings",
+ "Read Default Link Policy Settings",
+ "Write Default Link Policy Settings",
+ "Flow Specification",
+ "Sniff Subrating",
+};
+
+#define CMD_HOSTCTL_NUM 95
+static char *cmd_hostctl_str[CMD_HOSTCTL_NUM + 1] = {
+ "Unknown",
+ "Set Event Mask",
+ "Unknown",
+ "Reset",
+ "Unknown",
+ "Set Event Filter",
+ "Unknown",
+ "Unknown",
+ "Flush",
+ "Read PIN Type ",
+ "Write PIN Type",
+ "Create New Unit Key",
+ "Unknown",
+ "Read Stored Link Key",
+ "Unknown",
+ "Unknown",
+ "Unknown",
+ "Write Stored Link Key",
+ "Delete Stored Link Key",
+ "Write Local Name",
+ "Read Local Name",
+ "Read Connection Accept Timeout",
+ "Write Connection Accept Timeout",
+ "Read Page Timeout",
+ "Write Page Timeout",
+ "Read Scan Enable",
+ "Write Scan Enable",
+ "Read Page Scan Activity",
+ "Write Page Scan Activity",
+ "Read Inquiry Scan Activity",
+ "Write Inquiry Scan Activity",
+ "Read Authentication Enable",
+ "Write Authentication Enable",
+ "Read Encryption Mode",
+ "Write Encryption Mode",
+ "Read Class of Device",
+ "Write Class of Device",
+ "Read Voice Setting",
+ "Write Voice Setting",
+ "Read Automatic Flush Timeout",
+ "Write Automatic Flush Timeout",
+ "Read Num Broadcast Retransmissions",
+ "Write Num Broadcast Retransmissions",
+ "Read Hold Mode Activity ",
+ "Write Hold Mode Activity",
+ "Read Transmit Power Level",
+ "Read Synchronous Flow Control Enable",
+ "Write Synchronous Flow Control Enable",
+ "Unknown",
+ "Set Host Controller To Host Flow Control",
+ "Unknown",
+ "Host Buffer Size",
+ "Unknown",
+ "Host Number of Completed Packets",
+ "Read Link Supervision Timeout",
+ "Write Link Supervision Timeout",
+ "Read Number of Supported IAC",
+ "Read Current IAC LAP",
+ "Write Current IAC LAP",
+ "Read Page Scan Period Mode",
+ "Write Page Scan Period Mode",
+ "Read Page Scan Mode",
+ "Write Page Scan Mode",
+ "Set AFH Host Channel Classification",
+ "Unknown",
+ "Unknown",
+ "Read Inquiry Scan Type",
+ "Write Inquiry Scan Type",
+ "Read Inquiry Mode",
+ "Write Inquiry Mode",
+ "Read Page Scan Type",
+ "Write Page Scan Type",
+ "Read AFH Channel Assessment Mode",
+ "Write AFH Channel Assessment Mode",
+ "Unknown",
+ "Unknown",
+ "Unknown",
+ "Unknown",
+ "Unknown",
+ "Unknown",
+ "Unknown",
+ "Read Extended Inquiry Response",
+ "Write Extended Inquiry Response",
+ "Refresh Encryption Key",
+ "Unknown",
+ "Read Simple Pairing Mode",
+ "Write Simple Pairing Mode",
+ "Read Local OOB Data",
+ "Read Inquiry Response Transmit Power Level",
+ "Write Inquiry Response Transmit Power Level",
+ "Read Default Erroneous Data Reporting",
+ "Write Default Erroneous Data Reporting",
+ "Unknown",
+ "Unknown",
+ "Unknown",
+ "Enhanced Flush"
+ "Unknown",
+};
+
+#define CMD_INFO_NUM 9
+static char *cmd_info_str[CMD_INFO_NUM + 1] = {
+ "Unknown",
+ "Read Local Version Information",
+ "Read Local Supported Commands",
+ "Read Local Supported Features",
+ "Read Local Extended Features",
+ "Read Buffer Size",
+ "Unknown",
+ "Read Country Code",
+ "Unknown",
+ "Read BD ADDR",
+};
+
+#define CMD_STATUS_NUM 7
+static char *cmd_status_str[CMD_STATUS_NUM + 1] = {
+ "Unknown",
+ "Read Failed Contact Counter",
+ "Reset Failed Contact Counter",
+ "Read Link Quality",
+ "Unknown",
+ "Read RSSI",
+ "Read AFH Channel Map",
+ "Read Clock",
+};
+
+#define CMD_TESTING_NUM 4
+static char *cmd_testing_str[CMD_TESTING_NUM + 1] = {
+ "Unknown",
+ "Read Loopback Mode",
+ "Write Loopback Mode",
+ "Enable Device Under Test mode",
+ "Unknown",
+};
+
+#define ERROR_CODE_NUM 56
+static char *error_code_str[ERROR_CODE_NUM + 1] = {
+ "Success",
+ "Unknown HCI Command",
+ "Unknown Connection Identifier",
+ "Hardware Failure",
+ "Page Timeout",
+ "Authentication Failure",
+ "PIN or Key Missing",
+ "Memory Capacity Exceeded",
+ "Connection Timeout",
+ "Connection Limit Exceeded",
+ "Synchronous Connection to a Device Exceeded",
+ "ACL Connection Already Exists",
+ "Command Disallowed",
+ "Connection Rejected due to Limited Resources",
+ "Connection Rejected due to Security Reasons",
+ "Connection Rejected due to Unacceptable BD_ADDR",
+ "Connection Accept Timeout Exceeded",
+ "Unsupported Feature or Parameter Value",
+ "Invalid HCI Command Parameters",
+ "Remote User Terminated Connection",
+ "Remote Device Terminated Connection due to Low Resources",
+ "Remote Device Terminated Connection due to Power Off",
+ "Connection Terminated by Local Host",
+ "Repeated Attempts",
+ "Pairing Not Allowed",
+ "Unknown LMP PDU",
+ "Unsupported Remote Feature / Unsupported LMP Feature",
+ "SCO Offset Rejected",
+ "SCO Interval Rejected",
+ "SCO Air Mode Rejected",
+ "Invalid LMP Parameters",
+ "Unspecified Error",
+ "Unsupported LMP Parameter Value",
+ "Role Change Not Allowed",
+ "LMP Response Timeout",
+ "LMP Error Transaction Collision",
+ "LMP PDU Not Allowed",
+ "Encryption Mode Not Acceptable",
+ "Link Key Can Not be Changed",
+ "Requested QoS Not Supported",
+ "Instant Passed",
+ "Pairing with Unit Key Not Supported",
+ "Different Transaction Collision",
+ "Reserved",
+ "QoS Unacceptable Parameter",
+ "QoS Rejected",
+ "Channel Classification Not Supported",
+ "Insufficient Security",
+ "Parameter out of Mandatory Range",
+ "Reserved",
+ "Role Switch Pending",
+ "Reserved",
+ "Reserved Slot Violation",
+ "Role Switch Failed",
+ "Extended Inquiry Response Too Large",
+ "Simple Pairing Not Supported by Host",
+ "Host Busy - Pairing",
+};
+
+static char *status2str(uint8_t status)
+{
+ char *str;
+
+ if (status <= ERROR_CODE_NUM)
+ str = error_code_str[status];
+ else
+ str = "Unknown";
+
+ return str;
+}
+
+static char *opcode2str(uint16_t opcode)
+{
+ uint16_t ogf = cmd_opcode_ogf(opcode);
+ uint16_t ocf = cmd_opcode_ocf(opcode);
+ char *cmd;
+
+ switch (ogf) {
+ case OGF_INFO_PARAM:
+ if (ocf <= CMD_INFO_NUM)
+ cmd = cmd_info_str[ocf];
+ else
+ cmd = "Unknown";
+ break;
+
+ case OGF_HOST_CTL:
+ if (ocf <= CMD_HOSTCTL_NUM)
+ cmd = cmd_hostctl_str[ocf];
+ else
+ cmd = "Unknown";
+ break;
+
+ case OGF_LINK_CTL:
+ if (ocf <= CMD_LINKCTL_NUM)
+ cmd = cmd_linkctl_str[ocf];
+ else
+ cmd = "Unknown";
+ break;
+
+ case OGF_LINK_POLICY:
+ if (ocf <= CMD_LINKPOL_NUM)
+ cmd = cmd_linkpol_str[ocf];
+ else
+ cmd = "Unknown";
+ break;
+
+ case OGF_STATUS_PARAM:
+ if (ocf <= CMD_STATUS_NUM)
+ cmd = cmd_status_str[ocf];
+ else
+ cmd = "Unknown";
+ break;
+
+ case OGF_TESTING_CMD:
+ if (ocf <= CMD_TESTING_NUM)
+ cmd = cmd_testing_str[ocf];
+ else
+ cmd = "Unknown";
+ break;
+
+ case OGF_VENDOR_CMD:
+ cmd = "Vendor";
+ break;
+
+ default:
+ cmd = "Unknown";
+ break;
+ }
+
+ return cmd;
+}
+
+static char *linktype2str(uint8_t type)
+{
+ switch (type) {
+ case 0x00:
+ return "SCO";
+ case 0x01:
+ return "ACL";
+ case 0x02:
+ return "eSCO";
+ default:
+ return "Unknown";
+ }
+}
+
+static char *role2str(uint8_t role)
+{
+ switch (role) {
+ case 0x00:
+ return "Master";
+ case 0x01:
+ return "Slave";
+ default:
+ return "Unknown";
+ }
+}
+
+static char *mode2str(uint8_t mode)
+{
+ switch (mode) {
+ case 0x00:
+ return "Active";
+ case 0x01:
+ return "Hold";
+ case 0x02:
+ return "Sniff";
+ case 0x03:
+ return "Park";
+ default:
+ return "Unknown";
+ }
+}
+
+static char *airmode2str(uint8_t mode)
+{
+ switch (mode) {
+ case 0x00:
+ return "u-law log";
+ case 0x01:
+ return "A-law log";
+ case 0x02:
+ return "CVSD";
+ case 0x04:
+ return "Transparent data";
+ default:
+ return "Reserved";
+ }
+}
+
+static char *keytype2str(uint8_t type)
+{
+ switch (type) {
+ case 0x00:
+ return "Combination Key";
+ case 0x01:
+ return "Local Unit Key";
+ case 0x02:
+ return "Remote Unit Key";
+ case 0x03:
+ return "Debug Combination Key";
+ case 0x04:
+ return "Unauthenticated Combination Key";
+ case 0x05:
+ return "Authenticated Combination Key";
+ case 0x06:
+ return "Changed Combination Key";
+ default:
+ return "Reserved";
+ }
+}
+
+static char *capability2str(uint8_t capability)
+{
+ switch (capability) {
+ case 0x00:
+ return "DisplayOnly";
+ case 0x01:
+ return "DisplayYesNo";
+ case 0x02:
+ return "KeyboardOnly";
+ case 0x03:
+ return "NoInputNoOutput";
+ default:
+ return "Reserved";
+ }
+}
+
+static char *authentication2str(uint8_t authentication)
+{
+ switch (authentication) {
+ case 0x00:
+ return "No Bonding (No MITM Protection)";
+ case 0x01:
+ return "No Bonding (MITM Protection)";
+ case 0x02:
+ return "Dedicated Bonding (No MITM Protection)";
+ case 0x03:
+ return "Dedicated Bonding (MITM Protection)";
+ case 0x04:
+ return "General Bonding (No MITM Protection)";
+ case 0x05:
+ return "General Bonding (MITM Protection)";
+ default:
+ return "Reserved";
+ }
+}
+
+static inline void ext_inquiry_response_dump(int level, struct frame *frm)
+{
+ void *ptr = frm->ptr;
+ uint32_t len = frm->len;
+ uint8_t type, length;
+ char *str;
+ int i;
+
+ length = get_u8(frm);
+
+ while (length > 0) {
+ type = get_u8(frm);
+ length--;
+
+ switch (type) {
+ case 0x01:
+ p_indent(level, frm);
+ printf("Flags:");
+ for (i = 0; i < length; i++)
+ printf(" 0x%2.2x", *((uint8_t *) (frm->ptr + i)));
+ printf("\n");
+ break;
+
+ case 0x02:
+ case 0x03:
+ p_indent(level, frm);
+ printf("%s service classes:",
+ type == 0x02 ? "Shortened" : "Complete");
+ for (i = 0; i < length / 2; i++) {
+ uint16_t val = btohs(bt_get_unaligned((uint16_t *) (frm->ptr + (i * 2))));
+ printf(" 0x%4.4x", val);
+ }
+ printf("\n");
+ break;
+
+ case 0x08:
+ case 0x09:
+ str = malloc(length + 1);
+ if (str) {
+ snprintf(str, length + 1, "%s", (char *) frm->ptr);
+ for (i = 0; i < length; i++)
+ if (!isprint(str[i]))
+ str[i] = '.';
+ p_indent(level, frm);
+ printf("%s local name: \'%s\'\n",
+ type == 0x08 ? "Shortened" : "Complete", str);
+ free(str);
+ }
+ break;
+
+ case 0x0a:
+ p_indent(level, frm);
+ printf("TX power level: %d\n", *((uint8_t *) frm->ptr));
+ break;
+
+ default:
+ p_indent(level, frm);
+ printf("Unknown type 0x%02x with %d bytes data\n",
+ type, length);
+ break;
+ }
+
+ frm->ptr += length;
+ frm->len -= length;
+
+ length = get_u8(frm);
+ }
+
+ frm->ptr = ptr + (EXTENDED_INQUIRY_INFO_SIZE - INQUIRY_INFO_WITH_RSSI_SIZE);
+ frm->len = len + (EXTENDED_INQUIRY_INFO_SIZE - INQUIRY_INFO_WITH_RSSI_SIZE);
+}
+
+static inline void bdaddr_command_dump(int level, struct frame *frm)
+{
+ bdaddr_t *bdaddr = frm->ptr;
+ char addr[18];
+
+ frm->ptr += sizeof(bdaddr_t);
+ frm->len -= sizeof(bdaddr_t);
+
+ p_indent(level, frm);
+ p_ba2str(bdaddr, addr);
+ printf("bdaddr %s\n", addr);
+
+ raw_dump(level, frm);
+}
+
+static inline void generic_command_dump(int level, struct frame *frm)
+{
+ uint16_t handle = btohs(htons(get_u16(frm)));
+
+ p_indent(level, frm);
+ printf("handle %d\n", handle);
+
+ raw_dump(level, frm);
+}
+
+static inline void generic_write_mode_dump(int level, struct frame *frm)
+{
+ uint8_t mode = get_u8(frm);
+
+ p_indent(level, frm);
+ printf("mode 0x%2.2x\n", mode);
+}
+
+static inline void inquiry_dump(int level, struct frame *frm)
+{
+ inquiry_cp *cp = frm->ptr;
+
+ p_indent(level, frm);
+ printf("lap 0x%2.2x%2.2x%2.2x len %d num %d\n",
+ cp->lap[2], cp->lap[1], cp->lap[0], cp->length, cp->num_rsp);
+}
+
+static inline void periodic_inquiry_dump(int level, struct frame *frm)
+{
+ periodic_inquiry_cp *cp = frm->ptr;
+
+ p_indent(level, frm);
+ printf("max %d min %d lap 0x%2.2x%2.2x%2.2x len %d num %d\n",
+ btohs(cp->max_period), btohs(cp->min_period),
+ cp->lap[2], cp->lap[1], cp->lap[0], cp->length, cp->num_rsp);
+}
+
+static inline void create_conn_dump(int level, struct frame *frm)
+{
+ create_conn_cp *cp = frm->ptr;
+ uint16_t ptype = btohs(cp->pkt_type);
+ uint16_t clkoffset = btohs(cp->clock_offset);
+ char addr[18], *str;
+
+ p_indent(level, frm);
+ p_ba2str(&cp->bdaddr, addr);
+ printf("bdaddr %s ptype 0x%4.4x rswitch 0x%2.2x clkoffset 0x%4.4x%s\n",
+ addr, ptype, cp->role_switch,
+ clkoffset & 0x7fff, clkoffset & 0x8000 ? " (valid)" : "");
+
+ str = hci_ptypetostr(ptype);
+ if (str) {
+ p_indent(level, frm);
+ printf("Packet type: %s\n", str);
+ free(str);
+ }
+}
+
+static inline void disconnect_dump(int level, struct frame *frm)
+{
+ disconnect_cp *cp = frm->ptr;
+
+ p_indent(level, frm);
+ printf("handle %d reason 0x%2.2x\n", btohs(cp->handle), cp->reason);
+
+ p_indent(level, frm);
+ printf("Reason: %s\n", status2str(cp->reason));
+}
+
+static inline void add_sco_dump(int level, struct frame *frm)
+{
+ add_sco_cp *cp = frm->ptr;
+ uint16_t ptype = btohs(cp->pkt_type);
+ char *str;
+
+ p_indent(level, frm);
+ printf("handle %d ptype 0x%4.4x\n", btohs(cp->handle), ptype);
+
+ str = hci_ptypetostr(ptype);
+ if (str) {
+ p_indent(level, frm);
+ printf("Packet type: %s\n", str);
+ free(str);
+ }
+}
+
+static inline void accept_conn_req_dump(int level, struct frame *frm)
+{
+ accept_conn_req_cp *cp = frm->ptr;
+ char addr[18];
+
+ p_indent(level, frm);
+ p_ba2str(&cp->bdaddr, addr);
+ printf("bdaddr %s role 0x%2.2x\n", addr, cp->role);
+
+ p_indent(level, frm);
+ printf("Role: %s\n", role2str(cp->role));
+}
+
+static inline void reject_conn_req_dump(int level, struct frame *frm)
+{
+ reject_conn_req_cp *cp = frm->ptr;
+ char addr[18];
+
+ p_indent(level, frm);
+ p_ba2str(&cp->bdaddr, addr);
+ printf("bdaddr %s reason 0x%2.2x\n", addr, cp->reason);
+
+ p_indent(level, frm);
+ printf("Reason: %s\n", status2str(cp->reason));
+}
+
+static inline void pin_code_reply_dump(int level, struct frame *frm)
+{
+ pin_code_reply_cp *cp = frm->ptr;
+ char addr[18], pin[17];
+
+ p_indent(level, frm);
+ p_ba2str(&cp->bdaddr, addr);
+ memset(pin, 0, sizeof(pin));
+ if (parser.flags & DUMP_NOVENDOR)
+ memset(pin, '*', cp->pin_len);
+ else
+ memcpy(pin, cp->pin_code, cp->pin_len);
+ printf("bdaddr %s len %d pin \'%s\'\n", addr, cp->pin_len, pin);
+}
+
+static inline void link_key_reply_dump(int level, struct frame *frm)
+{
+ link_key_reply_cp *cp = frm->ptr;
+ char addr[18];
+ int i;
+
+ p_indent(level, frm);
+ p_ba2str(&cp->bdaddr, addr);
+ printf("bdaddr %s key ", addr);
+ for (i = 0; i < 16; i++)
+ if (parser.flags & DUMP_NOVENDOR)
+ printf("**");
+ else
+ printf("%2.2X", cp->link_key[i]);
+ printf("\n");
+}
+
+static inline void pin_code_neg_reply_dump(int level, struct frame *frm)
+{
+ bdaddr_t *bdaddr = frm->ptr;
+ char addr[18];
+
+ p_indent(level, frm);
+ p_ba2str(bdaddr, addr);
+ printf("bdaddr %s\n", addr);
+}
+
+static inline void user_passkey_reply_dump(int level, struct frame *frm)
+{
+ user_passkey_reply_cp *cp = frm->ptr;
+ char addr[18];
+
+ p_indent(level, frm);
+ p_ba2str(&cp->bdaddr, addr);
+ printf("bdaddr %s passkey %d\n", addr, btohl(cp->passkey));
+}
+
+static inline void remote_oob_data_reply_dump(int level, struct frame *frm)
+{
+ remote_oob_data_reply_cp *cp = frm->ptr;
+ char addr[18];
+ int i;
+
+ p_indent(level, frm);
+ p_ba2str(&cp->bdaddr, addr);
+ printf("bdaddr %s\n", addr);
+
+ p_indent(level, frm);
+ printf("hash 0x");
+ for (i = 0; i < 16; i++)
+ printf("%02x", cp->hash[i]);
+ printf("\n");
+
+ p_indent(level, frm);
+ printf("randomizer 0x");
+ for (i = 0; i < 16; i++)
+ printf("%02x", cp->randomizer[i]);
+ printf("\n");
+}
+
+static inline void io_capability_reply_dump(int level, struct frame *frm)
+{
+ io_capability_reply_cp *cp = frm->ptr;
+ char addr[18];
+
+ p_indent(level, frm);
+ p_ba2str(&cp->bdaddr, addr);
+ printf("bdaddr %s capability 0x%2.2x oob 0x%2.2x auth 0x%2.2x\n",
+ addr, cp->capability, cp->oob_data,
+ cp->authentication);
+
+ p_indent(level, frm);
+ printf("Capability: %s (OOB data %s)\n",
+ capability2str(cp->capability),
+ cp->oob_data == 0x00 ? "not present" : "available");
+
+ p_indent(level, frm);
+ printf("Authentication: %s\n", authentication2str(cp->authentication));
+}
+
+static inline void set_conn_encrypt_dump(int level, struct frame *frm)
+{
+ set_conn_encrypt_cp *cp = frm->ptr;
+
+ p_indent(level, frm);
+ printf("handle %d encrypt 0x%2.2x\n", btohs(cp->handle), cp->encrypt);
+}
+
+static inline void remote_name_req_dump(int level, struct frame *frm)
+{
+ remote_name_req_cp *cp = frm->ptr;
+ uint16_t clkoffset = btohs(cp->clock_offset);
+ char addr[18];
+
+ p_indent(level, frm);
+ p_ba2str(&cp->bdaddr, addr);
+ printf("bdaddr %s mode %d clkoffset 0x%4.4x%s\n",
+ addr, cp->pscan_rep_mode,
+ clkoffset & 0x7fff, clkoffset & 0x8000 ? " (valid)" : "");
+}
+
+static inline void master_link_key_dump(int level, struct frame *frm)
+{
+ master_link_key_cp *cp = frm->ptr;
+
+ p_indent(level, frm);
+ printf("flag %d\n", cp->key_flag);
+}
+
+static inline void read_remote_ext_features_dump(int level, struct frame *frm)
+{
+ read_remote_ext_features_cp *cp = frm->ptr;
+
+ p_indent(level, frm);
+ printf("handle %d page %d\n", btohs(cp->handle), cp->page_num);
+}
+
+static inline void setup_sync_conn_dump(int level, struct frame *frm)
+{
+ setup_sync_conn_cp *cp = frm->ptr;
+
+ p_indent(level, frm);
+ printf("handle %d voice setting 0x%4.4x\n", btohs(cp->handle),
+ btohs(cp->voice_setting));
+}
+
+static inline void hold_mode_dump(int level, struct frame *frm)
+{
+ hold_mode_cp *cp = frm->ptr;
+
+ p_indent(level, frm);
+ printf("handle %d max %d min %d\n", btohs(cp->handle),
+ btohs(cp->max_interval), btohs(cp->min_interval));
+}
+
+static inline void sniff_mode_dump(int level, struct frame *frm)
+{
+ sniff_mode_cp *cp = frm->ptr;
+
+ p_indent(level, frm);
+ printf("handle %d max %d min %d attempt %d timeout %d\n",
+ btohs(cp->handle), btohs(cp->max_interval),
+ btohs(cp->min_interval), btohs(cp->attempt), btohs(cp->timeout));
+}
+
+static inline void qos_setup_dump(int level, struct frame *frm)
+{
+ qos_setup_cp *cp = frm->ptr;
+
+ p_indent(level, frm);
+ printf("handle %d flags 0x%2.2x\n", btohs(cp->handle), cp->flags);
+
+ p_indent(level, frm);
+ printf("Service type: %d\n", cp->qos.service_type);
+ p_indent(level, frm);
+ printf("Token rate: %d\n", btohl(cp->qos.token_rate));
+ p_indent(level, frm);
+ printf("Peak bandwith: %d\n", btohl(cp->qos.peak_bandwidth));
+ p_indent(level, frm);
+ printf("Latency: %d\n", btohl(cp->qos.latency));
+ p_indent(level, frm);
+ printf("Delay variation: %d\n", btohl(cp->qos.delay_variation));
+}
+
+static inline void write_link_policy_dump(int level, struct frame *frm)
+{
+ write_link_policy_cp *cp = frm->ptr;
+ uint16_t policy = btohs(cp->policy);
+ char *str;
+
+ p_indent(level, frm);
+ printf("handle %d policy 0x%2.2x\n", btohs(cp->handle), policy);
+
+ str = hci_lptostr(policy);
+ if (str) {
+ p_indent(level, frm);
+ printf("Link policy: %s\n", str);
+ free(str);
+ }
+}
+
+static inline void sniff_subrating_dump(int level, struct frame *frm)
+{
+ sniff_subrating_cp *cp = frm->ptr;
+
+ p_indent(level, frm);
+ printf("handle %d\n", btohs(cp->handle));
+
+ p_indent(level, frm);
+ printf("max latency %d\n", btohs(cp->max_latency));
+
+ p_indent(level, frm);
+ printf("min timeout remote %d local %d\n",
+ btohs(cp->min_remote_timeout), btohs(cp->min_local_timeout));
+}
+
+static inline void set_event_mask_dump(int level, struct frame *frm)
+{
+ set_event_mask_cp *cp = frm->ptr;
+ int i;
+
+ p_indent(level, frm);
+ printf("Mask: 0x");
+ for (i = 0; i < 8; i++)
+ printf("%2.2x", cp->mask[i]);
+ printf("\n");
+}
+
+static inline void set_event_flt_dump(int level, struct frame *frm)
+{
+ set_event_flt_cp *cp = frm->ptr;
+ uint8_t dev_class[3], dev_mask[3];
+ char addr[18];
+
+ p_indent(level, frm);
+ printf("type %d condition %d\n", cp->flt_type,
+ (cp->flt_type == 0) ? 0 : cp->cond_type);
+
+ switch (cp->flt_type) {
+ case FLT_CLEAR_ALL:
+ p_indent(level, frm);
+ printf("Clear all filters\n");
+ break;
+ case FLT_INQ_RESULT:
+ p_indent(level, frm);
+ printf("Inquiry result");
+ switch (cp->cond_type) {
+ case INQ_RESULT_RETURN_ALL:
+ printf(" for all devices\n");
+ break;
+ case INQ_RESULT_RETURN_CLASS:
+ memcpy(dev_class, cp->condition, 3);
+ memcpy(dev_mask, cp->condition + 3, 3);
+ printf(" with class 0x%2.2x%2.2x%2.2x mask 0x%2.2x%2.2x%2.2x\n",
+ dev_class[2], dev_class[1], dev_class[0],
+ dev_mask[2], dev_mask[1], dev_mask[0]);
+ break;
+ case INQ_RESULT_RETURN_BDADDR:
+ p_ba2str((bdaddr_t *) cp->condition, addr);
+ printf(" with bdaddr %s\n", addr);
+ break;
+ default:
+ printf("\n");
+ break;
+ }
+ break;
+ case FLT_CONN_SETUP:
+ p_indent(level, frm);
+ printf("Connection setup");
+ switch (cp->cond_type) {
+ case CONN_SETUP_ALLOW_ALL:
+ case CONN_SETUP_ALLOW_CLASS:
+ case CONN_SETUP_ALLOW_BDADDR:
+ default:
+ printf("\n");
+ break;
+ }
+ break;
+ }
+}
+
+static inline void write_pin_type_dump(int level, struct frame *frm)
+{
+ write_pin_type_cp *cp = frm->ptr;
+
+ p_indent(level, frm);
+ printf("type %d\n", cp->pin_type);
+}
+
+static inline void request_stored_link_key_dump(int level, struct frame *frm)
+{
+ read_stored_link_key_cp *cp = frm->ptr;
+ char addr[18];
+
+ p_indent(level, frm);
+ p_ba2str(&cp->bdaddr, addr);
+ printf("bdaddr %s all %d\n", addr, cp->read_all);
+}
+
+static inline void return_link_keys_dump(int level, struct frame *frm)
+{
+ uint8_t num = get_u8(frm);
+ uint8_t key[16];
+ char addr[18];
+ int i, n;
+
+ for (n = 0; n < num; n++) {
+ p_ba2str(frm->ptr, addr);
+ memcpy(key, frm->ptr + 6, 16);
+
+ p_indent(level, frm);
+ printf("bdaddr %s key ", addr);
+ for (i = 0; i < 16; i++)
+ if (parser.flags & DUMP_NOVENDOR)
+ printf("**");
+ else
+ printf("%2.2X", key[i]);
+ printf("\n");
+
+ frm->ptr += 2;
+ frm->len -= 2;
+ }
+}
+
+static inline void change_local_name_dump(int level, struct frame *frm)
+{
+ change_local_name_cp *cp = frm->ptr;
+ char name[249];
+ int i;
+
+ memset(name, 0, sizeof(name));
+ for (i = 0; i < 248 && cp->name[i]; i++)
+ if (isprint(cp->name[i]))
+ name[i] = cp->name[i];
+ else
+ name[i] = '.';
+
+ p_indent(level, frm);
+ printf("name \'%s\'\n", name);
+}
+
+static inline void write_class_of_dev_dump(int level, struct frame *frm)
+{
+ write_class_of_dev_cp *cp = frm->ptr;
+
+ p_indent(level, frm);
+ printf("class 0x%2.2x%2.2x%2.2x\n",
+ cp->dev_class[2], cp->dev_class[1], cp->dev_class[0]);
+}
+
+static inline void write_voice_setting_dump(int level, struct frame *frm)
+{
+ write_voice_setting_cp *cp = frm->ptr;
+
+ p_indent(level, frm);
+ printf("voice setting 0x%4.4x\n", btohs(cp->voice_setting));
+}
+
+static inline void write_current_iac_lap_dump(int level, struct frame *frm)
+{
+ write_current_iac_lap_cp *cp = frm->ptr;
+ int i;
+
+ for (i = 0; i < cp->num_current_iac; i++) {
+ p_indent(level, frm);
+ printf("IAC 0x%2.2x%2.2x%2.2x", cp->lap[i][2], cp->lap[i][1], cp->lap[i][0]);
+ if (cp->lap[i][2] == 0x9e && cp->lap[i][1] == 0x8b) {
+ switch (cp->lap[i][0]) {
+ case 0x00:
+ printf(" (Limited Inquiry Access Code)");
+ break;
+ case 0x33:
+ printf(" (General Inquiry Access Code)");
+ break;
+ }
+ }
+ printf("\n");
+ }
+}
+
+static inline void write_scan_enable_dump(int level, struct frame *frm)
+{
+ uint8_t enable = get_u8(frm);
+
+ p_indent(level, frm);
+ printf("enable %d\n", enable);
+}
+
+static inline void write_page_timeout_dump(int level, struct frame *frm)
+{
+ write_page_timeout_cp *cp = frm->ptr;
+
+ p_indent(level, frm);
+ printf("timeout %d\n", btohs(cp->timeout));
+}
+
+static inline void write_page_activity_dump(int level, struct frame *frm)
+{
+ write_page_activity_cp *cp = frm->ptr;
+
+ p_indent(level, frm);
+ printf("interval %d window %d\n", btohs(cp->interval), btohs(cp->window));
+}
+
+static inline void write_inquiry_scan_type_dump(int level, struct frame *frm)
+{
+ write_inquiry_scan_type_cp *cp = frm->ptr;
+
+ p_indent(level, frm);
+ printf("type %d\n", cp->type);
+}
+
+static inline void write_inquiry_mode_dump(int level, struct frame *frm)
+{
+ write_inquiry_mode_cp *cp = frm->ptr;
+
+ p_indent(level, frm);
+ printf("mode %d\n", cp->mode);
+}
+
+static inline void set_afh_classification_dump(int level, struct frame *frm)
+{
+ set_afh_classification_cp *cp = frm->ptr;
+ int i;
+
+ p_indent(level, frm);
+ printf("map 0x");
+ for (i = 0; i < 10; i++)
+ printf("%02x", cp->map[i]);
+ printf("\n");
+}
+
+static inline void write_link_supervision_timeout_dump(int level, struct frame *frm)
+{
+ write_link_supervision_timeout_cp *cp = frm->ptr;
+
+ p_indent(level, frm);
+ printf("handle %d timeout %d\n",
+ btohs(cp->handle), btohs(cp->timeout));
+}
+
+static inline void write_ext_inquiry_response_dump(int level, struct frame *frm)
+{
+ write_ext_inquiry_response_cp *cp = frm->ptr;
+
+ p_indent(level, frm);
+ printf("fec 0x%2.2x\n", cp->fec);
+
+ frm->ptr++;
+ frm->len--;
+
+ ext_inquiry_response_dump(level, frm);
+}
+
+static inline void write_inquiry_transmit_power_level_dump(int level, struct frame *frm)
+{
+ write_inquiry_transmit_power_level_cp *cp = frm->ptr;
+
+ p_indent(level, frm);
+ printf("level %d\n", cp->level);
+}
+
+static inline void write_default_error_data_reporting_dump(int level, struct frame *frm)
+{
+ write_default_error_data_reporting_cp *cp = frm->ptr;
+
+ p_indent(level, frm);
+ printf("reporting %d\n", cp->reporting);
+}
+
+static inline void enhanced_flush_dump(int level, struct frame *frm)
+{
+ enhanced_flush_cp *cp = frm->ptr;
+
+ p_indent(level, frm);
+ printf("handle %d type %d\n", btohs(cp->handle), cp->type);
+}
+
+static inline void send_keypress_notify_dump(int level, struct frame *frm)
+{
+ send_keypress_notify_cp *cp = frm->ptr;
+ char addr[18];
+
+ p_indent(level, frm);
+ p_ba2str(&cp->bdaddr, addr);
+ printf("bdaddr %s type %d\n", addr, cp->type);
+}
+
+static inline void request_transmit_power_level_dump(int level, struct frame *frm)
+{
+ read_transmit_power_level_cp *cp = frm->ptr;
+
+ p_indent(level, frm);
+ printf("handle %d type %d (%s)\n",
+ btohs(cp->handle), cp->type,
+ cp->type ? "maximum" : "current");
+}
+
+static inline void request_local_ext_features_dump(int level, struct frame *frm)
+{
+ read_local_ext_features_cp *cp = frm->ptr;
+
+ p_indent(level, frm);
+ printf("page %d\n", cp->page_num);
+}
+
+static inline void request_clock_dump(int level, struct frame *frm)
+{
+ read_clock_cp *cp = frm->ptr;
+
+ p_indent(level, frm);
+ printf("handle %d which %d (%s)\n",
+ btohs(cp->handle), cp->which_clock,
+ cp->which_clock ? "piconet" : "local");
+}
+
+static inline void host_buffer_size_dump(int level, struct frame *frm)
+{
+ host_buffer_size_cp *cp = frm->ptr;
+
+ p_indent(level, frm);
+ printf("ACL MTU %d:%d SCO MTU %d:%d\n",
+ btohs(cp->acl_mtu), btohs(cp->acl_max_pkt),
+ cp->sco_mtu, btohs(cp->sco_max_pkt));
+}
+
+static inline void num_comp_pkts_dump(int level, struct frame *frm)
+{
+ uint8_t num = get_u8(frm);
+ uint16_t handle, packets;
+ int i;
+
+ for (i = 0; i < num; i++) {
+ handle = btohs(htons(get_u16(frm)));
+ packets = btohs(htons(get_u16(frm)));
+
+ p_indent(level, frm);
+ printf("handle %d packets %d\n", handle, packets);
+ }
+}
+
+static inline void command_dump(int level, struct frame *frm)
+{
+ hci_command_hdr *hdr = frm->ptr;
+ uint16_t opcode = btohs(hdr->opcode);
+ uint16_t ogf = cmd_opcode_ogf(opcode);
+ uint16_t ocf = cmd_opcode_ocf(opcode);
+
+ if (p_filter(FILT_HCI))
+ return;
+
+ if (ogf == OGF_VENDOR_CMD && (parser.flags & DUMP_NOVENDOR))
+ return;
+
+ p_indent(level, frm);
+ printf("HCI Command: %s (0x%2.2x|0x%4.4x) plen %d\n",
+ opcode2str(opcode), ogf, ocf, hdr->plen);
+
+ frm->ptr += HCI_COMMAND_HDR_SIZE;
+ frm->len -= HCI_COMMAND_HDR_SIZE;
+
+ if (ogf == OGF_VENDOR_CMD) {
+ if (ocf == 0 && get_manufacturer() == 10) {
+ csr_dump(level + 1, frm);
+ return;
+ }
+ }
+
+ if (!(parser.flags & DUMP_VERBOSE)) {
+ raw_dump(level, frm);
+ return;
+ }
+
+ switch (ogf) {
+ case OGF_LINK_CTL:
+ switch (ocf) {
+ case OCF_INQUIRY:
+ inquiry_dump(level + 1, frm);
+ return;
+ case OCF_PERIODIC_INQUIRY:
+ periodic_inquiry_dump(level + 1, frm);
+ return;
+ case OCF_INQUIRY_CANCEL:
+ case OCF_EXIT_PERIODIC_INQUIRY:
+ return;
+ case OCF_CREATE_CONN:
+ create_conn_dump(level + 1, frm);
+ return;
+ case OCF_DISCONNECT:
+ disconnect_dump(level + 1, frm);
+ return;
+ case OCF_CREATE_CONN_CANCEL:
+ case OCF_REMOTE_NAME_REQ_CANCEL:
+ case OCF_ACCEPT_SYNC_CONN_REQ:
+ bdaddr_command_dump(level + 1, frm);
+ return;
+ case OCF_ADD_SCO:
+ case OCF_SET_CONN_PTYPE:
+ add_sco_dump(level + 1, frm);
+ return;
+ case OCF_ACCEPT_CONN_REQ:
+ accept_conn_req_dump(level + 1, frm);
+ return;
+ case OCF_REJECT_CONN_REQ:
+ case OCF_REJECT_SYNC_CONN_REQ:
+ case OCF_IO_CAPABILITY_NEG_REPLY:
+ reject_conn_req_dump(level + 1, frm);
+ return;
+ case OCF_PIN_CODE_REPLY:
+ pin_code_reply_dump(level + 1, frm);
+ return;
+ case OCF_LINK_KEY_REPLY:
+ link_key_reply_dump(level + 1, frm);
+ return;
+ case OCF_PIN_CODE_NEG_REPLY:
+ case OCF_LINK_KEY_NEG_REPLY:
+ case OCF_USER_CONFIRM_REPLY:
+ case OCF_USER_CONFIRM_NEG_REPLY:
+ case OCF_USER_PASSKEY_NEG_REPLY:
+ case OCF_REMOTE_OOB_DATA_NEG_REPLY:
+ pin_code_neg_reply_dump(level + 1, frm);
+ return;
+ case OCF_USER_PASSKEY_REPLY:
+ user_passkey_reply_dump(level + 1, frm);
+ return;
+ case OCF_REMOTE_OOB_DATA_REPLY:
+ remote_oob_data_reply_dump(level + 1, frm);
+ return;
+ case OCF_IO_CAPABILITY_REPLY:
+ io_capability_reply_dump(level + 1, frm);
+ return;
+ case OCF_SET_CONN_ENCRYPT:
+ set_conn_encrypt_dump(level + 1, frm);
+ return;
+ case OCF_AUTH_REQUESTED:
+ case OCF_CHANGE_CONN_LINK_KEY:
+ case OCF_READ_REMOTE_FEATURES:
+ case OCF_READ_REMOTE_VERSION:
+ case OCF_READ_CLOCK_OFFSET:
+ case OCF_READ_LMP_HANDLE:
+ generic_command_dump(level + 1, frm);
+ return;
+ case OCF_MASTER_LINK_KEY:
+ master_link_key_dump(level + 1, frm);
+ return;
+ case OCF_READ_REMOTE_EXT_FEATURES:
+ read_remote_ext_features_dump(level + 1, frm);
+ return;
+ case OCF_REMOTE_NAME_REQ:
+ remote_name_req_dump(level + 1, frm);
+ return;
+ case OCF_SETUP_SYNC_CONN:
+ setup_sync_conn_dump(level + 1, frm);
+ return;
+ }
+ break;
+
+ case OGF_LINK_POLICY:
+ switch (ocf) {
+ case OCF_HOLD_MODE:
+ case OCF_PARK_MODE:
+ hold_mode_dump(level + 1, frm);
+ return;
+ case OCF_SNIFF_MODE:
+ sniff_mode_dump(level + 1, frm);
+ return;
+ case OCF_EXIT_SNIFF_MODE:
+ case OCF_EXIT_PARK_MODE:
+ case OCF_ROLE_DISCOVERY:
+ case OCF_READ_LINK_POLICY:
+ generic_command_dump(level + 1, frm);
+ return;
+ case OCF_SWITCH_ROLE:
+ accept_conn_req_dump(level + 1, frm);
+ return;
+ case OCF_QOS_SETUP:
+ qos_setup_dump(level + 1, frm);
+ return;
+ case OCF_WRITE_LINK_POLICY:
+ write_link_policy_dump(level + 1, frm);
+ return;
+ case OCF_SNIFF_SUBRATING:
+ sniff_subrating_dump(level + 1, frm);
+ return;
+ }
+ break;
+
+ case OGF_HOST_CTL:
+ switch (ocf) {
+ case OCF_RESET:
+ case OCF_CREATE_NEW_UNIT_KEY:
+ return;
+ case OCF_SET_EVENT_MASK:
+ set_event_mask_dump(level + 1, frm);
+ return;
+ case OCF_SET_EVENT_FLT:
+ set_event_flt_dump(level + 1, frm);
+ return;
+ case OCF_WRITE_PIN_TYPE:
+ write_pin_type_dump(level + 1, frm);
+ return;
+ case OCF_READ_STORED_LINK_KEY:
+ case OCF_DELETE_STORED_LINK_KEY:
+ request_stored_link_key_dump(level + 1, frm);
+ return;
+ case OCF_WRITE_STORED_LINK_KEY:
+ return_link_keys_dump(level + 1, frm);
+ return;
+ case OCF_CHANGE_LOCAL_NAME:
+ change_local_name_dump(level + 1, frm);
+ return;
+ case OCF_WRITE_CLASS_OF_DEV:
+ write_class_of_dev_dump(level + 1, frm);
+ return;
+ case OCF_WRITE_VOICE_SETTING:
+ write_voice_setting_dump(level + 1, frm);
+ return;
+ case OCF_WRITE_CURRENT_IAC_LAP:
+ write_current_iac_lap_dump(level + 1, frm);
+ return;
+ case OCF_WRITE_SCAN_ENABLE:
+ case OCF_WRITE_AUTH_ENABLE:
+ case OCF_SET_CONTROLLER_TO_HOST_FC:
+ write_scan_enable_dump(level + 1, frm);
+ return;
+ case OCF_WRITE_CONN_ACCEPT_TIMEOUT:
+ case OCF_WRITE_PAGE_TIMEOUT:
+ write_page_timeout_dump(level + 1, frm);
+ return;
+ case OCF_WRITE_PAGE_ACTIVITY:
+ case OCF_WRITE_INQ_ACTIVITY:
+ write_page_activity_dump(level + 1, frm);
+ return;
+ case OCF_WRITE_INQUIRY_SCAN_TYPE:
+ write_inquiry_scan_type_dump(level + 1, frm);
+ return;
+ case OCF_WRITE_ENCRYPT_MODE:
+ case OCF_WRITE_INQUIRY_MODE:
+ case OCF_WRITE_AFH_MODE:
+ write_inquiry_mode_dump(level + 1, frm);
+ return;
+ case OCF_SET_AFH_CLASSIFICATION:
+ set_afh_classification_dump(level + 1, frm);
+ return;
+ case OCF_READ_TRANSMIT_POWER_LEVEL:
+ request_transmit_power_level_dump(level + 1, frm);
+ return;
+ case OCF_HOST_BUFFER_SIZE:
+ host_buffer_size_dump(level + 1, frm);
+ return;
+ case OCF_HOST_NUM_COMP_PKTS:
+ num_comp_pkts_dump(level + 1, frm);
+ return;
+ case OCF_FLUSH:
+ case OCF_READ_LINK_SUPERVISION_TIMEOUT:
+ case OCF_REFRESH_ENCRYPTION_KEY:
+ generic_command_dump(level + 1, frm);
+ return;
+ case OCF_WRITE_LINK_SUPERVISION_TIMEOUT:
+ write_link_supervision_timeout_dump(level + 1, frm);
+ return;
+ case OCF_WRITE_EXT_INQUIRY_RESPONSE:
+ write_ext_inquiry_response_dump(level + 1, frm);
+ return;
+ case OCF_WRITE_SIMPLE_PAIRING_MODE:
+ generic_write_mode_dump(level + 1, frm);
+ return;
+ case OCF_WRITE_INQUIRY_TRANSMIT_POWER_LEVEL:
+ write_inquiry_transmit_power_level_dump(level + 1, frm);
+ return;
+ case OCF_WRITE_DEFAULT_ERROR_DATA_REPORTING:
+ write_default_error_data_reporting_dump(level + 1, frm);
+ return;
+ case OCF_ENHANCED_FLUSH:
+ enhanced_flush_dump(level + 1, frm);
+ return;
+ case OCF_SEND_KEYPRESS_NOTIFY:
+ send_keypress_notify_dump(level + 1, frm);
+ return;
+ }
+ break;
+
+ case OGF_INFO_PARAM:
+ switch (ocf) {
+ case OCF_READ_LOCAL_EXT_FEATURES:
+ request_local_ext_features_dump(level + 1, frm);
+ return;
+ }
+ break;
+
+ case OGF_STATUS_PARAM:
+ switch (ocf) {
+ case OCF_READ_LINK_QUALITY:
+ case OCF_READ_RSSI:
+ case OCF_READ_AFH_MAP:
+ generic_command_dump(level + 1, frm);
+ return;
+ case OCF_READ_CLOCK:
+ request_clock_dump(level + 1, frm);
+ return;
+ }
+ break;
+
+ case OGF_TESTING_CMD:
+ switch (ocf) {
+ case OCF_WRITE_LOOPBACK_MODE:
+ case OCF_WRITE_SIMPLE_PAIRING_DEBUG_MODE:
+ generic_write_mode_dump(level + 1, frm);
+ return;
+ }
+ break;
+ }
+
+ raw_dump(level, frm);
+}
+
+static inline void status_response_dump(int level, struct frame *frm)
+{
+ uint8_t status = get_u8(frm);
+
+ p_indent(level, frm);
+ printf("status 0x%2.2x\n", status);
+
+ if (status > 0) {
+ p_indent(level, frm);
+ printf("Error: %s\n", status2str(status));
+ }
+
+ raw_dump(level, frm);
+}
+
+static inline void handle_response_dump(int level, struct frame *frm)
+{
+ uint16_t handle = btohs(htons(get_u16(frm)));
+
+ p_indent(level, frm);
+ printf("handle %d\n", handle);
+
+ raw_dump(level, frm);
+}
+
+static inline void bdaddr_response_dump(int level, struct frame *frm)
+{
+ uint8_t status = get_u8(frm);
+ bdaddr_t *bdaddr = frm->ptr;
+ char addr[18];
+
+ frm->ptr += sizeof(bdaddr_t);
+ frm->len -= sizeof(bdaddr_t);
+
+ p_indent(level, frm);
+ p_ba2str(bdaddr, addr);
+ printf("status 0x%2.2x bdaddr %s\n", status, addr);
+
+ if (status > 0) {
+ p_indent(level, frm);
+ printf("Error: %s\n", status2str(status));
+ }
+
+ raw_dump(level, frm);
+}
+
+static inline void generic_response_dump(int level, struct frame *frm)
+{
+ uint8_t status = get_u8(frm);
+ uint16_t handle = btohs(htons(get_u16(frm)));
+
+ p_indent(level, frm);
+ printf("status 0x%2.2x handle %d\n", status, handle);
+
+ if (status > 0) {
+ p_indent(level, frm);
+ printf("Error: %s\n", status2str(status));
+ }
+
+ raw_dump(level, frm);
+}
+
+static inline void status_mode_dump(int level, struct frame *frm)
+{
+ uint8_t status = get_u8(frm);
+ uint8_t mode = get_u8(frm);
+
+ p_indent(level, frm);
+ printf("status 0x%2.2x mode 0x%2.2x\n", status, mode);
+
+ if (status > 0) {
+ p_indent(level, frm);
+ printf("Error: %s\n", status2str(status));
+ }
+}
+
+static inline void read_pin_type_dump(int level, struct frame *frm)
+{
+ read_pin_type_rp *rp = frm->ptr;
+
+ p_indent(level, frm);
+ printf("status 0x%2.2x type %d\n", rp->status, rp->pin_type);
+
+ if (rp->status > 0) {
+ p_indent(level, frm);
+ printf("Error: %s\n", status2str(rp->status));
+ }
+}
+
+static inline void read_stored_link_key_dump(int level, struct frame *frm)
+{
+ read_stored_link_key_rp *rp = frm->ptr;
+
+ p_indent(level, frm);
+ printf("status 0x%2.2x max %d num %d\n",
+ rp->status, rp->max_keys, rp->num_keys);
+
+ if (rp->status > 0) {
+ p_indent(level, frm);
+ printf("Error: %s\n", status2str(rp->status));
+ }
+}
+
+static inline void write_stored_link_key_dump(int level, struct frame *frm)
+{
+ write_stored_link_key_rp *rp = frm->ptr;
+
+ p_indent(level, frm);
+ printf("status 0x%2.2x written %d\n", rp->status, rp->num_keys);
+
+ if (rp->status > 0) {
+ p_indent(level, frm);
+ printf("Error: %s\n", status2str(rp->status));
+ }
+}
+
+static inline void delete_stored_link_key_dump(int level, struct frame *frm)
+{
+ delete_stored_link_key_rp *rp = frm->ptr;
+
+ p_indent(level, frm);
+ printf("status 0x%2.2x deleted %d\n", rp->status, btohs(rp->num_keys));
+
+ if (rp->status > 0) {
+ p_indent(level, frm);
+ printf("Error: %s\n", status2str(rp->status));
+ }
+}
+
+static inline void read_local_name_dump(int level, struct frame *frm)
+{
+ read_local_name_rp *rp = frm->ptr;
+ char name[249];
+ int i;
+
+ memset(name, 0, sizeof(name));
+ for (i = 0; i < 248 && rp->name[i]; i++)
+ if (isprint(rp->name[i]))
+ name[i] = rp->name[i];
+ else
+ name[i] = '.';
+
+ p_indent(level, frm);
+ printf("status 0x%2.2x name \'%s\'\n", rp->status, name);
+
+ if (rp->status > 0) {
+ p_indent(level, frm);
+ printf("Error: %s\n", status2str(rp->status));
+ }
+}
+
+static inline void read_class_of_dev_dump(int level, struct frame *frm)
+{
+ read_class_of_dev_rp *rp = frm->ptr;
+
+ p_indent(level, frm);
+ printf("status 0x%2.2x class 0x%2.2x%2.2x%2.2x\n", rp->status,
+ rp->dev_class[2], rp->dev_class[1], rp->dev_class[0]);
+
+ if (rp->status > 0) {
+ p_indent(level, frm);
+ printf("Error: %s\n", status2str(rp->status));
+ }
+}
+
+static inline void read_voice_setting_dump(int level, struct frame *frm)
+{
+ read_voice_setting_rp *rp = frm->ptr;
+
+ p_indent(level, frm);
+ printf("status 0x%2.2x voice setting 0x%4.4x\n",
+ rp->status, btohs(rp->voice_setting));
+
+ if (rp->status > 0) {
+ p_indent(level, frm);
+ printf("Error: %s\n", status2str(rp->status));
+ }
+}
+
+static inline void read_current_iac_lap_dump(int level, struct frame *frm)
+{
+ read_current_iac_lap_rp *rp = frm->ptr;
+ int i;
+
+ for (i = 0; i < rp->num_current_iac; i++) {
+ p_indent(level, frm);
+ printf("IAC 0x%2.2x%2.2x%2.2x", rp->lap[i][2], rp->lap[i][1], rp->lap[i][0]);
+ if (rp->lap[i][2] == 0x9e && rp->lap[i][1] == 0x8b) {
+ switch (rp->lap[i][0]) {
+ case 0x00:
+ printf(" (Limited Inquiry Access Code)");
+ break;
+ case 0x33:
+ printf(" (General Inquiry Access Code)");
+ break;
+ }
+ }
+ printf("\n");
+ }
+}
+
+static inline void read_scan_enable_dump(int level, struct frame *frm)
+{
+ uint8_t status = get_u8(frm);
+ uint8_t enable = get_u8(frm);
+
+ p_indent(level, frm);
+ printf("status 0x%2.2x enable %d\n", status, enable);
+
+ if (status > 0) {
+ p_indent(level, frm);
+ printf("Error: %s\n", status2str(status));
+ }
+}
+
+static inline void read_page_timeout_dump(int level, struct frame *frm)
+{
+ read_page_timeout_rp *rp = frm->ptr;
+
+ p_indent(level, frm);
+ printf("status 0x%2.2x timeout %d\n", rp->status, btohs(rp->timeout));
+
+ if (rp->status > 0) {
+ p_indent(level, frm);
+ printf("Error: %s\n", status2str(rp->status));
+ }
+}
+
+static inline void read_page_activity_dump(int level, struct frame *frm)
+{
+ read_page_activity_rp *rp = frm->ptr;
+
+ p_indent(level, frm);
+ printf("status 0x%2.2x interval %d window %d\n",
+ rp->status, btohs(rp->interval), btohs(rp->window));
+
+ if (rp->status > 0) {
+ p_indent(level, frm);
+ printf("Error: %s\n", status2str(rp->status));
+ }
+}
+
+static inline void read_inquiry_scan_type_dump(int level, struct frame *frm)
+{
+ read_inquiry_scan_type_rp *rp = frm->ptr;
+
+ p_indent(level, frm);
+ printf("status 0x%2.2x type %d\n", rp->status, rp->type);
+
+ if (rp->status > 0) {
+ p_indent(level, frm);
+ printf("Error: %s\n", status2str(rp->status));
+ }
+}
+
+static inline void read_inquiry_mode_dump(int level, struct frame *frm)
+{
+ read_inquiry_mode_rp *rp = frm->ptr;
+
+ p_indent(level, frm);
+ printf("status 0x%2.2x mode %d\n", rp->status, rp->mode);
+
+ if (rp->status > 0) {
+ p_indent(level, frm);
+ printf("Error: %s\n", status2str(rp->status));
+ }
+}
+
+static inline void read_link_supervision_timeout_dump(int level, struct frame *frm)
+{
+ read_link_supervision_timeout_rp *rp = frm->ptr;
+
+ p_indent(level, frm);
+ printf("status 0x%2.2x handle %d timeout %d\n",
+ rp->status, btohs(rp->handle), btohs(rp->timeout));
+
+ if (rp->status > 0) {
+ p_indent(level, frm);
+ printf("Error: %s\n", status2str(rp->status));
+ }
+}
+
+static inline void read_transmit_power_level_dump(int level, struct frame *frm)
+{
+ read_transmit_power_level_rp *rp = frm->ptr;
+
+ p_indent(level, frm);
+ printf("status 0x%2.2x handle %d level %d\n",
+ rp->status, btohs(rp->handle), rp->level);
+
+ if (rp->status > 0) {
+ p_indent(level, frm);
+ printf("Error: %s\n", status2str(rp->status));
+ }
+}
+
+static inline void read_ext_inquiry_response_dump(int level, struct frame *frm)
+{
+ read_ext_inquiry_response_rp *rp = frm->ptr;
+
+ p_indent(level, frm);
+ printf("status 0x%2.2x fec 0x%2.2x\n", rp->status, rp->fec);
+
+ if (rp->status > 0) {
+ p_indent(level, frm);
+ printf("Error: %s\n", status2str(rp->status));
+ } else {
+ frm->ptr += 2;
+ frm->len -= 2;
+
+ ext_inquiry_response_dump(level, frm);
+ }
+}
+
+static inline void read_inquiry_transmit_power_level_dump(int level, struct frame *frm)
+{
+ read_inquiry_transmit_power_level_rp *rp = frm->ptr;
+
+ p_indent(level, frm);
+ printf("status 0x%2.2x level %d\n", rp->status, rp->level);
+
+ if (rp->status > 0) {
+ p_indent(level, frm);
+ printf("Error: %s\n", status2str(rp->status));
+ }
+}
+
+static inline void read_default_error_data_reporting_dump(int level, struct frame *frm)
+{
+ read_default_error_data_reporting_rp *rp = frm->ptr;
+
+ p_indent(level, frm);
+ printf("status 0x%2.2x reporting %d\n", rp->status, rp->reporting);
+
+ if (rp->status > 0) {
+ p_indent(level, frm);
+ printf("Error: %s\n", status2str(rp->status));
+ }
+}
+
+static inline void read_local_oob_data_dump(int level, struct frame *frm)
+{
+ read_local_oob_data_rp *rp = frm->ptr;
+ int i;
+
+ p_indent(level, frm);
+ printf("status 0x%2.2x\n", rp->status);
+
+ if (rp->status > 0) {
+ p_indent(level, frm);
+ printf("Error: %s\n", status2str(rp->status));
+ } else {
+ p_indent(level, frm);
+ printf("hash 0x");
+ for (i = 0; i < 16; i++)
+ printf("%02x", rp->hash[i]);
+ printf("\n");
+
+ p_indent(level, frm);
+ printf("randomizer 0x");
+ for (i = 0; i < 16; i++)
+ printf("%02x", rp->randomizer[i]);
+ printf("\n");
+ }
+}
+
+static inline void read_local_version_dump(int level, struct frame *frm)
+{
+ read_local_version_rp *rp = frm->ptr;
+ uint16_t manufacturer = btohs(rp->manufacturer);
+
+ p_indent(level, frm);
+ printf("status 0x%2.2x\n", rp->status);
+
+ if (rp->status > 0) {
+ p_indent(level, frm);
+ printf("Error: %s\n", status2str(rp->status));
+ } else {
+ p_indent(level, frm);
+ printf("HCI Version: %s (0x%x) HCI Revision: 0x%x\n",
+ hci_vertostr(rp->hci_ver),
+ rp->hci_ver, btohs(rp->hci_rev));
+ p_indent(level, frm);
+ printf("LMP Version: %s (0x%x) LMP Subversion: 0x%x\n",
+ lmp_vertostr(rp->lmp_ver),
+ rp->lmp_ver, btohs(rp->lmp_subver));
+ p_indent(level, frm);
+ printf("Manufacturer: %s (%d)\n",
+ bt_compidtostr(manufacturer), manufacturer);
+ }
+}
+
+static inline void read_local_commands_dump(int level, struct frame *frm)
+{
+ read_local_commands_rp *rp = frm->ptr;
+ int i, max = 0;
+
+ p_indent(level, frm);
+ printf("status 0x%2.2x\n", rp->status);
+
+ if (rp->status > 0) {
+ p_indent(level, frm);
+ printf("Error: %s\n", status2str(rp->status));
+ } else {
+ for (i = 0; i < 64; i++)
+ if (rp->commands[i])
+ max = i + 1;
+ p_indent(level, frm);
+ printf("Commands: ");
+ for (i = 0; i < (max > 32 ? 32 : max); i++)
+ printf("%2.2x", rp->commands[i]);
+ printf("\n");
+ if (max > 32) {
+ p_indent(level, frm);
+ printf(" ");
+ for (i = 32; i < max; i++)
+ printf("%2.2x", rp->commands[i]);
+ printf("\n");
+ }
+ }
+}
+
+static inline void read_local_features_dump(int level, struct frame *frm)
+{
+ read_local_features_rp *rp = frm->ptr;
+ int i;
+
+ p_indent(level, frm);
+ printf("status 0x%2.2x\n", rp->status);
+
+ if (rp->status > 0) {
+ p_indent(level, frm);
+ printf("Error: %s\n", status2str(rp->status));
+ } else {
+ p_indent(level, frm);
+ printf("Features:");
+ for (i = 0; i < 8; i++)
+ printf(" 0x%2.2x", rp->features[i]);
+ printf("\n");
+ }
+}
+
+static inline void read_local_ext_features_dump(int level, struct frame *frm)
+{
+ read_local_ext_features_rp *rp = frm->ptr;
+ int i;
+
+ p_indent(level, frm);
+ printf("status 0x%2.2x page %d max %d\n",
+ rp->status, rp->page_num, rp->max_page_num);
+
+ if (rp->status > 0) {
+ p_indent(level, frm);
+ printf("Error: %s\n", status2str(rp->status));
+ } else {
+ p_indent(level, frm);
+ printf("Features:");
+ for (i = 0; i < 8; i++)
+ printf(" 0x%2.2x", rp->features[i]);
+ printf("\n");
+ }
+}
+
+static inline void read_buffer_size_dump(int level, struct frame *frm)
+{
+ read_buffer_size_rp *rp = frm->ptr;
+
+ p_indent(level, frm);
+ printf("status 0x%2.2x\n", rp->status);
+
+ if (rp->status > 0) {
+ p_indent(level, frm);
+ printf("Error: %s\n", status2str(rp->status));
+ } else {
+ p_indent(level, frm);
+ printf("ACL MTU %d:%d SCO MTU %d:%d\n",
+ btohs(rp->acl_mtu), btohs(rp->acl_max_pkt),
+ rp->sco_mtu, btohs(rp->sco_max_pkt));
+ }
+}
+
+static inline void read_link_quality_dump(int level, struct frame *frm)
+{
+ read_link_quality_rp *rp = frm->ptr;
+
+ p_indent(level, frm);
+ printf("status 0x%2.2x handle %d lq %d\n",
+ rp->status, btohs(rp->handle), rp->link_quality);
+
+ if (rp->status > 0) {
+ p_indent(level, frm);
+ printf("Error: %s\n", status2str(rp->status));
+ }
+}
+
+static inline void read_rssi_dump(int level, struct frame *frm)
+{
+ read_rssi_rp *rp = frm->ptr;
+
+ p_indent(level, frm);
+ printf("status 0x%2.2x handle %d rssi %d\n",
+ rp->status, btohs(rp->handle), rp->rssi);
+
+ if (rp->status > 0) {
+ p_indent(level, frm);
+ printf("Error: %s\n", status2str(rp->status));
+ }
+}
+
+static inline void read_afh_map_dump(int level, struct frame *frm)
+{
+ read_afh_map_rp *rp = frm->ptr;
+ int i;
+
+ p_indent(level, frm);
+ printf("status 0x%2.2x handle %d mode %d\n",
+ rp->status, btohs(rp->handle), rp->mode);
+
+ if (rp->status > 0) {
+ p_indent(level, frm);
+ printf("Error: %s\n", status2str(rp->status));
+ } else {
+ p_indent(level, frm);
+ printf("AFH map: 0x");
+ for (i = 0; i < 10; i++)
+ printf("%2.2x", rp->map[i]);
+ printf("\n");
+ }
+}
+
+static inline void read_clock_dump(int level, struct frame *frm)
+{
+ read_clock_rp *rp = frm->ptr;
+
+ p_indent(level, frm);
+ printf("status 0x%2.2x handle %d clock 0x%4.4x accuracy %d\n",
+ rp->status, btohs(rp->handle),
+ btohl(rp->clock), btohs(rp->accuracy));
+
+ if (rp->status > 0) {
+ p_indent(level, frm);
+ printf("Error: %s\n", status2str(rp->status));
+ }
+}
+
+static inline void cmd_complete_dump(int level, struct frame *frm)
+{
+ evt_cmd_complete *evt = frm->ptr;
+ uint16_t opcode = btohs(evt->opcode);
+ uint16_t ogf = cmd_opcode_ogf(opcode);
+ uint16_t ocf = cmd_opcode_ocf(opcode);
+
+ if (ogf == OGF_VENDOR_CMD && (parser.flags & DUMP_NOVENDOR))
+ return;
+
+ p_indent(level, frm);
+ printf("%s (0x%2.2x|0x%4.4x) ncmd %d\n",
+ opcode2str(opcode), ogf, ocf, evt->ncmd);
+
+ frm->ptr += EVT_CMD_COMPLETE_SIZE;
+ frm->len -= EVT_CMD_COMPLETE_SIZE;
+
+ if (!(parser.flags & DUMP_VERBOSE)) {
+ raw_dump(level, frm);
+ return;
+ }
+
+ switch (ogf) {
+ case OGF_LINK_CTL:
+ switch (ocf) {
+ case OCF_INQUIRY_CANCEL:
+ case OCF_PERIODIC_INQUIRY:
+ case OCF_EXIT_PERIODIC_INQUIRY:
+ case OCF_READ_REMOTE_EXT_FEATURES:
+ status_response_dump(level, frm);
+ return;
+ case OCF_CREATE_CONN_CANCEL:
+ case OCF_REMOTE_NAME_REQ_CANCEL:
+ case OCF_PIN_CODE_REPLY:
+ case OCF_LINK_KEY_REPLY:
+ case OCF_PIN_CODE_NEG_REPLY:
+ case OCF_LINK_KEY_NEG_REPLY:
+ case OCF_USER_CONFIRM_REPLY:
+ case OCF_USER_CONFIRM_NEG_REPLY:
+ case OCF_USER_PASSKEY_REPLY:
+ case OCF_USER_PASSKEY_NEG_REPLY:
+ case OCF_REMOTE_OOB_DATA_REPLY:
+ case OCF_REMOTE_OOB_DATA_NEG_REPLY:
+ case OCF_IO_CAPABILITY_REPLY:
+ case OCF_IO_CAPABILITY_NEG_REPLY:
+ bdaddr_response_dump(level, frm);
+ return;
+ }
+ break;
+
+ case OGF_LINK_POLICY:
+ switch (ocf) {
+ case OCF_WRITE_LINK_POLICY:
+ case OCF_SNIFF_SUBRATING:
+ generic_response_dump(level, frm);
+ return;
+ }
+ break;
+
+ case OGF_HOST_CTL:
+ switch (ocf) {
+ case OCF_READ_PIN_TYPE:
+ read_pin_type_dump(level, frm);
+ return;
+ case OCF_READ_STORED_LINK_KEY:
+ read_stored_link_key_dump(level, frm);
+ return;
+ case OCF_WRITE_STORED_LINK_KEY:
+ write_stored_link_key_dump(level, frm);
+ return;
+ case OCF_DELETE_STORED_LINK_KEY:
+ delete_stored_link_key_dump(level, frm);
+ return;
+ case OCF_READ_LOCAL_NAME:
+ read_local_name_dump(level, frm);
+ return;
+ case OCF_READ_CLASS_OF_DEV:
+ read_class_of_dev_dump(level, frm);
+ return;
+ case OCF_READ_VOICE_SETTING:
+ read_voice_setting_dump(level, frm);
+ return;
+ case OCF_READ_CURRENT_IAC_LAP:
+ read_current_iac_lap_dump(level, frm);
+ return;
+ case OCF_READ_SCAN_ENABLE:
+ case OCF_READ_AUTH_ENABLE:
+ read_scan_enable_dump(level, frm);
+ return;
+ case OCF_READ_CONN_ACCEPT_TIMEOUT:
+ case OCF_READ_PAGE_TIMEOUT:
+ read_page_timeout_dump(level, frm);
+ return;
+ case OCF_READ_PAGE_ACTIVITY:
+ case OCF_READ_INQ_ACTIVITY:
+ read_page_activity_dump(level, frm);
+ return;
+ case OCF_READ_INQUIRY_SCAN_TYPE:
+ read_inquiry_scan_type_dump(level, frm);
+ return;
+ case OCF_READ_ENCRYPT_MODE:
+ case OCF_READ_INQUIRY_MODE:
+ case OCF_READ_AFH_MODE:
+ read_inquiry_mode_dump(level, frm);
+ return;
+ case OCF_READ_LINK_SUPERVISION_TIMEOUT:
+ read_link_supervision_timeout_dump(level, frm);
+ return;
+ case OCF_READ_TRANSMIT_POWER_LEVEL:
+ read_transmit_power_level_dump(level, frm);
+ return;
+ case OCF_READ_EXT_INQUIRY_RESPONSE:
+ read_ext_inquiry_response_dump(level, frm);
+ return;
+ case OCF_READ_INQUIRY_TRANSMIT_POWER_LEVEL:
+ read_inquiry_transmit_power_level_dump(level, frm);
+ return;
+ case OCF_READ_DEFAULT_ERROR_DATA_REPORTING:
+ read_default_error_data_reporting_dump(level, frm);
+ return;
+ case OCF_READ_LOCAL_OOB_DATA:
+ read_local_oob_data_dump(level, frm);
+ return;
+ case OCF_READ_SIMPLE_PAIRING_MODE:
+ status_mode_dump(level, frm);
+ return;
+ case OCF_FLUSH:
+ case OCF_WRITE_LINK_SUPERVISION_TIMEOUT:
+ generic_response_dump(level, frm);
+ return;
+ case OCF_RESET:
+ case OCF_SET_EVENT_MASK:
+ case OCF_SET_EVENT_FLT:
+ case OCF_WRITE_PIN_TYPE:
+ case OCF_CREATE_NEW_UNIT_KEY:
+ case OCF_CHANGE_LOCAL_NAME:
+ case OCF_WRITE_CLASS_OF_DEV:
+ case OCF_WRITE_VOICE_SETTING:
+ case OCF_WRITE_CURRENT_IAC_LAP:
+ case OCF_WRITE_SCAN_ENABLE:
+ case OCF_WRITE_AUTH_ENABLE:
+ case OCF_WRITE_ENCRYPT_MODE:
+ case OCF_WRITE_CONN_ACCEPT_TIMEOUT:
+ case OCF_WRITE_PAGE_TIMEOUT:
+ case OCF_WRITE_PAGE_ACTIVITY:
+ case OCF_WRITE_INQ_ACTIVITY:
+ case OCF_WRITE_INQUIRY_SCAN_TYPE:
+ case OCF_WRITE_INQUIRY_MODE:
+ case OCF_WRITE_AFH_MODE:
+ case OCF_SET_AFH_CLASSIFICATION:
+ case OCF_WRITE_EXT_INQUIRY_RESPONSE:
+ case OCF_WRITE_SIMPLE_PAIRING_MODE:
+ case OCF_WRITE_INQUIRY_TRANSMIT_POWER_LEVEL:
+ case OCF_WRITE_DEFAULT_ERROR_DATA_REPORTING:
+ case OCF_SET_CONTROLLER_TO_HOST_FC:
+ case OCF_HOST_BUFFER_SIZE:
+ case OCF_REFRESH_ENCRYPTION_KEY:
+ case OCF_SEND_KEYPRESS_NOTIFY:
+ status_response_dump(level, frm);
+ return;
+ }
+ break;
+
+ case OGF_INFO_PARAM:
+ switch (ocf) {
+ case OCF_READ_LOCAL_VERSION:
+ read_local_version_dump(level, frm);
+ return;
+ case OCF_READ_LOCAL_COMMANDS:
+ read_local_commands_dump(level, frm);
+ return;
+ case OCF_READ_LOCAL_FEATURES:
+ read_local_features_dump(level, frm);
+ return;
+ case OCF_READ_LOCAL_EXT_FEATURES:
+ read_local_ext_features_dump(level, frm);
+ return;
+ case OCF_READ_BUFFER_SIZE:
+ read_buffer_size_dump(level, frm);
+ return;
+ case OCF_READ_BD_ADDR:
+ bdaddr_response_dump(level, frm);
+ return;
+ }
+ break;
+
+ case OGF_STATUS_PARAM:
+ switch (ocf) {
+ case OCF_READ_FAILED_CONTACT_COUNTER:
+ case OCF_RESET_FAILED_CONTACT_COUNTER:
+ status_response_dump(level, frm);
+ return;
+ case OCF_READ_LINK_QUALITY:
+ read_link_quality_dump(level, frm);
+ return;
+ case OCF_READ_RSSI:
+ read_rssi_dump(level, frm);
+ return;
+ case OCF_READ_AFH_MAP:
+ read_afh_map_dump(level, frm);
+ return;
+ case OCF_READ_CLOCK:
+ read_clock_dump(level, frm);
+ return;
+ }
+ break;
+
+ case OGF_TESTING_CMD:
+ switch (ocf) {
+ case OCF_READ_LOOPBACK_MODE:
+ status_mode_dump(level, frm);
+ return;
+ case OCF_WRITE_LOOPBACK_MODE:
+ case OCF_ENABLE_DEVICE_UNDER_TEST_MODE:
+ case OCF_WRITE_SIMPLE_PAIRING_DEBUG_MODE:
+ status_response_dump(level, frm);
+ return;
+ }
+ break;
+ }
+
+ raw_dump(level, frm);
+}
+
+static inline void cmd_status_dump(int level, struct frame *frm)
+{
+ evt_cmd_status *evt = frm->ptr;
+ uint16_t opcode = btohs(evt->opcode);
+ uint16_t ogf = cmd_opcode_ogf(opcode);
+ uint16_t ocf = cmd_opcode_ocf(opcode);
+
+ if (ogf == OGF_VENDOR_CMD && (parser.flags & DUMP_NOVENDOR))
+ return;
+
+ p_indent(level, frm);
+ printf("%s (0x%2.2x|0x%4.4x) status 0x%2.2x ncmd %d\n",
+ opcode2str(opcode), ogf, ocf, evt->status, evt->ncmd);
+
+ if (evt->status > 0) {
+ p_indent(level, frm);
+ printf("Error: %s\n", status2str(evt->status));
+ }
+}
+
+static inline void hardware_error_dump(int level, struct frame *frm)
+{
+ evt_hardware_error *evt = frm->ptr;
+
+ p_indent(level, frm);
+ printf("code %d\n", evt->code);
+}
+
+static inline void inq_result_dump(int level, struct frame *frm)
+{
+ uint8_t num = get_u8(frm);
+ char addr[18];
+ int i;
+
+ for (i = 0; i < num; i++) {
+ inquiry_info *info = frm->ptr;
+
+ p_ba2str(&info->bdaddr, addr);
+
+ p_indent(level, frm);
+ printf("bdaddr %s mode %d clkoffset 0x%4.4x class 0x%2.2x%2.2x%2.2x\n",
+ addr, info->pscan_rep_mode, btohs(info->clock_offset),
+ info->dev_class[2], info->dev_class[1], info->dev_class[0]);
+
+ frm->ptr += INQUIRY_INFO_SIZE;
+ frm->len -= INQUIRY_INFO_SIZE;
+ }
+}
+
+static inline void conn_complete_dump(int level, struct frame *frm)
+{
+ evt_conn_complete *evt = frm->ptr;
+ char addr[18];
+
+ p_ba2str(&evt->bdaddr, addr);
+
+ p_indent(level, frm);
+ printf("status 0x%2.2x handle %d bdaddr %s type %s encrypt 0x%2.2x\n",
+ evt->status, btohs(evt->handle), addr,
+ linktype2str(evt->link_type), evt->encr_mode);
+
+ if (evt->status > 0) {
+ p_indent(level, frm);
+ printf("Error: %s\n", status2str(evt->status));
+ }
+}
+
+static inline void conn_request_dump(int level, struct frame *frm)
+{
+ evt_conn_request *evt = frm->ptr;
+ char addr[18];
+
+ p_ba2str(&evt->bdaddr, addr);
+
+ p_indent(level, frm);
+ printf("bdaddr %s class 0x%2.2x%2.2x%2.2x type %s\n",
+ addr, evt->dev_class[2], evt->dev_class[1],
+ evt->dev_class[0], linktype2str(evt->link_type));
+}
+
+static inline void disconn_complete_dump(int level, struct frame *frm)
+{
+ evt_disconn_complete *evt = frm->ptr;
+
+ p_indent(level, frm);
+ printf("status 0x%2.2x handle %d reason 0x%2.2x\n",
+ evt->status, btohs(evt->handle), evt->reason);
+
+ if (evt->status > 0) {
+ p_indent(level, frm);
+ printf("Error: %s\n", status2str(evt->status));
+ } else if (evt->reason > 0) {
+ p_indent(level, frm);
+ printf("Reason: %s\n", status2str(evt->reason));
+ }
+}
+
+static inline void remote_name_req_complete_dump(int level, struct frame *frm)
+{
+ evt_remote_name_req_complete *evt = frm->ptr;
+ char addr[18], name[249];
+ int i;
+
+ p_ba2str(&evt->bdaddr, addr);
+
+ memset(name, 0, sizeof(name));
+ for (i = 0; i < 248 && evt->name[i]; i++)
+ if (isprint(evt->name[i]))
+ name[i] = evt->name[i];
+ else
+ name[i] = '.';
+
+ p_indent(level, frm);
+ printf("status 0x%2.2x bdaddr %s name '%s'\n", evt->status, addr, name);
+
+ if (evt->status > 0) {
+ p_indent(level, frm);
+ printf("Error: %s\n", status2str(evt->status));
+ }
+}
+
+static inline void master_link_key_complete_dump(int level, struct frame *frm)
+{
+ evt_master_link_key_complete *evt = frm->ptr;
+
+ p_indent(level, frm);
+ printf("status 0x%2.2x handle %d flag %d\n",
+ evt->status, btohs(evt->handle), evt->key_flag);
+
+ if (evt->status > 0) {
+ p_indent(level, frm);
+ printf("Error: %s\n", status2str(evt->status));
+ }
+}
+
+static inline void encrypt_change_dump(int level, struct frame *frm)
+{
+ evt_encrypt_change *evt = frm->ptr;
+
+ p_indent(level, frm);
+ printf("status 0x%2.2x handle %d encrypt 0x%2.2x\n",
+ evt->status, btohs(evt->handle), evt->encrypt);
+
+ if (evt->status > 0) {
+ p_indent(level, frm);
+ printf("Error: %s\n", status2str(evt->status));
+ }
+}
+
+static inline void read_remote_features_complete_dump(int level, struct frame *frm)
+{
+ evt_read_remote_features_complete *evt = frm->ptr;
+ int i;
+
+ p_indent(level, frm);
+ printf("status 0x%2.2x handle %d\n", evt->status, btohs(evt->handle));
+
+ if (evt->status > 0) {
+ p_indent(level, frm);
+ printf("Error: %s\n", status2str(evt->status));
+ } else {
+ p_indent(level, frm);
+ printf("Features:");
+ for (i = 0; i < 8; i++)
+ printf(" 0x%2.2x", evt->features[i]);
+ printf("\n");
+ }
+}
+
+static inline void read_remote_version_complete_dump(int level, struct frame *frm)
+{
+ evt_read_remote_version_complete *evt = frm->ptr;
+ uint16_t manufacturer = btohs(evt->manufacturer);
+
+ p_indent(level, frm);
+ printf("status 0x%2.2x handle %d\n", evt->status, btohs(evt->handle));
+
+ if (evt->status > 0) {
+ p_indent(level, frm);
+ printf("Error: %s\n", status2str(evt->status));
+ } else {
+ p_indent(level, frm);
+ printf("LMP Version: %s (0x%x) LMP Subversion: 0x%x\n",
+ lmp_vertostr(evt->lmp_ver), evt->lmp_ver,
+ btohs(evt->lmp_subver));
+ p_indent(level, frm);
+ printf("Manufacturer: %s (%d)\n",
+ bt_compidtostr(manufacturer), manufacturer);
+ }
+}
+
+static inline void qos_setup_complete_dump(int level, struct frame *frm)
+{
+ evt_qos_setup_complete *evt = frm->ptr;
+
+ p_indent(level, frm);
+ printf("status 0x%2.2x handle %d flags %d\n",
+ evt->status, btohs(evt->handle), evt->flags);
+
+ if (evt->status > 0) {
+ p_indent(level, frm);
+ printf("Error: %s\n", status2str(evt->status));
+ } else {
+ p_indent(level, frm);
+ printf("Service type: %d\n", evt->qos.service_type);
+ p_indent(level, frm);
+ printf("Token rate: %d\n", btohl(evt->qos.token_rate));
+ p_indent(level, frm);
+ printf("Peak bandwith: %d\n", btohl(evt->qos.peak_bandwidth));
+ p_indent(level, frm);
+ printf("Latency: %d\n", btohl(evt->qos.latency));
+ p_indent(level, frm);
+ printf("Delay variation: %d\n", btohl(evt->qos.delay_variation));
+ }
+}
+
+static inline void role_change_dump(int level, struct frame *frm)
+{
+ evt_role_change *evt = frm->ptr;
+ char addr[18];
+
+ p_indent(level, frm);
+ p_ba2str(&evt->bdaddr, addr);
+ printf("status 0x%2.2x bdaddr %s role 0x%2.2x\n",
+ evt->status, addr, evt->role);
+
+ if (evt->status > 0) {
+ p_indent(level, frm);
+ printf("Error: %s\n", status2str(evt->status));
+ } else {
+ p_indent(level, frm);
+ printf("Role: %s\n", role2str(evt->role));
+ }
+}
+
+static inline void mode_change_dump(int level, struct frame *frm)
+{
+ evt_mode_change *evt = frm->ptr;
+
+ p_indent(level, frm);
+ printf("status 0x%2.2x handle %d mode 0x%2.2x interval %d\n",
+ evt->status, btohs(evt->handle), evt->mode, btohs(evt->interval));
+
+ if (evt->status > 0) {
+ p_indent(level, frm);
+ printf("Error: %s\n", status2str(evt->status));
+ } else {
+ p_indent(level, frm);
+ printf("Mode: %s\n", mode2str(evt->mode));
+ }
+}
+
+static inline void pin_code_req_dump(int level, struct frame *frm)
+{
+ evt_pin_code_req *evt = frm->ptr;
+ char addr[18];
+
+ p_indent(level, frm);
+ p_ba2str(&evt->bdaddr, addr);
+ printf("bdaddr %s\n", addr);
+}
+
+static inline void link_key_notify_dump(int level, struct frame *frm)
+{
+ evt_link_key_notify *evt = frm->ptr;
+ char addr[18];
+ int i;
+
+ p_indent(level, frm);
+ p_ba2str(&evt->bdaddr, addr);
+ printf("bdaddr %s key ", addr);
+ for (i = 0; i < 16; i++)
+ if (parser.flags & DUMP_NOVENDOR)
+ printf("**");
+ else
+ printf("%2.2X", evt->link_key[i]);
+ printf(" type %d\n", evt->key_type);
+
+ p_indent(level, frm);
+ printf("Type: %s\n", keytype2str(evt->key_type));
+}
+
+static inline void max_slots_change_dump(int level, struct frame *frm)
+{
+ evt_max_slots_change *evt = frm->ptr;
+
+ p_indent(level, frm);
+ printf("handle %d slots %d\n", btohs(evt->handle), evt->max_slots);
+}
+
+static inline void data_buffer_overflow_dump(int level, struct frame *frm)
+{
+ evt_data_buffer_overflow *evt = frm->ptr;
+
+ p_indent(level, frm);
+ printf("type %s\n", linktype2str(evt->link_type));
+}
+
+static inline void read_clock_offset_complete_dump(int level, struct frame *frm)
+{
+ evt_read_clock_offset_complete *evt = frm->ptr;
+
+ p_indent(level, frm);
+ printf("status 0x%2.2x handle %d clkoffset 0x%4.4x\n",
+ evt->status, btohs(evt->handle), btohs(evt->clock_offset));
+
+ if (evt->status > 0) {
+ p_indent(level, frm);
+ printf("Error: %s\n", status2str(evt->status));
+ }
+}
+
+static inline void conn_ptype_changed_dump(int level, struct frame *frm)
+{
+ evt_conn_ptype_changed *evt = frm->ptr;
+ uint16_t ptype = btohs(evt->ptype);
+ char *str;
+
+ p_indent(level, frm);
+ printf("status 0x%2.2x handle %d ptype 0x%4.4x\n",
+ evt->status, btohs(evt->handle), ptype);
+
+ if (evt->status > 0) {
+ p_indent(level, frm);
+ printf("Error: %s\n", status2str(evt->status));
+ } else {
+ str = hci_ptypetostr(ptype);
+ if (str) {
+ p_indent(level, frm);
+ printf("Packet type: %s\n", str);
+ free(str);
+ }
+ }
+}
+
+static inline void pscan_rep_mode_change_dump(int level, struct frame *frm)
+{
+ evt_pscan_rep_mode_change *evt = frm->ptr;
+ char addr[18];
+
+ p_indent(level, frm);
+ p_ba2str(&evt->bdaddr, addr);
+ printf("bdaddr %s mode %d\n", addr, evt->pscan_rep_mode);
+}
+
+static inline void flow_spec_complete_dump(int level, struct frame *frm)
+{
+ evt_flow_spec_complete *evt = frm->ptr;
+
+ p_indent(level, frm);
+ printf("status 0x%2.2x handle %d flags %d %s\n",
+ evt->status, btohs(evt->handle), evt->flags,
+ evt->direction == 0 ? "outgoing" : "incoming");
+
+ if (evt->status > 0) {
+ p_indent(level, frm);
+ printf("Error: %s\n", status2str(evt->status));
+ } else {
+ p_indent(level, frm);
+ printf("Service type: %d\n", evt->qos.service_type);
+ p_indent(level, frm);
+ printf("Token rate: %d\n", btohl(evt->qos.token_rate));
+ p_indent(level, frm);
+ printf("Peak bandwith: %d\n", btohl(evt->qos.peak_bandwidth));
+ p_indent(level, frm);
+ printf("Latency: %d\n", btohl(evt->qos.latency));
+ p_indent(level, frm);
+ printf("Delay variation: %d\n", btohl(evt->qos.delay_variation));
+ }
+}
+
+static inline void inq_result_with_rssi_dump(int level, struct frame *frm)
+{
+ uint8_t num = get_u8(frm);
+ char addr[18];
+ int i;
+
+ if (!num)
+ return;
+
+ if (frm->len / num == INQUIRY_INFO_WITH_RSSI_AND_PSCAN_MODE_SIZE) {
+ for (i = 0; i < num; i++) {
+ inquiry_info_with_rssi_and_pscan_mode *info = frm->ptr;
+
+ p_indent(level, frm);
+
+ p_ba2str(&info->bdaddr, addr);
+ printf("bdaddr %s mode %d clkoffset 0x%4.4x class 0x%2.2x%2.2x%2.2x rssi %d\n",
+ addr, info->pscan_rep_mode, btohs(info->clock_offset),
+ info->dev_class[2], info->dev_class[1], info->dev_class[0], info->rssi);
+
+ frm->ptr += INQUIRY_INFO_WITH_RSSI_AND_PSCAN_MODE_SIZE;
+ frm->len -= INQUIRY_INFO_WITH_RSSI_AND_PSCAN_MODE_SIZE;
+ }
+ } else {
+ for (i = 0; i < num; i++) {
+ inquiry_info_with_rssi *info = frm->ptr;
+
+ p_indent(level, frm);
+
+ p_ba2str(&info->bdaddr, addr);
+ printf("bdaddr %s mode %d clkoffset 0x%4.4x class 0x%2.2x%2.2x%2.2x rssi %d\n",
+ addr, info->pscan_rep_mode, btohs(info->clock_offset),
+ info->dev_class[2], info->dev_class[1], info->dev_class[0], info->rssi);
+
+ frm->ptr += INQUIRY_INFO_WITH_RSSI_SIZE;
+ frm->len -= INQUIRY_INFO_WITH_RSSI_SIZE;
+ }
+ }
+}
+
+static inline void read_remote_ext_features_complete_dump(int level, struct frame *frm)
+{
+ evt_read_remote_ext_features_complete *evt = frm->ptr;
+ int i;
+
+ p_indent(level, frm);
+ printf("status 0x%2.2x handle %d page %d max %d\n",
+ evt->status, btohs(evt->handle),
+ evt->page_num, evt->max_page_num);
+
+ if (evt->status > 0) {
+ p_indent(level, frm);
+ printf("Error: %s\n", status2str(evt->status));
+ } else {
+ p_indent(level, frm);
+ printf("Features:");
+ for (i = 0; i < 8; i++)
+ printf(" 0x%2.2x", evt->features[i]);
+ printf("\n");
+ }
+}
+
+static inline void sync_conn_complete_dump(int level, struct frame *frm)
+{
+ evt_sync_conn_complete *evt = frm->ptr;
+ char addr[18];
+
+ p_ba2str(&evt->bdaddr, addr);
+
+ p_indent(level, frm);
+ printf("status 0x%2.2x handle %d bdaddr %s type %s\n",
+ evt->status, btohs(evt->handle), addr,
+ evt->link_type == 0 ? "SCO" : "eSCO");
+
+ if (evt->status > 0) {
+ p_indent(level, frm);
+ printf("Error: %s\n", status2str(evt->status));
+ } else {
+ p_indent(level, frm);
+ printf("Air mode: %s\n", airmode2str(evt->air_mode));
+ }
+}
+
+static inline void sync_conn_changed_dump(int level, struct frame *frm)
+{
+ evt_sync_conn_changed *evt = frm->ptr;
+
+ p_indent(level, frm);
+ printf("status 0x%2.2x handle %d\n", evt->status, btohs(evt->handle));
+
+ if (evt->status > 0) {
+ p_indent(level, frm);
+ printf("Error: %s\n", status2str(evt->status));
+ }
+}
+
+static inline void sniff_subrating_event_dump(int level, struct frame *frm)
+{
+ evt_sniff_subrating *evt = frm->ptr;
+
+ p_indent(level, frm);
+ printf("status 0x%2.2x handle %d\n", evt->status, btohs(evt->handle));
+
+ if (evt->status > 0) {
+ p_indent(level, frm);
+ printf("Error: %s\n", status2str(evt->status));
+ } else {
+ p_indent(level, frm);
+ printf("max latency transmit %d receive %d\n",
+ btohs(evt->max_tx_latency),
+ btohs(evt->max_rx_latency));
+
+ p_indent(level, frm);
+ printf("min timeout remote %d local %d\n",
+ btohs(evt->min_remote_timeout),
+ btohs(evt->min_local_timeout));
+ }
+}
+
+static inline void extended_inq_result_dump(int level, struct frame *frm)
+{
+ uint8_t num = get_u8(frm);
+ char addr[18];
+ int i;
+
+ for (i = 0; i < num; i++) {
+ extended_inquiry_info *info = frm->ptr;
+
+ p_ba2str(&info->bdaddr, addr);
+
+ p_indent(level, frm);
+ printf("bdaddr %s mode %d clkoffset 0x%4.4x class 0x%2.2x%2.2x%2.2x rssi %d\n",
+ addr, info->pscan_rep_mode, btohs(info->clock_offset),
+ info->dev_class[2], info->dev_class[1], info->dev_class[0], info->rssi);
+
+ frm->ptr += INQUIRY_INFO_WITH_RSSI_SIZE;
+ frm->len -= INQUIRY_INFO_WITH_RSSI_SIZE;
+
+ ext_inquiry_response_dump(level, frm);
+ }
+}
+
+static inline void link_supervision_timeout_changed_dump(int level, struct frame *frm)
+{
+ evt_link_supervision_timeout_changed *evt = frm->ptr;
+
+ p_indent(level, frm);
+ printf("handle %d timeout %d\n",
+ btohs(evt->handle), btohs(evt->timeout));
+}
+
+static inline void user_passkey_notify_dump(int level, struct frame *frm)
+{
+ evt_user_passkey_notify *evt = frm->ptr;
+ char addr[18];
+
+ p_indent(level, frm);
+ p_ba2str(&evt->bdaddr, addr);
+ printf("bdaddr %s passkey %d\n", addr, btohl(evt->passkey));
+}
+
+static inline void keypress_notify_dump(int level, struct frame *frm)
+{
+ evt_keypress_notify *evt = frm->ptr;
+ char addr[18];
+
+ p_indent(level, frm);
+ p_ba2str(&evt->bdaddr, addr);
+ printf("bdaddr %s type %d\n", addr, evt->type);
+}
+
+static inline void remote_host_features_notify_dump(int level, struct frame *frm)
+{
+ evt_remote_host_features_notify *evt = frm->ptr;
+ char addr[18];
+ int i;
+
+ p_indent(level, frm);
+ p_ba2str(&evt->bdaddr, addr);
+ printf("bdaddr %s\n", addr);
+
+ p_indent(level, frm);
+ printf("Features:");
+ for (i = 0; i < 8; i++)
+ printf(" 0x%2.2x", evt->features[i]);
+ printf("\n");
+}
+
+static inline void event_dump(int level, struct frame *frm)
+{
+ hci_event_hdr *hdr = frm->ptr;
+ uint8_t event = hdr->evt;
+
+ if (p_filter(FILT_HCI))
+ return;
+
+ if (event <= EVENT_NUM) {
+ p_indent(level, frm);
+ printf("HCI Event: %s (0x%2.2x) plen %d\n",
+ event_str[hdr->evt], hdr->evt, hdr->plen);
+ } else if (hdr->evt == EVT_TESTING) {
+ p_indent(level, frm);
+ printf("HCI Event: Testing (0x%2.2x) plen %d\n", hdr->evt, hdr->plen);
+ } else if (hdr->evt == EVT_VENDOR) {
+ uint16_t manufacturer;
+
+ if (parser.flags & DUMP_NOVENDOR)
+ return;
+
+ p_indent(level, frm);
+ printf("HCI Event: Vendor (0x%2.2x) plen %d\n", hdr->evt, hdr->plen);
+
+ manufacturer = get_manufacturer();
+
+ switch (manufacturer) {
+ case 0:
+ case 37:
+ case 48:
+ frm->ptr += HCI_EVENT_HDR_SIZE;
+ frm->len -= HCI_EVENT_HDR_SIZE;
+ ericsson_dump(level + 1, frm);
+ return;
+ case 10:
+ frm->ptr += HCI_EVENT_HDR_SIZE;
+ frm->len -= HCI_EVENT_HDR_SIZE;
+ csr_dump(level + 1, frm);
+ return;
+ }
+ } else {
+ p_indent(level, frm);
+ printf("HCI Event: code 0x%2.2x plen %d\n", hdr->evt, hdr->plen);
+ }
+
+ frm->ptr += HCI_EVENT_HDR_SIZE;
+ frm->len -= HCI_EVENT_HDR_SIZE;
+
+ if (event == EVT_CMD_COMPLETE) {
+ evt_cmd_complete *cc = frm->ptr;
+ if (cc->opcode == cmd_opcode_pack(OGF_INFO_PARAM, OCF_READ_LOCAL_VERSION)) {
+ read_local_version_rp *rp = frm->ptr + EVT_CMD_COMPLETE_SIZE;
+ manufacturer = rp->manufacturer;
+ }
+ }
+
+ if (event == EVT_DISCONN_COMPLETE) {
+ evt_disconn_complete *evt = frm->ptr;
+ l2cap_clear(btohs(evt->handle));
+ }
+
+ if (!(parser.flags & DUMP_VERBOSE)) {
+ raw_dump(level, frm);
+ return;
+ }
+
+ switch (event) {
+ case EVT_LOOPBACK_COMMAND:
+ command_dump(level + 1, frm);
+ break;
+ case EVT_CMD_COMPLETE:
+ cmd_complete_dump(level + 1, frm);
+ break;
+ case EVT_CMD_STATUS:
+ cmd_status_dump(level + 1, frm);
+ break;
+ case EVT_HARDWARE_ERROR:
+ hardware_error_dump(level + 1, frm);
+ break;
+ case EVT_FLUSH_OCCURRED:
+ case EVT_QOS_VIOLATION:
+ handle_response_dump(level + 1, frm);
+ break;
+ case EVT_INQUIRY_COMPLETE:
+ status_response_dump(level + 1, frm);
+ break;
+ case EVT_INQUIRY_RESULT:
+ inq_result_dump(level + 1, frm);
+ break;
+ case EVT_CONN_COMPLETE:
+ conn_complete_dump(level + 1, frm);
+ break;
+ case EVT_CONN_REQUEST:
+ conn_request_dump(level + 1, frm);
+ break;
+ case EVT_DISCONN_COMPLETE:
+ disconn_complete_dump(level + 1, frm);
+ break;
+ case EVT_AUTH_COMPLETE:
+ case EVT_CHANGE_CONN_LINK_KEY_COMPLETE:
+ generic_response_dump(level + 1, frm);
+ break;
+ case EVT_MASTER_LINK_KEY_COMPLETE:
+ master_link_key_complete_dump(level + 1, frm);
+ break;
+ case EVT_REMOTE_NAME_REQ_COMPLETE:
+ remote_name_req_complete_dump(level + 1, frm);
+ break;
+ case EVT_ENCRYPT_CHANGE:
+ encrypt_change_dump(level + 1, frm);
+ break;
+ case EVT_READ_REMOTE_FEATURES_COMPLETE:
+ read_remote_features_complete_dump(level + 1, frm);
+ break;
+ case EVT_READ_REMOTE_VERSION_COMPLETE:
+ read_remote_version_complete_dump(level + 1, frm);
+ break;
+ case EVT_QOS_SETUP_COMPLETE:
+ qos_setup_complete_dump(level + 1, frm);
+ break;
+ case EVT_ROLE_CHANGE:
+ role_change_dump(level + 1, frm);
+ break;
+ case EVT_NUM_COMP_PKTS:
+ num_comp_pkts_dump(level + 1, frm);
+ break;
+ case EVT_MODE_CHANGE:
+ mode_change_dump(level + 1, frm);
+ break;
+ case EVT_RETURN_LINK_KEYS:
+ return_link_keys_dump(level + 1, frm);
+ break;
+ case EVT_PIN_CODE_REQ:
+ case EVT_LINK_KEY_REQ:
+ case EVT_IO_CAPABILITY_REQUEST:
+ case EVT_USER_PASSKEY_REQUEST:
+ case EVT_REMOTE_OOB_DATA_REQUEST:
+ pin_code_req_dump(level + 1, frm);
+ break;
+ case EVT_LINK_KEY_NOTIFY:
+ link_key_notify_dump(level + 1, frm);
+ break;
+ case EVT_DATA_BUFFER_OVERFLOW:
+ data_buffer_overflow_dump(level + 1, frm);
+ break;
+ case EVT_MAX_SLOTS_CHANGE:
+ max_slots_change_dump(level + 1, frm);
+ break;
+ case EVT_READ_CLOCK_OFFSET_COMPLETE:
+ read_clock_offset_complete_dump(level + 1, frm);
+ break;
+ case EVT_CONN_PTYPE_CHANGED:
+ conn_ptype_changed_dump(level + 1, frm);
+ break;
+ case EVT_PSCAN_REP_MODE_CHANGE:
+ pscan_rep_mode_change_dump(level + 1, frm);
+ break;
+ case EVT_FLOW_SPEC_COMPLETE:
+ flow_spec_complete_dump(level + 1, frm);
+ break;
+ case EVT_INQUIRY_RESULT_WITH_RSSI:
+ inq_result_with_rssi_dump(level + 1, frm);
+ break;
+ case EVT_READ_REMOTE_EXT_FEATURES_COMPLETE:
+ read_remote_ext_features_complete_dump(level + 1, frm);
+ break;
+ case EVT_SYNC_CONN_COMPLETE:
+ sync_conn_complete_dump(level + 1, frm);
+ break;
+ case EVT_SYNC_CONN_CHANGED:
+ sync_conn_changed_dump(level + 1, frm);
+ break;
+ case EVT_SNIFF_SUBRATING:
+ sniff_subrating_event_dump(level + 1, frm);
+ break;
+ case EVT_EXTENDED_INQUIRY_RESULT:
+ extended_inq_result_dump(level + 1, frm);
+ break;
+ case EVT_ENCRYPTION_KEY_REFRESH_COMPLETE:
+ generic_response_dump(level + 1, frm);
+ break;
+ case EVT_SIMPLE_PAIRING_COMPLETE:
+ bdaddr_response_dump(level + 1, frm);
+ break;
+ case EVT_LINK_SUPERVISION_TIMEOUT_CHANGED:
+ link_supervision_timeout_changed_dump(level + 1, frm);
+ break;
+ case EVT_ENHANCED_FLUSH_COMPLETE:
+ generic_command_dump(level + 1, frm);
+ break;
+ case EVT_IO_CAPABILITY_RESPONSE:
+ io_capability_reply_dump(level + 1, frm);
+ break;
+ case EVT_USER_CONFIRM_REQUEST:
+ case EVT_USER_PASSKEY_NOTIFY:
+ user_passkey_notify_dump(level + 1, frm);
+ break;
+ case EVT_KEYPRESS_NOTIFY:
+ keypress_notify_dump(level + 1, frm);
+ break;
+ case EVT_REMOTE_HOST_FEATURES_NOTIFY:
+ remote_host_features_notify_dump(level + 1, frm);
+ break;
+ default:
+ raw_dump(level, frm);
+ break;
+ }
+}
+
+static inline void acl_dump(int level, struct frame *frm)
+{
+ hci_acl_hdr *hdr = (void *) frm->ptr;
+ uint16_t handle = btohs(hdr->handle);
+ uint16_t dlen = btohs(hdr->dlen);
+ uint8_t flags = acl_flags(handle);
+
+ if (!p_filter(FILT_HCI)) {
+ p_indent(level, frm);
+ printf("ACL data: handle %d flags 0x%2.2x dlen %d\n",
+ acl_handle(handle), flags, dlen);
+ level++;
+ }
+
+ frm->ptr += HCI_ACL_HDR_SIZE;
+ frm->len -= HCI_ACL_HDR_SIZE;
+ frm->flags = flags;
+ frm->handle = acl_handle(handle);
+
+ if (parser.filter & ~FILT_HCI)
+ l2cap_dump(level, frm);
+ else
+ raw_dump(level, frm);
+}
+
+static inline void sco_dump(int level, struct frame *frm)
+{
+ hci_sco_hdr *hdr = (void *) frm->ptr;
+ uint16_t handle = btohs(hdr->handle);
+ uint8_t flags = acl_flags(handle);
+ int len;
+
+ if (frm->audio_fd > fileno(stderr))
+ len = write(frm->audio_fd, frm->ptr + HCI_SCO_HDR_SIZE, hdr->dlen);
+
+ if (!p_filter(FILT_SCO)) {
+ p_indent(level, frm);
+ printf("SCO data: handle %d flags 0x%2.2x dlen %d\n",
+ acl_handle(handle), flags, hdr->dlen);
+ level++;
+
+ frm->ptr += HCI_SCO_HDR_SIZE;
+ frm->len -= HCI_SCO_HDR_SIZE;
+ raw_dump(level, frm);
+ }
+}
+
+static inline void vendor_dump(int level, struct frame *frm)
+{
+ if (p_filter(FILT_HCI))
+ return;
+
+ if (frm->dev_id == HCI_DEV_NONE) {
+ uint16_t device = btohs(htons(get_u16(frm)));
+ uint16_t proto = btohs(htons(get_u16(frm)));
+ uint16_t type = btohs(htons(get_u16(frm)));
+ uint16_t plen = btohs(htons(get_u16(frm)));
+
+ p_indent(level, frm);
+
+ printf("System %s: device hci%d proto 0x%2.2x type 0x%2.2x plen %d\n",
+ frm->in ? "event" : "command", device, proto, type, plen);
+
+ raw_dump(level, frm);
+ return;
+ }
+
+ if (parser.flags & DUMP_NOVENDOR)
+ return;
+
+ if (get_manufacturer() == 12) {
+ bpa_dump(level, frm);
+ return;
+ }
+
+ p_indent(level, frm);
+ printf("Vendor data: len %d\n", frm->len);
+ raw_dump(level, frm);
+}
+
+void hci_dump(int level, struct frame *frm)
+{
+ uint8_t type = *(uint8_t *)frm->ptr;
+
+ frm->ptr++; frm->len--;
+
+ switch (type) {
+ case HCI_COMMAND_PKT:
+ command_dump(level, frm);
+ break;
+
+ case HCI_EVENT_PKT:
+ event_dump(level, frm);
+ break;
+
+ case HCI_ACLDATA_PKT:
+ acl_dump(level, frm);
+ break;
+
+ case HCI_SCODATA_PKT:
+ sco_dump(level, frm);
+ break;
+
+ case HCI_VENDOR_PKT:
+ vendor_dump(level, frm);
+ break;
+
+ default:
+ if (p_filter(FILT_HCI))
+ break;
+
+ p_indent(level, frm);
+ printf("Unknown: type 0x%2.2x len %d\n", type, frm->len);
+ raw_dump(level, frm);
+ break;
+ }
+}
--- /dev/null
+/*
+ *
+ * BlueZ - Bluetooth protocol stack for Linux
+ *
+ * Copyright (C) 2004-2007 Marcel Holtmann <marcel@holtmann.org>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include <stdio.h>
+#include <errno.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include <sys/types.h>
+#include <netinet/in.h>
+
+#include "parser.h"
+
+static char *pid2str(uint16_t pid)
+{
+ switch (pid) {
+ case 0x0001:
+ return "CreditGrant";
+ case 0x0002:
+ return "CreditRequest";
+ case 0x0003:
+ return "CreditReturn";
+ case 0x0004:
+ return "CreditQuery";
+ case 0x0005:
+ return "GetLPTStatus";
+ case 0x0006:
+ return "Get1284ID";
+ case 0x0007:
+ return "SoftReset";
+ case 0x0008:
+ return "HardRest";
+ case 0x0009:
+ return "RegisterNotification";
+ case 0x000A:
+ return "NotificationConnectionAlive";
+ default:
+ return "Reserved";
+ }
+}
+
+static char *status2str(uint16_t status)
+{
+ switch (status) {
+ case 0x0000:
+ return "Feature unsupported";
+ case 0x0001:
+ return "Success";
+ case 0x0002:
+ return "Credit synchronization error";
+ case 0xFFFF:
+ return "Generic error";
+ default:
+ return "Unknown";
+ }
+}
+
+void hcrp_dump(int level, struct frame *frm)
+{
+ uint16_t pid, tid, plen, status;
+ uint32_t credits;
+
+ pid = get_u16(frm);
+ tid = get_u16(frm);
+ plen = get_u16(frm);
+
+ p_indent(level, frm);
+
+ printf("HCRP %s %s: tid 0x%x plen %d",
+ pid2str(pid), frm->in ? "rsp" : "cmd", tid, plen);
+
+ if (frm->in) {
+ status = get_u16(frm);
+ printf(" status %d (%s)\n", status, status2str(status));
+ } else
+ printf("\n");
+
+ if (pid == 0x0001 && !frm->in) {
+ credits = get_u32(frm);
+ p_indent(level + 1, frm);
+ printf("credits %d\n", credits);
+ }
+
+ if (pid == 0x0002 && frm->in) {
+ credits = get_u32(frm);
+ p_indent(level + 1, frm);
+ printf("credits %d\n", credits);
+ }
+
+ raw_dump(level + 1, frm);
+}
--- /dev/null
+/*
+ *
+ * BlueZ - Bluetooth protocol stack for Linux
+ *
+ * Copyright (C) 2003-2007 Marcel Holtmann <marcel@holtmann.org>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include <stdio.h>
+#include <errno.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include <sys/types.h>
+#include <netinet/in.h>
+
+#include "parser.h"
+
+static char *type2str(uint8_t head)
+{
+ switch (head & 0xf0) {
+ case 0x00:
+ return "Handshake";
+ case 0x10:
+ return "Control";
+ case 0x40:
+ return "Get report";
+ case 0x50:
+ return "Set report";
+ case 0x60:
+ return "Get protocol";
+ case 0x70:
+ return "Set protocol";
+ case 0x80:
+ return "Get idle";
+ case 0x90:
+ return "Set idle";
+ case 0xa0:
+ return "Data";
+ case 0xb0:
+ return "Data continuation";
+ default:
+ return "Reserved";
+ }
+}
+
+static char *result2str(uint8_t head)
+{
+ switch (head & 0x0f) {
+ case 0x00:
+ return "Successful";
+ case 0x01:
+ return "Not ready";
+ case 0x02:
+ return "Invalid report ID";
+ case 0x03:
+ return "Unsupported request";
+ case 0x04:
+ return "Invalid parameter";
+ case 0x0e:
+ return "Unknown";
+ case 0x0f:
+ return "Fatal";
+ default:
+ return "Reserved";
+ }
+}
+
+static char *operation2str(uint8_t head)
+{
+ switch (head & 0x0f) {
+ case 0x00:
+ return "No operation";
+ case 0x01:
+ return "Hard reset";
+ case 0x02:
+ return "Soft reset";
+ case 0x03:
+ return "Suspend";
+ case 0x04:
+ return "Exit suspend";
+ case 0x05:
+ return "Virtual cable unplug";
+ default:
+ return "Reserved";
+ }
+}
+
+static char *report2str(uint8_t head)
+{
+ switch (head & 0x03) {
+ case 0x00:
+ return "Other report";
+ case 0x01:
+ return "Input report";
+ case 0x02:
+ return "Output report";
+ case 0x03:
+ return "Feature report";
+ default:
+ return "Reserved";
+ }
+}
+
+static char *protocol2str(uint8_t head)
+{
+ switch (head & 0x01) {
+ case 0x00:
+ return "Boot protocol";
+ case 0x01:
+ return "Report protocol";
+ default:
+ return "Reserved";
+ }
+}
+
+void hidp_dump(int level, struct frame *frm)
+{
+ uint8_t hdr;
+ char *param;
+
+ hdr = get_u8(frm);
+
+ switch (hdr & 0xf0) {
+ case 0x00:
+ param = result2str(hdr);
+ break;
+ case 0x10:
+ param = operation2str(hdr);
+ break;
+ case 0x60:
+ case 0x70:
+ param = protocol2str(hdr);
+ break;
+ case 0x40:
+ case 0x50:
+ case 0xa0:
+ case 0xb0:
+ param = report2str(hdr);
+ break;
+ default:
+ param = "";
+ break;
+ }
+
+ p_indent(level, frm);
+
+ printf("HIDP: %s: %s\n", type2str(hdr), param);
+
+ raw_dump(level, frm);
+}
--- /dev/null
+/*
+ *
+ * BlueZ - Bluetooth protocol stack for Linux
+ *
+ * Copyright (C) 2000-2002 Maxim Krasnyansky <maxk@qualcomm.com>
+ * Copyright (C) 2003-2007 Marcel Holtmann <marcel@holtmann.org>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include <stdio.h>
+#include <errno.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <netinet/in.h>
+
+#include <bluetooth/bluetooth.h>
+#include <bluetooth/hci.h>
+#include <bluetooth/l2cap.h>
+
+#include "parser.h"
+#include "sdp.h"
+
+typedef struct {
+ uint16_t handle;
+ struct frame frm;
+} handle_info;
+#define HANDLE_TABLE_SIZE 10
+
+static handle_info handle_table[HANDLE_TABLE_SIZE];
+
+typedef struct {
+ uint16_t handle;
+ uint16_t cid;
+ uint16_t psm;
+ uint16_t num;
+ uint8_t mode;
+} cid_info;
+#define CID_TABLE_SIZE 20
+
+static cid_info cid_table[2][CID_TABLE_SIZE];
+
+#define SCID cid_table[0]
+#define DCID cid_table[1]
+
+static struct frame *add_handle(uint16_t handle)
+{
+ register handle_info *t = handle_table;
+ register int i;
+
+ for (i = 0; i < HANDLE_TABLE_SIZE; i++)
+ if (!t[i].handle) {
+ t[i].handle = handle;
+ return &t[i].frm;
+ }
+ return NULL;
+}
+
+static struct frame *get_frame(uint16_t handle)
+{
+ register handle_info *t = handle_table;
+ register int i;
+
+ for (i = 0; i < HANDLE_TABLE_SIZE; i++)
+ if (t[i].handle == handle)
+ return &t[i].frm;
+
+ return add_handle(handle);
+}
+
+static void add_cid(int in, uint16_t handle, uint16_t cid, uint16_t psm)
+{
+ register cid_info *table = cid_table[in];
+ register int i, pos = -1;
+ uint16_t num = 1;
+
+ for (i = 0; i < CID_TABLE_SIZE; i++) {
+ if ((pos < 0 && !table[i].cid) || table[i].cid == cid)
+ pos = i;
+ if (table[i].psm == psm)
+ num++;
+ }
+
+ if (pos >= 0) {
+ table[pos].handle = handle;
+ table[pos].cid = cid;
+ table[pos].psm = psm;
+ table[pos].num = num;
+ table[pos].mode = 0;
+ }
+}
+
+static void del_cid(int in, uint16_t dcid, uint16_t scid)
+{
+ register int t, i;
+ uint16_t cid[2];
+
+ if (!in) {
+ cid[0] = dcid;
+ cid[1] = scid;
+ } else {
+ cid[0] = scid;
+ cid[1] = dcid;
+ }
+
+ for (t = 0; t < 2; t++) {
+ for (i = 0; i < CID_TABLE_SIZE; i++)
+ if (cid_table[t][i].cid == cid[t]) {
+ cid_table[t][i].handle = 0;
+ cid_table[t][i].cid = 0;
+ cid_table[t][i].psm = 0;
+ cid_table[t][i].num = 0;
+ cid_table[t][i].mode = 0;
+ break;
+ }
+ }
+}
+
+static void del_handle(uint16_t handle)
+{
+ register int t, i;
+
+ for (t = 0; t < 2; t++) {
+ for (i = 0; i < CID_TABLE_SIZE; i++)
+ if (cid_table[t][i].handle == handle) {
+ cid_table[t][i].handle = 0;
+ cid_table[t][i].cid = 0;
+ cid_table[t][i].psm = 0;
+ cid_table[t][i].num = 0;
+ cid_table[t][i].mode = 0;
+ break;
+ }
+ }
+}
+static uint16_t get_psm(int in, uint16_t cid)
+{
+ register cid_info *table = cid_table[in];
+ register int i;
+
+ for (i = 0; i < CID_TABLE_SIZE; i++)
+ if (table[i].cid == cid)
+ return table[i].psm;
+ return parser.defpsm;
+}
+
+static uint16_t get_num(int in, uint16_t cid)
+{
+ register cid_info *table = cid_table[in];
+ register int i;
+
+ for (i = 0; i < CID_TABLE_SIZE; i++)
+ if (table[i].cid == cid)
+ return table[i].num;
+ return 0;
+}
+
+static void set_mode(int in, uint16_t cid, uint8_t mode)
+{
+ register cid_info *table = cid_table[in];
+ register int i;
+
+ for (i = 0; i < CID_TABLE_SIZE; i++)
+ if (table[i].cid == cid)
+ table[i].mode = mode;
+}
+
+static uint8_t get_mode(int in, uint16_t cid)
+{
+ register cid_info *table = cid_table[in];
+ register int i;
+
+ for (i = 0; i < CID_TABLE_SIZE; i++)
+ if (table[i].cid == cid)
+ return table[i].mode;
+ return 0;
+}
+
+static uint32_t get_val(uint8_t *ptr, uint8_t len)
+{
+ switch (len) {
+ case 1:
+ return *ptr;
+ case 2:
+ return btohs(bt_get_unaligned((uint16_t *) ptr));
+ case 4:
+ return btohl(bt_get_unaligned((uint32_t *) ptr));
+ }
+ return 0;
+}
+
+static char *reason2str(uint16_t reason)
+{
+ switch (reason) {
+ case 0x0000:
+ return "Command not understood";
+ case 0x0001:
+ return "Signalling MTU exceeded";
+ case 0x0002:
+ return "Invalid CID in request";
+ default:
+ return "Reserved";
+ }
+}
+
+static char *connresult2str(uint16_t result)
+{
+ switch (result) {
+ case 0x0000:
+ return "Connection successful";
+ case 0x0001:
+ return "Connection pending";
+ case 0x0002:
+ return "Connection refused - PSM not supported";
+ case 0x0003:
+ return "Connection refused - security block";
+ case 0x0004:
+ return "Connection refused - no resources available";
+ default:
+ return "Reserved";
+ }
+}
+
+static char *status2str(uint16_t status)
+{
+ switch (status) {
+ case 0x0000:
+ return "No futher information available";
+ case 0x0001:
+ return "Authentication pending";
+ case 0x0002:
+ return "Authorization pending";
+ default:
+ return "Reserved";
+ }
+}
+
+static char *confresult2str(uint16_t result)
+{
+ switch (result) {
+ case 0x0000:
+ return "Success";
+ case 0x0001:
+ return "Failure - unacceptable parameters";
+ case 0x0002:
+ return "Failure - rejected (no reason provided)";
+ case 0x0003:
+ return "Failure - unknown options";
+ default:
+ return "Reserved";
+ }
+}
+static char *inforesult2str(uint16_t result)
+{
+ switch (result) {
+ case 0x0000:
+ return "Success";
+ case 0x0001:
+ return "Not supported";
+ default:
+ return "Reserved";
+ }
+}
+
+static char *type2str(uint8_t type)
+{
+ switch (type) {
+ case 0x00:
+ return "No traffic";
+ case 0x01:
+ return "Best effort";
+ case 0x02:
+ return "Guaranteed";
+ default:
+ return "Reserved";
+ }
+}
+
+static char *mode2str(uint8_t mode)
+{
+ switch (mode) {
+ case 0x00:
+ return "Basic";
+ case 0x01:
+ return "Retransmission";
+ case 0x02:
+ return "Flow control";
+ default:
+ return "Reserved";
+ }
+}
+
+static char *sar2str(uint8_t sar)
+{
+ switch (sar) {
+ case 0x00:
+ return "Unsegmented";
+ case 0x01:
+ return "Start";
+ case 0x02:
+ return "End";
+ case 0x03:
+ return "Continuation";
+ default:
+ return "Bad SAR";
+
+ }
+}
+
+static char *supervisory2str(uint8_t supervisory)
+{
+ switch (supervisory) {
+ case 0x00:
+ return "Receiver Ready (RR)";
+ case 0x01:
+ return "Reject (REJ)";
+ case 0x02:
+ case 0x03:
+ return "Reserved Supervisory";
+ default:
+ return "Bad Supervisory";
+ }
+}
+
+static inline void command_rej(int level, struct frame *frm)
+{
+ l2cap_cmd_rej *h = frm->ptr;
+ uint16_t reason = btohs(h->reason);
+ uint32_t cid;
+
+ printf("Command rej: reason %d", reason);
+
+ switch (reason) {
+ case 0x0001:
+ printf(" mtu %d\n", get_val(frm->ptr + L2CAP_CMD_REJ_SIZE, 2));
+ break;
+ case 0x0002:
+ cid = get_val(frm->ptr + L2CAP_CMD_REJ_SIZE, 4);
+ printf(" dcid 0x%4.4x scid 0x%4.4x\n", cid & 0xffff, cid >> 16);
+ break;
+ default:
+ printf("\n");
+ break;
+ }
+
+ p_indent(level + 1, frm);
+ printf("%s\n", reason2str(reason));
+}
+
+static inline void conn_req(int level, struct frame *frm)
+{
+ l2cap_conn_req *h = frm->ptr;
+ uint16_t psm = btohs(h->psm);
+ uint16_t scid = btohs(h->scid);
+
+ add_cid(frm->in, frm->handle, scid, psm);
+
+ if (p_filter(FILT_L2CAP))
+ return;
+
+ printf("Connect req: psm %d scid 0x%4.4x\n", psm, scid);
+}
+
+static inline void conn_rsp(int level, struct frame *frm)
+{
+ l2cap_conn_rsp *h = frm->ptr;
+ uint16_t scid = btohs(h->scid);
+ uint16_t dcid = btohs(h->dcid);
+ uint16_t result = btohs(h->result);
+ uint16_t status = btohs(h->status);
+ uint16_t psm;
+
+ switch (h->result) {
+ case L2CAP_CR_SUCCESS:
+ if ((psm = get_psm(!frm->in, scid)))
+ add_cid(frm->in, frm->handle, dcid, psm);
+ break;
+
+ case L2CAP_CR_PEND:
+ break;
+
+ default:
+ del_cid(frm->in, dcid, scid);
+ break;
+ }
+
+ if (p_filter(FILT_L2CAP))
+ return;
+
+ printf("Connect rsp: dcid 0x%4.4x scid 0x%4.4x result %d status %d\n",
+ dcid, scid, result, status);
+
+ p_indent(level + 1, frm);
+ printf("%s", connresult2str(result));
+
+ if (result == 0x0001)
+ printf(" - %s\n", status2str(status));
+ else
+ printf("\n");
+}
+
+static void conf_rfc(void *ptr, int len, int in, uint16_t cid)
+{
+ uint8_t mode;
+
+ mode = *((uint8_t *) ptr);
+ set_mode(in, cid, mode);
+
+ printf("RFC 0x%02x (%s", mode, mode2str(mode));
+ if (mode == 0x01 || mode == 0x02) {
+ uint8_t txwin, maxtrans;
+ uint16_t rto, mto, mps;
+ txwin = *((uint8_t *) (ptr + 1));
+ maxtrans = *((uint8_t *) (ptr + 2));
+ rto = btohs(bt_get_unaligned((uint16_t *) (ptr + 3)));
+ mto = btohs(bt_get_unaligned((uint16_t *) (ptr + 5)));
+ mps = btohs(bt_get_unaligned((uint16_t *) (ptr + 7)));
+ printf(", TxWin %d, MaxTx %d, RTo %d, MTo %d, MPS %d",
+ txwin, maxtrans, rto, mto, mps);
+ }
+ printf(")");
+}
+
+static void conf_opt(int level, void *ptr, int len, int in, uint16_t cid)
+{
+ p_indent(level, 0);
+ while (len > 0) {
+ l2cap_conf_opt *h = ptr;
+
+ ptr += L2CAP_CONF_OPT_SIZE + h->len;
+ len -= L2CAP_CONF_OPT_SIZE + h->len;
+
+ if (h->type & 0x80)
+ printf("[");
+
+ switch (h->type & 0x7f) {
+ case L2CAP_CONF_MTU:
+ set_mode(in, cid, 0x00);
+ printf("MTU");
+ if (h->len > 0)
+ printf(" %d", get_val(h->val, h->len));
+ break;
+
+ case L2CAP_CONF_FLUSH_TO:
+ printf("FlushTO");
+ if (h->len > 0)
+ printf(" %d", get_val(h->val, h->len));
+ break;
+
+ case L2CAP_CONF_QOS:
+ printf("QoS");
+ if (h->len > 0)
+ printf(" 0x%02x (%s)", *(h->val + 1), type2str(*(h->val + 1)));
+ break;
+
+ case L2CAP_CONF_RFC:
+ conf_rfc(h->val, h->len, in, cid);
+ break;
+
+ default:
+ printf("Unknown (type %2.2x, len %d)", h->type & 0x7f, h->len);
+ break;
+ }
+
+ if (h->type & 0x80)
+ printf("] ");
+ else
+ printf(" ");
+ }
+ printf("\n");
+}
+
+static void conf_list(int level, uint8_t *list, int len)
+{
+ int i;
+
+ p_indent(level, 0);
+ for (i = 0; i < len; i++) {
+ switch (list[i] & 0x7f) {
+ case L2CAP_CONF_MTU:
+ printf("MTU ");
+ break;
+ case L2CAP_CONF_FLUSH_TO:
+ printf("FlushTo ");
+ break;
+ case L2CAP_CONF_QOS:
+ printf("QoS ");
+ break;
+ case L2CAP_CONF_RFC:
+ printf("RFC ");
+ break;
+ default:
+ printf("%2.2x ", list[i] & 0x7f);
+ break;
+ }
+ }
+ printf("\n");
+}
+
+static inline void conf_req(int level, l2cap_cmd_hdr *cmd, struct frame *frm)
+{
+ l2cap_conf_req *h = frm->ptr;
+ uint16_t dcid = btohs(h->dcid);
+ int clen = btohs(cmd->len) - L2CAP_CONF_REQ_SIZE;
+
+ if (p_filter(FILT_L2CAP))
+ return;
+
+ printf("Config req: dcid 0x%4.4x flags 0x%2.2x clen %d\n",
+ dcid, btohs(h->flags), clen);
+
+ if (clen > 0)
+ conf_opt(level + 1, h->data, clen, frm->in, dcid);
+}
+
+static inline void conf_rsp(int level, l2cap_cmd_hdr *cmd, struct frame *frm)
+{
+ l2cap_conf_rsp *h = frm->ptr;
+ uint16_t scid = btohs(h->scid);
+ uint16_t result = btohs(h->result);
+ int clen = btohs(cmd->len) - L2CAP_CONF_RSP_SIZE;
+
+ if (p_filter(FILT_L2CAP))
+ return;
+
+ printf("Config rsp: scid 0x%4.4x flags 0x%2.2x result %d clen %d\n",
+ scid, btohs(h->flags), result, clen);
+
+ if (clen > 0) {
+ if (result) {
+ p_indent(level + 1, frm);
+ printf("%s\n", confresult2str(result));
+ }
+ if (result == 0x0003)
+ conf_list(level + 1, h->data, clen);
+ else
+ conf_opt(level + 1, h->data, clen, frm->in, scid);
+ } else {
+ p_indent(level + 1, frm);
+ printf("%s\n", confresult2str(result));
+ }
+}
+
+static inline void disconn_req(int level, struct frame *frm)
+{
+ l2cap_disconn_req *h = frm->ptr;
+
+ if (p_filter(FILT_L2CAP))
+ return;
+
+ printf("Disconn req: dcid 0x%4.4x scid 0x%4.4x\n",
+ btohs(h->dcid), btohs(h->scid));
+}
+
+static inline void disconn_rsp(int level, struct frame *frm)
+{
+ l2cap_disconn_rsp *h = frm->ptr;
+ uint16_t dcid = btohs(h->dcid);
+ uint16_t scid = btohs(h->scid);
+
+ del_cid(frm->in, dcid, scid);
+
+ if (p_filter(FILT_L2CAP))
+ return;
+
+ printf("Disconn rsp: dcid 0x%4.4x scid 0x%4.4x\n",
+ btohs(h->dcid), btohs(h->scid));
+}
+
+static inline void echo_req(int level, l2cap_cmd_hdr *cmd, struct frame *frm)
+{
+ if (p_filter(FILT_L2CAP))
+ return;
+
+ printf("Echo req: dlen %d\n", btohs(cmd->len));
+ raw_dump(level, frm);
+}
+
+static inline void echo_rsp(int level, l2cap_cmd_hdr *cmd, struct frame *frm)
+{
+ if (p_filter(FILT_L2CAP))
+ return;
+
+ printf("Echo rsp: dlen %d\n", btohs(cmd->len));
+ raw_dump(level, frm);
+}
+
+static void info_opt(int level, int type, void *ptr, int len)
+{
+ uint32_t mask;
+
+ p_indent(level, 0);
+
+ switch (type) {
+ case 0x0001:
+ printf("Connectionless MTU %d\n", get_val(ptr, len));
+ break;
+ case 0x0002:
+ mask = get_val(ptr, len);
+ printf("Extended feature mask 0x%4.4x\n", mask);
+ if (parser.flags & DUMP_VERBOSE) {
+ if (mask & 0x01) {
+ p_indent(level + 1, 0);
+ printf("Flow control mode\n");
+ }
+ if (mask & 0x02) {
+ p_indent(level + 1, 0);
+ printf("Retransmission mode\n");
+ }
+ if (mask & 0x04) {
+ p_indent(level + 1, 0);
+ printf("Bi-directional QoS\n");
+ }
+ }
+ break;
+ default:
+ printf("Unknown (len %d)\n", len);
+ break;
+ }
+}
+
+static inline void info_req(int level, l2cap_cmd_hdr *cmd, struct frame *frm)
+{
+ l2cap_info_req *h = frm->ptr;
+
+ if (p_filter(FILT_L2CAP))
+ return;
+
+ printf("Info req: type %d\n", btohs(h->type));
+}
+
+static inline void info_rsp(int level, l2cap_cmd_hdr *cmd, struct frame *frm)
+{
+ l2cap_info_rsp *h = frm->ptr;
+ uint16_t type = btohs(h->type);
+ uint16_t result = btohs(h->result);
+ int ilen = btohs(cmd->len) - L2CAP_INFO_RSP_SIZE;
+
+ if (p_filter(FILT_L2CAP))
+ return;
+
+ printf("Info rsp: type %d result %d\n", type, result);
+
+ if (ilen > 0) {
+ info_opt(level + 1, type, h->data, ilen);
+ } else {
+ p_indent(level + 1, frm);
+ printf("%s\n", inforesult2str(result));
+ }
+}
+
+static void l2cap_parse(int level, struct frame *frm)
+{
+ l2cap_hdr *hdr = (void *)frm->ptr;
+ uint16_t dlen = btohs(hdr->len);
+ uint16_t cid = btohs(hdr->cid);
+ uint16_t psm;
+
+ frm->ptr += L2CAP_HDR_SIZE;
+ frm->len -= L2CAP_HDR_SIZE;
+
+ if (cid == 0x1) {
+ /* Signaling channel */
+
+ while (frm->len >= L2CAP_CMD_HDR_SIZE) {
+ l2cap_cmd_hdr *hdr = frm->ptr;
+
+ frm->ptr += L2CAP_CMD_HDR_SIZE;
+ frm->len -= L2CAP_CMD_HDR_SIZE;
+
+ if (!p_filter(FILT_L2CAP)) {
+ p_indent(level, frm);
+ printf("L2CAP(s): ");
+ }
+
+ switch (hdr->code) {
+ case L2CAP_COMMAND_REJ:
+ command_rej(level, frm);
+ break;
+
+ case L2CAP_CONN_REQ:
+ conn_req(level, frm);
+ break;
+
+ case L2CAP_CONN_RSP:
+ conn_rsp(level, frm);
+ break;
+
+ case L2CAP_CONF_REQ:
+ conf_req(level, hdr, frm);
+ break;
+
+ case L2CAP_CONF_RSP:
+ conf_rsp(level, hdr, frm);
+ break;
+
+ case L2CAP_DISCONN_REQ:
+ disconn_req(level, frm);
+ break;
+
+ case L2CAP_DISCONN_RSP:
+ disconn_rsp(level, frm);
+ break;
+
+ case L2CAP_ECHO_REQ:
+ echo_req(level, hdr, frm);
+ break;
+
+ case L2CAP_ECHO_RSP:
+ echo_rsp(level, hdr, frm);
+ break;
+
+ case L2CAP_INFO_REQ:
+ info_req(level, hdr, frm);
+ break;
+
+ case L2CAP_INFO_RSP:
+ info_rsp(level, hdr, frm);
+ break;
+
+ default:
+ if (p_filter(FILT_L2CAP))
+ break;
+ printf("code 0x%2.2x ident %d len %d\n",
+ hdr->code, hdr->ident, btohs(hdr->len));
+ raw_dump(level, frm);
+ }
+
+ if (frm->len > btohs(hdr->len)) {
+ frm->len -= btohs(hdr->len);
+ frm->ptr += btohs(hdr->len);
+ } else
+ frm->len = 0;
+ }
+ } else if (cid == 0x2) {
+ /* Connectionless channel */
+
+ if (p_filter(FILT_L2CAP))
+ return;
+
+ psm = btohs(bt_get_unaligned((uint16_t *) frm->ptr));
+ frm->ptr += 2;
+ frm->len -= 2;
+
+ p_indent(level, frm);
+ printf("L2CAP(c): len %d psm %d\n", dlen, psm);
+ raw_dump(level, frm);
+ } else {
+ /* Connection oriented channel */
+
+ uint8_t mode = get_mode(!frm->in, cid);
+ uint16_t psm = get_psm(!frm->in, cid);
+ uint16_t ctrl = 0, fcs = 0;
+ uint32_t proto;
+
+ frm->cid = cid;
+ frm->num = get_num(!frm->in, cid);
+
+ if (mode > 0) {
+ ctrl = btohs(bt_get_unaligned((uint16_t *) frm->ptr));
+ frm->ptr += 2;
+ frm->len -= 4;
+ fcs = btohs(bt_get_unaligned((uint16_t *) (frm->ptr + frm->len)));
+ }
+
+ if (!p_filter(FILT_L2CAP)) {
+ p_indent(level, frm);
+ printf("L2CAP(d): cid 0x%4.4x len %d", cid, dlen);
+ if (mode > 0)
+ printf(" ctrl 0x%4.4x fcs 0x%4.4x", ctrl, fcs);
+ printf(" [psm %d]\n", psm);
+ level++;
+ if (mode > 0) {
+ p_indent(level, frm);
+ printf("%s:", ctrl & 0x01 ? "S-frame" : "I-frame");
+ if (ctrl & 0x01) {
+ printf(" %s", supervisory2str((ctrl & 0x0c) >> 2));
+ } else {
+ uint8_t sar = (ctrl & 0xc000) >> 14;
+ printf(" %s", sar2str(sar));
+ if (sar == 1) {
+ uint16_t len;
+ len = btohs(bt_get_unaligned((uint16_t *) frm->ptr));
+ frm->ptr += 2;
+ frm->len -= 2;
+ printf(" (len %d)", len);
+ }
+ printf(" TxSeq %d", (ctrl & 0x7e) >> 1);
+ }
+ printf(" ReqSeq %d", (ctrl & 0x3f00) >> 8);
+ if (ctrl & 0x80)
+ printf(" Retransmission Disable");
+ printf("\n");
+ }
+ }
+
+ switch (psm) {
+ case 0x01:
+ if (!p_filter(FILT_SDP))
+ sdp_dump(level + 1, frm);
+ else
+ raw_dump(level + 1, frm);
+ break;
+
+ case 0x03:
+ if (!p_filter(FILT_RFCOMM))
+ rfcomm_dump(level, frm);
+ else
+ raw_dump(level + 1, frm);
+ break;
+
+ case 0x0f:
+ if (!p_filter(FILT_BNEP))
+ bnep_dump(level, frm);
+ else
+ raw_dump(level + 1, frm);
+ break;
+
+ case 0x11:
+ case 0x13:
+ if (!p_filter(FILT_HIDP))
+ hidp_dump(level, frm);
+ else
+ raw_dump(level + 1, frm);
+ break;
+
+ case 0x17:
+ if (!p_filter(FILT_AVCTP))
+ avctp_dump(level, frm);
+ else
+ raw_dump(level + 1, frm);
+ break;
+
+ case 0x19:
+ if (!p_filter(FILT_AVDTP))
+ avdtp_dump(level, frm);
+ else
+ raw_dump(level + 1, frm);
+ break;
+
+ default:
+ proto = get_proto(frm->handle, psm, 0);
+
+ switch (proto) {
+ case SDP_UUID_CMTP:
+ if (!p_filter(FILT_CMTP))
+ cmtp_dump(level, frm);
+ else
+ raw_dump(level + 1, frm);
+ break;
+
+ case SDP_UUID_HARDCOPY_CONTROL_CHANNEL:
+ if (!p_filter(FILT_HCRP))
+ hcrp_dump(level, frm);
+ else
+ raw_dump(level + 1, frm);
+ break;
+
+ default:
+ if (p_filter(FILT_L2CAP))
+ break;
+
+ raw_dump(level, frm);
+ break;
+ }
+ break;
+ }
+ }
+}
+
+void l2cap_dump(int level, struct frame *frm)
+{
+ struct frame *fr;
+ l2cap_hdr *hdr;
+ uint16_t dlen;
+
+ if (frm->flags & ACL_START) {
+ hdr = frm->ptr;
+ dlen = btohs(hdr->len);
+
+ if (frm->len == (dlen + L2CAP_HDR_SIZE)) {
+ /* Complete frame */
+ l2cap_parse(level, frm);
+ return;
+ }
+
+ if (!(fr = get_frame(frm->handle))) {
+ fprintf(stderr, "Not enough connection handles\n");
+ raw_dump(level, frm);
+ return;
+ }
+
+ if (fr->data)
+ free(fr->data);
+
+ if (!(fr->data = malloc(dlen + L2CAP_HDR_SIZE))) {
+ perror("Can't allocate L2CAP reassembly buffer");
+ return;
+ }
+ memcpy(fr->data, frm->ptr, frm->len);
+ fr->data_len = dlen + L2CAP_HDR_SIZE;
+ fr->len = frm->len;
+ fr->ptr = fr->data;
+ fr->dev_id = frm->dev_id;
+ fr->in = frm->in;
+ fr->ts = frm->ts;
+ fr->handle = frm->handle;
+ fr->cid = frm->cid;
+ fr->num = frm->num;
+ fr->dlci = frm->dlci;
+ fr->channel = frm->channel;
+ fr->pppdump_fd = frm->pppdump_fd;
+ fr->audio_fd = frm->audio_fd;
+ } else {
+ if (!(fr = get_frame(frm->handle))) {
+ fprintf(stderr, "Not enough connection handles\n");
+ raw_dump(level, frm);
+ return;
+ }
+
+ if (!fr->data) {
+ /* Unexpected fragment */
+ raw_dump(level, frm);
+ return;
+ }
+
+ if (frm->len > (fr->data_len - fr->len)) {
+ /* Bad fragment */
+ raw_dump(level, frm);
+ free(fr->data); fr->data = NULL;
+ return;
+ }
+
+ memcpy(fr->data + fr->len, frm->ptr, frm->len);
+ fr->len += frm->len;
+
+ if (fr->len == fr->data_len) {
+ /* Complete frame */
+ l2cap_parse(level, fr);
+
+ free(fr->data); fr->data = NULL;
+ return;
+ }
+ }
+}
+
+void l2cap_clear(uint16_t handle)
+{
+ del_handle(handle);
+}
--- /dev/null
+/*
+ *
+ * BlueZ - Bluetooth protocol stack for Linux
+ *
+ * Copyright (C) 2004-2007 Marcel Holtmann <marcel@holtmann.org>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include <stdio.h>
+#include <errno.h>
+#include <ctype.h>
+#include <sys/socket.h>
+
+#include <bluetooth/bluetooth.h>
+#include <bluetooth/hci.h>
+#include <bluetooth/hci_lib.h>
+
+#include "parser.h"
+
+#define LMP_U8(frm) (get_u8(frm))
+#define LMP_U16(frm) (btohs(htons(get_u16(frm))))
+#define LMP_U32(frm) (btohl(htonl(get_u32(frm))))
+
+static enum {
+ IN_RAND,
+ COMB_KEY_M,
+ COMB_KEY_S,
+ AU_RAND_M,
+ AU_RAND_S,
+ SRES_M,
+ SRES_S,
+} pairing_state = IN_RAND;
+
+static struct {
+ uint8_t in_rand[16];
+ uint8_t comb_key_m[16];
+ uint8_t comb_key_s[16];
+ uint8_t au_rand_m[16];
+ uint8_t au_rand_s[16];
+ uint8_t sres_m[4];
+ uint8_t sres_s[4];
+} pairing_data;
+
+static inline void pairing_data_dump(void)
+{
+ int i;
+
+ p_indent(6, NULL);
+ printf("IN_RAND ");
+ for (i = 0; i < 16; i++)
+ printf("%2.2x", pairing_data.in_rand[i]);
+ printf("\n");
+
+ p_indent(6, NULL);
+ printf("COMB_KEY ");
+ for (i = 0; i < 16; i++)
+ printf("%2.2x", pairing_data.comb_key_m[i]);
+ printf(" (M)\n");
+
+ p_indent(6, NULL);
+ printf("COMB_KEY ");
+ for (i = 0; i < 16; i++)
+ printf("%2.2x", pairing_data.comb_key_s[i]);
+ printf(" (S)\n");
+
+ p_indent(6, NULL);
+ printf("AU_RAND ");
+ for (i = 0; i < 16; i++)
+ printf("%2.2x", pairing_data.au_rand_m[i]);
+ printf(" SRES ");
+ for (i = 0; i < 4; i++)
+ printf("%2.2x", pairing_data.sres_m[i]);
+ printf(" (M)\n");
+
+ p_indent(6, NULL);
+ printf("AU_RAND ");
+ for (i = 0; i < 16; i++)
+ printf("%2.2x", pairing_data.au_rand_s[i]);
+ printf(" SRES ");
+ for (i = 0; i < 4; i++)
+ printf("%2.2x", pairing_data.sres_s[i]);
+ printf(" (S)\n");
+}
+
+static inline void in_rand(struct frame *frm)
+{
+ uint8_t *val = frm->ptr;
+
+ memcpy(pairing_data.in_rand, val, 16);
+ pairing_state = COMB_KEY_M;
+}
+
+static inline void comb_key(struct frame *frm)
+{
+ uint8_t *val = frm->ptr;
+
+ switch (pairing_state) {
+ case COMB_KEY_M:
+ memcpy(pairing_data.comb_key_m, val, 16);
+ pairing_state = COMB_KEY_S;
+ break;
+ case COMB_KEY_S:
+ memcpy(pairing_data.comb_key_s, val, 16);
+ pairing_state = AU_RAND_M;
+ break;
+ default:
+ pairing_state = IN_RAND;
+ break;
+ }
+}
+
+static inline void au_rand(struct frame *frm)
+{
+ uint8_t *val = frm->ptr;
+
+ switch (pairing_state) {
+ case AU_RAND_M:
+ memcpy(pairing_data.au_rand_m, val, 16);
+ pairing_state = SRES_M;
+ break;
+ case AU_RAND_S:
+ memcpy(pairing_data.au_rand_s, val, 16);
+ pairing_state = SRES_S;
+ break;
+ default:
+ pairing_state = IN_RAND;
+ break;
+ }
+}
+
+static inline void sres(struct frame *frm)
+{
+ uint8_t *val = frm->ptr;
+
+ switch (pairing_state) {
+ case SRES_M:
+ memcpy(pairing_data.sres_m, val, 4);
+ pairing_state = AU_RAND_S;
+ break;
+ case SRES_S:
+ memcpy(pairing_data.sres_s, val, 4);
+ pairing_state = IN_RAND;
+ pairing_data_dump();
+ break;
+ default:
+ pairing_state = IN_RAND;
+ break;
+ }
+}
+
+static char *opcode2str(uint16_t opcode)
+{
+ switch (opcode) {
+ case 1:
+ return "name_req";
+ case 2:
+ return "name_res";
+ case 3:
+ return "accepted";
+ case 4:
+ return "not_accepted";
+ case 5:
+ return "clkoffset_req";
+ case 6:
+ return "clkoffset_res";
+ case 7:
+ return "detach";
+ case 8:
+ return "in_rand";
+ case 9:
+ return "comb_key";
+ case 10:
+ return "unit_key";
+ case 11:
+ return "au_rand";
+ case 12:
+ return "sres";
+ case 13:
+ return "temp_rand";
+ case 14:
+ return "temp_key";
+ case 15:
+ return "encryption_mode_req";
+ case 16:
+ return "encryption_key_size_req";
+ case 17:
+ return "start_encryption_req";
+ case 18:
+ return "stop_encryption_req";
+ case 19:
+ return "switch_req";
+ case 20:
+ return "hold";
+ case 21:
+ return "hold_req";
+ case 22:
+ return "sniff";
+ case 23:
+ return "sniff_req";
+ case 24:
+ return "unsniff_req";
+ case 25:
+ return "park_req";
+ case 26:
+ return "park";
+ case 27:
+ return "set_broadcast_scan_window";
+ case 28:
+ return "modify_beacon";
+ case 29:
+ return "unpark_BD_ADDR_req";
+ case 30:
+ return "unpark_PM_ADDR_req";
+ case 31:
+ return "incr_power_req";
+ case 32:
+ return "decr_power_req";
+ case 33:
+ return "max_power";
+ case 34:
+ return "min_power";
+ case 35:
+ return "auto_rate";
+ case 36:
+ return "preferred_rate";
+ case 37:
+ return "version_req";
+ case 38:
+ return "version_res";
+ case 39:
+ return "feature_req";
+ case 40:
+ return "feature_res";
+ case 41:
+ return "quality_of_service";
+ case 42:
+ return "quality_of_service_req";
+ case 43:
+ return "SCO_link_req";
+ case 44:
+ return "remove_SCO_link_req";
+ case 45:
+ return "max_slot";
+ case 46:
+ return "max_slot_req";
+ case 47:
+ return "timing_accuracy_req";
+ case 48:
+ return "timing_accuracy_res";
+ case 49:
+ return "setup_complete";
+ case 50:
+ return "use_semi_permanent_key";
+ case 51:
+ return "host_connection_req";
+ case 52:
+ return "slot_offset";
+ case 53:
+ return "page_mode_req";
+ case 54:
+ return "page_scan_mode_req";
+ case 55:
+ return "supervision_timeout";
+ case 56:
+ return "test_activate";
+ case 57:
+ return "test_control";
+ case 58:
+ return "encryption_key_size_mask_req";
+ case 59:
+ return "encryption_key_size_mask_res";
+ case 60:
+ return "set_AFH";
+ case 61:
+ return "encapsulated_header";
+ case 62:
+ return "encapsulated_payload";
+ case 63:
+ return "simple_pairing_confirm";
+ case 64:
+ return "simple_pairing_number";
+ case 65:
+ return "DHkey_check";
+ case 127 + (1 << 7):
+ return "accepted_ext";
+ case 127 + (2 << 7):
+ return "not_accepted_ext";
+ case 127 + (3 << 7):
+ return "features_req_ext";
+ case 127 + (4 << 7):
+ return "features_res_ext";
+ case 127 + (11 << 7):
+ return "packet_type_table_req";
+ case 127 + (12 << 7):
+ return "eSCO_link_req";
+ case 127 + (13 << 7):
+ return "remove_eSCO_link_req";
+ case 127 + (16 << 7):
+ return "channel_classification_req";
+ case 127 + (17 << 7):
+ return "channel_classification";
+ case 127 + (21 << 7):
+ return "sniff_subrating_req";
+ case 127 + (22 << 7):
+ return "sniff_subrating_res";
+ case 127 + (23 << 7):
+ return "pause_encryption_req";
+ case 127 + (24 << 7):
+ return "resume_encryption_req";
+ case 127 + (25 << 7):
+ return "IO_capability_req";
+ case 127 + (26 << 7):
+ return "IO_capability_res";
+ case 127 + (27 << 7):
+ return "numeric_comparison_failed";
+ case 127 + (28 << 7):
+ return "passkey_failed";
+ case 127 + (29 << 7):
+ return "oob_failed";
+ case 127 + (30 << 7):
+ return "keypress_notification";
+ default:
+ return "unknown";
+ }
+}
+
+static inline void name_req_dump(int level, struct frame *frm)
+{
+ uint8_t offset = LMP_U8(frm);
+
+ p_indent(level, frm);
+ printf("name offset %d\n", offset);
+}
+
+static inline void name_res_dump(int level, struct frame *frm)
+{
+ uint8_t offset = LMP_U8(frm);
+ uint8_t length = LMP_U8(frm);
+ uint8_t *name = frm->ptr;
+ int i, size;
+
+ frm->ptr += 14;
+ frm->len -= 14;
+
+ p_indent(level, frm);
+ printf("name offset %d\n", offset);
+
+ p_indent(level, frm);
+ printf("name length %d\n", length);
+
+ size = length - offset;
+ if (size > 14)
+ size = 14;
+
+ p_indent(level, frm);
+ printf("name fragment '");
+ for (i = 0; i < size; i++)
+ if (isprint(name[i]))
+ printf("%c", name[i]);
+ else
+ printf(".");
+ printf("'\n");
+}
+
+static inline void accepted_dump(int level, struct frame *frm)
+{
+ uint8_t opcode = LMP_U8(frm);
+
+ p_indent(level, frm);
+ printf("op code %d (%s)\n", opcode, opcode2str(opcode));
+}
+
+static inline void not_accepted_dump(int level, struct frame *frm)
+{
+ uint8_t opcode = LMP_U8(frm);
+ uint8_t error = LMP_U8(frm);
+
+ p_indent(level, frm);
+ printf("op code %d (%s)\n", opcode, opcode2str(opcode));
+
+ p_indent(level, frm);
+ printf("error code 0x%2.2x\n", error);
+}
+
+static inline void clkoffset_dump(int level, struct frame *frm)
+{
+ uint16_t clkoffset = LMP_U16(frm);
+
+ p_indent(level, frm);
+ printf("clock offset 0x%4.4x\n", clkoffset);
+}
+
+static inline void detach_dump(int level, struct frame *frm)
+{
+ uint8_t error = LMP_U8(frm);
+
+ p_indent(level, frm);
+ printf("error code 0x%2.2x\n", error);
+}
+
+static inline void random_number_dump(int level, struct frame *frm)
+{
+ uint8_t *number = frm->ptr;
+ int i;
+
+ frm->ptr += 16;
+ frm->len -= 16;
+
+ p_indent(level, frm);
+ printf("random number ");
+ for (i = 0; i < 16; i++)
+ printf("%2.2x", number[i]);
+ printf("\n");
+}
+
+static inline void key_dump(int level, struct frame *frm)
+{
+ uint8_t *key = frm->ptr;
+ int i;
+
+ frm->ptr += 16;
+ frm->len -= 16;
+
+ p_indent(level, frm);
+ printf("key ");
+ for (i = 0; i < 16; i++)
+ printf("%2.2x", key[i]);
+ printf("\n");
+}
+
+static inline void auth_resp_dump(int level, struct frame *frm)
+{
+ uint8_t *resp = frm->ptr;
+ int i;
+
+ frm->ptr += 4;
+ frm->ptr -= 4;
+
+ p_indent(level, frm);
+ printf("authentication response ");
+ for (i = 0; i < 4; i++)
+ printf("%2.2x", resp[i]);
+ printf("\n");
+}
+
+static inline void encryption_mode_req_dump(int level, struct frame *frm)
+{
+ uint8_t mode = LMP_U8(frm);
+
+ p_indent(level, frm);
+ printf("encryption mode %d\n", mode);
+}
+
+static inline void encryption_key_size_req_dump(int level, struct frame *frm)
+{
+ uint8_t keysize = LMP_U8(frm);
+
+ p_indent(level, frm);
+ printf("key size %d\n", keysize);
+}
+
+static inline void switch_req_dump(int level, struct frame *frm)
+{
+ uint32_t instant = LMP_U32(frm);
+
+ p_indent(level, frm);
+ printf("switch instant 0x%4.4x\n", instant);
+}
+
+static inline void hold_dump(int level, struct frame *frm)
+{
+ uint16_t time = LMP_U16(frm);
+ uint32_t instant = LMP_U32(frm);
+
+ p_indent(level, frm);
+ printf("hold time 0x%4.4x\n", time);
+
+ p_indent(level, frm);
+ printf("hold instant 0x%4.4x\n", instant);
+}
+
+static inline void sniff_req_dump(int level, struct frame *frm)
+{
+ uint8_t timing = LMP_U8(frm);
+ uint16_t dsniff = LMP_U16(frm);
+ uint16_t tsniff = LMP_U16(frm);
+ uint16_t attempt = LMP_U16(frm);
+ uint16_t timeout = LMP_U16(frm);
+
+ p_indent(level, frm);
+ printf("timing control flags 0x%2.2x\n", timing);
+
+ p_indent(level, frm);
+ printf("D_sniff %d T_sniff %d\n", dsniff, tsniff);
+
+ p_indent(level, frm);
+ printf("sniff attempt %d\n", attempt);
+
+ p_indent(level, frm);
+ printf("sniff timeout %d\n", timeout);
+}
+
+static inline void park_req_dump(int level, struct frame *frm)
+{
+ uint8_t timing = LMP_U8(frm);
+ uint16_t db = LMP_U16(frm);
+ uint16_t tb = LMP_U16(frm);
+ uint8_t nb = LMP_U8(frm);
+ uint8_t xb = LMP_U8(frm);
+ uint8_t pmaddr = LMP_U8(frm);
+ uint8_t araddr = LMP_U8(frm);
+ uint8_t nbsleep = LMP_U8(frm);
+ uint8_t dbsleep = LMP_U8(frm);
+ uint8_t daccess = LMP_U8(frm);
+ uint8_t taccess = LMP_U8(frm);
+ uint8_t nslots = LMP_U8(frm);
+ uint8_t npoll = LMP_U8(frm);
+ uint8_t access = LMP_U8(frm);
+
+ p_indent(level, frm);
+ printf("timing control flags 0x%2.2x\n", timing);
+
+ p_indent(level, frm);
+ printf("D_B %d T_B %d N_B %d X_B %d\n", db, tb, nb, xb);
+
+ p_indent(level, frm);
+ printf("PM_ADDR %d AR_ADDR %d\n", pmaddr, araddr);
+
+ p_indent(level, frm);
+ printf("N_Bsleep %d D_Bsleep %d\n", nbsleep, dbsleep);
+
+ p_indent(level, frm);
+ printf("D_access %d T_access %d\n", daccess, taccess);
+
+ p_indent(level, frm);
+ printf("N_acc-slots %d N_poll %d\n", nslots, npoll);
+
+ p_indent(level, frm);
+ printf("M_access %d\n", access & 0x0f);
+
+ p_indent(level, frm);
+ printf("access scheme 0x%2.2x\n", access >> 4);
+}
+
+static inline void modify_beacon_dump(int level, struct frame *frm)
+{
+ uint8_t timing = LMP_U8(frm);
+ uint16_t db = LMP_U16(frm);
+ uint16_t tb = LMP_U16(frm);
+ uint8_t nb = LMP_U8(frm);
+ uint8_t xb = LMP_U8(frm);
+ uint8_t daccess = LMP_U8(frm);
+ uint8_t taccess = LMP_U8(frm);
+ uint8_t nslots = LMP_U8(frm);
+ uint8_t npoll = LMP_U8(frm);
+ uint8_t access = LMP_U8(frm);
+
+ p_indent(level, frm);
+ printf("timing control flags 0x%2.2x\n", timing);
+
+ p_indent(level, frm);
+ printf("D_B %d T_B %d N_B %d X_B %d\n", db, tb, nb, xb);
+
+ p_indent(level, frm);
+ printf("D_access %d T_access %d\n", daccess, taccess);
+
+ p_indent(level, frm);
+ printf("N_acc-slots %d N_poll %d\n", nslots, npoll);
+
+ p_indent(level, frm);
+ printf("M_access %d\n", access & 0x0f);
+
+ p_indent(level, frm);
+ printf("access scheme 0x%2.2x\n", access >> 4);
+}
+
+static inline void power_req_dump(int level, struct frame *frm)
+{
+ uint8_t val = LMP_U8(frm);
+
+ p_indent(level, frm);
+ printf("future use 0x%2.2x\n", val);
+}
+
+static inline void preferred_rate_dump(int level, struct frame *frm)
+{
+ uint8_t rate = LMP_U8(frm);
+
+ p_indent(level, frm);
+ printf("data rate 0x%2.2x\n", rate);
+
+ p_indent(level, frm);
+ printf("Basic: ");
+
+ printf("%suse FEC, ", rate & 0x01 ? "do not " : "");
+
+ switch ((rate >> 1) & 0x03) {
+ case 0x00:
+ printf("no packet-size preference\n");
+ break;
+ case 0x01:
+ printf("use 1-slot packets\n");
+ break;
+ case 0x02:
+ printf("use 3-slot packets\n");
+ break;
+ case 0x03:
+ printf("use 5-slot packets\n");
+ break;
+ }
+
+ p_indent(level, frm);
+ printf("EDR: ");
+
+ switch ((rate >> 3) & 0x03) {
+ case 0x00:
+ printf("use DM1 packets, ");
+ break;
+ case 0x01:
+ printf("use 2 Mbps packets, ");
+ break;
+ case 0x02:
+ printf("use 3 Mbps packets, ");
+ break;
+ case 0x03:
+ printf("reserved, \n");
+ break;
+ }
+
+ switch ((rate >> 5) & 0x03) {
+ case 0x00:
+ printf("no packet-size preference\n");
+ break;
+ case 0x01:
+ printf("use 1-slot packets\n");
+ break;
+ case 0x02:
+ printf("use 3-slot packets\n");
+ break;
+ case 0x03:
+ printf("use 5-slot packets\n");
+ break;
+ }
+}
+
+static inline void version_dump(int level, struct frame *frm)
+{
+ uint8_t ver = LMP_U8(frm);
+ uint16_t compid = LMP_U16(frm);
+ uint16_t subver = LMP_U16(frm);
+ char *tmp;
+
+ p_indent(level, frm);
+ tmp = lmp_vertostr(ver);
+ printf("VersNr %d (%s)\n", ver, tmp);
+ bt_free(tmp);
+
+ p_indent(level, frm);
+ printf("CompId %d (%s)\n", compid, bt_compidtostr(compid));
+
+ p_indent(level, frm);
+ printf("SubVersNr %d\n", subver);
+}
+
+static inline void features_dump(int level, struct frame *frm)
+{
+ uint8_t *features = frm->ptr;
+ int i;
+
+ frm->ptr += 8;
+ frm->len -= 8;
+
+ p_indent(level, frm);
+ printf("features");
+ for (i = 0; i < 8; i++)
+ printf(" 0x%2.2x", features[i]);
+ printf("\n");
+}
+
+static inline void set_afh_dump(int level, struct frame *frm)
+{
+ uint32_t instant = LMP_U32(frm);
+ uint8_t mode = LMP_U8(frm);
+ uint8_t *map = frm->ptr;
+ int i;
+
+ frm->ptr += 10;
+ frm->len -= 10;
+
+ p_indent(level, frm);
+ printf("AFH_instant 0x%04x\n", instant);
+
+ p_indent(level, frm);
+ printf("AFH_mode %d\n", mode);
+
+ p_indent(level, frm);
+ printf("AFH_channel_map 0x");
+ for (i = 0; i < 10; i++)
+ printf("%2.2x", map[i]);
+ printf("\n");
+}
+
+static inline void encapsulated_header_dump(int level, struct frame *frm)
+{
+ uint8_t major = LMP_U8(frm);
+ uint8_t minor = LMP_U8(frm);
+ uint8_t length = LMP_U8(frm);
+
+ p_indent(level, frm);
+ printf("major type %d minor type %d payload length %d\n",
+ major, minor, length);
+
+ if (major == 1 && minor == 1) {
+ p_indent(level, frm);
+ printf("P-192 Public Key\n");
+ }
+}
+
+static inline void encapsulated_payload_dump(int level, struct frame *frm)
+{
+ uint8_t *value = frm->ptr;
+ int i;
+
+ frm->ptr += 16;
+ frm->len -= 16;
+
+ p_indent(level, frm);
+ printf("data ");
+ for (i = 0; i < 16; i++)
+ printf("%2.2x", value[i]);
+ printf("\n");
+}
+
+static inline void simple_pairing_confirm_dump(int level, struct frame *frm)
+{
+ uint8_t *value = frm->ptr;
+ int i;
+
+ frm->ptr += 16;
+ frm->len -= 16;
+
+ p_indent(level, frm);
+ printf("commitment value ");
+ for (i = 0; i < 16; i++)
+ printf("%2.2x", value[i]);
+ printf("\n");
+}
+
+static inline void simple_pairing_number_dump(int level, struct frame *frm)
+{
+ uint8_t *value = frm->ptr;
+ int i;
+
+ frm->ptr += 16;
+ frm->len -= 16;
+
+ p_indent(level, frm);
+ printf("nounce value ");
+ for (i = 0; i < 16; i++)
+ printf("%2.2x", value[i]);
+ printf("\n");
+}
+
+static inline void dhkey_check_dump(int level, struct frame *frm)
+{
+ uint8_t *value = frm->ptr;
+ int i;
+
+ frm->ptr += 16;
+ frm->len -= 16;
+
+ p_indent(level, frm);
+ printf("confirmation value ");
+ for (i = 0; i < 16; i++)
+ printf("%2.2x", value[i]);
+ printf("\n");
+}
+
+static inline void accepted_ext_dump(int level, struct frame *frm)
+{
+ uint16_t opcode = LMP_U8(frm) + (LMP_U8(frm) << 7);
+
+ p_indent(level, frm);
+ printf("op code %d/%d (%s)\n", opcode & 0x7f, opcode >> 7, opcode2str(opcode));
+}
+
+static inline void not_accepted_ext_dump(int level, struct frame *frm)
+{
+ uint16_t opcode = LMP_U8(frm) + (LMP_U8(frm) << 7);
+ uint8_t error = LMP_U8(frm);
+
+ p_indent(level, frm);
+ printf("op code %d/%d (%s)\n", opcode & 0x7f, opcode >> 7, opcode2str(opcode));
+
+ p_indent(level, frm);
+ printf("error code 0x%2.2x\n", error);
+}
+
+static inline void features_ext_dump(int level, struct frame *frm)
+{
+ uint8_t page = LMP_U8(frm);
+ uint8_t max = LMP_U8(frm);
+ uint8_t *features = frm->ptr;
+ int i;
+
+ frm->ptr += 8;
+ frm->len -= 8;
+
+ p_indent(level, frm);
+ printf("features page %d\n", page);
+
+ p_indent(level, frm);
+ printf("max supported page %d\n", max);
+
+ p_indent(level, frm);
+ printf("extended features");
+ for (i = 0; i < 8; i++)
+ printf(" 0x%2.2x", features[i]);
+ printf("\n");
+}
+
+static inline void quality_of_service_dump(int level, struct frame *frm)
+{
+ uint16_t interval = LMP_U16(frm);
+ uint8_t nbc = LMP_U8(frm);
+
+ p_indent(level, frm);
+ printf("poll interval %d\n", interval);
+
+ p_indent(level, frm);
+ printf("N_BC %d\n", nbc);
+}
+
+static inline void sco_link_req_dump(int level, struct frame *frm)
+{
+ uint8_t handle = LMP_U8(frm);
+ uint8_t timing = LMP_U8(frm);
+ uint8_t dsco = LMP_U8(frm);
+ uint8_t tsco = LMP_U8(frm);
+ uint8_t packet = LMP_U8(frm);
+ uint8_t airmode = LMP_U8(frm);
+
+ p_indent(level, frm);
+ printf("SCO handle %d\n", handle);
+
+ p_indent(level, frm);
+ printf("timing control flags 0x%2.2x\n", timing);
+
+ p_indent(level, frm);
+ printf("D_SCO %d T_SCO %d\n", dsco, tsco);
+
+ p_indent(level, frm);
+ printf("SCO packet 0x%2.2x\n", packet);
+
+ p_indent(level, frm);
+ printf("air mode 0x%2.2x\n", airmode);
+}
+
+static inline void remove_sco_link_req_dump(int level, struct frame *frm)
+{
+ uint8_t handle = LMP_U8(frm);
+ uint8_t error = LMP_U8(frm);
+
+ p_indent(level, frm);
+ printf("SCO handle %d\n", handle);
+
+ p_indent(level, frm);
+ printf("error code 0x%2.2x\n", error);
+}
+
+static inline void max_slots_dump(int level, struct frame *frm)
+{
+ uint8_t slots = LMP_U8(frm);
+
+ p_indent(level, frm);
+ printf("max slots %d\n", slots);
+}
+
+static inline void timing_accuracy_dump(int level, struct frame *frm)
+{
+ uint8_t drift = LMP_U8(frm);
+ uint8_t jitter = LMP_U8(frm);
+
+ p_indent(level, frm);
+ printf("drift %d\n", drift);
+
+ p_indent(level, frm);
+ printf("jitter %d\n", jitter);
+}
+
+static inline void slot_offset_dump(int level, struct frame *frm)
+{
+ uint16_t offset = LMP_U16(frm);
+ char addr[18];
+
+ p_ba2str((bdaddr_t *) frm->ptr, addr);
+
+ p_indent(level, frm);
+ printf("slot offset %d\n", offset);
+
+ p_indent(level, frm);
+ printf("BD_ADDR %s\n", addr);
+}
+
+static inline void page_mode_dump(int level, struct frame *frm)
+{
+ uint8_t scheme = LMP_U8(frm);
+ uint8_t settings = LMP_U8(frm);
+
+ p_indent(level, frm);
+ printf("page scheme %d\n", scheme);
+
+ p_indent(level, frm);
+ printf("page scheme settings %d\n", settings);
+}
+
+static inline void supervision_timeout_dump(int level, struct frame *frm)
+{
+ uint16_t timeout = LMP_U16(frm);
+
+ p_indent(level, frm);
+ printf("supervision timeout %d\n", timeout);
+}
+
+static inline void test_control_dump(int level, struct frame *frm)
+{
+ uint8_t scenario = LMP_U8(frm);
+ uint8_t hopping = LMP_U8(frm);
+ uint8_t txfreq = LMP_U8(frm);
+ uint8_t rxfreq = LMP_U8(frm);
+ uint8_t power = LMP_U8(frm);
+ uint8_t poll = LMP_U8(frm);
+ uint8_t packet = LMP_U8(frm);
+ uint16_t length = LMP_U16(frm);
+
+ p_indent(level, frm);
+ printf("test scenario %d\n", scenario);
+
+ p_indent(level, frm);
+ printf("hopping mode %d\n", hopping);
+
+ p_indent(level, frm);
+ printf("TX frequency %d\n", txfreq);
+
+ p_indent(level, frm);
+ printf("RX frequency %d\n", rxfreq);
+
+ p_indent(level, frm);
+ printf("power control mode %d\n", power);
+
+ p_indent(level, frm);
+ printf("poll period %d\n", poll);
+
+ p_indent(level, frm);
+ printf("poll period %d\n", poll);
+
+ p_indent(level, frm);
+ printf("packet type 0x%2.2x\n", packet);
+
+ p_indent(level, frm);
+ printf("length of test data %d\n", length);
+}
+
+static inline void encryption_key_size_mask_res_dump(int level, struct frame *frm)
+{
+ uint16_t mask = LMP_U16(frm);
+
+ p_indent(level, frm);
+ printf("key size mask 0x%4.4x\n", mask);
+}
+
+static inline void packet_type_table_dump(int level, struct frame *frm)
+{
+ uint8_t type = LMP_U8(frm);
+
+ p_indent(level, frm);
+ printf("packet type table %d ", type);
+ switch (type) {
+ case 0:
+ printf("(1Mbps only)\n");
+ break;
+ case 1:
+ printf("(2/3Mbps)\n");
+ break;
+ default:
+ printf("(Reserved)\n");
+ break;
+ }
+}
+
+static inline void esco_link_req_dump(int level, struct frame *frm)
+{
+ uint8_t handle = LMP_U8(frm);
+ uint8_t ltaddr = LMP_U8(frm);
+ uint8_t timing = LMP_U8(frm);
+ uint8_t desco = LMP_U8(frm);
+ uint8_t tesco = LMP_U8(frm);
+ uint8_t wesco = LMP_U8(frm);
+ uint8_t mspkt = LMP_U8(frm);
+ uint8_t smpkt = LMP_U8(frm);
+ uint16_t mslen = LMP_U16(frm);
+ uint16_t smlen = LMP_U16(frm);
+ uint8_t airmode = LMP_U8(frm);
+ uint8_t negstate = LMP_U8(frm);
+
+ p_indent(level, frm);
+ printf("eSCO handle %d\n", handle);
+
+ p_indent(level, frm);
+ printf("eSCO LT_ADDR %d\n", ltaddr);
+
+ p_indent(level, frm);
+ printf("timing control flags 0x%2.2x\n", timing);
+
+ p_indent(level, frm);
+ printf("D_eSCO %d T_eSCO %d W_eSCO %d\n", desco, tesco, wesco);
+
+ p_indent(level, frm);
+ printf("eSCO M->S packet type 0x%2.2x length %d\n", mspkt, mslen);
+
+ p_indent(level, frm);
+ printf("eSCO S->M packet type 0x%2.2x length %d\n", smpkt, smlen);
+
+ p_indent(level, frm);
+ printf("air mode 0x%2.2x\n", airmode);
+
+ p_indent(level, frm);
+ printf("negotiation state 0x%2.2x\n", negstate);
+}
+
+static inline void remove_esco_link_req_dump(int level, struct frame *frm)
+{
+ uint8_t handle = LMP_U8(frm);
+ uint8_t error = LMP_U8(frm);
+
+ p_indent(level, frm);
+ printf("eSCO handle %d\n", handle);
+
+ p_indent(level, frm);
+ printf("error code 0x%2.2x\n", error);
+}
+
+static inline void channel_classification_req_dump(int level, struct frame *frm)
+{
+ uint8_t mode = LMP_U8(frm);
+ uint16_t min = LMP_U16(frm);
+ uint16_t max = LMP_U16(frm);
+
+ p_indent(level, frm);
+ printf("AFH reporting mode %d\n", mode);
+
+ p_indent(level, frm);
+ printf("AFH min interval 0x%4.4x\n", min);
+
+ p_indent(level, frm);
+ printf("AFH max interval 0x%4.4x\n", max);
+}
+
+static inline void channel_classification_dump(int level, struct frame *frm)
+{
+ uint8_t *map = frm->ptr;
+ int i;
+
+ frm->ptr += 10;
+ frm->len -= 10;
+
+ p_indent(level, frm);
+ printf("AFH channel classification 0x");
+ for (i = 0; i < 10; i++)
+ printf("%2.2x", map[i]);
+ printf("\n");
+}
+
+static inline void sniff_subrating_dump(int level, struct frame *frm)
+{
+ uint8_t subrate = LMP_U8(frm);
+ uint16_t timeout = LMP_U16(frm);
+ uint32_t instant = LMP_U32(frm);
+
+ p_indent(level, frm);
+ printf("max subrate %d\n", subrate);
+
+ p_indent(level, frm);
+ printf("min sniff timeout %d\n", timeout);
+
+ p_indent(level, frm);
+ printf("subrate instant 0x%4.4x\n", instant);
+}
+
+static inline void io_capability_dump(int level, struct frame *frm)
+{
+ uint8_t capability = LMP_U8(frm);
+ uint8_t oob_data = LMP_U8(frm);
+ uint8_t authentication = LMP_U8(frm);
+
+ p_indent(level, frm);
+ printf("capability 0x%2.2x oob 0x%2.2x auth 0x%2.2x\n",
+ capability, oob_data, authentication);
+}
+
+static inline void keypress_notification_dump(int level, struct frame *frm)
+{
+ uint8_t value = LMP_U8(frm);
+
+ p_indent(level, frm);
+ printf("notification value %d\n", value);
+}
+
+void lmp_dump(int level, struct frame *frm)
+{
+ uint8_t tmp, tid;
+ uint16_t opcode;
+
+ p_indent(level, frm);
+
+ tmp = LMP_U8(frm);
+ tid = tmp & 0x01;
+ opcode = (tmp & 0xfe) >> 1;
+ if (opcode > 123) {
+ tmp = LMP_U8(frm);
+ opcode += tmp << 7;
+ }
+
+ printf("LMP(%c): %s(%c): ", frm->master ? 's' : 'r',
+ opcode2str(opcode), tid ? 's' : 'm');
+
+ if (opcode > 123)
+ printf("op code %d/%d", opcode & 0x7f, opcode >> 7);
+ else
+ printf("op code %d", opcode);
+
+ if (frm->handle > 17)
+ printf(" handle %d\n", frm->handle);
+ else
+ printf("\n");
+
+ if (!(parser.flags & DUMP_VERBOSE)) {
+ raw_dump(level, frm);
+ return;
+ }
+
+ switch (opcode) {
+ case 1:
+ name_req_dump(level + 1, frm);
+ return;
+ case 2:
+ name_res_dump(level + 1, frm);
+ return;
+ case 3:
+ accepted_dump(level + 1, frm);
+ return;
+ case 4:
+ not_accepted_dump(level + 1, frm);
+ return;
+ case 6:
+ clkoffset_dump(level + 1, frm);
+ return;
+ case 7:
+ detach_dump(level + 1, frm);
+ return;
+ case 8:
+ in_rand(frm);
+ random_number_dump(level + 1, frm);
+ return;
+ case 9:
+ comb_key(frm);
+ random_number_dump(level + 1, frm);
+ return;
+ case 11:
+ au_rand(frm);
+ random_number_dump(level + 1, frm);
+ return;
+ case 12:
+ sres(frm);
+ auth_resp_dump(level + 1, frm);
+ return;
+ case 13:
+ case 17:
+ random_number_dump(level + 1, frm);
+ return;
+ case 10:
+ case 14:
+ key_dump(level + 1, frm);
+ return;
+ case 15:
+ encryption_mode_req_dump(level + 1, frm);
+ return;
+ case 16:
+ encryption_key_size_req_dump(level + 1, frm);
+ return;
+ case 19:
+ switch_req_dump(level + 1, frm);
+ return;
+ case 20:
+ case 21:
+ hold_dump(level + 1, frm);
+ return;
+ case 23:
+ sniff_req_dump(level + 1, frm);
+ return;
+ case 25:
+ park_req_dump(level + 1, frm);
+ return;
+ case 28:
+ modify_beacon_dump(level + 1, frm);
+ return;
+ case 31:
+ case 32:
+ power_req_dump(level + 1, frm);
+ return;
+ case 36:
+ preferred_rate_dump(level + 1, frm);
+ return;
+ case 37:
+ case 38:
+ version_dump(level + 1, frm);
+ return;
+ case 39:
+ case 40:
+ features_dump(level + 1, frm);
+ return;
+ case 41:
+ case 42:
+ quality_of_service_dump(level + 1, frm);
+ return;
+ case 43:
+ sco_link_req_dump(level + 1, frm);
+ return;
+ case 44:
+ remove_sco_link_req_dump(level + 1, frm);
+ return;
+ case 45:
+ case 46:
+ max_slots_dump(level + 1, frm);
+ return;
+ case 48:
+ timing_accuracy_dump(level + 1, frm);
+ return;
+ case 52:
+ slot_offset_dump(level + 1, frm);
+ return;
+ case 53:
+ case 54:
+ page_mode_dump(level + 1, frm);
+ return;
+ case 55:
+ supervision_timeout_dump(level + 1, frm);
+ return;
+ case 57:
+ test_control_dump(level + 1, frm);
+ return;
+ case 59:
+ encryption_key_size_mask_res_dump(level + 1, frm);
+ return;
+ case 60:
+ set_afh_dump(level + 1, frm);
+ return;
+ case 61:
+ encapsulated_header_dump(level + 1, frm);
+ return;
+ case 62:
+ encapsulated_payload_dump(level + 1, frm);
+ return;
+ case 63:
+ simple_pairing_confirm_dump(level + 1, frm);
+ return;
+ case 64:
+ simple_pairing_number_dump(level + 1, frm);
+ return;
+ case 65:
+ dhkey_check_dump(level + 1, frm);
+ return;
+ case 5:
+ case 18:
+ case 24:
+ case 33:
+ case 34:
+ case 35:
+ case 47:
+ case 49:
+ case 50:
+ case 51:
+ case 56:
+ case 58:
+ case 127 + (23 << 7):
+ case 127 + (24 << 7):
+ case 127 + (27 << 7):
+ case 127 + (28 << 7):
+ case 127 + (29 << 7):
+ return;
+ case 127 + (1 << 7):
+ accepted_ext_dump(level + 1, frm);
+ return;
+ case 127 + (2 << 7):
+ not_accepted_ext_dump(level + 1, frm);
+ return;
+ case 127 + (3 << 7):
+ case 127 + (4 << 7):
+ features_ext_dump(level + 1, frm);
+ return;
+ case 127 + (11 << 7):
+ packet_type_table_dump(level + 1, frm);
+ return;
+ case 127 + (12 << 7):
+ esco_link_req_dump(level + 1, frm);
+ return;
+ case 127 + (13 << 7):
+ remove_esco_link_req_dump(level + 1, frm);
+ return;
+ case 127 + (16 << 7):
+ channel_classification_req_dump(level + 1, frm);
+ return;
+ case 127 + (17 << 7):
+ channel_classification_dump(level + 1, frm);
+ return;
+ case 127 + (21 << 7):
+ case 127 + (22 << 7):
+ sniff_subrating_dump(level + 1, frm);
+ return;
+ case 127 + (25 << 7):
+ case 127 + (26 << 7):
+ io_capability_dump(level + 1, frm);
+ return;
+ case 127 + (30 << 7):
+ keypress_notification_dump(level + 1, frm);
+ return;
+ }
+
+ raw_dump(level, frm);
+}
--- /dev/null
+/*
+ *
+ * BlueZ - Bluetooth protocol stack for Linux
+ *
+ * Copyright (C) 2004-2007 Marcel Holtmann <marcel@holtmann.org>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include <stdio.h>
+#include <errno.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include <sys/types.h>
+#include <netinet/in.h>
+
+#include "parser.h"
+
+static char *opcode2str(uint8_t opcode)
+{
+ switch (opcode & 0x7f) {
+ case 0x00:
+ return "Connect";
+ case 0x01:
+ return "Disconnect";
+ case 0x02:
+ return "Put";
+ case 0x03:
+ return "Get";
+ case 0x04:
+ return "Reserved";
+ case 0x05:
+ return "SetPath";
+ case 0x06:
+ return "Reserved";
+ case 0x07:
+ return "Session";
+ case 0x7f:
+ return "Abort";
+ case 0x10:
+ return "Continue";
+ case 0x20:
+ return "Success";
+ case 0x21:
+ return "Created";
+ case 0x22:
+ return "Accepted";
+ case 0x23:
+ return "Non-authoritative information";
+ case 0x24:
+ return "No content";
+ case 0x25:
+ return "Reset content";
+ case 0x26:
+ return "Partial content";
+ case 0x30:
+ return "Multiple choices";
+ case 0x31:
+ return "Moved permanently";
+ case 0x32:
+ return "Moved temporarily";
+ case 0x33:
+ return "See other";
+ case 0x34:
+ return "Not modified";
+ case 0x35:
+ return "Use Proxy";
+ case 0x40:
+ return "Bad request";
+ case 0x41:
+ return "Unauthorized";
+ case 0x42:
+ return "Payment required";
+ case 0x43:
+ return "Forbidden";
+ case 0x44:
+ return "Not found";
+ case 0x45:
+ return "Method not allowed";
+ case 0x46:
+ return "Not acceptable";
+ case 0x47:
+ return "Proxy authentication required";
+ case 0x48:
+ return "Request timeout";
+ case 0x49:
+ return "Conflict";
+ case 0x4a:
+ return "Gone";
+ case 0x4b:
+ return "Length required";
+ case 0x4c:
+ return "Precondition failed";
+ case 0x4d:
+ return "Requested entity too large";
+ case 0x4e:
+ return "Requested URL too large";
+ case 0x4f:
+ return "Unsupported media type";
+ case 0x50:
+ return "Internal server error";
+ case 0x51:
+ return "Not implemented";
+ case 0x52:
+ return "Bad gateway";
+ case 0x53:
+ return "Service unavailable";
+ case 0x54:
+ return "Gateway timeout";
+ case 0x55:
+ return "HTTP version not supported";
+ case 0x60:
+ return "Database full";
+ case 0x61:
+ return "Database locked";
+ default:
+ return "Unknown";
+ }
+}
+
+static char *hi2str(uint8_t hi)
+{
+ switch (hi & 0x3f) {
+ case 0x00:
+ return "Count";
+ case 0x01:
+ return "Name";
+ case 0x02:
+ return "Type";
+ case 0x03:
+ return "Length";
+ case 0x04:
+ return "Time";
+ case 0x05:
+ return "Description";
+ case 0x06:
+ return "Target";
+ case 0x07:
+ return "HTTP";
+ case 0x08:
+ return "Body";
+ case 0x09:
+ return "End of Body";
+ case 0x0a:
+ return "Who";
+ case 0x0b:
+ return "Connection ID";
+ case 0x0c:
+ return "App. Parameters";
+ case 0x0d:
+ return "Auth. Challenge";
+ case 0x0e:
+ return "Auth. Response";
+ case 0x0f:
+ return "Creator ID";
+ case 0x10:
+ return "WAN UUID";
+ case 0x11:
+ return "Object Class";
+ case 0x12:
+ return "Session Parameters";
+ case 0x13:
+ return "Session Sequence Number";
+ default:
+ return "Unknown";
+ }
+}
+
+static void parse_headers(int level, struct frame *frm)
+{
+ uint8_t hi, hv8;
+ uint16_t len;
+ uint32_t hv32;
+
+ while (frm->len > 0) {
+ hi = get_u8(frm);
+
+ p_indent(level, frm);
+
+ printf("%s (0x%02x)", hi2str(hi), hi);
+ switch (hi & 0xc0) {
+ case 0x00: /* Unicode */
+ len = get_u16(frm) - 3;
+ printf(" = Unicode length %d\n", len);
+ raw_ndump(level, frm, len);
+ frm->ptr += len;
+ frm->len -= len;
+ break;
+
+ case 0x40: /* Byte sequence */
+ len = get_u16(frm) - 3;
+ printf(" = Sequence length %d\n", len);
+ raw_ndump(level, frm, len);
+ frm->ptr += len;
+ frm->len -= len;
+ break;
+
+ case 0x80: /* One byte */
+ hv8 = get_u8(frm);
+ printf(" = %d\n", hv8);
+ break;
+
+ case 0xc0: /* Four bytes */
+ hv32 = get_u32(frm);
+ printf(" = %u\n", hv32);
+ break;
+ }
+ }
+}
+
+void obex_dump(int level, struct frame *frm)
+{
+ uint8_t last_opcode, opcode, status;
+ uint8_t version, flags, constants;
+ uint16_t length, pktlen;
+
+ frm = add_frame(frm);
+
+ while (frm->len > 0) {
+ opcode = get_u8(frm);
+ length = get_u16(frm);
+ status = opcode & 0x7f;
+
+ if (frm->len < length - 3) {
+ frm->ptr -= 3;
+ frm->len += 3;
+ return;
+ }
+
+ p_indent(level, frm);
+
+ last_opcode = get_opcode(frm->handle, frm->dlci);
+
+ if (!(opcode & 0x70)) {
+ printf("OBEX: %s cmd(%c): len %d",
+ opcode2str(opcode),
+ opcode & 0x80 ? 'f' : 'c', length);
+ set_opcode(frm->handle, frm->dlci, opcode);
+ } else {
+ printf("OBEX: %s rsp(%c): status %x%02d len %d",
+ opcode2str(last_opcode),
+ opcode & 0x80 ? 'f' : 'c',
+ status >> 4, status & 0xf, length);
+ opcode = last_opcode;
+ }
+
+ if (get_status(frm->handle, frm->dlci) == 0x10)
+ printf(" (continue)");
+
+ set_status(frm->handle, frm->dlci, status);
+
+ if (frm->len == 0) {
+ printf("\n");
+ break;
+ }
+
+ switch (opcode & 0x7f) {
+ case 0x00: /* Connect */
+ version = get_u8(frm);
+ flags = get_u8(frm);
+ pktlen = get_u16(frm);
+ printf(" version %d.%d flags %d mtu %d\n",
+ version >> 4, version & 0xf, flags, pktlen);
+ break;
+
+ case 0x05: /* SetPath */
+ if (length > 3) {
+ flags = get_u8(frm);
+ constants = get_u8(frm);
+ printf(" flags %d constants %d\n",
+ flags, constants);
+ } else
+ printf("\n");
+ break;
+
+ default:
+ printf("\n");
+ }
+
+ if ((status & 0x70) && (parser.flags & DUMP_VERBOSE)) {
+ p_indent(level, frm);
+ printf("Status %x%02d = %s\n",
+ status >> 4, status & 0xf,
+ opcode2str(status));
+ }
+
+ parse_headers(level, frm);
+ }
+}
--- /dev/null
+/*
+ *
+ * BlueZ - Bluetooth protocol stack for Linux
+ *
+ * Copyright (C) 2000-2002 Maxim Krasnyansky <maxk@qualcomm.com>
+ * Copyright (C) 2003-2007 Marcel Holtmann <marcel@holtmann.org>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include <stdio.h>
+#include <errno.h>
+#include <ctype.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include <sys/types.h>
+#include <netinet/in.h>
+
+#include "parser.h"
+#include "rfcomm.h"
+
+struct parser_t parser;
+
+void init_parser(unsigned long flags, unsigned long filter,
+ unsigned short defpsm, unsigned short defcompid,
+ int pppdump_fd, int audio_fd)
+{
+ if ((flags & DUMP_RAW) && !(flags & DUMP_TYPE_MASK))
+ flags |= DUMP_HEX;
+
+ parser.flags = flags;
+ parser.filter = filter;
+ parser.defpsm = defpsm;
+ parser.defcompid = defcompid;
+ parser.state = 0;
+ parser.pppdump_fd = pppdump_fd;
+ parser.audio_fd = audio_fd;
+}
+
+#define PROTO_TABLE_SIZE 20
+
+static struct {
+ uint16_t handle;
+ uint16_t psm;
+ uint8_t channel;
+ uint32_t proto;
+} proto_table[PROTO_TABLE_SIZE];
+
+void set_proto(uint16_t handle, uint16_t psm, uint8_t channel, uint32_t proto)
+{
+ int i, pos = -1;
+
+ if (psm > 0 && psm < 0x1000 && !channel)
+ return;
+
+ if (!psm && channel)
+ psm = RFCOMM_PSM;
+
+ for (i = 0; i < PROTO_TABLE_SIZE; i++) {
+ if (proto_table[i].handle == handle && proto_table[i].psm == psm && proto_table[i].channel == channel) {
+ pos = i;
+ break;
+ }
+
+ if (pos < 0 && !proto_table[i].handle && !proto_table[i].psm && !proto_table[i].channel)
+ pos = i;
+ }
+
+ if (pos < 0)
+ return;
+
+ proto_table[pos].handle = handle;
+ proto_table[pos].psm = psm;
+ proto_table[pos].channel = channel;
+ proto_table[pos].proto = proto;
+}
+
+uint32_t get_proto(uint16_t handle, uint16_t psm, uint8_t channel)
+{
+ int i, pos = -1;
+
+ if (!psm && channel)
+ psm = RFCOMM_PSM;
+
+ for (i = 0; i < PROTO_TABLE_SIZE; i++) {
+ if (proto_table[i].handle == handle && proto_table[i].psm == psm && proto_table[i].channel == channel)
+ return proto_table[i].proto;
+
+ if (!proto_table[i].handle) {
+ if (proto_table[i].psm == psm && proto_table[i].channel == channel)
+ pos = i;
+ }
+ }
+
+ return (pos < 0) ? 0 : proto_table[pos].proto;
+}
+
+#define FRAME_TABLE_SIZE 20
+
+static struct {
+ uint16_t handle;
+ uint8_t dlci;
+ uint8_t opcode;
+ uint8_t status;
+ struct frame frm;
+} frame_table[FRAME_TABLE_SIZE];
+
+void del_frame(uint16_t handle, uint8_t dlci)
+{
+ int i;
+
+ for (i = 0; i < FRAME_TABLE_SIZE; i++)
+ if (frame_table[i].handle == handle &&
+ frame_table[i].dlci == dlci) {
+ frame_table[i].handle = 0;
+ frame_table[i].dlci = 0;
+ frame_table[i].opcode = 0;
+ frame_table[i].status = 0;
+ if (frame_table[i].frm.data)
+ free(frame_table[i].frm.data);
+ memset(&frame_table[i].frm, 0, sizeof(struct frame));
+ break;
+ }
+}
+
+struct frame *add_frame(struct frame *frm)
+{
+ struct frame *fr;
+ void *data;
+ int i, pos = -1;
+
+ for (i = 0; i < FRAME_TABLE_SIZE; i++) {
+ if (frame_table[i].handle == frm->handle &&
+ frame_table[i].dlci == frm->dlci) {
+ pos = i;
+ break;
+ }
+
+ if (pos < 0 && !frame_table[i].handle && !frame_table[i].dlci)
+ pos = i;
+ }
+
+ if (pos < 0)
+ return frm;
+
+ frame_table[pos].handle = frm->handle;
+ frame_table[pos].dlci = frm->dlci;
+ fr = &frame_table[pos].frm;
+
+ data = malloc(fr->len + frm->len);
+ if (!data) {
+ perror("Can't allocate frame stream buffer");
+ del_frame(frm->handle, frm->dlci);
+ return frm;
+ }
+
+ if (fr->len > 0)
+ memcpy(data, fr->ptr, fr->len);
+
+ if (frm->len > 0)
+ memcpy(data + fr->len, frm->ptr, frm->len);
+
+ if (fr->data)
+ free(fr->data);
+
+ fr->data = data;
+ fr->data_len = fr->len + frm->len;
+ fr->len = fr->data_len;
+ fr->ptr = fr->data;
+ fr->dev_id = frm->dev_id;
+ fr->in = frm->in;
+ fr->ts = frm->ts;
+ fr->handle = frm->handle;
+ fr->cid = frm->cid;
+ fr->num = frm->num;
+ fr->dlci = frm->dlci;
+ fr->channel = frm->channel;
+ fr->pppdump_fd = frm->pppdump_fd;
+ fr->audio_fd = frm->audio_fd;
+
+ return fr;
+}
+
+uint8_t get_opcode(uint16_t handle, uint8_t dlci)
+{
+ int i;
+
+ for (i = 0; i < FRAME_TABLE_SIZE; i++)
+ if (frame_table[i].handle == handle &&
+ frame_table[i].dlci == dlci)
+ return frame_table[i].opcode;
+
+ return 0x00;
+}
+
+void set_opcode(uint16_t handle, uint8_t dlci, uint8_t opcode)
+{
+ int i;
+
+ for (i = 0; i < FRAME_TABLE_SIZE; i++)
+ if (frame_table[i].handle == handle &&
+ frame_table[i].dlci == dlci) {
+ frame_table[i].opcode = opcode;
+ break;
+ }
+}
+
+uint8_t get_status(uint16_t handle, uint8_t dlci)
+{
+ int i;
+
+ for (i = 0; i < FRAME_TABLE_SIZE; i++)
+ if (frame_table[i].handle == handle &&
+ frame_table[i].dlci == dlci)
+ return frame_table[i].status;
+
+ return 0x00;
+}
+
+void set_status(uint16_t handle, uint8_t dlci, uint8_t status)
+{
+ int i;
+
+ for (i = 0; i < FRAME_TABLE_SIZE; i++)
+ if (frame_table[i].handle == handle &&
+ frame_table[i].dlci == dlci) {
+ frame_table[i].status = status;
+ break;
+ }
+}
+
+void ascii_dump(int level, struct frame *frm, int num)
+{
+ unsigned char *buf = frm->ptr;
+ register int i, n;
+
+ if ((num < 0) || (num > frm->len))
+ num = frm->len;
+
+ for (i = 0, n = 1; i < num; i++, n++) {
+ if (n == 1)
+ p_indent(level, frm);
+ printf("%1c ", isprint(buf[i]) ? buf[i] : '.');
+ if (n == DUMP_WIDTH) {
+ printf("\n");
+ n = 0;
+ }
+ }
+ if (i && n != 1)
+ printf("\n");
+}
+
+void hex_dump(int level, struct frame *frm, int num)
+{
+ unsigned char *buf = frm->ptr;
+ register int i, n;
+
+ if ((num < 0) || (num > frm->len))
+ num = frm->len;
+
+ for (i = 0, n = 1; i < num; i++, n++) {
+ if (n == 1)
+ p_indent(level, frm);
+ printf("%2.2X ", buf[i]);
+ if (n == DUMP_WIDTH) {
+ printf("\n");
+ n = 0;
+ }
+ }
+ if (i && n != 1)
+ printf("\n");
+}
+
+void ext_dump(int level, struct frame *frm, int num)
+{
+ unsigned char *buf = frm->ptr;
+ register int i, n = 0, size;
+
+ if ((num < 0) || (num > frm->len))
+ num = frm->len;
+
+ while (num > 0) {
+ p_indent(level, frm);
+ printf("%04x: ", n);
+
+ size = num > 16 ? 16 : num;
+
+ for (i = 0; i < size; i++)
+ printf("%02x%s", buf[i], (i + 1) % 8 ? " " : " ");
+ for (i = size; i < 16; i++)
+ printf(" %s", (i + 1) % 8 ? " " : " ");
+
+ for (i = 0; i < size; i++)
+ printf("%1c", isprint(buf[i]) ? buf[i] : '.');
+ printf("\n");
+
+ buf += size;
+ num -= size;
+ n += size;
+ }
+}
+
+void raw_ndump(int level, struct frame *frm, int num)
+{
+ if (!frm->len)
+ return;
+
+ switch (parser.flags & DUMP_TYPE_MASK) {
+ case DUMP_ASCII:
+ ascii_dump(level, frm, num);
+ break;
+
+ case DUMP_HEX:
+ hex_dump(level, frm, num);
+ break;
+
+ case DUMP_EXT:
+ ext_dump(level, frm, num);
+ break;
+ }
+}
+
+void raw_dump(int level, struct frame *frm)
+{
+ raw_ndump(level, frm, -1);
+}
--- /dev/null
+/*
+ *
+ * BlueZ - Bluetooth protocol stack for Linux
+ *
+ * Copyright (C) 2000-2002 Maxim Krasnyansky <maxk@qualcomm.com>
+ * Copyright (C) 2003-2007 Marcel Holtmann <marcel@holtmann.org>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifndef __PARSER_H
+#define __PARSER_H
+
+#include <time.h>
+#include <sys/time.h>
+#include <bluetooth/bluetooth.h>
+#include <netinet/in.h>
+
+struct frame {
+ void *data;
+ uint32_t data_len;
+ void *ptr;
+ uint32_t len;
+ uint16_t dev_id;
+ uint8_t in;
+ uint8_t master;
+ uint16_t handle;
+ uint16_t cid;
+ uint16_t num;
+ uint8_t dlci;
+ uint8_t channel;
+ unsigned long flags;
+ struct timeval ts;
+ int pppdump_fd;
+ int audio_fd;
+};
+
+/* Parser flags */
+#define DUMP_WIDTH 20
+
+#define DUMP_ASCII 0x0001
+#define DUMP_HEX 0x0002
+#define DUMP_EXT 0x0004
+#define DUMP_RAW 0x0008
+#define DUMP_BPA 0x0010
+#define DUMP_TSTAMP 0x0100
+#define DUMP_VERBOSE 0x0200
+#define DUMP_BTSNOOP 0x1000
+#define DUMP_PKTLOG 0x2000
+#define DUMP_NOVENDOR 0x4000
+#define DUMP_TYPE_MASK (DUMP_ASCII | DUMP_HEX | DUMP_EXT)
+
+/* Parser filter */
+#define FILT_LMP 0x0001
+#define FILT_HCI 0x0002
+#define FILT_SCO 0x0004
+#define FILT_L2CAP 0x0008
+#define FILT_RFCOMM 0x0010
+#define FILT_SDP 0x0020
+#define FILT_BNEP 0x0040
+#define FILT_CMTP 0x0080
+#define FILT_HIDP 0x0100
+#define FILT_HCRP 0x0200
+#define FILT_AVDTP 0x0400
+#define FILT_AVCTP 0x0800
+
+#define FILT_OBEX 0x00010000
+#define FILT_CAPI 0x00020000
+#define FILT_PPP 0x00040000
+#define FILT_ERICSSON 0x10000000
+#define FILT_CSR 0x1000000a
+#define FILT_DGA 0x1000000c
+
+#define STRUCT_OFFSET(type, member) ((uint8_t *)&(((type *)NULL)->member) - \
+ (uint8_t *)((type *)NULL))
+
+#define STRUCT_END(type, member) (STRUCT_OFFSET(type, member) + \
+ sizeof(((type *)NULL)->member))
+
+#define DEFAULT_COMPID 65535
+
+struct parser_t {
+ unsigned long flags;
+ unsigned long filter;
+ unsigned short defpsm;
+ unsigned short defcompid;
+ int state;
+ int pppdump_fd;
+ int audio_fd;
+};
+
+extern struct parser_t parser;
+
+void init_parser(unsigned long flags, unsigned long filter,
+ unsigned short defpsm, unsigned short defcompid,
+ int pppdump_fd, int audio_fd);
+
+static inline int p_filter(unsigned long f)
+{
+ return !(parser.filter & f);
+}
+
+static inline void p_indent(int level, struct frame *f)
+{
+ if (level < 0) {
+ parser.state = 0;
+ return;
+ }
+
+ if (!parser.state) {
+ if (parser.flags & DUMP_TSTAMP) {
+ if (parser.flags & DUMP_VERBOSE) {
+ struct tm tm;
+ time_t t = f->ts.tv_sec;
+ localtime_r(&t, &tm);
+ printf("%04d-%02d-%02d %02d:%02d:%02d.%06lu ",
+ tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday,
+ tm.tm_hour, tm.tm_min, tm.tm_sec, f->ts.tv_usec);
+ } else
+ printf("%8lu.%06lu ", f->ts.tv_sec, f->ts.tv_usec);
+ }
+ printf("%c ", (f->in ? '>' : '<'));
+ parser.state = 1;
+ } else
+ printf(" ");
+
+ if (level)
+ printf("%*c", (level*2), ' ');
+}
+
+static inline void p_ba2str(const bdaddr_t *ba, char *str)
+{
+ if (parser.flags & DUMP_NOVENDOR) {
+ uint8_t b[6];
+
+ baswap((bdaddr_t *) b, ba);
+ sprintf(str, "%2.2X:%2.2X:%2.2X:*:*:*", b[0], b[1], b[2]);
+ } else
+ ba2str(ba, str);
+}
+
+/* get_uXX functions do byte swaping */
+
+static inline uint8_t get_u8(struct frame *frm)
+{
+ uint8_t *u8_ptr = frm->ptr;
+ frm->ptr += 1;
+ frm->len -= 1;
+ return *u8_ptr;
+}
+
+static inline uint16_t get_u16(struct frame *frm)
+{
+ uint16_t *u16_ptr = frm->ptr;
+ frm->ptr += 2;
+ frm->len -= 2;
+ return ntohs(bt_get_unaligned(u16_ptr));
+}
+
+static inline uint32_t get_u32(struct frame *frm)
+{
+ uint32_t *u32_ptr = frm->ptr;
+ frm->ptr += 4;
+ frm->len -= 4;
+ return ntohl(bt_get_unaligned(u32_ptr));
+}
+
+static inline uint64_t get_u64(struct frame *frm)
+{
+ uint64_t *u64_ptr = frm->ptr;
+ uint64_t u64 = bt_get_unaligned(u64_ptr), tmp;
+ frm->ptr += 8;
+ frm->len -= 8;
+ tmp = ntohl(u64 & 0xffffffff);
+ u64 = (tmp << 32) | ntohl(u64 >> 32);
+ return u64;
+}
+
+static inline void get_u128(struct frame *frm, uint64_t *l, uint64_t *h)
+{
+ *h = get_u64(frm);
+ *l = get_u64(frm);
+}
+
+char *get_uuid_name(int uuid);
+
+void set_proto(uint16_t handle, uint16_t psm, uint8_t channel, uint32_t proto);
+uint32_t get_proto(uint16_t handle, uint16_t psm, uint8_t channel);
+
+struct frame *add_frame(struct frame *frm);
+void del_frame(uint16_t handle, uint8_t dlci);
+
+uint8_t get_opcode(uint16_t handle, uint8_t dlci);
+void set_opcode(uint16_t handle, uint8_t dlci, uint8_t opcode);
+
+uint8_t get_status(uint16_t handle, uint8_t dlci);
+void set_status(uint16_t handle, uint8_t dlci, uint8_t status);
+
+void l2cap_clear(uint16_t handle);
+
+void ascii_dump(int level, struct frame *frm, int num);
+void hex_dump(int level, struct frame *frm, int num);
+void ext_dump(int level, struct frame *frm, int num);
+void raw_dump(int level, struct frame *frm);
+void raw_ndump(int level, struct frame *frm, int num);
+
+void lmp_dump(int level, struct frame *frm);
+void hci_dump(int level, struct frame *frm);
+void l2cap_dump(int level, struct frame *frm);
+void rfcomm_dump(int level, struct frame *frm);
+void sdp_dump(int level, struct frame *frm);
+void bnep_dump(int level, struct frame *frm);
+void cmtp_dump(int level, struct frame *frm);
+void hidp_dump(int level, struct frame *frm);
+void hcrp_dump(int level, struct frame *frm);
+void avdtp_dump(int level, struct frame *frm);
+void avctp_dump(int level, struct frame *frm);
+
+void obex_dump(int level, struct frame *frm);
+void capi_dump(int level, struct frame *frm);
+void ppp_dump(int level, struct frame *frm);
+void arp_dump(int level, struct frame *frm);
+void ip_dump(int level, struct frame *frm);
+void ericsson_dump(int level, struct frame *frm);
+void csr_dump(int level, struct frame *frm);
+void bpa_dump(int level, struct frame *frm);
+
+static inline void parse(struct frame *frm)
+{
+ p_indent(-1, NULL);
+ if (parser.flags & DUMP_RAW)
+ raw_dump(0, frm);
+ else
+ hci_dump(0, frm);
+ fflush(stdout);
+}
+
+#endif /* __PARSER_H */
--- /dev/null
+/*
+ *
+ * BlueZ - Bluetooth protocol stack for Linux
+ *
+ * Copyright (C) 2004-2007 Marcel Holtmann <marcel@holtmann.org>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include <stdio.h>
+#include <errno.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/types.h>
+
+#include "parser.h"
+
+#define PPP_U8(frm) (get_u8(frm))
+#define PPP_U16(frm) (btohs(htons(get_u16(frm))))
+#define PPP_U32(frm) (btohl(htonl(get_u32(frm))))
+
+static int ppp_traffic = 0;
+
+static unsigned char ppp_magic1[] = { 0x7e, 0xff, 0x03, 0xc0, 0x21 };
+static unsigned char ppp_magic2[] = { 0x7e, 0xff, 0x7d, 0x23, 0xc0, 0x21 };
+static unsigned char ppp_magic3[] = { 0x7e, 0x7d, 0xdf, 0x7d, 0x23, 0xc0, 0x21 };
+
+static inline int check_for_ppp_traffic(unsigned char *data, int size)
+{
+ int i;
+
+ for (i = 0; i < size - sizeof(ppp_magic1); i++)
+ if (!memcmp(data + i, ppp_magic1, sizeof(ppp_magic1))) {
+ ppp_traffic = 1;
+ return i;
+ }
+
+ for (i = 0; i < size - sizeof(ppp_magic2); i++)
+ if (!memcmp(data + i, ppp_magic2, sizeof(ppp_magic2))) {
+ ppp_traffic = 1;
+ return i;
+ }
+
+ for (i = 0; i < size - sizeof(ppp_magic3); i++)
+ if (!memcmp(data + i, ppp_magic3, sizeof(ppp_magic3))) {
+ ppp_traffic = 1;
+ return i;
+ }
+
+ return -1;
+}
+
+static inline char *dir2str(uint8_t in)
+{
+ return in ? "DCE" : "DTE";
+}
+
+static inline char *proto2str(uint16_t proto)
+{
+ switch (proto) {
+ case 0x0001:
+ return "Padding Protocol";
+ case 0x0021:
+ return "IP";
+ case 0x8021:
+ return "IP Control Protocol";
+ case 0x80fd:
+ return "Compression Control Protocol";
+ case 0xc021:
+ return "Link Control Protocol";
+ case 0xc023:
+ return "Password Authentication Protocol";
+ case 0xc025:
+ return "Link Quality Report";
+ case 0xc223:
+ return "Challenge Handshake Authentication Protocol";
+ default:
+ return "Unknown Protocol";
+ }
+}
+
+static void hdlc_dump(int level, struct frame *frm)
+{
+ uint8_t addr = get_u8(frm);
+ uint8_t ctrl = get_u8(frm);
+ uint16_t fcs, proto;
+
+ fcs = bt_get_unaligned((uint16_t *) (frm->ptr + frm->len - 2));
+ frm->len -= 2;
+
+ p_indent(level, frm);
+
+ if (addr != 0xff || ctrl != 0x03) {
+ frm->ptr -= 2;
+ frm->len += 2;
+ printf("HDLC: %s: len %d fcs 0x%04x\n",
+ dir2str(frm->in), frm->len, fcs);
+ } else
+ printf("HDLC: %s: addr 0x%02x ctrl 0x%02x len %d fcs 0x%04x\n",
+ dir2str(frm->in), addr, ctrl, frm->len, fcs);
+
+ if (*((uint8_t *) frm->ptr) & 0x80)
+ proto = get_u16(frm);
+ else
+ proto = get_u8(frm);
+
+ p_indent(level + 1, frm);
+ printf("PPP: %s (0x%04x): len %d\n", proto2str(proto), proto, frm->len);
+
+ raw_dump(level + 1, frm);
+}
+
+static inline void unslip_frame(int level, struct frame *frm, int len)
+{
+ struct frame msg;
+ unsigned char *data, *ptr;
+ int i, p = 0;
+
+ data = malloc(len * 2);
+ if (!data)
+ return;
+
+ ptr = frm->ptr;
+
+ for (i = 0; i < len; i++) {
+ if (ptr[i] == 0x7d) {
+ data[p++] = ptr[i + 1] ^ 0x20;
+ i++;
+ } else
+ data[p++] = ptr[i];
+ }
+
+ memset(&msg, 0, sizeof(msg));
+ msg.data = data;
+ msg.data_len = len * 2;
+ msg.ptr = msg.data;
+ msg.len = p;
+ msg.in = frm->in;
+ msg.ts = frm->ts;
+ msg.handle = frm->handle;
+ msg.cid = frm->cid;
+
+ hdlc_dump(level, &msg);
+
+ free(data);
+}
+
+void ppp_dump(int level, struct frame *frm)
+{
+ void *ptr, *end;
+ int err, len, pos = 0;
+
+ if (frm->pppdump_fd > fileno(stderr)) {
+ unsigned char id;
+ uint16_t len = htons(frm->len);
+ uint32_t ts = htonl(frm->ts.tv_sec & 0xffffffff);
+
+ id = 0x07;
+ err = write(frm->pppdump_fd, &id, 1);
+ err = write(frm->pppdump_fd, &ts, 4);
+
+ id = frm->in ? 0x02 : 0x01;
+ err = write(frm->pppdump_fd, &id, 1);
+ err = write(frm->pppdump_fd, &len, 2);
+ err = write(frm->pppdump_fd, frm->ptr, frm->len);
+ }
+
+ if (!ppp_traffic) {
+ pos = check_for_ppp_traffic(frm->ptr, frm->len);
+ if (pos < 0) {
+ raw_dump(level, frm);
+ return;
+ }
+
+ if (pos > 0) {
+ raw_ndump(level, frm, pos);
+ frm->ptr += pos;
+ frm->len -= pos;
+ }
+ }
+
+ frm = add_frame(frm);
+
+ while (frm->len > 0) {
+ ptr = memchr(frm->ptr, 0x7e, frm->len);
+ if (!ptr)
+ break;
+
+ if (frm->ptr != ptr) {
+ frm->len -= (ptr - frm->ptr);
+ frm->ptr = ptr;
+ }
+
+ end = memchr(frm->ptr + 1, 0x7e, frm->len - 1);
+ if (!end)
+ break;
+
+ len = end - ptr - 1;
+
+ frm->ptr++;
+ frm->len--;
+
+ if (len > 0) {
+ unslip_frame(level, frm, len);
+
+ frm->ptr += len;
+ frm->len -= len;
+ }
+ }
+}
--- /dev/null
+/*
+ *
+ * BlueZ - Bluetooth protocol stack for Linux
+ *
+ * Copyright (C) 2001-2002 Wayne Lee <waynelee@qualcomm.com>
+ * Copyright (C) 2003-2007 Marcel Holtmann <marcel@holtmann.org>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include <stdio.h>
+#include <errno.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <netinet/in.h>
+
+#include <bluetooth/bluetooth.h>
+
+#include "parser.h"
+#include "rfcomm.h"
+#include "sdp.h"
+
+static char *cr_str[] = {
+ "RSP",
+ "CMD"
+};
+
+#define CR_STR(mcc_head) cr_str[mcc_head->type.cr]
+#define GET_DLCI(addr) ((addr.server_chn << 1) | (addr.d & 1))
+
+static void print_rfcomm_hdr(long_frame_head* head, uint8_t *ptr, int len)
+{
+ address_field addr = head->addr;
+ uint8_t ctr = head->control;
+ uint16_t ilen = head->length.bits.len;
+ uint8_t ctr_type,pf,dlci,fcs;
+
+ dlci = GET_DLCI(addr);
+ pf = GET_PF(ctr);
+ ctr_type = CLR_PF(ctr);
+ fcs = *(ptr + len - 1);
+
+ printf("cr %d dlci %d pf %d ilen %d fcs 0x%x ", addr.cr, dlci, pf, ilen, fcs);
+}
+
+static void print_mcc(mcc_long_frame_head* mcc_head)
+{
+ printf("mcc_len %d\n", mcc_head->length.bits.len);
+}
+
+static inline void mcc_test(int level, uint8_t *ptr, int len,
+ long_frame_head *head, mcc_long_frame_head *mcc_head)
+{
+ printf("TEST %s: ", CR_STR(mcc_head));
+ print_rfcomm_hdr(head, ptr, len);
+ print_mcc(mcc_head);
+}
+static inline void mcc_fcon(int level, uint8_t *ptr, int len,
+ long_frame_head *head, mcc_long_frame_head *mcc_head)
+{
+ printf("FCON %s: ", CR_STR(mcc_head));
+ print_rfcomm_hdr(head, ptr, len);
+ print_mcc(mcc_head);
+}
+
+static inline void mcc_fcoff(int level, uint8_t *ptr, int len,
+ long_frame_head *head, mcc_long_frame_head *mcc_head)
+{
+ printf("FCOFF %s: ", CR_STR(mcc_head));
+ print_rfcomm_hdr(head, ptr, len);
+ print_mcc(mcc_head);
+}
+
+static inline void mcc_msc(int level, uint8_t *ptr, int len,
+ long_frame_head *head, mcc_long_frame_head *mcc_head)
+{
+ msc_msg *msc = (void*) (ptr - STRUCT_END(msc_msg, mcc_s_head));
+
+ printf("MSC %s: ", CR_STR(mcc_head));
+ print_rfcomm_hdr(head, ptr, len);
+ print_mcc(mcc_head);
+ p_indent(level, 0);
+ printf("dlci %d fc %d rtc %d rtr %d ic %d dv %d",
+ GET_DLCI(msc->dlci), msc->v24_sigs.fc, msc->v24_sigs.rtc,
+ msc->v24_sigs.rtr, msc->v24_sigs.ic, msc->v24_sigs.dv );
+
+ /* Assuming that break_signals field is _not declared_ in struct msc_msg... */
+ if (len > STRUCT_OFFSET(msc_msg, fcs) - STRUCT_END(msc_msg, v24_sigs)) {
+ break_signals *brk = (break_signals *)
+ (ptr + STRUCT_END(msc_msg, v24_sigs));
+ printf(" b1 %d b2 %d b3 %d len %d\n",
+ brk->b1, brk->b2, brk->b3, brk->len);
+ } else
+ printf("\n");
+}
+
+static inline void mcc_rpn(int level, uint8_t *ptr, int len,
+ long_frame_head *head, mcc_long_frame_head *mcc_head)
+{
+ rpn_msg *rpn = (void *) (ptr - STRUCT_END(rpn_msg, mcc_s_head));
+
+ printf("RPN %s: ", CR_STR(mcc_head));
+ print_rfcomm_hdr(head, ptr, len);
+ print_mcc(mcc_head);
+
+ p_indent(level, 0);
+ printf("dlci %d ", GET_DLCI(rpn->dlci));
+
+ /* Assuming that rpn_val is _declared_ as a member of rpn_msg... */
+ if (len <= STRUCT_OFFSET(rpn_msg, rpn_val) - STRUCT_END(rpn_msg, mcc_s_head)) {
+ printf("\n");
+ return;
+ }
+
+ printf("br %d db %d sb %d p %d pt %d xi %d xo %d\n",
+ rpn->rpn_val.bit_rate, rpn->rpn_val.data_bits,
+ rpn->rpn_val.stop_bit, rpn->rpn_val.parity,
+ rpn->rpn_val.parity_type, rpn->rpn_val.xon_input,
+ rpn->rpn_val.xon_output);
+
+ p_indent(level, 0);
+ printf("rtri %d rtro %d rtci %d rtco %d xon %d xoff %d pm 0x%04x\n",
+ rpn->rpn_val.rtr_input, rpn->rpn_val.rtr_output,
+ rpn->rpn_val.rtc_input, rpn->rpn_val.rtc_output,
+ rpn->rpn_val.xon, rpn->rpn_val.xoff, btohs(rpn->rpn_val.pm));
+}
+
+static inline void mcc_rls(int level, uint8_t *ptr, int len,
+ long_frame_head *head, mcc_long_frame_head *mcc_head)
+{
+ rls_msg* rls = (void*) (ptr - STRUCT_END(rls_msg, mcc_s_head));
+
+ printf("RLS %s: ", CR_STR(mcc_head));
+ print_rfcomm_hdr(head, ptr, len);
+ print_mcc(mcc_head);
+ printf("dlci %d error: %d", GET_DLCI(rls->dlci), rls->error);
+}
+
+static inline void mcc_pn(int level, uint8_t *ptr, int len,
+ long_frame_head *head, mcc_long_frame_head *mcc_head)
+{
+ pn_msg *pn = (void*) (ptr - STRUCT_END(pn_msg, mcc_s_head));
+
+ printf("PN %s: ", CR_STR(mcc_head));
+ print_rfcomm_hdr(head, ptr, len);
+ print_mcc(mcc_head);
+
+ p_indent(level, 0);
+ printf("dlci %d frame_type %d credit_flow %d pri %d ack_timer %d\n",
+ pn->dlci, pn->frame_type, pn->credit_flow, pn->prior, pn->ack_timer);
+ p_indent(level, 0);
+ printf("frame_size %d max_retrans %d credits %d\n",
+ btohs(pn->frame_size), pn->max_nbrof_retrans, pn->credits);
+}
+
+static inline void mcc_nsc(int level, uint8_t *ptr, int len,
+ long_frame_head *head, mcc_long_frame_head *mcc_head)
+{
+
+ nsc_msg *nsc = (void*) (ptr - STRUCT_END(nsc_msg, mcc_s_head));
+
+ printf("NSC %s: ", CR_STR(mcc_head));
+ print_rfcomm_hdr(head, ptr, len);
+ print_mcc(mcc_head);
+
+ p_indent(level, 0);
+ printf("cr %d, mcc_cmd_type %x\n",
+ nsc->command_type.cr, nsc->command_type.type );
+}
+
+static inline void mcc_frame(int level, struct frame *frm, long_frame_head *head)
+{
+ mcc_short_frame_head *mcc_short_head_p = frm->ptr;
+ mcc_long_frame_head mcc_head;
+ uint8_t hdr_size;
+
+ if ( mcc_short_head_p->length.ea == EA ) {
+ mcc_head.type = mcc_short_head_p->type;
+ mcc_head.length.bits.len = mcc_short_head_p->length.len;
+ hdr_size = sizeof(mcc_short_frame_head);
+ } else {
+ mcc_head = *(mcc_long_frame_head *)frm->ptr;
+ mcc_head.length.val = btohs(mcc_head.length.val);
+ hdr_size = sizeof(mcc_long_frame_head);
+ }
+
+ frm->ptr += hdr_size;
+ frm->len -= hdr_size;
+
+ p_indent(level, frm);
+ printf("RFCOMM(s): ");
+
+ switch (mcc_head.type.type) {
+ case TEST:
+ mcc_test(level, frm->ptr, frm->len, head, &mcc_head);
+ raw_dump(level, frm);
+ break;
+ case FCON:
+ mcc_fcon(level, frm->ptr, frm->len, head, &mcc_head);
+ break;
+ case FCOFF:
+ mcc_fcoff(level, frm->ptr, frm->len, head, &mcc_head);
+ break;
+ case MSC:
+ mcc_msc(level, frm->ptr, frm->len, head, &mcc_head);
+ break;
+ case RPN:
+ mcc_rpn(level, frm->ptr, frm->len, head, &mcc_head);
+ break;
+ case RLS:
+ mcc_rls(level, frm->ptr, frm->len, head, &mcc_head);
+ break;
+ case PN:
+ mcc_pn(level, frm->ptr, frm->len, head, &mcc_head);
+ break;
+ case NSC:
+ mcc_nsc(level, frm->ptr, frm->len, head, &mcc_head);
+ break;
+ default:
+ printf("MCC message type 0x%02x: ", mcc_head.type.type);
+ print_rfcomm_hdr(head, frm->ptr, frm->len);
+ printf("\n");
+
+ frm->len--;
+ raw_dump(level, frm);
+ }
+}
+
+static inline void uih_frame(int level, struct frame *frm, long_frame_head *head)
+{
+ uint32_t proto;
+
+ if (!head->addr.server_chn) {
+ mcc_frame(level, frm, head);
+ } else {
+ p_indent(level, frm);
+ printf("RFCOMM(d): UIH: ");
+ print_rfcomm_hdr(head, frm->ptr, frm->len);
+ if (GET_PF(head->control)) {
+ printf("credits %d\n", *(uint8_t *)(frm->ptr));
+ frm->ptr++;
+ frm->len--;
+ } else
+ printf("\n");
+
+ frm->len--;
+ frm->dlci = GET_DLCI(head->addr);
+ frm->channel = head->addr.server_chn;
+
+ proto = get_proto(frm->handle, RFCOMM_PSM, frm->channel);
+
+ if (frm->len > 0) {
+ switch (proto) {
+ case SDP_UUID_OBEX:
+ if (!p_filter(FILT_OBEX))
+ obex_dump(level + 1, frm);
+ else
+ raw_dump(level, frm);
+ break;
+
+ case SDP_UUID_LAN_ACCESS_PPP:
+ case SDP_UUID_DIALUP_NETWORKING:
+ if (!p_filter(FILT_PPP))
+ ppp_dump(level + 1, frm);
+ else
+ raw_dump(level, frm);
+ break;
+
+ default:
+ if (p_filter(FILT_RFCOMM))
+ break;
+
+ raw_dump(level, frm);
+ break;
+ }
+ }
+ }
+}
+
+void rfcomm_dump(int level, struct frame *frm)
+{
+ uint8_t hdr_size, ctr_type;
+ short_frame_head *short_head_p = (void *) frm->ptr;
+ long_frame_head head;
+
+ if (short_head_p->length.ea == EA) {
+ head.addr = short_head_p->addr;
+ head.control = short_head_p->control;
+ head.length.bits.len = short_head_p->length.len;
+ hdr_size = sizeof(short_frame_head);
+ } else {
+ head = *(long_frame_head *) frm->ptr;
+ head.length.val = btohs(head.length.val);
+ hdr_size = sizeof(long_frame_head);
+ }
+
+ frm->ptr += hdr_size;
+ frm->len -= hdr_size;
+
+ ctr_type = CLR_PF(head.control);
+
+ if (ctr_type == UIH) {
+ uih_frame(level, frm, &head);
+ } else {
+ p_indent(level, frm);
+ printf("RFCOMM(s): ");
+
+ switch (ctr_type) {
+ case SABM:
+ printf("SABM: ");
+ break;
+ case UA:
+ printf("UA: ");
+ break;
+ case DM:
+ printf("DM: ");
+ break;
+ case DISC:
+ printf("DISC: ");
+ del_frame(frm->handle, GET_DLCI(head.addr));
+ break;
+ default:
+ printf("ERR: ");
+ }
+ print_rfcomm_hdr(&head, frm->ptr, frm->len);
+ printf("\n");
+ }
+}
--- /dev/null
+/*
+ *
+ * BlueZ - Bluetooth protocol stack for Linux
+ *
+ * Copyright (C) 2001-2002 Wayne Lee <waynelee@qualcomm.com>
+ * Copyright (C) 2003-2007 Marcel Holtmann <marcel@holtmann.org>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifndef __RFCOMM_H
+#define __RFCOMM_H
+
+#include <endian.h>
+
+#define RFCOMM_PSM 3
+
+#define TRUE 1
+#define FALSE 0
+
+#define RFCOMM_MAX_CONN 10
+#define BT_NBR_DATAPORTS RFCOMM_MAX_CONN
+
+#define GET_BIT(pos,bitfield) ((bitfield[(pos)/32]) & (1 << ((pos) % 32)))
+#define SET_BIT(pos,bitfield) ((bitfield[(pos)/32]) |= (1 << ((pos) % 32)))
+#define CLR_BIT(pos,bitfield) ((bitfield[(pos)/32]) &= ((1 << ((pos) % 32)) ^ (~0)))
+
+/* Sets the P/F-bit in the control field */
+#define SET_PF(ctr) ((ctr) | (1 << 4))
+/* Clears the P/F-bit in the control field */
+#define CLR_PF(ctr) ((ctr) & 0xef)
+/* Returns the P/F-bit */
+#define GET_PF(ctr) (((ctr) >> 4) & 0x1)
+
+#define MIN(a, b) (((a) < (b)) ? (a) : (b))
+
+/* Endian-swapping macros for structs */
+#define swap_long_frame(x) ((x)->h.length.val = le16_to_cpu((x)->h.length.val))
+#define swap_mcc_long_frame(x) (swap_long_frame(x))
+
+/* Used for UIH packets */
+#define SHORT_CRC_CHECK 2
+/* Used for all packet exepts for the UIH packets */
+#define LONG_CRC_CHECK 3
+/* Short header for short UIH packets */
+#define SHORT_HDR 2
+/* Long header for long UIH packets */
+#define LONG_HDR 3
+
+/* FIXME: Should this one be defined here? */
+#define SHORT_PAYLOAD_SIZE 127
+/* Used for setting the EA field in different packets, really neccessary? */
+#define EA 1
+/* Yes the FCS size is only one byte */
+#define FCS_SIZE 1
+
+#define RFCOMM_MAX_HDR_SIZE 5
+
+#define MAX_CREDITS 30
+#define START_CREDITS 7
+#define MIN_CREDITS 6
+
+#define DEF_RFCOMM_MTU 127
+
+/* The values in the control field when sending ordinary rfcomm packets */
+#define SABM 0x2f /* set asynchronous balanced mode */
+#define UA 0x63 /* unnumbered acknolodgement */
+#define DM 0x0f /* disconnected mode */
+#define DISC 0x43 /* disconnect */
+#define UIH 0xef /* unnumbered information with header check (only) */
+#define UI 0x03 /* unnumbered information (with all data check) */
+
+#define SABM_SIZE 4
+#define UA_SIZE 4
+
+/* The values in the type field in a multiplexer command packet */
+#define PN (0x80 >> 2) /* parameter negotiation */
+#define PSC (0x40 >> 2) /* power saving control */
+#define CLD (0xc0 >> 2) /* close down */
+#define TEST (0x20 >> 2) /* test */
+#define FCON (0xa0 >> 2) /* flow control on */
+#define FCOFF (0x60 >> 2) /* flow control off */
+#define MSC (0xe0 >> 2) /* modem status command */
+#define NSC (0x10 >> 2) /* not supported command response */
+#define RPN (0x90 >> 2) /* remote port negotiation */
+#define RLS (0x50 >> 2) /* remote line status */
+#define SNC (0xd0 >> 2) /* service negotiation command */
+
+/* Define of some V.24 signals modem control signals in RFCOMM */
+#define DV 0x80 /* data valid */
+#define IC 0x40 /* incoming call */
+#define RTR 0x08 /* ready to receive */
+#define RTC 0x04 /* ready to communicate */
+#define FC 0x02 /* flow control (unable to accept frames) */
+
+#define CTRL_CHAN 0 /* The control channel is defined as DLCI 0 in rfcomm */
+#define MCC_CMD 1 /* Multiplexer command */
+#define MCC_RSP 0 /* Multiplexer response */
+
+#if __BYTE_ORDER == __LITTLE_ENDIAN
+
+typedef struct parameter_mask {
+ uint8_t bit_rate:1;
+ uint8_t data_bits:1;
+ uint8_t stop_bit:1;
+ uint8_t parity:1;
+ uint8_t parity_type:1;
+ uint8_t xon:1;
+ uint8_t xoff:1;
+ uint8_t res1:1;
+ uint8_t xon_input:1;
+ uint8_t xon_output:1;
+ uint8_t rtr_input:1;
+ uint8_t rtr_output:1;
+ uint8_t rtc_input:1;
+ uint8_t rtc_output:1;
+ uint8_t res2:2;
+} __attribute__ ((packed)) parameter_mask;
+
+typedef struct rpn_values {
+ uint8_t bit_rate;
+ uint8_t data_bits:2;
+ uint8_t stop_bit:1;
+ uint8_t parity:1;
+ uint8_t parity_type:2;
+ uint8_t res1:2;
+ uint8_t xon_input:1;
+ uint8_t xon_output:1;
+ uint8_t rtr_input:1;
+ uint8_t rtr_output:1;
+ uint8_t rtc_input:1;
+ uint8_t rtc_output:1;
+ uint8_t res2:2;
+ uint8_t xon;
+ uint8_t xoff;
+ uint16_t pm;
+ //parameter_mask pm;
+} __attribute__ ((packed)) rpn_values;
+
+#elif __BYTE_ORDER == __BIG_ENDIAN
+
+typedef struct parameter_mask {
+ uint8_t res1:1;
+ uint8_t xoff:1;
+ uint8_t xon:1;
+ uint8_t parity_type:1;
+ uint8_t parity:1;
+ uint8_t stop_bit:1;
+ uint8_t data_bits:1;
+ uint8_t bit_rate:1;
+ uint8_t res2:2;
+ uint8_t rtc_output:1;
+ uint8_t rtc_input:1;
+ uint8_t rtr_output:1;
+ uint8_t rtr_input:1;
+ uint8_t xon_output:1;
+ uint8_t xon_input:1;
+
+} __attribute__ ((packed)) parameter_mask;
+
+typedef struct rpn_values {
+ uint8_t bit_rate;
+ uint8_t res1:2;
+ uint8_t parity_type:2;
+ uint8_t parity:1;
+ uint8_t stop_bit:1;
+ uint8_t data_bits:2;
+ uint8_t res2:2;
+ uint8_t rtc_output:1;
+ uint8_t rtc_input:1;
+ uint8_t rtr_output:1;
+ uint8_t rtr_input:1;
+ uint8_t xon_output:1;
+ uint8_t xon_input:1;
+ uint8_t xon;
+ uint8_t xoff;
+ uint16_t pm;
+ //parameter_mask pm;
+} __attribute__ ((packed)) rpn_values;
+
+#else
+#error "Unknown byte order"
+#endif
+
+/* Typedefinitions of stuctures used for creating and parsing packets, for a
+ * further description of the structures please se the bluetooth core
+ * specification part F:1 and the ETSI TS 07.10 specification */
+
+#if __BYTE_ORDER == __LITTLE_ENDIAN
+
+typedef struct address_field {
+ uint8_t ea:1;
+ uint8_t cr:1;
+ uint8_t d:1;
+ uint8_t server_chn:5;
+} __attribute__ ((packed)) address_field;
+
+typedef struct short_length {
+ uint8_t ea:1;
+ uint8_t len:7;
+} __attribute__ ((packed)) short_length;
+
+typedef union long_length {
+ struct bits {
+ uint8_t ea:1;
+ unsigned short len:15;
+ } __attribute__ ((packed)) bits ;
+ uint16_t val ;
+} __attribute__ ((packed)) long_length;
+
+typedef struct short_frame_head {
+ address_field addr;
+ uint8_t control;
+ short_length length;
+} __attribute__ ((packed)) short_frame_head;
+
+typedef struct short_frame {
+ short_frame_head h;
+ uint8_t data[0];
+} __attribute__ ((packed)) short_frame;
+
+typedef struct long_frame_head {
+ address_field addr;
+ uint8_t control;
+ long_length length;
+ uint8_t data[0];
+} __attribute__ ((packed)) long_frame_head;
+
+typedef struct long_frame {
+ long_frame_head h;
+ uint8_t data[0];
+} __attribute__ ((packed)) long_frame;
+
+/* Typedefinitions for structures used for the multiplexer commands */
+typedef struct mcc_type {
+ uint8_t ea:1;
+ uint8_t cr:1;
+ uint8_t type:6;
+} __attribute__ ((packed)) mcc_type;
+
+typedef struct mcc_short_frame_head {
+ mcc_type type;
+ short_length length;
+ uint8_t value[0];
+} __attribute__ ((packed)) mcc_short_frame_head;
+
+typedef struct mcc_short_frame {
+ mcc_short_frame_head h;
+ uint8_t value[0];
+} __attribute__ ((packed)) mcc_short_frame;
+
+typedef struct mcc_long_frame_head {
+ mcc_type type;
+ long_length length;
+ uint8_t value[0];
+} __attribute__ ((packed)) mcc_long_frame_head;
+
+typedef struct mcc_long_frame {
+ mcc_long_frame_head h;
+ uint8_t value[0];
+} __attribute__ ((packed)) mcc_long_frame;
+
+/* MSC-command */
+typedef struct v24_signals {
+ uint8_t ea:1;
+ uint8_t fc:1;
+ uint8_t rtc:1;
+ uint8_t rtr:1;
+ uint8_t reserved:2;
+ uint8_t ic:1;
+ uint8_t dv:1;
+} __attribute__ ((packed)) v24_signals;
+
+typedef struct break_signals {
+ uint8_t ea:1;
+ uint8_t b1:1;
+ uint8_t b2:1;
+ uint8_t b3:1;
+ uint8_t len:4;
+} __attribute__ ((packed)) break_signals;
+
+typedef struct msc_msg {
+ short_frame_head s_head;
+ mcc_short_frame_head mcc_s_head;
+ address_field dlci;
+ v24_signals v24_sigs;
+ //break_signals break_sigs;
+ uint8_t fcs;
+} __attribute__ ((packed)) msc_msg;
+
+typedef struct rpn_msg {
+ short_frame_head s_head;
+ mcc_short_frame_head mcc_s_head;
+ address_field dlci;
+ rpn_values rpn_val;
+ uint8_t fcs;
+} __attribute__ ((packed)) rpn_msg;
+
+/* RLS-command */
+typedef struct rls_msg {
+ short_frame_head s_head;
+ mcc_short_frame_head mcc_s_head;
+ address_field dlci;
+ uint8_t error:4;
+ uint8_t res:4;
+ uint8_t fcs;
+} __attribute__ ((packed)) rls_msg;
+
+/* PN-command */
+typedef struct pn_msg {
+ short_frame_head s_head;
+ mcc_short_frame_head mcc_s_head;
+/* The res1, res2 and res3 values have to be set to 0 by the sender */
+ uint8_t dlci:6;
+ uint8_t res1:2;
+ uint8_t frame_type:4;
+ uint8_t credit_flow:4;
+ uint8_t prior:6;
+ uint8_t res2:2;
+ uint8_t ack_timer;
+ uint16_t frame_size:16;
+ uint8_t max_nbrof_retrans;
+ uint8_t credits;
+ uint8_t fcs;
+} __attribute__ ((packed)) pn_msg;
+
+/* NSC-command */
+typedef struct nsc_msg {
+ short_frame_head s_head;
+ mcc_short_frame_head mcc_s_head;
+ mcc_type command_type;
+ uint8_t fcs;
+} __attribute__ ((packed)) nsc_msg;
+
+#elif __BYTE_ORDER == __BIG_ENDIAN
+
+typedef struct address_field {
+ uint8_t server_chn:5;
+ uint8_t d:1;
+ uint8_t cr:1;
+ uint8_t ea:1;
+} __attribute__ ((packed)) address_field;
+
+typedef struct short_length {
+ uint8_t len:7;
+ uint8_t ea:1;
+} __attribute__ ((packed)) short_length;
+
+typedef union long_length {
+ struct bits {
+ unsigned short len:15;
+ uint8_t ea:1;
+ } __attribute__ ((packed)) bits;
+ uint16_t val;
+} __attribute__ ((packed)) long_length;
+
+typedef struct short_frame_head {
+ address_field addr;
+ uint8_t control;
+ short_length length;
+} __attribute__ ((packed)) short_frame_head;
+
+typedef struct short_frame {
+ short_frame_head h;
+ uint8_t data[0];
+} __attribute__ ((packed)) short_frame;
+
+typedef struct long_frame_head {
+ address_field addr;
+ uint8_t control;
+ long_length length;
+ uint8_t data[0];
+} __attribute__ ((packed)) long_frame_head;
+
+typedef struct long_frame {
+ long_frame_head h;
+ uint8_t data[0];
+} __attribute__ ((packed)) long_frame;
+
+typedef struct mcc_type {
+ uint8_t type:6;
+ uint8_t cr:1;
+ uint8_t ea:1;
+} __attribute__ ((packed)) mcc_type;
+
+typedef struct mcc_short_frame_head {
+ mcc_type type;
+ short_length length;
+ uint8_t value[0];
+} __attribute__ ((packed)) mcc_short_frame_head;
+
+typedef struct mcc_short_frame {
+ mcc_short_frame_head h;
+ uint8_t value[0];
+} __attribute__ ((packed)) mcc_short_frame;
+
+typedef struct mcc_long_frame_head {
+ mcc_type type;
+ long_length length;
+ uint8_t value[0];
+} __attribute__ ((packed)) mcc_long_frame_head;
+
+typedef struct mcc_long_frame {
+ mcc_long_frame_head h;
+ uint8_t value[0];
+} __attribute__ ((packed)) mcc_long_frame;
+
+typedef struct v24_signals {
+ uint8_t dv:1;
+ uint8_t ic:1;
+ uint8_t reserved:2;
+ uint8_t rtr:1;
+ uint8_t rtc:1;
+ uint8_t fc:1;
+ uint8_t ea:1;
+} __attribute__ ((packed)) v24_signals;
+
+typedef struct break_signals {
+ uint8_t len:4;
+ uint8_t b3:1;
+ uint8_t b2:1;
+ uint8_t b1:1;
+ uint8_t ea:1;
+} __attribute__ ((packed)) break_signals;
+
+typedef struct msc_msg {
+ short_frame_head s_head;
+ mcc_short_frame_head mcc_s_head;
+ address_field dlci;
+ v24_signals v24_sigs;
+ //break_signals break_sigs;
+ uint8_t fcs;
+} __attribute__ ((packed)) msc_msg;
+
+typedef struct rpn_msg {
+ short_frame_head s_head;
+ mcc_short_frame_head mcc_s_head;
+ address_field dlci;
+ rpn_values rpn_val;
+ uint8_t fcs;
+} __attribute__ ((packed)) rpn_msg;
+
+typedef struct rls_msg {
+ short_frame_head s_head;
+ mcc_short_frame_head mcc_s_head;
+ address_field dlci;
+ uint8_t res:4;
+ uint8_t error:4;
+ uint8_t fcs;
+} __attribute__ ((packed)) rls_msg;
+
+typedef struct pn_msg {
+ short_frame_head s_head;
+ mcc_short_frame_head mcc_s_head;
+ uint8_t res1:2;
+ uint8_t dlci:6;
+ uint8_t credit_flow:4;
+ uint8_t frame_type:4;
+ uint8_t res2:2;
+ uint8_t prior:6;
+ uint8_t ack_timer;
+ uint16_t frame_size:16;
+ uint8_t max_nbrof_retrans;
+ uint8_t credits;
+ uint8_t fcs;
+} __attribute__ ((packed)) pn_msg;
+
+typedef struct nsc_msg {
+ short_frame_head s_head;
+ mcc_short_frame_head mcc_s_head;
+ mcc_type command_type;
+ uint8_t fcs;
+} __attribute__ ((packed)) nsc_msg;
+
+#else
+#error "Unknown byte order"
+#error Processor endianness unknown!
+#endif
+
+#endif /* __RFCOMM_H */
--- /dev/null
+/*
+ *
+ * BlueZ - Bluetooth protocol stack for Linux
+ *
+ * Copyright (C) 2001-2002 Ricky Yuen <ryuen@qualcomm.com>
+ * Copyright (C) 2003-2007 Marcel Holtmann <marcel@holtmann.org>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include <stdio.h>
+#include <errno.h>
+#include <ctype.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include <sys/types.h>
+#include <netinet/in.h>
+
+#include "parser.h"
+#include "sdp.h"
+
+#define SDP_ERROR_RSP 0x01
+#define SDP_SERVICE_SEARCH_REQ 0x02
+#define SDP_SERVICE_SEARCH_RSP 0x03
+#define SDP_SERVICE_ATTR_REQ 0x04
+#define SDP_SERVICE_ATTR_RSP 0x05
+#define SDP_SERVICE_SEARCH_ATTR_REQ 0x06
+#define SDP_SERVICE_SEARCH_ATTR_RSP 0x07
+
+typedef struct {
+ uint8_t pid;
+ uint16_t tid;
+ uint16_t len;
+} __attribute__ ((packed)) sdp_pdu_hdr;
+#define SDP_PDU_HDR_SIZE 5
+
+/* Data element type descriptor */
+#define SDP_DE_NULL 0
+#define SDP_DE_UINT 1
+#define SDP_DE_INT 2
+#define SDP_DE_UUID 3
+#define SDP_DE_STRING 4
+#define SDP_DE_BOOL 5
+#define SDP_DE_SEQ 6
+#define SDP_DE_ALT 7
+#define SDP_DE_URL 8
+
+/* Data element size index lookup table */
+typedef struct {
+ int addl_bits;
+ int num_bytes;
+} sdp_siz_idx_lookup_table_t;
+
+static sdp_siz_idx_lookup_table_t sdp_siz_idx_lookup_table[] = {
+ { 0, 1 }, /* Size index = 0 */
+ { 0, 2 }, /* 1 */
+ { 0, 4 }, /* 2 */
+ { 0, 8 }, /* 3 */
+ { 0, 16 }, /* 4 */
+ { 1, 1 }, /* 5 */
+ { 1, 2 }, /* 6 */
+ { 1, 4 }, /* 7 */
+};
+
+/* UUID name lookup table */
+typedef struct {
+ int uuid;
+ char* name;
+} sdp_uuid_nam_lookup_table_t;
+
+static sdp_uuid_nam_lookup_table_t sdp_uuid_nam_lookup_table[] = {
+ { SDP_UUID_SDP, "SDP" },
+ { SDP_UUID_UDP, "UDP" },
+ { SDP_UUID_RFCOMM, "RFCOMM" },
+ { SDP_UUID_TCP, "TCP" },
+ { SDP_UUID_TCS_BIN, "TCS-BIN" },
+ { SDP_UUID_TCS_AT, "TCS-AT" },
+ { SDP_UUID_OBEX, "OBEX" },
+ { SDP_UUID_IP, "IP" },
+ { SDP_UUID_FTP, "FTP" },
+ { SDP_UUID_HTTP, "HTTP" },
+ { SDP_UUID_WSP, "WSP" },
+ { SDP_UUID_L2CAP, "L2CAP" },
+ { SDP_UUID_BNEP, "BNEP" }, /* PAN */
+ { SDP_UUID_HIDP, "HIDP" }, /* HID */
+ { SDP_UUID_AVCTP, "AVCTP" }, /* AVCTP */
+ { SDP_UUID_AVDTP, "AVDTP" }, /* AVDTP */
+ { SDP_UUID_CMTP, "CMTP" }, /* CIP */
+ { SDP_UUID_UDI_C_PLANE, "UDI_C-Plane" }, /* UDI */
+ { SDP_UUID_SERVICE_DISCOVERY_SERVER, "SDServer" },
+ { SDP_UUID_BROWSE_GROUP_DESCRIPTOR, "BrwsGrpDesc" },
+ { SDP_UUID_PUBLIC_BROWSE_GROUP, "PubBrwsGrp" },
+ { SDP_UUID_SERIAL_PORT, "SP" },
+ { SDP_UUID_LAN_ACCESS_PPP, "LAN" },
+ { SDP_UUID_DIALUP_NETWORKING, "DUN" },
+ { SDP_UUID_IR_MC_SYNC, "IRMCSync" },
+ { SDP_UUID_OBEX_OBJECT_PUSH, "OBEXObjPush" },
+ { SDP_UUID_OBEX_FILE_TRANSFER, "OBEXObjTrnsf" },
+ { SDP_UUID_IR_MC_SYNC_COMMAND, "IRMCSyncCmd" },
+ { SDP_UUID_HEADSET, "Headset" },
+ { SDP_UUID_CORDLESS_TELEPHONY, "CordlessTel" },
+ { SDP_UUID_AUDIO_SOURCE, "AudioSource" }, /* A2DP */
+ { SDP_UUID_AUDIO_SINK, "AudioSink" }, /* A2DP */
+ { SDP_UUID_AV_REMOTE_TARGET, "AVRemTarget" }, /* AVRCP */
+ { SDP_UUID_ADVANCED_AUDIO, "AdvAudio" }, /* A2DP */
+ { SDP_UUID_AV_REMOTE, "AVRemote" }, /* AVRCP */
+ { SDP_UUID_VIDEO_CONFERENCING, "VideoConf" }, /* VCP */
+ { SDP_UUID_INTERCOM, "Intercom" },
+ { SDP_UUID_FAX, "Fax" },
+ { SDP_UUID_HEADSET_AUDIO_GATEWAY, "Headset AG" },
+ { SDP_UUID_WAP, "WAP" },
+ { SDP_UUID_WAP_CLIENT, "WAP Client" },
+ { SDP_UUID_PANU, "PANU" }, /* PAN */
+ { SDP_UUID_NAP, "NAP" }, /* PAN */
+ { SDP_UUID_GN, "GN" }, /* PAN */
+ { SDP_UUID_DIRECT_PRINTING, "DirectPrint" }, /* BPP */
+ { SDP_UUID_REFERENCE_PRINTING, "RefPrint" }, /* BPP */
+ { SDP_UUID_IMAGING, "Imaging" }, /* BIP */
+ { SDP_UUID_IMAGING_RESPONDER, "ImagingResp" }, /* BIP */
+ { SDP_UUID_HANDSFREE, "Handsfree" },
+ { SDP_UUID_HANDSFREE_AUDIO_GATEWAY, "Handsfree AG" },
+ { SDP_UUID_DIRECT_PRINTING_REF_OBJS, "RefObjsPrint" }, /* BPP */
+ { SDP_UUID_REFLECTED_UI, "ReflectedUI" }, /* BPP */
+ { SDP_UUID_BASIC_PRINTING, "BasicPrint" }, /* BPP */
+ { SDP_UUID_PRINTING_STATUS, "PrintStatus" }, /* BPP */
+ { SDP_UUID_HUMAN_INTERFACE_DEVICE, "HID" }, /* HID */
+ { SDP_UUID_HARDCOPY_CABLE_REPLACE, "HCRP" }, /* HCRP */
+ { SDP_UUID_HCR_PRINT, "HCRPrint" }, /* HCRP */
+ { SDP_UUID_HCR_SCAN, "HCRScan" }, /* HCRP */
+ { SDP_UUID_COMMON_ISDN_ACCESS, "CIP" }, /* CIP */
+ { SDP_UUID_VIDEO_CONFERENCING_GW, "VideoConf GW" }, /* VCP */
+ { SDP_UUID_UDI_MT, "UDI MT" }, /* UDI */
+ { SDP_UUID_UDI_TA, "UDI TA" }, /* UDI */
+ { SDP_UUID_AUDIO_VIDEO, "AudioVideo" }, /* VCP */
+ { SDP_UUID_SIM_ACCESS, "SAP" }, /* SAP */
+ { SDP_UUID_PHONEBOOK_ACCESS_PCE, "PBAP PCE" }, /* PBAP */
+ { SDP_UUID_PHONEBOOK_ACCESS_PSE, "PBAP PSE" }, /* PBAP */
+ { SDP_UUID_PHONEBOOK_ACCESS, "PBAP" }, /* PBAP */
+ { SDP_UUID_PNP_INFORMATION, "PNPInfo" },
+ { SDP_UUID_GENERIC_NETWORKING, "Networking" },
+ { SDP_UUID_GENERIC_FILE_TRANSFER, "FileTrnsf" },
+ { SDP_UUID_GENERIC_AUDIO, "Audio" },
+ { SDP_UUID_GENERIC_TELEPHONY, "Telephony" },
+ { SDP_UUID_UPNP_SERVICE, "UPNP" }, /* ESDP */
+ { SDP_UUID_UPNP_IP_SERVICE, "UPNP IP" }, /* ESDP */
+ { SDP_UUID_ESDP_UPNP_IP_PAN, "UPNP PAN" }, /* ESDP */
+ { SDP_UUID_ESDP_UPNP_IP_LAP, "UPNP LAP" }, /* ESDP */
+ { SDP_UUID_ESDP_UPNP_L2CAP, "UPNP L2CAP" }, /* ESDP */
+ { SDP_UUID_VIDEO_SOURCE, "VideoSource" }, /* VDP */
+ { SDP_UUID_VIDEO_SINK, "VideoSink" }, /* VDP */
+ { SDP_UUID_VIDEO_DISTRIBUTION, "VideoDist" }, /* VDP */
+ { SDP_UUID_APPLE_AGENT, "AppleAgent" },
+};
+
+#define SDP_UUID_NAM_LOOKUP_TABLE_SIZE \
+ (sizeof(sdp_uuid_nam_lookup_table)/sizeof(sdp_uuid_nam_lookup_table_t))
+
+/* AttrID name lookup table */
+typedef struct {
+ int attr_id;
+ char* name;
+} sdp_attr_id_nam_lookup_table_t;
+
+static sdp_attr_id_nam_lookup_table_t sdp_attr_id_nam_lookup_table[] = {
+ { SDP_ATTR_ID_SERVICE_RECORD_HANDLE, "SrvRecHndl" },
+ { SDP_ATTR_ID_SERVICE_CLASS_ID_LIST, "SrvClassIDList" },
+ { SDP_ATTR_ID_SERVICE_RECORD_STATE, "SrvRecState" },
+ { SDP_ATTR_ID_SERVICE_SERVICE_ID, "SrvID" },
+ { SDP_ATTR_ID_PROTOCOL_DESCRIPTOR_LIST, "ProtocolDescList" },
+ { SDP_ATTR_ID_BROWSE_GROUP_LIST, "BrwGrpList" },
+ { SDP_ATTR_ID_LANGUAGE_BASE_ATTRIBUTE_ID_LIST, "LangBaseAttrIDList" },
+ { SDP_ATTR_ID_SERVICE_INFO_TIME_TO_LIVE, "SrvInfoTimeToLive" },
+ { SDP_ATTR_ID_SERVICE_AVAILABILITY, "SrvAvail" },
+ { SDP_ATTR_ID_BLUETOOTH_PROFILE_DESCRIPTOR_LIST, "BTProfileDescList" },
+ { SDP_ATTR_ID_DOCUMENTATION_URL, "DocURL" },
+ { SDP_ATTR_ID_CLIENT_EXECUTABLE_URL, "ClientExeURL" },
+ { SDP_ATTR_ID_ICON_10, "Icon10" },
+ { SDP_ATTR_ID_ICON_URL, "IconURL" },
+ { SDP_ATTR_ID_SERVICE_NAME, "SrvName" },
+ { SDP_ATTR_ID_SERVICE_DESCRIPTION, "SrvDesc" },
+ { SDP_ATTR_ID_PROVIDER_NAME, "ProviderName" },
+ { SDP_ATTR_ID_VERSION_NUMBER_LIST, "VersionNumList" },
+ { SDP_ATTR_ID_GROUP_ID, "GrpID" },
+ { SDP_ATTR_ID_SERVICE_DATABASE_STATE, "SrvDBState" },
+ { SDP_ATTR_ID_SERVICE_VERSION, "SrvVersion" },
+ { SDP_ATTR_ID_SECURITY_DESCRIPTION, "SecurityDescription"}, /* PAN */
+ { SDP_ATTR_ID_SUPPORTED_DATA_STORES_LIST, "SuppDataStoresList" }, /* Synchronization */
+ { SDP_ATTR_ID_SUPPORTED_FORMATS_LIST, "SuppFormatsList" }, /* OBEX Object Push */
+ { SDP_ATTR_ID_NET_ACCESS_TYPE, "NetAccessType" }, /* PAN */
+ { SDP_ATTR_ID_MAX_NET_ACCESS_RATE, "MaxNetAccessRate" }, /* PAN */
+ { SDP_ATTR_ID_IPV4_SUBNET, "IPv4Subnet" }, /* PAN */
+ { SDP_ATTR_ID_IPV6_SUBNET, "IPv6Subnet" }, /* PAN */
+ { SDP_ATTR_ID_SUPPORTED_CAPABILITIES, "SuppCapabilities" }, /* Imaging */
+ { SDP_ATTR_ID_SUPPORTED_FEATURES, "SuppFeatures" }, /* Imaging and Hansfree */
+ { SDP_ATTR_ID_SUPPORTED_FUNCTIONS, "SuppFunctions" }, /* Imaging */
+ { SDP_ATTR_ID_TOTAL_IMAGING_DATA_CAPACITY, "SuppTotalCapacity" }, /* Imaging */
+ { SDP_ATTR_ID_SUPPORTED_REPOSITORIES, "SuppRepositories" }, /* PBAP */
+};
+
+#define SDP_ATTR_ID_NAM_LOOKUP_TABLE_SIZE \
+ (sizeof(sdp_attr_id_nam_lookup_table)/sizeof(sdp_attr_id_nam_lookup_table_t))
+
+char* get_uuid_name(int uuid)
+{
+ int i;
+
+ for (i = 0; i < SDP_UUID_NAM_LOOKUP_TABLE_SIZE; i++) {
+ if (sdp_uuid_nam_lookup_table[i].uuid == uuid)
+ return sdp_uuid_nam_lookup_table[i].name;
+ }
+
+ return 0;
+}
+
+static inline char* get_attr_id_name(int attr_id)
+{
+ int i;
+
+ for (i = 0; i < SDP_ATTR_ID_NAM_LOOKUP_TABLE_SIZE; i++)
+ if (sdp_attr_id_nam_lookup_table[i].attr_id == attr_id)
+ return sdp_attr_id_nam_lookup_table[i].name;
+ return 0;
+}
+
+static inline uint8_t parse_de_hdr(struct frame *frm, int *n)
+{
+ uint8_t de_hdr = get_u8(frm);
+ uint8_t de_type = de_hdr >> 3;
+ uint8_t siz_idx = de_hdr & 0x07;
+
+ /* Get the number of bytes */
+ if (sdp_siz_idx_lookup_table[siz_idx].addl_bits) {
+ switch(sdp_siz_idx_lookup_table[siz_idx].num_bytes) {
+ case 1:
+ *n = get_u8(frm); break;
+ case 2:
+ *n = get_u16(frm); break;
+ case 4:
+ *n = get_u32(frm); break;
+ case 8:
+ *n = get_u64(frm); break;
+ }
+ } else
+ *n = sdp_siz_idx_lookup_table[siz_idx].num_bytes;
+
+ return de_type;
+}
+
+static inline void print_int(uint8_t de_type, int level, int n, struct frame *frm, uint16_t *psm, uint8_t *channel)
+{
+ uint64_t val, val2;
+
+ switch(de_type) {
+ case SDP_DE_UINT:
+ printf(" uint");
+ break;
+ case SDP_DE_INT:
+ printf(" int");
+ break;
+ case SDP_DE_BOOL:
+ printf(" bool");
+ break;
+ }
+
+ switch(n) {
+ case 1: /* 8-bit */
+ val = get_u8(frm);
+ if (channel && de_type == SDP_DE_UINT)
+ if (*channel == 0)
+ *channel = val;
+ break;
+ case 2: /* 16-bit */
+ val = get_u16(frm);
+ if (psm && de_type == SDP_DE_UINT)
+ if (*psm == 0)
+ *psm = val;
+ break;
+ case 4: /* 32-bit */
+ val = get_u32(frm);
+ break;
+ case 8: /* 64-bit */
+ val = get_u64(frm);
+ break;
+ case 16:/* 128-bit */
+ get_u128(frm, &val, &val2);
+ printf(" 0x%jx", val2);
+ if (val < 0x1000000000000000LL)
+ printf("0");
+ printf("%jx", val);
+ return;
+ default: /* syntax error */
+ printf(" err");
+ frm->ptr += n;
+ frm->len -= n;
+ return;
+ }
+
+ printf(" 0x%jx", val);
+}
+
+static inline void print_uuid(int n, struct frame *frm, uint16_t *psm, uint8_t *channel)
+{
+ uint32_t uuid = 0;
+ char* s;
+ int i;
+
+ switch(n) {
+ case 2: /* 16-bit UUID */
+ uuid = get_u16(frm);
+ s = "uuid-16";
+ break;
+ case 4: /* 32_bit UUID */
+ uuid = get_u32(frm);
+ s = "uuid-32";
+ break;
+ case 16: /* 128-bit UUID */
+ printf(" uuid-128 ");
+ for (i = 0; i < 16; i++) {
+ printf("%02x", ((unsigned char *) frm->ptr)[i]);
+ if (i == 3 || i == 5 || i == 7 || i == 9)
+ printf("-");
+ }
+ frm->ptr += 16;
+ frm->len -= 16;
+ return;
+ default: /* syntax error */
+ printf(" *err*");
+ frm->ptr += n;
+ frm->len -= n;
+ return;
+ }
+
+ if (psm && *psm > 0 && *psm != 0xffff) {
+ set_proto(frm->handle, *psm, 0, uuid);
+ *psm = 0xffff;
+ }
+
+ if (channel && *channel > 0 && *channel != 0xff) {
+ set_proto(frm->handle, *psm, *channel, uuid);
+ *channel = 0xff;
+ }
+
+ printf(" %s 0x%04x", s, uuid);
+ if ((s = get_uuid_name(uuid)))
+ printf(" (%s)", s);
+}
+
+static inline void print_string(int n, struct frame *frm, const char *name)
+{
+ int i, hex = 0;
+
+ for (i = 0; i < n; i++) {
+ if (i == (n - 1) && ((char *) frm->ptr)[i] == '\0')
+ break;
+
+ if (!isprint(((char *) frm->ptr)[i])) {
+ hex = 1;
+ break;
+ }
+ }
+
+ printf(" %s", name);
+ if (hex) {
+ for (i = 0; i < n; i++)
+ printf(" %02x", ((unsigned char *) frm->ptr)[i]);
+ } else {
+ printf(" \"");
+ for (i = 0; i < n; i++)
+ printf("%c", ((char *) frm->ptr)[i]);
+ printf("\"");
+ }
+
+ frm->ptr += n;
+ frm->len -= n;
+}
+
+static inline void print_de(int, struct frame *frm, int *split, uint16_t *psm, uint8_t *channel);
+
+static inline void print_des(uint8_t de_type, int level, int n, struct frame *frm, int *split, uint16_t *psm, uint8_t *channel)
+{
+ int len = frm->len;
+ while (len - frm->len < n && frm->len > 0)
+ print_de(level, frm, split, psm, channel);
+}
+
+static inline void print_de(int level, struct frame *frm, int *split, uint16_t *psm, uint8_t *channel)
+{
+ int n = 0;
+ uint8_t de_type = parse_de_hdr(frm, &n);
+
+ switch (de_type) {
+ case SDP_DE_NULL:
+ printf(" null");
+ break;
+ case SDP_DE_UINT:
+ case SDP_DE_INT:
+ case SDP_DE_BOOL:
+ print_int(de_type, level, n, frm, psm, channel);
+ break;
+ case SDP_DE_UUID:
+ if (split) {
+ /* Split output by uuids.
+ * Used for printing Protocol Desc List */
+ if (*split) {
+ printf("\n");
+ p_indent(level, NULL);
+ }
+ ++*split;
+ }
+ print_uuid(n, frm, psm, channel);
+ break;
+ case SDP_DE_URL:
+ case SDP_DE_STRING:
+ print_string(n, frm, de_type == SDP_DE_URL? "url": "str");
+ break;
+ case SDP_DE_SEQ:
+ printf(" <");
+ print_des(de_type, level, n, frm, split, psm, channel);
+ printf(" >");
+ break;
+ case SDP_DE_ALT:
+ printf(" [");
+ print_des(de_type, level, n, frm, split, psm, channel);
+ printf(" ]");
+ break;
+ }
+}
+
+static inline void print_srv_srch_pat(int level, struct frame *frm)
+{
+ int len, n1 = 0, n2 = 0;
+
+ p_indent(level, frm);
+ printf("pat");
+
+ if (parse_de_hdr(frm, &n1) == SDP_DE_SEQ) {
+ len = frm->len;
+ while (len - frm->len < n1 && frm->len > 0) {
+ if (parse_de_hdr(frm, &n2) == SDP_DE_UUID) {
+ print_uuid(n2, frm, NULL, NULL);
+ } else {
+ printf("\nERROR: Unexpected syntax (UUID)\n");
+ raw_dump(level, frm);
+ }
+ }
+ printf("\n");
+ } else {
+ printf("\nERROR: Unexpected syntax (SEQ)\n");
+ raw_dump(level, frm);
+ }
+}
+
+static inline void print_attr_id_list(int level, struct frame *frm)
+{
+ uint16_t attr_id;
+ uint32_t attr_id_range;
+ int len, n1 = 0, n2 = 0;
+
+ p_indent(level, frm);
+ printf("aid(s)");
+
+ if (parse_de_hdr(frm, &n1) == SDP_DE_SEQ) {
+ len = frm->len;
+ while (len - frm->len < n1 && frm->len > 0) {
+ /* Print AttributeID */
+ if (parse_de_hdr(frm, &n2) == SDP_DE_UINT) {
+ char *name;
+ switch(n2) {
+ case 2:
+ attr_id = get_u16(frm);
+ name = get_attr_id_name(attr_id);
+ if (!name)
+ name = "unknown";
+ printf(" 0x%04x (%s)", attr_id, name);
+ break;
+ case 4:
+ attr_id_range = get_u32(frm);
+ printf(" 0x%04x - 0x%04x",
+ (attr_id_range >> 16),
+ (attr_id_range & 0xFFFF));
+ break;
+ }
+ } else {
+ printf("\nERROR: Unexpected syntax\n");
+ raw_dump(level, frm);
+ }
+ }
+ printf("\n");
+ } else {
+ printf("\nERROR: Unexpected syntax\n");
+ raw_dump(level, frm);
+ }
+}
+
+static inline void print_attr_list(int level, struct frame *frm)
+{
+ uint16_t attr_id, psm;
+ uint8_t channel;
+ int len, split, n1 = 0, n2 = 0;
+
+ if (parse_de_hdr(frm, &n1) == SDP_DE_SEQ) {
+ len = frm->len;
+ while (len - frm->len < n1 && frm->len > 0) {
+ /* Print AttributeID */
+ if (parse_de_hdr(frm, &n2) == SDP_DE_UINT && n2 == sizeof(attr_id)) {
+ char *name;
+ attr_id = get_u16(frm);
+ p_indent(level, 0);
+ name = get_attr_id_name(attr_id);
+ if (!name)
+ name = "unknown";
+ printf("aid 0x%04x (%s)\n", attr_id, name);
+ split = (attr_id != SDP_ATTR_ID_PROTOCOL_DESCRIPTOR_LIST);
+ psm = 0;
+ channel = 0;
+
+ /* Print AttributeValue */
+ p_indent(level + 1, 0);
+ print_de(level + 1, frm, split ? NULL: &split,
+ attr_id == SDP_ATTR_ID_PROTOCOL_DESCRIPTOR_LIST ? &psm : NULL,
+ attr_id == SDP_ATTR_ID_PROTOCOL_DESCRIPTOR_LIST ? &channel : NULL);
+ printf("\n");
+ } else {
+ printf("\nERROR: Unexpected syntax\n");
+ raw_dump(level, frm);
+ break;
+ }
+ }
+ } else {
+ printf("\nERROR: Unexpected syntax\n");
+ raw_dump(level, frm);
+ }
+}
+
+static inline void print_attr_lists(int level, struct frame *frm)
+{
+ int n = 0, cnt = 0;
+ int count = frm->len;
+
+ if (parse_de_hdr(frm, &n) == SDP_DE_SEQ) {
+ while (count - frm->len < n && frm->len > 0) {
+ p_indent(level, 0);
+ printf("record #%d\n", cnt++);
+ print_attr_list(level + 2, frm);
+ }
+ } else {
+ printf("\nERROR: Unexpected syntax\n");
+ raw_dump(level, frm);
+ }
+}
+
+static inline void print_cont_state(int level, unsigned char *buf)
+{
+ uint8_t cont = buf[0];
+ int i;
+
+ p_indent(level, 0);
+ printf("cont");
+ for (i = 0; i < cont + 1; i++)
+ printf(" %2.2X", buf[i]);
+ printf("\n");
+}
+
+static char *pid2str(uint8_t pid)
+{
+ switch (pid) {
+ case SDP_ERROR_RSP:
+ return "Error Rsp";
+ case SDP_SERVICE_SEARCH_REQ:
+ return "SS Req";
+ case SDP_SERVICE_SEARCH_RSP:
+ return "SS Rsp";
+ case SDP_SERVICE_ATTR_REQ:
+ return "SA Req";
+ case SDP_SERVICE_ATTR_RSP:
+ return "SA Rsp";
+ case SDP_SERVICE_SEARCH_ATTR_REQ:
+ return "SSA Req";
+ case SDP_SERVICE_SEARCH_ATTR_RSP:
+ return "SSA Rsp";
+ default:
+ return "Unknown";
+ }
+}
+
+#define FRAME_TABLE_SIZE 10
+
+static struct frame frame_table[FRAME_TABLE_SIZE];
+
+static int frame_add(struct frame *frm, int count)
+{
+ register struct frame *fr;
+ register unsigned char *data;
+ register int i, len = 0, pos = -1;
+
+ for (i = 0; i < FRAME_TABLE_SIZE; i++) {
+ if (frame_table[i].handle == frm->handle &&
+ frame_table[i].cid == frm->cid) {
+ pos = i;
+ len = frame_table[i].data_len;
+ break;
+ }
+ if (pos < 0 && !frame_table[i].handle)
+ pos = i;
+ }
+
+ if (pos < 0 || count <= 0)
+ return -EIO;
+
+ data = malloc(len + count);
+ if (!data)
+ return -ENOMEM;
+
+ fr = &frame_table[pos];
+
+ if (len > 0) {
+ memcpy(data, fr->data, len);
+ memcpy(data + len, frm->ptr, count);
+ } else
+ memcpy(data, frm->ptr, count);
+
+ if (fr->data)
+ free(fr->data);
+
+ fr->data = data;
+ fr->data_len = len + count;
+ fr->len = fr->data_len;
+ fr->ptr = fr->data;
+ fr->dev_id = frm->dev_id;
+ fr->in = frm->in;
+ fr->ts = frm->ts;
+ fr->handle = frm->handle;
+ fr->cid = frm->cid;
+ fr->num = frm->num;
+ fr->channel = frm->channel;
+ fr->pppdump_fd = frm->pppdump_fd;
+ fr->audio_fd = frm->audio_fd;
+
+ return pos;
+}
+
+static struct frame *frame_get(struct frame *frm, int count)
+{
+ register int pos;
+
+ pos = frame_add(frm, count);
+ if (pos < 0)
+ return frm;
+
+ frame_table[pos].handle = 0;
+
+ return &frame_table[pos];
+}
+
+void sdp_dump(int level, struct frame *frm)
+{
+ sdp_pdu_hdr *hdr = frm->ptr;
+ uint16_t tid = ntohs(hdr->tid);
+ uint16_t len = ntohs(hdr->len);
+ uint16_t total, count;
+ uint8_t cont;
+
+ frm->ptr += SDP_PDU_HDR_SIZE;
+ frm->len -= SDP_PDU_HDR_SIZE;
+
+ p_indent(level, frm);
+ printf("SDP %s: tid 0x%x len 0x%x\n", pid2str(hdr->pid), tid, len);
+
+ switch (hdr->pid) {
+ case SDP_ERROR_RSP:
+ p_indent(level + 1, frm);
+ printf("code 0x%x info ", get_u16(frm));
+ if (frm->len > 0)
+ hex_dump(0, frm, frm->len);
+ else
+ printf("none\n");
+ break;
+
+ case SDP_SERVICE_SEARCH_REQ:
+ /* Parse ServiceSearchPattern */
+ print_srv_srch_pat(level + 1, frm);
+
+ /* Parse MaximumServiceRecordCount */
+ p_indent(level + 1, frm);
+ printf("max %d\n", get_u16(frm));
+
+ /* Parse ContinuationState */
+ print_cont_state(level + 1, frm->ptr);
+ break;
+
+ case SDP_SERVICE_SEARCH_RSP:
+ /* Parse TotalServiceRecordCount */
+ total = get_u16(frm);
+
+ /* Parse CurrentServiceRecordCount */
+ count = get_u16(frm);
+ p_indent(level + 1, frm);
+ if (count < total)
+ printf("count %d of %d\n", count, total);
+ else
+ printf("count %d\n", count);
+
+ /* Parse service record handle(s) */
+ if (count > 0) {
+ int i;
+ p_indent(level + 1, frm);
+ printf("handle%s", count > 1 ? "s" : "");
+ for (i = 0; i < count; i++)
+ printf(" 0x%x", get_u32(frm));
+ printf("\n");
+ }
+
+ /* Parse ContinuationState */
+ print_cont_state(level + 1, frm->ptr);
+ break;
+
+ case SDP_SERVICE_ATTR_REQ:
+ /* Parse ServiceRecordHandle */
+ p_indent(level + 1, frm);
+ printf("handle 0x%x\n", get_u32(frm));
+
+ /* Parse MaximumAttributeByteCount */
+ p_indent(level + 1, frm);
+ printf("max %d\n", get_u16(frm));
+
+ /* Parse ServiceSearchPattern */
+ print_attr_id_list(level + 1, frm);
+
+ /* Parse ContinuationState */
+ print_cont_state(level + 1, frm->ptr);
+ break;
+
+ case SDP_SERVICE_ATTR_RSP:
+ /* Parse AttributeByteCount */
+ count = get_u16(frm);
+ p_indent(level + 1, frm);
+ printf("count %d\n", count);
+
+ /* Parse ContinuationState */
+ cont = *(unsigned char *)(frm->ptr + count);
+
+ if (cont == 0) {
+ /* Parse AttributeList */
+ print_attr_list(level + 1, frame_get(frm, count));
+ } else
+ frame_add(frm, count);
+
+ print_cont_state(level + 1, frm->ptr + count);
+ break;
+
+ case SDP_SERVICE_SEARCH_ATTR_REQ:
+ /* Parse ServiceSearchPattern */
+ print_srv_srch_pat(level + 1, frm);
+
+ /* Parse MaximumAttributeByteCount */
+ p_indent(level + 1, frm);
+ printf("max %d\n", get_u16(frm));
+
+ /* Parse AttributeList */
+ print_attr_id_list(level + 1, frm);
+
+ /* Parse ContinuationState */
+ print_cont_state(level + 1, frm->ptr);
+ break;
+
+ case SDP_SERVICE_SEARCH_ATTR_RSP:
+ /* Parse AttributeByteCount */
+ count = get_u16(frm);
+ p_indent(level + 1, frm);
+ printf("count %d\n", count);
+
+ /* Parse ContinuationState */
+ cont = *(unsigned char *)(frm->ptr + count);
+
+ if (cont == 0) {
+ /* Parse AttributeLists */
+ print_attr_lists(level + 1, frame_get(frm, count));
+ } else
+ frame_add(frm, count);
+
+ print_cont_state(level + 1, frm->ptr + count);
+ break;
+
+ default:
+ raw_dump(level + 1, frm);
+ break;
+ }
+}
--- /dev/null
+/*
+ *
+ * BlueZ - Bluetooth protocol stack for Linux
+ *
+ * Copyright (C) 2001-2002 Ricky Yuen <ryuen@qualcomm.com>
+ * Copyright (C) 2003-2007 Marcel Holtmann <marcel@holtmann.org>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifndef __SDP_H
+#define __SDP_H
+
+/* Bluetooth assigned UUIDs for protocols */
+#define SDP_UUID_SDP 0x0001
+#define SDP_UUID_UDP 0x0002
+#define SDP_UUID_RFCOMM 0x0003
+#define SDP_UUID_TCP 0x0004
+#define SDP_UUID_TCS_BIN 0x0005
+#define SDP_UUID_TCS_AT 0x0006
+#define SDP_UUID_OBEX 0x0008
+#define SDP_UUID_IP 0x0009
+#define SDP_UUID_FTP 0x000A
+#define SDP_UUID_HTTP 0x000C
+#define SDP_UUID_WSP 0x000E
+#define SDP_UUID_BNEP 0x000F /* PAN */
+#define SDP_UUID_HIDP 0x0011 /* HID */
+#define SDP_UUID_HARDCOPY_CONTROL_CHANNEL 0x0012 /* HCRP */
+#define SDP_UUID_HARDCOPY_DATA_CHANNEL 0x0014 /* HCRP */
+#define SDP_UUID_HARDCOPY_NOTIFICATION 0x0016 /* HCRP */
+#define SDP_UUID_AVCTP 0x0017 /* AVCTP */
+#define SDP_UUID_AVDTP 0x0019 /* AVDTP */
+#define SDP_UUID_CMTP 0x001B /* CIP */
+#define SDP_UUID_UDI_C_PLANE 0x001D /* UDI */
+#define SDP_UUID_L2CAP 0x0100
+
+/* Bluetooth assigned UUIDs for Service Classes */
+#define SDP_UUID_SERVICE_DISCOVERY_SERVER 0x1000
+#define SDP_UUID_BROWSE_GROUP_DESCRIPTOR 0x1001
+#define SDP_UUID_PUBLIC_BROWSE_GROUP 0x1002
+#define SDP_UUID_SERIAL_PORT 0x1101
+#define SDP_UUID_LAN_ACCESS_PPP 0x1102
+#define SDP_UUID_DIALUP_NETWORKING 0x1103
+#define SDP_UUID_IR_MC_SYNC 0x1104
+#define SDP_UUID_OBEX_OBJECT_PUSH 0x1105
+#define SDP_UUID_OBEX_FILE_TRANSFER 0x1106
+#define SDP_UUID_IR_MC_SYNC_COMMAND 0x1107
+#define SDP_UUID_HEADSET 0x1108
+#define SDP_UUID_CORDLESS_TELEPHONY 0x1109
+#define SDP_UUID_AUDIO_SOURCE 0x110a /* A2DP */
+#define SDP_UUID_AUDIO_SINK 0x110b /* A2DP */
+#define SDP_UUID_AV_REMOTE_TARGET 0x110c /* AVRCP */
+#define SDP_UUID_ADVANCED_AUDIO 0x110d /* A2DP */
+#define SDP_UUID_AV_REMOTE 0x110e /* AVRCP */
+#define SDP_UUID_VIDEO_CONFERENCING 0x110f /* VCP */
+#define SDP_UUID_INTERCOM 0x1110
+#define SDP_UUID_FAX 0x1111
+#define SDP_UUID_HEADSET_AUDIO_GATEWAY 0x1112
+#define SDP_UUID_WAP 0x1113
+#define SDP_UUID_WAP_CLIENT 0x1114
+#define SDP_UUID_PANU 0x1115 /* PAN */
+#define SDP_UUID_NAP 0x1116 /* PAN */
+#define SDP_UUID_GN 0x1117 /* PAN */
+#define SDP_UUID_DIRECT_PRINTING 0x1118 /* BPP */
+#define SDP_UUID_REFERENCE_PRINTING 0x1119 /* BPP */
+#define SDP_UUID_IMAGING 0x111a /* BIP */
+#define SDP_UUID_IMAGING_RESPONDER 0x111b /* BIP */
+#define SDP_UUID_IMAGING_AUTOMATIC_ARCHIVE 0x111c /* BIP */
+#define SDP_UUID_IMAGING_REFERENCED_OBJECTS 0x111d /* BIP */
+#define SDP_UUID_HANDSFREE 0x111e
+#define SDP_UUID_HANDSFREE_AUDIO_GATEWAY 0x111f
+#define SDP_UUID_DIRECT_PRINTING_REF_OBJS 0x1120 /* BPP */
+#define SDP_UUID_DIRECT_PRINTING_REFERENCE_OBJECTS 0x1120 /* BPP */
+#define SDP_UUID_REFLECTED_UI 0x1121 /* BPP */
+#define SDP_UUID_BASIC_PRINTING 0x1122 /* BPP */
+#define SDP_UUID_PRINTING_STATUS 0x1123 /* BPP */
+#define SDP_UUID_HUMAN_INTERFACE_DEVICE 0x1124 /* HID */
+#define SDP_UUID_HARDCOPY_CABLE_REPLACE 0x1125 /* HCRP */
+#define SDP_UUID_HCR_PRINT 0x1126 /* HCRP */
+#define SDP_UUID_HCR_SCAN 0x1127 /* HCRP */
+#define SDP_UUID_COMMON_ISDN_ACCESS 0x1128 /* CIP */
+#define SDP_UUID_VIDEO_CONFERENCING_GW 0x1129 /* VCP */
+#define SDP_UUID_UDI_MT 0x112a /* UDI */
+#define SDP_UUID_UDI_TA 0x112b /* UDI */
+#define SDP_UUID_AUDIO_VIDEO 0x112c /* VCP */
+#define SDP_UUID_SIM_ACCESS 0x112d /* SAP */
+#define SDP_UUID_PHONEBOOK_ACCESS_PCE 0x112e /* PBAP */
+#define SDP_UUID_PHONEBOOK_ACCESS_PSE 0x112f /* PBAP */
+#define SDP_UUID_PHONEBOOK_ACCESS 0x1130 /* PBAP */
+#define SDP_UUID_PNP_INFORMATION 0x1200
+#define SDP_UUID_GENERIC_NETWORKING 0x1201
+#define SDP_UUID_GENERIC_FILE_TRANSFER 0x1202
+#define SDP_UUID_GENERIC_AUDIO 0x1203
+#define SDP_UUID_GENERIC_TELEPHONY 0x1204
+#define SDP_UUID_UPNP_SERVICE 0x1205 /* ESDP */
+#define SDP_UUID_UPNP_IP_SERVICE 0x1206 /* ESDP */
+#define SDP_UUID_ESDP_UPNP_IP_PAN 0x1300 /* ESDP */
+#define SDP_UUID_ESDP_UPNP_IP_LAP 0x1301 /* ESDP */
+#define SDP_UUID_ESDP_UPNP_L2CAP 0x1302 /* ESDP */
+#define SDP_UUID_VIDEO_SOURCE 0x1303 /* VDP */
+#define SDP_UUID_VIDEO_SINK 0x1304 /* VDP */
+#define SDP_UUID_VIDEO_DISTRIBUTION 0x1305 /* VDP */
+#define SDP_UUID_APPLE_AGENT 0x2112
+
+/* Bluetooth assigned numbers for Attribute IDs */
+#define SDP_ATTR_ID_SERVICE_RECORD_HANDLE 0x0000
+#define SDP_ATTR_ID_SERVICE_CLASS_ID_LIST 0x0001
+#define SDP_ATTR_ID_SERVICE_RECORD_STATE 0x0002
+#define SDP_ATTR_ID_SERVICE_SERVICE_ID 0x0003
+#define SDP_ATTR_ID_PROTOCOL_DESCRIPTOR_LIST 0x0004
+#define SDP_ATTR_ID_BROWSE_GROUP_LIST 0x0005
+#define SDP_ATTR_ID_LANGUAGE_BASE_ATTRIBUTE_ID_LIST 0x0006
+#define SDP_ATTR_ID_SERVICE_INFO_TIME_TO_LIVE 0x0007
+#define SDP_ATTR_ID_SERVICE_AVAILABILITY 0x0008
+#define SDP_ATTR_ID_BLUETOOTH_PROFILE_DESCRIPTOR_LIST 0x0009
+#define SDP_ATTR_ID_DOCUMENTATION_URL 0x000A
+#define SDP_ATTR_ID_CLIENT_EXECUTABLE_URL 0x000B
+#define SDP_ATTR_ID_ICON_10 0x000C
+#define SDP_ATTR_ID_ICON_URL 0x000D
+#define SDP_ATTR_ID_SERVICE_NAME 0x0100
+#define SDP_ATTR_ID_SERVICE_DESCRIPTION 0x0101
+#define SDP_ATTR_ID_PROVIDER_NAME 0x0102
+#define SDP_ATTR_ID_VERSION_NUMBER_LIST 0x0200
+#define SDP_ATTR_ID_GROUP_ID 0x0200
+#define SDP_ATTR_ID_SERVICE_DATABASE_STATE 0x0201
+#define SDP_ATTR_ID_SERVICE_VERSION 0x0300
+
+#define SDP_ATTR_ID_EXTERNAL_NETWORK 0x0301 /* Cordless Telephony */
+#define SDP_ATTR_ID_SUPPORTED_DATA_STORES_LIST 0x0301 /* Synchronization */
+#define SDP_ATTR_ID_REMOTE_AUDIO_VOLUME_CONTROL 0x0302 /* GAP */
+#define SDP_ATTR_ID_SUPPORTED_FORMATS_LIST 0x0303 /* OBEX Object Push */
+#define SDP_ATTR_ID_FAX_CLASS_1_SUPPORT 0x0302 /* Fax */
+#define SDP_ATTR_ID_FAX_CLASS_2_0_SUPPORT 0x0303
+#define SDP_ATTR_ID_FAX_CLASS_2_SUPPORT 0x0304
+#define SDP_ATTR_ID_AUDIO_FEEDBACK_SUPPORT 0x0305
+#define SDP_ATTR_ID_SECURITY_DESCRIPTION 0x030a /* PAN */
+#define SDP_ATTR_ID_NET_ACCESS_TYPE 0x030b /* PAN */
+#define SDP_ATTR_ID_MAX_NET_ACCESS_RATE 0x030c /* PAN */
+#define SDP_ATTR_ID_IPV4_SUBNET 0x030d /* PAN */
+#define SDP_ATTR_ID_IPV6_SUBNET 0x030e /* PAN */
+
+#define SDP_ATTR_ID_SUPPORTED_CAPABILITIES 0x0310 /* Imaging */
+#define SDP_ATTR_ID_SUPPORTED_FEATURES 0x0311 /* Imaging and Hansfree */
+#define SDP_ATTR_ID_SUPPORTED_FUNCTIONS 0x0312 /* Imaging */
+#define SDP_ATTR_ID_TOTAL_IMAGING_DATA_CAPACITY 0x0313 /* Imaging */
+#define SDP_ATTR_ID_SUPPORTED_REPOSITORIES 0x0314 /* PBAP */
+
+#endif /* __SDP_H */
--- /dev/null
+/*
+ *
+ * BlueZ - Bluetooth protocol stack for Linux
+ *
+ * Copyright (C) 2003-2007 Marcel Holtmann <marcel@holtmann.org>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include <stdio.h>
+#include <errno.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/types.h>
+
+#include <netinet/in.h>
+#include <netinet/ip.h>
+#include <netinet/if_ether.h>
+#include <arpa/inet.h>
+#include <netdb.h>
+
+#include "parser.h"
+
+void arp_dump(int level, struct frame *frm)
+{
+#if 0
+ int i;
+ char buf[20];
+ struct sockaddr_in sai;
+ struct ether_arp *arp = (struct ether_arp *) frm->ptr;
+
+ printf("Src ");
+ for (i = 0; i < 5; i++)
+ printf("%02x:", arp->arp_sha[i]);
+ printf("%02x", arp->arp_sha[5]);
+ sai.sin_family = AF_INET;
+ memcpy(&sai.sin_addr, &arp->arp_spa, sizeof(sai.sin_addr));
+ getnameinfo((struct sockaddr *) &sai, sizeof(sai), buf, sizeof(buf),
+ NULL, 0, NI_NUMERICHOST);
+ printf("(%s) ", buf);
+ printf("Tgt ");
+ for (i = 0; i < 5; i++)
+ printf("%02x:", arp->arp_tha[i]);
+ printf("%02x", arp->arp_tha[5]);
+ memcpy(&sai.sin_addr, &arp->arp_tpa, sizeof(sai.sin_addr));
+ getnameinfo((struct sockaddr *) &sai, sizeof(sai), buf, sizeof(buf),
+ NULL, 0, NI_NUMERICHOST);
+ printf("(%s)\n", buf);
+ frm->ptr += sizeof(struct ether_arp);
+ frm->len -= sizeof(struct ether_arp);
+#endif
+ raw_dump(level, frm); // not needed.
+}
+
+void ip_dump(int level, struct frame *frm)
+{
+#if 0
+ char src[50], dst[50];
+ struct ip *ip = (struct ip *) (frm->ptr);
+ uint8_t proto;
+ int len;
+
+ if (ip->ip_v == 4) {
+ struct sockaddr_in sai;
+ proto = ip->ip_p;
+ len = ip->ip_hl << 2;
+ memset(&sai, 0, sizeof(sai));
+ sai.sin_family = AF_INET;
+ memcpy(&sai.sin_addr, &ip->ip_src, sizeof(struct in_addr));
+ getnameinfo((struct sockaddr *) &sai, sizeof(sai),
+ src, sizeof(src), NULL, 0, NI_NUMERICHOST);
+ memcpy(&sai.sin_addr, &ip->ip_dst, sizeof(struct in_addr));
+ getnameinfo((struct sockaddr *) &sai, sizeof(sai),
+ dst, sizeof(dst), NULL, 0, NI_NUMERICHOST);
+ } else if (ip->ip_v == 6) {
+ struct sockaddr_in6 sai6;
+ struct ip6_hdr *ip6 = (struct ip6_hdr *) ip;
+ proto = ip6->ip6_nxt;
+ len = sizeof(struct ip6_hdr);
+ memset(&sai6, 0, sizeof(sai6));
+ sai6.sin6_family = AF_INET6;
+ memcpy(&sai6.sin6_addr, &ip6->ip6_src, sizeof(struct in6_addr));
+ getnameinfo((struct sockaddr *) &sai6, sizeof(sai6),
+ src, sizeof(src), NULL, 0, NI_NUMERICHOST);
+ memcpy(&sai6.sin6_addr, &ip6->ip6_dst, sizeof(struct in6_addr));
+ getnameinfo((struct sockaddr *) &sai6, sizeof(sai6),
+ dst, sizeof(dst), NULL, 0, NI_NUMERICHOST);
+ } else {
+ raw_dump(level, frm);
+ return;
+ }
+
+ printf("src %s ", src);
+ printf("dst %s\n", dst);
+
+ frm->ptr += len;
+ frm->len -= len;
+ p_indent(++level, frm);
+
+ switch (proto) {
+ case IPPROTO_TCP:
+ printf("TCP:\n");
+ break;
+
+ case IPPROTO_UDP:
+ printf("UDP:\n");
+ break;
+
+ case IPPROTO_ICMP:
+ printf("ICMP:\n");
+ break;
+
+ case IPPROTO_ICMPV6:
+ printf("ICMPv6:\n");
+ break;
+
+ default:
+ printf("Unknown Protocol: 0x%02x\n", ip->ip_p);
+ break;
+ }
+#endif
+ raw_dump(level, frm);
+}
--- /dev/null
+
+sbin_PROGRAMS = hcidump
+
+noinst_PROGRAMS = bpasniff csrsniff
+
+LDADD = @BLUEZ_LIBS@ $(top_builddir)/parser/libparser.a
+
+man_MANS = hcidump.8
+
+AM_CFLAGS = @BLUEZ_CFLAGS@
+
+INCLUDES = -I$(top_srcdir)
+
+EXTRA_DIST = $(man_MANS) magic.btsnoop
+
+MAINTAINERCLEANFILES = Makefile.in
--- /dev/null
+# Makefile.in generated by automake 1.10 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+sbin_PROGRAMS = hcidump$(EXEEXT)
+noinst_PROGRAMS = bpasniff$(EXEEXT) csrsniff$(EXEEXT)
+subdir = src
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
+ $(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"
+sbinPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
+PROGRAMS = $(noinst_PROGRAMS) $(sbin_PROGRAMS)
+bpasniff_SOURCES = bpasniff.c
+bpasniff_OBJECTS = bpasniff.$(OBJEXT)
+bpasniff_LDADD = $(LDADD)
+bpasniff_DEPENDENCIES = $(top_builddir)/parser/libparser.a
+csrsniff_SOURCES = csrsniff.c
+csrsniff_OBJECTS = csrsniff.$(OBJEXT)
+csrsniff_LDADD = $(LDADD)
+csrsniff_DEPENDENCIES = $(top_builddir)/parser/libparser.a
+hcidump_SOURCES = hcidump.c
+hcidump_OBJECTS = hcidump.$(OBJEXT)
+hcidump_LDADD = $(LDADD)
+hcidump_DEPENDENCIES = $(top_builddir)/parser/libparser.a
+DEFAULT_INCLUDES = -I. -I$(top_builddir)@am__isrc@
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+SOURCES = bpasniff.c csrsniff.c hcidump.c
+DIST_SOURCES = bpasniff.c csrsniff.c hcidump.c
+man8dir = $(mandir)/man8
+NROFF = nroff
+MANS = $(man_MANS)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BLUEZ_CFLAGS = @BLUEZ_CFLAGS@
+BLUEZ_LIBS = @BLUEZ_LIBS@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EXEEXT = @EXEEXT@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+RANLIB = @RANLIB@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build_alias = @build_alias@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host_alias = @host_alias@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+LDADD = @BLUEZ_LIBS@ $(top_builddir)/parser/libparser.a
+man_MANS = hcidump.8
+AM_CFLAGS = @BLUEZ_CFLAGS@
+INCLUDES = -I$(top_srcdir)
+EXTRA_DIST = $(man_MANS) magic.btsnoop
+MAINTAINERCLEANFILES = Makefile.in
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .o .obj
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --gnu src/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+clean-noinstPROGRAMS:
+ -test -z "$(noinst_PROGRAMS)" || rm -f $(noinst_PROGRAMS)
+install-sbinPROGRAMS: $(sbin_PROGRAMS)
+ @$(NORMAL_INSTALL)
+ test -z "$(sbindir)" || $(MKDIR_P) "$(DESTDIR)$(sbindir)"
+ @list='$(sbin_PROGRAMS)'; for p in $$list; do \
+ p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
+ if test -f $$p \
+ ; then \
+ f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
+ echo " $(INSTALL_PROGRAM_ENV) $(sbinPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(sbindir)/$$f'"; \
+ $(INSTALL_PROGRAM_ENV) $(sbinPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(sbindir)/$$f" || exit 1; \
+ else :; fi; \
+ done
+
+uninstall-sbinPROGRAMS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(sbin_PROGRAMS)'; for p in $$list; do \
+ f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
+ echo " rm -f '$(DESTDIR)$(sbindir)/$$f'"; \
+ rm -f "$(DESTDIR)$(sbindir)/$$f"; \
+ done
+
+clean-sbinPROGRAMS:
+ -test -z "$(sbin_PROGRAMS)" || rm -f $(sbin_PROGRAMS)
+bpasniff$(EXEEXT): $(bpasniff_OBJECTS) $(bpasniff_DEPENDENCIES)
+ @rm -f bpasniff$(EXEEXT)
+ $(LINK) $(bpasniff_OBJECTS) $(bpasniff_LDADD) $(LIBS)
+csrsniff$(EXEEXT): $(csrsniff_OBJECTS) $(csrsniff_DEPENDENCIES)
+ @rm -f csrsniff$(EXEEXT)
+ $(LINK) $(csrsniff_OBJECTS) $(csrsniff_LDADD) $(LIBS)
+hcidump$(EXEEXT): $(hcidump_OBJECTS) $(hcidump_DEPENDENCIES)
+ @rm -f hcidump$(EXEEXT)
+ $(LINK) $(hcidump_OBJECTS) $(hcidump_LDADD) $(LIBS)
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT)
+
+distclean-compile:
+ -rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/bpasniff.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/csrsniff.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/hcidump.Po@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c $<
+
+.c.obj:
+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
+install-man8: $(man8_MANS) $(man_MANS)
+ @$(NORMAL_INSTALL)
+ test -z "$(man8dir)" || $(MKDIR_P) "$(DESTDIR)$(man8dir)"
+ @list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \
+ l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
+ for i in $$l2; do \
+ case "$$i" in \
+ *.8*) list="$$list $$i" ;; \
+ esac; \
+ done; \
+ for i in $$list; do \
+ if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
+ else file=$$i; fi; \
+ ext=`echo $$i | sed -e 's/^.*\\.//'`; \
+ case "$$ext" in \
+ 8*) ;; \
+ *) ext='8' ;; \
+ esac; \
+ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
+ inst=`echo $$inst | sed -e 's/^.*\///'`; \
+ inst=`echo $$inst | sed '$(transform)'`.$$ext; \
+ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
+ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst"; \
+ done
+uninstall-man8:
+ @$(NORMAL_UNINSTALL)
+ @list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \
+ l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
+ for i in $$l2; do \
+ case "$$i" in \
+ *.8*) list="$$list $$i" ;; \
+ esac; \
+ done; \
+ for i in $$list; do \
+ ext=`echo $$i | sed -e 's/^.*\\.//'`; \
+ case "$$ext" in \
+ 8*) ;; \
+ *) ext='8' ;; \
+ esac; \
+ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
+ inst=`echo $$inst | sed -e 's/^.*\///'`; \
+ inst=`echo $$inst | sed '$(transform)'`.$$ext; \
+ echo " rm -f '$(DESTDIR)$(man8dir)/$$inst'"; \
+ rm -f "$(DESTDIR)$(man8dir)/$$inst"; \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile $(PROGRAMS) $(MANS)
+installdirs:
+ for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+ -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
+clean: clean-am
+
+clean-am: clean-generic clean-noinstPROGRAMS clean-sbinPROGRAMS \
+ mostlyclean-am
+
+distclean: distclean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+info: info-am
+
+info-am:
+
+install-data-am: install-man
+
+install-dvi: install-dvi-am
+
+install-exec-am: install-sbinPROGRAMS
+
+install-html: install-html-am
+
+install-info: install-info-am
+
+install-man: install-man8
+
+install-pdf: install-pdf-am
+
+install-ps: install-ps-am
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-man uninstall-sbinPROGRAMS
+
+uninstall-man: uninstall-man8
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
+ clean-noinstPROGRAMS clean-sbinPROGRAMS ctags distclean \
+ distclean-compile distclean-generic distclean-tags distdir dvi \
+ dvi-am html html-am info info-am install install-am \
+ install-data install-data-am install-dvi install-dvi-am \
+ install-exec install-exec-am install-html install-html-am \
+ install-info install-info-am install-man install-man8 \
+ install-pdf install-pdf-am install-ps install-ps-am \
+ install-sbinPROGRAMS install-strip installcheck \
+ installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-compile \
+ mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \
+ uninstall-am uninstall-man uninstall-man8 \
+ uninstall-sbinPROGRAMS
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
--- /dev/null
+/*
+ *
+ * BlueZ - Bluetooth protocol stack for Linux
+ *
+ * Copyright (C) 2004-2007 Marcel Holtmann <marcel@holtmann.org>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include <stdio.h>
+#include <errno.h>
+#include <ctype.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <malloc.h>
+#include <getopt.h>
+#include <signal.h>
+#include <sys/ioctl.h>
+#include <sys/socket.h>
+
+#include <bluetooth/bluetooth.h>
+#include <bluetooth/hci.h>
+#include <bluetooth/hci_lib.h>
+
+#include <netinet/in.h>
+
+#include "parser/parser.h"
+
+static volatile sig_atomic_t __io_canceled = 0;
+
+static void sig_hup(int sig)
+{
+}
+
+static void sig_term(int sig)
+{
+ __io_canceled = 1;
+}
+
+static int read_revision(int dd, char *revision, int size)
+{
+ struct hci_request rq;
+ unsigned char req[] = { 0x07 };
+ unsigned char buf[46];
+
+ memset(&rq, 0, sizeof(rq));
+ rq.ogf = OGF_VENDOR_CMD;
+ rq.ocf = 0x000e;
+ rq.cparam = req;
+ rq.clen = sizeof(req);
+ rq.rparam = &buf;
+ rq.rlen = sizeof(buf);
+
+ if (hci_send_req(dd, &rq, 1000) < 0)
+ return -1;
+
+ if (buf[0] > 0) {
+ errno = EIO;
+ return -1;
+ }
+
+ if (revision)
+ strncpy(revision, (char *) (buf + 1), size);
+
+ return 0;
+}
+
+static int enable_sniffer(int dd, uint8_t enable)
+{
+ struct hci_request rq;
+ unsigned char req[] = { 0x00, enable };
+ unsigned char buf[1];
+
+ memset(&rq, 0, sizeof(rq));
+ rq.ogf = OGF_VENDOR_CMD;
+ rq.ocf = 0x000e;
+ rq.cparam = req;
+ rq.clen = sizeof(req);
+ rq.rparam = &buf;
+ rq.rlen = sizeof(buf);
+
+ if (hci_send_req(dd, &rq, 1000) < 0)
+ return -1;
+
+ if (buf[0] > 0) {
+ errno = EIO;
+ return -1;
+ }
+
+ return 0;
+}
+
+static int enable_sync(int dd, uint8_t enable, bdaddr_t *bdaddr)
+{
+ struct hci_request rq;
+ unsigned char req[] = { 0x01, enable,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0xfa, 0x00 };
+
+ memcpy(req + 2, bdaddr, 6);
+
+ memset(&rq, 0, sizeof(rq));
+ rq.ogf = OGF_VENDOR_CMD;
+ rq.ocf = 0x000e;
+ rq.cparam = req;
+ rq.clen = sizeof(req);
+
+ hci_send_req(dd, &rq, 1000);
+
+ return 0;
+}
+
+static char *type2str(uint8_t type)
+{
+ switch (type) {
+ case 0x00:
+ return "NULL";
+ case 0x01:
+ return "POLL";
+ case 0x02:
+ return "FHS";
+ case 0x03:
+ return "DM1";
+ case 0x04:
+ return "DH1";
+ case 0x05:
+ return "HV1";
+ case 0x06:
+ return "HV2";
+ case 0x07:
+ return "HV3";
+ case 0x08:
+ return "DV";
+ case 0x09:
+ return "AUX1";
+ case 0x0a:
+ return "DM3";
+ case 0x0b:
+ return "DH3";
+ case 0x0c:
+ return "EV4";
+ case 0x0d:
+ return "EV5";
+ case 0x0e:
+ return "DM5";
+ case 0x0f:
+ return "DH5";
+ case 0xff:
+ return "ID";
+ default:
+ return "UNK";
+ }
+}
+
+static void decode(unsigned char *buf, int count)
+{
+ struct frame frm;
+ uint8_t id, status, channel;
+ uint16_t num, len;
+ uint32_t time;
+ uint8_t type, addr, temp, hdr;
+ uint8_t flow, arqn, seqn, hec, llid, pflow;
+ uint16_t plen;
+
+ if (count < 7)
+ return;
+
+ id = buf[0];
+ num = ntohs(bt_get_unaligned((uint16_t *) (buf + 1)));
+ len = btohs(bt_get_unaligned((uint16_t *) (buf + 3)));
+
+ status = buf[5];
+ time = ntohl(bt_get_unaligned((uint32_t *) (buf + 6)));
+ channel = buf[10];
+
+ if (len < 8)
+ return;
+
+ type = (len < 7) ? 0xff : bt_get_unaligned((uint8_t *) (buf + 11));
+
+ if (type < 2)
+ return;
+
+ p_indent(-1, NULL);
+
+ memset(&frm, 0, sizeof(frm));
+ frm.data = buf + 12;
+ frm.data_len = count - 12;
+ frm.ptr = frm.data;
+ frm.len = frm.data_len;
+ frm.in = 0;
+ frm.master = 0;
+ frm.handle = 0;
+ frm.flags = 0;
+
+ p_indent(0, &frm);
+
+ printf("BPA: id %d num %d status 0x%02x time %d channel %2d len %d\n",
+ id, num, status, time, channel, len - 6);
+
+ if (type < 3) {
+ printf(" %s\n", type2str(type));
+ raw_dump(1, &frm);
+ return;
+ }
+
+ addr = bt_get_unaligned((uint8_t *) (buf + 12));
+ temp = bt_get_unaligned((uint8_t *) (buf + 13));
+ flow = (temp & 0x04) >> 2;
+ arqn = (temp & 0x02) >> 1;
+ seqn = (temp & 0x01);
+ hec = bt_get_unaligned((uint8_t *) (buf + 14));
+
+ hdr = bt_get_unaligned((uint8_t *) (buf + 20));
+ plen = ((hdr & 0x10) >> 4) | ((hdr & 0x08) >> 2) | (hdr & 0x04) | ((hdr & 0x02) << 2) | ((hdr & 0x01) << 4);
+ pflow = ((hdr & 0x20) >> 5);
+ llid = ((hdr & 0x80) >> 7) | ((hdr & 0x40) >> 5);
+ hdr = bt_get_unaligned((uint8_t *) (buf + 21));
+ plen = plen | ((hdr & 0x80) >> 2) | (hdr & 0x40) | ((hdr & 0x20) << 2) | ((hdr & 0x08) << 4);
+
+ p_indent(0, &frm);
+
+ printf("%s: addr 0x%02x flow %d arqn %d seqn %d hec 0x%02x llid %d pflow %d plen %d\n",
+ type2str(type), addr, flow, arqn, seqn, hec, llid, pflow, plen);
+
+ if (type == 0x03 && llid == 3) {
+ memset(&frm, 0, sizeof(frm));
+ frm.data = buf + 22;
+ frm.data_len = plen;
+ frm.ptr = frm.data;
+ frm.len = frm.data_len;
+ frm.in = 0;
+ frm.master = 1;
+ frm.handle = 0;
+ frm.flags = llid;
+
+ lmp_dump(1, &frm);
+ return;
+ }
+
+ raw_dump(1, &frm);
+}
+
+static void process_frames(int dev)
+{
+ struct sigaction sa;
+ struct hci_filter flt;
+ unsigned char *buf;
+ int dd, size = 2048;
+
+ buf = malloc(size);
+ if (!buf) {
+ fprintf(stderr, "Can't allocate buffer for hci%d: %s (%d)\n",
+ dev, strerror(errno), errno);
+ return;
+ }
+
+ dd = hci_open_dev(dev);
+ if (dd < 0) {
+ fprintf(stderr, "Can't open device hci%d: %s (%d)\n",
+ dev, strerror(errno), errno);
+ free(buf);
+ return;
+ }
+
+ hci_filter_clear(&flt);
+ hci_filter_set_ptype(HCI_VENDOR_PKT, &flt);
+ hci_filter_set_ptype(HCI_EVENT_PKT, &flt);
+ hci_filter_set_event(EVT_VENDOR, &flt);
+
+ if (setsockopt(dd, SOL_HCI, HCI_FILTER, &flt, sizeof(flt)) < 0) {
+ fprintf(stderr, "Can't set filter for hci%d: %s (%d)\n",
+ dev, strerror(errno), errno);
+ hci_close_dev(dd);
+ free(buf);
+ return;
+ }
+
+ memset(&sa, 0, sizeof(sa));
+ sa.sa_flags = SA_NOCLDSTOP;
+ sa.sa_handler = SIG_IGN;
+ sigaction(SIGCHLD, &sa, NULL);
+ sigaction(SIGPIPE, &sa, NULL);
+
+ sa.sa_handler = sig_term;
+ sigaction(SIGTERM, &sa, NULL);
+ sigaction(SIGINT, &sa, NULL);
+
+ sa.sa_handler = sig_hup;
+ sigaction(SIGHUP, &sa, NULL);
+
+ while (!__io_canceled) {
+ int len;
+
+ len = read(dd, buf, size);
+ if (len < 0)
+ break;
+ if (len < 2)
+ continue;
+
+ if (buf[0] == 0x04 && buf[1] == 0xff) {
+ if (buf[3] == 0x02) {
+ switch (buf[4]) {
+ case 0x00:
+ printf("Waiting for synchronization...\n");
+ break;
+ case 0x08:
+ printf("Synchronization lost\n");
+ __io_canceled = 1;
+ break;
+ default:
+ printf("Unknown event 0x%02x\n", buf[4]);
+ break;
+ }
+ }
+ }
+
+ if (buf[0] != 0xff)
+ continue;
+
+ decode(buf + 1, len - 1);
+ }
+
+ hci_close_dev(dd);
+
+ free(buf);
+}
+
+static void usage(void)
+{
+ printf("bpasniff - Utility for the BPA 100/105 sniffers\n\n");
+ printf("Usage:\n"
+ "\tbpasniff [-i <dev>] <master-bdaddr>\n");
+}
+
+static struct option main_options[] = {
+ { "help", 0, 0, 'h' },
+ { "device", 1, 0, 'i' },
+ { 0, 0, 0, 0}
+};
+
+int main(int argc, char *argv[])
+{
+ struct hci_dev_info di;
+ struct hci_version ver;
+ char rev[46];
+ bdaddr_t bdaddr;
+ int dd, opt, dev = 0;
+
+ bacpy(&bdaddr, BDADDR_ANY);
+
+ while ((opt=getopt_long(argc, argv, "+i:h", main_options, NULL)) != -1) {
+ switch (opt) {
+ case 'i':
+ dev = hci_devid(optarg);
+ if (dev < 0) {
+ perror("Invalid device");
+ exit(1);
+ }
+ break;
+
+ case 'h':
+ default:
+ usage();
+ exit(0);
+ }
+ }
+
+ argc -= optind;
+ argv += optind;
+ optind = 0;
+
+ argc -= optind;
+ argv += optind;
+ optind = 0;
+
+ if (argc < 1) {
+ usage();
+ exit(1);
+ }
+
+ str2ba(argv[0], &bdaddr);
+
+ dd = hci_open_dev(dev);
+ if (dd < 0) {
+ fprintf(stderr, "Can't open device hci%d: %s (%d)\n",
+ dev, strerror(errno), errno);
+ exit(1);
+ }
+
+ if (hci_devinfo(dev, &di) < 0) {
+ fprintf(stderr, "Can't get device info for hci%d: %s (%d)\n",
+ dev, strerror(errno), errno);
+ hci_close_dev(dd);
+ exit(1);
+ }
+
+ if (hci_read_local_version(dd, &ver, 1000) < 0) {
+ fprintf(stderr, "Can't read version info for hci%d: %s (%d)\n",
+ dev, strerror(errno), errno);
+ hci_close_dev(dd);
+ exit(1);
+ }
+
+ if (ver.manufacturer != 12) {
+ fprintf(stderr, "Can't find sniffer at hci%d: %s (%d)\n",
+ dev, strerror(ENOSYS), ENOSYS);
+ hci_close_dev(dd);
+ exit(1);
+ }
+
+ if (read_revision(dd, rev, sizeof(rev)) < 0) {
+ fprintf(stderr, "Can't read revision info for hci%d: %s (%d)\n",
+ dev, strerror(errno), errno);
+ hci_close_dev(dd);
+ exit(1);
+ }
+
+ printf("%s\n", rev);
+
+ if (enable_sniffer(dd, 0x01) < 0) {
+ fprintf(stderr, "Can't enable sniffer for hci%d: %s (%d)\n",
+ dev, strerror(errno), errno);
+ hci_close_dev(dd);
+ exit(1);
+ }
+
+ if (enable_sync(dd, 0x01, &bdaddr) < 0) {
+ fprintf(stderr, "Can't enable sync for hci%d: %s (%d)\n",
+ dev, strerror(errno), errno);
+ enable_sniffer(dd, 0x00);
+ hci_close_dev(dd);
+ exit(1);
+ }
+
+ init_parser(DUMP_EXT | DUMP_VERBOSE, ~0L, 0, DEFAULT_COMPID, -1, -1);
+
+ process_frames(dev);
+
+ if (enable_sync(dd, 0x00, &bdaddr) < 0) {
+ fprintf(stderr, "Can't disable sync for hci%d: %s (%d)\n",
+ dev, strerror(errno), errno);
+ enable_sniffer(dd, 0x00);
+ hci_close_dev(dd);
+ exit(1);
+ }
+
+ if (enable_sniffer(dd, 0x00) < 0) {
+ fprintf(stderr, "Can't disable sniffer for hci%d: %s (%d)\n",
+ dev, strerror(errno), errno);
+ hci_close_dev(dd);
+ exit(1);
+ }
+
+ hci_close_dev(dd);
+
+ return 0;
+}
--- /dev/null
+/*
+ *
+ * BlueZ - Bluetooth protocol stack for Linux
+ *
+ * Copyright (C) 2004-2007 Marcel Holtmann <marcel@holtmann.org>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include <stdio.h>
+#include <errno.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <getopt.h>
+#include <signal.h>
+#include <sys/ioctl.h>
+#include <sys/socket.h>
+
+#include <bluetooth/bluetooth.h>
+#include <bluetooth/hci.h>
+#include <bluetooth/hci_lib.h>
+
+static volatile sig_atomic_t __io_canceled = 0;
+
+static void sig_hup(int sig)
+{
+}
+
+static void sig_term(int sig)
+{
+ __io_canceled = 1;
+}
+
+static struct {
+ uint16_t id;
+ uint16_t ver;
+ char *date;
+} firmware_map[] = {
+ { 195, 1, "2001-11-27" },
+ { 220, 2, "2002-01-03" },
+ { 269, 3, "2002-02-22" },
+ { 270, 4, "2002-02-26" },
+ { 284, 5, "2002-03-12" },
+ { 292, 6, "2002-03-20" },
+ { 305, 7, "2002-04-12" },
+ { 306, 8, "2002-04-12" },
+ { 343, 9, "2002-05-02" },
+ { 346, 10, "2002-05-03" },
+ { 355, 11, "2002-05-16" },
+ { 256, 11, "2002-05-16" },
+ { 390, 12, "2002-06-26" },
+ { 450, 13, "2002-08-16" },
+ { 451, 13, "2002-08-16" },
+ { 533, 14, "2002-10-11" },
+ { 580, 15, "2002-11-14" },
+ { 623, 16, "2002-12-12" },
+ { 678, 17, "2003-01-29" },
+ { 847, 18, "2003-04-17" },
+ { 876, 19, "2003-06-10" },
+ { 997, 22, "2003-09-05" },
+ { 1027, 23, "2003-10-03" },
+ { 1029, 24, "2003-10-03" },
+ { 1112, 25, "2003-12-03" },
+ { 1113, 25, "2003-12-03" },
+ { 1133, 26, "2003-12-18" },
+ { 1134, 26, "2003-12-18" },
+ { 1223, 27, "2004-03-08" },
+ { 1224, 27, "2004-03-08" },
+ { 1319, 31, "2004-04-22" },
+ { 1320, 31, "2004-04-22" },
+ { 1427, 34, "2004-06-16" },
+ { 1508, 35, "2004-07-19" },
+ { 1509, 35, "2004-07-19" },
+ { 1587, 36, "2004-08-18" },
+ { 1588, 36, "2004-08-18" },
+ { 1641, 37, "2004-09-16" },
+ { 1642, 37, "2004-09-16" },
+ { 1699, 38, "2004-10-07" },
+ { 1700, 38, "2004-10-07" },
+ { 1752, 39, "2004-11-02" },
+ { 1753, 39, "2004-11-02" },
+ { 1759, 40, "2004-11-03" },
+ { 1760, 40, "2004-11-03" },
+ { 1761, 40, "2004-11-03" },
+ { 2009, 41, "2005-04-06" },
+ { 2010, 41, "2005-04-06" },
+ { 2011, 41, "2005-04-06" },
+ { 2016, 42, "2005-04-11" },
+ { 2017, 42, "2005-04-11" },
+ { 2018, 42, "2005-04-11" },
+ { 2023, 43, "2005-04-14" },
+ { 2024, 43, "2005-04-14" },
+ { 2025, 43, "2005-04-14" },
+ { 2032, 44, "2005-04-18" },
+ { 2033, 44, "2005-04-18" },
+ { 2034, 44, "2005-04-18" },
+ { 2288, 45, "2005-07-08" },
+ { 2289, 45, "2005-07-08" },
+ { 2290, 45, "2005-07-08" },
+ { 2388, 46, "2005-08-17" },
+ { 2389, 46, "2005-08-17" },
+ { 2390, 46, "2005-08-17" },
+ { 2869, 47, "2006-02-15" },
+ { 2870, 47, "2006-02-15" },
+ { 2871, 47, "2006-02-15" },
+ { 3214, 48, "2006-02-16" },
+ { 3215, 48, "2006-02-16" },
+ { 3216, 48, "2006-02-16" },
+ { 0, }
+};
+
+static int id2ver(uint16_t id)
+{
+ int i;
+
+ for (i = 0; firmware_map[i].id; i++)
+ if (firmware_map[i].id == id)
+ return firmware_map[i].ver;
+
+ return -1;
+}
+
+static void usage(void)
+{
+ printf("csrsniff - Utility for the CSR BlueCore sniffers\n\n");
+ printf("Usage:\n"
+ "\tcsrsniff [-i <dev>] <master-bdaddr> [slave-bdaddr]\n");
+}
+
+static struct option main_options[] = {
+ { "help", 0, 0, 'h' },
+ { "device", 1, 0, 'i' },
+ { 0, 0, 0, 0}
+};
+
+int main(int argc, char *argv[])
+{
+ struct sigaction sa;
+ struct hci_dev_info di;
+ struct hci_version ver;
+ struct hci_filter flt;
+ bdaddr_t bdaddr, master, slave;
+ int need_raw;
+ int dd, opt, dev = 0;
+
+ bacpy(&slave, BDADDR_ANY);
+
+ while ((opt=getopt_long(argc, argv, "+i:h", main_options, NULL)) != -1) {
+ switch (opt) {
+ case 'i':
+ dev = hci_devid(optarg);
+ if (dev < 0) {
+ perror("Invalid device");
+ exit(1);
+ }
+ break;
+
+ case 'h':
+ default:
+ usage();
+ exit(0);
+ }
+ }
+
+ argc -= optind;
+ argv += optind;
+ optind = 0;
+
+ if (argc < 1) {
+ usage();
+ exit(1);
+ }
+
+ str2ba(argv[0], &master);
+
+ if (argc > 1)
+ str2ba(argv[1], &slave);
+
+ dd = hci_open_dev(dev);
+ if (dd < 0) {
+ fprintf(stderr, "Can't open device hci%d: %s (%d)\n",
+ dev, strerror(errno), errno);
+ exit(1);
+ }
+
+ if (hci_devinfo(dev, &di) < 0) {
+ fprintf(stderr, "Can't get device info for hci%d: %s (%d)\n",
+ dev, strerror(errno), errno);
+ hci_close_dev(dd);
+ exit(1);
+ }
+
+ if (hci_read_local_version(dd, &ver, 1000) < 0) {
+ fprintf(stderr, "Can't read version for hci%d: %s (%d)\n",
+ dev, strerror(errno), errno);
+ hci_close_dev(dd);
+ exit(1);
+ }
+
+ if (ver.manufacturer != 10 || id2ver(ver.hci_rev) < 0) {
+ fprintf(stderr, "Can't find sniffer at hci%d: %s (%d)\n",
+ dev, strerror(ENOSYS), ENOSYS);
+ hci_close_dev(dd);
+ exit(1);
+ }
+
+ if (!bacmp(&di.bdaddr, BDADDR_ANY)) {
+ if (hci_read_bd_addr(dd, &bdaddr, 1000) < 0) {
+ fprintf(stderr, "Can't read address for hci%d: %s (%d)\n",
+ dev, strerror(errno), errno);
+ hci_close_dev(dd);
+ exit(1);
+ }
+ } else
+ bacpy(&bdaddr, &di.bdaddr);
+
+ need_raw = !hci_test_bit(HCI_RAW, &di.flags);
+
+ hci_filter_clear(&flt);
+ hci_filter_set_ptype(HCI_ACLDATA_PKT, &flt);
+ hci_filter_set_ptype(HCI_EVENT_PKT, &flt);
+ hci_filter_set_event(EVT_VENDOR, &flt);
+
+ if (setsockopt(dd, SOL_HCI, HCI_FILTER, &flt, sizeof(flt)) < 0) {
+ fprintf(stderr, "Can't set filter for hci%d: %s (%d)\n",
+ dev, strerror(errno), errno);
+ hci_close_dev(dd);
+ exit(1);
+ }
+
+ memset(&sa, 0, sizeof(sa));
+ sa.sa_flags = SA_NOCLDSTOP;
+ sa.sa_handler = SIG_IGN;
+ sigaction(SIGCHLD, &sa, NULL);
+ sigaction(SIGPIPE, &sa, NULL);
+
+ sa.sa_handler = sig_term;
+ sigaction(SIGTERM, &sa, NULL);
+ sigaction(SIGINT, &sa, NULL);
+
+ sa.sa_handler = sig_hup;
+ sigaction(SIGHUP, &sa, NULL);
+
+ if (need_raw) {
+ if (ioctl(dd, HCISETRAW, 1) < 0) {
+ fprintf(stderr, "Can't set raw mode on hci%d: %s (%d)\n",
+ dev, strerror(errno), errno);
+ hci_close_dev(dd);
+ exit(1);
+ }
+ }
+
+ printf("CSR sniffer - Bluetooth packet analyzer ver %s\n", VERSION);
+
+ if (need_raw) {
+ if (ioctl(dd, HCISETRAW, 0) < 0)
+ fprintf(stderr, "Can't clear raw mode on hci%d: %s (%d)\n",
+ dev, strerror(errno), errno);
+ }
+
+ hci_close_dev(dd);
+
+ return 0;
+}
--- /dev/null
+.TH HCIDUMP 8 "Nov 12 2002" BlueZ "Linux System Administration"
+.SH NAME
+hcidump \- Parse HCI data
+.SH SYNOPSIS
+.B hcidump [-h]
+.br
+.B hcidump [option [option...]] [filter]
+
+.SH DESCRIPTION
+.LP
+.B
+hcidump
+reads raw HCI data coming from and going to a Bluetooth device (which can be
+specified with the option
+.BR -i ,
+default is the first available one) and prints to screen commands, events and
+data in a human-readable form. Optionally, the dump can be written to a file
+rather than parsed, and the dump file can be parsed in a subsequent moment.
+.SH OPTIONS
+.TP
+.BI -h
+Prints usage info and exits
+.TP
+.BI -i " <hciX>"
+Data is read from
+.IR hciX ,
+which must be the name of an installed Bluetooth device. If not specified,
+and if
+.B
+-r
+option is not set, data is read from the first available Bluetooth device.
+.TP
+.BI -l " <len>" "\fR,\fP \-\^\-snap-len=" "<len>"
+Sets max length of processed packets to
+.IR len .
+.TP
+.BI -p " <psm>" "\fR,\fP \-\^\-psm=" "<psm>"
+Sets default Protocol Service Multiplexer to
+.IR psm .
+.TP
+.BI -m " <compid>" "\fR,\fP \-\^\-manufacturer=" "<compid>"
+Sets default company id for manufacturer to
+.IR compid .
+.TP
+.BI -w " <file>" "\fR,\fP \-\^\-save-dump=" "<file>"
+Parse output is not printed to screen, instead data read from device is saved in file
+.IR file .
+The saved dump file can be subsequently parsed with option
+.BR -r .
+.TP
+.BI -r " <file>" "\fR,\fP \-\^\-read-dump=" "<file>"
+Data is not read from a Bluetooth device, but from file
+.IR file .
+.I
+file
+is created with option
+.BR -w .
+.TP
+.BI -s " <host>" "\fR,\fP \-\^\-send-dump=" "<host>"
+Parse output is not printed to screen, instead data read from device is sent to host
+.IR host .
+.TP
+.BI -n " <host>" "\fR,\fP \-\^\-recv-dump=" "<host>"
+Data is not read from a Bluetooth device, but from host
+.IR host .
+.TP
+.BI -d " <host>" "\fR,\fP \-\^\-wait-dump=" "<host>"
+Data is read from a Bluetooth device, but then send to
+.IR host
+for processing. No data is read if no host is connected.
+.TP
+.BR -t ", " "\-\^\-timestamp"
+Prepend a time stamp to every packet.
+.TP
+.BR -a ", " "\-\^\-ascii"
+For every packet, not only is the packet type displayed, but also all data in ASCII.
+.TP
+.BR -x ", " "\-\^\-hex"
+For every packet, not only is the packet type displayed, but also all data in hex.
+.TP
+.BR -X ", " "\-\^\-ext"
+For every packet, not only is the packet type displayed, but also all data in hex and ASCII.
+.TP
+.BR -R ", " "\-\^\-raw"
+For every packet, only the raw data is displayed.
+.TP
+.BR -C ", " "\-\^\-cmtp=" "<psm>"
+Sets the PSM value for the CAPI Message Transport Protocol.
+.TP
+.BR -H ", " "\-\^\-hcrp=" "<psm>"
+Sets the PSM value for the Hardcopy Control Channel.
+.TP
+.BR -O ", " "\-\^\-obex=" "<channel>"
+Sets the RFCOMM channel value for the Object Exchange Protocol.
+.TP
+.BR -P ", " "\-\^\-ppp=" "<channel>"
+Sets the RFCOMM channel value for the Point-to-Point Protocol.
+.TP
+.BR -D ", " "\-\^\-pppdump=" "<file>"
+Extract PPP traffic with pppdump format.
+.TP
+.BR -A ", " "\-\^\-audio=" "<file>"
+Extract SCO audio data.
+.TP
+.BR -B ", " "\-\^\-btsnoop"
+Use the BTSnoop file format.
+.TP
+.BR -V ", " "\-\^\-verbose"
+Enables a more verbose decoding of every packet.
+.TP
+.BR -Y ", " "\-\^\-novendor"
+Don't display any vendor commands or events and don't show any pin code or link key in plain text.
+.TP
+.BR -N ", " "\-\^\-noappend"
+No appending to existing files. Always create new files.
+.TP
+.BR -4 ", " "\-\^\-ipv4"
+Use IPv4 when sending information over the network
+.TP
+.BR -6 ", " "\-\^\-ipv6"
+Use IPv6 when sending information over the network
+.SH FILTERS
+.B
+filter
+is a space-separated list of packet categories: available categories are
+.IR lmp ,
+.IR hci ,
+.IR sco ,
+.IR l2cap ,
+.IR rfcomm ,
+.IR sdp ,
+.IR bnep ,
+.IR cmtp ,
+.IR hidp ,
+.IR hcrp ,
+.IR avdtp ,
+.IR avctp ,
+.IR obex ,
+.IR capi
+and
+.IR ppp .
+If filters are used, only packets belonging to the specified categories are
+dumped. By default, all packets are dumped.
+.SH AUTHORS
+Written by Maxim Krasnyansky <maxk@qualcomm.com>
+and Marcel Holtmann <marcel@holtmann.org>
+.PP
+man page by Fabrizio Gennari <fabrizio.gennari@philips.com>
--- /dev/null
+/*
+ *
+ * BlueZ - Bluetooth protocol stack for Linux
+ *
+ * Copyright (C) 2000-2002 Maxim Krasnyansky <maxk@qualcomm.com>
+ * Copyright (C) 2003-2007 Marcel Holtmann <marcel@holtmann.org>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include <stdio.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <string.h>
+#include <getopt.h>
+#include <sys/poll.h>
+#include <sys/stat.h>
+#include <sys/types.h>
+#include <sys/ioctl.h>
+#include <sys/socket.h>
+
+#include <bluetooth/bluetooth.h>
+#include <bluetooth/hci.h>
+#include <bluetooth/hci_lib.h>
+
+#include <arpa/inet.h>
+#include <netinet/in.h>
+#include <netdb.h>
+
+#include "parser/parser.h"
+#include "parser/sdp.h"
+
+#if __BYTE_ORDER == __LITTLE_ENDIAN
+static inline uint64_t ntoh64(uint64_t n)
+{
+ uint64_t h;
+ uint64_t tmp = ntohl(n & 0x00000000ffffffff);
+ h = ntohl(n >> 32);
+ h |= tmp << 32;
+ return h;
+}
+#elif __BYTE_ORDER == __BIG_ENDIAN
+#define ntoh64(x) (x)
+#else
+#error "Unknown byte order"
+#endif
+#define hton64(x) ntoh64(x)
+
+#define SNAP_LEN HCI_MAX_FRAME_SIZE
+#define DEFAULT_PORT "10839";
+
+/* Modes */
+enum {
+ PARSE,
+ READ,
+ WRITE,
+ RECEIVE,
+ SEND,
+ SERVER,
+ PPPDUMP,
+ AUDIO
+};
+
+/* Default options */
+static int snap_len = SNAP_LEN;
+static int mode = PARSE;
+static int permcheck = 1;
+static int noappend = 0;
+static char *dump_file = NULL;
+static char *pppdump_file = NULL;
+static char *audio_file = NULL;
+static char *dump_addr;
+static char *dump_port = DEFAULT_PORT;
+static int af = AF_UNSPEC;
+
+struct hcidump_hdr {
+ uint16_t len;
+ uint8_t in;
+ uint8_t pad;
+ uint32_t ts_sec;
+ uint32_t ts_usec;
+} __attribute__ ((packed));
+#define HCIDUMP_HDR_SIZE (sizeof(struct hcidump_hdr))
+
+struct btsnoop_hdr {
+ uint8_t id[8]; /* Identification Pattern */
+ uint32_t version; /* Version Number = 1 */
+ uint32_t type; /* Datalink Type */
+} __attribute__ ((packed));
+#define BTSNOOP_HDR_SIZE (sizeof(struct btsnoop_hdr))
+
+struct btsnoop_pkt {
+ uint32_t size; /* Original Length */
+ uint32_t len; /* Included Length */
+ uint32_t flags; /* Packet Flags */
+ uint32_t drops; /* Cumulative Drops */
+ uint64_t ts; /* Timestamp microseconds */
+ uint8_t data[0]; /* Packet Data */
+} __attribute__ ((packed));
+#define BTSNOOP_PKT_SIZE (sizeof(struct btsnoop_pkt))
+
+static uint8_t btsnoop_id[] = { 0x62, 0x74, 0x73, 0x6e, 0x6f, 0x6f, 0x70, 0x00 };
+
+static uint32_t btsnoop_version = 0;
+static uint32_t btsnoop_type = 0;
+
+struct pktlog_hdr {
+ uint32_t len;
+ uint64_t ts;
+ uint8_t type;
+} __attribute__ ((packed));
+#define PKTLOG_HDR_SIZE (sizeof(struct pktlog_hdr))
+
+static inline int read_n(int fd, char *buf, int len)
+{
+ int t = 0, w;
+
+ while (len > 0) {
+ if ((w = read(fd, buf, len)) < 0) {
+ if (errno == EINTR || errno == EAGAIN)
+ continue;
+ return -1;
+ }
+ if (!w)
+ return 0;
+ len -= w; buf += w; t += w;
+ }
+ return t;
+}
+
+static inline int write_n(int fd, char *buf, int len)
+{
+ int t = 0, w;
+
+ while (len > 0) {
+ if ((w = write(fd, buf, len)) < 0) {
+ if (errno == EINTR || errno == EAGAIN)
+ continue;
+ return -1;
+ }
+ if (!w)
+ return 0;
+ len -= w; buf += w; t += w;
+ }
+ return t;
+}
+
+static int process_frames(int dev, int sock, int fd, unsigned long flags)
+{
+ struct cmsghdr *cmsg;
+ struct msghdr msg;
+ struct iovec iv;
+ struct hcidump_hdr *dh;
+ struct btsnoop_pkt *dp;
+ struct frame frm;
+ struct pollfd fds[2];
+ int nfds = 0;
+ char *buf, *ctrl;
+ int len, hdr_size = HCIDUMP_HDR_SIZE;
+
+ if (sock < 0)
+ return -1;
+
+ if (mode == SERVER)
+ flags |= DUMP_BTSNOOP;
+
+ if (snap_len < SNAP_LEN)
+ snap_len = SNAP_LEN;
+
+ if (flags & DUMP_BTSNOOP)
+ hdr_size = BTSNOOP_PKT_SIZE;
+
+ buf = malloc(snap_len + hdr_size);
+ if (!buf) {
+ perror("Can't allocate data buffer");
+ return -1;
+ }
+
+ dh = (void *) buf;
+ dp = (void *) buf;
+ frm.data = buf + hdr_size;
+
+ ctrl = malloc(100);
+ if (!ctrl) {
+ free(buf);
+ perror("Can't allocate control buffer");
+ return -1;
+ }
+
+ if (dev == HCI_DEV_NONE)
+ printf("system: ");
+ else
+ printf("device: hci%d ", dev);
+
+ printf("snap_len: %d filter: 0x%lx\n", snap_len, parser.filter);
+
+ memset(&msg, 0, sizeof(msg));
+
+ if (mode == SERVER) {
+ struct btsnoop_hdr *hdr = (void *) buf;
+
+ btsnoop_version = 1;
+ btsnoop_type = 1002;
+
+ memcpy(hdr->id, btsnoop_id, sizeof(btsnoop_id));
+ hdr->version = htonl(btsnoop_version);
+ hdr->type = htonl(btsnoop_type);
+
+ printf("btsnoop version: %d datalink type: %d\n",
+ btsnoop_version, btsnoop_type);
+
+ len = write(fd, buf, BTSNOOP_HDR_SIZE);
+ if (len < 0) {
+ perror("Can't create dump header");
+ return -1;
+ }
+
+ if (len != BTSNOOP_HDR_SIZE) {
+ fprintf(stderr, "Header size mismatch\n");
+ return -1;
+ }
+
+ fds[nfds].fd = fd;
+ fds[nfds].events = POLLIN;
+ fds[nfds].revents = 0;
+ nfds++;
+ }
+
+ fds[nfds].fd = sock;
+ fds[nfds].events = POLLIN;
+ fds[nfds].revents = 0;
+ nfds++;
+
+ while (1) {
+ int i, n = poll(fds, nfds, -1);
+ if (n <= 0)
+ continue;
+
+ for (i = 0; i < nfds; i++) {
+ if (fds[i].revents & (POLLHUP | POLLERR | POLLNVAL)) {
+ if (fds[i].fd == sock)
+ printf("device: disconnected\n");
+ else
+ printf("client: disconnect\n");
+ return 0;
+ }
+ }
+
+ if (mode == SERVER) {
+ len = recv(fd, buf, snap_len, MSG_DONTWAIT);
+ if (len == 0) {
+ printf("client: disconnect\n");
+ return 0;
+ }
+ if (len < 0 && errno != EAGAIN && errno != EINTR) {
+ perror("Connection read failure");
+ return -1;
+ }
+ }
+
+ iv.iov_base = frm.data;
+ iv.iov_len = snap_len;
+
+ msg.msg_iov = &iv;
+ msg.msg_iovlen = 1;
+ msg.msg_control = ctrl;
+ msg.msg_controllen = 100;
+
+ len = recvmsg(sock, &msg, MSG_DONTWAIT);
+ if (len < 0) {
+ if (errno == EAGAIN || errno == EINTR)
+ continue;
+ perror("Receive failed");
+ return -1;
+ }
+
+ /* Process control message */
+ frm.data_len = len;
+ frm.dev_id = dev;
+ frm.in = 0;
+ frm.pppdump_fd = parser.pppdump_fd;
+ frm.audio_fd = parser.audio_fd;
+
+ cmsg = CMSG_FIRSTHDR(&msg);
+ while (cmsg) {
+ switch (cmsg->cmsg_type) {
+ case HCI_CMSG_DIR:
+ frm.in = *((int *) CMSG_DATA(cmsg));
+ break;
+ case HCI_CMSG_TSTAMP:
+ frm.ts = *((struct timeval *) CMSG_DATA(cmsg));
+ break;
+ }
+ cmsg = CMSG_NXTHDR(&msg, cmsg);
+ }
+
+ frm.ptr = frm.data;
+ frm.len = frm.data_len;
+
+ switch (mode) {
+ case WRITE:
+ case SEND:
+ case SERVER:
+ /* Save or send dump */
+ if (flags & DUMP_BTSNOOP) {
+ uint64_t ts;
+ uint8_t pkt_type = ((uint8_t *) frm.data)[0];
+ dp->size = htonl(frm.data_len);
+ dp->len = dp->size;
+ dp->flags = ntohl(frm.in & 0x01);
+ dp->drops = 0;
+ ts = (frm.ts.tv_sec - 946684800ll) * 1000000ll + frm.ts.tv_usec;
+ dp->ts = hton64(ts + 0x00E03AB44A676000ll);
+ if (pkt_type == HCI_COMMAND_PKT ||
+ pkt_type == HCI_EVENT_PKT)
+ dp->flags |= ntohl(0x02);
+ } else {
+ dh->len = htobs(frm.data_len);
+ dh->in = frm.in;
+ dh->ts_sec = htobl(frm.ts.tv_sec);
+ dh->ts_usec = htobl(frm.ts.tv_usec);
+ }
+
+ if (write_n(fd, buf, frm.data_len + hdr_size) < 0) {
+ perror("Write error");
+ return -1;
+ }
+ break;
+
+ default:
+ /* Parse and print */
+ parse(&frm);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+static void read_dump(int fd)
+{
+ struct hcidump_hdr dh;
+ struct btsnoop_pkt dp;
+ struct pktlog_hdr ph;
+ struct frame frm;
+ uint8_t pkt_type;
+ int err;
+
+ frm.data = malloc(HCI_MAX_FRAME_SIZE);
+ if (!frm.data) {
+ perror("Can't allocate data buffer");
+ exit(1);
+ }
+
+ while (1) {
+ if (parser.flags & DUMP_PKTLOG)
+ err = read_n(fd, (void *) &ph, PKTLOG_HDR_SIZE);
+ else if (parser.flags & DUMP_BTSNOOP)
+ err = read_n(fd, (void *) &dp, BTSNOOP_PKT_SIZE);
+ else
+ err = read_n(fd, (void *) &dh, HCIDUMP_HDR_SIZE);
+
+ if (err < 0)
+ goto failed;
+ if (!err)
+ return;
+
+ if (parser.flags & DUMP_PKTLOG) {
+ switch (ph.type) {
+ case 0x00:
+ ((uint8_t *) frm.data)[0] = HCI_COMMAND_PKT;
+ frm.in = 0;
+ break;
+ case 0x01:
+ ((uint8_t *) frm.data)[0] = HCI_EVENT_PKT;
+ frm.in = 1;
+ break;
+ case 0x02:
+ ((uint8_t *) frm.data)[0] = HCI_ACLDATA_PKT;
+ frm.in = 0;
+ break;
+ case 0x03:
+ ((uint8_t *) frm.data)[0] = HCI_ACLDATA_PKT;
+ frm.in = 1;
+ break;
+ default:
+ lseek(fd, ntohl(ph.len) - 9, SEEK_CUR);
+ continue;
+ }
+
+ frm.data_len = ntohl(ph.len) - 8;
+ err = read_n(fd, frm.data + 1, frm.data_len - 1);
+ } else if (parser.flags & DUMP_BTSNOOP) {
+ switch (btsnoop_type) {
+ case 1001:
+ if (ntohl(dp.flags) & 0x02) {
+ if (ntohl(dp.flags) & 0x01)
+ pkt_type = HCI_EVENT_PKT;
+ else
+ pkt_type = HCI_COMMAND_PKT;
+ } else
+ pkt_type = HCI_ACLDATA_PKT;
+
+ ((uint8_t *) frm.data)[0] = pkt_type;
+
+ frm.data_len = ntohl(dp.len) + 1;
+ err = read_n(fd, frm.data + 1, frm.data_len - 1);
+ break;
+
+ case 1002:
+ frm.data_len = ntohl(dp.len);
+ err = read_n(fd, frm.data, frm.data_len);
+ break;
+ }
+ } else {
+ frm.data_len = btohs(dh.len);
+ err = read_n(fd, frm.data, frm.data_len);
+ }
+
+ if (err < 0)
+ goto failed;
+ if (!err)
+ return;
+
+ frm.ptr = frm.data;
+ frm.len = frm.data_len;
+
+ if (parser.flags & DUMP_PKTLOG) {
+ uint64_t ts;
+ ts = ntoh64(ph.ts);
+ frm.ts.tv_sec = ts >> 32;
+ frm.ts.tv_usec = ts & 0xffffffff;
+ } else if (parser.flags & DUMP_BTSNOOP) {
+ uint64_t ts;
+ frm.in = ntohl(dp.flags) & 0x01;
+ ts = ntoh64(dp.ts) - 0x00E03AB44A676000ll;
+ frm.ts.tv_sec = (ts / 1000000ll) + 946684800ll;
+ frm.ts.tv_usec = ts % 1000000ll;
+ } else {
+ frm.in = dh.in;
+ frm.ts.tv_sec = btohl(dh.ts_sec);
+ frm.ts.tv_usec = btohl(dh.ts_usec);
+ }
+
+ parse(&frm);
+ }
+
+failed:
+ perror("Read failed");
+ exit(1);
+}
+
+static int open_file(char *file, int mode, unsigned long flags)
+{
+ unsigned char buf[BTSNOOP_HDR_SIZE];
+ struct btsnoop_hdr *hdr = (struct btsnoop_hdr *) buf;
+ int fd, len, open_flags;
+
+ if (mode == WRITE || mode == PPPDUMP || mode == AUDIO) {
+ if (noappend || flags & DUMP_BTSNOOP)
+ open_flags = O_WRONLY | O_CREAT | O_TRUNC;
+ else
+ open_flags = O_WRONLY | O_CREAT | O_APPEND;
+ } else
+ open_flags = O_RDONLY;
+
+ fd = open(file, open_flags, S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH);
+ if (fd < 0) {
+ perror("Can't open dump file");
+ exit(1);
+ }
+
+ if (mode == READ) {
+ len = read(fd, buf, BTSNOOP_HDR_SIZE);
+ if (len != BTSNOOP_HDR_SIZE) {
+ lseek(fd, 0, SEEK_SET);
+ return fd;
+ }
+
+ if (!memcmp(hdr->id, btsnoop_id, sizeof(btsnoop_id))) {
+ parser.flags |= DUMP_BTSNOOP;
+
+ btsnoop_version = ntohl(hdr->version);
+ btsnoop_type = ntohl(hdr->type);
+
+ printf("btsnoop version: %d datalink type: %d\n",
+ btsnoop_version, btsnoop_type);
+
+ if (btsnoop_version != 1) {
+ fprintf(stderr, "Unsupported BTSnoop version\n");
+ exit(1);
+ }
+
+ if (btsnoop_type != 1001 && btsnoop_type != 1002) {
+ fprintf(stderr, "Unsupported BTSnoop datalink type\n");
+ exit(1);
+ }
+ } else {
+ if (buf[0] == 0x00 && buf[1] == 0x00) {
+ parser.flags |= DUMP_PKTLOG;
+ printf("packet logger data format\n");
+ }
+
+ parser.flags &= ~DUMP_BTSNOOP;
+ lseek(fd, 0, SEEK_SET);
+ return fd;
+ }
+ } else {
+ if (flags & DUMP_BTSNOOP) {
+ btsnoop_version = 1;
+ btsnoop_type = 1002;
+
+ memcpy(hdr->id, btsnoop_id, sizeof(btsnoop_id));
+ hdr->version = htonl(btsnoop_version);
+ hdr->type = htonl(btsnoop_type);
+
+ printf("btsnoop version: %d datalink type: %d\n",
+ btsnoop_version, btsnoop_type);
+
+ len = write(fd, buf, BTSNOOP_HDR_SIZE);
+ if (len < 0) {
+ perror("Can't create dump header");
+ exit(1);
+ }
+
+ if (len != BTSNOOP_HDR_SIZE) {
+ fprintf(stderr, "Header size mismatch\n");
+ exit(1);
+ }
+ }
+ }
+
+ return fd;
+}
+
+static int open_socket(int dev, unsigned long flags)
+{
+ struct sockaddr_hci addr;
+ struct hci_filter flt;
+ struct hci_dev_info di;
+ int sk, dd, opt;
+
+ if (permcheck && dev != HCI_DEV_NONE) {
+ dd = hci_open_dev(dev);
+ if (dd < 0) {
+ perror("Can't open device");
+ return -1;
+ }
+
+ if (hci_devinfo(dev, &di) < 0) {
+ perror("Can't get device info");
+ return -1;
+ }
+
+ opt = hci_test_bit(HCI_RAW, &di.flags);
+ if (ioctl(dd, HCISETRAW, opt) < 0) {
+ if (errno == EACCES) {
+ perror("Can't access device");
+ return -1;
+ }
+ }
+
+ hci_close_dev(dd);
+ }
+
+ /* Create HCI socket */
+ sk = socket(AF_BLUETOOTH, SOCK_RAW, BTPROTO_HCI);
+ if (sk < 0) {
+ perror("Can't create raw socket");
+ return -1;
+ }
+
+ opt = 1;
+ if (setsockopt(sk, SOL_HCI, HCI_DATA_DIR, &opt, sizeof(opt)) < 0) {
+ perror("Can't enable data direction info");
+ return -1;
+ }
+
+ opt = 1;
+ if (setsockopt(sk, SOL_HCI, HCI_TIME_STAMP, &opt, sizeof(opt)) < 0) {
+ perror("Can't enable time stamp");
+ return -1;
+ }
+
+ /* Setup filter */
+ hci_filter_clear(&flt);
+ hci_filter_all_ptypes(&flt);
+ hci_filter_all_events(&flt);
+ if (setsockopt(sk, SOL_HCI, HCI_FILTER, &flt, sizeof(flt)) < 0) {
+ perror("Can't set filter");
+ return -1;
+ }
+
+ /* Bind socket to the HCI device */
+ addr.hci_family = AF_BLUETOOTH;
+ addr.hci_dev = dev;
+ if (bind(sk, (struct sockaddr *) &addr, sizeof(addr)) < 0) {
+ printf("Can't attach to device hci%d. %s(%d)\n",
+ dev, strerror(errno), errno);
+ return -1;
+ }
+
+ return sk;
+}
+
+static int open_connection(char *addr, char *port)
+{
+ struct sockaddr_storage ss;
+ struct addrinfo hints, *res0, *res;
+ int sk = -1, opt = 1;
+
+ memset(&hints, 0, sizeof(hints));
+ hints.ai_family = af;
+ hints.ai_socktype = SOCK_STREAM;
+ hints.ai_protocol = IPPROTO_TCP;
+
+ if (getaddrinfo(addr, port, &hints, &res0))
+ if(getaddrinfo(NULL, port, &hints, &res0)) {
+ perror("getaddrinfo");
+ exit(1);
+ }
+
+ for (res = res0; res; res = res->ai_next) {
+ sk = socket(res->ai_family, res->ai_socktype, res->ai_protocol);
+ if (sk < 0) {
+ if (res->ai_next)
+ continue;
+
+ perror("Can't create socket");
+ freeaddrinfo(res0);
+ exit(1);
+ }
+
+ setsockopt(sk, SOL_SOCKET, SO_REUSEADDR, &opt, sizeof(opt));
+
+ memcpy(&ss, res->ai_addr, res->ai_addrlen);
+
+ switch(ss.ss_family) {
+ case AF_INET:
+ ((struct sockaddr_in *) &ss)->sin_addr.s_addr = htonl(INADDR_ANY);
+ ((struct sockaddr_in *) &ss)->sin_port = 0;
+ break;
+ }
+
+ if (bind(sk, (struct sockaddr *) &ss, sizeof(ss)) < 0) {
+ perror("Can't bind socket");
+ close(sk);
+ freeaddrinfo(res0);
+ exit(1);
+ }
+
+ if (connect(sk, res->ai_addr, res->ai_addrlen) < 0) {
+ perror("Can't connect socket");
+ close(sk);
+ freeaddrinfo(res0);
+ exit(1);
+ }
+ }
+
+ freeaddrinfo(res0);
+
+ return sk;
+}
+
+static int create_datagram(unsigned short port)
+{
+ struct sockaddr_in addr;
+ int sk, opt = 1;
+
+ sk = socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP);
+ if (sk < 0)
+ return -1;
+
+ if (setsockopt(sk, SOL_SOCKET, SO_REUSEADDR, &opt, sizeof(opt)) < 0) {
+ close(sk);
+ return -1;
+ }
+
+ memset(&addr, 0, sizeof(addr));
+ addr.sin_family = AF_INET;
+ addr.sin_port = htons(port);
+ addr.sin_addr.s_addr = htonl(INADDR_BROADCAST);
+
+ if (bind(sk, (struct sockaddr *) &addr, sizeof(addr)) < 0) {
+ close(sk);
+ return -1;
+ }
+
+ return sk;
+}
+
+static unsigned char ping_data[] = { 'p', 'i', 'n', 'g' };
+static unsigned char pong_data[] = { 'p', 'o', 'n', 'g' };
+
+static void handle_datagram(int sk)
+{
+ struct sockaddr_in addr;
+ socklen_t addr_len = sizeof(addr);
+ unsigned char buf[64];
+ ssize_t len;
+
+ len = recvfrom(sk, buf, sizeof(buf), MSG_DONTWAIT,
+ (struct sockaddr *) &addr, &addr_len);
+
+ if (len != sizeof(ping_data))
+ return;
+
+ if (memcmp(buf, ping_data, sizeof(ping_data)) != 0)
+ return;
+
+ len = sendto(sk, pong_data, sizeof(pong_data), 0,
+ (struct sockaddr *) &addr, sizeof(addr));
+}
+
+static int wait_connection(char *addr, char *port)
+{
+ char hname[100], hport[10];
+ struct addrinfo *ai, *runp;
+ struct addrinfo hints;
+ struct pollfd fds[3];
+ int err, opt, datagram, nfds = 0;
+
+ memset(&hints, 0, sizeof (hints));
+ hints.ai_flags = AI_PASSIVE | AI_ADDRCONFIG;
+ hints.ai_socktype = SOCK_STREAM;
+ hints.ai_protocol = IPPROTO_TCP;
+
+ err = getaddrinfo(dump_addr, dump_port, &hints, &ai);
+ if (err < 0) {
+ printf("Can't get address info: %s\n", gai_strerror(err));
+ return -1;
+ }
+
+ runp = ai;
+
+ datagram = create_datagram(atoi(dump_port));
+ if (datagram < 0) {
+ printf("server: no discover protocol\n");
+ } else {
+ fds[nfds].fd = datagram;
+ fds[nfds].events = POLLIN;
+ nfds++;
+ }
+
+ while (runp != NULL && nfds < sizeof(fds) / sizeof(fds[0])) {
+ fds[nfds].fd = socket(runp->ai_family, runp->ai_socktype,
+ runp->ai_protocol);
+ if (fds[nfds].fd < 0) {
+ perror("Can't create socket");
+ return -1;
+ }
+
+ fds[nfds].events = POLLIN;
+
+ opt = 1;
+ setsockopt(fds[nfds].fd, SOL_SOCKET, SO_REUSEADDR,
+ &opt, sizeof(opt));
+
+ opt = 0;
+ setsockopt(fds[nfds].fd, SOL_SOCKET, SO_KEEPALIVE,
+ &opt, sizeof(opt));
+
+ if (bind(fds[nfds].fd, runp->ai_addr, runp->ai_addrlen) < 0) {
+ if (errno != EADDRINUSE) {
+ perror("Can't bind socket");
+ return -1;
+ }
+
+ close(fds[nfds].fd);
+ } else {
+ if (listen(fds[nfds].fd, SOMAXCONN) < 0) {
+ perror("Can't listen on socket");
+ return -1;
+ }
+
+ getnameinfo(runp->ai_addr, runp->ai_addrlen,
+ hname, sizeof(hname),
+ hport, sizeof(hport),
+ NI_NUMERICSERV);
+
+ printf("server: %s:%s snap_len: %d filter: 0x%lx\n",
+ hname, hport, snap_len, parser.filter);
+
+ nfds++;
+ }
+
+ runp = runp->ai_next;
+ }
+
+ freeaddrinfo(ai);
+
+ while (1) {
+ int i, n = poll(fds, nfds, -1);
+ if (n <= 0)
+ continue;
+
+ for (i = 0; i < nfds; i++) {
+ struct sockaddr_storage rem;
+ socklen_t remlen = sizeof(rem);
+ int sk;
+
+ if (!(fds[i].revents & POLLIN))
+ continue;
+
+ if (fds[i].fd == datagram) {
+ handle_datagram(datagram);
+ continue;
+ }
+
+ sk = accept(fds[i].fd, (struct sockaddr *) &rem, &remlen);
+ if (sk < 0)
+ continue;
+
+ getnameinfo((struct sockaddr *) &rem, remlen,
+ hname, sizeof(hname),
+ hport, sizeof(hport),
+ NI_NUMERICSERV);
+
+ printf("client: %s:%s snap_len: %d filter: 0x%lx\n",
+ hname, hport, snap_len, parser.filter);
+
+ for (n = 0; n < nfds; n++)
+ close(fds[n].fd);
+
+ return sk;
+ }
+ }
+
+ return -1;
+}
+
+static int run_server(int dev, char *addr, char *port, unsigned long flags)
+{
+ while (1) {
+ int dd, sk;
+
+ sk = wait_connection(addr, port);
+ if (sk < 0)
+ continue;
+
+ //fcntl(sk, F_SETFL, O_NONBLOCK);
+
+ dd = open_socket(dev, flags);
+ if (dd < 0) {
+ close(sk);
+ continue;
+ }
+
+ process_frames(dev, dd, sk, flags);
+
+ close(dd);
+ close(sk);
+ }
+
+ return 0;
+}
+
+static struct {
+ char *name;
+ int flag;
+} filters[] = {
+ { "lmp", FILT_LMP },
+ { "hci", FILT_HCI },
+ { "sco", FILT_SCO },
+ { "l2cap", FILT_L2CAP },
+ { "rfcomm", FILT_RFCOMM },
+ { "sdp", FILT_SDP },
+ { "bnep", FILT_BNEP },
+ { "cmtp", FILT_CMTP },
+ { "hidp", FILT_HIDP },
+ { "hcrp", FILT_HCRP },
+ { "avdtp", FILT_AVDTP },
+ { "avctp", FILT_AVCTP },
+ { "obex", FILT_OBEX },
+ { "capi", FILT_CAPI },
+ { "ppp", FILT_PPP },
+ { "csr", FILT_CSR },
+ { "dga", FILT_DGA },
+ { 0 }
+};
+
+static unsigned long parse_filter(int argc, char **argv)
+{
+ unsigned long filter = 0;
+ int i,n;
+
+ for (i = 0; i < argc; i++) {
+ for (n = 0; filters[n].name; n++) {
+ if (!strcasecmp(filters[n].name, argv[i])) {
+ filter |= filters[n].flag;
+ break;
+ }
+ }
+ }
+
+ return filter;
+}
+
+static void usage(void)
+{
+ printf(
+ "Usage: hcidump [OPTION...] [filter]\n"
+ " -i, --device=hci_dev HCI device\n"
+ " -l, --snap-len=len Snap len (in bytes)\n"
+ " -p, --psm=psm Default PSM\n"
+ " -m, --manufacturer=compid Default manufacturer\n"
+ " -w, --save-dump=file Save dump to a file\n"
+ " -r, --read-dump=file Read dump from a file\n"
+ " -s, --send-dump=host Send dump to a host\n"
+ " -n, --recv-dump=host Receive dump on a host\n"
+ " -d, --wait-dump=host Wait on a host and send\n"
+ " -t, --ts Display time stamps\n"
+ " -a, --ascii Dump data in ascii\n"
+ " -x, --hex Dump data in hex\n"
+ " -X, --ext Dump data in hex and ascii\n"
+ " -R, --raw Dump raw data\n"
+ " -C, --cmtp=psm PSM for CMTP\n"
+ " -H, --hcrp=psm PSM for HCRP\n"
+ " -O, --obex=channel Channel for OBEX\n"
+ " -P, --ppp=channel Channel for PPP\n"
+ " -D, --pppdump=file Extract PPP traffic\n"
+ " -A, --audio=file Extract SCO audio data\n"
+ " -B, --btsnoop Use BTSnoop file format\n"
+ " -V, --verbose Verbose decoding\n"
+ " -Y, --novendor No vendor commands or events\n"
+ " -N, --noappend No appending to existing files\n"
+ " -4, --ipv4 Use IPv4 as transport\n"
+ " -6 --ipv6 Use IPv6 as transport\n"
+ " -h, --help Give this help list\n"
+ " --usage Give a short usage message\n"
+ );
+}
+
+static struct option main_options[] = {
+ { "device", 1, 0, 'i' },
+ { "snap-len", 1, 0, 'l' },
+ { "psm", 1, 0, 'p' },
+ { "manufacturer", 1, 0, 'm' },
+ { "save-dump", 1, 0, 'w' },
+ { "read-dump", 1, 0, 'r' },
+ { "send-dump", 1, 0, 's' },
+ { "recv-dump", 1, 0, 'n' },
+ { "wait-dump", 1, 0, 'd' },
+ { "timestamp", 0, 0, 't' },
+ { "ascii", 0, 0, 'a' },
+ { "hex", 0, 0, 'x' },
+ { "ext", 0, 0, 'X' },
+ { "raw", 0, 0, 'R' },
+ { "cmtp", 1, 0, 'C' },
+ { "hcrp", 1, 0, 'H' },
+ { "obex", 1, 0, 'O' },
+ { "ppp", 1, 0, 'P' },
+ { "pppdump", 1, 0, 'D' },
+ { "audio", 1, 0, 'A' },
+ { "btsnoop", 0, 0, 'B' },
+ { "verbose", 0, 0, 'V' },
+ { "novendor", 0, 0, 'Y' },
+ { "nopermcheck", 0, 0, 'Z' },
+ { "noappend", 0, 0, 'N' },
+ { "ipv4", 0, 0, '4' },
+ { "ipv6", 0, 0, '6' },
+ { "help", 0, 0, 'h' },
+ { 0 }
+};
+
+int main(int argc, char *argv[])
+{
+ unsigned long flags = 0;
+ unsigned long filter = 0;
+ int device = 0;
+ int defpsm = 0;
+ int defcompid = DEFAULT_COMPID;
+ int opt, pppdump_fd = -1, audio_fd = -1;
+
+ printf("HCI sniffer - Bluetooth packet analyzer ver %s\n", VERSION);
+
+ while ((opt=getopt_long(argc, argv, "i:l:p:m:w:r:s:n:d:taxXRC:H:O:P:D:A:BVYZN46h", main_options, NULL)) != -1) {
+ switch(opt) {
+ case 'i':
+ if (strcasecmp(optarg, "none") && strcasecmp(optarg, "system"))
+ device = atoi(optarg + 3);
+ else
+ device = HCI_DEV_NONE;
+ break;
+
+ case 'l':
+ snap_len = atoi(optarg);
+ break;
+
+ case 'p':
+ defpsm = atoi(optarg);
+ break;
+
+ case 'm':
+ defcompid = atoi(optarg);
+ break;
+
+ case 'w':
+ mode = WRITE;
+ dump_file = strdup(optarg);
+ break;
+
+ case 'r':
+ mode = READ;
+ dump_file = strdup(optarg);
+ break;
+
+ case 's':
+ mode = SEND;
+ dump_addr = optarg;
+ break;
+
+ case 'n':
+ mode = RECEIVE;
+ dump_addr = optarg;
+ break;
+
+ case 'd':
+ mode = SERVER;
+ dump_addr = optarg;
+ break;
+
+ case 't':
+ flags |= DUMP_TSTAMP;
+ break;
+
+ case 'a':
+ flags |= DUMP_ASCII;
+ break;
+
+ case 'x':
+ flags |= DUMP_HEX;
+ break;
+
+ case 'X':
+ flags |= DUMP_EXT;
+ break;
+
+ case 'R':
+ flags |= DUMP_RAW;
+ break;
+
+ case 'C':
+ set_proto(0, atoi(optarg), 0, SDP_UUID_CMTP);
+ break;
+
+ case 'H':
+ set_proto(0, atoi(optarg), 0, SDP_UUID_HARDCOPY_CONTROL_CHANNEL);
+ break;
+
+ case 'O':
+ set_proto(0, 0, atoi(optarg), SDP_UUID_OBEX);
+ break;
+
+ case 'P':
+ set_proto(0, 0, atoi(optarg), SDP_UUID_LAN_ACCESS_PPP);
+ break;
+
+ case 'D':
+ pppdump_file = strdup(optarg);
+ break;
+
+ case 'A':
+ audio_file = strdup(optarg);
+ break;
+
+ case 'B':
+ flags |= DUMP_BTSNOOP;
+ break;
+
+ case 'V':
+ flags |= DUMP_VERBOSE;
+ break;
+
+ case 'Y':
+ flags |= DUMP_NOVENDOR;
+ break;
+
+ case 'Z':
+ permcheck = 0;
+ break;
+
+ case 'N':
+ noappend = 1;
+ break;
+
+ case '4':
+ af = AF_INET;
+ break;
+
+ case '6':
+ af = AF_INET6;
+ break;
+
+ case 'h':
+ default:
+ usage();
+ exit(0);
+ }
+ }
+
+ argc -= optind;
+ argv += optind;
+ optind = 0;
+
+ if (argc > 0)
+ filter = parse_filter(argc, argv);
+
+ /* Default settings */
+ if (!filter)
+ filter = ~0L;
+
+ if (pppdump_file)
+ pppdump_fd = open_file(pppdump_file, PPPDUMP, flags);
+
+ if (audio_file)
+ audio_fd = open_file(audio_file, AUDIO, flags);
+
+ switch (mode) {
+ case PARSE:
+ init_parser(flags, filter, defpsm, defcompid, pppdump_fd, audio_fd);
+ process_frames(device, open_socket(device, flags), -1, flags);
+ break;
+
+ case READ:
+ init_parser(flags, filter, defpsm, defcompid, pppdump_fd, audio_fd);
+ read_dump(open_file(dump_file, mode, flags));
+ break;
+
+ case WRITE:
+ process_frames(device, open_socket(device, flags),
+ open_file(dump_file, mode, flags), flags);
+ break;
+
+ case RECEIVE:
+ init_parser(flags, filter, defpsm, defcompid, pppdump_fd, audio_fd);
+ read_dump(wait_connection(dump_addr, dump_port));
+ break;
+
+ case SEND:
+ process_frames(device, open_socket(device, flags),
+ open_connection(dump_addr, dump_port), flags);
+ break;
+
+ case SERVER:
+ init_parser(flags, filter, defpsm, defcompid, pppdump_fd, audio_fd);
+ run_server(device, dump_addr, dump_port, flags);
+ break;
+ }
+
+ return 0;
+}
--- /dev/null
+
+#------------------------------------------------------------------------------
+# BTSnoop: file(1) magic for BTSnoop files
+#
+# From <marcel@holtmann.org>
+0 string btsnoop\0 BTSnoop
+>8 belong x version %d,
+>12 belong 1001 Unencapsulated HCI
+>12 belong 1002 HCI UART (H4)
+>12 belong 1003 HCI BCSP
+>12 belong 1004 HCI Serial (H5)
+>>12 belong x type %d
-# Note: this currently does not build due to a dependency on
-# libhciserver, which the Android build of bluez-utils/hcid
-# does not produce.
-
-BUILD_HEADSETD:=0
-ifeq ($(BUILD_HEADSETD),1)
-
LOCAL_PATH:= $(call my-dir)
-#
-# headsetd
-#
+# A2DP plugin
include $(CLEAR_VARS)
-LOCAL_C_INCLUDES:= \
- $(call include-path-for, bluez-libs) \
- $(call include-path-for, dbus) \
- $(call include-path-for, bluez-utils)/common \
- $(call include-path-for, bluez-utils)/sdpd \
- $(call include-path-for, bluez-utils)/eglib \
- $(call include-path-for, bluez-utils)/gdbus
-
-LOCAL_CFLAGS:= \
- -DVERSION=\"3.36\" \
- -DSTORAGEDIR=\"/data\" \
- -DCONFIGDIR=\"/etc\" \
- -DENABLE_DEBUG \
- -D__S_IFREG=0100000 # missing from bionic stat.h
-
LOCAL_SRC_FILES:= \
a2dp.c \
avdtp.c \
device.c \
headset.c \
ipc.c \
- sink.c \
- unix.c \
+ main.c \
manager.c \
+ sink.c \
+ unix.c
+
+LOCAL_CFLAGS:= \
+ -DVERSION=\"3.36\" \
+ -DSTORAGEDIR=\"/data/misc/hcid\" \
+ -DCONFIGDIR=\"/etc/bluez\" \
+ -D__S_IFREG=0100000 # missing from bionic stat.h
+
+LOCAL_C_INCLUDES:= \
+ $(call include-path-for, bluez-libs) \
+ $(call include-path-for, bluez-utils)/common \
+ $(call include-path-for, bluez-utils)/hcid \
+ $(call include-path-for, bluez-utils)/sdpd \
+ $(call include-path-for, bluez-utils)/eglib \
+ $(call include-path-for, bluez-utils)/gdbus \
+ $(call include-path-for, dbus)
LOCAL_SHARED_LIBRARIES := \
libbluetooth \
+ libhcid \
libdbus
-LOCAL_STATIC_LIBRARIES := \
- libbluez-utils-common-static \
- libeglib_static \
- libsdpserver_static \
- libgdbus_static
+LOCAL_MODULE_PATH := $(TARGET_OUT_SHARED_LIBRARIES)/bluez-plugin
+LOCAL_UNSTRIPPED_PATH := $(TARGET_OUT_SHARED_LIBRARIES_UNSTRIPPED)/bluez-plugin
+LOCAL_MODULE := audio
+
+include $(BUILD_SHARED_LIBRARY)
-LOCAL_MODULE:=headsetd
+# liba2sp
+
+include $(CLEAR_VARS)
+
+LOCAL_SRC_FILES:= \
+ liba2dp.c \
+ ipc.c \
+ ../sbc/sbc.c.arm
+
+LOCAL_C_INCLUDES:= \
+ $(call include-path-for, bluez-libs) \
+ $(call include-path-for, bluez-utils)/common \
+ $(call include-path-for, bluez-utils)/hcid \
+ $(call include-path-for, bluez-utils)/sdpd \
+ $(call include-path-for, bluez-utils)/eglib \
+ $(call include-path-for, bluez-utils)/gdbus \
+ $(call include-path-for, bluez-utils)/sbc \
+ $(call include-path-for, dbus)
+
+LOCAL_SHARED_LIBRARIES := \
+ libbluetooth \
+ libhcid \
+ libdbus \
+ libcutils
-include $(BUILD_EXECUTABLE)
+LOCAL_MODULE := liba2dp
-endif
+include $(BUILD_SHARED_LIBRARY)
GSList *l;
struct stream_callback *cb;
+ if (!stream)
+ return FALSE;
+
for (cb = NULL, l = stream->callbacks; l != NULL; l = l->next) {
struct stream_callback *tmp = l->data;
if (tmp->id == id) {
static uint32_t ct_record_id = 0;
static GIOChannel *avctp_server = NULL;
-
+static gchar *input_device_name = NULL;
static GSList *sessions = NULL;
typedef enum {
static void init_uinput(struct avctp *session)
{
char address[18], *name;
+ GError *err = NULL;
ba2str(&session->dst, address);
- name = session->dev->name ? session->dev->name : address;
+ /* use device name from config file if specified */
+ name = input_device_name;
+ if (!name)
+ name = session->dev->name ? session->dev->name : address;
session->uinput = uinput_create(name);
if (session->uinput < 0)
if (err) {
debug("audio.conf: %s", err->message);
g_error_free(err);
+ err = NULL;
} else
master = tmp;
+
+ input_device_name = g_key_file_get_string(config,
+ "AVRCP", "InputDeviceName", &err);
+ if (err) {
+ debug("InputDeviceName not specified in audio.conf");
+ input_device_name = NULL;
+ g_error_free(err);
+ }
}
connection = dbus_connection_ref(conn);
--- /dev/null
+/*
+ *
+ * BlueZ - Bluetooth protocol stack for Linux
+ *
+ * Copyright (C) 2006-2007 Nokia Corporation
+ * Copyright (C) 2004-2008 Marcel Holtmann <marcel@holtmann.org>
+ *
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include <stdint.h>
+#include <sys/socket.h>
+#include <sys/un.h>
+#include <time.h>
+#include <sys/time.h>
+#include <signal.h>
+#include <limits.h>
+#include <fcntl.h>
+#include <unistd.h>
+
+#include <netinet/in.h>
+#include <sys/poll.h>
+
+#include "ipc.h"
+#include "sbc.h"
+#include "rtp.h"
+#include "liba2dp.h"
+
+#define LOG_TAG "A2DP"
+#include <utils/Log.h>
+
+// #define ENABLE_DEBUG
+
+#define BUFFER_SIZE 2048
+
+#ifdef ENABLE_DEBUG
+#define DBG LOGD
+#else
+#define DBG(fmt, arg...)
+#endif
+
+
+#ifndef MIN
+# define MIN(x, y) ((x) < (y) ? (x) : (y))
+#endif
+
+#ifndef MAX
+# define MAX(x, y) ((x) > (y) ? (x) : (y))
+#endif
+
+#define MAX_BITPOOL 64
+#define MIN_BITPOOL 2
+
+#define SNDERR LOGE
+
+struct bluetooth_a2dp {
+ sbc_capabilities_t sbc_capabilities;
+ sbc_t sbc; /* Codec data */
+ int sbc_initialized; /* Keep track if the encoder is initialized */
+ int codesize; /* SBC codesize */
+ int samples; /* Number of encoded samples */
+ uint8_t buffer[BUFFER_SIZE]; /* Codec transfer buffer */
+ int count; /* Codec transfer buffer counter */
+
+ int nsamples; /* Cumulative number of codec samples */
+ uint16_t seq_num; /* Cumulative packet sequence */
+ int frame_count; /* Current frames in buffer*/
+};
+
+
+struct bluetooth_data {
+ volatile long hw_ptr;
+ int transport; /* chosen transport SCO or AD2P */
+ int link_mtu; /* MTU for selected transport channel */
+ volatile struct pollfd stream; /* Audio stream filedescriptor */
+ struct pollfd server; /* Audio daemon filedescriptor */
+ uint8_t buffer[BUFFER_SIZE]; /* Encoded transfer buffer */
+ int count; /* Transfer buffer counter */
+ struct bluetooth_a2dp a2dp; /* A2DP data */
+
+ sig_atomic_t reset; /* Request XRUN handling */
+
+ char address[20];
+};
+
+
+
+static int audioservice_send(int sk, const bt_audio_msg_header_t *msg);
+static int audioservice_expect(int sk, bt_audio_msg_header_t *outmsg,
+ int expected_type);
+
+
+static void bluetooth_exit(struct bluetooth_data *data)
+{
+ struct bluetooth_a2dp *a2dp = &data->a2dp;
+
+ if (data->server.fd >= 0)
+ bt_audio_service_close(data->server.fd);
+
+ if (data->stream.fd >= 0)
+ close(data->stream.fd);
+
+ if (a2dp->sbc_initialized)
+ sbc_finish(&a2dp->sbc);
+}
+
+static int bluetooth_prepare(struct bluetooth_data *data)
+{
+ char c = 'w';
+ char buf[BT_AUDIO_IPC_PACKET_SIZE];
+ struct bt_streamstart_req *start_req = (void*) buf;
+ bt_audio_rsp_msg_header_t *rsp_hdr = (void*) buf;
+ struct bt_streamfd_ind *streamfd_ind = (void*) buf;
+ int opt_name, err;
+ struct timeval t = { 100, 0 };
+ int buffer;
+
+ data->reset = 0;
+ data->hw_ptr = 0;
+
+ /* send start */
+ memset(start_req, 0, BT_AUDIO_IPC_PACKET_SIZE);
+ start_req->h.msg_type = BT_STREAMSTART_REQ;
+
+ err = audioservice_send(data->server.fd, &start_req->h);
+ if (err < 0)
+ return err;
+
+ err = audioservice_expect(data->server.fd, &rsp_hdr->msg_h,
+ BT_STREAMSTART_RSP);
+ if (err < 0)
+ return err;
+
+ if (rsp_hdr->posix_errno != 0) {
+ SNDERR("BT_START failed : %s(%d)",
+ strerror(rsp_hdr->posix_errno),
+ rsp_hdr->posix_errno);
+ return -rsp_hdr->posix_errno;
+ }
+
+ err = audioservice_expect(data->server.fd, &streamfd_ind->h,
+ BT_STREAMFD_IND);
+ if (err < 0)
+ return err;
+
+ if (data->stream.fd >= 0)
+ close(data->stream.fd);
+
+ data->stream.fd = bt_audio_service_get_data_fd(data->server.fd);
+ if (data->stream.fd < 0) {
+ return -errno;
+ }
+
+ if (setsockopt(data->stream.fd, SOL_SOCKET, SO_SNDTIMEO, &t, sizeof(t)) < 0)
+ return -errno;
+
+ /* disable buffering to reduce latency when pausing or changing volume */
+ buffer = 0;
+ if (setsockopt(data->stream.fd, SOL_SOCKET, SO_SNDBUF, &buffer, sizeof(buffer)) < 0)
+ return -errno;
+
+ return 0;
+}
+
+static uint8_t default_bitpool(uint8_t freq, uint8_t mode)
+{
+ switch (freq) {
+ case BT_SBC_SAMPLING_FREQ_16000:
+ case BT_SBC_SAMPLING_FREQ_32000:
+ return 53;
+ case BT_SBC_SAMPLING_FREQ_44100:
+ switch (mode) {
+ case BT_A2DP_CHANNEL_MODE_MONO:
+ case BT_A2DP_CHANNEL_MODE_DUAL_CHANNEL:
+ return 31;
+ case BT_A2DP_CHANNEL_MODE_STEREO:
+ case BT_A2DP_CHANNEL_MODE_JOINT_STEREO:
+ return 53;
+ default:
+ DBG("Invalid channel mode %u", mode);
+ return 53;
+ }
+ case BT_SBC_SAMPLING_FREQ_48000:
+ switch (mode) {
+ case BT_A2DP_CHANNEL_MODE_MONO:
+ case BT_A2DP_CHANNEL_MODE_DUAL_CHANNEL:
+ return 29;
+ case BT_A2DP_CHANNEL_MODE_STEREO:
+ case BT_A2DP_CHANNEL_MODE_JOINT_STEREO:
+ return 51;
+ default:
+ DBG("Invalid channel mode %u", mode);
+ return 51;
+ }
+ default:
+ DBG("Invalid sampling freq %u", freq);
+ return 53;
+ }
+}
+
+static int bluetooth_a2dp_init(struct bluetooth_data *data, int rate, int channels)
+{
+ sbc_capabilities_t *cap = &data->a2dp.sbc_capabilities;
+ unsigned int max_bitpool, min_bitpool;
+ int dir;
+
+ switch (rate) {
+ case 48000:
+ cap->frequency = BT_SBC_SAMPLING_FREQ_48000;
+ break;
+ case 44100:
+ cap->frequency = BT_SBC_SAMPLING_FREQ_44100;
+ break;
+ case 32000:
+ cap->frequency = BT_SBC_SAMPLING_FREQ_32000;
+ break;
+ case 16000:
+ cap->frequency = BT_SBC_SAMPLING_FREQ_16000;
+ break;
+ default:
+ DBG("Rate %d not supported", rate);
+ return -1;
+ }
+
+ if (channels == 2) {
+ if (cap->channel_mode & BT_A2DP_CHANNEL_MODE_JOINT_STEREO)
+ cap->channel_mode = BT_A2DP_CHANNEL_MODE_JOINT_STEREO;
+ else if (cap->channel_mode & BT_A2DP_CHANNEL_MODE_STEREO)
+ cap->channel_mode = BT_A2DP_CHANNEL_MODE_STEREO;
+ else if (cap->channel_mode & BT_A2DP_CHANNEL_MODE_DUAL_CHANNEL)
+ cap->channel_mode = BT_A2DP_CHANNEL_MODE_DUAL_CHANNEL;
+ } else {
+ if (cap->channel_mode & BT_A2DP_CHANNEL_MODE_MONO)
+ cap->channel_mode = BT_A2DP_CHANNEL_MODE_MONO;
+ }
+
+ if (!cap->channel_mode) {
+ DBG("No supported channel modes");
+ return -1;
+ }
+
+ if (cap->block_length & BT_A2DP_BLOCK_LENGTH_16)
+ cap->block_length = BT_A2DP_BLOCK_LENGTH_16;
+ else if (cap->block_length & BT_A2DP_BLOCK_LENGTH_12)
+ cap->block_length = BT_A2DP_BLOCK_LENGTH_12;
+ else if (cap->block_length & BT_A2DP_BLOCK_LENGTH_8)
+ cap->block_length = BT_A2DP_BLOCK_LENGTH_8;
+ else if (cap->block_length & BT_A2DP_BLOCK_LENGTH_4)
+ cap->block_length = BT_A2DP_BLOCK_LENGTH_4;
+ else {
+ DBG("No supported block lengths");
+ return -1;
+ }
+
+ if (cap->subbands & BT_A2DP_SUBBANDS_8)
+ cap->subbands = BT_A2DP_SUBBANDS_8;
+ else if (cap->subbands & BT_A2DP_SUBBANDS_4)
+ cap->subbands = BT_A2DP_SUBBANDS_4;
+ else {
+ DBG("No supported subbands");
+ return -1;
+ }
+
+ if (cap->allocation_method & BT_A2DP_ALLOCATION_LOUDNESS)
+ cap->allocation_method = BT_A2DP_ALLOCATION_LOUDNESS;
+ else if (cap->allocation_method & BT_A2DP_ALLOCATION_SNR)
+ cap->allocation_method = BT_A2DP_ALLOCATION_SNR;
+
+ min_bitpool = MAX(MIN_BITPOOL, cap->min_bitpool);
+ max_bitpool = MIN(default_bitpool(cap->frequency,
+ cap->channel_mode),
+ cap->max_bitpool);
+
+ cap->min_bitpool = min_bitpool;
+ cap->max_bitpool = max_bitpool;
+
+DBG("bluetooth_a2dp_init bottom:\n channel_mode: %d\n frequency: %d\n allocation_method: %d\n subbands: %d\n block_length: %d\n min_bitpool: %d\n max_bitpool: %d\n ",
+ cap->channel_mode, cap->frequency, cap->allocation_method, cap->subbands,
+ cap->block_length, cap->min_bitpool, cap->max_bitpool);
+
+
+ return 0;
+}
+
+static void bluetooth_a2dp_setup(struct bluetooth_a2dp *a2dp)
+{
+ sbc_capabilities_t active_capabilities = a2dp->sbc_capabilities;
+
+ if (a2dp->sbc_initialized)
+ sbc_reinit(&a2dp->sbc, 0);
+ else
+ sbc_init(&a2dp->sbc, 0);
+ a2dp->sbc_initialized = 1;
+
+ if (active_capabilities.frequency & BT_SBC_SAMPLING_FREQ_16000)
+ a2dp->sbc.frequency = SBC_FREQ_16000;
+
+ if (active_capabilities.frequency & BT_SBC_SAMPLING_FREQ_32000)
+ a2dp->sbc.frequency = SBC_FREQ_32000;
+
+ if (active_capabilities.frequency & BT_SBC_SAMPLING_FREQ_44100)
+ a2dp->sbc.frequency = SBC_FREQ_44100;
+
+ if (active_capabilities.frequency & BT_SBC_SAMPLING_FREQ_48000)
+ a2dp->sbc.frequency = SBC_FREQ_48000;
+
+ if (active_capabilities.channel_mode & BT_A2DP_CHANNEL_MODE_MONO)
+ a2dp->sbc.mode = SBC_MODE_MONO;
+
+ if (active_capabilities.channel_mode & BT_A2DP_CHANNEL_MODE_DUAL_CHANNEL)
+ a2dp->sbc.mode = SBC_MODE_DUAL_CHANNEL;
+
+ if (active_capabilities.channel_mode & BT_A2DP_CHANNEL_MODE_STEREO)
+ a2dp->sbc.mode = SBC_MODE_STEREO;
+
+ if (active_capabilities.channel_mode & BT_A2DP_CHANNEL_MODE_JOINT_STEREO)
+ a2dp->sbc.mode = SBC_MODE_JOINT_STEREO;
+
+ a2dp->sbc.allocation = active_capabilities.allocation_method
+ == BT_A2DP_ALLOCATION_SNR ? SBC_AM_SNR
+ : SBC_AM_LOUDNESS;
+
+ switch (active_capabilities.subbands) {
+ case BT_A2DP_SUBBANDS_4:
+ a2dp->sbc.subbands = SBC_SB_4;
+ break;
+ case BT_A2DP_SUBBANDS_8:
+ a2dp->sbc.subbands = SBC_SB_8;
+ break;
+ }
+
+ switch (active_capabilities.block_length) {
+ case BT_A2DP_BLOCK_LENGTH_4:
+ a2dp->sbc.blocks = SBC_BLK_4;
+ break;
+ case BT_A2DP_BLOCK_LENGTH_8:
+ a2dp->sbc.blocks = SBC_BLK_8;
+ break;
+ case BT_A2DP_BLOCK_LENGTH_12:
+ a2dp->sbc.blocks = SBC_BLK_12;
+ break;
+ case BT_A2DP_BLOCK_LENGTH_16:
+ a2dp->sbc.blocks = SBC_BLK_16;
+ break;
+ }
+
+ a2dp->sbc.bitpool = active_capabilities.max_bitpool;
+ a2dp->codesize = sbc_get_codesize(&a2dp->sbc);
+ a2dp->count = sizeof(struct rtp_header) + sizeof(struct rtp_payload);
+}
+
+static int bluetooth_a2dp_hw_params(struct bluetooth_data *data, int rate, int channels)
+{
+ struct bluetooth_a2dp *a2dp = &data->a2dp;
+ char buf[BT_AUDIO_IPC_PACKET_SIZE];
+ bt_audio_rsp_msg_header_t *rsp_hdr = (void*) buf;
+ struct bt_setconfiguration_req *setconf_req = (void*) buf;
+ struct bt_setconfiguration_rsp *setconf_rsp = (void*) buf;
+ int err;
+
+ err = bluetooth_a2dp_init(data, rate, channels);
+ if (err < 0)
+ return err;
+
+ memset(setconf_req, 0, BT_AUDIO_IPC_PACKET_SIZE);
+ setconf_req->h.msg_type = BT_SETCONFIGURATION_REQ;
+ strncpy(setconf_req->device, data->address, 18);
+ setconf_req->transport = BT_CAPABILITIES_TRANSPORT_A2DP;
+ setconf_req->sbc_capabilities = a2dp->sbc_capabilities;
+ setconf_req->access_mode = BT_CAPABILITIES_ACCESS_MODE_WRITE;
+
+ err = audioservice_send(data->server.fd, &setconf_req->h);
+ if (err < 0)
+ return err;
+
+ err = audioservice_expect(data->server.fd, &rsp_hdr->msg_h,
+ BT_SETCONFIGURATION_RSP);
+ if (err < 0)
+ return err;
+
+ if (rsp_hdr->posix_errno != 0) {
+ SNDERR("BT_SETCONFIGURATION failed : %s(%d)",
+ strerror(rsp_hdr->posix_errno),
+ rsp_hdr->posix_errno);
+ return -rsp_hdr->posix_errno;
+ }
+
+ data->transport = setconf_rsp->transport;
+ data->link_mtu = setconf_rsp->link_mtu;
+
+ /* Setup SBC encoder now we agree on parameters */
+ bluetooth_a2dp_setup(a2dp);
+
+ DBG("\tallocation=%u\n\tsubbands=%u\n\tblocks=%u\n\tbitpool=%u\n",
+ a2dp->sbc.allocation, a2dp->sbc.subbands, a2dp->sbc.blocks,
+ a2dp->sbc.bitpool);
+
+ return 0;
+}
+
+
+
+static int avdtp_write(struct bluetooth_data *data)
+{
+ int ret = 0;
+ struct rtp_header *header;
+ struct rtp_payload *payload;
+ struct bluetooth_a2dp *a2dp = &data->a2dp;
+
+ header = (void *) a2dp->buffer;
+ payload = (void *) (a2dp->buffer + sizeof(*header));
+
+ memset(a2dp->buffer, 0, sizeof(*header) + sizeof(*payload));
+
+ payload->frame_count = a2dp->frame_count;
+ header->v = 2;
+ header->pt = 1;
+ header->sequence_number = htons(a2dp->seq_num);
+ header->timestamp = htonl(a2dp->nsamples);
+ header->ssrc = htonl(1);
+
+retry:
+ ret = send(data->stream.fd, a2dp->buffer, a2dp->count, MSG_DONTWAIT);
+ if (ret < 0) {
+ DBG("send returned %d errno %s.", ret, strerror(errno));
+ ret = -errno;
+ if (ret == -EAGAIN) {
+ struct timespec tv;
+ DBG("retry");
+ tv.tv_sec = 0;
+ tv.tv_nsec = 100 * 1000;
+ nanosleep(&tv, NULL);
+ goto retry;
+ }
+ }
+
+ /* Reset buffer of data to send */
+ a2dp->count = sizeof(struct rtp_header) + sizeof(struct rtp_payload);
+ a2dp->frame_count = 0;
+ a2dp->samples = 0;
+ a2dp->seq_num++;
+
+ return ret;
+}
+
+static long bluetooth_a2dp_write(struct bluetooth_data *data,
+ const char* buffer,
+ long size)
+{
+ struct bluetooth_a2dp *a2dp = &data->a2dp;
+ long ret = 0;
+ long frames_to_read, frames_left = size;
+ int encoded, written;
+ const char *buff;
+
+ while (frames_left > 0) {
+
+ if ((data->count + frames_left) <= a2dp->codesize)
+ frames_to_read = frames_left;
+ else
+ frames_to_read = a2dp->codesize - data->count;
+ buff = buffer + ret;
+
+ memcpy(data->buffer + data->count, buff, frames_to_read);
+ /* Remember we have some frames in the pipe now */
+ data->count += frames_to_read;
+ if (data->count != a2dp->codesize) {
+ ret = frames_to_read;
+ goto done;
+ }
+
+ /* Enough data to encode (sbc wants 1k blocks) */
+ encoded = sbc_encode(&(a2dp->sbc), data->buffer, a2dp->codesize,
+ a2dp->buffer + a2dp->count,
+ sizeof(a2dp->buffer) - a2dp->count,
+ &written);
+ if (encoded <= 0) {
+ DBG("Encoding error %d", encoded);
+ goto done;
+ }
+
+ data->count -= encoded;
+ a2dp->count += written;
+ a2dp->frame_count++;
+ a2dp->samples += encoded;
+ a2dp->nsamples += encoded;
+
+ /* No space left for another frame then send */
+ if (a2dp->count + written >= data->link_mtu) {
+ DBG("sending packet %d, count %d, link_mtu %u",
+ a2dp->seq_num, a2dp->count,
+ data->link_mtu);
+ avdtp_write(data);
+ }
+
+ ret += frames_to_read;
+ frames_left -= frames_to_read;
+ }
+
+ /* note: some ALSA apps will get confused otherwise */
+ if (ret > size)
+ ret = size;
+
+done:
+ DBG("returning %ld", ret);
+ return ret;
+}
+
+
+static int audioservice_send(int sk, const bt_audio_msg_header_t *msg)
+{
+ int err;
+
+ DBG("sending %s", bt_audio_strmsg(msg->msg_type));
+ if (send(sk, msg, BT_AUDIO_IPC_PACKET_SIZE, 0) > 0)
+ err = 0;
+ else {
+ err = -errno;
+ SNDERR("Error sending data to audio service: %s(%d)",
+ strerror(errno), errno);
+ }
+
+ return err;
+}
+
+static int audioservice_recv(int sk, bt_audio_msg_header_t *inmsg)
+{
+ int err;
+ const char *type;
+
+ DBG("trying to receive msg from audio service...");
+ if (recv(sk, inmsg, BT_AUDIO_IPC_PACKET_SIZE, 0) > 0) {
+ type = bt_audio_strmsg(inmsg->msg_type);
+ if (type) {
+ DBG("Received %s", type);
+ err = 0;
+ } else {
+ err = -EINVAL;
+ SNDERR("Bogus message type %d "
+ "received from audio service",
+ inmsg->msg_type);
+ }
+ } else {
+ err = -errno;
+ SNDERR("Error receiving data from audio service: %s(%d)",
+ strerror(errno), errno);
+ }
+
+ return err;
+}
+
+static int audioservice_expect(int sk, bt_audio_msg_header_t *rsp_hdr,
+ int expected_type)
+{
+ int err = audioservice_recv(sk, rsp_hdr);
+ if (err == 0) {
+ if (rsp_hdr->msg_type != expected_type) {
+ err = -EINVAL;
+ SNDERR("Bogus message %s received while "
+ "%s was expected",
+ bt_audio_strmsg(rsp_hdr->msg_type),
+ bt_audio_strmsg(expected_type));
+ }
+ }
+ return err;
+}
+
+static int bluetooth_init(struct bluetooth_data *data)
+{
+ int sk, err;
+ char buf[BT_AUDIO_IPC_PACKET_SIZE];
+ bt_audio_rsp_msg_header_t *rsp_hdr = (void*) buf;
+ struct bt_getcapabilities_req *getcaps_req = (void*) buf;
+ struct bt_getcapabilities_rsp *getcaps_rsp = (void*) buf;
+
+ memset(data, 0, sizeof(struct bluetooth_data));
+
+ data->server.fd = -1;
+ data->stream.fd = -1;
+
+ sk = bt_audio_service_open();
+ if (sk <= 0) {
+ err = -errno;
+ goto failed;
+ }
+
+ data->server.fd = sk;
+ data->server.events = POLLIN;
+
+ memset(getcaps_req, 0, BT_AUDIO_IPC_PACKET_SIZE);
+ getcaps_req->h.msg_type = BT_GETCAPABILITIES_REQ;
+ getcaps_req->flags = 0;
+ getcaps_req->flags |= BT_FLAG_AUTOCONNECT;
+ strncpy(getcaps_req->device, data->address, 18);
+ getcaps_req->transport = BT_CAPABILITIES_TRANSPORT_A2DP;
+
+ err = audioservice_send(data->server.fd, &getcaps_req->h);
+ if (err < 0)
+ goto failed;
+
+ err = audioservice_expect(data->server.fd, &rsp_hdr->msg_h, BT_GETCAPABILITIES_RSP);
+ if (err < 0)
+ goto failed;
+
+ if (rsp_hdr->posix_errno != 0) {
+ SNDERR("BT_GETCAPABILITIES failed : %s(%d)",
+ strerror(rsp_hdr->posix_errno),
+ rsp_hdr->posix_errno);
+ return -rsp_hdr->posix_errno;
+ }
+
+ data->transport = getcaps_rsp->transport;
+
+ if (getcaps_rsp->transport == BT_CAPABILITIES_TRANSPORT_A2DP) {
+ data->a2dp.sbc_capabilities = getcaps_rsp->sbc_capabilities;
+ }
+
+ return 0;
+
+failed:
+ bt_audio_service_close(sk);
+ return err;
+}
+
+int a2dp_init(const char* address, int rate, int channels, a2dpData* dataPtr)
+{
+ int err;
+
+ *dataPtr = NULL;
+ struct bluetooth_data* data = malloc(sizeof(struct bluetooth_data));
+ if (!data)
+ return -1;
+
+ strncpy(data->address, address, 18);
+
+ err = bluetooth_init(data);
+ if (err < 0)
+ goto error;
+
+ err = bluetooth_a2dp_hw_params(data, rate, channels);
+ if (err < 0) {
+ printf("bluetooth_a2dp_hw_params failed");
+ goto error;
+ }
+
+ err = bluetooth_prepare(data);
+ if (err < 0) {
+ printf("bluetooth_prepare failed");
+ goto error;
+ }
+
+ *dataPtr = data;
+ return 0;
+
+error:
+ bluetooth_exit(data);
+ free(data);
+
+ return err;
+}
+
+int a2dp_write(a2dpData d, const void* buffer, int count)
+{
+ struct bluetooth_data* data = (struct bluetooth_data*)d;
+ return bluetooth_a2dp_write(data, buffer, count);
+}
+
+void a2dp_cleanup(a2dpData d)
+{
+ struct bluetooth_data* data = (struct bluetooth_data*)d;
+ bluetooth_exit(data);
+ free(data);
+}
--- /dev/null
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef void* a2dpData;
+
+int a2dp_init(const char* address, int rate, int channels, a2dpData* dataPtr);
+int a2dp_write(a2dpData data, const void* buffer, int count);
+void a2dp_cleanup(a2dpData data);
+
+#ifdef __cplusplus
+}
+#endif
textfile.c \
android_bluez.c
+LOCAL_CFLAGS+= \
+ -O3 \
+ -DNEED_DBUS_WATCH_GET_UNIX_FD
+
LOCAL_C_INCLUDES:= \
- $(LOCAL_PATH) \
$(call include-path-for, bluez-libs) \
- $(call include-path-for, bluez-utils)/eglib/ \
- $(call include-path-for, bluez-utils)/gdbus/ \
- external/expat/lib/ \
+ $(call include-path-for, bluez-utils)/eglib \
+ $(call include-path-for, bluez-utils)/gdbus \
$(call include-path-for, dbus)
-LOCAL_STATIC_LIBRARIES := \
- libeglib_static \
- libgdbus_static
-
LOCAL_MODULE:=libbluez-utils-common-static
-LOCAL_CFLAGS+= \
- -O3 \
- -DNEED_DBUS_WATCH_GET_UNIX_FD
-
include $(BUILD_STATIC_LIBRARY)
LOCAL_PATH:= $(call my-dir)
-#
-# hcid
-#
-
include $(CLEAR_VARS)
-LOCAL_C_INCLUDES:= \
- $(call include-path-for, bluez-libs) \
- $(call include-path-for, dbus) \
- $(call include-path-for, bluez-utils)/common
+LOCAL_SRC_FILES:= \
+ dun.c \
+ main.c \
+ msdun.c \
+ sdp.c
LOCAL_CFLAGS:= \
-DVERSION=\"3.36\" \
- -DSTORAGEDIR=\"/data\" \
- -DCONFIGDIR=\"/etc\" \
+ -DSTORAGEDIR=\"/data/misc/hcid\" \
+ -DCONFIGDIR=\"/etc/bluez\"
-LOCAL_SRC_FILES:= \
- dun.c \
- main.c \
- msdun.c \
- sdp.c
+LOCAL_C_INCLUDES:= \
+ $(call include-path-for, bluez-libs) \
+ $(call include-path-for, bluez-utils)/common \
+ $(call include-path-for, dbus)
LOCAL_SHARED_LIBRARIES := \
- libbluetooth
+ libbluetooth
LOCAL_MODULE_PATH := $(TARGET_OUT_OPTIONAL_EXECUTABLES)
LOCAL_MODULE_TAGS := eng
gmain.c \
gmodule.c
-LOCAL_C_INCLUDES:= \
- $(LOCAL_PATH)
+LOCAL_CFLAGS+=-O3
LOCAL_MODULE:=libeglib_static
-LOCAL_CFLAGS+=-O3
-
include $(BUILD_STATIC_LIBRARY)
LOCAL_SRC_FILES:= \
mainloop.c object.c watch.c
+LOCAL_CFLAGS+=-O3 -DNEED_DBUS_WATCH_GET_UNIX_FD
+
LOCAL_C_INCLUDES:= \
$(call include-path-for, bluez-libs) \
- $(call include-path-for, dbus) \
- $(call include-path-for, bluez-utils)/common/ \
- $(call include-path-for, bluez-utils)/eglib/ \
- $(LOCAL_PATH)
+ $(call include-path-for, bluez-utils)/eglib \
+ $(call include-path-for, bluez-utils)/common \
+ $(call include-path-for, dbus)
LOCAL_SHARED_LIBRARIES := \
libbluetooth \
libdbus
-LOCAL_STATIC_LIBRARIES := \
- libeglib_static \
- libbluez-utils-common-static
-
LOCAL_MODULE:=libgdbus_static
-LOCAL_CFLAGS+=-O3 -DNEED_DBUS_WATCH_GET_UNIX_FD
-
include $(BUILD_STATIC_LIBRARY)
LOCAL_PATH:= $(call my-dir)
#
-# hcid
+# libhcid
#
include $(CLEAR_VARS)
-LOCAL_C_INCLUDES:= \
- $(call include-path-for, bluez-libs) \
- $(call include-path-for, dbus) \
- $(call include-path-for, bluez-utils)/common/ \
- $(call include-path-for, bluez-utils)/eglib/ \
- $(call include-path-for, bluez-utils)/gdbus/ \
- $(call include-path-for, bluez-utils)/sdpd/
-
-LOCAL_CFLAGS:= \
- -DVERSION=\"3.36\" \
- -DSTORAGEDIR=\"/data/misc/hcid\" \
- -DCONFIGDIR=\"/etc\" \
- -DSERVICEDIR=\"/system/bin\" \
- -DPLUGINDIR=\"\" \
- -DANDROID_SET_AID_AND_CAP \
- -DANDROID_EXPAND_NAME
-
LOCAL_SRC_FILES:= \
adapter.c \
agent.c \
+ device.c \
dbus-common.c \
dbus-database.c \
dbus-error.c \
dbus-sdp.c \
dbus-security.c \
dbus-service.c \
- device.c \
kword.c \
lexer.c \
main.c \
storage.c \
plugin.c
+LOCAL_CFLAGS:= \
+ -DVERSION=\"3.36\" \
+ -DSTORAGEDIR=\"/data/misc/hcid\" \
+ -DCONFIGDIR=\"/etc/bluez\" \
+ -DSERVICEDIR=\"/system/bin\" \
+ -DPLUGINDIR=\"/system/lib/bluez-plugin\" \
+ -DANDROID_SET_AID_AND_CAP \
+ -DANDROID_EXPAND_NAME
+
+LOCAL_C_INCLUDES:= \
+ $(call include-path-for, bluez-libs) \
+ $(call include-path-for, bluez-utils)/common \
+ $(call include-path-for, bluez-utils)/eglib \
+ $(call include-path-for, bluez-utils)/gdbus \
+ $(call include-path-for, bluez-utils)/sdpd \
+ $(call include-path-for, dbus)
+
LOCAL_SHARED_LIBRARIES := \
+ libdl \
libbluetooth \
libdbus \
- libexpat \
libcutils
LOCAL_STATIC_LIBRARIES := \
libgdbus_static \
libbluez-utils-common-static
+LOCAL_MODULE:=libhcid
+
+include $(BUILD_SHARED_LIBRARY)
+
+#
+# hcid
+#
+
+include $(CLEAR_VARS)
+
+LOCAL_SHARED_LIBRARIES := \
+ libhcid
+
LOCAL_MODULE:=hcid
include $(BUILD_EXECUTABLE)
* the plugins might wanna expose some paths on the bus. However the
* best order of how to init various subsystems of the Bluetooth
* daemon needs to be re-worked. */
-#if 0
plugin_init(config);
-#endif
init_security_data();
hcid_dbus_unregister();
-#if 0
plugin_cleanup();
-#endif
stop_sdp_server();
--- /dev/null
+LOCAL_PATH:= $(call my-dir)
+
+# HID plugin
+
+include $(CLEAR_VARS)
+
+LOCAL_SRC_FILES:= \
+ device.c \
+ fakehid.c \
+ main.c \
+ manager.c \
+ server.c \
+ storage.c
+
+LOCAL_CFLAGS:= \
+ -DVERSION=\"3.36\" \
+ -DSTORAGEDIR=\"/data/misc/hcid\" \
+ -DCONFIGDIR=\"/etc/bluez\"
+
+LOCAL_C_INCLUDES:= \
+ $(call include-path-for, bluez-libs) \
+ $(call include-path-for, bluez-utils)/common \
+ $(call include-path-for, bluez-utils)/eglib \
+ $(call include-path-for, bluez-utils)/hcid \
+ $(call include-path-for, bluez-utils)/gdbus \
+ $(call include-path-for, dbus)
+
+LOCAL_SHARED_LIBRARIES := \
+ libhcid \
+ libbluetooth \
+ libdbus \
+ libexpat \
+ libcutils
+
+LOCAL_MODULE_PATH := $(TARGET_OUT_SHARED_LIBRARIES)/bluez-plugin
+LOCAL_UNSTRIPPED_PATH := $(TARGET_OUT_SHARED_LIBRARIES_UNSTRIPPED)/bluez-plugin
+LOCAL_MODULE := input
+
+include $(BUILD_SHARED_LIBRARY)
#include <errno.h>
#include <stdlib.h>
#include <unistd.h>
+#include <limits.h>
#include <bluetooth/bluetooth.h>
#include <bluetooth/hci.h>
LOCAL_PATH:= $(call my-dir)
include $(CLEAR_VARS)
-LOCAL_C_INCLUDES:= \
- $(call include-path-for, bluez-libs) \
- $(call include-path-for, bluez-utils)/common
-
-LOCAL_CFLAGS:= \
- -DVERSION=\"3.36\" -DCONFIGDIR=\"/etc\" \
- -DNEED_PPOLL
-
LOCAL_SRC_FILES:= \
kword.c \
lexer.c \
main.c \
- parser.c
+ parser.c
+
+LOCAL_CFLAGS:= \
+ -DVERSION=\"3.36\" \
+ -DCONFIGDIR=\"/etc/bluez\" \
+ -DNEED_PPOLL
+
+LOCAL_C_INCLUDES:= \
+ $(call include-path-for, bluez-libs) \
+ $(call include-path-for, bluez-utils)/common
LOCAL_SHARED_LIBRARIES := \
libbluetooth
LOCAL_STATIC_LIBRARIES := \
- libbluez-utils-common-static
+ libbluez-utils-common-static
LOCAL_MODULE_PATH := $(TARGET_OUT_OPTIONAL_EXECUTABLES)
LOCAL_MODULE_TAGS := eng
--- /dev/null
+/* Hack to force sbc.c to be compiled as ARM */
+
+#include "sbc.c"
include $(CLEAR_VARS)
-LOCAL_C_INCLUDES:= \
- $(call include-path-for, bluez-libs) \
- $(call include-path-for, bluez-utils)/common/ \
- $(call include-path-for, bluez-utils)/eglib/
-
-LOCAL_CFLAGS:=-DVERSION=\"3.36\"
-
LOCAL_SRC_FILES:= \
cstate.c \
request.c \
server.c \
servicedb.c
+LOCAL_CFLAGS:=-DVERSION=\"3.36\"
+
+LOCAL_C_INCLUDES:= \
+ $(call include-path-for, bluez-libs) \
+ $(call include-path-for, bluez-utils)/common \
+ $(call include-path-for, bluez-utils)/eglib
+
LOCAL_MODULE:=libsdpserver_static
include $(BUILD_STATIC_LIBRARY)
-BUILD_HCICONFIG:=1
-BUILD_HCITOOL:=1
-BUILD_L2PING:=1
-BUILD_HCIATTACH:=1
-
LOCAL_PATH:= $(call my-dir)
#
include $(CLEAR_VARS)
+LOCAL_SRC_FILES:= \
+ sdptool.c
+
LOCAL_C_INCLUDES:= \
$(call include-path-for, bluez-libs) \
- $(call include-path-for, bluez-utils)/common/
+ $(call include-path-for, bluez-utils)/common/
LOCAL_CFLAGS:= \
-DVERSION=\"3.36\" -fpermissive
-LOCAL_SRC_FILES:= \
- sdptool.c
-
LOCAL_SHARED_LIBRARIES := \
- libbluetooth
+ libbluetooth
LOCAL_STATIC_LIBRARIES := \
libbluez-utils-common-static
include $(BUILD_EXECUTABLE)
-ifeq ($(BUILD_HCICONFIG),1)
-
#
-# hciconfig
+# hciconfig
#
include $(CLEAR_VARS)
+LOCAL_SRC_FILES:= \
+ csr.c \
+ csr_h4.c \
+ hciconfig.c
+
LOCAL_C_INCLUDES:= \
$(call include-path-for, bluez-libs) \
$(call include-path-for, bluez-utils)/common/
-DSTORAGEDIR=\"/tmp\" \
-DVERSION=\"3.36\"
-LOCAL_SRC_FILES:= \
- csr.c \
- csr_h4.c \
- hciconfig.c
-
LOCAL_SHARED_LIBRARIES := \
- libbluetooth
+ libbluetooth
LOCAL_STATIC_LIBRARIES := \
libbluez-utils-common-static
LOCAL_MODULE_PATH := $(TARGET_OUT_OPTIONAL_EXECUTABLES)
LOCAL_MODULE_TAGS := eng
-
LOCAL_MODULE:=hciconfig
include $(BUILD_EXECUTABLE)
-endif # BUILD_HCICONFIG
-
-ifeq ($(BUILD_HCITOOL),1)
-
#
-# hcitool
+# hcitool
#
include $(CLEAR_VARS)
+LOCAL_SRC_FILES:= \
+ hcitool.c
+
LOCAL_C_INCLUDES:= \
$(call include-path-for, bluez-libs) \
$(call include-path-for, bluez-utils)/common/
-DSTORAGEDIR=\"/tmp\" \
-DVERSION=\"3.36\"
-LOCAL_SRC_FILES:= \
- hcitool.c
-
LOCAL_SHARED_LIBRARIES := \
libbluetooth
LOCAL_MODULE_PATH := $(TARGET_OUT_OPTIONAL_EXECUTABLES)
LOCAL_MODULE_TAGS := eng
-
LOCAL_MODULE:=hcitool
include $(BUILD_EXECUTABLE)
-endif # hcitool
-
-ifeq ($(BUILD_L2PING),1)
-
#
-# l2ping
+# l2ping
#
include $(CLEAR_VARS)
l2ping.c
LOCAL_SHARED_LIBRARIES := \
- libbluetooth
+ libbluetooth
LOCAL_MODULE_PATH := $(TARGET_OUT_OPTIONAL_EXECUTABLES)
LOCAL_MODULE_TAGS := eng
include $(BUILD_EXECUTABLE)
-endif # l2ping
-
-
#
# hciattach
#
-ifeq ($(BUILD_HCIATTACH),1)
-
include $(CLEAR_VARS)
+LOCAL_SRC_FILES:= \
+ hciattach.c \
+ hciattach_st.c \
+ hciattach_tialt.c
+
LOCAL_C_INCLUDES:= \
$(call include-path-for, bluez-libs) \
- $(call include-path-for, bluez-utils)/common/
+ $(call include-path-for, bluez-utils)/common/
LOCAL_CFLAGS:= \
-DVERSION=\"3.36\" \
- -D__BSD_VISIBLE=1
-
-LOCAL_SRC_FILES:= \
- hciattach.c \
- hciattach_st.c \
- hciattach_tialt.c
+ -D__BSD_VISIBLE=1
LOCAL_SHARED_LIBRARIES := \
- libbluetooth
+ libbluetooth
LOCAL_STATIC_LIBRARIES := \
libbluez-utils-common-static
LOCAL_MODULE:=hciattach
include $(BUILD_EXECUTABLE)
-
-endif # hciattach
}
}
-static int set_speed(int fd, struct termios *ti, int speed)
+int set_speed(int fd, struct termios *ti, int speed)
{
cfsetospeed(ti, uart_speed(speed));
cfsetispeed(ti, uart_speed(speed));
extern int texasalt_init(int fd, int speed);
int texasalt(int fd, struct uart_t *u, struct termios *ti) {
- texasalt_init(fd, u->speed);
+ return texasalt_init(fd, u->speed);
}
static int read_check(int fd, void *buf, int count)
{
struct uart_t *u = NULL;
int detach, printpid, opt, i, n, ld, err;
- int to = 5;
+ int to = 5;
int init_speed = 0;
int send_break = 0;
pid_t pid;
#include <stdio.h>
#include <errno.h>
#include <fcntl.h>
-#include <unistd.h>
#include <stdlib.h>
#include <string.h>
#include <signal.h>
#include <syslog.h>
#include <termios.h>
#include <time.h>
+#include <unistd.h>
#include <sys/time.h>
#include <sys/poll.h>
#include <sys/param.h>
} __attribute__((packed)) command_complete_t;
extern int read_hci_event(int fd, unsigned char* buf, int size);
+extern int set_speed(int fd, struct termios *ti, int speed);
-static int read_command_complete(int fd, unsigned short opcode, unsigned char len) {
+static int read_command_complete(int fd, uint16_t opcode) {
command_complete_t resp;
/* Read reply. */
- FAILIF(read_hci_event(fd, (char *)&resp, sizeof(resp)) < 0,
- "Failed to read response");
+ FAILIF(read_hci_event(fd, (unsigned char *)&resp, sizeof(resp)) < 0,
+ "Failed to read response for opcode %#04x\n", opcode);
/* Parse speed-change reply */
FAILIF(resp.uart_prefix != HCI_EVENT_PKT,
- "Error in response: not an event packet, but 0x%02x!\n",
+ "Error in response: not an event packet, but %#02X!\n",
resp.uart_prefix);
FAILIF(resp.hci_hdr.evt != EVT_CMD_COMPLETE, /* event must be event-complete */
"but 0x%02x!\n", resp.hci_hdr.evt);
FAILIF(resp.hci_hdr.plen < 4, /* plen >= 4 for EVT_CMD_COMPLETE */
- "Error in response: plen is not >= 4, but 0x%02x!\n",
+ "Error in response: plen is not >= 4, but %#02X!\n",
resp.hci_hdr.plen);
/* cmd-complete event: opcode */
FAILIF(resp.cmd_complete.opcode != (uint16_t)opcode,
- "Error in response: opcode is 0x%04x, not 0x%04x!",
+ "Error in response: opcode is %#04X, not %#04X!",
resp.cmd_complete.opcode, opcode);
+ FAILIF(resp.status != 0,
+ "Error in response: status is %x for opcode %#04x\n", resp.status,
+ opcode);
+
return resp.status == 0 ? 0 : -1;
}
uint32_t speed;
} __attribute__((packed)) texas_speed_change_cmd_t;
-static int texas_change_speed(int fd, uint32_t speed) {
-
- return 0;
+static int texas_change_speed(int fd, struct termios *ti, uint32_t speed) {
/* Send a speed-change request */
-
texas_speed_change_cmd_t cmd;
int n;
cmd.hci_hdr.plen = sizeof(uint32_t);
cmd.speed = speed;
- fprintf(stdout, "Setting speed to %d\n", speed);
+ printf("Setting speed to %d\n", speed);
n = write(fd, &cmd, sizeof(cmd));
if (n < 0) {
perror("Failed to write speed-set command");
return -1;
}
- n = write(fd, &cmd, sizeof(cmd));
- if (n < 0) {
- perror("Failed to write command.");
- return -1;
- }
if (n < (int)sizeof(cmd)) {
fprintf(stderr, "Wanted to write %d bytes, could only write %d. "
"Stop\n", (int)sizeof(cmd), n);
}
/* Parse speed-change reply */
- if (read_command_complete(fd, 0xff36, 4) < 0) {
+ if (read_command_complete(fd, 0xff36) < 0) {
+ return -1;
+ }
+
+ if (set_speed(fd, ti, speed) < 0) {
+ perror("Can't set baud rate");
return -1;
}
- fprintf(stdout, "Speed changed to %d.\n", speed);
+
+ printf("Texas speed changed to %d.\n", speed);
+ return 0;
}
static int texas_load_firmware(int fd, const char *firmware) {
+ int fw;
- fprintf(stdout, "Opening firmware file: %s\n", firmware);
- int fw = open(firmware, O_RDONLY);
- FAILIF(fw < 0,
- "Could not open firmware file %s: %s (%d).\n",
+ printf("Loading firmware from %s...\n", firmware);
+ fw = open(firmware, O_RDONLY);
+ FAILIF(fw < 0, "Could not open firmware file %s: %s (%d).\n",
firmware, strerror(errno), errno);
- fprintf(stdout, "Uploading firmware...\n");
- do {
- int nr;
- /* Read each command and wait for a response. */
- unsigned char cmdp[1 + sizeof(hci_command_hdr)];
- nr = read(fw, cmdp, sizeof(cmdp));
- if (!nr)
- break;
- hci_command_hdr *cmd = (hci_command_hdr *)(cmdp + 1);
- FAILIF(nr != sizeof(cmdp), "Could not read H4 + HCI header!\n");
- FAILIF(*cmdp != HCI_COMMAND_PKT, "Command is not an H4 command packet!\n");
-
- unsigned char data[1024];
- FAILIF(read(fw, data, cmd->plen) != cmd->plen,
- "Could not read %d bytes of data for command with opcode %04x!\n",
- cmd->plen,
- cmd->opcode);
-
- {
-#if 0
- fprintf(stdout, "\topcode 0x%04x (%d bytes of data).\n",
- cmd->opcode,
- cmd->plen);
-#endif
- struct iovec iov_cmd[2];
- iov_cmd[0].iov_base = cmdp;
- iov_cmd[0].iov_len = sizeof(cmdp);
- iov_cmd[1].iov_base = data;
- iov_cmd[1].iov_len = cmd->plen;
- int nw = writev(fd, iov_cmd, 2);
- FAILIF(nw != sizeof(cmd) + cmd->plen,
- "Could not send entire command (sent only %d bytes)!\n",
- nw);
- }
-
- /* Wait for response */
- if (read_command_complete(fd,
- cmd->opcode,
- cmd->plen) < 0) {
+ while (1) {
+ unsigned char cmd[1024];
+ hci_command_hdr *hci_cmd;
+ unsigned int n;
+
+ /* read in H4 packets from firmware file */
+ n = read(fw, cmd, sizeof(hci_command_hdr) + 1);
+ if (!n) break;
+ FAILIF(n != sizeof(hci_command_hdr) + 1,
+ "Could not read H4 + HCI header!\n");
+ FAILIF(cmd[0] != HCI_COMMAND_PKT,
+ "Command is not an H4 command packet!\n");
+ hci_cmd = (hci_command_hdr *)&cmd[1];
+
+ FAILIF(read(fw, &cmd[sizeof(hci_command_hdr) + 1], hci_cmd->plen)
+ != hci_cmd->plen,
+ "Could not read %d bytes of data for opcode %#04X!\n",
+ hci_cmd->plen, hci_cmd->opcode);
+
+ /* write h4 packet to chip */
+// printf("opcode %#04X (%d bytes data)\n", hci_cmd->opcode, hci_cmd->plen);
+ n = write(fd, cmd, sizeof(hci_command_hdr) + 1 + hci_cmd->plen);
+ FAILIF(n != sizeof(hci_command_hdr) + 1 + hci_cmd->plen,
+ "Could not send entire command (sent only %d bytes)!\n",
+ n);
+ if (read_command_complete(fd, hci_cmd->opcode) < 0) {
return -1;
}
-
- } while(1);
- fprintf(stdout, "Firmware upload successful.\n");
-
+ }
close(fw);
+
+ printf("Firmware load successful.\n");
+
return 0;
}
{
struct timespec tm = {0, 50000};
char cmd[4];
- unsigned char resp[100]; /* Response */
+ unsigned char resp[100]; /* Response */
int n;
memset(resp,'\0', 100);
- /* It is possible to get software version with manufacturer specific
+ /* It is possible to get software version with manufacturer specific
HCI command HCI_VS_TI_Version_Number. But the only thing you get more
is if this is point-to-point or point-to-multipoint module */
fprintf(stderr,"WARNING : module's manufacturer is not Texas Instrument\n");
/* Print LMP version */
- fprintf(stderr, "Texas module LMP version : 0x%02x\n", resp[10] & 0xFF);
+ fprintf(stderr, "Texas module LMP version : %#02X\n", resp[10] & 0xFF);
/* Print LMP subversion */
{
- unsigned short lmp_subv = resp[13] | (resp[14] << 8);
- unsigned short brf_chip = (lmp_subv & 0x7c00) >> 10;
+ uint16_t lmp_subv = resp[13] | (resp[14] << 8);
+ uint16_t brf_chip = (lmp_subv & 0x7c00) >> 10;
static const char *c_brf_chip[5] = {
"unknown",
"unknown",
"brf6300"
};
- fprintf(stderr, "Texas module LMP sub-version : 0x%04x\n", lmp_subv);
+ fprintf(stderr, "Texas module LMP sub-version : %#04X\n", lmp_subv);
fprintf(stderr,
"\tinternal version freeze: %d\n"
char fw[100];
sprintf(fw, "/etc/firmware/%s.bin", c_brf_chip[brf_chip]);
- texas_load_firmware(fd, fw);
- texas_change_speed(fd, speed);
+ texas_change_speed(fd, ti, speed);
+
+ texas_load_firmware(fd, fw);
}
nanosleep(&tm, NULL);
return 0;
{
printf("l2ping - L2CAP ping\n");
printf("Usage:\n");
- printf("\tl2ping [-i device] [-s size] [-c count] [-t timeout] [-f] [-r] <bdaddr>\n");
+ printf("\tl2ping [-i device] [-s size] [-c count] [-t timeout] [-d delay] [-f] [-r] <bdaddr>\n");
}
int main(int argc, char *argv[])
/* Default options */
bacpy(&bdaddr, BDADDR_ANY);
- while ((opt=getopt(argc,argv,"i:s:c:t:fr")) != EOF) {
+ while ((opt=getopt(argc,argv,"i:d:s:c:t:fr")) != EOF) {
switch(opt) {
case 'i':
if (!strncasecmp(optarg, "hci", 3))
str2ba(optarg, &bdaddr);
break;
+ case 'd':
+ delay = atoi(optarg);
+ break;
+
case 'f':
/* Kinda flood ping */
delay = 0;
sdp_list_t *aproto, *proto[2];
sdp_record_t record;
uint8_t u8 = si->channel ? si->channel : 7;
- uint16_t u16 = 0x17;
+ /* Set the bits for the supported features in the SDP records */
+ uint16_t u16 = 0x07;
sdp_data_t *channel, *features;
uint8_t netid = si->network ? si->network : 0x01; // ???? profile document
sdp_data_t *network = sdp_data_alloc(SDP_UINT8, &netid);
sdp_list_t *aproto, *proto[2];
sdp_record_t record;
uint8_t u8 = si->channel ? si->channel : 7;
- uint16_t u16 = 0x17;
+ /* Set bits for supported features. */
+ uint16_t u16 = 0x07;
sdp_data_t *channel, *features;
uint8_t netid = si->network ? si->network : 0x01; // ???? profile document
sdp_data_t *network = sdp_data_alloc(SDP_UINT8, &netid);
OSDN Git Service
