2002-07-24 Aldy Hernandez <aldyh@redhat.com>

2002-07-24  Aldy Hernandez  <aldyh@redhat.com>

	* config/rs6000/eabi.h: Define TARGET_SPE_ABI, TARGET_SPE,
	TARGET_ISEL, and TARGET_FPRS.

	* doc/invoke.texi (RS/6000 and PowerPC Options): Document
	-mabi=spe, -mabi=no-spe, and -misel=.

	* config/rs6000/rs6000-protos.h: Add output_isel.
	Move vrsave_operation prototype here.

	* config/rs6000/rs6000.md (sminsi3): Allow pattern for TARGET_ISEL.
	(smaxsi3): Same.
	(uminsi3): Same.
	(umaxsi3): Same.
	(abssi2_nopower): Disallow when TARGET_ISEL.
	(*ne0): Same.
	(negsf2): Change to expand and rename old pattern to *negsf2.
	(abssf2): Change to expand and rename old pattern to *abssf2.

	New expanders: fix_truncsfsi2, floatunssisf2, floatsisf2,
	fixunssfsi2.

	Change patterns that check for TARGET_HARD_FLOAT or
	TARGET_SOFT_FLOAT to also check TARGET_FPRS.

	* config/rs6000/rs6000.c: New globals: rs6000_spe_abi,
	rs6000_isel, rs6000_fprs, rs6000_isel_string.
	(rs6000_override_options): Add 8540 case to
	processor_target_table.
	Set rs6000_isel for the 8540.
	Call rs6000_parse_isel_option.
	(enable_mask_for_builtins): New.
	(rs6000_parse_isel_option): New.
	(rs6000_parse_abi_options): Add spe and no-spe.
	(easy_fp_constant): Treat !TARGET_FPRS as soft-float.
	(rs6000_legitimize_address): Check for TARGET_FPRS when checking
	for TARGET_HARD_FLOAT.
	Add case for SPE_VECTOR_MODE.
	(rs6000_legitimize_reload_address): Handle SPE vector modes.
	(rs6000_legitimate_address): Disallow PRE_INC/PRE_DEC for SPE
	vector modes.
	Check for TARGET_FPRS when checking for TARGET_HARD_FLOAT.
	(rs6000_emit_move): Check for TARGET_FPRS.
	Add cases for SPE vector modes.
	(function_arg_boundary): Return 64 for SPE vector modes.
	(function_arg_advance): Check for TARGET_FPRS and
	Handle SPE vectors.
	(function_arg): Same.
	(setup_incoming_varargs): Check for TARGET_FPRS.
	(rs6000_va_arg): Same.
	(struct builtin_description): Un-constify mask field.  Move up in
	file.
	(bdesc_2arg): Un-constify and add SPE builtins.
	(bdesc_1arg): Same.
	(bdesc_spe_predicates): New.
	(bdesc_spe_evsel): New.
	(rs6000_expand_unop_builtin): Add SPE 5-bit literal builtins.
	(rs6000_expand_binop_builtin): Same.
	(bdesc_2arg_spe): New.
	(spe_expand_builtin): New.
	(spe_expand_predicate_builtin): New.
	(spe_expand_evsel_builtin): New.
	(rs6000_expand_builtin): Call spe_expand_builtin for SPE.
	(rs6000_init_builtins): Initialize SPE builtins.  Call
	rs6000_common_init_builtins.
	(altivec_init_builtins): Move all non-altivec builtin code to...
	(rs6000_common_init_builtins): ...here.  New function.
	(branch_positive_comparison_operator): Allow NE code for SPE.
	(ccr_bit): Return correct ccr bit for SPE fp.
	(print_operand): Emit crnor in 'D' case for SPE.
	New case 't'.
	Add SPE code for 'y' case.
	(rs6000_generate_compare): Generate rtl for SPE fp.
	(output_cbranch): Handle SPE hard floats.
	(rs6000_emit_cmove): Handle isel.
	(rs6000_emit_int_cmove): New.
	(output_isel): New.
	(rs6000_stack_info): Adjust stack frame so GPRs are saved in
	64-bits for SPE.
	(debug_stack_info): Add SPE info.
	(gen_frame_mem_offset): New.
	(rs6000_emit_prologue): Save GPRs in 64-bits for SPE abi.
	Change mode of frame pointer, when saving it, to Pmode.
	(rs6000_emit_epilogue): Restore GPRs in 64-bits for SPE abi.
	Misc cleanups and use gen_frame_mem_offset when appropriate.

	* config/rs6000/rs6000.h (processor_type): Add PROCESSOR_PPC8540.
	(TARGET_SPE_ABI): New.
	(TARGET_SPE): New.
	(TARGET_ISEL): New.
	(TARGET_FPRS): New.
	(FIXED_SCRATCH): New.
	(RTX_COSTS): Add PROCESSOR_PPC8540.
	(ASM_CPU_SPEC): Add case for 8540.
	(TARGET_OPTIONS): Add isel= case.
	(rs6000_spe_abi): New.
	(rs6000_isel): New.
	(rs6000_fprs): New.
	(rs6000_isel_string): New.
	(UNITS_PER_SPE_WORD): New.
	(LOCAL_ALIGNMENT): Adjust for SPE.
	(HARD_REGNO_MODE_OK): Same.
	(DATA_ALIGNMENT): Same.
	(MEMBER_TYPE_FORCES_BLK): New.
	(FIRST_PSEUDO_REGISTER): Set to 113.
	(FIXED_REGISTERS): Add SPE registers.
	(reg_class): Same.
	(REG_CLASS_NAMES): Same.
	(REG_CLASS_CONTENTS): Same.
	(REGNO_REG_CLASS): Same.
	(REGISTER_NAMES): Same.
	(DEBUG_REGISTER_NAMES): Same.
	(ADDITIONAL_REGISTER_NAMES): Same.
	(CALL_USED_REGISTERS): Same.
	(CALL_REALLY_USED_REGISTERS): Same.
	(SPE_ACC_REGNO): New.
	(SPEFSCR_REGNO): New.
	(SPE_SIMD_REGNO_P): New.
	(HARD_REGNO_NREGS): Adjust for SPE.
	(VECTOR_MODE_SUPPORTED_P): Same.
	(REGNO_REG_CLASS): Same.
	(FUNCTION_VALUE): Same.
	(LIBCALL_VALUE): Same.
	(LEGITIMATE_OFFSET_ADDRESS_P): Same.
	(SPE_VECTOR_MODE): New.
	(CONDITIONAL_REGISTER_USAGE): Disable FPRs when target does FP on
	the GPRs.  Set FIXED_SCRATCH fixed in SPE case.
	(rs6000_stack): Add spe_gp_size, spe_padding_size,
	spe_gp_save_offset.
	(USE_FP_FOR_ARG_P): Check for TARGET_FPRS.
	(LEGITIMATE_LO_SUM_ADDRESS_P): Same.
	(SPE_CONST_OFFSET_OK): New.
	(rs6000_builtins): Add SPE builtins.

	* testsuite/gcc.dg/ppc-spe.c: New.

	* config/rs6000/eabispe.h: New.

	* config/rs6000/spe.h: New.

	* config/rs600/spe.md: New.

	* config/rs6000/rs6000-c.c (rs6000_cpu_cpp_builtins): Define
	__SIMD__ for TARGET_SPE.

	* config.gcc: Add powerpc-*-eabispe* case.
	Add spe.h to user headers for powerpc.

git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@55732 138bc75d-0d04-0410-961f-82ee72b054a4