$(srcdir)/Makefile.am
subdir = testsuite
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/../config/enable.m4 \
+am__aclocal_m4_deps = $(top_srcdir)/../config/acx.m4 \
+ $(top_srcdir)/../config/enable.m4 \
$(top_srcdir)/../config/futex.m4 \
$(top_srcdir)/../config/iconv.m4 \
$(top_srcdir)/../config/lead-dot.m4 \
$(top_srcdir)/../config/lib-ld.m4 \
$(top_srcdir)/../config/lib-link.m4 \
$(top_srcdir)/../config/lib-prefix.m4 \
+ $(top_srcdir)/../config/lthostflags.m4 \
$(top_srcdir)/../config/multi.m4 \
$(top_srcdir)/../config/no-executables.m4 \
$(top_srcdir)/../config/override.m4 \
$(top_srcdir)/../ltsugar.m4 $(top_srcdir)/../ltversion.m4 \
$(top_srcdir)/../lt~obsolete.m4 $(top_srcdir)/crossconfig.m4 \
$(top_srcdir)/linkage.m4 $(top_srcdir)/acinclude.m4 \
+ $(top_srcdir)/../config/gc++filt.m4 \
$(top_srcdir)/../config/tls.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
CTIME_H = @CTIME_H@
CXX = @CXX@
CXXCPP = @CXXCPP@
+CXXFILT = @CXXFILT@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
C_INCLUDE_DIR = @C_INCLUDE_DIR@
+DBLATEX = @DBLATEX@
DEBUG_FLAGS = @DEBUG_FLAGS@
DEFS = @DEFS@
+DOT = @DOT@
+DOXYGEN = @DOXYGEN@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
LIBICONV = @LIBICONV@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
-LIBSUPCXX_PICFLAGS = @LIBSUPCXX_PICFLAGS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
+PDFLATEX = @PDFLATEX@
+PIC_CXXFLAGS = @PIC_CXXFLAGS@
RANLIB = @RANLIB@
SECTION_FLAGS = @SECTION_FLAGS@
SECTION_LDFLAGS = @SECTION_LDFLAGS@
VERSION = @VERSION@
WARN_FLAGS = @WARN_FLAGS@
WERROR = @WERROR@
+XMLLINT = @XMLLINT@
+XSLTPROC = @XSLTPROC@
+XSL_STYLE_DIR = @XSL_STYLE_DIR@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
am__tar = @am__tar@
am__untar = @am__untar@
baseline_dir = @baseline_dir@
+baseline_subdir_switch = @baseline_subdir_switch@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
glibcxx_localedir = @glibcxx_localedir@
glibcxx_prefixdir = @glibcxx_prefixdir@
glibcxx_srcdir = @glibcxx_srcdir@
-glibcxx_thread_h = @glibcxx_thread_h@
glibcxx_toolexecdir = @glibcxx_toolexecdir@
glibcxx_toolexeclibdir = @glibcxx_toolexeclibdir@
gxx_include_dir = @gxx_include_dir@
libtool_VERSION = @libtool_VERSION@
localedir = @localedir@
localstatedir = @localstatedir@
+lt_host_flags = @lt_host_flags@
mandir = @mandir@
mkdir_p = @mkdir_p@
multi_basedir = @multi_basedir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
+python_mod_dir = @python_mod_dir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
+toplevel_builddir = @toplevel_builddir@
toplevel_srcdir = @toplevel_srcdir@
AUTOMAKE_OPTIONS = nostdinc
RUNTESTDEFAULTFLAGS = --tool $$tool --srcdir $$srcdir
STAMP = echo timestamp >
toolexecdir = $(glibcxx_toolexecdir)
toolexeclibdir = $(glibcxx_toolexeclibdir)
+@ENABLE_WERROR_FALSE@WERROR_FLAG =
+@ENABLE_WERROR_TRUE@WERROR_FLAG = $(WERROR)
# These bits are all figured out from configure. Look in acinclude.m4
# or configure.ac to see how they are set. See GLIBCXX_EXPORT_FLAGS.
CONFIG_CXXFLAGS = \
- $(SECTION_FLAGS) $(EXTRA_CXX_FLAGS)
+ $(SECTION_FLAGS) $(EXTRA_CXX_FLAGS) -frandom-seed=$@
WARN_CXXFLAGS = \
- $(WARN_FLAGS) $(WERROR) -fdiagnostics-show-location=once
+ $(WARN_FLAGS) $(WERROR_FLAG) -fdiagnostics-show-location=once
# -I/-D flags to pass when compiling.
testsuite_files_interactive \
testsuite_files_performance
-extract_symvers = $(glibcxx_srcdir)/scripts/extract_symvers
-check_DEJAGNU_normal_targets = $(patsubst %,check-DEJAGNUnormal%,0 1 2 3)
+extract_symvers = $(glibcxx_builddir)/scripts/extract_symvers
+baseline_subdir := $(shell $(CXX) $(baseline_subdir_switch))
+check_DEJAGNU_normal_targets = $(patsubst %,check-DEJAGNUnormal%,0 1 2 3 4 5 6 7 8 9)
# Runs the testsuite, but in compile only mode.
# Can be used to test sources with non-GNU FE's at various warning
# By adding these files here, automake will remove them for 'make clean'
CLEANFILES = *.txt *.tst *.exe core* filebuf_* tmp* ostream_* *.log *.sum \
testsuite_* site.exp abi_check baseline_symbols *TEST* *.dat \
- *.s *.o *.cc *.a *.so *.xml
+ *.ii *.s *.o *.cc *.x *.a *.so *.xml *.raw *.out
all: all-am
@echo 'set target_triplet $(target_triplet)' >>site.tmp
@echo 'set libiconv "$(LIBICONV)"' >>site.tmp
@echo 'set baseline_dir "$(baseline_dir)"' >> site.tmp
+ @echo 'set baseline_subdir_switch "$(baseline_subdir_switch)"' >> site.tmp
@echo '## All variables above are generated by configure. Do Not Edit ##' >>site.tmp
@test ! -f site.exp || \
sed '1,/^## All variables above are.*##/ d' site.exp >> site.tmp
@mv site.tmp site.exp
baseline_symbols:
- -@(output=${baseline_dir}/baseline_symbols.txt; \
+ -@(output=${baseline_dir}/${baseline_subdir}/baseline_symbols.txt; \
if test ! -f $${output}; then \
echo "Baseline file doesn't exist."; \
echo "Try 'make new-abi-baseline' to create it."; \
fi; true)
new-abi-baseline:
- -@$(mkinstalldirs) ${baseline_dir}
- -@(output=${baseline_dir}/baseline_symbols.txt; \
+ -@$(mkinstalldirs) ${baseline_dir}/${baseline_subdir}
+ -@(output=${baseline_dir}/${baseline_subdir}/baseline_symbols.txt; \
if test -f $${output}; then \
output=$${output}.new; \
t=`echo $${output} | sed 's=.*config/abi/=='`; \
RANLIB="$(RANLIB)"; export RANLIB; \
if [ -z "$*$(filter-out --target_board=%, $(RUNTESTFLAGS))" ] \
&& [ "$(filter -j, $(MFLAGS))" = "-j" ]; then \
- $(MAKE) $(AM_MAKEFLAGS) check-DEJAGNUnormal0 check-DEJAGNUnormal1 \
- check-DEJAGNUnormal2 check-DEJAGNUnormal3; \
- for idx in 0 1 2 3; do \
+ $(MAKE) $(AM_MAKEFLAGS) $(check_DEJAGNU_normal_targets); \
+ for idx in 0 1 2 3 4 5 6 7 8 9; do \
mv -f normal$$idx/libstdc++.sum normal$$idx/libstdc++.sum.sep; \
mv -f normal$$idx/libstdc++.log normal$$idx/libstdc++.log.sep; \
done; \
mv -f libstdc++.sum libstdc++.sum.sep; \
mv -f libstdc++.log libstdc++.log.sep; \
$(SHELL) $(srcdir)/../../contrib/dg-extract-results.sh \
- libstdc++.sum.sep normal0/libstdc++.sum.sep \
- normal1/libstdc++.sum.sep normal2/libstdc++.sum.sep \
- normal3/libstdc++.sum.sep > libstdc++.sum; \
+ libstdc++.sum.sep normal[0-9]/libstdc++.sum.sep > libstdc++.sum; \
$(SHELL) $(srcdir)/../../contrib/dg-extract-results.sh -L \
- libstdc++.log.sep normal0/libstdc++.log.sep \
- normal1/libstdc++.log.sep normal2/libstdc++.log.sep \
- normal3/libstdc++.log.sep > libstdc++.log; \
+ libstdc++.log.sep normal[0-9]/libstdc++.log.sep > libstdc++.log; \
exit 0; \
fi; \
srcdir=`$(am__cd) $(srcdir) && pwd`; export srcdir; \
$(RUNTESTFLAGS) abi.exp; \
else echo "WARNING: could not find \`runtest'" 1>&2; :;\
fi; \
- dirs="`cd $$srcdir; echo [013-9][0-9]_*/* [ab]* de* [ep]*/*`";; \
+ dirs="`cd $$srcdir; echo [013-9][0-9]_*/*`";; \
normal1) \
- dirs="`cd $$srcdir; echo 2[0-2]_*/*`";; \
+ dirs="`cd $$srcdir; echo [ab]* de* [ep]*/*`";; \
normal2) \
- dirs="`cd $$srcdir; echo 2[4-9]_*/*`";; \
+ dirs="`cd $$srcdir; echo 2[01]_*/*`";; \
normal3) \
- dirs="`cd $$srcdir; echo 23_*/* t*/*`";; \
+ dirs="`cd $$srcdir; echo 22_*/*`";; \
+ normal4) \
+ dirs="`cd $$srcdir; echo 23_*/[a-km-tw-z]*`";; \
+ normal5) \
+ dirs="`cd $$srcdir; echo 23_*/[luv]*`";; \
+ normal6) \
+ dirs="`cd $$srcdir; echo 2[459]_*/*`";; \
+ normal7) \
+ dirs="`cd $$srcdir; echo 2[68]_*/*`";; \
+ normal8) \
+ dirs="`cd $$srcdir; echo 27_*/*`";; \
+ normal9) \
+ dirs="`cd $$srcdir; echo t*/*`";; \
esac; \
if [ -n "$*" ]; then cd "$*"; fi; \
if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \
# To remove directories.
clean-local:
- rm -rf debug parallel profile
+ rm -rf de fr debug parallel profile binaries normal*
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
OSDN Git Service
