-# Makefile.in generated automatically by automake 1.4 from Makefile.am
+# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
target_triplet = @target@
AR = @AR@
AS = @AS@
+ATOMICITY_INC_SRCDIR = @ATOMICITY_INC_SRCDIR@
+BASIC_FILE_H = @BASIC_FILE_H@
+BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@
+CATALOGS = @CATALOGS@
+CATOBJEXT = @CATOBJEXT@
CC = @CC@
+CCODECVT_C = @CCODECVT_C@
+CCODECVT_H = @CCODECVT_H@
+CLOCALE_H = @CLOCALE_H@
+CMESSAGES_H = @CMESSAGES_H@
CPP = @CPP@
+CPU_LIMITS_INC_SRCDIR = @CPU_LIMITS_INC_SRCDIR@
CSHADOW_FLAGS = @CSHADOW_FLAGS@
-CSHADOW_INCLUDES = @CSHADOW_INCLUDES@
+CSTDIO_H = @CSTDIO_H@
CXX = @CXX@
CXXCPP = @CXXCPP@
C_INCLUDE_DIR = @C_INCLUDE_DIR@
+DATADIRNAME = @DATADIRNAME@
DEBUG_FLAGS = @DEBUG_FLAGS@
DLLTOOL = @DLLTOOL@
EXEEXT = @EXEEXT@
EXTRA_CXX_FLAGS = @EXTRA_CXX_FLAGS@
GCJ = @GCJ@
GCJFLAGS = @GCJFLAGS@
-GLIBCPP_CFLAGS = @GLIBCPP_CFLAGS@
-GLIBCPP_CXXFLAGS = @GLIBCPP_CXXFLAGS@
-GLIBCPP_INCLUDE_DIR = @GLIBCPP_INCLUDE_DIR@
+GENCAT = @GENCAT@
+GLIBC21 = @GLIBC21@
+GLIBCPP_INCLUDES = @GLIBCPP_INCLUDES@
+GLIBCPP_IS_CROSS_COMPILING = @GLIBCPP_IS_CROSS_COMPILING@
+GMOFILES = @GMOFILES@
+GMSGFMT = @GMSGFMT@
+INSTOBJEXT = @INSTOBJEXT@
+INTLBISON = @INTLBISON@
+INTLLIBS = @INTLLIBS@
+INTLOBJS = @INTLOBJS@
+INTL_LIBTOOL_SUFFIX_PREFIX = @INTL_LIBTOOL_SUFFIX_PREFIX@
+LIBICONV = @LIBICONV@
LIBIO_INCLUDES = @LIBIO_INCLUDES@
LIBMATHOBJS = @LIBMATHOBJS@
LIBMATH_INCLUDES = @LIBMATH_INCLUDES@
-LIBSTRINGOBJS = @LIBSTRINGOBJS@
LIBSUPCXX_INCLUDES = @LIBSUPCXX_INCLUDES@
+LIBSUPCXX_PICFLAGS = @LIBSUPCXX_PICFLAGS@
LIBTOOL = @LIBTOOL@
LN_S = @LN_S@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
+MKINSTALLDIRS = @MKINSTALLDIRS@
+MSGFMT = @MSGFMT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OPTIMIZE_CXXFLAGS = @OPTIMIZE_CXXFLAGS@
OPT_LDFLAGS = @OPT_LDFLAGS@
+OS_INC_SRCDIR = @OS_INC_SRCDIR@
PACKAGE = @PACKAGE@
+POFILES = @POFILES@
+POSUB = @POSUB@
RANLIB = @RANLIB@
SECTION_FLAGS = @SECTION_FLAGS@
SECTION_LDFLAGS = @SECTION_LDFLAGS@
STRIP = @STRIP@
TOPLEVEL_INCLUDES = @TOPLEVEL_INCLUDES@
USE_COMPLEX_LONG_DOUBLE = @USE_COMPLEX_LONG_DOUBLE@
+USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
+USE_NLS = @USE_NLS@
VERSION = @VERSION@
WARN_FLAGS = @WARN_FLAGS@
WERROR = @WERROR@
-WFMT_FLAGS = @WFMT_FLAGS@
enable_shared = @enable_shared@
enable_static = @enable_static@
-gcc_version = @gcc_version@
+glibcpp_CXX = @glibcpp_CXX@
+glibcpp_MOFILES = @glibcpp_MOFILES@
+glibcpp_POFILES = @glibcpp_POFILES@
glibcpp_basedir = @glibcpp_basedir@
+glibcpp_builddir = @glibcpp_builddir@
+glibcpp_localedir = @glibcpp_localedir@
+glibcpp_prefixdir = @glibcpp_prefixdir@
+glibcpp_srcdir = @glibcpp_srcdir@
+glibcpp_thread_h = @glibcpp_thread_h@
+glibcpp_toolexecdir = @glibcpp_toolexecdir@
+glibcpp_toolexeclibdir = @glibcpp_toolexeclibdir@
gxx_include_dir = @gxx_include_dir@
ifGNUmake = @ifGNUmake@
-libinst_wstring_la = @libinst_wstring_la@
-libstdcxx_interface = @libstdcxx_interface@
+libio_la = @libio_la@
+libtool_VERSION = @libtool_VERSION@
+release_VERSION = @release_VERSION@
+toplevel_srcdir = @toplevel_srcdir@
AUTOMAKE_OPTIONS = 1.3 cygnus
MAINT_CHARSET = latin1
-SUBDIRS = libio libmath libsupc++ src
+SUBDIRS = include libio libmath libsupc++ src po testsuite
+
+mkinstalldirs = $(SHELL) $(toplevel_srcdir)/mkinstalldirs
# Multilib support.
MAKEOVERRIDES =
"PICFLAG=$(PICFLAG)" \
"PICFLAG_FOR_TARGET=$(PICFLAG_FOR_TARGET)" \
"SHELL=$(SHELL)" \
- "EXPECT=$(EXPECT)" \
- "RUNTEST=$(RUNTEST)" \
"RUNTESTFLAGS=$(RUNTESTFLAGS)" \
"exec_prefix=$(exec_prefix)" \
"infodir=$(infodir)" \
"tooldir=$(tooldir)" \
"AR=$(AR)" \
"AS=$(AS)" \
- "CC=$(CC)" \
- "CXX=$(CXX)" \
"LD=$(LD)" \
"LIBCFLAGS=$(LIBCFLAGS)" \
"PICFLAG=$(PICFLAG)" \
"WERROR=$(WERROR)"
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
CONFIG_HEADER = config.h
-CONFIG_CLEAN_FILES = mkcheck
+CONFIG_CLEAN_FILES = mkcheck testsuite_flags
DIST_COMMON = README ./stamp-h.in ChangeLog Makefile.am Makefile.in \
acconfig.h acinclude.m4 aclocal.m4 config.h.in configure configure.in \
-mkcheck.in
+mkcheck.in testsuite_flags.in
DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-TAR = tar
+TAR = gtar
GZIP_ENV = --best
all: all-redirect
.SUFFIXES:
maintainer-clean-hdr:
mkcheck: $(top_builddir)/config.status mkcheck.in
cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
+testsuite_flags: $(top_builddir)/config.status testsuite_flags.in
+ cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
dot_seen=no; \
rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
rev="$$subdir $$rev"; \
- test "$$subdir" = "." && dot_seen=yes; \
+ test "$$subdir" != "." || dot_seen=yes; \
done; \
test "$$dot_seen" = "no" && rev=". $$rev"; \
target=`echo $@ | sed s/-recursive//`; \
@for file in $(DISTFILES); do \
if test -f $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
- cp -pr $$/$$file $(distdir)/$$file; \
+ cp -pr $$d/$$file $(distdir)/$$file; \
else \
test -f $(distdir)/$$file \
|| ln $$d/$$file $(distdir)/$$file 2> /dev/null \
mostlyclean distclean maintainer-clean
-# Use $(blddir) instead of $(top_builddir) for arguments to "mkcheck"
-# because then the paths will be full pathnames, not relative
-# pathnames. (-Wl,--rpath seems to like this better.)
-check: $(top_builddir)/mkcheck
- chmod +x $(top_builddir)/mkcheck
- $(top_builddir)/mkcheck 0 `pwd` $(top_srcdir)
-
-check-install: $(top_builddir)/mkcheck
- chmod +x $(top_builddir)/mkcheck
- $(top_builddir)/mkcheck 1 `pwd` $(top_srcdir) $(prefix)
+# These two special 'check-script' rules use the bash script 'mkcheck'
+# to do testing. This script is not as portable as the dejagnu test
+# harness, and is thus off by default. It does produce interesting
+# output however, including various performance analysis items like
+# compile time, execution time, and binary size.
+check-script: $(top_builddir)/mkcheck
+ -(chmod + $(top_builddir)/mkcheck; \
+ cd testsuite; \
+ @glibcpp_builddir@/mkcheck 0)
+
+check-script-install: $(top_builddir)/mkcheck
+ -(chmod + $(top_builddir)/mkcheck; \
+ cd testsuite; \
+ @glibcpp_builddir@/mkcheck 1)
+
+# These rules are messy, but are hella worth it.
+doxygen:
+ -(srcdir=`cd ${top_srcdir}; pwd`; \
+ builddir=`pwd`; \
+ /bin/sh ${srcdir}/docs/doxygen/run_doxygen \
+ --mode=user $${srcdir} $${builddir})
+
+doxygen-maint:
+ -(srcdir=`cd ${top_srcdir}; pwd`; \
+ builddir=`pwd`; \
+ /bin/sh ${srcdir}/docs/doxygen/run_doxygen \
+ --mode=maint $${srcdir} $${builddir})
+
+doxygen-man:
+ -(srcdir=`cd ${top_srcdir}; pwd`; \
+ builddir=`pwd`; \
+ /bin/sh ${srcdir}/docs/doxygen/run_doxygen \
+ --mode=man $${srcdir} $${builddir})
+
+.PHONY: doxygen doxygen-maint doxygen-man
# Multilib Makefile bits.
.PHONY: all-multi mostlyclean-multi clean-multi distclean-multi \
OSDN Git Service
