2001-07-13 Stephen M. Webb <stephen@bregmasoft.com>

[pf3gnuchains/gcc-fork.git] / libstdc++-v3 / Makefile.in

diff --git a/libstdc++-v3/Makefile.in b/libstdc++-v3/Makefile.in
index 8f0c6cc..2a976e4 100644 (file)
--- a/libstdc++-v3/Makefile.in
+++ b/libstdc++-v3/Makefile.in
@@ -65,10 +65,14 @@ target_alias = @target_alias@
 target_triplet = @target@
 AR = @AR@
 AS = @AS@
+ATOMICITY_INC_SRCDIR = @ATOMICITY_INC_SRCDIR@
+BASIC_FILE_H = @BASIC_FILE_H@
 CC = @CC@
+CCODECVT_C = @CCODECVT_C@
+CLOCALE_H = @CLOCALE_H@
 CPP = @CPP@
 CSHADOW_FLAGS = @CSHADOW_FLAGS@
-CSTD_INCLUDES = @CSTD_INCLUDES@
+CSTDIO_H = @CSTDIO_H@
 CXX = @CXX@
 CXXCPP = @CXXCPP@
 C_INCLUDE_DIR = @C_INCLUDE_DIR@
@@ -78,12 +82,14 @@ EXEEXT = @EXEEXT@
 EXTRA_CXX_FLAGS = @EXTRA_CXX_FLAGS@
 GCJ = @GCJ@
 GCJFLAGS = @GCJFLAGS@
-GLIBCPP_INCLUDE_DIR = @GLIBCPP_INCLUDE_DIR@
+GLIBCPP_INCLUDES = @GLIBCPP_INCLUDES@
+GLIBCPP_IS_CROSS_COMPILING = @GLIBCPP_IS_CROSS_COMPILING@
 LIBIO_INCLUDES = @LIBIO_INCLUDES@
 LIBMATHOBJS = @LIBMATHOBJS@
 LIBMATH_INCLUDES = @LIBMATH_INCLUDES@
 LIBSTRINGOBJS = @LIBSTRINGOBJS@
 LIBSUPCXX_INCLUDES = @LIBSUPCXX_INCLUDES@
+LIBSUPCXX_PICFLAGS = @LIBSUPCXX_PICFLAGS@
 LIBTOOL = @LIBTOOL@
 LN_S = @LN_S@
 MAINT = @MAINT@
@@ -92,6 +98,7 @@ OBJDUMP = @OBJDUMP@
 OBJEXT = @OBJEXT@
 OPTIMIZE_CXXFLAGS = @OPTIMIZE_CXXFLAGS@
 OPT_LDFLAGS = @OPT_LDFLAGS@
+OS_INC_SRCDIR = @OS_INC_SRCDIR@
 PACKAGE = @PACKAGE@
 RANLIB = @RANLIB@
 SECTION_FLAGS = @SECTION_FLAGS@
@@ -106,8 +113,10 @@ enable_shared = @enable_shared@
 enable_static = @enable_static@
 glibcpp_CXX = @glibcpp_CXX@
 glibcpp_basedir = @glibcpp_basedir@
-glibcpp_expect = @glibcpp_expect@
-glibcpp_runtest = @glibcpp_runtest@
+glibcpp_builddir = @glibcpp_builddir@
+glibcpp_prefixdir = @glibcpp_prefixdir@
+glibcpp_srcdir = @glibcpp_srcdir@
+glibcpp_thread_h = @glibcpp_thread_h@
 glibcpp_toolexecdir = @glibcpp_toolexecdir@
 glibcpp_toolexeclibdir = @glibcpp_toolexeclibdir@
 gxx_include_dir = @gxx_include_dir@
@@ -118,7 +127,7 @@ toplevel_srcdir = @toplevel_srcdir@
 AUTOMAKE_OPTIONS = 1.3 cygnus
 MAINT_CHARSET = latin1
 
-SUBDIRS = libio libmath libsupc++ src testsuite
+SUBDIRS = include libio libmath libsupc++ src testsuite
 
 mkinstalldirs = $(SHELL) $(toplevel_srcdir)/mkinstalldirs
 
@@ -156,6 +165,7 @@ AM_MAKEFLAGS = \
        "PICFLAG=$(PICFLAG)" \
        "PICFLAG_FOR_TARGET=$(PICFLAG_FOR_TARGET)" \
        "SHELL=$(SHELL)" \
+       "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
        "exec_prefix=$(exec_prefix)" \
        "infodir=$(infodir)" \
        "libdir=$(libdir)" \
@@ -176,10 +186,10 @@ AM_MAKEFLAGS = \
 
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 CONFIG_HEADER = config.h
-CONFIG_CLEAN_FILES =  tests_flags mkcheck
+CONFIG_CLEAN_FILES =  mkcheck testsuite_flags
 DIST_COMMON =  README ./stamp-h.in ChangeLog Makefile.am Makefile.in \
 acconfig.h acinclude.m4 aclocal.m4 config.h.in configure configure.in \
-mkcheck.in tests_flags.in
+mkcheck.in testsuite_flags.in
 
 
 DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
@@ -230,10 +240,10 @@ distclean-hdr:
        -rm -f config.h
 
 maintainer-clean-hdr:
-tests_flags: $(top_builddir)/config.status tests_flags.in
-       cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
 mkcheck: $(top_builddir)/config.status mkcheck.in
        cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
+testsuite_flags: $(top_builddir)/config.status testsuite_flags.in
+       cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
 
 # This directory's subdirectories are mostly independent; you can cd
 # into them and run `make' without going through this Makefile.
@@ -445,23 +455,24 @@ distclean-generic clean-generic maintainer-clean-generic clean \
 mostlyclean distclean maintainer-clean
 
 
-# Use $${builddir} instead of $(top_builddir) for arguments to "mkcheck"
-# because then the paths will be full pathnames, not relative
-# pathnames. (-Wl,--rpath seems to like this better.)
+# These two special 'check-script' rules use the bash script 'mkcheck'
+# to do testing. This script is not as portable as the dejagnu test
+# harness, and is thus off by default. It does produce interesting
+# output however, including various performance analysis items like
+# compile time, execution time, and binary size.
 check-script: $(top_builddir)/mkcheck
        -(chmod + $(top_builddir)/mkcheck; \
-         srcdir=`cd $(top_srcdir); pwd`; builddir=`pwd`; \
          test -d testsuite || (mkdir testsuite; chmod u+w testsuite); \
-         cd testsuite; $${builddir}/mkcheck 0 $${builddir} $${srcdir})
+         cd testsuite; \
+         @glibcpp_builddir@/mkcheck 0)
 
 check-script-install: $(top_builddir)/mkcheck
        -(chmod + $(top_builddir)/mkcheck; \
-         srcdir=`cd $(top_srcdir); pwd`; builddir=`pwd`; \
          test -d testsuite || (mkdir testsuite; chmod u+w testsuite); \
          cd testsuite; \
-         $${builddir}/mkcheck 1 $${builddir} $${srcdir} $(prefix))
+         @glibcpp_builddir@/mkcheck 1)
 
-# These two rules seem messy.
+# These two rules might seem messy, but are hella worth it.
 doxygen:
        -(srcdir=`cd ${top_srcdir}; pwd`; \
          outdir=`pwd`; \