2004-08-18 Matthias Klose <doko@debian.org>

[pf3gnuchains/gcc-fork.git] / libstdc++-v3 / Makefile.am

diff --git a/libstdc++-v3/Makefile.am b/libstdc++-v3/Makefile.am
index d17784b..d17fcca 100644 (file)
--- a/libstdc++-v3/Makefile.am
+++ b/libstdc++-v3/Makefile.am
@@ -22,105 +22,41 @@
 ## Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307,
 ## USA.
 
-AUTOMAKE_OPTIONS = 1.3 cygnus
-MAINT_CHARSET = latin1
+include $(top_srcdir)/fragment.am
 
-SUBDIRS = include libmath libsupc++ src po testsuite 
-
-mkinstalldirs = $(SHELL) $(toplevel_srcdir)/mkinstalldirs
-
-PWD = $${PWDCMD-pwd}
-
-# These two special 'check-script' rules use the bash script 'mkcheck'
-# to do testing. This script is not as portable as the dejagnu test
-# harness, and is thus off by default. It does produce interesting
-# output however, including various performance analysis items like
-# compile time, execution time, and binary size.
-check-script: $(top_builddir)/mkcheck
-       -(chmod + $(top_builddir)/mkcheck; \
-         cd testsuite; \
-         @glibcpp_builddir@/mkcheck 0)
-
-check-script-install: $(top_builddir)/mkcheck
-       -(chmod + $(top_builddir)/mkcheck; \
-         cd testsuite; \
-         @glibcpp_builddir@/mkcheck 1)
-
-# Use 'new-abi-baseline' to create an initial symbol file.  Then run
-# 'check-abi' to test for changes against that file.
-baseline_file = @baseline_file@
-check-abi: $(top_builddir)/testsuite/abi_check
-       -@(cd testsuite; \
-         @glibcpp_srcdir@/config/abi/extract_symvers \
-            ../src/.libs/libstdc++.so \
-            ./current_symbols.txt && \
-         ./abi_check --check ./current_symbols.txt ${baseline_file})
-
-new-abi-baseline:
-       -@(output=${baseline_file}; \
-         if test -f $${output}; then \
-           output=$${output}.new; \
-           t=`echo $${output} | sed 's=.*config/abi/=='`; \
-           echo "Baseline file already exists, writing to $${t} instead."; \
-         fi; \
-         @glibcpp_srcdir@/config/abi/extract_symvers \
-            src/.libs/libstdc++.so $${output})
+if GLIBCXX_HOSTED
+  hosted_source = libmath src po testsuite
+endif
+## Keep this list sync'd with acinclude.m4:GLIBCXX_CONFIGURE.
+SUBDIRS = include libsupc++ $(hosted_source)
 
 # These rules are messy, but are hella worth it.
 doxygen:
-       -(srcdir=`cd ${top_srcdir}; ${PWD}`; \
-         builddir=`${PWD}`; \
-         /bin/sh ${srcdir}/docs/doxygen/run_doxygen \
+       -(srcdir=`cd ${top_srcdir}; ${PWD_COMMAND}`; \
+         builddir=`${PWD_COMMAND}`; \
+         ${SHELL} ${srcdir}/docs/doxygen/run_doxygen \
                    --mode=user $${srcdir} $${builddir})
 
 doxygen-maint:
-       -(srcdir=`cd ${top_srcdir}; ${PWD}`; \
-         builddir=`${PWD}`; \
-         /bin/sh ${srcdir}/docs/doxygen/run_doxygen \
+       -(srcdir=`cd ${top_srcdir}; ${PWD_COMMAND}`; \
+         builddir=`${PWD_COMMAND}`; \
+         ${SHELL} ${srcdir}/docs/doxygen/run_doxygen \
                    --mode=maint $${srcdir} $${builddir})
 
 doxygen-man:
-       -(srcdir=`cd ${top_srcdir}; ${PWD}`; \
-         builddir=`${PWD}`; \
-         /bin/sh ${srcdir}/docs/doxygen/run_doxygen \
+       -(srcdir=`cd ${top_srcdir}; ${PWD_COMMAND}`; \
+         builddir=`${PWD_COMMAND}`; \
+         ${SHELL} ${srcdir}/docs/doxygen/run_doxygen \
                    --mode=man $${srcdir} $${builddir})
 
 .PHONY: doxygen doxygen-maint doxygen-man
 
-# Multilib support.
-MAKEOVERRIDES=
-
-# Multilib support variables.
-MULTISRCTOP =
-MULTIBUILDTOP =
-MULTIDIRS =
-MULTISUBDIR =
-MULTIDO = true
-MULTICLEAN = true
+# Handy forwarding targets.
+check-%:
+       cd testsuite && $(MAKE) $@
 
 # Multilib support.
-.PHONY: all-multi mostlyclean-multi clean-multi distclean-multi \
-       maintainer-clean-multi
-
-all-recursive: all-multi
-install-recursive: install-multi
-mostlyclean-recursive: mostlyclean-multi
-clean-recursive: clean-multi
-distclean-recursive: distclean-multi
-maintainer-clean-recursive: maintainer-clean-multi
-
-all-multi:
-       : $(MAKE) ; exec $(MULTIDO) $(AM_MAKEFLAGS) DO=all multi-do
-install-multi:
-       $(MULTIDO) $(AM_MAKEFLAGS) DO=install multi-do
-mostlyclean-multi:
-       $(MULTICLEAN) $(AM_MAKEFLAGS) DO=mostlyclean multi-clean
-clean-multi:
-       $(MULTICLEAN) $(AM_MAKEFLAGS) DO=clean multi-clean
-distclean-multi:
-       $(MULTICLEAN) $(AM_MAKEFLAGS) DO=distclean multi-clean
-maintainer-clean-multi:
-       $(MULTICLEAN) $(AM_MAKEFLAGS) DO=maintainer-clean multi-clean
+MAKEOVERRIDES=
 
 # All the machinations with string instantiations messes up the
 # automake-generated TAGS rule. Make a simple one here.
@@ -167,7 +103,7 @@ AM_MAKEFLAGS = \
        "NM_FOR_BUILD=$(NM_FOR_BUILD)" \
        "NM_FOR_TARGET=$(NM_FOR_TARGET)" \
        "DESTDIR=$(DESTDIR)" \
-       "WERROR=$(WERROR)" 
+       "WERROR=$(WERROR)"
 
 # Subdir rules rely on $(FLAGS_TO_PASS)
 FLAGS_TO_PASS = $(AM_MAKEFLAGS)