# include <unistd.h>
#endif"
-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os build_subdir host_subdir target_subdir VERSION OBJC_BOEHM_GC toplevel_srcdir host host_cpu host_vendor host_os target target_cpu target_vendor target_os target_noncanonical glibcpp_srcdir toolexecdir toolexeclibdir includedirname libext CC ac_ct_CC EXEEXT OBJEXT CFLAGS AS ac_ct_AS AR ac_ct_AR RANLIB ac_ct_RANLIB INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT LN_S STRIP ac_ct_STRIP LIBTOOL SET_MAKE CPP CPPFLAGS EGREP LIBOBJS LTLIBOBJS'
+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os build_subdir host_subdir target_subdir VERSION OBJC_BOEHM_GC OBJC_BOEHM_GC_INCLUDES toplevel_srcdir host host_cpu host_vendor host_os target target_cpu target_vendor target_os target_noncanonical glibcpp_srcdir toolexecdir toolexeclibdir includedirname libext CC ac_ct_CC EXEEXT OBJEXT extra_ldflags_libobjc CFLAGS AS ac_ct_AS AR ac_ct_AR RANLIB ac_ct_RANLIB INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT LN_S STRIP ac_ct_STRIP LIBTOOL SET_MAKE CPP CPPFLAGS EGREP LIBOBJS LTLIBOBJS'
ac_subst_files=''
# Initialize some variables set by options.
else
echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
fi
- cd $ac_popdir
+ cd "$ac_popdir"
done
fi
# We need the following definitions because AC_PROG_LIBTOOL relies on them
PACKAGE=libobjc
# Version is pulled out to make it a bit easier to change using sed.
-VERSION=1:0:0
+VERSION=2:0:0
# This works around the fact that libtool configuration may change LD
if test "${enable_objc_gc+set}" = set; then
enableval="$enable_objc_gc"
case $enable_objc_gc in
- no) OBJC_BOEHM_GC='' ;;
- *) OBJC_BOEHM_GC=libobjc_gc.la ;;
+ no)
+ OBJC_BOEHM_GC=''
+ OBJC_BOEHM_GC_INCLUDES=''
+ ;;
+ *)
+ OBJC_BOEHM_GC=libobjc_gc.la
+ OBJC_BOEHM_GC_INCLUDES='-I$(top_srcdir)/../boehm-gc/include -I../boehm-gc/include'
+ ;;
esac
else
- OBJC_BOEHM_GC=''
+ OBJC_BOEHM_GC=''; OBJC_BOEHM_GC_INCLUDES=''
fi;
+
# -----------
# Directories
# -----------
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
+# extra LD Flags which are required for targets
+case "${host}" in
+ *-darwin*)
+ # Darwin needs -single_module when linking libobjc
+ extra_ldflags_libobjc=-Wl,-single_module
+ ;;
+esac
+
+
if test -n "$ac_tool_prefix"; then
# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
+# find the maximum length of command line arguments
+echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5
+echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6
+if test "${lt_cv_sys_max_cmd_len+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ i=0
+ teststring="ABCD"
+
+ case $build_os in
+ msdosdjgpp*)
+ # On DJGPP, this test can blow up pretty badly due to problems in libc
+ # (any single argument exceeding 2000 bytes causes a buffer overrun
+ # during glob expansion). Even if it were fixed, the result of this
+ # check would be larger than it should be.
+ lt_cv_sys_max_cmd_len=12288; # 12K is about right
+ ;;
+
+ cygwin* | mingw*)
+ # On Win9x/ME, this test blows up -- it succeeds, but takes
+ # about 5 minutes as the teststring grows exponentially.
+ # Worse, since 9x/ME are not pre-emptively multitasking,
+ # you end up with a "frozen" computer, even though with patience
+ # the test eventually succeeds (with a max line length of 256k).
+ # Instead, let's just punt: use the minimum linelength reported by
+ # all of the supported platforms: 8192 (on NT/2K/XP).
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ amigaos*)
+ # On AmigaOS with pdksh, this test takes hours, literally.
+ # So we just punt and use a minimum line length of 8192.
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+ # This has been around since 386BSD, at least. Likely further.
+ if test -x /sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+ elif test -x /usr/sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+ else
+ lt_cv_sys_max_cmd_len=65536 # usable default for *BSD
+ fi
+ # And add a safety zone
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ ;;
+ esac
+
+fi
+
+if test -n "$lt_cv_sys_max_cmd_len" ; then
+ echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5
+echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6
+else
+ echo "$as_me:$LINENO: result: none" >&5
+echo "${ECHO_T}none" >&6
+fi
+
+
# Only perform the check for file, if the check method requires it
case $deplibs_check_method in
file_magic*)
case $host in
*-*-irix6*)
# Find out which ABI we are using.
- echo '#line 3698 "configure"' > conftest.$ac_ext
+ echo '#line 3769 "configure"' > conftest.$ac_ext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
cat conftest.err >&5
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
:
else
cat > conftest.$ac_ext << EOF
-#line 5126 "configure"
+#line 5191 "configure"
@interface Frob
@end
@implementation Frob
s,@target_subdir@,$target_subdir,;t t
s,@VERSION@,$VERSION,;t t
s,@OBJC_BOEHM_GC@,$OBJC_BOEHM_GC,;t t
+s,@OBJC_BOEHM_GC_INCLUDES@,$OBJC_BOEHM_GC_INCLUDES,;t t
s,@toplevel_srcdir@,$toplevel_srcdir,;t t
s,@host@,$host,;t t
s,@host_cpu@,$host_cpu,;t t
s,@ac_ct_CC@,$ac_ct_CC,;t t
s,@EXEEXT@,$EXEEXT,;t t
s,@OBJEXT@,$OBJEXT,;t t
+s,@extra_ldflags_libobjc@,$extra_ldflags_libobjc,;t t
s,@CFLAGS@,$CFLAGS,;t t
s,@AS@,$AS,;t t
s,@ac_ct_AS@,$ac_ct_AS,;t t
*) ac_INSTALL=$ac_top_builddir$INSTALL ;;
esac
- if test x"$ac_file" != x-; then
- { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
- rm -f "$ac_file"
- fi
# Let's still pretend it is `configure' which instantiates (i.e., don't
# use $as_me), people would be surprised to read:
# /* config.h. Generated by config.status. */
fi;;
esac
done` || { (exit 1); exit 1; }
+
+ if test x"$ac_file" != x-; then
+ { echo "$as_me:$LINENO: creating $ac_file" >&5
+echo "$as_me: creating $ac_file" >&6;}
+ rm -f "$ac_file"
+ fi
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF
sed "$ac_vpsub