+# Makefile for the libiberty library.
+# Originally written by K. Richard Pixley <rich@cygnus.com>.
#
-# Makefile
-# Copyright (C) 1990, 91-99, 2000, 2001, 2002, 2003, 2004
-# Free Software Foundation
+# Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
+# 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 Free Software
+# Foundation
#
# This file is part of the libiberty library.
# Libiberty is free software; you can redistribute it and/or
#
# You should have received a copy of the GNU Library General Public
# License along with libiberty; see the file COPYING.LIB. If not,
-# write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-# Boston, MA 02111-1307, USA.
-#
-
-# This file was written by K. Richard Pixley <rich@cygnus.com>.
-
-#
-# Makefile for libiberty directory
-#
+# write to the Free Software Foundation, Inc., 51 Franklin Street - Fifth Floor,
+# Boston, MA 02110-1301, USA.
libiberty_topdir = @libiberty_topdir@
srcdir = @srcdir@
CC = @CC@
CFLAGS = @CFLAGS@
-LIBCFLAGS = $(CFLAGS)
+CPPFLAGS = @CPPFLAGS@
RANLIB = @RANLIB@
MAKEINFO = @MAKEINFO@
PERL = @PERL@
-PICFLAG =
+PICFLAG = @PICFLAG@
MAKEOVERRIDES =
"AR_FLAGS=$(AR_FLAGS)" \
"CC=$(CC)" \
"CFLAGS=$(CFLAGS)" \
+ "CPPFLAGS=$(CPPFLAGS)" \
"DESTDIR=$(DESTDIR)" \
- "LIBCFLAGS=$(LIBCFLAGS)" \
"EXTRA_OFILES=$(EXTRA_OFILES)" \
"HDEFINES=$(HDEFINES)" \
"INSTALL=$(INSTALL)" \
SUBDIRS = testsuite
# FIXME: add @BUILD_INFO@ once we're sure it works for everyone.
-all: stamp-picdir $(TARGETLIB) needed-list required-list all-subdir
+all: stamp-picdir $(TARGETLIB) required-list all-subdir
@: $(MAKE) ; exec $(MULTIDO) $(FLAGS_TO_PASS) multi-do DO=all
.PHONY: check installcheck
INCDIR=$(srcdir)/$(MULTISRCTOP)../include
-COMPILE.c = $(CC) -c @DEFS@ $(LIBCFLAGS) -I. -I$(INCDIR) $(HDEFINES) @ac_libiberty_warn_cflags@
+COMPILE.c = $(CC) -c @DEFS@ $(CFLAGS) $(CPPFLAGS) -I. -I$(INCDIR) $(HDEFINES) @ac_libiberty_warn_cflags@
# Just to make sure we don't use a built-in rule with VPATH
.c.o:
calloc.c choose-temp.c clock.c concat.c cp-demangle.c \
cp-demint.c cplus-dem.c \
dyn-string.c \
- fdmatch.c ffs.c fibheap.c floatformat.c fnmatch.c \
+ fdmatch.c ffs.c fibheap.c filename_cmp.c floatformat.c \
+ fnmatch.c fopen_unlocked.c \
getcwd.c getopt.c getopt1.c getpagesize.c getpwd.c getruntime.c \
+ gettimeofday.c \
hashtab.c hex.c \
index.c insque.c \
lbasename.c \
lrealpath.c \
make-relative-prefix.c \
- make-temp-file.c md5.c memchr.c memcmp.c memcpy.c memmove.c \
- mempcpy.c memset.c mkstemps.c \
+ make-temp-file.c md5.c memchr.c memcmp.c memcpy.c memmem.c \
+ memmove.c mempcpy.c memset.c mkstemps.c \
objalloc.c obstack.c \
- partition.c \
- pex-djgpp.c pex-mpw.c pex-msdos.c pex-os2.c \
+ partition.c pexecute.c \
+ pex-common.c pex-djgpp.c pex-msdos.c pex-one.c \
pex-unix.c pex-win32.c \
physmem.c putenv.c \
random.c regex.c rename.c rindex.c \
- safe-ctype.c setenv.c sigsetmask.c snprintf.c sort.c spaces.c \
- splay-tree.c stpcpy.c stpncpy.c strcasecmp.c strchr.c strdup.c \
- strerror.c strncasecmp.c strncmp.c strrchr.c strsignal.c \
- strstr.c strtod.c strtol.c strtoul.c \
- ternary.c tmpnam.c \
+ safe-ctype.c setenv.c sha1.c sigsetmask.c snprintf.c sort.c \
+ spaces.c splay-tree.c stpcpy.c stpncpy.c strcasecmp.c \
+ strchr.c strdup.c strerror.c strncasecmp.c strncmp.c \
+ strrchr.c strsignal.c strstr.c strtod.c strtol.c strtoul.c \
+ strndup.c strverscmp.c \
+ tmpnam.c \
+ unlink-if-ordinary.c \
vasprintf.c vfork.c vfprintf.c vprintf.c vsnprintf.c vsprintf.c \
waitpid.c \
- xatexit.c xexit.c xmalloc.c xmemdup.c xstrdup.c xstrerror.c
+ xatexit.c xexit.c xmalloc.c xmemdup.c xstrdup.c xstrerror.c \
+ xstrndup.c
# These are always included in the library. The first four are listed
# first and by compile time to optimize parallel builds.
-REQUIRED_OFILES = ./regex.o ./cplus-dem.o ./cp-demangle.o ./md5.o \
+REQUIRED_OFILES = \
+ ./regex.o ./cplus-dem.o ./cp-demangle.o ./md5.o ./sha1.o \
./alloca.o ./argv.o \
./choose-temp.o ./concat.o ./cp-demint.o \
./dyn-string.o \
- ./fdmatch.o ./fibheap.o ./floatformat.o ./fnmatch.o \
+ ./fdmatch.o ./fibheap.o ./filename_cmp.o ./floatformat.o \
+ ./fnmatch.o ./fopen_unlocked.o \
./getopt.o ./getopt1.o ./getpwd.o ./getruntime.o \
./hashtab.o ./hex.o \
./lbasename.o ./lrealpath.o \
./make-relative-prefix.o ./make-temp-file.o \
./objalloc.o ./obstack.o \
- ./partition.o ./physmem.o @pexecute@ \
+ ./partition.o ./pexecute.o ./physmem.o \
+ ./pex-common.o ./pex-one.o @pexecute@ \
./safe-ctype.o ./sort.o ./spaces.o ./splay-tree.o ./strerror.o \
./strsignal.o \
- ./ternary.o \
+ ./unlink-if-ordinary.o \
./xatexit.o ./xexit.o ./xmalloc.o ./xmemdup.o ./xstrdup.o \
- ./xstrerror.o
+ ./xstrerror.o ./xstrndup.o
# These are all the objects that configure may add to the library via
# $funcs or EXTRA_OFILES. This list exists here only for "make
./calloc.o ./clock.o ./copysign.o \
./_doprnt.o \
./ffs.o \
- ./getcwd.o ./getpagesize.o \
+ ./getcwd.o ./getpagesize.o ./gettimeofday.o \
./index.o ./insque.o \
- ./memchr.o ./memcmp.o ./memcpy.o ./memmove.o ./mempcpy.o \
- ./memset.o ./mkstemps.o \
- ./pex-djgpp.o ./pex-mpw.o ./pex-msdos.o ./pex-os2.o \
+ ./memchr.o ./memcmp.o ./memcpy.o ./memmem.o ./memmove.o \
+ ./mempcpy.o ./memset.o ./mkstemps.o \
+ ./pex-djgpp.o ./pex-msdos.o \
./pex-unix.o ./pex-win32.o \
./putenv.o \
./random.o ./rename.o ./rindex.o \
./setenv.o ./sigsetmask.o ./snprintf.o ./stpcpy.o ./stpncpy.o \
./strcasecmp.o ./strchr.o ./strdup.o ./strncasecmp.o \
- ./strncmp.o ./strrchr.o ./strstr.o \
- ./strtod.o ./strtol.o ./strtoul.o \
+ ./strncmp.o ./strndup.o ./strrchr.o ./strstr.o \
+ ./strtod.o ./strtol.o ./strtoul.o ./strverscmp.o \
./tmpnam.o \
./vasprintf.o ./vfork.o ./vfprintf.o ./vprintf.o ./vsnprintf.o \
./vsprintf.o \
$(INCDIR)/partition.h \
$(INCDIR)/safe-ctype.h \
$(INCDIR)/sort.h \
- $(INCDIR)/splay-tree.h \
- $(INCDIR)/ternary.h
+ $(INCDIR)/splay-tree.h
$(TARGETLIB): $(REQUIRED_OFILES) $(EXTRA_OFILES) $(LIBOBJS)
-rm -f $(TARGETLIB) pic/$(TARGETLIB)
install-info: install-info-subdir
clean-info: clean-info-subdir
dvi: libiberty.dvi dvi-subdir
-html: libiberty.html
+
+LIBIBERTY_PDFFILES = libiberty.pdf
+
+pdf: $(LIBIBERTY_PDFFILES) pdf-subdir
+
+.PHONY: install-pdf
+
+pdf__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+
+install-pdf: $(LIBIBERTY_PDFFILES)
+ @$(NORMAL_INSTALL)
+ test -z "$(pdfdir)" || $(mkinstalldirs) "$(DESTDIR)$(pdfdir)"
+ @list='$(LIBIBERTY_PDFFILES)'; for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ f=$(pdf__strip_dir) \
+ echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/$$f'"; \
+ $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/$$f"; \
+ done
+
+# html, install-html targets
+HTMLS = libiberty.html
+
+html: $(HTMLS)
+
+.PHONY: install-html install-html-am install-html-recursive
+
+NORMAL_INSTALL = :
+mkdir_p = mkdir -p --
+
+html__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+
+install-html: install-html-recursive install-html-am
+
+install-html-am: $(HTMLS)
+ @$(NORMAL_INSTALL)
+ test -z "$(htmldir)" || $(mkdir_p) "$(DESTDIR)$(htmldir)"
+ @list='$(HTMLS)'; for p in $$list; do \
+ if test -f "$$p" || test -d "$$p"; then d=""; else d="$(srcdir)/"; fi; \
+ f=$(html__strip_dir) \
+ if test -d "$$d$$p"; then \
+ echo " $(mkdir_p) '$(DESTDIR)$(htmldir)/$$f'"; \
+ $(mkdir_p) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
+ echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
+ $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \
+ else \
+ echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \
+ $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \
+ fi; \
+ done
+
+install-html-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
TEXISRC = \
$(srcdir)/libiberty.texi \
libiberty.dvi : $(srcdir)/libiberty.texi $(TEXISRC)
texi2dvi $(srcdir)/libiberty.texi
+libiberty.pdf : $(srcdir)/libiberty.texi $(TEXISRC)
+ texi2pdf $(srcdir)/libiberty.texi
+
libiberty.html : $(srcdir)/libiberty.texi $(TEXISRC)
$(MAKEINFO) --no-split --html -I$(srcdir) -o $@ $<
@MAINT@$(srcdir)/functions.texi : stamp-functions
@MAINT@ @true
-@MAINT@stamp-functions : $(CFILES) $(TEXIFILES) $(srcdir)/gather-docs Makefile
+@MAINT@stamp-functions : $(CFILES:%=$(srcdir)/%) $(TEXIFILES:%=$(srcdir)/%) $(srcdir)/gather-docs Makefile
@MAINT@@HAVE_PERL@ $(PERL) $(srcdir)/gather-docs $(srcdir) $(srcdir)/functions.texi $(CFILES) $(TEXIFILES)
@MAINT@ echo stamp > stamp-functions
INSTALL_DEST = @INSTALL_DEST@
install: install_to_$(INSTALL_DEST) install-subdir
+# This is tricky. Even though CC in the Makefile contains
+# multilib-specific flags, it's overridden by FLAGS_TO_PASS from the
+# default multilib, so we have to take CFLAGS into account as well,
+# since it will be passed the multilib flags.
+MULTIOSDIR = `$(CC) $(CFLAGS) -print-multi-os-directory`
install_to_libdir: all
- ${mkinstalldirs} $(DESTDIR)$(libdir)$(MULTISUBDIR)
- $(INSTALL_DATA) $(TARGETLIB) $(DESTDIR)$(libdir)$(MULTISUBDIR)/$(TARGETLIB)n
- ( cd $(DESTDIR)$(libdir)$(MULTISUBDIR) ; $(RANLIB) $(TARGETLIB)n )
- mv -f $(DESTDIR)$(libdir)$(MULTISUBDIR)/$(TARGETLIB)n $(DESTDIR)$(libdir)$(MULTISUBDIR)/$(TARGETLIB)
+ ${mkinstalldirs} $(DESTDIR)$(libdir)/$(MULTIOSDIR)
+ $(INSTALL_DATA) $(TARGETLIB) $(DESTDIR)$(libdir)/$(MULTIOSDIR)/$(TARGETLIB)n
+ ( cd $(DESTDIR)$(libdir)/$(MULTIOSDIR) ; chmod 644 $(TARGETLIB)n ;$(RANLIB) $(TARGETLIB)n )
+ mv -f $(DESTDIR)$(libdir)/$(MULTIOSDIR)/$(TARGETLIB)n $(DESTDIR)$(libdir)/$(MULTIOSDIR)/$(TARGETLIB)
if test -n "${target_header_dir}"; then \
case "${target_header_dir}" in \
/*) thd=${target_header_dir};; \
- *) thd=${includedir}${MULTISUBDIR}/${target_header_dir};; \
+ *) thd=${includedir}/${target_header_dir};; \
esac; \
${mkinstalldirs} $(DESTDIR)$${thd}; \
for h in ${INSTALLED_HEADERS}; do \
fi
@$(MULTIDO) $(FLAGS_TO_PASS) multi-do DO=install
-# This is tricky. Even though CC in the Makefile contains
-# multilib-specific flags, it's overridden by FLAGS_TO_PASS from the
-# default multilib, so we have to take LIBCFLAGS into account as well,
-# since it will be passed the multilib flags.
-MULTIOSDIR = `$(CC) $(LIBCFLAGS) -print-multi-os-directory`
install_to_tooldir: all
${mkinstalldirs} $(DESTDIR)$(tooldir)/lib/$(MULTIOSDIR)
$(INSTALL_DATA) $(TARGETLIB) $(DESTDIR)$(tooldir)/lib/$(MULTIOSDIR)/$(TARGETLIB)n
- ( cd $(DESTDIR)$(tooldir)/lib/$(MULTIOSDIR) ; $(RANLIB) $(TARGETLIB)n )
+ ( cd $(DESTDIR)$(tooldir)/lib/$(MULTIOSDIR) ; chmod 644 $(TARGETLIB)n; $(RANLIB) $(TARGETLIB)n )
mv -f $(DESTDIR)$(tooldir)/lib/$(MULTIOSDIR)/$(TARGETLIB)n $(DESTDIR)$(tooldir)/lib/$(MULTIOSDIR)/$(TARGETLIB)
@$(MULTIDO) $(FLAGS_TO_PASS) multi-do DO=install
-# needed-list is used by libstdc++. NEEDED is the list of functions
-# to include there. Do not add anything LGPL to this list; libstdc++
-# can't use anything encumbering.
-NEEDED = atexit calloc memchr memcmp memcpy memmove memset rename strchr \
- strerror strncmp strrchr strstr strtol strtoul tmpnam vfprintf vprintf \
- vfork waitpid bcmp bcopy bzero
-needed-list: Makefile
- rm -f needed-list; touch needed-list; \
- for f in $(NEEDED); do \
- for g in $(LIBOBJS) $(EXTRA_OFILES); do \
- case "$$g" in \
- *$$f*) echo $$g >> needed-list ;; \
- esac; \
- done; \
- done
-
# required-list was used when building a shared bfd/opcodes/libiberty
# library. I don't know if it used by anything currently.
required-list: Makefile
# multiple times, hence our explicit recursion with an empty SUBDIRS.
mostlyclean: mostlyclean-subdir
-rm -rf *.o pic core errs \#* *.E a.out
- -rm -f needed.awk needed2.awk errors dummy needed-list config.h stamp-*
- -rm -f $(CONFIG_H) $(NEEDED_LIST) stamp-picdir
+ -rm -f errors dummy config.h stamp-*
+ -rm -f $(CONFIG_H) stamp-picdir
-rm -f libiberty.aux libiberty.cp libiberty.cps libiberty.fn libiberty.ky
-rm -f libiberty.log libiberty.tmp libiberty.tps libiberty.pg
-rm -f libiberty.pgs libiberty.toc libiberty.tp libiberty.tpl libiberty.vr
clean: clean-subdir
$(MAKE) SUBDIRS="" mostlyclean
-rm -f *.a required-list tmpmulti.out
- -rm -f libiberty.dvi libiberty.info* libiberty.html
+ -rm -f libiberty.dvi libiberty.pdf libiberty.info* libiberty.html
@$(MULTICLEAN) multi-clean DO=clean
distclean: distclean-subdir
$(MAKE) SUBDIRS="" clean
stamp-h: $(srcdir)/config.in config.status Makefile
CONFIG_FILES= CONFIG_HEADERS=config.h:$(srcdir)/config.in $(SHELL) ./config.status
-config.status: $(srcdir)/configure $(srcdir)/config.table
+config.status: $(srcdir)/configure
$(SHELL) ./config.status --recheck
# Depending on config.h makes sure that config.status has been re-run
# if needed. This prevents problems with parallel builds, in case
# subdirectories need to run config.status also.
all-subdir check-subdir installcheck-subdir info-subdir \
-install-info-subdir clean-info-subdir dvi-subdir install-subdir \
+install-info-subdir clean-info-subdir dvi-subdir pdf-subdir install-subdir \
etags-subdir mostlyclean-subdir clean-subdir distclean-subdir \
maintainer-clean-subdir: config.h
@subdirs='$(SUBDIRS)'; \
$(REQUIRED_OFILES) $(EXTRA_OFILES) $(LIBOBJS): stamp-picdir
$(CONFIGURED_OFILES): stamp-picdir
+# Don't export variables to the environment, in order to not confuse
+# configure.
+.NOEXPORT:
+
# The dependencies in the remainder of this file are automatically
# generated by "make maint-deps". Manual edits will be lost.
else true; fi
$(COMPILE.c) $(srcdir)/alloca.c $(OUTPUT_OPTION)
-./argv.o: $(srcdir)/argv.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
+./argv.o: $(srcdir)/argv.c config.h $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h \
+ $(INCDIR)/safe-ctype.h
if [ x"$(PICFLAG)" != x ]; then \
$(COMPILE.c) $(PICFLAG) $(srcdir)/argv.c -o pic/$@; \
else true; fi
$(COMPILE.c) $(srcdir)/argv.c $(OUTPUT_OPTION)
-./asprintf.o: $(srcdir)/asprintf.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
+./asprintf.o: $(srcdir)/asprintf.c config.h $(INCDIR)/ansidecl.h \
+ $(INCDIR)/libiberty.h
if [ x"$(PICFLAG)" != x ]; then \
$(COMPILE.c) $(PICFLAG) $(srcdir)/asprintf.c -o pic/$@; \
else true; fi
else true; fi
$(COMPILE.c) $(srcdir)/atexit.c $(OUTPUT_OPTION)
-./basename.o: $(srcdir)/basename.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h \
- $(INCDIR)/safe-ctype.h
+./basename.o: $(srcdir)/basename.c config.h $(INCDIR)/ansidecl.h \
+ $(INCDIR)/libiberty.h $(INCDIR)/safe-ctype.h
if [ x"$(PICFLAG)" != x ]; then \
$(COMPILE.c) $(PICFLAG) $(srcdir)/basename.c -o pic/$@; \
else true; fi
else true; fi
$(COMPILE.c) $(srcdir)/dyn-string.c $(OUTPUT_OPTION)
-./fdmatch.o: $(srcdir)/fdmatch.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
+./fdmatch.o: $(srcdir)/fdmatch.c config.h $(INCDIR)/ansidecl.h \
+ $(INCDIR)/libiberty.h
if [ x"$(PICFLAG)" != x ]; then \
$(COMPILE.c) $(PICFLAG) $(srcdir)/fdmatch.c -o pic/$@; \
else true; fi
else true; fi
$(COMPILE.c) $(srcdir)/fibheap.c $(OUTPUT_OPTION)
+./filename_cmp.o: $(srcdir)/filename_cmp.c config.h $(INCDIR)/filenames.h \
+ $(INCDIR)/safe-ctype.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/filename_cmp.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/filename_cmp.c $(OUTPUT_OPTION)
+
./floatformat.o: $(srcdir)/floatformat.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/floatformat.h $(INCDIR)/libiberty.h
if [ x"$(PICFLAG)" != x ]; then \
else true; fi
$(COMPILE.c) $(srcdir)/fnmatch.c $(OUTPUT_OPTION)
+./fopen_unlocked.o: $(srcdir)/fopen_unlocked.c config.h $(INCDIR)/ansidecl.h \
+ $(INCDIR)/libiberty.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/fopen_unlocked.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/fopen_unlocked.c $(OUTPUT_OPTION)
+
./getcwd.o: $(srcdir)/getcwd.c config.h
if [ x"$(PICFLAG)" != x ]; then \
$(COMPILE.c) $(PICFLAG) $(srcdir)/getcwd.c -o pic/$@; \
else true; fi
$(COMPILE.c) $(srcdir)/getcwd.c $(OUTPUT_OPTION)
-./getopt.o: $(srcdir)/getopt.c config.h $(INCDIR)/getopt.h
+./getopt.o: $(srcdir)/getopt.c config.h $(INCDIR)/ansidecl.h $(INCDIR)/getopt.h
if [ x"$(PICFLAG)" != x ]; then \
$(COMPILE.c) $(PICFLAG) $(srcdir)/getopt.c -o pic/$@; \
else true; fi
else true; fi
$(COMPILE.c) $(srcdir)/getruntime.c $(OUTPUT_OPTION)
+./gettimeofday.o: $(srcdir)/gettimeofday.c config.h $(INCDIR)/ansidecl.h \
+ $(INCDIR)/libiberty.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/gettimeofday.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/gettimeofday.c $(OUTPUT_OPTION)
+
./hashtab.o: $(srcdir)/hashtab.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/hashtab.h $(INCDIR)/libiberty.h
if [ x"$(PICFLAG)" != x ]; then \
else true; fi
$(COMPILE.c) $(srcdir)/hashtab.c $(OUTPUT_OPTION)
-./hex.o: $(srcdir)/hex.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h \
+./hex.o: $(srcdir)/hex.c config.h $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h \
$(INCDIR)/safe-ctype.h
if [ x"$(PICFLAG)" != x ]; then \
$(COMPILE.c) $(PICFLAG) $(srcdir)/hex.c -o pic/$@; \
else true; fi
$(COMPILE.c) $(srcdir)/insque.c $(OUTPUT_OPTION)
-./lbasename.o: $(srcdir)/lbasename.c $(INCDIR)/ansidecl.h $(INCDIR)/filenames.h \
- $(INCDIR)/libiberty.h $(INCDIR)/safe-ctype.h
+./lbasename.o: $(srcdir)/lbasename.c config.h $(INCDIR)/ansidecl.h \
+ $(INCDIR)/filenames.h $(INCDIR)/libiberty.h \
+ $(INCDIR)/safe-ctype.h
if [ x"$(PICFLAG)" != x ]; then \
$(COMPILE.c) $(PICFLAG) $(srcdir)/lbasename.c -o pic/$@; \
else true; fi
else true; fi
$(COMPILE.c) $(srcdir)/memcpy.c $(OUTPUT_OPTION)
+./memmem.o: $(srcdir)/memmem.c config.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/memmem.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/memmem.c $(OUTPUT_OPTION)
+
./memmove.o: $(srcdir)/memmove.c $(INCDIR)/ansidecl.h
if [ x"$(PICFLAG)" != x ]; then \
$(COMPILE.c) $(PICFLAG) $(srcdir)/memmove.c -o pic/$@; \
else true; fi
$(COMPILE.c) $(srcdir)/mkstemps.c $(OUTPUT_OPTION)
-./mpw.o: $(srcdir)/mpw.c
- if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/mpw.c -o pic/$@; \
- else true; fi
- $(COMPILE.c) $(srcdir)/mpw.c $(OUTPUT_OPTION)
-
./msdos.o: $(srcdir)/msdos.c
if [ x"$(PICFLAG)" != x ]; then \
$(COMPILE.c) $(PICFLAG) $(srcdir)/msdos.c -o pic/$@; \
else true; fi
$(COMPILE.c) $(srcdir)/partition.c $(OUTPUT_OPTION)
-./pex-djgpp.o: $(srcdir)/pex-djgpp.c config.h $(INCDIR)/ansidecl.h \
+./pex-common.o: $(srcdir)/pex-common.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h $(srcdir)/pex-common.h
if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/pex-djgpp.c -o pic/$@; \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/pex-common.c -o pic/$@; \
else true; fi
- $(COMPILE.c) $(srcdir)/pex-djgpp.c $(OUTPUT_OPTION)
+ $(COMPILE.c) $(srcdir)/pex-common.c $(OUTPUT_OPTION)
-./pex-mpw.o: $(srcdir)/pex-mpw.c config.h $(INCDIR)/ansidecl.h \
+./pex-djgpp.o: $(srcdir)/pex-djgpp.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h $(srcdir)/pex-common.h
if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/pex-mpw.c -o pic/$@; \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/pex-djgpp.c -o pic/$@; \
else true; fi
- $(COMPILE.c) $(srcdir)/pex-mpw.c $(OUTPUT_OPTION)
+ $(COMPILE.c) $(srcdir)/pex-djgpp.c $(OUTPUT_OPTION)
./pex-msdos.o: $(srcdir)/pex-msdos.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h $(srcdir)/pex-common.h \
else true; fi
$(COMPILE.c) $(srcdir)/pex-msdos.c $(OUTPUT_OPTION)
-./pex-os2.o: $(srcdir)/pex-os2.c config.h $(INCDIR)/ansidecl.h \
- $(INCDIR)/libiberty.h $(srcdir)/pex-common.h
+./pex-one.o: $(srcdir)/pex-one.c config.h $(INCDIR)/ansidecl.h \
+ $(INCDIR)/libiberty.h
if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/pex-os2.c -o pic/$@; \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/pex-one.c -o pic/$@; \
else true; fi
- $(COMPILE.c) $(srcdir)/pex-os2.c $(OUTPUT_OPTION)
+ $(COMPILE.c) $(srcdir)/pex-one.c $(OUTPUT_OPTION)
./pex-unix.o: $(srcdir)/pex-unix.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h $(srcdir)/pex-common.h
else true; fi
$(COMPILE.c) $(srcdir)/pex-win32.c $(OUTPUT_OPTION)
+./pexecute.o: $(srcdir)/pexecute.c config.h $(INCDIR)/ansidecl.h \
+ $(INCDIR)/libiberty.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/pexecute.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/pexecute.c $(OUTPUT_OPTION)
+
./physmem.o: $(srcdir)/physmem.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h
if [ x"$(PICFLAG)" != x ]; then \
else true; fi
$(COMPILE.c) $(srcdir)/setenv.c $(OUTPUT_OPTION)
+./sha1.o: $(srcdir)/sha1.c config.h $(INCDIR)/ansidecl.h $(INCDIR)/sha1.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/sha1.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/sha1.c $(OUTPUT_OPTION)
+
./sigsetmask.o: $(srcdir)/sigsetmask.c $(INCDIR)/ansidecl.h
if [ x"$(PICFLAG)" != x ]; then \
$(COMPILE.c) $(PICFLAG) $(srcdir)/sigsetmask.c -o pic/$@; \
else true; fi
$(COMPILE.c) $(srcdir)/sort.c $(OUTPUT_OPTION)
-./spaces.o: $(srcdir)/spaces.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
+./spaces.o: $(srcdir)/spaces.c config.h $(INCDIR)/ansidecl.h \
+ $(INCDIR)/libiberty.h
if [ x"$(PICFLAG)" != x ]; then \
$(COMPILE.c) $(PICFLAG) $(srcdir)/spaces.c -o pic/$@; \
else true; fi
else true; fi
$(COMPILE.c) $(srcdir)/strncmp.c $(OUTPUT_OPTION)
+./strndup.o: $(srcdir)/strndup.c $(INCDIR)/ansidecl.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/strndup.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/strndup.c $(OUTPUT_OPTION)
+
./strrchr.o: $(srcdir)/strrchr.c $(INCDIR)/ansidecl.h
if [ x"$(PICFLAG)" != x ]; then \
$(COMPILE.c) $(PICFLAG) $(srcdir)/strrchr.c -o pic/$@; \
else true; fi
$(COMPILE.c) $(srcdir)/strtoul.c $(OUTPUT_OPTION)
-./ternary.o: $(srcdir)/ternary.c config.h $(INCDIR)/ansidecl.h \
- $(INCDIR)/libiberty.h $(INCDIR)/ternary.h
+./strverscmp.o: $(srcdir)/strverscmp.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h \
+ $(INCDIR)/safe-ctype.h
if [ x"$(PICFLAG)" != x ]; then \
- $(COMPILE.c) $(PICFLAG) $(srcdir)/ternary.c -o pic/$@; \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/strverscmp.c -o pic/$@; \
else true; fi
- $(COMPILE.c) $(srcdir)/ternary.c $(OUTPUT_OPTION)
+ $(COMPILE.c) $(srcdir)/strverscmp.c $(OUTPUT_OPTION)
./tmpnam.o: $(srcdir)/tmpnam.c
if [ x"$(PICFLAG)" != x ]; then \
else true; fi
$(COMPILE.c) $(srcdir)/tmpnam.c $(OUTPUT_OPTION)
+./unlink-if-ordinary.o: $(srcdir)/unlink-if-ordinary.c config.h \
+ $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/unlink-if-ordinary.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/unlink-if-ordinary.c $(OUTPUT_OPTION)
+
./vasprintf.o: $(srcdir)/vasprintf.c config.h $(INCDIR)/ansidecl.h \
$(INCDIR)/libiberty.h
if [ x"$(PICFLAG)" != x ]; then \
else true; fi
$(COMPILE.c) $(srcdir)/vsprintf.c $(OUTPUT_OPTION)
-./waitpid.o: $(srcdir)/waitpid.c config.h
+./waitpid.o: $(srcdir)/waitpid.c config.h $(INCDIR)/ansidecl.h
if [ x"$(PICFLAG)" != x ]; then \
$(COMPILE.c) $(PICFLAG) $(srcdir)/waitpid.c -o pic/$@; \
else true; fi
$(COMPILE.c) $(srcdir)/waitpid.c $(OUTPUT_OPTION)
-./xatexit.o: $(srcdir)/xatexit.c $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h
+./xatexit.o: $(srcdir)/xatexit.c config.h $(INCDIR)/ansidecl.h \
+ $(INCDIR)/libiberty.h
if [ x"$(PICFLAG)" != x ]; then \
$(COMPILE.c) $(PICFLAG) $(srcdir)/xatexit.c -o pic/$@; \
else true; fi
else true; fi
$(COMPILE.c) $(srcdir)/xstrerror.c $(OUTPUT_OPTION)
-# Don't export variables to the environment, in order to not confuse
-# configure.
-.NOEXPORT:
+./xstrndup.o: $(srcdir)/xstrndup.c config.h $(INCDIR)/ansidecl.h \
+ $(INCDIR)/libiberty.h
+ if [ x"$(PICFLAG)" != x ]; then \
+ $(COMPILE.c) $(PICFLAG) $(srcdir)/xstrndup.c -o pic/$@; \
+ else true; fi
+ $(COMPILE.c) $(srcdir)/xstrndup.c $(OUTPUT_OPTION)
+