#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.12.1
+# Generated automatically using autoconf version 2.13
# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
#
# This configure script is free software; the Free Software Foundation
ac_help=
ac_default_prefix=/usr/local
# Any additions from configure.in:
+ac_help="$ac_help
+ --enable-shared[=PKGS] build shared libraries [default=yes]"
+ac_help="$ac_help
+ --enable-static[=PKGS] build static libraries [default=yes]"
+ac_help="$ac_help
+ --enable-fast-install[=PKGS] optimize for fast installation [default=yes]"
+ac_help="$ac_help
+ --with-gnu-ld assume the C compiler uses GNU ld [default=no]"
+ac_help="$ac_help
+ --disable-libtool-lock avoid locking (might break parallel builds)"
+ac_help="$ac_help
+ --with-pic try to use only PIC/non-PIC objects [default=use both]"
# Initialize some variables set by options.
# The variables have the same names as the options, with
program_transform_name=s,x,x,
silent=
site=
+sitefile=
srcdir=
target=NONE
verbose=
--help print this message
--no-create do not create output files
--quiet, --silent do not print \`checking...' messages
+ --site-file=FILE use FILE as the site file
--version print the version of autoconf that created configure
Directory and file names:
--prefix=PREFIX install architecture-independent files in PREFIX
-site=* | --site=* | --sit=*)
site="$ac_optarg" ;;
+ -site-file | --site-file | --site-fil | --site-fi | --site-f)
+ ac_prev=sitefile ;;
+ -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
+ sitefile="$ac_optarg" ;;
+
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
verbose=yes ;;
-version | --version | --versio | --versi | --vers)
- echo "configure generated by autoconf version 2.12.1"
+ echo "configure generated by autoconf version 2.13"
exit 0 ;;
-with-* | --with-*)
srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
# Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
- if test "x$prefix" != xNONE; then
- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
- else
- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+if test -z "$sitefile"; then
+ if test -z "$CONFIG_SITE"; then
+ if test "x$prefix" != xNONE; then
+ CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+ else
+ CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+ fi
fi
+else
+ CONFIG_SITE="$sitefile"
fi
for ac_site_file in $CONFIG_SITE; do
if test -r "$ac_site_file"; then
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross
+ac_exeext=
+ac_objext=o
if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
# Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-# If the language specific compiler does not exist, but the "gcc" directory does,
-# we do not build anything. Note, $r is set by the top-level Makefile.
+# If the language specific compiler does not exist, but the "gcc" directory
+# does, we do not build anything. Note, $r is set by the top-level Makefile.
+# Note that when we look for the compiler, we search both with and without
+# extension to handle cross and canadian cross builds.
compiler_name=f771
rm -f skip-this-dir
echo $ac_n "checking if compiler $compiler_name has been built""... $ac_c" 1>&6
-echo "configure:558: checking if compiler $compiler_name has been built" >&5
-if eval "test \"`echo '$''{'f77_cv_compiler_exists'+set}'`\" = set"; then
+echo "configure:585: checking if compiler $compiler_name has been built" >&5
+if eval "test \"`echo '$''{'g77_cv_compiler_exists'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ g77_cv_compiler_exists=yes
+if test -n "$r"; then
+ if test -d "$r"/gcc; then
+ if test -f "$r"/gcc/$compiler_name \
+ || test -f "$r"/gcc/$compiler_name.exe; then
+ true
+ else
+ g77_cv_compiler_exists=no
+ echo "rm -f config.cache config.log multilib.out" > skip-this-dir
+ fi
+ fi
+fi
+
+fi
+
+echo "$ac_t""$g77_cv_compiler_exists" 1>&6
+if test x$g77_cv_compiler_exists = xno
+then
+ rm -f Makefile conftest* confdefs* core
+ exit 0
+fi
+
+
+
+
+# We need AC_EXEEXT to keep automake happy in cygnus mode. However,
+# at least currently, we never actually build a program, so we never
+# need to use $(EXEEXT). Moreover, the test for EXEEXT normally
+# fails, because we are probably configuring with a cross compiler
+# which cant create executables. So we include AC_EXEEXT to keep
+# automake happy, but we dont execute it, since we dont care about
+# the result.
+if false; then
+ # autoconf 2.50 runs AC_EXEEXT by default, and the macro expands
+ # to nothing, so nothing would remain between `then' and `fi' if it
+ # were not for the `:' below.
+ :
+ echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
+echo "configure:627: checking for Cygwin environment" >&5
+if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 632 "configure"
+#include "confdefs.h"
+
+int main() {
+
+#ifndef __CYGWIN__
+#define __CYGWIN__ __CYGWIN32__
+#endif
+return __CYGWIN__;
+; return 0; }
+EOF
+if { (eval echo configure:643: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_cygwin=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_cygwin=no
+fi
+rm -f conftest*
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_cygwin" 1>&6
+CYGWIN=
+test "$ac_cv_cygwin" = yes && CYGWIN=yes
+echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
+echo "configure:660: checking for mingw32 environment" >&5
+if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 665 "configure"
+#include "confdefs.h"
+
+int main() {
+return __MINGW32__;
+; return 0; }
+EOF
+if { (eval echo configure:672: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_mingw32=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_mingw32=no
+fi
+rm -f conftest*
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_mingw32" 1>&6
+MINGW32=
+test "$ac_cv_mingw32" = yes && MINGW32=yes
+
+
+echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
+echo "configure:691: checking for executable suffix" >&5
+if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
+ ac_cv_exeext=.exe
+else
+ rm -f conftest*
+ echo 'int main () { return 0; }' > conftest.$ac_ext
+ ac_cv_exeext=
+ if { (eval echo configure:701: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+ for file in conftest.*; do
+ case $file in
+ *.c | *.o | *.obj | *.ilk | *.pdb) ;;
+ *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
+ esac
+ done
+ else
+ { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
+ fi
+ rm -f conftest*
+ test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
+fi
+fi
+
+EXEEXT=""
+test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
+echo "$ac_t""${ac_cv_exeext}" 1>&6
+ac_exeext=$EXEEXT
+
+fi
+
+# For g77 we'll set CC to point at the built gcc, but this will get it into
+# the makefiles
+
+# Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:729: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CC="gcc"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:759: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_prog_rejected=no
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
+ ac_prog_rejected=yes
+ continue
+ fi
+ ac_cv_prog_CC="cc"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+if test $ac_prog_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $ac_cv_prog_CC
+ shift
+ if test $# -gt 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+ set dummy "$ac_dir/$ac_word" "$@"
+ shift
+ ac_cv_prog_CC="$@"
+ fi
+fi
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ if test -z "$CC"; then
+ case "`uname -s`" in
+ *win32* | *WIN32*)
+ # Extract the first word of "cl", so it can be a program name with args.
+set dummy cl; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:810: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CC="cl"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+ ;;
+ esac
+ fi
+ test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
+fi
+
+
+echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
+echo "configure:843: checking whether we are using GNU C" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- f77_cv_compiler_exists=yes
- if test -n "$r"; then
- if test -d "$r"/gcc; then
- if test -f "$r"/gcc/$compiler_name; then
- true
- else
- f77_cv_compiler_exists=no
- echo "rm -f config.cache config.log multilib.out" > skip-this-dir
- fi
- fi
- fi
-
+ cat > conftest.c <<EOF
+#ifdef __GNUC__
+ yes;
+#endif
+EOF
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:852: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+ ac_cv_prog_gcc=yes
+else
+ ac_cv_prog_gcc=no
+fi
+fi
+
+echo "$ac_t""$ac_cv_prog_gcc" 1>&6
+
+if test $ac_cv_prog_gcc = yes; then
+ GCC=yes
+else
+ GCC=
+fi
+
+ac_test_CFLAGS="${CFLAGS+set}"
+ac_save_CFLAGS="$CFLAGS"
+CFLAGS=
+echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+echo "configure:871: checking whether ${CC-cc} accepts -g" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ echo 'void f(){}' > conftest.c
+if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
+ ac_cv_prog_cc_g=yes
+else
+ ac_cv_prog_cc_g=no
+fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
+if test "$ac_test_CFLAGS" = set; then
+ CFLAGS="$ac_save_CFLAGS"
+elif test $ac_cv_prog_cc_g = yes; then
+ if test "$GCC" = yes; then
+ CFLAGS="-g -O2"
+ else
+ CFLAGS="-g"
+ fi
+else
+ if test "$GCC" = yes; then
+ CFLAGS="-O2"
+ else
+ CFLAGS=
+ fi
+fi
+
+# Check whether --enable-shared or --disable-shared was given.
+if test "${enable_shared+set}" = set; then
+ enableval="$enable_shared"
+ p=${PACKAGE-default}
+case $enableval in
+yes) enable_shared=yes ;;
+no) enable_shared=no ;;
+*)
+ enable_shared=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_shared=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+else
+ enable_shared=yes
+fi
+
+# Check whether --enable-static or --disable-static was given.
+if test "${enable_static+set}" = set; then
+ enableval="$enable_static"
+ p=${PACKAGE-default}
+case $enableval in
+yes) enable_static=yes ;;
+no) enable_static=no ;;
+*)
+ enable_static=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_static=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+else
+ enable_static=yes
+fi
+
+# Check whether --enable-fast-install or --disable-fast-install was given.
+if test "${enable_fast_install+set}" = set; then
+ enableval="$enable_fast_install"
+ p=${PACKAGE-default}
+case $enableval in
+yes) enable_fast_install=yes ;;
+no) enable_fast_install=no ;;
+*)
+ enable_fast_install=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_fast_install=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+else
+ enable_fast_install=yes
+fi
+
+
+# Make sure we can run config.sub.
+if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
+else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking host system type""... $ac_c" 1>&6
+echo "configure:978: checking host system type" >&5
+
+host_alias=$host
+case "$host_alias" in
+NONE)
+ case $nonopt in
+ NONE)
+ if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
+ else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
+ fi ;;
+ *) host_alias=$nonopt ;;
+ esac ;;
+esac
+
+host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$host" 1>&6
+
+echo $ac_n "checking build system type""... $ac_c" 1>&6
+echo "configure:999: checking build system type" >&5
+
+build_alias=$build
+case "$build_alias" in
+NONE)
+ case $nonopt in
+ NONE) build_alias=$host_alias ;;
+ *) build_alias=$nonopt ;;
+ esac ;;
+esac
+
+build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
+build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$build" 1>&6
+
+# Check whether --with-gnu-ld or --without-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then
+ withval="$with_gnu_ld"
+ test "$withval" = no || with_gnu_ld=yes
+else
+ with_gnu_ld=no
+fi
+
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
+echo "configure:1028: checking for ld used by GCC" >&5
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [\\/]* | [A-Za-z]:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
+ # Canonicalize the path of ld
+ ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
+echo "configure:1058: checking for GNU ld" >&5
+else
+ echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
+echo "configure:1061: checking for non-GNU ld" >&5
+fi
+if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -z "$LD"; then
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ lt_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some GNU ld's only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+ test "$with_gnu_ld" != no && break
+ else
+ test "$with_gnu_ld" != yes && break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+else
+ lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+ echo "$ac_t""$LD" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
+echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
+echo "configure:1096: checking if the linker ($LD) is GNU ld" >&5
+if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ # I'd rather use --version here, but apparently some GNU ld's only accept -v.
+if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+ lt_cv_prog_gnu_ld=yes
+else
+ lt_cv_prog_gnu_ld=no
+fi
+fi
+
+echo "$ac_t""$lt_cv_prog_gnu_ld" 1>&6
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
+echo "configure:1113: checking for $LD option to reload object files" >&5
+if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ lt_cv_ld_reload_flag='-r'
+fi
+
+echo "$ac_t""$lt_cv_ld_reload_flag" 1>&6
+reload_flag=$lt_cv_ld_reload_flag
+test -n "$reload_flag" && reload_flag=" $reload_flag"
+
+echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
+echo "configure:1125: checking for BSD-compatible nm" >&5
+if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$NM"; then
+ # Let the user override the test.
+ lt_cv_path_NM="$NM"
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
+ test -z "$ac_dir" && ac_dir=.
+ tmp_nm=$ac_dir/${ac_tool_prefix}nm
+ if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
+ # Check to see if the nm accepts a BSD-compat flag.
+ # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+ # nm: unknown option "B" ignored
+ # Tru64's nm complains that /dev/null is an invalid object file
+ if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
+ lt_cv_path_NM="$tmp_nm -B"
+ break
+ elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+ lt_cv_path_NM="$tmp_nm -p"
+ break
+ else
+ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+ continue # so that we can try to find one that supports BSD flags
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
+fi
+fi
+
+NM="$lt_cv_path_NM"
+echo "$ac_t""$NM" 1>&6
+
+echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
+echo "configure:1163: checking whether ln -s works" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ rm -f conftestdata
+if ln -s X conftestdata 2>/dev/null
+then
+ rm -f conftestdata
+ ac_cv_prog_LN_S="ln -s"
+else
+ ac_cv_prog_LN_S=ln
+fi
+fi
+LN_S="$ac_cv_prog_LN_S"
+if test "$ac_cv_prog_LN_S" = "ln -s"; then
+ echo "$ac_t""yes" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
+echo "configure:1184: checking how to recognise dependant libraries" >&5
+if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [regex]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given egrep regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+beos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+bsdi4*)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ ;;
+
+cygwin* | mingw* |pw32*)
+ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ ;;
+
+darwin* | rhapsody*)
+ lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ case "$host_os" in
+ rhapsody* | darwin1.012)
+ lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System'
+ ;;
+ *) # Darwin 1.3 on
+ lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
+ ;;
+ esac
+ ;;
+
+freebsd* )
+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+ case $host_cpu in
+ i*86 )
+ # Not sure whether the presence of OpenBSD here was a mistake.
+ # Let's accept both of them until this is cleared up.
+ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+ ;;
+ esac
+ else
+ lt_cv_deplibs_check_method=pass_all
+ fi
+ ;;
+
+gnu*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+hpux10.20*|hpux11*)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ ;;
+
+irix5* | irix6*)
+ case $host_os in
+ irix5*)
+ # this will be overridden with pass_all, but let us keep it just in case
+ lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
+ ;;
+ *)
+ case $LD in
+ *-32|*"-32 ") libmagic=32-bit;;
+ *-n32|*"-n32 ") libmagic=N32;;
+ *-64|*"-64 ") libmagic=64-bit;;
+ *) libmagic=never-match;;
+ esac
+ # this will be overridden with pass_all, but let us keep it just in case
+ lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
+ ;;
+ esac
+ lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+# This must be Linux ELF.
+linux-gnu*)
+ case $host_cpu in
+ alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
+ lt_cv_deplibs_check_method=pass_all ;;
+ *)
+ # glibc up to 2.1.1 does not perform some relocations on ARM
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
+ esac
+ lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
+ ;;
+
+netbsd*)
+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+ lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$'
+ fi
+ ;;
+
+newsos6)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libnls.so
+ ;;
+
+osf3* | osf4* | osf5*)
+ # this will be overridden with pass_all, but let us keep it just in case
+ lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sco3.2v5*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+solaris*)
+ lt_cv_deplibs_check_method=pass_all
+ lt_cv_file_magic_test_file=/lib/libc.so
+ ;;
+
+sysv5uw[78]* | sysv4*uw2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ case $host_vendor in
+ ncr)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ motorola)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+ ;;
+ esac
+ ;;
+esac
+
+fi
+
+echo "$ac_t""$lt_cv_deplibs_check_method" 1>&6
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+
+echo $ac_n "checking for object suffix""... $ac_c" 1>&6
+echo "configure:1348: checking for object suffix" >&5
+if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ rm -f conftest*
+echo 'int i = 1;' > conftest.$ac_ext
+if { (eval echo configure:1354: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ for ac_file in conftest.*; do
+ case $ac_file in
+ *.c) ;;
+ *) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;;
+ esac
+ done
+else
+ { echo "configure: error: installation or configuration problem; compiler does not work" 1>&2; exit 1; }
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_objext" 1>&6
+OBJEXT=$ac_cv_objext
+ac_objext=$ac_cv_objext
+
+if test $host != $build; then
+ ac_tool_prefix=${host_alias}-
+else
+ ac_tool_prefix=
+fi
+
+# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
+
+# Only perform the check for file, if the check method requires it
+case $deplibs_check_method in
+file_magic*)
+ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+ echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
+echo "configure:1384: checking for ${ac_tool_prefix}file" >&5
+if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case $MAGIC_CMD in
+ /*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
+ ;;
+ *)
+ ac_save_MAGIC_CMD="$MAGIC_CMD"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="/usr/bin:$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/${ac_tool_prefix}file; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ egrep "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ MAGIC_CMD="$ac_save_MAGIC_CMD"
+ ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ echo "$ac_t""$MAGIC_CMD" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+ if test -n "$ac_tool_prefix"; then
+ echo $ac_n "checking for file""... $ac_c" 1>&6
+echo "configure:1446: checking for file" >&5
+if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case $MAGIC_CMD in
+ /*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
+ ;;
+ *)
+ ac_save_MAGIC_CMD="$MAGIC_CMD"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="/usr/bin:$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/file; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/file"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ egrep "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ MAGIC_CMD="$ac_save_MAGIC_CMD"
+ ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ echo "$ac_t""$MAGIC_CMD" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ else
+ MAGIC_CMD=:
+ fi
+fi
+
+ fi
+ ;;
+esac
+
+# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1517: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+ echo "$ac_t""$RANLIB" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+if test -z "$ac_cv_prog_RANLIB"; then
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1549: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_RANLIB="ranlib"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+ echo "$ac_t""$RANLIB" 1>&6
+else
+ echo "$ac_t""no" 1>&6
fi
-echo "$ac_t""$f77_cv_compiler_exists" 1>&6
-if test x$f77_cv_compiler_exists = xno
-then
- rm -f Makefile conftest* confdefs* core
- exit 0
+else
+ RANLIB=":"
+fi
fi
-# For g77 we'll set CC to point at the built gcc, but this will get it into
-# the makefiles
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
+# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:588: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+echo "configure:1584: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CC="gcc"
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
- echo "$ac_t""$CC" 1>&6
+STRIP="$ac_cv_prog_STRIP"
+if test -n "$STRIP"; then
+ echo "$ac_t""$STRIP" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-if test -z "$CC"; then
- # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
+
+if test -z "$ac_cv_prog_STRIP"; then
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:617: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+echo "configure:1616: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- ac_prog_rejected=no
- for ac_dir in $PATH; do
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
- ac_prog_rejected=yes
- continue
- fi
- ac_cv_prog_CC="cc"
+ ac_cv_prog_STRIP="strip"
break
fi
done
IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
- # We found a bogon in the path, so make sure we never use it.
- set dummy $ac_cv_prog_CC
- shift
- if test $# -gt 0; then
- # We chose a different compiler from the bogus one.
- # However, it has the same basename, so the bogon will be chosen
- # first if we set CC to just the basename; use the full file name.
- shift
- set dummy "$ac_dir/$ac_word" "$@"
- shift
- ac_cv_prog_CC="$@"
- fi
+ test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP=":"
fi
fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
- echo "$ac_t""$CC" 1>&6
+STRIP="$ac_cv_prog_STRIP"
+if test -n "$STRIP"; then
+ echo "$ac_t""$STRIP" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
+else
+ STRIP=":"
+fi
fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:665: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
-ac_ext=c
+# Check for any special flags to pass to ltconfig.
+libtool_flags="--cache-file=$cache_file"
+test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
+test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
+test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
+test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
+test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+
+
+# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then
+ enableval="$enable_libtool_lock"
+ :
+fi
+
+test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
+
+# Check whether --with-pic or --without-pic was given.
+if test "${with_pic+set}" = set; then
+ withval="$with_pic"
+ pic_mode="$withval"
+else
+ pic_mode=default
+fi
+
+test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
+test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+*-*-irix6*)
+ # Find out which ABI we are using.
+ echo '#line 1683 "configure"' > conftest.$ac_ext
+ if { (eval echo configure:1684: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -32"
+ ;;
+ *N32*)
+ LD="${LD-ld} -n32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -64"
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
+*-*-sco3.2v5*)
+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ SAVE_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -belf"
+ echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
+echo "configure:1705: checking whether the C compiler needs -belf" >&5
+if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+ ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross
-cat > conftest.$ac_ext <<EOF
-#line 675 "configure"
+ cat > conftest.$ac_ext <<EOF
+#line 1718 "configure"
#include "confdefs.h"
-main(){return(0);}
+
+int main() {
+
+; return 0; }
EOF
-if { (eval echo configure:679: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
- ac_cv_prog_cc_works=yes
- # If we can't run a trivial program, we are probably using a cross compiler.
- if (./conftest; exit) 2>/dev/null; then
- ac_cv_prog_cc_cross=no
- else
- ac_cv_prog_cc_cross=yes
- fi
+if { (eval echo configure:1725: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ lt_cv_cc_needs_belf=yes
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
- ac_cv_prog_cc_works=no
+ rm -rf conftest*
+ lt_cv_cc_needs_belf=no
fi
-rm -fr conftest*
+rm -f conftest*
+ ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
-echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
-if test $ac_cv_prog_cc_works = no; then
- { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:699: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
-echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
-cross_compiling=$ac_cv_prog_cc_cross
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:704: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.c <<EOF
-#ifdef __GNUC__
- yes;
-#endif
+echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+ CFLAGS="$SAVE_CFLAGS"
+ fi
+ ;;
+
+
+esac
+
+
+# Save cache, so that ltconfig can load it
+cat > confcache <<\EOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs. It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
+#
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already. You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
+#
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:713: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
- ac_cv_prog_gcc=yes
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(set) 2>&1 |
+ case `(ac_space=' '; set | grep ac_space) 2>&1` in
+ *ac_space=\ *)
+ # `set' does not quote correctly, so add quotes (double-quote substitution
+ # turns \\\\ into \\, and sed turns \\ into \).
+ sed -n \
+ -e "s/'/'\\\\''/g" \
+ -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+ ;;
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+ ;;
+ esac >> confcache
+if cmp -s $cache_file confcache; then
+ :
else
- ac_cv_prog_gcc=no
-fi
+ if test -w $cache_file; then
+ echo "updating cache $cache_file"
+ cat confcache > $cache_file
+ else
+ echo "not updating unwritable cache $cache_file"
+ fi
fi
+rm -f confcache
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
-if test $ac_cv_prog_gcc = yes; then
- GCC=yes
- ac_test_CFLAGS="${CFLAGS+set}"
- ac_save_CFLAGS="$CFLAGS"
- CFLAGS=
- echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:728: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
- ac_cv_prog_cc_g=yes
+# Actually configure libtool. ac_aux_dir is where install-sh is found.
+AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
+MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
+AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
+objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
+deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
+${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
+$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
+|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
+
+# Reload cache, that may have been modified by ltconfig
+if test -r "$cache_file"; then
+ echo "loading cache $cache_file"
+ . $cache_file
else
- ac_cv_prog_cc_g=no
+ echo "creating cache $cache_file"
+ > $cache_file
fi
-rm -f conftest*
-fi
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
- if test "$ac_test_CFLAGS" = set; then
- CFLAGS="$ac_save_CFLAGS"
- elif test $ac_cv_prog_cc_g = yes; then
- CFLAGS="-g -O2"
- else
- CFLAGS="-O2"
- fi
-else
- GCC=
- test "${CFLAGS+set}" = set || CFLAGS="-g"
-fi
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+# Redirect the config.log output again, so that the ltconfig log is not
+# clobbered by the next message.
+exec 5>>./config.log
+
+
+
+
+
+
test "$AR" || AR=ar
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:764: checking for $ac_word" >&5
+echo "configure:1849: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$RANLIB"; then
ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_RANLIB="ranlib"
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:803: checking for a BSD compatible install" >&5
+echo "configure:1889: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":"
for ac_dir in $PATH; do
# Account for people who put trailing slashes in PATH elements.
case "$ac_dir/" in
# It thinks the first close brace ends the variable substitution.
test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
+
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:854: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:1942: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
# Sanity check for the cross-compilation case:
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:883: checking how to run the C preprocessor" >&5
+echo "configure:1971: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 898 "configure"
+#line 1986 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:904: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
+{ (eval echo configure:1992: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
else
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 915 "configure"
+#line 2003 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:2009: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CPP="${CC-cc} -nologo -E"
+ cat > conftest.$ac_ext <<EOF
+#line 2020 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:921: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
+{ (eval echo configure:2026: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
else
rm -f conftest*
fi
rm -f conftest*
+fi
+rm -f conftest*
ac_cv_prog_CPP="$CPP"
fi
CPP="$ac_cv_prog_CPP"
ac_safe=`echo "stdio.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for stdio.h""... $ac_c" 1>&6
-echo "configure:945: checking for stdio.h" >&5
+echo "configure:2052: checking for stdio.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 950 "configure"
+#line 2057 "configure"
#include "confdefs.h"
#include <stdio.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:955: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
+{ (eval echo configure:2062: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
eval "ac_cv_header_$ac_safe=yes"
fi
-# We have to firkle with the info in hconfig.h to figure out suitable types
-# (via com.h). proj.h and com.h are in gcc/f/, config.h which they need
-# is in gcc/ and the config files are in gcc/config/.
-echo $ac_n "checking f2c integer type""... $ac_c" 1>&6
-echo "configure:986: checking f2c integer type" >&5
-late_ac_cpp=$ac_cpp
-ac_cpp="$late_ac_cpp -I../../gcc/f -I../../gcc -I../../gcc/config"
-if test "$srcdir" != . ; then
- ac_cpp="$ac_cpp -I$srcdir/../gcc/f -I$srcdir/../gcc -I$srcdir/../gcc/config"
-fi
-if eval "test \"`echo '$''{'g77_cv_sys_f2cinteger'+set}'`\" = set"; then
+echo $ac_n "checking for built-in g77 integer types""... $ac_c" 1>&6
+echo "configure:2090: checking for built-in g77 integer types" >&5
+if eval "test \"`echo '$''{'libf2c_cv_has_g77_builtin_types'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- echo "configure:995: using $ac_cpp" >&5
-cat > conftest.$ac_ext <<EOF
-#line 997 "configure"
-#include "confdefs.h"
-#include "proj.h"
-#define FFECOM_DETERMINE_TYPES 1
-#include "com.h"
-#if FFECOM_f2cINTEGER == FFECOM_f2ccodeLONG
-F2C_INTEGER=long int
-#elif FFECOM_f2cINTEGER == FFECOM_f2ccodeINT
-F2C_INTEGER=int
-#else
-# error "Cannot find a suitable type for F2C_INTEGER"
-#endif
-
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "F2C_INTEGER=long int" >/dev/null 2>&1; then
- rm -rf conftest*
- g77_cv_sys_f2cinteger="long int"
-fi
-rm -f conftest*
-
-if test "$g77_cv_sys_f2cinteger" = ""; then
-echo "configure:1019: using $ac_cpp" >&5
cat > conftest.$ac_ext <<EOF
-#line 1021 "configure"
+#line 2095 "configure"
#include "confdefs.h"
-#include "proj.h"
-#define FFECOM_DETERMINE_TYPES 1
-#include "com.h"
-#if FFECOM_f2cINTEGER == FFECOM_f2ccodeLONG
-F2C_INTEGER=long int
-#elif FFECOM_f2cINTEGER == FFECOM_f2ccodeINT
-F2C_INTEGER=int
-#else
-# error "Cannot find a suitable type for F2C_INTEGER"
-#endif
+int main() {
+__g77_integer g77i;
+__g77_uinteger g77ui;
+__g77_longint g77l;
+__g77_ulongint g77ul;
+; return 0; }
EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "F2C_INTEGER=int" >/dev/null 2>&1; then
+if { (eval echo configure:2105: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
- g77_cv_sys_f2cinteger=int
-fi
-rm -f conftest*
-
-fi
-if test "$g77_cv_sys_f2cinteger" = ""; then
- echo "$ac_t""""" 1>&6
- { echo "configure: error: Can't determine type for f2c integer; config.log may help." 1>&2; exit 1; }
-fi
-
-fi
-
-echo "$ac_t""$g77_cv_sys_f2cinteger" 1>&6
-F2C_INTEGER=$g77_cv_sys_f2cinteger
-ac_cpp=$late_ac_cpp
-
-
-echo $ac_n "checking f2c long int type""... $ac_c" 1>&6
-echo "configure:1056: checking f2c long int type" >&5
-late_ac_cpp=$ac_cpp
-ac_cpp="$late_ac_cpp -I../../gcc/f -I../../gcc -I../../gcc/config"
-if test "$srcdir" != . ; then
- ac_cpp="$ac_cpp -I$srcdir/../gcc/f -I$srcdir/../gcc -I$srcdir/../gcc/config"
-fi
-if eval "test \"`echo '$''{'g77_cv_sys_f2clongint'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+ libf2c_cv_has_g77_builtin_types=yes
else
- echo "configure:1065: using $ac_cpp" >&5
-cat > conftest.$ac_ext <<EOF
-#line 1067 "configure"
-#include "confdefs.h"
-#include "proj.h"
-#define FFECOM_DETERMINE_TYPES 1
-#include "com.h"
-#if FFECOM_f2cLONGINT == FFECOM_f2ccodeLONG
-F2C_LONGINT=long int
-#elif FFECOM_f2cLONGINT == FFECOM_f2ccodeLONGLONG
-F2C_LONGINT=long long int
-#else
-# error "Cannot find a suitable type for F2C_LONGINT"
-#endif
-
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "F2C_LONGINT=long int" >/dev/null 2>&1; then
- rm -rf conftest*
- g77_cv_sys_f2clongint="long int"
-fi
-rm -f conftest*
-
-if test "$g77_cv_sys_f2clongint" = ""; then
-echo "configure:1089: using $ac_cpp" >&5
- cat > conftest.$ac_ext <<EOF
-#line 1091 "configure"
-#include "confdefs.h"
-#include "proj.h"
-#define FFECOM_DETERMINE_TYPES 1
-#include "com.h"
-#if FFECOM_f2cLONGINT == FFECOM_f2ccodeLONG
-F2C_LONGINT=long int
-#elif FFECOM_f2cLONGINT == FFECOM_f2ccodeLONGLONG
-F2C_LONGINT=long long int
-#else
-# error "Cannot find a suitable type for F2C_LONGINT"
-#endif
-
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "F2C_LONGINT=long long int" >/dev/null 2>&1; then
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
rm -rf conftest*
- g77_cv_sys_f2clongint="long long int"
+ libf2c_cv_has_g77_builtin_types=no
fi
rm -f conftest*
-
-fi
-if test "$g77_cv_sys_f2clongint" = ""; then
- echo "$ac_t""""" 1>&6
- { echo "configure: error: Can't determine type for f2c long int; config.log may help." 1>&2; exit 1; }
fi
+echo "$ac_t""$libf2c_cv_has_g77_builtin_types" 1>&6
+if test $libf2c_cv_has_g77_builtin_types = no; then
+ { echo "configure: error: gcc doesn't define all of the built in types __g77_integer,
+__g77_uinteger, __g77_longint, and __g77_ulongint. You may not be using
+a new enough version of gcc, or your target may not have type sizes which
+accommodate those types." 1>&2; exit 1; }
fi
-echo "$ac_t""$g77_cv_sys_f2clongint" 1>&6
-F2C_LONGINT=$g77_cv_sys_f2clongint
-ac_cpp=$late_ac_cpp
-
-
# avoid confusion in case the `makefile's from the f2c distribution have
# got put here
test -f libF77/makefile && mv libF77/makefile libF77/makefile.ori
# Get the version trigger filename from the toplevel
if [ "${with_gcc_version_trigger+set}" = set ]; then
gcc_version_trigger=$with_gcc_version_trigger
- gcc_version=`sed -e 's/.*\"\([^ \"]*\)[ \"].*/\1/' < ${gcc_version_trigger}`
+ gcc_version=`grep version_string ${gcc_version_trigger} | sed -e 's/.*\"\([^ \"]*\)[ \"].*/\1/'`
else
gcc_version_trigger=
gcc_version=UNKNOWN
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:1170: checking host system type" >&5
+echo "configure:2170: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:1191: checking target system type" >&5
+echo "configure:2191: checking target system type" >&5
target_alias=$target
case "$target_alias" in
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:1209: checking build system type" >&5
+echo "configure:2209: checking build system type" >&5
build_alias=$build
case "$build_alias" in
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
- case `(ac_space=' '; set) 2>&1 | grep ac_space` in
+ case `(ac_space=' '; set | grep ac_space) 2>&1` in
*ac_space=\ *)
# `set' does not quote correctly, so add quotes (double-quote substitution
# turns \\\\ into \\, and sed turns \\ into \).
echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-version | --version | --versio | --versi | --vers | --ver | --ve | --v)
- echo "$CONFIG_STATUS generated by autoconf version 2.12.1"
+ echo "$CONFIG_STATUS generated by autoconf version 2.13"
exit 0 ;;
-help | --help | --hel | --he | --h)
echo "\$ac_cs_usage"; exit 0 ;;
s%@CFLAGS@%$CFLAGS%g
s%@CPPFLAGS@%$CPPFLAGS%g
s%@CXXFLAGS@%$CXXFLAGS%g
+s%@FFLAGS@%$FFLAGS%g
s%@DEFS@%$DEFS%g
s%@LDFLAGS@%$LDFLAGS%g
s%@LIBS@%$LIBS%g
s%@oldincludedir@%$oldincludedir%g
s%@infodir@%$infodir%g
s%@mandir@%$mandir%g
+s%@EXEEXT@%$EXEEXT%g
s%@CC@%$CC%g
-s%@AR@%$AR%g
+s%@host@%$host%g
+s%@host_alias@%$host_alias%g
+s%@host_cpu@%$host_cpu%g
+s%@host_vendor@%$host_vendor%g
+s%@host_os@%$host_os%g
+s%@build@%$build%g
+s%@build_alias@%$build_alias%g
+s%@build_cpu@%$build_cpu%g
+s%@build_vendor@%$build_vendor%g
+s%@build_os@%$build_os%g
+s%@LN_S@%$LN_S%g
+s%@OBJEXT@%$OBJEXT%g
s%@RANLIB@%$RANLIB%g
+s%@STRIP@%$STRIP%g
+s%@LIBTOOL@%$LIBTOOL%g
+s%@AR@%$AR%g
s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
+s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
s%@INSTALL_DATA@%$INSTALL_DATA%g
s%@SET_MAKE@%$SET_MAKE%g
s%@CPP@%$CPP%g
-s%@F2C_INTEGER@%$F2C_INTEGER%g
-s%@F2C_LONGINT@%$F2C_LONGINT%g
s%@gcc_version@%$gcc_version%g
s%@gcc_version_trigger@%$gcc_version_trigger%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
s%@target@%$target%g
s%@target_alias@%$target_alias%g
s%@target_cpu@%$target_cpu%g
s%@target_vendor@%$target_vendor%g
s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
s%@subdirs@%$subdirs%g
CEOF
OSDN Git Service
