ac_default_prefix=/usr/local
# Any additions from configure.in:
ac_help="$ac_help
+ --enable-multilib build hella library versions (default)"
+ac_help="$ac_help
+ --with-target-subdir=SUBDIR
+ configuring in a subdirectory"
+ac_help="$ac_help
+ --with-cross-host=HOST configuring with a cross compiler"
+ac_help="$ac_help
+ --enable-version-specific-runtime-libs Specify that runtime libraries should be installed in a compiler-specific directory "
+ac_help="$ac_help
--enable-shared[=PKGS] build shared libraries [default=yes]"
ac_help="$ac_help
--enable-static[=PKGS] build static libraries [default=yes]"
program_transform_name=s,x,x,
silent=
site=
-sitefile=
srcdir=
target=NONE
verbose=
--help print this message
--no-create do not create output files
--quiet, --silent do not print \`checking...' messages
- --site-file=FILE use FILE as the site file
--version print the version of autoconf that created configure
Directory and file names:
--prefix=PREFIX install architecture-independent files in PREFIX
-site=* | --site=* | --sit=*)
site="$ac_optarg" ;;
- -site-file | --site-file | --site-fil | --site-fi | --site-f)
- ac_prev=sitefile ;;
- -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
- sitefile="$ac_optarg" ;;
-
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
- if test -z "$CONFIG_SITE"; then
- if test "x$prefix" != xNONE; then
- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
- else
- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
- fi
+if test -z "$CONFIG_SITE"; then
+ if test "x$prefix" != xNONE; then
+ CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+ else
+ CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
fi
-else
- CONFIG_SITE="$sitefile"
fi
for ac_site_file in $CONFIG_SITE; do
if test -r "$ac_site_file"; then
-if test "${srcdir}" = "." ; then
- if test "${with_target_subdir}" != "." ; then
- topsrcdir=${with_multisrctop}../..
+# This works around the fact that libtool configuration may change LD
+# for this particular configuration, but some shells, instead of
+# keeping the changes in LD private, export them just because LD is
+# exported.
+ORIGINAL_LD_FOR_MULTILIBS=$LD
+
+
+ # Check whether --enable-multilib or --disable-multilib was given.
+if test "${enable_multilib+set}" = set; then
+ enableval="$enable_multilib"
+ case "${enableval}" in
+ yes) multilib=yes ;;
+ no) multilib=no ;;
+ *) { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
+ esac
+else
+ multilib=yes
+fi
+
+# When building with srcdir == objdir, links to the source files will
+# be created in directories within the target_subdir. We have to
+# adjust toplevel_srcdir accordingly, so that configure finds
+# install-sh and other auxiliary files that live in the top-level
+# source directory.
+if test "${srcdir}" = "."; then
+ if test -z "${with_target_subdir}"; then
+ toprel=".."
else
- topsrcdir=${with_multisrctop}..
+ if test "${with_target_subdir}" != "."; then
+ toprel="${with_multisrctop}../.."
+ else
+ toprel="${with_multisrctop}.."
+ fi
fi
else
- topsrcdir=${srcdir}/..
+ toprel=".."
fi
ac_aux_dir=
-for ac_dir in $topsrcdir $srcdir/$topsrcdir; do
+for ac_dir in ${srcdir}/$toprel $srcdir/${srcdir}/$toprel; do
if test -f $ac_dir/install-sh; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install-sh -c"
fi
done
if test -z "$ac_aux_dir"; then
- { echo "configure: error: can not find install-sh or install.sh in $topsrcdir $srcdir/$topsrcdir" 1>&2; exit 1; }
+ { echo "configure: error: can not find install-sh or install.sh in ${srcdir}/$toprel $srcdir/${srcdir}/$toprel" 1>&2; exit 1; }
fi
ac_config_guess=$ac_aux_dir/config.guess
ac_config_sub=$ac_aux_dir/config.sub
ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+toplevel_srcdir=\${top_srcdir}/$toprel
-# If the language specific compiler does not exist, but the "gcc" directory
-# does, we do not build anything. Note, $r is set by the top-level Makefile.
-# Note that when we look for the compiler, we search both with and without
-# extension to handle cross and canadian cross builds.
-compiler_name=f771
-rm -f skip-this-dir
-echo $ac_n "checking if compiler $compiler_name has been built""... $ac_c" 1>&6
-echo "configure:585: checking if compiler $compiler_name has been built" >&5
-if eval "test \"`echo '$''{'g77_cv_compiler_exists'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- g77_cv_compiler_exists=yes
-if test -n "$r"; then
- if test -d "$r"/gcc; then
- if test -f "$r"/gcc/$compiler_name \
- || test -f "$r"/gcc/$compiler_name.exe; then
- true
- else
- g77_cv_compiler_exists=no
- echo "rm -f config.cache config.log multilib.out" > skip-this-dir
- fi
- fi
-fi
-fi
-echo "$ac_t""$g77_cv_compiler_exists" 1>&6
-if test x$g77_cv_compiler_exists = xno
-then
- rm -f Makefile conftest* confdefs* core
- exit 0
+
+# Do some error checking and defaulting for the host and target type.
+# The inputs are:
+# configure --host=HOST --target=TARGET --build=BUILD NONOPT
+#
+# The rules are:
+# 1. You are not allowed to specify --host, --target, and nonopt at the
+# same time.
+# 2. Host defaults to nonopt.
+# 3. If nonopt is not specified, then host defaults to the current host,
+# as determined by config.guess.
+# 4. Target and build default to nonopt.
+# 5. If nonopt is not specified, then target and build default to host.
+
+# The aliases save the names the user supplied, while $host etc.
+# will get canonicalized.
+case $host---$target---$nonopt in
+NONE---*---* | *---NONE---* | *---*---NONE) ;;
+*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
+esac
+
+
+# Make sure we can run config.sub.
+if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
+else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
fi
+echo $ac_n "checking host system type""... $ac_c" 1>&6
+echo "configure:635: checking host system type" >&5
+host_alias=$host
+case "$host_alias" in
+NONE)
+ case $nonopt in
+ NONE)
+ if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
+ else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
+ fi ;;
+ *) host_alias=$nonopt ;;
+ esac ;;
+esac
+host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$host" 1>&6
-# We need AC_EXEEXT to keep automake happy in cygnus mode. However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT). Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which cant create executables. So we include AC_EXEEXT to keep
-# automake happy, but we dont execute it, since we dont care about
-# the result.
-if false; then
- # autoconf 2.50 runs AC_EXEEXT by default, and the macro expands
- # to nothing, so nothing would remain between `then' and `fi' if it
- # were not for the `:' below.
- :
- echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:627: checking for Cygwin environment" >&5
+echo $ac_n "checking target system type""... $ac_c" 1>&6
+echo "configure:656: checking target system type" >&5
+
+target_alias=$target
+case "$target_alias" in
+NONE)
+ case $nonopt in
+ NONE) target_alias=$host_alias ;;
+ *) target_alias=$nonopt ;;
+ esac ;;
+esac
+
+target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
+target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$target" 1>&6
+
+echo $ac_n "checking build system type""... $ac_c" 1>&6
+echo "configure:674: checking build system type" >&5
+
+build_alias=$build
+case "$build_alias" in
+NONE)
+ case $nonopt in
+ NONE) build_alias=$host_alias ;;
+ *) build_alias=$nonopt ;;
+ esac ;;
+esac
+
+build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
+build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$build" 1>&6
+
+test "$host_alias" != "$target_alias" &&
+ test "$program_prefix$program_suffix$program_transform_name" = \
+ NONENONEs,x,x, &&
+ program_prefix=${target_alias}-
+
+target_alias=${target_alias-$target}
+
+
+if test $host != $build; then
+ ac_tool_prefix=${host_alias}-
+else
+ ac_tool_prefix=
+fi
+
+echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
+echo "configure:706: checking for Cygwin environment" >&5
if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 632 "configure"
+#line 711 "configure"
#include "confdefs.h"
int main() {
return __CYGWIN__;
; return 0; }
EOF
-if { (eval echo configure:643: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:722: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_cygwin=yes
else
CYGWIN=
test "$ac_cv_cygwin" = yes && CYGWIN=yes
echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:660: checking for mingw32 environment" >&5
+echo "configure:739: checking for mingw32 environment" >&5
if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 665 "configure"
+#line 744 "configure"
#include "confdefs.h"
int main() {
return __MINGW32__;
; return 0; }
EOF
-if { (eval echo configure:672: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:751: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_mingw32=yes
else
MINGW32=
test "$ac_cv_mingw32" = yes && MINGW32=yes
+# Export build and source directories.
+# These need to be absolute paths, yet at the same time need to
+# canonicalize only relative paths, because then amd will not unmount
+# drives. Thus the use of PWDCMD: set it to 'pawd' or 'amq -w' if using amd.
+glibcpp_builddir=`${PWDCMD-pwd}`
+case $srcdir in
+\\/$* | ?:\\/*) glibcpp_srcdir=${srcdir} ;;
+*) glibcpp_srcdir=`cd "$srcdir" && ${PWDCMD-pwd} || echo "$srcdir"` ;;
+esac
+
-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:691: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
+
+
+
+# Will set LN_S to either 'ln -s' or 'ln'. With autoconf 2.50+, can also
+# be 'cp -p' if linking isn't available.
+#ac_cv_prog_LN_S='cp -p'
+echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
+echo "configure:786: checking whether ln -s works" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
- ac_cv_exeext=.exe
+ rm -f conftestdata
+if ln -s X conftestdata 2>/dev/null
+then
+ rm -f conftestdata
+ ac_cv_prog_LN_S="ln -s"
else
- rm -f conftest*
- echo 'int main () { return 0; }' > conftest.$ac_ext
- ac_cv_exeext=
- if { (eval echo configure:701: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
- for file in conftest.*; do
- case $file in
- *.c | *.o | *.obj | *.ilk | *.pdb) ;;
- *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
- esac
- done
- else
- { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
- fi
- rm -f conftest*
- test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
+ ac_cv_prog_LN_S=ln
+fi
fi
+LN_S="$ac_cv_prog_LN_S"
+if test "$ac_cv_prog_LN_S" = "ln -s"; then
+ echo "$ac_t""yes" 1>&6
+else
+ echo "$ac_t""no" 1>&6
fi
-EXEEXT=""
-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
-echo "$ac_t""${ac_cv_exeext}" 1>&6
-ac_exeext=$EXEEXT
+# We use these options to decide which functions to include.
+# Check whether --with-target-subdir or --without-target-subdir was given.
+if test "${with_target_subdir+set}" = set; then
+ withval="$with_target_subdir"
+ :
+fi
+
+# Check whether --with-cross-host or --without-cross-host was given.
+if test "${with_cross_host+set}" = set; then
+ withval="$with_cross_host"
+ :
fi
-# For g77 we'll set CC to point at the built gcc, but this will get it into
-# the makefiles
+
+ # Never versions of autoconf add an underscore to these functions.
+ # Prevent future problems ...
+
+
+
+
+
+# AC_PROG_CC
+
+# FIXME: We temporarily define our own version of AC_PROG_CC. This is
+# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS. We
+# are probably using a cross compiler, which will not be able to fully
+# link an executable. This should really be fixed in autoconf
+# itself.
+
+
+
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:729: checking for $ac_word" >&5
+echo "configure:842: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:759: checking for $ac_word" >&5
+echo "configure:872: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- if test -z "$CC"; then
- case "`uname -s`" in
- *win32* | *WIN32*)
- # Extract the first word of "cl", so it can be a program name with args.
-set dummy cl; ac_word=$2
+ test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
+echo "configure:921: checking whether we are using GNU C" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.c <<EOF
+#ifdef __GNUC__
+ yes;
+#endif
+EOF
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:930: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+ ac_cv_prog_gcc=yes
+else
+ ac_cv_prog_gcc=no
+fi
+fi
+
+echo "$ac_t""$ac_cv_prog_gcc" 1>&6
+
+if test $ac_cv_prog_gcc = yes; then
+ GCC=yes
+ ac_test_CFLAGS="${CFLAGS+set}"
+ ac_save_CFLAGS="$CFLAGS"
+ CFLAGS=
+ echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+echo "configure:945: checking whether ${CC-cc} accepts -g" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ echo 'void f(){}' > conftest.c
+if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
+ ac_cv_prog_cc_g=yes
+else
+ ac_cv_prog_cc_g=no
+fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
+ if test "$ac_test_CFLAGS" = set; then
+ CFLAGS="$ac_save_CFLAGS"
+ elif test $ac_cv_prog_cc_g = yes; then
+ CFLAGS="-g -O2"
+ else
+ CFLAGS="-O2"
+ fi
+else
+ GCC=
+ test "${CFLAGS+set}" = set || CFLAGS="-g"
+fi
+
+
+ # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
+set dummy ${ac_tool_prefix}as; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:976: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$AS"; then
+ ac_cv_prog_AS="$AS" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_AS="${ac_tool_prefix}as"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
+fi
+fi
+AS="$ac_cv_prog_AS"
+if test -n "$AS"; then
+ echo "$ac_t""$AS" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+
+ # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:810: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+echo "configure:1008: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
+ if test -n "$AR"; then
+ ac_cv_prog_AR="$AR" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_dummy="$PATH"
for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CC="cl"
+ ac_cv_prog_AR="${ac_tool_prefix}ar"
break
fi
done
IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
fi
fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
- echo "$ac_t""$CC" 1>&6
+AR="$ac_cv_prog_AR"
+if test -n "$AR"; then
+ echo "$ac_t""$AR" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- ;;
+
+
+
+ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1040: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+ echo "$ac_t""$RANLIB" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+if test -z "$ac_cv_prog_RANLIB"; then
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1072: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_RANLIB="ranlib"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB="ranlib-not-found-in-path-error"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+ echo "$ac_t""$RANLIB" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+else
+ RANLIB="ranlib-not-found-in-path-error"
+fi
+fi
+
+ # Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# ./install, which can be erroneously created by make from ./install.sh.
+echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
+echo "configure:1116: checking for a BSD compatible install" >&5
+if test -z "$INSTALL"; then
+if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":"
+ for ac_dir in $PATH; do
+ # Account for people who put trailing slashes in PATH elements.
+ case "$ac_dir/" in
+ /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
+ if test -f $ac_dir/$ac_prog; then
+ if test $ac_prog = install &&
+ grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ :
+ else
+ ac_cv_path_install="$ac_dir/$ac_prog -c"
+ break 2
+ fi
+ fi
+ done
+ ;;
esac
+ done
+ IFS="$ac_save_IFS"
+
+fi
+ if test "${ac_cv_path_install+set}" = set; then
+ INSTALL="$ac_cv_path_install"
+ else
+ # As a last resort, use the slow shell script. We don't cache a
+ # path for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the path is relative.
+ INSTALL="$ac_install_sh"
fi
- test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
fi
+echo "$ac_t""$INSTALL" 1>&6
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:843: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+
+ # We need AC_EXEEXT to keep automake happy in cygnus mode. However,
+ # at least currently, we never actually build a program, so we never
+ # need to use $(EXEEXT). Moreover, the test for EXEEXT normally
+ # fails, because we are probably configuring with a cross compiler
+ # which can't create executables. So we include AC_EXEEXT to keep
+ # automake happy, but we don't execute it, since we don't care about
+ # the result.
+ if false; then
+ # autoconf 2.50 runs AC_EXEEXT by default, and the macro expands
+ # to nothing, so nothing would remain between `then' and `fi' if it
+ # were not for the `:' below.
+ :
+
+
+echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
+echo "configure:1184: checking for executable suffix" >&5
+if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- cat > conftest.c <<EOF
-#ifdef __GNUC__
- yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:852: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
- ac_cv_prog_gcc=yes
+ if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
+ ac_cv_exeext=.exe
else
- ac_cv_prog_gcc=no
+ rm -f conftest*
+ echo 'int main () { return 0; }' > conftest.$ac_ext
+ ac_cv_exeext=
+ if { (eval echo configure:1194: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+ for file in conftest.*; do
+ case $file in
+ *.c | *.o | *.obj) ;;
+ *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
+ esac
+ done
+ else
+ { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
+ fi
+ rm -f conftest*
+ test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
fi
fi
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
+EXEEXT=""
+test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
+echo "$ac_t""${ac_cv_exeext}" 1>&6
+ac_exeext=$EXEEXT
+
+ fi
-if test $ac_cv_prog_gcc = yes; then
- GCC=yes
-else
- GCC=
-fi
-ac_test_CFLAGS="${CFLAGS+set}"
-ac_save_CFLAGS="$CFLAGS"
-CFLAGS=
-echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:871: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
- ac_cv_prog_cc_g=yes
+# Assumes glibcpp_builddir, glibcpp_srcdir are alreay set up and
+# exported correctly in GLIBCPP_CONFIGURE.
+glibcpp_toolexecdir=no
+glibcpp_toolexeclibdir=no
+glibcpp_prefixdir=${prefix}
+
+echo $ac_n "checking for interface version number""... $ac_c" 1>&6
+echo "configure:1224: checking for interface version number" >&5
+libstdcxx_interface=$INTERFACE
+echo "$ac_t""$libstdcxx_interface" 1>&6
+
+# Process the option "--enable-version-specific-runtime-libs"
+echo $ac_n "checking for --enable-version-specific-runtime-libs""... $ac_c" 1>&6
+echo "configure:1230: checking for --enable-version-specific-runtime-libs" >&5
+# Check whether --enable-version-specific-runtime-libs or --disable-version-specific-runtime-libs was given.
+if test "${enable_version_specific_runtime_libs+set}" = set; then
+ enableval="$enable_version_specific_runtime_libs"
+ case "$enableval" in
+ yes) version_specific_libs=yes ;;
+ no) version_specific_libs=no ;;
+ *) { echo "configure: error: Unknown argument to enable/disable version-specific libs" 1>&2; exit 1; };;
+ esac
else
- ac_cv_prog_cc_g=no
+ version_specific_libs=no
fi
-rm -f conftest*
+# Option set, now we can test it.
+echo "$ac_t""$version_specific_libs" 1>&6
-fi
+gcc_version_trigger=${toplevel_srcdir}/gcc/version.c
+gcc_version_full=`grep version_string ${gcc_version_trigger} | sed -e 's/.*\"\([^ \"]*\)[ \"].*/\1/'`
+gcc_version=`echo ${gcc_version_full} | sed -e 's/\(^ *\) .*/\1/'`
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-if test "$ac_test_CFLAGS" = set; then
- CFLAGS="$ac_save_CFLAGS"
-elif test $ac_cv_prog_cc_g = yes; then
- if test "$GCC" = yes; then
- CFLAGS="-g -O2"
- else
- CFLAGS="-g"
+
+
+if test $version_specific_libs = yes; then
+ # Need the gcc compiler version to know where to install libraries
+ # and header files if --enable-version-specific-runtime-libs option
+ # is selected. FIXME: "toolexecdir" is a misnomer, there are no
+ # executables installed there.
+ glibcpp_toolexecdir='$(libdir)/gcc/$(target_alias)'
+ glibcpp_toolexeclibdir='$(toolexecdir)/'${gcc_version}'$(MULTISUBDIR)'
fi
-else
- if test "$GCC" = yes; then
- CFLAGS="-O2"
+
+# Calculate glibcpp_toolexecdir, glibcpp_toolexeclibdir
+# Install a library built with a cross compiler in tooldir, not libdir.
+if test x"$glibcpp_toolexecdir" = x"no"; then
+ if test -n "$with_cross_host" &&
+ test x"$with_cross_host" != x"no"; then
+ glibcpp_toolexecdir='$(exec_prefix)/$(target_alias)'
+ glibcpp_toolexeclibdir='$(toolexecdir)/lib'
else
- CFLAGS=
+ glibcpp_toolexecdir='$(libdir)/gcc/$(target_alias)'
+ glibcpp_toolexeclibdir='$(libdir)'
fi
+ multi_os_directory=`$CC -print-multi-os-directory`
+ case $multi_os_directory in
+ .) ;; # Avoid trailing /.
+ *) glibcpp_toolexeclibdir=$glibcpp_toolexeclibdir/$multi_os_directory ;;
+ esac
fi
+
+
+
+
+
+
# Check whether --enable-shared or --disable-shared was given.
if test "${enable_shared+set}" = set; then
enableval="$enable_shared"
enable_fast_install=yes
fi
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:978: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
- case $nonopt in
- NONE)
- if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
- else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
- fi ;;
- *) host_alias=$nonopt ;;
- esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:999: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
- case $nonopt in
- NONE) build_alias=$host_alias ;;
- *) build_alias=$nonopt ;;
- esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
# Check whether --with-gnu-ld or --without-gnu-ld was given.
if test "${with_gnu_ld+set}" = set; then
withval="$with_gnu_ld"
if test "$GCC" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1028: checking for ld used by GCC" >&5
+echo "configure:1365: checking for ld used by GCC" >&5
case $host in
*-*-mingw*)
# gcc leaves a trailing carriage return which upsets mingw
esac
elif test "$with_gnu_ld" = yes; then
echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1058: checking for GNU ld" >&5
+echo "configure:1395: checking for GNU ld" >&5
else
echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1061: checking for non-GNU ld" >&5
+echo "configure:1398: checking for non-GNU ld" >&5
fi
if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
fi
test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1096: checking if the linker ($LD) is GNU ld" >&5
+echo "configure:1433: checking if the linker ($LD) is GNU ld" >&5
if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
-echo "configure:1113: checking for $LD option to reload object files" >&5
+echo "configure:1450: checking for $LD option to reload object files" >&5
if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
test -n "$reload_flag" && reload_flag=" $reload_flag"
echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1125: checking for BSD-compatible nm" >&5
+echo "configure:1462: checking for BSD-compatible nm" >&5
if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
NM="$lt_cv_path_NM"
echo "$ac_t""$NM" 1>&6
-echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1163: checking whether ln -s works" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- rm -f conftestdata
-if ln -s X conftestdata 2>/dev/null
-then
- rm -f conftestdata
- ac_cv_prog_LN_S="ln -s"
-else
- ac_cv_prog_LN_S=ln
-fi
-fi
-LN_S="$ac_cv_prog_LN_S"
-if test "$ac_cv_prog_LN_S" = "ln -s"; then
- echo "$ac_t""yes" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
-echo "configure:1184: checking how to recognise dependant libraries" >&5
+echo "configure:1500: checking how to recognise dependant libraries" >&5
if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
;;
darwin* | rhapsody*)
+ # this will be overwritten by pass_all, but leave it in just in case
lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
lt_cv_file_magic_cmd='/usr/bin/file -L'
case "$host_os" in
lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
;;
esac
+ lt_cv_deplibs_check_method=pass_all
;;
freebsd* )
;;
hpux10.20*|hpux11*)
- lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ case $host_cpu in
+ hppa*)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ ;;
+ ia64*)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+ ;;
+ esac
;;
irix5* | irix6*)
# This must be Linux ELF.
linux-gnu*)
case $host_cpu in
- alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
+ alpha* | mips* | hppa* | i*86 | powerpc* | sparc* | ia64* )
lt_cv_deplibs_check_method=pass_all ;;
*)
# glibc up to 2.1.1 does not perform some relocations on ARM
deplibs_check_method=$lt_cv_deplibs_check_method
echo $ac_n "checking for object suffix""... $ac_c" 1>&6
-echo "configure:1348: checking for object suffix" >&5
+echo "configure:1675: checking for object suffix" >&5
if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
rm -f conftest*
echo 'int i = 1;' > conftest.$ac_ext
-if { (eval echo configure:1354: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1681: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
for ac_file in conftest.*; do
case $ac_file in
*.c) ;;
OBJEXT=$ac_cv_objext
ac_objext=$ac_cv_objext
-if test $host != $build; then
- ac_tool_prefix=${host_alias}-
-else
- ac_tool_prefix=
-fi
-
# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
# Only perform the check for file, if the check method requires it
file_magic*)
if test "$file_magic_cmd" = '$MAGIC_CMD'; then
echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
-echo "configure:1384: checking for ${ac_tool_prefix}file" >&5
+echo "configure:1705: checking for ${ac_tool_prefix}file" >&5
if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$lt_cv_path_MAGIC_CMD"; then
if test -n "$ac_tool_prefix"; then
echo $ac_n "checking for file""... $ac_c" 1>&6
-echo "configure:1446: checking for file" >&5
+echo "configure:1767: checking for file" >&5
if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1517: checking for $ac_word" >&5
+echo "configure:1838: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1549: checking for $ac_word" >&5
+echo "configure:1870: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
set dummy ${ac_tool_prefix}strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1584: checking for $ac_word" >&5
+echo "configure:1905: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "strip", so it can be a program name with args.
set dummy strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1616: checking for $ac_word" >&5
+echo "configure:1937: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case $host in
*-*-irix6*)
# Find out which ABI we are using.
- echo '#line 1683 "configure"' > conftest.$ac_ext
- if { (eval echo configure:1684: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ echo '#line 2004 "configure"' > conftest.$ac_ext
+ if { (eval echo configure:2005: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -melf32bsmip"
+ ;;
+ *N32*)
+ LD="${LD-ld} -melf32bmipn32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -melf64bmip"
+ ;;
+ esac
+ else
case `/usr/bin/file conftest.$ac_objext` in
*32-bit*)
LD="${LD-ld} -32"
LD="${LD-ld} -64"
;;
esac
+ fi
+ fi
+ rm -rf conftest*
+ ;;
+
+ia64-*-hpux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if { (eval echo configure:2038: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ case "`/usr/bin/file conftest.o`" in
+ *ELF-32*)
+ HPUX_IA64_MODE="32"
+ ;;
+ *ELF-64*)
+ HPUX_IA64_MODE="64"
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
+x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if { (eval echo configure:2054: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ case "`/usr/bin/file conftest.o`" in
+ *32-bit*)
+ case $host in
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_i386"
+ ;;
+ ppc64-*linux*|powerpc64-*linux*)
+ LD="${LD-ld} -m elf32ppclinux"
+ ;;
+ s390x-*linux*)
+ LD="${LD-ld} -m elf_s390"
+ ;;
+ sparc64-*linux*)
+ LD="${LD-ld} -m elf32_sparc"
+ ;;
+ esac
+ ;;
+ *64-bit*)
+ case $host in
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_x86_64"
+ ;;
+ ppc*-*linux*|powerpc*-*linux*)
+ LD="${LD-ld} -m elf64ppc"
+ ;;
+ s390*-*linux*)
+ LD="${LD-ld} -m elf64_s390"
+ ;;
+ sparc*-*linux*)
+ LD="${LD-ld} -m elf64_sparc"
+ ;;
+ esac
+ ;;
+ esac
fi
rm -rf conftest*
;;
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf"
echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:1705: checking whether the C compiler needs -belf" >&5
+echo "configure:2098: checking whether the C compiler needs -belf" >&5
if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cross_compiling=$ac_cv_prog_cc_cross
cat > conftest.$ac_ext <<EOF
-#line 1718 "configure"
+#line 2111 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:1725: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2118: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
lt_cv_cc_needs_belf=yes
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1849: checking for $ac_word" >&5
+echo "configure:2242: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1889: checking for a BSD compatible install" >&5
+echo "configure:2282: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:1942: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:2335: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
# Sanity check for the cross-compilation case:
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1971: checking how to run the C preprocessor" >&5
+echo "configure:2364: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 1986 "configure"
+#line 2379 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1992: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2385: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 2003 "configure"
+#line 2396 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2009: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2402: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
-#line 2020 "configure"
+#line 2413 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2026: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2419: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
ac_safe=`echo "stdio.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for stdio.h""... $ac_c" 1>&6
-echo "configure:2052: checking for stdio.h" >&5
+echo "configure:2445: checking for stdio.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2057 "configure"
+#line 2450 "configure"
#include "confdefs.h"
#include <stdio.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2062: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2455: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking for built-in g77 integer types""... $ac_c" 1>&6
-echo "configure:2090: checking for built-in g77 integer types" >&5
+echo "configure:2483: checking for built-in g77 integer types" >&5
if eval "test \"`echo '$''{'libf2c_cv_has_g77_builtin_types'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2095 "configure"
+#line 2488 "configure"
#include "confdefs.h"
int main() {
__g77_ulongint g77ul;
; return 0; }
EOF
-if { (eval echo configure:2105: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2498: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
libf2c_cv_has_g77_builtin_types=yes
else
test -f libI77/makefile && mv libI77/makefile libI77/makefile.ori
test -f libU77/makefile && mv libU77/makefile libU77/makefile.ori
-# Get the version trigger filename from the toplevel
-if [ "${with_gcc_version_trigger+set}" = set ]; then
- gcc_version_trigger=$with_gcc_version_trigger
- gcc_version=`grep version_string ${gcc_version_trigger} | sed -e 's/.*\"\([^ \"]*\)[ \"].*/\1/'`
-else
- gcc_version_trigger=
- gcc_version=UNKNOWN
-fi
-
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-# configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-# same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-# as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:2170: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
- case $nonopt in
- NONE)
- if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
- else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
- fi ;;
- *) host_alias=$nonopt ;;
- esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:2191: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
- case $nonopt in
- NONE) target_alias=$host_alias ;;
- *) target_alias=$nonopt ;;
- esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:2209: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
- case $nonopt in
- NONE) build_alias=$host_alias ;;
- *) build_alias=$nonopt ;;
- esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
- test "$program_prefix$program_suffix$program_transform_name" = \
- NONENONEs,x,x, &&
- program_prefix=${target_alias}-
-
-
subdirs="libU77 libI77 libF77"
# Do Makefile first since g2c.h depends on it and shouldn't get an
s%@oldincludedir@%$oldincludedir%g
s%@infodir@%$infodir%g
s%@mandir@%$mandir%g
-s%@EXEEXT@%$EXEEXT%g
-s%@CC@%$CC%g
+s%@toplevel_srcdir@%$toplevel_srcdir%g
s%@host@%$host%g
s%@host_alias@%$host_alias%g
s%@host_cpu@%$host_cpu%g
s%@host_vendor@%$host_vendor%g
s%@host_os@%$host_os%g
+s%@target@%$target%g
+s%@target_alias@%$target_alias%g
+s%@target_cpu@%$target_cpu%g
+s%@target_vendor@%$target_vendor%g
+s%@target_os@%$target_os%g
s%@build@%$build%g
s%@build_alias@%$build_alias%g
s%@build_cpu@%$build_cpu%g
s%@build_vendor@%$build_vendor%g
s%@build_os@%$build_os%g
+s%@glibcpp_builddir@%$glibcpp_builddir%g
+s%@glibcpp_srcdir@%$glibcpp_srcdir%g
s%@LN_S@%$LN_S%g
-s%@OBJEXT@%$OBJEXT%g
-s%@RANLIB@%$RANLIB%g
-s%@STRIP@%$STRIP%g
-s%@LIBTOOL@%$LIBTOOL%g
+s%@CC@%$CC%g
+s%@AS@%$AS%g
s%@AR@%$AR%g
+s%@RANLIB@%$RANLIB%g
s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@CPP@%$CPP%g
+s%@EXEEXT@%$EXEEXT%g
s%@gcc_version@%$gcc_version%g
s%@gcc_version_trigger@%$gcc_version_trigger%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
+s%@glibcpp_prefixdir@%$glibcpp_prefixdir%g
+s%@glibcpp_toolexecdir@%$glibcpp_toolexecdir%g
+s%@glibcpp_toolexeclibdir@%$glibcpp_toolexeclibdir%g
+s%@OBJEXT@%$OBJEXT%g
+s%@STRIP@%$STRIP%g
+s%@LIBTOOL@%$LIBTOOL%g
+s%@SET_MAKE@%$SET_MAKE%g
+s%@CPP@%$CPP%g
s%@subdirs@%$subdirs%g
CEOF
with_target_subdir=${with_target_subdir}
with_multisubdir=${with_multisubdir}
ac_configure_args="--enable-multilib ${ac_configure_args}"
+toplevel_srcdir=${toplevel_srcdir}
CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-topsrcdir=${topsrcdir}
+ORIGINAL_LD_FOR_MULTILIBS="${ORIGINAL_LD_FOR_MULTILIBS}"
EOF
cat >> $CONFIG_STATUS <<\EOF
test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h
if test -n "$CONFIG_FILES"; then
+ LD="${ORIGINAL_LD_FOR_MULTILIBS}"
if test -n "${with_target_subdir}"; then
# FIXME: We shouldn't need to set ac_file
ac_file=Makefile
- . ${topsrcdir}/config-ml.in
+ . ${toplevel_srcdir}/config-ml.in
touch g2c.h # to keep it more recent than Makefile
fi
fi
OSDN Git Service
