-/* Allocate and read RTL for GNU C Compiler.
- Copyright (C) 1987, 1988, 1991, 1994, 1997, 1998 Free Software Foundation, Inc.
+/* RTL utility routines.
+ Copyright (C) 1987, 1988, 1991, 1994, 1997, 1998, 1999, 2000, 2001, 2002,
+ 2003 Free Software Foundation, Inc.
-This file is part of GNU CC.
+This file is part of GCC.
-GNU CC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
+GCC is free software; you can redistribute it and/or modify it under
+the terms of the GNU General Public License as published by the Free
+Software Foundation; either version 2, or (at your option) any later
+version.
-GNU CC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
+GCC is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or
+FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+for more details.
You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING. If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA. */
-
+along with GCC; see the file COPYING. If not, write to the Free
+Software Foundation, 59 Temple Place - Suite 330, Boston, MA
+02111-1307, USA. */
#include "config.h"
#include "system.h"
+#include "coretypes.h"
+#include "tm.h"
#include "rtl.h"
#include "real.h"
-#include "bitmap.h"
-
-#include "obstack.h"
-#define obstack_chunk_alloc xmalloc
-#define obstack_chunk_free free
-
-#ifndef DIR_SEPARATOR
-#define DIR_SEPARATOR '/'
-#endif
-
-/* Obstack used for allocating RTL objects.
- Between functions, this is the permanent_obstack.
- While parsing and expanding a function, this is maybepermanent_obstack
- so we can save it if it is an inline function.
- During optimization and output, this is function_obstack. */
+#include "ggc.h"
+#include "errors.h"
-extern struct obstack *rtl_obstack;
\f
-
-/* Calculate the format for CONST_DOUBLE. This depends on the relative
- widths of HOST_WIDE_INT and REAL_VALUE_TYPE.
- We only need to go out to e0wwww, since min(HOST_WIDE_INT)==32 and
- max(LONG_DOUBLE_TYPE_SIZE)==128.
- This is duplicated in gengenrtl.c.
- A number of places assume that there are always at least two 'w'
- slots in a CONST_DOUBLE, so we provide them even if one would suffice. */
-#if HOST_BITS_PER_WIDE_INT >= LONG_DOUBLE_TYPE_SIZE
-#define CONST_DOUBLE_FORMAT "e0ww"
-#elif HOST_BITS_PER_WIDE_INT*2 >= LONG_DOUBLE_TYPE_SIZE
-#define CONST_DOUBLE_FORMAT "e0ww"
-#elif HOST_BITS_PER_WIDE_INT*3 >= LONG_DOUBLE_TYPE_SIZE
-#define CONST_DOUBLE_FORMAT "e0www"
-#elif HOST_BITS_PER_WIDE_INT*4 >= LONG_DOUBLE_TYPE_SIZE
-#define CONST_DOUBLE_FORMAT "e0wwww"
-#else
-#define CONST_DOUBLE_FORMAT /* nothing - will cause syntax error */
-#endif
-
/* Indexed by rtx code, gives number of operands for an rtx with that code.
Does NOT include rtx header data (code and links). */
#define DEF_RTL_EXPR(ENUM, NAME, FORMAT, CLASS) sizeof FORMAT - 1 ,
-const int rtx_length[NUM_RTX_CODE + 1] = {
+const unsigned char rtx_length[NUM_RTX_CODE] = {
#include "rtl.def"
};
#define DEF_RTL_EXPR(ENUM, NAME, FORMAT, CLASS) NAME ,
-const char * const rtx_name[] = {
+const char * const rtx_name[NUM_RTX_CODE] = {
#include "rtl.def" /* rtl expressions are documented here */
};
/* Indexed by machine mode, gives the name of that machine mode.
This name does not include the letters "mode". */
-#define DEF_MACHMODE(SYM, NAME, CLASS, SIZE, UNIT, WIDER) NAME,
+#define DEF_MACHMODE(SYM, NAME, CLASS, BITSIZE, SIZE, UNIT, WIDER, INNER) NAME,
-const char * const mode_name[(int) MAX_MACHINE_MODE + 1] = {
+const char * const mode_name[NUM_MACHINE_MODES] = {
#include "machmode.def"
- /* Add an extra field to avoid a core dump if someone tries to convert
- MAX_MACHINE_MODE to a string. */
- ""
};
#undef DEF_MACHMODE
-/* Indexed by machine mode, gives the length of the mode, in bytes.
- GET_MODE_CLASS uses this. */
+/* Indexed by machine mode, gives the class mode for GET_MODE_CLASS. */
+
+#define DEF_MACHMODE(SYM, NAME, CLASS, BITSIZE, SIZE, UNIT, WIDER, INNER) CLASS,
+
+const enum mode_class mode_class[NUM_MACHINE_MODES] = {
+#include "machmode.def"
+};
+
+#undef DEF_MACHMODE
+
+/* Indexed by machine mode, gives the length of the mode, in bits.
+ GET_MODE_BITSIZE uses this. */
-#define DEF_MACHMODE(SYM, NAME, CLASS, SIZE, UNIT, WIDER) CLASS,
+#define DEF_MACHMODE(SYM, NAME, CLASS, BITSIZE, SIZE, UNIT, WIDER, INNER) BITSIZE,
-const enum mode_class mode_class[(int) MAX_MACHINE_MODE] = {
+const unsigned short mode_bitsize[NUM_MACHINE_MODES] = {
#include "machmode.def"
};
/* Indexed by machine mode, gives the length of the mode, in bytes.
GET_MODE_SIZE uses this. */
-#define DEF_MACHMODE(SYM, NAME, CLASS, SIZE, UNIT, WIDER) SIZE,
+#define DEF_MACHMODE(SYM, NAME, CLASS, BITSIZE, SIZE, UNIT, WIDER, INNER) SIZE,
-const int mode_size[(int) MAX_MACHINE_MODE] = {
+const unsigned char mode_size[NUM_MACHINE_MODES] = {
#include "machmode.def"
};
/* Indexed by machine mode, gives the length of the mode's subunit.
GET_MODE_UNIT_SIZE uses this. */
-#define DEF_MACHMODE(SYM, NAME, CLASS, SIZE, UNIT, WIDER) UNIT,
+#define DEF_MACHMODE(SYM, NAME, CLASS, BITSIZE, SIZE, UNIT, WIDER, INNER) UNIT,
-const int mode_unit_size[(int) MAX_MACHINE_MODE] = {
+const unsigned char mode_unit_size[NUM_MACHINE_MODES] = {
#include "machmode.def" /* machine modes are documented here */
};
(QI -> HI -> SI -> DI, etc.) Widening multiply instructions
use this. */
-#define DEF_MACHMODE(SYM, NAME, CLASS, SIZE, UNIT, WIDER) \
+#define DEF_MACHMODE(SYM, NAME, CLASS, BITSIZE, SIZE, UNIT, WIDER, INNER) \
(unsigned char) WIDER,
-const unsigned char mode_wider_mode[(int) MAX_MACHINE_MODE] = {
+const unsigned char mode_wider_mode[NUM_MACHINE_MODES] = {
#include "machmode.def" /* machine modes are documented here */
};
#undef DEF_MACHMODE
-#define DEF_MACHMODE(SYM, NAME, CLASS, SIZE, UNIT, WIDER) \
- ((SIZE) * BITS_PER_UNIT >= HOST_BITS_PER_WIDE_INT) ? ~(unsigned HOST_WIDE_INT)0 : ((unsigned HOST_WIDE_INT) 1 << (SIZE) * BITS_PER_UNIT) - 1,
+#define DEF_MACHMODE(SYM, NAME, CLASS, BITSIZE, SIZE, UNIT, WIDER, INNER) \
+ ((BITSIZE) >= HOST_BITS_PER_WIDE_INT) ? ~(unsigned HOST_WIDE_INT) 0 : ((unsigned HOST_WIDE_INT) 1 << (BITSIZE)) - 1,
/* Indexed by machine mode, gives mask of significant bits in mode. */
-const unsigned HOST_WIDE_INT mode_mask_array[(int) MAX_MACHINE_MODE] = {
+const unsigned HOST_WIDE_INT mode_mask_array[NUM_MACHINE_MODES] = {
+#include "machmode.def"
+};
+
+#undef DEF_MACHMODE
+
+#define DEF_MACHMODE(SYM, NAME, CLASS, BITSIZE, SIZE, UNIT, WIDER, INNER) INNER,
+
+/* Indexed by machine mode, gives the mode of the inner elements in a
+ vector type. */
+
+const enum machine_mode inner_mode_array[NUM_MACHINE_MODES] = {
#include "machmode.def"
};
/* Indexed by mode class, gives the narrowest mode for each class.
The Q modes are always of width 1 (2 for complex) - it is impossible
- for any mode to be narrower. */
+ for any mode to be narrower.
+
+ Note that we use QImode instead of BImode for MODE_INT, since
+ otherwise the middle end will try to use it for bitfields in
+ structures and the like, which we do not want. Only the target
+ md file should generate BImode widgets. */
const enum machine_mode class_narrowest_mode[(int) MAX_MODE_CLASS] = {
/* MODE_RANDOM */ VOIDmode,
/* MODE_PARTIAL_INT */ PQImode,
/* MODE_CC */ CCmode,
/* MODE_COMPLEX_INT */ CQImode,
- /* MODE_COMPLEX_FLOAT */ QCmode
+ /* MODE_COMPLEX_FLOAT */ QCmode,
+ /* MODE_VECTOR_INT */ V1DImode,
+ /* MODE_VECTOR_FLOAT */ V2SFmode
};
-
+
/* Indexed by rtx code, gives a sequence of operand-types for
rtx's of that code. The sequence is a C string in which
each character describes one operand. */
-const char * const rtx_format[] = {
+const char * const rtx_format[NUM_RTX_CODE] = {
/* "*" undefined.
can cause a warning message
"0" field is unused (or used in a phase-dependent manner)
prints the string
"S" like "s", but optional:
the containing rtx may end before this operand
+ "T" like "s", but treated specially by the RTL reader;
+ only found in machine description patterns.
"e" a pointer to an rtl expression
prints the expression
"E" a pointer to a vector that points to a number of rtl expressions
"u" a pointer to another insn
prints the uid of the insn.
"b" is a pointer to a bitmap header.
- "t" is a tree pointer. */
+ "B" is a basic block pointer.
+ "t" is a tree pointer. */
#define DEF_RTL_EXPR(ENUM, NAME, FORMAT, CLASS) FORMAT ,
#include "rtl.def" /* rtl expressions are defined here */
/* Indexed by rtx code, gives a character representing the "class" of
that rtx code. See rtl.def for documentation on the defined classes. */
-const char rtx_class[] = {
-#define DEF_RTL_EXPR(ENUM, NAME, FORMAT, CLASS) CLASS,
+const char rtx_class[NUM_RTX_CODE] = {
+#define DEF_RTL_EXPR(ENUM, NAME, FORMAT, CLASS) CLASS,
#include "rtl.def" /* rtl expressions are defined here */
#undef DEF_RTL_EXPR
};
/* Names for kinds of NOTEs and REG_NOTEs. */
-const char * const note_insn_name[] = { 0 , "NOTE_INSN_DELETED",
- "NOTE_INSN_BLOCK_BEG", "NOTE_INSN_BLOCK_END",
- "NOTE_INSN_LOOP_BEG", "NOTE_INSN_LOOP_END",
- "NOTE_INSN_FUNCTION_END", "NOTE_INSN_SETJMP",
- "NOTE_INSN_LOOP_CONT", "NOTE_INSN_LOOP_VTOP",
- "NOTE_INSN_PROLOGUE_END", "NOTE_INSN_EPILOGUE_BEG",
- "NOTE_INSN_DELETED_LABEL", "NOTE_INSN_FUNCTION_BEG",
- "NOTE_INSN_EH_REGION_BEG", "NOTE_INSN_EH_REGION_END",
- "NOTE_REPEATED_LINE_NUMBER", "NOTE_INSN_RANGE_START",
- "NOTE_INSN_RANGE_END", "NOTE_INSN_LIVE",
- "NOTE_INSN_BASIC_BLOCK" };
-
-const char * const reg_note_name[] = { "", "REG_DEAD", "REG_INC", "REG_EQUIV", "REG_WAS_0",
- "REG_EQUAL", "REG_RETVAL", "REG_LIBCALL",
- "REG_NONNEG", "REG_NO_CONFLICT", "REG_UNUSED",
- "REG_CC_SETTER", "REG_CC_USER", "REG_LABEL",
- "REG_DEP_ANTI", "REG_DEP_OUTPUT", "REG_BR_PROB",
- "REG_EXEC_COUNT", "REG_NOALIAS", "REG_SAVE_AREA",
- "REG_BR_PRED", "REG_EH_CONTEXT",
- "REG_FRAME_RELATED_EXPR", "REG_EH_REGION",
- "REG_EH_RETHROW" };
-
-static void dump_and_abort PROTO((int, int, FILE *)) ATTRIBUTE_NORETURN;
-static void read_name PROTO((char *, FILE *));
+const char * const note_insn_name[NOTE_INSN_MAX - NOTE_INSN_BIAS] =
+{
+ "", "NOTE_INSN_DELETED",
+ "NOTE_INSN_BLOCK_BEG", "NOTE_INSN_BLOCK_END",
+ "NOTE_INSN_LOOP_BEG", "NOTE_INSN_LOOP_END",
+ "NOTE_INSN_LOOP_CONT", "NOTE_INSN_LOOP_VTOP",
+ "NOTE_INSN_LOOP_END_TOP_COND", "NOTE_INSN_FUNCTION_END",
+ "NOTE_INSN_PROLOGUE_END", "NOTE_INSN_EPILOGUE_BEG",
+ "NOTE_INSN_DELETED_LABEL", "NOTE_INSN_FUNCTION_BEG",
+ "NOTE_INSN_EH_REGION_BEG", "NOTE_INSN_EH_REGION_END",
+ "NOTE_INSN_REPEATED_LINE_NUMBER",
+ "NOTE_INSN_BASIC_BLOCK", "NOTE_INSN_EXPECTED_VALUE",
+ "NOTE_INSN_PREDICTION"
+};
+
+const char * const reg_note_name[] =
+{
+ "", "REG_DEAD", "REG_INC", "REG_EQUIV", "REG_EQUAL",
+ "REG_WAS_0", "REG_RETVAL", "REG_LIBCALL", "REG_NONNEG",
+ "REG_NO_CONFLICT", "REG_UNUSED", "REG_CC_SETTER", "REG_CC_USER",
+ "REG_LABEL", "REG_DEP_ANTI", "REG_DEP_OUTPUT", "REG_BR_PROB",
+ "REG_NOALIAS", "REG_SAVE_AREA", "REG_BR_PRED",
+ "REG_FRAME_RELATED_EXPR", "REG_EH_CONTEXT", "REG_EH_REGION",
+ "REG_SAVE_NOTE", "REG_MAYBE_DEAD", "REG_NORETURN",
+ "REG_NON_LOCAL_GOTO", "REG_SETJMP", "REG_ALWAYS_RETURN",
+ "REG_VTABLE_REF"
+};
+
\f
/* Allocate an rtx vector of N elements.
Store the length, and initialize all elements to zero. */
int n;
{
rtvec rt;
- int i;
-
- rt = (rtvec) obstack_alloc (rtl_obstack,
- sizeof (struct rtvec_def)
- + (( n - 1) * sizeof (rtx)));
+ rt = ggc_alloc_rtvec (n);
/* clear out the vector */
- PUT_NUM_ELEM (rt, n);
-
- for (i = 0; i < n; i++)
- rt->elem[i] = 0;
+ memset (&rt->elem[0], 0, n * sizeof (rtx));
+ PUT_NUM_ELEM (rt, n);
return rt;
}
RTX_CODE code;
{
rtx rt;
- register struct obstack *ob = rtl_obstack;
- register int nelts = GET_RTX_LENGTH (code);
- register int length = sizeof (struct rtx_def)
- + (nelts - 1) * sizeof (rtunion);
-
- /* This function is called more than any other in GCC,
- so we manipulate the obstack directly.
+ int n = GET_RTX_LENGTH (code);
- Even though rtx objects are word aligned, we may be sharing an obstack
- with tree nodes, which may have to be double-word aligned. So align
- our length to the alignment mask in the obstack. */
+ rt = ggc_alloc_rtx (n);
- length = (length + ob->alignment_mask) & ~ ob->alignment_mask;
-
- if (ob->chunk_limit - ob->next_free < length)
- _obstack_newchunk (ob, length);
- rt = (rtx)ob->object_base;
- ob->next_free += length;
- ob->object_base = ob->next_free;
-
- /* We want to clear everything up to the FLD array. Normally, this is
- one int, but we don't want to assume that and it isn't very portable
- anyway; this is. */
+ /* We want to clear everything up to the FLD array. Normally, this
+ is one int, but we don't want to assume that and it isn't very
+ portable anyway; this is. */
memset (rt, 0, sizeof (struct rtx_def) - sizeof (rtunion));
-
PUT_CODE (rt, code);
-
return rt;
}
-/* Free the rtx X and all RTL allocated since X. */
-
-void
-rtx_free (x)
- rtx x;
-{
- obstack_free (rtl_obstack, x);
-}
\f
/* Create a new copy of an rtx.
Recursively copies the operands of the rtx,
rtx
copy_rtx (orig)
- register rtx orig;
+ rtx orig;
{
- register rtx copy;
- register int i, j;
- register RTX_CODE code;
- register const char *format_ptr;
+ rtx copy;
+ int i, j;
+ RTX_CODE code;
+ const char *format_ptr;
code = GET_CODE (orig);
case QUEUED:
case CONST_INT:
case CONST_DOUBLE:
+ case CONST_VECTOR:
case SYMBOL_REF:
case CODE_LABEL:
case PC:
/* We do not copy the USED flag, which is used as a mark bit during
walks over the RTL. */
- copy->used = 0;
+ RTX_FLAG (copy, used) = 0;
- /* We do not copy JUMP, CALL, or FRAME_RELATED for INSNs. */
+ /* We do not copy FRAME_RELATED for INSNs. */
if (GET_RTX_CLASS (code) == 'i')
- {
- copy->jump = 0;
- copy->call = 0;
- copy->frame_related = 0;
- }
-
+ RTX_FLAG (copy, frame_related) = 0;
+ RTX_FLAG (copy, jump) = RTX_FLAG (orig, jump);
+ RTX_FLAG (copy, call) = RTX_FLAG (orig, call);
+
format_ptr = GET_RTX_FORMAT (GET_CODE (copy));
for (i = 0; i < GET_RTX_LENGTH (GET_CODE (copy)); i++)
{
+ copy->fld[i] = orig->fld[i];
switch (*format_ptr++)
{
case 'e':
- XEXP (copy, i) = XEXP (orig, i);
if (XEXP (orig, i) != NULL)
XEXP (copy, i) = copy_rtx (XEXP (orig, i));
break;
- case '0':
- case 'u':
- XEXP (copy, i) = XEXP (orig, i);
- break;
-
case 'E':
case 'V':
- XVEC (copy, i) = XVEC (orig, i);
if (XVEC (orig, i) != NULL)
{
XVEC (copy, i) = rtvec_alloc (XVECLEN (orig, i));
}
break;
- case 'b':
- {
- bitmap new_bits = BITMAP_OBSTACK_ALLOC (rtl_obstack);
- bitmap_copy (new_bits, XBITMAP (orig, i));
- XBITMAP (copy, i) = new_bits;
- break;
- }
-
case 't':
- XTREE (copy, i) = XTREE (orig, i);
- break;
-
case 'w':
- XWINT (copy, i) = XWINT (orig, i);
- break;
-
case 'i':
- XINT (copy, i) = XINT (orig, i);
- break;
-
case 's':
case 'S':
- XSTR (copy, i) = XSTR (orig, i);
+ case 'T':
+ case 'u':
+ case 'B':
+ case '0':
+ /* These are left unchanged. */
break;
default:
return copy;
}
-/* Similar to `copy_rtx' except that if MAY_SHARE is present, it is
- placed in the result directly, rather than being copied. */
+/* Create a new copy of an rtx. Only copy just one level. */
rtx
-copy_most_rtx (orig, may_share)
- register rtx orig;
- register rtx may_share;
+shallow_copy_rtx (orig)
+ rtx orig;
{
- register rtx copy;
- register int i, j;
- register RTX_CODE code;
- register const char *format_ptr;
+ RTX_CODE code = GET_CODE (orig);
+ size_t n = GET_RTX_LENGTH (code);
+ rtx copy = ggc_alloc_rtx (n);
- if (orig == may_share)
- return orig;
+ memcpy (copy, orig,
+ sizeof (struct rtx_def) + sizeof (rtunion) * (n - 1));
- code = GET_CODE (orig);
+ return copy;
+}
+\f
+/* This is 1 until after the rtl generation pass. */
+int rtx_equal_function_value_matters;
+/* Nonzero when we are generating CONCATs. */
+int generating_concat_p;
+\f
+/* Return 1 if X and Y are identical-looking rtx's.
+ This is the Lisp function EQUAL for rtx arguments. */
+
+int
+rtx_equal_p (x, y)
+ rtx x, y;
+{
+ int i;
+ int j;
+ enum rtx_code code;
+ const char *fmt;
+
+ if (x == y)
+ return 1;
+ if (x == 0 || y == 0)
+ return 0;
+
+ code = GET_CODE (x);
+ /* Rtx's of different codes cannot be equal. */
+ if (code != GET_CODE (y))
+ return 0;
+
+ /* (MULT:SI x y) and (MULT:HI x y) are NOT equivalent.
+ (REG:SI x) and (REG:HI x) are NOT equivalent. */
+
+ if (GET_MODE (x) != GET_MODE (y))
+ return 0;
+
+ /* Some RTL can be compared nonrecursively. */
switch (code)
{
case REG:
- case QUEUED:
- case CONST_INT:
- case CONST_DOUBLE:
+ /* Until rtl generation is complete, don't consider a reference
+ to the return register of the current function the same as
+ the return from a called function. This eases the job of
+ function integration. Once the distinction is no longer
+ needed, they can be considered equivalent. */
+ return (REGNO (x) == REGNO (y)
+ && (! rtx_equal_function_value_matters
+ || REG_FUNCTION_VALUE_P (x) == REG_FUNCTION_VALUE_P (y)));
+
+ case LABEL_REF:
+ return XEXP (x, 0) == XEXP (y, 0);
+
case SYMBOL_REF:
- case CODE_LABEL:
- case PC:
- case CC0:
- return orig;
+ return XSTR (x, 0) == XSTR (y, 0);
+
+ case SCRATCH:
+ case CONST_DOUBLE:
+ case CONST_INT:
+ case CONST_VECTOR:
+ return 0;
+
default:
break;
}
- copy = rtx_alloc (code);
- PUT_MODE (copy, GET_MODE (orig));
- copy->in_struct = orig->in_struct;
- copy->volatil = orig->volatil;
- copy->unchanging = orig->unchanging;
- copy->integrated = orig->integrated;
-
- format_ptr = GET_RTX_FORMAT (GET_CODE (copy));
+ /* Compare the elements. If any pair of corresponding elements
+ fail to match, return 0 for the whole things. */
- for (i = 0; i < GET_RTX_LENGTH (GET_CODE (copy)); i++)
+ fmt = GET_RTX_FORMAT (code);
+ for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
{
- switch (*format_ptr++)
+ switch (fmt[i])
{
- case 'e':
- XEXP (copy, i) = XEXP (orig, i);
- if (XEXP (orig, i) != NULL && XEXP (orig, i) != may_share)
- XEXP (copy, i) = copy_most_rtx (XEXP (orig, i), may_share);
+ case 'w':
+ if (XWINT (x, i) != XWINT (y, i))
+ return 0;
break;
- case '0':
- case 'u':
- XEXP (copy, i) = XEXP (orig, i);
+ case 'n':
+ case 'i':
+ if (XINT (x, i) != XINT (y, i))
+ return 0;
break;
- case 'E':
case 'V':
- XVEC (copy, i) = XVEC (orig, i);
- if (XVEC (orig, i) != NULL)
- {
- XVEC (copy, i) = rtvec_alloc (XVECLEN (orig, i));
- for (j = 0; j < XVECLEN (copy, i); j++)
- XVECEXP (copy, i, j)
- = copy_most_rtx (XVECEXP (orig, i, j), may_share);
- }
+ case 'E':
+ /* Two vectors must have the same length. */
+ if (XVECLEN (x, i) != XVECLEN (y, i))
+ return 0;
+
+ /* And the corresponding elements must match. */
+ for (j = 0; j < XVECLEN (x, i); j++)
+ if (rtx_equal_p (XVECEXP (x, i, j), XVECEXP (y, i, j)) == 0)
+ return 0;
break;
- case 'w':
- XWINT (copy, i) = XWINT (orig, i);
+ case 'e':
+ if (rtx_equal_p (XEXP (x, i), XEXP (y, i)) == 0)
+ return 0;
break;
- case 'n':
- case 'i':
- XINT (copy, i) = XINT (orig, i);
+ case 'S':
+ case 's':
+ if ((XSTR (x, i) || XSTR (y, i))
+ && (! XSTR (x, i) || ! XSTR (y, i)
+ || strcmp (XSTR (x, i), XSTR (y, i))))
+ return 0;
break;
- case 't':
- XTREE (copy, i) = XTREE (orig, i);
+ case 'u':
+ /* These are just backpointers, so they don't matter. */
break;
- case 's':
- case 'S':
- XSTR (copy, i) = XSTR (orig, i);
+ case '0':
+ case 't':
break;
+ /* It is believed that rtx's at this level will never
+ contain anything but integers and other rtx's,
+ except for within LABEL_REFs and SYMBOL_REFs. */
default:
abort ();
}
}
- return copy;
-}
-
-/* Create a new copy of an rtx. Only copy just one level. */
-rtx
-shallow_copy_rtx (orig)
- rtx orig;
-{
- register int i;
- register RTX_CODE code = GET_CODE (orig);
- register rtx copy = rtx_alloc (code);
-
- PUT_MODE (copy, GET_MODE (orig));
- copy->in_struct = orig->in_struct;
- copy->volatil = orig->volatil;
- copy->unchanging = orig->unchanging;
- copy->integrated = orig->integrated;
-
- for (i = 0; i < GET_RTX_LENGTH (code); i++)
- copy->fld[i] = orig->fld[i];
-
- return copy;
+ return 1;
}
\f
-/* Subroutines of read_rtx. */
-
-/* Dump code after printing a message. Used when read_rtx finds
- invalid data. */
-
-static void
-dump_and_abort (expected_c, actual_c, infile)
- int expected_c, actual_c;
- FILE *infile;
+#if defined ENABLE_RTL_CHECKING && (GCC_VERSION >= 2007)
+void
+rtl_check_failed_bounds (r, n, file, line, func)
+ rtx r;
+ int n;
+ const char *file;
+ int line;
+ const char *func;
{
- int c, i;
-
- if (expected_c >= 0)
- fprintf (stderr,
- "Expected character %c. Found character %c.",
- expected_c, actual_c);
- fprintf (stderr, " At file position: %ld\n", ftell (infile));
- fprintf (stderr, "Following characters are:\n\t");
- for (i = 0; i < 200; i++)
- {
- c = getc (infile);
- if (EOF == c) break;
- putc (c, stderr);
- }
- fprintf (stderr, "Aborting.\n");
- abort ();
+ internal_error
+ ("RTL check: access of elt %d of `%s' with last elt %d in %s, at %s:%d",
+ n, GET_RTX_NAME (GET_CODE (r)), GET_RTX_LENGTH (GET_CODE (r)) - 1,
+ func, trim_filename (file), line);
}
-/* Read chars from INFILE until a non-whitespace char
- and return that. Comments, both Lisp style and C style,
- are treated as whitespace.
- Tools such as genflags use this function. */
-
-int
-read_skip_spaces (infile)
- FILE *infile;
+void
+rtl_check_failed_type1 (r, n, c1, file, line, func)
+ rtx r;
+ int n;
+ int c1;
+ const char *file;
+ int line;
+ const char *func;
{
- register int c;
- while ((c = getc (infile)))
- {
- if (c == ' ' || c == '\n' || c == '\t' || c == '\f')
- ;
- else if (c == ';')
- {
- while ((c = getc (infile)) && c != '\n' && c != EOF)
- ;
- }
- else if (c == '/')
- {
- register int prevc;
- c = getc (infile);
- if (c != '*')
- dump_and_abort ('*', c, infile);
-
- prevc = 0;
- while ((c = getc (infile)) && c != EOF)
- {
- if (prevc == '*' && c == '/')
- break;
- prevc = c;
- }
- }
- else break;
- }
- return c;
+ internal_error
+ ("RTL check: expected elt %d type '%c', have '%c' (rtx %s) in %s, at %s:%d",
+ n, c1, GET_RTX_FORMAT (GET_CODE (r))[n], GET_RTX_NAME (GET_CODE (r)),
+ func, trim_filename (file), line);
}
-/* Read an rtx code name into the buffer STR[].
- It is terminated by any of the punctuation chars of rtx printed syntax. */
-
-static void
-read_name (str, infile)
- char *str;
- FILE *infile;
+void
+rtl_check_failed_type2 (r, n, c1, c2, file, line, func)
+ rtx r;
+ int n;
+ int c1;
+ int c2;
+ const char *file;
+ int line;
+ const char *func;
{
- register char *p;
- register int c;
-
- c = read_skip_spaces(infile);
-
- p = str;
- while (1)
- {
- if (c == ' ' || c == '\n' || c == '\t' || c == '\f')
- break;
- if (c == ':' || c == ')' || c == ']' || c == '"' || c == '/'
- || c == '(' || c == '[')
- {
- ungetc (c, infile);
- break;
- }
- *p++ = c;
- c = getc (infile);
- }
- if (p == str)
- {
- fprintf (stderr, "missing name or number");
- dump_and_abort (-1, -1, infile);
- }
-
- *p = 0;
+ internal_error
+ ("RTL check: expected elt %d type '%c' or '%c', have '%c' (rtx %s) in %s, at %s:%d",
+ n, c1, c2, GET_RTX_FORMAT (GET_CODE (r))[n], GET_RTX_NAME (GET_CODE (r)),
+ func, trim_filename (file), line);
}
-\f
-/* Provide a version of a function to read a long long if the system does
- not provide one. */
-#if HOST_BITS_PER_WIDE_INT > HOST_BITS_PER_LONG && !defined(HAVE_ATOLL) && !defined(HAVE_ATOQ)
-HOST_WIDE_INT
-atoll(p)
- const char *p;
-{
- int neg = 0;
- HOST_WIDE_INT tmp_wide;
-
- while (ISSPACE(*p))
- p++;
- if (*p == '-')
- neg = 1, p++;
- else if (*p == '+')
- p++;
-
- tmp_wide = 0;
- while (ISDIGIT(*p))
- {
- HOST_WIDE_INT new_wide = tmp_wide*10 + (*p - '0');
- if (new_wide < tmp_wide)
- {
- /* Return INT_MAX equiv on overflow. */
- tmp_wide = (~(unsigned HOST_WIDE_INT)0) >> 1;
- break;
- }
- tmp_wide = new_wide;
- p++;
- }
- if (neg)
- tmp_wide = -tmp_wide;
- return tmp_wide;
+void
+rtl_check_failed_code1 (r, code, file, line, func)
+ rtx r;
+ enum rtx_code code;
+ const char *file;
+ int line;
+ const char *func;
+{
+ internal_error ("RTL check: expected code `%s', have `%s' in %s, at %s:%d",
+ GET_RTX_NAME (code), GET_RTX_NAME (GET_CODE (r)), func,
+ trim_filename (file), line);
}
-#endif
-
-/* Read an rtx in printed representation from INFILE
- and return an actual rtx in core constructed accordingly.
- read_rtx is not used in the compiler proper, but rather in
- the utilities gen*.c that construct C code from machine descriptions. */
-rtx
-read_rtx (infile)
- FILE *infile;
+void
+rtl_check_failed_code2 (r, code1, code2, file, line, func)
+ rtx r;
+ enum rtx_code code1, code2;
+ const char *file;
+ int line;
+ const char *func;
{
- register int i, j, list_counter;
- RTX_CODE tmp_code;
- register const char *format_ptr;
- /* tmp_char is a buffer used for reading decimal integers
- and names of rtx types and machine modes.
- Therefore, 256 must be enough. */
- char tmp_char[256];
- rtx return_rtx;
- register int c;
- int tmp_int;
- HOST_WIDE_INT tmp_wide;
-
- /* Linked list structure for making RTXs: */
- struct rtx_list
- {
- struct rtx_list *next;
- rtx value; /* Value of this node... */
- };
-
- c = read_skip_spaces (infile); /* Should be open paren. */
- if (c != '(')
- dump_and_abort ('(', c, infile);
-
- read_name (tmp_char, infile);
-
- tmp_code = UNKNOWN;
-
- for (i=0; i < NUM_RTX_CODE; i++) /* @@ might speed this search up */
- {
- if (!(strcmp (tmp_char, GET_RTX_NAME (i))))
- {
- tmp_code = (RTX_CODE) i; /* get value for name */
- break;
- }
- }
- if (tmp_code == UNKNOWN)
- {
- fprintf (stderr,
- "Unknown rtx read in rtl.read_rtx(). Code name was %s .",
- tmp_char);
- }
- /* (NIL) stands for an expression that isn't there. */
- if (tmp_code == NIL)
- {
- /* Discard the closeparen. */
- while ((c = getc (infile)) && c != ')');
- return 0;
- }
-
- return_rtx = rtx_alloc (tmp_code); /* if we end up with an insn expression
- then we free this space below. */
- format_ptr = GET_RTX_FORMAT (GET_CODE (return_rtx));
-
- /* If what follows is `: mode ', read it and
- store the mode in the rtx. */
-
- i = read_skip_spaces (infile);
- if (i == ':')
- {
- register int k;
- read_name (tmp_char, infile);
- for (k = 0; k < NUM_MACHINE_MODES; k++)
- if (!strcmp (GET_MODE_NAME (k), tmp_char))
- break;
-
- PUT_MODE (return_rtx, (enum machine_mode) k );
- }
- else
- ungetc (i, infile);
-
- for (i = 0; i < GET_RTX_LENGTH (GET_CODE (return_rtx)); i++)
- switch (*format_ptr++)
- {
- /* 0 means a field for internal use only.
- Don't expect it to be present in the input. */
- case '0':
- break;
-
- case 'e':
- case 'u':
- XEXP (return_rtx, i) = read_rtx (infile);
- break;
-
- case 'V':
- /* 'V' is an optional vector: if a closeparen follows,
- just store NULL for this element. */
- c = read_skip_spaces (infile);
- ungetc (c, infile);
- if (c == ')')
- {
- XVEC (return_rtx, i) = 0;
- break;
- }
- /* Now process the vector. */
-
- case 'E':
- {
- register struct rtx_list *next_rtx, *rtx_list_link;
- struct rtx_list *list_rtx = NULL;
-
- c = read_skip_spaces (infile);
- if (c != '[')
- dump_and_abort ('[', c, infile);
-
- /* add expressions to a list, while keeping a count */
- next_rtx = NULL;
- list_counter = 0;
- while ((c = read_skip_spaces (infile)) && c != ']')
- {
- ungetc (c, infile);
- list_counter++;
- rtx_list_link = (struct rtx_list *)
- alloca (sizeof (struct rtx_list));
- rtx_list_link->value = read_rtx (infile);
- if (next_rtx == 0)
- list_rtx = rtx_list_link;
- else
- next_rtx->next = rtx_list_link;
- next_rtx = rtx_list_link;
- rtx_list_link->next = 0;
- }
- /* get vector length and allocate it */
- XVEC (return_rtx, i) = (list_counter
- ? rtvec_alloc (list_counter) : NULL_RTVEC);
- if (list_counter > 0)
- {
- next_rtx = list_rtx;
- for (j = 0; j < list_counter; j++,
- next_rtx = next_rtx->next)
- XVECEXP (return_rtx, i, j) = next_rtx->value;
- }
- /* close bracket gotten */
- }
- break;
-
- case 'S':
- /* 'S' is an optional string: if a closeparen follows,
- just store NULL for this element. */
- c = read_skip_spaces (infile);
- ungetc (c, infile);
- if (c == ')')
- {
- XSTR (return_rtx, i) = 0;
- break;
- }
-
- case 's':
- {
- int saw_paren = 0;
- register char *stringbuf;
-
- c = read_skip_spaces (infile);
- if (c == '(')
- {
- saw_paren = 1;
- c = read_skip_spaces (infile);
- }
- if (c != '"')
- dump_and_abort ('"', c, infile);
-
- while (1)
- {
- c = getc (infile); /* Read the string */
- if (c == '\\')
- {
- c = getc (infile); /* Read the string */
- /* \; makes stuff for a C string constant containing
- newline and tab. */
- if (c == ';')
- {
- obstack_grow (rtl_obstack, "\\n\\t", 4);
- continue;
- }
- }
- else if (c == '"')
- break;
-
- obstack_1grow (rtl_obstack, c);
- }
-
- obstack_1grow (rtl_obstack, 0);
- stringbuf = (char *) obstack_finish (rtl_obstack);
-
- if (saw_paren)
- {
- c = read_skip_spaces (infile);
- if (c != ')')
- dump_and_abort (')', c, infile);
- }
- XSTR (return_rtx, i) = stringbuf;
- }
- break;
-
- case 'w':
- read_name (tmp_char, infile);
-#if HOST_BITS_PER_WIDE_INT == HOST_BITS_PER_INT
- tmp_wide = atoi (tmp_char);
-#else
-#if HOST_BITS_PER_WIDE_INT == HOST_BITS_PER_LONG
- tmp_wide = atol (tmp_char);
-#else
- /* Prefer atoll over atoq, since the former is in the ISO C9X draft.
- But prefer not to use our hand-rolled function above either. */
-#if defined(HAVE_ATOLL) || !defined(HAVE_ATOQ)
- tmp_wide = atoll (tmp_char);
-#else
- tmp_wide = atoq (tmp_char);
-#endif
-#endif
-#endif
- XWINT (return_rtx, i) = tmp_wide;
- break;
-
- case 'i':
- case 'n':
- read_name (tmp_char, infile);
- tmp_int = atoi (tmp_char);
- XINT (return_rtx, i) = tmp_int;
- break;
-
- default:
- fprintf (stderr,
- "switch format wrong in rtl.read_rtx(). format was: %c.\n",
- format_ptr[-1]);
- fprintf (stderr, "\tfile position: %ld\n", ftell (infile));
- abort ();
- }
-
- c = read_skip_spaces (infile);
- if (c != ')')
- dump_and_abort (')', c, infile);
-
- return return_rtx;
+ internal_error
+ ("RTL check: expected code `%s' or `%s', have `%s' in %s, at %s:%d",
+ GET_RTX_NAME (code1), GET_RTX_NAME (code2), GET_RTX_NAME (GET_CODE (r)),
+ func, trim_filename (file), line);
}
-/* These are utility functions used by fatal-error functions all over the
- code. rtl.c happens to be linked by all the programs that need them,
- so these are here. In the future we want to break out all error handling
- to its own module. */
-
-/* Given a partial pathname as input, return another pathname that
- shares no directory elements with the pathname of __FILE__. This
- is used by fancy_abort() to print `Internal compiler error in expr.c'
- instead of `Internal compiler error in ../../egcs/gcc/expr.c'. */
-static const char *
-trim_filename (name)
- const char *name;
+/* XXX Maybe print the vector? */
+void
+rtvec_check_failed_bounds (r, n, file, line, func)
+ rtvec r;
+ int n;
+ const char *file;
+ int line;
+ const char *func;
{
- static const char this_file[] = __FILE__;
- const char *p = name, *q = this_file;
-
- while (*p == *q && *p != 0 && *q != 0) p++, q++;
- while (p > name && p[-1] != DIR_SEPARATOR
-#ifdef DIR_SEPARATOR_2
- && p[-1] != DIR_SEPARATOR_2
-#endif
- )
- p--;
-
- return p;
+ internal_error
+ ("RTL check: access of elt %d of vector with last elt %d in %s, at %s:%d",
+ n, GET_NUM_ELEM (r) - 1, func, trim_filename (file), line);
}
+#endif /* ENABLE_RTL_CHECKING */
-/* Report an internal compiler error in a friendly manner and without
- dumping core. There are two versions because __FUNCTION__ isn't
- available except in gcc 2.7 and later. */
-
-extern void fatal PVPROTO ((const char *, ...))
- ATTRIBUTE_PRINTF_1 ATTRIBUTE_NORETURN;
-
+#if defined ENABLE_RTL_FLAG_CHECKING
void
-fancy_abort (file, line, function)
- const char *file;
- int line;
- const char *function;
+rtl_check_failed_flag (name, r, file, line, func)
+ const char *name;
+ rtx r;
+ const char *file;
+ int line;
+ const char *func;
{
- if (function == NULL)
- function = "?";
- fatal (
-"Internal compiler error in `%s', at %s:%d\n\
-Please submit a full bug report.\n\
-See <URL:http://www.gnu.org/software/gcc/faq.html#bugreport> \
-for instructions.",
- function, trim_filename (file), line);
+ internal_error
+ ("RTL flag check: %s used with unexpected rtx code `%s' in %s, at %s:%d",
+ name, GET_RTX_NAME (GET_CODE (r)), func, trim_filename (file), line);
}
+#endif /* ENABLE_RTL_FLAG_CHECKING */
OSDN Git Service
