/* Move registers around to reduce number of move instructions needed.
- Copyright (C) 1987, 88, 89, 92-97, 1998 Free Software Foundation, Inc.
+ Copyright (C) 1987, 1988, 1989, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
+ 1999, 2000 Free Software Foundation, Inc.
This file is part of GNU CC.
You should have received a copy of the GNU General Public License
along with GNU CC; see the file COPYING. If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */
+the Free Software Foundation, 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA. */
/* This module looks for cases where matching constraints would force
instruction to avoid the move instruction. */
#include "config.h"
-#ifdef __STDC__
-#include <stdarg.h>
-#else
-#include <varargs.h>
-#endif
-
-/* stdio.h must precede rtl.h for FFS. */
#include "system.h"
-
-#include "rtl.h"
+#include "rtl.h" /* stdio.h must precede rtl.h for FFS. */
+#include "tm_p.h"
#include "insn-config.h"
#include "recog.h"
#include "output.h"
-#include "reload.h"
#include "regs.h"
#include "hard-reg-set.h"
#include "flags.h"
+#include "function.h"
#include "expr.h"
#include "insn-flags.h"
#include "basic-block.h"
#include "toplev.h"
-static int optimize_reg_copy_1 PROTO((rtx, rtx, rtx));
-static void optimize_reg_copy_2 PROTO((rtx, rtx, rtx));
-static void optimize_reg_copy_3 PROTO((rtx, rtx, rtx));
-static rtx gen_add3_insn PROTO((rtx, rtx, rtx));
-static void copy_src_to_dest PROTO((rtx, rtx, rtx, int));
+static int perhaps_ends_bb_p PARAMS ((rtx));
+static int optimize_reg_copy_1 PARAMS ((rtx, rtx, rtx));
+static void optimize_reg_copy_2 PARAMS ((rtx, rtx, rtx));
+static void optimize_reg_copy_3 PARAMS ((rtx, rtx, rtx));
+static rtx gen_add3_insn PARAMS ((rtx, rtx, rtx));
+static void copy_src_to_dest PARAMS ((rtx, rtx, rtx, int));
static int *regmove_bb_head;
struct match {
int early_clobber[MAX_RECOG_OPERANDS];
};
-#ifdef AUTO_INC_DEC
-static int try_auto_increment PROTO((rtx, rtx, rtx, rtx, HOST_WIDE_INT, int));
-#endif
-static int find_matches PROTO((rtx, struct match *));
-static int fixup_match_1 PROTO((rtx, rtx, rtx, rtx, rtx, int, int, int, FILE *))
+static rtx discover_flags_reg PARAMS ((void));
+static void mark_flags_life_zones PARAMS ((rtx));
+static void flags_set_1 PARAMS ((rtx, rtx, void *));
+
+static int try_auto_increment PARAMS ((rtx, rtx, rtx, rtx, HOST_WIDE_INT, int));
+static int find_matches PARAMS ((rtx, struct match *));
+static int fixup_match_1 PARAMS ((rtx, rtx, rtx, rtx, rtx, int, int, int, FILE *))
;
-static int reg_is_remote_constant_p PROTO((rtx, rtx, rtx));
-static int stable_but_for_p PROTO((rtx, rtx, rtx));
-static int loop_depth;
+static int reg_is_remote_constant_p PARAMS ((rtx, rtx, rtx));
+static int stable_and_no_regs_but_for_p PARAMS ((rtx, rtx, rtx));
+static int regclass_compatible_p PARAMS ((int, int));
+static int replacement_quality PARAMS ((rtx));
+static int fixup_match_2 PARAMS ((rtx, rtx, rtx, rtx, FILE *));
+
+/* Return non-zero if registers with CLASS1 and CLASS2 can be merged without
+ causing too much register allocation problems. */
+static int
+regclass_compatible_p (class0, class1)
+ int class0, class1;
+{
+ return (class0 == class1
+ || (reg_class_subset_p (class0, class1)
+ && ! CLASS_LIKELY_SPILLED_P (class0))
+ || (reg_class_subset_p (class1, class0)
+ && ! CLASS_LIKELY_SPILLED_P (class1)));
+}
/* Generate and return an insn body to add r1 and c,
storing the result in r0. */
int icode = (int) add_optab->handlers[(int) GET_MODE (r0)].insn_code;
if (icode == CODE_FOR_nothing
- || ! (*insn_operand_predicate[icode][0]) (r0, insn_operand_mode[icode][0])
- || ! (*insn_operand_predicate[icode][1]) (r1, insn_operand_mode[icode][1])
- || ! (*insn_operand_predicate[icode][2]) (c, insn_operand_mode[icode][2]))
+ || ! ((*insn_data[icode].operand[0].predicate)
+ (r0, insn_data[icode].operand[0].mode))
+ || ! ((*insn_data[icode].operand[1].predicate)
+ (r1, insn_data[icode].operand[1].mode))
+ || ! ((*insn_data[icode].operand[2].predicate)
+ (c, insn_data[icode].operand[2].mode)))
return NULL_RTX;
return (GEN_FCN (icode) (r0, r1, c));
}
-#ifdef AUTO_INC_DEC
/* INC_INSN is an instruction that adds INCREMENT to REG.
Try to fold INC_INSN as a post/pre in/decrement into INSN.
{
int size = GET_MODE_SIZE (GET_MODE (use));
if (0
-#ifdef HAVE_POST_INCREMENT
- || (pre == 0 && (inc_code = POST_INC, increment == size))
-#endif
-#ifdef HAVE_PRE_INCREMENT
- || (pre == 1 && (inc_code = PRE_INC, increment == size))
-#endif
-#ifdef HAVE_POST_DECREMENT
- || (pre == 0 && (inc_code = POST_DEC, increment == -size))
-#endif
-#ifdef HAVE_PRE_DECREMENT
- || (pre == 1 && (inc_code = PRE_DEC, increment == -size))
-#endif
+ || (HAVE_POST_INCREMENT
+ && pre == 0 && (inc_code = POST_INC, increment == size))
+ || (HAVE_PRE_INCREMENT
+ && pre == 1 && (inc_code = PRE_INC, increment == size))
+ || (HAVE_POST_DECREMENT
+ && pre == 0 && (inc_code = POST_DEC, increment == -size))
+ || (HAVE_PRE_DECREMENT
+ && pre == 1 && (inc_code = PRE_DEC, increment == -size))
)
{
if (inc_insn_set)
}
return 0;
}
-#endif /* AUTO_INC_DEC */
+\f
+/* Determine if the pattern generated by add_optab has a clobber,
+ such as might be issued for a flags hard register. To make the
+ code elsewhere simpler, we handle cc0 in this same framework.
+
+ Return the register if one was discovered. Return NULL_RTX if
+ if no flags were found. Return pc_rtx if we got confused. */
+
+static rtx
+discover_flags_reg ()
+{
+ rtx tmp;
+ tmp = gen_rtx_REG (word_mode, 10000);
+ tmp = gen_add3_insn (tmp, tmp, GEN_INT (2));
+
+ /* If we get something that isn't a simple set, or a
+ [(set ..) (clobber ..)], this whole function will go wrong. */
+ if (GET_CODE (tmp) == SET)
+ return NULL_RTX;
+ else if (GET_CODE (tmp) == PARALLEL)
+ {
+ int found;
+
+ if (XVECLEN (tmp, 0) != 2)
+ return pc_rtx;
+ tmp = XVECEXP (tmp, 0, 1);
+ if (GET_CODE (tmp) != CLOBBER)
+ return pc_rtx;
+ tmp = XEXP (tmp, 0);
+
+ /* Don't do anything foolish if the md wanted to clobber a
+ scratch or something. We only care about hard regs.
+ Moreover we don't like the notion of subregs of hard regs. */
+ if (GET_CODE (tmp) == SUBREG
+ && GET_CODE (SUBREG_REG (tmp)) == REG
+ && REGNO (SUBREG_REG (tmp)) < FIRST_PSEUDO_REGISTER)
+ return pc_rtx;
+ found = (GET_CODE (tmp) == REG && REGNO (tmp) < FIRST_PSEUDO_REGISTER);
+
+ return (found ? tmp : NULL_RTX);
+ }
+
+ return pc_rtx;
+}
+
+/* It is a tedious task identifying when the flags register is live and
+ when it is safe to optimize. Since we process the instruction stream
+ multiple times, locate and record these live zones by marking the
+ mode of the instructions --
+
+ QImode is used on the instruction at which the flags becomes live.
+
+ HImode is used within the range (exclusive) that the flags are
+ live. Thus the user of the flags is not marked.
+
+ All other instructions are cleared to VOIDmode. */
+
+/* Used to communicate with flags_set_1. */
+static rtx flags_set_1_rtx;
+static int flags_set_1_set;
+
+static void
+mark_flags_life_zones (flags)
+ rtx flags;
+{
+ int flags_regno;
+ int flags_nregs;
+ int block;
+
+#ifdef HAVE_cc0
+ /* If we found a flags register on a cc0 host, bail. */
+ if (flags == NULL_RTX)
+ flags = cc0_rtx;
+ else if (flags != cc0_rtx)
+ flags = pc_rtx;
+#endif
+
+ /* Simple cases first: if no flags, clear all modes. If confusing,
+ mark the entire function as being in a flags shadow. */
+ if (flags == NULL_RTX || flags == pc_rtx)
+ {
+ enum machine_mode mode = (flags ? HImode : VOIDmode);
+ rtx insn;
+ for (insn = get_insns(); insn; insn = NEXT_INSN (insn))
+ PUT_MODE (insn, mode);
+ return;
+ }
+
+#ifdef HAVE_cc0
+ flags_regno = -1;
+ flags_nregs = 1;
+#else
+ flags_regno = REGNO (flags);
+ flags_nregs = HARD_REGNO_NREGS (flags_regno, GET_MODE (flags));
+#endif
+ flags_set_1_rtx = flags;
+
+ /* Process each basic block. */
+ for (block = n_basic_blocks - 1; block >= 0; block--)
+ {
+ rtx insn, end;
+ int live;
+
+ insn = BLOCK_HEAD (block);
+ end = BLOCK_END (block);
+
+ /* Look out for the (unlikely) case of flags being live across
+ basic block boundaries. */
+ live = 0;
+#ifndef HAVE_cc0
+ {
+ int i;
+ for (i = 0; i < flags_nregs; ++i)
+ live |= REGNO_REG_SET_P (BASIC_BLOCK (block)->global_live_at_start,
+ flags_regno + i);
+ }
+#endif
+
+ while (1)
+ {
+ /* Process liveness in reverse order of importance --
+ alive, death, birth. This lets more important info
+ overwrite the mode of lesser info. */
+
+ if (INSN_P (insn))
+ {
+#ifdef HAVE_cc0
+ /* In the cc0 case, death is not marked in reg notes,
+ but is instead the mere use of cc0 when it is alive. */
+ if (live && reg_mentioned_p (cc0_rtx, PATTERN (insn)))
+ live = 0;
+#else
+ /* In the hard reg case, we watch death notes. */
+ if (live && find_regno_note (insn, REG_DEAD, flags_regno))
+ live = 0;
+#endif
+ PUT_MODE (insn, (live ? HImode : VOIDmode));
+
+ /* In either case, birth is denoted simply by it's presence
+ as the destination of a set. */
+ flags_set_1_set = 0;
+ note_stores (PATTERN (insn), flags_set_1, NULL);
+ if (flags_set_1_set)
+ {
+ live = 1;
+ PUT_MODE (insn, QImode);
+ }
+ }
+ else
+ PUT_MODE (insn, (live ? HImode : VOIDmode));
+
+ if (insn == end)
+ break;
+ insn = NEXT_INSN (insn);
+ }
+ }
+}
+
+/* A subroutine of mark_flags_life_zones, called through note_stores. */
+static void
+flags_set_1 (x, pat, data)
+ rtx x, pat;
+ void *data ATTRIBUTE_UNUSED;
+{
+ if (GET_CODE (pat) == SET
+ && reg_overlap_mentioned_p (x, flags_set_1_rtx))
+ flags_set_1_set = 1;
+}
+\f
static int *regno_src_regno;
/* Indicate how good a choice REG (which appears as a source) is to replace
the choice. The main objective is to avoid using a register that is
a candidate for tying to a hard register, since the output might in
turn be a candidate to be tied to a different hard register. */
-int
+static int
replacement_quality(reg)
rtx reg;
{
when the registers get tied. */
return 2;
}
+\f
+/* Return 1 if INSN might end a basic block. */
+
+static int perhaps_ends_bb_p (insn)
+ rtx insn;
+{
+ switch (GET_CODE (insn))
+ {
+ case CODE_LABEL:
+ case JUMP_INSN:
+ /* These always end a basic block. */
+ return 1;
+
+ case CALL_INSN:
+ /* A CALL_INSN might be the last insn of a basic block, if it is inside
+ an EH region or if there are nonlocal gotos. Note that this test is
+ very conservative. */
+ return flag_exceptions || nonlocal_goto_handler_labels;
+ default:
+ /* All others never end a basic block. */
+ return 0;
+ }
+}
+\f
/* INSN is a copy from SRC to DEST, both registers, and SRC does not die
in INSN.
for (p = NEXT_INSN (insn); p; p = NEXT_INSN (p))
{
- if (GET_CODE (p) == CODE_LABEL || GET_CODE (p) == JUMP_INSN
- || (GET_CODE (p) == NOTE
- && (NOTE_LINE_NUMBER (p) == NOTE_INSN_LOOP_BEG
- || NOTE_LINE_NUMBER (p) == NOTE_INSN_LOOP_END)))
- break;
-
/* ??? We can't scan past the end of a basic block without updating
- the register lifetime info (REG_DEAD/basic_block_live_at_start).
- A CALL_INSN might be the last insn of a basic block, if it is inside
- an EH region. There is no easy way to tell, so we just always break
- when we see a CALL_INSN if flag_exceptions is nonzero. */
- if (flag_exceptions && GET_CODE (p) == CALL_INSN)
+ the register lifetime info (REG_DEAD/basic_block_live_at_start). */
+ if (perhaps_ends_bb_p (p))
break;
-
- if (GET_RTX_CLASS (GET_CODE (p)) != 'i')
+ else if (! INSN_P (p))
continue;
if (reg_set_p (src, p) || reg_set_p (dest, p)
&& GET_MODE (XEXP (note, 0)) == GET_MODE (src))
{
int failed = 0;
- int length = 0;
int d_length = 0;
- int n_calls = 0;
+ int s_length = 0;
int d_n_calls = 0;
+ int s_n_calls = 0;
/* We can do the optimization. Scan forward from INSN again,
replacing regs as we go. Set FAILED if a replacement can't
&& (sregno >= FIRST_PSEUDO_REGISTER
|| ! reg_overlap_mentioned_p (src,
PATTERN (q))))
- {
- /* We assume that a register is used exactly once per
- insn in the updates below. If this is not correct,
- no great harm is done. */
- if (sregno >= FIRST_PSEUDO_REGISTER)
- REG_N_REFS (sregno) -= loop_depth;
- if (dregno >= FIRST_PSEUDO_REGISTER)
- REG_N_REFS (dregno) += loop_depth;
- }
+ ;
else
{
validate_replace_rtx (dest, src, q);
}
}
- /* Count the insns and CALL_INSNs passed. If we passed the
- death note of DEST, show increased live length. */
- length++;
+ /* For SREGNO, count the total number of insns scanned.
+ For DREGNO, count the total number of insns scanned after
+ passing the death note for DREGNO. */
+ s_length++;
if (dest_death)
d_length++;
as a call that has been crossed. Otherwise, count it. */
if (q != p && GET_CODE (q) == CALL_INSN)
{
- n_calls++;
+ /* Similarly, total calls for SREGNO, total calls beyond
+ the death note for DREGNO. */
+ s_n_calls++;
if (dest_death)
d_n_calls++;
}
if (! failed)
{
+ /* These counters need to be updated if and only if we are
+ going to move the REG_DEAD note. */
if (sregno >= FIRST_PSEUDO_REGISTER)
{
if (REG_LIVE_LENGTH (sregno) >= 0)
{
- REG_LIVE_LENGTH (sregno) -= length;
+ REG_LIVE_LENGTH (sregno) -= s_length;
/* REG_LIVE_LENGTH is only an approximation after
combine if sched is not run, so make sure that we
still have a reasonable value. */
REG_LIVE_LENGTH (sregno) = 2;
}
- REG_N_CALLS_CROSSED (sregno) -= n_calls;
- }
-
- if (dregno >= FIRST_PSEUDO_REGISTER)
- {
- if (REG_LIVE_LENGTH (dregno) >= 0)
- REG_LIVE_LENGTH (dregno) += d_length;
-
- REG_N_CALLS_CROSSED (dregno) += d_n_calls;
+ REG_N_CALLS_CROSSED (sregno) -= s_n_calls;
}
/* Move death note of SRC from P to INSN. */
REG_NOTES (insn) = note;
}
+ /* DEST is also dead if INSN has a REG_UNUSED note for DEST. */
+ if (! dest_death
+ && (dest_death = find_regno_note (insn, REG_UNUSED, dregno)))
+ {
+ PUT_REG_NOTE_KIND (dest_death, REG_DEAD);
+ remove_note (insn, dest_death);
+ }
+
/* Put death note of DEST on P if we saw it die. */
if (dest_death)
{
XEXP (dest_death, 1) = REG_NOTES (p);
REG_NOTES (p) = dest_death;
+
+ if (dregno >= FIRST_PSEUDO_REGISTER)
+ {
+ /* If and only if we are moving the death note for DREGNO,
+ then we need to update its counters. */
+ if (REG_LIVE_LENGTH (dregno) >= 0)
+ REG_LIVE_LENGTH (dregno) += d_length;
+ REG_N_CALLS_CROSSED (dregno) += d_n_calls;
+ }
}
return ! failed;
for (p = NEXT_INSN (insn); p; p = NEXT_INSN (p))
{
- if (GET_CODE (p) == CODE_LABEL || GET_CODE (p) == JUMP_INSN
- || (GET_CODE (p) == NOTE
- && (NOTE_LINE_NUMBER (p) == NOTE_INSN_LOOP_BEG
- || NOTE_LINE_NUMBER (p) == NOTE_INSN_LOOP_END)))
- break;
-
/* ??? We can't scan past the end of a basic block without updating
- the register lifetime info (REG_DEAD/basic_block_live_at_start).
- A CALL_INSN might be the last insn of a basic block, if it is inside
- an EH region. There is no easy way to tell, so we just always break
- when we see a CALL_INSN if flag_exceptions is nonzero. */
- if (flag_exceptions && GET_CODE (p) == CALL_INSN)
+ the register lifetime info (REG_DEAD/basic_block_live_at_start). */
+ if (perhaps_ends_bb_p (p))
break;
-
- if (GET_RTX_CLASS (GET_CODE (p)) != 'i')
+ else if (! INSN_P (p))
continue;
set = single_set (p);
/* Set to stop at next insn. */
for (q = insn; q != NEXT_INSN (p); q = NEXT_INSN (q))
- if (GET_RTX_CLASS (GET_CODE (q)) == 'i')
+ if (INSN_P (q))
{
if (reg_mentioned_p (dest, PATTERN (q)))
- {
- PATTERN (q) = replace_rtx (PATTERN (q), dest, src);
-
- /* We assume that a register is used exactly once per
- insn in the updates below. If this is not correct,
- no great harm is done. */
- REG_N_REFS (dregno) -= loop_depth;
- REG_N_REFS (sregno) += loop_depth;
- }
+ PATTERN (q) = replace_rtx (PATTERN (q), dest, src);
if (GET_CODE (q) == CALL_INSN)
|| ! find_reg_note (insn, REG_DEAD, src_reg)
|| REG_N_SETS (src_no) != 1)
return;
- for (p = PREV_INSN (insn); ! reg_set_p (src_reg, p); p = PREV_INSN (p))
- {
- if (GET_CODE (p) == CODE_LABEL || GET_CODE (p) == JUMP_INSN
- || (GET_CODE (p) == NOTE
- && (NOTE_LINE_NUMBER (p) == NOTE_INSN_LOOP_BEG
- || NOTE_LINE_NUMBER (p) == NOTE_INSN_LOOP_END)))
- return;
+ for (p = PREV_INSN (insn); p && ! reg_set_p (src_reg, p); p = PREV_INSN (p))
+ /* ??? We can't scan past the end of a basic block without updating
+ the register lifetime info (REG_DEAD/basic_block_live_at_start). */
+ if (perhaps_ends_bb_p (p))
+ break;
+
+ if (! p)
+ return;
- /* ??? We can't scan past the end of a basic block without updating
- the register lifetime info (REG_DEAD/basic_block_live_at_start).
- A CALL_INSN might be the last insn of a basic block, if it is inside
- an EH region. There is no easy way to tell, so we just always break
- when we see a CALL_INSN if flag_exceptions is nonzero. */
- if (flag_exceptions && GET_CODE (p) == CALL_INSN)
- return;
-
- if (GET_RTX_CLASS (GET_CODE (p)) != 'i')
- continue;
- }
if (! (set = single_set (p))
|| GET_CODE (SET_SRC (set)) != MEM
|| SET_DEST (set) != src_reg)
return;
+
+ /* Be conserative: although this optimization is also valid for
+ volatile memory references, that could cause trouble in later passes. */
+ if (MEM_VOLATILE_P (SET_SRC (set)))
+ return;
+
+ /* Do not use a SUBREG to truncate from one mode to another if truncation
+ is not a nop. */
+ if (GET_MODE_BITSIZE (GET_MODE (src_reg)) <= GET_MODE_BITSIZE (GET_MODE (src))
+ && !TRULY_NOOP_TRUNCATION (GET_MODE_BITSIZE (GET_MODE (src)),
+ GET_MODE_BITSIZE (GET_MODE (src_reg))))
+ return;
+
old_mode = GET_MODE (src_reg);
PUT_MODE (src_reg, GET_MODE (src));
XEXP (src, 0) = SET_SRC (set);
- if (! validate_change (p, &SET_SRC (set), src, 0))
- {
- PUT_MODE (src_reg, old_mode);
- XEXP (src, 0) = src_reg;
- return;
- }
+
+ /* Include this change in the group so that it's easily undone if
+ one of the changes in the group is invalid. */
+ validate_change (p, &SET_SRC (set), src, 1);
+
+ /* Now walk forward making additional replacements. We want to be able
+ to undo all the changes if a later substitution fails. */
subreg = gen_rtx_SUBREG (old_mode, src_reg, 0);
while (p = NEXT_INSN (p), p != insn)
{
- if (GET_RTX_CLASS (GET_CODE (p)) != 'i')
+ if (! INSN_P (p))
continue;
- validate_replace_rtx (src_reg, subreg, p);
+
+ /* Make a tenative change. */
+ validate_replace_rtx_group (src_reg, subreg, p);
+ }
+
+ validate_replace_rtx_group (src, src_reg, insn);
+
+ /* Now see if all the changes are valid. */
+ if (! apply_change_group ())
+ {
+ /* One or more changes were no good. Back out everything. */
+ PUT_MODE (src_reg, old_mode);
+ XEXP (src, 0) = src_reg;
}
- validate_replace_rtx (src, src_reg, insn);
}
\f
instead moving the value to dest directly before the operation. */
static void
-copy_src_to_dest (insn, src, dest, loop_depth)
+copy_src_to_dest (insn, src, dest, old_max_uid)
rtx insn;
rtx src;
rtx dest;
- int loop_depth;
+ int old_max_uid;
{
rtx seq;
rtx link;
if (GET_CODE (src) == REG
&& REG_LIVE_LENGTH (REGNO (src)) > 0
&& GET_CODE (dest) == REG
+ && !RTX_UNCHANGING_P (dest)
&& REG_LIVE_LENGTH (REGNO (dest)) > 0
&& (set = single_set (insn)) != NULL_RTX
&& !reg_mentioned_p (dest, SET_SRC (set))
- && validate_replace_rtx (src, dest, insn))
+ && GET_MODE (src) == GET_MODE (dest))
{
+ int old_num_regs = reg_rtx_no;
+
/* Generate the src->dest move. */
start_sequence ();
emit_move_insn (dest, src);
seq = gen_sequence ();
end_sequence ();
+ /* If this sequence uses new registers, we may not use it. */
+ if (old_num_regs != reg_rtx_no
+ || ! validate_replace_rtx (src, dest, insn))
+ {
+ /* We have to restore reg_rtx_no to its old value, lest
+ recompute_reg_usage will try to compute the usage of the
+ new regs, yet reg_n_info is not valid for them. */
+ reg_rtx_no = old_num_regs;
+ return;
+ }
emit_insn_before (seq, insn);
move_insn = PREV_INSN (insn);
p_move_notes = ®_NOTES (move_insn);
/* Is the insn the head of a basic block? If so extend it */
insn_uid = INSN_UID (insn);
move_uid = INSN_UID (move_insn);
- bb = regmove_bb_head[insn_uid];
- if (bb >= 0)
+ if (insn_uid < old_max_uid)
{
- basic_block_head[bb] = move_insn;
- regmove_bb_head[insn_uid] = -1;
+ bb = regmove_bb_head[insn_uid];
+ if (bb >= 0)
+ {
+ BLOCK_HEAD (bb) = move_insn;
+ regmove_bb_head[insn_uid] = -1;
+ }
}
/* Update the various register tables. */
dest_regno = REGNO (dest);
- REG_N_SETS (dest_regno) += loop_depth;
- REG_N_REFS (dest_regno) += loop_depth;
+ REG_N_SETS (dest_regno) ++;
REG_LIVE_LENGTH (dest_regno)++;
if (REGNO_FIRST_UID (dest_regno) == insn_uid)
REGNO_FIRST_UID (dest_regno) = move_uid;
{
rtx s;
- if (GET_RTX_CLASS (GET_CODE (p)) != 'i')
+ if (! INSN_P (p))
continue;
s = single_set (p);
if (s != 0
/* cse disrupts preincrement / postdecrement squences when it finds a
hard register as ultimate source, like the frame pointer. */
-int
+static int
fixup_match_2 (insn, dst, src, offset, regmove_dump_file)
rtx insn, dst, src, offset;
FILE *regmove_dump_file;
{
rtx pset;
- if (GET_CODE (p) == CODE_LABEL
- || GET_CODE (p) == JUMP_INSN
- || (GET_CODE (p) == NOTE
- && (NOTE_LINE_NUMBER (p) == NOTE_INSN_LOOP_BEG
- || NOTE_LINE_NUMBER (p) == NOTE_INSN_LOOP_END)))
- break;
-
/* ??? We can't scan past the end of a basic block without updating
- the register lifetime info (REG_DEAD/basic_block_live_at_start).
- A CALL_INSN might be the last insn of a basic block, if it is inside
- an EH region. There is no easy way to tell, so we just always break
- when we see a CALL_INSN if flag_exceptions is nonzero. */
- if (flag_exceptions && GET_CODE (p) == CALL_INSN)
+ the register lifetime info (REG_DEAD/basic_block_live_at_start). */
+ if (perhaps_ends_bb_p (p))
break;
-
- if (GET_RTX_CLASS (GET_CODE (p)) != 'i')
+ else if (! INSN_P (p))
continue;
if (find_regno_note (p, REG_DEAD, REGNO (dst)))
REG_N_CALLS_CROSSED (REGNO (dst)) += num_calls;
}
- REG_N_REFS (REGNO (dst)) += loop_depth;
- REG_N_REFS (REGNO (src)) -= loop_depth;
-
if (regmove_dump_file)
fprintf (regmove_dump_file,
"Fixed operand of insn %d.\n",
for (p = PREV_INSN (insn); p; p = PREV_INSN (p))
{
if (GET_CODE (p) == CODE_LABEL
- || GET_CODE (p) == JUMP_INSN
- || (GET_CODE (p) == NOTE
- && (NOTE_LINE_NUMBER (p) == NOTE_INSN_LOOP_BEG
- || NOTE_LINE_NUMBER (p) == NOTE_INSN_LOOP_END)))
+ || GET_CODE (p) == JUMP_INSN)
break;
+ if (! INSN_P (p))
+ continue;
if (reg_overlap_mentioned_p (dst, PATTERN (p)))
{
if (try_auto_increment (p, insn, 0, dst, newconst, 0))
for (p = NEXT_INSN (insn); p; p = NEXT_INSN (p))
{
if (GET_CODE (p) == CODE_LABEL
- || GET_CODE (p) == JUMP_INSN
- || (GET_CODE (p) == NOTE
- && (NOTE_LINE_NUMBER (p) == NOTE_INSN_LOOP_BEG
- || NOTE_LINE_NUMBER (p) == NOTE_INSN_LOOP_END)))
+ || GET_CODE (p) == JUMP_INSN)
break;
+ if (! INSN_P (p))
+ continue;
if (reg_overlap_mentioned_p (dst, PATTERN (p)))
{
try_auto_increment (p, insn, 0, dst, newconst, 1);
int nregs;
FILE *regmove_dump_file;
{
+ int old_max_uid = get_max_uid ();
rtx insn;
struct match match;
int pass;
- int maxregnum = max_reg_num (), i;
+ int i;
rtx copy_src, copy_dst;
- regno_src_regno = (int *)alloca (sizeof *regno_src_regno * maxregnum);
- for (i = maxregnum; --i >= 0; ) regno_src_regno[i] = -1;
+ /* Find out where a potential flags register is live, and so that we
+ can supress some optimizations in those zones. */
+ mark_flags_life_zones (discover_flags_reg ());
+
+ regno_src_regno = (int *) xmalloc (sizeof *regno_src_regno * nregs);
+ for (i = nregs; --i >= 0; ) regno_src_regno[i] = -1;
- regmove_bb_head = (int *)alloca (sizeof (int) * (get_max_uid () + 1));
- for (i = get_max_uid (); --i >= 0; ) regmove_bb_head[i] = -1;
+ regmove_bb_head = (int *) xmalloc (sizeof (int) * (old_max_uid + 1));
+ for (i = old_max_uid; i >= 0; i--) regmove_bb_head[i] = -1;
for (i = 0; i < n_basic_blocks; i++)
- regmove_bb_head[INSN_UID (basic_block_head[i])] = i;
+ regmove_bb_head[INSN_UID (BLOCK_HEAD (i))] = i;
/* A forward/backward pass. Replace output operands with input operands. */
- loop_depth = 1;
-
for (pass = 0; pass <= 2; pass++)
{
if (! flag_regmove && pass >= flag_expensive_optimizations)
- return;
+ goto done;
if (regmove_dump_file)
fprintf (regmove_dump_file, "Starting %s pass...\n",
insn = pass ? PREV_INSN (insn) : NEXT_INSN (insn))
{
rtx set;
- int insn_code_number;
- int operand_number, match_number;
-
- if (GET_CODE (insn) == NOTE)
- {
- if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_BEG)
- loop_depth++;
- else if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_END)
- loop_depth--;
- }
+ int op_no, match_no;
set = single_set (insn);
if (! set)
}
}
}
-#ifdef REGISTER_CONSTRAINTS
- insn_code_number
- = find_matches (insn, &match);
+ if (! flag_regmove)
+ continue;
- if (insn_code_number < 0)
+ if (! find_matches (insn, &match))
continue;
/* Now scan through the operands looking for a source operand
If it dies there, then replace the dest in both operands with
the source operand. */
- for (operand_number = 0;
- operand_number < insn_n_operands[insn_code_number];
- operand_number++)
+ for (op_no = 0; op_no < recog_data.n_operands; op_no++)
{
rtx src, dst, src_subreg;
enum reg_class src_class, dst_class;
- match_number = match.with[operand_number];
+ match_no = match.with[op_no];
/* Nothing to do if the two operands aren't supposed to match. */
- if (match_number < 0)
+ if (match_no < 0)
continue;
- src = recog_operand[operand_number];
- dst = recog_operand[match_number];
+ src = recog_data.operand[op_no];
+ dst = recog_data.operand[match_no];
if (GET_CODE (src) != REG)
continue;
if (REGNO (src) < FIRST_PSEUDO_REGISTER)
{
- if (match.commutative[operand_number] < operand_number)
+ if (match.commutative[op_no] < op_no)
regno_src_regno[REGNO (dst)] = REGNO (src);
continue;
}
if (REG_LIVE_LENGTH (REGNO (src)) < 0)
continue;
- /* operand_number/src must be a read-only operand, and
+ /* op_no/src must be a read-only operand, and
match_operand/dst must be a write-only operand. */
- if (match.use[operand_number] != READ
- || match.use[match_number] != WRITE)
+ if (match.use[op_no] != READ
+ || match.use[match_no] != WRITE)
continue;
- if (match.early_clobber[match_number]
- && count_occurrences (PATTERN (insn), src) > 1)
+ if (match.early_clobber[match_no]
+ && count_occurrences (PATTERN (insn), src, 0) > 1)
continue;
/* Make sure match_operand is the destination. */
- if (recog_operand[match_number] != SET_DEST (set))
+ if (recog_data.operand[match_no] != SET_DEST (set))
continue;
- /* If the operands already match, then there is nothing to do. */
- /* But in the commutative case, we might find a better match. */
- if (operands_match_p (src, dst)
- || (match.commutative[operand_number] >= 0
- && operands_match_p (recog_operand[match.commutative
- [operand_number]], dst)
- && (replacement_quality (recog_operand[match.commutative
- [operand_number]])
- >= replacement_quality (src))))
+ /* If the operands already match, then there is nothing to do. */
+ if (operands_match_p (src, dst))
continue;
+ /* But in the commutative case, we might find a better match. */
+ if (match.commutative[op_no] >= 0)
+ {
+ rtx comm = recog_data.operand[match.commutative[op_no]];
+ if (operands_match_p (comm, dst)
+ && (replacement_quality (comm)
+ >= replacement_quality (src)))
+ continue;
+ }
+
src_class = reg_preferred_class (REGNO (src));
dst_class = reg_preferred_class (REGNO (dst));
- if (src_class != dst_class
- && (! reg_class_subset_p (src_class, dst_class)
- || CLASS_LIKELY_SPILLED_P (src_class))
- && (! reg_class_subset_p (dst_class, src_class)
- || CLASS_LIKELY_SPILLED_P (dst_class)))
+ if (! regclass_compatible_p (src_class, dst_class))
continue;
if (fixup_match_1 (insn, set, src, src_subreg, dst, pass,
- operand_number, match_number,
+ op_no, match_no,
regmove_dump_file))
break;
}
if (regmove_dump_file)
fprintf (regmove_dump_file, "Starting backward pass...\n");
- loop_depth = 1;
-
for (insn = get_last_insn (); insn; insn = PREV_INSN (insn))
{
- if (GET_CODE (insn) == NOTE)
+ if (INSN_P (insn))
{
- if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_END)
- loop_depth++;
- else if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_BEG)
- loop_depth--;
- }
- if (GET_RTX_CLASS (GET_CODE (insn)) == 'i')
- {
- int insn_code_number = find_matches (insn, &match);
- int operand_number, match_number;
+ int op_no, match_no;
int success = 0;
-
- if (insn_code_number < 0)
+
+ if (! find_matches (insn, &match))
continue;
/* Now scan through the operands looking for a destination operand
copy_src = NULL_RTX;
copy_dst = NULL_RTX;
- for (operand_number = 0;
- operand_number < insn_n_operands[insn_code_number];
- operand_number++)
+ for (op_no = 0; op_no < recog_data.n_operands; op_no++)
{
rtx set, p, src, dst;
rtx src_note, dst_note;
enum reg_class src_class, dst_class;
int length;
- match_number = match.with[operand_number];
+ match_no = match.with[op_no];
/* Nothing to do if the two operands aren't supposed to match. */
- if (match_number < 0)
+ if (match_no < 0)
continue;
- dst = recog_operand[match_number];
- src = recog_operand[operand_number];
+ dst = recog_data.operand[match_no];
+ src = recog_data.operand[op_no];
if (GET_CODE (src) != REG)
continue;
|| REG_LIVE_LENGTH (REGNO (dst)) < 0)
continue;
- /* If the operands already match, then there is nothing to do. */
- if (operands_match_p (src, dst)
- || (match.commutative[operand_number] >= 0
- && operands_match_p (recog_operand[match.commutative[operand_number]], dst)))
+ /* If the operands already match, then there is nothing to do. */
+ if (operands_match_p (src, dst))
continue;
+ if (match.commutative[op_no] >= 0)
+ {
+ rtx comm = recog_data.operand[match.commutative[op_no]];
+ if (operands_match_p (comm, dst))
+ continue;
+ }
+
set = single_set (insn);
if (! set)
continue;
- /* match_number/dst must be a write-only operand, and
+ /* match_no/dst must be a write-only operand, and
operand_operand/src must be a read-only operand. */
- if (match.use[operand_number] != READ
- || match.use[match_number] != WRITE)
+ if (match.use[op_no] != READ
+ || match.use[match_no] != WRITE)
continue;
- if (match.early_clobber[match_number]
- && count_occurrences (PATTERN (insn), src) > 1)
+ if (match.early_clobber[match_no]
+ && count_occurrences (PATTERN (insn), src, 0) > 1)
continue;
- /* Make sure match_number is the destination. */
- if (recog_operand[match_number] != SET_DEST (set))
+ /* Make sure match_no is the destination. */
+ if (recog_data.operand[match_no] != SET_DEST (set))
continue;
if (REGNO (src) < FIRST_PSEUDO_REGISTER)
}
src_class = reg_preferred_class (REGNO (src));
dst_class = reg_preferred_class (REGNO (dst));
- if (src_class != dst_class
- && (! reg_class_subset_p (src_class, dst_class)
- || CLASS_LIKELY_SPILLED_P (src_class))
- && (! reg_class_subset_p (dst_class, src_class)
- || CLASS_LIKELY_SPILLED_P (dst_class)))
+ if (! regclass_compatible_p (src_class, dst_class))
{
if (!copy_src)
{
if (regmove_dump_file)
fprintf (regmove_dump_file,
"Could fix operand %d of insn %d matching operand %d.\n",
- operand_number, INSN_UID (insn), match_number);
+ op_no, INSN_UID (insn), match_no);
/* Scan backward to find the first instruction that uses
the input operand. If the operand is set here, then
- replace it in both instructions with match_number. */
+ replace it in both instructions with match_no. */
for (length = 0, p = PREV_INSN (insn); p; p = PREV_INSN (p))
{
rtx pset;
- if (GET_CODE (p) == CODE_LABEL
- || GET_CODE (p) == JUMP_INSN
- || (GET_CODE (p) == NOTE
- && (NOTE_LINE_NUMBER (p) == NOTE_INSN_LOOP_BEG
- || NOTE_LINE_NUMBER (p) == NOTE_INSN_LOOP_END)))
- break;
-
/* ??? We can't scan past the end of a basic block without
updating the register lifetime info
- (REG_DEAD/basic_block_live_at_start).
- A CALL_INSN might be the last insn of a basic block, if
- it is inside an EH region. There is no easy way to tell,
- so we just always break when we see a CALL_INSN if
- flag_exceptions is nonzero. */
- if (flag_exceptions && GET_CODE (p) == CALL_INSN)
+ (REG_DEAD/basic_block_live_at_start). */
+ if (perhaps_ends_bb_p (p))
break;
-
- if (GET_RTX_CLASS (GET_CODE (p)) != 'i')
+ else if (! INSN_P (p))
continue;
length++;
validate_replace_rtx (dst, src, insn);
/* Now make sure the dst is right. */
validate_change (insn,
- recog_operand_loc[match_number],
+ recog_data.operand_loc[match_no],
dst, 0);
}
}
REG_LIVE_LENGTH (srcno) = 2;
}
- /* We assume that a register is used exactly once per
- insn in the updates above. If this is not correct,
- no great harm is done. */
-
- REG_N_REFS (dstno) += 2 * loop_depth;
- REG_N_REFS (srcno) -= 2 * loop_depth;
-
- /* If that was the only time src was set,
- and src was not live at the start of the
- function, we know that we have no more
- references to src; clear REG_N_REFS so it
- won't make reload do any work. */
- if (REG_N_SETS (REGNO (src)) == 0
- && ! regno_uninitialized (REGNO (src)))
- REG_N_REFS (REGNO (src)) = 0;
-
if (regmove_dump_file)
fprintf (regmove_dump_file,
"Fixed operand %d of insn %d matching operand %d.\n",
- operand_number, INSN_UID (insn), match_number);
+ op_no, INSN_UID (insn), match_no);
break;
}
/* If we weren't able to replace any of the alternatives, try an
alternative appoach of copying the source to the destination. */
if (!success && copy_src != NULL_RTX)
- copy_src_to_dest (insn, copy_src, copy_dst, loop_depth);
+ copy_src_to_dest (insn, copy_src, copy_dst, old_max_uid);
}
}
-#endif /* REGISTER_CONSTRAINTS */
+
+ /* In fixup_match_1, some insns may have been inserted after basic block
+ ends. Fix that here. */
+ for (i = 0; i < n_basic_blocks; i++)
+ {
+ rtx end = BLOCK_END (i);
+ rtx new = end;
+ rtx next = NEXT_INSN (new);
+ while (next != 0 && INSN_UID (next) >= old_max_uid
+ && (i == n_basic_blocks - 1 || BLOCK_HEAD (i + 1) != next))
+ new = next, next = NEXT_INSN (new);
+ BLOCK_END (i) = new;
+ }
+
+ done:
+ /* Clean up. */
+ free (regno_src_regno);
+ free (regmove_bb_head);
}
-/* Returns the INSN_CODE for INSN if its pattern has matching constraints for
- any operand. Returns -1 if INSN can't be recognized, or if the alternative
- can't be determined.
+/* Returns nonzero if INSN's pattern has matching constraints for any operand.
+ Returns 0 if INSN can't be recognized, or if the alternative can't be
+ determined.
Initialize the info in MATCHP based on the constraints. */
struct match *matchp;
{
int likely_spilled[MAX_RECOG_OPERANDS];
- int operand_number;
- int insn_code_number = recog_memoized (insn);
+ int op_no;
int any_matches = 0;
- if (insn_code_number < 0)
- return -1;
-
- insn_extract (insn);
- if (! constrain_operands (insn_code_number, 0))
- return -1;
+ extract_insn (insn);
+ if (! constrain_operands (0))
+ return 0;
/* Must initialize this before main loop, because the code for
the commutative case may set matches for operands other than
the current one. */
- for (operand_number = insn_n_operands[insn_code_number];
- --operand_number >= 0; )
- matchp->with[operand_number] = matchp->commutative[operand_number] = -1;
+ for (op_no = recog_data.n_operands; --op_no >= 0; )
+ matchp->with[op_no] = matchp->commutative[op_no] = -1;
- for (operand_number = 0; operand_number < insn_n_operands[insn_code_number];
- operand_number++)
+ for (op_no = 0; op_no < recog_data.n_operands; op_no++)
{
- char *p, c;
+ const char *p;
+ char c;
int i = 0;
- p = insn_operand_constraint[insn_code_number][operand_number];
+ p = recog_data.constraints[op_no];
- likely_spilled[operand_number] = 0;
- matchp->use[operand_number] = READ;
- matchp->early_clobber[operand_number] = 0;
+ likely_spilled[op_no] = 0;
+ matchp->use[op_no] = READ;
+ matchp->early_clobber[op_no] = 0;
if (*p == '=')
- matchp->use[operand_number] = WRITE;
+ matchp->use[op_no] = WRITE;
else if (*p == '+')
- matchp->use[operand_number] = READWRITE;
+ matchp->use[op_no] = READWRITE;
for (;*p && i < which_alternative; p++)
if (*p == ',')
case '+':
break;
case '&':
- matchp->early_clobber[operand_number] = 1;
+ matchp->early_clobber[op_no] = 1;
break;
case '%':
- matchp->commutative[operand_number] = operand_number + 1;
- matchp->commutative[operand_number + 1] = operand_number;
+ matchp->commutative[op_no] = op_no + 1;
+ matchp->commutative[op_no + 1] = op_no;
break;
case '0': case '1': case '2': case '3': case '4':
case '5': case '6': case '7': case '8': case '9':
c -= '0';
- if (c < operand_number && likely_spilled[(unsigned char) c])
+ if (c < op_no && likely_spilled[(unsigned char) c])
break;
- matchp->with[operand_number] = c;
+ matchp->with[op_no] = c;
any_matches = 1;
- if (matchp->commutative[operand_number] >= 0)
- matchp->with[matchp->commutative[operand_number]] = c;
+ if (matchp->commutative[op_no] >= 0)
+ matchp->with[matchp->commutative[op_no]] = c;
break;
case 'a': case 'b': case 'c': case 'd': case 'e': case 'f': case 'h':
case 'j': case 'k': case 'l': case 'p': case 'q': case 't': case 'u':
case 'v': case 'w': case 'x': case 'y': case 'z': case 'A': case 'B':
case 'C': case 'D': case 'W': case 'Y': case 'Z':
- if (CLASS_LIKELY_SPILLED_P (REG_CLASS_FROM_LETTER (c)))
- likely_spilled[operand_number] = 1;
+ if (CLASS_LIKELY_SPILLED_P (REG_CLASS_FROM_LETTER ((unsigned char)c)))
+ likely_spilled[op_no] = 1;
break;
}
}
- return any_matches ? insn_code_number : -1;
+ return any_matches;
}
/* Try to replace output operand DST in SET, with input operand SRC. SET is
- the only set in INSN. INSN has just been recgnized and constrained.
+ the only set in INSN. INSN has just been recognized and constrained.
SRC is operand number OPERAND_NUMBER in INSN.
DST is operand number MATCH_NUMBER in INSN.
If BACKWARD is nonzero, we have been called in a backward pass.
Return nonzero for success. */
+
static int
fixup_match_1 (insn, set, src, src_subreg, dst, backward, operand_number,
match_number, regmove_dump_file)
int success = 0;
int num_calls = 0, s_num_calls = 0;
enum rtx_code code = NOTE;
- HOST_WIDE_INT insn_const, newconst;
+ HOST_WIDE_INT insn_const = 0, newconst;
rtx overlap = 0; /* need to move insn ? */
- rtx src_note = find_reg_note (insn, REG_DEAD, src), dst_note;
- int length, s_length, true_loop_depth;
+ rtx src_note = find_reg_note (insn, REG_DEAD, src), dst_note = NULL_RTX;
+ int length, s_length;
+
+ /* If SRC is marked as unchanging, we may not change it.
+ ??? Maybe we could get better code by removing the unchanging bit
+ instead, and changing it back if we don't succeed? */
+ if (RTX_UNCHANGING_P (src))
+ return 0;
if (! src_note)
{
&& XEXP (SET_SRC (set), 0) == src
&& GET_CODE (XEXP (SET_SRC (set), 1)) == CONST_INT)
insn_const = INTVAL (XEXP (SET_SRC (set), 1));
- else if (! stable_but_for_p (SET_SRC (set), src, dst))
+ else if (! stable_and_no_regs_but_for_p (SET_SRC (set), src, dst))
return 0;
else
/* We might find a src_note while scanning. */
for (length = s_length = 0, p = NEXT_INSN (insn); p; p = NEXT_INSN (p))
{
- if (GET_CODE (p) == CODE_LABEL || GET_CODE (p) == JUMP_INSN
- || (GET_CODE (p) == NOTE
- && (NOTE_LINE_NUMBER (p) == NOTE_INSN_LOOP_BEG
- || NOTE_LINE_NUMBER (p) == NOTE_INSN_LOOP_END)))
- break;
-
/* ??? We can't scan past the end of a basic block without updating
- the register lifetime info (REG_DEAD/basic_block_live_at_start).
- A CALL_INSN might be the last insn of a basic block, if it is
- inside an EH region. There is no easy way to tell, so we just
- always break when we see a CALL_INSN if flag_exceptions is nonzero. */
- if (flag_exceptions && GET_CODE (p) == CALL_INSN)
+ the register lifetime info (REG_DEAD/basic_block_live_at_start). */
+ if (perhaps_ends_bb_p (p))
break;
-
- if (GET_RTX_CLASS (GET_CODE (p)) != 'i')
+ else if (! INSN_P (p))
continue;
length++;
if ((dst_note = find_regno_note (p, REG_DEAD, REGNO (dst)))
&& (GET_MODE (XEXP (dst_note, 0)) == GET_MODE (dst)))
{
+ /* If we would be moving INSN, check that we won't move it
+ into the shadow of a live a live flags register. */
+ /* ??? We only try to move it in front of P, although
+ we could move it anywhere between OVERLAP and P. */
+ if (overlap && GET_MODE (PREV_INSN (p)) != VOIDmode)
+ break;
+
if (! src_note)
{
rtx q;
- rtx set2;
+ rtx set2 = NULL_RTX;
/* If an optimization is done, the value of SRC while P
is executed will be changed. Check that this is OK. */
break;
for (q = p; q; q = NEXT_INSN (q))
{
- if (GET_CODE (q) == CODE_LABEL || GET_CODE (q) == JUMP_INSN
- || (GET_CODE (q) == NOTE
- && (NOTE_LINE_NUMBER (q) == NOTE_INSN_LOOP_BEG
- || NOTE_LINE_NUMBER (q) == NOTE_INSN_LOOP_END)))
- {
- q = 0;
- break;
- }
-
/* ??? We can't scan past the end of a basic block without
updating the register lifetime info
- (REG_DEAD/basic_block_live_at_start).
- A CALL_INSN might be the last insn of a basic block, if
- it is inside an EH region. There is no easy way to tell,
- so we just always break when we see a CALL_INSN if
- flag_exceptions is nonzero. */
- if (flag_exceptions && GET_CODE (q) == CALL_INSN)
+ (REG_DEAD/basic_block_live_at_start). */
+ if (perhaps_ends_bb_p (q))
{
q = 0;
break;
}
-
- if (GET_RTX_CLASS (GET_CODE (q)) != 'i')
+ else if (! INSN_P (q))
continue;
- if (reg_overlap_mentioned_p (src, PATTERN (q))
- || reg_set_p (src, q))
+ else if (reg_overlap_mentioned_p (src, PATTERN (q))
+ || reg_set_p (src, q))
break;
}
if (q)
This also gives opportunities for subsequent
optimizations in the backward pass, so do it there. */
if (code == PLUS && backward
-#ifdef HAVE_cc0
- /* We may not emit an insn directly
- after P if the latter sets CC0. */
- && ! sets_cc0_p (PATTERN (p))
-#endif
- )
-
+ /* Don't do this if we can likely tie DST to SET_DEST
+ of P later; we can't do this tying here if we got a
+ hard register. */
+ && ! (dst_note && ! REG_N_CALLS_CROSSED (REGNO (dst))
+ && single_set (p)
+ && GET_CODE (SET_DEST (single_set (p))) == REG
+ && (REGNO (SET_DEST (single_set (p)))
+ < FIRST_PSEUDO_REGISTER))
+ /* We may only emit an insn directly after P if we
+ are not in the shadow of a live flags register. */
+ && GET_MODE (p) == VOIDmode)
{
search_end = q;
q = insn;
/* Reject out of range shifts. */
if (code != PLUS
&& (newconst < 0
- || (newconst
- >= GET_MODE_BITSIZE (GET_MODE (SET_SRC (set2))))))
+ || ((unsigned HOST_WIDE_INT) newconst
+ >= (GET_MODE_BITSIZE (GET_MODE
+ (SET_SRC (set2)))))))
break;
if (code == PLUS)
{
validate_change (q, &XEXP (SET_SRC (set2), 1),
GEN_INT (newconst), 1);
}
- validate_change (insn, recog_operand_loc[match_number], src, 1);
+ validate_change (insn, recog_data.operand_loc[match_number], src, 1);
if (validate_replace_rtx (dst, src_subreg, p))
success = 1;
break;
break;
if (! src_note && reg_overlap_mentioned_p (src, PATTERN (p)))
{
- /* INSN was already checked to be movable when
- we found no REG_DEAD note for src on it. */
+ /* INSN was already checked to be movable wrt. the registers that it
+ sets / uses when we found no REG_DEAD note for src on it, but it
+ still might clobber the flags register. We'll have to check that
+ we won't insert it into the shadow of a live flags register when
+ we finally know where we are to move it. */
overlap = p;
src_note = find_reg_note (p, REG_DEAD, src);
}
if (! success)
return 0;
- true_loop_depth = backward ? 2 - loop_depth : loop_depth;
-
/* Remove the death note for DST from P. */
remove_note (p, dst_note);
if (code == MINUS)
{
post_inc = emit_insn_after (copy_rtx (PATTERN (insn)), p);
-#if defined (HAVE_PRE_INCREMENT) || defined (HAVE_PRE_DECREMENT)
- if (search_end
+ if ((HAVE_PRE_INCREMENT || HAVE_PRE_DECREMENT)
+ && search_end
&& try_auto_increment (search_end, post_inc, 0, src, newconst, 1))
post_inc = 0;
-#endif
validate_change (insn, &XEXP (SET_SRC (set), 1), GEN_INT (insn_const), 0);
REG_N_SETS (REGNO (src))++;
- REG_N_REFS (REGNO (src)) += true_loop_depth;
REG_LIVE_LENGTH (REGNO (src))++;
}
if (overlap)
rtx pat = PATTERN (insn);
if (src_note)
remove_note (overlap, src_note);
-#if defined (HAVE_POST_INCREMENT) || defined (HAVE_POST_DECREMENT)
- if (code == PLUS
+ if ((HAVE_POST_INCREMENT || HAVE_POST_DECREMENT)
+ && code == PLUS
&& try_auto_increment (overlap, insn, 0, src, insn_const, 0))
insn = overlap;
else
-#endif
{
rtx notes = REG_NOTES (insn);
NOTE_SOURCE_FILE (insn) = 0;
/* emit_insn_after_with_line_notes has no
return value, so search for the new insn. */
- for (insn = p; PATTERN (insn) != pat; )
+ insn = p;
+ while (! INSN_P (insn) || PATTERN (insn) != pat)
insn = PREV_INSN (insn);
REG_NOTES (insn) = notes;
if (! overlap && (code == PLUS || code == MINUS))
{
rtx note = find_reg_note (insn, REG_EQUAL, NULL_RTX);
- rtx q, set2;
+ rtx q, set2 = NULL_RTX;
int num_calls2 = 0, s_length2 = 0;
if (note && CONSTANT_P (XEXP (note, 0)))
{
for (q = PREV_INSN (insn); q; q = PREV_INSN(q))
{
- if (GET_CODE (q) == CODE_LABEL || GET_CODE (q) == JUMP_INSN
- || (GET_CODE (q) == NOTE
- && (NOTE_LINE_NUMBER (q) == NOTE_INSN_LOOP_BEG
- || NOTE_LINE_NUMBER (q) == NOTE_INSN_LOOP_END)))
- {
- q = 0;
- break;
- }
-
/* ??? We can't scan past the end of a basic block without
updating the register lifetime info
- (REG_DEAD/basic_block_live_at_start).
- A CALL_INSN might be the last insn of a basic block, if
- it is inside an EH region. There is no easy way to tell,
- so we just always break when we see a CALL_INSN if
- flag_exceptions is nonzero. */
- if (flag_exceptions && GET_CODE (q) == CALL_INSN)
+ (REG_DEAD/basic_block_live_at_start). */
+ if (perhaps_ends_bb_p (q))
{
q = 0;
break;
}
-
- if (GET_RTX_CLASS (GET_CODE (q)) != 'i')
+ else if (! INSN_P (q))
continue;
+
s_length2++;
if (reg_set_p (src, q))
{
NOTE_SOURCE_FILE (q) = 0;
REG_N_SETS (REGNO (src))--;
REG_N_CALLS_CROSSED (REGNO (src)) -= num_calls2;
- REG_N_REFS (REGNO (src)) -= true_loop_depth;
REG_LIVE_LENGTH (REGNO (src)) -= s_length2;
insn_const = 0;
}
}
}
- /* Don't remove this seemingly useless if, it is needed to pair with the
- else in the next two conditionally included code blocks. */
- if (0)
- {;}
-#if defined (HAVE_PRE_INCREMENT) || defined (HAVE_PRE_DECREMENT)
- else if ((code == PLUS || code == MINUS) && insn_const
+ if ((HAVE_PRE_INCREMENT || HAVE_PRE_DECREMENT)
+ && (code == PLUS || code == MINUS) && insn_const
&& try_auto_increment (p, insn, 0, src, insn_const, 1))
insn = p;
-#endif
-#if defined (HAVE_POST_INCREMENT) || defined (HAVE_POST_DECREMENT)
- else if (post_inc
+ else if ((HAVE_POST_INCREMENT || HAVE_POST_DECREMENT)
+ && post_inc
&& try_auto_increment (p, post_inc, post_inc_set, src, newconst, 0))
post_inc = 0;
-#endif
-#if defined (HAVE_PRE_INCREMENT) || defined (HAVE_PRE_DECREMENT)
/* If post_inc still prevails, try to find an
insn where it can be used as a pre-in/decrement.
If code is MINUS, this was already tried. */
if (post_inc && code == PLUS
/* Check that newconst is likely to be usable
in a pre-in/decrement before starting the search. */
- && (0
-#if defined (HAVE_PRE_INCREMENT)
- || (newconst > 0 && newconst <= MOVE_MAX)
-#endif
-#if defined (HAVE_PRE_DECREMENT)
- || (newconst < 0 && newconst >= -MOVE_MAX)
-#endif
- ) && exact_log2 (newconst))
+ && ((HAVE_PRE_INCREMENT && newconst > 0 && newconst <= MOVE_MAX)
+ || (HAVE_PRE_DECREMENT && newconst < 0 && newconst >= -MOVE_MAX))
+ && exact_log2 (newconst))
{
rtx q, inc_dest;
inc_dest = post_inc_set ? SET_DEST (post_inc_set) : src;
for (q = post_inc; (q = NEXT_INSN (q)); )
{
- if (GET_CODE (q) == CODE_LABEL || GET_CODE (q) == JUMP_INSN
- || (GET_CODE (q) == NOTE
- && (NOTE_LINE_NUMBER (q) == NOTE_INSN_LOOP_BEG
- || NOTE_LINE_NUMBER (q) == NOTE_INSN_LOOP_END)))
- break;
-
/* ??? We can't scan past the end of a basic block without updating
- the register lifetime info (REG_DEAD/basic_block_live_at_start).
- A CALL_INSN might be the last insn of a basic block, if it
- is inside an EH region. There is no easy way to tell so we
- just always break when we see a CALL_INSN if flag_exceptions
- is nonzero. */
- if (flag_exceptions && GET_CODE (q) == CALL_INSN)
+ the register lifetime info
+ (REG_DEAD/basic_block_live_at_start). */
+ if (perhaps_ends_bb_p (q))
break;
-
- if (GET_RTX_CLASS (GET_CODE (q)) != 'i')
+ else if (! INSN_P (q))
continue;
- if (src != inc_dest && (reg_overlap_mentioned_p (src, PATTERN (q))
- || reg_set_p (src, q)))
+ else if (src != inc_dest
+ && (reg_overlap_mentioned_p (src, PATTERN (q))
+ || reg_set_p (src, q)))
break;
- if (reg_set_p (inc_dest, q))
+ else if (reg_set_p (inc_dest, q))
break;
- if (reg_overlap_mentioned_p (inc_dest, PATTERN (q)))
+ else if (reg_overlap_mentioned_p (inc_dest, PATTERN (q)))
{
try_auto_increment (q, post_inc,
post_inc_set, inc_dest, newconst, 1);
}
}
}
-#endif /* defined (HAVE_PRE_INCREMENT) || defined (HAVE_PRE_DECREMENT) */
+
/* Move the death note for DST to INSN if it is used
there. */
if (reg_overlap_mentioned_p (dst, PATTERN (insn)))
if (REG_LIVE_LENGTH (REGNO (dst)) < 2)
REG_LIVE_LENGTH (REGNO (dst)) = 2;
}
-
- /* We assume that a register is used exactly once per
- insn in the updates above. If this is not correct,
- no great harm is done. */
-
- REG_N_REFS (REGNO (src)) += 2 * true_loop_depth;
- REG_N_REFS (REGNO (dst)) -= 2 * true_loop_depth;
-
- /* If that was the only time dst was set,
- and dst was not live at the start of the
- function, we know that we have no more
- references to dst; clear REG_N_REFS so it
- won't make reload do any work. */
- if (REG_N_SETS (REGNO (dst)) == 0
- && ! regno_uninitialized (REGNO (dst)))
- REG_N_REFS (REGNO (dst)) = 0;
-
if (regmove_dump_file)
fprintf (regmove_dump_file,
"Fixed operand %d of insn %d matching operand %d.\n",
}
-/* return nonzero if X is stable but for mentioning SRC or mentioning /
- changing DST . If in doubt, presume it is unstable. */
+/* return nonzero if X is stable and mentions no regsiters but for
+ mentioning SRC or mentioning / changing DST . If in doubt, presume
+ it is unstable.
+ The rationale is that we want to check if we can move an insn easily
+ while just paying attention to SRC and DST. A register is considered
+ stable if it has the RTX_UNCHANGING_P bit set, but that would still
+ leave the burden to update REG_DEAD / REG_UNUSED notes, so we don't
+ want any registers but SRC and DST. */
static int
-stable_but_for_p (x, src, dst)
+stable_and_no_regs_but_for_p (x, src, dst)
rtx x, src, dst;
{
RTX_CODE code = GET_CODE (x);
case '<': case '1': case 'c': case '2': case 'b': case '3':
{
int i;
- char *fmt = GET_RTX_FORMAT (code);
+ const char *fmt = GET_RTX_FORMAT (code);
for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
- if (fmt[i] == 'e' && ! stable_but_for_p (XEXP (x, i), src, dst))
+ if (fmt[i] == 'e'
+ && ! stable_and_no_regs_but_for_p (XEXP (x, i), src, dst))
return 0;
return 1;
}
case 'o':
- if (x == src || x == dst)
- return 1;
+ if (code == REG)
+ return x == src || x == dst;
+ /* If this is a MEM, look inside - there might be a register hidden in
+ the address of an unchanging MEM. */
+ if (code == MEM
+ && ! stable_and_no_regs_but_for_p (XEXP (x, 0), src, dst))
+ return 0;
/* fall through */
default:
return ! rtx_unstable_p (x);
}
}
+\f
+/* Track stack adjustments and stack memory references. Attempt to
+ reduce the number of stack adjustments by back-propogating across
+ the memory references.
+
+ This is intended primarily for use with targets that do not define
+ ACCUMULATE_OUTGOING_ARGS. It is of significantly more value to
+ targets that define PREFERRED_STACK_BOUNDARY more aligned than
+ STACK_BOUNDARY (e.g. x86), or if not all registers can be pushed
+ (e.g. x86 fp regs) which would ordinarily have to be implemented
+ as a sub/mov pair due to restrictions in calls.c.
+
+ Propogation stops when any of the insns that need adjusting are
+ (a) no longer valid because we've exceeded their range, (b) a
+ non-trivial push instruction, or (c) a call instruction.
+
+ Restriction B is based on the assumption that push instructions
+ are smaller or faster. If a port really wants to remove all
+ pushes, it should have defined ACCUMULATE_OUTGOING_ARGS. The
+ one exception that is made is for an add immediately followed
+ by a push. */
+
+/* This structure records stack memory references between stack adjusting
+ instructions. */
+
+struct csa_memlist
+{
+ HOST_WIDE_INT sp_offset;
+ rtx insn, *mem;
+ struct csa_memlist *next;
+};
+
+static int stack_memref_p PARAMS ((rtx));
+static rtx single_set_for_csa PARAMS ((rtx));
+static void free_csa_memlist PARAMS ((struct csa_memlist *));
+static struct csa_memlist *record_one_stack_memref
+ PARAMS ((rtx, rtx *, struct csa_memlist *));
+static int try_apply_stack_adjustment
+ PARAMS ((rtx, struct csa_memlist *, HOST_WIDE_INT, HOST_WIDE_INT));
+static void combine_stack_adjustments_for_block PARAMS ((basic_block));
+static int record_stack_memrefs PARAMS ((rtx *, void *));
+
-/* Test if regmove seems profitable for this target. Regmove is useful only
- if some common patterns are two address, i.e. require matching constraints,
- so we check that condition here. */
+/* Main entry point for stack adjustment combination. */
-int
-regmove_profitable_p ()
+void
+combine_stack_adjustments ()
{
-#ifdef REGISTER_CONSTRAINTS
- struct match match;
- enum machine_mode mode;
- optab tstoptab = add_optab;
- do /* check add_optab and ashl_optab */
- for (mode = GET_CLASS_NARROWEST_MODE (MODE_INT); mode != VOIDmode;
- mode = GET_MODE_WIDER_MODE (mode))
+ int i;
+
+ for (i = 0; i < n_basic_blocks; ++i)
+ combine_stack_adjustments_for_block (BASIC_BLOCK (i));
+}
+
+/* Recognize a MEM of the form (sp) or (plus sp const). */
+
+static int
+stack_memref_p (x)
+ rtx x;
+{
+ if (GET_CODE (x) != MEM)
+ return 0;
+ x = XEXP (x, 0);
+
+ if (x == stack_pointer_rtx)
+ return 1;
+ if (GET_CODE (x) == PLUS
+ && XEXP (x, 0) == stack_pointer_rtx
+ && GET_CODE (XEXP (x, 1)) == CONST_INT)
+ return 1;
+
+ return 0;
+}
+
+/* Recognize either normal single_set or the hack in i386.md for
+ tying fp and sp adjustments. */
+
+static rtx
+single_set_for_csa (insn)
+ rtx insn;
+{
+ int i;
+ rtx tmp = single_set (insn);
+ if (tmp)
+ return tmp;
+
+ if (GET_CODE (insn) != INSN
+ || GET_CODE (PATTERN (insn)) != PARALLEL)
+ return NULL_RTX;
+
+ tmp = PATTERN (insn);
+ if (GET_CODE (XVECEXP (tmp, 0, 0)) != SET)
+ return NULL_RTX;
+
+ for (i = 1; i < XVECLEN (tmp, 0); ++i)
+ {
+ rtx this = XVECEXP (tmp, 0, i);
+
+ /* The special case is allowing a no-op set. */
+ if (GET_CODE (this) == SET
+ && SET_SRC (this) == SET_DEST (this))
+ ;
+ else if (GET_CODE (this) != CLOBBER
+ && GET_CODE (this) != USE)
+ return NULL_RTX;
+ }
+
+ return XVECEXP (tmp, 0, 0);
+}
+
+/* Free the list of csa_memlist nodes. */
+
+static void
+free_csa_memlist (memlist)
+ struct csa_memlist *memlist;
+{
+ struct csa_memlist *next;
+ for (; memlist ; memlist = next)
+ {
+ next = memlist->next;
+ free (memlist);
+ }
+}
+
+/* Create a new csa_memlist node from the given memory reference.
+ It is already known that the memory is stack_memref_p. */
+
+static struct csa_memlist *
+record_one_stack_memref (insn, mem, next_memlist)
+ rtx insn, *mem;
+ struct csa_memlist *next_memlist;
+{
+ struct csa_memlist *ml;
+
+ ml = (struct csa_memlist *) xmalloc (sizeof (*ml));
+
+ if (XEXP (*mem, 0) == stack_pointer_rtx)
+ ml->sp_offset = 0;
+ else
+ ml->sp_offset = INTVAL (XEXP (XEXP (*mem, 0), 1));
+
+ ml->insn = insn;
+ ml->mem = mem;
+ ml->next = next_memlist;
+
+ return ml;
+}
+
+/* Attempt to apply ADJUST to the stack adjusting insn INSN, as well
+ as each of the memories in MEMLIST. Return true on success. */
+
+static int
+try_apply_stack_adjustment (insn, memlist, new_adjust, delta)
+ rtx insn;
+ struct csa_memlist *memlist;
+ HOST_WIDE_INT new_adjust, delta;
+{
+ struct csa_memlist *ml;
+ rtx set;
+
+ /* We know INSN matches single_set_for_csa, because that's what we
+ recognized earlier. However, if INSN is not single_set, it is
+ doing double duty as a barrier for frame pointer memory accesses,
+ which we are not recording. Therefore, an adjust insn that is not
+ single_set may not have a positive delta applied. */
+
+ if (delta > 0 && ! single_set (insn))
+ return 0;
+ set = single_set_for_csa (insn);
+ validate_change (insn, &XEXP (SET_SRC (set), 1), GEN_INT (new_adjust), 1);
+
+ for (ml = memlist; ml ; ml = ml->next)
+ {
+ HOST_WIDE_INT c = ml->sp_offset - delta;
+ rtx new = gen_rtx_MEM (GET_MODE (*ml->mem),
+ plus_constant (stack_pointer_rtx, c));
+
+ /* Don't reference memory below the stack pointer. */
+ if (c < 0)
{
- int icode = (int) tstoptab->handlers[(int) mode].insn_code;
- rtx reg0, reg1, reg2, pat;
- int i;
-
- if (GET_MODE_BITSIZE (mode) < 32 || icode == CODE_FOR_nothing)
- continue;
- for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
- if (TEST_HARD_REG_BIT (reg_class_contents[GENERAL_REGS], i))
- break;
- if (i + 2 >= FIRST_PSEUDO_REGISTER)
- break;
- reg0 = gen_rtx_REG (insn_operand_mode[icode][0], i);
- reg1 = gen_rtx_REG (insn_operand_mode[icode][1], i + 1);
- reg2 = gen_rtx_REG (insn_operand_mode[icode][2], i + 2);
- if (! (*insn_operand_predicate[icode][0]) (reg0, VOIDmode)
- || ! (*insn_operand_predicate[icode][1]) (reg1, VOIDmode)
- || ! (*insn_operand_predicate[icode][2]) (reg2, VOIDmode))
- break;
- pat = GEN_FCN (icode) (reg0, reg1, reg2);
- if (! pat)
- continue;
- if (GET_CODE (pat) == SEQUENCE)
- pat = XVECEXP (pat, 0, XVECLEN (pat, 0) - 1);
- else
- pat = make_insn_raw (pat);
- if (! single_set (pat)
- || GET_CODE (SET_SRC (single_set (pat))) != tstoptab->code)
- /* Unexpected complexity; don't need to handle this unless
- we find a machine where this occurs and regmove should
- be enabled. */
- break;
- if (find_matches (pat, &match) >= 0)
- return 1;
- break;
+ cancel_changes (0);
+ return 0;
+ }
+
+ MEM_COPY_ATTRIBUTES (new, *ml->mem);
+ validate_change (ml->insn, ml->mem, new, 1);
+ }
+
+ if (apply_change_group ())
+ {
+ /* Succeeded. Update our knowledge of the memory references. */
+ for (ml = memlist; ml ; ml = ml->next)
+ ml->sp_offset -= delta;
+
+ return 1;
+ }
+ else
+ return 0;
+}
+
+/* Called via for_each_rtx and used to record all stack memory references in
+ the insn and discard all other stack pointer references. */
+struct record_stack_memrefs_data
+{
+ rtx insn;
+ struct csa_memlist *memlist;
+};
+
+static int
+record_stack_memrefs (xp, data)
+ rtx *xp;
+ void *data;
+{
+ rtx x = *xp;
+ struct record_stack_memrefs_data *d =
+ (struct record_stack_memrefs_data *) data;
+ if (!x)
+ return 0;
+ switch (GET_CODE (x))
+ {
+ case MEM:
+ if (!reg_mentioned_p (stack_pointer_rtx, x))
+ return -1;
+ /* We are not able to handle correctly all possible memrefs containing
+ stack pointer, so this check is neccesary. */
+ if (stack_memref_p (x))
+ {
+ d->memlist = record_one_stack_memref (d->insn, xp, d->memlist);
+ return -1;
}
- while (tstoptab != ashl_optab && (tstoptab = ashl_optab, 1));
-#endif /* REGISTER_CONSTRAINTS */
+ return 1;
+ case REG:
+ /* ??? We want be able to handle non-memory stack pointer references
+ later. For now just discard all insns refering to stack pointer
+ outside mem expressions. We would probably want to teach
+ validate_replace to simplify expressions first. */
+ if (x == stack_pointer_rtx)
+ return 1;
+ break;
+ default:
+ break;
+ }
return 0;
}
+
+/* Subroutine of combine_stack_adjustments, called for each basic block. */
+
+static void
+combine_stack_adjustments_for_block (bb)
+ basic_block bb;
+{
+ HOST_WIDE_INT last_sp_adjust = 0;
+ rtx last_sp_set = NULL_RTX;
+ struct csa_memlist *memlist = NULL;
+ rtx pending_delete;
+ rtx insn, next;
+ struct record_stack_memrefs_data data;
+
+ for (insn = bb->head; ; insn = next)
+ {
+ rtx set;
+
+ pending_delete = NULL_RTX;
+ next = NEXT_INSN (insn);
+
+ if (! INSN_P (insn))
+ goto processed;
+
+ set = single_set_for_csa (insn);
+ if (set)
+ {
+ rtx dest = SET_DEST (set);
+ rtx src = SET_SRC (set);
+
+ /* Find constant additions to the stack pointer. */
+ if (dest == stack_pointer_rtx
+ && GET_CODE (src) == PLUS
+ && XEXP (src, 0) == stack_pointer_rtx
+ && GET_CODE (XEXP (src, 1)) == CONST_INT)
+ {
+ HOST_WIDE_INT this_adjust = INTVAL (XEXP (src, 1));
+
+ /* If we've not seen an adjustment previously, record
+ it now and continue. */
+ if (! last_sp_set)
+ {
+ last_sp_set = insn;
+ last_sp_adjust = this_adjust;
+ goto processed;
+ }
+
+ /* If not all recorded memrefs can be adjusted, or the
+ adjustment is now too large for a constant addition,
+ we cannot merge the two stack adjustments. */
+ if (! try_apply_stack_adjustment (last_sp_set, memlist,
+ last_sp_adjust + this_adjust,
+ this_adjust))
+ {
+ free_csa_memlist (memlist);
+ memlist = NULL;
+ last_sp_set = insn;
+ last_sp_adjust = this_adjust;
+ goto processed;
+ }
+
+ /* It worked! */
+ pending_delete = insn;
+ last_sp_adjust += this_adjust;
+
+ /* If, by some accident, the adjustments cancel out,
+ delete both insns and start from scratch. */
+ if (last_sp_adjust == 0)
+ {
+ if (last_sp_set == bb->head)
+ bb->head = NEXT_INSN (last_sp_set);
+ flow_delete_insn (last_sp_set);
+
+ free_csa_memlist (memlist);
+ memlist = NULL;
+ last_sp_set = NULL_RTX;
+ }
+
+ goto processed;
+ }
+
+ /* Find a predecrement of exactly the previous adjustment and
+ turn it into a direct store. Obviously we can't do this if
+ there were any intervening uses of the stack pointer. */
+ if (memlist == NULL
+ && GET_CODE (dest) == MEM
+ && ((GET_CODE (XEXP (dest, 0)) == PRE_DEC
+ && (last_sp_adjust
+ == (HOST_WIDE_INT) GET_MODE_SIZE (GET_MODE (dest))))
+ || (GET_CODE (XEXP (dest, 0)) == PRE_MODIFY
+ && GET_CODE (XEXP (XEXP (dest, 0), 1)) == PLUS
+ && XEXP (XEXP (XEXP (dest, 0), 1), 0) == stack_pointer_rtx
+ && (GET_CODE (XEXP (XEXP (XEXP (dest, 0), 1), 1))
+ == CONST_INT)
+ && (INTVAL (XEXP (XEXP (XEXP (dest, 0), 1), 1))
+ == -last_sp_adjust)))
+ && XEXP (XEXP (dest, 0), 0) == stack_pointer_rtx
+ && ! reg_mentioned_p (stack_pointer_rtx, src)
+ && memory_address_p (GET_MODE (dest), stack_pointer_rtx)
+ && validate_change (insn, &SET_DEST (set),
+ change_address (dest, VOIDmode,
+ stack_pointer_rtx), 0))
+ {
+ if (last_sp_set == bb->head)
+ bb->head = NEXT_INSN (last_sp_set);
+ flow_delete_insn (last_sp_set);
+
+ free_csa_memlist (memlist);
+ memlist = NULL;
+ last_sp_set = NULL_RTX;
+ last_sp_adjust = 0;
+ goto processed;
+ }
+ }
+
+ data.insn = insn;
+ data.memlist = memlist;
+ if (GET_CODE (insn) != CALL_INSN && last_sp_set
+ && !for_each_rtx (&PATTERN (insn), record_stack_memrefs, &data))
+ {
+ memlist = data.memlist;
+ goto processed;
+ }
+ memlist = data.memlist;
+
+ /* Otherwise, we were not able to process the instruction.
+ Do not continue collecting data across such a one. */
+ if (last_sp_set
+ && (GET_CODE (insn) == CALL_INSN
+ || reg_mentioned_p (stack_pointer_rtx, PATTERN (insn))))
+ {
+ free_csa_memlist (memlist);
+ memlist = NULL;
+ last_sp_set = NULL_RTX;
+ last_sp_adjust = 0;
+ }
+
+ processed:
+ if (insn == bb->end)
+ break;
+
+ if (pending_delete)
+ flow_delete_insn (pending_delete);
+ }
+
+ if (pending_delete)
+ {
+ bb->end = PREV_INSN (pending_delete);
+ flow_delete_insn (pending_delete);
+ }
+}