/* Subroutines used by or related to instruction recognition.
- Copyright (C) 1987, 1988, 91-98, 1999 Free Software Foundation, Inc.
+ Copyright (C) 1987, 1988, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998
+ 1999, 2000 Free Software Foundation, Inc.
This file is part of GNU CC.
#include "config.h"
#include "system.h"
#include "rtl.h"
+#include "tm_p.h"
#include "insn-config.h"
#include "insn-attr.h"
#include "insn-flags.h"
#include "insn-codes.h"
+#include "hard-reg-set.h"
#include "recog.h"
#include "regs.h"
-#include "hard-reg-set.h"
+#include "function.h"
#include "flags.h"
#include "real.h"
#include "toplev.h"
#include "basic-block.h"
+#include "output.h"
+#include "reload.h"
#ifndef STACK_PUSH_CODE
#ifdef STACK_GROWS_DOWNWARD
#endif
#endif
-static void validate_replace_rtx_1 PROTO((rtx *, rtx, rtx, rtx));
-static rtx *find_single_use_1 PROTO((rtx, rtx *));
-static rtx *find_constant_term_loc PROTO((rtx *));
-static int insn_invalid_p PROTO((rtx));
+static void validate_replace_rtx_1 PARAMS ((rtx *, rtx, rtx, rtx));
+static rtx *find_single_use_1 PARAMS ((rtx, rtx *));
+static rtx *find_constant_term_loc PARAMS ((rtx *));
+static int insn_invalid_p PARAMS ((rtx));
/* Nonzero means allow operands to be volatile.
This should be 0 if you are generating rtl, such as if you are calling
int volatile_ok;
-/* The next variables are set up by extract_insn. The first four of them
- are also set up during insn_extract. */
-
-/* Indexed by N, gives value of operand N. */
-rtx recog_operand[MAX_RECOG_OPERANDS];
-
-/* Indexed by N, gives location where operand N was found. */
-rtx *recog_operand_loc[MAX_RECOG_OPERANDS];
-
-/* Indexed by N, gives location where the Nth duplicate-appearance of
- an operand was found. This is something that matched MATCH_DUP. */
-rtx *recog_dup_loc[MAX_RECOG_OPERANDS];
-
-/* Indexed by N, gives the operand number that was duplicated in the
- Nth duplicate-appearance of an operand. */
-char recog_dup_num[MAX_RECOG_OPERANDS];
-
-/* The number of operands of the insn. */
-int recog_n_operands;
-
-/* The number of MATCH_DUPs in the insn. */
-int recog_n_dups;
-
-/* The number of alternatives in the constraints for the insn. */
-int recog_n_alternatives;
-
-/* Indexed by N, gives the mode of operand N. */
-enum machine_mode recog_operand_mode[MAX_RECOG_OPERANDS];
-
-/* Indexed by N, gives the constraint string for operand N. */
-const char *recog_constraints[MAX_RECOG_OPERANDS];
-
-/* Indexed by N, gives the type (in, out, inout) for operand N. */
-enum op_type recog_op_type[MAX_RECOG_OPERANDS];
-
-#ifndef REGISTER_CONSTRAINTS
-/* Indexed by N, nonzero if operand N should be an address. */
-char recog_operand_address_p[MAX_RECOG_OPERANDS];
-#endif
+struct recog_data recog_data;
/* Contains a vector of operand_alternative structures for every operand.
Set up by preprocess_constraints. */
through this one. (The only exception is in combine.c.) */
int
-recog_memoized (insn)
+recog_memoized_1 (insn)
rtx insn;
{
if (INSN_CODE (insn) < 0)
{
int j;
- newpat = gen_rtx_PARALLEL (VOIDmode,
- gen_rtvec (XVECLEN (pat, 0) - 1));
+ newpat
+ = gen_rtx_PARALLEL (VOIDmode,
+ rtvec_alloc (XVECLEN (pat, 0) - 1));
for (j = 0; j < XVECLEN (newpat, 0); j++)
XVECEXP (newpat, 0, j) = XVECEXP (pat, 0, j);
}
rtx from, to, object;
{
register int i, j;
- register char *fmt;
+ register const char *fmt;
register rtx x = *loc;
- enum rtx_code code = GET_CODE (x);
+ enum rtx_code code;
+ if (!x)
+ return;
+ code = GET_CODE (x);
/* X matches FROM if it is the same rtx or they are both referring to the
same register in the same mode. Avoid calling rtx_equal_p unless the
operands look similar. */
/* In these cases, the operation to be performed depends on the mode
of the operand. If we are replacing the operand with a VOIDmode
constant, we lose the information. So try to simplify the operation
- in that case. If it fails, substitute in something that we know
- won't be recognized. */
+ in that case. */
if (GET_MODE (to) == VOIDmode
- && (XEXP (x, 0) == from
- || (GET_CODE (XEXP (x, 0)) == REG && GET_CODE (from) == REG
- && GET_MODE (XEXP (x, 0)) == GET_MODE (from)
- && REGNO (XEXP (x, 0)) == REGNO (from))))
+ && (rtx_equal_p (XEXP (x, 0), from)
+ || (GET_CODE (XEXP (x, 0)) == SUBREG
+ && rtx_equal_p (SUBREG_REG (XEXP (x, 0)), from))))
{
- rtx new = simplify_unary_operation (code, GET_MODE (x), to,
- GET_MODE (from));
- if (new == 0)
+ rtx new = NULL_RTX;
+
+ /* If there is a subreg involved, crop to the portion of the
+ constant that we are interested in. */
+ if (GET_CODE (XEXP (x, 0)) == SUBREG)
+ to = operand_subword (to, SUBREG_WORD (XEXP (x, 0)),
+ 0, GET_MODE (from));
+
+ /* If the above didn't fail, perform the extension from the
+ mode of the operand (and not the mode of FROM). */
+ if (to)
+ new = simplify_unary_operation (code, GET_MODE (x), to,
+ GET_MODE (XEXP (x, 0)));
+
+ /* If any of the above failed, substitute in something that
+ we know won't be recognized. */
+ if (!new)
new = gen_rtx_CLOBBER (GET_MODE (x), const0_rtx);
validate_change (object, loc, new, 1);
break;
case SUBREG:
+ /* In case we are replacing by constant, attempt to simplify it to non-SUBREG
+ expression. We can't do this later, since the information about inner mode
+ may be lost. */
+ if (CONSTANT_P (to) && rtx_equal_p (SUBREG_REG (x), from))
+ {
+ if (GET_MODE_SIZE (GET_MODE (x)) == UNITS_PER_WORD
+ && GET_MODE_SIZE (GET_MODE (from)) > UNITS_PER_WORD
+ && GET_MODE_CLASS (GET_MODE (x)) == MODE_INT)
+ {
+ rtx temp = operand_subword (to, SUBREG_WORD (x),
+ 0, GET_MODE (from));
+ if (temp)
+ {
+ validate_change (object, loc, temp, 1);
+ return;
+ }
+ }
+ if (subreg_lowpart_p (x))
+ {
+ rtx new = gen_lowpart_if_possible (GET_MODE (x), to);
+ if (new)
+ {
+ validate_change (object, loc, new, 1);
+ return;
+ }
+ }
+
+ /* A paradoxical SUBREG of a VOIDmode constant is the same constant,
+ since we are saying that the high bits don't matter. */
+ if (GET_MODE (to) == VOIDmode
+ && GET_MODE_SIZE (GET_MODE (x)) > GET_MODE_SIZE (GET_MODE (from)))
+ {
+ validate_change (object, loc, to, 1);
+ return;
+ }
+ }
+
+ /* Changing mode twice with SUBREG => just change it once,
+ or not at all if changing back to starting mode. */
+ if (GET_CODE (to) == SUBREG
+ && rtx_equal_p (SUBREG_REG (x), from))
+ {
+ if (GET_MODE (x) == GET_MODE (SUBREG_REG (to))
+ && SUBREG_WORD (x) == 0 && SUBREG_WORD (to) == 0)
+ {
+ validate_change (object, loc, SUBREG_REG (to), 1);
+ return;
+ }
+
+ validate_change (object, loc,
+ gen_rtx_SUBREG (GET_MODE (x), SUBREG_REG (to),
+ SUBREG_WORD (x) + SUBREG_WORD (to)), 1);
+ return;
+ }
+
/* If we have a SUBREG of a register that we are replacing and we are
replacing it with a MEM, make a new MEM and try replacing the
SUBREG with it. Don't do this if the MEM has a mode-dependent address
or if we would be widening it. */
- if (SUBREG_REG (x) == from
- && GET_CODE (from) == REG
+ if (GET_CODE (from) == REG
&& GET_CODE (to) == MEM
+ && rtx_equal_p (SUBREG_REG (x), from)
&& ! mode_dependent_address_p (XEXP (to, 0))
&& ! MEM_VOLATILE_P (to)
&& GET_MODE_SIZE (GET_MODE (x)) <= GET_MODE_SIZE (GET_MODE (to)))
- MIN (UNITS_PER_WORD, GET_MODE_SIZE (mode)));
new = gen_rtx_MEM (mode, plus_constant (XEXP (to, 0), offset));
- RTX_UNCHANGING_P (new) = RTX_UNCHANGING_P (to);
MEM_COPY_ATTRIBUTES (new, to);
validate_change (object, loc, new, 1);
return;
likely to be an insertion operation; if it was, nothing bad will
happen, we might just fail in some cases). */
- if (XEXP (x, 0) == from && GET_CODE (from) == REG && GET_CODE (to) == MEM
+ if (GET_CODE (from) == REG && GET_CODE (to) == MEM
+ && rtx_equal_p (XEXP (x, 0), from)
&& GET_CODE (XEXP (x, 1)) == CONST_INT
&& GET_CODE (XEXP (x, 2)) == CONST_INT
&& ! mode_dependent_address_p (XEXP (to, 0))
#ifdef HAVE_extzv
if (code == ZERO_EXTRACT)
{
- wanted_mode = insn_operand_mode[(int) CODE_FOR_extzv][1];
+ wanted_mode = insn_data[(int) CODE_FOR_extzv].operand[1].mode;
if (wanted_mode == VOIDmode)
wanted_mode = word_mode;
}
#ifdef HAVE_extv
if (code == SIGN_EXTRACT)
{
- wanted_mode = insn_operand_mode[(int) CODE_FOR_extv][1];
+ wanted_mode = insn_data[(int) CODE_FOR_extv].operand[1].mode;
if (wanted_mode == VOIDmode)
wanted_mode = word_mode;
}
newmem = gen_rtx_MEM (wanted_mode,
plus_constant (XEXP (to, 0), offset));
- RTX_UNCHANGING_P (newmem) = RTX_UNCHANGING_P (to);
MEM_COPY_ATTRIBUTES (newmem, to);
validate_change (object, &XEXP (x, 2), GEN_INT (pos), 1);
}
}
+/* Try replacing every occurrence of FROM in subexpression LOC of INSN
+ with TO. After all changes have been made, validate by seeing
+ if INSN is still valid. */
+
+int
+validate_replace_rtx_subexp (from, to, insn, loc)
+ rtx from, to, insn, *loc;
+{
+ validate_replace_rtx_1 (loc, from, to, insn);
+ return apply_change_group ();
+}
+
/* Try replacing every occurrence of FROM in INSN with TO. After all
changes have been made, validate by seeing if INSN is still valid. */
rtx *result = 0;
rtx *this_result;
int i;
- char *fmt;
+ const char *fmt;
switch (code)
{
for (next = next_nonnote_insn (insn);
next != 0 && GET_CODE (next) != CODE_LABEL;
next = next_nonnote_insn (next))
- if (GET_RTX_CLASS (GET_CODE (next)) == 'i' && dead_or_set_p (next, dest))
+ if (INSN_P (next) && dead_or_set_p (next, dest))
{
for (link = LOG_LINKS (next); link; link = XEXP (link, 1))
if (XEXP (link, 0) == insn)
return 0;
if (CONSTANT_P (op))
- return ((GET_MODE (op) == VOIDmode || GET_MODE (op) == mode)
+ return ((GET_MODE (op) == VOIDmode || GET_MODE (op) == mode
+ || mode == VOIDmode)
#ifdef LEGITIMATE_PIC_OPERAND_P
&& (! flag_pic || LEGITIMATE_PIC_OPERAND_P (op))
#endif
if (code == MEM)
{
register rtx y = XEXP (op, 0);
+
if (! volatile_ok && MEM_VOLATILE_P (op))
return 0;
+
if (GET_CODE (y) == ADDRESSOF)
return 1;
+
/* Use the mem's mode, since it will be reloaded thus. */
mode = GET_MODE (op);
GO_IF_LEGITIMATE_ADDRESS (mode, y, win);
if (! reload_completed && GET_CODE (SUBREG_REG (op)) == MEM)
return general_operand (op, mode);
-#ifdef CLASS_CANNOT_CHANGE_SIZE
+#ifdef CLASS_CANNOT_CHANGE_MODE
if (GET_CODE (SUBREG_REG (op)) == REG
&& REGNO (SUBREG_REG (op)) < FIRST_PSEUDO_REGISTER
- && TEST_HARD_REG_BIT (reg_class_contents[(int) CLASS_CANNOT_CHANGE_SIZE],
- REGNO (SUBREG_REG (op)))
- && (GET_MODE_SIZE (mode)
- != GET_MODE_SIZE (GET_MODE (SUBREG_REG (op))))
+ && (TEST_HARD_REG_BIT
+ (reg_class_contents[(int) CLASS_CANNOT_CHANGE_MODE],
+ REGNO (SUBREG_REG (op))))
+ && CLASS_CANNOT_CHANGE_MODE_P (mode, GET_MODE (SUBREG_REG (op)))
&& GET_MODE_CLASS (GET_MODE (SUBREG_REG (op))) != MODE_COMPLEX_INT
&& GET_MODE_CLASS (GET_MODE (SUBREG_REG (op))) != MODE_COMPLEX_FLOAT)
return 0;
op = SUBREG_REG (op);
}
+ /* If we have an ADDRESSOF, consider it valid since it will be
+ converted into something that will not be a MEM. */
+ if (GET_CODE (op) == ADDRESSOF)
+ return 1;
+
/* We don't consider registers whose class is NO_REGS
to be a register operand. */
return (GET_CODE (op) == REG
|| REGNO_REG_CLASS (REGNO (op)) != NO_REGS));
}
+/* Return 1 for a register in Pmode; ignore the tested mode. */
+
+int
+pmode_register_operand (op, mode)
+ rtx op;
+ enum machine_mode mode ATTRIBUTE_UNUSED;
+{
+ return register_operand (op, Pmode);
+}
+
/* Return 1 if OP should match a MATCH_SCRATCH, i.e., if it is a SCRATCH
or a hard register. */
register rtx op;
enum machine_mode mode;
{
- return (GET_MODE (op) == mode
- && (GET_CODE (op) == SCRATCH
- || (GET_CODE (op) == REG
- && REGNO (op) < FIRST_PSEUDO_REGISTER)));
+ if (GET_MODE (op) != mode && mode != VOIDmode)
+ return 0;
+
+ return (GET_CODE (op) == SCRATCH
+ || (GET_CODE (op) == REG
+ && REGNO (op) < FIRST_PSEUDO_REGISTER));
}
/* Return 1 if OP is a valid immediate operand for mode MODE.
&& GET_MODE_CLASS (mode) != MODE_PARTIAL_INT)
return 0;
- return ((GET_MODE (op) == VOIDmode || GET_MODE (op) == mode)
+ return ((GET_MODE (op) == VOIDmode || GET_MODE (op) == mode
+ || mode == VOIDmode)
#ifdef LEGITIMATE_PIC_OPERAND_P
&& (! flag_pic || LEGITIMATE_PIC_OPERAND_P (op))
#endif
int
memory_address_p (mode, addr)
- enum machine_mode mode;
+ enum machine_mode mode ATTRIBUTE_UNUSED;
register rtx addr;
{
if (GET_CODE (addr) == ADDRESSOF)
asm_noperands (body)
rtx body;
{
- if (GET_CODE (body) == ASM_OPERANDS)
- /* No output operands: return number of input operands. */
- return ASM_OPERANDS_INPUT_LENGTH (body);
- if (GET_CODE (body) == SET && GET_CODE (SET_SRC (body)) == ASM_OPERANDS)
- /* Single output operand: BODY is (set OUTPUT (asm_operands ...)). */
- return ASM_OPERANDS_INPUT_LENGTH (SET_SRC (body)) + 1;
- else if (GET_CODE (body) == PARALLEL
- && GET_CODE (XVECEXP (body, 0, 0)) == SET
- && GET_CODE (SET_SRC (XVECEXP (body, 0, 0))) == ASM_OPERANDS)
+ switch (GET_CODE (body))
{
- /* Multiple output operands, or 1 output plus some clobbers:
- body is [(set OUTPUT (asm_operands ...))... (clobber (reg ...))...]. */
- int i;
- int n_sets;
-
- /* Count backwards through CLOBBERs to determine number of SETs. */
- for (i = XVECLEN (body, 0); i > 0; i--)
+ case ASM_OPERANDS:
+ /* No output operands: return number of input operands. */
+ return ASM_OPERANDS_INPUT_LENGTH (body);
+ case SET:
+ if (GET_CODE (SET_SRC (body)) == ASM_OPERANDS)
+ /* Single output operand: BODY is (set OUTPUT (asm_operands ...)). */
+ return ASM_OPERANDS_INPUT_LENGTH (SET_SRC (body)) + 1;
+ else
+ return -1;
+ case PARALLEL:
+ if (GET_CODE (XVECEXP (body, 0, 0)) == SET
+ && GET_CODE (SET_SRC (XVECEXP (body, 0, 0))) == ASM_OPERANDS)
{
- if (GET_CODE (XVECEXP (body, 0, i - 1)) == SET)
- break;
- if (GET_CODE (XVECEXP (body, 0, i - 1)) != CLOBBER)
- return -1;
- }
+ /* Multiple output operands, or 1 output plus some clobbers:
+ body is [(set OUTPUT (asm_operands ...))... (clobber (reg ...))...]. */
+ int i;
+ int n_sets;
- /* N_SETS is now number of output operands. */
- n_sets = i;
+ /* Count backwards through CLOBBERs to determine number of SETs. */
+ for (i = XVECLEN (body, 0); i > 0; i--)
+ {
+ if (GET_CODE (XVECEXP (body, 0, i - 1)) == SET)
+ break;
+ if (GET_CODE (XVECEXP (body, 0, i - 1)) != CLOBBER)
+ return -1;
+ }
- /* Verify that all the SETs we have
- came from a single original asm_operands insn
- (so that invalid combinations are blocked). */
- for (i = 0; i < n_sets; i++)
- {
- rtx elt = XVECEXP (body, 0, i);
- if (GET_CODE (elt) != SET)
- return -1;
- if (GET_CODE (SET_SRC (elt)) != ASM_OPERANDS)
- return -1;
- /* If these ASM_OPERANDS rtx's came from different original insns
- then they aren't allowed together. */
- if (ASM_OPERANDS_INPUT_VEC (SET_SRC (elt))
- != ASM_OPERANDS_INPUT_VEC (SET_SRC (XVECEXP (body, 0, 0))))
- return -1;
+ /* N_SETS is now number of output operands. */
+ n_sets = i;
+
+ /* Verify that all the SETs we have
+ came from a single original asm_operands insn
+ (so that invalid combinations are blocked). */
+ for (i = 0; i < n_sets; i++)
+ {
+ rtx elt = XVECEXP (body, 0, i);
+ if (GET_CODE (elt) != SET)
+ return -1;
+ if (GET_CODE (SET_SRC (elt)) != ASM_OPERANDS)
+ return -1;
+ /* If these ASM_OPERANDS rtx's came from different original insns
+ then they aren't allowed together. */
+ if (ASM_OPERANDS_INPUT_VEC (SET_SRC (elt))
+ != ASM_OPERANDS_INPUT_VEC (SET_SRC (XVECEXP (body, 0, 0))))
+ return -1;
+ }
+ return (ASM_OPERANDS_INPUT_LENGTH (SET_SRC (XVECEXP (body, 0, 0)))
+ + n_sets);
}
- return (ASM_OPERANDS_INPUT_LENGTH (SET_SRC (XVECEXP (body, 0, 0)))
- + n_sets);
- }
- else if (GET_CODE (body) == PARALLEL
- && GET_CODE (XVECEXP (body, 0, 0)) == ASM_OPERANDS)
- {
- /* 0 outputs, but some clobbers:
- body is [(asm_operands ...) (clobber (reg ...))...]. */
- int i;
+ else if (GET_CODE (XVECEXP (body, 0, 0)) == ASM_OPERANDS)
+ {
+ /* 0 outputs, but some clobbers:
+ body is [(asm_operands ...) (clobber (reg ...))...]. */
+ int i;
- /* Make sure all the other parallel things really are clobbers. */
- for (i = XVECLEN (body, 0) - 1; i > 0; i--)
- if (GET_CODE (XVECEXP (body, 0, i)) != CLOBBER)
- return -1;
+ /* Make sure all the other parallel things really are clobbers. */
+ for (i = XVECLEN (body, 0) - 1; i > 0; i--)
+ if (GET_CODE (XVECEXP (body, 0, i)) != CLOBBER)
+ return -1;
- return ASM_OPERANDS_INPUT_LENGTH (XVECEXP (body, 0, 0));
+ return ASM_OPERANDS_INPUT_LENGTH (XVECEXP (body, 0, 0));
+ }
+ else
+ return -1;
+ default:
+ return -1;
}
- else
- return -1;
}
/* Assuming BODY is an insn body that uses ASM_OPERANDS,
If MODES, OPERAND_LOCS, CONSTRAINTS or OPERANDS is 0,
we don't store that info. */
-char *
+const char *
decode_asm_operands (body, operands, operand_locs, constraints, modes)
rtx body;
rtx *operands;
{
register int i;
int noperands;
- char *template = 0;
+ const char *template = 0;
if (GET_CODE (body) == SET && GET_CODE (SET_SRC (body)) == ASM_OPERANDS)
{
while (*constraint)
{
- switch (*constraint++)
+ char c = *constraint++;
+ switch (c)
{
case '=':
case '+':
return 1;
break;
+ default:
+ /* For all other letters, we first check for a register class,
+ otherwise it is an EXTRA_CONSTRAINT. */
+ if (REG_CLASS_FROM_LETTER (c) != NO_REGS)
+ {
+ case 'r':
+ if (GET_MODE (op) == BLKmode)
+ break;
+ if (register_operand (op, VOIDmode))
+ return 1;
+ }
#ifdef EXTRA_CONSTRAINT
- case 'Q':
- if (EXTRA_CONSTRAINT (op, 'Q'))
- return 1;
- break;
- case 'R':
- if (EXTRA_CONSTRAINT (op, 'R'))
- return 1;
- break;
- case 'S':
- if (EXTRA_CONSTRAINT (op, 'S'))
- return 1;
- break;
- case 'T':
- if (EXTRA_CONSTRAINT (op, 'T'))
+ if (EXTRA_CONSTRAINT (op, c))
return 1;
- break;
- case 'U':
- if (EXTRA_CONSTRAINT (op, 'U'))
- return 1;
- break;
#endif
-
- case 'r':
- default:
- if (GET_MODE (op) == BLKmode)
- break;
- if (register_operand (op, VOIDmode))
- return 1;
break;
}
}
register rtx z;
rtx y1 = y;
rtx *y2;
- int (*addressp) () = (strictp ? strict_memory_address_p : memory_address_p);
+ int (*addressp) PARAMS ((enum machine_mode, rtx)) =
+ (strictp ? strict_memory_address_p : memory_address_p);
+ unsigned int mode_sz = GET_MODE_SIZE (mode);
if (CONSTANT_ADDRESS_P (y))
return 1;
if (mode_dependent_address_p (y))
return 0;
+ /* ??? How much offset does an offsettable BLKmode reference need?
+ Clearly that depends on the situation in which it's being used.
+ However, the current situation in which we test 0xffffffff is
+ less than ideal. Caveat user. */
+ if (mode_sz == 0)
+ mode_sz = BIGGEST_ALIGNMENT / BITS_PER_UNIT;
+
/* If the expression contains a constant term,
see if it remains valid when max possible offset is added. */
int good;
y1 = *y2;
- *y2 = plus_constant (*y2, GET_MODE_SIZE (mode) - 1);
+ *y2 = plus_constant (*y2, mode_sz - 1);
/* Use QImode because an odd displacement may be automatically invalid
for any wider mode. But it should be valid for a single byte. */
good = (*addressp) (QImode, y);
return good;
}
- if (ycode == PRE_DEC || ycode == PRE_INC
- || ycode == POST_DEC || ycode == POST_INC)
+ if (GET_RTX_CLASS (ycode) == 'a')
return 0;
/* The offset added here is chosen as the maximum offset that
of the specified mode. We assume that if Y and Y+c are
valid addresses then so is Y+d for all 0<d<c. */
- z = plus_constant_for_output (y, GET_MODE_SIZE (mode) - 1);
+ z = plus_constant_for_output (y, mode_sz - 1);
/* Use QImode because an odd displacement may be automatically invalid
for any wider mode. But it should be valid for a single byte. */
return 0;
}
-/* Given an operand OP that is a valid memory reference
- which satisfies offsettable_memref_p,
- return a new memory reference whose address has been adjusted by OFFSET.
- OFFSET should be positive and less than the size of the object referenced.
-*/
+/* Given an operand OP that is a valid memory reference which
+ satisfies offsettable_memref_p, return a new memory reference whose
+ address has been adjusted by OFFSET. OFFSET should be positive and
+ less than the size of the object referenced. */
rtx
adj_offsettable_operand (op, offset)
if (CONSTANT_ADDRESS_P (y))
{
- new = gen_rtx_MEM (GET_MODE (op), plus_constant_for_output (y, offset));
- RTX_UNCHANGING_P (new) = RTX_UNCHANGING_P (op);
+ new = gen_rtx_MEM (GET_MODE (op),
+ plus_constant_for_output (y, offset));
+ MEM_COPY_ATTRIBUTES (new, op);
return new;
}
}
new = gen_rtx_MEM (GET_MODE (op), plus_constant_for_output (y, offset));
- RTX_UNCHANGING_P (new) = RTX_UNCHANGING_P (op);
+ MEM_COPY_ATTRIBUTES (new, op);
return new;
}
abort ();
}
\f
-/* Analyze INSN and compute the variables recog_n_operands, recog_n_dups,
- recog_n_alternatives, recog_operand, recog_operand_loc, recog_constraints,
- recog_operand_mode, recog_dup_loc and recog_dup_num.
- If REGISTER_CONSTRAINTS is not defined, also compute
- recog_operand_address_p. */
+/* Like extract_insn, but save insn extracted and don't extract again, when
+ called again for the same insn expecting that recog_data still contain the
+ valid information. This is used primary by gen_attr infrastructure that
+ often does extract insn again and again. */
+void
+extract_insn_cached (insn)
+ rtx insn;
+{
+ if (recog_data.insn == insn && INSN_CODE (insn) >= 0)
+ return;
+ extract_insn (insn);
+ recog_data.insn = insn;
+}
+/* Do cached extract_insn, constrain_operand and complain about failures.
+ Used by insn_attrtab. */
+void
+extract_constrain_insn_cached (insn)
+ rtx insn;
+{
+ extract_insn_cached (insn);
+ if (which_alternative == -1
+ && !constrain_operands (reload_completed))
+ fatal_insn_not_found (insn);
+}
+/* Do cached constrain_operand and complain about failures. */
+int
+constrain_operands_cached (strict)
+ int strict;
+{
+ if (which_alternative == -1)
+ return constrain_operands (strict);
+ else
+ return 1;
+}
+\f
+/* Analyze INSN and fill in recog_data. */
+
void
extract_insn (insn)
rtx insn;
int noperands;
rtx body = PATTERN (insn);
- recog_n_operands = 0;
- recog_n_alternatives = 0;
- recog_n_dups = 0;
+ recog_data.insn = NULL;
+ recog_data.n_operands = 0;
+ recog_data.n_alternatives = 0;
+ recog_data.n_dups = 0;
+ which_alternative = -1;
switch (GET_CODE (body))
{
return;
case SET:
+ if (GET_CODE (SET_SRC (body)) == ASM_OPERANDS)
+ goto asm_insn;
+ else
+ goto normal_insn;
case PARALLEL:
+ if ((GET_CODE (XVECEXP (body, 0, 0)) == SET
+ && GET_CODE (SET_SRC (XVECEXP (body, 0, 0))) == ASM_OPERANDS)
+ || GET_CODE (XVECEXP (body, 0, 0)) == ASM_OPERANDS)
+ goto asm_insn;
+ else
+ goto normal_insn;
case ASM_OPERANDS:
- recog_n_operands = noperands = asm_noperands (body);
+ asm_insn:
+ recog_data.n_operands = noperands = asm_noperands (body);
if (noperands >= 0)
{
/* This insn is an `asm' with operands. */
abort ();
/* Now get the operand values and constraints out of the insn. */
- decode_asm_operands (body, recog_operand, recog_operand_loc,
- recog_constraints, recog_operand_mode);
+ decode_asm_operands (body, recog_data.operand,
+ recog_data.operand_loc,
+ recog_data.constraints,
+ recog_data.operand_mode);
if (noperands > 0)
{
- const char *p = recog_constraints[0];
- recog_n_alternatives = 1;
+ const char *p = recog_data.constraints[0];
+ recog_data.n_alternatives = 1;
while (*p)
- recog_n_alternatives += (*p++ == ',');
+ recog_data.n_alternatives += (*p++ == ',');
}
-#ifndef REGISTER_CONSTRAINTS
- bzero (recog_operand_address_p, sizeof recog_operand_address_p);
-#endif
break;
}
-
- /* FALLTHROUGH */
+ fatal_insn_not_found (insn);
default:
+ normal_insn:
/* Ordinary insn: recognize it, get the operands via insn_extract
and get the constraints. */
if (icode < 0)
fatal_insn_not_found (insn);
- recog_n_operands = noperands = insn_n_operands[icode];
- recog_n_alternatives = insn_n_alternatives[icode];
- recog_n_dups = insn_n_dups[icode];
+ recog_data.n_operands = noperands = insn_data[icode].n_operands;
+ recog_data.n_alternatives = insn_data[icode].n_alternatives;
+ recog_data.n_dups = insn_data[icode].n_dups;
insn_extract (insn);
for (i = 0; i < noperands; i++)
{
-#ifdef REGISTER_CONSTRAINTS
- recog_constraints[i] = insn_operand_constraint[icode][i];
-#else
- recog_operand_address_p[i] = insn_operand_address_p[icode][i];
-#endif
- recog_operand_mode[i] = insn_operand_mode[icode][i];
+ recog_data.constraints[i] = insn_data[icode].operand[i].constraint;
+ recog_data.operand_mode[i] = insn_data[icode].operand[i].mode;
+ /* VOIDmode match_operands gets mode from their real operand. */
+ if (recog_data.operand_mode[i] == VOIDmode)
+ recog_data.operand_mode[i] = GET_MODE (recog_data.operand[i]);
}
}
for (i = 0; i < noperands; i++)
- recog_op_type[i] = (recog_constraints[i][0] == '=' ? OP_OUT
- : recog_constraints[i][0] == '+' ? OP_INOUT
- : OP_IN);
+ recog_data.operand_type[i]
+ = (recog_data.constraints[i][0] == '=' ? OP_OUT
+ : recog_data.constraints[i][0] == '+' ? OP_INOUT
+ : OP_IN);
- if (recog_n_alternatives > MAX_RECOG_ALTERNATIVES)
+ if (recog_data.n_alternatives > MAX_RECOG_ALTERNATIVES)
abort ();
}
{
int i;
- for (i = 0; i < recog_n_operands; i++)
+ memset (recog_op_alt, 0, sizeof recog_op_alt);
+ for (i = 0; i < recog_data.n_operands; i++)
{
int j;
struct operand_alternative *op_alt;
- const char *p = recog_constraints[i];
+ const char *p = recog_data.constraints[i];
op_alt = recog_op_alt[i];
- for (j = 0; j < recog_n_alternatives; j++)
+ for (j = 0; j < recog_data.n_alternatives; j++)
{
op_alt[j].class = NO_REGS;
op_alt[j].constraint = p;
case 's': case 'i': case 'n':
case 'I': case 'J': case 'K': case 'L':
case 'M': case 'N': case 'O': case 'P':
-#ifdef EXTRA_CONSTRAINT
- case 'Q': case 'R': case 'S': case 'T': case 'U':
-#endif
/* These don't say anything we care about. */
break;
case '0': case '1': case '2': case '3': case '4':
case '5': case '6': case '7': case '8': case '9':
op_alt[j].matches = c - '0';
- op_alt[op_alt[j].matches].matched = i;
+ recog_op_alt[op_alt[j].matches][j].matched = i;
break;
case 'm':
break;
case 'p':
+ op_alt[j].is_address = 1;
op_alt[j].class = reg_class_subunion[(int) op_alt[j].class][(int) BASE_REG_CLASS];
break;
}
}
-#ifdef REGISTER_CONSTRAINTS
-
/* Check the operands of an insn against the insn's operand constraints
and return 1 if they are valid.
The information about the insn's operands, constraints, operand modes
struct funny_match funny_match[MAX_RECOG_OPERANDS];
int funny_match_index;
- if (recog_n_operands == 0 || recog_n_alternatives == 0)
+ which_alternative = 0;
+ if (recog_data.n_operands == 0 || recog_data.n_alternatives == 0)
return 1;
- for (c = 0; c < recog_n_operands; c++)
+ for (c = 0; c < recog_data.n_operands; c++)
{
- constraints[c] = recog_constraints[c];
+ constraints[c] = recog_data.constraints[c];
matching_operands[c] = -1;
}
- which_alternative = 0;
-
- while (which_alternative < recog_n_alternatives)
+ do
{
register int opno;
int lose = 0;
funny_match_index = 0;
- for (opno = 0; opno < recog_n_operands; opno++)
+ for (opno = 0; opno < recog_data.n_operands; opno++)
{
- register rtx op = recog_operand[opno];
+ register rtx op = recog_data.operand[opno];
enum machine_mode mode = GET_MODE (op);
register const char *p = constraints[opno];
int offset = 0;
while (*p && (c = *p++) != ',')
switch (c)
{
- case '?':
- case '!':
- case '*':
- case '%':
- case '=':
- case '+':
+ case '?': case '!': case '*': case '%':
+ case '=': case '+':
break;
case '#':
earlyclobber[opno] = 1;
break;
- case '0':
- case '1':
- case '2':
- case '3':
- case '4':
+ case '0': case '1': case '2': case '3': case '4':
+ case '5': case '6': case '7': case '8': case '9':
+
/* This operand must be the same as a previous one.
This kind of constraint is used for instructions such
as add when they take only two operands.
if (strict < 0)
val = 1;
else
- val = operands_match_p (recog_operand[c - '0'],
- recog_operand[opno]);
+ {
+ rtx op1 = recog_data.operand[c - '0'];
+ rtx op2 = recog_data.operand[opno];
+
+ /* A unary operator may be accepted by the predicate,
+ but it is irrelevant for matching constraints. */
+ if (GET_RTX_CLASS (GET_CODE (op1)) == '1')
+ op1 = XEXP (op1, 0);
+ if (GET_RTX_CLASS (GET_CODE (op2)) == '1')
+ op2 = XEXP (op2, 0);
+
+ val = operands_match_p (op1, op2);
+ }
matching_operands[opno] = c - '0';
matching_operands[c - '0'] = opno;
strictly valid, i.e., that all pseudos requiring hard regs
have gotten them. */
if (strict <= 0
- || (strict_memory_address_p (recog_operand_mode[opno],
+ || (strict_memory_address_p (recog_data.operand_mode[opno],
op)))
win = 1;
break;
win = 1;
break;
- case 'r':
- if (strict < 0
- || (strict == 0
- && GET_CODE (op) == REG
- && REGNO (op) >= FIRST_PSEUDO_REGISTER)
- || (strict == 0 && GET_CODE (op) == SCRATCH)
- || (GET_CODE (op) == REG
- && ((GENERAL_REGS == ALL_REGS
- && REGNO (op) < FIRST_PSEUDO_REGISTER)
- || reg_fits_class_p (op, GENERAL_REGS,
- offset, mode))))
- win = 1;
- break;
-
case 'X':
/* This is used for a MATCH_SCRATCH in the cases when
we don't actually need anything. So anything goes
win = 1;
break;
-#ifdef EXTRA_CONSTRAINT
- case 'Q':
- case 'R':
- case 'S':
- case 'T':
- case 'U':
- if (EXTRA_CONSTRAINT (op, c))
- win = 1;
- break;
-#endif
-
case 'V':
if (GET_CODE (op) == MEM
&& ((strict > 0 && ! offsettable_memref_p (op))
break;
default:
- if (strict < 0
- || (strict == 0
- && GET_CODE (op) == REG
- && REGNO (op) >= FIRST_PSEUDO_REGISTER)
- || (strict == 0 && GET_CODE (op) == SCRATCH)
- || (GET_CODE (op) == REG
- && reg_fits_class_p (op, REG_CLASS_FROM_LETTER (c),
- offset, mode)))
- win = 1;
+ {
+ enum reg_class class;
+
+ class = (c == 'r' ? GENERAL_REGS : REG_CLASS_FROM_LETTER (c));
+ if (class != NO_REGS)
+ {
+ if (strict < 0
+ || (strict == 0
+ && GET_CODE (op) == REG
+ && REGNO (op) >= FIRST_PSEUDO_REGISTER)
+ || (strict == 0 && GET_CODE (op) == SCRATCH)
+ || (GET_CODE (op) == REG
+ && reg_fits_class_p (op, class, offset, mode)))
+ win = 1;
+ }
+#ifdef EXTRA_CONSTRAINT
+ else if (EXTRA_CONSTRAINT (op, c))
+ win = 1;
+#endif
+ break;
+ }
}
constraints[opno] = p;
operand. */
if (strict > 0)
- for (eopno = 0; eopno < recog_n_operands; eopno++)
+ for (eopno = 0; eopno < recog_data.n_operands; eopno++)
/* Ignore earlyclobber operands now in memory,
because we would often report failure when we have
two memory operands, one of which was formerly a REG. */
if (earlyclobber[eopno]
- && GET_CODE (recog_operand[eopno]) == REG)
- for (opno = 0; opno < recog_n_operands; opno++)
- if ((GET_CODE (recog_operand[opno]) == MEM
- || recog_op_type[opno] != OP_OUT)
+ && GET_CODE (recog_data.operand[eopno]) == REG)
+ for (opno = 0; opno < recog_data.n_operands; opno++)
+ if ((GET_CODE (recog_data.operand[opno]) == MEM
+ || recog_data.operand_type[opno] != OP_OUT)
&& opno != eopno
/* Ignore things like match_operator operands. */
- && *recog_constraints[opno] != 0
+ && *recog_data.constraints[opno] != 0
&& ! (matching_operands[opno] == eopno
- && operands_match_p (recog_operand[opno],
- recog_operand[eopno]))
- && ! safe_from_earlyclobber (recog_operand[opno],
- recog_operand[eopno]))
+ && operands_match_p (recog_data.operand[opno],
+ recog_data.operand[eopno]))
+ && ! safe_from_earlyclobber (recog_data.operand[opno],
+ recog_data.operand[eopno]))
lose = 1;
if (! lose)
{
while (--funny_match_index >= 0)
{
- recog_operand[funny_match[funny_match_index].other]
- = recog_operand[funny_match[funny_match_index].this];
+ recog_data.operand[funny_match[funny_match_index].other]
+ = recog_data.operand[funny_match[funny_match_index].this];
}
return 1;
which_alternative++;
}
+ while (which_alternative < recog_data.n_alternatives);
+ which_alternative = -1;
/* If we are about to reject this, but we are not to test strictly,
try a very loose test. Only return failure if it fails also. */
if (strict == 0)
return 0;
}
-
-#endif /* REGISTER_CONSTRAINTS */
\f
-/* Do the splitting of insns in the block B. Only try to actually split if
- DO_SPLIT is true; otherwise, just remove nops. */
+/* Split all insns in the function. If UPD_LIFE, update life info after. */
void
-split_block_insns (b, do_split)
- int b;
- int do_split;
+split_all_insns (upd_life)
+ int upd_life;
{
- rtx insn, next;
+ sbitmap blocks;
+ int changed;
+ int i;
- for (insn = BLOCK_HEAD (b);; insn = next)
+ blocks = sbitmap_alloc (n_basic_blocks);
+ sbitmap_zero (blocks);
+ changed = 0;
+
+ for (i = n_basic_blocks - 1; i >= 0; --i)
{
- rtx set;
+ basic_block bb = BASIC_BLOCK (i);
+ rtx insn, next;
- /* Can't use `next_real_insn' because that
- might go across CODE_LABELS and short-out basic blocks. */
- next = NEXT_INSN (insn);
- if (GET_CODE (insn) != INSN)
+ for (insn = bb->head; insn ; insn = next)
{
- if (insn == BLOCK_END (b))
- break;
+ rtx set;
- continue;
- }
+ /* Can't use `next_real_insn' because that might go across
+ CODE_LABELS and short-out basic blocks. */
+ next = NEXT_INSN (insn);
+ if (! INSN_P (insn))
+ ;
- /* Don't split no-op move insns. These should silently disappear
- later in final. Splitting such insns would break the code
- that handles REG_NO_CONFLICT blocks. */
- set = single_set (insn);
- if (set && rtx_equal_p (SET_SRC (set), SET_DEST (set)))
- {
- if (insn == BLOCK_END (b))
- break;
+ /* Don't split no-op move insns. These should silently
+ disappear later in final. Splitting such insns would
+ break the code that handles REG_NO_CONFLICT blocks. */
- /* Nops get in the way while scheduling, so delete them now if
- register allocation has already been done. It is too risky
- to try to do this before register allocation, and there are
- unlikely to be very many nops then anyways. */
- if (reload_completed)
+ else if ((set = single_set (insn)) != NULL
+ && rtx_equal_p (SET_SRC (set), SET_DEST (set)))
{
+ /* Nops get in the way while scheduling, so delete them
+ now if register allocation has already been done. It
+ is too risky to try to do this before register
+ allocation, and there are unlikely to be very many
+ nops then anyways. */
+ if (reload_completed)
+ {
+ PUT_CODE (insn, NOTE);
+ NOTE_LINE_NUMBER (insn) = NOTE_INSN_DELETED;
+ NOTE_SOURCE_FILE (insn) = 0;
+ }
+ }
+ else
+ {
+ /* Split insns here to get max fine-grain parallelism. */
+ rtx first = PREV_INSN (insn);
+ rtx last = try_split (PATTERN (insn), insn, 1);
- PUT_CODE (insn, NOTE);
- NOTE_LINE_NUMBER (insn) = NOTE_INSN_DELETED;
- NOTE_SOURCE_FILE (insn) = 0;
+ if (last != insn)
+ {
+ SET_BIT (blocks, i);
+ changed = 1;
+
+ /* try_split returns the NOTE that INSN became. */
+ PUT_CODE (insn, NOTE);
+ NOTE_SOURCE_FILE (insn) = 0;
+ NOTE_LINE_NUMBER (insn) = NOTE_INSN_DELETED;
+
+ /* ??? Coddle to md files that generate subregs in post-
+ reload splitters instead of computing the proper
+ hard register. */
+ if (reload_completed && first != last)
+ {
+ first = NEXT_INSN (first);
+ while (1)
+ {
+ if (INSN_P (first))
+ cleanup_subreg_operands (first);
+ if (first == last)
+ break;
+ first = NEXT_INSN (first);
+ }
+ }
+
+ if (insn == bb->end)
+ {
+ bb->end = last;
+ break;
+ }
+ }
}
- continue;
+ if (insn == bb->end)
+ break;
}
- if (do_split)
+ /* ??? When we're called from just after reload, the CFG is in bad
+ shape, and we may have fallen off the end. This could be fixed
+ by having reload not try to delete unreachable code. Otherwise
+ assert we found the end insn. */
+ if (insn == NULL && upd_life)
+ abort ();
+ }
+
+ if (changed && upd_life)
+ {
+ compute_bb_for_insn (get_max_uid ());
+ count_or_remove_death_notes (blocks, 1);
+ update_life_info (blocks, UPDATE_LIFE_LOCAL, PROP_DEATH_NOTES);
+ }
+
+ sbitmap_free (blocks);
+}
+\f
+#ifdef HAVE_peephole2
+struct peep2_insn_data
+{
+ rtx insn;
+ regset live_before;
+};
+
+static struct peep2_insn_data peep2_insn_data[MAX_INSNS_PER_PEEP2 + 1];
+static int peep2_current;
+
+/* A non-insn marker indicating the last insn of the block.
+ The live_before regset for this element is correct, indicating
+ global_live_at_end for the block. */
+#define PEEP2_EOB pc_rtx
+
+/* Return the Nth non-note insn after `current', or return NULL_RTX if it
+ does not exist. Used by the recognizer to find the next insn to match
+ in a multi-insn pattern. */
+
+rtx
+peep2_next_insn (n)
+ int n;
+{
+ if (n >= MAX_INSNS_PER_PEEP2 + 1)
+ abort ();
+
+ n += peep2_current;
+ if (n >= MAX_INSNS_PER_PEEP2 + 1)
+ n -= MAX_INSNS_PER_PEEP2 + 1;
+
+ if (peep2_insn_data[n].insn == PEEP2_EOB)
+ return NULL_RTX;
+ return peep2_insn_data[n].insn;
+}
+
+/* Return true if REGNO is dead before the Nth non-note insn
+ after `current'. */
+
+int
+peep2_regno_dead_p (ofs, regno)
+ int ofs;
+ int regno;
+{
+ if (ofs >= MAX_INSNS_PER_PEEP2 + 1)
+ abort ();
+
+ ofs += peep2_current;
+ if (ofs >= MAX_INSNS_PER_PEEP2 + 1)
+ ofs -= MAX_INSNS_PER_PEEP2 + 1;
+
+ if (peep2_insn_data[ofs].insn == NULL_RTX)
+ abort ();
+
+ return ! REGNO_REG_SET_P (peep2_insn_data[ofs].live_before, regno);
+}
+
+/* Similarly for a REG. */
+
+int
+peep2_reg_dead_p (ofs, reg)
+ int ofs;
+ rtx reg;
+{
+ int regno, n;
+
+ if (ofs >= MAX_INSNS_PER_PEEP2 + 1)
+ abort ();
+
+ ofs += peep2_current;
+ if (ofs >= MAX_INSNS_PER_PEEP2 + 1)
+ ofs -= MAX_INSNS_PER_PEEP2 + 1;
+
+ if (peep2_insn_data[ofs].insn == NULL_RTX)
+ abort ();
+
+ regno = REGNO (reg);
+ n = HARD_REGNO_NREGS (regno, GET_MODE (reg));
+ while (--n >= 0)
+ if (REGNO_REG_SET_P (peep2_insn_data[ofs].live_before, regno + n))
+ return 0;
+ return 1;
+}
+
+/* Try to find a hard register of mode MODE, matching the register class in
+ CLASS_STR, which is available at the beginning of insn CURRENT_INSN and
+ remains available until the end of LAST_INSN. LAST_INSN may be NULL_RTX,
+ in which case the only condition is that the register must be available
+ before CURRENT_INSN.
+ Registers that already have bits set in REG_SET will not be considered.
+
+ If an appropriate register is available, it will be returned and the
+ corresponding bit(s) in REG_SET will be set; otherwise, NULL_RTX is
+ returned. */
+
+rtx
+peep2_find_free_register (from, to, class_str, mode, reg_set)
+ int from, to;
+ const char *class_str;
+ enum machine_mode mode;
+ HARD_REG_SET *reg_set;
+{
+ static int search_ofs;
+ enum reg_class class;
+ HARD_REG_SET live;
+ int i;
+
+ if (from >= MAX_INSNS_PER_PEEP2 + 1 || to >= MAX_INSNS_PER_PEEP2 + 1)
+ abort ();
+
+ from += peep2_current;
+ if (from >= MAX_INSNS_PER_PEEP2 + 1)
+ from -= MAX_INSNS_PER_PEEP2 + 1;
+ to += peep2_current;
+ if (to >= MAX_INSNS_PER_PEEP2 + 1)
+ to -= MAX_INSNS_PER_PEEP2 + 1;
+
+ if (peep2_insn_data[from].insn == NULL_RTX)
+ abort ();
+ REG_SET_TO_HARD_REG_SET (live, peep2_insn_data[from].live_before);
+
+ while (from != to)
+ {
+ HARD_REG_SET this_live;
+
+ if (++from >= MAX_INSNS_PER_PEEP2 + 1)
+ from = 0;
+ if (peep2_insn_data[from].insn == NULL_RTX)
+ abort ();
+ REG_SET_TO_HARD_REG_SET (this_live, peep2_insn_data[from].live_before);
+ IOR_HARD_REG_SET (live, this_live);
+ }
+
+ class = (class_str[0] == 'r' ? GENERAL_REGS
+ : REG_CLASS_FROM_LETTER (class_str[0]));
+
+ for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
+ {
+ int raw_regno, regno, success, j;
+
+ /* Distribute the free registers as much as possible. */
+ raw_regno = search_ofs + i;
+ if (raw_regno >= FIRST_PSEUDO_REGISTER)
+ raw_regno -= FIRST_PSEUDO_REGISTER;
+#ifdef REG_ALLOC_ORDER
+ regno = reg_alloc_order[raw_regno];
+#else
+ regno = raw_regno;
+#endif
+
+ /* Don't allocate fixed registers. */
+ if (fixed_regs[regno])
+ continue;
+ /* Make sure the register is of the right class. */
+ if (! TEST_HARD_REG_BIT (reg_class_contents[class], regno))
+ continue;
+ /* And can support the mode we need. */
+ if (! HARD_REGNO_MODE_OK (regno, mode))
+ continue;
+ /* And that we don't create an extra save/restore. */
+ if (! call_used_regs[regno] && ! regs_ever_live[regno])
+ continue;
+ /* And we don't clobber traceback for noreturn functions. */
+ if ((regno == FRAME_POINTER_REGNUM || regno == HARD_FRAME_POINTER_REGNUM)
+ && (! reload_completed || frame_pointer_needed))
+ continue;
+
+ success = 1;
+ for (j = HARD_REGNO_NREGS (regno, mode) - 1; j >= 0; j--)
+ {
+ if (TEST_HARD_REG_BIT (*reg_set, regno + j)
+ || TEST_HARD_REG_BIT (live, regno + j))
+ {
+ success = 0;
+ break;
+ }
+ }
+ if (success)
{
- /* Split insns here to get max fine-grain parallelism. */
- rtx first = PREV_INSN (insn);
- rtx notes = REG_NOTES (insn);
- rtx last = try_split (PATTERN (insn), insn, 1);
+ for (j = HARD_REGNO_NREGS (regno, mode) - 1; j >= 0; j--)
+ SET_HARD_REG_BIT (*reg_set, regno + j);
- if (last != insn)
+ /* Start the next search with the next register. */
+ if (++raw_regno >= FIRST_PSEUDO_REGISTER)
+ raw_regno = 0;
+ search_ofs = raw_regno;
+
+ return gen_rtx_REG (mode, regno);
+ }
+ }
+
+ search_ofs = 0;
+ return NULL_RTX;
+}
+
+/* Perform the peephole2 optimization pass. */
+
+void
+peephole2_optimize (dump_file)
+ FILE *dump_file ATTRIBUTE_UNUSED;
+{
+ regset_head rs_heads[MAX_INSNS_PER_PEEP2 + 2];
+ rtx insn, prev;
+ regset live;
+ int i, b;
+#ifdef HAVE_conditional_execution
+ sbitmap blocks;
+ int changed;
+#endif
+
+ /* Initialize the regsets we're going to use. */
+ for (i = 0; i < MAX_INSNS_PER_PEEP2 + 1; ++i)
+ peep2_insn_data[i].live_before = INITIALIZE_REG_SET (rs_heads[i]);
+ live = INITIALIZE_REG_SET (rs_heads[i]);
+
+#ifdef HAVE_conditional_execution
+ blocks = sbitmap_alloc (n_basic_blocks);
+ sbitmap_zero (blocks);
+ changed = 0;
+#else
+ count_or_remove_death_notes (NULL, 1);
+#endif
+
+ for (b = n_basic_blocks - 1; b >= 0; --b)
+ {
+ basic_block bb = BASIC_BLOCK (b);
+ struct propagate_block_info *pbi;
+
+ /* Indicate that all slots except the last holds invalid data. */
+ for (i = 0; i < MAX_INSNS_PER_PEEP2; ++i)
+ peep2_insn_data[i].insn = NULL_RTX;
+
+ /* Indicate that the last slot contains live_after data. */
+ peep2_insn_data[MAX_INSNS_PER_PEEP2].insn = PEEP2_EOB;
+ peep2_current = MAX_INSNS_PER_PEEP2;
+
+ /* Start up propagation. */
+ COPY_REG_SET (live, bb->global_live_at_end);
+ COPY_REG_SET (peep2_insn_data[MAX_INSNS_PER_PEEP2].live_before, live);
+
+#ifdef HAVE_conditional_execution
+ pbi = init_propagate_block_info (bb, live, NULL, NULL, 0);
+#else
+ pbi = init_propagate_block_info (bb, live, NULL, NULL, PROP_DEATH_NOTES);
+#endif
+
+ for (insn = bb->end; ; insn = prev)
+ {
+ prev = PREV_INSN (insn);
+ if (INSN_P (insn))
{
- /* try_split returns the NOTE that INSN became. */
- first = NEXT_INSN (first);
-#ifdef INSN_SCHEDULING
- update_flow_info (notes, first, last, insn);
-#endif
- PUT_CODE (insn, NOTE);
- NOTE_SOURCE_FILE (insn) = 0;
- NOTE_LINE_NUMBER (insn) = NOTE_INSN_DELETED;
- if (insn == BLOCK_HEAD (b))
- BLOCK_HEAD (b) = first;
- if (insn == BLOCK_END (b))
+ rtx try;
+ int match_len;
+
+ /* Record this insn. */
+ if (--peep2_current < 0)
+ peep2_current = MAX_INSNS_PER_PEEP2;
+ peep2_insn_data[peep2_current].insn = insn;
+ propagate_one_insn (pbi, insn);
+ COPY_REG_SET (peep2_insn_data[peep2_current].live_before, live);
+
+ /* Match the peephole. */
+ try = peephole2_insns (PATTERN (insn), insn, &match_len);
+ if (try != NULL)
{
- BLOCK_END (b) = last;
- break;
+ i = match_len + peep2_current;
+ if (i >= MAX_INSNS_PER_PEEP2 + 1)
+ i -= MAX_INSNS_PER_PEEP2 + 1;
+
+ /* Replace the old sequence with the new. */
+ flow_delete_insn_chain (insn, peep2_insn_data[i].insn);
+ try = emit_insn_after (try, prev);
+
+ /* Adjust the basic block boundaries. */
+ if (peep2_insn_data[i].insn == bb->end)
+ bb->end = try;
+ if (insn == bb->head)
+ bb->head = NEXT_INSN (prev);
+
+#ifdef HAVE_conditional_execution
+ /* With conditional execution, we cannot back up the
+ live information so easily, since the conditional
+ death data structures are not so self-contained.
+ So record that we've made a modification to this
+ block and update life information at the end. */
+ SET_BIT (blocks, b);
+ changed = 1;
+
+ for (i = 0; i < MAX_INSNS_PER_PEEP2 + 1; ++i)
+ peep2_insn_data[i].insn = NULL_RTX;
+ peep2_insn_data[peep2_current].insn = PEEP2_EOB;
+#else
+ /* Back up lifetime information past the end of the
+ newly created sequence. */
+ if (++i >= MAX_INSNS_PER_PEEP2 + 1)
+ i = 0;
+ COPY_REG_SET (live, peep2_insn_data[i].live_before);
+
+ /* Update life information for the new sequence. */
+ do
+ {
+ if (INSN_P (try))
+ {
+ if (--i < 0)
+ i = MAX_INSNS_PER_PEEP2;
+ peep2_insn_data[i].insn = try;
+ propagate_one_insn (pbi, try);
+ COPY_REG_SET (peep2_insn_data[i].live_before, live);
+ }
+ try = PREV_INSN (try);
+ }
+ while (try != prev);
+
+ /* ??? Should verify that LIVE now matches what we
+ had before the new sequence. */
+
+ peep2_current = i;
+#endif
}
}
+
+ if (insn == bb->head)
+ break;
}
- if (insn == BLOCK_END (b))
- break;
+ free_propagate_block_info (pbi);
}
+
+ for (i = 0; i < MAX_INSNS_PER_PEEP2 + 1; ++i)
+ FREE_REG_SET (peep2_insn_data[i].live_before);
+ FREE_REG_SET (live);
+
+#ifdef HAVE_conditional_execution
+ count_or_remove_death_notes (blocks, 1);
+ update_life_info (blocks, UPDATE_LIFE_LOCAL, PROP_DEATH_NOTES);
+ sbitmap_free (blocks);
+#endif
}
+#endif /* HAVE_peephole2 */