#!/bin/sh
# Construct makefile for libgcc.
-# Copyright (C) 2000, 2002 Free Software Foundation, Inc.
+# Copyright (C) 2000, 2002, 2003 Free Software Foundation, Inc.
#
# This file is part of GCC.
#
# objext
# LIB1ASMFUNCS
-# LIB2FUNCS_1
-# LIB2FUNCS_2
# LIB2FUNCS_ST
+# LIBGCOV
# LIB2ADD
# LIB2ADD_ST
# LIB2ADDEH
+# LIB2ADDEHSTATIC
+# LIB2ADDEHSHARED
# LIB2ADDEHDEP
+# LIBUNWIND
+# LIBUNWINDDEP
+# SHLIBUNWIND_LINK
+# SHLIBUNWIND_INSTALL
# FPBIT
# FPBIT_FUNCS
# LIB2_DIVMOD_FUNCS
# DPBIT
# DPBIT_FUNCS
+# TPBIT
+# TPBIT_FUNCS
# LIBGCC
# MULTILIBS
# EXTRA_MULTILIB_PARTS
# SHLIB_LINK
# SHLIB_MULTILIB
# SHLIB_MKMAP
+# SHLIB_MKMAP_OPTS
# SHLIB_MAPFILES
# SHLIB_NM_FLAGS
# SHLIB_INSTALL
+# MULTILIB_OSDIRNAMES
# Make needs VPATH to be literal.
echo 'srcdir = @srcdir@'
echo 'force:'
echo
+# Library members defined in libgcc2.c.
+lib2funcs='_muldi3 _negdi2 _lshrdi3 _ashldi3 _ashrdi3
+ _cmpdi2 _ucmpdi2 _floatdidf _floatdisf _fixunsdfsi _fixunssfsi
+ _fixunsdfdi _fixdfdi _fixunssfdi _fixsfdi _fixxfdi _fixunsxfdi
+ _floatdixf _fixunsxfsi _fixtfdi _fixunstfdi _floatditf _clear_cache
+ _enable_execute_stack _trampoline __main _absvsi2 _absvdi2 _addvsi3
+ _addvdi3 _subvsi3 _subvdi3 _mulvsi3 _mulvdi3 _negvsi2 _negvdi2 _ctors
+ _ffssi2 _ffsdi2 _clz _clzsi2 _clzdi2 _ctzsi2 _ctzdi2 _popcount_tab
+ _popcountsi2 _popcountdi2 _paritysi2 _paritydi2'
+
# Disable SHLIB_LINK if shared libgcc not enabled.
if [ "@enable_shared@" = "no" ]; then
SHLIB_LINK=""
AR_EXTRACT_FOR_TARGET="$(AR_EXTRACT_FOR_TARGET)" \
AR_FLAGS_FOR_TARGET="$(AR_FLAGS_FOR_TARGET)" \
CC="$(CC)" CFLAGS="$(CFLAGS)" \
- HOST_PREFIX="$(HOST_PREFIX)" \
- HOST_PREFIX_1="$(HOST_PREFIX_1)" \
+ BUILD_PREFIX="$(BUILD_PREFIX)" \
+ BUILD_PREFIX_1="$(BUILD_PREFIX_1)" \
LANGUAGES="$(LANGUAGES)"'
+# Generic dependencies for libgcc
+libgcc_dep='$(CONFIG_H) coretypes.h $(TM_H) $(MACHMODE_H) longlong.h config.status stmp-int-hdrs tsystem.h'
+
# Dependencies for libgcc2.c
-libgcc2_c_dep='stmp-dirs $(srcdir)/libgcc2.c $(CONFIG_H) $(MACHMODE_H) longlong.h gbl-ctors.h config.status stmp-int-hdrs tsystem.h'" $LIB2ADDEHDEP"
+libgcc2_c_dep='stmp-dirs $(srcdir)/libgcc2.c gbl-ctors.h'" $libgcc_dep"
+
+# Dependencies for libgcov.c
+libgcov_c_dep='stmp-dirs $(srcdir)/libgcov.c $(srcdir)/gcov-io.h $(srcdir)/gcov-io.c gcov-iov.h'" $libgcc_dep"
# Dependencies for fp-bit.c
fpbit_c_dep='stmp-dirs config.status tsystem.h'
echo " $gcc_compile" $flags -DL$name -xassembler-with-cpp \
-c '$(srcdir)/config/$(LIB1ASMSRC)' -o $out
- # Remove any objects from LIB2FUNCS and LIB2_DIVMOD_FUNCS that are
+ # Remove any objects from lib2funcs and LIB2_DIVMOD_FUNCS that are
# defined as optimized assembly code in LIB1ASMFUNCS.
- LIB2FUNCS_1=`echo $LIB2FUNCS_1 | sed -e 's/^'$name' //' \
- -e 's/ '$name' / /' \
- -e 's/ '$name'$//'`
- LIB2FUNCS_2=`echo $LIB2FUNCS_2 | sed -e 's/^'$name' //' \
- -e 's/ '$name' / /' \
- -e 's/ '$name'$//'`
+ lib2funcs=`echo $lib2funcs | sed -e 's/^'$name' //' \
+ -e 's/ '$name' / /' \
+ -e 's/ '$name'$//'`
LIB2_DIVMOD_FUNCS=`echo $LIB2_DIVMOD_FUNCS | sed -e 's/^'$name' //' \
-e 's/ '$name' / /' \
-e 's/ '$name'$//'`
libgcc2_objs=""
libgcc2_st_objs=""
-libgcc2_eh_objs=""
+libgcc2_eh_static_objs=""
+libgcc2_eh_shared_objs=""
-for name in $LIB2FUNCS_1 $LIB2FUNCS_2; do
+for name in $lib2funcs; do
for ml in $MULTILIBS; do
dir=`echo ${ml} | sed -e 's/;.*$//' -e 's/=/$(EQ)/g'`
flags=`echo ${ml} | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`;
out="libgcc/${dir}/${name}${objext}"
echo $out: $libgcc2_c_dep
- echo " $gcc_compile" '$(MAYBE_USE_COLLECT2)' $flags -DL$name \
+ echo " $gcc_compile" $flags -DL$name \
-c '$(srcdir)/libgcc2.c' -o $out
done
libgcc2_objs="$libgcc2_objs ${name}${objext}"
out="libgcc/${dir}/${name}${objext}"
echo $out: $libgcc2_c_dep
- echo " $gcc_compile" '$(MAYBE_USE_COLLECT2)' $flags -DL$name \
+ echo " $gcc_compile" $flags -DL$name \
-c '$(srcdir)/libgcc2.c' -o $out
done
libgcc2_st_objs="$libgcc2_st_objs ${name}${objext}"
out="libgcc/${dir}/${name}${objext}"
echo $out: $libgcc2_c_dep
- echo " $gcc_compile" '$(MAYBE_USE_COLLECT2)' $flags -DL$name \
+ echo " $gcc_compile" $flags -DL$name \
-c '$(srcdir)/libgcc2.c' -fexceptions -fnon-call-exceptions -o $out
done
libgcc2_objs="$libgcc2_objs ${name}${objext}"
done
fi
+if [ "$TPBIT" ]; then
+ for name in $TPBIT_FUNCS; do
+ for ml in $MULTILIBS; do
+ dir=`echo ${ml} | sed -e 's/;.*$//' -e 's/=/$(EQ)/g'`
+ flags=`echo ${ml} | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`;
+ out="libgcc/${dir}/${name}${objext}"
+
+ echo $out: $TPBIT $fpbit_c_dep
+ echo " $gcc_compile" -DFINE_GRAINED_LIBRARIES $flags -DL$name \
+ -c $TPBIT -o $out
+ done
+ libgcc2_objs="$libgcc2_objs ${name}${objext}"
+ done
+fi
+
for file in $LIB2ADD; do
name=`echo $file | sed -e 's/[.][cSo]$//' -e 's/[.]asm$//' -e 's/[.]txt$//'`
oname=`echo $name | sed -e 's,.*/,,'`
flags="$flags -xassembler-with-cpp"
fi
- echo $out: stmp-dirs $file
+ echo $out: stmp-dirs $file $libgcc_dep
echo " $gcc_compile" $flags -c $file -o $out
done
libgcc2_objs="$libgcc2_objs ${oname}${objext}"
flags="$flags -xassembler-with-cpp"
fi
- echo $out: stmp-dirs $file
+ echo $out: stmp-dirs $file $LIB2ADDEHDEP $libgcc_dep
echo " $gcc_compile" $flags -fexceptions -c $file -o $out
done
- if [ "$SHLIB_LINK" ]; then
- libgcc2_eh_objs="$libgcc2_eh_objs ${oname}${objext}"
- else
+ if [ -z "$SHLIB_LINK" ]; then
libgcc2_objs="$libgcc2_objs ${oname}${objext}"
fi
done
+if [ "$SHLIB_LINK" ]; then
+ # Those should be in libgcc_eh.a.
+ for file in $LIB2ADDEHSTATIC; do
+ name=`echo $file | sed -e 's/[.][cSo]$//' -e 's/[.]asm$//' -e 's/[.]txt$//'`
+ oname=`echo $name | sed -e 's,.*/,,'`
+ libgcc2_eh_static_objs="$libgcc2_eh_static_objs ${oname}${objext}"
+ done
+
+ # Those should be in libgcc.so.
+ for file in $LIB2ADDEHSHARED; do
+ name=`echo $file | sed -e 's/[.][cSo]$//' -e 's/[.]asm$//' -e 's/[.]txt$//'`
+ oname=`echo $name | sed -e 's,.*/,,'`
+ libgcc2_eh_shared_objs="$libgcc2_eh_shared_objs ${oname}${objext}"
+ done
+fi
+
for file in $LIB2ADD_ST; do
name=`echo $file | sed -e 's/[.][cSo]$//' -e 's/[.]asm$//' -e 's/[.]txt$//'`
oname=`echo $name | sed -e 's,.*/,,'`
flags="$flags -xassembler-with-cpp"
fi
- echo $out: stmp-dirs $file
+ echo $out: stmp-dirs $file $libgcc_dep
echo " $gcc_compile" $flags -c $file -o $out
done
libgcc2_st_objs="$libgcc2_st_objs ${oname}${objext}"
done
+if [ "$LIBUNWIND" ]; then
+ libunwind_static_objs=""
+ libunwind_shared_objs=""
+ for file in $LIBUNWIND; do
+ name=`echo $file | sed -e 's/[.][cSo]$//' -e 's/[.]asm$//' -e 's/[.]txt$//'`
+ oname=`echo $name | sed -e 's,.*/,,'`
+
+ for ml in $MULTILIBS; do
+ dir=`echo ${ml} | sed -e 's/;.*$//' -e 's/=/$(EQ)/g'`
+ flags=`echo ${ml} | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`;
+ out="libgcc/${dir}/${oname}${objext}"
+ if [ ${name}.asm = ${file} ]; then
+ flags="$flags -xassembler-with-cpp"
+ fi
+
+ echo $out: stmp-dirs $file $LIBUNWINDDEP
+ echo " $gcc_compile" $flags -fexceptions -c $file -o $out
+ echo ${out}s: stmp-dirs $file $LIBUNWINDDEP
+ echo " $gcc_compile" $flags -fexceptions -DSHARED -c $file -o ${out}s
+ done
+ libunwind_static_objs="$libunwind_static_objs ${oname}${objext}"
+ libunwind_shared_objs="$libunwind_shared_objs ${oname}${objext}s"
+ done
+fi
+
+#
+# build libgcov components
+#
+
+libgcov_objs=""
+
+for name in $LIBGCOV; do
+ for ml in $MULTILIBS; do
+ dir=`echo ${ml} | sed -e 's/;.*$//' -e 's/=/$(EQ)/g'`
+ flags=`echo ${ml} | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`;
+ out="libgcc/${dir}/${name}${objext}"
+
+ echo $out: $libgcov_c_dep
+ echo " $gcc_compile" $flags -DL$name \
+ -c '$(srcdir)/libgcov.c' -o $out
+ done
+ libgcov_objs="$libgcov_objs ${name}${objext}"
+done
+
# SHLIB_MKMAP
+# SHLIB_MKMAP_OPTS
# SHLIB_MAPFILES
for ml in $MULTILIBS; do
dir=`echo ${ml} | sed -e 's/;.*$//' -e 's/=/$(EQ)/g'`
flags=`echo ${ml} | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`;
libgcc_objs=""
- libgcc_eh_objs=""
+ libgcc_eh_static_objs=""
+ libgcc_eh_shared_objs=""
for o in $libgcc1_objs; do
libgcc_objs="$libgcc_objs libgcc/${dir}/$o"
done
for o in $libgcc2_objs; do
libgcc_objs="$libgcc_objs libgcc/${dir}/$o"
done
- for o in $libgcc2_eh_objs; do
- libgcc_eh_objs="$libgcc_eh_objs libgcc/${dir}/$o"
+ for o in $libgcc2_eh_static_objs; do
+ libgcc_eh_static_objs="$libgcc_eh_static_objs libgcc/${dir}/$o"
done
- libgcc_sh_objs="$libgcc_objs $libgcc_eh_objs"
+ for o in $libgcc2_eh_shared_objs; do
+ libgcc_eh_shared_objs="$libgcc_eh_shared_objs libgcc/${dir}/$o"
+ done
+ libgcc_sh_objs="$libgcc_objs $libgcc_eh_shared_objs"
shlib_deps="$libgcc_sh_objs"
libgcc_st_objs=""
libgcc_st_objs="$libgcc_st_objs libgcc/${dir}/$o"
done
- if [ "$SHLIB_LINK" -a "$SHLIB_MKMAP" -a -z "$mapfile" ]; then
- mapfile="libgcc.map"
- echo ""
- echo "${mapfile}: $SHLIB_MKMAP $SHLIB_MAPFILES $libgcc_sh_objs"
- echo ' { $(NM_FOR_TARGET)'" $SHLIB_NM_FLAGS $libgcc_sh_objs; echo %%; cat $SHLIB_MAPFILES; } | "'$(AWK)'" -f $SHLIB_MKMAP > "'tmp-$@'
- echo ' mv tmp-$@ $@'
+ libgcov_a_objs=""
+ for o in $libgcov_objs; do
+ libgcov_a_objs="$libgcov_a_objs libgcc/${dir}/$o"
+ done
+
+ if [ "$LIBUNWIND" ]; then
+ libunwind_a_objs=""
+ for o in $libunwind_static_objs; do
+ libunwind_a_objs="$libunwind_a_objs libgcc/${dir}/$o"
+ done
+ libunwind_sh_objs=""
+ for o in $libunwind_shared_objs; do
+ libunwind_sh_objs="$libunwind_sh_objs libgcc/${dir}/$o"
+ done
+ shlibunwind_deps="$libunwind_sh_objs"
+ fi
+
+ if [ "$SHLIB_LINK" -a "$SHLIB_MKMAP" ]; then
+ mapfile="libgcc/${dir}/libgcc.map"
+ tmpmapfile="libgcc/${dir}/tmp-libgcc.map"
+ # This uses a here document instead of echos because some shells
+ # will convert the \1 in the second sed command to a control-A.
+ # The behavior of here documents is more predictable.
+ cat <<EOF
+
+${mapfile}: $SHLIB_MKMAP $SHLIB_MAPFILES $libgcc_sh_objs
+ { \$(NM_FOR_TARGET) $SHLIB_NM_FLAGS $libgcc_sh_objs; echo %%; \\
+ cat $SHLIB_MAPFILES \\
+ | sed -e '/^[ ]*#/d' \\
+ -e 's/^%\(if\|else\|elif\|endif\|define\)/#\1/' \\
+ | $gcc_compile $flags -E -xassembler-with-cpp -; \\
+ } | \$(AWK) -f $SHLIB_MKMAP $SHLIB_MKMAP_OPTS > ${tmpmapfile}
+ mv '$tmpmapfile' \$@
+EOF
fi
shlib_deps="$shlib_deps $mapfile"
if [ "@libgcc_visibility@" = yes -a "$SHLIB_LINK" ]; then
libgcc_a_objs=
echo ""
+ echo "libgcc/${dir}/stacknote.s: stmp-dirs"
+ echo ' @( echo | $(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) '${flags}' -S -o - -xc - | grep .note.GNU-stack || : ) > $@.tmp'
+ echo ' @mv -f $@.tmp $@'
+ echo ""
for o in $libgcc_objs $libgcc_st_objs; do
# .oS objects will have all non-local symbol definitions .hidden
oS=`echo ${o} | sed s~${objext}'$~.oS~g'`
- echo "${oS}: stmp-dirs ${o}"
- echo ' @$(NM_FOR_TARGET) '${SHLIB_NM_FLAGS} ${o}' | $(AWK) '\''NF == 3 { print "\t.hidden", $$3 }'\'' | $(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) '${flags}' -r -nostdinc -nostdlib -o $@ '${o}' -xassembler -'
+ echo "${oS}: stmp-dirs libgcc/${dir}/stacknote.s ${o}"
+ # non-GNU nm emits three fields even for undefined and typeless symbols,
+ # so explicitly omit them
+ echo ' ( $(NM_FOR_TARGET) '${SHLIB_NM_FLAGS} ${o}' | $(AWK) '\''NF == 3 && $$2 !~ /^[UN]$$/ { print "\t.hidden", $$3 }'\''; cat libgcc/${dir}/stacknote.s ) | $(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) '${flags}' -r -nostdinc -nostdlib -o $@ '${o}' -xassembler -'
libgcc_a_objs="${libgcc_a_objs} ${oS}"
done
fi
+ # Each of these .a files depends on stmp-dirs. It would seem that
+ # this dependency is redundant, since each of the object files
+ # itself depends on stmp-dirs. However, it is possible that there
+ # are in fact no object files. In that case, the stmp-dirs
+ # dependency is required; the directory containing the archive must
+ # exist before the archive itself can be created.
echo ""
- echo "${dir}/libgcc.a: $libgcc_a_objs"
+ echo "${dir}/libgcc.a: stmp-dirs $libgcc_a_objs"
echo " -rm -rf ${dir}/libgcc.a"
echo ' $(AR_CREATE_FOR_TARGET)' ${dir}/libgcc.a $libgcc_a_objs
- echo ' if $(RANLIB_TEST_FOR_TARGET) ; then' \\
- echo ' $(RANLIB_FOR_TARGET)' ${dir}/libgcc.a ';' \\
- echo ' else true; fi;'
+ echo ' $(RANLIB_FOR_TARGET)' ${dir}/libgcc.a
+
+ echo ""
+ echo "${dir}/libgcov.a: stmp-dirs $libgcov_a_objs"
+ echo " -rm -rf ${dir}/libgcov.a"
+ echo ' $(AR_CREATE_FOR_TARGET)' ${dir}/libgcov.a $libgcov_a_objs
+ echo ' $(RANLIB_FOR_TARGET)' ${dir}/libgcov.a
+
+ if [ "$LIBUNWIND" ]; then
+ echo ""
+ echo "${dir}/libunwind.a: stmp-dirs $libunwind_a_objs"
+ echo " -rm -rf ${dir}/libunwind.a"
+ echo ' $(AR_CREATE_FOR_TARGET)' ${dir}/libunwind.a $libunwind_a_objs
+ echo ' $(RANLIB_FOR_TARGET)' ${dir}/libunwind.a
+ echo ""
+ echo "${dir}/libgcc.a: ${dir}/libunwind.a"
+ fi
if [ "$SHLIB_LINK" ]; then
echo ""
- echo "${dir}/libgcc_eh.a: $libgcc_eh_objs"
+ echo "${dir}/libgcc_eh.a: stmp-dirs $libgcc_eh_static_objs"
echo " -rm -rf ${dir}/libgcc_eh.a"
- echo ' $(AR_CREATE_FOR_TARGET)' ${dir}/libgcc_eh.a $libgcc_eh_objs
- echo ' if $(RANLIB_TEST_FOR_TARGET) ; then' \\
- echo ' $(RANLIB_FOR_TARGET)' ${dir}/libgcc_eh.a ';' \\
- echo ' else true; fi;'
+ echo ' $(AR_CREATE_FOR_TARGET)' ${dir}/libgcc_eh.a $libgcc_eh_static_objs
+ echo ' $(RANLIB_FOR_TARGET)' ${dir}/libgcc_eh.a
if [ -z "$SHLIB_MULTILIB" ]; then
- if [ "$dir" = "." ]; then
- shlib_base_name="libgcc_s";
+ if [ "$dir" = . ]; then
+ shlib_base_name=libgcc_s
+ shlibunwind_base_name=libunwind
else
shlib_base_name=libgcc_s_`echo $dir | sed s,/,_,g`
+ shlibunwind_base_name=libunwind_`echo $dir | sed s,/,_,g`
+ fi
+ shlib_so_name="$shlib_base_name"
+ shlibunwind_so_name="$shlibunwind_base_name"
+ if [ "$LIBUNWIND" ]; then
+ shlib_deps="$shlib_deps ${dir}/${shlibunwind_base_name}${SHLIB_EXT}"
+ fi
+ shlib_dir=
+ shlib_slibdir_qual=
+ if [ -n "$MULTILIB_OSDIRNAMES" ]; then
+ if [ "$dir" != . ]; then
+ gcc_multilib_dir=`./xgcc -B./ $flags --print-multi-directory`
+ os_multilib_dir=`./xgcc -B./ $flags --print-multi-os-directory`
+ shlib_dir="$dir"/
+ gcc_multilib_sup=`echo $gcc_multilib_dir | sed 's~^[^/]*/~~'`
+ os_multilib_base=`echo $os_multilib_dir | sed -n "s~/${gcc_multilib_sup}\$~~p"`
+ if [ -z "$os_multilib_base" ]; then
+ shlib_so_name=libgcc_s
+ shlibunwind_so_name=libunwind
+ if [ "$os_multilib_dir" != "." ]; then
+ shlib_slibdir_qual="/$os_multilib_dir"
+ fi
+ else
+ shlib_so_name=libgcc_s_`echo $gcc_multilib_sup | sed s,/,_,g`
+ shlibunwind_so_name=libunwind_`echo $gcc_multilib_sup | sed s,/,_,g`
+ shlib_slibdir_qual="/$os_multilib_base"
+ fi
+ fi
fi
echo ""
echo "${dir}/${shlib_base_name}${SHLIB_EXT}: $shlib_deps"
-e "s%@multilib_dir@%$dir%g" \
-e "s%@shlib_objs@%$libgcc_sh_objs%g" \
-e "s%@shlib_base_name@%$shlib_base_name%g" \
- -e "s%@shlib_map_file@%$mapfile%g"
+ -e "s%@shlib_map_file@%$mapfile%g" \
+ -e "s%@shlib_so_name@%$shlib_so_name%g" \
+ -e "s%@shlib_dir@%$shlib_dir%g" \
+ -e "s%@shlib_slibdir_qual@%%g"
+ if [ "$LIBUNWIND" ]; then
+ echo ""
+ echo "${dir}/${shlibunwind_base_name}${SHLIB_EXT}: $shlibunwind_deps"
+ echo " $SHLIBUNWIND_LINK" \
+ | sed -e "s%@multilib_flags@%$flags%g" \
+ -e "s%@multilib_dir@%$dir%g" \
+ -e "s%@shlib_objs@%$libunwind_sh_objs%g" \
+ -e "s%@shlib_base_name@%$shlibunwind_base_name%g" \
+ -e "s%@shlib_so_name@%$shlibunwind_so_name%g" \
+ -e "s%@shlib_dir@%$shlib_dir%g" \
+ -e "s%@shlib_slibdir_qual@%%g"
+ fi
elif [ "$SHLIB_MULTILIB" = "$dir" ]; then
shlib_base_name="libgcc_s";
+ shlibunwind_base_name="libunwind";
echo ""
echo "${shlib_base_name}${SHLIB_EXT}: $shlib_deps"
echo " $SHLIB_LINK" \
-e "s%@multilib_dir@%$dir%g" \
-e "s%@shlib_objs@%$libgcc_sh_objs%g" \
-e "s%@shlib_base_name@%$shlib_base_name%g" \
- -e "s%@shlib_map_file@%$mapfile%g"
+ -e "s%@shlib_map_file@%$mapfile%g" \
+ -e "s%@shlib_so_name@%$shlib_base_name%g" \
+ -e "s%@shlib_dir@%%g" \
+ -e "s%@shlib_slibdir_qual@%%g"
+ if [ "$LIBUNWIND" ]; then
+ echo ""
+ echo "${shlibunwind_base_name}${SHLIB_EXT}: $shlibunwind_deps"
+ echo " $SHLIBUNWIND_LINK" \
+ | sed -e "s%@multilib_flags@%$flags%g" \
+ -e "s%@multilib_dir@%$dir%g" \
+ -e "s%@shlib_objs@%$libgcc_sh_objs%g" \
+ -e "s%@shlib_base_name@%$shlibunwind_base_name%g" \
+ -e "s%@shlib_so_name@%$shlibunwind_base_name%g" \
+ -e "s%@shlib_dir@%%g" \
+ -e "s%@shlib_slibdir_qual@%%g"
+ fi
fi
fi
done
for ml in $MULTILIBS; do
dir=`echo ${ml} | sed -e 's/;.*$//' -e 's/=/$(EQ)/g'`
if [ $dir != . ]; then
- dirs="$dirs libgcc/${dir}"
+ dirs="$dirs ${dir} libgcc/${dir}"
fi
done
echo ''
echo 'libgcc-stage-start:'
echo ' for dir in '"${dirs}"'; do \'
-echo ' if [ -d $(stage)/$$dir ]; then true; else mkdir $(stage)/$$dir; fi; \'
+echo ' if [ -d $(stage)/$$dir ]; then true; else '$mkinstalldirs' $(stage)/$$dir; fi; \'
echo ' done'
echo ' -for dir in '"${dirs}"'; do \'
echo ' mv $$dir/*'"${objext}"' $(stage)/$$dir; \'
+echo ' mv $$dir/*'"${objext}s"' $(stage)/$$dir || true; \'
+echo ' test ! -f $$dir/stacknote.s || mv $$dir/stacknote.s $(stage)/$$dir; \'
+echo ' test ! -f $$dir/libgcc.a || mv $$dir/lib* $(stage)/$$dir; \'
echo ' done'
echo ""
if [ $dir != . ]; then
dirs="$dirs ${dir} libgcc/${dir}"
fi
- all="$all ${dir}/libgcc.a"
+ all="$all ${dir}/libgcc.a ${dir}/libgcov.a"
+ if [ "$LIBUNWIND" ]; then
+ all="$all ${dir}/libunwind.a"
+ fi
if [ "$SHLIB_LINK" ]; then
all="$all ${dir}/libgcc_eh.a"
if [ -z "$SHLIB_MULTILIB" ]; then
suff=_`echo $dir | sed s,/,_,g`
fi
all="$all ${dir}/libgcc_s${suff}${SHLIB_EXT}"
+ if [ "$LIBUNWIND" ]; then
+ all="$all ${dir}/${dir}/libunwind${suff}${SHLIB_EXT}"
+ fi
elif [ "$SHLIB_MULTILIB" = "$dir" ]; then
all="$all libgcc_s${SHLIB_EXT}"
+ if [ "$LIBUNWIND" ]; then
+ all="$all ${dir}/${dir}/libunwind${SHLIB_EXT}"
+ fi
fi
fi
done
echo "install: $all"
for ml in $MULTILIBS; do
dir=`echo ${ml} | sed -e 's/;.*$//' -e 's/=/$(EQ)/g'`
+ flags=`echo ${ml} | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`;
if [ $dir != . ]; then
- ldir='$(libsubdir)'/$dir
- echo " if [ -d $ldir ]; then true; else mkdir $ldir; chmod a+rx $ldir; fi;"
+ ldir='$(DESTDIR)$(libsubdir)'/$dir
+ echo " if [ -d $ldir ]; then true; else $mkinstalldirs $ldir; chmod a+rx $ldir; fi;"
else
- ldir='$(libsubdir)'
+ ldir='$(DESTDIR)$(libsubdir)'
fi
echo ' $(INSTALL_DATA)' ${dir}/libgcc.a ${ldir}/
echo ' $(RANLIB_FOR_TARGET)' ${ldir}/libgcc.a
+ echo ' $(INSTALL_DATA)' ${dir}/libgcov.a ${ldir}/
+ echo ' $(RANLIB_FOR_TARGET)' ${ldir}/libgcov.a
if [ "$SHLIB_LINK" ]; then
echo ' $(INSTALL_DATA)' ${dir}/libgcc_eh.a ${ldir}/
echo ' $(RANLIB_FOR_TARGET)' ${ldir}/libgcc_eh.a
if [ -z "$SHLIB_MULTILIB" ]; then
- if [ "$dir" = "." ]; then
- shlib_base_name="libgcc_s";
+ if [ "$dir" = . ]; then
+ shlib_base_name=libgcc_s
+ shlibunwind_base_name=libunwind
else
shlib_base_name=libgcc_s_`echo $dir | sed s,/,_,g`
+ shlibunwind_base_name=libunwind_`echo $dir | sed s,/,_,g`
+ fi
+ shlib_so_name="$shlib_base_name"
+ shlibunwind_so_name="$shlibunwind_base_name"
+ shlib_dir=
+ shlib_slibdir_qual=
+ if [ -n "$MULTILIB_OSDIRNAMES" ]; then
+ gcc_multilib_dir=`./xgcc -B./ $flags --print-multi-directory`
+ os_multilib_dir=`./xgcc -B./ $flags --print-multi-os-directory`
+ if [ "$dir" != . ]; then
+ shlib_dir="$dir"/
+ fi
+ gcc_multilib_sup=`echo $gcc_multilib_dir | sed 's~^[^/]*/~~'`
+ os_multilib_base=`echo $os_multilib_dir | sed -n "s~/${gcc_multilib_sup}\$~~p"`
+ if [ -z "$os_multilib_base" ]; then
+ shlib_so_name=libgcc_s
+ shlibunwind_so_name=libunwind
+ if [ "$os_multilib_dir" != "." ]; then
+ shlib_slibdir_qual="/$os_multilib_dir"
+ fi
+ else
+ shlib_so_name=libgcc_s_`echo $gcc_multilib_sup | sed s,/,_,g`
+ shlibunwind_so_name=libunwind_`echo $gcc_multilib_sup | sed s,/,_,g`
+ shlib_slibdir_qual="/$os_multilib_base"
+ fi
fi
echo " $SHLIB_INSTALL" \
- | sed -e "s%@shlib_base_name@%$shlib_base_name%g"
+ | sed -e "s%@shlib_base_name@%$shlib_base_name%g" \
+ -e "s%@shlib_so_name@%$shlib_so_name%g" \
+ -e "s%@shlib_dir@%$shlib_dir%g" \
+ -e "s%@shlib_slibdir_qual@%$shlib_slibdir_qual%g"
+ if [ "$LIBUNWIND" ]; then
+ echo " $SHLIBUNWIND_INSTALL" \
+ | sed -e "s%@shlib_base_name@%$shlibunwind_base_name%g" \
+ -e "s%@shlib_so_name@%$shlibunwind_so_name%g" \
+ -e "s%@shlib_dir@%$shlib_dir%g" \
+ -e "s%@shlib_slibdir_qual@%$shlib_slibdir_qual%g"
+ libunwinddir='$(DESTDIR)$(slibdir)$(shlib_slibdir_qual)/$(shlib_dir)'
+ echo ' $(INSTALL_DATA)' ${dir}/libunwind.a ${libunwinddir}/
+ echo ' $(RANLIB_FOR_TARGET)' ${libunwinddir}/libunwind.a
+ fi
elif [ "$SHLIB_MULTILIB" = "$dir" ]; then
shlib_base_name="libgcc_s";
echo " $SHLIB_INSTALL" \
- | sed -e "s%@shlib_base_name@%$shlib_base_name%g"
+ | sed -e "s%@shlib_base_name@%$shlib_base_name%g" \
+ -e "s%@shlib_so_name@%$shlib_base_name%g" \
+ -e "s%@shlib_dir@%%g" \
+ -e "s%@shlib_slibdir_qual@%%g"
+ if [ "$LIBUNWIND" ]; then
+ echo " $SHLIBUNWIND_INSTALL" \
+ | sed -e "s%@shlib_base_name@%$shlibunwind_base_name%g" \
+ -e "s%@shlib_so_name@%$shlibunwind_base_name%g" \
+ -e "s%@shlib_dir@%%g" \
+ -e "s%@shlib_slibdir_qual@%%g"
+ libunwinddir='$(DESTDIR)$(slibdir)'
+ echo ' $(INSTALL_DATA)' ${dir}/libunwind.a ${libunwinddir}/
+ echo ' $(RANLIB_FOR_TARGET)' ${libunwinddir}/libunwind.a
+ fi
fi
fi
done
dir=`echo ${ml} | sed -e 's/;.*$//' -e 's/=/$(EQ)/g'`
if [ $dir != . ]; then
out=${dir}/$f
- ldir='$(libsubdir)'/$dir
+ ldir='$(DESTDIR)$(libsubdir)'/$dir
else
out=$f
- ldir='$(libsubdir)'
+ ldir='$(DESTDIR)$(libsubdir)'
fi
echo ' $(INSTALL_DATA)' $out $ldir/
done
OSDN Git Service
