#!/bin/sh
# Construct makefile for libgcc.
-# Copyright (C) 2000 Free Software Foundation, Inc.
+# Copyright (C) 2000, 2002 Free Software Foundation, Inc.
#
-# This file is part of GNU CC.
+# This file is part of GCC.
# Arguments, taken from the environment, since there are a lot
# of them, and positional args becomes quite ugly.
#
# objext
-# OLDCC
-# LIBGCC1
-# LIB1FUNCS
# LIB1ASMFUNCS
-# LIB1FUNCS_EXTRA
-# LIB2FUNCS
+# LIB2FUNCS_1
+# LIB2FUNCS_2
# LIB2FUNCS_ST
# LIB2ADD
# LIB2ADD_ST
# LIB2ADDEHDEP
# FPBIT
# FPBIT_FUNCS
+# LIB2_DIVMOD_FUNCS
# DPBIT
# DPBIT_FUNCS
# LIBGCC
# SHLIB_LINK
# SHLIB_MULTILIB
# SHLIB_MKMAP
+# SHLIB_MKMAP_OPTS
# SHLIB_MAPFILES
# SHLIB_NM_FLAGS
# SHLIB_INSTALL
+# MULTILIB_OSDIRNAMES
# Make needs VPATH to be literal.
echo 'srcdir = @srcdir@'
echo 'force:'
echo
-# Detect gcc as OLDCC. This indicates a target for which LIB1FUNCS
-# is not needed. This is not quite the same as libgcc1.null, even
-# on a target not using libgcc1-asm.a.
-
-if [ "@build_canonical@" = "@target@" ]; then
- tmp="tmp-$$.c"
- cat > $tmp <<EOF
-#ifdef __GNUC__
- yes;
-#endif
-EOF
- if $OLDCC -E $tmp | grep yes > /dev/null 2>&1; then
- LIB1FUNCS=""
- fi
- rm -f $tmp
-fi
-
# Disable SHLIB_LINK if shared libgcc not enabled.
if [ "@enable_shared@" = "no" ]; then
SHLIB_LINK=""
# Build lines.
gcc_compile='$(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) $(INCLUDES)'
-oldcc_compile='$(OLDCC) -DIN_LIBGCC1 $(CCLIBFLAGS) $(INCLUDES)'
make_compile='$(MAKE) GCC_FOR_TARGET="$(GCC_FOR_TARGET)" \
AR_FOR_TARGET="$(AR_FOR_TARGET)" \
AR_CREATE_FOR_TARGET="$(AR_CREATE_FOR_TARGET)" \
AR_EXTRACT_FOR_TARGET="$(AR_EXTRACT_FOR_TARGET)" \
AR_FLAGS_FOR_TARGET="$(AR_FLAGS_FOR_TARGET)" \
CC="$(CC)" CFLAGS="$(CFLAGS)" \
- HOST_PREFIX="$(HOST_PREFIX)" \
- HOST_PREFIX_1="$(HOST_PREFIX_1)" \
+ BUILD_PREFIX="$(BUILD_PREFIX)" \
+ BUILD_PREFIX_1="$(BUILD_PREFIX_1)" \
LANGUAGES="$(LANGUAGES)"'
-# Dependancies for libgcc1.c
-libgcc1_c_dep='stmp-dirs $(srcdir)/libgcc1.c $(CONFIG_H)'
-
-# Dependancies for libgcc2.c
-libgcc2_c_dep='stmp-dirs $(srcdir)/libgcc2.c $(CONFIG_H) $(MACHMODE_H) longlong.h gbl-ctors.h config.status stmp-int-hdrs tsystem.h'" $LIB2ADDEHDEP"
+# Dependencies for libgcc2.c
+libgcc2_c_dep='stmp-dirs $(srcdir)/libgcc2.c $(CONFIG_H) coretypes.h $(TM_H) $(MACHMODE_H) longlong.h gbl-ctors.h config.status stmp-int-hdrs tsystem.h'" $LIB2ADDEHDEP"
-# Dependancies for fp-bit.c
+# Dependencies for fp-bit.c
fpbit_c_dep='stmp-dirs config.status tsystem.h'
#
libgcc1_objs=""
-case X"$LIBGCC1" in
- Xlibgcc1.null | X)
- ;;
-
- Xlibgcc1.cross)
- echo "You must find a way to make libgcc1 components yourself" 1>&2
- ;;
-
- Xlibgcc1-asm.a)
- for name in $LIB1ASMFUNCS; do
- for ml in $MULTILIBS; do
- dir=`echo ${ml} | sed -e 's/;.*$//' -e 's/=/$(EQ)/g'`
- flags=`echo ${ml} | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`;
- out="libgcc/${dir}/${name}${objext}"
+for name in $LIB1ASMFUNCS; do
+ for ml in $MULTILIBS; do
+ dir=`echo ${ml} | sed -e 's/;.*$//' -e 's/=/$(EQ)/g'`
+ flags=`echo ${ml} | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`;
+ out="libgcc/${dir}/${name}${objext}"
- echo ${out}: stmp-dirs '$(srcdir)/config/$(LIB1ASMSRC)'
- echo " $gcc_compile" $flags -DL$name -xassembler-with-cpp \
+ echo ${out}: stmp-dirs '$(srcdir)/config/$(LIB1ASMSRC)'
+ echo " $gcc_compile" $flags -DL$name -xassembler-with-cpp \
-c '$(srcdir)/config/$(LIB1ASMSRC)' -o $out
- # Remove any objects from LIB2FUNCS that are defined as optimized
- # assembly code in LIB1ASMFUNCS.
- LIB2FUNCS=`echo $LIB2FUNCS | sed -e 's/^'$name' //' \
+ # Remove any objects from LIB2FUNCS and LIB2_DIVMOD_FUNCS that are
+ # defined as optimized assembly code in LIB1ASMFUNCS.
+ LIB2FUNCS_1=`echo $LIB2FUNCS_1 | sed -e 's/^'$name' //' \
-e 's/ '$name' / /' \
- -e 's/ '$name'$//'`
- done
- libgcc1_objs="$libgcc1_objs ${name}${objext}"
- done
- ;;
-
- Xlibgcc1.a)
- for name in $LIB1FUNCS; do
- out="libgcc/${name}${objext}"
-
- echo $out: $libgcc1_c_dep
- if [ -z "@NO_MINUS_C_MINUS_O@" ]; then
- echo " $oldcc_compile" -DL$name $flags -c '$(srcdir)/libgcc1.c' -o $out
- else
- echo " $oldcc_compile" -DL$name $flags -c '$(srcdir)/libgcc1.c'
- echo " mv libgcc1${objext} $out"
- fi
-
- libgcc1_objs="$libgcc1_objs ${name}${objext}"
- done
-
- for file in $LIB1FUNCS_EXTRA; do
- name=`echo $file | sed -e 's/[.][cS]$//' -e 's/[.]asm$//'`
- out="libgcc/${name}${objext}"
-
- echo $out: $file
- if [ ${name}.asm = $file ]; then
- echo " cp $file ${name}.s"
- file=${name}.s
- fi
-
- if [ -z "@NO_MINUS_C_MINUS_O@" ]; then
- echo " $oldcc_compile" -c $file -o $out
- else
- echo " $oldcc_compile" -c $file
- tmp=`echo $file | sed -e 's/[.][cs]$/'${objext}/ -e 's,.*/,,'`
- echo " mv $tmp $out"
- fi
-
- libgcc1_objs="$libgcc1_objs ${name}${objext}"
- done
- ;;
- *)
- echo "I'm confused about libgcc1." 1>&2
- exit 1
- ;;
-esac
+ -e 's/ '$name'$//'`
+ LIB2FUNCS_2=`echo $LIB2FUNCS_2 | sed -e 's/^'$name' //' \
+ -e 's/ '$name' / /' \
+ -e 's/ '$name'$//'`
+ LIB2_DIVMOD_FUNCS=`echo $LIB2_DIVMOD_FUNCS | sed -e 's/^'$name' //' \
+ -e 's/ '$name' / /' \
+ -e 's/ '$name'$//'`
+ done
+ libgcc1_objs="$libgcc1_objs ${name}${objext}"
+done
#
# Build libgcc2 components.
libgcc2_objs=""
libgcc2_st_objs=""
+libgcc2_eh_objs=""
-for name in $LIB2FUNCS; do
+for name in $LIB2FUNCS_1 $LIB2FUNCS_2; do
for ml in $MULTILIBS; do
dir=`echo ${ml} | sed -e 's/;.*$//' -e 's/=/$(EQ)/g'`
flags=`echo ${ml} | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`;
libgcc2_st_objs="$libgcc2_st_objs ${name}${objext}"
done
+for name in $LIB2_DIVMOD_FUNCS; do
+ for ml in $MULTILIBS; do
+ dir=`echo ${ml} | sed -e 's/;.*$//' -e 's/=/$(EQ)/g'`
+ flags=`echo ${ml} | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`;
+ out="libgcc/${dir}/${name}${objext}"
+
+ echo $out: $libgcc2_c_dep
+ echo " $gcc_compile" '$(MAYBE_USE_COLLECT2)' $flags -DL$name \
+ -c '$(srcdir)/libgcc2.c' -fexceptions -fnon-call-exceptions -o $out
+ done
+ libgcc2_objs="$libgcc2_objs ${name}${objext}"
+done
+
if [ "$FPBIT" ]; then
for name in $FPBIT_FUNCS; do
for ml in $MULTILIBS; do
echo $out: stmp-dirs $file
echo " $gcc_compile" $flags -fexceptions -c $file -o $out
done
- libgcc2_objs="$libgcc2_objs ${oname}${objext}"
+ if [ "$SHLIB_LINK" ]; then
+ libgcc2_eh_objs="$libgcc2_eh_objs ${oname}${objext}"
+ else
+ libgcc2_objs="$libgcc2_objs ${oname}${objext}"
+ fi
done
for file in $LIB2ADD_ST; do
done
# SHLIB_MKMAP
+# SHLIB_MKMAP_OPTS
# SHLIB_MAPFILES
for ml in $MULTILIBS; do
dir=`echo ${ml} | sed -e 's/;.*$//' -e 's/=/$(EQ)/g'`
flags=`echo ${ml} | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`;
libgcc_objs=""
+ libgcc_eh_objs=""
for o in $libgcc1_objs; do
- if [ "$LIBGCC1" = libgcc1-asm.a ]; then
- libgcc_objs="$libgcc_objs libgcc/${dir}/$o"
- else
- libgcc_objs="$libgcc_objs libgcc/$o"
- fi
+ libgcc_objs="$libgcc_objs libgcc/${dir}/$o"
done
for o in $libgcc2_objs; do
libgcc_objs="$libgcc_objs libgcc/${dir}/$o"
done
- shlib_deps="$libgcc_objs"
+ for o in $libgcc2_eh_objs; do
+ libgcc_eh_objs="$libgcc_eh_objs libgcc/${dir}/$o"
+ done
+ libgcc_sh_objs="$libgcc_objs $libgcc_eh_objs"
+ shlib_deps="$libgcc_sh_objs"
libgcc_st_objs=""
for o in $libgcc2_st_objs; do
libgcc_st_objs="$libgcc_st_objs libgcc/${dir}/$o"
done
- if [ "$SHLIB_LINK" -a "$SHLIB_MKMAP" -a -z "$mapfile" ]; then
- mapfile="libgcc.map"
+ if [ "$SHLIB_LINK" -a "$SHLIB_MKMAP" ]; then
+ mapfile="libgcc/${dir}/libgcc.map"
+ tmpmapfile="libgcc/${dir}/tmp-libgcc.map"
echo ""
- echo "${mapfile}: $SHLIB_MKMAP $SHLIB_MAPFILES $libgcc_objs"
- echo ' { $(NM_FOR_TARGET)'" $SHLIB_NM_FLAGS $libgcc_objs; echo %%; cat $SHLIB_MAPFILES; } | "'$(AWK)'" -f $SHLIB_MKMAP > "'tmp-$@'
- echo ' mv tmp-$@ $@'
+ echo "${mapfile}: $SHLIB_MKMAP $SHLIB_MAPFILES $libgcc_sh_objs"
+ echo ' { $(NM_FOR_TARGET)'" $SHLIB_NM_FLAGS $libgcc_sh_objs; echo %%; \\"
+ echo " cat $SHLIB_MAPFILES | sed -e "'"/^[ ]*#/d" -e '\''s/^%\(if\|else\|elif\|endif\|define\)/#\1/'\'" \\"
+ echo " | $gcc_compile $flags -E -xassembler-with-cpp -; \\"
+ echo ' } | $(AWK)'" -f $SHLIB_MKMAP $SHLIB_MKMAP_OPTS > ${tmpmapfile}"
+ echo ' mv '"$tmpmapfile"' $@'
fi
shlib_deps="$shlib_deps $mapfile"
shlib_deps="$shlib_deps $dir/$f"
done
+ libgcc_a_objs="$libgcc_objs $libgcc_st_objs"
+
+ if [ "@libgcc_visibility@" = yes -a "$SHLIB_LINK" ]; then
+ libgcc_a_objs=
+ echo ""
+ for o in $libgcc_objs $libgcc_st_objs; do
+ # .oS objects will have all non-local symbol definitions .hidden
+ oS=`echo ${o} | sed s~${objext}'$~.oS~g'`
+ echo "${oS}: stmp-dirs ${o}"
+ echo ' $(NM_FOR_TARGET) '${SHLIB_NM_FLAGS} ${o}' | $(AWK) '\''NF == 3 { print "\t.hidden", $$3 }'\'' | $(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) '${flags}' -r -nostdinc -nostdlib -o $@ '${o}' -xassembler -'
+ libgcc_a_objs="${libgcc_a_objs} ${oS}"
+ done
+ fi
+
echo ""
- echo "${dir}/libgcc.a: $libgcc_objs $libgcc_st_objs"
+ echo "${dir}/libgcc.a: $libgcc_a_objs"
echo " -rm -rf ${dir}/libgcc.a"
- echo ' $(AR_CREATE_FOR_TARGET)' ${dir}/libgcc.a $libgcc_objs $libgcc_st_objs
+ echo ' $(AR_CREATE_FOR_TARGET)' ${dir}/libgcc.a $libgcc_a_objs
echo ' if $(RANLIB_TEST_FOR_TARGET) ; then' \\
echo ' $(RANLIB_FOR_TARGET)' ${dir}/libgcc.a ';' \\
echo ' else true; fi;'
if [ "$SHLIB_LINK" ]; then
+
+ echo ""
+ echo "${dir}/libgcc_eh.a: $libgcc_eh_objs"
+ echo " -rm -rf ${dir}/libgcc_eh.a"
+ echo ' $(AR_CREATE_FOR_TARGET)' ${dir}/libgcc_eh.a $libgcc_eh_objs
+ echo ' if $(RANLIB_TEST_FOR_TARGET) ; then' \\
+ echo ' $(RANLIB_FOR_TARGET)' ${dir}/libgcc_eh.a ';' \\
+ echo ' else true; fi;'
+
if [ -z "$SHLIB_MULTILIB" ]; then
- if [ "$dir" = "." ]; then
- shlib_base_name="libgcc_s";
+ if [ "$dir" = . ]; then
+ shlib_base_name=libgcc_s
else
shlib_base_name=libgcc_s_`echo $dir | sed s,/,_,g`
fi
+ shlib_so_name="$shlib_base_name"
+ shlib_dir=
+ if [ -n "$MULTILIB_OSDIRNAMES" ]; then
+ if [ "$dir" != . ]; then
+ gcc_multilib_dir=`./xgcc -B./ $flags --print-multi-directory`
+ os_multilib_dir=`./xgcc -B./ $flags --print-multi-os-directory`
+ shlib_dir="$dir"/
+ gcc_multilib_sup=`echo $gcc_multilib_dir | sed 's~^[^/]*/~~'`
+ os_multilib_base=`echo $os_multilib_dir | sed -n "s~/${gcc_multilib_sup}\$~~p"`
+ if [ -z "$os_multilib_base" ]; then
+ shlib_so_name=libgcc_s
+ else
+ shlib_so_name=libgcc_s_`echo $gcc_multilib_sup | sed s,/,_,g`
+ fi
+ fi
+ fi
echo ""
echo "${dir}/${shlib_base_name}${SHLIB_EXT}: $shlib_deps"
echo " $SHLIB_LINK" \
| sed -e "s%@multilib_flags@%$flags%g" \
-e "s%@multilib_dir@%$dir%g" \
- -e "s%@shlib_objs@%$libgcc_objs%g" \
+ -e "s%@shlib_objs@%$libgcc_sh_objs%g" \
-e "s%@shlib_base_name@%$shlib_base_name%g" \
- -e "s%@shlib_map_file@%$mapfile%g"
+ -e "s%@shlib_map_file@%$mapfile%g" \
+ -e "s%@shlib_so_name@%$shlib_so_name%g" \
+ -e "s%@shlib_dir@%$shlib_dir%g"
elif [ "$SHLIB_MULTILIB" = "$dir" ]; then
shlib_base_name="libgcc_s";
echo ""
echo " $SHLIB_LINK" \
| sed -e "s%@multilib_flags@%$flags%g" \
-e "s%@multilib_dir@%$dir%g" \
- -e "s%@shlib_objs@%$libgcc_objs%g" \
+ -e "s%@shlib_objs@%$libgcc_sh_objs%g" \
-e "s%@shlib_base_name@%$shlib_base_name%g" \
- -e "s%@shlib_map_file@%$mapfile%g"
+ -e "s%@shlib_map_file@%$mapfile%g" \
+ -e "s%@shlib_so_name@%$shlib_base_name%g" \
+ -e "s%@shlib_dir@%%g"
fi
fi
done
fi
all="$all ${dir}/libgcc.a"
if [ "$SHLIB_LINK" ]; then
+ all="$all ${dir}/libgcc_eh.a"
if [ -z "$SHLIB_MULTILIB" ]; then
if [ "$dir" = "." ]; then
suff="";
echo 'stmp-dirs: force'
echo ' for d in '"$dirs"'; do \'
-echo ' if [ -d $$d ]; then true; else mkdir $$d; fi \'
+echo ' if [ -d $$d ]; then true; else '$mkinstalldirs' $$d; fi; \'
echo ' done'
echo ' if [ -f stmp-dirs ]; then true; else touch stmp-dirs; fi'
echo "install: $all"
for ml in $MULTILIBS; do
dir=`echo ${ml} | sed -e 's/;.*$//' -e 's/=/$(EQ)/g'`
+ flags=`echo ${ml} | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`;
if [ $dir != . ]; then
ldir='$(libsubdir)'/$dir
echo " if [ -d $ldir ]; then true; else mkdir $ldir; chmod a+rx $ldir; fi;"
echo ' $(RANLIB_FOR_TARGET)' ${ldir}/libgcc.a
if [ "$SHLIB_LINK" ]; then
+ echo ' $(INSTALL_DATA)' ${dir}/libgcc_eh.a ${ldir}/
+ echo ' $(RANLIB_FOR_TARGET)' ${ldir}/libgcc_eh.a
+
if [ -z "$SHLIB_MULTILIB" ]; then
- if [ "$dir" = "." ]; then
- shlib_base_name="libgcc_s";
+ if [ "$dir" = . ]; then
+ shlib_base_name=libgcc_s
else
shlib_base_name=libgcc_s_`echo $dir | sed s,/,_,g`
fi
+ shlib_so_name="$shlib_base_name"
+ shlib_dir=
+ shlib_slibdir_qual=
+ if [ -n "$MULTILIB_OSDIRNAMES" ]; then
+ gcc_multilib_dir=`./xgcc -B./ $flags --print-multi-directory`
+ os_multilib_dir=`./xgcc -B./ $flags --print-multi-os-directory`
+ if [ "$dir" != . ]; then
+ shlib_dir="$dir"/
+ fi
+ gcc_multilib_sup=`echo $gcc_multilib_dir | sed 's~^[^/]*/~~'`
+ os_multilib_base=`echo $os_multilib_dir | sed -n "s~/${gcc_multilib_sup}\$~~p"`
+ if [ -z "$os_multilib_base" ]; then
+ shlib_so_name=libgcc_s
+ if [ "$os_multilib_dir" != "." ]; then
+ shlib_slibdir_qual="/$os_multilib_dir"
+ fi
+ else
+ shlib_so_name=libgcc_s_`echo $gcc_multilib_sup | sed s,/,_,g`
+ shlib_slibdir_qual="/$os_multilib_base"
+ fi
+ fi
echo " $SHLIB_INSTALL" \
- | sed -e "s%@shlib_base_name@%$shlib_base_name%g"
+ | sed -e "s%@shlib_base_name@%$shlib_base_name%g" \
+ -e "s%@shlib_so_name@%$shlib_so_name%g" \
+ -e "s%@shlib_dir@%$shlib_dir%g" \
+ -e "s%@shlib_slibdir_qual@%$shlib_slibdir_qual%g"
elif [ "$SHLIB_MULTILIB" = "$dir" ]; then
shlib_base_name="libgcc_s";
echo " $SHLIB_INSTALL" \
- | sed -e "s%@shlib_base_name@%$shlib_base_name%g"
+ | sed -e "s%@shlib_base_name@%$shlib_base_name%g" \
+ -e "s%@shlib_so_name@%$shlib_base_name%g" \
+ -e "s%@shlib_dir@%%g" \
+ -e "s%@shlib_slibdir_qual@%%g"
fi
fi
done
OSDN Git Service
