/* More subroutines needed by GCC output code on some machines. */
/* Compile this one with gcc. */
/* Copyright (C) 1989, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
- 2000, 2001 Free Software Foundation, Inc.
+ 2000, 2001, 2002, 2003, 2004, 2005, 2007, 2008, 2009
+ Free Software Foundation, Inc.
This file is part of GCC.
GCC is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License as published by the Free
-Software Foundation; either version 2, or (at your option) any later
+Software Foundation; either version 3, or (at your option) any later
version.
-In addition to the permissions in the GNU General Public License, the
-Free Software Foundation gives you unlimited permission to link the
-compiled version of this file into combinations with other programs,
-and to distribute those combinations without any restriction coming
-from the use of this file. (The General Public License restrictions
-do apply in other respects; for example, they cover modification of
-the file, and distribution when not linked into a combine
-executable.)
-
GCC is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
for more details.
-You should have received a copy of the GNU General Public License
-along with GCC; see the file COPYING. If not, write to the Free
-Software Foundation, 59 Temple Place - Suite 330, Boston, MA
-02111-1307, USA. */
+Under Section 7 of GPL version 3, you are granted additional
+permissions described in the GCC Runtime Library Exception, version
+3.1, as published by the Free Software Foundation.
-/* It is incorrect to include config.h here, because this file is being
- compiled for the target, and hence definitions concerning only the host
- do not apply. */
+You should have received a copy of the GNU General Public License and
+a copy of the GCC Runtime Library Exception along with this program;
+see the files COPYING3 and COPYING.RUNTIME respectively. If not, see
+<http://www.gnu.org/licenses/>. */
#include "tconfig.h"
#include "tsystem.h"
+#include "coretypes.h"
+#include "tm.h"
+
+#ifdef HAVE_GAS_HIDDEN
+#define ATTRIBUTE_HIDDEN __attribute__ ((__visibility__ ("hidden")))
+#else
+#define ATTRIBUTE_HIDDEN
+#endif
-/* Don't use `fancy_abort' here even if config.h says to use it. */
-#ifdef abort
-#undef abort
+/* Work out the largest "word" size that we can deal with on this target. */
+#if MIN_UNITS_PER_WORD > 4
+# define LIBGCC2_MAX_UNITS_PER_WORD 8
+#elif (MIN_UNITS_PER_WORD > 2 \
+ || (MIN_UNITS_PER_WORD > 1 && __SIZEOF_LONG_LONG__ > 4))
+# define LIBGCC2_MAX_UNITS_PER_WORD 4
+#else
+# define LIBGCC2_MAX_UNITS_PER_WORD MIN_UNITS_PER_WORD
+#endif
+
+/* Work out what word size we are using for this compilation.
+ The value can be set on the command line. */
+#ifndef LIBGCC2_UNITS_PER_WORD
+#define LIBGCC2_UNITS_PER_WORD LIBGCC2_MAX_UNITS_PER_WORD
#endif
+#if LIBGCC2_UNITS_PER_WORD <= LIBGCC2_MAX_UNITS_PER_WORD
+
#include "libgcc2.h"
\f
-#if defined (L_negdi2) || defined (L_divdi3) || defined (L_moddi3)
-#if defined (L_divdi3) || defined (L_moddi3)
-static inline
+#ifdef DECLARE_LIBRARY_RENAMES
+ DECLARE_LIBRARY_RENAMES
#endif
+
+#if defined (L_negdi2)
DWtype
__negdi2 (DWtype u)
{
- DWunion w;
- DWunion uu;
-
- uu.ll = u;
-
- w.s.low = -uu.s.low;
- w.s.high = -uu.s.high - ((UWtype) w.s.low > 0);
+ const DWunion uu = {.ll = u};
+ const DWunion w = { {.low = -uu.s.low,
+ .high = -uu.s.high - ((UWtype) -uu.s.low > 0) } };
return w.ll;
}
#ifdef L_addvsi3
Wtype
-__addvsi3 (Wtype a, Wtype b)
+__addvSI3 (Wtype a, Wtype b)
{
- Wtype w;
+ const Wtype w = (UWtype) a + (UWtype) b;
- w = a + b;
+ if (b >= 0 ? w < a : w > a)
+ abort ();
+
+ return w;
+}
+#ifdef COMPAT_SIMODE_TRAPPING_ARITHMETIC
+SItype
+__addvsi3 (SItype a, SItype b)
+{
+ const SItype w = (USItype) a + (USItype) b;
if (b >= 0 ? w < a : w > a)
abort ();
return w;
}
+#endif /* COMPAT_SIMODE_TRAPPING_ARITHMETIC */
#endif
\f
#ifdef L_addvdi3
DWtype
-__addvdi3 (DWtype a, DWtype b)
+__addvDI3 (DWtype a, DWtype b)
{
- DWtype w;
-
- w = a + b;
+ const DWtype w = (UDWtype) a + (UDWtype) b;
if (b >= 0 ? w < a : w > a)
abort ();
\f
#ifdef L_subvsi3
Wtype
-__subvsi3 (Wtype a, Wtype b)
+__subvSI3 (Wtype a, Wtype b)
{
-#ifdef L_addvsi3
- return __addvsi3 (a, (-b));
-#else
- DWtype w;
+ const Wtype w = (UWtype) a - (UWtype) b;
+
+ if (b >= 0 ? w > a : w < a)
+ abort ();
- w = a - b;
+ return w;
+}
+#ifdef COMPAT_SIMODE_TRAPPING_ARITHMETIC
+SItype
+__subvsi3 (SItype a, SItype b)
+{
+ const SItype w = (USItype) a - (USItype) b;
if (b >= 0 ? w > a : w < a)
abort ();
return w;
-#endif
}
+#endif /* COMPAT_SIMODE_TRAPPING_ARITHMETIC */
#endif
\f
#ifdef L_subvdi3
DWtype
-__subvdi3 (DWtype a, DWtype b)
+__subvDI3 (DWtype a, DWtype b)
{
-#ifdef L_addvdi3
- return (a, (-b));
-#else
- DWtype w;
-
- w = a - b;
+ const DWtype w = (UDWtype) a - (UDWtype) b;
if (b >= 0 ? w > a : w < a)
abort ();
return w;
-#endif
}
#endif
\f
#ifdef L_mulvsi3
Wtype
-__mulvsi3 (Wtype a, Wtype b)
+__mulvSI3 (Wtype a, Wtype b)
{
- DWtype w;
+ const DWtype w = (DWtype) a * (DWtype) b;
- w = a * b;
+ if ((Wtype) (w >> W_TYPE_SIZE) != (Wtype) w >> (W_TYPE_SIZE - 1))
+ abort ();
+
+ return w;
+}
+#ifdef COMPAT_SIMODE_TRAPPING_ARITHMETIC
+#undef WORD_SIZE
+#define WORD_SIZE (sizeof (SItype) * BITS_PER_UNIT)
+SItype
+__mulvsi3 (SItype a, SItype b)
+{
+ const DItype w = (DItype) a * (DItype) b;
- if (((a >= 0) == (b >= 0)) ? w < 0 : w > 0)
+ if ((SItype) (w >> WORD_SIZE) != (SItype) w >> (WORD_SIZE-1))
abort ();
return w;
}
+#endif /* COMPAT_SIMODE_TRAPPING_ARITHMETIC */
#endif
\f
#ifdef L_negvsi2
Wtype
-__negvsi2 (Wtype a)
+__negvSI2 (Wtype a)
{
- Wtype w;
+ const Wtype w = -(UWtype) a;
+
+ if (a >= 0 ? w > 0 : w < 0)
+ abort ();
- w = -a;
+ return w;
+}
+#ifdef COMPAT_SIMODE_TRAPPING_ARITHMETIC
+SItype
+__negvsi2 (SItype a)
+{
+ const SItype w = -(USItype) a;
if (a >= 0 ? w > 0 : w < 0)
abort ();
return w;
}
+#endif /* COMPAT_SIMODE_TRAPPING_ARITHMETIC */
#endif
\f
#ifdef L_negvdi2
DWtype
-__negvdi2 (DWtype a)
+__negvDI2 (DWtype a)
{
- DWtype w;
-
- w = -a;
+ const DWtype w = -(UDWtype) a;
if (a >= 0 ? w > 0 : w < 0)
abort ();
\f
#ifdef L_absvsi2
Wtype
-__absvsi2 (Wtype a)
+__absvSI2 (Wtype a)
{
Wtype w = a;
if (a < 0)
#ifdef L_negvsi2
+ w = __negvSI2 (a);
+#else
+ w = -(UWtype) a;
+
+ if (w < 0)
+ abort ();
+#endif
+
+ return w;
+}
+#ifdef COMPAT_SIMODE_TRAPPING_ARITHMETIC
+SItype
+__absvsi2 (SItype a)
+{
+ SItype w = a;
+
+ if (a < 0)
+#ifdef L_negvsi2
w = __negvsi2 (a);
#else
- w = -a;
+ w = -(USItype) a;
if (w < 0)
abort ();
return w;
}
+#endif /* COMPAT_SIMODE_TRAPPING_ARITHMETIC */
#endif
\f
#ifdef L_absvdi2
DWtype
-__absvdi2 (DWtype a)
+__absvDI2 (DWtype a)
{
DWtype w = a;
if (a < 0)
-#ifdef L_negvsi2
- w = __negvsi2 (a);
+#ifdef L_negvdi2
+ w = __negvDI2 (a);
#else
- w = -a;
+ w = -(UDWtype) a;
if (w < 0)
abort ();
\f
#ifdef L_mulvdi3
DWtype
-__mulvdi3 (DWtype u, DWtype v)
+__mulvDI3 (DWtype u, DWtype v)
{
- DWtype w;
-
- w = u * v;
+ /* The unchecked multiplication needs 3 Wtype x Wtype multiplications,
+ but the checked multiplication needs only two. */
+ const DWunion uu = {.ll = u};
+ const DWunion vv = {.ll = v};
- if (((u >= 0) == (v >= 0)) ? w < 0 : w > 0)
- abort ();
+ if (__builtin_expect (uu.s.high == uu.s.low >> (W_TYPE_SIZE - 1), 1))
+ {
+ /* u fits in a single Wtype. */
+ if (__builtin_expect (vv.s.high == vv.s.low >> (W_TYPE_SIZE - 1), 1))
+ {
+ /* v fits in a single Wtype as well. */
+ /* A single multiplication. No overflow risk. */
+ return (DWtype) uu.s.low * (DWtype) vv.s.low;
+ }
+ else
+ {
+ /* Two multiplications. */
+ DWunion w0 = {.ll = (UDWtype) (UWtype) uu.s.low
+ * (UDWtype) (UWtype) vv.s.low};
+ DWunion w1 = {.ll = (UDWtype) (UWtype) uu.s.low
+ * (UDWtype) (UWtype) vv.s.high};
+
+ if (vv.s.high < 0)
+ w1.s.high -= uu.s.low;
+ if (uu.s.low < 0)
+ w1.ll -= vv.ll;
+ w1.ll += (UWtype) w0.s.high;
+ if (__builtin_expect (w1.s.high == w1.s.low >> (W_TYPE_SIZE - 1), 1))
+ {
+ w0.s.high = w1.s.low;
+ return w0.ll;
+ }
+ }
+ }
+ else
+ {
+ if (__builtin_expect (vv.s.high == vv.s.low >> (W_TYPE_SIZE - 1), 1))
+ {
+ /* v fits into a single Wtype. */
+ /* Two multiplications. */
+ DWunion w0 = {.ll = (UDWtype) (UWtype) uu.s.low
+ * (UDWtype) (UWtype) vv.s.low};
+ DWunion w1 = {.ll = (UDWtype) (UWtype) uu.s.high
+ * (UDWtype) (UWtype) vv.s.low};
+
+ if (uu.s.high < 0)
+ w1.s.high -= vv.s.low;
+ if (vv.s.low < 0)
+ w1.ll -= uu.ll;
+ w1.ll += (UWtype) w0.s.high;
+ if (__builtin_expect (w1.s.high == w1.s.low >> (W_TYPE_SIZE - 1), 1))
+ {
+ w0.s.high = w1.s.low;
+ return w0.ll;
+ }
+ }
+ else
+ {
+ /* A few sign checks and a single multiplication. */
+ if (uu.s.high >= 0)
+ {
+ if (vv.s.high >= 0)
+ {
+ if (uu.s.high == 0 && vv.s.high == 0)
+ {
+ const DWtype w = (UDWtype) (UWtype) uu.s.low
+ * (UDWtype) (UWtype) vv.s.low;
+ if (__builtin_expect (w >= 0, 1))
+ return w;
+ }
+ }
+ else
+ {
+ if (uu.s.high == 0 && vv.s.high == (Wtype) -1)
+ {
+ DWunion ww = {.ll = (UDWtype) (UWtype) uu.s.low
+ * (UDWtype) (UWtype) vv.s.low};
+
+ ww.s.high -= uu.s.low;
+ if (__builtin_expect (ww.s.high < 0, 1))
+ return ww.ll;
+ }
+ }
+ }
+ else
+ {
+ if (vv.s.high >= 0)
+ {
+ if (uu.s.high == (Wtype) -1 && vv.s.high == 0)
+ {
+ DWunion ww = {.ll = (UDWtype) (UWtype) uu.s.low
+ * (UDWtype) (UWtype) vv.s.low};
+
+ ww.s.high -= vv.s.low;
+ if (__builtin_expect (ww.s.high < 0, 1))
+ return ww.ll;
+ }
+ }
+ else
+ {
+ if (uu.s.high == (Wtype) -1 && vv.s.high == (Wtype) - 1)
+ {
+ DWunion ww = {.ll = (UDWtype) (UWtype) uu.s.low
+ * (UDWtype) (UWtype) vv.s.low};
+
+ ww.s.high -= uu.s.low;
+ ww.s.high -= vv.s.low;
+ if (__builtin_expect (ww.s.high >= 0, 1))
+ return ww.ll;
+ }
+ }
+ }
+ }
+ }
- return w;
+ /* Overflow. */
+ abort ();
}
#endif
\f
-/* Unless shift functions are defined whith full ANSI prototypes,
- parameter b will be promoted to int if word_type is smaller than an int. */
+/* Unless shift functions are defined with full ANSI prototypes,
+ parameter b will be promoted to int if shift_count_type is smaller than an int. */
#ifdef L_lshrdi3
DWtype
-__lshrdi3 (DWtype u, word_type b)
+__lshrdi3 (DWtype u, shift_count_type b)
{
- DWunion w;
- word_type bm;
- DWunion uu;
-
if (b == 0)
return u;
- uu.ll = u;
+ const DWunion uu = {.ll = u};
+ const shift_count_type bm = (sizeof (Wtype) * BITS_PER_UNIT) - b;
+ DWunion w;
- bm = (sizeof (Wtype) * BITS_PER_UNIT) - b;
if (bm <= 0)
{
w.s.high = 0;
}
else
{
- UWtype carries = (UWtype) uu.s.high << bm;
+ const UWtype carries = (UWtype) uu.s.high << bm;
w.s.high = (UWtype) uu.s.high >> b;
w.s.low = ((UWtype) uu.s.low >> b) | carries;
#ifdef L_ashldi3
DWtype
-__ashldi3 (DWtype u, word_type b)
+__ashldi3 (DWtype u, shift_count_type b)
{
- DWunion w;
- word_type bm;
- DWunion uu;
-
if (b == 0)
return u;
- uu.ll = u;
+ const DWunion uu = {.ll = u};
+ const shift_count_type bm = (sizeof (Wtype) * BITS_PER_UNIT) - b;
+ DWunion w;
- bm = (sizeof (Wtype) * BITS_PER_UNIT) - b;
if (bm <= 0)
{
w.s.low = 0;
}
else
{
- UWtype carries = (UWtype) uu.s.low >> bm;
+ const UWtype carries = (UWtype) uu.s.low >> bm;
w.s.low = (UWtype) uu.s.low << b;
w.s.high = ((UWtype) uu.s.high << b) | carries;
#ifdef L_ashrdi3
DWtype
-__ashrdi3 (DWtype u, word_type b)
+__ashrdi3 (DWtype u, shift_count_type b)
{
- DWunion w;
- word_type bm;
- DWunion uu;
-
if (b == 0)
return u;
- uu.ll = u;
+ const DWunion uu = {.ll = u};
+ const shift_count_type bm = (sizeof (Wtype) * BITS_PER_UNIT) - b;
+ DWunion w;
- bm = (sizeof (Wtype) * BITS_PER_UNIT) - b;
if (bm <= 0)
{
/* w.s.high = 1..1 or 0..0 */
}
else
{
- UWtype carries = (UWtype) uu.s.high << bm;
+ const UWtype carries = (UWtype) uu.s.high << bm;
w.s.high = uu.s.high >> b;
w.s.low = ((UWtype) uu.s.low >> b) | carries;
}
#endif
\f
+#ifdef L_bswapsi2
+SItype
+__bswapsi2 (SItype u)
+{
+ return ((((u) & 0xff000000) >> 24)
+ | (((u) & 0x00ff0000) >> 8)
+ | (((u) & 0x0000ff00) << 8)
+ | (((u) & 0x000000ff) << 24));
+}
+#endif
+#ifdef L_bswapdi2
+DItype
+__bswapdi2 (DItype u)
+{
+ return ((((u) & 0xff00000000000000ull) >> 56)
+ | (((u) & 0x00ff000000000000ull) >> 40)
+ | (((u) & 0x0000ff0000000000ull) >> 24)
+ | (((u) & 0x000000ff00000000ull) >> 8)
+ | (((u) & 0x00000000ff000000ull) << 8)
+ | (((u) & 0x0000000000ff0000ull) << 24)
+ | (((u) & 0x000000000000ff00ull) << 40)
+ | (((u) & 0x00000000000000ffull) << 56));
+}
+#endif
+#ifdef L_ffssi2
+#undef int
+int
+__ffsSI2 (UWtype u)
+{
+ UWtype count;
+
+ if (u == 0)
+ return 0;
+
+ count_trailing_zeros (count, u);
+ return count + 1;
+}
+#endif
+\f
#ifdef L_ffsdi2
-DWtype
-__ffsdi2 (DWtype u)
+#undef int
+int
+__ffsDI2 (DWtype u)
{
- DWunion uu;
+ const DWunion uu = {.ll = u};
UWtype word, count, add;
- uu.ll = u;
if (uu.s.low != 0)
word = uu.s.low, add = 0;
else if (uu.s.high != 0)
DWtype
__muldi3 (DWtype u, DWtype v)
{
- DWunion w;
- DWunion uu, vv;
-
- uu.ll = u,
- vv.ll = v;
+ const DWunion uu = {.ll = u};
+ const DWunion vv = {.ll = v};
+ DWunion w = {.ll = __umulsidi3 (uu.s.low, vv.s.low)};
- w.ll = __umulsidi3 (uu.s.low, vv.s.low);
w.s.high += ((UWtype) uu.s.low * (UWtype) vv.s.high
+ (UWtype) uu.s.high * (UWtype) vv.s.low);
}
#endif
\f
+#if (defined (L_udivdi3) || defined (L_divdi3) || \
+ defined (L_umoddi3) || defined (L_moddi3))
+#if defined (sdiv_qrnnd)
+#define L_udiv_w_sdiv
+#endif
+#endif
+
#ifdef L_udiv_w_sdiv
#if defined (sdiv_qrnnd)
+#if (defined (L_udivdi3) || defined (L_divdi3) || \
+ defined (L_umoddi3) || defined (L_moddi3))
+static inline __attribute__ ((__always_inline__))
+#endif
UWtype
__udiv_w_sdiv (UWtype *rp, UWtype a1, UWtype a0, UWtype d)
{
{
if (a1 < d - a1 - (a0 >> (W_TYPE_SIZE - 1)))
{
- /* dividend, divisor, and quotient are nonnegative */
+ /* Dividend, divisor, and quotient are nonnegative. */
sdiv_qrnnd (q, r, a1, a0, d);
}
else
{
- /* Compute c1*2^32 + c0 = a1*2^32 + a0 - 2^31*d */
+ /* Compute c1*2^32 + c0 = a1*2^32 + a0 - 2^31*d. */
sub_ddmmss (c1, c0, a1, a0, d >> 1, d << (W_TYPE_SIZE - 1));
- /* Divide (c1*2^32 + c0) by d */
+ /* Divide (c1*2^32 + c0) by d. */
sdiv_qrnnd (q, r, c1, c0, d);
- /* Add 2^31 to quotient */
+ /* Add 2^31 to quotient. */
q += (UWtype) 1 << (W_TYPE_SIZE - 1);
}
}
#endif
#ifdef L_clz
-const UQItype __clz_tab[] =
+const UQItype __clz_tab[256] =
{
0,1,2,2,3,3,3,3,4,4,4,4,4,4,4,4,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,
6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,
8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,
8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,
8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,
- 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,
+ 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8
+};
+#endif
+\f
+#ifdef L_clzsi2
+#undef int
+int
+__clzSI2 (UWtype x)
+{
+ Wtype ret;
+
+ count_leading_zeros (ret, x);
+
+ return ret;
+}
+#endif
+\f
+#ifdef L_clzdi2
+#undef int
+int
+__clzDI2 (UDWtype x)
+{
+ const DWunion uu = {.ll = x};
+ UWtype word;
+ Wtype ret, add;
+
+ if (uu.s.high)
+ word = uu.s.high, add = 0;
+ else
+ word = uu.s.low, add = W_TYPE_SIZE;
+
+ count_leading_zeros (ret, word);
+ return ret + add;
+}
+#endif
+\f
+#ifdef L_ctzsi2
+#undef int
+int
+__ctzSI2 (UWtype x)
+{
+ Wtype ret;
+
+ count_trailing_zeros (ret, x);
+
+ return ret;
+}
+#endif
+\f
+#ifdef L_ctzdi2
+#undef int
+int
+__ctzDI2 (UDWtype x)
+{
+ const DWunion uu = {.ll = x};
+ UWtype word;
+ Wtype ret, add;
+
+ if (uu.s.low)
+ word = uu.s.low, add = 0;
+ else
+ word = uu.s.high, add = W_TYPE_SIZE;
+
+ count_trailing_zeros (ret, word);
+ return ret + add;
+}
+#endif
+
+#ifdef L_popcount_tab
+const UQItype __popcount_tab[256] =
+{
+ 0,1,1,2,1,2,2,3,1,2,2,3,2,3,3,4,1,2,2,3,2,3,3,4,2,3,3,4,3,4,4,5,
+ 1,2,2,3,2,3,3,4,2,3,3,4,3,4,4,5,2,3,3,4,3,4,4,5,3,4,4,5,4,5,5,6,
+ 1,2,2,3,2,3,3,4,2,3,3,4,3,4,4,5,2,3,3,4,3,4,4,5,3,4,4,5,4,5,5,6,
+ 2,3,3,4,3,4,4,5,3,4,4,5,4,5,5,6,3,4,4,5,4,5,5,6,4,5,5,6,5,6,6,7,
+ 1,2,2,3,2,3,3,4,2,3,3,4,3,4,4,5,2,3,3,4,3,4,4,5,3,4,4,5,4,5,5,6,
+ 2,3,3,4,3,4,4,5,3,4,4,5,4,5,5,6,3,4,4,5,4,5,5,6,4,5,5,6,5,6,6,7,
+ 2,3,3,4,3,4,4,5,3,4,4,5,4,5,5,6,3,4,4,5,4,5,5,6,4,5,5,6,5,6,6,7,
+ 3,4,4,5,4,5,5,6,4,5,5,6,5,6,6,7,4,5,5,6,5,6,6,7,5,6,6,7,6,7,7,8
};
#endif
+\f
+#ifdef L_popcountsi2
+#undef int
+int
+__popcountSI2 (UWtype x)
+{
+ int i, ret = 0;
+
+ for (i = 0; i < W_TYPE_SIZE; i += 8)
+ ret += __popcount_tab[(x >> i) & 0xff];
+
+ return ret;
+}
+#endif
+\f
+#ifdef L_popcountdi2
+#undef int
+int
+__popcountDI2 (UDWtype x)
+{
+ int i, ret = 0;
+
+ for (i = 0; i < 2*W_TYPE_SIZE; i += 8)
+ ret += __popcount_tab[(x >> i) & 0xff];
+
+ return ret;
+}
+#endif
+\f
+#ifdef L_paritysi2
+#undef int
+int
+__paritySI2 (UWtype x)
+{
+#if W_TYPE_SIZE > 64
+# error "fill out the table"
+#endif
+#if W_TYPE_SIZE > 32
+ x ^= x >> 32;
+#endif
+#if W_TYPE_SIZE > 16
+ x ^= x >> 16;
+#endif
+ x ^= x >> 8;
+ x ^= x >> 4;
+ x &= 0xf;
+ return (0x6996 >> x) & 1;
+}
+#endif
+\f
+#ifdef L_paritydi2
+#undef int
+int
+__parityDI2 (UDWtype x)
+{
+ const DWunion uu = {.ll = x};
+ UWtype nx = uu.s.low ^ uu.s.high;
+
+#if W_TYPE_SIZE > 64
+# error "fill out the table"
+#endif
+#if W_TYPE_SIZE > 32
+ nx ^= nx >> 32;
+#endif
+#if W_TYPE_SIZE > 16
+ nx ^= nx >> 16;
+#endif
+ nx ^= nx >> 8;
+ nx ^= nx >> 4;
+ nx &= 0xf;
+ return (0x6996 >> nx) & 1;
+}
+#endif
#ifdef L_udivmoddi4
#if (defined (L_udivdi3) || defined (L_divdi3) || \
defined (L_umoddi3) || defined (L_moddi3))
-static inline
+static inline __attribute__ ((__always_inline__))
#endif
UDWtype
__udivmoddi4 (UDWtype n, UDWtype d, UDWtype *rp)
{
- DWunion ww;
- DWunion nn, dd;
+ const DWunion nn = {.ll = n};
+ const DWunion dd = {.ll = d};
DWunion rr;
UWtype d0, d1, n0, n1, n2;
UWtype q0, q1;
UWtype b, bm;
- nn.ll = n;
- dd.ll = d;
-
d0 = dd.s.low;
d1 = dd.s.high;
n0 = nn.s.low;
}
}
- ww.s.low = q0;
- ww.s.high = q1;
+ const DWunion ww = {{.low = q0, .high = q1}};
return ww.ll;
}
#endif
DWtype
__divdi3 (DWtype u, DWtype v)
{
- word_type c = 0;
- DWunion uu, vv;
+ Wtype c = 0;
+ DWunion uu = {.ll = u};
+ DWunion vv = {.ll = v};
DWtype w;
- uu.ll = u;
- vv.ll = v;
-
if (uu.s.high < 0)
c = ~c,
- uu.ll = __negdi2 (uu.ll);
+ uu.ll = -uu.ll;
if (vv.s.high < 0)
c = ~c,
- vv.ll = __negdi2 (vv.ll);
+ vv.ll = -vv.ll;
w = __udivmoddi4 (uu.ll, vv.ll, (UDWtype *) 0);
if (c)
- w = __negdi2 (w);
+ w = -w;
return w;
}
DWtype
__moddi3 (DWtype u, DWtype v)
{
- word_type c = 0;
- DWunion uu, vv;
+ Wtype c = 0;
+ DWunion uu = {.ll = u};
+ DWunion vv = {.ll = v};
DWtype w;
- uu.ll = u;
- vv.ll = v;
-
if (uu.s.high < 0)
c = ~c,
- uu.ll = __negdi2 (uu.ll);
+ uu.ll = -uu.ll;
if (vv.s.high < 0)
- vv.ll = __negdi2 (vv.ll);
+ vv.ll = -vv.ll;
- (void) __udivmoddi4 (uu.ll, vv.ll, &w);
+ (void) __udivmoddi4 (uu.ll, vv.ll, (UDWtype*)&w);
if (c)
- w = __negdi2 (w);
+ w = -w;
return w;
}
#endif
\f
#ifdef L_cmpdi2
-word_type
+cmp_return_type
__cmpdi2 (DWtype a, DWtype b)
{
- DWunion au, bu;
-
- au.ll = a, bu.ll = b;
+ const DWunion au = {.ll = a};
+ const DWunion bu = {.ll = b};
if (au.s.high < bu.s.high)
return 0;
#endif
#ifdef L_ucmpdi2
-word_type
+cmp_return_type
__ucmpdi2 (DWtype a, DWtype b)
{
- DWunion au, bu;
-
- au.ll = a, bu.ll = b;
+ const DWunion au = {.ll = a};
+ const DWunion bu = {.ll = b};
if ((UWtype) au.s.high < (UWtype) bu.s.high)
return 0;
}
#endif
\f
-#if defined(L_fixunstfdi) && (LIBGCC2_LONG_DOUBLE_TYPE_SIZE == 128)
-#define WORD_SIZE (sizeof (Wtype) * BITS_PER_UNIT)
-#define HIGH_WORD_COEFF (((UDWtype) 1) << WORD_SIZE)
-
-DWtype
+#if defined(L_fixunstfdi) && LIBGCC2_HAS_TF_MODE
+UDWtype
__fixunstfDI (TFtype a)
{
- TFtype b;
- UDWtype v;
-
if (a < 0)
return 0;
/* Compute high word of result, as a flonum. */
- b = (a / HIGH_WORD_COEFF);
+ const TFtype b = (a / Wtype_MAXp1_F);
/* Convert that to fixed (but not to DWtype!),
and shift it into the high word. */
- v = (UWtype) b;
- v <<= WORD_SIZE;
+ UDWtype v = (UWtype) b;
+ v <<= W_TYPE_SIZE;
/* Remove high part from the TFtype, leaving the low part as flonum. */
a -= (TFtype)v;
/* Convert that to fixed (but not to DWtype!) and add it in.
}
#endif
-#if defined(L_fixtfdi) && (LIBGCC2_LONG_DOUBLE_TYPE_SIZE == 128)
+#if defined(L_fixtfdi) && LIBGCC2_HAS_TF_MODE
DWtype
__fixtfdi (TFtype a)
{
}
#endif
-#if defined(L_fixunsxfdi) && (LIBGCC2_LONG_DOUBLE_TYPE_SIZE == 96)
-#define WORD_SIZE (sizeof (Wtype) * BITS_PER_UNIT)
-#define HIGH_WORD_COEFF (((UDWtype) 1) << WORD_SIZE)
-
-DWtype
+#if defined(L_fixunsxfdi) && LIBGCC2_HAS_XF_MODE
+UDWtype
__fixunsxfDI (XFtype a)
{
- XFtype b;
- UDWtype v;
-
if (a < 0)
return 0;
/* Compute high word of result, as a flonum. */
- b = (a / HIGH_WORD_COEFF);
+ const XFtype b = (a / Wtype_MAXp1_F);
/* Convert that to fixed (but not to DWtype!),
and shift it into the high word. */
- v = (UWtype) b;
- v <<= WORD_SIZE;
+ UDWtype v = (UWtype) b;
+ v <<= W_TYPE_SIZE;
/* Remove high part from the XFtype, leaving the low part as flonum. */
a -= (XFtype)v;
/* Convert that to fixed (but not to DWtype!) and add it in.
}
#endif
-#if defined(L_fixxfdi) && (LIBGCC2_LONG_DOUBLE_TYPE_SIZE == 96)
+#if defined(L_fixxfdi) && LIBGCC2_HAS_XF_MODE
DWtype
__fixxfdi (XFtype a)
{
}
#endif
-#ifdef L_fixunsdfdi
-#define WORD_SIZE (sizeof (Wtype) * BITS_PER_UNIT)
-#define HIGH_WORD_COEFF (((UDWtype) 1) << WORD_SIZE)
-
-DWtype
+#if defined(L_fixunsdfdi) && LIBGCC2_HAS_DF_MODE
+UDWtype
__fixunsdfDI (DFtype a)
{
- DFtype b;
- UDWtype v;
-
- if (a < 0)
- return 0;
-
- /* Compute high word of result, as a flonum. */
- b = (a / HIGH_WORD_COEFF);
- /* Convert that to fixed (but not to DWtype!),
- and shift it into the high word. */
- v = (UWtype) b;
- v <<= WORD_SIZE;
- /* Remove high part from the DFtype, leaving the low part as flonum. */
- a -= (DFtype)v;
- /* Convert that to fixed (but not to DWtype!) and add it in.
- Sometimes A comes out negative. This is significant, since
- A has more bits than a long int does. */
- if (a < 0)
- v -= (UWtype) (- a);
- else
- v += (UWtype) a;
- return v;
+ /* Get high part of result. The division here will just moves the radix
+ point and will not cause any rounding. Then the conversion to integral
+ type chops result as desired. */
+ const UWtype hi = a / Wtype_MAXp1_F;
+
+ /* Get low part of result. Convert `hi' to floating type and scale it back,
+ then subtract this from the number being converted. This leaves the low
+ part. Convert that to integral type. */
+ const UWtype lo = a - (DFtype) hi * Wtype_MAXp1_F;
+
+ /* Assemble result from the two parts. */
+ return ((UDWtype) hi << W_TYPE_SIZE) | lo;
}
#endif
-#ifdef L_fixdfdi
+#if defined(L_fixdfdi) && LIBGCC2_HAS_DF_MODE
DWtype
__fixdfdi (DFtype a)
{
}
#endif
-#ifdef L_fixunssfdi
-#define WORD_SIZE (sizeof (Wtype) * BITS_PER_UNIT)
-#define HIGH_WORD_COEFF (((UDWtype) 1) << WORD_SIZE)
-
-DWtype
-__fixunssfDI (SFtype original_a)
+#if defined(L_fixunssfdi) && LIBGCC2_HAS_SF_MODE
+UDWtype
+__fixunssfDI (SFtype a)
{
+#if LIBGCC2_HAS_DF_MODE
/* Convert the SFtype to a DFtype, because that is surely not going
to lose any bits. Some day someone else can write a faster version
that avoids converting to DFtype, and verify it really works right. */
- DFtype a = original_a;
- DFtype b;
- UDWtype v;
-
- if (a < 0)
+ const DFtype dfa = a;
+
+ /* Get high part of result. The division here will just moves the radix
+ point and will not cause any rounding. Then the conversion to integral
+ type chops result as desired. */
+ const UWtype hi = dfa / Wtype_MAXp1_F;
+
+ /* Get low part of result. Convert `hi' to floating type and scale it back,
+ then subtract this from the number being converted. This leaves the low
+ part. Convert that to integral type. */
+ const UWtype lo = dfa - (DFtype) hi * Wtype_MAXp1_F;
+
+ /* Assemble result from the two parts. */
+ return ((UDWtype) hi << W_TYPE_SIZE) | lo;
+#elif FLT_MANT_DIG < W_TYPE_SIZE
+ if (a < 1)
return 0;
+ if (a < Wtype_MAXp1_F)
+ return (UWtype)a;
+ if (a < Wtype_MAXp1_F * Wtype_MAXp1_F)
+ {
+ /* Since we know that there are fewer significant bits in the SFmode
+ quantity than in a word, we know that we can convert out all the
+ significant bits in one step, and thus avoid losing bits. */
- /* Compute high word of result, as a flonum. */
- b = (a / HIGH_WORD_COEFF);
- /* Convert that to fixed (but not to DWtype!),
- and shift it into the high word. */
- v = (UWtype) b;
- v <<= WORD_SIZE;
- /* Remove high part from the DFtype, leaving the low part as flonum. */
- a -= (DFtype) v;
- /* Convert that to fixed (but not to DWtype!) and add it in.
- Sometimes A comes out negative. This is significant, since
- A has more bits than a long int does. */
- if (a < 0)
- v -= (UWtype) (- a);
- else
- v += (UWtype) a;
- return v;
+ /* ??? This following loop essentially performs frexpf. If we could
+ use the real libm function, or poke at the actual bits of the fp
+ format, it would be significantly faster. */
+
+ UWtype shift = 0, counter;
+ SFtype msb;
+
+ a /= Wtype_MAXp1_F;
+ for (counter = W_TYPE_SIZE / 2; counter != 0; counter >>= 1)
+ {
+ SFtype counterf = (UWtype)1 << counter;
+ if (a >= counterf)
+ {
+ shift |= counter;
+ a /= counterf;
+ }
+ }
+
+ /* Rescale into the range of one word, extract the bits of that
+ one word, and shift the result into position. */
+ a *= Wtype_MAXp1_F;
+ counter = a;
+ return (DWtype)counter << shift;
+ }
+ return -1;
+#else
+# error
+#endif
}
#endif
-#ifdef L_fixsfdi
+#if defined(L_fixsfdi) && LIBGCC2_HAS_SF_MODE
DWtype
__fixsfdi (SFtype a)
{
}
#endif
-#if defined(L_floatdixf) && (LIBGCC2_LONG_DOUBLE_TYPE_SIZE == 96)
-#define WORD_SIZE (sizeof (Wtype) * BITS_PER_UNIT)
-#define HIGH_HALFWORD_COEFF (((UDWtype) 1) << (WORD_SIZE / 2))
-#define HIGH_WORD_COEFF (((UDWtype) 1) << WORD_SIZE)
-
+#if defined(L_floatdixf) && LIBGCC2_HAS_XF_MODE
XFtype
__floatdixf (DWtype u)
{
- XFtype d;
-
- d = (Wtype) (u >> WORD_SIZE);
- d *= HIGH_HALFWORD_COEFF;
- d *= HIGH_HALFWORD_COEFF;
- d += (UWtype) (u & (HIGH_WORD_COEFF - 1));
-
+#if W_TYPE_SIZE > XF_SIZE
+# error
+#endif
+ XFtype d = (Wtype) (u >> W_TYPE_SIZE);
+ d *= Wtype_MAXp1_F;
+ d += (UWtype)u;
return d;
}
#endif
-#if defined(L_floatditf) && (LIBGCC2_LONG_DOUBLE_TYPE_SIZE == 128)
-#define WORD_SIZE (sizeof (Wtype) * BITS_PER_UNIT)
-#define HIGH_HALFWORD_COEFF (((UDWtype) 1) << (WORD_SIZE / 2))
-#define HIGH_WORD_COEFF (((UDWtype) 1) << WORD_SIZE)
+#if defined(L_floatundixf) && LIBGCC2_HAS_XF_MODE
+XFtype
+__floatundixf (UDWtype u)
+{
+#if W_TYPE_SIZE > XF_SIZE
+# error
+#endif
+ XFtype d = (UWtype) (u >> W_TYPE_SIZE);
+ d *= Wtype_MAXp1_F;
+ d += (UWtype)u;
+ return d;
+}
+#endif
+#if defined(L_floatditf) && LIBGCC2_HAS_TF_MODE
TFtype
__floatditf (DWtype u)
{
- TFtype d;
-
- d = (Wtype) (u >> WORD_SIZE);
- d *= HIGH_HALFWORD_COEFF;
- d *= HIGH_HALFWORD_COEFF;
- d += (UWtype) (u & (HIGH_WORD_COEFF - 1));
+#if W_TYPE_SIZE > TF_SIZE
+# error
+#endif
+ TFtype d = (Wtype) (u >> W_TYPE_SIZE);
+ d *= Wtype_MAXp1_F;
+ d += (UWtype)u;
+ return d;
+}
+#endif
+#if defined(L_floatunditf) && LIBGCC2_HAS_TF_MODE
+TFtype
+__floatunditf (UDWtype u)
+{
+#if W_TYPE_SIZE > TF_SIZE
+# error
+#endif
+ TFtype d = (UWtype) (u >> W_TYPE_SIZE);
+ d *= Wtype_MAXp1_F;
+ d += (UWtype)u;
return d;
}
#endif
-#ifdef L_floatdidf
-#define WORD_SIZE (sizeof (Wtype) * BITS_PER_UNIT)
-#define HIGH_HALFWORD_COEFF (((UDWtype) 1) << (WORD_SIZE / 2))
-#define HIGH_WORD_COEFF (((UDWtype) 1) << WORD_SIZE)
+#if (defined(L_floatdisf) && LIBGCC2_HAS_SF_MODE) \
+ || (defined(L_floatdidf) && LIBGCC2_HAS_DF_MODE)
+#define DI_SIZE (W_TYPE_SIZE * 2)
+#define F_MODE_OK(SIZE) \
+ (SIZE < DI_SIZE \
+ && SIZE > (DI_SIZE - SIZE + FSSIZE) \
+ && !AVOID_FP_TYPE_CONVERSION(SIZE))
+#if defined(L_floatdisf)
+#define FUNC __floatdisf
+#define FSTYPE SFtype
+#define FSSIZE SF_SIZE
+#else
+#define FUNC __floatdidf
+#define FSTYPE DFtype
+#define FSSIZE DF_SIZE
+#endif
-DFtype
-__floatdidf (DWtype u)
+FSTYPE
+FUNC (DWtype u)
{
- DFtype d;
+#if FSSIZE >= W_TYPE_SIZE
+ /* When the word size is small, we never get any rounding error. */
+ FSTYPE f = (Wtype) (u >> W_TYPE_SIZE);
+ f *= Wtype_MAXp1_F;
+ f += (UWtype)u;
+ return f;
+#elif (LIBGCC2_HAS_DF_MODE && F_MODE_OK (DF_SIZE)) \
+ || (LIBGCC2_HAS_XF_MODE && F_MODE_OK (XF_SIZE)) \
+ || (LIBGCC2_HAS_TF_MODE && F_MODE_OK (TF_SIZE))
+
+#if (LIBGCC2_HAS_DF_MODE && F_MODE_OK (DF_SIZE))
+# define FSIZE DF_SIZE
+# define FTYPE DFtype
+#elif (LIBGCC2_HAS_XF_MODE && F_MODE_OK (XF_SIZE))
+# define FSIZE XF_SIZE
+# define FTYPE XFtype
+#elif (LIBGCC2_HAS_TF_MODE && F_MODE_OK (TF_SIZE))
+# define FSIZE TF_SIZE
+# define FTYPE TFtype
+#else
+# error
+#endif
- d = (Wtype) (u >> WORD_SIZE);
- d *= HIGH_HALFWORD_COEFF;
- d *= HIGH_HALFWORD_COEFF;
- d += (UWtype) (u & (HIGH_WORD_COEFF - 1));
+#define REP_BIT ((UDWtype) 1 << (DI_SIZE - FSIZE))
- return d;
+ /* Protect against double-rounding error.
+ Represent any low-order bits, that might be truncated by a bit that
+ won't be lost. The bit can go in anywhere below the rounding position
+ of the FSTYPE. A fixed mask and bit position handles all usual
+ configurations. */
+ if (! (- ((DWtype) 1 << FSIZE) < u
+ && u < ((DWtype) 1 << FSIZE)))
+ {
+ if ((UDWtype) u & (REP_BIT - 1))
+ {
+ u &= ~ (REP_BIT - 1);
+ u |= REP_BIT;
+ }
+ }
+
+ /* Do the calculation in a wider type so that we don't lose any of
+ the precision of the high word while multiplying it. */
+ FTYPE f = (Wtype) (u >> W_TYPE_SIZE);
+ f *= Wtype_MAXp1_F;
+ f += (UWtype)u;
+ return (FSTYPE) f;
+#else
+#if FSSIZE >= W_TYPE_SIZE - 2
+# error
+#endif
+ /* Finally, the word size is larger than the number of bits in the
+ required FSTYPE, and we've got no suitable wider type. The only
+ way to avoid double rounding is to special case the
+ extraction. */
+
+ /* If there are no high bits set, fall back to one conversion. */
+ if ((Wtype)u == u)
+ return (FSTYPE)(Wtype)u;
+
+ /* Otherwise, find the power of two. */
+ Wtype hi = u >> W_TYPE_SIZE;
+ if (hi < 0)
+ hi = -hi;
+
+ UWtype count, shift;
+ count_leading_zeros (count, hi);
+
+ /* No leading bits means u == minimum. */
+ if (count == 0)
+ return -(Wtype_MAXp1_F * (Wtype_MAXp1_F / 2));
+
+ shift = 1 + W_TYPE_SIZE - count;
+
+ /* Shift down the most significant bits. */
+ hi = u >> shift;
+
+ /* If we lost any nonzero bits, set the lsb to ensure correct rounding. */
+ if ((UWtype)u << (W_TYPE_SIZE - shift))
+ hi |= 1;
+
+ /* Convert the one word of data, and rescale. */
+ FSTYPE f = hi, e;
+ if (shift == W_TYPE_SIZE)
+ e = Wtype_MAXp1_F;
+ /* The following two cases could be merged if we knew that the target
+ supported a native unsigned->float conversion. More often, we only
+ have a signed conversion, and have to add extra fixup code. */
+ else if (shift == W_TYPE_SIZE - 1)
+ e = Wtype_MAXp1_F / 2;
+ else
+ e = (Wtype)1 << shift;
+ return f * e;
+#endif
}
#endif
-#ifdef L_floatdisf
-#define WORD_SIZE (sizeof (Wtype) * BITS_PER_UNIT)
-#define HIGH_HALFWORD_COEFF (((UDWtype) 1) << (WORD_SIZE / 2))
-#define HIGH_WORD_COEFF (((UDWtype) 1) << WORD_SIZE)
-
-#define DI_SIZE (sizeof (DWtype) * BITS_PER_UNIT)
-#define DF_SIZE DBL_MANT_DIG
-#define SF_SIZE FLT_MANT_DIG
+#if (defined(L_floatundisf) && LIBGCC2_HAS_SF_MODE) \
+ || (defined(L_floatundidf) && LIBGCC2_HAS_DF_MODE)
+#define DI_SIZE (W_TYPE_SIZE * 2)
+#define F_MODE_OK(SIZE) \
+ (SIZE < DI_SIZE \
+ && SIZE > (DI_SIZE - SIZE + FSSIZE) \
+ && !AVOID_FP_TYPE_CONVERSION(SIZE))
+#if defined(L_floatundisf)
+#define FUNC __floatundisf
+#define FSTYPE SFtype
+#define FSSIZE SF_SIZE
+#else
+#define FUNC __floatundidf
+#define FSTYPE DFtype
+#define FSSIZE DF_SIZE
+#endif
-SFtype
-__floatdisf (DWtype u)
+FSTYPE
+FUNC (UDWtype u)
{
- /* Do the calculation in DFmode
- so that we don't lose any of the precision of the high word
- while multiplying it. */
- DFtype f;
+#if FSSIZE >= W_TYPE_SIZE
+ /* When the word size is small, we never get any rounding error. */
+ FSTYPE f = (UWtype) (u >> W_TYPE_SIZE);
+ f *= Wtype_MAXp1_F;
+ f += (UWtype)u;
+ return f;
+#elif (LIBGCC2_HAS_DF_MODE && F_MODE_OK (DF_SIZE)) \
+ || (LIBGCC2_HAS_XF_MODE && F_MODE_OK (XF_SIZE)) \
+ || (LIBGCC2_HAS_TF_MODE && F_MODE_OK (TF_SIZE))
+
+#if (LIBGCC2_HAS_DF_MODE && F_MODE_OK (DF_SIZE))
+# define FSIZE DF_SIZE
+# define FTYPE DFtype
+#elif (LIBGCC2_HAS_XF_MODE && F_MODE_OK (XF_SIZE))
+# define FSIZE XF_SIZE
+# define FTYPE XFtype
+#elif (LIBGCC2_HAS_TF_MODE && F_MODE_OK (TF_SIZE))
+# define FSIZE TF_SIZE
+# define FTYPE TFtype
+#else
+# error
+#endif
+
+#define REP_BIT ((UDWtype) 1 << (DI_SIZE - FSIZE))
/* Protect against double-rounding error.
- Represent any low-order bits, that might be truncated in DFmode,
- by a bit that won't be lost. The bit can go in anywhere below the
- rounding position of the SFmode. A fixed mask and bit position
- handles all usual configurations. It doesn't handle the case
- of 128-bit DImode, however. */
- if (DF_SIZE < DI_SIZE
- && DF_SIZE > (DI_SIZE - DF_SIZE + SF_SIZE))
+ Represent any low-order bits, that might be truncated by a bit that
+ won't be lost. The bit can go in anywhere below the rounding position
+ of the FSTYPE. A fixed mask and bit position handles all usual
+ configurations. */
+ if (u >= ((UDWtype) 1 << FSIZE))
{
-#define REP_BIT ((UDWtype) 1 << (DI_SIZE - DF_SIZE))
- if (! (- ((DWtype) 1 << DF_SIZE) < u
- && u < ((DWtype) 1 << DF_SIZE)))
+ if ((UDWtype) u & (REP_BIT - 1))
{
- if ((UDWtype) u & (REP_BIT - 1))
- u |= REP_BIT;
+ u &= ~ (REP_BIT - 1);
+ u |= REP_BIT;
}
}
- f = (Wtype) (u >> WORD_SIZE);
- f *= HIGH_HALFWORD_COEFF;
- f *= HIGH_HALFWORD_COEFF;
- f += (UWtype) (u & (HIGH_WORD_COEFF - 1));
- return (SFtype) f;
+ /* Do the calculation in a wider type so that we don't lose any of
+ the precision of the high word while multiplying it. */
+ FTYPE f = (UWtype) (u >> W_TYPE_SIZE);
+ f *= Wtype_MAXp1_F;
+ f += (UWtype)u;
+ return (FSTYPE) f;
+#else
+#if FSSIZE == W_TYPE_SIZE - 1
+# error
+#endif
+ /* Finally, the word size is larger than the number of bits in the
+ required FSTYPE, and we've got no suitable wider type. The only
+ way to avoid double rounding is to special case the
+ extraction. */
+
+ /* If there are no high bits set, fall back to one conversion. */
+ if ((UWtype)u == u)
+ return (FSTYPE)(UWtype)u;
+
+ /* Otherwise, find the power of two. */
+ UWtype hi = u >> W_TYPE_SIZE;
+
+ UWtype count, shift;
+ count_leading_zeros (count, hi);
+
+ shift = W_TYPE_SIZE - count;
+
+ /* Shift down the most significant bits. */
+ hi = u >> shift;
+
+ /* If we lost any nonzero bits, set the lsb to ensure correct rounding. */
+ if ((UWtype)u << (W_TYPE_SIZE - shift))
+ hi |= 1;
+
+ /* Convert the one word of data, and rescale. */
+ FSTYPE f = hi, e;
+ if (shift == W_TYPE_SIZE)
+ e = Wtype_MAXp1_F;
+ /* The following two cases could be merged if we knew that the target
+ supported a native unsigned->float conversion. More often, we only
+ have a signed conversion, and have to add extra fixup code. */
+ else if (shift == W_TYPE_SIZE - 1)
+ e = Wtype_MAXp1_F / 2;
+ else
+ e = (Wtype)1 << shift;
+ return f * e;
+#endif
}
#endif
-#if defined(L_fixunsxfsi) && LIBGCC2_LONG_DOUBLE_TYPE_SIZE == 96
+#if defined(L_fixunsxfsi) && LIBGCC2_HAS_XF_MODE
/* Reenable the normal types, in case limits.h needs them. */
#undef char
#undef short
}
#endif
-#ifdef L_fixunsdfsi
+#if defined(L_fixunsdfsi) && LIBGCC2_HAS_DF_MODE
/* Reenable the normal types, in case limits.h needs them. */
#undef char
#undef short
}
#endif
-#ifdef L_fixunssfsi
+#if defined(L_fixunssfsi) && LIBGCC2_HAS_SF_MODE
/* Reenable the normal types, in case limits.h needs them. */
#undef char
#undef short
}
#endif
\f
+/* Integer power helper used from __builtin_powi for non-constant
+ exponents. */
+
+#if (defined(L_powisf2) && LIBGCC2_HAS_SF_MODE) \
+ || (defined(L_powidf2) && LIBGCC2_HAS_DF_MODE) \
+ || (defined(L_powixf2) && LIBGCC2_HAS_XF_MODE) \
+ || (defined(L_powitf2) && LIBGCC2_HAS_TF_MODE)
+# if defined(L_powisf2)
+# define TYPE SFtype
+# define NAME __powisf2
+# elif defined(L_powidf2)
+# define TYPE DFtype
+# define NAME __powidf2
+# elif defined(L_powixf2)
+# define TYPE XFtype
+# define NAME __powixf2
+# elif defined(L_powitf2)
+# define TYPE TFtype
+# define NAME __powitf2
+# endif
+
+#undef int
+#undef unsigned
+TYPE
+NAME (TYPE x, int m)
+{
+ unsigned int n = m < 0 ? -m : m;
+ TYPE y = n % 2 ? x : 1;
+ while (n >>= 1)
+ {
+ x = x * x;
+ if (n % 2)
+ y = y * x;
+ }
+ return m < 0 ? 1/y : y;
+}
+
+#endif
+\f
+#if ((defined(L_mulsc3) || defined(L_divsc3)) && LIBGCC2_HAS_SF_MODE) \
+ || ((defined(L_muldc3) || defined(L_divdc3)) && LIBGCC2_HAS_DF_MODE) \
+ || ((defined(L_mulxc3) || defined(L_divxc3)) && LIBGCC2_HAS_XF_MODE) \
+ || ((defined(L_multc3) || defined(L_divtc3)) && LIBGCC2_HAS_TF_MODE)
+
+#undef float
+#undef double
+#undef long
+
+#if defined(L_mulsc3) || defined(L_divsc3)
+# define MTYPE SFtype
+# define CTYPE SCtype
+# define MODE sc
+# define CEXT f
+# define NOTRUNC __FLT_EVAL_METHOD__ == 0
+#elif defined(L_muldc3) || defined(L_divdc3)
+# define MTYPE DFtype
+# define CTYPE DCtype
+# define MODE dc
+# if LIBGCC2_LONG_DOUBLE_TYPE_SIZE == 64
+# define CEXT l
+# define NOTRUNC 1
+# else
+# define CEXT
+# define NOTRUNC __FLT_EVAL_METHOD__ == 0 || __FLT_EVAL_METHOD__ == 1
+# endif
+#elif defined(L_mulxc3) || defined(L_divxc3)
+# define MTYPE XFtype
+# define CTYPE XCtype
+# define MODE xc
+# define CEXT l
+# define NOTRUNC 1
+#elif defined(L_multc3) || defined(L_divtc3)
+# define MTYPE TFtype
+# define CTYPE TCtype
+# define MODE tc
+# if LIBGCC2_LONG_DOUBLE_TYPE_SIZE == 128
+# define CEXT l
+# else
+# define CEXT LIBGCC2_TF_CEXT
+# endif
+# define NOTRUNC 1
+#else
+# error
+#endif
+
+#define CONCAT3(A,B,C) _CONCAT3(A,B,C)
+#define _CONCAT3(A,B,C) A##B##C
+
+#define CONCAT2(A,B) _CONCAT2(A,B)
+#define _CONCAT2(A,B) A##B
+
+/* All of these would be present in a full C99 implementation of <math.h>
+ and <complex.h>. Our problem is that only a few systems have such full
+ implementations. Further, libgcc_s.so isn't currently linked against
+ libm.so, and even for systems that do provide full C99, the extra overhead
+ of all programs using libgcc having to link against libm. So avoid it. */
+
+#define isnan(x) __builtin_expect ((x) != (x), 0)
+#define isfinite(x) __builtin_expect (!isnan((x) - (x)), 1)
+#define isinf(x) __builtin_expect (!isnan(x) & !isfinite(x), 0)
+
+#define INFINITY CONCAT2(__builtin_huge_val, CEXT) ()
+#define I 1i
+
+/* Helpers to make the following code slightly less gross. */
+#define COPYSIGN CONCAT2(__builtin_copysign, CEXT)
+#define FABS CONCAT2(__builtin_fabs, CEXT)
+
+/* Verify that MTYPE matches up with CEXT. */
+extern void *compile_type_assert[sizeof(INFINITY) == sizeof(MTYPE) ? 1 : -1];
+
+/* Ensure that we've lost any extra precision. */
+#if NOTRUNC
+# define TRUNC(x)
+#else
+# define TRUNC(x) __asm__ ("" : "=m"(x) : "m"(x))
+#endif
+
+#if defined(L_mulsc3) || defined(L_muldc3) \
+ || defined(L_mulxc3) || defined(L_multc3)
+
+CTYPE
+CONCAT3(__mul,MODE,3) (MTYPE a, MTYPE b, MTYPE c, MTYPE d)
+{
+ MTYPE ac, bd, ad, bc, x, y;
+ CTYPE res;
+
+ ac = a * c;
+ bd = b * d;
+ ad = a * d;
+ bc = b * c;
+
+ TRUNC (ac);
+ TRUNC (bd);
+ TRUNC (ad);
+ TRUNC (bc);
+
+ x = ac - bd;
+ y = ad + bc;
+
+ if (isnan (x) && isnan (y))
+ {
+ /* Recover infinities that computed as NaN + iNaN. */
+ _Bool recalc = 0;
+ if (isinf (a) || isinf (b))
+ {
+ /* z is infinite. "Box" the infinity and change NaNs in
+ the other factor to 0. */
+ a = COPYSIGN (isinf (a) ? 1 : 0, a);
+ b = COPYSIGN (isinf (b) ? 1 : 0, b);
+ if (isnan (c)) c = COPYSIGN (0, c);
+ if (isnan (d)) d = COPYSIGN (0, d);
+ recalc = 1;
+ }
+ if (isinf (c) || isinf (d))
+ {
+ /* w is infinite. "Box" the infinity and change NaNs in
+ the other factor to 0. */
+ c = COPYSIGN (isinf (c) ? 1 : 0, c);
+ d = COPYSIGN (isinf (d) ? 1 : 0, d);
+ if (isnan (a)) a = COPYSIGN (0, a);
+ if (isnan (b)) b = COPYSIGN (0, b);
+ recalc = 1;
+ }
+ if (!recalc
+ && (isinf (ac) || isinf (bd)
+ || isinf (ad) || isinf (bc)))
+ {
+ /* Recover infinities from overflow by changing NaNs to 0. */
+ if (isnan (a)) a = COPYSIGN (0, a);
+ if (isnan (b)) b = COPYSIGN (0, b);
+ if (isnan (c)) c = COPYSIGN (0, c);
+ if (isnan (d)) d = COPYSIGN (0, d);
+ recalc = 1;
+ }
+ if (recalc)
+ {
+ x = INFINITY * (a * c - b * d);
+ y = INFINITY * (a * d + b * c);
+ }
+ }
+
+ __real__ res = x;
+ __imag__ res = y;
+ return res;
+}
+#endif /* complex multiply */
+
+#if defined(L_divsc3) || defined(L_divdc3) \
+ || defined(L_divxc3) || defined(L_divtc3)
+
+CTYPE
+CONCAT3(__div,MODE,3) (MTYPE a, MTYPE b, MTYPE c, MTYPE d)
+{
+ MTYPE denom, ratio, x, y;
+ CTYPE res;
+
+ /* ??? We can get better behavior from logarithmic scaling instead of
+ the division. But that would mean starting to link libgcc against
+ libm. We could implement something akin to ldexp/frexp as gcc builtins
+ fairly easily... */
+ if (FABS (c) < FABS (d))
+ {
+ ratio = c / d;
+ denom = (c * ratio) + d;
+ x = ((a * ratio) + b) / denom;
+ y = ((b * ratio) - a) / denom;
+ }
+ else
+ {
+ ratio = d / c;
+ denom = (d * ratio) + c;
+ x = ((b * ratio) + a) / denom;
+ y = (b - (a * ratio)) / denom;
+ }
+
+ /* Recover infinities and zeros that computed as NaN+iNaN; the only cases
+ are nonzero/zero, infinite/finite, and finite/infinite. */
+ if (isnan (x) && isnan (y))
+ {
+ if (c == 0.0 && d == 0.0 && (!isnan (a) || !isnan (b)))
+ {
+ x = COPYSIGN (INFINITY, c) * a;
+ y = COPYSIGN (INFINITY, c) * b;
+ }
+ else if ((isinf (a) || isinf (b)) && isfinite (c) && isfinite (d))
+ {
+ a = COPYSIGN (isinf (a) ? 1 : 0, a);
+ b = COPYSIGN (isinf (b) ? 1 : 0, b);
+ x = INFINITY * (a * c + b * d);
+ y = INFINITY * (b * c - a * d);
+ }
+ else if ((isinf (c) || isinf (d)) && isfinite (a) && isfinite (b))
+ {
+ c = COPYSIGN (isinf (c) ? 1 : 0, c);
+ d = COPYSIGN (isinf (d) ? 1 : 0, d);
+ x = 0.0 * (a * c + b * d);
+ y = 0.0 * (b * c - a * d);
+ }
+ }
+
+ __real__ res = x;
+ __imag__ res = y;
+ return res;
+}
+#endif /* complex divide */
+
+#endif /* all complex float routines */
+\f
/* From here on down, the routines use normal data types. */
#define SItype bogus_type
{
while (size > 0)
{
- unsigned char c1 = *s1++, c2 = *s2++;
+ const unsigned char c1 = *s1++, c2 = *s2++;
if (c1 != c2)
return c1 - c2;
size--;
#endif
#endif
-#ifdef L_bb
-
-struct bb_function_info {
- long checksum;
- int arc_count;
- const char *name;
-};
-
-/* Structure emitted by -a */
-struct bb
-{
- long zero_word;
- const char *filename;
- gcov_type *counts;
- long ncounts;
- struct bb *next;
-
- /* Older GCC's did not emit these fields. */
- long sizeof_bb;
- struct bb_function_info *function_infos;
-};
-
-#ifndef inhibit_libc
-
-/* Simple minded basic block profiling output dumper for
- systems that don't provide tcov support. At present,
- it requires atexit and stdio. */
-
-#undef NULL /* Avoid errors if stdio.h and our stddef.h mismatch. */
-#include <stdio.h>
-
-#include "gbl-ctors.h"
-#include "gcov-io.h"
-#include <string.h>
-#ifdef TARGET_HAS_F_SETLKW
-#include <fcntl.h>
-#include <errno.h>
-#endif
-
-#include <gthr.h>
-
-static struct bb *bb_head;
-
-int __global_counters = 0, __gthreads_active = 0;
-
-void
-__bb_exit_func (void)
-{
- FILE *da_file;
- struct bb *ptr;
- long n_counters_p = 0;
- gcov_type max_counter_p = 0;
- gcov_type sum_counters_p = 0;
-
- if (bb_head == 0)
- return;
-
- /* Calculate overall "statistics". */
-
- for (ptr = bb_head; ptr != (struct bb *) 0; ptr = ptr->next)
- {
- int i;
-
- n_counters_p += ptr->ncounts;
-
- for (i = 0; i < ptr->ncounts; i++)
- {
- sum_counters_p += ptr->counts[i];
-
- if (ptr->counts[i] > max_counter_p)
- max_counter_p = ptr->counts[i];
- }
- }
-
- for (ptr = bb_head; ptr != (struct bb *) 0; ptr = ptr->next)
- {
- gcov_type max_counter_o = 0;
- gcov_type sum_counters_o = 0;
- int i;
-
- /* Calculate the per-object statistics. */
-
- for (i = 0; i < ptr->ncounts; i++)
- {
- sum_counters_o += ptr->counts[i];
-
- if (ptr->counts[i] > max_counter_o)
- max_counter_o = ptr->counts[i];
- }
-
- /* open the file for appending, creating it if necessary. */
- da_file = fopen (ptr->filename, "ab");
- /* Some old systems might not allow the 'b' mode modifier.
- Therefore, try to open without it. This can lead to a race
- condition so that when you delete and re-create the file, the
- file might be opened in text mode, but then, you shouldn't
- delete the file in the first place. */
- if (da_file == 0)
- da_file = fopen (ptr->filename, "a");
- if (da_file == 0)
- {
- fprintf (stderr, "arc profiling: Can't open output file %s.\n",
- ptr->filename);
- continue;
- }
-
- /* After a fork, another process might try to read and/or write
- the same file simultanously. So if we can, lock the file to
- avoid race conditions. */
-#if defined (TARGET_HAS_F_SETLKW)
- {
- struct flock s_flock;
-
- s_flock.l_type = F_WRLCK;
- s_flock.l_whence = SEEK_SET;
- s_flock.l_start = 0;
- s_flock.l_len = 1;
- s_flock.l_pid = getpid ();
-
- while (fcntl (fileno (da_file), F_SETLKW, &s_flock)
- && errno == EINTR);
- }
-#endif
-
- if (__write_long (-123, da_file, 4) != 0) /* magic */
- {
- fprintf (stderr, "arc profiling: Error writing output file %s.\n",
- ptr->filename);
- }
- else
- {
-
- struct bb_function_info *fn_info;
- gcov_type *count_ptr = ptr->counts;
- int i;
- int count_functions = 0;
-
- for (fn_info = ptr->function_infos; fn_info->arc_count != -1;
- fn_info++)
- count_functions++;
-
- /* number of functions in this block. */
- __write_long (count_functions, da_file, 4);
-
- /* length of extra data in bytes. */
- __write_long ((4 + 8 + 8) + (4 + 8 + 8), da_file, 4);
-
- /* overall statistics. */
- /* number of counters. */
- __write_long (n_counters_p, da_file, 4);
- /* sum of counters. */
- __write_gcov_type (sum_counters_p, da_file, 8);
- /* maximal counter. */
- __write_gcov_type (max_counter_p, da_file, 8);
-
- /* per-object statistics. */
- /* number of counters. */
- __write_long (ptr->ncounts, da_file, 4);
- /* sum of counters. */
- __write_gcov_type (sum_counters_o, da_file, 8);
- /* maximal counter. */
- __write_gcov_type (max_counter_o, da_file, 8);
-
- /* write execution counts for each function. */
-
- for (fn_info = ptr->function_infos; fn_info->arc_count != -1;
- fn_info++)
- {
- /* new function. */
- if (__write_gcov_string
- (fn_info->name, strlen (fn_info->name), da_file, -1) != 0)
- {
- fprintf (stderr,
- "arc profiling: Error writing output file %s.\n",
- ptr->filename);
- break;
- }
-
- if (__write_long (fn_info->checksum, da_file, 4) != 0)
- {
- fprintf (stderr,
- "arc profiling: Error writing output file %s.\n",
- ptr->filename);
- break;
- }
-
- if (__write_long (fn_info->arc_count, da_file, 4) != 0)
- {
- fprintf (stderr,
- "arc profiling: Error writing output file %s.\n",
- ptr->filename);
- break;
- }
-
- for (i = fn_info->arc_count; i > 0; i--, count_ptr++)
- {
- if (__write_gcov_type (*count_ptr, da_file, 8) != 0)
- break;
- }
-
- if (i) /* there was an error */
- {
- fprintf (stderr,
- "arc profiling: Error writing output file %s.\n",
- ptr->filename);
- break;
- }
- }
- }
-
- if (fclose (da_file) != 0)
- fprintf (stderr, "arc profiling: Error closing output file %s.\n",
- ptr->filename);
- }
-}
-
-void
-__bb_init_func (struct bb *blocks)
-{
- /* User is supposed to check whether the first word is non-0,
- but just in case.... */
-
- if (blocks->zero_word)
- return;
-
- /* Initialize destructor and per-thread data. */
- if (!bb_head)
- atexit (__bb_exit_func);
-
- /* Set up linked list. */
- blocks->zero_word = 1;
- blocks->next = bb_head;
- bb_head = blocks;
-}
-
-/* Called before fork or exec - write out profile information gathered so
- far and reset it to zero. This avoids duplication or loss of the
- profile information gathered so far. */
-void
-__bb_fork_func (void)
-{
- struct bb *ptr;
-
- __bb_exit_func ();
- for (ptr = bb_head; ptr != (struct bb *) 0; ptr = ptr->next)
- {
- long i;
- for (i = ptr->ncounts - 1; i >= 0; i--)
- ptr->counts[i] = 0;
- }
-}
-
-#endif /* not inhibit_libc */
-#endif /* L_bb */
\f
#ifdef L_clear_cache
/* Clear part of an instruction cache. */
-#define INSN_CACHE_PLANE_SIZE (INSN_CACHE_SIZE / INSN_CACHE_DEPTH)
-
void
__clear_cache (char *beg __attribute__((__unused__)),
char *end __attribute__((__unused__)))
{
#ifdef CLEAR_INSN_CACHE
CLEAR_INSN_CACHE (beg, end);
-#else
-#ifdef INSN_CACHE_SIZE
- static char array[INSN_CACHE_SIZE + INSN_CACHE_PLANE_SIZE + INSN_CACHE_LINE_WIDTH];
- static int initialized;
- int offset;
- void *start_addr
- void *end_addr;
- typedef (*function_ptr) (void);
-
-#if (INSN_CACHE_SIZE / INSN_CACHE_LINE_WIDTH) < 16
- /* It's cheaper to clear the whole cache.
- Put in a series of jump instructions so that calling the beginning
- of the cache will clear the whole thing. */
-
- if (! initialized)
- {
- int ptr = (((int) array + INSN_CACHE_LINE_WIDTH - 1)
- & -INSN_CACHE_LINE_WIDTH);
- int end_ptr = ptr + INSN_CACHE_SIZE;
-
- while (ptr < end_ptr)
- {
- *(INSTRUCTION_TYPE *)ptr
- = JUMP_AHEAD_INSTRUCTION + INSN_CACHE_LINE_WIDTH;
- ptr += INSN_CACHE_LINE_WIDTH;
- }
- *(INSTRUCTION_TYPE *) (ptr - INSN_CACHE_LINE_WIDTH) = RETURN_INSTRUCTION;
-
- initialized = 1;
- }
-
- /* Call the beginning of the sequence. */
- (((function_ptr) (((int) array + INSN_CACHE_LINE_WIDTH - 1)
- & -INSN_CACHE_LINE_WIDTH))
- ());
-
-#else /* Cache is large. */
-
- if (! initialized)
- {
- int ptr = (((int) array + INSN_CACHE_LINE_WIDTH - 1)
- & -INSN_CACHE_LINE_WIDTH);
-
- while (ptr < (int) array + sizeof array)
- {
- *(INSTRUCTION_TYPE *)ptr = RETURN_INSTRUCTION;
- ptr += INSN_CACHE_LINE_WIDTH;
- }
-
- initialized = 1;
- }
-
- /* Find the location in array that occupies the same cache line as BEG. */
-
- offset = ((int) beg & -INSN_CACHE_LINE_WIDTH) & (INSN_CACHE_PLANE_SIZE - 1);
- start_addr = (((int) (array + INSN_CACHE_PLANE_SIZE - 1)
- & -INSN_CACHE_PLANE_SIZE)
- + offset);
-
- /* Compute the cache alignment of the place to stop clearing. */
-#if 0 /* This is not needed for gcc's purposes. */
- /* If the block to clear is bigger than a cache plane,
- we clear the entire cache, and OFFSET is already correct. */
- if (end < beg + INSN_CACHE_PLANE_SIZE)
-#endif
- offset = (((int) (end + INSN_CACHE_LINE_WIDTH - 1)
- & -INSN_CACHE_LINE_WIDTH)
- & (INSN_CACHE_PLANE_SIZE - 1));
-
-#if INSN_CACHE_DEPTH > 1
- end_addr = (start_addr & -INSN_CACHE_PLANE_SIZE) + offset;
- if (end_addr <= start_addr)
- end_addr += INSN_CACHE_PLANE_SIZE;
-
- for (plane = 0; plane < INSN_CACHE_DEPTH; plane++)
- {
- int addr = start_addr + plane * INSN_CACHE_PLANE_SIZE;
- int stop = end_addr + plane * INSN_CACHE_PLANE_SIZE;
-
- while (addr != stop)
- {
- /* Call the return instruction at ADDR. */
- ((function_ptr) addr) ();
-
- addr += INSN_CACHE_LINE_WIDTH;
- }
- }
-#else /* just one plane */
- do
- {
- /* Call the return instruction at START_ADDR. */
- ((function_ptr) start_addr) ();
-
- start_addr += INSN_CACHE_LINE_WIDTH;
- }
- while ((start_addr % INSN_CACHE_SIZE) != offset);
-#endif /* just one plane */
-#endif /* Cache is large */
-#endif /* Cache exists */
#endif /* CLEAR_INSN_CACHE */
}
#endif /* L_clear_cache */
\f
+#ifdef L_enable_execute_stack
+/* Attempt to turn on execute permission for the stack. */
+
+#ifdef ENABLE_EXECUTE_STACK
+ ENABLE_EXECUTE_STACK
+#else
+void
+__enable_execute_stack (void *addr __attribute__((__unused__)))
+{}
+#endif /* ENABLE_EXECUTE_STACK */
+
+#endif /* L_enable_execute_stack */
+\f
#ifdef L_trampoline
/* Jump to a trampoline, loading the static chain address. */
-#if defined(WINNT) && ! defined(__CYGWIN__) && ! defined (_UWIN)
+#if defined(WINNT) && ! defined(__CYGWIN__)
+int getpagesize (void);
+int mprotect (char *,int, int);
-long
+int
getpagesize (void)
{
#ifdef _ALPHA_
#endif
}
-#ifdef __i386__
-extern int VirtualProtect (char *, int, int, int *) __attribute__((stdcall));
-#endif
-
int
mprotect (char *addr, int len, int prot)
{
- int np, op;
+ DWORD np, op;
if (prot == 7)
np = 0x40;
np = 0x02;
else if (prot == 0)
np = 0x01;
+ else
+ return -1;
if (VirtualProtect (addr, len, np, &op))
return 0;
return -1;
}
-#endif /* WINNT && ! __CYGWIN__ && ! _UWIN */
+#endif /* WINNT && ! __CYGWIN__ */
#ifdef TRANSFER_FROM_TRAMPOLINE
TRANSFER_FROM_TRAMPOLINE
#endif
-
-#if defined (NeXT) && defined (__MACH__)
-
-/* Make stack executable so we can call trampolines on stack.
- This is called from INITIALIZE_TRAMPOLINE in next.h. */
-#ifdef NeXTStep21
- #include <mach.h>
-#else
- #include <mach/mach.h>
-#endif
-
-void
-__enable_execute_stack (char *addr)
-{
- kern_return_t r;
- char *eaddr = addr + TRAMPOLINE_SIZE;
- vm_address_t a = (vm_address_t) addr;
-
- /* turn on execute access on stack */
- r = vm_protect (task_self (), a, TRAMPOLINE_SIZE, FALSE, VM_PROT_ALL);
- if (r != KERN_SUCCESS)
- {
- mach_error("vm_protect VM_PROT_ALL", r);
- exit(1);
- }
-
- /* We inline the i-cache invalidation for speed */
-
-#ifdef CLEAR_INSN_CACHE
- CLEAR_INSN_CACHE (addr, eaddr);
-#else
- __clear_cache ((int) addr, (int) eaddr);
-#endif
-}
-
-#endif /* defined (NeXT) && defined (__MACH__) */
-
-#ifdef __convex__
-
-/* Make stack executable so we can call trampolines on stack.
- This is called from INITIALIZE_TRAMPOLINE in convex.h. */
-
-#include <sys/mman.h>
-#include <sys/vmparam.h>
-#include <machine/machparam.h>
-
-void
-__enable_execute_stack (void)
-{
- int fp;
- static unsigned lowest = USRSTACK;
- unsigned current = (unsigned) &fp & -NBPG;
-
- if (lowest > current)
- {
- unsigned len = lowest - current;
- mremap (current, &len, PROT_READ | PROT_WRITE | PROT_EXEC, MAP_PRIVATE);
- lowest = current;
- }
-
- /* Clear instruction cache in case an old trampoline is in it. */
- asm ("pich");
-}
-#endif /* __convex__ */
-
-#ifdef __sysV88__
-
-/* Modified from the convex -code above. */
-
-#include <sys/param.h>
-#include <errno.h>
-#include <sys/m88kbcs.h>
-
-void
-__enable_execute_stack (void)
-{
- int save_errno;
- static unsigned long lowest = USRSTACK;
- unsigned long current = (unsigned long) &save_errno & -NBPC;
-
- /* Ignore errno being set. memctl sets errno to EINVAL whenever the
- address is seen as 'negative'. That is the case with the stack. */
-
- save_errno=errno;
- if (lowest > current)
- {
- unsigned len=lowest-current;
- memctl(current,len,MCT_TEXT);
- lowest = current;
- }
- else
- memctl(current,NBPC,MCT_TEXT);
- errno=save_errno;
-}
-
-#endif /* __sysV88__ */
-
-#ifdef __sysV68__
-
-#include <sys/signal.h>
-#include <errno.h>
-
-/* Motorola forgot to put memctl.o in the libp version of libc881.a,
- so define it here, because we need it in __clear_insn_cache below */
-/* On older versions of this OS, no memctl or MCT_TEXT are defined;
- hence we enable this stuff only if MCT_TEXT is #define'd. */
-
-#ifdef MCT_TEXT
-asm("\n\
- global memctl\n\
-memctl:\n\
- movq &75,%d0\n\
- trap &0\n\
- bcc.b noerror\n\
- jmp cerror%\n\
-noerror:\n\
- movq &0,%d0\n\
- rts");
-#endif
-
-/* Clear instruction cache so we can call trampolines on stack.
- This is called from FINALIZE_TRAMPOLINE in mot3300.h. */
-
-void
-__clear_insn_cache (void)
-{
-#ifdef MCT_TEXT
- int save_errno;
-
- /* Preserve errno, because users would be surprised to have
- errno changing without explicitly calling any system-call. */
- save_errno = errno;
-
- /* Keep it simple : memctl (MCT_TEXT) always fully clears the insn cache.
- No need to use an address derived from _start or %sp, as 0 works also. */
- memctl(0, 4096, MCT_TEXT);
- errno = save_errno;
-#endif
-}
-
-#endif /* __sysV68__ */
-
-#ifdef __pyr__
-
-#undef NULL /* Avoid errors if stdio.h and our stddef.h mismatch. */
-#include <stdio.h>
-#include <sys/mman.h>
-#include <sys/types.h>
-#include <sys/param.h>
-#include <sys/vmmac.h>
-
-/* Modified from the convex -code above.
- mremap promises to clear the i-cache. */
-
-void
-__enable_execute_stack (void)
-{
- int fp;
- if (mprotect (((unsigned int)&fp/PAGSIZ)*PAGSIZ, PAGSIZ,
- PROT_READ|PROT_WRITE|PROT_EXEC))
- {
- perror ("mprotect in __enable_execute_stack");
- fflush (stderr);
- abort ();
- }
-}
-#endif /* __pyr__ */
-
-#if defined (sony_news) && defined (SYSTYPE_BSD)
-
-#include <stdio.h>
-#include <sys/types.h>
-#include <sys/param.h>
-#include <syscall.h>
-#include <machine/sysnews.h>
-
-/* cacheflush function for NEWS-OS 4.2.
- This function is called from trampoline-initialize code
- defined in config/mips/mips.h. */
-
-void
-cacheflush (char *beg, int size, int flag)
-{
- if (syscall (SYS_sysnews, NEWS_CACHEFLUSH, beg, size, FLUSH_BCACHE))
- {
- perror ("cache_flush");
- fflush (stderr);
- abort ();
- }
-}
-
-#endif /* sony_news */
#endif /* L_trampoline */
\f
#ifndef __CYGWIN__
#ifdef L__main
#include "gbl-ctors.h"
+
/* Some systems use __main in a way incompatible with its use in gcc, in these
cases use the macros NAME__MAIN to give a quoted symbol and SYMBOL__MAIN to
give the same symbol without quotes for an alternative entry point. You
#define SYMBOL__MAIN __main
#endif
-#ifdef INIT_SECTION_ASM_OP
+#if defined (INIT_SECTION_ASM_OP) || defined (INIT_ARRAY_SECTION_ASM_OP)
#undef HAS_INIT_SECTION
#define HAS_INIT_SECTION
#endif
For systems which support a .init section we use the .init section
to run __do_global_ctors, so we need not do anything here. */
+extern void SYMBOL__MAIN (void);
void
-SYMBOL__MAIN ()
+SYMBOL__MAIN (void)
{
/* Support recursive calls to `main': run initializers just once. */
static int initialized;
#endif
#endif /* no INIT_SECTION_ASM_OP and not CTOR_LISTS_DEFINED_EXTERNALLY */
#endif /* L_ctors */
-\f
-#ifdef L_exit
-
-#include "gbl-ctors.h"
-
-#ifdef NEED_ATEXIT
-
-#ifndef ON_EXIT
-
-# include <errno.h>
-
-static func_ptr *atexit_chain = 0;
-static long atexit_chain_length = 0;
-static volatile long last_atexit_chain_slot = -1;
-
-int
-atexit (func_ptr func)
-{
- if (++last_atexit_chain_slot == atexit_chain_length)
- {
- atexit_chain_length += 32;
- if (atexit_chain)
- atexit_chain = (func_ptr *) realloc (atexit_chain, atexit_chain_length
- * sizeof (func_ptr));
- else
- atexit_chain = (func_ptr *) malloc (atexit_chain_length
- * sizeof (func_ptr));
- if (! atexit_chain)
- {
- atexit_chain_length = 0;
- last_atexit_chain_slot = -1;
- errno = ENOMEM;
- return (-1);
- }
- }
- atexit_chain[last_atexit_chain_slot] = func;
- return (0);
-}
-
-extern void _cleanup (void);
-extern void _exit (int) __attribute__ ((__noreturn__));
-
-void
-exit (int status)
-{
- if (atexit_chain)
- {
- for ( ; last_atexit_chain_slot-- >= 0; )
- {
- (*atexit_chain[last_atexit_chain_slot + 1]) ();
- atexit_chain[last_atexit_chain_slot + 1] = 0;
- }
- free (atexit_chain);
- atexit_chain = 0;
- }
-#ifdef EXIT_BODY
- EXIT_BODY;
-#else
- _cleanup ();
-#endif
- _exit (status);
-}
-
-#else /* ON_EXIT */
-
-/* Simple; we just need a wrapper for ON_EXIT. */
-int
-atexit (func_ptr func)
-{
- return ON_EXIT (func);
-}
-
-#endif /* ON_EXIT */
-#endif /* NEED_ATEXIT */
-
-#endif /* L_exit */
+#endif /* LIBGCC2_UNITS_PER_WORD <= MIN_UNITS_PER_WORD */
OSDN Git Service
