#include "tconfig.h"
#include "tsystem.h"
+#include "symcat.h"
#include "machmode.h"
/* Don't use `fancy_abort' here even if config.h says to use it. */
Wtype
__negvsi2 (Wtype a)
{
- Wtype w;
+ Wtype w;
- w = -a;
+ w = -a;
if (a >= 0 ? w > 0 : w < 0)
abort ();
DWtype
__negvdi2 (DWtype a)
{
- DWtype w;
+ DWtype w;
- w = -a;
+ w = -a;
if (a >= 0 ? w > 0 : w < 0)
abort ();
- return w;
+ return w;
}
#endif
\f
Wtype
__absvsi2 (Wtype a)
{
- Wtype w = a;
+ Wtype w = a;
- if (a < 0)
+ if (a < 0)
#ifdef L_negvsi2
- w = __negvsi2 (a);
+ w = __negvsi2 (a);
#else
- w = -a;
+ w = -a;
- if (w < 0)
- abort ();
+ if (w < 0)
+ abort ();
#endif
return w;
DWtype
__absvdi2 (DWtype a)
{
- DWtype w = a;
+ DWtype w = a;
- if (a < 0)
+ if (a < 0)
#ifdef L_negvsi2
- w = __negvsi2 (a);
+ w = __negvsi2 (a);
#else
- w = -a;
+ w = -a;
- if (w < 0)
- abort ();
+ if (w < 0)
+ abort ();
#endif
- return w;
+ return w;
}
#endif
\f
DWtype
__mulvdi3 (DWtype u, DWtype v)
{
- DWtype w;
+ DWtype w;
w = u * v;
#define WORD_SIZE (sizeof (Wtype) * BITS_PER_UNIT)
#define HIGH_HALFWORD_COEFF (((UDWtype) 1) << (WORD_SIZE / 2))
#define HIGH_WORD_COEFF (((UDWtype) 1) << WORD_SIZE)
-#define DI_SIZE (sizeof (DWtype) * BITS_PER_UNIT)
-
-/* Define codes for all the float formats that we know of. Note
- that this is copied from real.h. */
-#define UNKNOWN_FLOAT_FORMAT 0
-#define IEEE_FLOAT_FORMAT 1
-#define VAX_FLOAT_FORMAT 2
-#define IBM_FLOAT_FORMAT 3
-
-/* Default to IEEE float if not specified. Nearly all machines use it. */
-#ifndef HOST_FLOAT_FORMAT
-#define HOST_FLOAT_FORMAT IEEE_FLOAT_FORMAT
-#endif
-
-#if HOST_FLOAT_FORMAT == IEEE_FLOAT_FORMAT
-#define DF_SIZE 53
-#define SF_SIZE 24
-#endif
-
-#if HOST_FLOAT_FORMAT == IBM_FLOAT_FORMAT
-#define DF_SIZE 56
-#define SF_SIZE 24
-#endif
-
-#if HOST_FLOAT_FORMAT == VAX_FLOAT_FORMAT
-#define DF_SIZE 56
-#define SF_SIZE 24
-#endif
+#define DI_SIZE (sizeof (DWtype) * BITS_PER_UNIT)
+#define DF_SIZE DBL_MANT_DIG
+#define SF_SIZE FLT_MANT_DIG
SFtype
__floatdisf (DWtype u)
#ifdef L_bb
-#if LONG_TYPE_SIZE == GCOV_TYPE_SIZE
-typedef long gcov_type;
-#else
-typedef long long gcov_type;
-#endif
-
+struct bb_function_info {
+ long checksum;
+ int arc_count;
+ const char *name;
+};
/* Structure emitted by -a */
struct bb
gcov_type *counts;
long ncounts;
struct bb *next;
- const unsigned long *addresses;
/* Older GCC's did not emit these fields. */
- long nwords;
- const char **functions;
- const long *line_nums;
- const char **filenames;
- char *flags;
+ long sizeof_bb;
+ struct bb_function_info *function_infos;
};
-#ifdef BLOCK_PROFILER_CODE
-BLOCK_PROFILER_CODE
-#else
#ifndef inhibit_libc
/* Simple minded basic block profiling output dumper for
#undef NULL /* Avoid errors if stdio.h and our stddef.h mismatch. */
#include <stdio.h>
-char *ctime PARAMS ((const time_t *));
#include "gbl-ctors.h"
#include "gcov-io.h"
#include <errno.h>
#endif
-static struct bb *bb_head;
-
-static int num_digits (long long value, int base) __attribute__ ((const));
-
-/* Return the number of digits needed to print a value */
-/* __inline__ */ static int num_digits (long long value, int base)
-{
- int minus = (value < 0 && base != 16);
- unsigned long long v = (minus) ? -value : value;
- int ret = minus;
+#include <gthr.h>
- do
- {
- v /= base;
- ret++;
- }
- while (v);
+static struct bb *bb_head;
- return ret;
-}
+int __global_counters = 0, __gthreads_active = 0;
void
__bb_exit_func (void)
{
- FILE *da_file, *file;
- long time_value;
- int i;
+ FILE *da_file;
+ struct bb *ptr;
+ long n_counters_p = 0;
+ gcov_type max_counter_p = 0;
+ gcov_type sum_counters_p = 0;
if (bb_head == 0)
return;
- i = strlen (bb_head->filename) - 3;
+ /* Calculate overall "statistics". */
- if (!strcmp (bb_head->filename+i, ".da"))
+ for (ptr = bb_head; ptr != (struct bb *) 0; ptr = ptr->next)
{
- /* Must be -fprofile-arcs not -a.
- Dump data in a form that gcov expects. */
+ int i;
- struct bb *ptr;
+ n_counters_p += ptr->ncounts;
- for (ptr = bb_head; ptr != (struct bb *) 0; ptr = ptr->next)
+ for (i = 0; i < ptr->ncounts; i++)
{
- int firstchar;
-
- /* Make sure the output file exists -
- but don't clobber exiting data. */
- if ((da_file = fopen (ptr->filename, "a")) != 0)
- fclose (da_file);
-
- /* Need to re-open in order to be able to write from the start. */
- da_file = fopen (ptr->filename, "r+b");
- /* Some old systems might not allow the 'b' mode modifier.
- Therefore, try to open without it. This can lead to a race
- condition so that when you delete and re-create the file, the
- file might be opened in text mode, but then, you shouldn't
- delete the file in the first place. */
- if (da_file == 0)
- da_file = fopen (ptr->filename, "r+");
- if (da_file == 0)
- {
- fprintf (stderr, "arc profiling: Can't open output file %s.\n",
- ptr->filename);
- continue;
- }
+ sum_counters_p += ptr->counts[i];
+
+ if (ptr->counts[i] > max_counter_p)
+ max_counter_p = ptr->counts[i];
+ }
+ }
+
+ for (ptr = bb_head; ptr != (struct bb *) 0; ptr = ptr->next)
+ {
+ gcov_type max_counter_o = 0;
+ gcov_type sum_counters_o = 0;
+ int i;
+
+ /* Calculate the per-object statistics. */
- /* After a fork, another process might try to read and/or write
- the same file simultanously. So if we can, lock the file to
- avoid race conditions. */
+ for (i = 0; i < ptr->ncounts; i++)
+ {
+ sum_counters_o += ptr->counts[i];
+
+ if (ptr->counts[i] > max_counter_o)
+ max_counter_o = ptr->counts[i];
+ }
+
+ /* open the file for appending, creating it if necessary. */
+ da_file = fopen (ptr->filename, "ab");
+ /* Some old systems might not allow the 'b' mode modifier.
+ Therefore, try to open without it. This can lead to a race
+ condition so that when you delete and re-create the file, the
+ file might be opened in text mode, but then, you shouldn't
+ delete the file in the first place. */
+ if (da_file == 0)
+ da_file = fopen (ptr->filename, "a");
+ if (da_file == 0)
+ {
+ fprintf (stderr, "arc profiling: Can't open output file %s.\n",
+ ptr->filename);
+ continue;
+ }
+
+ /* After a fork, another process might try to read and/or write
+ the same file simultanously. So if we can, lock the file to
+ avoid race conditions. */
#if defined (TARGET_HAS_F_SETLKW)
- {
- struct flock s_flock;
+ {
+ struct flock s_flock;
- s_flock.l_type = F_WRLCK;
- s_flock.l_whence = SEEK_SET;
- s_flock.l_start = 0;
- s_flock.l_len = 1;
- s_flock.l_pid = getpid ();
+ s_flock.l_type = F_WRLCK;
+ s_flock.l_whence = SEEK_SET;
+ s_flock.l_start = 0;
+ s_flock.l_len = 1;
+ s_flock.l_pid = getpid ();
- while (fcntl (fileno (da_file), F_SETLKW, &s_flock)
- && errno == EINTR);
- }
+ while (fcntl (fileno (da_file), F_SETLKW, &s_flock)
+ && errno == EINTR);
+ }
#endif
- /* If the file is not empty, and the number of counts in it is the
- same, then merge them in. */
- firstchar = fgetc (da_file);
- if (firstchar == EOF)
+ if (__write_long (-123, da_file, 4) != 0) /* magic */
+ {
+ fprintf (stderr, "arc profiling: Error writing output file %s.\n",
+ ptr->filename);
+ }
+ else
+ {
+
+ struct bb_function_info *fn_info;
+ gcov_type *count_ptr = ptr->counts;
+ int i;
+ int count_functions = 0;
+
+ for (fn_info = ptr->function_infos; fn_info->arc_count != -1;
+ fn_info++)
+ count_functions++;
+
+ /* number of functions in this block. */
+ __write_long (count_functions, da_file, 4);
+
+ /* length of extra data in bytes. */
+ __write_long ((4 + 8 + 8) + (4 + 8 + 8), da_file, 4);
+
+ /* overall statistics. */
+ /* number of counters. */
+ __write_long (n_counters_p, da_file, 4);
+ /* sum of counters. */
+ __write_gcov_type (sum_counters_p, da_file, 8);
+ /* maximal counter. */
+ __write_gcov_type (max_counter_p, da_file, 8);
+
+ /* per-object statistics. */
+ /* number of counters. */
+ __write_long (ptr->ncounts, da_file, 4);
+ /* sum of counters. */
+ __write_gcov_type (sum_counters_o, da_file, 8);
+ /* maximal counter. */
+ __write_gcov_type (max_counter_o, da_file, 8);
+
+ /* write execution counts for each function. */
+
+ for (fn_info = ptr->function_infos; fn_info->arc_count != -1;
+ fn_info++)
{
- if (ferror (da_file))
+ /* new function. */
+ if (__write_gcov_string
+ (fn_info->name, strlen (fn_info->name), da_file, -1) != 0)
{
- fprintf (stderr, "arc profiling: Can't read output file ");
- perror (ptr->filename);
+ fprintf (stderr,
+ "arc profiling: Error writing output file %s.\n",
+ ptr->filename);
+ break;
}
- }
- else
- {
- long n_counts = 0;
- if (ungetc (firstchar, da_file) == EOF)
- rewind (da_file);
- if (__read_long (&n_counts, da_file, 8) != 0)
+ if (__write_long (fn_info->checksum, da_file, 4) != 0)
{
- fprintf (stderr, "arc profiling: Can't read output file %s.\n",
+ fprintf (stderr,
+ "arc profiling: Error writing output file %s.\n",
ptr->filename);
- continue;
+ break;
}
- if (n_counts == ptr->ncounts)
+ if (__write_long (fn_info->arc_count, da_file, 4) != 0)
{
- int i;
-
- for (i = 0; i < n_counts; i++)
- {
- gcov_type v = 0;
-
- if (__read_gcov_type (&v, da_file, 8) != 0)
- {
- fprintf (stderr, "arc profiling: Can't read output file %s.\n",
- ptr->filename);
- break;
- }
- ptr->counts[i] += v;
- }
+ fprintf (stderr,
+ "arc profiling: Error writing output file %s.\n",
+ ptr->filename);
+ break;
}
- }
-
- rewind (da_file);
-
- /* ??? Should first write a header to the file. Preferably, a 4 byte
- magic number, 4 bytes containing the time the program was
- compiled, 4 bytes containing the last modification time of the
- source file, and 4 bytes indicating the compiler options used.
-
- That way we can easily verify that the proper source/executable/
- data file combination is being used from gcov. */
-
- if (__write_gcov_type (ptr->ncounts, da_file, 8) != 0)
- {
-
- fprintf (stderr, "arc profiling: Error writing output file %s.\n",
- ptr->filename);
- }
- else
- {
- int j;
- gcov_type *count_ptr = ptr->counts;
- int ret = 0;
- for (j = ptr->ncounts; j > 0; j--)
+ for (i = fn_info->arc_count; i > 0; i--, count_ptr++)
{
if (__write_gcov_type (*count_ptr, da_file, 8) != 0)
- {
- ret=1;
- break;
- }
- count_ptr++;
+ break;
}
- if (ret)
- fprintf (stderr, "arc profiling: Error writing output file %s.\n",
- ptr->filename);
- }
-
- if (fclose (da_file) == EOF)
- fprintf (stderr, "arc profiling: Error closing output file %s.\n",
- ptr->filename);
- }
-
- return;
- }
-
- /* Must be basic block profiling. Emit a human readable output file. */
-
- file = fopen ("bb.out", "a");
- if (!file)
- perror ("bb.out");
-
- else
- {
- struct bb *ptr;
-
- /* This is somewhat type incorrect, but it avoids worrying about
- exactly where time.h is included from. It should be ok unless
- a void * differs from other pointer formats, or if sizeof (long)
- is < sizeof (time_t). It would be nice if we could assume the
- use of rationale standards here. */
-
- time ((void *) &time_value);
- fprintf (file, "Basic block profiling finished on %s\n", ctime ((void *) &time_value));
-
- /* We check the length field explicitly in order to allow compatibility
- with older GCC's which did not provide it. */
-
- for (ptr = bb_head; ptr != (struct bb *) 0; ptr = ptr->next)
- {
- int i;
- int func_p = (ptr->nwords >= (long) sizeof (struct bb)
- && ptr->nwords <= 1000
- && ptr->functions);
- int line_p = (func_p && ptr->line_nums);
- int file_p = (func_p && ptr->filenames);
- int addr_p = (ptr->addresses != 0);
- long ncounts = ptr->ncounts;
- gcov_type cnt_max = 0;
- long line_max = 0;
- long addr_max = 0;
- int file_len = 0;
- int func_len = 0;
- int blk_len = num_digits (ncounts, 10);
- int cnt_len;
- int line_len;
- int addr_len;
-
- fprintf (file, "File %s, %ld basic blocks \n\n",
- ptr->filename, ncounts);
-
- /* Get max values for each field. */
- for (i = 0; i < ncounts; i++)
- {
- const char *p;
- int len;
-
- if (cnt_max < ptr->counts[i])
- cnt_max = ptr->counts[i];
-
- if (addr_p && (unsigned long) addr_max < ptr->addresses[i])
- addr_max = ptr->addresses[i];
-
- if (line_p && line_max < ptr->line_nums[i])
- line_max = ptr->line_nums[i];
-
- if (func_p)
+ if (i) /* there was an error */
{
- p = (ptr->functions[i]) ? (ptr->functions[i]) : "<none>";
- len = strlen (p);
- if (func_len < len)
- func_len = len;
- }
-
- if (file_p)
- {
- p = (ptr->filenames[i]) ? (ptr->filenames[i]) : "<none>";
- len = strlen (p);
- if (file_len < len)
- file_len = len;
+ fprintf (stderr,
+ "arc profiling: Error writing output file %s.\n",
+ ptr->filename);
+ break;
}
}
-
- addr_len = num_digits (addr_max, 16);
- cnt_len = num_digits (cnt_max, 10);
- line_len = num_digits (line_max, 10);
-
- /* Now print out the basic block information. */
- for (i = 0; i < ncounts; i++)
- {
-#if LONG_TYPE_SIZE == GCOV_TYPE_SIZE
- fprintf (file,
- " Block #%*d: executed %*ld time(s)",
- blk_len, i+1,
- cnt_len, ptr->counts[i]);
-#else
- fprintf (file,
- " Block #%*d: executed %*lld time(s)",
- blk_len, i+1,
- cnt_len, ptr->counts[i]);
-#endif
-
- if (addr_p)
- fprintf (file, " address= 0x%.*lx", addr_len,
- ptr->addresses[i]);
-
- if (func_p)
- fprintf (file, " function= %-*s", func_len,
- (ptr->functions[i]) ? ptr->functions[i] : "<none>");
-
- if (line_p)
- fprintf (file, " line= %*ld", line_len, ptr->line_nums[i]);
-
- if (file_p)
- fprintf (file, " file= %s",
- (ptr->filenames[i]) ? ptr->filenames[i] : "<none>");
-
- fprintf (file, "\n");
- }
-
- fprintf (file, "\n");
- fflush (file);
}
- fprintf (file, "\n\n");
- fclose (file);
+ if (fclose (da_file) != 0)
+ fprintf (stderr, "arc profiling: Error closing output file %s.\n",
+ ptr->filename);
}
}
if (blocks->zero_word)
return;
- /* Initialize destructor. */
+ /* Initialize destructor and per-thread data. */
if (!bb_head)
atexit (__bb_exit_func);
}
}
-#ifndef MACHINE_STATE_SAVE
-#define MACHINE_STATE_SAVE(ID)
-#endif
-#ifndef MACHINE_STATE_RESTORE
-#define MACHINE_STATE_RESTORE(ID)
-#endif
-
-/* Number of buckets in hashtable of basic block addresses. */
-
-#define BB_BUCKETS 311
-
-/* Maximum length of string in file bb.in. */
-
-#define BBINBUFSIZE 500
-
-struct bb_edge
-{
- struct bb_edge *next;
- unsigned long src_addr;
- unsigned long dst_addr;
- unsigned long count;
-};
-
-enum bb_func_mode
-{
- TRACE_KEEP = 0, TRACE_ON = 1, TRACE_OFF = 2
-};
-
-struct bb_func
-{
- struct bb_func *next;
- char *funcname;
- char *filename;
- enum bb_func_mode mode;
-};
-
-/* This is the connection to the outside world.
- The BLOCK_PROFILER macro must set __bb.blocks
- and __bb.blockno. */
-
-struct {
- unsigned long blockno;
- struct bb *blocks;
-} __bb;
-
-/* Vars to store addrs of source and destination basic blocks
- of a jump. */
-
-static unsigned long bb_src = 0;
-static unsigned long bb_dst = 0;
-
-static FILE *bb_tracefile = (FILE *) 0;
-static struct bb_edge **bb_hashbuckets = (struct bb_edge **) 0;
-static struct bb_func *bb_func_head = (struct bb_func *) 0;
-static unsigned long bb_callcount = 0;
-static int bb_mode = 0;
-
-static unsigned long *bb_stack = (unsigned long *) 0;
-static size_t bb_stacksize = 0;
-
-static int reported = 0;
-
-/* Trace modes:
-Always : Print execution frequencies of basic blocks
- to file bb.out.
-bb_mode & 1 != 0 : Dump trace of basic blocks to file bbtrace[.gz]
-bb_mode & 2 != 0 : Print jump frequencies to file bb.out.
-bb_mode & 4 != 0 : Cut call instructions from basic block flow.
-bb_mode & 8 != 0 : Insert return instructions in basic block flow.
-*/
-
-#ifdef HAVE_POPEN
-
-/*#include <sys/types.h>*/
-#include <sys/stat.h>
-/*#include <malloc.h>*/
-
-/* Commands executed by gopen. */
-
-#define GOPENDECOMPRESS "gzip -cd "
-#define GOPENCOMPRESS "gzip -c >"
-
-/* Like fopen but pipes through gzip. mode may only be "r" or "w".
- If it does not compile, simply replace gopen by fopen and delete
- '.gz' from any first parameter to gopen. */
-
-static FILE *
-gopen (char *fn, char *mode)
-{
- int use_gzip;
- char *p;
-
- if (mode[1])
- return (FILE *) 0;
-
- if (mode[0] != 'r' && mode[0] != 'w')
- return (FILE *) 0;
-
- p = fn + strlen (fn)-1;
- use_gzip = ((p[-1] == '.' && (p[0] == 'Z' || p[0] == 'z'))
- || (p[-2] == '.' && p[-1] == 'g' && p[0] == 'z'));
-
- if (use_gzip)
- {
- if (mode[0]=='r')
- {
- FILE *f;
- char *s = (char *) malloc (sizeof (char) * strlen (fn)
- + sizeof (GOPENDECOMPRESS));
- strcpy (s, GOPENDECOMPRESS);
- strcpy (s + (sizeof (GOPENDECOMPRESS)-1), fn);
- f = popen (s, mode);
- free (s);
- return f;
- }
-
- else
- {
- FILE *f;
- char *s = (char *) malloc (sizeof (char) * strlen (fn)
- + sizeof (GOPENCOMPRESS));
- strcpy (s, GOPENCOMPRESS);
- strcpy (s + (sizeof (GOPENCOMPRESS)-1), fn);
- if (!(f = popen (s, mode)))
- f = fopen (s, mode);
- free (s);
- return f;
- }
- }
-
- else
- return fopen (fn, mode);
-}
-
-static int
-gclose (FILE *f)
-{
- struct stat buf;
-
- if (f != 0)
- {
- if (!fstat (fileno (f), &buf) && S_ISFIFO (buf.st_mode))
- return pclose (f);
-
- return fclose (f);
- }
- return 0;
-}
-
-#endif /* HAVE_POPEN */
-
-/* Called once per program. */
-
-static void
-__bb_exit_trace_func (void)
-{
- FILE *file = fopen ("bb.out", "a");
- struct bb_func *f;
- struct bb *b;
-
- if (!file)
- perror ("bb.out");
-
- if (bb_mode & 1)
- {
- if (!bb_tracefile)
- perror ("bbtrace");
- else
-#ifdef HAVE_POPEN
- gclose (bb_tracefile);
-#else
- fclose (bb_tracefile);
-#endif /* HAVE_POPEN */
- }
-
- /* Check functions in `bb.in'. */
-
- if (file)
- {
- long time_value;
- const struct bb_func *p;
- int printed_something = 0;
- struct bb *ptr;
- long blk;
-
- /* This is somewhat type incorrect. */
- time ((void *) &time_value);
-
- for (p = bb_func_head; p != (struct bb_func *) 0; p = p->next)
- {
- for (ptr = bb_head; ptr != (struct bb *) 0; ptr = ptr->next)
- {
- if (!ptr->filename || (p->filename != (char *) 0 && strcmp (p->filename, ptr->filename)))
- continue;
- for (blk = 0; blk < ptr->ncounts; blk++)
- {
- if (!strcmp (p->funcname, ptr->functions[blk]))
- goto found;
- }
- }
-
- if (!printed_something)
- {
- fprintf (file, "Functions in `bb.in' not executed during basic block profiling on %s\n", ctime ((void *) &time_value));
- printed_something = 1;
- }
-
- fprintf (file, "\tFunction %s", p->funcname);
- if (p->filename)
- fprintf (file, " of file %s", p->filename);
- fprintf (file, "\n" );
-
-found: ;
- }
-
- if (printed_something)
- fprintf (file, "\n");
-
- }
-
- if (bb_mode & 2)
- {
- if (!bb_hashbuckets)
- {
- if (!reported)
- {
- fprintf (stderr, "Profiler: out of memory\n");
- reported = 1;
- }
- return;
- }
-
- else if (file)
- {
- long time_value;
- int i;
- unsigned long addr_max = 0;
- unsigned long cnt_max = 0;
- int cnt_len;
- int addr_len;
-
- /* This is somewhat type incorrect, but it avoids worrying about
- exactly where time.h is included from. It should be ok unless
- a void * differs from other pointer formats, or if sizeof (long)
- is < sizeof (time_t). It would be nice if we could assume the
- use of rationale standards here. */
-
- time ((void *) &time_value);
- fprintf (file, "Basic block jump tracing");
-
- switch (bb_mode & 12)
- {
- case 0:
- fprintf (file, " (with call)");
- break;
-
- case 4:
- /* Print nothing. */
- break;
-
- case 8:
- fprintf (file, " (with call & ret)");
- break;
-
- case 12:
- fprintf (file, " (with ret)");
- break;
- }
-
- fprintf (file, " finished on %s\n", ctime ((void *) &time_value));
-
- for (i = 0; i < BB_BUCKETS; i++)
- {
- struct bb_edge *bucket = bb_hashbuckets[i];
- for ( ; bucket; bucket = bucket->next )
- {
- if (addr_max < bucket->src_addr)
- addr_max = bucket->src_addr;
- if (addr_max < bucket->dst_addr)
- addr_max = bucket->dst_addr;
- if (cnt_max < bucket->count)
- cnt_max = bucket->count;
- }
- }
- addr_len = num_digits (addr_max, 16);
- cnt_len = num_digits (cnt_max, 10);
-
- for ( i = 0; i < BB_BUCKETS; i++)
- {
- struct bb_edge *bucket = bb_hashbuckets[i];
- for ( ; bucket; bucket = bucket->next )
- {
- fprintf (file,
- "Jump from block 0x%.*lx to block 0x%.*lx executed %*lu time(s)\n",
- addr_len, bucket->src_addr,
- addr_len, bucket->dst_addr,
- cnt_len, bucket->count);
- }
- }
-
- fprintf (file, "\n");
-
- }
- }
-
- if (file)
- fclose (file);
-
- /* Free allocated memory. */
-
- f = bb_func_head;
- while (f)
- {
- struct bb_func *old = f;
-
- f = f->next;
- if (old->funcname) free (old->funcname);
- if (old->filename) free (old->filename);
- free (old);
- }
-
- if (bb_stack)
- free (bb_stack);
-
- if (bb_hashbuckets)
- {
- int i;
-
- for (i = 0; i < BB_BUCKETS; i++)
- {
- struct bb_edge *old, *bucket = bb_hashbuckets[i];
-
- while (bucket)
- {
- old = bucket;
- bucket = bucket->next;
- free (old);
- }
- }
- free (bb_hashbuckets);
- }
-
- for (b = bb_head; b; b = b->next)
- if (b->flags) free (b->flags);
-}
-
-/* Called once per program. */
-
-static void
-__bb_init_prg (void)
-{
- FILE *file;
- char buf[BBINBUFSIZE];
- const char *p;
- const char *pos;
- enum bb_func_mode m;
- int i;
-
- /* Initialize destructor. */
- atexit (__bb_exit_func);
-
- if (!(file = fopen ("bb.in", "r")))
- return;
-
- while(fgets (buf, BBINBUFSIZE, file) != 0)
- {
- i = strlen (buf);
- if (buf[i] == '\n')
- buf[i--] = '\0';
-
- p = buf;
- if (*p == '-')
- {
- m = TRACE_OFF;
- p++;
- }
- else
- {
- m = TRACE_ON;
- }
- if (!strcmp (p, "__bb_trace__"))
- bb_mode |= 1;
- else if (!strcmp (p, "__bb_jumps__"))
- bb_mode |= 2;
- else if (!strcmp (p, "__bb_hidecall__"))
- bb_mode |= 4;
- else if (!strcmp (p, "__bb_showret__"))
- bb_mode |= 8;
- else
- {
- struct bb_func *f = (struct bb_func *) malloc (sizeof (struct bb_func));
- if (f)
- {
- unsigned long l;
- f->next = bb_func_head;
- if ((pos = strchr (p, ':')))
- {
- if (!(f->funcname = (char *) malloc (strlen (pos+1)+1)))
- continue;
- strcpy (f->funcname, pos+1);
- l = pos-p;
- if ((f->filename = (char *) malloc (l+1)))
- {
- strncpy (f->filename, p, l);
- f->filename[l] = '\0';
- }
- else
- f->filename = (char *) 0;
- }
- else
- {
- if (!(f->funcname = (char *) malloc (strlen (p)+1)))
- continue;
- strcpy (f->funcname, p);
- f->filename = (char *) 0;
- }
- f->mode = m;
- bb_func_head = f;
- }
- }
- }
- fclose (file);
-
-#ifdef HAVE_POPEN
-
- if (bb_mode & 1)
- bb_tracefile = gopen ("bbtrace.gz", "w");
-
-#else
-
- if (bb_mode & 1)
- bb_tracefile = fopen ("bbtrace", "w");
-
-#endif /* HAVE_POPEN */
-
- if (bb_mode & 2)
- {
- bb_hashbuckets = (struct bb_edge **)
- malloc (BB_BUCKETS * sizeof (struct bb_edge *));
- if (bb_hashbuckets)
- /* Use a loop here rather than calling bzero to avoid having to
- conditionalize its existence. */
- for (i = 0; i < BB_BUCKETS; i++)
- bb_hashbuckets[i] = 0;
- }
-
- if (bb_mode & 12)
- {
- bb_stacksize = 10;
- bb_stack = (unsigned long *) malloc (bb_stacksize * sizeof (*bb_stack));
- }
-
- /* Initialize destructor. */
- atexit (__bb_exit_trace_func);
-}
-
-/* Called upon entering a basic block. */
-
-void
-__bb_trace_func (void)
-{
- struct bb_edge *bucket;
-
- MACHINE_STATE_SAVE("1")
-
- if (!bb_callcount || (__bb.blocks->flags && (__bb.blocks->flags[__bb.blockno] & TRACE_OFF)))
- goto skip;
-
- bb_dst = __bb.blocks->addresses[__bb.blockno];
- __bb.blocks->counts[__bb.blockno]++;
-
- if (bb_tracefile)
- {
- fwrite (&bb_dst, sizeof (unsigned long), 1, bb_tracefile);
- }
-
- if (bb_hashbuckets)
- {
- struct bb_edge **startbucket, **oldnext;
-
- oldnext = startbucket
- = & bb_hashbuckets[ (((int) bb_src*8) ^ (int) bb_dst) % BB_BUCKETS ];
- bucket = *startbucket;
-
- for (bucket = *startbucket; bucket;
- oldnext = &(bucket->next), bucket = *oldnext)
- {
- if (bucket->src_addr == bb_src
- && bucket->dst_addr == bb_dst)
- {
- bucket->count++;
- *oldnext = bucket->next;
- bucket->next = *startbucket;
- *startbucket = bucket;
- goto ret;
- }
- }
-
- bucket = (struct bb_edge *) malloc (sizeof (struct bb_edge));
-
- if (!bucket)
- {
- if (!reported)
- {
- fprintf (stderr, "Profiler: out of memory\n");
- reported = 1;
- }
- }
-
- else
- {
- bucket->src_addr = bb_src;
- bucket->dst_addr = bb_dst;
- bucket->next = *startbucket;
- *startbucket = bucket;
- bucket->count = 1;
- }
- }
-
-ret:
- bb_src = bb_dst;
-
-skip:
- ;
-
- MACHINE_STATE_RESTORE("1")
-
-}
-
-/* Called when returning from a function and `__bb_showret__' is set. */
-
-static void
-__bb_trace_func_ret (void)
-{
- struct bb_edge *bucket;
-
- if (!bb_callcount || (__bb.blocks->flags && (__bb.blocks->flags[__bb.blockno] & TRACE_OFF)))
- goto skip;
-
- if (bb_hashbuckets)
- {
- struct bb_edge **startbucket, **oldnext;
-
- oldnext = startbucket
- = & bb_hashbuckets[ (((int) bb_dst * 8) ^ (int) bb_src) % BB_BUCKETS ];
- bucket = *startbucket;
-
- for (bucket = *startbucket; bucket;
- oldnext = &(bucket->next), bucket = *oldnext)
- {
- if (bucket->src_addr == bb_dst
- && bucket->dst_addr == bb_src)
- {
- bucket->count++;
- *oldnext = bucket->next;
- bucket->next = *startbucket;
- *startbucket = bucket;
- goto ret;
- }
- }
-
- bucket = (struct bb_edge *) malloc (sizeof (struct bb_edge));
-
- if (!bucket)
- {
- if (!reported)
- {
- fprintf (stderr, "Profiler: out of memory\n");
- reported = 1;
- }
- }
-
- else
- {
- bucket->src_addr = bb_dst;
- bucket->dst_addr = bb_src;
- bucket->next = *startbucket;
- *startbucket = bucket;
- bucket->count = 1;
- }
- }
-
-ret:
- bb_dst = bb_src;
-
-skip:
- ;
-
-}
-
-/* Called upon entering the first function of a file. */
-
-static void
-__bb_init_file (struct bb *blocks)
-{
-
- const struct bb_func *p;
- long blk, ncounts = blocks->ncounts;
- const char **functions = blocks->functions;
-
- /* Set up linked list. */
- blocks->zero_word = 1;
- blocks->next = bb_head;
- bb_head = blocks;
-
- blocks->flags = 0;
- if (!bb_func_head
- || !(blocks->flags = (char *) malloc (sizeof (char) * blocks->ncounts)))
- return;
-
- for (blk = 0; blk < ncounts; blk++)
- blocks->flags[blk] = 0;
-
- for (blk = 0; blk < ncounts; blk++)
- {
- for (p = bb_func_head; p; p = p->next)
- {
- if (!strcmp (p->funcname, functions[blk])
- && (!p->filename || !strcmp (p->filename, blocks->filename)))
- {
- blocks->flags[blk] |= p->mode;
- }
- }
- }
-
-}
-
-/* Called when exiting from a function. */
-
-void
-__bb_trace_ret (void)
-{
-
- MACHINE_STATE_SAVE("2")
-
- if (bb_callcount)
- {
- if ((bb_mode & 12) && bb_stacksize > bb_callcount)
- {
- bb_src = bb_stack[bb_callcount];
- if (bb_mode & 8)
- __bb_trace_func_ret ();
- }
-
- bb_callcount -= 1;
- }
-
- MACHINE_STATE_RESTORE("2")
-
-}
-
-/* Called when entering a function. */
-
-void
-__bb_init_trace_func (struct bb *blocks, unsigned long blockno)
-{
- static int trace_init = 0;
-
- MACHINE_STATE_SAVE("3")
-
- if (!blocks->zero_word)
- {
- if (!trace_init)
- {
- trace_init = 1;
- __bb_init_prg ();
- }
- __bb_init_file (blocks);
- }
-
- if (bb_callcount)
- {
-
- bb_callcount += 1;
-
- if (bb_mode & 12)
- {
- if (bb_callcount >= bb_stacksize)
- {
- size_t newsize = bb_callcount + 100;
-
- bb_stack = (unsigned long *) realloc (bb_stack, newsize);
- if (! bb_stack)
- {
- if (!reported)
- {
- fprintf (stderr, "Profiler: out of memory\n");
- reported = 1;
- }
- bb_stacksize = 0;
- goto stack_overflow;
- }
- bb_stacksize = newsize;
- }
- bb_stack[bb_callcount] = bb_src;
-
- if (bb_mode & 4)
- bb_src = 0;
-
- }
-
-stack_overflow:;
-
- }
-
- else if (blocks->flags && (blocks->flags[blockno] & TRACE_ON))
- {
- bb_callcount = 1;
- bb_src = 0;
-
- if (bb_stack)
- bb_stack[bb_callcount] = bb_src;
- }
-
- MACHINE_STATE_RESTORE("3")
-}
-
#endif /* not inhibit_libc */
-#endif /* not BLOCK_PROFILER_CODE */
#endif /* L_bb */
\f
#ifdef L_clear_cache
Long term no port should use those extensions. But many still do. */
#if !defined(INIT_SECTION_ASM_OP) && !defined(CTOR_LISTS_DEFINED_EXTERNALLY)
-#if defined (ASM_OUTPUT_CONSTRUCTOR) || defined (USE_COLLECT2)
+#if defined (TARGET_ASM_CONSTRUCTOR) || defined (USE_COLLECT2)
func_ptr __CTOR_LIST__[2] = {0, 0};
func_ptr __DTOR_LIST__[2] = {0, 0};
#else
OSDN Git Service
