/* More subroutines needed by GCC output code on some machines. */
/* Compile this one with gcc. */
/* Copyright (C) 1989, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
- 2000, 2001 Free Software Foundation, Inc.
+ 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
This file is part of GCC.
Software Foundation, 59 Temple Place - Suite 330, Boston, MA
02111-1307, USA. */
+
+/* We include auto-host.h here to get HAVE_GAS_HIDDEN. This is
+ supposedly valid even though this is a "target" file. */
+#include "auto-host.h"
+
/* It is incorrect to include config.h here, because this file is being
compiled for the target, and hence definitions concerning only the host
do not apply. */
-
#include "tconfig.h"
#include "tsystem.h"
-
-#include "machmode.h"
+#include "coretypes.h"
+#include "tm.h"
/* Don't use `fancy_abort' here even if config.h says to use it. */
#ifdef abort
#undef abort
#endif
+#ifdef HAVE_GAS_HIDDEN
+#define ATTRIBUTE_HIDDEN __attribute__ ((__visibility__ ("hidden")))
+#else
+#define ATTRIBUTE_HIDDEN
+#endif
+
#include "libgcc2.h"
\f
-#if defined (L_negdi2) || defined (L_divdi3) || defined (L_moddi3)
-#if defined (L_divdi3) || defined (L_moddi3)
-static inline
+#ifdef DECLARE_LIBRARY_RENAMES
+ DECLARE_LIBRARY_RENAMES
#endif
+
+#if defined (L_negdi2)
DWtype
__negdi2 (DWtype u)
{
Wtype
__subvsi3 (Wtype a, Wtype b)
{
-#ifdef L_addvsi3
- return __addvsi3 (a, (-b));
-#else
DWtype w;
w = a - b;
abort ();
return w;
-#endif
}
#endif
\f
DWtype
__subvdi3 (DWtype a, DWtype b)
{
-#ifdef L_addvdi3
- return (a, (-b));
-#else
DWtype w;
w = a - b;
abort ();
return w;
-#endif
}
#endif
\f
#ifdef L_mulvsi3
+#define WORD_SIZE (sizeof (Wtype) * BITS_PER_UNIT)
Wtype
__mulvsi3 (Wtype a, Wtype b)
{
DWtype w;
- w = a * b;
+ w = (DWtype) a * (DWtype) b;
- if (((a >= 0) == (b >= 0)) ? w < 0 : w > 0)
+ if (((a >= 0) == (b >= 0))
+ ? (UDWtype) w > (UDWtype) (((DWtype) 1 << (WORD_SIZE - 1)) - 1)
+ : (UDWtype) w < (UDWtype) ((DWtype) -1 << (WORD_SIZE - 1)))
abort ();
return w;
Wtype
__negvsi2 (Wtype a)
{
- Wtype w;
+ Wtype w;
- w = -a;
+ w = -a;
if (a >= 0 ? w > 0 : w < 0)
abort ();
DWtype
__negvdi2 (DWtype a)
{
- DWtype w;
+ DWtype w;
- w = -a;
+ w = -a;
if (a >= 0 ? w > 0 : w < 0)
abort ();
- return w;
+ return w;
}
#endif
\f
Wtype
__absvsi2 (Wtype a)
{
- Wtype w = a;
+ Wtype w = a;
- if (a < 0)
+ if (a < 0)
#ifdef L_negvsi2
- w = __negvsi2 (a);
+ w = __negvsi2 (a);
#else
- w = -a;
+ w = -a;
- if (w < 0)
- abort ();
+ if (w < 0)
+ abort ();
#endif
return w;
DWtype
__absvdi2 (DWtype a)
{
- DWtype w = a;
+ DWtype w = a;
- if (a < 0)
-#ifdef L_negvsi2
- w = __negvsi2 (a);
+ if (a < 0)
+#ifdef L_negvdi2
+ w = __negvdi2 (a);
#else
- w = -a;
+ w = -a;
- if (w < 0)
- abort ();
+ if (w < 0)
+ abort ();
#endif
- return w;
+ return w;
}
#endif
\f
#ifdef L_mulvdi3
+#define WORD_SIZE (sizeof (Wtype) * BITS_PER_UNIT)
DWtype
__mulvdi3 (DWtype u, DWtype v)
{
- DWtype w;
+ /* The unchecked multiplication needs 3 Wtype x Wtype multiplications,
+ but the checked multiplication needs only two. */
+ DWunion uu, vv;
- w = u * v;
+ uu.ll = u;
+ vv.ll = v;
- if (((u >= 0) == (v >= 0)) ? w < 0 : w > 0)
- abort ();
+ if (__builtin_expect (uu.s.high == uu.s.low >> (WORD_SIZE - 1), 1))
+ {
+ /* u fits in a single Wtype. */
+ if (__builtin_expect (vv.s.high == vv.s.low >> (WORD_SIZE - 1), 1))
+ {
+ /* v fits in a single Wtype as well. */
+ /* A single multiplication. No overflow risk. */
+ return (DWtype) uu.s.low * (DWtype) vv.s.low;
+ }
+ else
+ {
+ /* Two multiplications. */
+ DWunion w0, w1;
+
+ w0.ll = (UDWtype) (UWtype) uu.s.low * (UDWtype) (UWtype) vv.s.low;
+ w1.ll = (UDWtype) (UWtype) uu.s.low * (UDWtype) (UWtype) vv.s.high;
+ if (vv.s.high < 0)
+ w1.s.high -= uu.s.low;
+ if (uu.s.low < 0)
+ w1.ll -= vv.ll;
+ w1.ll += (UWtype) w0.s.high;
+ if (__builtin_expect (w1.s.high == w1.s.low >> (WORD_SIZE - 1), 1))
+ {
+ w0.s.high = w1.s.low;
+ return w0.ll;
+ }
+ }
+ }
+ else
+ {
+ if (__builtin_expect (vv.s.high == vv.s.low >> (WORD_SIZE - 1), 1))
+ {
+ /* v fits into a single Wtype. */
+ /* Two multiplications. */
+ DWunion w0, w1;
+
+ w0.ll = (UDWtype) (UWtype) uu.s.low * (UDWtype) (UWtype) vv.s.low;
+ w1.ll = (UDWtype) (UWtype) uu.s.high * (UDWtype) (UWtype) vv.s.low;
+ if (uu.s.high < 0)
+ w1.s.high -= vv.s.low;
+ if (vv.s.low < 0)
+ w1.ll -= uu.ll;
+ w1.ll += (UWtype) w0.s.high;
+ if (__builtin_expect (w1.s.high == w1.s.low >> (WORD_SIZE - 1), 1))
+ {
+ w0.s.high = w1.s.low;
+ return w0.ll;
+ }
+ }
+ else
+ {
+ /* A few sign checks and a single multiplication. */
+ if (uu.s.high >= 0)
+ {
+ if (vv.s.high >= 0)
+ {
+ if (uu.s.high == 0 && vv.s.high == 0)
+ {
+ DWtype w;
- return w;
+ w = (UDWtype) (UWtype) uu.s.low
+ * (UDWtype) (UWtype) vv.s.low;
+ if (__builtin_expect (w >= 0, 1))
+ return w;
+ }
+ }
+ else
+ {
+ if (uu.s.high == 0 && vv.s.high == (Wtype) -1)
+ {
+ DWunion ww;
+
+ ww.ll = (UDWtype) (UWtype) uu.s.low
+ * (UDWtype) (UWtype) vv.s.low;
+ ww.s.high -= uu.s.low;
+ if (__builtin_expect (ww.s.high < 0, 1))
+ return ww.ll;
+ }
+ }
+ }
+ else
+ {
+ if (vv.s.high >= 0)
+ {
+ if (uu.s.high == (Wtype) -1 && vv.s.high == 0)
+ {
+ DWunion ww;
+
+ ww.ll = (UDWtype) (UWtype) uu.s.low
+ * (UDWtype) (UWtype) vv.s.low;
+ ww.s.high -= vv.s.low;
+ if (__builtin_expect (ww.s.high < 0, 1))
+ return ww.ll;
+ }
+ }
+ else
+ {
+ if (uu.s.high == (Wtype) -1 && vv.s.high == (Wtype) - 1)
+ {
+ DWunion ww;
+
+ ww.ll = (UDWtype) (UWtype) uu.s.low
+ * (UDWtype) (UWtype) vv.s.low;
+ ww.s.high -= uu.s.low;
+ ww.s.high -= vv.s.low;
+ if (__builtin_expect (ww.s.high >= 0, 1))
+ return ww.ll;
+ }
+ }
+ }
+ }
+ }
+
+ /* Overflow. */
+ abort ();
}
#endif
\f
-/* Unless shift functions are defined whith full ANSI prototypes,
+/* Unless shift functions are defined with full ANSI prototypes,
parameter b will be promoted to int if word_type is smaller than an int. */
#ifdef L_lshrdi3
DWtype
}
#endif
\f
+#ifdef L_ffssi2
+#undef int
+extern int __ffsSI2 (UWtype u);
+int
+__ffsSI2 (UWtype u)
+{
+ UWtype count;
+
+ if (u == 0)
+ return 0;
+
+ count_trailing_zeros (count, u);
+ return count + 1;
+}
+#endif
+\f
#ifdef L_ffsdi2
-DWtype
-__ffsdi2 (DWtype u)
+#undef int
+extern int __ffsDI2 (DWtype u);
+int
+__ffsDI2 (DWtype u)
{
DWunion uu;
UWtype word, count, add;
}
#endif
\f
+#if (defined (L_udivdi3) || defined (L_divdi3) || \
+ defined (L_umoddi3) || defined (L_moddi3))
+#if defined (sdiv_qrnnd)
+#define L_udiv_w_sdiv
+#endif
+#endif
+
#ifdef L_udiv_w_sdiv
#if defined (sdiv_qrnnd)
+#if (defined (L_udivdi3) || defined (L_divdi3) || \
+ defined (L_umoddi3) || defined (L_moddi3))
+static inline __attribute__ ((__always_inline__))
+#endif
UWtype
__udiv_w_sdiv (UWtype *rp, UWtype a1, UWtype a0, UWtype d)
{
8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,
};
#endif
+\f
+#ifdef L_clzsi2
+#undef int
+extern int __clzSI2 (UWtype x);
+int
+__clzSI2 (UWtype x)
+{
+ Wtype ret;
+
+ count_leading_zeros (ret, x);
+
+ return ret;
+}
+#endif
+\f
+#ifdef L_clzdi2
+#undef int
+extern int __clzDI2 (UDWtype x);
+int
+__clzDI2 (UDWtype x)
+{
+ DWunion uu;
+ UWtype word;
+ Wtype ret, add;
+
+ uu.ll = x;
+ if (uu.s.high)
+ word = uu.s.high, add = 0;
+ else
+ word = uu.s.low, add = W_TYPE_SIZE;
+
+ count_leading_zeros (ret, word);
+ return ret + add;
+}
+#endif
+\f
+#ifdef L_ctzsi2
+#undef int
+extern int __ctzSI2 (UWtype x);
+int
+__ctzSI2 (UWtype x)
+{
+ Wtype ret;
+
+ count_trailing_zeros (ret, x);
+
+ return ret;
+}
+#endif
+\f
+#ifdef L_ctzdi2
+#undef int
+extern int __ctzDI2 (UDWtype x);
+int
+__ctzDI2 (UDWtype x)
+{
+ DWunion uu;
+ UWtype word;
+ Wtype ret, add;
+
+ uu.ll = x;
+ if (uu.s.low)
+ word = uu.s.low, add = 0;
+ else
+ word = uu.s.high, add = W_TYPE_SIZE;
+
+ count_trailing_zeros (ret, word);
+ return ret + add;
+}
+#endif
+
+#if (defined (L_popcountsi2) || defined (L_popcountdi2) \
+ || defined (L_popcount_tab))
+extern const UQItype __popcount_tab[] ATTRIBUTE_HIDDEN;
+#endif
+
+#ifdef L_popcount_tab
+const UQItype __popcount_tab[] =
+{
+ 0,1,1,2,1,2,2,3,1,2,2,3,2,3,3,4,1,2,2,3,2,3,3,4,2,3,3,4,3,4,4,5,
+ 1,2,2,3,2,3,3,4,2,3,3,4,3,4,4,5,2,3,3,4,3,4,4,5,3,4,4,5,4,5,5,6,
+ 1,2,2,3,2,3,3,4,2,3,3,4,3,4,4,5,2,3,3,4,3,4,4,5,3,4,4,5,4,5,5,6,
+ 2,3,3,4,3,4,4,5,3,4,4,5,4,5,5,6,3,4,4,5,4,5,5,6,4,5,5,6,5,6,6,7,
+ 1,2,2,3,2,3,3,4,2,3,3,4,3,4,4,5,2,3,3,4,3,4,4,5,3,4,4,5,4,5,5,6,
+ 2,3,3,4,3,4,4,5,3,4,4,5,4,5,5,6,3,4,4,5,4,5,5,6,4,5,5,6,5,6,6,7,
+ 2,3,3,4,3,4,4,5,3,4,4,5,4,5,5,6,3,4,4,5,4,5,5,6,4,5,5,6,5,6,6,7,
+ 3,4,4,5,4,5,5,6,4,5,5,6,5,6,6,7,4,5,5,6,5,6,6,7,5,6,6,7,6,7,7,8,
+};
+#endif
+\f
+#ifdef L_popcountsi2
+#undef int
+extern int __popcountSI2 (UWtype x);
+int
+__popcountSI2 (UWtype x)
+{
+ UWtype i, ret = 0;
+
+ for (i = 0; i < W_TYPE_SIZE; i += 8)
+ ret += __popcount_tab[(x >> i) & 0xff];
+
+ return ret;
+}
+#endif
+\f
+#ifdef L_popcountdi2
+#undef int
+extern int __popcountDI2 (UDWtype x);
+int
+__popcountDI2 (UDWtype x)
+{
+ UWtype i, ret = 0;
+
+ for (i = 0; i < 2*W_TYPE_SIZE; i += 8)
+ ret += __popcount_tab[(x >> i) & 0xff];
+
+ return ret;
+}
+#endif
+\f
+#ifdef L_paritysi2
+#undef int
+extern int __paritySI2 (UWtype x);
+int
+__paritySI2 (UWtype x)
+{
+#if W_TYPE_SIZE > 64
+# error "fill out the table"
+#endif
+#if W_TYPE_SIZE > 32
+ x ^= x >> 32;
+#endif
+#if W_TYPE_SIZE > 16
+ x ^= x >> 16;
+#endif
+ x ^= x >> 8;
+ x ^= x >> 4;
+ x &= 0xf;
+ return (0x6996 >> x) & 1;
+}
+#endif
+\f
+#ifdef L_paritydi2
+#undef int
+extern int __parityDI2 (UDWtype x);
+int
+__parityDI2 (UDWtype x)
+{
+ DWunion uu;
+ UWtype nx;
+
+ uu.ll = x;
+ nx = uu.s.low ^ uu.s.high;
+
+#if W_TYPE_SIZE > 64
+# error "fill out the table"
+#endif
+#if W_TYPE_SIZE > 32
+ nx ^= nx >> 32;
+#endif
+#if W_TYPE_SIZE > 16
+ nx ^= nx >> 16;
+#endif
+ nx ^= nx >> 8;
+ nx ^= nx >> 4;
+ nx &= 0xf;
+ return (0x6996 >> nx) & 1;
+}
+#endif
#ifdef L_udivmoddi4
#if (defined (L_udivdi3) || defined (L_divdi3) || \
defined (L_umoddi3) || defined (L_moddi3))
-static inline
+static inline __attribute__ ((__always_inline__))
#endif
UDWtype
__udivmoddi4 (UDWtype n, UDWtype d, UDWtype *rp)
if (uu.s.high < 0)
c = ~c,
- uu.ll = __negdi2 (uu.ll);
+ uu.ll = -uu.ll;
if (vv.s.high < 0)
c = ~c,
- vv.ll = __negdi2 (vv.ll);
+ vv.ll = -vv.ll;
w = __udivmoddi4 (uu.ll, vv.ll, (UDWtype *) 0);
if (c)
- w = __negdi2 (w);
+ w = -w;
return w;
}
if (uu.s.high < 0)
c = ~c,
- uu.ll = __negdi2 (uu.ll);
+ uu.ll = -uu.ll;
if (vv.s.high < 0)
- vv.ll = __negdi2 (vv.ll);
+ vv.ll = -vv.ll;
(void) __udivmoddi4 (uu.ll, vv.ll, &w);
if (c)
- w = __negdi2 (w);
+ w = -w;
return w;
}
DWtype
__fixunsdfDI (DFtype a)
{
- DFtype b;
- UDWtype v;
+ UWtype hi, lo;
- if (a < 0)
- return 0;
+ /* Get high part of result. The division here will just moves the radix
+ point and will not cause any rounding. Then the conversion to integral
+ type chops result as desired. */
+ hi = a / HIGH_WORD_COEFF;
- /* Compute high word of result, as a flonum. */
- b = (a / HIGH_WORD_COEFF);
- /* Convert that to fixed (but not to DWtype!),
- and shift it into the high word. */
- v = (UWtype) b;
- v <<= WORD_SIZE;
- /* Remove high part from the DFtype, leaving the low part as flonum. */
- a -= (DFtype)v;
- /* Convert that to fixed (but not to DWtype!) and add it in.
- Sometimes A comes out negative. This is significant, since
- A has more bits than a long int does. */
- if (a < 0)
- v -= (UWtype) (- a);
- else
- v += (UWtype) a;
- return v;
+ /* Get low part of result. Convert `hi' to floating type and scale it back,
+ then subtract this from the number being converted. This leaves the low
+ part. Convert that to integral type. */
+ lo = (a - ((DFtype) hi) * HIGH_WORD_COEFF);
+
+ /* Assemble result from the two parts. */
+ return ((UDWtype) hi << WORD_SIZE) | lo;
}
#endif
to lose any bits. Some day someone else can write a faster version
that avoids converting to DFtype, and verify it really works right. */
DFtype a = original_a;
- DFtype b;
- UDWtype v;
+ UWtype hi, lo;
- if (a < 0)
- return 0;
+ /* Get high part of result. The division here will just moves the radix
+ point and will not cause any rounding. Then the conversion to integral
+ type chops result as desired. */
+ hi = a / HIGH_WORD_COEFF;
- /* Compute high word of result, as a flonum. */
- b = (a / HIGH_WORD_COEFF);
- /* Convert that to fixed (but not to DWtype!),
- and shift it into the high word. */
- v = (UWtype) b;
- v <<= WORD_SIZE;
- /* Remove high part from the DFtype, leaving the low part as flonum. */
- a -= (DFtype) v;
- /* Convert that to fixed (but not to DWtype!) and add it in.
- Sometimes A comes out negative. This is significant, since
- A has more bits than a long int does. */
- if (a < 0)
- v -= (UWtype) (- a);
- else
- v += (UWtype) a;
- return v;
+ /* Get low part of result. Convert `hi' to floating type and scale it back,
+ then subtract this from the number being converted. This leaves the low
+ part. Convert that to integral type. */
+ lo = (a - ((DFtype) hi) * HIGH_WORD_COEFF);
+
+ /* Assemble result from the two parts. */
+ return ((UDWtype) hi << WORD_SIZE) | lo;
}
#endif
#define WORD_SIZE (sizeof (Wtype) * BITS_PER_UNIT)
#define HIGH_HALFWORD_COEFF (((UDWtype) 1) << (WORD_SIZE / 2))
#define HIGH_WORD_COEFF (((UDWtype) 1) << WORD_SIZE)
-#define DI_SIZE (sizeof (DWtype) * BITS_PER_UNIT)
-
-/* GCC guarantees this header exists at this point. */
-#include <float.h>
+#define DI_SIZE (sizeof (DWtype) * BITS_PER_UNIT)
#define DF_SIZE DBL_MANT_DIG
#define SF_SIZE FLT_MANT_DIG
&& u < ((DWtype) 1 << DF_SIZE)))
{
if ((UDWtype) u & (REP_BIT - 1))
- u |= REP_BIT;
+ {
+ u &= ~ (REP_BIT - 1);
+ u |= REP_BIT;
+ }
}
}
f = (Wtype) (u >> WORD_SIZE);
#endif
#endif
-#ifdef L_bb
-
-#if LONG_TYPE_SIZE == GCOV_TYPE_SIZE
-typedef long gcov_type;
-#else
-typedef long long gcov_type;
-#endif
-
-
-/* Structure emitted by -a */
-struct bb
-{
- long zero_word;
- const char *filename;
- gcov_type *counts;
- long ncounts;
- struct bb *next;
- const unsigned long *addresses;
-
- /* Older GCC's did not emit these fields. */
- long nwords;
- const char **functions;
- const long *line_nums;
- const char **filenames;
- char *flags;
-};
-
-#ifdef BLOCK_PROFILER_CODE
-BLOCK_PROFILER_CODE
-#else
-#ifndef inhibit_libc
-
-/* Simple minded basic block profiling output dumper for
- systems that don't provide tcov support. At present,
- it requires atexit and stdio. */
-
-#undef NULL /* Avoid errors if stdio.h and our stddef.h mismatch. */
-#include <stdio.h>
-
-#include "gbl-ctors.h"
-#include "gcov-io.h"
-#include <string.h>
-#ifdef TARGET_HAS_F_SETLKW
-#include <fcntl.h>
-#include <errno.h>
-#endif
-
-static struct bb *bb_head;
-
-void
-__bb_exit_func (void)
-{
- FILE *da_file;
- int i;
- struct bb *ptr;
-
- if (bb_head == 0)
- return;
-
- i = strlen (bb_head->filename) - 3;
-
-
- for (ptr = bb_head; ptr != (struct bb *) 0; ptr = ptr->next)
- {
- int firstchar;
-
- /* Make sure the output file exists -
- but don't clobber exiting data. */
- if ((da_file = fopen (ptr->filename, "a")) != 0)
- fclose (da_file);
-
- /* Need to re-open in order to be able to write from the start. */
- da_file = fopen (ptr->filename, "r+b");
- /* Some old systems might not allow the 'b' mode modifier.
- Therefore, try to open without it. This can lead to a race
- condition so that when you delete and re-create the file, the
- file might be opened in text mode, but then, you shouldn't
- delete the file in the first place. */
- if (da_file == 0)
- da_file = fopen (ptr->filename, "r+");
- if (da_file == 0)
- {
- fprintf (stderr, "arc profiling: Can't open output file %s.\n",
- ptr->filename);
- continue;
- }
-
- /* After a fork, another process might try to read and/or write
- the same file simultanously. So if we can, lock the file to
- avoid race conditions. */
-#if defined (TARGET_HAS_F_SETLKW)
- {
- struct flock s_flock;
-
- s_flock.l_type = F_WRLCK;
- s_flock.l_whence = SEEK_SET;
- s_flock.l_start = 0;
- s_flock.l_len = 1;
- s_flock.l_pid = getpid ();
-
- while (fcntl (fileno (da_file), F_SETLKW, &s_flock)
- && errno == EINTR);
- }
-#endif
-
- /* If the file is not empty, and the number of counts in it is the
- same, then merge them in. */
- firstchar = fgetc (da_file);
- if (firstchar == EOF)
- {
- if (ferror (da_file))
- {
- fprintf (stderr, "arc profiling: Can't read output file ");
- perror (ptr->filename);
- }
- }
- else
- {
- long n_counts = 0;
-
- if (ungetc (firstchar, da_file) == EOF)
- rewind (da_file);
- if (__read_long (&n_counts, da_file, 8) != 0)
- {
- fprintf (stderr, "arc profiling: Can't read output file %s.\n",
- ptr->filename);
- continue;
- }
-
- if (n_counts == ptr->ncounts)
- {
- int i;
-
- for (i = 0; i < n_counts; i++)
- {
- gcov_type v = 0;
-
- if (__read_gcov_type (&v, da_file, 8) != 0)
- {
- fprintf (stderr,
- "arc profiling: Can't read output file %s.\n",
- ptr->filename);
- break;
- }
- ptr->counts[i] += v;
- }
- }
-
- }
-
- rewind (da_file);
-
- /* ??? Should first write a header to the file. Preferably, a 4 byte
- magic number, 4 bytes containing the time the program was
- compiled, 4 bytes containing the last modification time of the
- source file, and 4 bytes indicating the compiler options used.
-
- That way we can easily verify that the proper source/executable/
- data file combination is being used from gcov. */
-
- if (__write_gcov_type (ptr->ncounts, da_file, 8) != 0)
- {
-
- fprintf (stderr, "arc profiling: Error writing output file %s.\n",
- ptr->filename);
- }
- else
- {
- int j;
- gcov_type *count_ptr = ptr->counts;
- int ret = 0;
- for (j = ptr->ncounts; j > 0; j--)
- {
- if (__write_gcov_type (*count_ptr, da_file, 8) != 0)
- {
- ret = 1;
- break;
- }
- count_ptr++;
- }
- if (ret)
- fprintf (stderr, "arc profiling: Error writing output file %s.\n",
- ptr->filename);
- }
-
- if (fclose (da_file) == EOF)
- fprintf (stderr, "arc profiling: Error closing output file %s.\n",
- ptr->filename);
- }
-
- return;
-}
-
-void
-__bb_init_func (struct bb *blocks)
-{
- /* User is supposed to check whether the first word is non-0,
- but just in case.... */
-
- if (blocks->zero_word)
- return;
-
- /* Initialize destructor. */
- if (!bb_head)
- atexit (__bb_exit_func);
-
- /* Set up linked list. */
- blocks->zero_word = 1;
- blocks->next = bb_head;
- bb_head = blocks;
-}
-
-/* Called before fork or exec - write out profile information gathered so
- far and reset it to zero. This avoids duplication or loss of the
- profile information gathered so far. */
-void
-__bb_fork_func (void)
-{
- struct bb *ptr;
-
- __bb_exit_func ();
- for (ptr = bb_head; ptr != (struct bb *) 0; ptr = ptr->next)
- {
- long i;
- for (i = ptr->ncounts - 1; i >= 0; i--)
- ptr->counts[i] = 0;
- }
-}
-
-#endif /* not inhibit_libc */
-#endif /* not BLOCK_PROFILER_CODE */
-#endif /* L_bb */
\f
#ifdef L_clear_cache
/* Clear part of an instruction cache. */
-#define INSN_CACHE_PLANE_SIZE (INSN_CACHE_SIZE / INSN_CACHE_DEPTH)
-
void
__clear_cache (char *beg __attribute__((__unused__)),
char *end __attribute__((__unused__)))
{
#ifdef CLEAR_INSN_CACHE
CLEAR_INSN_CACHE (beg, end);
-#else
-#ifdef INSN_CACHE_SIZE
- static char array[INSN_CACHE_SIZE + INSN_CACHE_PLANE_SIZE + INSN_CACHE_LINE_WIDTH];
- static int initialized;
- int offset;
- void *start_addr
- void *end_addr;
- typedef (*function_ptr) (void);
-
-#if (INSN_CACHE_SIZE / INSN_CACHE_LINE_WIDTH) < 16
- /* It's cheaper to clear the whole cache.
- Put in a series of jump instructions so that calling the beginning
- of the cache will clear the whole thing. */
-
- if (! initialized)
- {
- int ptr = (((int) array + INSN_CACHE_LINE_WIDTH - 1)
- & -INSN_CACHE_LINE_WIDTH);
- int end_ptr = ptr + INSN_CACHE_SIZE;
-
- while (ptr < end_ptr)
- {
- *(INSTRUCTION_TYPE *)ptr
- = JUMP_AHEAD_INSTRUCTION + INSN_CACHE_LINE_WIDTH;
- ptr += INSN_CACHE_LINE_WIDTH;
- }
- *(INSTRUCTION_TYPE *) (ptr - INSN_CACHE_LINE_WIDTH) = RETURN_INSTRUCTION;
-
- initialized = 1;
- }
-
- /* Call the beginning of the sequence. */
- (((function_ptr) (((int) array + INSN_CACHE_LINE_WIDTH - 1)
- & -INSN_CACHE_LINE_WIDTH))
- ());
-
-#else /* Cache is large. */
-
- if (! initialized)
- {
- int ptr = (((int) array + INSN_CACHE_LINE_WIDTH - 1)
- & -INSN_CACHE_LINE_WIDTH);
-
- while (ptr < (int) array + sizeof array)
- {
- *(INSTRUCTION_TYPE *)ptr = RETURN_INSTRUCTION;
- ptr += INSN_CACHE_LINE_WIDTH;
- }
-
- initialized = 1;
- }
-
- /* Find the location in array that occupies the same cache line as BEG. */
-
- offset = ((int) beg & -INSN_CACHE_LINE_WIDTH) & (INSN_CACHE_PLANE_SIZE - 1);
- start_addr = (((int) (array + INSN_CACHE_PLANE_SIZE - 1)
- & -INSN_CACHE_PLANE_SIZE)
- + offset);
-
- /* Compute the cache alignment of the place to stop clearing. */
-#if 0 /* This is not needed for gcc's purposes. */
- /* If the block to clear is bigger than a cache plane,
- we clear the entire cache, and OFFSET is already correct. */
- if (end < beg + INSN_CACHE_PLANE_SIZE)
-#endif
- offset = (((int) (end + INSN_CACHE_LINE_WIDTH - 1)
- & -INSN_CACHE_LINE_WIDTH)
- & (INSN_CACHE_PLANE_SIZE - 1));
-
-#if INSN_CACHE_DEPTH > 1
- end_addr = (start_addr & -INSN_CACHE_PLANE_SIZE) + offset;
- if (end_addr <= start_addr)
- end_addr += INSN_CACHE_PLANE_SIZE;
-
- for (plane = 0; plane < INSN_CACHE_DEPTH; plane++)
- {
- int addr = start_addr + plane * INSN_CACHE_PLANE_SIZE;
- int stop = end_addr + plane * INSN_CACHE_PLANE_SIZE;
-
- while (addr != stop)
- {
- /* Call the return instruction at ADDR. */
- ((function_ptr) addr) ();
-
- addr += INSN_CACHE_LINE_WIDTH;
- }
- }
-#else /* just one plane */
- do
- {
- /* Call the return instruction at START_ADDR. */
- ((function_ptr) start_addr) ();
-
- start_addr += INSN_CACHE_LINE_WIDTH;
- }
- while ((start_addr % INSN_CACHE_SIZE) != offset);
-#endif /* just one plane */
-#endif /* Cache is large */
-#endif /* Cache exists */
#endif /* CLEAR_INSN_CACHE */
}
#ifdef TRANSFER_FROM_TRAMPOLINE
TRANSFER_FROM_TRAMPOLINE
#endif
-
-#if defined (NeXT) && defined (__MACH__)
-
-/* Make stack executable so we can call trampolines on stack.
- This is called from INITIALIZE_TRAMPOLINE in next.h. */
-#ifdef NeXTStep21
- #include <mach.h>
-#else
- #include <mach/mach.h>
-#endif
-
-void
-__enable_execute_stack (char *addr)
-{
- kern_return_t r;
- char *eaddr = addr + TRAMPOLINE_SIZE;
- vm_address_t a = (vm_address_t) addr;
-
- /* turn on execute access on stack */
- r = vm_protect (task_self (), a, TRAMPOLINE_SIZE, FALSE, VM_PROT_ALL);
- if (r != KERN_SUCCESS)
- {
- mach_error("vm_protect VM_PROT_ALL", r);
- exit(1);
- }
-
- /* We inline the i-cache invalidation for speed */
-
-#ifdef CLEAR_INSN_CACHE
- CLEAR_INSN_CACHE (addr, eaddr);
-#else
- __clear_cache ((int) addr, (int) eaddr);
-#endif
-}
-
-#endif /* defined (NeXT) && defined (__MACH__) */
-
-#ifdef __convex__
-
-/* Make stack executable so we can call trampolines on stack.
- This is called from INITIALIZE_TRAMPOLINE in convex.h. */
-
-#include <sys/mman.h>
-#include <sys/vmparam.h>
-#include <machine/machparam.h>
-
-void
-__enable_execute_stack (void)
-{
- int fp;
- static unsigned lowest = USRSTACK;
- unsigned current = (unsigned) &fp & -NBPG;
-
- if (lowest > current)
- {
- unsigned len = lowest - current;
- mremap (current, &len, PROT_READ | PROT_WRITE | PROT_EXEC, MAP_PRIVATE);
- lowest = current;
- }
-
- /* Clear instruction cache in case an old trampoline is in it. */
- asm ("pich");
-}
-#endif /* __convex__ */
-
-#ifdef __sysV88__
-
-/* Modified from the convex -code above. */
-
-#include <sys/param.h>
-#include <errno.h>
-#include <sys/m88kbcs.h>
-
-void
-__enable_execute_stack (void)
-{
- int save_errno;
- static unsigned long lowest = USRSTACK;
- unsigned long current = (unsigned long) &save_errno & -NBPC;
-
- /* Ignore errno being set. memctl sets errno to EINVAL whenever the
- address is seen as 'negative'. That is the case with the stack. */
-
- save_errno=errno;
- if (lowest > current)
- {
- unsigned len=lowest-current;
- memctl(current,len,MCT_TEXT);
- lowest = current;
- }
- else
- memctl(current,NBPC,MCT_TEXT);
- errno=save_errno;
-}
-
-#endif /* __sysV88__ */
-
-#ifdef __sysV68__
-
-#include <sys/signal.h>
-#include <errno.h>
-
-/* Motorola forgot to put memctl.o in the libp version of libc881.a,
- so define it here, because we need it in __clear_insn_cache below */
-/* On older versions of this OS, no memctl or MCT_TEXT are defined;
- hence we enable this stuff only if MCT_TEXT is #define'd. */
-
-#ifdef MCT_TEXT
-asm("\n\
- global memctl\n\
-memctl:\n\
- movq &75,%d0\n\
- trap &0\n\
- bcc.b noerror\n\
- jmp cerror%\n\
-noerror:\n\
- movq &0,%d0\n\
- rts");
-#endif
-
-/* Clear instruction cache so we can call trampolines on stack.
- This is called from FINALIZE_TRAMPOLINE in mot3300.h. */
-
-void
-__clear_insn_cache (void)
-{
-#ifdef MCT_TEXT
- int save_errno;
-
- /* Preserve errno, because users would be surprised to have
- errno changing without explicitly calling any system-call. */
- save_errno = errno;
-
- /* Keep it simple : memctl (MCT_TEXT) always fully clears the insn cache.
- No need to use an address derived from _start or %sp, as 0 works also. */
- memctl(0, 4096, MCT_TEXT);
- errno = save_errno;
-#endif
-}
-
-#endif /* __sysV68__ */
-
-#ifdef __pyr__
-
-#undef NULL /* Avoid errors if stdio.h and our stddef.h mismatch. */
-#include <stdio.h>
-#include <sys/mman.h>
-#include <sys/types.h>
-#include <sys/param.h>
-#include <sys/vmmac.h>
-
-/* Modified from the convex -code above.
- mremap promises to clear the i-cache. */
-
-void
-__enable_execute_stack (void)
-{
- int fp;
- if (mprotect (((unsigned int)&fp/PAGSIZ)*PAGSIZ, PAGSIZ,
- PROT_READ|PROT_WRITE|PROT_EXEC))
- {
- perror ("mprotect in __enable_execute_stack");
- fflush (stderr);
- abort ();
- }
-}
-#endif /* __pyr__ */
-
-#if defined (sony_news) && defined (SYSTYPE_BSD)
-
-#include <stdio.h>
-#include <sys/types.h>
-#include <sys/param.h>
-#include <syscall.h>
-#include <machine/sysnews.h>
-
-/* cacheflush function for NEWS-OS 4.2.
- This function is called from trampoline-initialize code
- defined in config/mips/mips.h. */
-
-void
-cacheflush (char *beg, int size, int flag)
-{
- if (syscall (SYS_sysnews, NEWS_CACHEFLUSH, beg, size, FLUSH_BCACHE))
- {
- perror ("cache_flush");
- fflush (stderr);
- abort ();
- }
-}
-
-#endif /* sony_news */
#endif /* L_trampoline */
\f
#ifndef __CYGWIN__
For systems which support a .init section we use the .init section
to run __do_global_ctors, so we need not do anything here. */
+extern void SYMBOL__MAIN (void);
void
-SYMBOL__MAIN ()
+SYMBOL__MAIN (void)
{
/* Support recursive calls to `main': run initializers just once. */
static int initialized;
#endif
#endif /* no INIT_SECTION_ASM_OP and not CTOR_LISTS_DEFINED_EXTERNALLY */
#endif /* L_ctors */
-\f
-#ifdef L_exit
-
-#include "gbl-ctors.h"
-
-#ifdef NEED_ATEXIT
-
-#ifndef ON_EXIT
-
-# include <errno.h>
-
-static func_ptr *atexit_chain = 0;
-static long atexit_chain_length = 0;
-static volatile long last_atexit_chain_slot = -1;
-
-int
-atexit (func_ptr func)
-{
- if (++last_atexit_chain_slot == atexit_chain_length)
- {
- atexit_chain_length += 32;
- if (atexit_chain)
- atexit_chain = (func_ptr *) realloc (atexit_chain, atexit_chain_length
- * sizeof (func_ptr));
- else
- atexit_chain = (func_ptr *) malloc (atexit_chain_length
- * sizeof (func_ptr));
- if (! atexit_chain)
- {
- atexit_chain_length = 0;
- last_atexit_chain_slot = -1;
- errno = ENOMEM;
- return (-1);
- }
- }
- atexit_chain[last_atexit_chain_slot] = func;
- return (0);
-}
-
-extern void _cleanup (void);
-extern void _exit (int) __attribute__ ((__noreturn__));
-
-void
-exit (int status)
-{
- if (atexit_chain)
- {
- for ( ; last_atexit_chain_slot-- >= 0; )
- {
- (*atexit_chain[last_atexit_chain_slot + 1]) ();
- atexit_chain[last_atexit_chain_slot + 1] = 0;
- }
- free (atexit_chain);
- atexit_chain = 0;
- }
-#ifdef EXIT_BODY
- EXIT_BODY;
-#else
- _cleanup ();
-#endif
- _exit (status);
-}
-
-#else /* ON_EXIT */
-
-/* Simple; we just need a wrapper for ON_EXIT. */
-int
-atexit (func_ptr func)
-{
- return ON_EXIT (func);
-}
-
-#endif /* ON_EXIT */
-#endif /* NEED_ATEXIT */
-#endif /* L_exit */
OSDN Git Service
