/* Generic partial redundancy elimination with lazy code motion support.
- Copyright (C) 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
+ Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003, 2004
+ Free Software Foundation, Inc.
This file is part of GCC.
#include "config.h"
#include "system.h"
+#include "coretypes.h"
+#include "tm.h"
#include "rtl.h"
#include "regs.h"
#include "hard-reg-set.h"
#include "insn-config.h"
#include "recog.h"
#include "basic-block.h"
+#include "output.h"
#include "tm_p.h"
+#include "function.h"
/* We want target macros for the mode switching code to be able to refer
to instruction attribute values. */
#include "insn-attr.h"
/* Edge based LCM routines. */
-static void compute_antinout_edge PARAMS ((sbitmap *, sbitmap *,
- sbitmap *, sbitmap *));
-static void compute_earliest PARAMS ((struct edge_list *, int,
- sbitmap *, sbitmap *,
- sbitmap *, sbitmap *,
- sbitmap *));
-static void compute_laterin PARAMS ((struct edge_list *, sbitmap *,
- sbitmap *, sbitmap *,
- sbitmap *));
-static void compute_insert_delete PARAMS ((struct edge_list *edge_list,
- sbitmap *, sbitmap *,
- sbitmap *, sbitmap *,
- sbitmap *));
+static void compute_antinout_edge (sbitmap *, sbitmap *, sbitmap *, sbitmap *);
+static void compute_earliest (struct edge_list *, int, sbitmap *, sbitmap *,
+ sbitmap *, sbitmap *, sbitmap *);
+static void compute_laterin (struct edge_list *, sbitmap *, sbitmap *,
+ sbitmap *, sbitmap *);
+static void compute_insert_delete (struct edge_list *edge_list, sbitmap *,
+ sbitmap *, sbitmap *, sbitmap *, sbitmap *);
/* Edge based LCM routines on a reverse flowgraph. */
-static void compute_farthest PARAMS ((struct edge_list *, int,
- sbitmap *, sbitmap *,
- sbitmap*, sbitmap *,
- sbitmap *));
-static void compute_nearerout PARAMS ((struct edge_list *, sbitmap *,
- sbitmap *, sbitmap *,
- sbitmap *));
-static void compute_rev_insert_delete PARAMS ((struct edge_list *edge_list,
- sbitmap *, sbitmap *,
- sbitmap *, sbitmap *,
- sbitmap *));
+static void compute_farthest (struct edge_list *, int, sbitmap *, sbitmap *,
+ sbitmap*, sbitmap *, sbitmap *);
+static void compute_nearerout (struct edge_list *, sbitmap *, sbitmap *,
+ sbitmap *, sbitmap *);
+static void compute_rev_insert_delete (struct edge_list *edge_list, sbitmap *,
+ sbitmap *, sbitmap *, sbitmap *,
+ sbitmap *);
\f
/* Edge based lcm routines. */
Other than that, its pretty much identical to compute_antinout. */
static void
-compute_antinout_edge (antloc, transp, antin, antout)
- sbitmap *antloc;
- sbitmap *transp;
- sbitmap *antin;
- sbitmap *antout;
+compute_antinout_edge (sbitmap *antloc, sbitmap *transp, sbitmap *antin,
+ sbitmap *antout)
{
basic_block bb;
edge e;
basic_block *worklist, *qin, *qout, *qend;
unsigned int qlen;
+ edge_iterator ei;
/* Allocate a worklist array/queue. Entries are only added to the
list if they were not already on the list. So the size is
bounded by the number of basic blocks. */
- qin = qout = worklist
- = (basic_block *) xmalloc (sizeof (basic_block) * n_basic_blocks);
+ qin = qout = worklist = xmalloc (sizeof (basic_block) * n_basic_blocks);
/* We want a maximal solution, so make an optimistic initialization of
ANTIN. */
- sbitmap_vector_ones (antin, n_basic_blocks);
+ sbitmap_vector_ones (antin, last_basic_block);
/* Put every block on the worklist; this is necessary because of the
optimistic initialization of ANTIN above. */
FOR_EACH_BB_REVERSE (bb)
{
- *qin++ =bb;
+ *qin++ = bb;
bb->aux = bb;
}
/* Mark blocks which are predecessors of the exit block so that we
can easily identify them below. */
- for (e = EXIT_BLOCK_PTR->pred; e; e = e->pred_next)
+ FOR_EACH_EDGE (e, ei, EXIT_BLOCK_PTR->preds)
e->src->aux = EXIT_BLOCK_PTR;
/* Iterate until the worklist is empty. */
qlen--;
if (qout >= qend)
- qout = worklist;
+ qout = worklist;
if (bb->aux == EXIT_BLOCK_PTR)
/* Do not clear the aux field for blocks which are predecessors of
/* If the in state of this block changed, then we need
to add the predecessors of this block to the worklist
if they are not already on the worklist. */
- for (e = bb->pred; e; e = e->pred_next)
+ FOR_EACH_EDGE (e, ei, bb->preds)
if (!e->src->aux && e->src != ENTRY_BLOCK_PTR)
{
*qin++ = e->src;
e->src->aux = e;
qlen++;
if (qin >= qend)
- qin = worklist;
+ qin = worklist;
}
}
/* Compute the earliest vector for edge based lcm. */
static void
-compute_earliest (edge_list, n_exprs, antin, antout, avout, kill, earliest)
- struct edge_list *edge_list;
- int n_exprs;
- sbitmap *antin, *antout, *avout, *kill, *earliest;
+compute_earliest (struct edge_list *edge_list, int n_exprs, sbitmap *antin,
+ sbitmap *antout, sbitmap *avout, sbitmap *kill,
+ sbitmap *earliest)
{
sbitmap difference, temp_bitmap;
int x, num_edges;
if (pred == ENTRY_BLOCK_PTR)
sbitmap_copy (earliest[x], antin[succ->index]);
else
- {
- /* We refer to the EXIT_BLOCK index, instead of testing for
- EXIT_BLOCK_PTR, so that EXIT_BLOCK_PTR's index can be
- changed so as to pretend it's a regular block, so that
- its antin can be taken into account. */
- if (succ->index == EXIT_BLOCK)
+ {
+ if (succ == EXIT_BLOCK_PTR)
sbitmap_zero (earliest[x]);
else
{
to compute it. */
static void
-compute_laterin (edge_list, earliest, antloc, later, laterin)
- struct edge_list *edge_list;
- sbitmap *earliest, *antloc, *later, *laterin;
+compute_laterin (struct edge_list *edge_list, sbitmap *earliest,
+ sbitmap *antloc, sbitmap *later, sbitmap *laterin)
{
int num_edges, i;
edge e;
basic_block *worklist, *qin, *qout, *qend, bb;
unsigned int qlen;
+ edge_iterator ei;
num_edges = NUM_EDGES (edge_list);
list if they were not already on the list. So the size is
bounded by the number of basic blocks. */
qin = qout = worklist
- = (basic_block *) xmalloc (sizeof (basic_block) * (n_basic_blocks + 1));
+ = xmalloc (sizeof (basic_block) * (n_basic_blocks + 1));
/* Initialize a mapping from each edge to its index. */
for (i = 0; i < num_edges; i++)
do not want to be overly optimistic. Consider an outgoing edge from
the entry block. That edge should always have a LATER value the
same as EARLIEST for that edge. */
- for (e = ENTRY_BLOCK_PTR->succ; e; e = e->succ_next)
+ FOR_EACH_EDGE (e, ei, ENTRY_BLOCK_PTR->succs)
sbitmap_copy (later[(size_t) e->aux], earliest[(size_t) e->aux]);
/* Add all the blocks to the worklist. This prevents an early exit from
*qin++ = bb;
bb->aux = bb;
}
- qin = worklist;
+
/* Note that we do not use the last allocated element for our queue,
as EXIT_BLOCK is never inserted into it. In fact the above allocation
- of n_basic_blocks + 1 elements is not encessary. */
+ of n_basic_blocks + 1 elements is not necessary. */
+ qin = worklist;
qend = &worklist[n_basic_blocks];
qlen = n_basic_blocks;
bb->aux = NULL;
qlen--;
if (qout >= qend)
- qout = worklist;
+ qout = worklist;
/* Compute the intersection of LATERIN for each incoming edge to B. */
sbitmap_ones (laterin[bb->index]);
- for (e = bb->pred; e != NULL; e = e->pred_next)
- sbitmap_a_and_b (laterin[bb->index], laterin[bb->index], later[(size_t)e->aux]);
+ FOR_EACH_EDGE (e, ei, bb->preds)
+ sbitmap_a_and_b (laterin[bb->index], laterin[bb->index],
+ later[(size_t)e->aux]);
/* Calculate LATER for all outgoing edges. */
- for (e = bb->succ; e != NULL; e = e->succ_next)
+ FOR_EACH_EDGE (e, ei, bb->succs)
if (sbitmap_union_of_diff_cg (later[(size_t) e->aux],
earliest[(size_t) e->aux],
laterin[e->src->index],
/* Computation of insertion and deletion points requires computing LATERIN
for the EXIT block. We allocated an extra entry in the LATERIN array
for just this purpose. */
- sbitmap_ones (laterin[n_basic_blocks]);
- for (e = EXIT_BLOCK_PTR->pred; e != NULL; e = e->pred_next)
- sbitmap_a_and_b (laterin[n_basic_blocks],
- laterin[n_basic_blocks],
+ sbitmap_ones (laterin[last_basic_block]);
+ FOR_EACH_EDGE (e, ei, EXIT_BLOCK_PTR->preds)
+ sbitmap_a_and_b (laterin[last_basic_block],
+ laterin[last_basic_block],
later[(size_t) e->aux]);
clear_aux_for_edges ();
/* Compute the insertion and deletion points for edge based LCM. */
static void
-compute_insert_delete (edge_list, antloc, later, laterin,
- insert, delete)
- struct edge_list *edge_list;
- sbitmap *antloc, *later, *laterin, *insert, *delete;
+compute_insert_delete (struct edge_list *edge_list, sbitmap *antloc,
+ sbitmap *later, sbitmap *laterin, sbitmap *insert,
+ sbitmap *delete)
{
int x;
basic_block bb;
FOR_EACH_BB (bb)
- sbitmap_difference (delete[bb->index], antloc[bb->index], laterin[bb->index]);
+ sbitmap_difference (delete[bb->index], antloc[bb->index],
+ laterin[bb->index]);
for (x = 0; x < NUM_EDGES (edge_list); x++)
{
basic_block b = INDEX_EDGE_SUCC_BB (edge_list, x);
if (b == EXIT_BLOCK_PTR)
- sbitmap_difference (insert[x], later[x], laterin[n_basic_blocks]);
+ sbitmap_difference (insert[x], later[x], laterin[last_basic_block]);
else
sbitmap_difference (insert[x], later[x], laterin[b->index]);
}
map the insert vector to what edge an expression should be inserted on. */
struct edge_list *
-pre_edge_lcm (file, n_exprs, transp, avloc, antloc, kill, insert, delete)
- FILE *file ATTRIBUTE_UNUSED;
- int n_exprs;
- sbitmap *transp;
- sbitmap *avloc;
- sbitmap *antloc;
- sbitmap *kill;
- sbitmap **insert;
- sbitmap **delete;
+pre_edge_lcm (FILE *file ATTRIBUTE_UNUSED, int n_exprs, sbitmap *transp,
+ sbitmap *avloc, sbitmap *antloc, sbitmap *kill,
+ sbitmap **insert, sbitmap **delete)
{
sbitmap *antin, *antout, *earliest;
sbitmap *avin, *avout;
fprintf (file, "Edge List:\n");
verify_edge_list (file, edge_list);
print_edge_list (file, edge_list);
- dump_sbitmap_vector (file, "transp", "", transp, n_basic_blocks);
- dump_sbitmap_vector (file, "antloc", "", antloc, n_basic_blocks);
- dump_sbitmap_vector (file, "avloc", "", avloc, n_basic_blocks);
- dump_sbitmap_vector (file, "kill", "", kill, n_basic_blocks);
+ dump_sbitmap_vector (file, "transp", "", transp, last_basic_block);
+ dump_sbitmap_vector (file, "antloc", "", antloc, last_basic_block);
+ dump_sbitmap_vector (file, "avloc", "", avloc, last_basic_block);
+ dump_sbitmap_vector (file, "kill", "", kill, last_basic_block);
}
#endif
/* Compute global availability. */
- avin = sbitmap_vector_alloc (n_basic_blocks, n_exprs);
- avout = sbitmap_vector_alloc (n_basic_blocks, n_exprs);
+ avin = sbitmap_vector_alloc (last_basic_block, n_exprs);
+ avout = sbitmap_vector_alloc (last_basic_block, n_exprs);
compute_available (avloc, kill, avout, avin);
sbitmap_vector_free (avin);
/* Compute global anticipatability. */
- antin = sbitmap_vector_alloc (n_basic_blocks, n_exprs);
- antout = sbitmap_vector_alloc (n_basic_blocks, n_exprs);
+ antin = sbitmap_vector_alloc (last_basic_block, n_exprs);
+ antout = sbitmap_vector_alloc (last_basic_block, n_exprs);
compute_antinout_edge (antloc, transp, antin, antout);
#ifdef LCM_DEBUG_INFO
if (file)
{
- dump_sbitmap_vector (file, "antin", "", antin, n_basic_blocks);
- dump_sbitmap_vector (file, "antout", "", antout, n_basic_blocks);
+ dump_sbitmap_vector (file, "antin", "", antin, last_basic_block);
+ dump_sbitmap_vector (file, "antout", "", antout, last_basic_block);
}
#endif
later = sbitmap_vector_alloc (num_edges, n_exprs);
/* Allocate an extra element for the exit block in the laterin vector. */
- laterin = sbitmap_vector_alloc (n_basic_blocks + 1, n_exprs);
+ laterin = sbitmap_vector_alloc (last_basic_block + 1, n_exprs);
compute_laterin (edge_list, earliest, antloc, later, laterin);
#ifdef LCM_DEBUG_INFO
if (file)
{
- dump_sbitmap_vector (file, "laterin", "", laterin, n_basic_blocks + 1);
+ dump_sbitmap_vector (file, "laterin", "", laterin, last_basic_block + 1);
dump_sbitmap_vector (file, "later", "", later, num_edges);
}
#endif
sbitmap_vector_free (earliest);
*insert = sbitmap_vector_alloc (num_edges, n_exprs);
- *delete = sbitmap_vector_alloc (n_basic_blocks, n_exprs);
+ *delete = sbitmap_vector_alloc (last_basic_block, n_exprs);
compute_insert_delete (edge_list, antloc, later, laterin, *insert, *delete);
sbitmap_vector_free (laterin);
{
dump_sbitmap_vector (file, "pre_insert_map", "", *insert, num_edges);
dump_sbitmap_vector (file, "pre_delete_map", "", *delete,
- n_basic_blocks);
+ last_basic_block);
}
#endif
Return the number of passes we performed to iterate to a solution. */
void
-compute_available (avloc, kill, avout, avin)
- sbitmap *avloc, *kill, *avout, *avin;
+compute_available (sbitmap *avloc, sbitmap *kill, sbitmap *avout,
+ sbitmap *avin)
{
edge e;
basic_block *worklist, *qin, *qout, *qend, bb;
unsigned int qlen;
+ edge_iterator ei;
/* Allocate a worklist array/queue. Entries are only added to the
list if they were not already on the list. So the size is
bounded by the number of basic blocks. */
- qin = qout = worklist
- = (basic_block *) xmalloc (sizeof (basic_block) * n_basic_blocks);
+ qin = qout = worklist = xmalloc (sizeof (basic_block) * n_basic_blocks);
/* We want a maximal solution. */
- sbitmap_vector_ones (avout, n_basic_blocks);
+ sbitmap_vector_ones (avout, last_basic_block);
/* Put every block on the worklist; this is necessary because of the
optimistic initialization of AVOUT above. */
/* Mark blocks which are successors of the entry block so that we
can easily identify them below. */
- for (e = ENTRY_BLOCK_PTR->succ; e; e = e->succ_next)
+ FOR_EACH_EDGE (e, ei, ENTRY_BLOCK_PTR->succs)
e->dest->aux = ENTRY_BLOCK_PTR;
/* Iterate until the worklist is empty. */
qlen--;
if (qout >= qend)
- qout = worklist;
+ qout = worklist;
/* If one of the predecessor blocks is the ENTRY block, then the
intersection of avouts is the null set. We can identify such blocks
sbitmap_intersection_of_preds (avin[bb->index], avout, bb->index);
}
- if (sbitmap_union_of_diff_cg (avout[bb->index], avloc[bb->index], avin[bb->index], kill[bb->index]))
+ if (sbitmap_union_of_diff_cg (avout[bb->index], avloc[bb->index],
+ avin[bb->index], kill[bb->index]))
/* If the out state of this block changed, then we need
to add the successors of this block to the worklist
if they are not already on the worklist. */
- for (e = bb->succ; e; e = e->succ_next)
+ FOR_EACH_EDGE (e, ei, bb->succs)
if (!e->dest->aux && e->dest != EXIT_BLOCK_PTR)
{
*qin++ = e->dest;
qlen++;
if (qin >= qend)
- qin = worklist;
+ qin = worklist;
}
}
/* Compute the farthest vector for edge based lcm. */
static void
-compute_farthest (edge_list, n_exprs, st_avout, st_avin, st_antin,
- kill, farthest)
- struct edge_list *edge_list;
- int n_exprs;
- sbitmap *st_avout, *st_avin, *st_antin, *kill, *farthest;
+compute_farthest (struct edge_list *edge_list, int n_exprs,
+ sbitmap *st_avout, sbitmap *st_avin, sbitmap *st_antin,
+ sbitmap *kill, sbitmap *farthest)
{
sbitmap difference, temp_bitmap;
int x, num_edges;
implementation can be found before compute_laterin. */
static void
-compute_nearerout (edge_list, farthest, st_avloc, nearer, nearerout)
- struct edge_list *edge_list;
- sbitmap *farthest, *st_avloc, *nearer, *nearerout;
+compute_nearerout (struct edge_list *edge_list, sbitmap *farthest,
+ sbitmap *st_avloc, sbitmap *nearer, sbitmap *nearerout)
{
int num_edges, i;
edge e;
basic_block *worklist, *tos, bb;
+ edge_iterator ei;
num_edges = NUM_EDGES (edge_list);
/* Allocate a worklist array/queue. Entries are only added to the
list if they were not already on the list. So the size is
bounded by the number of basic blocks. */
- tos = worklist
- = (basic_block *) xmalloc (sizeof (basic_block) * (n_basic_blocks + 1));
+ tos = worklist = xmalloc (sizeof (basic_block) * (n_basic_blocks + 1));
/* Initialize NEARER for each edge and build a mapping from an edge to
its index. */
do not want to be overly optimistic. Consider an incoming edge to
the exit block. That edge should always have a NEARER value the
same as FARTHEST for that edge. */
- for (e = EXIT_BLOCK_PTR->pred; e; e = e->pred_next)
+ FOR_EACH_EDGE (e, ei, EXIT_BLOCK_PTR->preds)
sbitmap_copy (nearer[(size_t)e->aux], farthest[(size_t)e->aux]);
/* Add all the blocks to the worklist. This prevents an early exit
/* Compute the intersection of NEARER for each outgoing edge from B. */
sbitmap_ones (nearerout[bb->index]);
- for (e = bb->succ; e != NULL; e = e->succ_next)
+ FOR_EACH_EDGE (e, ei, bb->succs)
sbitmap_a_and_b (nearerout[bb->index], nearerout[bb->index],
nearer[(size_t) e->aux]);
/* Calculate NEARER for all incoming edges. */
- for (e = bb->pred; e != NULL; e = e->pred_next)
+ FOR_EACH_EDGE (e, ei, bb->preds)
if (sbitmap_union_of_diff_cg (nearer[(size_t) e->aux],
farthest[(size_t) e->aux],
nearerout[e->dest->index],
/* Computation of insertion and deletion points requires computing NEAREROUT
for the ENTRY block. We allocated an extra entry in the NEAREROUT array
for just this purpose. */
- sbitmap_ones (nearerout[n_basic_blocks]);
- for (e = ENTRY_BLOCK_PTR->succ; e != NULL; e = e->succ_next)
- sbitmap_a_and_b (nearerout[n_basic_blocks],
- nearerout[n_basic_blocks],
+ sbitmap_ones (nearerout[last_basic_block]);
+ FOR_EACH_EDGE (e, ei, ENTRY_BLOCK_PTR->succs)
+ sbitmap_a_and_b (nearerout[last_basic_block],
+ nearerout[last_basic_block],
nearer[(size_t) e->aux]);
clear_aux_for_edges ();
/* Compute the insertion and deletion points for edge based LCM. */
static void
-compute_rev_insert_delete (edge_list, st_avloc, nearer, nearerout,
- insert, delete)
- struct edge_list *edge_list;
- sbitmap *st_avloc, *nearer, *nearerout, *insert, *delete;
+compute_rev_insert_delete (struct edge_list *edge_list, sbitmap *st_avloc,
+ sbitmap *nearer, sbitmap *nearerout,
+ sbitmap *insert, sbitmap *delete)
{
int x;
basic_block bb;
FOR_EACH_BB (bb)
- sbitmap_difference (delete[bb->index], st_avloc[bb->index], nearerout[bb->index]);
+ sbitmap_difference (delete[bb->index], st_avloc[bb->index],
+ nearerout[bb->index]);
for (x = 0; x < NUM_EDGES (edge_list); x++)
{
basic_block b = INDEX_EDGE_PRED_BB (edge_list, x);
if (b == ENTRY_BLOCK_PTR)
- sbitmap_difference (insert[x], nearer[x], nearerout[n_basic_blocks]);
+ sbitmap_difference (insert[x], nearer[x], nearerout[last_basic_block]);
else
sbitmap_difference (insert[x], nearer[x], nearerout[b->index]);
}
an expression should be inserted on. */
struct edge_list *
-pre_edge_rev_lcm (file, n_exprs, transp, st_avloc, st_antloc, kill,
- insert, delete)
- FILE *file ATTRIBUTE_UNUSED;
- int n_exprs;
- sbitmap *transp;
- sbitmap *st_avloc;
- sbitmap *st_antloc;
- sbitmap *kill;
- sbitmap **insert;
- sbitmap **delete;
+pre_edge_rev_lcm (FILE *file ATTRIBUTE_UNUSED, int n_exprs, sbitmap *transp,
+ sbitmap *st_avloc, sbitmap *st_antloc, sbitmap *kill,
+ sbitmap **insert, sbitmap **delete)
{
sbitmap *st_antin, *st_antout;
sbitmap *st_avout, *st_avin, *farthest;
edge_list = create_edge_list ();
num_edges = NUM_EDGES (edge_list);
- st_antin = (sbitmap *) sbitmap_vector_alloc (n_basic_blocks, n_exprs);
- st_antout = (sbitmap *) sbitmap_vector_alloc (n_basic_blocks, n_exprs);
- sbitmap_vector_zero (st_antin, n_basic_blocks);
- sbitmap_vector_zero (st_antout, n_basic_blocks);
+ st_antin = sbitmap_vector_alloc (last_basic_block, n_exprs);
+ st_antout = sbitmap_vector_alloc (last_basic_block, n_exprs);
+ sbitmap_vector_zero (st_antin, last_basic_block);
+ sbitmap_vector_zero (st_antout, last_basic_block);
compute_antinout_edge (st_antloc, transp, st_antin, st_antout);
/* Compute global anticipatability. */
- st_avout = sbitmap_vector_alloc (n_basic_blocks, n_exprs);
- st_avin = sbitmap_vector_alloc (n_basic_blocks, n_exprs);
+ st_avout = sbitmap_vector_alloc (last_basic_block, n_exprs);
+ st_avin = sbitmap_vector_alloc (last_basic_block, n_exprs);
compute_available (st_avloc, kill, st_avout, st_avin);
#ifdef LCM_DEBUG_INFO
fprintf (file, "Edge List:\n");
verify_edge_list (file, edge_list);
print_edge_list (file, edge_list);
- dump_sbitmap_vector (file, "transp", "", transp, n_basic_blocks);
- dump_sbitmap_vector (file, "st_avloc", "", st_avloc, n_basic_blocks);
- dump_sbitmap_vector (file, "st_antloc", "", st_antloc, n_basic_blocks);
- dump_sbitmap_vector (file, "st_antin", "", st_antin, n_basic_blocks);
- dump_sbitmap_vector (file, "st_antout", "", st_antout, n_basic_blocks);
- dump_sbitmap_vector (file, "st_kill", "", kill, n_basic_blocks);
+ dump_sbitmap_vector (file, "transp", "", transp, last_basic_block);
+ dump_sbitmap_vector (file, "st_avloc", "", st_avloc, last_basic_block);
+ dump_sbitmap_vector (file, "st_antloc", "", st_antloc, last_basic_block);
+ dump_sbitmap_vector (file, "st_antin", "", st_antin, last_basic_block);
+ dump_sbitmap_vector (file, "st_antout", "", st_antout, last_basic_block);
+ dump_sbitmap_vector (file, "st_kill", "", kill, last_basic_block);
}
#endif
#ifdef LCM_DEBUG_INFO
if (file)
{
- dump_sbitmap_vector (file, "st_avout", "", st_avout, n_basic_blocks);
- dump_sbitmap_vector (file, "st_avin", "", st_avin, n_basic_blocks);
+ dump_sbitmap_vector (file, "st_avout", "", st_avout, last_basic_block);
+ dump_sbitmap_vector (file, "st_avin", "", st_avin, last_basic_block);
}
#endif
nearer = sbitmap_vector_alloc (num_edges, n_exprs);
/* Allocate an extra element for the entry block. */
- nearerout = sbitmap_vector_alloc (n_basic_blocks + 1, n_exprs);
+ nearerout = sbitmap_vector_alloc (last_basic_block + 1, n_exprs);
compute_nearerout (edge_list, farthest, st_avloc, nearer, nearerout);
#ifdef LCM_DEBUG_INFO
if (file)
{
dump_sbitmap_vector (file, "nearerout", "", nearerout,
- n_basic_blocks + 1);
+ last_basic_block + 1);
dump_sbitmap_vector (file, "nearer", "", nearer, num_edges);
}
#endif
sbitmap_vector_free (farthest);
*insert = sbitmap_vector_alloc (num_edges, n_exprs);
- *delete = sbitmap_vector_alloc (n_basic_blocks, n_exprs);
+ *delete = sbitmap_vector_alloc (last_basic_block, n_exprs);
compute_rev_insert_delete (edge_list, st_avloc, nearer, nearerout,
*insert, *delete);
{
dump_sbitmap_vector (file, "pre_insert_map", "", *insert, num_edges);
dump_sbitmap_vector (file, "pre_delete_map", "", *delete,
- n_basic_blocks);
+ last_basic_block);
}
#endif
return edge_list;
The LCM algorithm is then run over the flow graph to determine where to
place the sets to the highest-priority value in respect of first the first
- insn in any one block. Any adjustments required to the transparancy
+ insn in any one block. Any adjustments required to the transparency
vectors are made, then the next iteration starts for the next-lower
- priority mode, till for each entity all modes are exhasted.
+ priority mode, till for each entity all modes are exhausted.
More details are located in the code for optimize_mode_switching(). */
static sbitmap *delete;
static sbitmap *insert;
-static struct seginfo * new_seginfo PARAMS ((int, rtx, int, HARD_REG_SET));
-static void add_seginfo PARAMS ((struct bb_info *, struct seginfo *));
-static void reg_dies PARAMS ((rtx, HARD_REG_SET));
-static void reg_becomes_live PARAMS ((rtx, rtx, void *));
-static void make_preds_opaque PARAMS ((basic_block, int));
+static struct seginfo * new_seginfo (int, rtx, int, HARD_REG_SET);
+static void add_seginfo (struct bb_info *, struct seginfo *);
+static void reg_dies (rtx, HARD_REG_SET);
+static void reg_becomes_live (rtx, rtx, void *);
+static void make_preds_opaque (basic_block, int);
#endif
\f
#ifdef OPTIMIZE_MODE_SWITCHING
with the MODE, INSN, and basic block BB parameters. */
static struct seginfo *
-new_seginfo (mode, insn, bb, regs_live)
- int mode;
- rtx insn;
- int bb;
- HARD_REG_SET regs_live;
+new_seginfo (int mode, rtx insn, int bb, HARD_REG_SET regs_live)
{
struct seginfo *ptr;
ptr = xmalloc (sizeof (struct seginfo));
INFO is the structure to be linked in. */
static void
-add_seginfo (head, info)
- struct bb_info *head;
- struct seginfo *info;
+add_seginfo (struct bb_info *head, struct seginfo *info)
{
struct seginfo *ptr;
{
ptr = head->seginfo;
while (ptr->next != NULL)
- ptr = ptr->next;
+ ptr = ptr->next;
ptr->next = info;
}
}
we are currently handling mode-switching for. */
static void
-make_preds_opaque (b, j)
- basic_block b;
- int j;
+make_preds_opaque (basic_block b, int j)
{
edge e;
+ edge_iterator ei;
- for (e = b->pred; e; e = e->pred_next)
+ FOR_EACH_EDGE (e, ei, b->preds)
{
basic_block pb = e->src;
/* Record in LIVE that register REG died. */
static void
-reg_dies (reg, live)
- rtx reg;
- HARD_REG_SET live;
+reg_dies (rtx reg, HARD_REG_SET live)
{
int regno, nregs;
- if (GET_CODE (reg) != REG)
+ if (!REG_P (reg))
return;
regno = REGNO (reg);
if (regno < FIRST_PSEUDO_REGISTER)
- for (nregs = HARD_REGNO_NREGS (regno, GET_MODE (reg)) - 1; nregs >= 0;
+ for (nregs = hard_regno_nregs[regno][GET_MODE (reg)] - 1; nregs >= 0;
nregs--)
CLEAR_HARD_REG_BIT (live, regno + nregs);
}
This is called via note_stores. */
static void
-reg_becomes_live (reg, setter, live)
- rtx reg;
- rtx setter ATTRIBUTE_UNUSED;
- void *live;
+reg_becomes_live (rtx reg, rtx setter ATTRIBUTE_UNUSED, void *live)
{
int regno, nregs;
if (GET_CODE (reg) == SUBREG)
reg = SUBREG_REG (reg);
- if (GET_CODE (reg) != REG)
+ if (!REG_P (reg))
return;
regno = REGNO (reg);
if (regno < FIRST_PSEUDO_REGISTER)
- for (nregs = HARD_REGNO_NREGS (regno, GET_MODE (reg)) - 1; nregs >= 0;
+ for (nregs = hard_regno_nregs[regno][GET_MODE (reg)] - 1; nregs >= 0;
nregs--)
SET_HARD_REG_BIT (* (HARD_REG_SET *) live, regno + nregs);
}
+/* Make sure if MODE_ENTRY is defined the MODE_EXIT is defined
+ and vice versa. */
+#if defined (MODE_ENTRY) != defined (MODE_EXIT)
+ #error "Both MODE_ENTRY and MODE_EXIT must be defined"
+#endif
+
/* Find all insns that need a particular mode setting, and insert the
necessary mode switches. Return true if we did work. */
int
-optimize_mode_switching (file)
- FILE *file;
+optimize_mode_switching (FILE *file)
{
rtx insn;
int e;
int n_entities;
int max_num_modes = 0;
bool emited = false;
+ basic_block post_entry ATTRIBUTE_UNUSED, pre_exit ATTRIBUTE_UNUSED;
clear_bb_flags ();
-#ifdef NORMAL_MODE
- /* Increment n_basic_blocks before allocating bb_info. */
- n_basic_blocks++;
-#endif
for (e = N_ENTITIES - 1, n_entities = 0; e >= 0; e--)
if (OPTIMIZE_MODE_SWITCHING (e))
{
- /* Create the list of segments within each basic block. */
+ int entry_exit_extra = 0;
+
+ /* Create the list of segments within each basic block.
+ If NORMAL_MODE is defined, allow for two extra
+ blocks split from the entry and exit block. */
+#if defined (MODE_ENTRY) && defined (MODE_EXIT)
+ entry_exit_extra = 2;
+#endif
bb_info[n_entities]
- = (struct bb_info *) xcalloc (n_basic_blocks, sizeof **bb_info);
+ = xcalloc (last_basic_block + entry_exit_extra, sizeof **bb_info);
entity_map[n_entities++] = e;
if (num_modes[e] > max_num_modes)
max_num_modes = num_modes[e];
}
-#ifdef NORMAL_MODE
- /* Decrement it back in case we return below. */
- n_basic_blocks--;
-#endif
-
if (! n_entities)
return 0;
-#ifdef NORMAL_MODE
- /* We're going to pretend the EXIT_BLOCK is a regular basic block,
- so that switching back to normal mode when entering the
- EXIT_BLOCK isn't optimized away. We do this by incrementing the
- basic block count, growing the VARRAY of basic_block_info and
- appending the EXIT_BLOCK_PTR to it. */
- n_basic_blocks++;
- if (VARRAY_SIZE (basic_block_info) < n_basic_blocks)
- VARRAY_GROW (basic_block_info, n_basic_blocks);
- BASIC_BLOCK (n_basic_blocks - 1) = EXIT_BLOCK_PTR;
- EXIT_BLOCK_PTR->index = n_basic_blocks - 1;
+#if defined (MODE_ENTRY) && defined (MODE_EXIT)
+ {
+ /* Split the edge from the entry block and the fallthrough edge to the
+ exit block, so that we can note that there NORMAL_MODE is supplied /
+ required. */
+ edge eg;
+ edge_iterator ei;
+ post_entry = split_edge (EDGE_SUCC (ENTRY_BLOCK_PTR, 0));
+ /* The only non-call predecessor at this stage is a block with a
+ fallthrough edge; there can be at most one, but there could be
+ none at all, e.g. when exit is called. */
+ pre_exit = 0;
+ FOR_EACH_EDGE (eg, ei, EXIT_BLOCK_PTR->preds)
+ if (eg->flags & EDGE_FALLTHRU)
+ {
+ regset live_at_end = eg->src->global_live_at_end;
+
+ gcc_assert (!pre_exit);
+ pre_exit = split_edge (eg);
+ COPY_REG_SET (pre_exit->global_live_at_start, live_at_end);
+ COPY_REG_SET (pre_exit->global_live_at_end, live_at_end);
+ }
+ }
#endif
/* Create the bitmap vectors. */
- antic = sbitmap_vector_alloc (n_basic_blocks, n_entities);
- transp = sbitmap_vector_alloc (n_basic_blocks, n_entities);
- comp = sbitmap_vector_alloc (n_basic_blocks, n_entities);
+ antic = sbitmap_vector_alloc (last_basic_block, n_entities);
+ transp = sbitmap_vector_alloc (last_basic_block, n_entities);
+ comp = sbitmap_vector_alloc (last_basic_block, n_entities);
- sbitmap_vector_ones (transp, n_basic_blocks);
+ sbitmap_vector_ones (transp, last_basic_block);
for (j = n_entities - 1; j >= 0; j--)
{
REG_SET_TO_HARD_REG_SET (live_now,
bb->global_live_at_start);
- for (insn = bb->head;
- insn != NULL && insn != NEXT_INSN (bb->end);
+ for (insn = BB_HEAD (bb);
+ insn != NULL && insn != NEXT_INSN (BB_END (bb));
insn = NEXT_INSN (insn))
{
if (INSN_P (insn))
add_seginfo (info + bb->index, ptr);
RESET_BIT (transp[bb->index], j);
}
-
+#ifdef MODE_AFTER
+ last_mode = MODE_AFTER (last_mode, insn);
+#endif
/* Update LIVE_NOW. */
for (link = REG_NOTES (insn); link; link = XEXP (link, 1))
if (REG_NOTE_KIND (link) == REG_DEAD)
/* Check for blocks without ANY mode requirements. */
if (last_mode == no_mode)
{
- ptr = new_seginfo (no_mode, insn, bb->index, live_now);
+ ptr = new_seginfo (no_mode, BB_END (bb), bb->index, live_now);
add_seginfo (info + bb->index, ptr);
}
}
-#ifdef NORMAL_MODE
+#if defined (MODE_ENTRY) && defined (MODE_EXIT)
{
- int mode = NORMAL_MODE (e);
+ int mode = MODE_ENTRY (e);
if (mode != no_mode)
{
- edge eg;
+ bb = post_entry;
- for (eg = ENTRY_BLOCK_PTR->succ; eg; eg = eg->succ_next)
- {
- bb = eg->dest;
-
- /* By always making this nontransparent, we save
- an extra check in make_preds_opaque. We also
- need this to avoid confusing pre_edge_lcm when
- antic is cleared but transp and comp are set. */
- RESET_BIT (transp[bb->index], j);
-
- /* If the block already has MODE, pretend it
- has none (because we don't need to set it),
- but retain whatever mode it computes. */
- if (info[bb->index].seginfo->mode == mode)
- info[bb->index].seginfo->mode = no_mode;
-
- /* Insert a fake computing definition of MODE into entry
- blocks which compute no mode. This represents the mode on
- entry. */
- else if (info[bb->index].computing == no_mode)
- {
- info[bb->index].computing = mode;
- info[bb->index].seginfo->mode = no_mode;
- }
- }
+ /* By always making this nontransparent, we save
+ an extra check in make_preds_opaque. We also
+ need this to avoid confusing pre_edge_lcm when
+ antic is cleared but transp and comp are set. */
+ RESET_BIT (transp[bb->index], j);
- bb = EXIT_BLOCK_PTR;
- info[bb->index].seginfo->mode = mode;
+ /* Insert a fake computing definition of MODE into entry
+ blocks which compute no mode. This represents the mode on
+ entry. */
+ info[bb->index].computing = mode;
+
+ if (pre_exit)
+ info[pre_exit->index].seginfo->mode = MODE_EXIT (e);
}
}
#endif /* NORMAL_MODE */
}
- kill = sbitmap_vector_alloc (n_basic_blocks, n_entities);
+ kill = sbitmap_vector_alloc (last_basic_block, n_entities);
for (i = 0; i < max_num_modes; i++)
{
int current_mode[N_ENTITIES];
/* Set the anticipatable and computing arrays. */
- sbitmap_vector_zero (antic, n_basic_blocks);
- sbitmap_vector_zero (comp, n_basic_blocks);
+ sbitmap_vector_zero (antic, last_basic_block);
+ sbitmap_vector_zero (comp, last_basic_block);
for (j = n_entities - 1; j >= 0; j--)
{
int m = current_mode[j] = MODE_PRIORITY_TO_MODE (entity_map[j], i);
start_sequence ();
EMIT_MODE_SET (entity_map[j], mode, live_at_edge);
- mode_set = gen_sequence ();
+ mode_set = get_insns ();
end_sequence ();
/* Do not bother to insert empty sequence. */
- if (GET_CODE (mode_set) == SEQUENCE
- && !XVECLEN (mode_set, 0))
+ if (mode_set == NULL_RTX)
continue;
/* If this is an abnormal edge, we'll insert at the end
if (eg->flags & EDGE_ABNORMAL)
{
emited = true;
- if (GET_CODE (src_bb->end) == JUMP_INSN)
- emit_insn_before (mode_set, src_bb->end);
+ if (JUMP_P (BB_END (src_bb)))
+ emit_insn_before (mode_set, BB_END (src_bb));
/* It doesn't make sense to switch to normal mode
after a CALL_INSN, so we're going to abort if we
find one. The cases in which a CALL_INSN may
the call (it wouldn't make sense, anyway). In
the case of EH edges, EH entry points also start
in normal mode, so a similar reasoning applies. */
- else if (GET_CODE (src_bb->end) == INSN)
- emit_insn_after (mode_set, src_bb->end);
+ else if (NONJUMP_INSN_P (BB_END (src_bb)))
+ emit_insn_after (mode_set, BB_END (src_bb));
else
abort ();
bb_info[j][src_bb->index].computing = mode;
free_edge_list (edge_list);
}
-#ifdef NORMAL_MODE
- /* Restore the special status of EXIT_BLOCK. */
- n_basic_blocks--;
- VARRAY_POP (basic_block_info);
- EXIT_BLOCK_PTR->index = EXIT_BLOCK;
-#endif
-
/* Now output the remaining mode sets in all the segments. */
for (j = n_entities - 1; j >= 0; j--)
{
int no_mode = num_modes[entity_map[j]];
-#ifdef NORMAL_MODE
- if (bb_info[j][n_basic_blocks].seginfo->mode != no_mode)
- {
- edge eg;
- struct seginfo *ptr = bb_info[j][n_basic_blocks].seginfo;
-
- for (eg = EXIT_BLOCK_PTR->pred; eg; eg = eg->pred_next)
- {
- rtx mode_set;
-
- if (bb_info[j][eg->src->index].computing == ptr->mode)
- continue;
-
- start_sequence ();
- EMIT_MODE_SET (entity_map[j], ptr->mode, ptr->regs_live);
- mode_set = gen_sequence ();
- end_sequence ();
-
- /* Do not bother to insert empty sequence. */
- if (GET_CODE (mode_set) == SEQUENCE
- && !XVECLEN (mode_set, 0))
- continue;
-
- /* If this is an abnormal edge, we'll insert at the end of the
- previous block. */
- if (eg->flags & EDGE_ABNORMAL)
- {
- emited = true;
- if (GET_CODE (eg->src->end) == JUMP_INSN)
- emit_insn_before (mode_set, eg->src->end);
- else if (GET_CODE (eg->src->end) == INSN)
- emit_insn_after (mode_set, eg->src->end);
- else
- abort ();
- }
- else
- {
- need_commit = 1;
- insert_insn_on_edge (mode_set, eg);
- }
- }
-
- }
-#endif
-
FOR_EACH_BB_REVERSE (bb)
{
struct seginfo *ptr, *next;
start_sequence ();
EMIT_MODE_SET (entity_map[j], ptr->mode, ptr->regs_live);
- mode_set = gen_sequence ();
+ mode_set = get_insns ();
end_sequence ();
/* Do not bother to insert empty sequence. */
- if (GET_CODE (mode_set) == SEQUENCE
- && !XVECLEN (mode_set, 0))
+ if (mode_set == NULL_RTX)
continue;
emited = true;
- if (GET_CODE (ptr->insn_ptr) == NOTE
+ if (NOTE_P (ptr->insn_ptr)
&& (NOTE_LINE_NUMBER (ptr->insn_ptr)
== NOTE_INSN_BASIC_BLOCK))
emit_insn_after (mode_set, ptr->insn_ptr);
if (need_commit)
commit_edge_insertions ();
+#if defined (MODE_ENTRY) && defined (MODE_EXIT)
+ cleanup_cfg (CLEANUP_NO_INSN_DEL);
+#else
if (!need_commit && !emited)
return 0;
+#endif
max_regno = max_reg_num ();
allocate_reg_info (max_regno, FALSE, FALSE);
OSDN Git Service
