We perform the following steps:
- 1) Compute basic block information.
+ 1) Compute table of places where registers are set.
- 2) Compute table of places where registers are set.
+ 2) Perform copy/constant propagation.
- 3) Perform copy/constant propagation.
-
- 4) Perform global cse using lazy code motion if not optimizing
+ 3) Perform global cse using lazy code motion if not optimizing
for size, or code hoisting if we are.
- 5) Perform another pass of copy/constant propagation.
+ 4) Perform another pass of copy/constant propagation. Try to bypass
+ conditional jumps if the condition can be computed from a value of
+ an incoming edge.
+
+ 5) Perform store motion.
Two passes of copy/constant propagation are done because the first one
enables more GCSE and the second one helps to clean up the copies that
(set (pseudo-reg) (expression)).
Function want_to_gcse_p says what these are.
+ In addition, expressions in REG_EQUAL notes are candidates for GXSE-ing.
+ This allows PRE to hoist expressions that are expressed in multiple insns,
+ such as comprex address calculations (e.g. for PIC code, or loads with a
+ high part and as lowe part).
+
PRE handles moving invariant expressions out of loops (by treating them as
partially redundant).
It was found doing copy propagation between each pass enables further
substitutions.
+ This study was done before expressions in REG_EQUAL notes were added as
+ candidate expressions for optimization, and before the GIMPLE optimizers
+ were added. Probably, multiple passes is even less efficient now than
+ at the time when the study was conducted.
+
PRE is quite expensive in complicated functions because the DFA can take
- a while to converge. Hence we only perform one pass. The parameter
- max-gcse-passes can be modified if one wants to experiment.
+ a while to converge. Hence we only perform one pass.
**********************
static void record_one_set (int, rtx);
static void record_set_info (rtx, const_rtx, void *);
static void compute_sets (void);
-static void hash_scan_insn (rtx, struct hash_table *, int);
+static void hash_scan_insn (rtx, struct hash_table *);
static void hash_scan_set (rtx, rtx, struct hash_table *);
static void hash_scan_clobber (rtx, rtx, struct hash_table *);
static void hash_scan_call (rtx, rtx, struct hash_table *);
static void free_modify_mem_tables (void);
static rtx gcse_emit_move_after (rtx, rtx, rtx);
static void local_cprop_find_used_regs (rtx *, void *);
-static bool do_local_cprop (rtx, rtx, bool, rtx*);
-static bool adjust_libcall_notes (rtx, rtx, rtx, rtx*);
+static bool do_local_cprop (rtx, rtx, bool);
static void local_cprop_pass (bool);
static bool is_too_expensive (const char *);
+
+#define GNEW(T) ((T *) gmalloc (sizeof (T)))
+#define GCNEW(T) ((T *) gcalloc (1, sizeof (T)))
+
+#define GNEWVEC(T, N) ((T *) gmalloc (sizeof (T) * (N)))
+#define GCNEWVEC(T, N) ((T *) gcalloc ((N), sizeof (T)))
+#define GRESIZEVEC(T, P, N) ((T *) grealloc ((void *) (P), sizeof (T) * (N)))
+
+#define GNEWVAR(T, S) ((T *) gmalloc ((S)))
+#define GCNEWVAR(T, S) ((T *) gcalloc (1, (S)))
+#define GRESIZEVAR(T, P, S) ((T *) grealloc ((P), (S)))
+
+#define GOBNEW(T) ((T *) gcse_alloc (sizeof (T)))
+#define GOBNEWVAR(T, S) ((T *) gcse_alloc ((S)))
\f
/* Entry point for global common subexpression elimination.
static int
gcse_main (rtx f ATTRIBUTE_UNUSED)
{
- int changed, pass;
- /* Bytes used at start of pass. */
- int initial_bytes_used;
- /* Maximum number of bytes used by a pass. */
- int max_pass_bytes;
+ int changed;
/* Point to release obstack data from for each pass. */
char *gcse_obstack_bottom;
/* We need alias. */
init_alias_analysis ();
+
/* Record where pseudo-registers are set. This data is kept accurate
during each pass. ??? We could also record hard-reg information here
[since it's unchanging], however it is currently done during hash table
It may be tempting to compute MEM set information here too, but MEM sets
will be subject to code motion one day and thus we need to compute
- information about memory sets when we build the hash tables. */
+ information about memory sets when we build the hash tables.
+
+ ??? Actually, we already know the information that compute_sets computes
+ because it is available from DF. FIXME. */
alloc_reg_set_mem (max_gcse_regno);
compute_sets ();
- pass = 0;
- initial_bytes_used = bytes_used;
- max_pass_bytes = 0;
- gcse_obstack_bottom = gcse_alloc (1);
- changed = 1;
- while (changed && pass < MAX_GCSE_PASSES)
- {
- changed = 0;
- if (dump_file)
- fprintf (dump_file, "GCSE pass %d\n\n", pass + 1);
-
- /* Initialize bytes_used to the space for the pred/succ lists,
- and the reg_set_table data. */
- bytes_used = initial_bytes_used;
+ gcse_obstack_bottom = GOBNEWVAR (char, 1);
+ changed = 0;
+
+ if (dump_file)
+ fprintf (dump_file, "GCSE pass\n\n");
- /* Each pass may create new registers, so recalculate each time. */
- max_gcse_regno = max_reg_num ();
+ max_gcse_regno = max_reg_num ();
- alloc_gcse_mem ();
+ alloc_gcse_mem ();
- /* Don't allow constant propagation to modify jumps
- during this pass. */
- if (dbg_cnt (cprop1))
- {
- timevar_push (TV_CPROP1);
- changed = one_cprop_pass (pass + 1, false, false);
- timevar_pop (TV_CPROP1);
- }
+ /* Don't allow constant propagation to modify jumps
+ during this pass. */
+ if (dbg_cnt (cprop1))
+ {
+ timevar_push (TV_CPROP1);
+ changed = one_cprop_pass (1, false, false);
+ timevar_pop (TV_CPROP1);
+ }
- if (optimize_size)
- /* Do nothing. */ ;
- else
+ if (optimize_function_for_speed_p (cfun))
+ {
+ timevar_push (TV_PRE);
+ changed |= one_pre_gcse_pass (1);
+ /* We may have just created new basic blocks. Release and
+ recompute various things which are sized on the number of
+ basic blocks.
+ ??? There would be no need for this if we used a block
+ based Lazy Code Motion variant, with all (or selected)
+ edges split before running the pass. That would also
+ help find_implicit_sets for cprop. FIXME. */
+ if (changed)
{
- timevar_push (TV_PRE);
- changed |= one_pre_gcse_pass (pass + 1);
- /* We may have just created new basic blocks. Release and
- recompute various things which are sized on the number of
- basic blocks. */
- if (changed)
- {
- free_modify_mem_tables ();
- modify_mem_list = gcalloc (last_basic_block, sizeof (rtx));
- canon_modify_mem_list = gcalloc (last_basic_block, sizeof (rtx));
- }
- free_reg_set_mem ();
- alloc_reg_set_mem (max_reg_num ());
- compute_sets ();
- run_jump_opt_after_gcse = 1;
- timevar_pop (TV_PRE);
+ free_modify_mem_tables ();
+ modify_mem_list = GCNEWVEC (rtx, last_basic_block);
+ canon_modify_mem_list = GCNEWVEC (rtx, last_basic_block);
}
- if (max_pass_bytes < bytes_used)
- max_pass_bytes = bytes_used;
-
- /* Free up memory, then reallocate for code hoisting. We can
- not re-use the existing allocated memory because the tables
- will not have info for the insns or registers created by
- partial redundancy elimination. */
- free_gcse_mem ();
-
- /* It does not make sense to run code hoisting unless we are optimizing
+ /* ??? When we allocate this at the start of the function,
+ the comment says that "this data is kept accurate during
+ each pass". Apparently this is not so? FIXME. */
+ free_reg_set_mem ();
+ alloc_reg_set_mem (max_reg_num ());
+ compute_sets ();
+ run_jump_opt_after_gcse = 1;
+ timevar_pop (TV_PRE);
+ }
+ else
+ {
+ /* This function is being optimized for code size.
+ It does not make sense to run code hoisting unless we are optimizing
for code size -- it rarely makes programs faster, and can make
them bigger if we did partial redundancy elimination (when optimizing
for space, we don't run the partial redundancy algorithms). */
- if (optimize_size)
- {
- timevar_push (TV_HOIST);
- max_gcse_regno = max_reg_num ();
- alloc_gcse_mem ();
- changed |= one_code_hoisting_pass ();
- free_gcse_mem ();
-
- if (max_pass_bytes < bytes_used)
- max_pass_bytes = bytes_used;
- timevar_pop (TV_HOIST);
- }
+ timevar_push (TV_HOIST);
+ max_gcse_regno = max_reg_num ();
+ alloc_gcse_mem ();
+ one_code_hoisting_pass ();
+ timevar_pop (TV_HOIST);
+ }
- if (dump_file)
- {
- fprintf (dump_file, "\n");
- fflush (dump_file);
- }
+ free_gcse_mem ();
- obstack_free (&gcse_obstack, gcse_obstack_bottom);
- pass++;
+ if (dump_file)
+ {
+ fprintf (dump_file, "\n");
+ fflush (dump_file);
}
- /* Do one last pass of copy propagation, including cprop into
- conditional jumps. */
+ obstack_free (&gcse_obstack, gcse_obstack_bottom);
+ /* Do the second const/copy propagation pass, including cprop into
+ conditional jumps. */
if (dbg_cnt (cprop2))
{
max_gcse_regno = max_reg_num ();
/* This time, go ahead and allow cprop to alter jumps. */
timevar_push (TV_CPROP2);
- one_cprop_pass (pass + 1, true, true);
+ one_cprop_pass (2, true, true);
timevar_pop (TV_CPROP2);
free_gcse_mem ();
}
{
fprintf (dump_file, "GCSE of %s: %d basic blocks, ",
current_function_name (), n_basic_blocks);
- fprintf (dump_file, "%d pass%s, %d bytes\n\n",
- pass, pass > 1 ? "es" : "", max_pass_bytes);
+ fprintf (dump_file, "pass 1, %d bytes\n\n", bytes_used);
}
obstack_free (&gcse_obstack, NULL);
free_reg_set_mem ();
- /* We are finished with alias. */
+ /* We are finished with alias.
+ ??? Actually we recompute alias in store_motion. */
end_alias_analysis ();
- if (!optimize_size && flag_gcse_sm)
+ /* Run store motion. */
+ if (optimize_function_for_speed_p (cfun) && flag_gcse_sm)
{
timevar_push (TV_LSM);
store_motion ();
but we should never see those anyway, so this is OK.) */
max_uid = get_max_uid ();
- uid_cuid = gcalloc (max_uid + 1, sizeof (int));
+ uid_cuid = GCNEWVEC (int, max_uid + 1);
i = 0;
FOR_EACH_BB (bb)
FOR_BB_INSNS (bb, insn)
reg_set_in_block = sbitmap_vector_alloc (last_basic_block, max_gcse_regno);
/* Allocate array to keep a list of insns which modify memory in each
basic block. */
- modify_mem_list = gcalloc (last_basic_block, sizeof (rtx));
- canon_modify_mem_list = gcalloc (last_basic_block, sizeof (rtx));
+ modify_mem_list = GCNEWVEC (rtx, last_basic_block);
+ canon_modify_mem_list = GCNEWVEC (rtx, last_basic_block);
modify_mem_list_set = BITMAP_ALLOC (NULL);
blocks_with_calls = BITMAP_ALLOC (NULL);
}
alloc_reg_set_mem (int n_regs)
{
reg_set_table_size = n_regs + REG_SET_TABLE_SLOP;
- reg_set_table = gcalloc (reg_set_table_size, sizeof (struct reg_set *));
+ reg_set_table = GCNEWVEC (struct reg_set *, reg_set_table_size);
gcc_obstack_init (®_set_obstack);
}
{
int new_size = regno + REG_SET_TABLE_SLOP;
- reg_set_table = grealloc (reg_set_table,
- new_size * sizeof (struct reg_set *));
+ reg_set_table = GRESIZEVEC (struct reg_set *, reg_set_table, new_size);
memset (reg_set_table + reg_set_table_size, 0,
(new_size - reg_set_table_size) * sizeof (struct reg_set *));
reg_set_table_size = new_size;
}
- new_reg_info = obstack_alloc (®_set_obstack, sizeof (struct reg_set));
+ new_reg_info = XOBNEW (®_set_obstack, struct reg_set);
bytes_used += sizeof (struct reg_set);
new_reg_info->bb_index = BLOCK_NUM (insn);
new_reg_info->next = reg_set_table[regno];
if (! found)
{
- cur_expr = gcse_alloc (sizeof (struct expr));
+ cur_expr = GOBNEW (struct expr);
bytes_used += sizeof (struct expr);
if (table->table[hash] == NULL)
/* This is the first pattern that hashed to this index. */
else
{
/* First occurrence of this expression in this basic block. */
- antic_occr = gcse_alloc (sizeof (struct occr));
+ antic_occr = GOBNEW (struct occr);
bytes_used += sizeof (struct occr);
antic_occr->insn = insn;
antic_occr->next = cur_expr->antic_occr;
else
{
/* First occurrence of this expression in this basic block. */
- avail_occr = gcse_alloc (sizeof (struct occr));
+ avail_occr = GOBNEW (struct occr);
bytes_used += sizeof (struct occr);
avail_occr->insn = insn;
avail_occr->next = cur_expr->avail_occr;
if (! found)
{
- cur_expr = gcse_alloc (sizeof (struct expr));
+ cur_expr = GOBNEW (struct expr);
bytes_used += sizeof (struct expr);
if (table->table[hash] == NULL)
/* This is the first pattern that hashed to this index. */
else
{
/* First occurrence of this expression in this basic block. */
- cur_occr = gcse_alloc (sizeof (struct occr));
+ cur_occr = GOBNEW (struct occr);
bytes_used += sizeof (struct occr);
cur_occr->insn = insn;
same PRE GCSE operation repeatedly on the same REG_EQUAL value if we
do more than one PRE GCSE pass.
- Note that this does not impede profitale constant propagations. We
+ Note that this does not impede profitable constant propagations. We
"look through" reg-reg sets in lookup_avail_set. */
note = find_reg_equal_equiv_note (insn);
if (note != 0
are also in the PARALLEL. Later.
If SET_P is nonzero, this is for the assignment hash table,
- otherwise it is for the expression hash table.
- If IN_LIBCALL_BLOCK nonzero, we are in a libcall block, and should
- not record any expressions. */
+ otherwise it is for the expression hash table. */
static void
-hash_scan_insn (rtx insn, struct hash_table *table, int in_libcall_block)
+hash_scan_insn (rtx insn, struct hash_table *table)
{
rtx pat = PATTERN (insn);
int i;
- if (in_libcall_block)
- return;
-
/* Pick out the sets of INSN and for other forms of instructions record
what's been modified. */
unsigned int *hash_val;
struct expr *expr;
- flat_table = xcalloc (table->n_elems, sizeof (struct expr *));
- hash_val = xmalloc (table->n_elems * sizeof (unsigned int));
+ flat_table = XCNEWVEC (struct expr *, table->n_elems);
+ hash_val = XNEWVEC (unsigned int, table->n_elems);
for (i = 0; i < (int) table->size; i++)
for (expr = table->table[i]; expr != NULL; expr = expr->next_same_hash)
/* re-Cache any INSN_LIST nodes we have allocated. */
clear_modify_mem_tables ();
/* Some working arrays used to track first and last set in each block. */
- reg_avail_info = gmalloc (max_gcse_regno * sizeof (struct reg_avail_info));
+ reg_avail_info = GNEWVEC (struct reg_avail_info, max_gcse_regno);
for (i = 0; i < max_gcse_regno; ++i)
reg_avail_info[i].last_bb = NULL;
{
rtx insn;
unsigned int regno;
- int in_libcall_block;
/* First pass over the instructions records information used to
determine when registers and memory are first and last set.
BB_HEAD (current_bb), table);
/* The next pass builds the hash table. */
- in_libcall_block = 0;
FOR_BB_INSNS (current_bb, insn)
if (INSN_P (insn))
- {
- if (find_reg_note (insn, REG_LIBCALL, NULL_RTX))
- in_libcall_block = 1;
- else if (table->set_p && find_reg_note (insn, REG_RETVAL, NULL_RTX))
- in_libcall_block = 0;
- hash_scan_insn (insn, table, in_libcall_block);
- if (!table->set_p && find_reg_note (insn, REG_RETVAL, NULL_RTX))
- in_libcall_block = 0;
- }
+ hash_scan_insn (insn, table);
}
free (reg_avail_info);
??? Later take some measurements. */
table->size |= 1;
n = table->size * sizeof (struct expr *);
- table->table = gmalloc (n);
+ table->table = GNEWVAR (struct expr *, n);
table->set_p = set_p;
}
static int
cprop_jump (basic_block bb, rtx setcc, rtx jump, rtx from, rtx src)
{
- rtx new, set_src, note_src;
+ rtx new_rtx, set_src, note_src;
rtx set = pc_set (jump);
rtx note = find_reg_equal_equiv_note (jump);
else
setcc = NULL_RTX;
- new = simplify_replace_rtx (set_src, from, src);
+ new_rtx = simplify_replace_rtx (set_src, from, src);
/* If no simplification can be made, then try the next register. */
- if (rtx_equal_p (new, SET_SRC (set)))
+ if (rtx_equal_p (new_rtx, SET_SRC (set)))
return 0;
/* If this is now a no-op delete it, otherwise this must be a valid insn. */
- if (new == pc_rtx)
+ if (new_rtx == pc_rtx)
delete_insn (jump);
else
{
/* Ensure the value computed inside the jump insn to be equivalent
to one computed by setcc. */
- if (setcc && modified_in_p (new, setcc))
+ if (setcc && modified_in_p (new_rtx, setcc))
return 0;
- if (! validate_unshare_change (jump, &SET_SRC (set), new, 0))
+ if (! validate_unshare_change (jump, &SET_SRC (set), new_rtx, 0))
{
/* When (some) constants are not valid in a comparison, and there
are two registers to be replaced by constants before the entire
we need to attach a note to the branch itself to make this
optimization work. */
- if (!rtx_equal_p (new, note_src))
- set_unique_reg_note (jump, REG_EQUAL, copy_rtx (new));
+ if (!rtx_equal_p (new_rtx, note_src))
+ set_unique_reg_note (jump, REG_EQUAL, copy_rtx (new_rtx));
return 0;
}
/* If a conditional jump has been changed into unconditional jump, remove
the jump and make the edge fallthru - this is always called in
cfglayout mode. */
- if (new != pc_rtx && simplejump_p (jump))
+ if (new_rtx != pc_rtx && simplejump_p (jump))
{
edge e;
edge_iterator ei;
find_used_regs (xptr, data);
}
-/* LIBCALL_SP is a zero-terminated array of insns at the end of a libcall;
- their REG_EQUAL notes need updating. */
+/* Try to perform local const/copy propagation on X in INSN.
+ If ALTER_JUMPS is false, changing jump insns is not allowed. */
static bool
-do_local_cprop (rtx x, rtx insn, bool alter_jumps, rtx *libcall_sp)
+do_local_cprop (rtx x, rtx insn, bool alter_jumps)
{
rtx newreg = NULL, newcnst = NULL;
rtx this_rtx = l->loc;
rtx note;
- /* Don't CSE non-constant values out of libcall blocks. */
- if (l->in_libcall && ! CONSTANT_P (this_rtx))
- continue;
-
if (gcse_constant_p (this_rtx))
newcnst = this_rtx;
if (REG_P (this_rtx) && REGNO (this_rtx) >= FIRST_PSEUDO_REGISTER
}
if (newcnst && constprop_register (insn, x, newcnst, alter_jumps))
{
- /* If we find a case where we can't fix the retval REG_EQUAL notes
- match the new register, we either have to abandon this replacement
- or fix delete_trivially_dead_insns to preserve the setting insn,
- or make it delete the REG_EQUAL note, and fix up all passes that
- require the REG_EQUAL note there. */
- bool adjusted;
-
- adjusted = adjust_libcall_notes (x, newcnst, insn, libcall_sp);
- gcc_assert (adjusted);
-
if (dump_file != NULL)
{
fprintf (dump_file, "LOCAL CONST-PROP: Replacing reg %d in ",
}
else if (newreg && newreg != x && try_replace_reg (x, newreg, insn))
{
- adjust_libcall_notes (x, newreg, insn, libcall_sp);
if (dump_file != NULL)
{
fprintf (dump_file,
return false;
}
-/* LIBCALL_SP is a zero-terminated array of insns at the end of a libcall;
- their REG_EQUAL notes need updating to reflect that OLDREG has been
- replaced with NEWVAL in INSN. Return true if all substitutions could
- be made. */
-static bool
-adjust_libcall_notes (rtx oldreg, rtx newval, rtx insn, rtx *libcall_sp)
-{
- rtx end;
-
- while ((end = *libcall_sp++))
- {
- rtx note = find_reg_equal_equiv_note (end);
-
- if (! note)
- continue;
-
- if (REG_P (newval))
- {
- if (reg_set_between_p (newval, PREV_INSN (insn), end))
- {
- do
- {
- note = find_reg_equal_equiv_note (end);
- if (! note)
- continue;
- if (reg_mentioned_p (newval, XEXP (note, 0)))
- return false;
- }
- while ((end = *libcall_sp++));
- return true;
- }
- }
- XEXP (note, 0) = simplify_replace_rtx (XEXP (note, 0), oldreg, newval);
- df_notes_rescan (end);
- insn = end;
- }
- return true;
-}
-
-#define MAX_NESTED_LIBCALLS 9
-
/* Do local const/copy propagation (i.e. within each basic block).
If ALTER_JUMPS is true, allow propagating into jump insns, which
could modify the CFG. */
basic_block bb;
rtx insn;
struct reg_use *reg_used;
- rtx libcall_stack[MAX_NESTED_LIBCALLS + 1], *libcall_sp;
bool changed = false;
cselib_init (false);
- libcall_sp = &libcall_stack[MAX_NESTED_LIBCALLS];
- *libcall_sp = 0;
FOR_EACH_BB (bb)
{
FOR_BB_INSNS (bb, insn)
{
if (INSN_P (insn))
{
- rtx note = find_reg_note (insn, REG_LIBCALL, NULL_RTX);
-
- if (note)
- {
- gcc_assert (libcall_sp != libcall_stack);
- *--libcall_sp = XEXP (note, 0);
- }
- note = find_reg_note (insn, REG_RETVAL, NULL_RTX);
- if (note)
- libcall_sp++;
- note = find_reg_equal_equiv_note (insn);
+ rtx note = find_reg_equal_equiv_note (insn);
do
{
reg_use_count = 0;
for (reg_used = ®_use_table[0]; reg_use_count > 0;
reg_used++, reg_use_count--)
{
- if (do_local_cprop (reg_used->reg_rtx, insn, alter_jumps,
- libcall_sp))
+ if (do_local_cprop (reg_used->reg_rtx, insn, alter_jumps))
{
changed = true;
break;
cselib_process_insn (insn);
}
- /* Forget everything at the end of a basic block. Make sure we are
- not inside a libcall, they should never cross basic blocks. */
+ /* Forget everything at the end of a basic block. */
cselib_clear_table ();
- gcc_assert (libcall_sp == &libcall_stack[MAX_NESTED_LIBCALLS]);
}
cselib_finish ();
{
basic_block bb, dest;
unsigned int count;
- rtx cond, new;
+ rtx cond, new_rtx;
count = 0;
FOR_EACH_BB (bb)
if (dest && single_pred_p (dest)
&& dest != EXIT_BLOCK_PTR)
{
- new = gen_rtx_SET (VOIDmode, XEXP (cond, 0),
+ new_rtx = gen_rtx_SET (VOIDmode, XEXP (cond, 0),
XEXP (cond, 1));
- implicit_sets[dest->index] = new;
+ implicit_sets[dest->index] = new_rtx;
if (dump_file)
{
fprintf(dump_file, "Implicit set of reg %d in ",
unsigned int regno = REGNO (reg_used->reg_rtx);
basic_block dest, old_dest;
struct expr *set;
- rtx src, new;
+ rtx src, new_rtx;
if (regno >= max_gcse_regno)
continue;
SET_DEST (PATTERN (setcc)),
SET_SRC (PATTERN (setcc)));
- new = simplify_replace_rtx (src, reg_used->reg_rtx,
+ new_rtx = simplify_replace_rtx (src, reg_used->reg_rtx,
SET_SRC (set->expr));
/* Jump bypassing may have already placed instructions on
has instructions associated with it, as these insns won't
get executed if the incoming edge is redirected. */
- if (new == pc_rtx)
+ if (new_rtx == pc_rtx)
{
edest = FALLTHRU_EDGE (bb);
dest = edest->insns.r ? NULL : edest->dest;
}
- else if (GET_CODE (new) == LABEL_REF)
+ else if (GET_CODE (new_rtx) == LABEL_REF)
{
- dest = BLOCK_FOR_INSN (XEXP (new, 0));
+ dest = BLOCK_FOR_INSN (XEXP (new_rtx, 0));
/* Don't bypass edges containing instructions. */
edest = find_edge (bb, dest);
if (edest && edest->insns.r)
static rtx
gcse_emit_move_after (rtx src, rtx dest, rtx insn)
{
- rtx new;
+ rtx new_rtx;
rtx set = single_set (insn), set2;
rtx note;
rtx eqv;
/* This should never fail since we're creating a reg->reg copy
we've verified to be valid. */
- new = emit_insn_after (gen_move_insn (dest, src), insn);
+ new_rtx = emit_insn_after (gen_move_insn (dest, src), insn);
/* Note the equivalence for local CSE pass. */
- set2 = single_set (new);
+ set2 = single_set (new_rtx);
if (!set2 || !rtx_equal_p (SET_DEST (set2), dest))
- return new;
+ return new_rtx;
if ((note = find_reg_equal_equiv_note (insn)))
eqv = XEXP (note, 0);
else
eqv = SET_SRC (set);
- set_unique_reg_note (new, REG_EQUAL, copy_insn_1 (eqv));
+ set_unique_reg_note (new_rtx, REG_EQUAL, copy_insn_1 (eqv));
- return new;
+ return new_rtx;
}
/* Delete redundant computations.
such a LABEL_REF, so we don't have to handle REG_LABEL_TARGET
notes. */
gcc_assert (!JUMP_P (insn));
- REG_NOTES (insn)
- = gen_rtx_INSN_LIST (REG_LABEL_OPERAND, XEXP (x, 0),
- REG_NOTES (insn));
+ add_reg_note (insn, REG_LABEL_OPERAND, XEXP (x, 0));
+
if (LABEL_P (XEXP (x, 0)))
LABEL_NUSES (XEXP (x, 0))++;
FOR_EACH_BB (bb)
{
- /* Note that flow inserted a nop a the end of basic blocks that
+ /* Note that flow inserted a nop at the end of basic blocks that
end in call instructions for reasons other than abnormal
control flow. */
if (! CALL_P (BB_END (bb)))
pre_ldst_expr_hash (const void *p)
{
int do_not_record_p = 0;
- const struct ls_expr *x = p;
+ const struct ls_expr *const x = (const struct ls_expr *) p;
return hash_rtx (x->pattern, GET_MODE (x->pattern), &do_not_record_p, NULL, false);
}
static int
pre_ldst_expr_eq (const void *p1, const void *p2)
{
- const struct ls_expr *ptr1 = p1, *ptr2 = p2;
+ const struct ls_expr *const ptr1 = (const struct ls_expr *) p1,
+ *const ptr2 = (const struct ls_expr *) p2;
return expr_equiv_p (ptr1->pattern, ptr2->pattern);
}
slot = htab_find_slot (pre_ldst_table, &e, NO_INSERT);
if (!slot || ((struct ls_expr *)*slot)->invalid)
return NULL;
- return *slot;
+ return (struct ls_expr *) *slot;
}
/* Assign each element of the list of mems a monotonically increasing value. */
rtx pat = PATTERN (insn);
rtx src = SET_SRC (pat);
rtx reg = expr->reaching_reg;
- rtx copy, new;
+ rtx copy, new_rtx;
/* If we've already copied it, continue. */
if (expr->reaching_reg == src)
}
copy = gen_move_insn ( reg, copy_rtx (SET_SRC (pat)));
- new = emit_insn_before (copy, insn);
- record_one_set (REGNO (reg), new);
+ new_rtx = emit_insn_before (copy, insn);
+ record_one_set (REGNO (reg), new_rtx);
SET_SRC (pat) = reg;
df_insn_rescan (insn);
reg_set_info (rtx dest, const_rtx setter ATTRIBUTE_UNUSED,
void *data)
{
- sbitmap bb_reg = data;
+ sbitmap bb_reg = (sbitmap) data;
if (GET_CODE (dest) == SUBREG)
dest = SUBREG_REG (dest);
reg_clear_last_set (rtx dest, const_rtx setter ATTRIBUTE_UNUSED,
void *data)
{
- int *dead_vec = data;
+ int *dead_vec = (int *) data;
if (GET_CODE (dest) == SUBREG)
dest = SUBREG_REG (dest);
static void
replace_store_insn (rtx reg, rtx del, basic_block bb, struct ls_expr *smexpr)
{
- rtx insn, mem, note, set, ptr, pair;
+ rtx insn, mem, note, set, ptr;
mem = smexpr->pattern;
insn = gen_move_insn (reg, SET_SRC (single_set (del)));
break;
}
- /* Move the notes from the deleted insn to its replacement, and patch
- up the LIBCALL notes. */
+ /* Move the notes from the deleted insn to its replacement. */
REG_NOTES (insn) = REG_NOTES (del);
- note = find_reg_note (insn, REG_RETVAL, NULL_RTX);
- if (note)
- {
- pair = XEXP (note, 0);
- note = find_reg_note (pair, REG_LIBCALL, NULL_RTX);
- XEXP (note, 0) = insn;
- }
- note = find_reg_note (insn, REG_LIBCALL, NULL_RTX);
- if (note)
- {
- pair = XEXP (note, 0);
- note = find_reg_note (pair, REG_RETVAL, NULL_RTX);
- XEXP (note, 0) = insn;
- }
-
/* Emit the insn AFTER all the notes are transferred.
This is cheaper since we avoid df rescanning for the note change. */
insn = emit_insn_after (insn, del);
max_gcse_regno = max_reg_num ();
alloc_gcse_mem ();
- changed = one_cprop_pass (MAX_GCSE_PASSES + 2, true, true);
+ changed = one_cprop_pass (3, true, true);
free_gcse_mem ();
if (dump_file)
NULL, /* next */
0, /* static_pass_number */
TV_BYPASS, /* tv_id */
- 0, /* properties_required */
+ PROP_cfglayout, /* properties_required */
0, /* properties_provided */
0, /* properties_destroyed */
0, /* todo_flags_start */
NULL, /* next */
0, /* static_pass_number */
TV_GCSE, /* tv_id */
- 0, /* properties_required */
+ PROP_cfglayout, /* properties_required */
0, /* properties_provided */
0, /* properties_destroyed */
0, /* todo_flags_start */
OSDN Git Service
