/* Gcov.c: prepend line execution counts and branch probabilities to a
source file.
- Copyright (C) 1990, 1991, 1992, 1993, 1994, 1996, 1997, 1998,
- 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
+ Copyright (C) 1990, 1991, 1992, 1993, 1994, 1996, 1997, 1998, 1999,
+ 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
+ Free Software Foundation, Inc.
Contributed by James E. Wilson of Cygnus Support.
Mangled by Bob Manson of Cygnus Support.
+ Mangled further by Nathan Sidwell <nathan@codesourcery.com>
Gcov is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
+the Free Software Foundation; either version 3, or (at your option)
any later version.
Gcov is distributed in the hope that it will be useful,
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
-along with Gcov; see the file COPYING. If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA. */
-
-/* ??? The code in final.c that produces the struct bb assumes that there is
- no padding between the fields. This is not necessary true. The current
- code can only be trusted if longs and pointers are the same size. */
-
-/* ??? No need to print an execution count on every line, could just print
- it on the first line of each block, and only print it on a subsequent
- line in the same block if the count changes. */
+along with Gcov; see the file COPYING3. If not see
+<http://www.gnu.org/licenses/>. */
/* ??? Print a list of the ten blocks with the highest execution counts,
and list the line numbers corresponding to those blocks. Also, perhaps
/* ??? Should have an option to print the number of basic blocks, and the
percent of them that are covered. */
-/* ??? Does not correctly handle the case where two .bb files refer to the
- same included source file. For example, if one has a short file containing
- only inline functions, which is then included in two other files, then
- there will be two .bb files which refer to the include file, but there
- is no way to get the total execution counts for the included file, can
- only get execution counts for one or the other of the including files. */
+/* Need an option to show individual block counts, and show
+ probabilities of fall through arcs. */
#include "config.h"
#include "system.h"
+#include "coretypes.h"
+#include "tm.h"
#include "intl.h"
#include "version.h"
-#undef abort
#include <getopt.h>
-typedef HOST_WIDEST_INT gcov_type;
+#define IN_GCOV 1
#include "gcov-io.h"
+#include "gcov-io.c"
-/* The .bb file format consists of several lists of 4-byte integers
- which are the line numbers of each basic block in the file. Each
- list is terminated by a zero. These lists correspond to the basic
- blocks in the reconstructed program flow graph.
-
- A line number of -1 indicates that a source file name (padded to a
- long boundary) follows. The padded file name is followed by
- another -1 to make it easy to scan past file names. A -2 indicates
- that a function name (padded to a long boundary) follows; the name
- is followed by another -2 to make it easy to scan past the function
- name.
-
- The .bbg file contains enough info to enable gcov to reconstruct the
- program flow graph. The first word is the number of basic blocks,
- the second word is the number of arcs, followed by the list of arcs
- (source bb, dest bb pairs), then a -1, then the number of instrumented
- arcs followed by the instrumented arcs, followed by another -1. This
- is repeated for each function.
-
- The .da file contains the execution count for each instrumented branch.
-
- The .bb and .bbg files are created by giving GCC the -ftest-coverage option,
- and the .da files are created when an executable compiled with
- -fprofile-arcs is run. */
+/* The gcno file is generated by -ftest-coverage option. The gcda file is
+ generated by a program compiled with -fprofile-arcs. Their formats
+ are documented in gcov-io.h. */
/* The functions in this file for creating and solution program flow graphs
- are very similar to functions in the gcc source file profile.c. */
+ are very similar to functions in the gcc source file profile.c. In
+ some places we make use of the knowledge of how profile.c works to
+ select particular algorithms here. */
/* This is the size of the buffer used to read in source file lines. */
#define STRING_SIZE 200
-/* One copy of this structure is created for each source file mentioned in the
- .bb file. */
-
-struct sourcefile
-{
- char *name;
- int maxlineno;
- struct sourcefile *next;
-};
+struct function_info;
+struct block_info;
+struct source_info;
-/* This points to the head of the sourcefile structure list. */
+/* Describes an arc between two basic blocks. */
-struct sourcefile *sources;
+typedef struct arc_info
+{
+ /* source and destination blocks. */
+ struct block_info *src;
+ struct block_info *dst;
-/* One of these is dynamically created whenever we identify an arc in the
- function. */
+ /* transition counts. */
+ gcov_type count;
+ /* used in cycle search, so that we do not clobber original counts. */
+ gcov_type cs_count;
-struct adj_list
-{
- int source;
- int target;
- gcov_type arc_count;
unsigned int count_valid : 1;
unsigned int on_tree : 1;
unsigned int fake : 1;
unsigned int fall_through : 1;
-#if 0
- /* Not needed for gcov, but defined in profile.c. */
- rtx branch_insn;
-#endif
- struct adj_list *pred_next;
- struct adj_list *succ_next;
-};
-/* Count the number of basic blocks, and create an array of these structures,
- one for each bb in the function. */
+ /* Arc is for a function that abnormally returns. */
+ unsigned int is_call_non_return : 1;
-struct bb_info
-{
- struct adj_list *succ;
- struct adj_list *pred;
- gcov_type succ_count;
- gcov_type pred_count;
- gcov_type exec_count;
- unsigned int count_valid : 1;
- unsigned int on_tree : 1;
-#if 0
- /* Not needed for gcov, but defined in profile.c. */
- rtx first_insn;
-#endif
-};
+ /* Arc is for catch/setjmp. */
+ unsigned int is_nonlocal_return : 1;
-/* When outputting branch probabilities, one of these structures is created
- for each branch/call. */
+ /* Is an unconditional branch. */
+ unsigned int is_unconditional : 1;
-struct arcdata
-{
- gcov_type hits;
- gcov_type total;
- int call_insn;
- struct arcdata *next;
-};
+ /* Loop making arc. */
+ unsigned int cycle : 1;
+
+ /* Next branch on line. */
+ struct arc_info *line_next;
-/* Used to save the list of bb_graphs, one per function. */
+ /* Links to next arc on src and dst lists. */
+ struct arc_info *succ_next;
+ struct arc_info *pred_next;
+} arc_t;
-struct bb_info_list
+/* Describes a basic block. Contains lists of arcs to successor and
+ predecessor blocks. */
+
+typedef struct block_info
{
- /* Indexed by block number, holds the basic block graph for one function. */
- struct bb_info *bb_graph;
- int num_blocks;
- struct bb_info_list *next;
-};
+ /* Chain of exit and entry arcs. */
+ arc_t *succ;
+ arc_t *pred;
+
+ /* Number of unprocessed exit and entry arcs. */
+ gcov_type num_succ;
+ gcov_type num_pred;
+
+ /* Block execution count. */
+ gcov_type count;
+ unsigned flags : 13;
+ unsigned count_valid : 1;
+ unsigned valid_chain : 1;
+ unsigned invalid_chain : 1;
+
+ /* Block is a call instrumenting site. */
+ unsigned is_call_site : 1; /* Does the call. */
+ unsigned is_call_return : 1; /* Is the return. */
+
+ /* Block is a landing pad for longjmp or throw. */
+ unsigned is_nonlocal_return : 1;
+
+ union
+ {
+ struct
+ {
+ /* Array of line numbers and source files. source files are
+ introduced by a linenumber of zero, the next 'line number' is
+ the number of the source file. Always starts with a source
+ file. */
+ unsigned *encoding;
+ unsigned num;
+ } line; /* Valid until blocks are linked onto lines */
+ struct
+ {
+ /* Single line graph cycle workspace. Used for all-blocks
+ mode. */
+ arc_t *arc;
+ unsigned ident;
+ } cycle; /* Used in all-blocks mode, after blocks are linked onto
+ lines. */
+ } u;
-/* Used to hold information about each line. */
-struct line_info
+ /* Temporary chain for solving graph, and for chaining blocks on one
+ line. */
+ struct block_info *chain;
+
+} block_t;
+
+/* Describes a single function. Contains an array of basic blocks. */
+
+typedef struct function_info
{
- gcov_type count; /* execution count */
- struct arcdata *branches; /* list of branch probabilities for line. */
- unsigned exists : 1; /* has code associated with it. */
-};
-
-struct coverage
+ /* Name of function. */
+ char *name;
+ unsigned ident;
+ unsigned checksum;
+
+ /* Array of basic blocks. */
+ block_t *blocks;
+ unsigned num_blocks;
+ unsigned blocks_executed;
+
+ /* Raw arc coverage counts. */
+ gcov_type *counts;
+ unsigned num_counts;
+
+ /* First line number. */
+ unsigned line;
+ struct source_info *src;
+
+ /* Next function in same source file. */
+ struct function_info *line_next;
+
+ /* Next function. */
+ struct function_info *next;
+} function_t;
+
+/* Describes coverage of a file or function. */
+
+typedef struct coverage_info
{
int lines;
int lines_executed;
-
+
int branches;
int branches_executed;
int branches_taken;
-
+
int calls;
int calls_executed;
-
+
char *name;
-};
+} coverage_t;
+
+/* Describes a single line of source. Contains a chain of basic blocks
+ with code on it. */
+
+typedef struct line_info
+{
+ gcov_type count; /* execution count */
+ union
+ {
+ arc_t *branches; /* branches from blocks that end on this
+ line. Used for branch-counts when not
+ all-blocks mode. */
+ block_t *blocks; /* blocks which start on this line. Used
+ in all-blocks mode. */
+ } u;
+ unsigned exists : 1;
+} line_t;
+
+/* Describes a file mentioned in the block graph. Contains an array
+ of line info. */
+
+typedef struct source_info
+{
+ /* Name of source file. */
+ char *name;
+ unsigned index;
+ time_t file_time;
+
+ /* Array of line information. */
+ line_t *lines;
+ unsigned num_lines;
+
+ coverage_t coverage;
+
+ /* Functions in this source file. These are in ascending line
+ number order. */
+ function_t *functions;
+
+ /* Next source file. */
+ struct source_info *next;
+} source_t;
/* Holds a list of function basic block graphs. */
-static struct bb_info_list *bb_graph_list = 0;
+static function_t *functions;
+
+/* This points to the head of the sourcefile structure list. New elements
+ are always prepended. */
+
+static source_t *sources;
-/* Modification time of data files. */
+/* Next index for a source file. */
-static time_t bb_file_time;
+static unsigned source_index;
+
+/* This holds data summary information. */
+
+static struct gcov_summary object_summary;
+static unsigned program_count;
+
+/* Modification time of graph file. */
+
+static time_t bbg_file_time;
/* Name and file pointer of the input file for the basic block graph. */
static char *bbg_file_name;
-static FILE *bbg_file;
+
+/* Stamp of the bbg file */
+static unsigned bbg_stamp;
/* Name and file pointer of the input file for the arc count data. */
static char *da_file_name;
-static FILE *da_file;
-
-/* Name and file pointer of the input file for the basic block line counts. */
-
-static char *bb_file_name;
-static FILE *bb_file;
-
-/* Holds the entire contents of the bb_file read into memory. */
-static char *bb_data;
+/* Data file is missing. */
-/* Size of bb_data array in longs. */
+static int no_data_file;
-static long bb_data_size;
+/* If there is several input files, compute and display results after
+ reading all data files. This way if two or more gcda file refer to
+ the same source file (eg inline subprograms in a .h file), the
+ counts are added. */
-/* Name of the file mentioned on the command line. */
+static int multiple_files = 0;
-static char *input_file_name = 0;
+/* Output branch probabilities. */
-/* Output branch probabilities if true. */
+static int flag_branches = 0;
-static int output_branch_probs = 0;
+/* Show unconditional branches too. */
+static int flag_unconditional = 0;
/* Output a gcov file if this is true. This is on by default, and can
be turned off by the -n option. */
-static int output_gcov_file = 1;
+static int flag_gcov_file = 1;
-/* For included files, make the gcov output file name include the name of
- the input source file. For example, if x.h is included in a.c, then the
- output file name is a.c.x.h.gcov instead of x.h.gcov. This works only
- when a single source file is specified. */
+/* For included files, make the gcov output file name include the name
+ of the input source file. For example, if x.h is included in a.c,
+ then the output file name is a.c##x.h.gcov instead of x.h.gcov. */
-static int output_long_names = 0;
+static int flag_long_names = 0;
+
+/* Output count information for every basic block, not merely those
+ that contain line number information. */
+
+static int flag_all_blocks = 0;
/* Output summary info for each function. */
-static int output_function_summary = 0;
+static int flag_function_summary = 0;
-/* Object directory file prefix. This is the directory/file
- where .bb and .bbg files are looked for, if non-zero. */
+/* Object directory file prefix. This is the directory/file where the
+ graph and data files are looked for, if nonzero. */
static char *object_directory = 0;
/* Preserve all pathname components. Needed when object files and
- source files are in subdirectories. */
-static int preserve_paths = 0;
+ source files are in subdirectories. '/' is mangled as '#', '.' is
+ elided and '..' mangled to '^'. */
+
+static int flag_preserve_paths = 0;
/* Output the number of times a branch was taken as opposed to the percentage
- of times it was taken. Turned on by the -c option */
+ of times it was taken. */
-static int output_branch_counts = 0;
+static int flag_counts = 0;
/* Forward declarations. */
-static void process_args PARAMS ((int, char **));
-static void open_files PARAMS ((void));
-static void read_files PARAMS ((void));
-static void scan_for_source_files PARAMS ((void));
-static void output_data PARAMS ((struct sourcefile *));
-static void print_usage PARAMS ((int)) ATTRIBUTE_NORETURN;
-static void print_version PARAMS ((void)) ATTRIBUTE_NORETURN;
-static void init_arc PARAMS ((struct adj_list *, int, int, struct bb_info *));
-static struct adj_list *reverse_arcs PARAMS ((struct adj_list *));
-static gcov_type *read_profile PARAMS ((char *, long, int));
-static void create_program_flow_graph PARAMS ((struct bb_info_list *));
-static void solve_program_flow_graph PARAMS ((struct bb_info_list *));
-static void accumulate_branch_counts PARAMS ((struct coverage *,
- struct arcdata *));
-static void calculate_branch_probs PARAMS ((struct bb_info *,
- struct line_info *,
- struct coverage *));
-static void function_summary PARAMS ((struct coverage *, const char *));
-static void init_line_info PARAMS ((struct line_info *,
- struct coverage *, long));
-static void output_line_info PARAMS ((FILE *, const struct line_info *,
- const struct coverage *, long));
-static char *make_gcov_file_name PARAMS ((char *));
-static const char *format_hwint PARAMS ((HOST_WIDEST_INT, HOST_WIDEST_INT,
- int));
-
-extern int main PARAMS ((int, char **));
+static void fnotice (FILE *, const char *, ...) ATTRIBUTE_PRINTF_2;
+static int process_args (int, char **);
+static void print_usage (int) ATTRIBUTE_NORETURN;
+static void print_version (void) ATTRIBUTE_NORETURN;
+static void process_file (const char *);
+static void generate_results (const char *);
+static void create_file_names (const char *);
+static source_t *find_source (const char *);
+static int read_graph_file (void);
+static int read_count_file (void);
+static void solve_flow_graph (function_t *);
+static void add_branch_counts (coverage_t *, const arc_t *);
+static void add_line_counts (coverage_t *, function_t *);
+static void function_summary (const coverage_t *, const char *);
+static const char *format_gcov (gcov_type, gcov_type, int);
+static void accumulate_line_counts (source_t *);
+static int output_branch_count (FILE *, int, const arc_t *);
+static void output_lines (FILE *, const source_t *);
+static char *make_gcov_file_name (const char *, const char *);
+static void release_structures (void);
+extern int main (int, char **);
int
-main (argc, argv)
- int argc;
- char **argv;
+main (int argc, char **argv)
{
- struct sourcefile *s_ptr;
-
+ int argno;
+
+ /* Unlock the stdio streams. */
+ unlock_std_streams ();
+
gcc_init_libintl ();
- process_args (argc, argv);
+ /* Handle response files. */
+ expandargv (&argc, &argv);
+
+ argno = process_args (argc, argv);
+ if (optind == argc)
+ print_usage (true);
- open_files ();
+ if (argc - argno > 1)
+ multiple_files = 1;
- read_files ();
+ for (; argno != argc; argno++)
+ process_file (argv[argno]);
- scan_for_source_files ();
+ generate_results (multiple_files ? NULL : argv[argc - 1]);
- for (s_ptr = sources; s_ptr; s_ptr = s_ptr->next)
- output_data (s_ptr);
+ release_structures ();
return 0;
}
-static void fnotice PARAMS ((FILE *, const char *, ...)) ATTRIBUTE_PRINTF_2;
static void
-fnotice VPARAMS ((FILE *file, const char *msgid, ...))
+fnotice (FILE *file, const char *cmsgid, ...)
{
- VA_OPEN (ap, msgid);
- VA_FIXEDARG (ap, FILE *, file);
- VA_FIXEDARG (ap, const char *, msgid);
+ va_list ap;
- vfprintf (file, _(msgid), ap);
- VA_CLOSE (ap);
-}
-
-/* More 'friendly' abort that prints the line and file.
- config.h can #define abort fancy_abort if you like that sort of thing. */
-extern void fancy_abort PARAMS ((void)) ATTRIBUTE_NORETURN;
-
-void
-fancy_abort ()
-{
- fnotice (stderr, "Internal gcov abort.\n");
- exit (FATAL_EXIT_CODE);
+ va_start (ap, cmsgid);
+ vfprintf (file, _(cmsgid), ap);
+ va_end (ap);
}
\f
/* Print a usage message and exit. If ERROR_P is nonzero, this is an error,
otherwise the output of --help. */
static void
-print_usage (error_p)
- int error_p;
+print_usage (int error_p)
{
FILE *file = error_p ? stderr : stdout;
int status = error_p ? FATAL_EXIT_CODE : SUCCESS_EXIT_CODE;
- fnotice (file, "Usage: gcov [OPTION]... SOURCEFILE\n\n");
+
+ fnotice (file, "Usage: gcov [OPTION]... SOURCEFILE...\n\n");
fnotice (file, "Print code coverage information.\n\n");
fnotice (file, " -h, --help Print this help, then exit\n");
fnotice (file, " -v, --version Print version number, then exit\n");
+ fnotice (file, " -a, --all-blocks Show information for every basic block\n");
fnotice (file, " -b, --branch-probabilities Include branch probabilities in output\n");
fnotice (file, " -c, --branch-counts Given counts of branches taken\n\
rather than percentages\n");
fnotice (file, " -f, --function-summaries Output summaries for each function\n");
fnotice (file, " -o, --object-directory DIR|FILE Search for object files in DIR or called FILE\n");
fnotice (file, " -p, --preserve-paths Preserve all pathname components\n");
+ fnotice (file, " -u, --unconditional-branches Show unconditional branch counts too\n");
fnotice (file, "\nFor bug reporting instructions, please see:\n%s.\n",
- GCCBUGURL);
+ bug_report_url);
exit (status);
}
/* Print version information and exit. */
static void
-print_version ()
+print_version (void)
{
- fnotice (stdout, "gcov (GCC) %s\n", version_string);
- fnotice (stdout, "Copyright (C) 2001 Free Software Foundation, Inc.\n");
+ fnotice (stdout, "gcov %s%s\n", pkgversion_string, version_string);
+ fprintf (stdout, "Copyright %s 2008 Free Software Foundation, Inc.\n",
+ _("(C)"));
fnotice (stdout,
- "This is free software; see the source for copying conditions. There is NO\n\
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.\n\n");
+ _("This is free software; see the source for copying conditions.\n"
+ "There is NO warranty; not even for MERCHANTABILITY or \n"
+ "FITNESS FOR A PARTICULAR PURPOSE.\n\n"));
exit (SUCCESS_EXIT_CODE);
}
{
{ "help", no_argument, NULL, 'h' },
{ "version", no_argument, NULL, 'v' },
+ { "all-blocks", no_argument, NULL, 'a' },
{ "branch-probabilities", no_argument, NULL, 'b' },
{ "branch-counts", no_argument, NULL, 'c' },
{ "no-output", no_argument, NULL, 'n' },
{ "preserve-paths", no_argument, NULL, 'p' },
{ "object-directory", required_argument, NULL, 'o' },
{ "object-file", required_argument, NULL, 'o' },
+ { "unconditional-branches", no_argument, NULL, 'u' },
+ { 0, 0, 0, 0 }
};
-/* Parse the command line. */
+/* Process args, return index to first non-arg. */
-static void
-process_args (argc, argv)
- int argc;
- char **argv;
+static int
+process_args (int argc, char **argv)
{
int opt;
- while ((opt = getopt_long (argc, argv, "hvbclnfo:p", options, NULL)) != -1)
+ while ((opt = getopt_long (argc, argv, "abcfhlno:puv", options, NULL)) != -1)
{
switch (opt)
{
- case 'h':
- print_usage (false);
- /* print_usage will exit. */
- case 'v':
- print_version ();
- /* print_version will exit. */
+ case 'a':
+ flag_all_blocks = 1;
+ break;
case 'b':
- output_branch_probs = 1;
+ flag_branches = 1;
break;
case 'c':
- output_branch_counts = 1;
+ flag_counts = 1;
break;
- case 'n':
- output_gcov_file = 0;
+ case 'f':
+ flag_function_summary = 1;
break;
+ case 'h':
+ print_usage (false);
+ /* print_usage will exit. */
case 'l':
- output_long_names = 1;
+ flag_long_names = 1;
break;
- case 'f':
- output_function_summary = 1;
+ case 'n':
+ flag_gcov_file = 0;
break;
case 'o':
object_directory = optarg;
break;
case 'p':
- preserve_paths = 1;
+ flag_preserve_paths = 1;
break;
+ case 'u':
+ flag_unconditional = 1;
+ break;
+ case 'v':
+ print_version ();
+ /* print_version will exit. */
default:
print_usage (true);
/* print_usage will exit. */
}
}
- if (optind != argc - 1)
- print_usage (true);
+ return optind;
+}
+
+/* Process a single source file. */
+
+static void
+process_file (const char *file_name)
+{
+ function_t *fn;
+ function_t *fn_p;
+ function_t *old_functions;
+
+ /* Save and clear the list of current functions. They will be appended
+ later. */
+ old_functions = functions;
+ functions = NULL;
+
+ create_file_names (file_name);
+ if (read_graph_file ())
+ return;
+
+ if (!functions)
+ {
+ fnotice (stderr, "%s:no functions found\n", bbg_file_name);
+ return;
+ }
+
+ if (read_count_file ())
+ return;
+
+ for (fn_p = NULL, fn = functions; fn; fn_p = fn, fn = fn->next)
+ solve_flow_graph (fn);
+
+ if (fn_p)
+ fn_p->next = old_functions;
+}
+
+static void
+generate_results (const char *file_name)
+{
+ source_t *src;
+ function_t *fn;
+
+ for (src = sources; src; src = src->next)
+ src->lines = XCNEWVEC (line_t, src->num_lines);
+ for (fn = functions; fn; fn = fn->next)
+ {
+ coverage_t coverage;
+
+ memset (&coverage, 0, sizeof (coverage));
+ coverage.name = fn->name;
+ add_line_counts (flag_function_summary ? &coverage : NULL, fn);
+ if (flag_function_summary)
+ {
+ function_summary (&coverage, "Function");
+ fnotice (stdout, "\n");
+ }
+ }
- input_file_name = argv[optind];
+ for (src = sources; src; src = src->next)
+ {
+ accumulate_line_counts (src);
+ function_summary (&src->coverage, "File");
+ if (flag_gcov_file)
+ {
+ char *gcov_file_name = make_gcov_file_name (file_name, src->name);
+ FILE *gcov_file = fopen (gcov_file_name, "w");
+
+ if (gcov_file)
+ {
+ fnotice (stdout, "%s:creating '%s'\n",
+ src->name, gcov_file_name);
+ output_lines (gcov_file, src);
+ if (ferror (gcov_file))
+ fnotice (stderr, "%s:error writing output file '%s'\n",
+ src->name, gcov_file_name);
+ fclose (gcov_file);
+ }
+ else
+ fnotice (stderr, "%s:could not open output file '%s'\n",
+ src->name, gcov_file_name);
+ free (gcov_file_name);
+ }
+ fnotice (stdout, "\n");
+ }
}
+/* Release all memory used. */
+
+static void
+release_structures (void)
+{
+ function_t *fn;
+ source_t *src;
+
+ while ((src = sources))
+ {
+ sources = src->next;
+
+ free (src->name);
+ free (src->lines);
+ }
+
+ while ((fn = functions))
+ {
+ unsigned ix;
+ block_t *block;
+
+ functions = fn->next;
+ for (ix = fn->num_blocks, block = fn->blocks; ix--; block++)
+ {
+ arc_t *arc, *arc_n;
+
+ for (arc = block->succ; arc; arc = arc_n)
+ {
+ arc_n = arc->succ_next;
+ free (arc);
+ }
+ }
+ free (fn->blocks);
+ free (fn->counts);
+ }
+}
-/* Find and open the .bb, .da, and .bbg files. If OBJECT_DIRECTORY is
- not specified, these are looked for in the current directory, and
- named from the basename of the input_file_name sans extension. If
+/* Generate the names of the graph and data files. If OBJECT_DIRECTORY
+ is not specified, these are looked for in the current directory,
+ and named from the basename of the FILE_NAME sans extension. If
OBJECT_DIRECTORY is specified and is a directory, the files are in
- that directory, but named from the basename of the input_file_name,
- sans extension. Otherwise OBJECT_DIRECTORY is taken to be the name
- of the object *file*, and the data files are named from that. */
+ that directory, but named from the basename of the FILE_NAME, sans
+ extension. Otherwise OBJECT_DIRECTORY is taken to be the name of
+ the object *file*, and the data files are named from that. */
static void
-open_files ()
+create_file_names (const char *file_name)
{
char *cptr;
char *name;
- int length = strlen (input_file_name);
+ int length = strlen (file_name);
int base;
-
+
+ /* Free previous file names. */
+ if (bbg_file_name)
+ free (bbg_file_name);
+ if (da_file_name)
+ free (da_file_name);
+ da_file_name = bbg_file_name = NULL;
+ bbg_file_time = 0;
+ bbg_stamp = 0;
+
if (object_directory && object_directory[0])
{
struct stat status;
length += strlen (object_directory) + 2;
- name = xmalloc (length);
+ name = XNEWVEC (char, length);
name[0] = 0;
-
+
base = !stat (object_directory, &status) && S_ISDIR (status.st_mode);
strcat (name, object_directory);
- if (base && name[strlen (name) - 1] != '/')
+ if (base && (! IS_DIR_SEPARATOR (name[strlen (name) - 1])))
strcat (name, "/");
}
else
{
- name = xmalloc (length + 1);
+ name = XNEWVEC (char, length + 1);
name[0] = 0;
base = 1;
}
-
+
if (base)
{
- /* Append source file name */
- cptr = strrchr (input_file_name, '/');
- cptr = cptr ? cptr + 1 : input_file_name;
-
- strcat (name, cptr);
+ /* Append source file name. */
+ const char *cptr = lbasename (file_name);
+ strcat (name, cptr ? cptr : file_name);
}
- /* Remove the extension. */
+
+ /* Remove the extension. */
cptr = strrchr (name, '.');
if (cptr)
*cptr = 0;
-
+
length = strlen (name);
- da_file_name = xmalloc (length + 4);
- bb_file_name = xmalloc (length + 4);
- bbg_file_name = xmalloc (length + 5);
+
+ bbg_file_name = XNEWVEC (char, length + strlen (GCOV_NOTE_SUFFIX) + 1);
+ strcpy (bbg_file_name, name);
+ strcpy (bbg_file_name + length, GCOV_NOTE_SUFFIX);
+ da_file_name = XNEWVEC (char, length + strlen (GCOV_DATA_SUFFIX) + 1);
strcpy (da_file_name, name);
- strcpy (bb_file_name, name);
- strcpy (bbg_file_name, name);
- strcpy (da_file_name + length, ".da");
- strcpy (bb_file_name + length, ".bb");
- strcpy (bbg_file_name + length, ".bbg");
+ strcpy (da_file_name + length, GCOV_DATA_SUFFIX);
- bb_file = fopen (bb_file_name, "rb");
- if (bb_file == NULL)
- {
- fnotice (stderr, "Could not open basic block file %s.\n", bb_file_name);
- exit (FATAL_EXIT_CODE);
- }
+ free (name);
+ return;
+}
- bbg_file = fopen (bbg_file_name, "rb");
- if (bbg_file == NULL)
- {
- fnotice (stderr, "Could not open program flow graph file %s.\n",
- bbg_file_name);
- exit (FATAL_EXIT_CODE);
- }
-
- {
- struct stat status;
+/* Find or create a source file structure for FILE_NAME. Copies
+ FILE_NAME on creation */
- if (!fstat (fileno (bb_file), &status))
- bb_file_time = status.st_mtime;
- }
-
- /* If none of the functions in the file were executed, then there won't
- be a .da file. Just assume that all counts are zero in this case. */
- da_file = fopen (da_file_name, "rb");
- if (da_file == NULL)
+static source_t *
+find_source (const char *file_name)
+{
+ source_t *src;
+ struct stat status;
+
+ if (!file_name)
+ file_name = "<unknown>";
+
+ for (src = sources; src; src = src->next)
+ if (!strcmp (file_name, src->name))
+ break;
+
+ if (!src)
{
- fnotice (stderr, "Could not open data file %s.\n", da_file_name);
- fnotice (stderr, "Assuming that all execution counts are zero.\n");
+ src = XCNEW (source_t);
+ src->name = xstrdup (file_name);
+ src->coverage.name = src->name;
+ src->index = source_index++;
+ src->next = sources;
+ sources = src;
+
+ if (!stat (file_name, &status))
+ src->file_time = status.st_mtime;
}
- /* Check for empty .bbg file. This indicates that there is no executable
- code in this source file. */
- /* Set the EOF condition if at the end of file. */
- ungetc (getc (bbg_file), bbg_file);
- if (feof (bbg_file))
+ if (src->file_time > bbg_file_time)
{
- fnotice (stderr, "No executable code associated with file %s.\n",
- input_file_name);
- exit (FATAL_EXIT_CODE);
+ static int info_emitted;
+
+ fnotice (stderr, "%s:source file is newer than graph file '%s'\n",
+ src->name, bbg_file_name);
+ if (!info_emitted)
+ {
+ fnotice (stderr,
+ "(the message is only displayed one per source file)\n");
+ info_emitted = 1;
+ }
+ src->file_time = 0;
}
-}
-\f
-/* Initialize a new arc. */
-static void
-init_arc (arcptr, source, target, bb_graph)
- struct adj_list *arcptr;
- int source, target;
- struct bb_info *bb_graph;
-{
- arcptr->target = target;
- arcptr->source = source;
-
- arcptr->arc_count = 0;
- arcptr->count_valid = 0;
- arcptr->on_tree = 0;
- arcptr->fake = 0;
- arcptr->fall_through = 0;
-
- arcptr->succ_next = bb_graph[source].succ;
- bb_graph[source].succ = arcptr;
- bb_graph[source].succ_count++;
-
- arcptr->pred_next = bb_graph[target].pred;
- bb_graph[target].pred = arcptr;
- bb_graph[target].pred_count++;
+ return src;
}
-/* Reverse the arcs on an arc list. */
+/* Read the graph file. Return nonzero on fatal error. */
-static struct adj_list *
-reverse_arcs (arcptr)
- struct adj_list *arcptr;
+static int
+read_graph_file (void)
{
- struct adj_list *prev = 0;
- struct adj_list *next;
-
- for ( ; arcptr; arcptr = next)
+ unsigned version;
+ unsigned current_tag = 0;
+ struct function_info *fn = NULL;
+ function_t *old_functions_head = functions;
+ source_t *src = NULL;
+ unsigned ix;
+ unsigned tag;
+
+ if (!gcov_open (bbg_file_name, 1))
{
- next = arcptr->succ_next;
- arcptr->succ_next = prev;
- prev = arcptr;
+ fnotice (stderr, "%s:cannot open graph file\n", bbg_file_name);
+ return 1;
+ }
+ bbg_file_time = gcov_time ();
+ if (!gcov_magic (gcov_read_unsigned (), GCOV_NOTE_MAGIC))
+ {
+ fnotice (stderr, "%s:not a gcov graph file\n", bbg_file_name);
+ gcov_close ();
+ return 1;
}
- return prev;
-}
-
-/* Reads profiles from the .da file and compute a hybrid profile. */
-
-static gcov_type *
-read_profile (function_name, cfg_checksum, instr_arcs)
- char *function_name;
- long cfg_checksum;
- int instr_arcs;
-{
- int i;
- int okay = 1;
- gcov_type *profile;
- char *function_name_buffer;
- int function_name_buffer_len;
-
- profile = xmalloc (sizeof (gcov_type) * instr_arcs);
- function_name_buffer_len = strlen (function_name) + 1;
- function_name_buffer = xmalloc (function_name_buffer_len + 1);
+ version = gcov_read_unsigned ();
+ if (version != GCOV_VERSION)
+ {
+ char v[4], e[4];
- for (i = 0; i < instr_arcs; i++)
- profile[i] = 0;
+ GCOV_UNSIGNED2STRING (v, version);
+ GCOV_UNSIGNED2STRING (e, GCOV_VERSION);
- if (!da_file)
- return profile;
+ fnotice (stderr, "%s:version '%.4s', prefer '%.4s'\n",
+ bbg_file_name, v, e);
+ }
+ bbg_stamp = gcov_read_unsigned ();
- rewind (da_file);
- while (1)
+ while ((tag = gcov_read_unsigned ()))
{
- long magic, extra_bytes;
- long func_count;
- int i;
-
- if (__read_long (&magic, da_file, 4) != 0)
- break;
+ unsigned length = gcov_read_unsigned ();
+ gcov_position_t base = gcov_position ();
- if (magic != -123)
+ if (tag == GCOV_TAG_FUNCTION)
{
- okay = 0;
- break;
+ char *function_name;
+ unsigned ident, checksum, lineno;
+ source_t *src;
+ function_t *probe, *prev;
+
+ ident = gcov_read_unsigned ();
+ checksum = gcov_read_unsigned ();
+ function_name = xstrdup (gcov_read_string ());
+ src = find_source (gcov_read_string ());
+ lineno = gcov_read_unsigned ();
+
+ fn = XCNEW (function_t);
+ fn->name = function_name;
+ fn->ident = ident;
+ fn->checksum = checksum;
+ fn->src = src;
+ fn->line = lineno;
+
+ fn->next = functions;
+ functions = fn;
+ current_tag = tag;
+
+ if (lineno >= src->num_lines)
+ src->num_lines = lineno + 1;
+ /* Now insert it into the source file's list of
+ functions. Normally functions will be encountered in
+ ascending order, so a simple scan is quick. */
+ for (probe = src->functions, prev = NULL;
+ probe && probe->line > lineno;
+ prev = probe, probe = probe->line_next)
+ continue;
+ fn->line_next = probe;
+ if (prev)
+ prev->line_next = fn;
+ else
+ src->functions = fn;
}
-
- if (__read_long (&func_count, da_file, 4) != 0)
+ else if (fn && tag == GCOV_TAG_BLOCKS)
{
- okay = 0;
- break;
- }
+ if (fn->blocks)
+ fnotice (stderr, "%s:already seen blocks for '%s'\n",
+ bbg_file_name, fn->name);
+ else
+ {
+ unsigned ix, num_blocks = GCOV_TAG_BLOCKS_NUM (length);
+ fn->num_blocks = num_blocks;
- if (__read_long (&extra_bytes, da_file, 4) != 0)
- {
- okay = 0;
- break;
+ fn->blocks = XCNEWVEC (block_t, fn->num_blocks);
+ for (ix = 0; ix != num_blocks; ix++)
+ fn->blocks[ix].flags = gcov_read_unsigned ();
+ }
}
-
- /* skip extra data emited by __bb_exit_func. */
- fseek (da_file, extra_bytes, SEEK_CUR);
-
- for (i = 0; i < func_count; i++)
+ else if (fn && tag == GCOV_TAG_ARCS)
{
- long arc_count;
- long chksum;
- int j;
+ unsigned src = gcov_read_unsigned ();
+ unsigned num_dests = GCOV_TAG_ARCS_NUM (length);
- if (__read_gcov_string
- (function_name_buffer, function_name_buffer_len, da_file,
- -1) != 0)
- {
- okay = 0;
- break;
- }
+ if (src >= fn->num_blocks || fn->blocks[src].succ)
+ goto corrupt;
- if (__read_long (&chksum, da_file, 4) != 0)
+ while (num_dests--)
{
- okay = 0;
- break;
- }
+ struct arc_info *arc;
+ unsigned dest = gcov_read_unsigned ();
+ unsigned flags = gcov_read_unsigned ();
- if (__read_long (&arc_count, da_file, 4) != 0)
- {
- okay = 0;
- break;
- }
+ if (dest >= fn->num_blocks)
+ goto corrupt;
+ arc = XCNEW (arc_t);
- if (strcmp (function_name_buffer, function_name) != 0
- || arc_count != instr_arcs || chksum != cfg_checksum)
- {
- /* skip */
- if (fseek (da_file, arc_count * 8, SEEK_CUR) < 0)
+ arc->dst = &fn->blocks[dest];
+ arc->src = &fn->blocks[src];
+
+ arc->count = 0;
+ arc->count_valid = 0;
+ arc->on_tree = !!(flags & GCOV_ARC_ON_TREE);
+ arc->fake = !!(flags & GCOV_ARC_FAKE);
+ arc->fall_through = !!(flags & GCOV_ARC_FALLTHROUGH);
+
+ arc->succ_next = fn->blocks[src].succ;
+ fn->blocks[src].succ = arc;
+ fn->blocks[src].num_succ++;
+
+ arc->pred_next = fn->blocks[dest].pred;
+ fn->blocks[dest].pred = arc;
+ fn->blocks[dest].num_pred++;
+
+ if (arc->fake)
{
- okay = 0;
- break;
+ if (src)
+ {
+ /* Exceptional exit from this function, the
+ source block must be a call. */
+ fn->blocks[src].is_call_site = 1;
+ arc->is_call_non_return = 1;
+ }
+ else
+ {
+ /* Non-local return from a callee of this
+ function. The destination block is a catch or
+ setjmp. */
+ arc->is_nonlocal_return = 1;
+ fn->blocks[dest].is_nonlocal_return = 1;
+ }
}
- }
- else
- {
- gcov_type tmp;
- for (j = 0; j < arc_count; j++)
- if (__read_gcov_type (&tmp, da_file, 8) != 0)
- {
- okay = 0;
- break;
- }
- else
- {
- profile[j] += tmp;
- }
+ if (!arc->on_tree)
+ fn->num_counts++;
}
}
+ else if (fn && tag == GCOV_TAG_LINES)
+ {
+ unsigned blockno = gcov_read_unsigned ();
+ unsigned *line_nos = XCNEWVEC (unsigned, length - 1);
- if (!okay)
- break;
+ if (blockno >= fn->num_blocks || fn->blocks[blockno].u.line.encoding)
+ goto corrupt;
- }
+ for (ix = 0; ; )
+ {
+ unsigned lineno = gcov_read_unsigned ();
+
+ if (lineno)
+ {
+ if (!ix)
+ {
+ line_nos[ix++] = 0;
+ line_nos[ix++] = src->index;
+ }
+ line_nos[ix++] = lineno;
+ if (lineno >= src->num_lines)
+ src->num_lines = lineno + 1;
+ }
+ else
+ {
+ const char *file_name = gcov_read_string ();
+
+ if (!file_name)
+ break;
+ src = find_source (file_name);
- free (function_name_buffer);
+ line_nos[ix++] = 0;
+ line_nos[ix++] = src->index;
+ }
+ }
- if (!okay)
- {
- fprintf (stderr, ".da file corrupted!\n");
- free (profile);
- abort ();
+ fn->blocks[blockno].u.line.encoding = line_nos;
+ fn->blocks[blockno].u.line.num = ix;
+ }
+ else if (current_tag && !GCOV_TAG_IS_SUBTAG (current_tag, tag))
+ {
+ fn = NULL;
+ current_tag = 0;
+ }
+ gcov_sync (base, length);
+ if (gcov_is_error ())
+ {
+ corrupt:;
+ fnotice (stderr, "%s:corrupted\n", bbg_file_name);
+ gcov_close ();
+ return 1;
+ }
}
+ gcov_close ();
- return profile;
-}
+ /* We built everything backwards, so nreverse them all. */
-/* Construct the program flow graph from the .bbg file, and read in the data
- in the .da file. */
+ /* Reverse sources. Not strictly necessary, but we'll then process
+ them in the 'expected' order. */
+ {
+ source_t *src, *src_p, *src_n;
+
+ for (src_p = NULL, src = sources; src; src_p = src, src = src_n)
+ {
+ src_n = src->next;
+ src->next = src_p;
+ }
+ sources = src_p;
+ }
-static void
-create_program_flow_graph (bptr)
- struct bb_info_list *bptr;
-{
- long num_blocks, number_arcs, src, dest, flag_bits, num_arcs_per_block;
- int i;
- struct adj_list *arcptr;
- struct bb_info *bb_graph;
- long cfg_checksum;
- long instr_arcs = 0;
- gcov_type *profile;
- int profile_pos = 0;
- char *function_name;
- long function_name_len, tmp;
-
- /* Read function name. */
- __read_long (&tmp, bbg_file, 4); /* ignore -1. */
- __read_long (&function_name_len, bbg_file, 4);
- function_name = xmalloc (function_name_len + 1);
- fread (function_name, 1, function_name_len + 1, bbg_file);
-
- /* Skip padding. */
- tmp = (function_name_len + 1) % 4;
-
- if (tmp)
- fseek (bbg_file, 4 - tmp, SEEK_CUR);
-
- __read_long (&tmp, bbg_file, 4); /* ignore -1. */
-
- /* Read the cfg checksum. */
- __read_long (&cfg_checksum, bbg_file, 4);
-
- /* Read the number of blocks. */
- __read_long (&num_blocks, bbg_file, 4);
-
- /* Create an array of size bb number of bb_info structs. */
- bb_graph = (struct bb_info *) xcalloc (num_blocks, sizeof (struct bb_info));
-
- bptr->bb_graph = bb_graph;
- bptr->num_blocks = num_blocks;
-
- /* Read and create each arc from the .bbg file. */
- __read_long (&number_arcs, bbg_file, 4);
- for (i = 0; i < num_blocks; i++)
- {
- int j;
-
- __read_long (&num_arcs_per_block, bbg_file, 4);
- for (j = 0; j < num_arcs_per_block; j++)
- {
- if (number_arcs-- < 0)
- abort ();
-
- src = i;
- __read_long (&dest, bbg_file, 4);
-
- arcptr = (struct adj_list *) xmalloc (sizeof (struct adj_list));
- init_arc (arcptr, src, dest, bb_graph);
-
- __read_long (&flag_bits, bbg_file, 4);
- if (flag_bits & 0x1)
- arcptr->on_tree++;
- else
- instr_arcs++;
- arcptr->fake = !! (flag_bits & 0x2);
- arcptr->fall_through = !! (flag_bits & 0x4);
- }
- }
-
- if (number_arcs)
- abort ();
-
- /* Read and ignore the -1 separating the arc list from the arc list of the
- next function. */
- __read_long (&src, bbg_file, 4);
- if (src != -1)
- abort ();
-
- /* Must reverse the order of all succ arcs, to ensure that they match
- the order of the data in the .da file. */
-
- for (i = 0; i < num_blocks; i++)
- if (bb_graph[i].succ)
- bb_graph[i].succ = reverse_arcs (bb_graph[i].succ);
+ /* Reverse functions. */
+ {
+ function_t *fn, *fn_p, *fn_n;
- /* Read profile from the .da file. */
+ for (fn_p = old_functions_head, fn = functions;
+ fn != old_functions_head;
+ fn_p = fn, fn = fn_n)
+ {
+ unsigned ix;
- profile = read_profile (function_name, cfg_checksum, instr_arcs);
+ fn_n = fn->next;
+ fn->next = fn_p;
- /* For each arc not on the spanning tree, set its execution count from
- the .da file. */
+ /* Reverse the arcs. */
+ for (ix = fn->num_blocks; ix--;)
+ {
+ arc_t *arc, *arc_p, *arc_n;
+
+ for (arc_p = NULL, arc = fn->blocks[ix].succ; arc;
+ arc_p = arc, arc = arc_n)
+ {
+ arc_n = arc->succ_next;
+ arc->succ_next = arc_p;
+ }
+ fn->blocks[ix].succ = arc_p;
+
+ for (arc_p = NULL, arc = fn->blocks[ix].pred; arc;
+ arc_p = arc, arc = arc_n)
+ {
+ arc_n = arc->pred_next;
+ arc->pred_next = arc_p;
+ }
+ fn->blocks[ix].pred = arc_p;
+ }
+ }
+ functions = fn_p;
+ }
+ return 0;
+}
- /* The first count in the .da file is the number of times that the function
- was entered. This is the exec_count for block zero. */
+/* Reads profiles from the count file and attach to each
+ function. Return nonzero if fatal error. */
- /* This duplicates code in branch_prob in profile.c. */
+static int
+read_count_file (void)
+{
+ unsigned ix;
+ unsigned version;
+ unsigned tag;
+ function_t *fn = NULL;
+ int error = 0;
- for (i = 0; i < num_blocks; i++)
- for (arcptr = bb_graph[i].succ; arcptr; arcptr = arcptr->succ_next)
- if (! arcptr->on_tree)
- {
- arcptr->arc_count = profile[profile_pos++];
- arcptr->count_valid = 1;
- bb_graph[i].succ_count--;
- bb_graph[arcptr->target].pred_count--;
- }
- free (profile);
- free (function_name);
-}
+ if (!gcov_open (da_file_name, 1))
+ {
+ fnotice (stderr, "%s:cannot open data file, assuming not executed\n",
+ da_file_name);
+ no_data_file = 1;
+ return 0;
+ }
+ if (!gcov_magic (gcov_read_unsigned (), GCOV_DATA_MAGIC))
+ {
+ fnotice (stderr, "%s:not a gcov data file\n", da_file_name);
+ cleanup:;
+ gcov_close ();
+ return 1;
+ }
+ version = gcov_read_unsigned ();
+ if (version != GCOV_VERSION)
+ {
+ char v[4], e[4];
-static void
-solve_program_flow_graph (bptr)
- struct bb_info_list *bptr;
-{
- int passes, changes;
- gcov_type total;
- int i;
- struct adj_list *arcptr;
- struct bb_info *bb_graph;
- int num_blocks;
-
- num_blocks = bptr->num_blocks;
- bb_graph = bptr->bb_graph;
-
- /* For every block in the file,
- - if every exit/entrance arc has a known count, then set the block count
- - if the block count is known, and every exit/entrance arc but one has
- a known execution count, then set the count of the remaining arc
-
- As arc counts are set, decrement the succ/pred count, but don't delete
- the arc, that way we can easily tell when all arcs are known, or only
- one arc is unknown. */
-
- /* The order that the basic blocks are iterated through is important.
- Since the code that finds spanning trees starts with block 0, low numbered
- arcs are put on the spanning tree in preference to high numbered arcs.
- Hence, most instrumented arcs are at the end. Graph solving works much
- faster if we propagate numbers from the end to the start.
-
- This takes an average of slightly more than 3 passes. */
-
- changes = 1;
- passes = 0;
- while (changes)
+ GCOV_UNSIGNED2STRING (v, version);
+ GCOV_UNSIGNED2STRING (e, GCOV_VERSION);
+
+ fnotice (stderr, "%s:version '%.4s', prefer version '%.4s'\n",
+ da_file_name, v, e);
+ }
+ tag = gcov_read_unsigned ();
+ if (tag != bbg_stamp)
{
- passes++;
- changes = 0;
+ fnotice (stderr, "%s:stamp mismatch with graph file\n", da_file_name);
+ goto cleanup;
+ }
- for (i = num_blocks - 1; i >= 0; i--)
+ while ((tag = gcov_read_unsigned ()))
+ {
+ unsigned length = gcov_read_unsigned ();
+ unsigned long base = gcov_position ();
+
+ if (tag == GCOV_TAG_OBJECT_SUMMARY)
+ gcov_read_summary (&object_summary);
+ else if (tag == GCOV_TAG_PROGRAM_SUMMARY)
+ program_count++;
+ else if (tag == GCOV_TAG_FUNCTION)
{
- if (! bb_graph[i].count_valid)
+ unsigned ident = gcov_read_unsigned ();
+ struct function_info *fn_n = functions;
+
+ /* Try to find the function in the list.
+ To speed up the search, first start from the last function
+ found. */
+ for (fn = fn ? fn->next : NULL; ; fn = fn->next)
{
- if (bb_graph[i].succ_count == 0)
- {
- total = 0;
- for (arcptr = bb_graph[i].succ; arcptr;
- arcptr = arcptr->succ_next)
- total += arcptr->arc_count;
- bb_graph[i].exec_count = total;
- bb_graph[i].count_valid = 1;
- changes = 1;
- }
- else if (bb_graph[i].pred_count == 0)
+ if (fn)
+ ;
+ else if ((fn = fn_n))
+ fn_n = NULL;
+ else
{
- total = 0;
- for (arcptr = bb_graph[i].pred; arcptr;
- arcptr = arcptr->pred_next)
- total += arcptr->arc_count;
- bb_graph[i].exec_count = total;
- bb_graph[i].count_valid = 1;
- changes = 1;
+ fnotice (stderr, "%s:unknown function '%u'\n",
+ da_file_name, ident);
+ break;
}
+ if (fn->ident == ident)
+ break;
}
- if (bb_graph[i].count_valid)
+
+ if (!fn)
+ ;
+ else if (gcov_read_unsigned () != fn->checksum)
{
- if (bb_graph[i].succ_count == 1)
- {
- total = 0;
- /* One of the counts will be invalid, but it is zero,
- so adding it in also doesn't hurt. */
- for (arcptr = bb_graph[i].succ; arcptr;
- arcptr = arcptr->succ_next)
- total += arcptr->arc_count;
- /* Calculate count for remaining arc by conservation. */
- total = bb_graph[i].exec_count - total;
- /* Search for the invalid arc, and set its count. */
- for (arcptr = bb_graph[i].succ; arcptr;
- arcptr = arcptr->succ_next)
- if (! arcptr->count_valid)
- break;
- if (! arcptr)
- abort ();
- arcptr->count_valid = 1;
- arcptr->arc_count = total;
- bb_graph[i].succ_count--;
-
- bb_graph[arcptr->target].pred_count--;
- changes = 1;
- }
- if (bb_graph[i].pred_count == 1)
- {
- total = 0;
- /* One of the counts will be invalid, but it is zero,
- so adding it in also doesn't hurt. */
- for (arcptr = bb_graph[i].pred; arcptr;
- arcptr = arcptr->pred_next)
- total += arcptr->arc_count;
- /* Calculate count for remaining arc by conservation. */
- total = bb_graph[i].exec_count - total;
- /* Search for the invalid arc, and set its count. */
- for (arcptr = bb_graph[i].pred; arcptr;
- arcptr = arcptr->pred_next)
- if (! arcptr->count_valid)
- break;
- if (! arcptr)
- abort ();
- arcptr->count_valid = 1;
- arcptr->arc_count = total;
- bb_graph[i].pred_count--;
-
- bb_graph[arcptr->source].succ_count--;
- changes = 1;
- }
+ mismatch:;
+ fnotice (stderr, "%s:profile mismatch for '%s'\n",
+ da_file_name, fn->name);
+ goto cleanup;
}
}
+ else if (tag == GCOV_TAG_FOR_COUNTER (GCOV_COUNTER_ARCS) && fn)
+ {
+ if (length != GCOV_TAG_COUNTER_LENGTH (fn->num_counts))
+ goto mismatch;
+
+ if (!fn->counts)
+ fn->counts = XCNEWVEC (gcov_type, fn->num_counts);
+
+ for (ix = 0; ix != fn->num_counts; ix++)
+ fn->counts[ix] += gcov_read_counter ();
+ }
+ gcov_sync (base, length);
+ if ((error = gcov_is_error ()))
+ {
+ fnotice (stderr, error < 0 ? "%s:overflowed\n" : "%s:corrupted\n",
+ da_file_name);
+ goto cleanup;
+ }
}
- /* If the graph has been correctly solved, every block will have a
- succ and pred count of zero. */
- for (i = 0; i < num_blocks; i++)
- if (bb_graph[i].succ_count || bb_graph[i].pred_count)
- abort ();
+ gcov_close ();
+ return 0;
}
+/* Solve the flow graph. Propagate counts from the instrumented arcs
+ to the blocks and the uninstrumented arcs. */
static void
-read_files ()
+solve_flow_graph (function_t *fn)
{
- struct stat buf;
- struct bb_info_list *list_end = 0;
- struct bb_info_list *b_ptr;
-
- while (! feof (bbg_file))
+ unsigned ix;
+ arc_t *arc;
+ gcov_type *count_ptr = fn->counts;
+ block_t *blk;
+ block_t *valid_blocks = NULL; /* valid, but unpropagated blocks. */
+ block_t *invalid_blocks = NULL; /* invalid, but inferable blocks. */
+
+ if (fn->num_blocks < 2)
+ fnotice (stderr, "%s:'%s' lacks entry and/or exit blocks\n",
+ bbg_file_name, fn->name);
+ else
{
- b_ptr = (struct bb_info_list *) xmalloc (sizeof (struct bb_info_list));
-
- b_ptr->next = 0;
- if (list_end)
- list_end->next = b_ptr;
+ if (fn->blocks[0].num_pred)
+ fnotice (stderr, "%s:'%s' has arcs to entry block\n",
+ bbg_file_name, fn->name);
else
- bb_graph_list = b_ptr;
- list_end = b_ptr;
+ /* We can't deduce the entry block counts from the lack of
+ predecessors. */
+ fn->blocks[0].num_pred = ~(unsigned)0;
- /* Read in the data in the .bbg file and reconstruct the program flow
- graph for one function. */
- create_program_flow_graph (b_ptr);
-
- /* Set the EOF condition if at the end of file. */
- ungetc (getc (bbg_file), bbg_file);
+ if (fn->blocks[fn->num_blocks - 1].num_succ)
+ fnotice (stderr, "%s:'%s' has arcs from exit block\n",
+ bbg_file_name, fn->name);
+ else
+ /* Likewise, we can't deduce exit block counts from the lack
+ of its successors. */
+ fn->blocks[fn->num_blocks - 1].num_succ = ~(unsigned)0;
}
- /* Calculate all of the basic block execution counts and branch
- taken probabilities. */
+ /* Propagate the measured counts, this must be done in the same
+ order as the code in profile.c */
+ for (ix = 0, blk = fn->blocks; ix != fn->num_blocks; ix++, blk++)
+ {
+ block_t const *prev_dst = NULL;
+ int out_of_order = 0;
+ int non_fake_succ = 0;
- for (b_ptr = bb_graph_list; b_ptr; b_ptr = b_ptr->next)
- solve_program_flow_graph (b_ptr);
+ for (arc = blk->succ; arc; arc = arc->succ_next)
+ {
+ if (!arc->fake)
+ non_fake_succ++;
- /* Read in all of the data from the .bb file. This info will be accessed
- sequentially twice. */
- stat (bb_file_name, &buf);
- bb_data_size = buf.st_size / 4;
+ if (!arc->on_tree)
+ {
+ if (count_ptr)
+ arc->count = *count_ptr++;
+ arc->count_valid = 1;
+ blk->num_succ--;
+ arc->dst->num_pred--;
+ }
+ if (prev_dst && prev_dst > arc->dst)
+ out_of_order = 1;
+ prev_dst = arc->dst;
+ }
+ if (non_fake_succ == 1)
+ {
+ /* If there is only one non-fake exit, it is an
+ unconditional branch. */
+ for (arc = blk->succ; arc; arc = arc->succ_next)
+ if (!arc->fake)
+ {
+ arc->is_unconditional = 1;
+ /* If this block is instrumenting a call, it might be
+ an artificial block. It is not artificial if it has
+ a non-fallthrough exit, or the destination of this
+ arc has more than one entry. Mark the destination
+ block as a return site, if none of those conditions
+ hold. */
+ if (blk->is_call_site && arc->fall_through
+ && arc->dst->pred == arc && !arc->pred_next)
+ arc->dst->is_call_return = 1;
+ }
+ }
- bb_data = (char *) xmalloc ((unsigned) buf.st_size);
- fread (bb_data, sizeof (char), buf.st_size, bb_file);
+ /* Sort the successor arcs into ascending dst order. profile.c
+ normally produces arcs in the right order, but sometimes with
+ one or two out of order. We're not using a particularly
+ smart sort. */
+ if (out_of_order)
+ {
+ arc_t *start = blk->succ;
+ unsigned changes = 1;
- fclose (bb_file);
- if (da_file)
- fclose (da_file);
- fclose (bbg_file);
-}
+ while (changes)
+ {
+ arc_t *arc, *arc_p, *arc_n;
+ changes = 0;
+ for (arc_p = NULL, arc = start; (arc_n = arc->succ_next);)
+ {
+ if (arc->dst > arc_n->dst)
+ {
+ changes = 1;
+ if (arc_p)
+ arc_p->succ_next = arc_n;
+ else
+ start = arc_n;
+ arc->succ_next = arc_n->succ_next;
+ arc_n->succ_next = arc;
+ arc_p = arc_n;
+ }
+ else
+ {
+ arc_p = arc;
+ arc = arc_n;
+ }
+ }
+ }
+ blk->succ = start;
+ }
-/* Scan the data in the .bb file to find all source files referenced,
- and the largest line number mentioned in each one. */
+ /* Place it on the invalid chain, it will be ignored if that's
+ wrong. */
+ blk->invalid_chain = 1;
+ blk->chain = invalid_blocks;
+ invalid_blocks = blk;
+ }
-static void
-scan_for_source_files ()
-{
- struct sourcefile *s_ptr = NULL;
- char *ptr;
- long count;
- long line_num;
-
- /* Search the bb_data to find:
- 1) The number of sources files contained herein, and
- 2) The largest line number for each source file. */
-
- ptr = bb_data;
- sources = 0;
- for (count = 0; count < bb_data_size; count++)
+ while (invalid_blocks || valid_blocks)
{
- __fetch_long (&line_num, ptr, 4);
- ptr += 4;
- if (line_num == -1)
+ while ((blk = invalid_blocks))
+ {
+ gcov_type total = 0;
+ const arc_t *arc;
+
+ invalid_blocks = blk->chain;
+ blk->invalid_chain = 0;
+ if (!blk->num_succ)
+ for (arc = blk->succ; arc; arc = arc->succ_next)
+ total += arc->count;
+ else if (!blk->num_pred)
+ for (arc = blk->pred; arc; arc = arc->pred_next)
+ total += arc->count;
+ else
+ continue;
+
+ blk->count = total;
+ blk->count_valid = 1;
+ blk->chain = valid_blocks;
+ blk->valid_chain = 1;
+ valid_blocks = blk;
+ }
+ while ((blk = valid_blocks))
{
- /* A source file name follows. Check to see if we already have
- a sourcefile structure for this file. */
- s_ptr = sources;
- while (s_ptr && strcmp (s_ptr->name, ptr))
- s_ptr = s_ptr->next;
+ gcov_type total;
+ arc_t *arc, *inv_arc;
- if (s_ptr == 0)
+ valid_blocks = blk->chain;
+ blk->valid_chain = 0;
+ if (blk->num_succ == 1)
{
- /* No sourcefile structure for this file name exists, create
- a new one, and append it to the front of the sources list. */
- s_ptr = (struct sourcefile *) xmalloc (sizeof(struct sourcefile));
- s_ptr->name = xstrdup (ptr);
- s_ptr->maxlineno = 0;
- s_ptr->next = sources;
- sources = s_ptr;
+ block_t *dst;
+
+ total = blk->count;
+ inv_arc = NULL;
+ for (arc = blk->succ; arc; arc = arc->succ_next)
+ {
+ total -= arc->count;
+ if (!arc->count_valid)
+ inv_arc = arc;
+ }
+ dst = inv_arc->dst;
+ inv_arc->count_valid = 1;
+ inv_arc->count = total;
+ blk->num_succ--;
+ dst->num_pred--;
+ if (dst->count_valid)
+ {
+ if (dst->num_pred == 1 && !dst->valid_chain)
+ {
+ dst->chain = valid_blocks;
+ dst->valid_chain = 1;
+ valid_blocks = dst;
+ }
+ }
+ else
+ {
+ if (!dst->num_pred && !dst->invalid_chain)
+ {
+ dst->chain = invalid_blocks;
+ dst->invalid_chain = 1;
+ invalid_blocks = dst;
+ }
+ }
}
+ if (blk->num_pred == 1)
+ {
+ block_t *src;
- /* Scan past the file name. */
- {
- long delim;
- do {
- count++;
- __fetch_long (&delim, ptr, 4);
- ptr += 4;
- } while (delim != line_num);
- }
- }
- else if (line_num == -2)
- {
- long delim;
-
- /* A function name follows. Ignore it. */
- do {
- count++;
- __fetch_long (&delim, ptr, 4);
- ptr += 4;
- } while (delim != line_num);
- }
- /* There will be a zero before the first file name, in which case s_ptr
- will still be uninitialized. So, only try to set the maxlineno
- field if line_num is non-zero. */
- else if (line_num > 0)
- {
- if (s_ptr->maxlineno <= line_num)
- s_ptr->maxlineno = line_num + 1;
- }
- else if (line_num < 0)
- {
- /* Don't know what this is, but it's garbage. */
- abort ();
+ total = blk->count;
+ inv_arc = NULL;
+ for (arc = blk->pred; arc; arc = arc->pred_next)
+ {
+ total -= arc->count;
+ if (!arc->count_valid)
+ inv_arc = arc;
+ }
+ src = inv_arc->src;
+ inv_arc->count_valid = 1;
+ inv_arc->count = total;
+ blk->num_pred--;
+ src->num_succ--;
+ if (src->count_valid)
+ {
+ if (src->num_succ == 1 && !src->valid_chain)
+ {
+ src->chain = valid_blocks;
+ src->valid_chain = 1;
+ valid_blocks = src;
+ }
+ }
+ else
+ {
+ if (!src->num_succ && !src->invalid_chain)
+ {
+ src->chain = invalid_blocks;
+ src->invalid_chain = 1;
+ invalid_blocks = src;
+ }
+ }
+ }
}
}
+
+ /* If the graph has been correctly solved, every block will have a
+ valid count. */
+ for (ix = 0; ix < fn->num_blocks; ix++)
+ if (!fn->blocks[ix].count_valid)
+ {
+ fnotice (stderr, "%s:graph is unsolvable for '%s'\n",
+ bbg_file_name, fn->name);
+ break;
+ }
}
+
\f
-/* Increment totals in FUNCTION according to arc A_PTR. */
+/* Increment totals in COVERAGE according to arc ARC. */
static void
-accumulate_branch_counts (function, a_ptr)
- struct coverage *function;
- struct arcdata *a_ptr;
+add_branch_counts (coverage_t *coverage, const arc_t *arc)
{
- if (a_ptr->call_insn)
- {
- function->calls++;
- if (a_ptr->total)
- function->calls_executed++;
- }
- else
+ if (arc->is_call_non_return)
{
- function->branches++;
- if (a_ptr->total)
- function->branches_executed++;
- if (a_ptr->hits)
- function->branches_taken++;
+ coverage->calls++;
+ if (arc->src->count)
+ coverage->calls_executed++;
}
-}
-
-/* Calculate the branch taken probabilities for all arcs branches at the
- end of this block. */
-
-static void
-calculate_branch_probs (block_ptr, line_info, function)
- struct bb_info *block_ptr;
- struct line_info *line_info;
- struct coverage *function;
-{
- gcov_type total;
- struct adj_list *arcptr;
-
- total = block_ptr->exec_count;
- for (arcptr = block_ptr->succ; arcptr; arcptr = arcptr->succ_next)
+ else if (!arc->is_unconditional)
{
- struct arcdata *a_ptr;
-
- /* Ignore fall through arcs as they aren't really branches. */
- if (arcptr->fall_through)
- continue;
-
- a_ptr = (struct arcdata *) xmalloc (sizeof (struct arcdata));
- a_ptr->total = total;
- a_ptr->hits = total ? arcptr->arc_count : 0;
- a_ptr->call_insn = arcptr->fake;
-
- if (function)
- accumulate_branch_counts (function, a_ptr);
- /* Prepend the new branch to the list. */
- a_ptr->next = line_info->branches;
- line_info->branches = a_ptr;
+ coverage->branches++;
+ if (arc->src->count)
+ coverage->branches_executed++;
+ if (arc->count)
+ coverage->branches_taken++;
}
}
format TOP. Return pointer to a static string. */
static char const *
-format_hwint (top, bottom, dp)
- HOST_WIDEST_INT top, bottom;
- int dp;
+format_gcov (gcov_type top, gcov_type bottom, int dp)
{
static char buffer[20];
-
+
if (dp >= 0)
{
float ratio = bottom ? (float)top / bottom : 0;
int ix;
unsigned limit = 100;
unsigned percent;
-
+
for (ix = dp; ix--; )
limit *= 10;
-
+
percent = (unsigned) (ratio * limit + (float)0.5);
if (percent <= 0 && top)
percent = 1;
}
}
else
- sprintf (buffer, HOST_WIDEST_INT_PRINT_DEC, top);
-
+ sprintf (buffer, HOST_WIDEST_INT_PRINT_DEC, (HOST_WIDEST_INT)top);
+
return buffer;
}
/* Output summary info for a function. */
static void
-function_summary (function, title)
- struct coverage *function;
- const char *title;
+function_summary (const coverage_t *coverage, const char *title)
{
- if (function->lines)
- fnotice (stdout, "%s of %d lines executed in %s %s\n",
- format_hwint (function->lines_executed,
- function->lines, 2),
- function->lines, title, function->name);
+ fnotice (stdout, "%s '%s'\n", title, coverage->name);
+
+ if (coverage->lines)
+ fnotice (stdout, "Lines executed:%s of %d\n",
+ format_gcov (coverage->lines_executed, coverage->lines, 2),
+ coverage->lines);
else
- fnotice (stdout, "No executable lines in %s %s\n",
- title, function->name);
+ fnotice (stdout, "No executable lines\n");
- if (output_branch_probs)
+ if (flag_branches)
{
- if (function->branches)
+ if (coverage->branches)
{
- fnotice (stdout, "%s of %d branches executed in %s %s\n",
- format_hwint (function->branches_executed,
- function->branches, 2),
- function->branches, title, function->name);
- fnotice (stdout,
- "%s of %d branches taken at least once in %s %s\n",
- format_hwint (function->branches_taken,
- function->branches, 2),
- function->branches, title, function->name);
+ fnotice (stdout, "Branches executed:%s of %d\n",
+ format_gcov (coverage->branches_executed,
+ coverage->branches, 2),
+ coverage->branches);
+ fnotice (stdout, "Taken at least once:%s of %d\n",
+ format_gcov (coverage->branches_taken,
+ coverage->branches, 2),
+ coverage->branches);
}
else
- fnotice (stdout, "No branches in %s %s\n", title, function->name);
- if (function->calls)
- fnotice (stdout, "%s of %d calls executed in %s %s\n",
- format_hwint (function->calls_executed,
- function->calls, 2),
- function->calls, title, function->name);
+ fnotice (stdout, "No branches\n");
+ if (coverage->calls)
+ fnotice (stdout, "Calls executed:%s of %d\n",
+ format_gcov (coverage->calls_executed, coverage->calls, 2),
+ coverage->calls);
else
- fnotice (stdout, "No calls in %s %s\n", title, function->name);
+ fnotice (stdout, "No calls\n");
}
}
to each output name (except when the current source file is the
input file, so you don't get a double concatenation). The two
components are separated by '##'. Also '.' filename components are
- removed and '..' components are renamed to '^'. */
+ removed and '..' components are renamed to '^'. */
static char *
-make_gcov_file_name (src_name)
- char *src_name;
+make_gcov_file_name (const char *input_name, const char *src_name)
{
- char *cptr;
- char *name = xmalloc (strlen (src_name) + strlen (input_file_name) + 10);
-
- name[0] = 0;
- if (output_long_names && strcmp (src_name, input_file_name))
+ const char *cptr;
+ char *name;
+
+ if (flag_long_names && input_name && strcmp (src_name, input_name))
{
+ name = XNEWVEC (char, strlen (src_name) + strlen (input_name) + 10);
+ name[0] = 0;
/* Generate the input filename part. */
- cptr = preserve_paths ? NULL : strrchr (input_file_name, '/');
- cptr = cptr ? cptr + 1 : input_file_name;
- strcat (name, cptr);
+ cptr = flag_preserve_paths ? NULL : lbasename (input_name);
+ strcat (name, cptr ? cptr : input_name);
strcat (name, "##");
}
-
- /* Generate the source filename part. */
- cptr = preserve_paths ? NULL : strrchr (src_name, '/');
- cptr = cptr ? cptr + 1 : src_name;
- strcat (name, cptr);
-
- if (preserve_paths)
+ else
{
- /* Convert '/' to '#', remove '/./', convert '/../' to '/^/' */
- char *prev;
-
- for (cptr = name; (cptr = strchr ((prev = cptr), '/'));)
- {
- unsigned shift = 0;
-
- if (prev + 1 == cptr && prev[0] == '.')
- {
- /* Remove '.' */
- shift = 2;
- }
- else if (prev + 2 == cptr && prev[0] == '.' && prev[1] == '.')
- {
- /* Convert '..' */
- shift = 1;
- prev[1] = '^';
- }
- else
- *cptr++ = '#';
- if (shift)
- {
- cptr = prev;
- do
- prev[0] = prev[shift];
- while (*prev++);
- }
- }
+ name = XNEWVEC (char, strlen (src_name) + 10);
+ name[0] = 0;
}
-
- /* Don't strip off the ending for compatibility with tcov, since
- this results in confusion if there is more than one file with the
- same basename, e.g. tmp.c and tmp.h. */
+
+ /* Generate the source filename part. */
+
+ cptr = flag_preserve_paths ? NULL : lbasename (src_name);
+ strcat (name, cptr ? cptr : src_name);
+
+ if (flag_preserve_paths)
+ {
+ /* Convert '/' and '\' to '#', remove '/./', convert '/../' to '/^/',
+ convert ':' to '~' on DOS based file system. */
+ char *pnew = name, *pold = name;
+
+ /* First check for leading drive separator. */
+
+ while (*pold != '\0')
+ {
+ if (*pold == '/' || *pold == '\\')
+ {
+ *pnew++ = '#';
+ pold++;
+ }
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+ else if (*pold == ':')
+ {
+ *pnew++ = '~';
+ pold++;
+ }
+#endif
+ else if ((*pold == '/' && strstr (pold, "/./") == pold)
+ || (*pold == '\\' && strstr (pold, "\\.\\") == pold))
+ pold += 3;
+ else if (*pold == '/' && strstr (pold, "/../") == pold)
+ {
+ strcpy (pnew, "/^/");
+ pnew += 3;
+ pold += 4;
+ }
+ else if (*pold == '\\' && strstr (pold, "\\..\\") == pold)
+ {
+ strcpy (pnew, "\\^\\");
+ pnew += 3;
+ pold += 4;
+ }
+ else
+ *pnew++ = *pold++;
+ }
+
+ *pnew = '\0';
+ }
+
strcat (name, ".gcov");
return name;
}
-/* Scan through the bb_data, and when the file name matches the
- source file name, then for each following line number, increment
+/* Scan through the bb_data for each line in the block, increment
the line number execution count indicated by the execution count of
the appropriate basic block. */
static void
-init_line_info (line_info, total, maxlineno)
- struct line_info *line_info;
- struct coverage *total;
- long maxlineno;
+add_line_counts (coverage_t *coverage, function_t *fn)
{
- long block_num = 0; /* current block number */
- struct bb_info *block_ptr = NULL; /* current block ptr */
- struct coverage function;
- struct coverage *func_ptr = NULL;
- struct bb_info_list *current_graph = NULL; /* Graph for current function. */
- int is_this_file = 0; /* We're scanning a block from the desired file. */
- char *ptr = bb_data;
- long count;
- long line_num;
- struct line_info *line_ptr; /* line info ptr. */
-
- memset (&function, 0, sizeof (function));
- if (output_function_summary)
- func_ptr = &function;
-
- for (count = 0; count < bb_data_size; count++)
+ unsigned ix;
+ line_t *line = NULL; /* This is propagated from one iteration to the
+ next. */
+
+ /* Scan each basic block. */
+ for (ix = 0; ix != fn->num_blocks; ix++)
{
- __fetch_long (&line_num, ptr, 4);
- ptr += 4;
- if (line_num < 0)
+ block_t *block = &fn->blocks[ix];
+ unsigned *encoding;
+ const source_t *src = NULL;
+ unsigned jx;
+
+ if (block->count && ix && ix + 1 != fn->num_blocks)
+ fn->blocks_executed++;
+ for (jx = 0, encoding = block->u.line.encoding;
+ jx != block->u.line.num; jx++, encoding++)
+ if (!*encoding)
+ {
+ unsigned src_n = *++encoding;
+
+ for (src = sources; src->index != src_n; src = src->next)
+ continue;
+ jx++;
+ }
+ else
+ {
+ line = &src->lines[*encoding];
+
+ if (coverage)
+ {
+ if (!line->exists)
+ coverage->lines++;
+ if (!line->count && block->count)
+ coverage->lines_executed++;
+ }
+ line->exists = 1;
+ line->count += block->count;
+ }
+ free (block->u.line.encoding);
+ block->u.cycle.arc = NULL;
+ block->u.cycle.ident = ~0U;
+
+ if (!ix || ix + 1 == fn->num_blocks)
+ /* Entry or exit block */;
+ else if (flag_all_blocks)
{
- long delim;
-
- if (line_num == -1)
- {
- /* Marks the beginning of a file name. Check to see
- whether this is the filename we are currently
- collecting data for. */
- is_this_file = !strcmp (total->name, ptr);
- }
- else if (line_num == -2)
- {
- /* Marks the start of a new function. Advance to the
- next program flow graph. */
- if (!current_graph)
- current_graph = bb_graph_list;
- else
- {
- if (block_num == current_graph->num_blocks - 1)
- /* Last block falls through to exit. */
- ;
- else if (block_num == current_graph->num_blocks - 2)
- {
- if (output_branch_probs && is_this_file)
- calculate_branch_probs (block_ptr, line_ptr, func_ptr);
- }
- else
- {
- fnotice (stderr,
- "didn't use all bb entries of graph, function %s\n",
- function.name);
- fnotice (stderr, "block_num = %ld, num_blocks = %d\n",
- block_num, current_graph->num_blocks);
- }
- if (func_ptr && is_this_file)
- function_summary (func_ptr, "function");
- current_graph = current_graph->next;
- }
- block_num = 0;
- block_ptr = current_graph->bb_graph;
- memset (&function, 0, sizeof (function));
- function.name = ptr;
- }
- else
- {
- fnotice (stderr, "ERROR: unexpected line number %ld\n", line_num);
- abort ();
- }
+ line_t *block_line = line ? line : &fn->src->lines[fn->line];
+
+ block->chain = block_line->u.blocks;
+ block_line->u.blocks = block;
+ }
+ else if (flag_branches)
+ {
+ arc_t *arc;
- /* Scan past the string. */
- for (delim = 0; delim != line_num; count++)
+ for (arc = block->succ; arc; arc = arc->succ_next)
{
- __fetch_long (&delim, ptr, 4);
- ptr += 4;
+ arc->line_next = line->u.branches;
+ line->u.branches = arc;
+ if (coverage && !arc->is_unconditional)
+ add_branch_counts (coverage, arc);
}
}
- else if (!line_num)
+ }
+ if (!line)
+ fnotice (stderr, "%s:no lines for '%s'\n", bbg_file_name, fn->name);
+}
+
+/* Accumulate the line counts of a file. */
+
+static void
+accumulate_line_counts (source_t *src)
+{
+ line_t *line;
+ function_t *fn, *fn_p, *fn_n;
+ unsigned ix;
+
+ /* Reverse the function order. */
+ for (fn = src->functions, fn_p = NULL; fn;
+ fn_p = fn, fn = fn_n)
+ {
+ fn_n = fn->line_next;
+ fn->line_next = fn_p;
+ }
+ src->functions = fn_p;
+
+ for (ix = src->num_lines, line = src->lines; ix--; line++)
+ {
+ if (!flag_all_blocks)
{
- /* Marks the end of a block. */
- if (block_num >= current_graph->num_blocks)
+ arc_t *arc, *arc_p, *arc_n;
+
+ /* Total and reverse the branch information. */
+ for (arc = line->u.branches, arc_p = NULL; arc;
+ arc_p = arc, arc = arc_n)
{
- fnotice (stderr, "ERROR: too many basic blocks in function %s\n",
- function.name);
- abort ();
+ arc_n = arc->line_next;
+ arc->line_next = arc_p;
+
+ add_branch_counts (&src->coverage, arc);
}
-
- if (output_branch_probs && is_this_file)
- calculate_branch_probs (block_ptr, line_ptr, func_ptr);
-
- block_num++;
- block_ptr++;
+ line->u.branches = arc_p;
}
- else if (is_this_file)
+ else if (line->u.blocks)
{
- if (line_num >= maxlineno)
+ /* The user expects the line count to be the number of times
+ a line has been executed. Simply summing the block count
+ will give an artificially high number. The Right Thing
+ is to sum the entry counts to the graph of blocks on this
+ line, then find the elementary cycles of the local graph
+ and add the transition counts of those cycles. */
+ block_t *block, *block_p, *block_n;
+ gcov_type count = 0;
+
+ /* Reverse the block information. */
+ for (block = line->u.blocks, block_p = NULL; block;
+ block_p = block, block = block_n)
{
- fnotice (stderr, "ERROR: out of range line number in function %s\n",
- function.name);
- abort ();
+ block_n = block->chain;
+ block->chain = block_p;
+ block->u.cycle.ident = ix;
+ }
+ line->u.blocks = block_p;
+
+ /* Sum the entry arcs. */
+ for (block = line->u.blocks; block; block = block->chain)
+ {
+ arc_t *arc;
+
+ for (arc = block->pred; arc; arc = arc->pred_next)
+ {
+ if (arc->src->u.cycle.ident != ix)
+ count += arc->count;
+ if (flag_branches)
+ add_branch_counts (&src->coverage, arc);
+ }
+
+ /* Initialize the cs_count. */
+ for (arc = block->succ; arc; arc = arc->succ_next)
+ arc->cs_count = arc->count;
}
- line_ptr = &line_info[line_num];
- if (func_ptr)
+ /* Find the loops. This uses the algorithm described in
+ Tiernan 'An Efficient Search Algorithm to Find the
+ Elementary Circuits of a Graph', CACM Dec 1970. We hold
+ the P array by having each block point to the arc that
+ connects to the previous block. The H array is implicitly
+ held because of the arc ordering, and the block's
+ previous arc pointer.
+
+ Although the algorithm is O(N^3) for highly connected
+ graphs, at worst we'll have O(N^2), as most blocks have
+ only one or two exits. Most graphs will be small.
+
+ For each loop we find, locate the arc with the smallest
+ transition count, and add that to the cumulative
+ count. Decrease flow over the cycle and remove the arc
+ from consideration. */
+ for (block = line->u.blocks; block; block = block->chain)
{
- if (!line_ptr->exists)
- func_ptr->lines++;
- if (!line_ptr->count && block_ptr->exec_count)
- func_ptr->lines_executed++;
+ block_t *head = block;
+ arc_t *arc;
+
+ next_vertex:;
+ arc = head->succ;
+ current_vertex:;
+ while (arc)
+ {
+ block_t *dst = arc->dst;
+ if (/* Already used that arc. */
+ arc->cycle
+ /* Not to same graph, or before first vertex. */
+ || dst->u.cycle.ident != ix
+ /* Already in path. */
+ || dst->u.cycle.arc)
+ {
+ arc = arc->succ_next;
+ continue;
+ }
+
+ if (dst == block)
+ {
+ /* Found a closing arc. */
+ gcov_type cycle_count = arc->cs_count;
+ arc_t *cycle_arc = arc;
+ arc_t *probe_arc;
+
+ /* Locate the smallest arc count of the loop. */
+ for (dst = head; (probe_arc = dst->u.cycle.arc);
+ dst = probe_arc->src)
+ if (cycle_count > probe_arc->cs_count)
+ {
+ cycle_count = probe_arc->cs_count;
+ cycle_arc = probe_arc;
+ }
+
+ count += cycle_count;
+ cycle_arc->cycle = 1;
+
+ /* Remove the flow from the cycle. */
+ arc->cs_count -= cycle_count;
+ for (dst = head; (probe_arc = dst->u.cycle.arc);
+ dst = probe_arc->src)
+ probe_arc->cs_count -= cycle_count;
+
+ /* Unwind to the cyclic arc. */
+ while (head != cycle_arc->src)
+ {
+ arc = head->u.cycle.arc;
+ head->u.cycle.arc = NULL;
+ head = arc->src;
+ }
+ /* Move on. */
+ arc = arc->succ_next;
+ continue;
+ }
+
+ /* Add new block to chain. */
+ dst->u.cycle.arc = arc;
+ head = dst;
+ goto next_vertex;
+ }
+ /* We could not add another vertex to the path. Remove
+ the last vertex from the list. */
+ arc = head->u.cycle.arc;
+ if (arc)
+ {
+ /* It was not the first vertex. Move onto next arc. */
+ head->u.cycle.arc = NULL;
+ head = arc->src;
+ arc = arc->succ_next;
+ goto current_vertex;
+ }
+ /* Mark this block as unusable. */
+ block->u.cycle.ident = ~0U;
}
-
- /* Accumulate execution data for this line number. */
- line_ptr->count += block_ptr->exec_count;
- line_ptr->exists = 1;
+
+ line->count = count;
}
- }
-
- if (func_ptr && is_this_file)
- function_summary (func_ptr, "function");
-
- /* Calculate summary test coverage statistics. */
- for (line_num = 1, line_ptr = &line_info[line_num];
- line_num < maxlineno; line_num++, line_ptr++)
- {
- struct arcdata *a_ptr, *prev, *next;
-
- if (line_ptr->exists)
+
+ if (line->exists)
{
- total->lines++;
- if (line_ptr->count)
- total->lines_executed++;
+ src->coverage.lines++;
+ if (line->count)
+ src->coverage.lines_executed++;
}
+ }
+}
- /* Total and reverse the branch information. */
- for (a_ptr = line_ptr->branches, prev = NULL; a_ptr; a_ptr = next)
- {
- next = a_ptr->next;
- a_ptr->next = prev;
- prev = a_ptr;
+/* Output information about ARC number IX. Returns nonzero if
+ anything is output. */
- accumulate_branch_counts (total, a_ptr);
+static int
+output_branch_count (FILE *gcov_file, int ix, const arc_t *arc)
+{
+
+ if (arc->is_call_non_return)
+ {
+ if (arc->src->count)
+ {
+ fnotice (gcov_file, "call %2d returned %s\n", ix,
+ format_gcov (arc->src->count - arc->count,
+ arc->src->count, -flag_counts));
}
- line_ptr->branches = prev;
+ else
+ fnotice (gcov_file, "call %2d never executed\n", ix);
}
+ else if (!arc->is_unconditional)
+ {
+ if (arc->src->count)
+ fnotice (gcov_file, "branch %2d taken %s%s\n", ix,
+ format_gcov (arc->count, arc->src->count, -flag_counts),
+ arc->fall_through ? " (fallthrough)" : "");
+ else
+ fnotice (gcov_file, "branch %2d never executed\n", ix);
+ }
+ else if (flag_unconditional && !arc->dst->is_call_return)
+ {
+ if (arc->src->count)
+ fnotice (gcov_file, "unconditional %2d taken %s\n", ix,
+ format_gcov (arc->count, arc->src->count, -flag_counts));
+ else
+ fnotice (gcov_file, "unconditional %2d never executed\n", ix);
+ }
+ else
+ return 0;
+ return 1;
+
}
/* Read in the source file one line at a time, and output that line to
information. */
static void
-output_line_info (gcov_file, line_info, total, maxlineno)
- FILE *gcov_file;
- const struct line_info *line_info;
- const struct coverage *total;
- long maxlineno;
+output_lines (FILE *gcov_file, const source_t *src)
{
FILE *source_file;
- long line_num; /* current line number */
- const struct line_info *line_ptr; /* current line info ptr. */
- char string[STRING_SIZE]; /* line buffer. */
- char const *retval = ""; /* status of source file reading. */
+ unsigned line_num; /* current line number. */
+ const line_t *line; /* current line info ptr. */
+ char string[STRING_SIZE]; /* line buffer. */
+ char const *retval = ""; /* status of source file reading. */
+ function_t *fn = NULL;
+
+ fprintf (gcov_file, "%9s:%5d:Source:%s\n", "-", 0, src->name);
+ if (!multiple_files)
+ {
+ fprintf (gcov_file, "%9s:%5d:Graph:%s\n", "-", 0, bbg_file_name);
+ fprintf (gcov_file, "%9s:%5d:Data:%s\n", "-", 0,
+ no_data_file ? "-" : da_file_name);
+ fprintf (gcov_file, "%9s:%5d:Runs:%u\n", "-", 0,
+ object_summary.ctrs[GCOV_COUNTER_ARCS].runs);
+ }
+ fprintf (gcov_file, "%9s:%5d:Programs:%u\n", "-", 0, program_count);
- fprintf (gcov_file, "%9s:%5d:Source:%s\n", "-", 0, total->name);
- fprintf (gcov_file, "%9s:%5d:Object:%s\n", "-", 0, bb_file_name);
-
- source_file = fopen (total->name, "r");
+ source_file = fopen (src->name, "r");
if (!source_file)
{
- fnotice (stderr, "Could not open source file %s.\n", total->name);
+ fnotice (stderr, "%s:cannot open source file\n", src->name);
retval = NULL;
}
- else
+ else if (src->file_time == 0)
+ fprintf (gcov_file, "%9s:%5d:Source is newer than graph\n", "-", 0);
+
+ if (flag_branches)
+ fn = src->functions;
+
+ for (line_num = 1, line = &src->lines[line_num];
+ line_num < src->num_lines; line_num++, line++)
{
- struct stat status;
-
- if (!fstat (fileno (source_file), &status)
- && status.st_mtime > bb_file_time)
+ for (; fn && fn->line == line_num; fn = fn->line_next)
{
- fnotice (stderr, "Warning: source file %s is newer than %s\n",
- total->name, bb_file_name);
- fprintf (gcov_file, "%9s:%5d:Source is newer than compiler output\n",
- "-", 0);
+ arc_t *arc = fn->blocks[fn->num_blocks - 1].pred;
+ gcov_type return_count = fn->blocks[fn->num_blocks - 1].count;
+
+ for (; arc; arc = arc->pred_next)
+ if (arc->fake)
+ return_count -= arc->count;
+
+ fprintf (gcov_file, "function %s", fn->name);
+ fprintf (gcov_file, " called %s",
+ format_gcov (fn->blocks[0].count, 0, -1));
+ fprintf (gcov_file, " returned %s",
+ format_gcov (return_count, fn->blocks[0].count, 0));
+ fprintf (gcov_file, " blocks executed %s",
+ format_gcov (fn->blocks_executed, fn->num_blocks - 2, 0));
+ fprintf (gcov_file, "\n");
}
- }
- for (line_num = 1, line_ptr = &line_info[line_num];
- line_num < maxlineno; line_num++, line_ptr++)
- {
/* For lines which don't exist in the .bb file, print '-' before
- the source line. For lines which exist but were never
- executed, print '#####' before the source line. Otherwise,
- print the execution count before the source line. There are
- 16 spaces of indentation added before the source line so that
- tabs won't be messed up. */
- fprintf (gcov_file, "%9s:%5ld:",
- !line_ptr->exists ? "-"
- : !line_ptr->count ? "#####"
- : format_hwint (line_ptr->count, 0, -1), line_num);
-
+ the source line. For lines which exist but were never
+ executed, print '#####' before the source line. Otherwise,
+ print the execution count before the source line. There are
+ 16 spaces of indentation added before the source line so that
+ tabs won't be messed up. */
+ fprintf (gcov_file, "%9s:%5u:",
+ !line->exists ? "-" : !line->count ? "#####"
+ : format_gcov (line->count, 0, -1), line_num);
+
if (retval)
{
/* Copy source line. */
{
retval = fgets (string, STRING_SIZE, source_file);
if (!retval)
- {
- fnotice (stderr,
- "Unexpected EOF while reading source file %s.\n",
- total->name);
- break;
- }
+ break;
fputs (retval, gcov_file);
}
while (!retval[0] || retval[strlen (retval) - 1] != '\n');
}
if (!retval)
- fputs ("??\n", gcov_file);
-
- if (output_branch_probs)
+ fputs ("/*EOF*/\n", gcov_file);
+
+ if (flag_all_blocks)
{
- int i;
- struct arcdata *a_ptr;
-
- for (i = 0, a_ptr = line_ptr->branches; a_ptr;
- a_ptr = a_ptr->next, i++)
+ block_t *block;
+ arc_t *arc;
+ int ix, jx;
+
+ for (ix = jx = 0, block = line->u.blocks; block;
+ block = block->chain)
{
- if (a_ptr->call_insn)
- {
- if (a_ptr->total == 0)
- fnotice (gcov_file, "call %2d never executed\n", i);
- else
- fnotice
- (gcov_file, "call %2d returns %s\n", i,
- format_hwint (a_ptr->total - a_ptr->hits,
- a_ptr->total,
- -output_branch_counts));
- }
- else
- {
- if (a_ptr->total == 0)
- fnotice (gcov_file, "branch %2d never executed\n", i);
- else
- fnotice
- (gcov_file, "branch %2d taken %s\n", i,
- format_hwint (a_ptr->hits, a_ptr->total,
- -output_branch_counts));
- }
+ if (!block->is_call_return)
+ fprintf (gcov_file, "%9s:%5u-block %2d\n",
+ !line->exists ? "-" : !block->count ? "$$$$$"
+ : format_gcov (block->count, 0, -1),
+ line_num, ix++);
+ if (flag_branches)
+ for (arc = block->succ; arc; arc = arc->succ_next)
+ jx += output_branch_count (gcov_file, jx, arc);
}
}
+ else if (flag_branches)
+ {
+ int ix;
+ arc_t *arc;
+
+ for (ix = 0, arc = line->u.branches; arc; arc = arc->line_next)
+ ix += output_branch_count (gcov_file, ix, arc);
+ }
}
-
+
/* Handle all remaining source lines. There may be lines after the
last line of code. */
if (retval)
{
for (; (retval = fgets (string, STRING_SIZE, source_file)); line_num++)
{
- fprintf (gcov_file, "%9s:%5ld:%s", "-", line_num, retval);
-
+ fprintf (gcov_file, "%9s:%5u:%s", "-", line_num, retval);
+
while (!retval[0] || retval[strlen (retval) - 1] != '\n')
{
retval = fgets (string, STRING_SIZE, source_file);
}
}
}
-
+
if (source_file)
fclose (source_file);
}
-
-/* Calculate line execution counts, and output a .gcov file for source
- file S_PTR. Allocate an array big enough to hold a count for each
- line. Scan through the bb_data, and when the file name matches the
- current file name, then for each following line number, increment
- the line number execution count indicated by the execution count of
- the appropriate basic block. */
-
-static void
-output_data (s_ptr)
- struct sourcefile *s_ptr;
-{
- struct line_info *line_info /* line info data */
- = (struct line_info *) xcalloc (s_ptr->maxlineno,
- sizeof (struct line_info));
- long line_num;
- struct coverage total;
-
- memset (&total, 0, sizeof (total));
- total.name = s_ptr->name;
-
- init_line_info (line_info, &total, s_ptr->maxlineno);
- function_summary (&total, "file");
-
- if (output_gcov_file)
- {
- /* Now the statistics are ready. Read in the source file one
- line at a time, and output that line to the gcov file
- preceded by its execution information. */
-
- char *gcov_file_name = make_gcov_file_name (total.name);
- FILE *gcov_file = fopen (gcov_file_name, "w");
-
- if (gcov_file)
- {
- fnotice (stdout, "Creating %s.\n", gcov_file_name);
- output_line_info (gcov_file, line_info, &total, s_ptr->maxlineno);
- if (ferror (gcov_file))
- fnotice (stderr, "Error writing output file %s.\n",
- gcov_file_name);
- fclose (gcov_file);
- }
- else
- fnotice (stderr, "Could not open output file %s.\n", gcov_file_name);
- free (gcov_file_name);
- }
-
- /* Free data. */
- for (line_num = 1; line_num != s_ptr->maxlineno; line_num++)
- {
- struct arcdata *branch, *next;
-
- for (branch = line_info[line_num].branches; branch; branch = next)
- {
- next = branch->next;
- free (branch);
- }
- }
- free (line_info);
-}
OSDN Git Service
