/* Convert RTL to assembler code and output it, for GNU compiler.
- Copyright (C) 1987, 88, 89, 92-98, 1999 Free Software Foundation, Inc.
+ Copyright (C) 1987, 1988, 1989, 1992, 1993, 1994, 1995, 1996, 1997,
+ 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
This file is part of GNU CC.
the Free Software Foundation, 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */
-
/* This is the final pass of the compiler.
It looks at the rtl code for a function and outputs assembler code.
#include "tree.h"
#include "rtl.h"
+#include "tm_p.h"
#include "regs.h"
#include "insn-config.h"
-#include "insn-flags.h"
#include "insn-attr.h"
-#include "insn-codes.h"
#include "recog.h"
#include "conditions.h"
#include "flags.h"
#include "real.h"
#include "hard-reg-set.h"
-#include "defaults.h"
#include "output.h"
#include "except.h"
#include "function.h"
#include "toplev.h"
#include "reload.h"
#include "intl.h"
+#include "basic-block.h"
-/* Get N_SLINE and N_SOL from stab.h if we can expect the file to exist. */
#if defined (DBX_DEBUGGING_INFO) || defined (XCOFF_DEBUGGING_INFO)
#include "dbxout.h"
-#if defined (USG) || !defined (HAVE_STAB_H)
-#include "gstab.h" /* If doing DBX on sysV, use our own stab.h. */
-#else
-#include <stab.h>
-#endif
-
#endif /* DBX_DEBUGGING_INFO || XCOFF_DEBUGGING_INFO */
#ifdef XCOFF_DEBUGGING_INFO
#include "sdbout.h"
#endif
-/* .stabd code for line number. */
-#ifndef N_SLINE
-#define N_SLINE 0x44
-#endif
-
-/* .stabs code for included file name. */
-#ifndef N_SOL
-#define N_SOL 0x84
-#endif
-
-#ifndef INT_TYPE_SIZE
-#define INT_TYPE_SIZE BITS_PER_WORD
-#endif
-
-#ifndef LONG_TYPE_SIZE
-#define LONG_TYPE_SIZE BITS_PER_WORD
-#endif
-
/* If we aren't using cc0, CC_STATUS_INIT shouldn't exist. So define a
null default for it to save conditionalization later. */
#ifndef CC_STATUS_INIT
#endif
/* Last insn processed by final_scan_insn. */
-static rtx debug_insn = 0;
+static rtx debug_insn;
+rtx current_output_insn;
/* Line number of last NOTE. */
static int last_linenum;
static int high_function_linenum;
/* Filename of last NOTE. */
-static char *last_filename;
+static const char *last_filename;
/* Number of basic blocks seen so far;
used if profile_block_flag is set. */
static int count_basic_blocks;
/* Number of instrumented arcs when profile_arc_flag is set. */
-extern int count_instrumented_arcs;
+extern int count_instrumented_edges;
extern int length_unit_log; /* This is defined in insn-attrtab.c. */
static int new_block = 1;
-/* All the symbol-blocks (levels of scoping) in the compilation
- are assigned sequence numbers in order of appearance of the
- beginnings of the symbol-blocks. Both final and dbxout do this,
- and assume that they will both give the same number to each block.
- Final uses these sequence numbers to generate assembler label names
- LBBnnn and LBEnnn for the beginning and end of the symbol-block.
- Dbxout uses the sequence numbers to generate references to the same labels
- from the dbx debugging information.
-
- Sdb records this level at the beginning of each function,
- in order to find the current level when recursing down declarations.
- It outputs the block beginning and endings
- at the point in the asm file where the blocks would begin and end. */
-
-int next_block_index;
-
/* Assign a unique number to each insn that is output.
This can be used to generate unique local labels. */
int profile_label_no;
-/* Length so far allocated in PENDING_BLOCKS. */
-
-static int max_block_depth;
-
-/* Stack of sequence numbers of symbol-blocks of which we have seen the
- beginning but not yet the end. Sequence numbers are assigned at
- the beginning; this stack allows us to find the sequence number
- of a block that is ending. */
-
-static int *pending_blocks;
-
-/* Number of elements currently in use in PENDING_BLOCKS. */
+/* Number of unmatched NOTE_INSN_BLOCK_BEG notes we have seen. */
static int block_depth;
static char *line_note_exists;
+#ifdef HAVE_conditional_execution
+/* Nonnull if the insn currently being emitted was a COND_EXEC pattern. */
+rtx current_insn_predicate;
+#endif
+
/* Linked list to hold line numbers for each basic block. */
-struct bb_list {
+struct bb_list
+{
struct bb_list *next; /* pointer to next basic block */
int line_num; /* line number */
int file_label_num; /* LPBC<n> label # for stored filename */
/* Linked list to hold the strings for each file and function name output. */
-struct bb_str {
+struct bb_str
+{
struct bb_str *next; /* pointer to next string */
const char *string; /* string */
int label_num; /* label number */
int length; /* string length */
};
-extern rtx peephole PROTO((rtx));
-
static struct bb_str *sbb_head = 0; /* Head of string list. */
static struct bb_str **sbb_tail = &sbb_head; /* Ptr to store next bb str */
static int sbb_label_num = 0; /* Last label used */
#ifdef HAVE_ATTR_length
-static int asm_insn_count PROTO((rtx));
-#endif
-static void profile_function PROTO((FILE *));
-static void profile_after_prologue PROTO((FILE *));
-static void add_bb PROTO((FILE *));
-static int add_bb_string PROTO((const char *, int));
-static void output_source_line PROTO((FILE *, rtx));
-static rtx walk_alter_subreg PROTO((rtx));
-static void output_asm_name PROTO((void));
-static void output_operand PROTO((rtx, int));
+static int asm_insn_count PARAMS ((rtx));
+#endif
+static void profile_function PARAMS ((FILE *));
+static void profile_after_prologue PARAMS ((FILE *));
+static void add_bb PARAMS ((FILE *));
+static int add_bb_string PARAMS ((const char *, int));
+static void output_source_line PARAMS ((FILE *, rtx));
+static rtx walk_alter_subreg PARAMS ((rtx));
+static void output_asm_name PARAMS ((void));
+static void output_operand PARAMS ((rtx, int));
#ifdef LEAF_REGISTERS
-static void leaf_renumber_regs PROTO((rtx));
+static void leaf_renumber_regs PARAMS ((rtx));
#endif
#ifdef HAVE_cc0
-static int alter_cond PROTO((rtx));
+static int alter_cond PARAMS ((rtx));
+#endif
+#ifndef ADDR_VEC_ALIGN
+static int final_addr_vec_align PARAMS ((rtx));
+#endif
+#ifdef HAVE_ATTR_length
+static int align_fuzz PARAMS ((rtx, rtx, int, unsigned));
#endif
-
-extern char *getpwd ();
\f
/* Initialize data in final at the beginning of a compilation. */
init_final (filename)
const char *filename ATTRIBUTE_UNUSED;
{
- next_block_index = 2;
app_on = 0;
- max_block_depth = 20;
- pending_blocks = (int *) xmalloc (20 * sizeof *pending_blocks);
final_sequence = 0;
#ifdef ASSEMBLER_DIALECT
void
end_final (filename)
- const char *filename;
+ const char *filename;
{
int i;
if (profile_block_flag)
size = long_bytes * count_basic_blocks;
else
- size = long_bytes * count_instrumented_arcs;
+ size = long_bytes * count_instrumented_edges;
rounded = size;
rounded += (BIGGEST_ALIGNMENT / BITS_PER_UNIT) - 1;
if (profile_block_flag)
assemble_integer (GEN_INT (count_basic_blocks), long_bytes, 1);
else
- assemble_integer (GEN_INT (count_instrumented_arcs), long_bytes,
- 1);
+ assemble_integer (GEN_INT (count_instrumented_edges), long_bytes, 1);
/* zero word (link field) */
assemble_integer (const0_rtx, pointer_bytes, 1);
if (write_symbols != NO_DEBUG && profile_block_flag)
{
ASM_GENERATE_INTERNAL_LABEL (name, "LPBX", 5);
- assemble_integer (gen_rtx_SYMBOL_REF (Pmode, name), pointer_bytes, 1);
+ assemble_integer (gen_rtx_SYMBOL_REF (Pmode, name),
+ pointer_bytes, 1);
ASM_GENERATE_INTERNAL_LABEL (name, "LPBX", 6);
- assemble_integer (gen_rtx_SYMBOL_REF (Pmode, name), pointer_bytes, 1);
+ assemble_integer (gen_rtx_SYMBOL_REF (Pmode, name),
+ pointer_bytes, 1);
}
else
{
else
#endif
#ifdef ASM_OUTPUT_ALIGNED_DECL_LOCAL
- ASM_OUTPUT_ALIGNED_DECL_LOCAL (asm_out_file, NULL_TREE, name, size,
- BIGGEST_ALIGNMENT);
+ ASM_OUTPUT_ALIGNED_DECL_LOCAL (asm_out_file, NULL_TREE, name,
+ size, BIGGEST_ALIGNMENT);
#else
#ifdef ASM_OUTPUT_ALIGNED_LOCAL
ASM_OUTPUT_ALIGNED_LOCAL (asm_out_file, name, size,
assemble_integer (const0_rtx, pointer_bytes, 1);
}
- for ( ; i < count_basic_blocks; i++)
+ for (; i < count_basic_blocks; i++)
assemble_integer (const0_rtx, pointer_bytes, 1);
}
for ((ptr = bb_head), (i = 0); ptr != 0; (ptr = ptr->next), i++)
assemble_integer (GEN_INT (ptr->line_num), long_bytes, 1);
- for ( ; i < count_basic_blocks; i++)
+ for (; i < count_basic_blocks; i++)
assemble_integer (const0_rtx, long_bytes, 1);
/* Output the table of file names. */
assemble_integer (const0_rtx, pointer_bytes, 1);
}
- for ( ; i < count_basic_blocks; i++)
+ for (; i < count_basic_blocks; i++)
assemble_integer (const0_rtx, pointer_bytes, 1);
}
}
}
\f
-/* Return the number of slots filled in the current
+/* Return the number of slots filled in the current
delayed branch sequence (we don't count the insn needing the
delay slot). Zero if not in a delayed branch sequence. */
`insn_current_length'. */
static short *insn_lengths;
-int *insn_addresses;
+
+#ifdef HAVE_ATTR_length
+varray_type insn_addresses_;
+#endif
/* Max uid for which the above arrays are valid. */
static int insn_lengths_max_uid;
for each insn we'll call the alignment chain of this insn in the following
comments. */
-struct label_alignment {
+struct label_alignment
+{
short alignment;
short max_skip;
};
insn_lengths = 0;
insn_lengths_max_uid = 0;
}
- if (insn_addresses)
- {
- free (insn_addresses);
- insn_addresses = 0;
- }
+#ifdef HAVE_ATTR_length
+ INSN_ADDRESSES_FREE ();
+#endif
if (uid_align)
{
free (uid_align);
int
get_attr_length (insn)
- rtx insn;
+ rtx insn ATTRIBUTE_UNUSED;
{
#ifdef HAVE_ATTR_length
rtx body;
Call a sequence of instructions beginning with alignment point X
and continuing until the next alignment point `block X'. When `X'
- is used in an expression, it means the alignment value of the
+ is used in an expression, it means the alignment value of the
alignment point.
-
+
Call the distance between the start of the first insn of block X, and
the end of the last insn of block X `IX', for the `inner size of X'.
This is clearly the sum of the instruction lengths.
-
+
Likewise with the next alignment-delimited block following X, which we
shall call block Y.
-
+
Call the distance between the start of the first insn of block X, and
the start of the first insn of block Y `OX', for the `outer size of X'.
-
+
The estimated padding is then OX - IX.
-
+
OX can be safely estimated as
-
+
if (X >= Y)
OX = round_up(IX, Y)
else
OX = round_up(IX, X) + Y - X
-
+
Clearly est(IX) >= real(IX), because that only depends on the
instruction lengths, and those being overestimated is a given.
-
+
Clearly round_up(foo, Z) >= round_up(bar, Z) if foo >= bar, so
we needn't worry about that when thinking about OX.
-
+
When X >= Y, the alignment provided by Y adds no uncertainty factor
for branch ranges starting before X, so we can just round what we have.
But when X < Y, we don't know anything about the, so to speak,
address mod X to one mod Y, which is Y - X. */
#ifndef LABEL_ALIGN
-#define LABEL_ALIGN(LABEL) 0
+#define LABEL_ALIGN(LABEL) align_labels_log
#endif
#ifndef LABEL_ALIGN_MAX_SKIP
-#define LABEL_ALIGN_MAX_SKIP 0
+#define LABEL_ALIGN_MAX_SKIP (align_labels-1)
#endif
#ifndef LOOP_ALIGN
-#define LOOP_ALIGN(LABEL) 0
+#define LOOP_ALIGN(LABEL) align_loops_log
#endif
#ifndef LOOP_ALIGN_MAX_SKIP
-#define LOOP_ALIGN_MAX_SKIP 0
+#define LOOP_ALIGN_MAX_SKIP (align_loops-1)
#endif
#ifndef LABEL_ALIGN_AFTER_BARRIER
-#define LABEL_ALIGN_AFTER_BARRIER(LABEL) 0
+#define LABEL_ALIGN_AFTER_BARRIER(LABEL) align_jumps_log
#endif
#ifndef LABEL_ALIGN_AFTER_BARRIER_MAX_SKIP
-#define LABEL_ALIGN_AFTER_BARRIER_MAX_SKIP 0
+#define LABEL_ALIGN_AFTER_BARRIER_MAX_SKIP (align_jumps-1)
#endif
#ifndef ADDR_VEC_ALIGN
-int
+static int
final_addr_vec_align (addr_vec)
rtx addr_vec;
{
- int align = exact_log2 (GET_MODE_SIZE (GET_MODE (PATTERN (addr_vec))));
+ int align = GET_MODE_SIZE (GET_MODE (PATTERN (addr_vec)));
if (align > BIGGEST_ALIGNMENT / BITS_PER_UNIT)
align = BIGGEST_ALIGNMENT / BITS_PER_UNIT;
- return align;
+ return exact_log2 (align);
}
+
#define ADDR_VEC_ALIGN(ADDR_VEC) final_addr_vec_align (ADDR_VEC)
#endif
(label_align[CODE_LABEL_NUMBER (LABEL) - min_labelno].max_skip)
/* For the benefit of port specific code do this also as a function. */
+
int
label_to_alignment (label)
rtx label;
For this purpose, align_fuzz with a growth argument of 0 comuptes the
appropriate adjustment. */
-
/* Compute the maximum delta by which the difference of the addresses of
START and END might grow / shrink due to a different address for start
which changes the size of alignment insns between START and END.
GROWTH should be ~0 if the objective is to compute potential code size
increase, and 0 if the objective is to compute potential shrink.
The return value is undefined for any other value of GROWTH. */
-int
+
+static int
align_fuzz (start, end, known_align_log, growth)
rtx start, end;
int known_align_log;
int align_addr, new_align;
uid = INSN_UID (align_label);
- align_addr = insn_addresses[uid] - insn_lengths[uid];
+ align_addr = INSN_ADDRESSES (uid) - insn_lengths[uid];
if (uid_shuid[uid] > end_shuid)
break;
known_align_log = LABEL_TO_ALIGNMENT (align_label);
to account for possible size increase due to alignment.
NB.: Therefore, the maximum offset allowed for backward branches needs
to exclude the branch size. */
+
int
insn_current_reference_address (branch)
rtx branch;
{
- rtx dest;
- rtx seq = NEXT_INSN (PREV_INSN (branch));
- int seq_uid = INSN_UID (seq);
+ rtx dest, seq;
+ int seq_uid;
+
+ if (! INSN_ADDRESSES_SET_P ())
+ return 0;
+
+ seq = NEXT_INSN (PREV_INSN (branch));
+ seq_uid = INSN_UID (seq);
if (GET_CODE (branch) != JUMP_INSN)
/* This can happen for example on the PA; the objective is to know the
offset to address something in front of the start of the function.
any alignment we'd encounter, so we skip the call to align_fuzz. */
return insn_current_address;
dest = JUMP_LABEL (branch);
- /* BRANCH has no proper alignment chain set, so use SEQ. */
- if (INSN_SHUID (branch) < INSN_SHUID (dest))
+
+ /* BRANCH has no proper alignment chain set, so use SEQ.
+ BRANCH also has no INSN_SHUID. */
+ if (INSN_SHUID (seq) < INSN_SHUID (dest))
{
- /* Forward branch. */
+ /* Forward branch. */
return (insn_last_address + insn_lengths[seq_uid]
- align_fuzz (seq, dest, length_unit_log, ~0));
}
else
{
- /* Backward branch. */
+ /* Backward branch. */
return (insn_current_address
+ align_fuzz (dest, seq, length_unit_log, ~0));
}
void
shorten_branches (first)
- rtx first;
+ rtx first ATTRIBUTE_UNUSED;
{
rtx insn;
int max_uid;
we must split them before we compute the address/length info. */
for (insn = NEXT_INSN (first); insn; insn = NEXT_INSN (insn))
- if (GET_RTX_CLASS (GET_CODE (insn)) == 'i')
+ if (INSN_P (insn))
{
rtx old = insn;
/* Don't split the insn if it has been deleted. */
with only the 'deleted' bit set. Transform it into a note
to avoid confusion of subsequent processing. */
if (INSN_DELETED_P (old))
- {
- PUT_CODE (old , NOTE);
- NOTE_LINE_NUMBER (old) = NOTE_INSN_DELETED;
- NOTE_SOURCE_FILE (old) = 0;
- }
+ {
+ PUT_CODE (old, NOTE);
+ NOTE_LINE_NUMBER (old) = NOTE_INSN_DELETED;
+ NOTE_SOURCE_FILE (old) = 0;
+ }
}
#endif
max_labelno = max_label_num ();
min_labelno = get_first_label_num ();
- label_align = (struct label_alignment *) xmalloc (
- (max_labelno - min_labelno + 1) * sizeof (struct label_alignment));
- bzero ((char *) label_align,
- (max_labelno - min_labelno + 1) * sizeof (struct label_alignment));
+ label_align = (struct label_alignment *)
+ xcalloc ((max_labelno - min_labelno + 1), sizeof (struct label_alignment));
uid_shuid = (int *) xmalloc (max_uid * sizeof *uid_shuid);
/* We use max_log here to keep track of the maximum alignment we want to
impose on the next CODE_LABEL (or the current one if we are processing
the CODE_LABEL itself). */
-
+
max_log = 0;
max_skip = 0;
int log;
INSN_SHUID (insn) = i++;
- if (GET_RTX_CLASS (GET_CODE (insn)) == 'i')
+ if (INSN_P (insn))
{
/* reorg might make the first insn of a loop being run once only,
and delete the label in front of it. Then we want to apply
{
rtx label;
- for (label = insn; label && GET_RTX_CLASS (GET_CODE (label)) != 'i';
+ for (label = insn; label && ! INSN_P (label);
label = NEXT_INSN (label))
if (GET_CODE (label) == CODE_LABEL)
{
break;
else if (GET_CODE (label) == CODE_LABEL)
{
- log = LOOP_ALIGN (insn);
+ log = LOOP_ALIGN (label);
if (max_log < log)
{
max_log = log;
/* Allocate the rest of the arrays. */
insn_lengths = (short *) xmalloc (max_uid * sizeof (short));
- insn_addresses = (int *) xmalloc (max_uid * sizeof (int));
insn_lengths_max_uid = max_uid;
/* Syntax errors can lead to labels being outside of the main insn stream.
Initialize insn_addresses, so that we get reproducible results. */
- bzero ((char *)insn_addresses, max_uid * sizeof *insn_addresses);
- uid_align = (rtx *) xmalloc (max_uid * sizeof *uid_align);
+ INSN_ADDRESSES_ALLOC (max_uid);
- varying_length = (char *) xmalloc (max_uid * sizeof (char));
-
- bzero (varying_length, max_uid);
+ varying_length = (char *) xcalloc (max_uid, sizeof (char));
/* Initialize uid_align. We scan instructions
from end to start, and keep in align_tab[n] the last seen insn
that does an alignment of at least n+1, i.e. the successor
in the alignment chain for an insn that does / has a known
alignment of n. */
+ uid_align = (rtx *) xcalloc (max_uid, sizeof *uid_align);
- bzero ((char *) uid_align, max_uid * sizeof *uid_align);
-
- for (i = MAX_CODE_ALIGN; --i >= 0; )
+ for (i = MAX_CODE_ALIGN; --i >= 0;)
align_tab[i] = NULL_RTX;
seq = get_last_insn ();
for (; seq; seq = PREV_INSN (seq))
}
#endif /* CASE_VECTOR_SHORTEN_MODE */
-
/* Compute initial lengths, addresses, and varying flags for each insn. */
for (insn_current_address = FIRST_INSN_ADDRESS, insn = first;
insn != 0;
int align = 1 << log;
int new_address = (insn_current_address + align - 1) & -align;
insn_lengths[uid] = new_address - insn_current_address;
- insn_current_address = new_address;
}
}
- insn_addresses[uid] = insn_current_address;
-
+ INSN_ADDRESSES (uid) = insn_current_address;
+
if (GET_CODE (insn) == NOTE || GET_CODE (insn) == BARRIER
|| GET_CODE (insn) == CODE_LABEL)
continue;
* GET_MODE_SIZE (GET_MODE (body)));
/* Alignment is handled by ADDR_VEC_ALIGN. */
}
- else if (asm_noperands (body) >= 0)
+ else if (GET_CODE (body) == ASM_INPUT || asm_noperands (body) >= 0)
insn_lengths[uid] = asm_insn_count (body) * insn_default_length (insn);
else if (GET_CODE (body) == SEQUENCE)
{
int inner_uid = INSN_UID (inner_insn);
int inner_length;
- if (asm_noperands (PATTERN (XVECEXP (body, 0, i))) >= 0)
+ if (GET_CODE (body) == ASM_INPUT
+ || asm_noperands (PATTERN (XVECEXP (body, 0, i))) >= 0)
inner_length = (asm_insn_count (PATTERN (inner_insn))
* insn_default_length (inner_insn));
else
inner_length = insn_default_length (inner_insn);
-
+
insn_lengths[inner_uid] = inner_length;
if (const_delay_slots)
{
if ((varying_length[inner_uid]
= insn_variable_length_p (inner_insn)) != 0)
varying_length[uid] = 1;
- insn_addresses[inner_uid] = (insn_current_address +
- insn_lengths[uid]);
+ INSN_ADDRESSES (inner_uid) = (insn_current_address
+ + insn_lengths[uid]);
}
else
varying_length[inner_uid] = 0;
}
else
insn_lengths[uid] = 0;
- insn_addresses[uid] = insn_current_address;
+ INSN_ADDRESSES (uid) = insn_current_address;
continue;
}
if (length_align < insn_current_align)
insn_current_align = length_align;
- insn_last_address = insn_addresses[uid];
- insn_addresses[uid] = insn_current_address;
+ insn_last_address = INSN_ADDRESSES (uid);
+ INSN_ADDRESSES (uid) = insn_current_address;
#ifdef CASE_VECTOR_SHORTEN_MODE
if (optimize && GET_CODE (insn) == JUMP_INSN
rtx min_lab = XEXP (XEXP (body, 2), 0);
rtx max_lab = XEXP (XEXP (body, 3), 0);
addr_diff_vec_flags flags = ADDR_DIFF_VEC_FLAGS (body);
- int rel_addr = insn_addresses[INSN_UID (rel_lab)];
- int min_addr = insn_addresses[INSN_UID (min_lab)];
- int max_addr = insn_addresses[INSN_UID (max_lab)];
+ int rel_addr = INSN_ADDRESSES (INSN_UID (rel_lab));
+ int min_addr = INSN_ADDRESSES (INSN_UID (min_lab));
+ int max_addr = INSN_ADDRESSES (INSN_UID (max_lab));
rtx prev;
int rel_align = 0;
if (GET_CODE (insn) == INSN && GET_CODE (PATTERN (insn)) == SEQUENCE)
{
int i;
-
+
body = PATTERN (insn);
new_length = 0;
for (i = 0; i < XVECLEN (body, 0); i++)
int inner_uid = INSN_UID (inner_insn);
int inner_length;
- insn_addresses[inner_uid] = insn_current_address;
+ INSN_ADDRESSES (inner_uid) = insn_current_address;
/* insn_current_length returns 0 for insns with a
non-varying length. */
asm_insn_count (body)
rtx body;
{
- char *template;
+ const char *template;
int count = 1;
if (GET_CODE (body) == ASM_INPUT)
template = XSTR (body, 0);
else
- template = decode_asm_operands (body, NULL_PTR, NULL_PTR,
- NULL_PTR, NULL_PTR);
+ template = decode_asm_operands (body, NULL, NULL, NULL, NULL);
- for ( ; *template; template++)
- if (IS_ASM_LOGICAL_LINE_SEPARATOR(*template) || *template == '\n')
+ for (; *template; template++)
+ if (IS_ASM_LOGICAL_LINE_SEPARATOR (*template) || *template == '\n')
count++;
return count;
regs_ever_live[i] = 1;
}
#endif
-
+
/* Initial line number is supposed to be output
before the function's prologue and label
so that the function's address will not appear to be
last_linenum = high_block_linenum = high_function_linenum
= NOTE_LINE_NUMBER (first);
-#if defined (DWARF2_UNWIND_INFO) || defined (DWARF2_DEBUGGING_INFO)
- /* Output DWARF definition of the function. */
- if (dwarf2out_do_frame ())
- dwarf2out_begin_prologue ();
+#if defined (DWARF2_UNWIND_INFO) || defined (IA64_UNWIND_INFO) \
+ || defined (DWARF2_DEBUGGING_INFO)
+ dwarf2out_begin_prologue ();
#endif
/* For SDB and XCOFF, the function beginning must be marked between
if (write_symbols == XCOFF_DEBUG)
xcoffout_begin_function (file, last_linenum);
else
-#endif
+#endif
/* But only output line number for other debug info types if -g2
or better. */
if (NOTE_LINE_NUMBER (first) != NOTE_INSN_DELETED)
dwarf2out_frame_debug (NULL_RTX);
#endif
+ /* If debugging, assign block numbers to all of the blocks in this
+ function. */
+ if (write_symbols)
+ {
+ number_blocks (current_function_decl);
+ remove_unnecessary_notes ();
+ /* We never actually put out begin/end notes for the top-level
+ block in the function. But, conceptually, that block is
+ always needed. */
+ TREE_ASM_WRITTEN (DECL_INITIAL (current_function_decl)) = 1;
+ }
+
#ifdef FUNCTION_PROLOGUE
/* First output the function prologue: code to set up the stack frame. */
FUNCTION_PROLOGUE (file, get_frame_size ());
#endif
-#if defined (SDB_DEBUGGING_INFO) || defined (XCOFF_DEBUGGING_INFO)
- if (write_symbols == SDB_DEBUG || write_symbols == XCOFF_DEBUG)
- next_block_index = 1;
-#endif
-
/* If the machine represents the prologue as RTL, the profiling code must
be emitted when NOTE_INSN_PROLOGUE_END is scanned. */
#ifdef HAVE_prologue
of the function name. */
if (profile_block_flag)
{
- bb_func_label_num
- = add_bb_string ((*decl_printable_name) (current_function_decl, 2), FALSE);
+ bb_func_label_num =
+ add_bb_string ((*decl_printable_name) (current_function_decl, 2),
+ FALSE);
}
}
static void
profile_after_prologue (file)
- FILE *file;
+ FILE *file ATTRIBUTE_UNUSED;
{
#ifdef FUNCTION_BLOCK_PROFILER
if (profile_block_flag)
profile_function (file)
FILE *file;
{
+#ifndef NO_PROFILE_COUNTERS
int align = MIN (BIGGEST_ALIGNMENT, LONG_TYPE_SIZE);
+#endif
#if defined(ASM_OUTPUT_REG_PUSH)
#if defined(STRUCT_VALUE_INCOMING_REGNUM) || defined(STRUCT_VALUE_REGNUM)
int sval = current_function_returns_struct;
#endif
#endif /* ASM_OUTPUT_REG_PUSH */
+#ifndef NO_PROFILE_COUNTERS
data_section ();
ASM_OUTPUT_ALIGN (file, floor_log2 (align / BITS_PER_UNIT));
ASM_OUTPUT_INTERNAL_LABEL (file, "LP", profile_label_no);
assemble_integer (const0_rtx, LONG_TYPE_SIZE / BITS_PER_UNIT, 1);
+#endif
function_section (current_function_decl);
void
final_end_function (first, file, optimize)
rtx first ATTRIBUTE_UNUSED;
- FILE *file;
+ FILE *file ATTRIBUTE_UNUSED;
int optimize ATTRIBUTE_UNUSED;
{
- if (app_on)
- {
- fputs (ASM_APP_OFF, file);
- app_on = 0;
- }
+ app_disable ();
#ifdef SDB_DEBUGGING_INFO
if (write_symbols == SDB_DEBUG)
add_bb (file)
FILE *file;
{
- struct bb_list *ptr = (struct bb_list *) permalloc (sizeof (struct bb_list));
+ struct bb_list *ptr =
+ (struct bb_list *) permalloc (sizeof (struct bb_list));
/* Add basic block to linked list. */
ptr->next = 0;
if (!perm_p)
{
char *p = (char *) permalloc (len);
- bcopy (string, p, len);
+ memcpy (p, string, len);
string = p;
}
else
return ptr->label_num;
}
-
\f
/* Output assembler code for some insns: all or part of a function.
For description of args, see `final_start_function', above.
last_ignored_compare = 0;
new_block = 1;
- check_exception_handler_labels ();
-
/* Make a map indicating which line numbers appear in this function.
When producing SDB debugging info, delete troublesome line number
notes from inlined functions in other files as well as duplicate
max_line = NOTE_LINE_NUMBER (insn);
}
- line_note_exists = (char *) oballoc (max_line + 1);
- bzero (line_note_exists, max_line + 1);
+ line_note_exists = (char *) xcalloc (max_line + 1, sizeof (char));
for (insn = first; insn; insn = NEXT_INSN (insn))
{
if (INSN_UID (insn) > max_uid) /* find largest UID */
- max_uid = INSN_UID (insn);
+ max_uid = INSN_UID (insn);
if (GET_CODE (insn) == NOTE && NOTE_LINE_NUMBER (insn) > 0)
- line_note_exists[NOTE_LINE_NUMBER (insn)] = 1;
+ line_note_exists[NOTE_LINE_NUMBER (insn)] = 1;
#ifdef HAVE_cc0
/* If CC tracking across branches is enabled, record the insn which
jumps to each branch only reached from one place. */
#endif
}
- /* Initialize insn_eh_region table if eh is being used. */
-
- init_insn_eh_region (first, max_uid);
-
init_recog ();
CC_STATUS_INIT;
for (insn = NEXT_INSN (first); insn;)
{
#ifdef HAVE_ATTR_length
- insn_current_address = insn_addresses[INSN_UID (insn)];
+ if (INSN_UID (insn) >= INSN_ADDRESSES_SIZE ())
+ {
+#ifdef STACK_REGS
+ /* Irritatingly, the reg-stack pass is creating new instructions
+ and because of REG_DEAD note abuse it has to run after
+ shorten_branches. Fake address of -1 then. */
+ insn_current_address = -1;
+#else
+ /* This can be triggered by bugs elsewhere in the compiler if
+ new insns are created after init_insn_lengths is called. */
+ abort ();
#endif
+ }
+ else
+ insn_current_address = INSN_ADDRESSES (INSN_UID (insn));
+#endif /* HAVE_ATTR_length */
+
insn = final_scan_insn (insn, file, optimize, prescan, 0);
}
if (profile_block_flag && new_block)
add_bb (file);
- free_insn_eh_region ();
+ free (line_note_exists);
+ line_note_exists = NULL;
}
\f
+const char *
+get_insn_template (code, insn)
+ int code;
+ rtx insn;
+{
+ const void *output = insn_data[code].output;
+ switch (insn_data[code].output_format)
+ {
+ case INSN_OUTPUT_FORMAT_SINGLE:
+ return (const char *) output;
+ case INSN_OUTPUT_FORMAT_MULTI:
+ return ((const char *const *) output)[which_alternative];
+ case INSN_OUTPUT_FORMAT_FUNCTION:
+ if (insn == NULL)
+ abort ();
+ return (*(insn_output_fn) output) (recog_data.operand, insn);
+
+ default:
+ abort ();
+ }
+}
+
/* The final scan for one insn, INSN.
Args are same as in `final', except that INSN
is the insn being scanned.
final_scan_insn (insn, file, optimize, prescan, nopeepholes)
rtx insn;
FILE *file;
- int optimize;
+ int optimize ATTRIBUTE_UNUSED;
int prescan;
- int nopeepholes;
+ int nopeepholes ATTRIBUTE_UNUSED;
{
#ifdef HAVE_cc0
rtx set;
if (prescan > 0)
break;
- /* Align the beginning of a loop, for higher speed
- on certain machines. */
-
- if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_BEG)
- break; /* This used to depend on optimize, but that was bogus. */
- if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_END)
- break;
-
- if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_EH_REGION_BEG
- && ! exceptions_via_longjmp)
+ switch (NOTE_LINE_NUMBER (insn))
{
- ASM_OUTPUT_INTERNAL_LABEL (file, "LEHB", NOTE_BLOCK_NUMBER (insn));
- if (! flag_new_exceptions)
- add_eh_table_entry (NOTE_BLOCK_NUMBER (insn));
-#ifdef ASM_OUTPUT_EH_REGION_BEG
- ASM_OUTPUT_EH_REGION_BEG (file, NOTE_BLOCK_NUMBER (insn));
-#endif
+ case NOTE_INSN_DELETED:
+ case NOTE_INSN_LOOP_BEG:
+ case NOTE_INSN_LOOP_END:
+ case NOTE_INSN_LOOP_CONT:
+ case NOTE_INSN_LOOP_VTOP:
+ case NOTE_INSN_FUNCTION_END:
+ case NOTE_INSN_SETJMP:
+ case NOTE_INSN_REPEATED_LINE_NUMBER:
+ case NOTE_INSN_RANGE_BEG:
+ case NOTE_INSN_RANGE_END:
+ case NOTE_INSN_LIVE:
+ case NOTE_INSN_EXPECTED_VALUE:
break;
- }
- if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_EH_REGION_END
- && ! exceptions_via_longjmp)
- {
- ASM_OUTPUT_INTERNAL_LABEL (file, "LEHE", NOTE_BLOCK_NUMBER (insn));
- if (flag_new_exceptions)
- add_eh_table_entry (NOTE_BLOCK_NUMBER (insn));
-#ifdef ASM_OUTPUT_EH_REGION_END
- ASM_OUTPUT_EH_REGION_END (file, NOTE_BLOCK_NUMBER (insn));
+ case NOTE_INSN_BASIC_BLOCK:
+#ifdef IA64_UNWIND_INFO
+ IA64_UNWIND_EMIT (asm_out_file, insn);
#endif
+ if (flag_debug_asm)
+ fprintf (asm_out_file, "\t%s basic block %d\n",
+ ASM_COMMENT_START, NOTE_BASIC_BLOCK (insn)->index);
break;
- }
- if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_PROLOGUE_END)
- {
+ case NOTE_INSN_EH_REGION_BEG:
+ ASM_OUTPUT_DEBUG_LABEL (asm_out_file, "LEHB",
+ NOTE_EH_HANDLER (insn));
+ break;
+
+ case NOTE_INSN_EH_REGION_END:
+ ASM_OUTPUT_DEBUG_LABEL (asm_out_file, "LEHE",
+ NOTE_EH_HANDLER (insn));
+ break;
+
+ case NOTE_INSN_PROLOGUE_END:
#ifdef FUNCTION_END_PROLOGUE
FUNCTION_END_PROLOGUE (file);
#endif
profile_after_prologue (file);
break;
- }
+ case NOTE_INSN_EPILOGUE_BEG:
#ifdef FUNCTION_BEGIN_EPILOGUE
- if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_EPILOGUE_BEG)
- {
FUNCTION_BEGIN_EPILOGUE (file);
- break;
- }
#endif
+ break;
- if (write_symbols == NO_DEBUG)
- break;
- if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_FUNCTION_BEG)
- {
+ case NOTE_INSN_FUNCTION_BEG:
#if defined(SDB_DEBUGGING_INFO) && defined(MIPS_DEBUGGING_INFO)
/* MIPS stabs require the parameter descriptions to be after the
function entry point rather than before. */
if (write_symbols == SDB_DEBUG)
- sdbout_begin_function (last_linenum);
- else
+ {
+ app_disable ();
+ sdbout_begin_function (last_linenum);
+ }
#endif
#ifdef DWARF_DEBUGGING_INFO
/* This outputs a marker where the function body starts, so it
must be after the prologue. */
if (write_symbols == DWARF_DEBUG)
- dwarfout_begin_function ();
+ {
+ app_disable ();
+ dwarfout_begin_function ();
+ }
#endif
break;
- }
- if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_DELETED)
- break; /* An insn that was "deleted" */
- if (app_on)
- {
- fputs (ASM_APP_OFF, file);
- app_on = 0;
- }
- if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_BLOCK_BEG
- && (debug_info_level == DINFO_LEVEL_NORMAL
+
+ case NOTE_INSN_BLOCK_BEG:
+ if (debug_info_level == DINFO_LEVEL_NORMAL
|| debug_info_level == DINFO_LEVEL_VERBOSE
|| write_symbols == DWARF_DEBUG
- || write_symbols == DWARF2_DEBUG))
- {
- /* Beginning of a symbol-block. Assign it a sequence number
- and push the number onto the stack PENDING_BLOCKS. */
-
- if (block_depth == max_block_depth)
+ || write_symbols == DWARF2_DEBUG)
{
- /* PENDING_BLOCKS is full; make it longer. */
- max_block_depth *= 2;
- pending_blocks
- = (int *) xrealloc (pending_blocks,
- max_block_depth * sizeof (int));
- }
- pending_blocks[block_depth++] = next_block_index;
-
- high_block_linenum = last_linenum;
+ int n = BLOCK_NUMBER (NOTE_BLOCK (insn));
- /* Output debugging info about the symbol-block beginning. */
+ app_disable ();
+ ++block_depth;
+ high_block_linenum = last_linenum;
+ /* Output debugging info about the symbol-block beginning. */
#ifdef SDB_DEBUGGING_INFO
- if (write_symbols == SDB_DEBUG)
- sdbout_begin_block (file, last_linenum, next_block_index);
+ if (write_symbols == SDB_DEBUG)
+ sdbout_begin_block (file, last_linenum, n);
#endif
#ifdef XCOFF_DEBUGGING_INFO
- if (write_symbols == XCOFF_DEBUG)
- xcoffout_begin_block (file, last_linenum, next_block_index);
+ if (write_symbols == XCOFF_DEBUG)
+ xcoffout_begin_block (file, last_linenum, n);
#endif
#ifdef DBX_DEBUGGING_INFO
- if (write_symbols == DBX_DEBUG)
- ASM_OUTPUT_INTERNAL_LABEL (file, "LBB", next_block_index);
+ if (write_symbols == DBX_DEBUG)
+ ASM_OUTPUT_INTERNAL_LABEL (file, "LBB", n);
#endif
#ifdef DWARF_DEBUGGING_INFO
- if (write_symbols == DWARF_DEBUG)
- dwarfout_begin_block (next_block_index);
+ if (write_symbols == DWARF_DEBUG)
+ dwarfout_begin_block (n);
#endif
#ifdef DWARF2_DEBUGGING_INFO
- if (write_symbols == DWARF2_DEBUG)
- dwarf2out_begin_block (next_block_index);
+ if (write_symbols == DWARF2_DEBUG)
+ dwarf2out_begin_block (n);
#endif
- next_block_index++;
- }
- else if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_BLOCK_END
- && (debug_info_level == DINFO_LEVEL_NORMAL
- || debug_info_level == DINFO_LEVEL_VERBOSE
- || write_symbols == DWARF_DEBUG
- || write_symbols == DWARF2_DEBUG))
- {
- /* End of a symbol-block. Pop its sequence number off
- PENDING_BLOCKS and output debugging info based on that. */
+ /* Mark this block as output. */
+ TREE_ASM_WRITTEN (NOTE_BLOCK (insn)) = 1;
+ }
+ break;
- --block_depth;
- if (block_depth < 0)
- abort ();
+ case NOTE_INSN_BLOCK_END:
+ if (debug_info_level == DINFO_LEVEL_NORMAL
+ || debug_info_level == DINFO_LEVEL_VERBOSE
+ || write_symbols == DWARF_DEBUG
+ || write_symbols == DWARF2_DEBUG)
+ {
+ int n = BLOCK_NUMBER (NOTE_BLOCK (insn));
+
+ app_disable ();
+
+ /* End of a symbol-block. */
+ --block_depth;
+ if (block_depth < 0)
+ abort ();
#ifdef XCOFF_DEBUGGING_INFO
- if (write_symbols == XCOFF_DEBUG)
- xcoffout_end_block (file, high_block_linenum,
- pending_blocks[block_depth]);
+ if (write_symbols == XCOFF_DEBUG)
+ xcoffout_end_block (file, high_block_linenum, n);
#endif
#ifdef DBX_DEBUGGING_INFO
- if (write_symbols == DBX_DEBUG)
- ASM_OUTPUT_INTERNAL_LABEL (file, "LBE",
- pending_blocks[block_depth]);
+ if (write_symbols == DBX_DEBUG)
+ ASM_OUTPUT_INTERNAL_LABEL (file, "LBE", n);
#endif
#ifdef SDB_DEBUGGING_INFO
- if (write_symbols == SDB_DEBUG)
- sdbout_end_block (file, high_block_linenum,
- pending_blocks[block_depth]);
+ if (write_symbols == SDB_DEBUG)
+ sdbout_end_block (file, high_block_linenum, n);
#endif
#ifdef DWARF_DEBUGGING_INFO
- if (write_symbols == DWARF_DEBUG)
- dwarfout_end_block (pending_blocks[block_depth]);
-#endif
-#ifdef DWARF2_DEBUGGING_INFO
- if (write_symbols == DWARF2_DEBUG)
- dwarf2out_end_block (pending_blocks[block_depth]);
-#endif
- }
- else if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_DELETED_LABEL
- && (debug_info_level == DINFO_LEVEL_NORMAL
- || debug_info_level == DINFO_LEVEL_VERBOSE))
- {
-#ifdef DWARF_DEBUGGING_INFO
- if (write_symbols == DWARF_DEBUG)
- dwarfout_label (insn);
+ if (write_symbols == DWARF_DEBUG)
+ dwarfout_end_block (n);
#endif
#ifdef DWARF2_DEBUGGING_INFO
- if (write_symbols == DWARF2_DEBUG)
- dwarf2out_label (insn);
+ if (write_symbols == DWARF2_DEBUG)
+ dwarf2out_end_block (n);
#endif
- }
- else if (NOTE_LINE_NUMBER (insn) > 0)
- /* This note is a line-number. */
- {
- register rtx note;
+ }
+ break;
-#if 0 /* This is what we used to do. */
- output_source_line (file, insn);
-#endif
- int note_after = 0;
+ case NOTE_INSN_DELETED_LABEL:
+ /* Emit the label. We may have deleted the CODE_LABEL because
+ the label could be proved to be unreachable, though still
+ referenced (in the form of having its address taken. */
+ ASM_OUTPUT_DEBUG_LABEL (file, "L", CODE_LABEL_NUMBER (insn));
+ break;
- /* If there is anything real after this note,
- output it. If another line note follows, omit this one. */
- for (note = NEXT_INSN (insn); note; note = NEXT_INSN (note))
- {
- if (GET_CODE (note) != NOTE && GET_CODE (note) != CODE_LABEL)
- break;
- /* These types of notes can be significant
- so make sure the preceding line number stays. */
- else if (GET_CODE (note) == NOTE
- && (NOTE_LINE_NUMBER (note) == NOTE_INSN_BLOCK_BEG
- || NOTE_LINE_NUMBER (note) == NOTE_INSN_BLOCK_END
- || NOTE_LINE_NUMBER (note) == NOTE_INSN_FUNCTION_BEG))
- break;
- else if (GET_CODE (note) == NOTE && NOTE_LINE_NUMBER (note) > 0)
- {
- /* Another line note follows; we can delete this note
- if no intervening line numbers have notes elsewhere. */
- int num;
- for (num = NOTE_LINE_NUMBER (insn) + 1;
- num < NOTE_LINE_NUMBER (note);
- num++)
- if (line_note_exists[num])
- break;
-
- if (num >= NOTE_LINE_NUMBER (note))
- note_after = 1;
+ case 0:
+ break;
+
+ default:
+ if (NOTE_LINE_NUMBER (insn) <= 0)
+ abort ();
+
+ /* This note is a line-number. */
+ {
+ register rtx note;
+ int note_after = 0;
+
+ /* If there is anything real after this note, output it.
+ If another line note follows, omit this one. */
+ for (note = NEXT_INSN (insn); note; note = NEXT_INSN (note))
+ {
+ if (GET_CODE (note) != NOTE && GET_CODE (note) != CODE_LABEL)
break;
- }
- }
- /* Output this line note
- if it is the first or the last line note in a row. */
- if (!note_after)
- output_source_line (file, insn);
+ /* These types of notes can be significant
+ so make sure the preceding line number stays. */
+ else if (GET_CODE (note) == NOTE
+ && (NOTE_LINE_NUMBER (note) == NOTE_INSN_BLOCK_BEG
+ || NOTE_LINE_NUMBER (note) == NOTE_INSN_BLOCK_END
+ || NOTE_LINE_NUMBER (note) == NOTE_INSN_FUNCTION_BEG))
+ break;
+ else if (GET_CODE (note) == NOTE && NOTE_LINE_NUMBER (note) > 0)
+ {
+ /* Another line note follows; we can delete this note
+ if no intervening line numbers have notes elsewhere. */
+ int num;
+ for (num = NOTE_LINE_NUMBER (insn) + 1;
+ num < NOTE_LINE_NUMBER (note);
+ num++)
+ if (line_note_exists[num])
+ break;
+
+ if (num >= NOTE_LINE_NUMBER (note))
+ note_after = 1;
+ break;
+ }
+ }
+
+ /* Output this line note if it is the first or the last line
+ note in a row. */
+ if (!note_after)
+ output_source_line (file, insn);
+ }
+ break;
}
break;
case BARRIER:
-#if defined (DWARF2_UNWIND_INFO) && !defined (ACCUMULATE_OUTGOING_ARGS)
- /* If we push arguments, we need to check all insns for stack
- adjustments. */
- if (dwarf2out_do_frame ())
- dwarf2out_frame_debug (insn);
+#if defined (DWARF2_UNWIND_INFO)
+ if (dwarf2out_do_frame ())
+ dwarf2out_frame_debug (insn);
#endif
break;
new_block = 1;
#ifdef FINAL_PRESCAN_LABEL
- FINAL_PRESCAN_INSN (insn, NULL_PTR, 0);
+ FINAL_PRESCAN_INSN (insn, NULL, 0);
#endif
#ifdef SDB_DEBUGGING_INFO
if (write_symbols == SDB_DEBUG && LABEL_NAME (insn))
sdbout_label (insn);
#endif
-#ifdef DWARF_DEBUGGING_INFO
- if (write_symbols == DWARF_DEBUG && LABEL_NAME (insn))
- dwarfout_label (insn);
-#endif
-#ifdef DWARF2_DEBUGGING_INFO
- if (write_symbols == DWARF2_DEBUG && LABEL_NAME (insn))
- dwarf2out_label (insn);
-#endif
if (app_on)
{
fputs (ASM_APP_OFF, file);
ASM_OUTPUT_CASE_LABEL (file, "L", CODE_LABEL_NUMBER (insn),
NEXT_INSN (insn));
#else
- ASM_OUTPUT_INTERNAL_LABEL (file, "L", CODE_LABEL_NUMBER (insn));
+ if (LABEL_ALTERNATE_NAME (insn))
+ ASM_OUTPUT_ALTERNATE_LABEL_NAME (file, insn);
+ else
+ ASM_OUTPUT_INTERNAL_LABEL (file, "L", CODE_LABEL_NUMBER (insn));
#endif
#endif
break;
}
}
-
- ASM_OUTPUT_INTERNAL_LABEL (file, "L", CODE_LABEL_NUMBER (insn));
+ if (LABEL_ALTERNATE_NAME (insn))
+ ASM_OUTPUT_ALTERNATE_LABEL_NAME (file, insn);
+ else
+ ASM_OUTPUT_INTERNAL_LABEL (file, "L", CODE_LABEL_NUMBER (insn));
break;
default:
#ifdef ASM_OUTPUT_ADDR_VEC
ASM_OUTPUT_ADDR_VEC (PREV_INSN (insn), body);
#else
- abort();
+ abort ();
#endif
}
else
#ifdef ASM_OUTPUT_ADDR_DIFF_VEC
ASM_OUTPUT_ADDR_DIFF_VEC (PREV_INSN (insn), body);
#else
- abort();
+ abort ();
#endif
}
#else
{
unsigned int noperands = asm_noperands (body);
rtx *ops = (rtx *) alloca (noperands * sizeof (rtx));
- char *string;
+ const char *string;
/* There's no telling what that did to the condition codes. */
CC_STATUS_INIT;
}
/* Get out the operand values. */
- string = decode_asm_operands (body, ops, NULL_PTR,
- NULL_PTR, NULL_PTR);
+ string = decode_asm_operands (body, ops, NULL, NULL, NULL);
/* Inhibit aborts on what would otherwise be compiler bugs. */
insn_noperands = noperands;
this_is_asm_operands = insn;
body = PATTERN (insn);
#ifdef HAVE_cc0
- set = single_set(insn);
+ set = single_set (insn);
/* Check for redundant test and compare instructions
(when the condition codes are already set up as desired).
if (optimize)
{
#if 0
- rtx set = single_set(insn);
+ rtx set = single_set (insn);
#endif
if (set
&& set != 0)
{
rtx cond_rtx, then_rtx, else_rtx;
-
+
if (GET_CODE (insn) != JUMP_INSN
&& GET_CODE (SET_SRC (set)) == IF_THEN_ELSE)
{
then_rtx = const_true_rtx;
else_rtx = const0_rtx;
}
-
+
switch (GET_CODE (cond_rtx))
{
case GTU:
#endif
+#ifdef HAVE_peephole
/* Do machine-specific peephole optimizations if desired. */
if (optimize && !flag_no_peephole && !nopeepholes)
/* PEEPHOLE might have changed this. */
body = PATTERN (insn);
}
+#endif
/* Try to recognize the instruction.
If successful, verify that the operands satisfy the
since `reload' should have changed them so that they do. */
insn_code_number = recog_memoized (insn);
- extract_insn (insn);
cleanup_subreg_operands (insn);
-#ifdef REGISTER_CONSTRAINTS
- if (! constrain_operands (1))
+ /* Dump the insn in the assembly for debugging. */
+ if (flag_dump_rtl_in_asm)
+ {
+ print_rtx_head = ASM_COMMENT_START;
+ print_rtl_single (asm_out_file, insn);
+ print_rtx_head = "";
+ }
+
+ if (! constrain_operands_cached (1))
fatal_insn_not_found (insn);
-#endif
/* Some target machines need to prescan each insn before
it is output. */
#ifdef FINAL_PRESCAN_INSN
- FINAL_PRESCAN_INSN (insn, recog_operand, recog_n_operands);
+ FINAL_PRESCAN_INSN (insn, recog_data.operand, recog_data.n_operands);
+#endif
+
+#ifdef HAVE_conditional_execution
+ if (GET_CODE (PATTERN (insn)) == COND_EXEC)
+ current_insn_predicate = COND_EXEC_TEST (PATTERN (insn));
+ else
+ current_insn_predicate = NULL_RTX;
#endif
#ifdef HAVE_cc0
NOTICE_UPDATE_CC (body, insn);
#endif
- debug_insn = insn;
+ current_output_insn = debug_insn = insn;
-#if defined (DWARF2_UNWIND_INFO) && !defined (ACCUMULATE_OUTGOING_ARGS)
- /* If we push arguments, we want to know where the calls are. */
+#if defined (DWARF2_UNWIND_INFO)
if (GET_CODE (insn) == CALL_INSN && dwarf2out_do_frame ())
dwarf2out_frame_debug (insn);
#endif
- /* If the proper template needs to be chosen by some C code,
- run that code and get the real template. */
+ /* Find the proper template for this insn. */
+ template = get_insn_template (insn_code_number, insn);
- template = insn_template[insn_code_number];
+ /* If the C code returns 0, it means that it is a jump insn
+ which follows a deleted test insn, and that test insn
+ needs to be reinserted. */
if (template == 0)
{
- template = (*insn_outfun[insn_code_number]) (recog_operand, insn);
+ rtx prev;
+
+ if (prev_nonnote_insn (insn) != last_ignored_compare)
+ abort ();
+ new_block = 0;
- /* If the C code returns 0, it means that it is a jump insn
- which follows a deleted test insn, and that test insn
- needs to be reinserted. */
- if (template == 0)
+ /* We have already processed the notes between the setter and
+ the user. Make sure we don't process them again, this is
+ particularly important if one of the notes is a block
+ scope note or an EH note. */
+ for (prev = insn;
+ prev != last_ignored_compare;
+ prev = PREV_INSN (prev))
{
- if (prev_nonnote_insn (insn) != last_ignored_compare)
- abort ();
- new_block = 0;
- return prev_nonnote_insn (insn);
+ if (GET_CODE (prev) == NOTE)
+ {
+ NOTE_LINE_NUMBER (prev) = NOTE_INSN_DELETED;
+ NOTE_SOURCE_FILE (prev) = 0;
+ }
}
+
+ return prev;
}
/* If the template is the string "#", it means that this insn must
/* If we didn't split the insn, go away. */
if (new == insn && PATTERN (new) == body)
fatal_insn ("Could not split insn", insn);
-
+
#ifdef HAVE_ATTR_length
/* This instruction should have been split in shorten_branches,
to ensure that we would have valid length info for the
new_block = 0;
return new;
}
-
+
if (prescan > 0)
break;
+#ifdef IA64_UNWIND_INFO
+ IA64_UNWIND_EMIT (asm_out_file, insn);
+#endif
/* Output assembler code from the template. */
- output_asm_insn (template, recog_operand);
+ output_asm_insn (template, recog_data.operand);
#if defined (DWARF2_UNWIND_INFO)
-#if !defined (ACCUMULATE_OUTGOING_ARGS)
- /* If we push arguments, we need to check all insns for stack
- adjustments. */
+#if defined (HAVE_prologue)
if (GET_CODE (insn) == INSN && dwarf2out_do_frame ())
dwarf2out_frame_debug (insn);
#else
-#if defined (HAVE_prologue)
- /* If this insn is part of the prologue, emit DWARF v2
- call frame info. */
- if (RTX_FRAME_RELATED_P (insn) && dwarf2out_do_frame ())
+ if (!ACCUMULATE_OUTGOING_ARGS
+ && GET_CODE (insn) == INSN
+ && dwarf2out_do_frame ())
dwarf2out_frame_debug (insn);
#endif
#endif
-#endif
#if 0
/* It's not at all clear why we did this and doing so interferes
INSN_DELETED_P (insn) = 1;
#endif
- debug_insn = 0;
+ current_output_insn = debug_insn = 0;
}
}
return NEXT_INSN (insn);
FILE *file ATTRIBUTE_UNUSED;
rtx insn;
{
- register char *filename = NOTE_SOURCE_FILE (insn);
+ register const char *filename = NOTE_SOURCE_FILE (insn);
/* Remember filename for basic block profiling.
Filenames are allocated on the permanent obstack
}
}
\f
-
/* For each operand in INSN, simplify (subreg (reg)) so that it refers
directly to the desired hard register. */
+
void
cleanup_subreg_operands (insn)
rtx insn;
{
int i;
-
- extract_insn (insn);
- for (i = 0; i < recog_n_operands; i++)
+ extract_insn_cached (insn);
+ for (i = 0; i < recog_data.n_operands; i++)
{
- if (GET_CODE (recog_operand[i]) == SUBREG)
- recog_operand[i] = alter_subreg (recog_operand[i]);
- else if (GET_CODE (recog_operand[i]) == PLUS
- || GET_CODE (recog_operand[i]) == MULT)
- recog_operand[i] = walk_alter_subreg (recog_operand[i]);
+ if (GET_CODE (recog_data.operand[i]) == SUBREG)
+ recog_data.operand[i] = alter_subreg (recog_data.operand[i]);
+ else if (GET_CODE (recog_data.operand[i]) == PLUS
+ || GET_CODE (recog_data.operand[i]) == MULT
+ || GET_CODE (recog_data.operand[i]) == MEM)
+ recog_data.operand[i] = walk_alter_subreg (recog_data.operand[i]);
}
- for (i = 0; i < recog_n_dups; i++)
+ for (i = 0; i < recog_data.n_dups; i++)
{
- if (GET_CODE (*recog_dup_loc[i]) == SUBREG)
- *recog_dup_loc[i] = alter_subreg (*recog_dup_loc[i]);
- else if (GET_CODE (*recog_dup_loc[i]) == PLUS
- || GET_CODE (*recog_dup_loc[i]) == MULT)
- *recog_dup_loc[i] = walk_alter_subreg (*recog_dup_loc[i]);
+ if (GET_CODE (*recog_data.dup_loc[i]) == SUBREG)
+ *recog_data.dup_loc[i] = alter_subreg (*recog_data.dup_loc[i]);
+ else if (GET_CODE (*recog_data.dup_loc[i]) == PLUS
+ || GET_CODE (*recog_data.dup_loc[i]) == MULT
+ || GET_CODE (*recog_data.dup_loc[i]) == MEM)
+ *recog_data.dup_loc[i] = walk_alter_subreg (*recog_data.dup_loc[i]);
}
}
if (GET_CODE (y) == REG)
{
- /* If the word size is larger than the size of this register,
- adjust the register number to compensate. */
- /* ??? Note that this just catches stragglers created by/for
- integrate. It would be better if we either caught these
- earlier, or kept _all_ subregs until now and eliminate
- gen_lowpart and friends. */
+ int regno = subreg_hard_regno (x, 1);
PUT_CODE (x, REG);
-#ifdef ALTER_HARD_SUBREG
- REGNO (x) = ALTER_HARD_SUBREG(GET_MODE (x), SUBREG_WORD (x),
- GET_MODE (y), REGNO (y));
-#else
- REGNO (x) = REGNO (y) + SUBREG_WORD (x);
-#endif
+ REGNO (x) = regno;
+ ORIGINAL_REGNO (x) = ORIGINAL_REGNO (y);
/* This field has a different meaning for REGs and SUBREGs. Make sure
to clear it! */
x->used = 0;
}
else if (GET_CODE (y) == MEM)
{
- register int offset = SUBREG_WORD (x) * UNITS_PER_WORD;
- if (BYTES_BIG_ENDIAN)
- offset -= (MIN (UNITS_PER_WORD, GET_MODE_SIZE (GET_MODE (x)))
- - MIN (UNITS_PER_WORD, GET_MODE_SIZE (GET_MODE (y))));
+ register int offset = SUBREG_BYTE (x);
+
+ /* Catch these instead of generating incorrect code. */
+ if ((offset % GET_MODE_SIZE (GET_MODE (x))) != 0)
+ abort ();
+
PUT_CODE (x, MEM);
MEM_COPY_ATTRIBUTES (x, y);
- MEM_ALIAS_SET (x) = MEM_ALIAS_SET (y);
XEXP (x, 0) = plus_constant (XEXP (y, 0), offset);
}
case SUBREG:
return alter_subreg (x);
-
+
default:
break;
}
PUT_CODE (cond, NE);
value = 2;
break;
-
+
default:
break;
}
PUT_CODE (cond, NE);
value = 2;
break;
-
+
default:
break;
}
case LTU:
/* Jump becomes no-op. */
return -1;
-
+
default:
break;
}
if (this_is_asm_operands)
error_for_asm (this_is_asm_operands, "invalid `asm': %s", _(msgid));
else
- {
- error ("output_operand: %s", _(msgid));
- abort ();
- }
+ internal_error ("output_operand: %s", _(msgid));
}
\f
/* Output of assembler code from a template, and its subroutines. */
if (debug_insn)
{
register int num = INSN_CODE (debug_insn);
- fprintf (asm_out_file, "\t%s %d\t%s",
- ASM_COMMENT_START, INSN_UID (debug_insn), insn_name[num]);
- if (insn_n_alternatives[num] > 1)
+ fprintf (asm_out_file, "\t%s %d\t%s",
+ ASM_COMMENT_START, INSN_UID (debug_insn),
+ insn_data[num].name);
+ if (insn_data[num].n_alternatives > 1)
fprintf (asm_out_file, "/%d", which_alternative + 1);
#ifdef HAVE_ATTR_length
- fprintf (asm_out_file, "\t[length = %d]", get_attr_length (debug_insn));
+ fprintf (asm_out_file, "\t[length = %d]",
+ get_attr_length (debug_insn));
#endif
/* Clear this so only the first assembler insn
of any rtl insn will get the special comment for -dp. */
case '{':
{
register int i;
-
+
/* If we want the first dialect, do nothing. Otherwise, skip
DIALECT_NUMBER of strings ending with '|'. */
for (i = 0; i < dialect_number; i++)
Letters `acln' are implemented directly.
Other letters are passed to `output_operand' so that
the PRINT_OPERAND macro can define them. */
- else if ((*p >= 'a' && *p <= 'z')
- || (*p >= 'A' && *p <= 'Z'))
+ else if (ISLOWER (*p) || ISUPPER (*p))
{
int letter = *p++;
c = atoi (p);
}
else
output_operand (operands[c], letter);
-
- while ((c = *p) >= '0' && c <= '9') p++;
+
+ while ((c = *p) >= '0' && c <= '9')
+ p++;
}
/* % followed by a digit outputs an operand the default way. */
else if (*p >= '0' && *p <= '9')
{
c = atoi (p);
- if (this_is_asm_operands && (c < 0 || (unsigned int) c >= insn_noperands))
+ if (this_is_asm_operands
+ && (c < 0 || (unsigned int) c >= insn_noperands))
output_operand_lossage ("operand number out of range");
else
output_operand (operands[c], 0);
- while ((c = *p) >= '0' && c <= '9') p++;
+ while ((c = *p) >= '0' && c <= '9')
+ p++;
}
/* % followed by punctuation: output something for that
punctuation character alone, with no operand.
The PRINT_OPERAND macro decides what is actually done. */
#ifdef PRINT_OPERAND_PUNCT_VALID_P
- else if (PRINT_OPERAND_PUNCT_VALID_P ((unsigned char)*p))
+ else if (PRINT_OPERAND_PUNCT_VALID_P ((unsigned char) *p))
output_operand (NULL_RTX, *p++);
#endif
else
char buf[256];
if (GET_CODE (x) == LABEL_REF)
- ASM_GENERATE_INTERNAL_LABEL (buf, "L", CODE_LABEL_NUMBER (XEXP (x, 0)));
- else if (GET_CODE (x) == CODE_LABEL)
+ x = XEXP (x, 0);
+ if (GET_CODE (x) == CODE_LABEL
+ || (GET_CODE (x) == NOTE
+ && NOTE_LINE_NUMBER (x) == NOTE_INSN_DELETED_LABEL))
ASM_GENERATE_INTERNAL_LABEL (buf, "L", CODE_LABEL_NUMBER (x));
else
output_operand_lossage ("`%l' operand isn't a label");
static void
output_operand (x, code)
rtx x;
- int code;
+ int code ATTRIBUTE_UNUSED;
{
if (x && GET_CODE (x) == SUBREG)
x = alter_subreg (x);
break;
case SYMBOL_REF:
+#ifdef ASM_OUTPUT_SYMBOL_REF
+ ASM_OUTPUT_SYMBOL_REF (file, x);
+#else
assemble_name (file, XSTR (x, 0));
+#endif
break;
case LABEL_REF:
- ASM_GENERATE_INTERNAL_LABEL (buf, "L", CODE_LABEL_NUMBER (XEXP (x, 0)));
- assemble_name (file, buf);
- break;
-
+ x = XEXP (x, 0);
+ /* Fall through. */
case CODE_LABEL:
ASM_GENERATE_INTERNAL_LABEL (buf, "L", CODE_LABEL_NUMBER (x));
assemble_name (file, buf);
if (CONST_DOUBLE_HIGH (x))
fprintf (file, HOST_WIDE_INT_PRINT_DOUBLE_HEX,
CONST_DOUBLE_HIGH (x), CONST_DOUBLE_LOW (x));
- else if (CONST_DOUBLE_LOW (x) < 0)
+ else if (CONST_DOUBLE_LOW (x) < 0)
fprintf (file, HOST_WIDE_INT_PRINT_HEX, CONST_DOUBLE_LOW (x));
else
fprintf (file, HOST_WIDE_INT_PRINT_DEC, CONST_DOUBLE_LOW (x));
else
{
output_addr_const (file, XEXP (x, 0));
- if (INTVAL (XEXP (x, 1)) >= 0)
+ if (GET_CODE (XEXP (x, 1)) != CONST_INT
+ || INTVAL (XEXP (x, 1)) >= 0)
fprintf (file, "+");
output_addr_const (file, XEXP (x, 1));
}
output_addr_const (file, XEXP (x, 0));
fprintf (file, "-");
- if (GET_CODE (XEXP (x, 1)) == CONST_INT
- && INTVAL (XEXP (x, 1)) < 0)
+ if ((GET_CODE (XEXP (x, 1)) == CONST_INT
+ && INTVAL (XEXP (x, 1)) < 0)
+ || GET_CODE (XEXP (x, 1)) != CONST_INT)
{
fprintf (file, "%s", ASM_OPEN_PAREN);
output_addr_const (file, XEXP (x, 1));
break;
default:
+#ifdef OUTPUT_ADDR_CONST_EXTRA
+ OUTPUT_ADDR_CONST_EXTRA (file, x, fail);
+ break;
+
+ fail:
+#endif
output_operand_lossage ("invalid expression as operand");
}
}
We handle alternate assembler dialects here, just like output_asm_insn. */
void
-asm_fprintf VPROTO((FILE *file, const char *p, ...))
+asm_fprintf VPARAMS ((FILE *file, const char *p, ...))
{
#ifndef ANSI_PROTOTYPES
FILE *file;
if (*p == '|')
p++;
- }
+ }
}
break;
case 'M': case 'N': case 'P': case 'Q': case 'S':
case 'T': case 'V': case 'W': case 'Y': case 'Z':
break;
-
+
ASM_FPRINTF_EXTENSIONS (file, argptr, p)
#endif
default:
default:
fputc (c, file);
}
+ va_end (argptr);
}
\f
/* Split up a CONST_DOUBLE or integer constant rtx
/* In this case the CONST_INT holds both target words.
Extract the bits from it into two word-sized pieces.
Sign extend each half to HOST_WIDE_INT. */
- rtx low, high;
- /* On machines where HOST_BITS_PER_WIDE_INT == BITS_PER_WORD
- the shift below will cause a compiler warning, even though
- this code won't be executed. So put the shift amounts in
- variables to avoid the warning. */
- int rshift = HOST_BITS_PER_WIDE_INT - BITS_PER_WORD;
- int lshift = HOST_BITS_PER_WIDE_INT - 2 * BITS_PER_WORD;
-
- low = GEN_INT ((INTVAL (value) << rshift) >> rshift);
- high = GEN_INT ((INTVAL (value) << lshift) >> rshift);
+ unsigned HOST_WIDE_INT low, high;
+ unsigned HOST_WIDE_INT mask, sign_bit, sign_extend;
+
+ /* Set sign_bit to the most significant bit of a word. */
+ sign_bit = 1;
+ sign_bit <<= BITS_PER_WORD - 1;
+
+ /* Set mask so that all bits of the word are set. We could
+ have used 1 << BITS_PER_WORD instead of basing the
+ calculation on sign_bit. However, on machines where
+ HOST_BITS_PER_WIDE_INT == BITS_PER_WORD, it could cause a
+ compiler warning, even though the code would never be
+ executed. */
+ mask = sign_bit << 1;
+ mask--;
+
+ /* Set sign_extend as any remaining bits. */
+ sign_extend = ~mask;
+
+ /* Pick the lower word and sign-extend it. */
+ low = INTVAL (value);
+ low &= mask;
+ if (low & sign_bit)
+ low |= sign_extend;
+
+ /* Pick the higher word, shifted to the least significant
+ bits, and sign-extend it. */
+ high = INTVAL (value);
+ high >>= BITS_PER_WORD - 1;
+ high >>= 1;
+ high &= mask;
+ if (high & sign_bit)
+ high |= sign_extend;
+
+ /* Store the words in the target machine order. */
if (WORDS_BIG_ENDIAN)
{
- *first = high;
- *second = low;
+ *first = GEN_INT (high);
+ *second = GEN_INT (low);
}
else
{
- *first = low;
- *second = high;
+ *first = GEN_INT (low);
+ *second = GEN_INT (high);
}
}
else
else
{
#ifdef REAL_ARITHMETIC
- REAL_VALUE_TYPE r; long l[2];
+ REAL_VALUE_TYPE r;
+ long l[2];
REAL_VALUE_FROM_CONST_DOUBLE (r, value);
/* Note, this converts the REAL_VALUE_TYPE to the target's
if ((HOST_FLOAT_FORMAT != TARGET_FLOAT_FORMAT
|| HOST_BITS_PER_WIDE_INT != BITS_PER_WORD)
&& ! flag_pretend_float)
- abort ();
+ abort ();
if (
#ifdef HOST_WORDS_BIG_ENDIAN
leaf_function_p ()
{
rtx insn;
+ rtx link;
if (profile_flag || profile_block_flag || profile_arc_flag)
return 0;
for (insn = get_insns (); insn; insn = NEXT_INSN (insn))
{
- if (GET_CODE (insn) == CALL_INSN)
+ if (GET_CODE (insn) == CALL_INSN
+ && ! SIBLING_CALL_P (insn))
return 0;
if (GET_CODE (insn) == INSN
&& GET_CODE (PATTERN (insn)) == SEQUENCE
- && GET_CODE (XVECEXP (PATTERN (insn), 0, 0)) == CALL_INSN)
+ && GET_CODE (XVECEXP (PATTERN (insn), 0, 0)) == CALL_INSN
+ && ! SIBLING_CALL_P (XVECEXP (PATTERN (insn), 0, 0)))
return 0;
}
- for (insn = current_function_epilogue_delay_list; insn; insn = XEXP (insn, 1))
+ for (link = current_function_epilogue_delay_list;
+ link;
+ link = XEXP (link, 1))
{
- if (GET_CODE (XEXP (insn, 0)) == CALL_INSN)
+ insn = XEXP (link, 0);
+
+ if (GET_CODE (insn) == CALL_INSN
+ && ! SIBLING_CALL_P (insn))
return 0;
- if (GET_CODE (XEXP (insn, 0)) == INSN
- && GET_CODE (PATTERN (XEXP (insn, 0))) == SEQUENCE
- && GET_CODE (XVECEXP (PATTERN (XEXP (insn, 0)), 0, 0)) == CALL_INSN)
+ if (GET_CODE (insn) == INSN
+ && GET_CODE (PATTERN (insn)) == SEQUENCE
+ && GET_CODE (XVECEXP (PATTERN (insn), 0, 0)) == CALL_INSN
+ && ! SIBLING_CALL_P (XVECEXP (PATTERN (insn), 0, 0)))
return 0;
}
return 1;
}
+/* Return 1 if branch is an forward branch.
+ Uses insn_shuid array, so it works only in the final pass. May be used by
+ output templates to customary add branch prediction hints.
+ */
+int
+final_forward_branch_p (insn)
+ rtx insn;
+{
+ int insn_id, label_id;
+ if (!uid_shuid)
+ abort ();
+ insn_id = INSN_SHUID (insn);
+ label_id = INSN_SHUID (JUMP_LABEL (insn));
+ /* We've hit some insns that does not have id information available. */
+ if (!insn_id || !label_id)
+ abort ();
+ return insn_id < label_id;
+}
+
/* On some machines, a function with no call insns
can run faster if it doesn't create its own register window.
When output, the leaf function should use only the "output"
#ifdef LEAF_REGISTERS
-static char permitted_reg_in_leaf_functions[] = LEAF_REGISTERS;
-
/* Return 1 if this function uses only the registers that can be
safely renumbered. */
only_leaf_regs_used ()
{
int i;
+ char *permitted_reg_in_leaf_functions = LEAF_REGISTERS;
for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
if ((regs_ever_live[i] || global_regs[i])
The reg-notes can contain frame pointer refs,
and renumbering them could crash, and should not be needed. */
for (insn = first; insn; insn = NEXT_INSN (insn))
- if (GET_RTX_CLASS (GET_CODE (insn)) == 'i')
+ if (INSN_P (insn))
leaf_renumber_regs_insn (PATTERN (insn));
- for (insn = current_function_epilogue_delay_list; insn; insn = XEXP (insn, 1))
- if (GET_RTX_CLASS (GET_CODE (XEXP (insn, 0))) == 'i')
+ for (insn = current_function_epilogue_delay_list;
+ insn;
+ insn = XEXP (insn, 1))
+ if (INSN_P (XEXP (insn, 0)))
leaf_renumber_regs_insn (PATTERN (XEXP (insn, 0)));
}
in_rtx->used = 1;
}
- if (GET_RTX_CLASS (GET_CODE (in_rtx)) == 'i')
+ if (INSN_P (in_rtx))
{
/* Inside a SEQUENCE, we find insns.
Renumber just the patterns of these insns,