/* For GET_MODE_BITSIZE, word_mode */
#include "machmode.h"
-/* The default branch cost is 1. */
-#ifndef BRANCH_COST
-#define BRANCH_COST(speed_p, predictable_p) 1
-#endif
-
/* This is the 4th arg to `expand_expr'.
EXPAND_STACK_PARM means we are possibly expanding a call param onto
the stack.
more information. */
#define OK_DEFER_POP (inhibit_defer_pop -= 1)
\f
-/* If a memory-to-memory move would take MOVE_RATIO or more simple
- move-instruction sequences, we will do a movmem or libcall instead. */
-
-#ifndef MOVE_RATIO
-#if defined (HAVE_movmemqi) || defined (HAVE_movmemhi) || defined (HAVE_movmemsi) || defined (HAVE_movmemdi) || defined (HAVE_movmemti)
-#define MOVE_RATIO(speed) 2
-#else
-/* If we are optimizing for space (-Os), cut down the default move ratio. */
-#define MOVE_RATIO(speed) ((speed) ? 15 : 3)
-#endif
-#endif
-
-/* If a clear memory operation would take CLEAR_RATIO or more simple
- move-instruction sequences, we will do a setmem or libcall instead. */
-
-#ifndef CLEAR_RATIO
-#if defined (HAVE_setmemqi) || defined (HAVE_setmemhi) || defined (HAVE_setmemsi) || defined (HAVE_setmemdi) || defined (HAVE_setmemti)
-#define CLEAR_RATIO(speed) 2
-#else
-/* If we are optimizing for space, cut down the default clear ratio. */
-#define CLEAR_RATIO(speed) ((speed) ? 15 :3)
-#endif
-#endif
-
-/* If a memory set (to value other than zero) operation would take
- SET_RATIO or more simple move-instruction sequences, we will do a movmem
- or libcall instead. */
-#ifndef SET_RATIO
-#define SET_RATIO(speed) MOVE_RATIO(speed)
-#endif
-\f
enum direction {none, upward, downward};
/* Structure to record the size of a sequence of arguments
((SIZE).var == 0 ? GEN_INT ((SIZE).constant) \
: expand_normal (ARGS_SIZE_TREE (SIZE)))
-/* Supply a default definition for FUNCTION_ARG_PADDING:
- usually pad upward, but pad short args downward on
- big-endian machines. */
-
-#define DEFAULT_FUNCTION_ARG_PADDING(MODE, TYPE) \
- (! BYTES_BIG_ENDIAN \
- ? upward \
- : (((MODE) == BLKmode \
- ? ((TYPE) && TREE_CODE (TYPE_SIZE (TYPE)) == INTEGER_CST \
- && int_size_in_bytes (TYPE) < (PARM_BOUNDARY / BITS_PER_UNIT)) \
- : GET_MODE_BITSIZE (MODE) < PARM_BOUNDARY) \
- ? downward : upward))
-
-#ifndef FUNCTION_ARG_PADDING
-#define FUNCTION_ARG_PADDING(MODE, TYPE) \
- DEFAULT_FUNCTION_ARG_PADDING ((MODE), (TYPE))
-#endif
-
-/* Supply a default definition for FUNCTION_ARG_BOUNDARY. Normally, we let
- FUNCTION_ARG_PADDING, which also pads the length, handle any needed
- alignment. */
-
-#ifndef FUNCTION_ARG_BOUNDARY
-#define FUNCTION_ARG_BOUNDARY(MODE, TYPE) PARM_BOUNDARY
-#endif
-
-/* Supply a default definition of STACK_SAVEAREA_MODE for emit_stack_save.
- Normally move_insn, so Pmode stack pointer. */
-
-#ifndef STACK_SAVEAREA_MODE
-#define STACK_SAVEAREA_MODE(LEVEL) Pmode
-#endif
-
-/* Supply a default definition of STACK_SIZE_MODE for
- allocate_dynamic_stack_space. Normally PLUS/MINUS, so word_mode. */
-
-#ifndef STACK_SIZE_MODE
-#define STACK_SIZE_MODE word_mode
-#endif
-
-/* Provide default values for the macros controlling stack checking. */
-
-/* The default is neither full builtin stack checking... */
-#ifndef STACK_CHECK_BUILTIN
-#define STACK_CHECK_BUILTIN 0
-#endif
-
-/* ...nor static builtin stack checking. */
-#ifndef STACK_CHECK_STATIC_BUILTIN
-#define STACK_CHECK_STATIC_BUILTIN 0
-#endif
-
-/* The default interval is one page (4096 bytes). */
-#ifndef STACK_CHECK_PROBE_INTERVAL_EXP
-#define STACK_CHECK_PROBE_INTERVAL_EXP 12
-#endif
-
-/* The default is not to move the stack pointer. */
-#ifndef STACK_CHECK_MOVING_SP
-#define STACK_CHECK_MOVING_SP 0
-#endif
-
-/* This is a kludge to try to capture the discrepancy between the old
- mechanism (generic stack checking) and the new mechanism (static
- builtin stack checking). STACK_CHECK_PROTECT needs to be bumped
- for the latter because part of the protection area is effectively
- included in STACK_CHECK_MAX_FRAME_SIZE for the former. */
-#ifdef STACK_CHECK_PROTECT
-#define STACK_OLD_CHECK_PROTECT STACK_CHECK_PROTECT
-#else
-#define STACK_OLD_CHECK_PROTECT \
- (USING_SJLJ_EXCEPTIONS ? 75 * UNITS_PER_WORD : 8 * 1024)
-#endif
-
-/* Minimum amount of stack required to recover from an anticipated stack
- overflow detection. The default value conveys an estimate of the amount
- of stack required to propagate an exception. */
-#ifndef STACK_CHECK_PROTECT
-#define STACK_CHECK_PROTECT \
- (USING_SJLJ_EXCEPTIONS ? 75 * UNITS_PER_WORD : 12 * 1024)
-#endif
-
-/* Make the maximum frame size be the largest we can and still only need
- one probe per function. */
-#ifndef STACK_CHECK_MAX_FRAME_SIZE
-#define STACK_CHECK_MAX_FRAME_SIZE \
- ((1 << STACK_CHECK_PROBE_INTERVAL_EXP) - UNITS_PER_WORD)
-#endif
-
-/* This is arbitrary, but should be large enough everywhere. */
-#ifndef STACK_CHECK_FIXED_FRAME_SIZE
-#define STACK_CHECK_FIXED_FRAME_SIZE (4 * UNITS_PER_WORD)
-#endif
-
-/* Provide a reasonable default for the maximum size of an object to
- allocate in the fixed frame. We may need to be able to make this
- controllable by the user at some point. */
-#ifndef STACK_CHECK_MAX_VAR_SIZE
-#define STACK_CHECK_MAX_VAR_SIZE (STACK_CHECK_MAX_FRAME_SIZE / 100)
-#endif
\f
/* This structure is used to pass around information about exploded
unary, binary and trinary expressions between expand_expr_real_1 and
typedef struct separate_ops
{
enum tree_code code;
+ location_t location;
tree type;
tree op0, op1, op2;
- location_t location;
} *sepops;
\f
/* Functions from optabs.c, commonly used, and without need for the optabs
perform the operation described by CODE and MODE. */
extern int have_insn_for (enum rtx_code, enum machine_mode);
-extern rtx prepare_operand (int, rtx, int, enum machine_mode, enum machine_mode,
- int);
-
/* Emit code to make a call to a constant function or a library call. */
extern void emit_libcall_block (rtx, rtx, rtx, rtx);
extern void fixup_tail_calls (void);
#ifdef TREE_CODE
-extern rtx expand_shift (enum tree_code, enum machine_mode, rtx, tree, rtx,
- int);
+extern rtx expand_variable_shift (enum tree_code, enum machine_mode,
+ rtx, tree, rtx, int);
+extern rtx expand_shift (enum tree_code, enum machine_mode, rtx, int, rtx,
+ int);
extern rtx expand_divmod (int, enum tree_code, enum machine_mode, rtx, rtx,
rtx, int);
#endif
enum save_level {SAVE_BLOCK, SAVE_FUNCTION, SAVE_NONLOCAL};
/* Save the stack pointer at the specified level. */
-extern void emit_stack_save (enum save_level, rtx *, rtx);
+extern void emit_stack_save (enum save_level, rtx *);
/* Restore the stack pointer from a save area of the specified level. */
-extern void emit_stack_restore (enum save_level, rtx, rtx);
+extern void emit_stack_restore (enum save_level, rtx);
/* Invoke emit_stack_save for the nonlocal_goto_save_area. */
extern void update_nonlocal_goto_save_area (void);
-/* Allocate some space on the stack dynamically and return its address. An rtx
- says how many bytes. */
-extern rtx allocate_dynamic_stack_space (rtx, rtx, int);
+/* Allocate some space on the stack dynamically and return its address. */
+extern rtx allocate_dynamic_stack_space (rtx, unsigned, unsigned, bool);
+
+/* Emit one stack probe at ADDRESS, an address within the stack. */
+extern void emit_stack_probe (rtx);
/* Probe a range of stack addresses from FIRST to FIRST+SIZE, inclusive.
FIRST is a constant and size is a Pmode RTX. These are offsets from
extern void store_bit_field (rtx, unsigned HOST_WIDE_INT,
unsigned HOST_WIDE_INT, enum machine_mode, rtx);
extern rtx extract_bit_field (rtx, unsigned HOST_WIDE_INT,
- unsigned HOST_WIDE_INT, int, rtx,
+ unsigned HOST_WIDE_INT, int, bool, rtx,
enum machine_mode, enum machine_mode);
extern rtx extract_low_bits (enum machine_mode, enum machine_mode, rtx);
extern rtx expand_mult (enum machine_mode, rtx, rtx, rtx, int);
/* Get the personality libfunc for a function decl. */
rtx get_personality_function (tree);
-extern int vector_mode_valid_p (enum machine_mode);
-
#endif /* GCC_EXPR_H */