static rtx extract_split_bit_field (rtx, unsigned HOST_WIDE_INT,
unsigned HOST_WIDE_INT, int);
static void do_cmp_and_jump (rtx, rtx, enum rtx_code, enum machine_mode, rtx);
+static rtx expand_smod_pow2 (enum machine_mode, rtx, HOST_WIDE_INT);
+static rtx expand_sdiv_pow2 (enum machine_mode, rtx, HOST_WIDE_INT);
/* Nonzero means divides or modulus operations are relatively cheap for
powers of two, so don't use branches; emit the operation instead.
Usually, this will mean that the MD file will emit non-branch
sequences. */
-static int sdiv_pow2_cheap[NUM_MACHINE_MODES];
-static int smod_pow2_cheap[NUM_MACHINE_MODES];
+static bool sdiv_pow2_cheap[NUM_MACHINE_MODES];
+static bool smod_pow2_cheap[NUM_MACHINE_MODES];
#ifndef SLOW_UNALIGNED_ACCESS
#define SLOW_UNALIGNED_ACCESS(MODE, ALIGN) STRICT_ALIGNMENT
static int zero_cost;
static int add_cost[NUM_MACHINE_MODES];
static int neg_cost[NUM_MACHINE_MODES];
-static int shift_cost[MAX_BITS_PER_WORD];
-static int shiftadd_cost[MAX_BITS_PER_WORD];
-static int shiftsub_cost[MAX_BITS_PER_WORD];
+static int shift_cost[NUM_MACHINE_MODES][MAX_BITS_PER_WORD];
+static int shiftadd_cost[NUM_MACHINE_MODES][MAX_BITS_PER_WORD];
+static int shiftsub_cost[NUM_MACHINE_MODES][MAX_BITS_PER_WORD];
static int mul_cost[NUM_MACHINE_MODES];
static int div_cost[NUM_MACHINE_MODES];
static int mul_widen_cost[NUM_MACHINE_MODES];
void
init_expmed (void)
{
- rtx reg, shift_insn, shiftadd_insn, shiftsub_insn;
- int dummy;
- int m;
+ struct
+ {
+ struct rtx_def reg; rtunion reg_fld[2];
+ struct rtx_def plus; rtunion plus_fld1;
+ struct rtx_def neg;
+ struct rtx_def udiv; rtunion udiv_fld1;
+ struct rtx_def mult; rtunion mult_fld1;
+ struct rtx_def div; rtunion div_fld1;
+ struct rtx_def mod; rtunion mod_fld1;
+ struct rtx_def zext;
+ struct rtx_def wide_mult; rtunion wide_mult_fld1;
+ struct rtx_def wide_lshr; rtunion wide_lshr_fld1;
+ struct rtx_def wide_trunc;
+ struct rtx_def shift; rtunion shift_fld1;
+ struct rtx_def shift_mult; rtunion shift_mult_fld1;
+ struct rtx_def shift_add; rtunion shift_add_fld1;
+ struct rtx_def shift_sub; rtunion shift_sub_fld1;
+ } all;
+
+ rtx pow2[MAX_BITS_PER_WORD];
+ rtx cint[MAX_BITS_PER_WORD];
+ int m, n;
enum machine_mode mode, wider_mode;
- start_sequence ();
+ zero_cost = rtx_cost (const0_rtx, 0);
- /* This is "some random pseudo register" for purposes of calling recog
- to see what insns exist. */
- reg = gen_rtx_REG (word_mode, 10000);
+ for (m = 1; m < MAX_BITS_PER_WORD; m++)
+ {
+ pow2[m] = GEN_INT ((HOST_WIDE_INT) 1 << m);
+ cint[m] = GEN_INT (m);
+ }
- zero_cost = rtx_cost (const0_rtx, 0);
+ memset (&all, 0, sizeof all);
+
+ PUT_CODE (&all.reg, REG);
+ REGNO (&all.reg) = 10000;
+
+ PUT_CODE (&all.plus, PLUS);
+ XEXP (&all.plus, 0) = &all.reg;
+ XEXP (&all.plus, 1) = &all.reg;
+
+ PUT_CODE (&all.neg, NEG);
+ XEXP (&all.neg, 0) = &all.reg;
+
+ PUT_CODE (&all.udiv, UDIV);
+ XEXP (&all.udiv, 0) = &all.reg;
+ XEXP (&all.udiv, 1) = &all.reg;
+
+ PUT_CODE (&all.mult, MULT);
+ XEXP (&all.mult, 0) = &all.reg;
+ XEXP (&all.mult, 1) = &all.reg;
+
+ PUT_CODE (&all.div, DIV);
+ XEXP (&all.div, 0) = &all.reg;
+ XEXP (&all.div, 1) = 32 < MAX_BITS_PER_WORD ? cint[32] : GEN_INT (32);
+
+ PUT_CODE (&all.mod, MOD);
+ XEXP (&all.mod, 0) = &all.reg;
+ XEXP (&all.mod, 1) = XEXP (&all.div, 1);
+
+ PUT_CODE (&all.zext, ZERO_EXTEND);
+ XEXP (&all.zext, 0) = &all.reg;
+
+ PUT_CODE (&all.wide_mult, MULT);
+ XEXP (&all.wide_mult, 0) = &all.zext;
+ XEXP (&all.wide_mult, 1) = &all.zext;
+
+ PUT_CODE (&all.wide_lshr, LSHIFTRT);
+ XEXP (&all.wide_lshr, 0) = &all.wide_mult;
- shift_insn = emit_insn (gen_rtx_SET (VOIDmode, reg,
- gen_rtx_ASHIFT (word_mode, reg,
- const0_rtx)));
+ PUT_CODE (&all.wide_trunc, TRUNCATE);
+ XEXP (&all.wide_trunc, 0) = &all.wide_lshr;
- shiftadd_insn
- = emit_insn (gen_rtx_SET (VOIDmode, reg,
- gen_rtx_PLUS (word_mode,
- gen_rtx_MULT (word_mode,
- reg, const0_rtx),
- reg)));
+ PUT_CODE (&all.shift, ASHIFT);
+ XEXP (&all.shift, 0) = &all.reg;
- shiftsub_insn
- = emit_insn (gen_rtx_SET (VOIDmode, reg,
- gen_rtx_MINUS (word_mode,
- gen_rtx_MULT (word_mode,
- reg, const0_rtx),
- reg)));
+ PUT_CODE (&all.shift_mult, MULT);
+ XEXP (&all.shift_mult, 0) = &all.reg;
- init_recog ();
+ PUT_CODE (&all.shift_add, PLUS);
+ XEXP (&all.shift_add, 0) = &all.shift_mult;
+ XEXP (&all.shift_add, 1) = &all.reg;
+ PUT_CODE (&all.shift_sub, MINUS);
+ XEXP (&all.shift_sub, 0) = &all.shift_mult;
+ XEXP (&all.shift_sub, 1) = &all.reg;
for (mode = GET_CLASS_NARROWEST_MODE (MODE_INT);
mode != VOIDmode;
mode = GET_MODE_WIDER_MODE (mode))
{
- reg = gen_rtx_REG (mode, 10000);
- add_cost[mode] = rtx_cost (gen_rtx_PLUS (mode, reg, reg), SET);
- neg_cost[mode] = rtx_cost (gen_rtx_NEG (mode, reg), SET);
- div_cost[mode] = rtx_cost (gen_rtx_UDIV (mode, reg, reg), SET);
- mul_cost[mode] = rtx_cost (gen_rtx_MULT (mode, reg, reg), SET);
-
- sdiv_pow2_cheap[mode]
- = (rtx_cost (gen_rtx_DIV (mode, reg, GEN_INT (32)), SET)
- <= 2 * add_cost[mode]);
- smod_pow2_cheap[mode]
- = (rtx_cost (gen_rtx_MOD (mode, reg, GEN_INT (32)), SET)
- <= 2 * add_cost[mode]);
+ PUT_MODE (&all.reg, mode);
+ PUT_MODE (&all.plus, mode);
+ PUT_MODE (&all.neg, mode);
+ PUT_MODE (&all.udiv, mode);
+ PUT_MODE (&all.mult, mode);
+ PUT_MODE (&all.div, mode);
+ PUT_MODE (&all.mod, mode);
+ PUT_MODE (&all.wide_trunc, mode);
+ PUT_MODE (&all.shift, mode);
+ PUT_MODE (&all.shift_mult, mode);
+ PUT_MODE (&all.shift_add, mode);
+ PUT_MODE (&all.shift_sub, mode);
+
+ add_cost[mode] = rtx_cost (&all.plus, SET);
+ neg_cost[mode] = rtx_cost (&all.neg, SET);
+ div_cost[mode] = rtx_cost (&all.udiv, SET);
+ mul_cost[mode] = rtx_cost (&all.mult, SET);
+
+ sdiv_pow2_cheap[mode] = (rtx_cost (&all.div, SET) <= 2 * add_cost[mode]);
+ smod_pow2_cheap[mode] = (rtx_cost (&all.mod, SET) <= 4 * add_cost[mode]);
wider_mode = GET_MODE_WIDER_MODE (mode);
if (wider_mode != VOIDmode)
{
- mul_widen_cost[wider_mode]
- = rtx_cost (gen_rtx_MULT (wider_mode,
- gen_rtx_ZERO_EXTEND (wider_mode, reg),
- gen_rtx_ZERO_EXTEND (wider_mode, reg)),
- SET);
- mul_highpart_cost[mode]
- = rtx_cost (gen_rtx_TRUNCATE
- (mode,
- gen_rtx_LSHIFTRT (wider_mode,
- gen_rtx_MULT (wider_mode,
- gen_rtx_ZERO_EXTEND
- (wider_mode, reg),
- gen_rtx_ZERO_EXTEND
- (wider_mode, reg)),
- GEN_INT (GET_MODE_BITSIZE (mode)))),
- SET);
- }
- }
-
- shift_cost[0] = 0;
- shiftadd_cost[0] = shiftsub_cost[0] = add_cost[word_mode];
+ PUT_MODE (&all.zext, wider_mode);
+ PUT_MODE (&all.wide_mult, wider_mode);
+ PUT_MODE (&all.wide_lshr, wider_mode);
+ XEXP (&all.wide_lshr, 1) = GEN_INT (GET_MODE_BITSIZE (mode));
- for (m = 1; m < MAX_BITS_PER_WORD; m++)
- {
- rtx c_int = GEN_INT ((HOST_WIDE_INT) 1 << m);
- shift_cost[m] = shiftadd_cost[m] = shiftsub_cost[m] = 32000;
+ mul_widen_cost[wider_mode] = rtx_cost (&all.wide_mult, SET);
+ mul_highpart_cost[mode] = rtx_cost (&all.wide_trunc, SET);
+ }
- XEXP (SET_SRC (PATTERN (shift_insn)), 1) = GEN_INT (m);
- if (recog (PATTERN (shift_insn), shift_insn, &dummy) >= 0)
- shift_cost[m] = rtx_cost (SET_SRC (PATTERN (shift_insn)), SET);
+ shift_cost[mode][0] = 0;
+ shiftadd_cost[mode][0] = shiftsub_cost[mode][0] = add_cost[mode];
- XEXP (XEXP (SET_SRC (PATTERN (shiftadd_insn)), 0), 1) = c_int;
- if (recog (PATTERN (shiftadd_insn), shiftadd_insn, &dummy) >= 0)
- shiftadd_cost[m] = rtx_cost (SET_SRC (PATTERN (shiftadd_insn)), SET);
+ n = MIN (MAX_BITS_PER_WORD, GET_MODE_BITSIZE (mode));
+ for (m = 1; m < n; m++)
+ {
+ XEXP (&all.shift, 1) = cint[m];
+ XEXP (&all.shift_mult, 1) = pow2[m];
- XEXP (XEXP (SET_SRC (PATTERN (shiftsub_insn)), 0), 1) = c_int;
- if (recog (PATTERN (shiftsub_insn), shiftsub_insn, &dummy) >= 0)
- shiftsub_cost[m] = rtx_cost (SET_SRC (PATTERN (shiftsub_insn)), SET);
+ shift_cost[mode][m] = rtx_cost (&all.shift, SET);
+ shiftadd_cost[mode][m] = rtx_cost (&all.shift_add, SET);
+ shiftsub_cost[mode][m] = rtx_cost (&all.shift_sub, SET);
+ }
}
-
- end_sequence ();
}
/* Return an rtx representing minus the value of X.
rtx
store_bit_field (rtx str_rtx, unsigned HOST_WIDE_INT bitsize,
unsigned HOST_WIDE_INT bitnum, enum machine_mode fieldmode,
- rtx value, HOST_WIDE_INT total_size)
+ rtx value)
{
unsigned int unit
- = (GET_CODE (str_rtx) == MEM) ? BITS_PER_UNIT : BITS_PER_WORD;
+ = (MEM_P (str_rtx)) ? BITS_PER_UNIT : BITS_PER_WORD;
unsigned HOST_WIDE_INT offset = bitnum / unit;
unsigned HOST_WIDE_INT bitpos = bitnum % unit;
rtx op0 = str_rtx;
enum machine_mode op_mode = mode_for_extraction (EP_insv, 3);
- /* Discount the part of the structure before the desired byte.
- We need to know how many bytes are safe to reference after it. */
- if (total_size >= 0)
- total_size -= (bitpos / BIGGEST_ALIGNMENT
- * (BIGGEST_ALIGNMENT / BITS_PER_UNIT));
-
while (GET_CODE (op0) == SUBREG)
{
/* The following line once was done only if WORDS_BIG_ENDIAN,
op0 = SUBREG_REG (op0);
}
- value = protect_from_queue (value, 0);
-
- /* Use vec_extract patterns for extracting parts of vectors whenever
+ /* Use vec_set patterns for inserting parts of vectors whenever
available. */
if (VECTOR_MODE_P (GET_MODE (op0))
- && GET_CODE (op0) != MEM
+ && !MEM_P (op0)
&& (vec_set_optab->handlers[GET_MODE (op0)].insn_code
!= CODE_FOR_nothing)
&& fieldmode == GET_MODE_INNER (GET_MODE (op0))
if (bitpos == 0
&& bitsize == GET_MODE_BITSIZE (fieldmode)
- && (GET_CODE (op0) != MEM
+ && (!MEM_P (op0)
? ((GET_MODE_SIZE (fieldmode) >= UNITS_PER_WORD
|| GET_MODE_SIZE (GET_MODE (op0)) == GET_MODE_SIZE (fieldmode))
&& byte_offset % GET_MODE_SIZE (fieldmode) == 0)
subregs results in Severe Tire Damage. */
abort ();
}
- if (GET_CODE (op0) == REG)
+ if (REG_P (op0))
op0 = gen_rtx_SUBREG (fieldmode, op0, byte_offset);
else
op0 = adjust_address (op0, fieldmode, offset);
enum machine_mode imode = int_mode_for_mode (GET_MODE (op0));
if (imode != GET_MODE (op0))
{
- if (GET_CODE (op0) == MEM)
+ if (MEM_P (op0))
op0 = adjust_address (op0, imode, 0);
else if (imode != BLKmode)
op0 = gen_lowpart (imode, op0);
/* We may be accessing data outside the field, which means
we can alias adjacent data. */
- if (GET_CODE (op0) == MEM)
+ if (MEM_P (op0))
{
op0 = shallow_copy_rtx (op0);
set_mem_alias_set (op0, 0);
But as we have it, it counts within whatever size OP0 now has.
On a bigendian machine, these are not the same, so convert. */
if (BYTES_BIG_ENDIAN
- && GET_CODE (op0) != MEM
+ && !MEM_P (op0)
&& unit > GET_MODE_BITSIZE (GET_MODE (op0)))
bitpos += unit - GET_MODE_BITSIZE (GET_MODE (op0));
/* Storing an lsb-aligned field in a register
can be done with a movestrict instruction. */
- if (GET_CODE (op0) != MEM
+ if (!MEM_P (op0)
&& (BYTES_BIG_ENDIAN ? bitpos + bitsize == unit : bitpos == 0)
&& bitsize == GET_MODE_BITSIZE (fieldmode)
&& (movstrict_optab->handlers[fieldmode].insn_code
int icode = movstrict_optab->handlers[fieldmode].insn_code;
/* Get appropriate low part of the value being stored. */
- if (GET_CODE (value) == CONST_INT || GET_CODE (value) == REG)
+ if (GET_CODE (value) == CONST_INT || REG_P (value))
value = gen_lowpart (fieldmode, value);
else if (!(GET_CODE (value) == SYMBOL_REF
|| GET_CODE (value) == LABEL_REF
store_bit_field (op0, MIN (BITS_PER_WORD,
bitsize - i * BITS_PER_WORD),
bitnum + bit_offset, word_mode,
- operand_subword_force (value, wordnum, fieldmode),
- total_size);
+ operand_subword_force (value, wordnum, fieldmode));
}
return value;
}
/* OFFSET is the number of words or bytes (UNIT says which)
from STR_RTX to the first word or byte containing part of the field. */
- if (GET_CODE (op0) != MEM)
+ if (!MEM_P (op0))
{
if (offset != 0
|| GET_MODE_SIZE (GET_MODE (op0)) > UNITS_PER_WORD)
{
- if (GET_CODE (op0) != REG)
+ if (!REG_P (op0))
{
/* Since this is a destination (lvalue), we can't copy it to a
pseudo. We can trivially remove a SUBREG that does not
}
offset = 0;
}
- else
- op0 = protect_from_queue (op0, 1);
/* If VALUE is a floating-point mode, access it as an integer of the
corresponding size. This can occur on a machine with 64 bit registers
&& !(bitsize == 1 && GET_CODE (value) == CONST_INT)
/* Ensure insv's size is wide enough for this field. */
&& (GET_MODE_BITSIZE (op_mode) >= bitsize)
- && ! ((GET_CODE (op0) == REG || GET_CODE (op0) == SUBREG)
+ && ! ((REG_P (op0) || GET_CODE (op0) == SUBREG)
&& (bitsize + bitpos > GET_MODE_BITSIZE (op_mode))))
{
int xbitpos = bitpos;
into a register and save it back later. */
/* This used to check flag_force_mem, but that was a serious
de-optimization now that flag_force_mem is enabled by -O2. */
- if (GET_CODE (op0) == MEM
+ if (MEM_P (op0)
&& ! ((*insn_data[(int) CODE_FOR_insv].operand[0].predicate)
(op0, VOIDmode)))
{
/* Fetch that unit, store the bitfield in it, then store
the unit. */
tempreg = copy_to_reg (op0);
- store_bit_field (tempreg, bitsize, bitpos, fieldmode, value,
- total_size);
+ store_bit_field (tempreg, bitsize, bitpos, fieldmode, value);
emit_move_insn (op0, tempreg);
return value;
}
volatile_ok = save_volatile_ok;
/* Add OFFSET into OP0's address. */
- if (GET_CODE (xop0) == MEM)
+ if (MEM_P (xop0))
xop0 = adjust_address (xop0, byte_mode, offset);
/* If xop0 is a register, we need it in MAXMODE
/* We can't just change the mode, because this might clobber op0,
and we will need the original value of op0 if insv fails. */
xop0 = gen_rtx_SUBREG (maxmode, SUBREG_REG (xop0), SUBREG_BYTE (xop0));
- if (GET_CODE (xop0) == REG && GET_MODE (xop0) != maxmode)
+ if (REG_P (xop0) && GET_MODE (xop0) != maxmode)
xop0 = gen_rtx_SUBREG (maxmode, xop0, 0);
/* On big-endian machines, we count bits from the most significant.
/* We have been counting XBITPOS within UNIT.
Count instead within the size of the register. */
- if (BITS_BIG_ENDIAN && GET_CODE (xop0) != MEM)
+ if (BITS_BIG_ENDIAN && !MEM_P (xop0))
xbitpos += GET_MODE_BITSIZE (maxmode) - unit;
unit = GET_MODE_BITSIZE (maxmode);
The field starts at position BITPOS within the byte.
(If OP0 is a register, it may be a full word or a narrower mode,
but BITPOS still counts within a full word,
- which is significant on bigendian machines.)
-
- Note that protect_from_queue has already been done on OP0 and VALUE. */
+ which is significant on bigendian machines.) */
static void
store_fixed_bit_field (rtx op0, unsigned HOST_WIDE_INT offset,
and a field split across two bytes.
Such cases are not supposed to be able to occur. */
- if (GET_CODE (op0) == REG || GET_CODE (op0) == SUBREG)
+ if (REG_P (op0) || GET_CODE (op0) == SUBREG)
{
if (offset != 0)
abort ();
if (GET_MODE (value) != mode)
{
- if ((GET_CODE (value) == REG || GET_CODE (value) == SUBREG)
+ if ((REG_P (value) || GET_CODE (value) == SUBREG)
&& GET_MODE_SIZE (mode) < GET_MODE_SIZE (GET_MODE (value)))
value = gen_lowpart (mode, value);
else
NULL_RTX, 1, OPTAB_LIB_WIDEN);
if (bitpos > 0)
value = expand_shift (LSHIFT_EXPR, mode, value,
- build_int_2 (bitpos, 0), NULL_RTX, 1);
+ build_int_cst (NULL_TREE,
+ bitpos, 0), NULL_RTX, 1);
}
/* Now clear the chosen bits in OP0,
except that if VALUE is -1 we need not bother. */
- subtarget = (GET_CODE (op0) == REG || ! flag_force_mem) ? op0 : 0;
+ subtarget = (REG_P (op0) || ! flag_force_mem) ? op0 : 0;
if (! all_one)
{
/* Make sure UNIT isn't larger than BITS_PER_WORD, we can only handle that
much at a time. */
- if (GET_CODE (op0) == REG || GET_CODE (op0) == SUBREG)
+ if (REG_P (op0) || GET_CODE (op0) == SUBREG)
unit = BITS_PER_WORD;
else
unit = MIN (MEM_ALIGN (op0), BITS_PER_WORD);
? GET_MODE (value)
: word_mode, value));
}
- else if (GET_CODE (value) == ADDRESSOF)
- value = copy_to_reg (value);
while (bitsdone < bitsize)
{
/* We must do an endian conversion exactly the same way as it is
done in extract_bit_field, so that the two calls to
extract_fixed_bit_field will have comparable arguments. */
- if (GET_CODE (value) != MEM || GET_MODE (value) == BLKmode)
+ if (!MEM_P (value) || GET_MODE (value) == BLKmode)
total_bits = BITS_PER_WORD;
else
total_bits = GET_MODE_BITSIZE (GET_MODE (value));
GET_MODE (SUBREG_REG (op0)));
offset = 0;
}
- else if (GET_CODE (op0) == REG)
+ else if (REG_P (op0))
{
word = operand_subword_force (op0, offset, GET_MODE (op0));
offset = 0;
containing BITSIZE bits, starting at BITNUM,
and put it in TARGET if possible (if TARGET is nonzero).
Regardless of TARGET, we return the rtx for where the value is placed.
- It may be a QUEUED.
STR_RTX is the structure containing the byte (a REG or MEM).
UNSIGNEDP is nonzero if this is an unsigned bit field.
rtx
extract_bit_field (rtx str_rtx, unsigned HOST_WIDE_INT bitsize,
unsigned HOST_WIDE_INT bitnum, int unsignedp, rtx target,
- enum machine_mode mode, enum machine_mode tmode,
- HOST_WIDE_INT total_size)
+ enum machine_mode mode, enum machine_mode tmode)
{
unsigned int unit
- = (GET_CODE (str_rtx) == MEM) ? BITS_PER_UNIT : BITS_PER_WORD;
+ = (MEM_P (str_rtx)) ? BITS_PER_UNIT : BITS_PER_WORD;
unsigned HOST_WIDE_INT offset = bitnum / unit;
unsigned HOST_WIDE_INT bitpos = bitnum % unit;
rtx op0 = str_rtx;
enum machine_mode mode1;
int byte_offset;
- /* Discount the part of the structure before the desired byte.
- We need to know how many bytes are safe to reference after it. */
- if (total_size >= 0)
- total_size -= (bitpos / BIGGEST_ALIGNMENT
- * (BIGGEST_ALIGNMENT / BITS_PER_UNIT));
-
if (tmode == VOIDmode)
tmode = mode;
op0 = SUBREG_REG (op0);
}
- if (GET_CODE (op0) == REG
+ if (REG_P (op0)
&& mode == GET_MODE (op0)
&& bitnum == 0
&& bitsize == GET_MODE_BITSIZE (GET_MODE (op0)))
/* Use vec_extract patterns for extracting parts of vectors whenever
available. */
if (VECTOR_MODE_P (GET_MODE (op0))
- && GET_CODE (op0) != MEM
+ && !MEM_P (op0)
&& (vec_extract_optab->handlers[GET_MODE (op0)].insn_code
!= CODE_FOR_nothing)
- && ((bitsize + bitnum) / GET_MODE_BITSIZE (GET_MODE_INNER (GET_MODE (op0)))
- == bitsize / GET_MODE_BITSIZE (GET_MODE_INNER (GET_MODE (op0)))))
+ && ((bitnum + bitsize - 1) / GET_MODE_BITSIZE (GET_MODE_INNER (GET_MODE (op0)))
+ == bitnum / GET_MODE_BITSIZE (GET_MODE_INNER (GET_MODE (op0)))))
{
enum machine_mode outermode = GET_MODE (op0);
enum machine_mode innermode = GET_MODE_INNER (outermode);
int icode = (int) vec_extract_optab->handlers[outermode].insn_code;
- int pos = bitnum / GET_MODE_BITSIZE (innermode);
+ unsigned HOST_WIDE_INT pos = bitnum / GET_MODE_BITSIZE (innermode);
rtx rtxpos = GEN_INT (pos);
rtx src = op0;
rtx dest = NULL, pat, seq;
enum machine_mode imode = int_mode_for_mode (GET_MODE (op0));
if (imode != GET_MODE (op0))
{
- if (GET_CODE (op0) == MEM)
+ if (MEM_P (op0))
op0 = adjust_address (op0, imode, 0);
else if (imode != BLKmode)
op0 = gen_lowpart (imode, op0);
/* We may be accessing data outside the field, which means
we can alias adjacent data. */
- if (GET_CODE (op0) == MEM)
+ if (MEM_P (op0))
{
op0 = shallow_copy_rtx (op0);
set_mem_alias_set (op0, 0);
But as we have it, it counts within whatever size OP0 now has.
On a bigendian machine, these are not the same, so convert. */
if (BYTES_BIG_ENDIAN
- && GET_CODE (op0) != MEM
+ && !MEM_P (op0)
&& unit > GET_MODE_BITSIZE (GET_MODE (op0)))
bitpos += unit - GET_MODE_BITSIZE (GET_MODE (op0));
&& (BYTES_BIG_ENDIAN
? bitpos + bitsize == BITS_PER_WORD
: bitpos == 0)))
- && ((GET_CODE (op0) != MEM
+ && ((!MEM_P (op0)
&& TRULY_NOOP_TRUNCATION (GET_MODE_BITSIZE (mode),
GET_MODE_BITSIZE (GET_MODE (op0)))
&& GET_MODE_SIZE (mode1) != 0
&& byte_offset % GET_MODE_SIZE (mode1) == 0)
- || (GET_CODE (op0) == MEM
+ || (MEM_P (op0)
&& (! SLOW_UNALIGNED_ACCESS (mode, MEM_ALIGN (op0))
|| (offset * BITS_PER_UNIT % bitsize == 0
&& MEM_ALIGN (op0) % bitsize == 0)))))
subregs results in Severe Tire Damage. */
goto no_subreg_mode_swap;
}
- if (GET_CODE (op0) == REG)
+ if (REG_P (op0))
op0 = gen_rtx_SUBREG (mode1, op0, byte_offset);
else
op0 = adjust_address (op0, mode1, offset);
unsigned int nwords = (bitsize + (BITS_PER_WORD - 1)) / BITS_PER_WORD;
unsigned int i;
- if (target == 0 || GET_CODE (target) != REG)
+ if (target == 0 || !REG_P (target))
target = gen_reg_rtx (mode);
/* Indicate for flow that the entire target reg is being set. */
= extract_bit_field (op0, MIN (BITS_PER_WORD,
bitsize - i * BITS_PER_WORD),
bitnum + bit_offset, 1, target_part, mode,
- word_mode, total_size);
+ word_mode);
if (target_part == 0)
abort ();
/* Signed bit field: sign-extend with two arithmetic shifts. */
target = expand_shift (LSHIFT_EXPR, mode, target,
- build_int_2 (GET_MODE_BITSIZE (mode) - bitsize, 0),
+ build_int_cst (NULL_TREE,
+ GET_MODE_BITSIZE (mode) - bitsize,
+ 0),
NULL_RTX, 0);
return expand_shift (RSHIFT_EXPR, mode, target,
- build_int_2 (GET_MODE_BITSIZE (mode) - bitsize, 0),
+ build_int_cst (NULL_TREE,
+ GET_MODE_BITSIZE (mode) - bitsize,
+ 0),
NULL_RTX, 0);
}
/* OFFSET is the number of words or bytes (UNIT says which)
from STR_RTX to the first word or byte containing part of the field. */
- if (GET_CODE (op0) != MEM)
+ if (!MEM_P (op0))
{
if (offset != 0
|| GET_MODE_SIZE (GET_MODE (op0)) > UNITS_PER_WORD)
{
- if (GET_CODE (op0) != REG)
+ if (!REG_P (op0))
op0 = copy_to_reg (op0);
op0 = gen_rtx_SUBREG (mode_for_size (BITS_PER_WORD, MODE_INT, 0),
op0, (offset * UNITS_PER_WORD));
}
offset = 0;
}
- else
- op0 = protect_from_queue (str_rtx, 1);
/* Now OFFSET is nonzero only for memory operands. */
{
if (HAVE_extzv
&& (GET_MODE_BITSIZE (extzv_mode) >= bitsize)
- && ! ((GET_CODE (op0) == REG || GET_CODE (op0) == SUBREG)
+ && ! ((REG_P (op0) || GET_CODE (op0) == SUBREG)
&& (bitsize + bitpos > GET_MODE_BITSIZE (extzv_mode))))
{
unsigned HOST_WIDE_INT xbitpos = bitpos, xoffset = offset;
rtx pat;
enum machine_mode maxmode = mode_for_extraction (EP_extzv, 0);
- if (GET_CODE (xop0) == MEM)
+ if (MEM_P (xop0))
{
int save_volatile_ok = volatile_ok;
volatile_ok = 1;
SImode). to make it acceptable to the format of extzv. */
if (GET_CODE (xop0) == SUBREG && GET_MODE (xop0) != maxmode)
goto extzv_loses;
- if (GET_CODE (xop0) == REG && GET_MODE (xop0) != maxmode)
+ if (REG_P (xop0) && GET_MODE (xop0) != maxmode)
xop0 = gen_rtx_SUBREG (maxmode, xop0, 0);
/* On big-endian machines, we count bits from the most significant.
xbitpos = unit - bitsize - xbitpos;
/* Now convert from counting within UNIT to counting in MAXMODE. */
- if (BITS_BIG_ENDIAN && GET_CODE (xop0) != MEM)
+ if (BITS_BIG_ENDIAN && !MEM_P (xop0))
xbitpos += GET_MODE_BITSIZE (maxmode) - unit;
unit = GET_MODE_BITSIZE (maxmode);
if (xtarget == 0
- || (flag_force_mem && GET_CODE (xtarget) == MEM))
+ || (flag_force_mem && MEM_P (xtarget)))
xtarget = xspec_target = gen_reg_rtx (tmode);
if (GET_MODE (xtarget) != maxmode)
{
- if (GET_CODE (xtarget) == REG)
+ if (REG_P (xtarget))
{
int wider = (GET_MODE_SIZE (maxmode)
> GET_MODE_SIZE (GET_MODE (xtarget)));
bitsize_rtx = GEN_INT (bitsize);
bitpos_rtx = GEN_INT (xbitpos);
- pat = gen_extzv (protect_from_queue (xtarget, 1),
- xop0, bitsize_rtx, bitpos_rtx);
+ pat = gen_extzv (xtarget, xop0, bitsize_rtx, bitpos_rtx);
if (pat)
{
emit_insn (pat);
{
if (HAVE_extv
&& (GET_MODE_BITSIZE (extv_mode) >= bitsize)
- && ! ((GET_CODE (op0) == REG || GET_CODE (op0) == SUBREG)
+ && ! ((REG_P (op0) || GET_CODE (op0) == SUBREG)
&& (bitsize + bitpos > GET_MODE_BITSIZE (extv_mode))))
{
int xbitpos = bitpos, xoffset = offset;
rtx pat;
enum machine_mode maxmode = mode_for_extraction (EP_extv, 0);
- if (GET_CODE (xop0) == MEM)
+ if (MEM_P (xop0))
{
/* Is the memory operand acceptable? */
if (! ((*insn_data[(int) CODE_FOR_extv].operand[1].predicate)
SImode) to make it acceptable to the format of extv. */
if (GET_CODE (xop0) == SUBREG && GET_MODE (xop0) != maxmode)
goto extv_loses;
- if (GET_CODE (xop0) == REG && GET_MODE (xop0) != maxmode)
+ if (REG_P (xop0) && GET_MODE (xop0) != maxmode)
xop0 = gen_rtx_SUBREG (maxmode, xop0, 0);
/* On big-endian machines, we count bits from the most significant.
/* XBITPOS counts within a size of UNIT.
Adjust to count within a size of MAXMODE. */
- if (BITS_BIG_ENDIAN && GET_CODE (xop0) != MEM)
+ if (BITS_BIG_ENDIAN && !MEM_P (xop0))
xbitpos += (GET_MODE_BITSIZE (maxmode) - unit);
unit = GET_MODE_BITSIZE (maxmode);
if (xtarget == 0
- || (flag_force_mem && GET_CODE (xtarget) == MEM))
+ || (flag_force_mem && MEM_P (xtarget)))
xtarget = xspec_target = gen_reg_rtx (tmode);
if (GET_MODE (xtarget) != maxmode)
{
- if (GET_CODE (xtarget) == REG)
+ if (REG_P (xtarget))
{
int wider = (GET_MODE_SIZE (maxmode)
> GET_MODE_SIZE (GET_MODE (xtarget)));
bitsize_rtx = GEN_INT (bitsize);
bitpos_rtx = GEN_INT (xbitpos);
- pat = gen_extv (protect_from_queue (xtarget, 1),
- xop0, bitsize_rtx, bitpos_rtx);
+ pat = gen_extv (xtarget, xop0, bitsize_rtx, bitpos_rtx);
if (pat)
{
emit_insn (pat);
unsigned int total_bits = BITS_PER_WORD;
enum machine_mode mode;
- if (GET_CODE (op0) == SUBREG || GET_CODE (op0) == REG)
+ if (GET_CODE (op0) == SUBREG || REG_P (op0))
{
/* Special treatment for a bit field split across two registers. */
if (bitsize + bitpos > BITS_PER_WORD)
{
/* If the field does not already start at the lsb,
shift it so it does. */
- tree amount = build_int_2 (bitpos, 0);
+ tree amount = build_int_cst (NULL_TREE, bitpos, 0);
/* Maybe propagate the target for the shift. */
/* But not if we will return it--could confuse integrate.c. */
- rtx subtarget = (target != 0 && GET_CODE (target) == REG ? target : 0);
+ rtx subtarget = (target != 0 && REG_P (target) ? target : 0);
if (tmode != mode) subtarget = 0;
op0 = expand_shift (RSHIFT_EXPR, mode, op0, amount, subtarget, 1);
}
if (GET_MODE_BITSIZE (mode) != (bitsize + bitpos))
{
tree amount
- = build_int_2 (GET_MODE_BITSIZE (mode) - (bitsize + bitpos), 0);
+ = build_int_cst (NULL_TREE,
+ GET_MODE_BITSIZE (mode) - (bitsize + bitpos), 0);
/* Maybe propagate the target for the shift. */
- rtx subtarget = (target != 0 && GET_CODE (target) == REG ? target : 0);
+ rtx subtarget = (target != 0 && REG_P (target) ? target : 0);
op0 = expand_shift (LSHIFT_EXPR, mode, op0, amount, subtarget, 1);
}
return expand_shift (RSHIFT_EXPR, mode, op0,
- build_int_2 (GET_MODE_BITSIZE (mode) - bitsize, 0),
+ build_int_cst (NULL_TREE,
+ GET_MODE_BITSIZE (mode) - bitsize, 0),
target, 0);
}
\f
/* Make sure UNIT isn't larger than BITS_PER_WORD, we can only handle that
much at a time. */
- if (GET_CODE (op0) == REG || GET_CODE (op0) == SUBREG)
+ if (REG_P (op0) || GET_CODE (op0) == SUBREG)
unit = BITS_PER_WORD;
else
unit = MIN (MEM_ALIGN (op0), BITS_PER_WORD);
GET_MODE (SUBREG_REG (op0)));
offset = 0;
}
- else if (GET_CODE (op0) == REG)
+ else if (REG_P (op0))
{
word = operand_subword_force (op0, offset, GET_MODE (op0));
offset = 0;
{
if (bitsize != bitsdone)
part = expand_shift (LSHIFT_EXPR, word_mode, part,
- build_int_2 (bitsize - bitsdone, 0), 0, 1);
+ build_int_cst (NULL_TREE,
+ bitsize - bitsdone, 0), 0, 1);
}
else
{
if (bitsdone != thissize)
part = expand_shift (LSHIFT_EXPR, word_mode, part,
- build_int_2 (bitsdone - thissize, 0), 0, 1);
+ build_int_cst (NULL_TREE,
+ bitsdone - thissize, 0), 0, 1);
}
if (first)
return result;
/* Signed bit field: sign-extend with two arithmetic shifts. */
result = expand_shift (LSHIFT_EXPR, word_mode, result,
- build_int_2 (BITS_PER_WORD - bitsize, 0),
+ build_int_cst (NULL_TREE,
+ BITS_PER_WORD - bitsize, 0),
NULL_RTX, 0);
return expand_shift (RSHIFT_EXPR, word_mode, result,
- build_int_2 (BITS_PER_WORD - bitsize, 0), NULL_RTX, 0);
+ build_int_cst (NULL_TREE,
+ BITS_PER_WORD - bitsize, 0), NULL_RTX, 0);
}
\f
/* Add INC into TARGET. */
if (op1 == const0_rtx)
return shifted;
+ /* Check whether its cheaper to implement a left shift by a constant
+ bit count by a sequence of additions. */
+ if (code == LSHIFT_EXPR
+ && GET_CODE (op1) == CONST_INT
+ && INTVAL (op1) > 0
+ && INTVAL (op1) < GET_MODE_BITSIZE (mode)
+ && shift_cost[mode][INTVAL (op1)] > INTVAL (op1) * add_cost[mode])
+ {
+ int i;
+ for (i = 0; i < INTVAL (op1); i++)
+ {
+ temp = force_reg (mode, shifted);
+ shifted = expand_binop (mode, add_optab, temp, temp, NULL_RTX,
+ unsignedp, OPTAB_LIB_WIDEN);
+ }
+ return shifted;
+ }
+
for (try = 0; temp == 0 && try < 3; try++)
{
enum optab_methods methods;
tree type = TREE_TYPE (amount);
tree new_amount = make_tree (type, op1);
tree other_amount
- = fold (build (MINUS_EXPR, type,
- convert (type,
- build_int_2 (GET_MODE_BITSIZE (mode),
- 0)),
- amount));
+ = fold (build2 (MINUS_EXPR, type, convert
+ (type, build_int_cst
+ (NULL_TREE, GET_MODE_BITSIZE (mode), 0)),
+ amount));
shifted = force_reg (mode, shifted);
struct algorithm *alg_in, *best_alg;
int cost;
unsigned HOST_WIDE_INT q;
+ int maxm = MIN (BITS_PER_WORD, GET_MODE_BITSIZE (mode));
/* Indicate that no algorithm is yet found. If no algorithm
is found, this value will be returned and indicate failure. */
if (cost_limit <= 0)
return;
+ /* Restrict the bits of "t" to the multiplication's mode. */
+ t &= GET_MODE_MASK (mode);
+
/* t == 1 can be done in zero cost. */
if (t == 1)
{
if ((t & 1) == 0)
{
m = floor_log2 (t & -t); /* m = number of low zero bits */
- if (m < BITS_PER_WORD)
+ if (m < maxm)
{
q = t >> m;
- cost = shift_cost[m];
+ /* The function expand_shift will choose between a shift and
+ a sequence of additions, so the observed cost is given as
+ MIN (m * add_cost[mode], shift_cost[mode][m]). */
+ cost = m * add_cost[mode];
+ if (shift_cost[mode][m] < cost)
+ cost = shift_cost[mode][m];
synth_mult (alg_in, q, cost_limit - cost, mode);
cost += alg_in->cost;
unsigned HOST_WIDE_INT d;
d = ((unsigned HOST_WIDE_INT) 1 << m) + 1;
- if (t % d == 0 && t > d && m < BITS_PER_WORD)
+ if (t % d == 0 && t > d && m < maxm)
{
- cost = add_cost[mode] + shift_cost[m];
- if (shiftadd_cost[m] < cost)
- cost = shiftadd_cost[m];
+ cost = add_cost[mode] + shift_cost[mode][m];
+ if (shiftadd_cost[mode][m] < cost)
+ cost = shiftadd_cost[mode][m];
synth_mult (alg_in, t / d, cost_limit - cost, mode);
cost += alg_in->cost;
}
d = ((unsigned HOST_WIDE_INT) 1 << m) - 1;
- if (t % d == 0 && t > d && m < BITS_PER_WORD)
+ if (t % d == 0 && t > d && m < maxm)
{
- cost = add_cost[mode] + shift_cost[m];
- if (shiftsub_cost[m] < cost)
- cost = shiftsub_cost[m];
+ cost = add_cost[mode] + shift_cost[mode][m];
+ if (shiftsub_cost[mode][m] < cost)
+ cost = shiftsub_cost[mode][m];
synth_mult (alg_in, t / d, cost_limit - cost, mode);
cost += alg_in->cost;
q = t - 1;
q = q & -q;
m = exact_log2 (q);
- if (m >= 0 && m < BITS_PER_WORD)
+ if (m >= 0 && m < maxm)
{
- cost = shiftadd_cost[m];
+ cost = shiftadd_cost[mode][m];
synth_mult (alg_in, (t - 1) >> m, cost_limit - cost, mode);
cost += alg_in->cost;
q = t + 1;
q = q & -q;
m = exact_log2 (q);
- if (m >= 0 && m < BITS_PER_WORD)
+ if (m >= 0 && m < maxm)
{
- cost = shiftsub_cost[m];
+ cost = shiftsub_cost[mode][m];
synth_mult (alg_in, (t + 1) >> m, cost_limit - cost, mode);
cost += alg_in->cost;
int opno;
enum machine_mode nmode;
- /* op0 must be register to make mult_cost match the precomputed
- shiftadd_cost array. */
- op0 = protect_from_queue (op0, 0);
-
/* Avoid referencing memory over and over.
For speed, but also for correctness when mem is volatile. */
- if (GET_CODE (op0) == MEM)
+ if (MEM_P (op0))
op0 = force_reg (mode, op0);
/* ACCUM starts out either as OP0 or as a zero, depending on
for (opno = 1; opno < alg->ops; opno++)
{
int log = alg->log[opno];
- int preserve = preserve_subexpressions_p ();
- rtx shift_subtarget = preserve ? 0 : accum;
+ rtx shift_subtarget = optimize ? 0 : accum;
rtx add_target
= (opno == alg->ops - 1 && target != 0 && variant != add_variant
- && ! preserve)
+ && !optimize)
? target : 0;
- rtx accum_target = preserve ? 0 : accum;
+ rtx accum_target = optimize ? 0 : accum;
switch (alg->op[opno])
{
case alg_shift:
accum = expand_shift (LSHIFT_EXPR, mode, accum,
- build_int_2 (log, 0), NULL_RTX, 0);
+ build_int_cst (NULL_TREE, log, 0),
+ NULL_RTX, 0);
val_so_far <<= log;
break;
case alg_add_t_m2:
tem = expand_shift (LSHIFT_EXPR, mode, op0,
- build_int_2 (log, 0), NULL_RTX, 0);
+ build_int_cst (NULL_TREE, log, 0),
+ NULL_RTX, 0);
accum = force_operand (gen_rtx_PLUS (mode, accum, tem),
add_target ? add_target : accum_target);
val_so_far += (HOST_WIDE_INT) 1 << log;
case alg_sub_t_m2:
tem = expand_shift (LSHIFT_EXPR, mode, op0,
- build_int_2 (log, 0), NULL_RTX, 0);
+ build_int_cst (NULL_TREE, log, 0),
+ NULL_RTX, 0);
accum = force_operand (gen_rtx_MINUS (mode, accum, tem),
add_target ? add_target : accum_target);
val_so_far -= (HOST_WIDE_INT) 1 << log;
case alg_add_t2_m:
accum = expand_shift (LSHIFT_EXPR, mode, accum,
- build_int_2 (log, 0), shift_subtarget,
+ build_int_cst (NULL_TREE, log, 0),
+ shift_subtarget,
0);
accum = force_operand (gen_rtx_PLUS (mode, accum, op0),
add_target ? add_target : accum_target);
case alg_sub_t2_m:
accum = expand_shift (LSHIFT_EXPR, mode, accum,
- build_int_2 (log, 0), shift_subtarget, 0);
+ build_int_cst (NULL_TREE, log, 0),
+ shift_subtarget, 0);
accum = force_operand (gen_rtx_MINUS (mode, accum, op0),
add_target ? add_target : accum_target);
val_so_far = (val_so_far << log) - 1;
case alg_add_factor:
tem = expand_shift (LSHIFT_EXPR, mode, accum,
- build_int_2 (log, 0), NULL_RTX, 0);
+ build_int_cst (NULL_TREE, log, 0),
+ NULL_RTX, 0);
accum = force_operand (gen_rtx_PLUS (mode, accum, tem),
add_target ? add_target : accum_target);
val_so_far += val_so_far << log;
case alg_sub_factor:
tem = expand_shift (LSHIFT_EXPR, mode, accum,
- build_int_2 (log, 0), NULL_RTX, 0);
+ build_int_cst (NULL_TREE, log, 0),
+ NULL_RTX, 0);
accum = force_operand (gen_rtx_MINUS (mode, tem, accum),
- (add_target ? add_target
- : preserve ? 0 : tem));
+ (add_target
+ ? add_target : (optimize ? 0 : tem)));
val_so_far = (val_so_far << log) - val_so_far;
break;
accum = force_operand (gen_rtx_PLUS (mode, accum, op0), target);
}
+ /* Compare only the bits of val and val_so_far that are significant
+ in the result mode, to avoid sign-/zero-extension confusion. */
+ val &= GET_MODE_MASK (mode);
+ val_so_far &= GET_MODE_MASK (mode);
if (val != val_so_far)
abort ();
&& (unsignedp || !flag_trapv))
{
int mult_cost = rtx_cost (gen_rtx_MULT (mode, op0, op1), SET);
- mult_cost = MIN (12 * add_cost[mode], mult_cost);
if (choose_mult_variant (mode, INTVAL (const_op1), &algorithm, &variant,
mult_cost))
enum rtx_code adj_code = unsignedp ? PLUS : MINUS;
tem = expand_shift (RSHIFT_EXPR, mode, op0,
- build_int_2 (GET_MODE_BITSIZE (mode) - 1, 0),
+ build_int_cst (NULL_TREE,
+ GET_MODE_BITSIZE (mode) - 1, 0),
NULL_RTX, 0);
tem = expand_and (mode, tem, op1, NULL_RTX);
adj_operand
adj_operand);
tem = expand_shift (RSHIFT_EXPR, mode, op1,
- build_int_2 (GET_MODE_BITSIZE (mode) - 1, 0),
+ build_int_cst (NULL_TREE,
+ GET_MODE_BITSIZE (mode) - 1, 0),
NULL_RTX, 0);
tem = expand_and (mode, tem, op0, NULL_RTX);
target = force_operand (gen_rtx_fmt_ee (adj_code, mode, adj_operand, tem),
wider_mode = GET_MODE_WIDER_MODE (mode);
op = expand_shift (RSHIFT_EXPR, wider_mode, op,
- build_int_2 (GET_MODE_BITSIZE (mode), 0), 0, 1);
+ build_int_cst (NULL_TREE,
+ GET_MODE_BITSIZE (mode), 0), 0, 1);
return convert_modes (mode, wider_mode, op, 0);
}
/* Secondly, same as above, but use sign flavor opposite of unsignedp.
Need to adjust the result after the multiplication. */
if (size - 1 < BITS_PER_WORD
- && (mul_highpart_cost[mode] + 2 * shift_cost[size-1]
+ && (mul_highpart_cost[mode] + 2 * shift_cost[mode][size-1]
+ 4 * add_cost[mode] < max_cost))
{
moptab = unsignedp ? smul_highpart_optab : umul_highpart_optab;
moptab = smul_optab;
if (smul_optab->handlers[wider_mode].insn_code != CODE_FOR_nothing
&& size - 1 < BITS_PER_WORD
- && mul_cost[wider_mode] + shift_cost[size-1] < max_cost)
+ && mul_cost[wider_mode] + shift_cost[mode][size-1] < max_cost)
{
tem = expand_binop (wider_mode, moptab, op0, op1, 0,
unsignedp, OPTAB_WIDEN);
moptab = unsignedp ? smul_widen_optab : umul_widen_optab;
if (moptab->handlers[wider_mode].insn_code != CODE_FOR_nothing
&& size - 1 < BITS_PER_WORD
- && (mul_widen_cost[wider_mode] + 2 * shift_cost[size-1]
+ && (mul_widen_cost[wider_mode] + 2 * shift_cost[mode][size-1]
+ 4 * add_cost[mode] < max_cost))
{
tem = expand_binop (wider_mode, moptab, op0, narrow_op1,
return expand_mult_highpart_optab (mode, op0, op1, target,
unsignedp, max_cost);
- extra_cost = shift_cost[GET_MODE_BITSIZE (mode) - 1];
+ extra_cost = shift_cost[mode][GET_MODE_BITSIZE (mode) - 1];
/* Check whether we try to multiply by a negative constant. */
if (!unsignedp && ((cnst1 >> (GET_MODE_BITSIZE (mode) - 1)) & 1))
return expand_mult_highpart_optab (mode, op0, op1, target,
unsignedp, max_cost);
}
+
+
+/* Expand signed modulus of OP0 by a power of two D in mode MODE. */
+
+static rtx
+expand_smod_pow2 (enum machine_mode mode, rtx op0, HOST_WIDE_INT d)
+{
+ unsigned HOST_WIDE_INT mask;
+ rtx result, temp, shift, label;
+ int logd;
+
+ logd = floor_log2 (d);
+ result = gen_reg_rtx (mode);
+
+ /* Avoid conditional branches when they're expensive. */
+ if (BRANCH_COST >= 2
+ && !optimize_size)
+ {
+ rtx signmask = emit_store_flag (result, LT, op0, const0_rtx,
+ mode, 0, -1);
+ if (signmask)
+ {
+ signmask = force_reg (mode, signmask);
+ mask = ((HOST_WIDE_INT) 1 << logd) - 1;
+ shift = GEN_INT (GET_MODE_BITSIZE (mode) - logd);
+
+ /* Use the rtx_cost of a LSHIFTRT instruction to determine
+ which instruction sequence to use. If logical right shifts
+ are expensive the use 2 XORs, 2 SUBs and an AND, otherwise
+ use a LSHIFTRT, 1 ADD, 1 SUB and an AND. */
+
+ temp = gen_rtx_LSHIFTRT (mode, result, shift);
+ if (lshr_optab->handlers[mode].insn_code == CODE_FOR_nothing
+ || rtx_cost (temp, SET) > COSTS_N_INSNS (2))
+ {
+ temp = expand_binop (mode, xor_optab, op0, signmask,
+ NULL_RTX, 1, OPTAB_LIB_WIDEN);
+ temp = expand_binop (mode, sub_optab, temp, signmask,
+ NULL_RTX, 1, OPTAB_LIB_WIDEN);
+ temp = expand_binop (mode, and_optab, temp, GEN_INT (mask),
+ NULL_RTX, 1, OPTAB_LIB_WIDEN);
+ temp = expand_binop (mode, xor_optab, temp, signmask,
+ NULL_RTX, 1, OPTAB_LIB_WIDEN);
+ temp = expand_binop (mode, sub_optab, temp, signmask,
+ NULL_RTX, 1, OPTAB_LIB_WIDEN);
+ }
+ else
+ {
+ signmask = expand_binop (mode, lshr_optab, signmask, shift,
+ NULL_RTX, 1, OPTAB_LIB_WIDEN);
+ signmask = force_reg (mode, signmask);
+
+ temp = expand_binop (mode, add_optab, op0, signmask,
+ NULL_RTX, 1, OPTAB_LIB_WIDEN);
+ temp = expand_binop (mode, and_optab, temp, GEN_INT (mask),
+ NULL_RTX, 1, OPTAB_LIB_WIDEN);
+ temp = expand_binop (mode, sub_optab, temp, signmask,
+ NULL_RTX, 1, OPTAB_LIB_WIDEN);
+ }
+ return temp;
+ }
+ }
+
+ /* Mask contains the mode's signbit and the significant bits of the
+ modulus. By including the signbit in the operation, many targets
+ can avoid an explicit compare operation in the following comparison
+ against zero. */
+
+ mask = (HOST_WIDE_INT) -1 << (GET_MODE_BITSIZE (mode) - 1)
+ | (((HOST_WIDE_INT) 1 << logd) - 1);
+
+ temp = expand_binop (mode, and_optab, op0, GEN_INT (mask), result,
+ 1, OPTAB_LIB_WIDEN);
+ if (temp != result)
+ emit_move_insn (result, temp);
+
+ label = gen_label_rtx ();
+ do_cmp_and_jump (result, const0_rtx, GE, mode, label);
+
+ temp = expand_binop (mode, sub_optab, result, const1_rtx, result,
+ 0, OPTAB_LIB_WIDEN);
+ mask = (HOST_WIDE_INT) -1 << logd;
+ temp = expand_binop (mode, ior_optab, temp, GEN_INT (mask), result,
+ 1, OPTAB_LIB_WIDEN);
+ temp = expand_binop (mode, add_optab, temp, const1_rtx, result,
+ 0, OPTAB_LIB_WIDEN);
+ if (temp != result)
+ emit_move_insn (result, temp);
+ emit_label (label);
+ return result;
+}
+
+/* Expand signed division of OP0 by a power of two D in mode MODE.
+ This routine is only called for positive values of D. */
+
+static rtx
+expand_sdiv_pow2 (enum machine_mode mode, rtx op0, HOST_WIDE_INT d)
+{
+ rtx temp, label;
+ tree shift;
+ int logd;
+
+ logd = floor_log2 (d);
+ shift = build_int_cst (NULL_TREE, logd, 0);
+
+ if (d == 2 && BRANCH_COST >= 1)
+ {
+ temp = gen_reg_rtx (mode);
+ temp = emit_store_flag (temp, LT, op0, const0_rtx, mode, 0, 1);
+ temp = expand_binop (mode, add_optab, temp, op0, NULL_RTX,
+ 0, OPTAB_LIB_WIDEN);
+ return expand_shift (RSHIFT_EXPR, mode, temp, shift, NULL_RTX, 0);
+ }
+
+#ifdef HAVE_conditional_move
+ if (BRANCH_COST >= 2)
+ {
+ rtx temp2;
+
+ start_sequence ();
+ temp2 = copy_to_mode_reg (mode, op0);
+ temp = expand_binop (mode, add_optab, temp2, GEN_INT (d-1),
+ NULL_RTX, 0, OPTAB_LIB_WIDEN);
+ temp = force_reg (mode, temp);
+
+ /* Construct "temp2 = (temp2 < 0) ? temp : temp2". */
+ temp2 = emit_conditional_move (temp2, LT, temp2, const0_rtx,
+ mode, temp, temp2, mode, 0);
+ if (temp2)
+ {
+ rtx seq = get_insns ();
+ end_sequence ();
+ emit_insn (seq);
+ return expand_shift (RSHIFT_EXPR, mode, temp2, shift, NULL_RTX, 0);
+ }
+ end_sequence ();
+ }
+#endif
+
+ if (BRANCH_COST >= 2)
+ {
+ int ushift = GET_MODE_BITSIZE (mode) - logd;
+
+ temp = gen_reg_rtx (mode);
+ temp = emit_store_flag (temp, LT, op0, const0_rtx, mode, 0, -1);
+ if (shift_cost[mode][ushift] > COSTS_N_INSNS (1))
+ temp = expand_binop (mode, and_optab, temp, GEN_INT (d - 1),
+ NULL_RTX, 0, OPTAB_LIB_WIDEN);
+ else
+ temp = expand_shift (RSHIFT_EXPR, mode, temp,
+ build_int_cst (NULL_TREE, ushift, 0),
+ NULL_RTX, 1);
+ temp = expand_binop (mode, add_optab, temp, op0, NULL_RTX,
+ 0, OPTAB_LIB_WIDEN);
+ return expand_shift (RSHIFT_EXPR, mode, temp, shift, NULL_RTX, 0);
+ }
+
+ label = gen_label_rtx ();
+ temp = copy_to_mode_reg (mode, op0);
+ do_cmp_and_jump (temp, const0_rtx, GE, mode, label);
+ expand_inc (temp, GEN_INT (d - 1));
+ emit_label (label);
+ return expand_shift (RSHIFT_EXPR, mode, temp, shift, NULL_RTX, 0);
+}
\f
/* Emit the code to divide OP0 by OP1, putting the result in TARGET
if that is convenient, and returning where the result is.
/* Don't clobber an operand while doing a multi-step calculation. */
|| ((rem_flag || op1_is_constant)
&& (reg_mentioned_p (target, op0)
- || (GET_CODE (op0) == MEM && GET_CODE (target) == MEM)))
+ || (MEM_P (op0) && MEM_P (target))))
|| reg_mentioned_p (target, op1)
- || (GET_CODE (op1) == MEM && GET_CODE (target) == MEM)))
+ || (MEM_P (op1) && MEM_P (target))))
target = 0;
/* Get the mode in which to perform this computation. Normally it will
/* If one of the operands is a volatile MEM, copy it into a register. */
- if (GET_CODE (op0) == MEM && MEM_VOLATILE_P (op0))
+ if (MEM_P (op0) && MEM_VOLATILE_P (op0))
op0 = force_reg (compute_mode, op0);
- if (GET_CODE (op1) == MEM && MEM_VOLATILE_P (op1))
+ if (MEM_P (op1) && MEM_VOLATILE_P (op1))
op1 = force_reg (compute_mode, op1);
/* If we need the remainder or if OP1 is constant, we need to
return gen_lowpart (mode, remainder);
}
quotient = expand_shift (RSHIFT_EXPR, compute_mode, op0,
- build_int_2 (pre_shift, 0),
+ build_int_cst (NULL_TREE,
+ pre_shift, 0),
tquotient, 1);
}
else if (size <= HOST_BITS_PER_WIDE_INT)
if (post_shift - 1 >= BITS_PER_WORD)
goto fail1;
- extra_cost = (shift_cost[post_shift - 1]
- + shift_cost[1]
- + 2 * add_cost[compute_mode]);
+ extra_cost
+ = (shift_cost[compute_mode][post_shift - 1]
+ + shift_cost[compute_mode][1]
+ + 2 * add_cost[compute_mode]);
t1 = expand_mult_highpart (compute_mode, op0, ml,
NULL_RTX, 1,
max_cost - extra_cost);
t2 = force_operand (gen_rtx_MINUS (compute_mode,
op0, t1),
NULL_RTX);
- t3 = expand_shift (RSHIFT_EXPR, compute_mode, t2,
- build_int_2 (1, 0), NULL_RTX,1);
+ t3 = expand_shift
+ (RSHIFT_EXPR, compute_mode, t2,
+ build_int_cst (NULL_TREE, 1, 0),
+ NULL_RTX,1);
t4 = force_operand (gen_rtx_PLUS (compute_mode,
t1, t3),
NULL_RTX);
- quotient
- = expand_shift (RSHIFT_EXPR, compute_mode, t4,
- build_int_2 (post_shift - 1, 0),
- tquotient, 1);
+ quotient = expand_shift
+ (RSHIFT_EXPR, compute_mode, t4,
+ build_int_cst (NULL_TREE,
+ post_shift - 1, 0),
+ tquotient, 1);
}
else
{
|| post_shift >= BITS_PER_WORD)
goto fail1;
- t1 = expand_shift (RSHIFT_EXPR, compute_mode, op0,
- build_int_2 (pre_shift, 0),
- NULL_RTX, 1);
- extra_cost = (shift_cost[pre_shift]
- + shift_cost[post_shift]);
+ t1 = expand_shift
+ (RSHIFT_EXPR, compute_mode, op0,
+ build_int_cst (NULL_TREE, pre_shift, 0),
+ NULL_RTX, 1);
+ extra_cost
+ = (shift_cost[compute_mode][pre_shift]
+ + shift_cost[compute_mode][post_shift]);
t2 = expand_mult_highpart (compute_mode, t1, ml,
NULL_RTX, 1,
max_cost - extra_cost);
if (t2 == 0)
goto fail1;
- quotient
- = expand_shift (RSHIFT_EXPR, compute_mode, t2,
- build_int_2 (post_shift, 0),
- tquotient, 1);
+ quotient = expand_shift
+ (RSHIFT_EXPR, compute_mode, t2,
+ build_int_cst (NULL_TREE,
+ post_shift, 0),
+ tquotient, 1);
}
}
}
else if (EXACT_POWER_OF_2_OR_ZERO_P (d)
&& (rem_flag ? smod_pow2_cheap[compute_mode]
: sdiv_pow2_cheap[compute_mode])
- /* ??? The cheap metric is computed only for
- word_mode. If this operation is wider, this may
- not be so. Assume true if the optab has an
- expander for this mode. */
+ /* We assume that cheap metric is true if the
+ optab has an expander for this mode. */
&& (((rem_flag ? smod_optab : sdiv_optab)
->handlers[compute_mode].insn_code
!= CODE_FOR_nothing)
;
else if (EXACT_POWER_OF_2_OR_ZERO_P (abs_d))
{
- lgup = floor_log2 (abs_d);
- if (BRANCH_COST < 1 || (abs_d != 2 && BRANCH_COST < 3))
- {
- rtx label = gen_label_rtx ();
- rtx t1;
-
- t1 = copy_to_mode_reg (compute_mode, op0);
- do_cmp_and_jump (t1, const0_rtx, GE,
- compute_mode, label);
- expand_inc (t1, gen_int_mode (abs_d - 1,
- compute_mode));
- emit_label (label);
- quotient = expand_shift (RSHIFT_EXPR, compute_mode, t1,
- build_int_2 (lgup, 0),
- tquotient, 0);
- }
- else
+ if (rem_flag)
{
- rtx t1, t2, t3;
- t1 = expand_shift (RSHIFT_EXPR, compute_mode, op0,
- build_int_2 (size - 1, 0),
- NULL_RTX, 0);
- t2 = expand_shift (RSHIFT_EXPR, compute_mode, t1,
- build_int_2 (size - lgup, 0),
- NULL_RTX, 1);
- t3 = force_operand (gen_rtx_PLUS (compute_mode,
- op0, t2),
- NULL_RTX);
- quotient = expand_shift (RSHIFT_EXPR, compute_mode, t3,
- build_int_2 (lgup, 0),
- tquotient, 0);
+ remainder = expand_smod_pow2 (compute_mode, op0, d);
+ if (remainder)
+ return gen_lowpart (mode, remainder);
}
+ quotient = expand_sdiv_pow2 (compute_mode, op0, abs_d);
- /* We have computed OP0 / abs(OP1). If OP1 is negative, negate
- the quotient. */
+ /* We have computed OP0 / abs(OP1). If OP1 is negative,
+ negate the quotient. */
if (d < 0)
{
insn = get_last_insn ();
|| size - 1 >= BITS_PER_WORD)
goto fail1;
- extra_cost = (shift_cost[post_shift]
- + shift_cost[size - 1]
+ extra_cost = (shift_cost[compute_mode][post_shift]
+ + shift_cost[compute_mode][size - 1]
+ add_cost[compute_mode]);
t1 = expand_mult_highpart (compute_mode, op0, ml,
NULL_RTX, 0,
max_cost - extra_cost);
if (t1 == 0)
goto fail1;
- t2 = expand_shift (RSHIFT_EXPR, compute_mode, t1,
- build_int_2 (post_shift, 0), NULL_RTX, 0);
- t3 = expand_shift (RSHIFT_EXPR, compute_mode, op0,
- build_int_2 (size - 1, 0), NULL_RTX, 0);
+ t2 = expand_shift
+ (RSHIFT_EXPR, compute_mode, t1,
+ build_int_cst (NULL_TREE, post_shift, 0),
+ NULL_RTX, 0);
+ t3 = expand_shift
+ (RSHIFT_EXPR, compute_mode, op0,
+ build_int_cst (NULL_TREE, size - 1, 0),
+ NULL_RTX, 0);
if (d < 0)
quotient
= force_operand (gen_rtx_MINUS (compute_mode,
goto fail1;
ml |= (~(unsigned HOST_WIDE_INT) 0) << (size - 1);
- extra_cost = (shift_cost[post_shift]
- + shift_cost[size - 1]
+ extra_cost = (shift_cost[compute_mode][post_shift]
+ + shift_cost[compute_mode][size - 1]
+ 2 * add_cost[compute_mode]);
t1 = expand_mult_highpart (compute_mode, op0, ml,
NULL_RTX, 0,
t2 = force_operand (gen_rtx_PLUS (compute_mode,
t1, op0),
NULL_RTX);
- t3 = expand_shift (RSHIFT_EXPR, compute_mode, t2,
- build_int_2 (post_shift, 0),
- NULL_RTX, 0);
- t4 = expand_shift (RSHIFT_EXPR, compute_mode, op0,
- build_int_2 (size - 1, 0),
- NULL_RTX, 0);
+ t3 = expand_shift
+ (RSHIFT_EXPR, compute_mode, t2,
+ build_int_cst (NULL_TREE, post_shift, 0),
+ NULL_RTX, 0);
+ t4 = expand_shift
+ (RSHIFT_EXPR, compute_mode, op0,
+ build_int_cst (NULL_TREE, size - 1, 0),
+ NULL_RTX, 0);
if (d < 0)
quotient
= force_operand (gen_rtx_MINUS (compute_mode,
if (remainder)
return gen_lowpart (mode, remainder);
}
- quotient = expand_shift (RSHIFT_EXPR, compute_mode, op0,
- build_int_2 (pre_shift, 0),
- tquotient, 0);
+ quotient = expand_shift
+ (RSHIFT_EXPR, compute_mode, op0,
+ build_int_cst (NULL_TREE, pre_shift, 0),
+ tquotient, 0);
}
else
{
if (post_shift < BITS_PER_WORD
&& size - 1 < BITS_PER_WORD)
{
- t1 = expand_shift (RSHIFT_EXPR, compute_mode, op0,
- build_int_2 (size - 1, 0),
- NULL_RTX, 0);
+ t1 = expand_shift
+ (RSHIFT_EXPR, compute_mode, op0,
+ build_int_cst (NULL_TREE, size - 1, 0),
+ NULL_RTX, 0);
t2 = expand_binop (compute_mode, xor_optab, op0, t1,
NULL_RTX, 0, OPTAB_WIDEN);
- extra_cost = (shift_cost[post_shift]
- + shift_cost[size - 1]
+ extra_cost = (shift_cost[compute_mode][post_shift]
+ + shift_cost[compute_mode][size - 1]
+ 2 * add_cost[compute_mode]);
t3 = expand_mult_highpart (compute_mode, t2, ml,
NULL_RTX, 1,
max_cost - extra_cost);
if (t3 != 0)
{
- t4 = expand_shift (RSHIFT_EXPR, compute_mode, t3,
- build_int_2 (post_shift, 0),
- NULL_RTX, 1);
+ t4 = expand_shift
+ (RSHIFT_EXPR, compute_mode, t3,
+ build_int_cst (NULL_TREE, post_shift, 0),
+ NULL_RTX, 1);
quotient = expand_binop (compute_mode, xor_optab,
t4, t1, tquotient, 0,
OPTAB_WIDEN);
op0, constm1_rtx), NULL_RTX);
t2 = expand_binop (compute_mode, ior_optab, op0, t1, NULL_RTX,
0, OPTAB_WIDEN);
- nsign = expand_shift (RSHIFT_EXPR, compute_mode, t2,
- build_int_2 (size - 1, 0), NULL_RTX, 0);
+ nsign = expand_shift
+ (RSHIFT_EXPR, compute_mode, t2,
+ build_int_cst (NULL_TREE, size - 1, 0),
+ NULL_RTX, 0);
t3 = force_operand (gen_rtx_MINUS (compute_mode, t1, nsign),
NULL_RTX);
t4 = expand_divmod (0, TRUNC_DIV_EXPR, compute_mode, t3, op1,
if (rem_flag)
{
remainder
- = GET_CODE (target) == REG ? target : gen_reg_rtx (compute_mode);
+ = REG_P (target) ? target : gen_reg_rtx (compute_mode);
quotient = gen_reg_rtx (compute_mode);
}
else
{
quotient
- = GET_CODE (target) == REG ? target : gen_reg_rtx (compute_mode);
+ = REG_P (target) ? target : gen_reg_rtx (compute_mode);
remainder = gen_reg_rtx (compute_mode);
}
rtx t1, t2, t3;
unsigned HOST_WIDE_INT d = INTVAL (op1);
t1 = expand_shift (RSHIFT_EXPR, compute_mode, op0,
- build_int_2 (floor_log2 (d), 0),
+ build_int_cst (NULL_TREE,
+ floor_log2 (d), 0),
tquotient, 1);
t2 = expand_binop (compute_mode, and_optab, op0,
GEN_INT (d - 1),
if (rem_flag)
{
- remainder = (GET_CODE (target) == REG
+ remainder = (REG_P (target)
? target : gen_reg_rtx (compute_mode));
quotient = gen_reg_rtx (compute_mode);
}
else
{
- quotient = (GET_CODE (target) == REG
+ quotient = (REG_P (target)
? target : gen_reg_rtx (compute_mode));
remainder = gen_reg_rtx (compute_mode);
}
rtx t1, t2, t3;
unsigned HOST_WIDE_INT d = INTVAL (op1);
t1 = expand_shift (RSHIFT_EXPR, compute_mode, op0,
- build_int_2 (floor_log2 (d), 0),
+ build_int_cst (NULL_TREE,
+ floor_log2 (d), 0),
tquotient, 0);
t2 = expand_binop (compute_mode, and_optab, op0,
GEN_INT (d - 1),
target = gen_reg_rtx (compute_mode);
if (rem_flag)
{
- remainder= (GET_CODE (target) == REG
+ remainder= (REG_P (target)
? target : gen_reg_rtx (compute_mode));
quotient = gen_reg_rtx (compute_mode);
}
else
{
- quotient = (GET_CODE (target) == REG
+ quotient = (REG_P (target)
? target : gen_reg_rtx (compute_mode));
remainder = gen_reg_rtx (compute_mode);
}
pre_shift = floor_log2 (d & -d);
ml = invert_mod2n (d >> pre_shift, size);
t1 = expand_shift (RSHIFT_EXPR, compute_mode, op0,
- build_int_2 (pre_shift, 0), NULL_RTX, unsignedp);
+ build_int_cst (NULL_TREE, pre_shift, 0),
+ NULL_RTX, unsignedp);
quotient = expand_mult (compute_mode, t1,
gen_int_mode (ml, compute_mode),
NULL_RTX, 1);
}
tem = plus_constant (op1, -1);
tem = expand_shift (RSHIFT_EXPR, compute_mode, tem,
- build_int_2 (1, 0), NULL_RTX, 1);
+ build_int_cst (NULL_TREE, 1, 0),
+ NULL_RTX, 1);
do_cmp_and_jump (remainder, tem, LEU, compute_mode, label);
expand_inc (quotient, const1_rtx);
expand_dec (remainder, op1);
abs_rem = expand_abs (compute_mode, remainder, NULL_RTX, 1, 0);
abs_op1 = expand_abs (compute_mode, op1, NULL_RTX, 1, 0);
tem = expand_shift (LSHIFT_EXPR, compute_mode, abs_rem,
- build_int_2 (1, 0), NULL_RTX, 1);
+ build_int_cst (NULL_TREE, 1, 0),
+ NULL_RTX, 1);
do_cmp_and_jump (tem, abs_op1, LTU, compute_mode, label);
tem = expand_binop (compute_mode, xor_optab, op0, op1,
NULL_RTX, 0, OPTAB_WIDEN);
mask = expand_shift (RSHIFT_EXPR, compute_mode, tem,
- build_int_2 (size - 1, 0), NULL_RTX, 0);
+ build_int_cst (NULL_TREE, size - 1, 0),
+ NULL_RTX, 0);
tem = expand_binop (compute_mode, xor_optab, mask, const1_rtx,
NULL_RTX, 0, OPTAB_WIDEN);
tem = expand_binop (compute_mode, sub_optab, tem, mask,
target = 0;
if (quotient == 0)
- /* No divide instruction either. Use library for remainder. */
- remainder = sign_expand_binop (compute_mode, umod_optab, smod_optab,
- op0, op1, target,
- unsignedp, OPTAB_LIB_WIDEN);
+ {
+ /* No divide instruction either. Use library for remainder. */
+ remainder = sign_expand_binop (compute_mode, umod_optab, smod_optab,
+ op0, op1, target,
+ unsignedp, OPTAB_LIB_WIDEN);
+ /* No remainder function. Try a quotient-and-remainder
+ function, keeping the remainder. */
+ if (!remainder)
+ {
+ remainder = gen_reg_rtx (compute_mode);
+ if (!expand_twoval_binop_libfunc
+ (unsignedp ? udivmod_optab : sdivmod_optab,
+ op0, op1,
+ NULL_RTX, remainder,
+ unsignedp ? UMOD : MOD))
+ remainder = NULL_RTX;
+ }
+ }
else
{
/* We divided. Now finish doing X - Y * (X / Y). */
}
\f
/* Return a tree node with data type TYPE, describing the value of X.
- Usually this is an RTL_EXPR, if there is no obvious better choice.
+ Usually this is an VAR_DECL, if there is no obvious better choice.
X may be an expression, however we only support those expressions
generated by loop.c. */
switch (GET_CODE (x))
{
case CONST_INT:
- t = build_int_2 (INTVAL (x),
- (TYPE_UNSIGNED (type)
- && (GET_MODE_BITSIZE (TYPE_MODE (type))
- < HOST_BITS_PER_WIDE_INT))
- || INTVAL (x) >= 0 ? 0 : -1);
- TREE_TYPE (t) = type;
- return t;
-
+ {
+ HOST_WIDE_INT hi = 0;
+
+ if (INTVAL (x) < 0
+ && !(TYPE_UNSIGNED (type)
+ && (GET_MODE_BITSIZE (TYPE_MODE (type))
+ < HOST_BITS_PER_WIDE_INT)))
+ hi = -1;
+
+ t = build_int_cst (type, INTVAL (x), hi);
+
+ return t;
+ }
+
case CONST_DOUBLE:
if (GET_MODE (x) == VOIDmode)
- {
- t = build_int_2 (CONST_DOUBLE_LOW (x), CONST_DOUBLE_HIGH (x));
- TREE_TYPE (t) = type;
- }
+ t = build_int_cst (type, CONST_DOUBLE_LOW (x), CONST_DOUBLE_HIGH (x));
else
{
REAL_VALUE_TYPE d;
}
case PLUS:
- return fold (build (PLUS_EXPR, type, make_tree (type, XEXP (x, 0)),
- make_tree (type, XEXP (x, 1))));
+ return fold (build2 (PLUS_EXPR, type, make_tree (type, XEXP (x, 0)),
+ make_tree (type, XEXP (x, 1))));
case MINUS:
- return fold (build (MINUS_EXPR, type, make_tree (type, XEXP (x, 0)),
- make_tree (type, XEXP (x, 1))));
+ return fold (build2 (MINUS_EXPR, type, make_tree (type, XEXP (x, 0)),
+ make_tree (type, XEXP (x, 1))));
case NEG:
return fold (build1 (NEGATE_EXPR, type, make_tree (type, XEXP (x, 0))));
case MULT:
- return fold (build (MULT_EXPR, type, make_tree (type, XEXP (x, 0)),
- make_tree (type, XEXP (x, 1))));
+ return fold (build2 (MULT_EXPR, type, make_tree (type, XEXP (x, 0)),
+ make_tree (type, XEXP (x, 1))));
case ASHIFT:
- return fold (build (LSHIFT_EXPR, type, make_tree (type, XEXP (x, 0)),
- make_tree (type, XEXP (x, 1))));
+ return fold (build2 (LSHIFT_EXPR, type, make_tree (type, XEXP (x, 0)),
+ make_tree (type, XEXP (x, 1))));
case LSHIFTRT:
t = lang_hooks.types.unsigned_type (type);
return fold (convert (type,
- build (RSHIFT_EXPR, t,
- make_tree (t, XEXP (x, 0)),
- make_tree (type, XEXP (x, 1)))));
+ build2 (RSHIFT_EXPR, t,
+ make_tree (t, XEXP (x, 0)),
+ make_tree (type, XEXP (x, 1)))));
case ASHIFTRT:
t = lang_hooks.types.signed_type (type);
return fold (convert (type,
- build (RSHIFT_EXPR, t,
- make_tree (t, XEXP (x, 0)),
- make_tree (type, XEXP (x, 1)))));
+ build2 (RSHIFT_EXPR, t,
+ make_tree (t, XEXP (x, 0)),
+ make_tree (type, XEXP (x, 1)))));
case DIV:
if (TREE_CODE (type) != REAL_TYPE)
t = type;
return fold (convert (type,
- build (TRUNC_DIV_EXPR, t,
- make_tree (t, XEXP (x, 0)),
- make_tree (t, XEXP (x, 1)))));
+ build2 (TRUNC_DIV_EXPR, t,
+ make_tree (t, XEXP (x, 0)),
+ make_tree (t, XEXP (x, 1)))));
case UDIV:
t = lang_hooks.types.unsigned_type (type);
return fold (convert (type,
- build (TRUNC_DIV_EXPR, t,
- make_tree (t, XEXP (x, 0)),
- make_tree (t, XEXP (x, 1)))));
+ build2 (TRUNC_DIV_EXPR, t,
+ make_tree (t, XEXP (x, 0)),
+ make_tree (t, XEXP (x, 1)))));
case SIGN_EXTEND:
case ZERO_EXTEND:
GET_CODE (x) == ZERO_EXTEND);
return fold (convert (type, make_tree (t, XEXP (x, 0))));
- default:
- t = make_node (RTL_EXPR);
- TREE_TYPE (t) = type;
+ default:
+ t = build_decl (VAR_DECL, NULL_TREE, type);
/* If TYPE is a POINTER_TYPE, X might be Pmode with TYPE_MODE being
ptr_mode. So convert. */
if (POINTER_TYPE_P (type))
x = convert_memory_address (TYPE_MODE (type), x);
- RTL_EXPR_RTL (t) = x;
- /* There are no insns to be output
- when this rtl_expr is used. */
- RTL_EXPR_SEQUENCE (t) = 0;
+ /* Note that we do *not* use SET_DECL_RTL here, because we do not
+ want set_decl_rtl to go adjusting REG_ATTRS for this temporary. */
+ t->decl.rtl = x;
+
return t;
}
}
add_type = (GET_MODE (add) == VOIDmode ? mult_type
: lang_hooks.types.type_for_mode (GET_MODE (add), unsignedp));
- result = fold (build (PLUS_EXPR, mult_type,
- fold (build (MULT_EXPR, mult_type,
- make_tree (mult_type, x),
- make_tree (mult_type, mult))),
- make_tree (add_type, add)));
+ result = fold (build2 (PLUS_EXPR, mult_type,
+ fold (build2 (MULT_EXPR, mult_type,
+ make_tree (mult_type, x),
+ make_tree (mult_type, mult))),
+ make_tree (add_type, add)));
return TREE_CONSTANT_OVERFLOW (result);
}
tree add_type = (GET_MODE (add) == VOIDmode
? type: lang_hooks.types.type_for_mode (GET_MODE (add),
unsignedp));
- tree result = fold (build (PLUS_EXPR, type,
- fold (build (MULT_EXPR, type,
- make_tree (type, x),
- make_tree (type, mult))),
- make_tree (add_type, add)));
+ tree result = fold (build2 (PLUS_EXPR, type,
+ fold (build2 (MULT_EXPR, type,
+ make_tree (type, x),
+ make_tree (type, mult))),
+ make_tree (add_type, add)));
return expand_expr (result, target, VOIDmode, 0);
}
rtx last = get_last_insn ();
rtx pattern, comparison;
- /* ??? Ok to do this and then fail? */
- op0 = protect_from_queue (op0, 0);
- op1 = protect_from_queue (op1, 0);
-
if (unsignedp)
code = unsigned_condition (code);
break;
}
- /* If we are comparing a double-word integer with zero, we can convert
- the comparison into one involving a single word. */
+ /* If we are comparing a double-word integer with zero or -1, we can
+ convert the comparison into one involving a single word. */
if (GET_MODE_BITSIZE (mode) == BITS_PER_WORD * 2
&& GET_MODE_CLASS (mode) == MODE_INT
- && op1 == const0_rtx
- && (GET_CODE (op0) != MEM || ! MEM_VOLATILE_P (op0)))
+ && (!MEM_P (op0) || ! MEM_VOLATILE_P (op0)))
{
- if (code == EQ || code == NE)
+ if ((code == EQ || code == NE)
+ && (op1 == const0_rtx || op1 == constm1_rtx))
{
rtx op00, op01, op0both;
- /* Do a logical OR of the two words and compare the result. */
+ /* Do a logical OR or AND of the two words and compare the result. */
op00 = simplify_gen_subreg (word_mode, op0, mode, 0);
op01 = simplify_gen_subreg (word_mode, op0, mode, UNITS_PER_WORD);
- op0both = expand_binop (word_mode, ior_optab, op00, op01,
- NULL_RTX, unsignedp, OPTAB_DIRECT);
+ op0both = expand_binop (word_mode,
+ op1 == const0_rtx ? ior_optab : and_optab,
+ op00, op01, NULL_RTX, unsignedp, OPTAB_DIRECT);
+
if (op0both != 0)
return emit_store_flag (target, code, op0both, op1, word_mode,
unsignedp, normalizep);
}
- else if (code == LT || code == GE)
+ else if ((code == LT || code == GE) && op1 == const0_rtx)
{
rtx op0h;
first. */
if (GET_MODE_SIZE (target_mode) > GET_MODE_SIZE (mode))
{
- op0 = protect_from_queue (op0, 0);
op0 = convert_modes (target_mode, mode, op0, 0);
mode = target_mode;
}
insn_operand_predicate_fn pred;
/* We think we may be able to do this with a scc insn. Emit the
- comparison and then the scc insn.
-
- compare_from_rtx may call emit_queue, which would be deleted below
- if the scc insn fails. So call it ourselves before setting LAST.
- Likewise for do_pending_stack_adjust. */
+ comparison and then the scc insn. */
- emit_queue ();
do_pending_stack_adjust ();
last = get_last_insn ();
compare_mode = insn_data[(int) icode].operand[0].mode;
subtarget = target;
pred = insn_data[(int) icode].operand[0].predicate;
- if (preserve_subexpressions_p ()
- || ! (*pred) (subtarget, compare_mode))
+ if (optimize || ! (*pred) (subtarget, compare_mode))
subtarget = gen_reg_rtx (compare_mode);
pattern = GEN_FCN (icode) (subtarget);
/* If we want to keep subexpressions around, don't reuse our
last target. */
- if (preserve_subexpressions_p ())
+ if (optimize)
subtarget = 0;
/* Now normalize to the proper value in COMPARE_MODE. Sometimes
delete_insns_since (last);
- /* If expensive optimizations, use different pseudo registers for each
- insn, instead of reusing the same pseudo. This leads to better CSE,
- but slows down the compiler, since there are more pseudos */
- subtarget = (!flag_expensive_optimizations
+ /* If optimizing, use different pseudo registers for each insn, instead
+ of reusing the same pseudo. This leads to better CSE, but slows
+ down the compiler, since there are more pseudos */
+ subtarget = (!optimize
&& (target_mode == mode)) ? target : NULL_RTX;
/* If we reached here, we can't do this with a scc insn. However, there
tem = expand_unop (mode, ffs_optab, op0, subtarget, 1);
else if (GET_MODE_SIZE (mode) < UNITS_PER_WORD)
{
- op0 = protect_from_queue (op0, 0);
tem = convert_modes (word_mode, mode, op0, 1);
mode = word_mode;
}
/* If this failed, we have to do this with set/compare/jump/set code. */
- if (GET_CODE (target) != REG
+ if (!REG_P (target)
|| reg_mentioned_p (target, op0) || reg_mentioned_p (target, op1))
target = gen_reg_rtx (GET_MODE (target));