/* Medium-level subroutines: convert bit-field store and extract
and shifts, multiplies and divides to rtl instructions.
Copyright (C) 1987, 1988, 1989, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
- 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
+ 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
This file is part of GCC.
#include "config.h"
#include "system.h"
+#include "coretypes.h"
+#include "tm.h"
#include "toplev.h"
#include "rtl.h"
#include "tree.h"
#include "optabs.h"
#include "real.h"
#include "recog.h"
-
-static void store_fixed_bit_field PARAMS ((rtx, unsigned HOST_WIDE_INT,
- unsigned HOST_WIDE_INT,
- unsigned HOST_WIDE_INT, rtx));
-static void store_split_bit_field PARAMS ((rtx, unsigned HOST_WIDE_INT,
- unsigned HOST_WIDE_INT, rtx));
-static rtx extract_fixed_bit_field PARAMS ((enum machine_mode, rtx,
- unsigned HOST_WIDE_INT,
- unsigned HOST_WIDE_INT,
- unsigned HOST_WIDE_INT,
- rtx, int));
-static rtx mask_rtx PARAMS ((enum machine_mode, int,
- int, int));
-static rtx lshift_value PARAMS ((enum machine_mode, rtx,
- int, int));
-static rtx extract_split_bit_field PARAMS ((rtx, unsigned HOST_WIDE_INT,
- unsigned HOST_WIDE_INT, int));
-static void do_cmp_and_jump PARAMS ((rtx, rtx, enum rtx_code,
- enum machine_mode, rtx));
-
-/* Non-zero means divides or modulus operations are relatively cheap for
- powers of two, so don't use branches; emit the operation instead.
+#include "langhooks.h"
+
+static void store_fixed_bit_field (rtx, unsigned HOST_WIDE_INT,
+ unsigned HOST_WIDE_INT,
+ unsigned HOST_WIDE_INT, rtx);
+static void store_split_bit_field (rtx, unsigned HOST_WIDE_INT,
+ unsigned HOST_WIDE_INT, rtx);
+static rtx extract_fixed_bit_field (enum machine_mode, rtx,
+ unsigned HOST_WIDE_INT,
+ unsigned HOST_WIDE_INT,
+ unsigned HOST_WIDE_INT, rtx, int);
+static rtx mask_rtx (enum machine_mode, int, int, int);
+static rtx lshift_value (enum machine_mode, rtx, int, int);
+static rtx extract_split_bit_field (rtx, unsigned HOST_WIDE_INT,
+ unsigned HOST_WIDE_INT, int);
+static void do_cmp_and_jump (rtx, rtx, enum rtx_code, enum machine_mode, rtx);
+
+/* Nonzero means divides or modulus operations are relatively cheap for
+ powers of two, so don't use branches; emit the operation instead.
Usually, this will mean that the MD file will emit non-branch
sequences. */
-static int sdiv_pow2_cheap, smod_pow2_cheap;
+static int sdiv_pow2_cheap[NUM_MACHINE_MODES];
+static int smod_pow2_cheap[NUM_MACHINE_MODES];
#ifndef SLOW_UNALIGNED_ACCESS
#define SLOW_UNALIGNED_ACCESS(MODE, ALIGN) STRICT_ALIGNMENT
/* Cost of various pieces of RTL. Note that some of these are indexed by
shift count and some by mode. */
-static int add_cost, negate_cost, zero_cost;
-static int shift_cost[MAX_BITS_PER_WORD];
-static int shiftadd_cost[MAX_BITS_PER_WORD];
-static int shiftsub_cost[MAX_BITS_PER_WORD];
+static int zero_cost;
+static int add_cost[NUM_MACHINE_MODES];
+static int neg_cost[NUM_MACHINE_MODES];
+static int shift_cost[NUM_MACHINE_MODES][MAX_BITS_PER_WORD];
+static int shiftadd_cost[NUM_MACHINE_MODES][MAX_BITS_PER_WORD];
+static int shiftsub_cost[NUM_MACHINE_MODES][MAX_BITS_PER_WORD];
static int mul_cost[NUM_MACHINE_MODES];
static int div_cost[NUM_MACHINE_MODES];
static int mul_widen_cost[NUM_MACHINE_MODES];
static int mul_highpart_cost[NUM_MACHINE_MODES];
void
-init_expmed ()
+init_expmed (void)
{
- /* This is "some random pseudo register" for purposes of calling recog
- to see what insns exist. */
- rtx reg = gen_rtx_REG (word_mode, 10000);
- rtx shift_insn, shiftadd_insn, shiftsub_insn;
+ rtx reg, shift_insn, shiftadd_insn, shiftsub_insn;
+ rtx shift_pat, shiftadd_pat, shiftsub_pat;
+ rtx pow2[MAX_BITS_PER_WORD];
+ rtx cint[MAX_BITS_PER_WORD];
int dummy;
- int m;
+ int m, n;
enum machine_mode mode, wider_mode;
start_sequence ();
- reg = gen_rtx_REG (word_mode, 10000);
-
zero_cost = rtx_cost (const0_rtx, 0);
- add_cost = rtx_cost (gen_rtx_PLUS (word_mode, reg, reg), SET);
-
- shift_insn = emit_insn (gen_rtx_SET (VOIDmode, reg,
- gen_rtx_ASHIFT (word_mode, reg,
- const0_rtx)));
-
- shiftadd_insn
- = emit_insn (gen_rtx_SET (VOIDmode, reg,
- gen_rtx_PLUS (word_mode,
- gen_rtx_MULT (word_mode,
- reg, const0_rtx),
- reg)));
-
- shiftsub_insn
- = emit_insn (gen_rtx_SET (VOIDmode, reg,
- gen_rtx_MINUS (word_mode,
- gen_rtx_MULT (word_mode,
- reg, const0_rtx),
- reg)));
init_recog ();
- shift_cost[0] = 0;
- shiftadd_cost[0] = shiftsub_cost[0] = add_cost;
-
for (m = 1; m < MAX_BITS_PER_WORD; m++)
{
- shift_cost[m] = shiftadd_cost[m] = shiftsub_cost[m] = 32000;
-
- XEXP (SET_SRC (PATTERN (shift_insn)), 1) = GEN_INT (m);
- if (recog (PATTERN (shift_insn), shift_insn, &dummy) >= 0)
- shift_cost[m] = rtx_cost (SET_SRC (PATTERN (shift_insn)), SET);
-
- XEXP (XEXP (SET_SRC (PATTERN (shiftadd_insn)), 0), 1)
- = GEN_INT ((HOST_WIDE_INT) 1 << m);
- if (recog (PATTERN (shiftadd_insn), shiftadd_insn, &dummy) >= 0)
- shiftadd_cost[m] = rtx_cost (SET_SRC (PATTERN (shiftadd_insn)), SET);
-
- XEXP (XEXP (SET_SRC (PATTERN (shiftsub_insn)), 0), 1)
- = GEN_INT ((HOST_WIDE_INT) 1 << m);
- if (recog (PATTERN (shiftsub_insn), shiftsub_insn, &dummy) >= 0)
- shiftsub_cost[m] = rtx_cost (SET_SRC (PATTERN (shiftsub_insn)), SET);
+ pow2[m] = GEN_INT ((HOST_WIDE_INT) 1 << m);
+ cint[m] = GEN_INT (m);
}
- negate_cost = rtx_cost (gen_rtx_NEG (word_mode, reg), SET);
-
- sdiv_pow2_cheap
- = (rtx_cost (gen_rtx_DIV (word_mode, reg, GEN_INT (32)), SET)
- <= 2 * add_cost);
- smod_pow2_cheap
- = (rtx_cost (gen_rtx_MOD (word_mode, reg, GEN_INT (32)), SET)
- <= 2 * add_cost);
-
for (mode = GET_CLASS_NARROWEST_MODE (MODE_INT);
mode != VOIDmode;
mode = GET_MODE_WIDER_MODE (mode))
{
reg = gen_rtx_REG (mode, 10000);
- div_cost[(int) mode] = rtx_cost (gen_rtx_UDIV (mode, reg, reg), SET);
- mul_cost[(int) mode] = rtx_cost (gen_rtx_MULT (mode, reg, reg), SET);
+ add_cost[mode] = rtx_cost (gen_rtx_PLUS (mode, reg, reg), SET);
+ neg_cost[mode] = rtx_cost (gen_rtx_NEG (mode, reg), SET);
+ div_cost[mode] = rtx_cost (gen_rtx_UDIV (mode, reg, reg), SET);
+ mul_cost[mode] = rtx_cost (gen_rtx_MULT (mode, reg, reg), SET);
+
+ sdiv_pow2_cheap[mode]
+ = (rtx_cost (gen_rtx_DIV (mode, reg, GEN_INT (32)), SET)
+ <= 2 * add_cost[mode]);
+ smod_pow2_cheap[mode]
+ = (rtx_cost (gen_rtx_MOD (mode, reg, GEN_INT (32)), SET)
+ <= 2 * add_cost[mode]);
+
wider_mode = GET_MODE_WIDER_MODE (mode);
if (wider_mode != VOIDmode)
{
- mul_widen_cost[(int) wider_mode]
+ mul_widen_cost[wider_mode]
= rtx_cost (gen_rtx_MULT (wider_mode,
gen_rtx_ZERO_EXTEND (wider_mode, reg),
gen_rtx_ZERO_EXTEND (wider_mode, reg)),
SET);
- mul_highpart_cost[(int) mode]
+ mul_highpart_cost[mode]
= rtx_cost (gen_rtx_TRUNCATE
(mode,
gen_rtx_LSHIFTRT (wider_mode,
GEN_INT (GET_MODE_BITSIZE (mode)))),
SET);
}
+
+ shift_insn = emit_insn (gen_rtx_SET (VOIDmode, reg,
+ gen_rtx_ASHIFT (mode, reg,
+ const0_rtx)));
+
+ shiftadd_insn
+ = emit_insn (gen_rtx_SET (VOIDmode, reg,
+ gen_rtx_PLUS (mode,
+ gen_rtx_MULT (mode,
+ reg,
+ const0_rtx),
+ reg)));
+
+ shiftsub_insn
+ = emit_insn (gen_rtx_SET (VOIDmode, reg,
+ gen_rtx_MINUS (mode,
+ gen_rtx_MULT (mode,
+ reg,
+ const0_rtx),
+ reg)));
+
+ shift_pat = PATTERN (shift_insn);
+ shiftadd_pat = PATTERN (shiftadd_insn);
+ shiftsub_pat = PATTERN (shiftsub_insn);
+
+ shift_cost[mode][0] = 0;
+ shiftadd_cost[mode][0] = shiftsub_cost[mode][0] = add_cost[mode];
+
+ n = MIN (MAX_BITS_PER_WORD, GET_MODE_BITSIZE (mode));
+ for (m = 1; m < n; m++)
+ {
+ shift_cost[mode][m] = 32000;
+ XEXP (SET_SRC (shift_pat), 1) = cint[m];
+ if (recog (shift_pat, shift_insn, &dummy) >= 0)
+ shift_cost[mode][m] = rtx_cost (SET_SRC (shift_pat), SET);
+
+ shiftadd_cost[mode][m] = 32000;
+ XEXP (XEXP (SET_SRC (shiftadd_pat), 0), 1) = pow2[m];
+ if (recog (shiftadd_pat, shiftadd_insn, &dummy) >= 0)
+ shiftadd_cost[mode][m] = rtx_cost (SET_SRC (shiftadd_pat), SET);
+
+ shiftsub_cost[mode][m] = 32000;
+ XEXP (XEXP (SET_SRC (shiftsub_pat), 0), 1) = pow2[m];
+ if (recog (shiftsub_pat, shiftsub_insn, &dummy) >= 0)
+ shiftsub_cost[mode][m] = rtx_cost (SET_SRC (shiftsub_pat), SET);
+ }
}
end_sequence ();
useful if X is a CONST_INT. */
rtx
-negate_rtx (mode, x)
- enum machine_mode mode;
- rtx x;
+negate_rtx (enum machine_mode mode, rtx x)
{
rtx result = simplify_unary_operation (NEG, mode, x, mode);
is false; else the mode of the specified operand. If OPNO is -1,
all the caller cares about is whether the insn is available. */
enum machine_mode
-mode_for_extraction (pattern, opno)
- enum extraction_pattern pattern;
- int opno;
+mode_for_extraction (enum extraction_pattern pattern, int opno)
{
const struct insn_data *data;
else, we use the mode of operand 3. */
rtx
-store_bit_field (str_rtx, bitsize, bitnum, fieldmode, value, total_size)
- rtx str_rtx;
- unsigned HOST_WIDE_INT bitsize;
- unsigned HOST_WIDE_INT bitnum;
- enum machine_mode fieldmode;
- rtx value;
- HOST_WIDE_INT total_size;
+store_bit_field (rtx str_rtx, unsigned HOST_WIDE_INT bitsize,
+ unsigned HOST_WIDE_INT bitnum, enum machine_mode fieldmode,
+ rtx value, HOST_WIDE_INT total_size)
{
unsigned int unit
= (GET_CODE (str_rtx) == MEM) ? BITS_PER_UNIT : BITS_PER_WORD;
unsigned HOST_WIDE_INT offset = bitnum / unit;
unsigned HOST_WIDE_INT bitpos = bitnum % unit;
rtx op0 = str_rtx;
+ int byte_offset;
enum machine_mode op_mode = mode_for_extraction (EP_insv, 3);
value = protect_from_queue (value, 0);
+ /* Use vec_extract patterns for extracting parts of vectors whenever
+ available. */
+ if (VECTOR_MODE_P (GET_MODE (op0))
+ && GET_CODE (op0) != MEM
+ && (vec_set_optab->handlers[GET_MODE (op0)].insn_code
+ != CODE_FOR_nothing)
+ && fieldmode == GET_MODE_INNER (GET_MODE (op0))
+ && bitsize == GET_MODE_BITSIZE (GET_MODE_INNER (GET_MODE (op0)))
+ && !(bitnum % GET_MODE_BITSIZE (GET_MODE_INNER (GET_MODE (op0)))))
+ {
+ enum machine_mode outermode = GET_MODE (op0);
+ enum machine_mode innermode = GET_MODE_INNER (outermode);
+ int icode = (int) vec_set_optab->handlers[outermode].insn_code;
+ int pos = bitnum / GET_MODE_BITSIZE (innermode);
+ rtx rtxpos = GEN_INT (pos);
+ rtx src = value;
+ rtx dest = op0;
+ rtx pat, seq;
+ enum machine_mode mode0 = insn_data[icode].operand[0].mode;
+ enum machine_mode mode1 = insn_data[icode].operand[1].mode;
+ enum machine_mode mode2 = insn_data[icode].operand[2].mode;
+
+ start_sequence ();
+
+ if (! (*insn_data[icode].operand[1].predicate) (src, mode1))
+ src = copy_to_mode_reg (mode1, src);
+
+ if (! (*insn_data[icode].operand[2].predicate) (rtxpos, mode2))
+ rtxpos = copy_to_mode_reg (mode1, rtxpos);
+
+ /* We could handle this, but we should always be called with a pseudo
+ for our targets and all insns should take them as outputs. */
+ if (! (*insn_data[icode].operand[0].predicate) (dest, mode0)
+ || ! (*insn_data[icode].operand[1].predicate) (src, mode1)
+ || ! (*insn_data[icode].operand[2].predicate) (rtxpos, mode2))
+ abort ();
+ pat = GEN_FCN (icode) (dest, src, rtxpos);
+ seq = get_insns ();
+ end_sequence ();
+ if (pat)
+ {
+ emit_insn (seq);
+ emit_insn (pat);
+ return dest;
+ }
+ }
+
if (flag_force_mem)
- value = force_not_mem (value);
+ {
+ int old_generating_concat_p = generating_concat_p;
+ generating_concat_p = 0;
+ value = force_not_mem (value);
+ generating_concat_p = old_generating_concat_p;
+ }
/* If the target is a register, overwriting the entire object, or storing
a full-word or multi-word field can be done with just a SUBREG.
If the target is memory, storing any naturally aligned field can be
done with a simple store. For targets that support fast unaligned
memory, any naturally sized, unit aligned field can be done directly. */
-
+
+ byte_offset = (bitnum % BITS_PER_WORD) / BITS_PER_UNIT
+ + (offset * UNITS_PER_WORD);
+
if (bitpos == 0
&& bitsize == GET_MODE_BITSIZE (fieldmode)
&& (GET_CODE (op0) != MEM
- ? (GET_MODE_SIZE (fieldmode) >= UNITS_PER_WORD
+ ? ((GET_MODE_SIZE (fieldmode) >= UNITS_PER_WORD
|| GET_MODE_SIZE (GET_MODE (op0)) == GET_MODE_SIZE (fieldmode))
+ && byte_offset % GET_MODE_SIZE (fieldmode) == 0)
: (! SLOW_UNALIGNED_ACCESS (fieldmode, MEM_ALIGN (op0))
|| (offset * BITS_PER_UNIT % bitsize == 0
&& MEM_ALIGN (op0) % GET_MODE_BITSIZE (fieldmode) == 0))))
subregs results in Severe Tire Damage. */
abort ();
}
- if (GET_CODE (op0) == REG)
- op0 = gen_rtx_SUBREG (fieldmode, op0,
- (bitnum % BITS_PER_WORD) / BITS_PER_UNIT
- + (offset * UNITS_PER_WORD));
+ if (REG_P (op0))
+ op0 = gen_rtx_SUBREG (fieldmode, op0, byte_offset);
else
op0 = adjust_address (op0, fieldmode, offset);
}
}
}
+ /* We may be accessing data outside the field, which means
+ we can alias adjacent data. */
+ if (GET_CODE (op0) == MEM)
+ {
+ op0 = shallow_copy_rtx (op0);
+ set_mem_alias_set (op0, 0);
+ set_mem_expr (op0, 0);
+ }
+
/* If OP0 is a register, BITPOS must count within a word.
But as we have it, it counts within whatever size OP0 now has.
On a bigendian machine, these are not the same, so convert. */
if (GET_CODE (op0) != MEM
&& (BYTES_BIG_ENDIAN ? bitpos + bitsize == unit : bitpos == 0)
&& bitsize == GET_MODE_BITSIZE (fieldmode)
- && (movstrict_optab->handlers[(int) fieldmode].insn_code
+ && (movstrict_optab->handlers[fieldmode].insn_code
!= CODE_FOR_nothing))
{
- int icode = movstrict_optab->handlers[(int) fieldmode].insn_code;
+ int icode = movstrict_optab->handlers[fieldmode].insn_code;
/* Get appropriate low part of the value being stored. */
- if (GET_CODE (value) == CONST_INT || GET_CODE (value) == REG)
+ if (GET_CODE (value) == CONST_INT || REG_P (value))
value = gen_lowpart (fieldmode, value);
else if (!(GET_CODE (value) == SYMBOL_REF
|| GET_CODE (value) == LABEL_REF
VOIDmode, because that is what store_field uses to indicate that this
is a bit field, but passing VOIDmode to operand_subword_force will
result in an abort. */
- fieldmode = smallest_mode_for_size (nwords * BITS_PER_WORD, MODE_INT);
+ fieldmode = GET_MODE (value);
+ if (fieldmode == VOIDmode)
+ fieldmode = smallest_mode_for_size (nwords * BITS_PER_WORD, MODE_INT);
for (i = 0; i < nwords; i++)
{
store_bit_field (op0, MIN (BITS_PER_WORD,
bitsize - i * BITS_PER_WORD),
bitnum + bit_offset, word_mode,
- operand_subword_force (value, wordnum,
- (GET_MODE (value) == VOIDmode
- ? fieldmode
- : GET_MODE (value))),
+ operand_subword_force (value, wordnum, fieldmode),
total_size);
}
return value;
if (offset != 0
|| GET_MODE_SIZE (GET_MODE (op0)) > UNITS_PER_WORD)
{
- if (GET_CODE (op0) != REG)
+ if (!REG_P (op0))
{
/* Since this is a destination (lvalue), we can't copy it to a
pseudo. We can trivially remove a SUBREG that does not
corresponding size. This can occur on a machine with 64 bit registers
that uses SFmode for float. This can also occur for unaligned float
structure fields. */
- if (GET_MODE_CLASS (GET_MODE (value)) == MODE_FLOAT)
- {
- if (GET_CODE (value) != REG)
- value = copy_to_reg (value);
- value = gen_rtx_SUBREG (word_mode, value, 0);
- }
+ if (GET_MODE_CLASS (GET_MODE (value)) != MODE_INT
+ && GET_MODE_CLASS (GET_MODE (value)) != MODE_PARTIAL_INT)
+ value = gen_lowpart ((GET_MODE (value) == VOIDmode
+ ? word_mode : int_mode_for_mode (GET_MODE (value))),
+ value);
/* Now OFFSET is nonzero only if OP0 is memory
and is therefore always measured in bytes. */
&& !(bitsize == 1 && GET_CODE (value) == CONST_INT)
/* Ensure insv's size is wide enough for this field. */
&& (GET_MODE_BITSIZE (op_mode) >= bitsize)
- && ! ((GET_CODE (op0) == REG || GET_CODE (op0) == SUBREG)
+ && ! ((REG_P (op0) || GET_CODE (op0) == SUBREG)
&& (bitsize + bitpos > GET_MODE_BITSIZE (op_mode))))
{
int xbitpos = bitpos;
&& GET_MODE_BITSIZE (bestmode) > MEM_ALIGN (op0)))
goto insv_loses;
- /* Adjust address to point to the containing unit of that mode.
+ /* Adjust address to point to the containing unit of that mode.
Compute offset as multiple of this unit, counting in bytes. */
unit = GET_MODE_BITSIZE (bestmode);
offset = (bitnum / unit) * GET_MODE_SIZE (bestmode);
/* We can't just change the mode, because this might clobber op0,
and we will need the original value of op0 if insv fails. */
xop0 = gen_rtx_SUBREG (maxmode, SUBREG_REG (xop0), SUBREG_BYTE (xop0));
- if (GET_CODE (xop0) == REG && GET_MODE (xop0) != maxmode)
+ if (REG_P (xop0) && GET_MODE (xop0) != maxmode)
xop0 = gen_rtx_SUBREG (maxmode, xop0, 0);
/* On big-endian machines, we count bits from the most significant.
if we must narrow it, be sure we do it correctly. */
if (GET_MODE_SIZE (GET_MODE (value)) < GET_MODE_SIZE (maxmode))
- value1 = simplify_gen_subreg (maxmode, value1,
- GET_MODE (value1), 0);
+ {
+ rtx tmp;
+
+ tmp = simplify_subreg (maxmode, value1, GET_MODE (value), 0);
+ if (! tmp)
+ tmp = simplify_gen_subreg (maxmode,
+ force_reg (GET_MODE (value),
+ value1),
+ GET_MODE (value), 0);
+ value1 = tmp;
+ }
else
value1 = gen_lowpart (maxmode, value1);
}
else if (GET_CODE (value) == CONST_INT)
- value1 = GEN_INT (trunc_int_for_mode (INTVAL (value), maxmode));
+ value1 = gen_int_mode (INTVAL (value), maxmode);
else if (!CONSTANT_P (value))
/* Parse phase is supposed to make VALUE's data type
match that of the component reference, which is a type
if (pat)
emit_insn (pat);
else
- {
+ {
delete_insns_since (last);
store_fixed_bit_field (op0, offset, bitsize, bitpos, value);
}
Note that protect_from_queue has already been done on OP0 and VALUE. */
static void
-store_fixed_bit_field (op0, offset, bitsize, bitpos, value)
- rtx op0;
- unsigned HOST_WIDE_INT offset, bitsize, bitpos;
- rtx value;
+store_fixed_bit_field (rtx op0, unsigned HOST_WIDE_INT offset,
+ unsigned HOST_WIDE_INT bitsize,
+ unsigned HOST_WIDE_INT bitpos, rtx value)
{
enum machine_mode mode;
unsigned int total_bits = BITS_PER_WORD;
and a field split across two bytes.
Such cases are not supposed to be able to occur. */
- if (GET_CODE (op0) == REG || GET_CODE (op0) == SUBREG)
+ if (REG_P (op0) || GET_CODE (op0) == SUBREG)
{
if (offset != 0)
abort ();
{
/* Get the proper mode to use for this field. We want a mode that
includes the entire field. If such a mode would be larger than
- a word, we won't be doing the extraction the normal way.
+ a word, we won't be doing the extraction the normal way.
We don't want a mode bigger than the destination. */
mode = GET_MODE (op0);
if (GET_MODE_BITSIZE (mode) == 0
- || GET_MODE_BITSIZE (mode) > GET_MODE_BITSIZE (word_mode))
- mode = word_mode;
+ || GET_MODE_BITSIZE (mode) > GET_MODE_BITSIZE (word_mode))
+ mode = word_mode;
mode = get_best_mode (bitsize, bitpos + offset * BITS_PER_UNIT,
MEM_ALIGN (op0), mode, MEM_VOLATILE_P (op0));
if (GET_MODE (value) != mode)
{
- if ((GET_CODE (value) == REG || GET_CODE (value) == SUBREG)
+ if ((REG_P (value) || GET_CODE (value) == SUBREG)
&& GET_MODE_SIZE (mode) < GET_MODE_SIZE (GET_MODE (value)))
value = gen_lowpart (mode, value);
else
/* Now clear the chosen bits in OP0,
except that if VALUE is -1 we need not bother. */
- subtarget = (GET_CODE (op0) == REG || ! flag_force_mem) ? op0 : 0;
+ subtarget = (REG_P (op0) || ! flag_force_mem) ? op0 : 0;
if (! all_one)
{
This does not yet handle fields wider than BITS_PER_WORD. */
static void
-store_split_bit_field (op0, bitsize, bitpos, value)
- rtx op0;
- unsigned HOST_WIDE_INT bitsize, bitpos;
- rtx value;
+store_split_bit_field (rtx op0, unsigned HOST_WIDE_INT bitsize,
+ unsigned HOST_WIDE_INT bitpos, rtx value)
{
unsigned int unit;
unsigned int bitsdone = 0;
/* Make sure UNIT isn't larger than BITS_PER_WORD, we can only handle that
much at a time. */
- if (GET_CODE (op0) == REG || GET_CODE (op0) == SUBREG)
+ if (REG_P (op0) || GET_CODE (op0) == SUBREG)
unit = BITS_PER_WORD;
else
unit = MIN (MEM_ALIGN (op0), BITS_PER_WORD);
GET_MODE (SUBREG_REG (op0)));
offset = 0;
}
- else if (GET_CODE (op0) == REG)
+ else if (REG_P (op0))
{
word = operand_subword_force (op0, offset, GET_MODE (op0));
offset = 0;
if they are equally easy. */
rtx
-extract_bit_field (str_rtx, bitsize, bitnum, unsignedp,
- target, mode, tmode, total_size)
- rtx str_rtx;
- unsigned HOST_WIDE_INT bitsize;
- unsigned HOST_WIDE_INT bitnum;
- int unsignedp;
- rtx target;
- enum machine_mode mode, tmode;
- HOST_WIDE_INT total_size;
+extract_bit_field (rtx str_rtx, unsigned HOST_WIDE_INT bitsize,
+ unsigned HOST_WIDE_INT bitnum, int unsignedp, rtx target,
+ enum machine_mode mode, enum machine_mode tmode,
+ HOST_WIDE_INT total_size)
{
unsigned int unit
= (GET_CODE (str_rtx) == MEM) ? BITS_PER_UNIT : BITS_PER_WORD;
if (tmode == VOIDmode)
tmode = mode;
+
while (GET_CODE (op0) == SUBREG)
{
- int outer_size = GET_MODE_BITSIZE (GET_MODE (op0));
- int inner_size = GET_MODE_BITSIZE (GET_MODE (SUBREG_REG (op0)));
-
- offset += SUBREG_BYTE (op0) / UNITS_PER_WORD;
-
- inner_size = MIN (inner_size, BITS_PER_WORD);
-
- if (BYTES_BIG_ENDIAN && (outer_size < inner_size))
+ bitpos += SUBREG_BYTE (op0) * BITS_PER_UNIT;
+ if (bitpos > unit)
{
- bitpos += inner_size - outer_size;
- if (bitpos > unit)
- {
- offset += (bitpos / unit);
- bitpos %= unit;
- }
+ offset += (bitpos / unit);
+ bitpos %= unit;
}
-
op0 = SUBREG_REG (op0);
}
- if (GET_CODE (op0) == REG
+ if (REG_P (op0)
&& mode == GET_MODE (op0)
&& bitnum == 0
&& bitsize == GET_MODE_BITSIZE (GET_MODE (op0)))
return op0;
}
+ /* Use vec_extract patterns for extracting parts of vectors whenever
+ available. */
+ if (VECTOR_MODE_P (GET_MODE (op0))
+ && GET_CODE (op0) != MEM
+ && (vec_extract_optab->handlers[GET_MODE (op0)].insn_code
+ != CODE_FOR_nothing)
+ && ((bitsize + bitnum) / GET_MODE_BITSIZE (GET_MODE_INNER (GET_MODE (op0)))
+ == bitsize / GET_MODE_BITSIZE (GET_MODE_INNER (GET_MODE (op0)))))
+ {
+ enum machine_mode outermode = GET_MODE (op0);
+ enum machine_mode innermode = GET_MODE_INNER (outermode);
+ int icode = (int) vec_extract_optab->handlers[outermode].insn_code;
+ int pos = bitnum / GET_MODE_BITSIZE (innermode);
+ rtx rtxpos = GEN_INT (pos);
+ rtx src = op0;
+ rtx dest = NULL, pat, seq;
+ enum machine_mode mode0 = insn_data[icode].operand[0].mode;
+ enum machine_mode mode1 = insn_data[icode].operand[1].mode;
+ enum machine_mode mode2 = insn_data[icode].operand[2].mode;
+
+ if (innermode == tmode || innermode == mode)
+ dest = target;
+
+ if (!dest)
+ dest = gen_reg_rtx (innermode);
+
+ start_sequence ();
+
+ if (! (*insn_data[icode].operand[0].predicate) (dest, mode0))
+ dest = copy_to_mode_reg (mode0, dest);
+
+ if (! (*insn_data[icode].operand[1].predicate) (src, mode1))
+ src = copy_to_mode_reg (mode1, src);
+
+ if (! (*insn_data[icode].operand[2].predicate) (rtxpos, mode2))
+ rtxpos = copy_to_mode_reg (mode1, rtxpos);
+
+ /* We could handle this, but we should always be called with a pseudo
+ for our targets and all insns should take them as outputs. */
+ if (! (*insn_data[icode].operand[0].predicate) (dest, mode0)
+ || ! (*insn_data[icode].operand[1].predicate) (src, mode1)
+ || ! (*insn_data[icode].operand[2].predicate) (rtxpos, mode2))
+ abort ();
+
+ pat = GEN_FCN (icode) (dest, src, rtxpos);
+ seq = get_insns ();
+ end_sequence ();
+ if (pat)
+ {
+ emit_insn (seq);
+ emit_insn (pat);
+ return dest;
+ }
+ }
+
/* Make sure we are playing with integral modes. Pun with subregs
if we aren't. */
{
}
}
- /* ??? We currently assume TARGET is at least as big as BITSIZE.
- If that's wrong, the solution is to test for it and set TARGET to 0
- if needed. */
-
+ /* We may be accessing data outside the field, which means
+ we can alias adjacent data. */
+ if (GET_CODE (op0) == MEM)
+ {
+ op0 = shallow_copy_rtx (op0);
+ set_mem_alias_set (op0, 0);
+ set_mem_expr (op0, 0);
+ }
+
+ /* Extraction of a full-word or multi-word value from a structure
+ in a register or aligned memory can be done with just a SUBREG.
+ A subword value in the least significant part of a register
+ can also be extracted with a SUBREG. For this, we need the
+ byte offset of the value in op0. */
+
+ byte_offset = bitpos / BITS_PER_UNIT + offset * UNITS_PER_WORD;
+
/* If OP0 is a register, BITPOS must count within a word.
But as we have it, it counts within whatever size OP0 now has.
On a bigendian machine, these are not the same, so convert. */
&& unit > GET_MODE_BITSIZE (GET_MODE (op0)))
bitpos += unit - GET_MODE_BITSIZE (GET_MODE (op0));
- /* Extracting a full-word or multi-word value
- from a structure in a register or aligned memory.
- This can be done with just SUBREG.
- So too extracting a subword value in
- the least significant part of the register. */
-
- byte_offset = (bitnum % BITS_PER_WORD) / BITS_PER_UNIT
- + (offset * UNITS_PER_WORD);
+ /* ??? We currently assume TARGET is at least as big as BITSIZE.
+ If that's wrong, the solution is to test for it and set TARGET to 0
+ if needed. */
- mode1 = (VECTOR_MODE_P (tmode)
- ? mode
- : mode_for_size (bitsize, GET_MODE_CLASS (tmode), 0));
-
- if (((GET_CODE (op0) != MEM
- && TRULY_NOOP_TRUNCATION (GET_MODE_BITSIZE (mode),
- GET_MODE_BITSIZE (GET_MODE (op0)))
- && GET_MODE_SIZE (mode1) != 0
- && byte_offset % GET_MODE_SIZE (mode1) == 0)
- || (GET_CODE (op0) == MEM
- && (! SLOW_UNALIGNED_ACCESS (mode, MEM_ALIGN (op0))
- || (offset * BITS_PER_UNIT % bitsize == 0
- && MEM_ALIGN (op0) % bitsize == 0))))
- && ((bitsize >= BITS_PER_WORD && bitsize == GET_MODE_BITSIZE (mode)
- && bitpos % BITS_PER_WORD == 0)
- || (mode_for_size (bitsize, GET_MODE_CLASS (tmode), 0) != BLKmode
- /* ??? The big endian test here is wrong. This is correct
- if the value is in a register, and if mode_for_size is not
- the same mode as op0. This causes us to get unnecessarily
- inefficient code from the Thumb port when -mbig-endian. */
- && (BYTES_BIG_ENDIAN
- ? bitpos + bitsize == BITS_PER_WORD
- : bitpos == 0))))
+ /* Only scalar integer modes can be converted via subregs. There is an
+ additional problem for FP modes here in that they can have a precision
+ which is different from the size. mode_for_size uses precision, but
+ we want a mode based on the size, so we must avoid calling it for FP
+ modes. */
+ mode1 = (SCALAR_INT_MODE_P (tmode)
+ ? mode_for_size (bitsize, GET_MODE_CLASS (tmode), 0)
+ : mode);
+
+ if (((bitsize >= BITS_PER_WORD && bitsize == GET_MODE_BITSIZE (mode)
+ && bitpos % BITS_PER_WORD == 0)
+ || (mode1 != BLKmode
+ /* ??? The big endian test here is wrong. This is correct
+ if the value is in a register, and if mode_for_size is not
+ the same mode as op0. This causes us to get unnecessarily
+ inefficient code from the Thumb port when -mbig-endian. */
+ && (BYTES_BIG_ENDIAN
+ ? bitpos + bitsize == BITS_PER_WORD
+ : bitpos == 0)))
+ && ((GET_CODE (op0) != MEM
+ && TRULY_NOOP_TRUNCATION (GET_MODE_BITSIZE (mode),
+ GET_MODE_BITSIZE (GET_MODE (op0)))
+ && GET_MODE_SIZE (mode1) != 0
+ && byte_offset % GET_MODE_SIZE (mode1) == 0)
+ || (GET_CODE (op0) == MEM
+ && (! SLOW_UNALIGNED_ACCESS (mode, MEM_ALIGN (op0))
+ || (offset * BITS_PER_UNIT % bitsize == 0
+ && MEM_ALIGN (op0) % bitsize == 0)))))
{
if (mode1 != GET_MODE (op0))
{
/* Else we've got some float mode source being extracted into
a different float mode destination -- this combination of
subregs results in Severe Tire Damage. */
- abort ();
+ goto no_subreg_mode_swap;
}
- if (GET_CODE (op0) == REG)
+ if (REG_P (op0))
op0 = gen_rtx_SUBREG (mode1, op0, byte_offset);
else
op0 = adjust_address (op0, mode1, offset);
return convert_to_mode (tmode, op0, unsignedp);
return op0;
}
+ no_subreg_mode_swap:
/* Handle fields bigger than a word. */
-
+
if (bitsize > BITS_PER_WORD)
{
/* Here we transfer the words of the field
unsigned int nwords = (bitsize + (BITS_PER_WORD - 1)) / BITS_PER_WORD;
unsigned int i;
- if (target == 0 || GET_CODE (target) != REG)
+ if (target == 0 || !REG_P (target))
target = gen_reg_rtx (mode);
/* Indicate for flow that the entire target reg is being set. */
build_int_2 (GET_MODE_BITSIZE (mode) - bitsize, 0),
NULL_RTX, 0);
}
-
+
/* From here on we know the desired field is smaller than a word. */
/* Check if there is a correspondingly-sized integer field, so we can
safely extract it as one size of integer, if necessary; then
truncate or extend to the size that is wanted; then use SUBREGs or
convert_to_mode to get one of the modes we really wanted. */
-
+
int_mode = int_mode_for_mode (tmode);
if (int_mode == BLKmode)
int_mode = int_mode_for_mode (mode);
if (offset != 0
|| GET_MODE_SIZE (GET_MODE (op0)) > UNITS_PER_WORD)
{
- if (GET_CODE (op0) != REG)
+ if (!REG_P (op0))
op0 = copy_to_reg (op0);
op0 = gen_rtx_SUBREG (mode_for_size (BITS_PER_WORD, MODE_INT, 0),
op0, (offset * UNITS_PER_WORD));
{
if (HAVE_extzv
&& (GET_MODE_BITSIZE (extzv_mode) >= bitsize)
- && ! ((GET_CODE (op0) == REG || GET_CODE (op0) == SUBREG)
+ && ! ((REG_P (op0) || GET_CODE (op0) == SUBREG)
&& (bitsize + bitpos > GET_MODE_BITSIZE (extzv_mode))))
{
unsigned HOST_WIDE_INT xbitpos = bitpos, xoffset = offset;
SImode). to make it acceptable to the format of extzv. */
if (GET_CODE (xop0) == SUBREG && GET_MODE (xop0) != maxmode)
goto extzv_loses;
- if (GET_CODE (xop0) == REG && GET_MODE (xop0) != maxmode)
+ if (REG_P (xop0) && GET_MODE (xop0) != maxmode)
xop0 = gen_rtx_SUBREG (maxmode, xop0, 0);
/* On big-endian machines, we count bits from the most significant.
if (GET_MODE (xtarget) != maxmode)
{
- if (GET_CODE (xtarget) == REG)
+ if (REG_P (xtarget))
{
int wider = (GET_MODE_SIZE (maxmode)
> GET_MODE_SIZE (GET_MODE (xtarget)));
}
else
extzv_loses:
- target = extract_fixed_bit_field (int_mode, op0, offset, bitsize,
+ target = extract_fixed_bit_field (int_mode, op0, offset, bitsize,
bitpos, target, 1);
}
else
{
if (HAVE_extv
&& (GET_MODE_BITSIZE (extv_mode) >= bitsize)
- && ! ((GET_CODE (op0) == REG || GET_CODE (op0) == SUBREG)
+ && ! ((REG_P (op0) || GET_CODE (op0) == SUBREG)
&& (bitsize + bitpos > GET_MODE_BITSIZE (extv_mode))))
{
int xbitpos = bitpos, xoffset = offset;
SImode) to make it acceptable to the format of extv. */
if (GET_CODE (xop0) == SUBREG && GET_MODE (xop0) != maxmode)
goto extv_loses;
- if (GET_CODE (xop0) == REG && GET_MODE (xop0) != maxmode)
+ if (REG_P (xop0) && GET_MODE (xop0) != maxmode)
xop0 = gen_rtx_SUBREG (maxmode, xop0, 0);
/* On big-endian machines, we count bits from the most significant.
if (GET_MODE (xtarget) != maxmode)
{
- if (GET_CODE (xtarget) == REG)
+ if (REG_P (xtarget))
{
int wider = (GET_MODE_SIZE (maxmode)
> GET_MODE_SIZE (GET_MODE (xtarget)));
target = extract_fixed_bit_field (int_mode, op0, offset, bitsize,
bitpos, target, 0);
}
- }
+ }
else
extv_loses:
- target = extract_fixed_bit_field (int_mode, op0, offset, bitsize,
+ target = extract_fixed_bit_field (int_mode, op0, offset, bitsize,
bitpos, target, 0);
}
if (target == spec_target)
/* If the target mode is floating-point, first convert to the
integer mode of that size and then access it as a floating-point
value via a SUBREG. */
- if (GET_MODE_CLASS (tmode) == MODE_FLOAT)
+ if (GET_MODE_CLASS (tmode) != MODE_INT
+ && GET_MODE_CLASS (tmode) != MODE_PARTIAL_INT)
{
target = convert_to_mode (mode_for_size (GET_MODE_BITSIZE (tmode),
MODE_INT, 0),
target, unsignedp);
- if (GET_CODE (target) != REG)
- target = copy_to_reg (target);
- return gen_rtx_SUBREG (tmode, target, 0);
+ return gen_lowpart (tmode, target);
}
else
return convert_to_mode (tmode, target, unsignedp);
If TARGET is not used, create a pseudo-reg of mode TMODE for the value. */
static rtx
-extract_fixed_bit_field (tmode, op0, offset, bitsize, bitpos,
- target, unsignedp)
- enum machine_mode tmode;
- rtx op0, target;
- unsigned HOST_WIDE_INT offset, bitsize, bitpos;
- int unsignedp;
+extract_fixed_bit_field (enum machine_mode tmode, rtx op0,
+ unsigned HOST_WIDE_INT offset,
+ unsigned HOST_WIDE_INT bitsize,
+ unsigned HOST_WIDE_INT bitpos, rtx target,
+ int unsignedp)
{
unsigned int total_bits = BITS_PER_WORD;
enum machine_mode mode;
- if (GET_CODE (op0) == SUBREG || GET_CODE (op0) == REG)
+ if (GET_CODE (op0) == SUBREG || REG_P (op0))
{
/* Special treatment for a bit field split across two registers. */
if (bitsize + bitpos > BITS_PER_WORD)
tree amount = build_int_2 (bitpos, 0);
/* Maybe propagate the target for the shift. */
/* But not if we will return it--could confuse integrate.c. */
- rtx subtarget = (target != 0 && GET_CODE (target) == REG
- && !REG_FUNCTION_VALUE_P (target)
- ? target : 0);
+ rtx subtarget = (target != 0 && REG_P (target) ? target : 0);
if (tmode != mode) subtarget = 0;
op0 = expand_shift (RSHIFT_EXPR, mode, op0, amount, subtarget, 1);
}
tree amount
= build_int_2 (GET_MODE_BITSIZE (mode) - (bitsize + bitpos), 0);
/* Maybe propagate the target for the shift. */
- /* But not if we will return the result--could confuse integrate.c. */
- rtx subtarget = (target != 0 && GET_CODE (target) == REG
- && ! REG_FUNCTION_VALUE_P (target)
- ? target : 0);
+ rtx subtarget = (target != 0 && REG_P (target) ? target : 0);
op0 = expand_shift (LSHIFT_EXPR, mode, op0, amount, subtarget, 1);
}
return expand_shift (RSHIFT_EXPR, mode, op0,
- build_int_2 (GET_MODE_BITSIZE (mode) - bitsize, 0),
+ build_int_2 (GET_MODE_BITSIZE (mode) - bitsize, 0),
target, 0);
}
\f
BITSIZE+BITPOS is too small for MODE. */
static rtx
-mask_rtx (mode, bitpos, bitsize, complement)
- enum machine_mode mode;
- int bitpos, bitsize, complement;
+mask_rtx (enum machine_mode mode, int bitpos, int bitsize, int complement)
{
HOST_WIDE_INT masklow, maskhigh;
- if (bitpos < HOST_BITS_PER_WIDE_INT)
+ if (bitsize == 0)
+ masklow = 0;
+ else if (bitpos < HOST_BITS_PER_WIDE_INT)
masklow = (HOST_WIDE_INT) -1 << bitpos;
else
masklow = 0;
if (bitpos + bitsize < HOST_BITS_PER_WIDE_INT)
masklow &= ((unsigned HOST_WIDE_INT) -1
>> (HOST_BITS_PER_WIDE_INT - bitpos - bitsize));
-
+
if (bitpos <= HOST_BITS_PER_WIDE_INT)
maskhigh = -1;
else
maskhigh = (HOST_WIDE_INT) -1 << (bitpos - HOST_BITS_PER_WIDE_INT);
- if (bitpos + bitsize > HOST_BITS_PER_WIDE_INT)
+ if (bitsize == 0)
+ maskhigh = 0;
+ else if (bitpos + bitsize > HOST_BITS_PER_WIDE_INT)
maskhigh &= ((unsigned HOST_WIDE_INT) -1
>> (2 * HOST_BITS_PER_WIDE_INT - bitpos - bitsize));
else
VALUE truncated to BITSIZE bits and then shifted left BITPOS bits. */
static rtx
-lshift_value (mode, value, bitpos, bitsize)
- enum machine_mode mode;
- rtx value;
- int bitpos, bitsize;
+lshift_value (enum machine_mode mode, rtx value, int bitpos, int bitsize)
{
unsigned HOST_WIDE_INT v = INTVAL (value);
HOST_WIDE_INT low, high;
UNSIGNEDP is 1 if should zero-extend the contents; else sign-extend. */
static rtx
-extract_split_bit_field (op0, bitsize, bitpos, unsignedp)
- rtx op0;
- unsigned HOST_WIDE_INT bitsize, bitpos;
- int unsignedp;
+extract_split_bit_field (rtx op0, unsigned HOST_WIDE_INT bitsize,
+ unsigned HOST_WIDE_INT bitpos, int unsignedp)
{
unsigned int unit;
unsigned int bitsdone = 0;
/* Make sure UNIT isn't larger than BITS_PER_WORD, we can only handle that
much at a time. */
- if (GET_CODE (op0) == REG || GET_CODE (op0) == SUBREG)
+ if (REG_P (op0) || GET_CODE (op0) == SUBREG)
unit = BITS_PER_WORD;
else
unit = MIN (MEM_ALIGN (op0), BITS_PER_WORD);
GET_MODE (SUBREG_REG (op0)));
offset = 0;
}
- else if (GET_CODE (op0) == REG)
+ else if (REG_P (op0))
{
word = operand_subword_force (op0, offset, GET_MODE (op0));
offset = 0;
/* Add INC into TARGET. */
void
-expand_inc (target, inc)
- rtx target, inc;
+expand_inc (rtx target, rtx inc)
{
rtx value = expand_binop (GET_MODE (target), add_optab,
target, inc,
/* Subtract DEC from TARGET. */
void
-expand_dec (target, dec)
- rtx target, dec;
+expand_dec (rtx target, rtx dec)
{
rtx value = expand_binop (GET_MODE (target), sub_optab,
target, dec,
Return the rtx for where the value is. */
rtx
-expand_shift (code, mode, shifted, amount, target, unsignedp)
- enum tree_code code;
- enum machine_mode mode;
- rtx shifted;
- tree amount;
- rtx target;
- int unsignedp;
+expand_shift (enum tree_code code, enum machine_mode mode, rtx shifted,
+ tree amount, rtx target, int unsignedp)
{
rtx op1, temp = 0;
int left = (code == LSHIFT_EXPR || code == LROTATE_EXPR);
op1 = expand_expr (amount, NULL_RTX, VOIDmode, 0);
-#ifdef SHIFT_COUNT_TRUNCATED
if (SHIFT_COUNT_TRUNCATED)
{
if (GET_CODE (op1) == CONST_INT
- && ((unsigned HOST_WIDE_INT) INTVAL (op1) >=
+ && ((unsigned HOST_WIDE_INT) INTVAL (op1) >=
(unsigned HOST_WIDE_INT) GET_MODE_BITSIZE (mode)))
- op1 = GEN_INT ((unsigned HOST_WIDE_INT) INTVAL (op1)
+ op1 = GEN_INT ((unsigned HOST_WIDE_INT) INTVAL (op1)
% GET_MODE_BITSIZE (mode));
else if (GET_CODE (op1) == SUBREG
- && SUBREG_BYTE (op1) == 0)
+ && subreg_lowpart_p (op1))
op1 = SUBREG_REG (op1);
}
-#endif
if (op1 == const0_rtx)
return shifted;
&& (unsigned int) INTVAL (op1) < GET_MODE_BITSIZE (mode))
temp = expand_binop (mode,
left ? rotr_optab : rotl_optab,
- shifted,
+ shifted,
GEN_INT (GET_MODE_BITSIZE (mode)
- INTVAL (op1)),
target, unsignedp, methods);
}
/* We used to try extzv here for logical right shifts, but that was
- only useful for one machine, the VAX, and caused poor code
+ only useful for one machine, the VAX, and caused poor code
generation there for lshrdi3, so the code was deleted and a
define_expand for lshrsi3 was added to vax.md. */
}
char log[MAX_BITS_PER_WORD];
};
-static void synth_mult PARAMS ((struct algorithm *,
- unsigned HOST_WIDE_INT,
- int));
-static unsigned HOST_WIDE_INT choose_multiplier PARAMS ((unsigned HOST_WIDE_INT,
- int, int,
- unsigned HOST_WIDE_INT *,
- int *, int *));
-static unsigned HOST_WIDE_INT invert_mod2n PARAMS ((unsigned HOST_WIDE_INT,
- int));
+/* Indicates the type of fixup needed after a constant multiplication.
+ BASIC_VARIANT means no fixup is needed, NEGATE_VARIANT means that
+ the result should be negated, and ADD_VARIANT means that the
+ multiplicand should be added to the result. */
+enum mult_variant {basic_variant, negate_variant, add_variant};
+
+static void synth_mult (struct algorithm *, unsigned HOST_WIDE_INT,
+ int, enum machine_mode mode);
+static bool choose_mult_variant (enum machine_mode, HOST_WIDE_INT,
+ struct algorithm *, enum mult_variant *, int);
+static rtx expand_mult_const (enum machine_mode, rtx, HOST_WIDE_INT, rtx,
+ const struct algorithm *, enum mult_variant);
+static unsigned HOST_WIDE_INT choose_multiplier (unsigned HOST_WIDE_INT, int,
+ int, unsigned HOST_WIDE_INT *,
+ int *, int *);
+static unsigned HOST_WIDE_INT invert_mod2n (unsigned HOST_WIDE_INT, int);
+static rtx extract_high_half (enum machine_mode, rtx);
+static rtx expand_mult_highpart_optab (enum machine_mode, rtx, rtx, rtx,
+ int, int);
/* Compute and return the best algorithm for multiplying by T.
The algorithm must cost less than cost_limit
If retval.cost >= COST_LIMIT, no algorithm was found and all
- other field of the returned struct are undefined. */
+ other field of the returned struct are undefined.
+ MODE is the machine mode of the multiplication. */
static void
-synth_mult (alg_out, t, cost_limit)
- struct algorithm *alg_out;
- unsigned HOST_WIDE_INT t;
- int cost_limit;
+synth_mult (struct algorithm *alg_out, unsigned HOST_WIDE_INT t,
+ int cost_limit, enum machine_mode mode)
{
int m;
struct algorithm *alg_in, *best_alg;
int cost;
unsigned HOST_WIDE_INT q;
+ int maxm = MIN (BITS_PER_WORD, GET_MODE_BITSIZE (mode));
/* Indicate that no algorithm is yet found. If no algorithm
is found, this value will be returned and indicate failure. */
if (cost_limit <= 0)
return;
+ /* Restrict the bits of "t" to the multiplication's mode. */
+ t &= GET_MODE_MASK (mode);
+
/* t == 1 can be done in zero cost. */
if (t == 1)
{
/* We'll be needing a couple extra algorithm structures now. */
- alg_in = (struct algorithm *)alloca (sizeof (struct algorithm));
- best_alg = (struct algorithm *)alloca (sizeof (struct algorithm));
+ alg_in = alloca (sizeof (struct algorithm));
+ best_alg = alloca (sizeof (struct algorithm));
/* If we have a group of zero bits at the low-order part of T, try
multiplying by the remaining bits and then doing a shift. */
if ((t & 1) == 0)
{
m = floor_log2 (t & -t); /* m = number of low zero bits */
- if (m < BITS_PER_WORD)
+ if (m < maxm)
{
q = t >> m;
- cost = shift_cost[m];
- synth_mult (alg_in, q, cost_limit - cost);
+ cost = shift_cost[mode][m];
+ synth_mult (alg_in, q, cost_limit - cost, mode);
cost += alg_in->cost;
if (cost < cost_limit)
for (w = 1; (w & t) != 0; w <<= 1)
;
/* If T was -1, then W will be zero after the loop. This is another
- case where T ends with ...111. Handling this with (T + 1) and
+ case where T ends with ...111. Handling this with (T + 1) and
subtract 1 produces slightly better code and results in algorithm
selection much faster than treating it like the ...0111 case
below. */
{
/* T ends with ...111. Multiply by (T + 1) and subtract 1. */
- cost = add_cost;
- synth_mult (alg_in, t + 1, cost_limit - cost);
+ cost = add_cost[mode];
+ synth_mult (alg_in, t + 1, cost_limit - cost, mode);
cost += alg_in->cost;
if (cost < cost_limit)
{
/* T ends with ...01 or ...011. Multiply by (T - 1) and add 1. */
- cost = add_cost;
- synth_mult (alg_in, t - 1, cost_limit - cost);
+ cost = add_cost[mode];
+ synth_mult (alg_in, t - 1, cost_limit - cost, mode);
cost += alg_in->cost;
if (cost < cost_limit)
unsigned HOST_WIDE_INT d;
d = ((unsigned HOST_WIDE_INT) 1 << m) + 1;
- if (t % d == 0 && t > d && m < BITS_PER_WORD)
+ if (t % d == 0 && t > d && m < maxm)
{
- cost = MIN (shiftadd_cost[m], add_cost + shift_cost[m]);
- synth_mult (alg_in, t / d, cost_limit - cost);
+ cost = add_cost[mode] + shift_cost[mode][m];
+ if (shiftadd_cost[mode][m] < cost)
+ cost = shiftadd_cost[mode][m];
+ synth_mult (alg_in, t / d, cost_limit - cost, mode);
cost += alg_in->cost;
if (cost < cost_limit)
}
d = ((unsigned HOST_WIDE_INT) 1 << m) - 1;
- if (t % d == 0 && t > d && m < BITS_PER_WORD)
+ if (t % d == 0 && t > d && m < maxm)
{
- cost = MIN (shiftsub_cost[m], add_cost + shift_cost[m]);
- synth_mult (alg_in, t / d, cost_limit - cost);
+ cost = add_cost[mode] + shift_cost[mode][m];
+ if (shiftsub_cost[mode][m] < cost)
+ cost = shiftsub_cost[mode][m];
+ synth_mult (alg_in, t / d, cost_limit - cost, mode);
cost += alg_in->cost;
if (cost < cost_limit)
q = t - 1;
q = q & -q;
m = exact_log2 (q);
- if (m >= 0 && m < BITS_PER_WORD)
+ if (m >= 0 && m < maxm)
{
- cost = shiftadd_cost[m];
- synth_mult (alg_in, (t - 1) >> m, cost_limit - cost);
+ cost = shiftadd_cost[mode][m];
+ synth_mult (alg_in, (t - 1) >> m, cost_limit - cost, mode);
cost += alg_in->cost;
if (cost < cost_limit)
q = t + 1;
q = q & -q;
m = exact_log2 (q);
- if (m >= 0 && m < BITS_PER_WORD)
+ if (m >= 0 && m < maxm)
{
- cost = shiftsub_cost[m];
- synth_mult (alg_in, (t + 1) >> m, cost_limit - cost);
+ cost = shiftsub_cost[mode][m];
+ synth_mult (alg_in, (t + 1) >> m, cost_limit - cost, mode);
cost += alg_in->cost;
if (cost < cost_limit)
alg_out->ops * sizeof *alg_out->log);
}
\f
+/* Find the cheapest way of multiplying a value of mode MODE by VAL.
+ Try three variations:
+
+ - a shift/add sequence based on VAL itself
+ - a shift/add sequence based on -VAL, followed by a negation
+ - a shift/add sequence based on VAL - 1, followed by an addition.
+
+ Return true if the cheapest of these cost less than MULT_COST,
+ describing the algorithm in *ALG and final fixup in *VARIANT. */
+
+static bool
+choose_mult_variant (enum machine_mode mode, HOST_WIDE_INT val,
+ struct algorithm *alg, enum mult_variant *variant,
+ int mult_cost)
+{
+ struct algorithm alg2;
+
+ *variant = basic_variant;
+ synth_mult (alg, val, mult_cost, mode);
+
+ /* This works only if the inverted value actually fits in an
+ `unsigned int' */
+ if (HOST_BITS_PER_INT >= GET_MODE_BITSIZE (mode))
+ {
+ synth_mult (&alg2, -val, MIN (alg->cost, mult_cost) - neg_cost[mode],
+ mode);
+ alg2.cost += neg_cost[mode];
+ if (alg2.cost < alg->cost)
+ *alg = alg2, *variant = negate_variant;
+ }
+
+ /* This proves very useful for division-by-constant. */
+ synth_mult (&alg2, val - 1, MIN (alg->cost, mult_cost) - add_cost[mode],
+ mode);
+ alg2.cost += add_cost[mode];
+ if (alg2.cost < alg->cost)
+ *alg = alg2, *variant = add_variant;
+
+ return alg->cost < mult_cost;
+}
+
+/* A subroutine of expand_mult, used for constant multiplications.
+ Multiply OP0 by VAL in mode MODE, storing the result in TARGET if
+ convenient. Use the shift/add sequence described by ALG and apply
+ the final fixup specified by VARIANT. */
+
+static rtx
+expand_mult_const (enum machine_mode mode, rtx op0, HOST_WIDE_INT val,
+ rtx target, const struct algorithm *alg,
+ enum mult_variant variant)
+{
+ HOST_WIDE_INT val_so_far;
+ rtx insn, accum, tem;
+ int opno;
+ enum machine_mode nmode;
+
+ /* op0 must be register to make mult_cost match the precomputed
+ shiftadd_cost array. */
+ op0 = protect_from_queue (op0, 0);
+
+ /* Avoid referencing memory over and over.
+ For speed, but also for correctness when mem is volatile. */
+ if (GET_CODE (op0) == MEM)
+ op0 = force_reg (mode, op0);
+
+ /* ACCUM starts out either as OP0 or as a zero, depending on
+ the first operation. */
+
+ if (alg->op[0] == alg_zero)
+ {
+ accum = copy_to_mode_reg (mode, const0_rtx);
+ val_so_far = 0;
+ }
+ else if (alg->op[0] == alg_m)
+ {
+ accum = copy_to_mode_reg (mode, op0);
+ val_so_far = 1;
+ }
+ else
+ abort ();
+
+ for (opno = 1; opno < alg->ops; opno++)
+ {
+ int log = alg->log[opno];
+ int preserve = preserve_subexpressions_p ();
+ rtx shift_subtarget = preserve ? 0 : accum;
+ rtx add_target
+ = (opno == alg->ops - 1 && target != 0 && variant != add_variant
+ && ! preserve)
+ ? target : 0;
+ rtx accum_target = preserve ? 0 : accum;
+
+ switch (alg->op[opno])
+ {
+ case alg_shift:
+ accum = expand_shift (LSHIFT_EXPR, mode, accum,
+ build_int_2 (log, 0), NULL_RTX, 0);
+ val_so_far <<= log;
+ break;
+
+ case alg_add_t_m2:
+ tem = expand_shift (LSHIFT_EXPR, mode, op0,
+ build_int_2 (log, 0), NULL_RTX, 0);
+ accum = force_operand (gen_rtx_PLUS (mode, accum, tem),
+ add_target ? add_target : accum_target);
+ val_so_far += (HOST_WIDE_INT) 1 << log;
+ break;
+
+ case alg_sub_t_m2:
+ tem = expand_shift (LSHIFT_EXPR, mode, op0,
+ build_int_2 (log, 0), NULL_RTX, 0);
+ accum = force_operand (gen_rtx_MINUS (mode, accum, tem),
+ add_target ? add_target : accum_target);
+ val_so_far -= (HOST_WIDE_INT) 1 << log;
+ break;
+
+ case alg_add_t2_m:
+ accum = expand_shift (LSHIFT_EXPR, mode, accum,
+ build_int_2 (log, 0), shift_subtarget,
+ 0);
+ accum = force_operand (gen_rtx_PLUS (mode, accum, op0),
+ add_target ? add_target : accum_target);
+ val_so_far = (val_so_far << log) + 1;
+ break;
+
+ case alg_sub_t2_m:
+ accum = expand_shift (LSHIFT_EXPR, mode, accum,
+ build_int_2 (log, 0), shift_subtarget, 0);
+ accum = force_operand (gen_rtx_MINUS (mode, accum, op0),
+ add_target ? add_target : accum_target);
+ val_so_far = (val_so_far << log) - 1;
+ break;
+
+ case alg_add_factor:
+ tem = expand_shift (LSHIFT_EXPR, mode, accum,
+ build_int_2 (log, 0), NULL_RTX, 0);
+ accum = force_operand (gen_rtx_PLUS (mode, accum, tem),
+ add_target ? add_target : accum_target);
+ val_so_far += val_so_far << log;
+ break;
+
+ case alg_sub_factor:
+ tem = expand_shift (LSHIFT_EXPR, mode, accum,
+ build_int_2 (log, 0), NULL_RTX, 0);
+ accum = force_operand (gen_rtx_MINUS (mode, tem, accum),
+ (add_target ? add_target
+ : preserve ? 0 : tem));
+ val_so_far = (val_so_far << log) - val_so_far;
+ break;
+
+ default:
+ abort ();
+ }
+
+ /* Write a REG_EQUAL note on the last insn so that we can cse
+ multiplication sequences. Note that if ACCUM is a SUBREG,
+ we've set the inner register and must properly indicate
+ that. */
+
+ tem = op0, nmode = mode;
+ if (GET_CODE (accum) == SUBREG)
+ {
+ nmode = GET_MODE (SUBREG_REG (accum));
+ tem = gen_lowpart (nmode, op0);
+ }
+
+ insn = get_last_insn ();
+ set_unique_reg_note (insn, REG_EQUAL,
+ gen_rtx_MULT (nmode, tem, GEN_INT (val_so_far)));
+ }
+
+ if (variant == negate_variant)
+ {
+ val_so_far = -val_so_far;
+ accum = expand_unop (mode, neg_optab, accum, target, 0);
+ }
+ else if (variant == add_variant)
+ {
+ val_so_far = val_so_far + 1;
+ accum = force_operand (gen_rtx_PLUS (mode, accum, op0), target);
+ }
+
+ /* Compare only the bits of val and val_so_far that are significant
+ in the result mode, to avoid sign-/zero-extension confusion. */
+ val &= GET_MODE_MASK (mode);
+ val_so_far &= GET_MODE_MASK (mode);
+ if (val != val_so_far)
+ abort ();
+
+ return accum;
+}
+
/* Perform a multiplication and return an rtx for the result.
MODE is mode of value; OP0 and OP1 are what to multiply (rtx's);
TARGET is a suggestion for where to store the result (an rtx).
you should swap the two operands if OP0 would be constant. */
rtx
-expand_mult (mode, op0, op1, target, unsignedp)
- enum machine_mode mode;
- rtx op0, op1, target;
- int unsignedp;
+expand_mult (enum machine_mode mode, rtx op0, rtx op1, rtx target,
+ int unsignedp)
{
rtx const_op1 = op1;
+ enum mult_variant variant;
+ struct algorithm algorithm;
/* synth_mult does an `unsigned int' multiply. As long as the mode is
less than or equal in size to `unsigned int' this doesn't matter.
that it seems better to use synth_mult always. */
if (const_op1 && GET_CODE (const_op1) == CONST_INT
- && (unsignedp || ! flag_trapv))
+ && (unsignedp || !flag_trapv))
{
- struct algorithm alg;
- struct algorithm alg2;
- HOST_WIDE_INT val = INTVAL (op1);
- HOST_WIDE_INT val_so_far;
- rtx insn;
- int mult_cost;
- enum {basic_variant, negate_variant, add_variant} variant = basic_variant;
-
- /* op0 must be register to make mult_cost match the precomputed
- shiftadd_cost array. */
- op0 = force_reg (mode, op0);
-
- /* Try to do the computation three ways: multiply by the negative of OP1
- and then negate, do the multiplication directly, or do multiplication
- by OP1 - 1. */
-
- mult_cost = rtx_cost (gen_rtx_MULT (mode, op0, op1), SET);
- mult_cost = MIN (12 * add_cost, mult_cost);
-
- synth_mult (&alg, val, mult_cost);
-
- /* This works only if the inverted value actually fits in an
- `unsigned int' */
- if (HOST_BITS_PER_INT >= GET_MODE_BITSIZE (mode))
- {
- synth_mult (&alg2, - val,
- (alg.cost < mult_cost ? alg.cost : mult_cost) - negate_cost);
- if (alg2.cost + negate_cost < alg.cost)
- alg = alg2, variant = negate_variant;
- }
-
- /* This proves very useful for division-by-constant. */
- synth_mult (&alg2, val - 1,
- (alg.cost < mult_cost ? alg.cost : mult_cost) - add_cost);
- if (alg2.cost + add_cost < alg.cost)
- alg = alg2, variant = add_variant;
-
- if (alg.cost < mult_cost)
- {
- /* We found something cheaper than a multiply insn. */
- int opno;
- rtx accum, tem;
- enum machine_mode nmode;
-
- op0 = protect_from_queue (op0, 0);
-
- /* Avoid referencing memory over and over.
- For speed, but also for correctness when mem is volatile. */
- if (GET_CODE (op0) == MEM)
- op0 = force_reg (mode, op0);
-
- /* ACCUM starts out either as OP0 or as a zero, depending on
- the first operation. */
-
- if (alg.op[0] == alg_zero)
- {
- accum = copy_to_mode_reg (mode, const0_rtx);
- val_so_far = 0;
- }
- else if (alg.op[0] == alg_m)
- {
- accum = copy_to_mode_reg (mode, op0);
- val_so_far = 1;
- }
- else
- abort ();
-
- for (opno = 1; opno < alg.ops; opno++)
- {
- int log = alg.log[opno];
- int preserve = preserve_subexpressions_p ();
- rtx shift_subtarget = preserve ? 0 : accum;
- rtx add_target
- = (opno == alg.ops - 1 && target != 0 && variant != add_variant
- && ! preserve)
- ? target : 0;
- rtx accum_target = preserve ? 0 : accum;
-
- switch (alg.op[opno])
- {
- case alg_shift:
- accum = expand_shift (LSHIFT_EXPR, mode, accum,
- build_int_2 (log, 0), NULL_RTX, 0);
- val_so_far <<= log;
- break;
-
- case alg_add_t_m2:
- tem = expand_shift (LSHIFT_EXPR, mode, op0,
- build_int_2 (log, 0), NULL_RTX, 0);
- accum = force_operand (gen_rtx_PLUS (mode, accum, tem),
- add_target
- ? add_target : accum_target);
- val_so_far += (HOST_WIDE_INT) 1 << log;
- break;
-
- case alg_sub_t_m2:
- tem = expand_shift (LSHIFT_EXPR, mode, op0,
- build_int_2 (log, 0), NULL_RTX, 0);
- accum = force_operand (gen_rtx_MINUS (mode, accum, tem),
- add_target
- ? add_target : accum_target);
- val_so_far -= (HOST_WIDE_INT) 1 << log;
- break;
-
- case alg_add_t2_m:
- accum = expand_shift (LSHIFT_EXPR, mode, accum,
- build_int_2 (log, 0), shift_subtarget,
- 0);
- accum = force_operand (gen_rtx_PLUS (mode, accum, op0),
- add_target
- ? add_target : accum_target);
- val_so_far = (val_so_far << log) + 1;
- break;
-
- case alg_sub_t2_m:
- accum = expand_shift (LSHIFT_EXPR, mode, accum,
- build_int_2 (log, 0), shift_subtarget,
- 0);
- accum = force_operand (gen_rtx_MINUS (mode, accum, op0),
- add_target
- ? add_target : accum_target);
- val_so_far = (val_so_far << log) - 1;
- break;
-
- case alg_add_factor:
- tem = expand_shift (LSHIFT_EXPR, mode, accum,
- build_int_2 (log, 0), NULL_RTX, 0);
- accum = force_operand (gen_rtx_PLUS (mode, accum, tem),
- add_target
- ? add_target : accum_target);
- val_so_far += val_so_far << log;
- break;
-
- case alg_sub_factor:
- tem = expand_shift (LSHIFT_EXPR, mode, accum,
- build_int_2 (log, 0), NULL_RTX, 0);
- accum = force_operand (gen_rtx_MINUS (mode, tem, accum),
- (add_target ? add_target
- : preserve ? 0 : tem));
- val_so_far = (val_so_far << log) - val_so_far;
- break;
+ int mult_cost = rtx_cost (gen_rtx_MULT (mode, op0, op1), SET);
+ mult_cost = MIN (12 * add_cost[mode], mult_cost);
- default:
- abort ();
- }
-
- /* Write a REG_EQUAL note on the last insn so that we can cse
- multiplication sequences. Note that if ACCUM is a SUBREG,
- we've set the inner register and must properly indicate
- that. */
-
- tem = op0, nmode = mode;
- if (GET_CODE (accum) == SUBREG)
- {
- nmode = GET_MODE (SUBREG_REG (accum));
- tem = gen_lowpart (nmode, op0);
- }
-
- insn = get_last_insn ();
- set_unique_reg_note (insn,
- REG_EQUAL,
- gen_rtx_MULT (nmode, tem,
- GEN_INT (val_so_far)));
- }
+ if (choose_mult_variant (mode, INTVAL (const_op1), &algorithm, &variant,
+ mult_cost))
+ return expand_mult_const (mode, op0, INTVAL (const_op1), target,
+ &algorithm, variant);
+ }
- if (variant == negate_variant)
- {
- val_so_far = - val_so_far;
- accum = expand_unop (mode, neg_optab, accum, target, 0);
- }
- else if (variant == add_variant)
- {
- val_so_far = val_so_far + 1;
- accum = force_operand (gen_rtx_PLUS (mode, accum, op0), target);
- }
+ if (GET_CODE (op0) == CONST_DOUBLE)
+ {
+ rtx temp = op0;
+ op0 = op1;
+ op1 = temp;
+ }
- if (val != val_so_far)
- abort ();
+ /* Expand x*2.0 as x+x. */
+ if (GET_CODE (op1) == CONST_DOUBLE
+ && GET_MODE_CLASS (mode) == MODE_FLOAT)
+ {
+ REAL_VALUE_TYPE d;
+ REAL_VALUE_FROM_CONST_DOUBLE (d, op1);
- return accum;
+ if (REAL_VALUES_EQUAL (d, dconst2))
+ {
+ op0 = force_reg (GET_MODE (op0), op0);
+ return expand_binop (mode, add_optab, op0, op0,
+ target, unsignedp, OPTAB_LIB_WIDEN);
}
}
/* This used to use umul_optab if unsigned, but for non-widening multiply
there is no difference between signed and unsigned. */
- op0 = expand_binop (mode,
+ op0 = expand_binop (mode,
! unsignedp
- && flag_trapv && (GET_MODE_CLASS(mode) == MODE_INT)
- ? smulv_optab : smul_optab,
+ && flag_trapv && (GET_MODE_CLASS(mode) == MODE_INT)
+ ? smulv_optab : smul_optab,
op0, op1, target, unsignedp, OPTAB_LIB_WIDEN);
if (op0 == 0)
abort ();
/* Return the smallest n such that 2**n >= X. */
int
-ceil_log2 (x)
- unsigned HOST_WIDE_INT x;
+ceil_log2 (unsigned HOST_WIDE_INT x)
{
return floor_log2 (x - 1) + 1;
}
static
unsigned HOST_WIDE_INT
-choose_multiplier (d, n, precision, multiplier_ptr, post_shift_ptr, lgup_ptr)
- unsigned HOST_WIDE_INT d;
- int n;
- int precision;
- unsigned HOST_WIDE_INT *multiplier_ptr;
- int *post_shift_ptr;
- int *lgup_ptr;
+choose_multiplier (unsigned HOST_WIDE_INT d, int n, int precision,
+ unsigned HOST_WIDE_INT *multiplier_ptr,
+ int *post_shift_ptr, int *lgup_ptr)
{
HOST_WIDE_INT mhigh_hi, mlow_hi;
unsigned HOST_WIDE_INT mhigh_lo, mlow_lo;
abort ();
if (mhigh_hi > 1 || mlow_hi > 1)
abort ();
- /* assert that mlow < mhigh. */
+ /* Assert that mlow < mhigh. */
if (! (mlow_hi < mhigh_hi || (mlow_hi == mhigh_hi && mlow_lo < mhigh_lo)))
abort ();
/* If precision == N, then mlow, mhigh exceed 2^N
(but they do not exceed 2^(N+1)). */
- /* Reduce to lowest terms */
+ /* Reduce to lowest terms. */
for (post_shift = lgup; post_shift > 0; post_shift--)
{
unsigned HOST_WIDE_INT ml_lo = (mlow_hi << (HOST_BITS_PER_WIDE_INT - 1)) | (mlow_lo >> 1);
congruent to 1 (mod 2**N). */
static unsigned HOST_WIDE_INT
-invert_mod2n (x, n)
- unsigned HOST_WIDE_INT x;
- int n;
+invert_mod2n (unsigned HOST_WIDE_INT x, int n)
{
/* Solve x*y == 1 (mod 2^n), where x is odd. Return y. */
MODE is the mode of operation. */
rtx
-expand_mult_highpart_adjust (mode, adj_operand, op0, op1, target, unsignedp)
- enum machine_mode mode;
- rtx adj_operand, op0, op1, target;
- int unsignedp;
+expand_mult_highpart_adjust (enum machine_mode mode, rtx adj_operand, rtx op0,
+ rtx op1, rtx target, int unsignedp)
{
rtx tem;
enum rtx_code adj_code = unsignedp ? PLUS : MINUS;
tem = expand_shift (RSHIFT_EXPR, mode, op0,
build_int_2 (GET_MODE_BITSIZE (mode) - 1, 0),
NULL_RTX, 0);
- tem = expand_and (tem, op1, NULL_RTX);
+ tem = expand_and (mode, tem, op1, NULL_RTX);
adj_operand
= force_operand (gen_rtx_fmt_ee (adj_code, mode, adj_operand, tem),
adj_operand);
tem = expand_shift (RSHIFT_EXPR, mode, op1,
build_int_2 (GET_MODE_BITSIZE (mode) - 1, 0),
NULL_RTX, 0);
- tem = expand_and (tem, op0, NULL_RTX);
+ tem = expand_and (mode, tem, op0, NULL_RTX);
target = force_operand (gen_rtx_fmt_ee (adj_code, mode, adj_operand, tem),
target);
return target;
}
-/* Emit code to multiply OP0 and CNST1, putting the high half of the result
- in TARGET if that is convenient, and return where the result is. If the
- operation can not be performed, 0 is returned.
+/* Subroutine of expand_mult_highpart. Return the MODE high part of OP. */
- MODE is the mode of operation and result.
+static rtx
+extract_high_half (enum machine_mode mode, rtx op)
+{
+ enum machine_mode wider_mode;
- UNSIGNEDP nonzero means unsigned multiply.
+ if (mode == word_mode)
+ return gen_highpart (mode, op);
- MAX_COST is the total allowed cost for the expanded RTL. */
+ wider_mode = GET_MODE_WIDER_MODE (mode);
+ op = expand_shift (RSHIFT_EXPR, wider_mode, op,
+ build_int_2 (GET_MODE_BITSIZE (mode), 0), 0, 1);
+ return convert_modes (mode, wider_mode, op, 0);
+}
-rtx
-expand_mult_highpart (mode, op0, cnst1, target, unsignedp, max_cost)
- enum machine_mode mode;
- rtx op0, target;
- unsigned HOST_WIDE_INT cnst1;
- int unsignedp;
- int max_cost;
+/* Like expand_mult_highpart, but only consider using a multiplication
+ optab. OP1 is an rtx for the constant operand. */
+
+static rtx
+expand_mult_highpart_optab (enum machine_mode mode, rtx op0, rtx op1,
+ rtx target, int unsignedp, int max_cost)
{
- enum machine_mode wider_mode = GET_MODE_WIDER_MODE (mode);
- optab mul_highpart_optab;
+ rtx narrow_op1 = gen_int_mode (INTVAL (op1), mode);
+ enum machine_mode wider_mode;
optab moptab;
rtx tem;
- int size = GET_MODE_BITSIZE (mode);
- rtx op1, wide_op1;
-
- /* We can't support modes wider than HOST_BITS_PER_INT. */
- if (size > HOST_BITS_PER_WIDE_INT)
- abort ();
-
- op1 = GEN_INT (trunc_int_for_mode (cnst1, mode));
-
- if (GET_MODE_BITSIZE (wider_mode) <= HOST_BITS_PER_INT)
- wide_op1 = op1;
- else
- wide_op1
- = immed_double_const (cnst1,
- (unsignedp
- ? (HOST_WIDE_INT) 0
- : -(cnst1 >> (HOST_BITS_PER_WIDE_INT - 1))),
- wider_mode);
-
- /* expand_mult handles constant multiplication of word_mode
- or narrower. It does a poor job for large modes. */
- if (size < BITS_PER_WORD
- && mul_cost[(int) wider_mode] + shift_cost[size-1] < max_cost)
- {
- /* We have to do this, since expand_binop doesn't do conversion for
- multiply. Maybe change expand_binop to handle widening multiply? */
- op0 = convert_to_mode (wider_mode, op0, unsignedp);
-
- /* We know that this can't have signed overflow, so pretend this is
- an unsigned multiply. */
- tem = expand_mult (wider_mode, op0, wide_op1, NULL_RTX, 0);
- tem = expand_shift (RSHIFT_EXPR, wider_mode, tem,
- build_int_2 (size, 0), NULL_RTX, 1);
- return convert_modes (mode, wider_mode, tem, unsignedp);
- }
+ int size;
- if (target == 0)
- target = gen_reg_rtx (mode);
+ wider_mode = GET_MODE_WIDER_MODE (mode);
+ size = GET_MODE_BITSIZE (mode);
/* Firstly, try using a multiplication insn that only generates the needed
high part of the product, and in the sign flavor of unsignedp. */
- if (mul_highpart_cost[(int) mode] < max_cost)
+ if (mul_highpart_cost[mode] < max_cost)
{
- mul_highpart_optab = unsignedp ? umul_highpart_optab : smul_highpart_optab;
- target = expand_binop (mode, mul_highpart_optab,
- op0, op1, target, unsignedp, OPTAB_DIRECT);
- if (target)
- return target;
+ moptab = unsignedp ? umul_highpart_optab : smul_highpart_optab;
+ tem = expand_binop (mode, moptab, op0, narrow_op1, target,
+ unsignedp, OPTAB_DIRECT);
+ if (tem)
+ return tem;
}
/* Secondly, same as above, but use sign flavor opposite of unsignedp.
Need to adjust the result after the multiplication. */
if (size - 1 < BITS_PER_WORD
- && (mul_highpart_cost[(int) mode] + 2 * shift_cost[size-1] + 4 * add_cost
- < max_cost))
+ && (mul_highpart_cost[mode] + 2 * shift_cost[mode][size-1]
+ + 4 * add_cost[mode] < max_cost))
{
- mul_highpart_optab = unsignedp ? smul_highpart_optab : umul_highpart_optab;
- target = expand_binop (mode, mul_highpart_optab,
- op0, op1, target, unsignedp, OPTAB_DIRECT);
- if (target)
+ moptab = unsignedp ? smul_highpart_optab : umul_highpart_optab;
+ tem = expand_binop (mode, moptab, op0, narrow_op1, target,
+ unsignedp, OPTAB_DIRECT);
+ if (tem)
/* We used the wrong signedness. Adjust the result. */
- return expand_mult_highpart_adjust (mode, target, op0,
- op1, target, unsignedp);
+ return expand_mult_highpart_adjust (mode, tem, op0, narrow_op1,
+ tem, unsignedp);
}
/* Try widening multiplication. */
moptab = unsignedp ? umul_widen_optab : smul_widen_optab;
- if (moptab->handlers[(int) wider_mode].insn_code != CODE_FOR_nothing
- && mul_widen_cost[(int) wider_mode] < max_cost)
+ if (moptab->handlers[wider_mode].insn_code != CODE_FOR_nothing
+ && mul_widen_cost[wider_mode] < max_cost)
{
- op1 = force_reg (mode, op1);
- goto try;
- }
+ tem = expand_binop (wider_mode, moptab, op0, narrow_op1, 0,
+ unsignedp, OPTAB_WIDEN);
+ if (tem)
+ return extract_high_half (mode, tem);
+ }
/* Try widening the mode and perform a non-widening multiplication. */
moptab = smul_optab;
- if (smul_optab->handlers[(int) wider_mode].insn_code != CODE_FOR_nothing
+ if (smul_optab->handlers[wider_mode].insn_code != CODE_FOR_nothing
&& size - 1 < BITS_PER_WORD
- && mul_cost[(int) wider_mode] + shift_cost[size-1] < max_cost)
+ && mul_cost[wider_mode] + shift_cost[mode][size-1] < max_cost)
{
- op1 = wide_op1;
- goto try;
+ tem = expand_binop (wider_mode, moptab, op0, op1, 0,
+ unsignedp, OPTAB_WIDEN);
+ if (tem)
+ return extract_high_half (mode, tem);
}
/* Try widening multiplication of opposite signedness, and adjust. */
moptab = unsignedp ? smul_widen_optab : umul_widen_optab;
- if (moptab->handlers[(int) wider_mode].insn_code != CODE_FOR_nothing
+ if (moptab->handlers[wider_mode].insn_code != CODE_FOR_nothing
&& size - 1 < BITS_PER_WORD
- && (mul_widen_cost[(int) wider_mode]
- + 2 * shift_cost[size-1] + 4 * add_cost < max_cost))
+ && (mul_widen_cost[wider_mode] + 2 * shift_cost[mode][size-1]
+ + 4 * add_cost[mode] < max_cost))
{
- rtx regop1 = force_reg (mode, op1);
- tem = expand_binop (wider_mode, moptab, op0, regop1,
+ tem = expand_binop (wider_mode, moptab, op0, narrow_op1,
NULL_RTX, ! unsignedp, OPTAB_WIDEN);
if (tem != 0)
{
- /* Extract the high half of the just generated product. */
- tem = expand_shift (RSHIFT_EXPR, wider_mode, tem,
- build_int_2 (size, 0), NULL_RTX, 1);
- tem = convert_modes (mode, wider_mode, tem, unsignedp);
+ tem = extract_high_half (mode, tem);
/* We used the wrong signedness. Adjust the result. */
- return expand_mult_highpart_adjust (mode, tem, op0, op1,
+ return expand_mult_highpart_adjust (mode, tem, op0, narrow_op1,
target, unsignedp);
}
}
return 0;
+}
- try:
- /* Pass NULL_RTX as target since TARGET has wrong mode. */
- tem = expand_binop (wider_mode, moptab, op0, op1,
- NULL_RTX, unsignedp, OPTAB_WIDEN);
- if (tem == 0)
- return 0;
+/* Emit code to multiply OP0 and CNST1, putting the high half of the result
+ in TARGET if that is convenient, and return where the result is. If the
+ operation can not be performed, 0 is returned.
- /* Extract the high half of the just generated product. */
- if (mode == word_mode)
+ MODE is the mode of operation and result.
+
+ UNSIGNEDP nonzero means unsigned multiply.
+
+ MAX_COST is the total allowed cost for the expanded RTL. */
+
+rtx
+expand_mult_highpart (enum machine_mode mode, rtx op0,
+ unsigned HOST_WIDE_INT cnst1, rtx target,
+ int unsignedp, int max_cost)
+{
+ enum machine_mode wider_mode = GET_MODE_WIDER_MODE (mode);
+ int extra_cost;
+ bool sign_adjust = false;
+ enum mult_variant variant;
+ struct algorithm alg;
+ rtx op1, tem;
+
+ /* We can't support modes wider than HOST_BITS_PER_INT. */
+ if (GET_MODE_BITSIZE (mode) > HOST_BITS_PER_WIDE_INT)
+ abort ();
+
+ op1 = gen_int_mode (cnst1, wider_mode);
+ cnst1 &= GET_MODE_MASK (mode);
+
+ /* We can't optimize modes wider than BITS_PER_WORD.
+ ??? We might be able to perform double-word arithmetic if
+ mode == word_mode, however all the cost calculations in
+ synth_mult etc. assume single-word operations. */
+ if (GET_MODE_BITSIZE (wider_mode) > BITS_PER_WORD)
+ return expand_mult_highpart_optab (mode, op0, op1, target,
+ unsignedp, max_cost);
+
+ extra_cost = shift_cost[mode][GET_MODE_BITSIZE (mode) - 1];
+
+ /* Check whether we try to multiply by a negative constant. */
+ if (!unsignedp && ((cnst1 >> (GET_MODE_BITSIZE (mode) - 1)) & 1))
{
- return gen_highpart (mode, tem);
+ sign_adjust = true;
+ extra_cost += add_cost[mode];
}
- else
+
+ /* See whether shift/add multiplication is cheap enough. */
+ if (choose_mult_variant (wider_mode, cnst1, &alg, &variant,
+ max_cost - extra_cost))
{
- tem = expand_shift (RSHIFT_EXPR, wider_mode, tem,
- build_int_2 (size, 0), NULL_RTX, 1);
- return convert_modes (mode, wider_mode, tem, unsignedp);
+ /* See whether the specialized multiplication optabs are
+ cheaper than the shift/add version. */
+ tem = expand_mult_highpart_optab (mode, op0, op1, target,
+ unsignedp, alg.cost + extra_cost);
+ if (tem)
+ return tem;
+
+ tem = convert_to_mode (wider_mode, op0, unsignedp);
+ tem = expand_mult_const (wider_mode, tem, cnst1, 0, &alg, variant);
+ tem = extract_high_half (mode, tem);
+
+ /* Adjust result for signedness. */
+ if (sign_adjust)
+ tem = force_operand (gen_rtx_MINUS (mode, tem, op0), tem);
+
+ return tem;
}
+ return expand_mult_highpart_optab (mode, op0, op1, target,
+ unsignedp, max_cost);
}
\f
/* Emit the code to divide OP0 by OP1, putting the result in TARGET
the result is exact for inputs up to 0x1fffffff.
The input range can be reduced by using cross-sum rules.
For odd divisors >= 3, the following table gives right shift counts
- so that if an number is shifted by an integer multiple of the given
+ so that if a number is shifted by an integer multiple of the given
amount, the remainder stays the same:
2, 4, 3, 6, 10, 12, 4, 8, 18, 6, 11, 20, 18, 0, 5, 10, 12, 0, 12, 20,
14, 12, 23, 21, 8, 0, 20, 18, 0, 0, 6, 12, 0, 22, 0, 18, 20, 30, 0, 0,
#define EXACT_POWER_OF_2_OR_ZERO_P(x) (((x) & ((x) - 1)) == 0)
rtx
-expand_divmod (rem_flag, code, mode, op0, op1, target, unsignedp)
- int rem_flag;
- enum tree_code code;
- enum machine_mode mode;
- rtx op0, op1, target;
- int unsignedp;
+expand_divmod (int rem_flag, enum tree_code code, enum machine_mode mode,
+ rtx op0, rtx op1, rtx target, int unsignedp)
{
enum machine_mode compute_mode;
rtx tquotient;
int size;
rtx insn, set;
optab optab1, optab2;
- int op1_is_constant, op1_is_pow2;
+ int op1_is_constant, op1_is_pow2 = 0;
int max_cost, extra_cost;
static HOST_WIDE_INT last_div_const = 0;
+ static HOST_WIDE_INT ext_op1;
op1_is_constant = GET_CODE (op1) == CONST_INT;
- op1_is_pow2 = (op1_is_constant
- && ((EXACT_POWER_OF_2_OR_ZERO_P (INTVAL (op1))
- || (! unsignedp && EXACT_POWER_OF_2_OR_ZERO_P (-INTVAL (op1))))));
+ if (op1_is_constant)
+ {
+ ext_op1 = INTVAL (op1);
+ if (unsignedp)
+ ext_op1 &= GET_MODE_MASK (mode);
+ op1_is_pow2 = ((EXACT_POWER_OF_2_OR_ZERO_P (ext_op1)
+ || (! unsignedp && EXACT_POWER_OF_2_OR_ZERO_P (-ext_op1))));
+ }
/*
This is the structure of expand_divmod:
if (! unsignedp && op1 == constm1_rtx)
{
if (rem_flag)
- return const0_rtx;
+ return const0_rtx;
return expand_unop (mode, flag_trapv && GET_MODE_CLASS(mode) == MODE_INT
- ? negv_optab : neg_optab, op0, target, 0);
+ ? negv_optab : neg_optab, op0, target, 0);
}
if (target
not straightforward to generalize this. Maybe we should make an array
of possible modes in init_expmed? Save this for GCC 2.7. */
- optab1 = (op1_is_pow2 ? (unsignedp ? lshr_optab : ashr_optab)
+ optab1 = ((op1_is_pow2 && op1 != const0_rtx)
+ ? (unsignedp ? lshr_optab : ashr_optab)
: (unsignedp ? udiv_optab : sdiv_optab));
- optab2 = (op1_is_pow2 ? optab1 : (unsignedp ? udivmod_optab : sdivmod_optab));
+ optab2 = ((op1_is_pow2 && op1 != const0_rtx)
+ ? optab1
+ : (unsignedp ? udivmod_optab : sdivmod_optab));
for (compute_mode = mode; compute_mode != VOIDmode;
compute_mode = GET_MODE_WIDER_MODE (compute_mode))
- if (optab1->handlers[(int) compute_mode].insn_code != CODE_FOR_nothing
- || optab2->handlers[(int) compute_mode].insn_code != CODE_FOR_nothing)
+ if (optab1->handlers[compute_mode].insn_code != CODE_FOR_nothing
+ || optab2->handlers[compute_mode].insn_code != CODE_FOR_nothing)
break;
if (compute_mode == VOIDmode)
for (compute_mode = mode; compute_mode != VOIDmode;
compute_mode = GET_MODE_WIDER_MODE (compute_mode))
- if (optab1->handlers[(int) compute_mode].libfunc
- || optab2->handlers[(int) compute_mode].libfunc)
+ if (optab1->handlers[compute_mode].libfunc
+ || optab2->handlers[compute_mode].libfunc)
break;
/* If we still couldn't find a mode, use MODE, but we'll probably abort
/* Only deduct something for a REM if the last divide done was
for a different constant. Then set the constant of the last
divide. */
- max_cost = div_cost[(int) compute_mode]
+ max_cost = div_cost[compute_mode]
- (rem_flag && ! (last_div_const != 0 && op1_is_constant
&& INTVAL (op1) == last_div_const)
- ? mul_cost[(int) compute_mode] + add_cost : 0);
+ ? mul_cost[compute_mode] + add_cost[compute_mode]
+ : 0);
last_div_const = ! rem_flag && op1_is_constant ? INTVAL (op1) : 0;
unsigned HOST_WIDE_INT mh, ml;
int pre_shift, post_shift;
int dummy;
- unsigned HOST_WIDE_INT d = INTVAL (op1);
+ unsigned HOST_WIDE_INT d = (INTVAL (op1)
+ & GET_MODE_MASK (compute_mode));
if (EXACT_POWER_OF_2_OR_ZERO_P (d))
{
if (post_shift - 1 >= BITS_PER_WORD)
goto fail1;
- extra_cost = (shift_cost[post_shift - 1]
- + shift_cost[1] + 2 * add_cost);
+ extra_cost
+ = (shift_cost[compute_mode][post_shift - 1]
+ + shift_cost[compute_mode][1]
+ + 2 * add_cost[compute_mode]);
t1 = expand_mult_highpart (compute_mode, op0, ml,
NULL_RTX, 1,
max_cost - extra_cost);
t1 = expand_shift (RSHIFT_EXPR, compute_mode, op0,
build_int_2 (pre_shift, 0),
NULL_RTX, 1);
- extra_cost = (shift_cost[pre_shift]
- + shift_cost[post_shift]);
+ extra_cost
+ = (shift_cost[compute_mode][pre_shift]
+ + shift_cost[compute_mode][post_shift]);
t2 = expand_mult_highpart (compute_mode, t1, ml,
NULL_RTX, 1,
max_cost - extra_cost);
if (insn != last
&& (set = single_set (insn)) != 0
&& SET_DEST (set) == quotient)
- set_unique_reg_note (insn,
- REG_EQUAL,
+ set_unique_reg_note (insn,
+ REG_EQUAL,
gen_rtx_UDIV (compute_mode, op0, op1));
}
else /* TRUNC_DIV, signed */
if (rem_flag && d < 0)
{
d = abs_d;
- op1 = GEN_INT (trunc_int_for_mode (abs_d, compute_mode));
+ op1 = gen_int_mode (abs_d, compute_mode);
}
if (d == 1)
goto fail1;
}
else if (EXACT_POWER_OF_2_OR_ZERO_P (d)
- && (rem_flag ? smod_pow2_cheap : sdiv_pow2_cheap)
+ && (rem_flag ? smod_pow2_cheap[compute_mode]
+ : sdiv_pow2_cheap[compute_mode])
/* ??? The cheap metric is computed only for
word_mode. If this operation is wider, this may
not be so. Assume true if the optab has an
expander for this mode. */
&& (((rem_flag ? smod_optab : sdiv_optab)
- ->handlers[(int) compute_mode].insn_code
+ ->handlers[compute_mode].insn_code
!= CODE_FOR_nothing)
- || (sdivmod_optab->handlers[(int) compute_mode]
+ || (sdivmod_optab->handlers[compute_mode]
.insn_code != CODE_FOR_nothing)))
;
else if (EXACT_POWER_OF_2_OR_ZERO_P (abs_d))
t1 = copy_to_mode_reg (compute_mode, op0);
do_cmp_and_jump (t1, const0_rtx, GE,
compute_mode, label);
- expand_inc (t1, GEN_INT (trunc_int_for_mode
- (abs_d - 1, compute_mode)));
+ expand_inc (t1, gen_int_mode (abs_d - 1,
+ compute_mode));
emit_label (label);
quotient = expand_shift (RSHIFT_EXPR, compute_mode, t1,
build_int_2 (lgup, 0),
&& SET_DEST (set) == quotient
&& abs_d < ((unsigned HOST_WIDE_INT) 1
<< (HOST_BITS_PER_WIDE_INT - 1)))
- set_unique_reg_note (insn,
- REG_EQUAL,
+ set_unique_reg_note (insn,
+ REG_EQUAL,
gen_rtx_DIV (compute_mode,
op0,
GEN_INT
|| size - 1 >= BITS_PER_WORD)
goto fail1;
- extra_cost = (shift_cost[post_shift]
- + shift_cost[size - 1] + add_cost);
+ extra_cost = (shift_cost[compute_mode][post_shift]
+ + shift_cost[compute_mode][size - 1]
+ + add_cost[compute_mode]);
t1 = expand_mult_highpart (compute_mode, op0, ml,
NULL_RTX, 0,
max_cost - extra_cost);
goto fail1;
ml |= (~(unsigned HOST_WIDE_INT) 0) << (size - 1);
- extra_cost = (shift_cost[post_shift]
- + shift_cost[size - 1] + 2 * add_cost);
+ extra_cost = (shift_cost[compute_mode][post_shift]
+ + shift_cost[compute_mode][size - 1]
+ + 2 * add_cost[compute_mode]);
t1 = expand_mult_highpart (compute_mode, op0, ml,
NULL_RTX, 0,
max_cost - extra_cost);
if (insn != last
&& (set = single_set (insn)) != 0
&& SET_DEST (set) == quotient)
- set_unique_reg_note (insn,
- REG_EQUAL,
+ set_unique_reg_note (insn,
+ REG_EQUAL,
gen_rtx_DIV (compute_mode, op0, op1));
}
break;
NULL_RTX, 0);
t2 = expand_binop (compute_mode, xor_optab, op0, t1,
NULL_RTX, 0, OPTAB_WIDEN);
- extra_cost = (shift_cost[post_shift]
- + shift_cost[size - 1] + 2 * add_cost);
+ extra_cost = (shift_cost[compute_mode][post_shift]
+ + shift_cost[compute_mode][size - 1]
+ + 2 * add_cost[compute_mode]);
t3 = expand_mult_highpart (compute_mode, t2, ml,
NULL_RTX, 1,
max_cost - extra_cost);
if (rem_flag)
{
remainder
- = GET_CODE (target) == REG ? target : gen_reg_rtx (compute_mode);
+ = REG_P (target) ? target : gen_reg_rtx (compute_mode);
quotient = gen_reg_rtx (compute_mode);
}
else
{
quotient
- = GET_CODE (target) == REG ? target : gen_reg_rtx (compute_mode);
+ = REG_P (target) ? target : gen_reg_rtx (compute_mode);
remainder = gen_reg_rtx (compute_mode);
}
if (rem_flag)
{
- remainder = (GET_CODE (target) == REG
+ remainder = (REG_P (target)
? target : gen_reg_rtx (compute_mode));
quotient = gen_reg_rtx (compute_mode);
}
else
{
- quotient = (GET_CODE (target) == REG
+ quotient = (REG_P (target)
? target : gen_reg_rtx (compute_mode));
remainder = gen_reg_rtx (compute_mode);
}
target = gen_reg_rtx (compute_mode);
if (rem_flag)
{
- remainder= (GET_CODE (target) == REG
+ remainder= (REG_P (target)
? target : gen_reg_rtx (compute_mode));
quotient = gen_reg_rtx (compute_mode);
}
else
{
- quotient = (GET_CODE (target) == REG
+ quotient = (REG_P (target)
? target : gen_reg_rtx (compute_mode));
remainder = gen_reg_rtx (compute_mode);
}
t1 = expand_shift (RSHIFT_EXPR, compute_mode, op0,
build_int_2 (pre_shift, 0), NULL_RTX, unsignedp);
quotient = expand_mult (compute_mode, t1,
- GEN_INT (trunc_int_for_mode
- (ml, compute_mode)),
- NULL_RTX, 0);
+ gen_int_mode (ml, compute_mode),
+ NULL_RTX, 1);
insn = get_last_insn ();
set_unique_reg_note (insn,
- REG_EQUAL,
+ REG_EQUAL,
gen_rtx_fmt_ee (unsignedp ? UDIV : DIV,
compute_mode,
op0, op1));
emit_label (label);
}
return gen_lowpart (mode, rem_flag ? remainder : quotient);
-
+
default:
abort ();
}
{
/* Try to produce the remainder without producing the quotient.
If we seem to have a divmod pattern that does not require widening,
- don't try widening here. We should really have an WIDEN argument
+ don't try widening here. We should really have a WIDEN argument
to expand_twoval_binop, since what we'd really like to do here is
1) try a mod insn in compute_mode
2) try a divmod insn in compute_mode
= sign_expand_binop (compute_mode, umod_optab, smod_optab,
op0, op1, target,
unsignedp,
- ((optab2->handlers[(int) compute_mode].insn_code
+ ((optab2->handlers[compute_mode].insn_code
!= CODE_FOR_nothing)
? OPTAB_DIRECT : OPTAB_WIDEN));
if (remainder == 0)
= sign_expand_binop (compute_mode, udiv_optab, sdiv_optab,
op0, op1, rem_flag ? NULL_RTX : target,
unsignedp,
- ((optab2->handlers[(int) compute_mode].insn_code
+ ((optab2->handlers[compute_mode].insn_code
!= CODE_FOR_nothing)
? OPTAB_DIRECT : OPTAB_WIDEN));
generated by loop.c. */
tree
-make_tree (type, x)
- tree type;
- rtx x;
+make_tree (tree type, rtx x)
{
tree t;
{
case CONST_INT:
t = build_int_2 (INTVAL (x),
- (TREE_UNSIGNED (type)
- && (GET_MODE_BITSIZE (TYPE_MODE (type)) < HOST_BITS_PER_WIDE_INT))
+ (TYPE_UNSIGNED (type)
+ && (GET_MODE_BITSIZE (TYPE_MODE (type))
+ < HOST_BITS_PER_WIDE_INT))
|| INTVAL (x) >= 0 ? 0 : -1);
TREE_TYPE (t) = type;
return t;
}
return t;
-
+
+ case CONST_VECTOR:
+ {
+ int i, units;
+ rtx elt;
+ tree t = NULL_TREE;
+
+ units = CONST_VECTOR_NUNITS (x);
+
+ /* Build a tree with vector elements. */
+ for (i = units - 1; i >= 0; --i)
+ {
+ elt = CONST_VECTOR_ELT (x, i);
+ t = tree_cons (NULL_TREE, make_tree (type, elt), t);
+ }
+
+ return build_vector (type, t);
+ }
+
case PLUS:
return fold (build (PLUS_EXPR, type, make_tree (type, XEXP (x, 0)),
make_tree (type, XEXP (x, 1))));
-
+
case MINUS:
return fold (build (MINUS_EXPR, type, make_tree (type, XEXP (x, 0)),
make_tree (type, XEXP (x, 1))));
-
+
case NEG:
return fold (build1 (NEGATE_EXPR, type, make_tree (type, XEXP (x, 0))));
case MULT:
return fold (build (MULT_EXPR, type, make_tree (type, XEXP (x, 0)),
make_tree (type, XEXP (x, 1))));
-
+
case ASHIFT:
return fold (build (LSHIFT_EXPR, type, make_tree (type, XEXP (x, 0)),
make_tree (type, XEXP (x, 1))));
-
+
case LSHIFTRT:
+ t = lang_hooks.types.unsigned_type (type);
return fold (convert (type,
- build (RSHIFT_EXPR, unsigned_type (type),
- make_tree (unsigned_type (type),
- XEXP (x, 0)),
+ build (RSHIFT_EXPR, t,
+ make_tree (t, XEXP (x, 0)),
make_tree (type, XEXP (x, 1)))));
-
+
case ASHIFTRT:
+ t = lang_hooks.types.signed_type (type);
return fold (convert (type,
- build (RSHIFT_EXPR, signed_type (type),
- make_tree (signed_type (type), XEXP (x, 0)),
+ build (RSHIFT_EXPR, t,
+ make_tree (t, XEXP (x, 0)),
make_tree (type, XEXP (x, 1)))));
-
+
case DIV:
if (TREE_CODE (type) != REAL_TYPE)
- t = signed_type (type);
+ t = lang_hooks.types.signed_type (type);
else
t = type;
make_tree (t, XEXP (x, 0)),
make_tree (t, XEXP (x, 1)))));
case UDIV:
- t = unsigned_type (type);
+ t = lang_hooks.types.unsigned_type (type);
return fold (convert (type,
build (TRUNC_DIV_EXPR, t,
make_tree (t, XEXP (x, 0)),
make_tree (t, XEXP (x, 1)))));
+
+ case SIGN_EXTEND:
+ case ZERO_EXTEND:
+ t = lang_hooks.types.type_for_mode (GET_MODE (XEXP (x, 0)),
+ GET_CODE (x) == ZERO_EXTEND);
+ return fold (convert (type, make_tree (t, XEXP (x, 0))));
+
default:
t = make_node (RTL_EXPR);
TREE_TYPE (t) = type;
-#ifdef POINTERS_EXTEND_UNSIGNED
/* If TYPE is a POINTER_TYPE, X might be Pmode with TYPE_MODE being
ptr_mode. So convert. */
- if (POINTER_TYPE_P (type) && GET_MODE (x) != TYPE_MODE (type))
+ if (POINTER_TYPE_P (type))
x = convert_memory_address (TYPE_MODE (type), x);
-#endif
RTL_EXPR_RTL (t) = x;
/* There are no insns to be output
}
}
+/* Check whether the multiplication X * MULT + ADD overflows.
+ X, MULT and ADD must be CONST_*.
+ MODE is the machine mode for the computation.
+ X and MULT must have mode MODE. ADD may have a different mode.
+ So can X (defaults to same as MODE).
+ UNSIGNEDP is nonzero to do unsigned multiplication. */
+
+bool
+const_mult_add_overflow_p (rtx x, rtx mult, rtx add, enum machine_mode mode, int unsignedp)
+{
+ tree type, mult_type, add_type, result;
+
+ type = lang_hooks.types.type_for_mode (mode, unsignedp);
+
+ /* In order to get a proper overflow indication from an unsigned
+ type, we have to pretend that it's a sizetype. */
+ mult_type = type;
+ if (unsignedp)
+ {
+ mult_type = copy_node (type);
+ TYPE_IS_SIZETYPE (mult_type) = 1;
+ }
+
+ add_type = (GET_MODE (add) == VOIDmode ? mult_type
+ : lang_hooks.types.type_for_mode (GET_MODE (add), unsignedp));
+
+ result = fold (build (PLUS_EXPR, mult_type,
+ fold (build (MULT_EXPR, mult_type,
+ make_tree (mult_type, x),
+ make_tree (mult_type, mult))),
+ make_tree (add_type, add)));
+
+ return TREE_CONSTANT_OVERFLOW (result);
+}
+
/* Return an rtx representing the value of X * MULT + ADD.
TARGET is a suggestion for where to store the result (an rtx).
MODE is the machine mode for the computation.
X and MULT must have mode MODE. ADD may have a different mode.
So can X (defaults to same as MODE).
- UNSIGNEDP is non-zero to do unsigned multiplication.
+ UNSIGNEDP is nonzero to do unsigned multiplication.
This may emit insns. */
rtx
-expand_mult_add (x, target, mult, add, mode, unsignedp)
- rtx x, target, mult, add;
- enum machine_mode mode;
- int unsignedp;
+expand_mult_add (rtx x, rtx target, rtx mult, rtx add, enum machine_mode mode,
+ int unsignedp)
{
- tree type = type_for_mode (mode, unsignedp);
+ tree type = lang_hooks.types.type_for_mode (mode, unsignedp);
tree add_type = (GET_MODE (add) == VOIDmode
- ? type : type_for_mode (GET_MODE (add), unsignedp));
+ ? type: lang_hooks.types.type_for_mode (GET_MODE (add),
+ unsignedp));
tree result = fold (build (PLUS_EXPR, type,
fold (build (MULT_EXPR, type,
make_tree (type, x),
If TARGET is 0, a pseudo-register or constant is returned. */
rtx
-expand_and (op0, op1, target)
- rtx op0, op1, target;
+expand_and (enum machine_mode mode, rtx op0, rtx op1, rtx target)
{
- enum machine_mode mode = VOIDmode;
- rtx tem;
+ rtx tem = 0;
- if (GET_MODE (op0) != VOIDmode)
- mode = GET_MODE (op0);
- else if (GET_MODE (op1) != VOIDmode)
- mode = GET_MODE (op1);
-
- if (mode != VOIDmode)
+ if (GET_MODE (op0) == VOIDmode && GET_MODE (op1) == VOIDmode)
+ tem = simplify_binary_operation (AND, mode, op0, op1);
+ if (tem == 0)
tem = expand_binop (mode, and_optab, op0, op1, target, 0, OPTAB_LIB_WIDEN);
- else if (GET_CODE (op0) == CONST_INT && GET_CODE (op1) == CONST_INT)
- tem = GEN_INT (INTVAL (op0) & INTVAL (op1));
- else
- abort ();
if (target == 0)
target = tem;
Return 0 if that cannot be done.
MODE is the mode to use for OP0 and OP1 should they be CONST_INTs. If
- it is VOIDmode, they cannot both be CONST_INT.
+ it is VOIDmode, they cannot both be CONST_INT.
UNSIGNEDP is for the case where we have to widen the operands
to perform the operation. It says to use zero-extension.
"raw" out of the scc insn. */
rtx
-emit_store_flag (target, code, op0, op1, mode, unsignedp, normalizep)
- rtx target;
- enum rtx_code code;
- rtx op0, op1;
- enum machine_mode mode;
- int unsignedp;
- int normalizep;
+emit_store_flag (rtx target, enum rtx_code code, rtx op0, rtx op1,
+ enum machine_mode mode, int unsignedp, int normalizep)
{
rtx subtarget;
enum insn_code icode;
rtx last = get_last_insn ();
rtx pattern, comparison;
+ /* ??? Ok to do this and then fail? */
+ op0 = protect_from_queue (op0, 0);
+ op1 = protect_from_queue (op1, 0);
+
if (unsignedp)
code = unsigned_condition (code);
if (mode == VOIDmode)
mode = GET_MODE (op0);
- /* For some comparisons with 1 and -1, we can convert this to
+ /* For some comparisons with 1 and -1, we can convert this to
comparisons with zero. This will often produce more opportunities for
store-flag insns. */
the comparison into one involving a single word. */
if (GET_MODE_BITSIZE (mode) == BITS_PER_WORD * 2
&& GET_MODE_CLASS (mode) == MODE_INT
- && op1 == const0_rtx)
+ && op1 == const0_rtx
+ && (GET_CODE (op0) != MEM || ! MEM_VOLATILE_P (op0)))
{
if (code == EQ || code == NE)
{
+ rtx op00, op01, op0both;
+
/* Do a logical OR of the two words and compare the result. */
- rtx op0h = gen_highpart (word_mode, op0);
- rtx op0l = gen_lowpart (word_mode, op0);
- rtx op0both = expand_binop (word_mode, ior_optab, op0h, op0l,
- NULL_RTX, unsignedp, OPTAB_DIRECT);
+ op00 = simplify_gen_subreg (word_mode, op0, mode, 0);
+ op01 = simplify_gen_subreg (word_mode, op0, mode, UNITS_PER_WORD);
+ op0both = expand_binop (word_mode, ior_optab, op00, op01,
+ NULL_RTX, unsignedp, OPTAB_DIRECT);
if (op0both != 0)
return emit_store_flag (target, code, op0both, op1, word_mode,
unsignedp, normalizep);
}
else if (code == LT || code == GE)
- /* If testing the sign bit, can just test on high word. */
- return emit_store_flag (target, code, gen_highpart (word_mode, op0),
- op1, word_mode, unsignedp, normalizep);
+ {
+ rtx op0h;
+
+ /* If testing the sign bit, can just test on high word. */
+ op0h = simplify_gen_subreg (word_mode, op0, mode,
+ subreg_highpart_offset (word_mode, mode));
+ return emit_store_flag (target, code, op0h, op1, word_mode,
+ unsignedp, normalizep);
+ }
}
/* From now on, we won't change CODE, so set ICODE now. */
&& (normalizep || STORE_FLAG_VALUE == 1
|| (GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_WIDE_INT
&& ((STORE_FLAG_VALUE & GET_MODE_MASK (mode))
- == (HOST_WIDE_INT) 1 << (GET_MODE_BITSIZE (mode) - 1)))))
+ == (unsigned HOST_WIDE_INT) 1 << (GET_MODE_BITSIZE (mode) - 1)))))
{
subtarget = target;
comparison
= compare_from_rtx (op0, op1, code, unsignedp, mode, NULL_RTX);
- if (GET_CODE (comparison) == CONST_INT)
- return (comparison == const0_rtx ? const0_rtx
- : normalizep == 1 ? const1_rtx
- : normalizep == -1 ? constm1_rtx
- : const_true_rtx);
+ if (CONSTANT_P (comparison))
+ {
+ if (GET_CODE (comparison) == CONST_INT)
+ {
+ if (comparison == const0_rtx)
+ return const0_rtx;
+ }
+#ifdef FLOAT_STORE_FLAG_VALUE
+ else if (GET_CODE (comparison) == CONST_DOUBLE)
+ {
+ if (comparison == CONST0_RTX (GET_MODE (comparison)))
+ return const0_rtx;
+ }
+#endif
+ else
+ abort ();
+ if (normalizep == 1)
+ return const1_rtx;
+ if (normalizep == -1)
+ return constm1_rtx;
+ return const_true_rtx;
+ }
/* The code of COMPARISON may not match CODE if compare_from_rtx
decided to swap its operands and reverse the original code.
subtarget, normalizep == 1);
else if (STORE_FLAG_VALUE & 1)
{
- op0 = expand_and (op0, const1_rtx, subtarget);
+ op0 = expand_and (compare_mode, op0, const1_rtx, subtarget);
if (normalizep == -1)
op0 = expand_unop (compare_mode, neg_optab, op0, op0, 0);
}
else
abort ();
- /* If we were converting to a smaller mode, do the
+ /* If we were converting to a smaller mode, do the
conversion now. */
if (target_mode != compare_mode)
{
return tem;
}
- /* Some other cases we can do are EQ, NE, LE, and GT comparisons with
+ /* Some other cases we can do are EQ, NE, LE, and GT comparisons with
the constant zero. Reject all other comparisons at this point. Only
do LE and GT if branches are expensive since they are expensive on
2-operand machines. */
tem = expand_binop (mode, sub_optab, tem, op0, subtarget, 0,
OPTAB_WIDEN);
}
-
+
if (code == EQ || code == NE)
{
/* For EQ or NE, one way to do the comparison is to apply an operation
- that converts the operand into a positive number if it is non-zero
+ that converts the operand into a positive number if it is nonzero
or zero if it was originally zero. Then, for EQ, we subtract 1 and
for NE we negate. This puts the result in the sign bit. Then we
- normalize with a shift, if needed.
+ normalize with a shift, if needed.
Two operations that can do the above actions are ABS and FFS, so try
them. If that doesn't work, and MODE is smaller than a full word,
we can use zero-extension to the wider mode (an unsigned conversion)
as the operation. */
- /* Note that ABS doesn't yield a positive number for INT_MIN, but
- that is compensated by the subsequent overflow when subtracting
+ /* Note that ABS doesn't yield a positive number for INT_MIN, but
+ that is compensated by the subsequent overflow when subtracting
one / negating. */
- if (abs_optab->handlers[(int) mode].insn_code != CODE_FOR_nothing)
+ if (abs_optab->handlers[mode].insn_code != CODE_FOR_nothing)
tem = expand_unop (mode, abs_optab, op0, subtarget, 1);
- else if (ffs_optab->handlers[(int) mode].insn_code != CODE_FOR_nothing)
+ else if (ffs_optab->handlers[mode].insn_code != CODE_FOR_nothing)
tem = expand_unop (mode, ffs_optab, op0, subtarget, 1);
else if (GET_MODE_SIZE (mode) < UNITS_PER_WORD)
{
/* Like emit_store_flag, but always succeeds. */
rtx
-emit_store_flag_force (target, code, op0, op1, mode, unsignedp, normalizep)
- rtx target;
- enum rtx_code code;
- rtx op0, op1;
- enum machine_mode mode;
- int unsignedp;
- int normalizep;
+emit_store_flag_force (rtx target, enum rtx_code code, rtx op0, rtx op1,
+ enum machine_mode mode, int unsignedp, int normalizep)
{
rtx tem, label;
/* If this failed, we have to do this with set/compare/jump/set code. */
- if (GET_CODE (target) != REG
+ if (!REG_P (target)
|| reg_mentioned_p (target, op0) || reg_mentioned_p (target, op1))
target = gen_reg_rtx (GET_MODE (target));
be handled if needed). */
static void
-do_cmp_and_jump (arg1, arg2, op, mode, label)
- rtx arg1, arg2, label;
- enum rtx_code op;
- enum machine_mode mode;
+do_cmp_and_jump (rtx arg1, rtx arg2, enum rtx_code op, enum machine_mode mode,
+ rtx label)
{
/* If this mode is an integer too wide to compare properly,
compare word by word. Rely on cse to optimize constant cases. */
OSDN Git Service
