/* Medium-level subroutines: convert bit-field store and extract
and shifts, multiplies and divides to rtl instructions.
Copyright (C) 1987, 1988, 1989, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
- 1999, 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
+ 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
+ Free Software Foundation, Inc.
This file is part of GCC.
GCC is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License as published by the Free
-Software Foundation; either version 2, or (at your option) any later
+Software Foundation; either version 3, or (at your option) any later
version.
GCC is distributed in the hope that it will be useful, but WITHOUT ANY
for more details.
You should have received a copy of the GNU General Public License
-along with GCC; see the file COPYING. If not, write to the Free
-Software Foundation, 59 Temple Place - Suite 330, Boston, MA
-02111-1307, USA. */
+along with GCC; see the file COPYING3. If not see
+<http://www.gnu.org/licenses/>. */
#include "config.h"
#include "real.h"
#include "recog.h"
#include "langhooks.h"
+#include "df.h"
+#include "target.h"
static void store_fixed_bit_field (rtx, unsigned HOST_WIDE_INT,
unsigned HOST_WIDE_INT,
Usually, this will mean that the MD file will emit non-branch
sequences. */
-static bool sdiv_pow2_cheap[NUM_MACHINE_MODES];
-static bool smod_pow2_cheap[NUM_MACHINE_MODES];
+static bool sdiv_pow2_cheap[2][NUM_MACHINE_MODES];
+static bool smod_pow2_cheap[2][NUM_MACHINE_MODES];
#ifndef SLOW_UNALIGNED_ACCESS
#define SLOW_UNALIGNED_ACCESS(MODE, ALIGN) STRICT_ALIGNMENT
/* Cost of various pieces of RTL. Note that some of these are indexed by
shift count and some by mode. */
-static int zero_cost;
-static int add_cost[NUM_MACHINE_MODES];
-static int neg_cost[NUM_MACHINE_MODES];
-static int shift_cost[NUM_MACHINE_MODES][MAX_BITS_PER_WORD];
-static int shiftadd_cost[NUM_MACHINE_MODES][MAX_BITS_PER_WORD];
-static int shiftsub_cost[NUM_MACHINE_MODES][MAX_BITS_PER_WORD];
-static int mul_cost[NUM_MACHINE_MODES];
-static int div_cost[NUM_MACHINE_MODES];
-static int mul_widen_cost[NUM_MACHINE_MODES];
-static int mul_highpart_cost[NUM_MACHINE_MODES];
+static int zero_cost[2];
+static int add_cost[2][NUM_MACHINE_MODES];
+static int neg_cost[2][NUM_MACHINE_MODES];
+static int shift_cost[2][NUM_MACHINE_MODES][MAX_BITS_PER_WORD];
+static int shiftadd_cost[2][NUM_MACHINE_MODES][MAX_BITS_PER_WORD];
+static int shiftsub0_cost[2][NUM_MACHINE_MODES][MAX_BITS_PER_WORD];
+static int shiftsub1_cost[2][NUM_MACHINE_MODES][MAX_BITS_PER_WORD];
+static int mul_cost[2][NUM_MACHINE_MODES];
+static int sdiv_cost[2][NUM_MACHINE_MODES];
+static int udiv_cost[2][NUM_MACHINE_MODES];
+static int mul_widen_cost[2][NUM_MACHINE_MODES];
+static int mul_highpart_cost[2][NUM_MACHINE_MODES];
void
init_expmed (void)
struct rtx_def reg; rtunion reg_fld[2];
struct rtx_def plus; rtunion plus_fld1;
struct rtx_def neg;
- struct rtx_def udiv; rtunion udiv_fld1;
struct rtx_def mult; rtunion mult_fld1;
- struct rtx_def div; rtunion div_fld1;
- struct rtx_def mod; rtunion mod_fld1;
+ struct rtx_def sdiv; rtunion sdiv_fld1;
+ struct rtx_def udiv; rtunion udiv_fld1;
struct rtx_def zext;
+ struct rtx_def sdiv_32; rtunion sdiv_32_fld1;
+ struct rtx_def smod_32; rtunion smod_32_fld1;
struct rtx_def wide_mult; rtunion wide_mult_fld1;
struct rtx_def wide_lshr; rtunion wide_lshr_fld1;
struct rtx_def wide_trunc;
struct rtx_def shift; rtunion shift_fld1;
struct rtx_def shift_mult; rtunion shift_mult_fld1;
struct rtx_def shift_add; rtunion shift_add_fld1;
- struct rtx_def shift_sub; rtunion shift_sub_fld1;
+ struct rtx_def shift_sub0; rtunion shift_sub0_fld1;
+ struct rtx_def shift_sub1; rtunion shift_sub1_fld1;
} all;
rtx pow2[MAX_BITS_PER_WORD];
rtx cint[MAX_BITS_PER_WORD];
int m, n;
enum machine_mode mode, wider_mode;
+ int speed;
- zero_cost = rtx_cost (const0_rtx, 0);
for (m = 1; m < MAX_BITS_PER_WORD; m++)
{
pow2[m] = GEN_INT ((HOST_WIDE_INT) 1 << m);
cint[m] = GEN_INT (m);
}
-
memset (&all, 0, sizeof all);
PUT_CODE (&all.reg, REG);
/* Avoid using hard regs in ways which may be unsupported. */
- REGNO (&all.reg) = LAST_VIRTUAL_REGISTER + 1;
+ SET_REGNO (&all.reg, LAST_VIRTUAL_REGISTER + 1);
PUT_CODE (&all.plus, PLUS);
XEXP (&all.plus, 0) = &all.reg;
PUT_CODE (&all.neg, NEG);
XEXP (&all.neg, 0) = &all.reg;
- PUT_CODE (&all.udiv, UDIV);
- XEXP (&all.udiv, 0) = &all.reg;
- XEXP (&all.udiv, 1) = &all.reg;
-
PUT_CODE (&all.mult, MULT);
XEXP (&all.mult, 0) = &all.reg;
XEXP (&all.mult, 1) = &all.reg;
- PUT_CODE (&all.div, DIV);
- XEXP (&all.div, 0) = &all.reg;
- XEXP (&all.div, 1) = 32 < MAX_BITS_PER_WORD ? cint[32] : GEN_INT (32);
+ PUT_CODE (&all.sdiv, DIV);
+ XEXP (&all.sdiv, 0) = &all.reg;
+ XEXP (&all.sdiv, 1) = &all.reg;
- PUT_CODE (&all.mod, MOD);
- XEXP (&all.mod, 0) = &all.reg;
- XEXP (&all.mod, 1) = XEXP (&all.div, 1);
+ PUT_CODE (&all.udiv, UDIV);
+ XEXP (&all.udiv, 0) = &all.reg;
+ XEXP (&all.udiv, 1) = &all.reg;
+
+ PUT_CODE (&all.sdiv_32, DIV);
+ XEXP (&all.sdiv_32, 0) = &all.reg;
+ XEXP (&all.sdiv_32, 1) = 32 < MAX_BITS_PER_WORD ? cint[32] : GEN_INT (32);
+
+ PUT_CODE (&all.smod_32, MOD);
+ XEXP (&all.smod_32, 0) = &all.reg;
+ XEXP (&all.smod_32, 1) = XEXP (&all.sdiv_32, 1);
PUT_CODE (&all.zext, ZERO_EXTEND);
XEXP (&all.zext, 0) = &all.reg;
XEXP (&all.shift_add, 0) = &all.shift_mult;
XEXP (&all.shift_add, 1) = &all.reg;
- PUT_CODE (&all.shift_sub, MINUS);
- XEXP (&all.shift_sub, 0) = &all.shift_mult;
- XEXP (&all.shift_sub, 1) = &all.reg;
+ PUT_CODE (&all.shift_sub0, MINUS);
+ XEXP (&all.shift_sub0, 0) = &all.shift_mult;
+ XEXP (&all.shift_sub0, 1) = &all.reg;
- for (mode = GET_CLASS_NARROWEST_MODE (MODE_INT);
- mode != VOIDmode;
- mode = GET_MODE_WIDER_MODE (mode))
+ PUT_CODE (&all.shift_sub1, MINUS);
+ XEXP (&all.shift_sub1, 0) = &all.reg;
+ XEXP (&all.shift_sub1, 1) = &all.shift_mult;
+
+ for (speed = 0; speed < 2; speed++)
{
- PUT_MODE (&all.reg, mode);
- PUT_MODE (&all.plus, mode);
- PUT_MODE (&all.neg, mode);
- PUT_MODE (&all.udiv, mode);
- PUT_MODE (&all.mult, mode);
- PUT_MODE (&all.div, mode);
- PUT_MODE (&all.mod, mode);
- PUT_MODE (&all.wide_trunc, mode);
- PUT_MODE (&all.shift, mode);
- PUT_MODE (&all.shift_mult, mode);
- PUT_MODE (&all.shift_add, mode);
- PUT_MODE (&all.shift_sub, mode);
-
- add_cost[mode] = rtx_cost (&all.plus, SET);
- neg_cost[mode] = rtx_cost (&all.neg, SET);
- div_cost[mode] = rtx_cost (&all.udiv, SET);
- mul_cost[mode] = rtx_cost (&all.mult, SET);
-
- sdiv_pow2_cheap[mode] = (rtx_cost (&all.div, SET) <= 2 * add_cost[mode]);
- smod_pow2_cheap[mode] = (rtx_cost (&all.mod, SET) <= 4 * add_cost[mode]);
-
- wider_mode = GET_MODE_WIDER_MODE (mode);
- if (wider_mode != VOIDmode)
- {
- PUT_MODE (&all.zext, wider_mode);
- PUT_MODE (&all.wide_mult, wider_mode);
- PUT_MODE (&all.wide_lshr, wider_mode);
- XEXP (&all.wide_lshr, 1) = GEN_INT (GET_MODE_BITSIZE (mode));
+ crtl->maybe_hot_insn_p = speed;
+ zero_cost[speed] = rtx_cost (const0_rtx, SET, speed);
- mul_widen_cost[wider_mode] = rtx_cost (&all.wide_mult, SET);
- mul_highpart_cost[mode] = rtx_cost (&all.wide_trunc, SET);
- }
+ for (mode = GET_CLASS_NARROWEST_MODE (MODE_INT);
+ mode != VOIDmode;
+ mode = GET_MODE_WIDER_MODE (mode))
+ {
+ PUT_MODE (&all.reg, mode);
+ PUT_MODE (&all.plus, mode);
+ PUT_MODE (&all.neg, mode);
+ PUT_MODE (&all.mult, mode);
+ PUT_MODE (&all.sdiv, mode);
+ PUT_MODE (&all.udiv, mode);
+ PUT_MODE (&all.sdiv_32, mode);
+ PUT_MODE (&all.smod_32, mode);
+ PUT_MODE (&all.wide_trunc, mode);
+ PUT_MODE (&all.shift, mode);
+ PUT_MODE (&all.shift_mult, mode);
+ PUT_MODE (&all.shift_add, mode);
+ PUT_MODE (&all.shift_sub0, mode);
+ PUT_MODE (&all.shift_sub1, mode);
+
+ add_cost[speed][mode] = rtx_cost (&all.plus, SET, speed);
+ neg_cost[speed][mode] = rtx_cost (&all.neg, SET, speed);
+ mul_cost[speed][mode] = rtx_cost (&all.mult, SET, speed);
+ sdiv_cost[speed][mode] = rtx_cost (&all.sdiv, SET, speed);
+ udiv_cost[speed][mode] = rtx_cost (&all.udiv, SET, speed);
+
+ sdiv_pow2_cheap[speed][mode] = (rtx_cost (&all.sdiv_32, SET, speed)
+ <= 2 * add_cost[speed][mode]);
+ smod_pow2_cheap[speed][mode] = (rtx_cost (&all.smod_32, SET, speed)
+ <= 4 * add_cost[speed][mode]);
+
+ wider_mode = GET_MODE_WIDER_MODE (mode);
+ if (wider_mode != VOIDmode)
+ {
+ PUT_MODE (&all.zext, wider_mode);
+ PUT_MODE (&all.wide_mult, wider_mode);
+ PUT_MODE (&all.wide_lshr, wider_mode);
+ XEXP (&all.wide_lshr, 1) = GEN_INT (GET_MODE_BITSIZE (mode));
+
+ mul_widen_cost[speed][wider_mode]
+ = rtx_cost (&all.wide_mult, SET, speed);
+ mul_highpart_cost[speed][mode]
+ = rtx_cost (&all.wide_trunc, SET, speed);
+ }
- shift_cost[mode][0] = 0;
- shiftadd_cost[mode][0] = shiftsub_cost[mode][0] = add_cost[mode];
+ shift_cost[speed][mode][0] = 0;
+ shiftadd_cost[speed][mode][0] = shiftsub0_cost[speed][mode][0]
+ = shiftsub1_cost[speed][mode][0] = add_cost[speed][mode];
- n = MIN (MAX_BITS_PER_WORD, GET_MODE_BITSIZE (mode));
- for (m = 1; m < n; m++)
- {
- XEXP (&all.shift, 1) = cint[m];
- XEXP (&all.shift_mult, 1) = pow2[m];
+ n = MIN (MAX_BITS_PER_WORD, GET_MODE_BITSIZE (mode));
+ for (m = 1; m < n; m++)
+ {
+ XEXP (&all.shift, 1) = cint[m];
+ XEXP (&all.shift_mult, 1) = pow2[m];
- shift_cost[mode][m] = rtx_cost (&all.shift, SET);
- shiftadd_cost[mode][m] = rtx_cost (&all.shift_add, SET);
- shiftsub_cost[mode][m] = rtx_cost (&all.shift_sub, SET);
+ shift_cost[speed][mode][m] = rtx_cost (&all.shift, SET, speed);
+ shiftadd_cost[speed][mode][m] = rtx_cost (&all.shift_add, SET, speed);
+ shiftsub0_cost[speed][mode][m] = rtx_cost (&all.shift_sub0, SET, speed);
+ shiftsub1_cost[speed][mode][m] = rtx_cost (&all.shift_sub1, SET, speed);
+ }
}
}
+ default_rtl_profile ();
}
/* Return an rtx representing minus the value of X.
return data->operand[opno].mode;
}
-\f
-/* Generate code to store value from rtx VALUE
- into a bit-field within structure STR_RTX
- containing BITSIZE bits starting at bit BITNUM.
- FIELDMODE is the machine-mode of the FIELD_DECL node for this field.
- ALIGN is the alignment that STR_RTX is known to have.
- TOTAL_SIZE is the size of the structure in bytes, or -1 if varying. */
+/* Return true if X, of mode MODE, matches the predicate for operand
+ OPNO of instruction ICODE. Allow volatile memories, regardless of
+ the ambient volatile_ok setting. */
-/* ??? Note that there are two different ideas here for how
- to determine the size to count bits within, for a register.
- One is BITS_PER_WORD, and the other is the size of operand 3
- of the insv pattern.
+static bool
+check_predicate_volatile_ok (enum insn_code icode, int opno,
+ rtx x, enum machine_mode mode)
+{
+ bool save_volatile_ok, result;
- If operand 3 of the insv pattern is VOIDmode, then we will use BITS_PER_WORD
- else, we use the mode of operand 3. */
+ save_volatile_ok = volatile_ok;
+ result = insn_data[(int) icode].operand[opno].predicate (x, mode);
+ volatile_ok = save_volatile_ok;
+ return result;
+}
+\f
+/* A subroutine of store_bit_field, with the same arguments. Return true
+ if the operation could be implemented.
-rtx
-store_bit_field (rtx str_rtx, unsigned HOST_WIDE_INT bitsize,
- unsigned HOST_WIDE_INT bitnum, enum machine_mode fieldmode,
- rtx value)
+ If FALLBACK_P is true, fall back to store_fixed_bit_field if we have
+ no other way of implementing the operation. If FALLBACK_P is false,
+ return false instead. */
+
+static bool
+store_bit_field_1 (rtx str_rtx, unsigned HOST_WIDE_INT bitsize,
+ unsigned HOST_WIDE_INT bitnum, enum machine_mode fieldmode,
+ rtx value, bool fallback_p)
{
unsigned int unit
= (MEM_P (str_rtx)) ? BITS_PER_UNIT : BITS_PER_WORD;
meaningful at a much higher level; when structures are copied
between memory and regs, the higher-numbered regs
always get higher addresses. */
- bitnum += SUBREG_BYTE (op0) * BITS_PER_UNIT;
+ int inner_mode_size = GET_MODE_SIZE (GET_MODE (SUBREG_REG (op0)));
+ int outer_mode_size = GET_MODE_SIZE (GET_MODE (op0));
+
+ byte_offset = 0;
+
+ /* Paradoxical subregs need special handling on big endian machines. */
+ if (SUBREG_BYTE (op0) == 0 && inner_mode_size < outer_mode_size)
+ {
+ int difference = inner_mode_size - outer_mode_size;
+
+ if (WORDS_BIG_ENDIAN)
+ byte_offset += (difference / UNITS_PER_WORD) * UNITS_PER_WORD;
+ if (BYTES_BIG_ENDIAN)
+ byte_offset += difference % UNITS_PER_WORD;
+ }
+ else
+ byte_offset = SUBREG_BYTE (op0);
+
+ bitnum += byte_offset * BITS_PER_UNIT;
op0 = SUBREG_REG (op0);
}
lies completely outside that register. This can occur if the source
code contains an out-of-bounds access to a small array. */
if (REG_P (op0) && bitnum >= GET_MODE_BITSIZE (GET_MODE (op0)))
- return value;
+ return true;
/* Use vec_set patterns for inserting parts of vectors whenever
available. */
if (VECTOR_MODE_P (GET_MODE (op0))
&& !MEM_P (op0)
- && (vec_set_optab->handlers[GET_MODE (op0)].insn_code
+ && (optab_handler (vec_set_optab, GET_MODE (op0))->insn_code
!= CODE_FOR_nothing)
&& fieldmode == GET_MODE_INNER (GET_MODE (op0))
&& bitsize == GET_MODE_BITSIZE (GET_MODE_INNER (GET_MODE (op0)))
{
enum machine_mode outermode = GET_MODE (op0);
enum machine_mode innermode = GET_MODE_INNER (outermode);
- int icode = (int) vec_set_optab->handlers[outermode].insn_code;
+ int icode = (int) optab_handler (vec_set_optab, outermode)->insn_code;
int pos = bitnum / GET_MODE_BITSIZE (innermode);
rtx rtxpos = GEN_INT (pos);
rtx src = value;
{
emit_insn (seq);
emit_insn (pat);
- return dest;
+ return true;
}
}
- if (flag_force_mem)
- {
- int old_generating_concat_p = generating_concat_p;
- generating_concat_p = 0;
- value = force_not_mem (value);
- generating_concat_p = old_generating_concat_p;
- }
-
/* If the target is a register, overwriting the entire object, or storing
a full-word or multi-word field can be done with just a SUBREG.
|| (offset * BITS_PER_UNIT % bitsize == 0
&& MEM_ALIGN (op0) % GET_MODE_BITSIZE (fieldmode) == 0))))
{
- if (GET_MODE (op0) != fieldmode)
- {
- if (MEM_P (op0))
- op0 = adjust_address (op0, fieldmode, offset);
- else
- op0 = simplify_gen_subreg (fieldmode, op0, GET_MODE (op0),
- byte_offset);
- }
+ if (MEM_P (op0))
+ op0 = adjust_address (op0, fieldmode, offset);
+ else if (GET_MODE (op0) != fieldmode)
+ op0 = simplify_gen_subreg (fieldmode, op0, GET_MODE (op0),
+ byte_offset);
emit_move_insn (op0, value);
- return value;
+ return true;
}
/* Make sure we are playing with integral modes. Pun with subregs
if (!MEM_P (op0)
&& (BYTES_BIG_ENDIAN ? bitpos + bitsize == unit : bitpos == 0)
&& bitsize == GET_MODE_BITSIZE (fieldmode)
- && (movstrict_optab->handlers[fieldmode].insn_code
+ && (optab_handler (movstrict_optab, fieldmode)->insn_code
!= CODE_FOR_nothing))
{
- int icode = movstrict_optab->handlers[fieldmode].insn_code;
+ int icode = optab_handler (movstrict_optab, fieldmode)->insn_code;
+ rtx insn;
+ rtx start = get_last_insn ();
+ rtx arg0 = op0;
/* Get appropriate low part of the value being stored. */
- if (GET_CODE (value) == CONST_INT || REG_P (value))
+ if (CONST_INT_P (value) || REG_P (value))
value = gen_lowpart (fieldmode, value);
else if (!(GET_CODE (value) == SYMBOL_REF
|| GET_CODE (value) == LABEL_REF
gcc_assert (GET_MODE (SUBREG_REG (op0)) == fieldmode
|| GET_MODE_CLASS (fieldmode) == MODE_INT
|| GET_MODE_CLASS (fieldmode) == MODE_PARTIAL_INT);
- op0 = SUBREG_REG (op0);
+ arg0 = SUBREG_REG (op0);
}
- emit_insn (GEN_FCN (icode)
- (gen_rtx_SUBREG (fieldmode, op0,
+ insn = (GEN_FCN (icode)
+ (gen_rtx_SUBREG (fieldmode, arg0,
(bitnum % BITS_PER_WORD) / BITS_PER_UNIT
+ (offset * UNITS_PER_WORD)),
value));
-
- return value;
+ if (insn)
+ {
+ emit_insn (insn);
+ return true;
+ }
+ delete_insns_since (start);
}
/* Handle fields bigger than a word. */
unsigned int backwards = WORDS_BIG_ENDIAN && fieldmode != BLKmode;
unsigned int nwords = (bitsize + (BITS_PER_WORD - 1)) / BITS_PER_WORD;
unsigned int i;
+ rtx last;
/* This is the mode we must force value to, so that there will be enough
subwords to extract. Note that fieldmode will often (always?) be
VOIDmode, because that is what store_field uses to indicate that this
- is a bit field, but passing VOIDmode to operand_subword_force will
- result in an abort. */
+ is a bit field, but passing VOIDmode to operand_subword_force
+ is not allowed. */
fieldmode = GET_MODE (value);
if (fieldmode == VOIDmode)
fieldmode = smallest_mode_for_size (nwords * BITS_PER_WORD, MODE_INT);
+ last = get_last_insn ();
for (i = 0; i < nwords; i++)
{
/* If I is 0, use the low-order word in both field and target;
* BITS_PER_WORD,
0)
: (int) i * BITS_PER_WORD);
+ rtx value_word = operand_subword_force (value, wordnum, fieldmode);
- store_bit_field (op0, MIN (BITS_PER_WORD,
- bitsize - i * BITS_PER_WORD),
- bitnum + bit_offset, word_mode,
- operand_subword_force (value, wordnum, fieldmode));
+ if (!store_bit_field_1 (op0, MIN (BITS_PER_WORD,
+ bitsize - i * BITS_PER_WORD),
+ bitnum + bit_offset, word_mode,
+ value_word, fallback_p))
+ {
+ delete_insns_since (last);
+ return false;
+ }
}
- return value;
+ return true;
}
/* From here on we can assume that the field to be stored in is
{
if (!REG_P (op0))
{
- /* Since this is a destination (lvalue), we can't copy it to a
- pseudo. We can trivially remove a SUBREG that does not
- change the size of the operand. Such a SUBREG may have been
- added above. Otherwise, abort. */
+ /* Since this is a destination (lvalue), we can't copy
+ it to a pseudo. We can remove a SUBREG that does not
+ change the size of the operand. Such a SUBREG may
+ have been added above. */
gcc_assert (GET_CODE (op0) == SUBREG
&& (GET_MODE_SIZE (GET_MODE (op0))
== GET_MODE_SIZE (GET_MODE (SUBREG_REG (op0)))));
if (HAVE_insv
&& GET_MODE (value) != BLKmode
- && !(bitsize == 1 && GET_CODE (value) == CONST_INT)
- /* Ensure insv's size is wide enough for this field. */
- && (GET_MODE_BITSIZE (op_mode) >= bitsize)
+ && bitsize > 0
+ && GET_MODE_BITSIZE (op_mode) >= bitsize
&& ! ((REG_P (op0) || GET_CODE (op0) == SUBREG)
- && (bitsize + bitpos > GET_MODE_BITSIZE (op_mode))))
+ && (bitsize + bitpos > GET_MODE_BITSIZE (op_mode)))
+ && insn_data[CODE_FOR_insv].operand[1].predicate (GEN_INT (bitsize),
+ VOIDmode)
+ && check_predicate_volatile_ok (CODE_FOR_insv, 0, op0, VOIDmode))
{
int xbitpos = bitpos;
rtx value1;
rtx xop0 = op0;
rtx last = get_last_insn ();
rtx pat;
- enum machine_mode maxmode = mode_for_extraction (EP_insv, 3);
- int save_volatile_ok = volatile_ok;
-
- volatile_ok = 1;
-
- /* If this machine's insv can only insert into a register, copy OP0
- into a register and save it back later. */
- /* This used to check flag_force_mem, but that was a serious
- de-optimization now that flag_force_mem is enabled by -O2. */
- if (MEM_P (op0)
- && ! ((*insn_data[(int) CODE_FOR_insv].operand[0].predicate)
- (op0, VOIDmode)))
- {
- rtx tempreg;
- enum machine_mode bestmode;
-
- /* Get the mode to use for inserting into this field. If OP0 is
- BLKmode, get the smallest mode consistent with the alignment. If
- OP0 is a non-BLKmode object that is no wider than MAXMODE, use its
- mode. Otherwise, use the smallest mode containing the field. */
-
- if (GET_MODE (op0) == BLKmode
- || GET_MODE_SIZE (GET_MODE (op0)) > GET_MODE_SIZE (maxmode))
- bestmode
- = get_best_mode (bitsize, bitnum, MEM_ALIGN (op0), maxmode,
- MEM_VOLATILE_P (op0));
- else
- bestmode = GET_MODE (op0);
-
- if (bestmode == VOIDmode
- || (SLOW_UNALIGNED_ACCESS (bestmode, MEM_ALIGN (op0))
- && GET_MODE_BITSIZE (bestmode) > MEM_ALIGN (op0)))
- goto insv_loses;
-
- /* Adjust address to point to the containing unit of that mode.
- Compute offset as multiple of this unit, counting in bytes. */
- unit = GET_MODE_BITSIZE (bestmode);
- offset = (bitnum / unit) * GET_MODE_SIZE (bestmode);
- bitpos = bitnum % unit;
- op0 = adjust_address (op0, bestmode, offset);
-
- /* Fetch that unit, store the bitfield in it, then store
- the unit. */
- tempreg = copy_to_reg (op0);
- store_bit_field (tempreg, bitsize, bitpos, fieldmode, orig_value);
- emit_move_insn (op0, tempreg);
- return value;
- }
- volatile_ok = save_volatile_ok;
+ bool copy_back = false;
/* Add OFFSET into OP0's address. */
if (MEM_P (xop0))
xop0 = adjust_address (xop0, byte_mode, offset);
- /* If xop0 is a register, we need it in MAXMODE
+ /* If xop0 is a register, we need it in OP_MODE
to make it acceptable to the format of insv. */
if (GET_CODE (xop0) == SUBREG)
/* We can't just change the mode, because this might clobber op0,
and we will need the original value of op0 if insv fails. */
- xop0 = gen_rtx_SUBREG (maxmode, SUBREG_REG (xop0), SUBREG_BYTE (xop0));
- if (REG_P (xop0) && GET_MODE (xop0) != maxmode)
- xop0 = gen_rtx_SUBREG (maxmode, xop0, 0);
+ xop0 = gen_rtx_SUBREG (op_mode, SUBREG_REG (xop0), SUBREG_BYTE (xop0));
+ if (REG_P (xop0) && GET_MODE (xop0) != op_mode)
+ xop0 = gen_lowpart_SUBREG (op_mode, xop0);
+
+ /* If the destination is a paradoxical subreg such that we need a
+ truncate to the inner mode, perform the insertion on a temporary and
+ truncate the result to the original destination. Note that we can't
+ just truncate the paradoxical subreg as (truncate:N (subreg:W (reg:N
+ X) 0)) is (reg:N X). */
+ if (GET_CODE (xop0) == SUBREG
+ && REG_P (SUBREG_REG (xop0))
+ && (!TRULY_NOOP_TRUNCATION
+ (GET_MODE_BITSIZE (GET_MODE (SUBREG_REG (xop0))),
+ GET_MODE_BITSIZE (op_mode))))
+ {
+ rtx tem = gen_reg_rtx (op_mode);
+ emit_move_insn (tem, xop0);
+ xop0 = tem;
+ copy_back = true;
+ }
/* On big-endian machines, we count bits from the most significant.
If the bit field insn does not, we must invert. */
/* We have been counting XBITPOS within UNIT.
Count instead within the size of the register. */
if (BITS_BIG_ENDIAN && !MEM_P (xop0))
- xbitpos += GET_MODE_BITSIZE (maxmode) - unit;
+ xbitpos += GET_MODE_BITSIZE (op_mode) - unit;
- unit = GET_MODE_BITSIZE (maxmode);
+ unit = GET_MODE_BITSIZE (op_mode);
- /* Convert VALUE to maxmode (which insv insn wants) in VALUE1. */
+ /* Convert VALUE to op_mode (which insv insn wants) in VALUE1. */
value1 = value;
- if (GET_MODE (value) != maxmode)
+ if (GET_MODE (value) != op_mode)
{
if (GET_MODE_BITSIZE (GET_MODE (value)) >= bitsize)
{
if it has all the bits we will actually use. However,
if we must narrow it, be sure we do it correctly. */
- if (GET_MODE_SIZE (GET_MODE (value)) < GET_MODE_SIZE (maxmode))
+ if (GET_MODE_SIZE (GET_MODE (value)) < GET_MODE_SIZE (op_mode))
{
rtx tmp;
- tmp = simplify_subreg (maxmode, value1, GET_MODE (value), 0);
+ tmp = simplify_subreg (op_mode, value1, GET_MODE (value), 0);
if (! tmp)
- tmp = simplify_gen_subreg (maxmode,
+ tmp = simplify_gen_subreg (op_mode,
force_reg (GET_MODE (value),
value1),
GET_MODE (value), 0);
value1 = tmp;
}
else
- value1 = gen_lowpart (maxmode, value1);
+ value1 = gen_lowpart (op_mode, value1);
}
- else if (GET_CODE (value) == CONST_INT)
- value1 = gen_int_mode (INTVAL (value), maxmode);
+ else if (CONST_INT_P (value))
+ value1 = gen_int_mode (INTVAL (value), op_mode);
else
/* Parse phase is supposed to make VALUE's data type
match that of the component reference, which is a type
/* If this machine's insv insists on a register,
get VALUE1 into a register. */
if (! ((*insn_data[(int) CODE_FOR_insv].operand[3].predicate)
- (value1, maxmode)))
- value1 = force_reg (maxmode, value1);
+ (value1, op_mode)))
+ value1 = force_reg (op_mode, value1);
pat = gen_insv (xop0, GEN_INT (bitsize), GEN_INT (xbitpos), value1);
if (pat)
- emit_insn (pat);
+ {
+ emit_insn (pat);
+
+ if (copy_back)
+ convert_move (op0, xop0, true);
+ return true;
+ }
+ delete_insns_since (last);
+ }
+
+ /* If OP0 is a memory, try copying it to a register and seeing if a
+ cheap register alternative is available. */
+ if (HAVE_insv && MEM_P (op0))
+ {
+ enum machine_mode bestmode;
+
+ /* Get the mode to use for inserting into this field. If OP0 is
+ BLKmode, get the smallest mode consistent with the alignment. If
+ OP0 is a non-BLKmode object that is no wider than OP_MODE, use its
+ mode. Otherwise, use the smallest mode containing the field. */
+
+ if (GET_MODE (op0) == BLKmode
+ || (op_mode != MAX_MACHINE_MODE
+ && GET_MODE_SIZE (GET_MODE (op0)) > GET_MODE_SIZE (op_mode)))
+ bestmode = get_best_mode (bitsize, bitnum, MEM_ALIGN (op0),
+ (op_mode == MAX_MACHINE_MODE
+ ? VOIDmode : op_mode),
+ MEM_VOLATILE_P (op0));
else
+ bestmode = GET_MODE (op0);
+
+ if (bestmode != VOIDmode
+ && GET_MODE_SIZE (bestmode) >= GET_MODE_SIZE (fieldmode)
+ && !(SLOW_UNALIGNED_ACCESS (bestmode, MEM_ALIGN (op0))
+ && GET_MODE_BITSIZE (bestmode) > MEM_ALIGN (op0)))
{
+ rtx last, tempreg, xop0;
+ unsigned HOST_WIDE_INT xoffset, xbitpos;
+
+ last = get_last_insn ();
+
+ /* Adjust address to point to the containing unit of
+ that mode. Compute the offset as a multiple of this unit,
+ counting in bytes. */
+ unit = GET_MODE_BITSIZE (bestmode);
+ xoffset = (bitnum / unit) * GET_MODE_SIZE (bestmode);
+ xbitpos = bitnum % unit;
+ xop0 = adjust_address (op0, bestmode, xoffset);
+
+ /* Fetch that unit, store the bitfield in it, then store
+ the unit. */
+ tempreg = copy_to_reg (xop0);
+ if (store_bit_field_1 (tempreg, bitsize, xbitpos,
+ fieldmode, orig_value, false))
+ {
+ emit_move_insn (xop0, tempreg);
+ return true;
+ }
delete_insns_since (last);
- store_fixed_bit_field (op0, offset, bitsize, bitpos, value);
}
}
- else
- insv_loses:
- /* Insv is not available; store using shifts and boolean ops. */
- store_fixed_bit_field (op0, offset, bitsize, bitpos, value);
- return value;
+
+ if (!fallback_p)
+ return false;
+
+ store_fixed_bit_field (op0, offset, bitsize, bitpos, value);
+ return true;
+}
+
+/* Generate code to store value from rtx VALUE
+ into a bit-field within structure STR_RTX
+ containing BITSIZE bits starting at bit BITNUM.
+ FIELDMODE is the machine-mode of the FIELD_DECL node for this field. */
+
+void
+store_bit_field (rtx str_rtx, unsigned HOST_WIDE_INT bitsize,
+ unsigned HOST_WIDE_INT bitnum, enum machine_mode fieldmode,
+ rtx value)
+{
+ if (!store_bit_field_1 (str_rtx, bitsize, bitnum, fieldmode, value, true))
+ gcc_unreachable ();
}
\f
/* Use shifts and boolean operations to store VALUE
{
enum machine_mode mode;
unsigned int total_bits = BITS_PER_WORD;
- rtx subtarget, temp;
+ rtx temp;
int all_zero = 0;
int all_one = 0;
/* Shift VALUE left by BITPOS bits. If VALUE is not constant,
we must first convert its mode to MODE. */
- if (GET_CODE (value) == CONST_INT)
+ if (CONST_INT_P (value))
{
HOST_WIDE_INT v = INTVAL (value);
&& bitpos + bitsize != GET_MODE_BITSIZE (mode));
if (GET_MODE (value) != mode)
- {
- if ((REG_P (value) || GET_CODE (value) == SUBREG)
- && GET_MODE_SIZE (mode) < GET_MODE_SIZE (GET_MODE (value)))
- value = gen_lowpart (mode, value);
- else
- value = convert_to_mode (mode, value, 1);
- }
+ value = convert_to_mode (mode, value, 1);
if (must_and)
value = expand_binop (mode, and_optab, value,
/* Now clear the chosen bits in OP0,
except that if VALUE is -1 we need not bother. */
+ /* We keep the intermediates in registers to allow CSE to combine
+ consecutive bitfield assignments. */
- subtarget = (REG_P (op0) || ! flag_force_mem) ? op0 : 0;
+ temp = force_reg (mode, op0);
if (! all_one)
{
- temp = expand_binop (mode, and_optab, op0,
+ temp = expand_binop (mode, and_optab, temp,
mask_rtx (mode, bitpos, bitsize, 1),
- subtarget, 1, OPTAB_LIB_WIDEN);
- subtarget = temp;
+ NULL_RTX, 1, OPTAB_LIB_WIDEN);
+ temp = force_reg (mode, temp);
}
- else
- temp = op0;
/* Now logical-or VALUE into OP0, unless it is zero. */
if (! all_zero)
- temp = expand_binop (mode, ior_optab, temp, value,
- subtarget, 1, OPTAB_LIB_WIDEN);
+ {
+ temp = expand_binop (mode, ior_optab, temp, value,
+ NULL_RTX, 1, OPTAB_LIB_WIDEN);
+ temp = force_reg (mode, temp);
+ }
+
if (op0 != temp)
- emit_move_insn (op0, temp);
+ {
+ op0 = copy_rtx (op0);
+ emit_move_insn (op0, temp);
+ }
}
\f
/* Store a bit field that is split across multiple accessible memory objects.
/* If VALUE is a constant other than a CONST_INT, get it into a register in
WORD_MODE. If we can do this using gen_lowpart_common, do so. Note
that VALUE might be a floating-point constant. */
- if (CONSTANT_P (value) && GET_CODE (value) != CONST_INT)
+ if (CONSTANT_P (value) && !CONST_INT_P (value))
{
rtx word = gen_lowpart_common (word_mode, value);
total_bits = GET_MODE_BITSIZE (GET_MODE (value));
/* Fetch successively less significant portions. */
- if (GET_CODE (value) == CONST_INT)
+ if (CONST_INT_P (value))
part = GEN_INT (((unsigned HOST_WIDE_INT) (INTVAL (value))
>> (bitsize - bitsdone - thissize))
& (((HOST_WIDE_INT) 1 << thissize) - 1));
else
{
/* Fetch successively more significant portions. */
- if (GET_CODE (value) == CONST_INT)
+ if (CONST_INT_P (value))
part = GEN_INT (((unsigned HOST_WIDE_INT) (INTVAL (value))
>> bitsdone)
& (((HOST_WIDE_INT) 1 << thissize) - 1));
}
}
\f
-/* Generate code to extract a byte-field from STR_RTX
- containing BITSIZE bits, starting at BITNUM,
- and put it in TARGET if possible (if TARGET is nonzero).
- Regardless of TARGET, we return the rtx for where the value is placed.
+/* A subroutine of extract_bit_field_1 that converts return value X
+ to either MODE or TMODE. MODE, TMODE and UNSIGNEDP are arguments
+ to extract_bit_field. */
- STR_RTX is the structure containing the byte (a REG or MEM).
- UNSIGNEDP is nonzero if this is an unsigned bit field.
- MODE is the natural mode of the field value once extracted.
- TMODE is the mode the caller would like the value to have;
- but the value may be returned with type MODE instead.
+static rtx
+convert_extracted_bit_field (rtx x, enum machine_mode mode,
+ enum machine_mode tmode, bool unsignedp)
+{
+ if (GET_MODE (x) == tmode || GET_MODE (x) == mode)
+ return x;
+
+ /* If the x mode is not a scalar integral, first convert to the
+ integer mode of that size and then access it as a floating-point
+ value via a SUBREG. */
+ if (!SCALAR_INT_MODE_P (tmode))
+ {
+ enum machine_mode smode;
- TOTAL_SIZE is the size in bytes of the containing structure,
- or -1 if varying.
+ smode = mode_for_size (GET_MODE_BITSIZE (tmode), MODE_INT, 0);
+ x = convert_to_mode (smode, x, unsignedp);
+ x = force_reg (smode, x);
+ return gen_lowpart (tmode, x);
+ }
- If a TARGET is specified and we can store in it at no extra cost,
- we do so, and return TARGET.
- Otherwise, we return a REG of mode TMODE or MODE, with TMODE preferred
- if they are equally easy. */
+ return convert_to_mode (tmode, x, unsignedp);
+}
-rtx
-extract_bit_field (rtx str_rtx, unsigned HOST_WIDE_INT bitsize,
- unsigned HOST_WIDE_INT bitnum, int unsignedp, rtx target,
- enum machine_mode mode, enum machine_mode tmode)
+/* A subroutine of extract_bit_field, with the same arguments.
+ If FALLBACK_P is true, fall back to extract_fixed_bit_field
+ if we can find no other means of implementing the operation.
+ if FALLBACK_P is false, return NULL instead. */
+
+static rtx
+extract_bit_field_1 (rtx str_rtx, unsigned HOST_WIDE_INT bitsize,
+ unsigned HOST_WIDE_INT bitnum, int unsignedp, rtx target,
+ enum machine_mode mode, enum machine_mode tmode,
+ bool fallback_p)
{
unsigned int unit
= (MEM_P (str_rtx)) ? BITS_PER_UNIT : BITS_PER_WORD;
unsigned HOST_WIDE_INT offset, bitpos;
rtx op0 = str_rtx;
- rtx spec_target = target;
- rtx spec_target_subreg = 0;
enum machine_mode int_mode;
- enum machine_mode extv_mode = mode_for_extraction (EP_extv, 0);
- enum machine_mode extzv_mode = mode_for_extraction (EP_extzv, 0);
+ enum machine_mode ext_mode;
enum machine_mode mode1;
+ enum insn_code icode;
int byte_offset;
if (tmode == VOIDmode)
return op0;
}
+ /* See if we can get a better vector mode before extracting. */
+ if (VECTOR_MODE_P (GET_MODE (op0))
+ && !MEM_P (op0)
+ && GET_MODE_INNER (GET_MODE (op0)) != tmode)
+ {
+ enum machine_mode new_mode;
+ int nunits = GET_MODE_NUNITS (GET_MODE (op0));
+
+ if (GET_MODE_CLASS (tmode) == MODE_FLOAT)
+ new_mode = MIN_MODE_VECTOR_FLOAT;
+ else if (GET_MODE_CLASS (tmode) == MODE_FRACT)
+ new_mode = MIN_MODE_VECTOR_FRACT;
+ else if (GET_MODE_CLASS (tmode) == MODE_UFRACT)
+ new_mode = MIN_MODE_VECTOR_UFRACT;
+ else if (GET_MODE_CLASS (tmode) == MODE_ACCUM)
+ new_mode = MIN_MODE_VECTOR_ACCUM;
+ else if (GET_MODE_CLASS (tmode) == MODE_UACCUM)
+ new_mode = MIN_MODE_VECTOR_UACCUM;
+ else
+ new_mode = MIN_MODE_VECTOR_INT;
+
+ for (; new_mode != VOIDmode ; new_mode = GET_MODE_WIDER_MODE (new_mode))
+ if (GET_MODE_NUNITS (new_mode) == nunits
+ && GET_MODE_SIZE (new_mode) == GET_MODE_SIZE (GET_MODE (op0))
+ && targetm.vector_mode_supported_p (new_mode))
+ break;
+ if (new_mode != VOIDmode)
+ op0 = gen_lowpart (new_mode, op0);
+ }
+
/* Use vec_extract patterns for extracting parts of vectors whenever
available. */
if (VECTOR_MODE_P (GET_MODE (op0))
&& !MEM_P (op0)
- && (vec_extract_optab->handlers[GET_MODE (op0)].insn_code
+ && (optab_handler (vec_extract_optab, GET_MODE (op0))->insn_code
!= CODE_FOR_nothing)
&& ((bitnum + bitsize - 1) / GET_MODE_BITSIZE (GET_MODE_INNER (GET_MODE (op0)))
== bitnum / GET_MODE_BITSIZE (GET_MODE_INNER (GET_MODE (op0)))))
{
enum machine_mode outermode = GET_MODE (op0);
enum machine_mode innermode = GET_MODE_INNER (outermode);
- int icode = (int) vec_extract_optab->handlers[outermode].insn_code;
+ int icode = (int) optab_handler (vec_extract_optab, outermode)->insn_code;
unsigned HOST_WIDE_INT pos = bitnum / GET_MODE_BITSIZE (innermode);
rtx rtxpos = GEN_INT (pos);
rtx src = op0;
{
emit_insn (seq);
emit_insn (pat);
+ if (mode0 != mode)
+ return gen_lowpart (tmode, dest);
return dest;
}
}
{
if (MEM_P (op0))
op0 = adjust_address (op0, imode, 0);
- else
+ else if (imode != BLKmode)
{
- gcc_assert (imode != BLKmode);
op0 = gen_lowpart (imode, op0);
/* If we got a SUBREG, force it into a register since we
if (GET_CODE (op0) == SUBREG)
op0 = force_reg (imode, op0);
}
+ else if (REG_P (op0))
+ {
+ rtx reg, subreg;
+ imode = smallest_mode_for_size (GET_MODE_BITSIZE (GET_MODE (op0)),
+ MODE_INT);
+ reg = gen_reg_rtx (imode);
+ subreg = gen_lowpart_SUBREG (GET_MODE (op0), reg);
+ emit_move_insn (subreg, op0);
+ op0 = reg;
+ bitnum += SUBREG_BYTE (subreg) * BITS_PER_UNIT;
+ }
+ else
+ {
+ rtx mem = assign_stack_temp (GET_MODE (op0),
+ GET_MODE_SIZE (GET_MODE (op0)), 0);
+ emit_move_insn (mem, op0);
+ op0 = adjust_address (mem, BLKmode, 0);
+ }
}
}
? bitpos + bitsize == BITS_PER_WORD
: bitpos == 0)))
&& ((!MEM_P (op0)
- && TRULY_NOOP_TRUNCATION (GET_MODE_BITSIZE (mode),
+ && TRULY_NOOP_TRUNCATION (GET_MODE_BITSIZE (mode1),
GET_MODE_BITSIZE (GET_MODE (op0)))
&& GET_MODE_SIZE (mode1) != 0
&& byte_offset % GET_MODE_SIZE (mode1) == 0)
|| (offset * BITS_PER_UNIT % bitsize == 0
&& MEM_ALIGN (op0) % bitsize == 0)))))
{
- if (mode1 != GET_MODE (op0))
+ if (MEM_P (op0))
+ op0 = adjust_address (op0, mode1, offset);
+ else if (mode1 != GET_MODE (op0))
{
- if (MEM_P (op0))
- op0 = adjust_address (op0, mode1, offset);
- else
- {
- rtx sub = simplify_gen_subreg (mode1, op0, GET_MODE (op0),
- byte_offset);
- if (sub == NULL)
- goto no_subreg_mode_swap;
- op0 = sub;
- }
+ rtx sub = simplify_gen_subreg (mode1, op0, GET_MODE (op0),
+ byte_offset);
+ if (sub == NULL)
+ goto no_subreg_mode_swap;
+ op0 = sub;
}
if (mode1 != mode)
return convert_to_mode (tmode, op0, unsignedp);
target = gen_reg_rtx (mode);
/* Indicate for flow that the entire target reg is being set. */
- emit_insn (gen_rtx_CLOBBER (VOIDmode, target));
+ emit_clobber (target);
for (i = 0; i < nwords; i++)
{
}
/* Now OFFSET is nonzero only for memory operands. */
-
- if (unsignedp)
+ ext_mode = mode_for_extraction (unsignedp ? EP_extzv : EP_extv, 0);
+ icode = unsignedp ? CODE_FOR_extzv : CODE_FOR_extv;
+ if (ext_mode != MAX_MACHINE_MODE
+ && bitsize > 0
+ && GET_MODE_BITSIZE (ext_mode) >= bitsize
+ /* If op0 is a register, we need it in EXT_MODE to make it
+ acceptable to the format of ext(z)v. */
+ && !(GET_CODE (op0) == SUBREG && GET_MODE (op0) != ext_mode)
+ && !((REG_P (op0) || GET_CODE (op0) == SUBREG)
+ && (bitsize + bitpos > GET_MODE_BITSIZE (ext_mode)))
+ && check_predicate_volatile_ok (icode, 1, op0, GET_MODE (op0)))
{
- if (HAVE_extzv
- && (GET_MODE_BITSIZE (extzv_mode) >= bitsize)
- && ! ((REG_P (op0) || GET_CODE (op0) == SUBREG)
- && (bitsize + bitpos > GET_MODE_BITSIZE (extzv_mode))))
- {
- unsigned HOST_WIDE_INT xbitpos = bitpos, xoffset = offset;
- rtx bitsize_rtx, bitpos_rtx;
- rtx last = get_last_insn ();
- rtx xop0 = op0;
- rtx xtarget = target;
- rtx xspec_target = spec_target;
- rtx xspec_target_subreg = spec_target_subreg;
- rtx pat;
- enum machine_mode maxmode = mode_for_extraction (EP_extzv, 0);
-
- if (MEM_P (xop0))
- {
- int save_volatile_ok = volatile_ok;
- volatile_ok = 1;
-
- /* Is the memory operand acceptable? */
- if (! ((*insn_data[(int) CODE_FOR_extzv].operand[1].predicate)
- (xop0, GET_MODE (xop0))))
- {
- /* No, load into a reg and extract from there. */
- enum machine_mode bestmode;
-
- /* Get the mode to use for inserting into this field. If
- OP0 is BLKmode, get the smallest mode consistent with the
- alignment. If OP0 is a non-BLKmode object that is no
- wider than MAXMODE, use its mode. Otherwise, use the
- smallest mode containing the field. */
-
- if (GET_MODE (xop0) == BLKmode
- || (GET_MODE_SIZE (GET_MODE (op0))
- > GET_MODE_SIZE (maxmode)))
- bestmode = get_best_mode (bitsize, bitnum,
- MEM_ALIGN (xop0), maxmode,
- MEM_VOLATILE_P (xop0));
- else
- bestmode = GET_MODE (xop0);
-
- if (bestmode == VOIDmode
- || (SLOW_UNALIGNED_ACCESS (bestmode, MEM_ALIGN (xop0))
- && GET_MODE_BITSIZE (bestmode) > MEM_ALIGN (xop0)))
- goto extzv_loses;
-
- /* Compute offset as multiple of this unit,
- counting in bytes. */
- unit = GET_MODE_BITSIZE (bestmode);
- xoffset = (bitnum / unit) * GET_MODE_SIZE (bestmode);
- xbitpos = bitnum % unit;
- xop0 = adjust_address (xop0, bestmode, xoffset);
-
- /* Fetch it to a register in that size. */
- xop0 = force_reg (bestmode, xop0);
-
- /* XBITPOS counts within UNIT, which is what is expected. */
- }
- else
- /* Get ref to first byte containing part of the field. */
- xop0 = adjust_address (xop0, byte_mode, xoffset);
-
- volatile_ok = save_volatile_ok;
- }
+ unsigned HOST_WIDE_INT xbitpos = bitpos, xoffset = offset;
+ rtx bitsize_rtx, bitpos_rtx;
+ rtx last = get_last_insn ();
+ rtx xop0 = op0;
+ rtx xtarget = target;
+ rtx xspec_target = target;
+ rtx xspec_target_subreg = 0;
+ rtx pat;
- /* If op0 is a register, we need it in MAXMODE (which is usually
- SImode). to make it acceptable to the format of extzv. */
- if (GET_CODE (xop0) == SUBREG && GET_MODE (xop0) != maxmode)
- goto extzv_loses;
- if (REG_P (xop0) && GET_MODE (xop0) != maxmode)
- xop0 = gen_rtx_SUBREG (maxmode, xop0, 0);
+ /* If op0 is a register, we need it in EXT_MODE to make it
+ acceptable to the format of ext(z)v. */
+ if (REG_P (xop0) && GET_MODE (xop0) != ext_mode)
+ xop0 = gen_lowpart_SUBREG (ext_mode, xop0);
+ if (MEM_P (xop0))
+ /* Get ref to first byte containing part of the field. */
+ xop0 = adjust_address (xop0, byte_mode, xoffset);
- /* On big-endian machines, we count bits from the most significant.
- If the bit field insn does not, we must invert. */
- if (BITS_BIG_ENDIAN != BYTES_BIG_ENDIAN)
- xbitpos = unit - bitsize - xbitpos;
+ /* On big-endian machines, we count bits from the most significant.
+ If the bit field insn does not, we must invert. */
+ if (BITS_BIG_ENDIAN != BYTES_BIG_ENDIAN)
+ xbitpos = unit - bitsize - xbitpos;
- /* Now convert from counting within UNIT to counting in MAXMODE. */
- if (BITS_BIG_ENDIAN && !MEM_P (xop0))
- xbitpos += GET_MODE_BITSIZE (maxmode) - unit;
+ /* Now convert from counting within UNIT to counting in EXT_MODE. */
+ if (BITS_BIG_ENDIAN && !MEM_P (xop0))
+ xbitpos += GET_MODE_BITSIZE (ext_mode) - unit;
- unit = GET_MODE_BITSIZE (maxmode);
+ unit = GET_MODE_BITSIZE (ext_mode);
- if (xtarget == 0
- || (flag_force_mem && MEM_P (xtarget)))
- xtarget = xspec_target = gen_reg_rtx (tmode);
+ if (xtarget == 0)
+ xtarget = xspec_target = gen_reg_rtx (tmode);
- if (GET_MODE (xtarget) != maxmode)
+ if (GET_MODE (xtarget) != ext_mode)
+ {
+ /* Don't use LHS paradoxical subreg if explicit truncation is needed
+ between the mode of the extraction (word_mode) and the target
+ mode. Instead, create a temporary and use convert_move to set
+ the target. */
+ if (REG_P (xtarget)
+ && TRULY_NOOP_TRUNCATION (GET_MODE_BITSIZE (GET_MODE (xtarget)),
+ GET_MODE_BITSIZE (ext_mode)))
{
- if (REG_P (xtarget))
- {
- int wider = (GET_MODE_SIZE (maxmode)
- > GET_MODE_SIZE (GET_MODE (xtarget)));
- xtarget = gen_lowpart (maxmode, xtarget);
- if (wider)
- xspec_target_subreg = xtarget;
- }
- else
- xtarget = gen_reg_rtx (maxmode);
+ xtarget = gen_lowpart (ext_mode, xtarget);
+ if (GET_MODE_SIZE (ext_mode)
+ > GET_MODE_SIZE (GET_MODE (xspec_target)))
+ xspec_target_subreg = xtarget;
}
+ else
+ xtarget = gen_reg_rtx (ext_mode);
+ }
- /* If this machine's extzv insists on a register target,
- make sure we have one. */
- if (! ((*insn_data[(int) CODE_FOR_extzv].operand[0].predicate)
- (xtarget, maxmode)))
- xtarget = gen_reg_rtx (maxmode);
+ /* If this machine's ext(z)v insists on a register target,
+ make sure we have one. */
+ if (!insn_data[(int) icode].operand[0].predicate (xtarget, ext_mode))
+ xtarget = gen_reg_rtx (ext_mode);
- bitsize_rtx = GEN_INT (bitsize);
- bitpos_rtx = GEN_INT (xbitpos);
+ bitsize_rtx = GEN_INT (bitsize);
+ bitpos_rtx = GEN_INT (xbitpos);
- pat = gen_extzv (xtarget, xop0, bitsize_rtx, bitpos_rtx);
- if (pat)
- {
- emit_insn (pat);
- target = xtarget;
- spec_target = xspec_target;
- spec_target_subreg = xspec_target_subreg;
- }
- else
- {
- delete_insns_since (last);
- target = extract_fixed_bit_field (int_mode, op0, offset, bitsize,
- bitpos, target, 1);
- }
+ pat = (unsignedp
+ ? gen_extzv (xtarget, xop0, bitsize_rtx, bitpos_rtx)
+ : gen_extv (xtarget, xop0, bitsize_rtx, bitpos_rtx));
+ if (pat)
+ {
+ emit_insn (pat);
+ if (xtarget == xspec_target)
+ return xtarget;
+ if (xtarget == xspec_target_subreg)
+ return xspec_target;
+ return convert_extracted_bit_field (xtarget, mode, tmode, unsignedp);
}
- else
- extzv_loses:
- target = extract_fixed_bit_field (int_mode, op0, offset, bitsize,
- bitpos, target, 1);
+ delete_insns_since (last);
}
- else
- {
- if (HAVE_extv
- && (GET_MODE_BITSIZE (extv_mode) >= bitsize)
- && ! ((REG_P (op0) || GET_CODE (op0) == SUBREG)
- && (bitsize + bitpos > GET_MODE_BITSIZE (extv_mode))))
- {
- int xbitpos = bitpos, xoffset = offset;
- rtx bitsize_rtx, bitpos_rtx;
- rtx last = get_last_insn ();
- rtx xop0 = op0, xtarget = target;
- rtx xspec_target = spec_target;
- rtx xspec_target_subreg = spec_target_subreg;
- rtx pat;
- enum machine_mode maxmode = mode_for_extraction (EP_extv, 0);
-
- if (MEM_P (xop0))
- {
- /* Is the memory operand acceptable? */
- if (! ((*insn_data[(int) CODE_FOR_extv].operand[1].predicate)
- (xop0, GET_MODE (xop0))))
- {
- /* No, load into a reg and extract from there. */
- enum machine_mode bestmode;
-
- /* Get the mode to use for inserting into this field. If
- OP0 is BLKmode, get the smallest mode consistent with the
- alignment. If OP0 is a non-BLKmode object that is no
- wider than MAXMODE, use its mode. Otherwise, use the
- smallest mode containing the field. */
-
- if (GET_MODE (xop0) == BLKmode
- || (GET_MODE_SIZE (GET_MODE (op0))
- > GET_MODE_SIZE (maxmode)))
- bestmode = get_best_mode (bitsize, bitnum,
- MEM_ALIGN (xop0), maxmode,
- MEM_VOLATILE_P (xop0));
- else
- bestmode = GET_MODE (xop0);
-
- if (bestmode == VOIDmode
- || (SLOW_UNALIGNED_ACCESS (bestmode, MEM_ALIGN (xop0))
- && GET_MODE_BITSIZE (bestmode) > MEM_ALIGN (xop0)))
- goto extv_loses;
-
- /* Compute offset as multiple of this unit,
- counting in bytes. */
- unit = GET_MODE_BITSIZE (bestmode);
- xoffset = (bitnum / unit) * GET_MODE_SIZE (bestmode);
- xbitpos = bitnum % unit;
- xop0 = adjust_address (xop0, bestmode, xoffset);
-
- /* Fetch it to a register in that size. */
- xop0 = force_reg (bestmode, xop0);
-
- /* XBITPOS counts within UNIT, which is what is expected. */
- }
- else
- /* Get ref to first byte containing part of the field. */
- xop0 = adjust_address (xop0, byte_mode, xoffset);
- }
-
- /* If op0 is a register, we need it in MAXMODE (which is usually
- SImode) to make it acceptable to the format of extv. */
- if (GET_CODE (xop0) == SUBREG && GET_MODE (xop0) != maxmode)
- goto extv_loses;
- if (REG_P (xop0) && GET_MODE (xop0) != maxmode)
- xop0 = gen_rtx_SUBREG (maxmode, xop0, 0);
- /* On big-endian machines, we count bits from the most significant.
- If the bit field insn does not, we must invert. */
- if (BITS_BIG_ENDIAN != BYTES_BIG_ENDIAN)
- xbitpos = unit - bitsize - xbitpos;
-
- /* XBITPOS counts within a size of UNIT.
- Adjust to count within a size of MAXMODE. */
- if (BITS_BIG_ENDIAN && !MEM_P (xop0))
- xbitpos += (GET_MODE_BITSIZE (maxmode) - unit);
+ /* If OP0 is a memory, try copying it to a register and seeing if a
+ cheap register alternative is available. */
+ if (ext_mode != MAX_MACHINE_MODE && MEM_P (op0))
+ {
+ enum machine_mode bestmode;
+
+ /* Get the mode to use for inserting into this field. If
+ OP0 is BLKmode, get the smallest mode consistent with the
+ alignment. If OP0 is a non-BLKmode object that is no
+ wider than EXT_MODE, use its mode. Otherwise, use the
+ smallest mode containing the field. */
+
+ if (GET_MODE (op0) == BLKmode
+ || (ext_mode != MAX_MACHINE_MODE
+ && GET_MODE_SIZE (GET_MODE (op0)) > GET_MODE_SIZE (ext_mode)))
+ bestmode = get_best_mode (bitsize, bitnum, MEM_ALIGN (op0),
+ (ext_mode == MAX_MACHINE_MODE
+ ? VOIDmode : ext_mode),
+ MEM_VOLATILE_P (op0));
+ else
+ bestmode = GET_MODE (op0);
- unit = GET_MODE_BITSIZE (maxmode);
+ if (bestmode != VOIDmode
+ && !(SLOW_UNALIGNED_ACCESS (bestmode, MEM_ALIGN (op0))
+ && GET_MODE_BITSIZE (bestmode) > MEM_ALIGN (op0)))
+ {
+ unsigned HOST_WIDE_INT xoffset, xbitpos;
- if (xtarget == 0
- || (flag_force_mem && MEM_P (xtarget)))
- xtarget = xspec_target = gen_reg_rtx (tmode);
+ /* Compute the offset as a multiple of this unit,
+ counting in bytes. */
+ unit = GET_MODE_BITSIZE (bestmode);
+ xoffset = (bitnum / unit) * GET_MODE_SIZE (bestmode);
+ xbitpos = bitnum % unit;
- if (GET_MODE (xtarget) != maxmode)
+ /* Make sure the register is big enough for the whole field. */
+ if (xoffset * BITS_PER_UNIT + unit
+ >= offset * BITS_PER_UNIT + bitsize)
{
- if (REG_P (xtarget))
- {
- int wider = (GET_MODE_SIZE (maxmode)
- > GET_MODE_SIZE (GET_MODE (xtarget)));
- xtarget = gen_lowpart (maxmode, xtarget);
- if (wider)
- xspec_target_subreg = xtarget;
- }
- else
- xtarget = gen_reg_rtx (maxmode);
- }
+ rtx last, result, xop0;
- /* If this machine's extv insists on a register target,
- make sure we have one. */
- if (! ((*insn_data[(int) CODE_FOR_extv].operand[0].predicate)
- (xtarget, maxmode)))
- xtarget = gen_reg_rtx (maxmode);
+ last = get_last_insn ();
- bitsize_rtx = GEN_INT (bitsize);
- bitpos_rtx = GEN_INT (xbitpos);
+ /* Fetch it to a register in that size. */
+ xop0 = adjust_address (op0, bestmode, xoffset);
+ xop0 = force_reg (bestmode, xop0);
+ result = extract_bit_field_1 (xop0, bitsize, xbitpos,
+ unsignedp, target,
+ mode, tmode, false);
+ if (result)
+ return result;
- pat = gen_extv (xtarget, xop0, bitsize_rtx, bitpos_rtx);
- if (pat)
- {
- emit_insn (pat);
- target = xtarget;
- spec_target = xspec_target;
- spec_target_subreg = xspec_target_subreg;
- }
- else
- {
delete_insns_since (last);
- target = extract_fixed_bit_field (int_mode, op0, offset, bitsize,
- bitpos, target, 0);
}
}
- else
- extv_loses:
- target = extract_fixed_bit_field (int_mode, op0, offset, bitsize,
- bitpos, target, 0);
}
- if (target == spec_target)
- return target;
- if (target == spec_target_subreg)
- return spec_target;
- if (GET_MODE (target) != tmode && GET_MODE (target) != mode)
- {
- /* If the target mode is not a scalar integral, first convert to the
- integer mode of that size and then access it as a floating-point
- value via a SUBREG. */
- if (!SCALAR_INT_MODE_P (tmode))
- {
- enum machine_mode smode
- = mode_for_size (GET_MODE_BITSIZE (tmode), MODE_INT, 0);
- target = convert_to_mode (smode, target, unsignedp);
- target = force_reg (smode, target);
- return gen_lowpart (tmode, target);
- }
- return convert_to_mode (tmode, target, unsignedp);
- }
- return target;
+ if (!fallback_p)
+ return NULL;
+
+ target = extract_fixed_bit_field (int_mode, op0, offset, bitsize,
+ bitpos, target, unsignedp);
+ return convert_extracted_bit_field (target, mode, tmode, unsignedp);
+}
+
+/* Generate code to extract a byte-field from STR_RTX
+ containing BITSIZE bits, starting at BITNUM,
+ and put it in TARGET if possible (if TARGET is nonzero).
+ Regardless of TARGET, we return the rtx for where the value is placed.
+
+ STR_RTX is the structure containing the byte (a REG or MEM).
+ UNSIGNEDP is nonzero if this is an unsigned bit field.
+ MODE is the natural mode of the field value once extracted.
+ TMODE is the mode the caller would like the value to have;
+ but the value may be returned with type MODE instead.
+
+ If a TARGET is specified and we can store in it at no extra cost,
+ we do so, and return TARGET.
+ Otherwise, we return a REG of mode TMODE or MODE, with TMODE preferred
+ if they are equally easy. */
+
+rtx
+extract_bit_field (rtx str_rtx, unsigned HOST_WIDE_INT bitsize,
+ unsigned HOST_WIDE_INT bitnum, int unsignedp, rtx target,
+ enum machine_mode mode, enum machine_mode tmode)
+{
+ return extract_bit_field_1 (str_rtx, bitsize, bitnum, unsignedp,
+ target, mode, tmode, true);
}
\f
/* Extract a bit field using shifts and boolean operations
static rtx
mask_rtx (enum machine_mode mode, int bitpos, int bitsize, int complement)
{
- HOST_WIDE_INT masklow, maskhigh;
-
- if (bitsize == 0)
- masklow = 0;
- else if (bitpos < HOST_BITS_PER_WIDE_INT)
- masklow = (HOST_WIDE_INT) -1 << bitpos;
- else
- masklow = 0;
-
- if (bitpos + bitsize < HOST_BITS_PER_WIDE_INT)
- masklow &= ((unsigned HOST_WIDE_INT) -1
- >> (HOST_BITS_PER_WIDE_INT - bitpos - bitsize));
+ double_int mask;
- if (bitpos <= HOST_BITS_PER_WIDE_INT)
- maskhigh = -1;
- else
- maskhigh = (HOST_WIDE_INT) -1 << (bitpos - HOST_BITS_PER_WIDE_INT);
-
- if (bitsize == 0)
- maskhigh = 0;
- else if (bitpos + bitsize > HOST_BITS_PER_WIDE_INT)
- maskhigh &= ((unsigned HOST_WIDE_INT) -1
- >> (2 * HOST_BITS_PER_WIDE_INT - bitpos - bitsize));
- else
- maskhigh = 0;
+ mask = double_int_mask (bitsize);
+ mask = double_int_lshift (mask, bitpos, HOST_BITS_PER_DOUBLE_INT, false);
if (complement)
- {
- maskhigh = ~maskhigh;
- masklow = ~masklow;
- }
+ mask = double_int_not (mask);
- return immed_double_const (masklow, maskhigh, mode);
+ return immed_double_int_const (mask, mode);
}
/* Return a constant integer (CONST_INT or CONST_DOUBLE) rtx with the value
static rtx
lshift_value (enum machine_mode mode, rtx value, int bitpos, int bitsize)
{
- unsigned HOST_WIDE_INT v = INTVAL (value);
- HOST_WIDE_INT low, high;
+ double_int val;
+
+ val = double_int_zext (uhwi_to_double_int (INTVAL (value)), bitsize);
+ val = double_int_lshift (val, bitpos, HOST_BITS_PER_DOUBLE_INT, false);
- if (bitsize < HOST_BITS_PER_WIDE_INT)
- v &= ~((HOST_WIDE_INT) -1 << bitsize);
-
- if (bitpos < HOST_BITS_PER_WIDE_INT)
- {
- low = v << bitpos;
- high = (bitpos > 0 ? (v >> (HOST_BITS_PER_WIDE_INT - bitpos)) : 0);
- }
- else
- {
- low = 0;
- high = v << (bitpos - HOST_BITS_PER_WIDE_INT);
- }
-
- return immed_double_const (low, high, mode);
+ return immed_double_int_const (val, mode);
}
\f
-/* Extract a bit field from a memory by forcing the alignment of the
- memory. This efficient only if the field spans at least 4 boundaries.
-
- OP0 is the MEM.
- BITSIZE is the field width; BITPOS is the position of the first bit.
- UNSIGNEDP is true if the result should be zero-extended. */
-
-static rtx
-extract_force_align_mem_bit_field (rtx op0, unsigned HOST_WIDE_INT bitsize,
- unsigned HOST_WIDE_INT bitpos,
- int unsignedp)
-{
- enum machine_mode mode, dmode;
- unsigned int m_bitsize, m_size;
- unsigned int sign_shift_up, sign_shift_dn;
- rtx base, a1, a2, v1, v2, comb, shift, result, start;
-
- /* Choose a mode that will fit BITSIZE. */
- mode = smallest_mode_for_size (bitsize, MODE_INT);
- m_size = GET_MODE_SIZE (mode);
- m_bitsize = GET_MODE_BITSIZE (mode);
-
- /* Choose a mode twice as wide. Fail if no such mode exists. */
- dmode = mode_for_size (m_bitsize * 2, MODE_INT, false);
- if (dmode == BLKmode)
- return NULL;
-
- do_pending_stack_adjust ();
- start = get_last_insn ();
-
- /* At the end, we'll need an additional shift to deal with sign/zero
- extension. By default this will be a left+right shift of the
- appropriate size. But we may be able to eliminate one of them. */
- sign_shift_up = sign_shift_dn = m_bitsize - bitsize;
-
- if (STRICT_ALIGNMENT)
- {
- base = plus_constant (XEXP (op0, 0), bitpos / BITS_PER_UNIT);
- bitpos %= BITS_PER_UNIT;
-
- /* We load two values to be concatenate. There's an edge condition
- that bears notice -- an aligned value at the end of a page can
- only load one value lest we segfault. So the two values we load
- are at "base & -size" and "(base + size - 1) & -size". If base
- is unaligned, the addresses will be aligned and sequential; if
- base is aligned, the addresses will both be equal to base. */
-
- a1 = expand_simple_binop (Pmode, AND, force_operand (base, NULL),
- GEN_INT (-(HOST_WIDE_INT)m_size),
- NULL, true, OPTAB_LIB_WIDEN);
- mark_reg_pointer (a1, m_bitsize);
- v1 = gen_rtx_MEM (mode, a1);
- set_mem_align (v1, m_bitsize);
- v1 = force_reg (mode, validize_mem (v1));
-
- a2 = plus_constant (base, GET_MODE_SIZE (mode) - 1);
- a2 = expand_simple_binop (Pmode, AND, force_operand (a2, NULL),
- GEN_INT (-(HOST_WIDE_INT)m_size),
- NULL, true, OPTAB_LIB_WIDEN);
- v2 = gen_rtx_MEM (mode, a2);
- set_mem_align (v2, m_bitsize);
- v2 = force_reg (mode, validize_mem (v2));
-
- /* Combine these two values into a double-word value. */
- if (m_bitsize == BITS_PER_WORD)
- {
- comb = gen_reg_rtx (dmode);
- emit_insn (gen_rtx_CLOBBER (VOIDmode, comb));
- emit_move_insn (gen_rtx_SUBREG (mode, comb, 0), v1);
- emit_move_insn (gen_rtx_SUBREG (mode, comb, m_size), v2);
- }
- else
- {
- if (BYTES_BIG_ENDIAN)
- comb = v1, v1 = v2, v2 = comb;
- v1 = convert_modes (dmode, mode, v1, true);
- if (v1 == NULL)
- goto fail;
- v2 = convert_modes (dmode, mode, v2, true);
- v2 = expand_simple_binop (dmode, ASHIFT, v2, GEN_INT (m_bitsize),
- NULL, true, OPTAB_LIB_WIDEN);
- if (v2 == NULL)
- goto fail;
- comb = expand_simple_binop (dmode, IOR, v1, v2, NULL,
- true, OPTAB_LIB_WIDEN);
- if (comb == NULL)
- goto fail;
- }
-
- shift = expand_simple_binop (Pmode, AND, base, GEN_INT (m_size - 1),
- NULL, true, OPTAB_LIB_WIDEN);
- shift = expand_mult (Pmode, shift, GEN_INT (BITS_PER_UNIT), NULL, 1);
-
- if (bitpos != 0)
- {
- if (sign_shift_up <= bitpos)
- bitpos -= sign_shift_up, sign_shift_up = 0;
- shift = expand_simple_binop (Pmode, PLUS, shift, GEN_INT (bitpos),
- NULL, true, OPTAB_LIB_WIDEN);
- }
- }
- else
- {
- unsigned HOST_WIDE_INT offset = bitpos / BITS_PER_UNIT;
- bitpos %= BITS_PER_UNIT;
-
- /* When strict alignment is not required, we can just load directly
- from memory without masking. If the remaining BITPOS offset is
- small enough, we may be able to do all operations in MODE as
- opposed to DMODE. */
- if (bitpos + bitsize <= m_bitsize)
- dmode = mode;
- comb = adjust_address (op0, dmode, offset);
-
- if (sign_shift_up <= bitpos)
- bitpos -= sign_shift_up, sign_shift_up = 0;
- shift = GEN_INT (bitpos);
- }
-
- /* Shift down the double-word such that the requested value is at bit 0. */
- if (shift != const0_rtx)
- comb = expand_simple_binop (dmode, unsignedp ? LSHIFTRT : ASHIFTRT,
- comb, shift, NULL, unsignedp, OPTAB_LIB_WIDEN);
- if (comb == NULL)
- goto fail;
-
- /* If the field exactly matches MODE, then all we need to do is return the
- lowpart. Otherwise, shift to get the sign bits set properly. */
- result = force_reg (mode, gen_lowpart (mode, comb));
-
- if (sign_shift_up)
- result = expand_simple_binop (mode, ASHIFT, result,
- GEN_INT (sign_shift_up),
- NULL_RTX, 0, OPTAB_LIB_WIDEN);
- if (sign_shift_dn)
- result = expand_simple_binop (mode, unsignedp ? LSHIFTRT : ASHIFTRT,
- result, GEN_INT (sign_shift_dn),
- NULL_RTX, 0, OPTAB_LIB_WIDEN);
-
- return result;
-
- fail:
- delete_insns_since (start);
- return NULL;
-}
-
/* Extract a bit field that is split across two words
and return an RTX for the result.
if (REG_P (op0) || GET_CODE (op0) == SUBREG)
unit = BITS_PER_WORD;
else
- {
- unit = MIN (MEM_ALIGN (op0), BITS_PER_WORD);
- if (0 && bitsize / unit > 2)
- {
- rtx tmp = extract_force_align_mem_bit_field (op0, bitsize, bitpos,
- unsignedp);
- if (tmp)
- return tmp;
- }
- }
+ unit = MIN (MEM_ALIGN (op0), BITS_PER_WORD);
while (bitsdone < bitsize)
{
NULL_RTX, 0);
}
\f
+/* Try to read the low bits of SRC as an rvalue of mode MODE, preserving
+ the bit pattern. SRC_MODE is the mode of SRC; if this is smaller than
+ MODE, fill the upper bits with zeros. Fail if the layout of either
+ mode is unknown (as for CC modes) or if the extraction would involve
+ unprofitable mode punning. Return the value on success, otherwise
+ return null.
+
+ This is different from gen_lowpart* in these respects:
+
+ - the returned value must always be considered an rvalue
+
+ - when MODE is wider than SRC_MODE, the extraction involves
+ a zero extension
+
+ - when MODE is smaller than SRC_MODE, the extraction involves
+ a truncation (and is thus subject to TRULY_NOOP_TRUNCATION).
+
+ In other words, this routine performs a computation, whereas the
+ gen_lowpart* routines are conceptually lvalue or rvalue subreg
+ operations. */
+
+rtx
+extract_low_bits (enum machine_mode mode, enum machine_mode src_mode, rtx src)
+{
+ enum machine_mode int_mode, src_int_mode;
+
+ if (mode == src_mode)
+ return src;
+
+ if (CONSTANT_P (src))
+ {
+ /* simplify_gen_subreg can't be used here, as if simplify_subreg
+ fails, it will happily create (subreg (symbol_ref)) or similar
+ invalid SUBREGs. */
+ unsigned int byte = subreg_lowpart_offset (mode, src_mode);
+ rtx ret = simplify_subreg (mode, src, src_mode, byte);
+ if (ret)
+ return ret;
+
+ if (GET_MODE (src) == VOIDmode
+ || !validate_subreg (mode, src_mode, src, byte))
+ return NULL_RTX;
+
+ src = force_reg (GET_MODE (src), src);
+ return gen_rtx_SUBREG (mode, src, byte);
+ }
+
+ if (GET_MODE_CLASS (mode) == MODE_CC || GET_MODE_CLASS (src_mode) == MODE_CC)
+ return NULL_RTX;
+
+ if (GET_MODE_BITSIZE (mode) == GET_MODE_BITSIZE (src_mode)
+ && MODES_TIEABLE_P (mode, src_mode))
+ {
+ rtx x = gen_lowpart_common (mode, src);
+ if (x)
+ return x;
+ }
+
+ src_int_mode = int_mode_for_mode (src_mode);
+ int_mode = int_mode_for_mode (mode);
+ if (src_int_mode == BLKmode || int_mode == BLKmode)
+ return NULL_RTX;
+
+ if (!MODES_TIEABLE_P (src_int_mode, src_mode))
+ return NULL_RTX;
+ if (!MODES_TIEABLE_P (int_mode, mode))
+ return NULL_RTX;
+
+ src = gen_lowpart (src_int_mode, src);
+ src = convert_modes (int_mode, src_int_mode, src, true);
+ src = gen_lowpart (mode, src);
+ return src;
+}
+\f
/* Add INC into TARGET. */
void
rtx op1, temp = 0;
int left = (code == LSHIFT_EXPR || code == LROTATE_EXPR);
int rotate = (code == LROTATE_EXPR || code == RROTATE_EXPR);
- int try;
+ optab lshift_optab = ashl_optab;
+ optab rshift_arith_optab = ashr_optab;
+ optab rshift_uns_optab = lshr_optab;
+ optab lrotate_optab = rotl_optab;
+ optab rrotate_optab = rotr_optab;
+ enum machine_mode op1_mode;
+ int attempt;
+ bool speed = optimize_insn_for_speed_p ();
+
+ op1 = expand_normal (amount);
+ op1_mode = GET_MODE (op1);
+
+ /* Determine whether the shift/rotate amount is a vector, or scalar. If the
+ shift amount is a vector, use the vector/vector shift patterns. */
+ if (VECTOR_MODE_P (mode) && VECTOR_MODE_P (op1_mode))
+ {
+ lshift_optab = vashl_optab;
+ rshift_arith_optab = vashr_optab;
+ rshift_uns_optab = vlshr_optab;
+ lrotate_optab = vrotl_optab;
+ rrotate_optab = vrotr_optab;
+ }
/* Previously detected shift-counts computed by NEGATE_EXPR
and shifted in the other direction; but that does not work
on all machines. */
- op1 = expand_expr (amount, NULL_RTX, VOIDmode, 0);
-
if (SHIFT_COUNT_TRUNCATED)
{
- if (GET_CODE (op1) == CONST_INT
+ if (CONST_INT_P (op1)
&& ((unsigned HOST_WIDE_INT) INTVAL (op1) >=
(unsigned HOST_WIDE_INT) GET_MODE_BITSIZE (mode)))
op1 = GEN_INT ((unsigned HOST_WIDE_INT) INTVAL (op1)
% GET_MODE_BITSIZE (mode));
else if (GET_CODE (op1) == SUBREG
- && subreg_lowpart_p (op1))
+ && subreg_lowpart_p (op1)
+ && INTEGRAL_MODE_P (GET_MODE (SUBREG_REG (op1))))
op1 = SUBREG_REG (op1);
}
/* Check whether its cheaper to implement a left shift by a constant
bit count by a sequence of additions. */
if (code == LSHIFT_EXPR
- && GET_CODE (op1) == CONST_INT
+ && CONST_INT_P (op1)
&& INTVAL (op1) > 0
&& INTVAL (op1) < GET_MODE_BITSIZE (mode)
- && shift_cost[mode][INTVAL (op1)] > INTVAL (op1) * add_cost[mode])
+ && INTVAL (op1) < MAX_BITS_PER_WORD
+ && shift_cost[speed][mode][INTVAL (op1)] > INTVAL (op1) * add_cost[speed][mode]
+ && shift_cost[speed][mode][INTVAL (op1)] != MAX_COST)
{
int i;
for (i = 0; i < INTVAL (op1); i++)
return shifted;
}
- for (try = 0; temp == 0 && try < 3; try++)
+ for (attempt = 0; temp == 0 && attempt < 3; attempt++)
{
enum optab_methods methods;
- if (try == 0)
+ if (attempt == 0)
methods = OPTAB_DIRECT;
- else if (try == 1)
+ else if (attempt == 1)
methods = OPTAB_WIDEN;
else
methods = OPTAB_LIB_WIDEN;
code below. */
rtx subtarget = target == shifted ? 0 : target;
+ tree new_amount, other_amount;
rtx temp1;
tree type = TREE_TYPE (amount);
- tree new_amount = make_tree (type, op1);
- tree other_amount
- = fold (build2 (MINUS_EXPR, type,
- build_int_cst (type, GET_MODE_BITSIZE (mode)),
- amount));
+ if (GET_MODE (op1) != TYPE_MODE (type)
+ && GET_MODE (op1) != VOIDmode)
+ op1 = convert_to_mode (TYPE_MODE (type), op1, 1);
+ new_amount = make_tree (type, op1);
+ other_amount
+ = fold_build2 (MINUS_EXPR, type,
+ build_int_cst (type, GET_MODE_BITSIZE (mode)),
+ new_amount);
shifted = force_reg (mode, shifted);
temp = expand_shift (left ? LSHIFT_EXPR : RSHIFT_EXPR,
- mode, shifted, new_amount, subtarget, 1);
+ mode, shifted, new_amount, 0, 1);
temp1 = expand_shift (left ? RSHIFT_EXPR : LSHIFT_EXPR,
- mode, shifted, other_amount, 0, 1);
+ mode, shifted, other_amount, subtarget, 1);
return expand_binop (mode, ior_optab, temp, temp1, target,
unsignedp, methods);
}
temp = expand_binop (mode,
- left ? rotl_optab : rotr_optab,
+ left ? lrotate_optab : rrotate_optab,
shifted, op1, target, unsignedp, methods);
-
- /* If we don't have the rotate, but we are rotating by a constant
- that is in range, try a rotate in the opposite direction. */
-
- if (temp == 0 && GET_CODE (op1) == CONST_INT
- && INTVAL (op1) > 0
- && (unsigned int) INTVAL (op1) < GET_MODE_BITSIZE (mode))
- temp = expand_binop (mode,
- left ? rotr_optab : rotl_optab,
- shifted,
- GEN_INT (GET_MODE_BITSIZE (mode)
- - INTVAL (op1)),
- target, unsignedp, methods);
}
else if (unsignedp)
temp = expand_binop (mode,
- left ? ashl_optab : lshr_optab,
+ left ? lshift_optab : rshift_uns_optab,
shifted, op1, target, unsignedp, methods);
/* Do arithmetic shifts.
/* Arithmetic shift */
temp = expand_binop (mode,
- left ? ashl_optab : ashr_optab,
+ left ? lshift_optab : rshift_arith_optab,
shifted, op1, target, unsignedp, methods1);
}
return temp;
}
\f
-enum alg_code { alg_unknown, alg_zero, alg_m, alg_shift,
- alg_add_t_m2, alg_sub_t_m2,
- alg_add_factor, alg_sub_factor,
- alg_add_t2_m, alg_sub_t2_m };
+enum alg_code {
+ alg_unknown,
+ alg_zero,
+ alg_m, alg_shift,
+ alg_add_t_m2,
+ alg_sub_t_m2,
+ alg_add_factor,
+ alg_sub_factor,
+ alg_add_t2_m,
+ alg_sub_t2_m,
+ alg_impossible
+};
/* This structure holds the "cost" of a multiply sequence. The
"cost" field holds the total rtx_cost of every operator in the
/* The entry for our multiplication cache/hash table. */
struct alg_hash_entry {
/* The number we are multiplying by. */
- unsigned int t;
+ unsigned HOST_WIDE_INT t;
/* The mode in which we are multiplying something by T. */
enum machine_mode mode;
/* The best multiplication algorithm for t. */
enum alg_code alg;
+
+ /* The cost of multiplication if ALG_CODE is not alg_impossible.
+ Otherwise, the cost within which multiplication by T is
+ impossible. */
+ struct mult_cost cost;
+
+ /* OPtimized for speed? */
+ bool speed;
};
/* The number of cache/hash entries. */
+#if HOST_BITS_PER_WIDE_INT == 64
+#define NUM_ALG_HASH_ENTRIES 1031
+#else
#define NUM_ALG_HASH_ENTRIES 307
+#endif
/* Each entry of ALG_HASH caches alg_code for some integer. This is
actually a hash table. If we have a collision, that the older
struct mult_cost best_cost;
struct mult_cost new_limit;
int op_cost, op_latency;
+ unsigned HOST_WIDE_INT orig_t = t;
unsigned HOST_WIDE_INT q;
int maxm = MIN (BITS_PER_WORD, GET_MODE_BITSIZE (mode));
int hash_index;
bool cache_hit = false;
enum alg_code cache_alg = alg_zero;
+ bool speed = optimize_insn_for_speed_p ();
/* Indicate that no algorithm is yet found. If no algorithm
is found, this value will be returned and indicate failure. */
fail now. */
if (t == 0)
{
- if (MULT_COST_LESS (cost_limit, zero_cost))
+ if (MULT_COST_LESS (cost_limit, zero_cost[speed]))
return;
else
{
alg_out->ops = 1;
- alg_out->cost.cost = zero_cost;
- alg_out->cost.latency = zero_cost;
+ alg_out->cost.cost = zero_cost[speed];
+ alg_out->cost.latency = zero_cost[speed];
alg_out->op[0] = alg_zero;
return;
}
/* We'll be needing a couple extra algorithm structures now. */
- alg_in = alloca (sizeof (struct algorithm));
- best_alg = alloca (sizeof (struct algorithm));
+ alg_in = XALLOCA (struct algorithm);
+ best_alg = XALLOCA (struct algorithm);
best_cost = *cost_limit;
/* Compute the hash index. */
- hash_index = (t ^ (unsigned int) mode) % NUM_ALG_HASH_ENTRIES;
+ hash_index = (t ^ (unsigned int) mode ^ (speed * 256)) % NUM_ALG_HASH_ENTRIES;
/* See if we already know what to do for T. */
if (alg_hash[hash_index].t == t
&& alg_hash[hash_index].mode == mode
+ && alg_hash[hash_index].mode == mode
+ && alg_hash[hash_index].speed == speed
&& alg_hash[hash_index].alg != alg_unknown)
{
- cache_hit = true;
cache_alg = alg_hash[hash_index].alg;
- switch (cache_alg)
+
+ if (cache_alg == alg_impossible)
{
- case alg_shift:
- goto do_alg_shift;
+ /* The cache tells us that it's impossible to synthesize
+ multiplication by T within alg_hash[hash_index].cost. */
+ if (!CHEAPER_MULT_COST (&alg_hash[hash_index].cost, cost_limit))
+ /* COST_LIMIT is at least as restrictive as the one
+ recorded in the hash table, in which case we have no
+ hope of synthesizing a multiplication. Just
+ return. */
+ return;
+
+ /* If we get here, COST_LIMIT is less restrictive than the
+ one recorded in the hash table, so we may be able to
+ synthesize a multiplication. Proceed as if we didn't
+ have the cache entry. */
+ }
+ else
+ {
+ if (CHEAPER_MULT_COST (cost_limit, &alg_hash[hash_index].cost))
+ /* The cached algorithm shows that this multiplication
+ requires more cost than COST_LIMIT. Just return. This
+ way, we don't clobber this cache entry with
+ alg_impossible but retain useful information. */
+ return;
- case alg_add_t_m2:
- case alg_sub_t_m2:
- goto do_alg_addsub_t_m2;
+ cache_hit = true;
- case alg_add_factor:
- case alg_sub_factor:
- goto do_alg_addsub_factor;
+ switch (cache_alg)
+ {
+ case alg_shift:
+ goto do_alg_shift;
- case alg_add_t2_m:
- goto do_alg_add_t2_m;
+ case alg_add_t_m2:
+ case alg_sub_t_m2:
+ goto do_alg_addsub_t_m2;
- case alg_sub_t2_m:
- goto do_alg_sub_t2_m;
+ case alg_add_factor:
+ case alg_sub_factor:
+ goto do_alg_addsub_factor;
- default:
- gcc_unreachable ();
+ case alg_add_t2_m:
+ goto do_alg_add_t2_m;
+
+ case alg_sub_t2_m:
+ goto do_alg_sub_t2_m;
+
+ default:
+ gcc_unreachable ();
+ }
}
}
q = t >> m;
/* The function expand_shift will choose between a shift and
a sequence of additions, so the observed cost is given as
- MIN (m * add_cost[mode], shift_cost[mode][m]). */
- op_cost = m * add_cost[mode];
- if (shift_cost[mode][m] < op_cost)
- op_cost = shift_cost[mode][m];
+ MIN (m * add_cost[speed][mode], shift_cost[speed][mode][m]). */
+ op_cost = m * add_cost[speed][mode];
+ if (shift_cost[speed][mode][m] < op_cost)
+ op_cost = shift_cost[speed][mode][m];
new_limit.cost = best_cost.cost - op_cost;
new_limit.latency = best_cost.latency - op_cost;
synth_mult (alg_in, q, &new_limit, mode);
best_alg->log[best_alg->ops] = m;
best_alg->op[best_alg->ops] = alg_shift;
}
+
+ /* See if treating ORIG_T as a signed number yields a better
+ sequence. Try this sequence only for a negative ORIG_T
+ as it would be useless for a non-negative ORIG_T. */
+ if ((HOST_WIDE_INT) orig_t < 0)
+ {
+ /* Shift ORIG_T as follows because a right shift of a
+ negative-valued signed type is implementation
+ defined. */
+ q = ~(~orig_t >> m);
+ /* The function expand_shift will choose between a shift
+ and a sequence of additions, so the observed cost is
+ given as MIN (m * add_cost[speed][mode],
+ shift_cost[speed][mode][m]). */
+ op_cost = m * add_cost[speed][mode];
+ if (shift_cost[speed][mode][m] < op_cost)
+ op_cost = shift_cost[speed][mode][m];
+ new_limit.cost = best_cost.cost - op_cost;
+ new_limit.latency = best_cost.latency - op_cost;
+ synth_mult (alg_in, q, &new_limit, mode);
+
+ alg_in->cost.cost += op_cost;
+ alg_in->cost.latency += op_cost;
+ if (CHEAPER_MULT_COST (&alg_in->cost, &best_cost))
+ {
+ struct algorithm *x;
+ best_cost = alg_in->cost;
+ x = alg_in, alg_in = best_alg, best_alg = x;
+ best_alg->log[best_alg->ops] = m;
+ best_alg->op[best_alg->ops] = alg_shift;
+ }
+ }
}
if (cache_hit)
goto done;
{
/* T ends with ...111. Multiply by (T + 1) and subtract 1. */
- op_cost = add_cost[mode];
+ op_cost = add_cost[speed][mode];
new_limit.cost = best_cost.cost - op_cost;
new_limit.latency = best_cost.latency - op_cost;
synth_mult (alg_in, t + 1, &new_limit, mode);
{
/* T ends with ...01 or ...011. Multiply by (T - 1) and add 1. */
- op_cost = add_cost[mode];
+ op_cost = add_cost[speed][mode];
new_limit.cost = best_cost.cost - op_cost;
new_limit.latency = best_cost.latency - op_cost;
synth_mult (alg_in, t - 1, &new_limit, mode);
best_alg->op[best_alg->ops] = alg_add_t_m2;
}
}
+
+ /* We may be able to calculate a * -7, a * -15, a * -31, etc
+ quickly with a - a * n for some appropriate constant n. */
+ m = exact_log2 (-orig_t + 1);
+ if (m >= 0 && m < maxm)
+ {
+ op_cost = shiftsub1_cost[speed][mode][m];
+ new_limit.cost = best_cost.cost - op_cost;
+ new_limit.latency = best_cost.latency - op_cost;
+ synth_mult (alg_in, (unsigned HOST_WIDE_INT) (-orig_t + 1) >> m, &new_limit, mode);
+
+ alg_in->cost.cost += op_cost;
+ alg_in->cost.latency += op_cost;
+ if (CHEAPER_MULT_COST (&alg_in->cost, &best_cost))
+ {
+ struct algorithm *x;
+ best_cost = alg_in->cost;
+ x = alg_in, alg_in = best_alg, best_alg = x;
+ best_alg->log[best_alg->ops] = m;
+ best_alg->op[best_alg->ops] = alg_sub_t_m2;
+ }
+ }
+
if (cache_hit)
goto done;
}
equal to its cost, otherwise assume that on superscalar
hardware the shift may be executed concurrently with the
earlier steps in the algorithm. */
- op_cost = add_cost[mode] + shift_cost[mode][m];
- if (shiftadd_cost[mode][m] < op_cost)
+ op_cost = add_cost[speed][mode] + shift_cost[speed][mode][m];
+ if (shiftadd_cost[speed][mode][m] < op_cost)
{
- op_cost = shiftadd_cost[mode][m];
+ op_cost = shiftadd_cost[speed][mode][m];
op_latency = op_cost;
}
else
- op_latency = add_cost[mode];
+ op_latency = add_cost[speed][mode];
new_limit.cost = best_cost.cost - op_cost;
new_limit.latency = best_cost.latency - op_latency;
equal to it's cost, otherwise assume that on superscalar
hardware the shift may be executed concurrently with the
earlier steps in the algorithm. */
- op_cost = add_cost[mode] + shift_cost[mode][m];
- if (shiftsub_cost[mode][m] < op_cost)
+ op_cost = add_cost[speed][mode] + shift_cost[speed][mode][m];
+ if (shiftsub0_cost[speed][mode][m] < op_cost)
{
- op_cost = shiftsub_cost[mode][m];
+ op_cost = shiftsub0_cost[speed][mode][m];
op_latency = op_cost;
}
else
- op_latency = add_cost[mode];
+ op_latency = add_cost[speed][mode];
new_limit.cost = best_cost.cost - op_cost;
new_limit.latency = best_cost.latency - op_latency;
m = exact_log2 (q);
if (m >= 0 && m < maxm)
{
- op_cost = shiftadd_cost[mode][m];
+ op_cost = shiftadd_cost[speed][mode][m];
new_limit.cost = best_cost.cost - op_cost;
new_limit.latency = best_cost.latency - op_cost;
synth_mult (alg_in, (t - 1) >> m, &new_limit, mode);
m = exact_log2 (q);
if (m >= 0 && m < maxm)
{
- op_cost = shiftsub_cost[mode][m];
+ op_cost = shiftsub0_cost[speed][mode][m];
new_limit.cost = best_cost.cost - op_cost;
new_limit.latency = best_cost.latency - op_cost;
synth_mult (alg_in, (t + 1) >> m, &new_limit, mode);
done:
/* If best_cost has not decreased, we have not found any algorithm. */
if (!CHEAPER_MULT_COST (&best_cost, cost_limit))
- return;
+ {
+ /* We failed to find an algorithm. Record alg_impossible for
+ this case (that is, <T, MODE, COST_LIMIT>) so that next time
+ we are asked to find an algorithm for T within the same or
+ lower COST_LIMIT, we can immediately return to the
+ caller. */
+ alg_hash[hash_index].t = t;
+ alg_hash[hash_index].mode = mode;
+ alg_hash[hash_index].speed = speed;
+ alg_hash[hash_index].alg = alg_impossible;
+ alg_hash[hash_index].cost = *cost_limit;
+ return;
+ }
/* Cache the result. */
if (!cache_hit)
{
alg_hash[hash_index].t = t;
alg_hash[hash_index].mode = mode;
+ alg_hash[hash_index].speed = speed;
alg_hash[hash_index].alg = best_alg->op[best_alg->ops];
+ alg_hash[hash_index].cost.cost = best_cost.cost;
+ alg_hash[hash_index].cost.latency = best_cost.latency;
}
/* If we are getting a too long sequence for `struct algorithm'
struct algorithm alg2;
struct mult_cost limit;
int op_cost;
+ bool speed = optimize_insn_for_speed_p ();
+
+ /* Fail quickly for impossible bounds. */
+ if (mult_cost < 0)
+ return false;
+
+ /* Ensure that mult_cost provides a reasonable upper bound.
+ Any constant multiplication can be performed with less
+ than 2 * bits additions. */
+ op_cost = 2 * GET_MODE_BITSIZE (mode) * add_cost[speed][mode];
+ if (mult_cost > op_cost)
+ mult_cost = op_cost;
*variant = basic_variant;
limit.cost = mult_cost;
`unsigned int' */
if (HOST_BITS_PER_INT >= GET_MODE_BITSIZE (mode))
{
- op_cost = neg_cost[mode];
+ op_cost = neg_cost[speed][mode];
if (MULT_COST_LESS (&alg->cost, mult_cost))
{
limit.cost = alg->cost.cost - op_cost;
}
/* This proves very useful for division-by-constant. */
- op_cost = add_cost[mode];
+ op_cost = add_cost[speed][mode];
if (MULT_COST_LESS (&alg->cost, mult_cost))
{
limit.cost = alg->cost.cost - op_cost;
int opno;
enum machine_mode nmode;
- /* Avoid referencing memory over and over.
- For speed, but also for correctness when mem is volatile. */
- if (MEM_P (op0))
- op0 = force_reg (mode, op0);
+ /* Avoid referencing memory over and over and invalid sharing
+ on SUBREGs. */
+ op0 = force_reg (mode, op0);
/* ACCUM starts out either as OP0 or as a zero, depending on
the first operation. */
insn = get_last_insn ();
set_unique_reg_note (insn, REG_EQUAL,
- gen_rtx_MULT (nmode, tem, GEN_INT (val_so_far)));
+ gen_rtx_MULT (nmode, tem,
+ GEN_INT (val_so_far)));
}
if (variant == negate_variant)
expand_mult (enum machine_mode mode, rtx op0, rtx op1, rtx target,
int unsignedp)
{
- rtx const_op1 = op1;
enum mult_variant variant;
struct algorithm algorithm;
+ int max_cost;
+ bool speed = optimize_insn_for_speed_p ();
- /* synth_mult does an `unsigned int' multiply. As long as the mode is
- less than or equal in size to `unsigned int' this doesn't matter.
- If the mode is larger than `unsigned int', then synth_mult works only
- if the constant value exactly fits in an `unsigned int' without any
- truncation. This means that multiplying by negative values does
- not work; results are off by 2^32 on a 32 bit machine. */
-
- /* If we are multiplying in DImode, it may still be a win
- to try to work with shifts and adds. */
- if (GET_CODE (op1) == CONST_DOUBLE
- && GET_MODE_CLASS (GET_MODE (op1)) == MODE_INT
- && HOST_BITS_PER_INT >= BITS_PER_WORD
- && CONST_DOUBLE_HIGH (op1) == 0)
- const_op1 = GEN_INT (CONST_DOUBLE_LOW (op1));
- else if (HOST_BITS_PER_INT < GET_MODE_BITSIZE (mode)
- && GET_CODE (op1) == CONST_INT
- && INTVAL (op1) < 0)
- const_op1 = 0;
-
- /* We used to test optimize here, on the grounds that it's better to
- produce a smaller program when -O is not used.
- But this causes such a terrible slowdown sometimes
- that it seems better to use synth_mult always. */
-
- if (const_op1 && GET_CODE (const_op1) == CONST_INT
+ /* Handling const0_rtx here allows us to use zero as a rogue value for
+ coeff below. */
+ if (op1 == const0_rtx)
+ return const0_rtx;
+ if (op1 == const1_rtx)
+ return op0;
+ if (op1 == constm1_rtx)
+ return expand_unop (mode,
+ GET_MODE_CLASS (mode) == MODE_INT
+ && !unsignedp && flag_trapv
+ ? negv_optab : neg_optab,
+ op0, target, 0);
+
+ /* These are the operations that are potentially turned into a sequence
+ of shifts and additions. */
+ if (SCALAR_INT_MODE_P (mode)
&& (unsignedp || !flag_trapv))
{
- HOST_WIDE_INT coeff = INTVAL (const_op1);
- int mult_cost;
+ HOST_WIDE_INT coeff = 0;
+ rtx fake_reg = gen_raw_REG (mode, LAST_VIRTUAL_REGISTER + 1);
- /* Special case powers of two. */
- if (EXACT_POWER_OF_2_OR_ZERO_P (coeff))
+ /* synth_mult does an `unsigned int' multiply. As long as the mode is
+ less than or equal in size to `unsigned int' this doesn't matter.
+ If the mode is larger than `unsigned int', then synth_mult works
+ only if the constant value exactly fits in an `unsigned int' without
+ any truncation. This means that multiplying by negative values does
+ not work; results are off by 2^32 on a 32 bit machine. */
+
+ if (CONST_INT_P (op1))
{
- if (coeff == 0)
- return const0_rtx;
- if (coeff == 1)
- return op0;
- return expand_shift (LSHIFT_EXPR, mode, op0,
- build_int_cst (NULL_TREE, floor_log2 (coeff)),
- target, unsignedp);
+ /* Attempt to handle multiplication of DImode values by negative
+ coefficients, by performing the multiplication by a positive
+ multiplier and then inverting the result. */
+ if (INTVAL (op1) < 0
+ && GET_MODE_BITSIZE (mode) > HOST_BITS_PER_WIDE_INT)
+ {
+ /* Its safe to use -INTVAL (op1) even for INT_MIN, as the
+ result is interpreted as an unsigned coefficient.
+ Exclude cost of op0 from max_cost to match the cost
+ calculation of the synth_mult. */
+ max_cost = rtx_cost (gen_rtx_MULT (mode, fake_reg, op1), SET, speed)
+ - neg_cost[speed][mode];
+ if (max_cost > 0
+ && choose_mult_variant (mode, -INTVAL (op1), &algorithm,
+ &variant, max_cost))
+ {
+ rtx temp = expand_mult_const (mode, op0, -INTVAL (op1),
+ NULL_RTX, &algorithm,
+ variant);
+ return expand_unop (mode, neg_optab, temp, target, 0);
+ }
+ }
+ else coeff = INTVAL (op1);
+ }
+ else if (GET_CODE (op1) == CONST_DOUBLE)
+ {
+ /* If we are multiplying in DImode, it may still be a win
+ to try to work with shifts and adds. */
+ if (CONST_DOUBLE_HIGH (op1) == 0
+ && CONST_DOUBLE_LOW (op1) > 0)
+ coeff = CONST_DOUBLE_LOW (op1);
+ else if (CONST_DOUBLE_LOW (op1) == 0
+ && EXACT_POWER_OF_2_OR_ZERO_P (CONST_DOUBLE_HIGH (op1)))
+ {
+ int shift = floor_log2 (CONST_DOUBLE_HIGH (op1))
+ + HOST_BITS_PER_WIDE_INT;
+ return expand_shift (LSHIFT_EXPR, mode, op0,
+ build_int_cst (NULL_TREE, shift),
+ target, unsignedp);
+ }
}
- mult_cost = rtx_cost (gen_rtx_MULT (mode, op0, op1), SET);
- if (choose_mult_variant (mode, coeff, &algorithm, &variant,
- mult_cost))
- return expand_mult_const (mode, op0, coeff, target,
- &algorithm, variant);
+ /* We used to test optimize here, on the grounds that it's better to
+ produce a smaller program when -O is not used. But this causes
+ such a terrible slowdown sometimes that it seems better to always
+ use synth_mult. */
+ if (coeff != 0)
+ {
+ /* Special case powers of two. */
+ if (EXACT_POWER_OF_2_OR_ZERO_P (coeff))
+ return expand_shift (LSHIFT_EXPR, mode, op0,
+ build_int_cst (NULL_TREE, floor_log2 (coeff)),
+ target, unsignedp);
+
+ /* Exclude cost of op0 from max_cost to match the cost
+ calculation of the synth_mult. */
+ max_cost = rtx_cost (gen_rtx_MULT (mode, fake_reg, op1), SET, speed);
+ if (choose_mult_variant (mode, coeff, &algorithm, &variant,
+ max_cost))
+ return expand_mult_const (mode, op0, coeff, target,
+ &algorithm, variant);
+ }
}
if (GET_CODE (op0) == CONST_DOUBLE)
/* Expand x*2.0 as x+x. */
if (GET_CODE (op1) == CONST_DOUBLE
- && GET_MODE_CLASS (mode) == MODE_FLOAT)
+ && SCALAR_FLOAT_MODE_P (mode))
{
REAL_VALUE_TYPE d;
REAL_VALUE_FROM_CONST_DOUBLE (d, op1);
gcc_assert (op0);
return op0;
}
+
+/* Perform a widening multiplication and return an rtx for the result.
+ MODE is mode of value; OP0 and OP1 are what to multiply (rtx's);
+ TARGET is a suggestion for where to store the result (an rtx).
+ THIS_OPTAB is the optab we should use, it must be either umul_widen_optab
+ or smul_widen_optab.
+
+ We check specially for a constant integer as OP1, comparing the
+ cost of a widening multiply against the cost of a sequence of shifts
+ and adds. */
+
+rtx
+expand_widening_mult (enum machine_mode mode, rtx op0, rtx op1, rtx target,
+ int unsignedp, optab this_optab)
+{
+ bool speed = optimize_insn_for_speed_p ();
+
+ if (CONST_INT_P (op1)
+ && (INTVAL (op1) >= 0
+ || GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_WIDE_INT))
+ {
+ HOST_WIDE_INT coeff = INTVAL (op1);
+ int max_cost;
+ enum mult_variant variant;
+ struct algorithm algorithm;
+
+ /* Special case powers of two. */
+ if (EXACT_POWER_OF_2_OR_ZERO_P (coeff))
+ {
+ op0 = convert_to_mode (mode, op0, this_optab == umul_widen_optab);
+ return expand_shift (LSHIFT_EXPR, mode, op0,
+ build_int_cst (NULL_TREE, floor_log2 (coeff)),
+ target, unsignedp);
+ }
+
+ /* Exclude cost of op0 from max_cost to match the cost
+ calculation of the synth_mult. */
+ max_cost = mul_widen_cost[speed][mode];
+ if (choose_mult_variant (mode, coeff, &algorithm, &variant,
+ max_cost))
+ {
+ op0 = convert_to_mode (mode, op0, this_optab == umul_widen_optab);
+ return expand_mult_const (mode, op0, coeff, target,
+ &algorithm, variant);
+ }
+ }
+ return expand_binop (mode, this_optab, op0, op1, target,
+ unsignedp, OPTAB_LIB_WIDEN);
+}
\f
/* Return the smallest n such that 2**n >= X. */
if (mode == word_mode)
return gen_highpart (mode, op);
+ gcc_assert (!SCALAR_FLOAT_MODE_P (mode));
+
wider_mode = GET_MODE_WIDER_MODE (mode);
op = expand_shift (RSHIFT_EXPR, wider_mode, op,
build_int_cst (NULL_TREE, GET_MODE_BITSIZE (mode)), 0, 1);
optab moptab;
rtx tem;
int size;
+ bool speed = optimize_insn_for_speed_p ();
+
+ gcc_assert (!SCALAR_FLOAT_MODE_P (mode));
wider_mode = GET_MODE_WIDER_MODE (mode);
size = GET_MODE_BITSIZE (mode);
/* Firstly, try using a multiplication insn that only generates the needed
high part of the product, and in the sign flavor of unsignedp. */
- if (mul_highpart_cost[mode] < max_cost)
+ if (mul_highpart_cost[speed][mode] < max_cost)
{
moptab = unsignedp ? umul_highpart_optab : smul_highpart_optab;
tem = expand_binop (mode, moptab, op0, narrow_op1, target,
/* Secondly, same as above, but use sign flavor opposite of unsignedp.
Need to adjust the result after the multiplication. */
if (size - 1 < BITS_PER_WORD
- && (mul_highpart_cost[mode] + 2 * shift_cost[mode][size-1]
- + 4 * add_cost[mode] < max_cost))
+ && (mul_highpart_cost[speed][mode] + 2 * shift_cost[speed][mode][size-1]
+ + 4 * add_cost[speed][mode] < max_cost))
{
moptab = unsignedp ? smul_highpart_optab : umul_highpart_optab;
tem = expand_binop (mode, moptab, op0, narrow_op1, target,
/* Try widening multiplication. */
moptab = unsignedp ? umul_widen_optab : smul_widen_optab;
- if (moptab->handlers[wider_mode].insn_code != CODE_FOR_nothing
- && mul_widen_cost[wider_mode] < max_cost)
+ if (optab_handler (moptab, wider_mode)->insn_code != CODE_FOR_nothing
+ && mul_widen_cost[speed][wider_mode] < max_cost)
{
tem = expand_binop (wider_mode, moptab, op0, narrow_op1, 0,
unsignedp, OPTAB_WIDEN);
}
/* Try widening the mode and perform a non-widening multiplication. */
- if (smul_optab->handlers[wider_mode].insn_code != CODE_FOR_nothing
+ if (optab_handler (smul_optab, wider_mode)->insn_code != CODE_FOR_nothing
&& size - 1 < BITS_PER_WORD
- && mul_cost[wider_mode] + shift_cost[mode][size-1] < max_cost)
+ && mul_cost[speed][wider_mode] + shift_cost[speed][mode][size-1] < max_cost)
{
rtx insns, wop0, wop1;
/* Try widening multiplication of opposite signedness, and adjust. */
moptab = unsignedp ? smul_widen_optab : umul_widen_optab;
- if (moptab->handlers[wider_mode].insn_code != CODE_FOR_nothing
+ if (optab_handler (moptab, wider_mode)->insn_code != CODE_FOR_nothing
&& size - 1 < BITS_PER_WORD
- && (mul_widen_cost[wider_mode] + 2 * shift_cost[mode][size-1]
- + 4 * add_cost[mode] < max_cost))
+ && (mul_widen_cost[speed][wider_mode] + 2 * shift_cost[speed][mode][size-1]
+ + 4 * add_cost[speed][mode] < max_cost))
{
tem = expand_binop (wider_mode, moptab, op0, narrow_op1,
NULL_RTX, ! unsignedp, OPTAB_WIDEN);
enum mult_variant variant;
struct algorithm alg;
rtx tem;
+ bool speed = optimize_insn_for_speed_p ();
+ gcc_assert (!SCALAR_FLOAT_MODE_P (mode));
/* We can't support modes wider than HOST_BITS_PER_INT. */
gcc_assert (GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_WIDE_INT);
cnst1 = INTVAL (op1) & GET_MODE_MASK (mode);
- /* We can't optimize modes wider than BITS_PER_WORD.
- ??? We might be able to perform double-word arithmetic if
+ /* We can't optimize modes wider than BITS_PER_WORD.
+ ??? We might be able to perform double-word arithmetic if
mode == word_mode, however all the cost calculations in
synth_mult etc. assume single-word operations. */
if (GET_MODE_BITSIZE (wider_mode) > BITS_PER_WORD)
return expand_mult_highpart_optab (mode, op0, op1, target,
unsignedp, max_cost);
- extra_cost = shift_cost[mode][GET_MODE_BITSIZE (mode) - 1];
+ extra_cost = shift_cost[speed][mode][GET_MODE_BITSIZE (mode) - 1];
/* Check whether we try to multiply by a negative constant. */
if (!unsignedp && ((cnst1 >> (GET_MODE_BITSIZE (mode) - 1)) & 1))
{
sign_adjust = true;
- extra_cost += add_cost[mode];
+ extra_cost += add_cost[speed][mode];
}
/* See whether shift/add multiplication is cheap enough. */
result = gen_reg_rtx (mode);
/* Avoid conditional branches when they're expensive. */
- if (BRANCH_COST >= 2
- && !optimize_size)
+ if (BRANCH_COST (optimize_insn_for_speed_p (), false) >= 2
+ && optimize_insn_for_speed_p ())
{
rtx signmask = emit_store_flag (result, LT, op0, const0_rtx,
mode, 0, -1);
use a LSHIFTRT, 1 ADD, 1 SUB and an AND. */
temp = gen_rtx_LSHIFTRT (mode, result, shift);
- if (lshr_optab->handlers[mode].insn_code == CODE_FOR_nothing
- || rtx_cost (temp, SET) > COSTS_N_INSNS (2))
+ if (optab_handler (lshr_optab, mode)->insn_code == CODE_FOR_nothing
+ || rtx_cost (temp, SET, optimize_insn_for_speed_p ()) > COSTS_N_INSNS (2))
{
temp = expand_binop (mode, xor_optab, op0, signmask,
NULL_RTX, 1, OPTAB_LIB_WIDEN);
logd = floor_log2 (d);
shift = build_int_cst (NULL_TREE, logd);
- if (d == 2 && BRANCH_COST >= 1)
+ if (d == 2
+ && BRANCH_COST (optimize_insn_for_speed_p (),
+ false) >= 1)
{
temp = gen_reg_rtx (mode);
temp = emit_store_flag (temp, LT, op0, const0_rtx, mode, 0, 1);
}
#ifdef HAVE_conditional_move
- if (BRANCH_COST >= 2)
+ if (BRANCH_COST (optimize_insn_for_speed_p (), false)
+ >= 2)
{
rtx temp2;
}
#endif
- if (BRANCH_COST >= 2)
+ if (BRANCH_COST (optimize_insn_for_speed_p (),
+ false) >= 2)
{
int ushift = GET_MODE_BITSIZE (mode) - logd;
temp = gen_reg_rtx (mode);
temp = emit_store_flag (temp, LT, op0, const0_rtx, mode, 0, -1);
- if (shift_cost[mode][ushift] > COSTS_N_INSNS (1))
+ if (shift_cost[optimize_insn_for_speed_p ()][mode][ushift] > COSTS_N_INSNS (1))
temp = expand_binop (mode, and_optab, temp, GEN_INT (d - 1),
NULL_RTX, 0, OPTAB_LIB_WIDEN);
else
int max_cost, extra_cost;
static HOST_WIDE_INT last_div_const = 0;
static HOST_WIDE_INT ext_op1;
+ bool speed = optimize_insn_for_speed_p ();
- op1_is_constant = GET_CODE (op1) == CONST_INT;
+ op1_is_constant = CONST_INT_P (op1);
if (op1_is_constant)
{
ext_op1 = INTVAL (op1);
for (compute_mode = mode; compute_mode != VOIDmode;
compute_mode = GET_MODE_WIDER_MODE (compute_mode))
- if (optab1->handlers[compute_mode].insn_code != CODE_FOR_nothing
- || optab2->handlers[compute_mode].insn_code != CODE_FOR_nothing)
+ if (optab_handler (optab1, compute_mode)->insn_code != CODE_FOR_nothing
+ || optab_handler (optab2, compute_mode)->insn_code != CODE_FOR_nothing)
break;
if (compute_mode == VOIDmode)
for (compute_mode = mode; compute_mode != VOIDmode;
compute_mode = GET_MODE_WIDER_MODE (compute_mode))
- if (optab1->handlers[compute_mode].libfunc
- || optab2->handlers[compute_mode].libfunc)
+ if (optab_libfunc (optab1, compute_mode)
+ || optab_libfunc (optab2, compute_mode))
break;
- /* If we still couldn't find a mode, use MODE, but we'll probably abort
- in expand_binop. */
+ /* If we still couldn't find a mode, use MODE, but expand_binop will
+ probably die. */
if (compute_mode == VOIDmode)
compute_mode = mode;
/* Only deduct something for a REM if the last divide done was
for a different constant. Then set the constant of the last
divide. */
- max_cost = div_cost[compute_mode]
- - (rem_flag && ! (last_div_const != 0 && op1_is_constant
- && INTVAL (op1) == last_div_const)
- ? mul_cost[compute_mode] + add_cost[compute_mode]
- : 0);
+ max_cost = unsignedp ? udiv_cost[speed][compute_mode] : sdiv_cost[speed][compute_mode];
+ if (rem_flag && ! (last_div_const != 0 && op1_is_constant
+ && INTVAL (op1) == last_div_const))
+ max_cost -= mul_cost[speed][compute_mode] + add_cost[speed][compute_mode];
last_div_const = ! rem_flag && op1_is_constant ? INTVAL (op1) : 0;
/* convert_modes may have placed op1 into a register, so we
must recompute the following. */
- op1_is_constant = GET_CODE (op1) == CONST_INT;
+ op1_is_constant = CONST_INT_P (op1);
op1_is_pow2 = (op1_is_constant
&& ((EXACT_POWER_OF_2_OR_ZERO_P (INTVAL (op1))
|| (! unsignedp
{
/* Most significant bit of divisor is set; emit an scc
insn. */
- quotient = emit_store_flag (tquotient, GEU, op0, op1,
- compute_mode, 1, 1);
- if (quotient == 0)
- goto fail1;
+ quotient = emit_store_flag_force (tquotient, GEU, op0, op1,
+ compute_mode, 1, 1);
}
else
{
goto fail1;
extra_cost
- = (shift_cost[compute_mode][post_shift - 1]
- + shift_cost[compute_mode][1]
- + 2 * add_cost[compute_mode]);
+ = (shift_cost[speed][compute_mode][post_shift - 1]
+ + shift_cost[speed][compute_mode][1]
+ + 2 * add_cost[speed][compute_mode]);
t1 = expand_mult_highpart (compute_mode, op0, ml,
NULL_RTX, 1,
max_cost - extra_cost);
build_int_cst (NULL_TREE, pre_shift),
NULL_RTX, 1);
extra_cost
- = (shift_cost[compute_mode][pre_shift]
- + shift_cost[compute_mode][post_shift]);
+ = (shift_cost[speed][compute_mode][pre_shift]
+ + shift_cost[speed][compute_mode][post_shift]);
t2 = expand_mult_highpart (compute_mode, t1, ml,
NULL_RTX, 1,
max_cost - extra_cost);
int lgup, post_shift;
rtx mlr;
HOST_WIDE_INT d = INTVAL (op1);
- unsigned HOST_WIDE_INT abs_d = d >= 0 ? d : -d;
+ unsigned HOST_WIDE_INT abs_d;
+
+ /* Since d might be INT_MIN, we have to cast to
+ unsigned HOST_WIDE_INT before negating to avoid
+ undefined signed overflow. */
+ abs_d = (d >= 0
+ ? (unsigned HOST_WIDE_INT) d
+ : - (unsigned HOST_WIDE_INT) d);
/* n rem d = n rem -d */
if (rem_flag && d < 0)
else if (d == -1)
quotient = expand_unop (compute_mode, neg_optab, op0,
tquotient, 0);
- else if (abs_d == (unsigned HOST_WIDE_INT) 1 << (size - 1))
+ else if (HOST_BITS_PER_WIDE_INT >= size
+ && abs_d == (unsigned HOST_WIDE_INT) 1 << (size - 1))
{
/* This case is not handled correctly below. */
quotient = emit_store_flag (tquotient, EQ, op0, op1,
goto fail1;
}
else if (EXACT_POWER_OF_2_OR_ZERO_P (d)
- && (rem_flag ? smod_pow2_cheap[compute_mode]
- : sdiv_pow2_cheap[compute_mode])
+ && (rem_flag ? smod_pow2_cheap[speed][compute_mode]
+ : sdiv_pow2_cheap[speed][compute_mode])
/* We assume that cheap metric is true if the
optab has an expander for this mode. */
- && (((rem_flag ? smod_optab : sdiv_optab)
- ->handlers[compute_mode].insn_code
+ && ((optab_handler ((rem_flag ? smod_optab
+ : sdiv_optab),
+ compute_mode)->insn_code
!= CODE_FOR_nothing)
- || (sdivmod_optab->handlers[compute_mode]
- .insn_code != CODE_FOR_nothing)))
+ || (optab_handler(sdivmod_optab,
+ compute_mode)
+ ->insn_code != CODE_FOR_nothing)))
;
else if (EXACT_POWER_OF_2_OR_ZERO_P (abs_d))
{
return gen_lowpart (mode, remainder);
}
- if (sdiv_pow2_cheap[compute_mode]
- && ((sdiv_optab->handlers[compute_mode].insn_code
+ if (sdiv_pow2_cheap[speed][compute_mode]
+ && ((optab_handler (sdiv_optab, compute_mode)->insn_code
!= CODE_FOR_nothing)
- || (sdivmod_optab->handlers[compute_mode].insn_code
+ || (optab_handler (sdivmod_optab, compute_mode)->insn_code
!= CODE_FOR_nothing)))
quotient = expand_divmod (0, TRUNC_DIV_EXPR,
compute_mode, op0,
|| size - 1 >= BITS_PER_WORD)
goto fail1;
- extra_cost = (shift_cost[compute_mode][post_shift]
- + shift_cost[compute_mode][size - 1]
- + add_cost[compute_mode]);
+ extra_cost = (shift_cost[speed][compute_mode][post_shift]
+ + shift_cost[speed][compute_mode][size - 1]
+ + add_cost[speed][compute_mode]);
t1 = expand_mult_highpart (compute_mode, op0, mlr,
NULL_RTX, 0,
max_cost - extra_cost);
ml |= (~(unsigned HOST_WIDE_INT) 0) << (size - 1);
mlr = gen_int_mode (ml, compute_mode);
- extra_cost = (shift_cost[compute_mode][post_shift]
- + shift_cost[compute_mode][size - 1]
- + 2 * add_cost[compute_mode]);
+ extra_cost = (shift_cost[speed][compute_mode][post_shift]
+ + shift_cost[speed][compute_mode][size - 1]
+ + 2 * add_cost[speed][compute_mode]);
t1 = expand_mult_highpart (compute_mode, op0, mlr,
NULL_RTX, 0,
max_cost - extra_cost);
NULL_RTX, 0);
t2 = expand_binop (compute_mode, xor_optab, op0, t1,
NULL_RTX, 0, OPTAB_WIDEN);
- extra_cost = (shift_cost[compute_mode][post_shift]
- + shift_cost[compute_mode][size - 1]
- + 2 * add_cost[compute_mode]);
+ extra_cost = (shift_cost[speed][compute_mode][post_shift]
+ + shift_cost[speed][compute_mode][size - 1]
+ + 2 * add_cost[speed][compute_mode]);
t3 = expand_mult_highpart (compute_mode, t2, ml,
NULL_RTX, 1,
max_cost - extra_cost);
= sign_expand_binop (compute_mode, umod_optab, smod_optab,
op0, op1, target,
unsignedp,
- ((optab2->handlers[compute_mode].insn_code
+ ((optab_handler (optab2, compute_mode)->insn_code
!= CODE_FOR_nothing)
? OPTAB_DIRECT : OPTAB_WIDEN));
if (remainder == 0)
= sign_expand_binop (compute_mode, udiv_optab, sdiv_optab,
op0, op1, rem_flag ? NULL_RTX : target,
unsignedp,
- ((optab2->handlers[compute_mode].insn_code
+ ((optab_handler (optab2, compute_mode)->insn_code
!= CODE_FOR_nothing)
? OPTAB_DIRECT : OPTAB_WIDEN));
if (!remainder)
{
remainder = gen_reg_rtx (compute_mode);
- if (!expand_twoval_binop_libfunc
+ if (!expand_twoval_binop_libfunc
(unsignedp ? udivmod_optab : sdivmod_optab,
op0, op1,
NULL_RTX, remainder,
&& (GET_MODE_BITSIZE (TYPE_MODE (type))
< HOST_BITS_PER_WIDE_INT)))
hi = -1;
-
+
t = build_int_cst_wide (type, INTVAL (x), hi);
-
+
return t;
}
-
+
case CONST_DOUBLE:
if (GET_MODE (x) == VOIDmode)
t = build_int_cst_wide (type,
case CONST_VECTOR:
{
- int i, units;
- rtx elt;
+ int units = CONST_VECTOR_NUNITS (x);
+ tree itype = TREE_TYPE (type);
tree t = NULL_TREE;
+ int i;
- units = CONST_VECTOR_NUNITS (x);
/* Build a tree with vector elements. */
for (i = units - 1; i >= 0; --i)
{
- elt = CONST_VECTOR_ELT (x, i);
- t = tree_cons (NULL_TREE, make_tree (type, elt), t);
+ rtx elt = CONST_VECTOR_ELT (x, i);
+ t = tree_cons (NULL_TREE, make_tree (itype, elt), t);
}
return build_vector (type, t);
}
case PLUS:
- return fold (build2 (PLUS_EXPR, type, make_tree (type, XEXP (x, 0)),
- make_tree (type, XEXP (x, 1))));
+ return fold_build2 (PLUS_EXPR, type, make_tree (type, XEXP (x, 0)),
+ make_tree (type, XEXP (x, 1)));
case MINUS:
- return fold (build2 (MINUS_EXPR, type, make_tree (type, XEXP (x, 0)),
- make_tree (type, XEXP (x, 1))));
+ return fold_build2 (MINUS_EXPR, type, make_tree (type, XEXP (x, 0)),
+ make_tree (type, XEXP (x, 1)));
case NEG:
- return fold (build1 (NEGATE_EXPR, type, make_tree (type, XEXP (x, 0))));
+ return fold_build1 (NEGATE_EXPR, type, make_tree (type, XEXP (x, 0)));
case MULT:
- return fold (build2 (MULT_EXPR, type, make_tree (type, XEXP (x, 0)),
- make_tree (type, XEXP (x, 1))));
+ return fold_build2 (MULT_EXPR, type, make_tree (type, XEXP (x, 0)),
+ make_tree (type, XEXP (x, 1)));
case ASHIFT:
- return fold (build2 (LSHIFT_EXPR, type, make_tree (type, XEXP (x, 0)),
- make_tree (type, XEXP (x, 1))));
+ return fold_build2 (LSHIFT_EXPR, type, make_tree (type, XEXP (x, 0)),
+ make_tree (type, XEXP (x, 1)));
case LSHIFTRT:
- t = lang_hooks.types.unsigned_type (type);
+ t = unsigned_type_for (type);
return fold_convert (type, build2 (RSHIFT_EXPR, t,
make_tree (t, XEXP (x, 0)),
make_tree (type, XEXP (x, 1))));
case ASHIFTRT:
- t = lang_hooks.types.signed_type (type);
+ t = signed_type_for (type);
return fold_convert (type, build2 (RSHIFT_EXPR, t,
make_tree (t, XEXP (x, 0)),
make_tree (type, XEXP (x, 1))));
case DIV:
if (TREE_CODE (type) != REAL_TYPE)
- t = lang_hooks.types.signed_type (type);
+ t = signed_type_for (type);
else
t = type;
make_tree (t, XEXP (x, 0)),
make_tree (t, XEXP (x, 1))));
case UDIV:
- t = lang_hooks.types.unsigned_type (type);
+ t = unsigned_type_for (type);
return fold_convert (type, build2 (TRUNC_DIV_EXPR, t,
make_tree (t, XEXP (x, 0)),
make_tree (t, XEXP (x, 1))));
GET_CODE (x) == ZERO_EXTEND);
return fold_convert (type, make_tree (t, XEXP (x, 0)));
+ case CONST:
+ return make_tree (type, XEXP (x, 0));
+
+ case SYMBOL_REF:
+ t = SYMBOL_REF_DECL (x);
+ if (t)
+ return fold_convert (type, build_fold_addr_expr (t));
+ /* else fall through. */
+
default:
- t = build_decl (VAR_DECL, NULL_TREE, type);
+ t = build_decl (RTL_LOCATION (x), VAR_DECL, NULL_TREE, type);
- /* If TYPE is a POINTER_TYPE, X might be Pmode with TYPE_MODE being
- ptr_mode. So convert. */
+ /* If TYPE is a POINTER_TYPE, we might need to convert X from
+ address mode to pointer mode. */
if (POINTER_TYPE_P (type))
- x = convert_memory_address (TYPE_MODE (type), x);
+ x = convert_memory_address_addr_space
+ (TYPE_MODE (type), x, TYPE_ADDR_SPACE (TREE_TYPE (type)));
/* Note that we do *not* use SET_DECL_RTL here, because we do not
want set_decl_rtl to go adjusting REG_ATTRS for this temporary. */
- t->decl.rtl = x;
+ t->decl_with_rtl.rtl = x;
return t;
}
}
-
-/* Check whether the multiplication X * MULT + ADD overflows.
- X, MULT and ADD must be CONST_*.
- MODE is the machine mode for the computation.
- X and MULT must have mode MODE. ADD may have a different mode.
- So can X (defaults to same as MODE).
- UNSIGNEDP is nonzero to do unsigned multiplication. */
-
-bool
-const_mult_add_overflow_p (rtx x, rtx mult, rtx add,
- enum machine_mode mode, int unsignedp)
-{
- tree type, mult_type, add_type, result;
-
- type = lang_hooks.types.type_for_mode (mode, unsignedp);
-
- /* In order to get a proper overflow indication from an unsigned
- type, we have to pretend that it's a sizetype. */
- mult_type = type;
- if (unsignedp)
- {
- /* FIXME:It would be nice if we could step directly from this
- type to its sizetype equivalent. */
- mult_type = build_distinct_type_copy (type);
- TYPE_IS_SIZETYPE (mult_type) = 1;
- }
-
- add_type = (GET_MODE (add) == VOIDmode ? mult_type
- : lang_hooks.types.type_for_mode (GET_MODE (add), unsignedp));
-
- result = fold (build2 (PLUS_EXPR, mult_type,
- fold (build2 (MULT_EXPR, mult_type,
- make_tree (mult_type, x),
- make_tree (mult_type, mult))),
- make_tree (add_type, add)));
-
- return TREE_CONSTANT_OVERFLOW (result);
-}
-
-/* Return an rtx representing the value of X * MULT + ADD.
- TARGET is a suggestion for where to store the result (an rtx).
- MODE is the machine mode for the computation.
- X and MULT must have mode MODE. ADD may have a different mode.
- So can X (defaults to same as MODE).
- UNSIGNEDP is nonzero to do unsigned multiplication.
- This may emit insns. */
-
-rtx
-expand_mult_add (rtx x, rtx target, rtx mult, rtx add, enum machine_mode mode,
- int unsignedp)
-{
- tree type = lang_hooks.types.type_for_mode (mode, unsignedp);
- tree add_type = (GET_MODE (add) == VOIDmode
- ? type: lang_hooks.types.type_for_mode (GET_MODE (add),
- unsignedp));
- tree result = fold (build2 (PLUS_EXPR, type,
- fold (build2 (MULT_EXPR, type,
- make_tree (type, x),
- make_tree (type, mult))),
- make_tree (add_type, add)));
-
- return expand_expr (result, target, VOIDmode, 0);
-}
\f
/* Compute the logical-and of OP0 and OP1, storing it in TARGET
and returning TARGET.
emit_move_insn (target, tem);
return target;
}
-\f
-/* Emit a store-flags instruction for comparison CODE on OP0 and OP1
- and storing in TARGET. Normally return TARGET.
- Return 0 if that cannot be done.
- MODE is the mode to use for OP0 and OP1 should they be CONST_INTs. If
- it is VOIDmode, they cannot both be CONST_INT.
+/* Helper function for emit_store_flag. */
+static rtx
+emit_cstore (rtx target, enum insn_code icode, enum rtx_code code,
+ enum machine_mode mode, enum machine_mode compare_mode,
+ int unsignedp, rtx x, rtx y, int normalizep,
+ enum machine_mode target_mode)
+{
+ rtx op0, last, comparison, subtarget, pattern;
+ enum machine_mode result_mode = insn_data[(int) icode].operand[0].mode;
- UNSIGNEDP is for the case where we have to widen the operands
- to perform the operation. It says to use zero-extension.
+ last = get_last_insn ();
+ x = prepare_operand (icode, x, 2, mode, compare_mode, unsignedp);
+ y = prepare_operand (icode, y, 3, mode, compare_mode, unsignedp);
+ comparison = gen_rtx_fmt_ee (code, result_mode, x, y);
+ if (!x || !y
+ || !insn_data[icode].operand[2].predicate
+ (x, insn_data[icode].operand[2].mode)
+ || !insn_data[icode].operand[3].predicate
+ (y, insn_data[icode].operand[3].mode)
+ || !insn_data[icode].operand[1].predicate (comparison, VOIDmode))
+ {
+ delete_insns_since (last);
+ return NULL_RTX;
+ }
- NORMALIZEP is 1 if we should convert the result to be either zero
- or one. Normalize is -1 if we should convert the result to be
- either zero or -1. If NORMALIZEP is zero, the result will be left
- "raw" out of the scc insn. */
+ if (target_mode == VOIDmode)
+ target_mode = result_mode;
+ if (!target)
+ target = gen_reg_rtx (target_mode);
-rtx
-emit_store_flag (rtx target, enum rtx_code code, rtx op0, rtx op1,
- enum machine_mode mode, int unsignedp, int normalizep)
+ if (optimize
+ || !(insn_data[(int) icode].operand[0].predicate (target, result_mode)))
+ subtarget = gen_reg_rtx (result_mode);
+ else
+ subtarget = target;
+
+ pattern = GEN_FCN (icode) (subtarget, comparison, x, y);
+ if (!pattern)
+ return NULL_RTX;
+ emit_insn (pattern);
+
+ /* If we are converting to a wider mode, first convert to
+ TARGET_MODE, then normalize. This produces better combining
+ opportunities on machines that have a SIGN_EXTRACT when we are
+ testing a single bit. This mostly benefits the 68k.
+
+ If STORE_FLAG_VALUE does not have the sign bit set when
+ interpreted in MODE, we can do this conversion as unsigned, which
+ is usually more efficient. */
+ if (GET_MODE_SIZE (target_mode) > GET_MODE_SIZE (result_mode))
+ {
+ convert_move (target, subtarget,
+ (GET_MODE_BITSIZE (result_mode) <= HOST_BITS_PER_WIDE_INT)
+ && 0 == (STORE_FLAG_VALUE
+ & ((HOST_WIDE_INT) 1
+ << (GET_MODE_BITSIZE (result_mode) -1))));
+ op0 = target;
+ result_mode = target_mode;
+ }
+ else
+ op0 = subtarget;
+
+ /* If we want to keep subexpressions around, don't reuse our last
+ target. */
+ if (optimize)
+ subtarget = 0;
+
+ /* Now normalize to the proper value in MODE. Sometimes we don't
+ have to do anything. */
+ if (normalizep == 0 || normalizep == STORE_FLAG_VALUE)
+ ;
+ /* STORE_FLAG_VALUE might be the most negative number, so write
+ the comparison this way to avoid a compiler-time warning. */
+ else if (- normalizep == STORE_FLAG_VALUE)
+ op0 = expand_unop (result_mode, neg_optab, op0, subtarget, 0);
+
+ /* We don't want to use STORE_FLAG_VALUE < 0 below since this makes
+ it hard to use a value of just the sign bit due to ANSI integer
+ constant typing rules. */
+ else if (GET_MODE_BITSIZE (result_mode) <= HOST_BITS_PER_WIDE_INT
+ && (STORE_FLAG_VALUE
+ & ((HOST_WIDE_INT) 1 << (GET_MODE_BITSIZE (result_mode) - 1))))
+ op0 = expand_shift (RSHIFT_EXPR, result_mode, op0,
+ size_int (GET_MODE_BITSIZE (result_mode) - 1), subtarget,
+ normalizep == 1);
+ else
+ {
+ gcc_assert (STORE_FLAG_VALUE & 1);
+
+ op0 = expand_and (result_mode, op0, const1_rtx, subtarget);
+ if (normalizep == -1)
+ op0 = expand_unop (result_mode, neg_optab, op0, op0, 0);
+ }
+
+ /* If we were converting to a smaller mode, do the conversion now. */
+ if (target_mode != result_mode)
+ {
+ convert_move (target, op0, 0);
+ return target;
+ }
+ else
+ return op0;
+}
+
+
+/* A subroutine of emit_store_flag only including "tricks" that do not
+ need a recursive call. These are kept separate to avoid infinite
+ loops. */
+
+static rtx
+emit_store_flag_1 (rtx target, enum rtx_code code, rtx op0, rtx op1,
+ enum machine_mode mode, int unsignedp, int normalizep,
+ enum machine_mode target_mode)
{
rtx subtarget;
enum insn_code icode;
enum machine_mode compare_mode;
- enum machine_mode target_mode = GET_MODE (target);
+ enum mode_class mclass;
+ enum rtx_code scode;
rtx tem;
- rtx last = get_last_insn ();
- rtx pattern, comparison;
if (unsignedp)
code = unsigned_condition (code);
+ scode = swap_condition (code);
/* If one operand is constant, make it the second one. Only do this
if the other operand is not constant as well. */
if ((code == EQ || code == NE)
&& (op1 == const0_rtx || op1 == constm1_rtx))
{
- rtx op00, op01, op0both;
+ rtx op00, op01;
- /* Do a logical OR or AND of the two words and compare the result. */
+ /* Do a logical OR or AND of the two words and compare the
+ result. */
op00 = simplify_gen_subreg (word_mode, op0, mode, 0);
op01 = simplify_gen_subreg (word_mode, op0, mode, UNITS_PER_WORD);
- op0both = expand_binop (word_mode,
- op1 == const0_rtx ? ior_optab : and_optab,
- op00, op01, NULL_RTX, unsignedp, OPTAB_DIRECT);
-
- if (op0both != 0)
- return emit_store_flag (target, code, op0both, op1, word_mode,
- unsignedp, normalizep);
+ tem = expand_binop (word_mode,
+ op1 == const0_rtx ? ior_optab : and_optab,
+ op00, op01, NULL_RTX, unsignedp,
+ OPTAB_DIRECT);
+
+ if (tem != 0)
+ tem = emit_store_flag (NULL_RTX, code, tem, op1, word_mode,
+ unsignedp, normalizep);
}
else if ((code == LT || code == GE) && op1 == const0_rtx)
{
/* If testing the sign bit, can just test on high word. */
op0h = simplify_gen_subreg (word_mode, op0, mode,
- subreg_highpart_offset (word_mode, mode));
- return emit_store_flag (target, code, op0h, op1, word_mode,
- unsignedp, normalizep);
+ subreg_highpart_offset (word_mode,
+ mode));
+ tem = emit_store_flag (NULL_RTX, code, op0h, op1, word_mode,
+ unsignedp, normalizep);
}
- }
+ else
+ tem = NULL_RTX;
- /* From now on, we won't change CODE, so set ICODE now. */
- icode = setcc_gen_code[(int) code];
+ if (tem)
+ {
+ if (target_mode == VOIDmode || GET_MODE (tem) == target_mode)
+ return tem;
+ if (!target)
+ target = gen_reg_rtx (target_mode);
+
+ convert_move (target, tem,
+ 0 == ((normalizep ? normalizep : STORE_FLAG_VALUE)
+ & ((HOST_WIDE_INT) 1
+ << (GET_MODE_BITSIZE (word_mode) -1))));
+ return target;
+ }
+ }
/* If this is A < 0 or A >= 0, we can do this by taking the ones
complement of A (for GE) and shifting the sign bit to the low bit. */
&& (normalizep || STORE_FLAG_VALUE == 1
|| (GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_WIDE_INT
&& ((STORE_FLAG_VALUE & GET_MODE_MASK (mode))
- == (unsigned HOST_WIDE_INT) 1 << (GET_MODE_BITSIZE (mode) - 1)))))
+ == ((unsigned HOST_WIDE_INT) 1
+ << (GET_MODE_BITSIZE (mode) - 1))))))
{
subtarget = target;
+ if (!target)
+ target_mode = mode;
+
/* If the result is to be wider than OP0, it is best to convert it
first. If it is to be narrower, it is *incorrect* to convert it
first. */
- if (GET_MODE_SIZE (target_mode) > GET_MODE_SIZE (mode))
+ else if (GET_MODE_SIZE (target_mode) > GET_MODE_SIZE (mode))
{
op0 = convert_modes (target_mode, mode, op0, 0);
mode = target_mode;
return op0;
}
- if (icode != CODE_FOR_nothing)
+ mclass = GET_MODE_CLASS (mode);
+ for (compare_mode = mode; compare_mode != VOIDmode;
+ compare_mode = GET_MODE_WIDER_MODE (compare_mode))
{
- insn_operand_predicate_fn pred;
-
- /* We think we may be able to do this with a scc insn. Emit the
- comparison and then the scc insn. */
-
- do_pending_stack_adjust ();
- last = get_last_insn ();
-
- comparison
- = compare_from_rtx (op0, op1, code, unsignedp, mode, NULL_RTX);
- if (CONSTANT_P (comparison))
+ enum machine_mode optab_mode = mclass == MODE_CC ? CCmode : compare_mode;
+ icode = optab_handler (cstore_optab, optab_mode)->insn_code;
+ if (icode != CODE_FOR_nothing)
{
- switch (GET_CODE (comparison))
+ do_pending_stack_adjust ();
+ tem = emit_cstore (target, icode, code, mode, compare_mode,
+ unsignedp, op0, op1, normalizep, target_mode);
+ if (tem)
+ return tem;
+
+ if (GET_MODE_CLASS (mode) == MODE_FLOAT)
{
- case CONST_INT:
- if (comparison == const0_rtx)
- return const0_rtx;
- break;
-
-#ifdef FLOAT_STORE_FLAG_VALUE
- case CONST_DOUBLE:
- if (comparison == CONST0_RTX (GET_MODE (comparison)))
- return const0_rtx;
- break;
-#endif
- default:
- gcc_unreachable ();
+ tem = emit_cstore (target, icode, scode, mode, compare_mode,
+ unsignedp, op1, op0, normalizep, target_mode);
+ if (tem)
+ return tem;
}
-
- if (normalizep == 1)
- return const1_rtx;
- if (normalizep == -1)
- return constm1_rtx;
- return const_true_rtx;
+ break;
}
+ }
- /* The code of COMPARISON may not match CODE if compare_from_rtx
- decided to swap its operands and reverse the original code.
+ return 0;
+}
- We know that compare_from_rtx returns either a CONST_INT or
- a new comparison code, so it is safe to just extract the
- code from COMPARISON. */
- code = GET_CODE (comparison);
+/* Emit a store-flags instruction for comparison CODE on OP0 and OP1
+ and storing in TARGET. Normally return TARGET.
+ Return 0 if that cannot be done.
- /* Get a reference to the target in the proper mode for this insn. */
- compare_mode = insn_data[(int) icode].operand[0].mode;
- subtarget = target;
- pred = insn_data[(int) icode].operand[0].predicate;
- if (optimize || ! (*pred) (subtarget, compare_mode))
- subtarget = gen_reg_rtx (compare_mode);
+ MODE is the mode to use for OP0 and OP1 should they be CONST_INTs. If
+ it is VOIDmode, they cannot both be CONST_INT.
- pattern = GEN_FCN (icode) (subtarget);
- if (pattern)
- {
- emit_insn (pattern);
+ UNSIGNEDP is for the case where we have to widen the operands
+ to perform the operation. It says to use zero-extension.
- /* If we are converting to a wider mode, first convert to
- TARGET_MODE, then normalize. This produces better combining
- opportunities on machines that have a SIGN_EXTRACT when we are
- testing a single bit. This mostly benefits the 68k.
+ NORMALIZEP is 1 if we should convert the result to be either zero
+ or one. Normalize is -1 if we should convert the result to be
+ either zero or -1. If NORMALIZEP is zero, the result will be left
+ "raw" out of the scc insn. */
- If STORE_FLAG_VALUE does not have the sign bit set when
- interpreted in COMPARE_MODE, we can do this conversion as
- unsigned, which is usually more efficient. */
- if (GET_MODE_SIZE (target_mode) > GET_MODE_SIZE (compare_mode))
- {
- convert_move (target, subtarget,
- (GET_MODE_BITSIZE (compare_mode)
- <= HOST_BITS_PER_WIDE_INT)
- && 0 == (STORE_FLAG_VALUE
- & ((HOST_WIDE_INT) 1
- << (GET_MODE_BITSIZE (compare_mode) -1))));
- op0 = target;
- compare_mode = target_mode;
- }
- else
- op0 = subtarget;
+rtx
+emit_store_flag (rtx target, enum rtx_code code, rtx op0, rtx op1,
+ enum machine_mode mode, int unsignedp, int normalizep)
+{
+ enum machine_mode target_mode = target ? GET_MODE (target) : VOIDmode;
+ enum rtx_code rcode;
+ rtx subtarget;
+ rtx tem, last, trueval;
- /* If we want to keep subexpressions around, don't reuse our
- last target. */
+ tem = emit_store_flag_1 (target, code, op0, op1, mode, unsignedp, normalizep,
+ target_mode);
+ if (tem)
+ return tem;
- if (optimize)
- subtarget = 0;
+ /* If we reached here, we can't do this with a scc insn, however there
+ are some comparisons that can be done in other ways. Don't do any
+ of these cases if branches are very cheap. */
+ if (BRANCH_COST (optimize_insn_for_speed_p (), false) == 0)
+ return 0;
- /* Now normalize to the proper value in COMPARE_MODE. Sometimes
- we don't have to do anything. */
- if (normalizep == 0 || normalizep == STORE_FLAG_VALUE)
- ;
- /* STORE_FLAG_VALUE might be the most negative number, so write
- the comparison this way to avoid a compiler-time warning. */
- else if (- normalizep == STORE_FLAG_VALUE)
- op0 = expand_unop (compare_mode, neg_optab, op0, subtarget, 0);
-
- /* We don't want to use STORE_FLAG_VALUE < 0 below since this
- makes it hard to use a value of just the sign bit due to
- ANSI integer constant typing rules. */
- else if (GET_MODE_BITSIZE (compare_mode) <= HOST_BITS_PER_WIDE_INT
- && (STORE_FLAG_VALUE
- & ((HOST_WIDE_INT) 1
- << (GET_MODE_BITSIZE (compare_mode) - 1))))
- op0 = expand_shift (RSHIFT_EXPR, compare_mode, op0,
- size_int (GET_MODE_BITSIZE (compare_mode) - 1),
- subtarget, normalizep == 1);
- else
- {
- gcc_assert (STORE_FLAG_VALUE & 1);
-
- op0 = expand_and (compare_mode, op0, const1_rtx, subtarget);
- if (normalizep == -1)
- op0 = expand_unop (compare_mode, neg_optab, op0, op0, 0);
- }
+ /* See what we need to return. We can only return a 1, -1, or the
+ sign bit. */
- /* If we were converting to a smaller mode, do the
- conversion now. */
- if (target_mode != compare_mode)
- {
- convert_move (target, op0, 0);
- return target;
- }
- else
- return op0;
- }
+ if (normalizep == 0)
+ {
+ if (STORE_FLAG_VALUE == 1 || STORE_FLAG_VALUE == -1)
+ normalizep = STORE_FLAG_VALUE;
+
+ else if (GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_WIDE_INT
+ && ((STORE_FLAG_VALUE & GET_MODE_MASK (mode))
+ == (unsigned HOST_WIDE_INT) 1 << (GET_MODE_BITSIZE (mode) - 1)))
+ ;
+ else
+ return 0;
}
- delete_insns_since (last);
+ last = get_last_insn ();
/* If optimizing, use different pseudo registers for each insn, instead
of reusing the same pseudo. This leads to better CSE, but slows
down the compiler, since there are more pseudos */
subtarget = (!optimize
&& (target_mode == mode)) ? target : NULL_RTX;
+ trueval = GEN_INT (normalizep ? normalizep : STORE_FLAG_VALUE);
+
+ /* For floating-point comparisons, try the reverse comparison or try
+ changing the "orderedness" of the comparison. */
+ if (GET_MODE_CLASS (mode) == MODE_FLOAT)
+ {
+ enum rtx_code first_code;
+ bool and_them;
+
+ rcode = reverse_condition_maybe_unordered (code);
+ if (can_compare_p (rcode, mode, ccp_store_flag)
+ && (code == ORDERED || code == UNORDERED
+ || (! HONOR_NANS (mode) && (code == LTGT || code == UNEQ))
+ || (! HONOR_SNANS (mode) && (code == EQ || code == NE))))
+ {
+ int want_add = ((STORE_FLAG_VALUE == 1 && normalizep == -1)
+ || (STORE_FLAG_VALUE == -1 && normalizep == 1));
+
+ /* For the reverse comparison, use either an addition or a XOR. */
+ if (want_add
+ && rtx_cost (GEN_INT (normalizep), PLUS,
+ optimize_insn_for_speed_p ()) == 0)
+ {
+ tem = emit_store_flag_1 (subtarget, rcode, op0, op1, mode, 0,
+ STORE_FLAG_VALUE, target_mode);
+ if (tem)
+ return expand_binop (target_mode, add_optab, tem,
+ GEN_INT (normalizep),
+ target, 0, OPTAB_WIDEN);
+ }
+ else if (!want_add
+ && rtx_cost (trueval, XOR,
+ optimize_insn_for_speed_p ()) == 0)
+ {
+ tem = emit_store_flag_1 (subtarget, rcode, op0, op1, mode, 0,
+ normalizep, target_mode);
+ if (tem)
+ return expand_binop (target_mode, xor_optab, tem, trueval,
+ target, INTVAL (trueval) >= 0, OPTAB_WIDEN);
+ }
+ }
+
+ delete_insns_since (last);
+
+ /* Cannot split ORDERED and UNORDERED, only try the above trick. */
+ if (code == ORDERED || code == UNORDERED)
+ return 0;
+
+ and_them = split_comparison (code, mode, &first_code, &code);
+
+ /* If there are no NaNs, the first comparison should always fall through.
+ Effectively change the comparison to the other one. */
+ if (!HONOR_NANS (mode))
+ {
+ gcc_assert (first_code == (and_them ? ORDERED : UNORDERED));
+ return emit_store_flag_1 (target, code, op0, op1, mode, 0, normalizep,
+ target_mode);
+ }
+
+#ifdef HAVE_conditional_move
+ /* Try using a setcc instruction for ORDERED/UNORDERED, followed by a
+ conditional move. */
+ tem = emit_store_flag_1 (subtarget, first_code, op0, op1, mode, 0,
+ normalizep, target_mode);
+ if (tem == 0)
+ return 0;
- /* If we reached here, we can't do this with a scc insn. However, there
- are some comparisons that can be done directly. For example, if
- this is an equality comparison of integers, we can try to exclusive-or
+ if (and_them)
+ tem = emit_conditional_move (target, code, op0, op1, mode,
+ tem, const0_rtx, GET_MODE (tem), 0);
+ else
+ tem = emit_conditional_move (target, code, op0, op1, mode,
+ trueval, tem, GET_MODE (tem), 0);
+
+ if (tem == 0)
+ delete_insns_since (last);
+ return tem;
+#else
+ return 0;
+#endif
+ }
+
+ /* The remaining tricks only apply to integer comparisons. */
+
+ if (GET_MODE_CLASS (mode) != MODE_INT)
+ return 0;
+
+ /* If this is an equality comparison of integers, we can try to exclusive-or
(or subtract) the two operands and use a recursive call to try the
comparison with zero. Don't do any of these cases if branches are
very cheap. */
- if (BRANCH_COST > 0
- && GET_MODE_CLASS (mode) == MODE_INT && (code == EQ || code == NE)
- && op1 != const0_rtx)
+ if ((code == EQ || code == NE) && op1 != const0_rtx)
{
tem = expand_binop (mode, xor_optab, op0, op1, subtarget, 1,
OPTAB_WIDEN);
if (tem != 0)
tem = emit_store_flag (target, code, tem, const0_rtx,
mode, unsignedp, normalizep);
- if (tem == 0)
- delete_insns_since (last);
- return tem;
+ if (tem != 0)
+ return tem;
+
+ delete_insns_since (last);
+ }
+
+ /* For integer comparisons, try the reverse comparison. However, for
+ small X and if we'd have anyway to extend, implementing "X != 0"
+ as "-(int)X >> 31" is still cheaper than inverting "(int)X == 0". */
+ rcode = reverse_condition (code);
+ if (can_compare_p (rcode, mode, ccp_store_flag)
+ && ! (optab_handler (cstore_optab, mode)->insn_code == CODE_FOR_nothing
+ && code == NE
+ && GET_MODE_SIZE (mode) < UNITS_PER_WORD
+ && op1 == const0_rtx))
+ {
+ int want_add = ((STORE_FLAG_VALUE == 1 && normalizep == -1)
+ || (STORE_FLAG_VALUE == -1 && normalizep == 1));
+
+ /* Again, for the reverse comparison, use either an addition or a XOR. */
+ if (want_add
+ && rtx_cost (GEN_INT (normalizep), PLUS,
+ optimize_insn_for_speed_p ()) == 0)
+ {
+ tem = emit_store_flag_1 (subtarget, rcode, op0, op1, mode, 0,
+ STORE_FLAG_VALUE, target_mode);
+ if (tem != 0)
+ tem = expand_binop (target_mode, add_optab, tem,
+ GEN_INT (normalizep), target, 0, OPTAB_WIDEN);
+ }
+ else if (!want_add
+ && rtx_cost (trueval, XOR,
+ optimize_insn_for_speed_p ()) == 0)
+ {
+ tem = emit_store_flag_1 (subtarget, rcode, op0, op1, mode, 0,
+ normalizep, target_mode);
+ if (tem != 0)
+ tem = expand_binop (target_mode, xor_optab, tem, trueval, target,
+ INTVAL (trueval) >= 0, OPTAB_WIDEN);
+ }
+
+ if (tem != 0)
+ return tem;
+ delete_insns_since (last);
}
/* Some other cases we can do are EQ, NE, LE, and GT comparisons with
do LE and GT if branches are expensive since they are expensive on
2-operand machines. */
- if (BRANCH_COST == 0
- || GET_MODE_CLASS (mode) != MODE_INT || op1 != const0_rtx
+ if (op1 != const0_rtx
|| (code != EQ && code != NE
- && (BRANCH_COST <= 1 || (code != LE && code != GT))))
+ && (BRANCH_COST (optimize_insn_for_speed_p (),
+ false) <= 1 || (code != LE && code != GT))))
return 0;
- /* See what we need to return. We can only return a 1, -1, or the
- sign bit. */
-
- if (normalizep == 0)
- {
- if (STORE_FLAG_VALUE == 1 || STORE_FLAG_VALUE == -1)
- normalizep = STORE_FLAG_VALUE;
-
- else if (GET_MODE_BITSIZE (mode) <= HOST_BITS_PER_WIDE_INT
- && ((STORE_FLAG_VALUE & GET_MODE_MASK (mode))
- == (unsigned HOST_WIDE_INT) 1 << (GET_MODE_BITSIZE (mode) - 1)))
- ;
- else
- return 0;
- }
-
/* Try to put the result of the comparison in the sign bit. Assume we can't
do the necessary operation below. */
that is compensated by the subsequent overflow when subtracting
one / negating. */
- if (abs_optab->handlers[mode].insn_code != CODE_FOR_nothing)
+ if (optab_handler (abs_optab, mode)->insn_code != CODE_FOR_nothing)
tem = expand_unop (mode, abs_optab, op0, subtarget, 1);
- else if (ffs_optab->handlers[mode].insn_code != CODE_FOR_nothing)
+ else if (optab_handler (ffs_optab, mode)->insn_code != CODE_FOR_nothing)
tem = expand_unop (mode, ffs_optab, op0, subtarget, 1);
else if (GET_MODE_SIZE (mode) < UNITS_PER_WORD)
{
that "or", which is an extra insn, so we only handle EQ if branches
are expensive. */
- if (tem == 0 && (code == NE || BRANCH_COST > 1))
+ if (tem == 0
+ && (code == NE
+ || BRANCH_COST (optimize_insn_for_speed_p (),
+ false) > 1))
{
if (rtx_equal_p (subtarget, op0))
subtarget = 0;
if (tem)
{
- if (GET_MODE (tem) != target_mode)
+ if (!target)
+ ;
+ else if (GET_MODE (tem) != target_mode)
{
convert_move (target, tem, 0);
tem = target;
enum machine_mode mode, int unsignedp, int normalizep)
{
rtx tem, label;
+ rtx trueval, falseval;
/* First see if emit_store_flag can do the job. */
tem = emit_store_flag (target, code, op0, op1, mode, unsignedp, normalizep);
if (tem != 0)
return tem;
- if (normalizep == 0)
- normalizep = 1;
+ if (!target)
+ target = gen_reg_rtx (word_mode);
- /* If this failed, we have to do this with set/compare/jump/set code. */
+ /* If this failed, we have to do this with set/compare/jump/set code.
+ For foo != 0, if foo is in OP0, just replace it with 1 if nonzero. */
+ trueval = normalizep ? GEN_INT (normalizep) : const1_rtx;
+ if (code == NE
+ && GET_MODE_CLASS (mode) == MODE_INT
+ && REG_P (target)
+ && op0 == target
+ && op1 == const0_rtx)
+ {
+ label = gen_label_rtx ();
+ do_compare_rtx_and_jump (target, const0_rtx, EQ, unsignedp,
+ mode, NULL_RTX, NULL_RTX, label, -1);
+ emit_move_insn (target, trueval);
+ emit_label (label);
+ return target;
+ }
if (!REG_P (target)
|| reg_mentioned_p (target, op0) || reg_mentioned_p (target, op1))
target = gen_reg_rtx (GET_MODE (target));
- emit_move_insn (target, const1_rtx);
+ /* Jump in the right direction if the target cannot implement CODE
+ but can jump on its reverse condition. */
+ falseval = const0_rtx;
+ if (! can_compare_p (code, mode, ccp_jump)
+ && (! FLOAT_MODE_P (mode)
+ || code == ORDERED || code == UNORDERED
+ || (! HONOR_NANS (mode) && (code == LTGT || code == UNEQ))
+ || (! HONOR_SNANS (mode) && (code == EQ || code == NE))))
+ {
+ enum rtx_code rcode;
+ if (FLOAT_MODE_P (mode))
+ rcode = reverse_condition_maybe_unordered (code);
+ else
+ rcode = reverse_condition (code);
+
+ /* Canonicalize to UNORDERED for the libcall. */
+ if (can_compare_p (rcode, mode, ccp_jump)
+ || (code == ORDERED && ! can_compare_p (ORDERED, mode, ccp_jump)))
+ {
+ falseval = trueval;
+ trueval = const0_rtx;
+ code = rcode;
+ }
+ }
+
+ emit_move_insn (target, trueval);
label = gen_label_rtx ();
do_compare_rtx_and_jump (op0, op1, code, unsignedp, mode, NULL_RTX,
- NULL_RTX, label);
+ NULL_RTX, label, -1);
- emit_move_insn (target, const0_rtx);
+ emit_move_insn (target, falseval);
emit_label (label);
return target;
}
\f
/* Perform possibly multi-word comparison and conditional jump to LABEL
- if ARG1 OP ARG2 true where ARG1 and ARG2 are of mode MODE
-
- The algorithm is based on the code in expr.c:do_jump.
-
- Note that this does not perform a general comparison. Only variants
- generated within expmed.c are correctly handled, others abort (but could
- be handled if needed). */
+ if ARG1 OP ARG2 true where ARG1 and ARG2 are of mode MODE. This is
+ now a thin wrapper around do_compare_rtx_and_jump. */
static void
do_cmp_and_jump (rtx arg1, rtx arg2, enum rtx_code op, enum machine_mode mode,
rtx label)
{
- /* If this mode is an integer too wide to compare properly,
- compare word by word. Rely on cse to optimize constant cases. */
-
- if (GET_MODE_CLASS (mode) == MODE_INT
- && ! can_compare_p (op, mode, ccp_jump))
- {
- rtx label2 = gen_label_rtx ();
-
- switch (op)
- {
- case LTU:
- do_jump_by_parts_greater_rtx (mode, 1, arg2, arg1, label2, label);
- break;
-
- case LEU:
- do_jump_by_parts_greater_rtx (mode, 1, arg1, arg2, label, label2);
- break;
-
- case LT:
- do_jump_by_parts_greater_rtx (mode, 0, arg2, arg1, label2, label);
- break;
-
- case GT:
- do_jump_by_parts_greater_rtx (mode, 0, arg1, arg2, label2, label);
- break;
-
- case GE:
- do_jump_by_parts_greater_rtx (mode, 0, arg2, arg1, label, label2);
- break;
-
- /* do_jump_by_parts_equality_rtx compares with zero. Luckily
- that's the only equality operations we do */
- case EQ:
- gcc_assert (arg2 == const0_rtx && mode == GET_MODE(arg1));
- do_jump_by_parts_equality_rtx (arg1, label2, label);
- break;
-
- case NE:
- gcc_assert (arg2 == const0_rtx && mode == GET_MODE(arg1));
- do_jump_by_parts_equality_rtx (arg1, label, label2);
- break;
-
- default:
- gcc_unreachable ();
- }
-
- emit_label (label2);
- }
- else
- emit_cmp_and_jump_insns (arg1, arg2, op, NULL_RTX, mode, 0, label);
+ int unsignedp = (op == LTU || op == LEU || op == GTU || op == GEU);
+ do_compare_rtx_and_jump (arg1, arg2, op, unsignedp, mode,
+ NULL_RTX, NULL_RTX, label, -1);
}
OSDN Git Service
