/* Subroutines for manipulating rtx's in semantically interesting ways.
Copyright (C) 1987, 1991, 1994, 1995, 1996, 1997, 1998,
- 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
+ 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
+ Free Software Foundation, Inc.
This file is part of GCC.
You should have received a copy of the GNU General Public License
along with GCC; see the file COPYING. If not, write to the Free
-Software Foundation, 59 Temple Place - Suite 330, Boston, MA
-02111-1307, USA. */
+Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
+02110-1301, USA. */
#include "config.h"
#include "ggc.h"
#include "recog.h"
#include "langhooks.h"
+#include "target.h"
+#include "output.h"
static rtx break_out_memory_refs (rtx);
static void emit_stack_probe (rtx);
int width = GET_MODE_BITSIZE (mode);
/* You want to truncate to a _what_? */
- if (! SCALAR_INT_MODE_P (mode))
- abort ();
+ gcc_assert (SCALAR_INT_MODE_P (mode));
/* Canonicalize BImode to 0 and STORE_FLAG_VALUE. */
if (mode == BImode)
return c;
}
-/* Return an rtx for the sum of X and the integer C.
-
- This function should be used via the `plus_constant' macro. */
+/* Return an rtx for the sum of X and the integer C. */
rtx
-plus_constant_wide (rtx x, HOST_WIDE_INT c)
+plus_constant (rtx x, HOST_WIDE_INT c)
{
RTX_CODE code;
rtx y;
rtx
expr_size (tree exp)
{
- tree size = SUBSTITUTE_PLACEHOLDER_IN_EXPR (lang_hooks.expr_size (exp), exp);
+ tree size;
+
+ if (TREE_CODE (exp) == WITH_SIZE_EXPR)
+ size = TREE_OPERAND (exp, 1);
+ else
+ size = SUBSTITUTE_PLACEHOLDER_IN_EXPR (lang_hooks.expr_size (exp), exp);
return expand_expr (size, NULL_RTX, TYPE_MODE (sizetype), 0);
}
HOST_WIDE_INT
int_expr_size (tree exp)
{
- tree t = lang_hooks.expr_size (exp);
-
- if (t == 0
- || TREE_CODE (t) != INTEGER_CST
- || TREE_OVERFLOW (t)
- || TREE_INT_CST_HIGH (t) != 0
- /* If the result would appear negative, it's too big to represent. */
- || (HOST_WIDE_INT) TREE_INT_CST_LOW (t) < 0)
+ tree size;
+
+ if (TREE_CODE (exp) == WITH_SIZE_EXPR)
+ size = TREE_OPERAND (exp, 1);
+ else
+ size = lang_hooks.expr_size (exp);
+
+ if (size == 0 || !host_integerp (size, 0))
return -1;
- return TREE_INT_CST_LOW (t);
+ return tree_low_cst (size, 0);
}
\f
/* Return a copy of X in which all memory references
static rtx
break_out_memory_refs (rtx x)
{
- if (GET_CODE (x) == MEM
+ if (MEM_P (x)
|| (CONSTANT_P (x) && CONSTANT_ADDRESS_P (x)
&& GET_MODE (x) != VOIDmode))
x = force_reg (GET_MODE (x), x);
rtx x)
{
#ifndef POINTERS_EXTEND_UNSIGNED
+ gcc_assert (GET_MODE (x) == to_mode || GET_MODE (x) == VOIDmode);
return x;
#else /* defined(POINTERS_EXTEND_UNSIGNED) */
enum machine_mode from_mode;
x, POINTERS_EXTEND_UNSIGNED);
#endif /* defined(POINTERS_EXTEND_UNSIGNED) */
}
-
-/* Given a memory address or facsimile X, construct a new address,
- currently equivalent, that is stable: future stores won't change it.
-
- X must be composed of constants, register and memory references
- combined with addition, subtraction and multiplication:
- in other words, just what you can get from expand_expr if sum_ok is 1.
-
- Works by making copies of all regs and memory locations used
- by X and combining them the same way X does.
- You could also stabilize the reference to this address
- by copying the address to a register with copy_to_reg;
- but then you wouldn't get indexed addressing in the reference. */
-
-rtx
-copy_all_regs (rtx x)
-{
- if (GET_CODE (x) == REG)
- {
- if (REGNO (x) != FRAME_POINTER_REGNUM
-#if HARD_FRAME_POINTER_REGNUM != FRAME_POINTER_REGNUM
- && REGNO (x) != HARD_FRAME_POINTER_REGNUM
-#endif
- )
- x = copy_to_reg (x);
- }
- else if (GET_CODE (x) == MEM)
- x = copy_to_reg (x);
- else if (GET_CODE (x) == PLUS || GET_CODE (x) == MINUS
- || GET_CODE (x) == MULT)
- {
- rtx op0 = copy_all_regs (XEXP (x, 0));
- rtx op1 = copy_all_regs (XEXP (x, 1));
- if (op0 != XEXP (x, 0) || op1 != XEXP (x, 1))
- x = gen_rtx_fmt_ee (GET_CODE (x), Pmode, op0, op1);
- }
- return x;
-}
\f
/* Return something equivalent to X but valid as a memory address
for something of mode MODE. When X is not itself valid, this
{
rtx oldx = x;
- if (GET_CODE (x) == ADDRESSOF)
- return x;
-
x = convert_memory_address (Pmode, x);
/* By passing constant addresses through registers
if (! cse_not_expected && CONSTANT_P (x) && CONSTANT_ADDRESS_P (x))
x = force_reg (Pmode, x);
- /* Accept a QUEUED that refers to a REG
- even though that isn't a valid address.
- On attempting to put this in an insn we will call protect_from_queue
- which will turn it into a REG, which is valid. */
- else if (GET_CODE (x) == QUEUED
- && GET_CODE (QUEUED_VAR (x)) == REG)
- ;
-
/* We get better cse by rejecting indirect addressing at this stage.
Let the combiner create indirect addresses where appropriate.
For now, generate the code so that the subexpressions useful to share
are visible. But not if cse won't be done! */
else
{
- if (! cse_not_expected && GET_CODE (x) != REG)
+ if (! cse_not_expected && !REG_P (x))
x = break_out_memory_refs (x);
/* At this point, any valid address is accepted. */
- GO_IF_LEGITIMATE_ADDRESS (mode, x, win);
+ if (memory_address_p (mode, x))
+ goto win;
/* If it was valid before but breaking out memory refs invalidated it,
use it the old way. */
/* If we have a register that's an invalid address,
it must be a hard reg of the wrong class. Copy it to a pseudo. */
- else if (GET_CODE (x) == REG)
+ else if (REG_P (x))
x = copy_to_reg (x);
/* Last resort: copy the value to a register, since
win2:
x = oldx;
win:
- if (flag_force_addr && ! cse_not_expected && GET_CODE (x) != REG
- /* Don't copy an addr via a reg if it is one of our stack slots. */
- && ! (GET_CODE (x) == PLUS
- && (XEXP (x, 0) == virtual_stack_vars_rtx
- || XEXP (x, 0) == virtual_incoming_args_rtx)))
+ if (flag_force_addr && ! cse_not_expected && !REG_P (x))
{
- if (general_operand (x, Pmode))
- x = force_reg (Pmode, x);
- else
- x = force_operand (x, NULL_RTX);
+ x = force_operand (x, NULL_RTX);
+ x = force_reg (Pmode, x);
}
}
a reg as a pointer if we have REG or REG + CONST_INT. */
if (oldx == x)
return x;
- else if (GET_CODE (x) == REG)
+ else if (REG_P (x))
mark_reg_pointer (x, BITS_PER_UNIT);
else if (GET_CODE (x) == PLUS
- && GET_CODE (XEXP (x, 0)) == REG
+ && REG_P (XEXP (x, 0))
&& GET_CODE (XEXP (x, 1)) == CONST_INT)
mark_reg_pointer (XEXP (x, 0), BITS_PER_UNIT);
rtx
validize_mem (rtx ref)
{
- if (GET_CODE (ref) != MEM)
+ if (!MEM_P (ref))
return ref;
+ ref = use_anchored_address (ref);
if (! (flag_force_addr && CONSTANT_ADDRESS_P (XEXP (ref, 0)))
&& memory_address_p (GET_MODE (ref), XEXP (ref, 0)))
return ref;
/* Don't alter REF itself, since that is probably a stack slot. */
return replace_equiv_address (ref, XEXP (ref, 0));
}
-\f
-/* Given REF, either a MEM or a REG, and T, either the type of X or
- the expression corresponding to REF, set RTX_UNCHANGING_P if
- appropriate. */
-void
-maybe_set_unchanging (rtx ref, tree t)
-{
- /* We can set RTX_UNCHANGING_P from TREE_READONLY for decls whose
- initialization is only executed once, or whose initializer always
- has the same value. Currently we simplify this to PARM_DECLs in the
- first case, and decls with TREE_CONSTANT initializers in the second.
-
- We cannot do this for non-static aggregates, because of the double
- writes that can be generated by store_constructor, depending on the
- contents of the initializer. Yes, this does eliminate a good fraction
- of the number of uses of RTX_UNCHANGING_P for a language like Ada.
- It also eliminates a good quantity of bugs. Let this be incentive to
- eliminate RTX_UNCHANGING_P entirely in favor of a more reliable
- solution, perhaps based on alias sets. */
-
- if ((TREE_READONLY (t) && DECL_P (t)
- && (TREE_STATIC (t) || ! AGGREGATE_TYPE_P (TREE_TYPE (t)))
- && (TREE_CODE (t) == PARM_DECL
- || (DECL_INITIAL (t) && TREE_CONSTANT (DECL_INITIAL (t)))))
- || TREE_CODE_CLASS (TREE_CODE (t)) == 'c')
- RTX_UNCHANGING_P (ref) = 1;
-}
-\f
-/* Return a modified copy of X with its memory address copied
- into a temporary register to protect it from side effects.
- If X is not a MEM, it is returned unchanged (and not copied).
- Perhaps even if it is a MEM, if there is no need to change it. */
+/* If X is a memory reference to a member of an object block, try rewriting
+ it to use an anchor instead. Return the new memory reference on success
+ and the old one on failure. */
rtx
-stabilize (rtx x)
+use_anchored_address (rtx x)
{
- if (GET_CODE (x) != MEM
- || ! rtx_unstable_p (XEXP (x, 0)))
+ rtx base;
+ HOST_WIDE_INT offset;
+
+ if (!flag_section_anchors)
+ return x;
+
+ if (!MEM_P (x))
+ return x;
+
+ /* Split the address into a base and offset. */
+ base = XEXP (x, 0);
+ offset = 0;
+ if (GET_CODE (base) == CONST
+ && GET_CODE (XEXP (base, 0)) == PLUS
+ && GET_CODE (XEXP (XEXP (base, 0), 1)) == CONST_INT)
+ {
+ offset += INTVAL (XEXP (XEXP (base, 0), 1));
+ base = XEXP (XEXP (base, 0), 0);
+ }
+
+ /* Check whether BASE is suitable for anchors. */
+ if (GET_CODE (base) != SYMBOL_REF
+ || !SYMBOL_REF_HAS_BLOCK_INFO_P (base)
+ || SYMBOL_REF_ANCHOR_P (base)
+ || SYMBOL_REF_BLOCK (base) == NULL
+ || !targetm.use_anchors_for_symbol_p (base))
return x;
- return
- replace_equiv_address (x, force_reg (Pmode, copy_all_regs (XEXP (x, 0))));
+ /* Decide where BASE is going to be. */
+ place_block_symbol (base);
+
+ /* Get the anchor we need to use. */
+ offset += SYMBOL_REF_BLOCK_OFFSET (base);
+ base = get_section_anchor (SYMBOL_REF_BLOCK (base), offset,
+ SYMBOL_REF_TLS_MODEL (base));
+
+ /* Work out the offset from the anchor. */
+ offset -= SYMBOL_REF_BLOCK_OFFSET (base);
+
+ /* If we're going to run a CSE pass, force the anchor into a register.
+ We will then be able to reuse registers for several accesses, if the
+ target costs say that that's worthwhile. */
+ if (!cse_not_expected)
+ base = force_reg (GET_MODE (base), base);
+
+ return replace_equiv_address (x, plus_constant (base, offset));
}
\f
/* Copy the value or contents of X to a new temp reg and return that reg. */
if (! general_operand (x, VOIDmode))
x = force_operand (x, temp);
- if (GET_MODE (x) != mode && GET_MODE (x) != VOIDmode)
- abort ();
+ gcc_assert (GET_MODE (x) == mode || GET_MODE (x) == VOIDmode);
if (x != temp)
emit_move_insn (temp, x);
return temp;
{
rtx temp, insn, set;
- if (GET_CODE (x) == REG)
+ if (REG_P (x))
return x;
if (general_operand (x, mode))
else
{
temp = force_operand (x, NULL_RTX);
- if (GET_CODE (temp) == REG)
+ if (REG_P (temp))
insn = get_last_insn ();
else
{
{
rtx temp;
- if (GET_CODE (x) != MEM || GET_MODE (x) == BLKmode)
+ if (!MEM_P (x) || GET_MODE (x) == BLKmode)
return x;
temp = gen_reg_rtx (GET_MODE (x));
{
rtx temp;
- if (target && GET_CODE (target) == REG)
+ if (target && REG_P (target))
temp = target;
else
temp = gen_reg_rtx (mode);
FOR_CALL is nonzero if this call is promoting args for a call. */
#if defined(PROMOTE_MODE) && !defined(PROMOTE_FUNCTION_MODE)
-#define PROMOTE_FUNCTON_MODE PROMOTE_MODE
+#define PROMOTE_FUNCTION_MODE PROMOTE_MODE
#endif
enum machine_mode
{
#ifdef PROMOTE_FUNCTION_MODE
case INTEGER_TYPE: case ENUMERAL_TYPE: case BOOLEAN_TYPE:
- case CHAR_TYPE: case REAL_TYPE: case OFFSET_TYPE:
+ case REAL_TYPE: case OFFSET_TYPE:
#ifdef PROMOTE_MODE
if (for_call)
{
adjust_stack (rtx adjust)
{
rtx temp;
- adjust = protect_from_queue (adjust, 0);
if (adjust == const0_rtx)
return;
anti_adjust_stack (rtx adjust)
{
rtx temp;
- adjust = protect_from_queue (adjust, 0);
if (adjust == const0_rtx)
return;
/* Round the size of a block to be pushed up to the boundary required
by this machine. SIZE is the desired size, which need not be constant. */
-rtx
+static rtx
round_push (rtx size)
{
int align = PREFERRED_STACK_BOUNDARY / BITS_PER_UNIT;
*psave = sa = gen_reg_rtx (mode);
}
}
- else
- {
- if (mode == VOIDmode || GET_MODE (sa) != mode)
- abort ();
- }
if (after)
{
rtx seq;
start_sequence ();
+ do_pending_stack_adjust ();
/* We must validize inside the sequence, to ensure that any instructions
created by the validize call also get moved to the right place. */
if (sa != 0)
}
else
{
+ do_pending_stack_adjust ();
if (sa != 0)
sa = validize_mem (sa);
emit_insn (fcn (sa, stack_pointer_rtx));
gen_rtx_MEM (BLKmode, stack_pointer_rtx)));
}
+ discard_pending_stack_adjust ();
+
if (after)
{
rtx seq;
else
emit_insn (fcn (stack_pointer_rtx, sa));
}
-\f
-#ifdef SETJMP_VIA_SAVE_AREA
-/* Optimize RTL generated by allocate_dynamic_stack_space for targets
- where SETJMP_VIA_SAVE_AREA is true. The problem is that on these
- platforms, the dynamic stack space used can corrupt the original
- frame, thus causing a crash if a longjmp unwinds to it. */
+
+/* Invoke emit_stack_save on the nonlocal_goto_save_area for the current
+ function. This function should be called whenever we allocate or
+ deallocate dynamic stack space. */
void
-optimize_save_area_alloca (rtx insns)
+update_nonlocal_goto_save_area (void)
{
- rtx insn;
-
- for (insn = insns; insn; insn = NEXT_INSN(insn))
- {
- rtx note;
-
- if (GET_CODE (insn) != INSN)
- continue;
-
- for (note = REG_NOTES (insn); note; note = XEXP (note, 1))
- {
- if (REG_NOTE_KIND (note) != REG_SAVE_AREA)
- continue;
-
- if (!current_function_calls_setjmp)
- {
- rtx pat = PATTERN (insn);
-
- /* If we do not see the note in a pattern matching
- these precise characteristics, we did something
- entirely wrong in allocate_dynamic_stack_space.
-
- Note, one way this could happen is if SETJMP_VIA_SAVE_AREA
- was defined on a machine where stacks grow towards higher
- addresses.
-
- Right now only supported port with stack that grow upward
- is the HPPA and it does not define SETJMP_VIA_SAVE_AREA. */
- if (GET_CODE (pat) != SET
- || SET_DEST (pat) != stack_pointer_rtx
- || GET_CODE (SET_SRC (pat)) != MINUS
- || XEXP (SET_SRC (pat), 0) != stack_pointer_rtx)
- abort ();
-
- /* This will now be transformed into a (set REG REG)
- so we can just blow away all the other notes. */
- XEXP (SET_SRC (pat), 1) = XEXP (note, 0);
- REG_NOTES (insn) = NULL_RTX;
- }
- else
- {
- /* setjmp was called, we must remove the REG_SAVE_AREA
- note so that later passes do not get confused by its
- presence. */
- if (note == REG_NOTES (insn))
- {
- REG_NOTES (insn) = XEXP (note, 1);
- }
- else
- {
- rtx srch;
-
- for (srch = REG_NOTES (insn); srch; srch = XEXP (srch, 1))
- if (XEXP (srch, 1) == note)
- break;
-
- if (srch == NULL_RTX)
- abort ();
-
- XEXP (srch, 1) = XEXP (note, 1);
- }
- }
- /* Once we've seen the note of interest, we need not look at
- the rest of them. */
- break;
- }
- }
+ tree t_save;
+ rtx r_save;
+
+ /* The nonlocal_goto_save_area object is an array of N pointers. The
+ first one is used for the frame pointer save; the rest are sized by
+ STACK_SAVEAREA_MODE. Create a reference to array index 1, the first
+ of the stack save area slots. */
+ t_save = build4 (ARRAY_REF, ptr_type_node, cfun->nonlocal_goto_save_area,
+ integer_one_node, NULL_TREE, NULL_TREE);
+ r_save = expand_expr (t_save, NULL_RTX, VOIDmode, EXPAND_WRITE);
+
+ emit_stack_save (SAVE_NONLOCAL, &r_save, NULL_RTX);
}
-#endif /* SETJMP_VIA_SAVE_AREA */
-
+\f
/* Return an rtx representing the address of an area of memory dynamically
pushed on the stack. This region of memory is always aligned to
a multiple of BIGGEST_ALIGNMENT.
rtx
allocate_dynamic_stack_space (rtx size, rtx target, int known_align)
{
-#ifdef SETJMP_VIA_SAVE_AREA
- rtx setjmpless_size = NULL_RTX;
-#endif
-
/* If we're asking for zero bytes, it doesn't matter what we point
to since we can't dereference it. But return a reasonable
address anyway. */
avoid clobbering the reg save area. Note that the offset of
virtual_incoming_args_rtx includes the preallocated stack args space.
It would be no problem to clobber that, but it's on the wrong side
- of the old save area. */
- {
- rtx dynamic_offset
- = expand_binop (Pmode, sub_optab, virtual_stack_dynamic_rtx,
- stack_pointer_rtx, NULL_RTX, 1, OPTAB_LIB_WIDEN);
+ of the old save area.
+
+ What used to happen is that, since we did not know for sure
+ whether setjmp() was invoked until after RTL generation, we
+ would use reg notes to store the "optimized" size and fix things
+ up later. These days we know this information before we ever
+ start building RTL so the reg notes are unnecessary. */
+ if (!current_function_calls_setjmp)
+ {
+ int align = PREFERRED_STACK_BOUNDARY / BITS_PER_UNIT;
- if (!current_function_calls_setjmp)
- {
- int align = PREFERRED_STACK_BOUNDARY / BITS_PER_UNIT;
-
- /* See optimize_save_area_alloca to understand what is being
- set up here. */
-
- /* ??? Code below assumes that the save area needs maximal
- alignment. This constraint may be too strong. */
- if (PREFERRED_STACK_BOUNDARY != BIGGEST_ALIGNMENT)
- abort ();
-
- if (GET_CODE (size) == CONST_INT)
- {
- HOST_WIDE_INT new = INTVAL (size) / align * align;
-
- if (INTVAL (size) != new)
- setjmpless_size = GEN_INT (new);
- else
- setjmpless_size = size;
- }
- else
- {
- /* Since we know overflow is not possible, we avoid using
- CEIL_DIV_EXPR and use TRUNC_DIV_EXPR instead. */
- setjmpless_size = expand_divmod (0, TRUNC_DIV_EXPR, Pmode, size,
- GEN_INT (align), NULL_RTX, 1);
- setjmpless_size = expand_mult (Pmode, setjmpless_size,
- GEN_INT (align), NULL_RTX, 1);
- }
- /* Our optimization works based upon being able to perform a simple
- transformation of this RTL into a (set REG REG) so make sure things
- did in fact end up in a REG. */
- if (!register_operand (setjmpless_size, Pmode))
- setjmpless_size = force_reg (Pmode, setjmpless_size);
- }
+ /* ??? Code below assumes that the save area needs maximal
+ alignment. This constraint may be too strong. */
+ gcc_assert (PREFERRED_STACK_BOUNDARY == BIGGEST_ALIGNMENT);
- size = expand_binop (Pmode, add_optab, size, dynamic_offset,
- NULL_RTX, 1, OPTAB_LIB_WIDEN);
- }
+ if (GET_CODE (size) == CONST_INT)
+ {
+ HOST_WIDE_INT new = INTVAL (size) / align * align;
+
+ if (INTVAL (size) != new)
+ size = GEN_INT (new);
+ }
+ else
+ {
+ /* Since we know overflow is not possible, we avoid using
+ CEIL_DIV_EXPR and use TRUNC_DIV_EXPR instead. */
+ size = expand_divmod (0, TRUNC_DIV_EXPR, Pmode, size,
+ GEN_INT (align), NULL_RTX, 1);
+ size = expand_mult (Pmode, size,
+ GEN_INT (align), NULL_RTX, 1);
+ }
+ }
+ else
+ {
+ rtx dynamic_offset
+ = expand_binop (Pmode, sub_optab, virtual_stack_dynamic_rtx,
+ stack_pointer_rtx, NULL_RTX, 1, OPTAB_LIB_WIDEN);
+
+ size = expand_binop (Pmode, add_optab, size, dynamic_offset,
+ NULL_RTX, 1, OPTAB_LIB_WIDEN);
+ }
#endif /* SETJMP_VIA_SAVE_AREA */
/* Round the size to a multiple of the required stack alignment.
/* We ought to be called always on the toplevel and stack ought to be aligned
properly. */
- if (stack_pointer_delta % (PREFERRED_STACK_BOUNDARY / BITS_PER_UNIT))
- abort ();
+ gcc_assert (!(stack_pointer_delta
+ % (PREFERRED_STACK_BOUNDARY / BITS_PER_UNIT)));
/* If needed, check that we have the required amount of stack. Take into
account what has already been checked. */
probe_stack_range (STACK_CHECK_MAX_FRAME_SIZE + STACK_CHECK_PROTECT, size);
/* Don't use a TARGET that isn't a pseudo or is the wrong mode. */
- if (target == 0 || GET_CODE (target) != REG
+ if (target == 0 || !REG_P (target)
|| REGNO (target) < FIRST_PSEUDO_REGISTER
|| GET_MODE (target) != Pmode)
target = gen_reg_rtx (Pmode);
}
anti_adjust_stack (size);
-#ifdef SETJMP_VIA_SAVE_AREA
- if (setjmpless_size != NULL_RTX)
- {
- rtx note_target = get_last_insn ();
-
- REG_NOTES (note_target)
- = gen_rtx_EXPR_LIST (REG_SAVE_AREA, setjmpless_size,
- REG_NOTES (note_target));
- }
-#endif /* SETJMP_VIA_SAVE_AREA */
#ifdef STACK_GROWS_DOWNWARD
emit_move_insn (target, virtual_stack_dynamic_rtx);
}
/* Record the new stack level for nonlocal gotos. */
- if (nonlocal_goto_handler_slots != 0)
- emit_stack_save (SAVE_NONLOCAL, &nonlocal_goto_stack_level, NULL_RTX);
+ if (cfun->nonlocal_goto_save_area != 0)
+ update_nonlocal_goto_save_area ();
return target;
}
rtx end_lab = gen_label_rtx ();
rtx temp;
- if (GET_CODE (test_addr) != REG
+ if (!REG_P (test_addr)
|| REGNO (test_addr) < FIRST_PSEUDO_REGISTER)
test_addr = force_reg (Pmode, test_addr);
- emit_note (NOTE_INSN_LOOP_BEG);
emit_jump (test_lab);
emit_label (loop_lab);
emit_stack_probe (test_addr);
- emit_note (NOTE_INSN_LOOP_CONT);
-
#ifdef STACK_GROWS_DOWNWARD
#define CMP_OPCODE GTU
temp = expand_binop (Pmode, sub_optab, test_addr, incr, test_addr,
1, OPTAB_WIDEN);
#endif
- if (temp != test_addr)
- abort ();
+ gcc_assert (temp == test_addr);
emit_label (test_lab);
emit_cmp_and_jump_insns (test_addr, last_addr, CMP_OPCODE,
NULL_RTX, Pmode, 1, loop_lab);
emit_jump (end_lab);
- emit_note (NOTE_INSN_LOOP_END);
emit_label (end_lab);
emit_stack_probe (last_addr);
/* Return an rtx representing the register or memory location
in which a scalar value of data type VALTYPE
was returned by a function call to function FUNC.
- FUNC is a FUNCTION_DECL node if the precise function is known,
- otherwise 0.
+ FUNC is a FUNCTION_DECL, FNTYPE a FUNCTION_TYPE node if the precise
+ function is known, otherwise 0.
OUTGOING is 1 if on a machine with register windows this function
should return the register in which the function will put its result
and 0 otherwise. */
rtx
-hard_function_value (tree valtype, tree func ATTRIBUTE_UNUSED,
+hard_function_value (tree valtype, tree func, tree fntype,
int outgoing ATTRIBUTE_UNUSED)
{
rtx val;
-#ifdef FUNCTION_OUTGOING_VALUE
- if (outgoing)
- val = FUNCTION_OUTGOING_VALUE (valtype, func);
- else
-#endif
- val = FUNCTION_VALUE (valtype, func);
+ val = targetm.calls.function_value (valtype, func ? func : fntype, outgoing);
- if (GET_CODE (val) == REG
+ if (REG_P (val)
&& GET_MODE (val) == BLKmode)
{
unsigned HOST_WIDE_INT bytes = int_size_in_bytes (valtype);
enum machine_mode tmpmode;
/* int_size_in_bytes can return -1. We don't need a check here
- since the value of bytes will be large enough that no mode
- will match and we will abort later in this function. */
+ since the value of bytes will then be large enough that no
+ mode will match anyway. */
for (tmpmode = GET_CLASS_NARROWEST_MODE (MODE_INT);
tmpmode != VOIDmode;
}
/* No suitable mode found. */
- if (tmpmode == VOIDmode)
- abort ();
+ gcc_assert (tmpmode != VOIDmode);
PUT_MODE (val, tmpmode);
}
OSDN Git Service
