/* Output Dwarf2 format symbol table information from GCC.
Copyright (C) 1992, 1993, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
- 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
+ 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
Contributed by Gary Funck (gary@intrepid.com).
Derived from DWARF 1 implementation of Ron Guilmette (rfg@monkeys.com).
Extensively modified by Jason Merrill (jason@cygnus.com).
/* Emit the state save. */
emit_cfa_remember = false;
- cfi_remember = new_cfi ();
+ cfi_remember = new_cfi ();
cfi_remember->dw_cfi_opc = DW_CFA_remember_state;
add_fde_cfi (label, cfi_remember);
}
if (loc.reg == old_cfa.reg && !loc.indirect)
{
/* Construct a "DW_CFA_def_cfa_offset <offset>" instruction, indicating
- the CFA register did not change but the offset did. The data
+ the CFA register did not change but the offset did. The data
factoring for DW_CFA_def_cfa_offset_sf happens in output_cfi, or
in the assembler via the .cfi_def_cfa_offset directive. */
if (loc.offset < 0)
add_fde_cfi (label, cfi);
}
-/* Adjust args_size based on stack adjustment OFFSET. */
+/* Record a stack adjustment of OFFSET bytes. */
static void
-dwarf2out_args_size_adjust (HOST_WIDE_INT offset, const char *label)
+dwarf2out_stack_adjust (HOST_WIDE_INT offset, const char *label)
{
if (cfa.reg == STACK_POINTER_REGNUM)
cfa.offset += offset;
if (cfa_store.reg == STACK_POINTER_REGNUM)
cfa_store.offset += offset;
+ if (ACCUMULATE_OUTGOING_ARGS)
+ return;
+
#ifndef STACK_GROWS_DOWNWARD
offset = -offset;
#endif
}
/* Check INSN to see if it looks like a push or a stack adjustment, and
- make a note of it if it does. EH uses this information to find out how
- much extra space it needs to pop off the stack. */
+ make a note of it if it does. EH uses this information to find out
+ how much extra space it needs to pop off the stack. */
static void
-dwarf2out_stack_adjust (rtx insn, bool after_p)
+dwarf2out_notice_stack_adjust (rtx insn, bool after_p)
{
HOST_WIDE_INT offset;
const char *label;
return;
label = dwarf2out_cfi_label (false);
- dwarf2out_args_size_adjust (offset, label);
+ dwarf2out_stack_adjust (offset, label);
}
#endif
addr = XEXP (set, 0);
gcc_assert (MEM_P (addr));
addr = XEXP (addr, 0);
-
+
/* As documented, only consider extremely simple addresses. */
switch (GET_CODE (addr))
{
&& (!MEM_P (SET_DEST (elem)) || GET_CODE (expr) == SEQUENCE)
&& (RTX_FRAME_RELATED_P (elem) || par_index == 0))
dwarf2out_frame_debug_expr (elem, label);
- else if (!ACCUMULATE_OUTGOING_ARGS
- && GET_CODE (elem) == SET
+ else if (GET_CODE (elem) == SET
&& par_index != 0
&& !RTX_FRAME_RELATED_P (elem))
{
HOST_WIDE_INT offset = stack_adjust_offset (elem, args_size, 0);
if (offset != 0)
- dwarf2out_args_size_adjust (offset, label);
+ dwarf2out_stack_adjust (offset, label);
}
}
return;
if (!NONJUMP_INSN_P (insn) || clobbers_queued_reg_save (insn))
flush_queued_reg_saves ();
- if (! RTX_FRAME_RELATED_P (insn))
+ if (!RTX_FRAME_RELATED_P (insn))
{
+ /* ??? This should be done unconditionally since stack adjustments
+ matter if the stack pointer is not the CFA register anymore but
+ is still used to save registers. */
if (!ACCUMULATE_OUTGOING_ARGS)
- dwarf2out_stack_adjust (insn, after_p);
+ dwarf2out_notice_stack_adjust (insn, after_p);
return;
}
void
dwarf2out_frame_debug_restore_state (void)
{
- dw_cfi_ref cfi = new_cfi ();
+ dw_cfi_ref cfi = new_cfi ();
const char *label = dwarf2out_cfi_label (false);
cfi->dw_cfi_opc = DW_CFA_restore_state;
static void output_aranges (void);
static unsigned int add_ranges_num (int);
static unsigned int add_ranges (const_tree);
-static unsigned int add_ranges_by_labels (const char *, const char *);
+static void add_ranges_by_labels (dw_die_ref, const char *, const char *,
+ bool *);
static void output_ranges (void);
static void output_line_info (void);
static void output_file_names (void);
static void splice_child_die (dw_die_ref, dw_die_ref);
static int file_info_cmp (const void *, const void *);
static dw_loc_list_ref new_loc_list (dw_loc_descr_ref, const char *,
- const char *, const char *, unsigned);
-static void add_loc_descr_to_loc_list (dw_loc_list_ref *, dw_loc_descr_ref,
- const char *, const char *,
- const char *);
+ const char *, const char *);
static void output_loc_list (dw_loc_list_ref);
static char *gen_internal_sym (const char *);
return a->dw_attr_val.v.val_loc_list;
}
+static inline dw_loc_list_ref *
+AT_loc_list_ptr (dw_attr_ref a)
+{
+ gcc_assert (a && AT_class (a) == dw_val_class_loc_list);
+ return &a->dw_attr_val.v.val_loc_list;
+}
+
/* Add an address constant attribute value to a DIE. */
static inline void
temp->last = loc;
}
}
- /* Do not add empty location to the beginning of the list. */
- else if (NOTE_VAR_LOCATION_LOC (loc->var_loc_note) != NULL_RTX)
+ else
{
temp->first = loc;
temp->last = loc;
free (entry);
}
-/* Copy DIE and its ancestors, up to, but not including, the compile unit
+/* Copy DIE and its ancestors, up to, but not including, the compile unit
or type unit entry, to a new tree. Adds the new tree to UNIT and returns
a pointer to the copy of DIE. If DECL_TABLE is provided, it is used
to check if the ancestor has already been copied into UNIT. */
}
/* Return a new location list, given the begin and end range, and the
- expression. gensym tells us whether to generate a new internal symbol for
- this location list node, which is done for the head of the list only. */
+ expression. */
static inline dw_loc_list_ref
new_loc_list (dw_loc_descr_ref expr, const char *begin, const char *end,
- const char *section, unsigned int gensym)
+ const char *section)
{
dw_loc_list_ref retlist = GGC_CNEW (dw_loc_list_node);
retlist->end = end;
retlist->expr = expr;
retlist->section = section;
- if (gensym)
- retlist->ll_symbol = gen_internal_sym ("LLST");
return retlist;
}
-/* Add a location description expression to a location list. */
+/* Generate a new internal symbol for this location list node, if it
+ hasn't got one yet. */
static inline void
-add_loc_descr_to_loc_list (dw_loc_list_ref *list_head, dw_loc_descr_ref descr,
- const char *begin, const char *end,
- const char *section)
+gen_llsym (dw_loc_list_ref list)
{
- dw_loc_list_ref *d;
-
- /* Find the end of the chain. */
- for (d = list_head; (*d) != NULL; d = &(*d)->dw_loc_next)
- ;
-
- /* Add a new location list node to the list. */
- *d = new_loc_list (descr, begin, end, section, 0);
+ gcc_assert (!list->ll_symbol);
+ list->ll_symbol = gen_internal_sym ("LLST");
}
/* Output the location list given to us. */
/* Add a new entry to .debug_ranges corresponding to a pair of
labels. */
-static unsigned int
-add_ranges_by_labels (const char *begin, const char *end)
+static void
+add_ranges_by_labels (dw_die_ref die, const char *begin, const char *end,
+ bool *added)
{
unsigned int in_use = ranges_by_label_in_use;
+ unsigned int offset;
if (in_use == ranges_by_label_allocated)
{
ranges_by_label[in_use].end = end;
ranges_by_label_in_use = in_use + 1;
- return add_ranges_num (-(int)in_use - 1);
+ offset = add_ranges_num (-(int)in_use - 1);
+ if (!*added)
+ {
+ add_AT_range_list (die, DW_AT_ranges, offset);
+ *added = true;
+ }
}
static void
int ndirs;
int idx_offset;
int i;
- int idx;
if (!last_emitted_file)
{
}
/* Emit the directory name table. */
- idx = 1;
idx_offset = dirs[0].length > 0 ? 1 : 0;
for (i = 1 - idx_offset; i < ndirs; i++)
dw2_asm_output_nstring (dirs[i].path,
mem_loc_result = tls_mem_loc_descriptor (rtl);
if (mem_loc_result != 0)
add_loc_descr (&mem_loc_result, new_loc_descr (DW_OP_deref, 0, 0));
+ else
+ {
+ rtx new_rtl = avoid_constant_pool_reference (rtl);
+ if (new_rtl != rtl)
+ return mem_loc_descriptor (new_rtl, mode, initialized);
+ }
break;
case LO_SUM:
pool. */
case CONST:
case SYMBOL_REF:
- /* Alternatively, the symbol in the constant pool might be referenced
- by a different symbol. */
- if (GET_CODE (rtl) == SYMBOL_REF && CONSTANT_POOL_ADDRESS_P (rtl))
- {
- bool marked;
- rtx tmp = get_pool_constant_mark (rtl, &marked);
-
- if (GET_CODE (tmp) == SYMBOL_REF)
- {
- rtl = tmp;
- if (CONSTANT_POOL_ADDRESS_P (tmp))
- get_pool_constant_mark (tmp, &marked);
- else
- marked = true;
- }
-
- /* If all references to this pool constant were optimized away,
- it was not output and thus we can't represent it.
- FIXME: might try to use DW_OP_const_value here, though
- DW_OP_piece complicates it. */
- if (!marked)
- {
- expansion_failed (NULL_TREE, rtl,
- "Constant was removed from constant pool.\n");
- return 0;
- }
- }
-
if (GET_CODE (rtl) == SYMBOL_REF
&& SYMBOL_REF_TLS_MODEL (rtl) != TLS_MODEL_NONE)
{
op = DW_OP_div;
goto do_binop;
- case MOD:
+ case UMOD:
op = DW_OP_mod;
goto do_binop;
add_loc_descr (&mem_loc_result, new_loc_descr (op, 0, 0));
break;
+ case MOD:
+ op0 = mem_loc_descriptor (XEXP (rtl, 0), mode,
+ VAR_INIT_STATUS_INITIALIZED);
+ op1 = mem_loc_descriptor (XEXP (rtl, 1), mode,
+ VAR_INIT_STATUS_INITIALIZED);
+
+ if (op0 == 0 || op1 == 0)
+ break;
+
+ mem_loc_result = op0;
+ add_loc_descr (&mem_loc_result, op1);
+ add_loc_descr (&mem_loc_result, new_loc_descr (DW_OP_over, 0, 0));
+ add_loc_descr (&mem_loc_result, new_loc_descr (DW_OP_over, 0, 0));
+ add_loc_descr (&mem_loc_result, new_loc_descr (DW_OP_div, 0, 0));
+ add_loc_descr (&mem_loc_result, new_loc_descr (DW_OP_mul, 0, 0));
+ add_loc_descr (&mem_loc_result, new_loc_descr (DW_OP_minus, 0, 0));
+ break;
+
case NOT:
op = DW_OP_not;
goto do_unop;
case US_MULT:
case SS_DIV:
case US_DIV:
+ case SS_PLUS:
+ case US_PLUS:
+ case SS_MINUS:
+ case US_MINUS:
+ case SS_NEG:
+ case US_NEG:
+ case SS_ABS:
+ case SS_ASHIFT:
+ case US_ASHIFT:
+ case SS_TRUNCATE:
+ case US_TRUNCATE:
case UDIV:
- case UMOD:
case UNORDERED:
case ORDERED:
case UNEQ:
initialized);
if (loc_result == NULL)
loc_result = tls_mem_loc_descriptor (rtl);
+ if (loc_result == NULL)
+ {
+ rtx new_rtl = avoid_constant_pool_reference (rtl);
+ if (new_rtl != rtl)
+ loc_result = loc_descriptor (new_rtl, mode, initialized);
+ }
break;
case CONCAT:
break;
case CONST_DOUBLE:
+ if (mode == VOIDmode)
+ mode = GET_MODE (rtl);
+
if (mode != VOIDmode && (dwarf_version >= 4 || !dwarf_strict))
{
+ gcc_assert (mode == GET_MODE (rtl) || VOIDmode == GET_MODE (rtl));
+
/* Note that a CONST_DOUBLE rtx could represent either an integer
or a floating-point constant. A CONST_DOUBLE is used whenever
the constant requires more than one word in order to be
adequately represented. We output CONST_DOUBLEs as blocks. */
- if (GET_MODE (rtl) != VOIDmode)
- mode = GET_MODE (rtl);
-
loc_result = new_loc_descr (DW_OP_implicit_value,
GET_MODE_SIZE (mode), 0);
if (SCALAR_FLOAT_MODE_P (mode))
break;
case CONST_VECTOR:
+ if (mode == VOIDmode)
+ mode = GET_MODE (rtl);
+
if (mode != VOIDmode && (dwarf_version >= 4 || !dwarf_strict))
{
unsigned int elt_size = GET_MODE_UNIT_SIZE (GET_MODE (rtl));
unsigned int i;
unsigned char *p;
- mode = GET_MODE (rtl);
+ gcc_assert (mode == GET_MODE (rtl) || VOIDmode == GET_MODE (rtl));
switch (GET_MODE_CLASS (mode))
{
case MODE_VECTOR_INT:
if (mode != VOIDmode && GET_MODE_SIZE (mode) == DWARF2_ADDR_SIZE
&& (dwarf_version >= 4 || !dwarf_strict))
{
- loc_result = new_loc_descr (DW_OP_implicit_value,
- DWARF2_ADDR_SIZE, 0);
- loc_result->dw_loc_oprnd2.val_class = dw_val_class_addr;
- loc_result->dw_loc_oprnd2.v.val_addr = rtl;
+ loc_result = new_loc_descr (DW_OP_addr, 0, 0);
+ loc_result->dw_loc_oprnd1.val_class = dw_val_class_addr;
+ loc_result->dw_loc_oprnd1.v.val_addr = rtl;
+ add_loc_descr (&loc_result, new_loc_descr (DW_OP_stack_value, 0, 0));
VEC_safe_push (rtx, gc, used_rtx_array, rtl);
}
break;
&& DECL_BY_REFERENCE (decl));
}
-/* Return single element location list containing loc descr REF. */
-
-static dw_loc_list_ref
-single_element_loc_list (dw_loc_descr_ref ref)
-{
- return new_loc_list (ref, NULL, NULL, NULL, 0);
-}
-
/* Helper function for dw_loc_list. Compute proper Dwarf location descriptor
for VARLOC. */
mode = GET_MODE (varloc);
if (MEM_P (varloc))
{
- varloc = XEXP (varloc, 0);
- have_address = 1;
+ rtx addr = XEXP (varloc, 0);
+ descr = mem_loc_descriptor (addr, mode, initialized);
+ if (descr)
+ have_address = 1;
+ else
+ {
+ rtx x = avoid_constant_pool_reference (varloc);
+ if (x != varloc)
+ descr = mem_loc_descriptor (x, mode, initialized);
+ }
}
- descr = mem_loc_descriptor (varloc, mode, initialized);
+ else
+ descr = mem_loc_descriptor (varloc, mode, initialized);
}
else
return 0;
return descr;
}
-/* Return dwarf representation of location list representing for
- LOC_LIST of DECL. WANT_ADDRESS has the same meaning as in
- loc_list_from_tree function. */
+/* Return the dwarf representation of the location list LOC_LIST of
+ DECL. WANT_ADDRESS has the same meaning as in loc_list_from_tree
+ function. */
static dw_loc_list_ref
-dw_loc_list (var_loc_list * loc_list, tree decl, int want_address)
+dw_loc_list (var_loc_list *loc_list, tree decl, int want_address)
{
const char *endname, *secname;
- dw_loc_list_ref list;
rtx varloc;
enum var_init_status initialized;
struct var_loc_node *node;
dw_loc_descr_ref descr;
char label_id[MAX_ARTIFICIAL_LABEL_BYTES];
+ dw_loc_list_ref list = NULL;
+ dw_loc_list_ref *listp = &list;
/* Now that we know what section we are using for a base,
actually construct the list of locations.
This means we have to special case the last node, and generate
a range of [last location start, end of function label]. */
- node = loc_list->first;
secname = secname_for_decl (decl);
- if (NOTE_VAR_LOCATION_LOC (node->var_loc_note))
- initialized = NOTE_VAR_LOCATION_STATUS (node->var_loc_note);
- else
- initialized = VAR_INIT_STATUS_INITIALIZED;
- varloc = NOTE_VAR_LOCATION (node->var_loc_note);
- descr = dw_loc_list_1 (decl, varloc, want_address, initialized);
-
- if (loc_list && loc_list->first != loc_list->last)
- list = new_loc_list (descr, node->label, node->next->label, secname, 1);
- else
- return single_element_loc_list (descr);
- node = node->next;
-
- if (!node)
- return NULL;
-
- for (; node->next; node = node->next)
+ for (node = loc_list->first; node->next; node = node->next)
if (NOTE_VAR_LOCATION_LOC (node->var_loc_note) != NULL_RTX)
{
/* The variable has a location between NODE->LABEL and
initialized = NOTE_VAR_LOCATION_STATUS (node->var_loc_note);
varloc = NOTE_VAR_LOCATION (node->var_loc_note);
descr = dw_loc_list_1 (decl, varloc, want_address, initialized);
- add_loc_descr_to_loc_list (&list, descr,
- node->label, node->next->label, secname);
+ if (descr)
+ {
+ *listp = new_loc_list (descr, node->label, node->next->label,
+ secname);
+ listp = &(*listp)->dw_loc_next;
+ }
}
/* If the variable has a location at the last label
it keeps its location until the end of function. */
if (NOTE_VAR_LOCATION_LOC (node->var_loc_note) != NULL_RTX)
{
- if (!current_function_decl)
- endname = text_end_label;
- else
- {
- ASM_GENERATE_INTERNAL_LABEL (label_id, FUNC_END_LABEL,
- current_function_funcdef_no);
- endname = ggc_strdup (label_id);
- }
-
initialized = NOTE_VAR_LOCATION_STATUS (node->var_loc_note);
varloc = NOTE_VAR_LOCATION (node->var_loc_note);
descr = dw_loc_list_1 (decl, varloc, want_address, initialized);
- add_loc_descr_to_loc_list (&list, descr, node->label, endname, secname);
+ if (descr)
+ {
+ if (!current_function_decl)
+ endname = text_end_label;
+ else
+ {
+ ASM_GENERATE_INTERNAL_LABEL (label_id, FUNC_END_LABEL,
+ current_function_funcdef_no);
+ endname = ggc_strdup (label_id);
+ }
+
+ *listp = new_loc_list (descr, node->label, endname, secname);
+ listp = &(*listp)->dw_loc_next;
+ }
}
+
+ /* Try to avoid the overhead of a location list emitting a location
+ expression instead, but only if we didn't have more than one
+ location entry in the first place. If some entries were not
+ representable, we don't want to pretend a single entry that was
+ applies to the entire scope in which the variable is
+ available. */
+ if (list && loc_list->first->next)
+ gen_llsym (list);
+
return list;
}
static bool
single_element_loc_list_p (dw_loc_list_ref list)
{
- return (!list->dw_loc_next && !list->begin && !list->end);
+ gcc_assert (!list->dw_loc_next || list->ll_symbol);
+ return !list->ll_symbol;
}
/* To each location in list LIST add loc descr REF. */
TODO: We handle only simple cases of RET or LIST having at most one
element. General case would inolve sorting the lists in program order
- and merging them that will need some additional work.
+ and merging them that will need some additional work.
Adding that will improve quality of debug info especially for SRA-ed
structures. */
case RESULT_DECL:
case FUNCTION_DECL:
{
- rtx rtl = rtl_for_decl_location (loc);
+ rtx rtl;
var_loc_list *loc_list = lookup_decl_loc (loc);
- if (loc_list && loc_list->first
- && (list_ret = dw_loc_list (loc_list, loc, want_address)))
- have_address = want_address != 0;
- else if (rtl == NULL_RTX)
+ if (loc_list && loc_list->first)
+ {
+ list_ret = dw_loc_list (loc_list, loc, want_address);
+ have_address = want_address != 0;
+ break;
+ }
+ rtl = rtl_for_decl_location (loc);
+ if (rtl == NULL_RTX)
{
expansion_failed (loc, NULL_RTX, "DECL has no RTL");
return 0;
if (bytepos > 0)
add_loc_descr_to_each (list_ret, new_loc_descr (DW_OP_plus_uconst, bytepos, 0));
else if (bytepos < 0)
- loc_list_plus_const (list_ret, bytepos);
+ loc_list_plus_const (list_ret, bytepos);
have_address = 1;
break;
case CEIL_DIV_EXPR:
case ROUND_DIV_EXPR:
case TRUNC_DIV_EXPR:
+ if (TYPE_UNSIGNED (TREE_TYPE (loc)))
+ return 0;
op = DW_OP_div;
goto do_binop;
case CEIL_MOD_EXPR:
case ROUND_MOD_EXPR:
case TRUNC_MOD_EXPR:
- op = DW_OP_mod;
- goto do_binop;
+ if (TYPE_UNSIGNED (TREE_TYPE (loc)))
+ {
+ op = DW_OP_mod;
+ goto do_binop;
+ }
+ list_ret = loc_list_from_tree (TREE_OPERAND (loc, 0), 0);
+ list_ret1 = loc_list_from_tree (TREE_OPERAND (loc, 1), 0);
+ if (list_ret == 0 || list_ret1 == 0)
+ return 0;
+
+ add_loc_list (&list_ret, list_ret1);
+ if (list_ret == 0)
+ return 0;
+ add_loc_descr_to_each (list_ret, new_loc_descr (DW_OP_over, 0, 0));
+ add_loc_descr_to_each (list_ret, new_loc_descr (DW_OP_over, 0, 0));
+ add_loc_descr_to_each (list_ret, new_loc_descr (DW_OP_div, 0, 0));
+ add_loc_descr_to_each (list_ret, new_loc_descr (DW_OP_mul, 0, 0));
+ add_loc_descr_to_each (list_ret, new_loc_descr (DW_OP_minus, 0, 0));
+ break;
case MULT_EXPR:
op = DW_OP_mul;
add_loc_descr_to_each (list_ret, new_loc_descr (op, size, 0));
}
if (ret)
- list_ret = single_element_loc_list (ret);
+ list_ret = new_loc_list (ret, NULL, NULL, NULL);
return list_ret;
}
else
{
enum dwarf_location_atom op;
-
+
/* The DWARF2 standard says that we should assume that the structure
address is already on the stack, so we can specify a structure
field address by using DW_OP_plus_uconst. */
-
+
#ifdef MIPS_DEBUGGING_INFO
/* ??? The SGI dwarf reader does not handle the DW_OP_plus_uconst
operator correctly. It works only if we leave the offset on the
#else
op = DW_OP_plus_uconst;
#endif
-
+
loc_descr = new_loc_descr (op, offset, 0);
}
}
return true;
case CONST_STRING:
- resolve_one_addr (&rtl, NULL);
- add_AT_addr (die, DW_AT_const_value, rtl);
- VEC_safe_push (rtx, gc, used_rtx_array, rtl);
- return true;
+ if (dwarf_version >= 4 || !dwarf_strict)
+ {
+ dw_loc_descr_ref loc_result;
+ resolve_one_addr (&rtl, NULL);
+ rtl_addr:
+ loc_result = new_loc_descr (DW_OP_addr, 0, 0);
+ loc_result->dw_loc_oprnd1.val_class = dw_val_class_addr;
+ loc_result->dw_loc_oprnd1.v.val_addr = rtl;
+ add_loc_descr (&loc_result, new_loc_descr (DW_OP_stack_value, 0, 0));
+ add_AT_loc (die, DW_AT_location, loc_result);
+ VEC_safe_push (rtx, gc, used_rtx_array, rtl);
+ return true;
+ }
+ return false;
case CONST:
if (CONSTANT_P (XEXP (rtl, 0)))
if (!const_ok_for_output (rtl))
return false;
case LABEL_REF:
- add_AT_addr (die, DW_AT_const_value, rtl);
- VEC_safe_push (rtx, gc, used_rtx_array, rtl);
- return true;
+ if (dwarf_version >= 4 || !dwarf_strict)
+ goto rtl_addr;
+ return false;
case PLUS:
/* In cases where an inlined instance of an inline function is passed
if (rtl)
rtl = avoid_constant_pool_reference (rtl);
+ /* Try harder to get a rtl. If this symbol ends up not being emitted
+ in the current CU, resolve_addr will remove the expression referencing
+ it. */
+ if (rtl == NULL_RTX
+ && TREE_CODE (decl) == VAR_DECL
+ && !DECL_EXTERNAL (decl)
+ && TREE_STATIC (decl)
+ && DECL_NAME (decl)
+ && !DECL_HARD_REGISTER (decl)
+ && DECL_MODE (decl) != VOIDmode)
+ {
+ rtl = DECL_RTL (decl);
+ /* Reset DECL_RTL back, as various parts of the compiler expects
+ DECL_RTL set meaning it is actually going to be output. */
+ SET_DECL_RTL (decl, NULL);
+ if (!MEM_P (rtl)
+ || GET_CODE (XEXP (rtl, 0)) != SYMBOL_REF
+ || SYMBOL_REF_DECL (XEXP (rtl, 0)) != decl)
+ rtl = NULL_RTX;
+ }
+
return rtl;
}
a constant value. That way we are better to use add_const_value_attribute
rather than expanding constant value equivalent. */
loc_list = lookup_decl_loc (decl);
- if (loc_list && loc_list->first && loc_list->first == loc_list->last)
+ if (loc_list
+ && loc_list->first
+ && loc_list->first == loc_list->last
+ && NOTE_VAR_LOCATION (loc_list->first->var_loc_note)
+ && NOTE_VAR_LOCATION_LOC (loc_list->first->var_loc_note))
{
- enum var_init_status status;
struct var_loc_node *node;
node = loc_list->first;
- status = NOTE_VAR_LOCATION_STATUS (node->var_loc_note);
- rtl = NOTE_VAR_LOCATION (node->var_loc_note);
- if (GET_CODE (rtl) == VAR_LOCATION
- && GET_CODE (XEXP (rtl, 1)) != PARALLEL)
- rtl = XEXP (XEXP (rtl, 1), 0);
+ rtl = NOTE_VAR_LOCATION_LOC (node->var_loc_note);
+ if (GET_CODE (rtl) != PARALLEL)
+ rtl = XEXP (rtl, 0);
if ((CONSTANT_P (rtl) || GET_CODE (rtl) == CONST_STRING)
&& add_const_value_attribute (die, rtl))
return true;
if (!cfa_equal_p (&last_cfa, &next_cfa))
{
*list_tail = new_loc_list (build_cfa_loc (&last_cfa, offset),
- start_label, last_label, section,
- list == NULL);
+ start_label, last_label, section);
list_tail = &(*list_tail)->dw_loc_next;
last_cfa = next_cfa;
if (!cfa_equal_p (&last_cfa, &next_cfa))
{
*list_tail = new_loc_list (build_cfa_loc (&last_cfa, offset),
- start_label, last_label, section,
- list == NULL);
+ start_label, last_label, section);
list_tail = &(*list_tail)->dw_loc_next;
start_label = last_label;
}
+
*list_tail = new_loc_list (build_cfa_loc (&next_cfa, offset),
- start_label, fde->dw_fde_end, section,
- list == NULL);
+ start_label, fde->dw_fde_end, section);
+
+ if (list && list->dw_loc_next)
+ gen_llsym (list);
return list;
}
0));
/* GNU extension: Record what type this method came from originally. */
- if (debug_info_level > DINFO_LEVEL_TERSE)
+ if (debug_info_level > DINFO_LEVEL_TERSE
+ && DECL_CONTEXT (func_decl))
add_AT_die_ref (die, DW_AT_containing_type,
lookup_type_die (DECL_CONTEXT (func_decl)));
}
add_subscript_info (array_die, type, collapse_nested_arrays);
/* Add representation of the type of the elements of this array type and
- emit the corresponding DIE if we haven't done it already. */
+ emit the corresponding DIE if we haven't done it already. */
element_type = TREE_TYPE (type);
if (collapse_nested_arrays)
while (TREE_CODE (element_type) == ARRAY_TYPE)
/* If we're trying to avoid duplicate debug info, we may not have
emitted the member decl for this function. Emit it now. */
- if (TYPE_DECL_SUPPRESS_DEBUG (TYPE_STUB_DECL (type))
+ if (TYPE_STUB_DECL (type)
+ && TYPE_DECL_SUPPRESS_DEBUG (TYPE_STUB_DECL (type))
&& ! lookup_decl_die (member))
{
dw_die_ref type_die;
dw_die_ref old_die;
tree save_fn;
tree context;
- int was_abstract = DECL_ABSTRACT (decl);
+ int was_abstract;
htab_t old_decl_loc_table;
/* Make sure we have the actual abstract inline, not a clone. */
current_function_decl = decl;
push_cfun (DECL_STRUCT_FUNCTION (decl));
+ was_abstract = DECL_ABSTRACT (decl);
set_decl_abstract_flags (decl, 1);
dwarf2out_decl (decl);
if (! was_abstract)
of the pack. Note that the set of pack arguments can be empty.
In that case, the DW_TAG_GNU_formal_parameter_pack DIE will not have any
children DIE.
-
+
Otherwise, we just consider the parameters of DECL. */
while (generic_decl_parm || parm)
{
dw_die_ref old_die = decl ? lookup_decl_die (decl) : NULL;
dw_die_ref origin_die;
int declaration = (DECL_EXTERNAL (decl_or_origin)
- /* If DECL is COMDAT and has not actually been
- emitted, we cannot take its address; there
- might end up being no definition anywhere in
- the program. For example, consider the C++
- test case:
-
- template <class T>
- struct S { static const int i = 7; };
-
- template <class T>
- const int S<T>::i;
-
- int f() { return S<int>::i; }
-
- Here, S<int>::i is not DECL_EXTERNAL, but no
- definition is required, so the compiler will
- not emit a definition. */
- || (TREE_CODE (decl_or_origin) == VAR_DECL
- && DECL_COMDAT (decl_or_origin)
- && !TREE_ASM_WRITTEN (decl_or_origin))
|| class_or_namespace_scope_p (context_die));
if (!origin)
of a data member. */
if (com_decl)
{
- tree field;
dw_die_ref com_die;
dw_loc_list_ref loc;
die_node com_die_arg;
= htab_create_ggc (10, common_block_die_table_hash,
common_block_die_table_eq, NULL);
- field = TREE_OPERAND (DECL_VALUE_EXPR (decl), 0);
com_die_arg.decl_id = DECL_UID (com_decl);
com_die_arg.die_parent = context_die;
com_die = (dw_die_ref) htab_find (common_block_die_table, &com_die_arg);
and if we already emitted a DIE for it, don't emit a second
DIE for it again. */
if (old_die
- && declaration
- && old_die->die_parent == context_die)
+ && declaration)
return;
/* For static data members, the declaration in the class is supposed
{
/* Find die that represents this context. */
if (TYPE_P (context))
- return force_type_die (context);
+ return force_type_die (TYPE_MAIN_VARIANT (context));
else
return force_decl_die (context);
}
/* Replace DW_AT_name for the decl with name. */
-
+
static void
dwarf2out_set_name (tree decl, tree name)
{
breaking out types into comdat sections, do this
for all type definitions. */
if (die->die_tag == DW_TAG_array_type
- || (dwarf_version >= 4
+ || (dwarf_version >= 4
&& is_type_die (die) && ! is_declaration_die (die)))
FOR_EACH_CHILD (die, c, prune_unused_types_mark (c, 1));
else
{
dw_die_ref c;
dw_attr_ref a;
- dw_loc_list_ref curr;
+ dw_loc_list_ref *curr;
unsigned ix;
for (ix = 0; VEC_iterate (dw_attr_node, die->die_attr, ix, a); ix++)
switch (AT_class (a))
{
case dw_val_class_loc_list:
- for (curr = AT_loc_list (a); curr != NULL; curr = curr->dw_loc_next)
- if (!resolve_addr_in_expr (curr->expr))
- curr->expr = NULL;
+ curr = AT_loc_list_ptr (a);
+ while (*curr)
+ {
+ if (!resolve_addr_in_expr ((*curr)->expr))
+ {
+ dw_loc_list_ref next = (*curr)->dw_loc_next;
+ if (next && (*curr)->ll_symbol)
+ {
+ gcc_assert (!next->ll_symbol);
+ next->ll_symbol = (*curr)->ll_symbol;
+ }
+ *curr = next;
+ }
+ else
+ curr = &(*curr)->dw_loc_next;
+ }
+ if (!AT_loc_list (a))
+ {
+ remove_AT (die, a->dw_attr);
+ ix--;
+ }
break;
case dw_val_class_loc:
if (!resolve_addr_in_expr (AT_loc (a)))
- a->dw_attr_val.v.val_loc = NULL;
+ {
+ remove_AT (die, a->dw_attr);
+ ix--;
+ }
break;
case dw_val_class_addr:
if (a->dw_attr == DW_AT_const_value
&& resolve_one_addr (&a->dw_attr_val.v.val_addr, NULL))
{
- a->dw_attr = DW_AT_location;
- a->dw_attr_val.val_class = dw_val_class_loc;
- a->dw_attr_val.v.val_loc = NULL;
+ remove_AT (die, a->dw_attr);
+ ix--;
}
break;
default:
else
{
unsigned fde_idx = 0;
+ bool range_list_added = false;
/* We need to give .debug_loc and .debug_ranges an appropriate
"base address". Use zero so that these addresses become
add_AT_addr (comp_unit_die, DW_AT_low_pc, const0_rtx);
add_AT_addr (comp_unit_die, DW_AT_entry_pc, const0_rtx);
- add_AT_range_list (comp_unit_die, DW_AT_ranges,
- add_ranges_by_labels (text_section_label,
- text_end_label));
- if (flag_reorder_blocks_and_partition)
- add_ranges_by_labels (cold_text_section_label,
- cold_end_label);
+ if (text_section_used)
+ add_ranges_by_labels (comp_unit_die, text_section_label,
+ text_end_label, &range_list_added);
+ if (flag_reorder_blocks_and_partition && cold_text_section_used)
+ add_ranges_by_labels (comp_unit_die, cold_text_section_label,
+ cold_end_label, &range_list_added);
for (fde_idx = 0; fde_idx < fde_table_in_use; fde_idx++)
{
if (fde->dw_fde_switched_sections)
{
if (!fde->in_std_section)
- add_ranges_by_labels (fde->dw_fde_hot_section_label,
- fde->dw_fde_hot_section_end_label);
+ add_ranges_by_labels (comp_unit_die,
+ fde->dw_fde_hot_section_label,
+ fde->dw_fde_hot_section_end_label,
+ &range_list_added);
if (!fde->cold_in_std_section)
- add_ranges_by_labels (fde->dw_fde_unlikely_section_label,
- fde->dw_fde_unlikely_section_end_label);
+ add_ranges_by_labels (comp_unit_die,
+ fde->dw_fde_unlikely_section_label,
+ fde->dw_fde_unlikely_section_end_label,
+ &range_list_added);
}
else if (!fde->in_std_section)
- add_ranges_by_labels (fde->dw_fde_begin,
- fde->dw_fde_end);
+ add_ranges_by_labels (comp_unit_die, fde->dw_fde_begin,
+ fde->dw_fde_end, &range_list_added);
}
- add_ranges (NULL);
+ if (range_list_added)
+ add_ranges (NULL);
}
/* Output location list section if necessary. */
OSDN Git Service
