-Wsign-compare -Wsign-conversion -Wstack-protector @gol
-Wstrict-aliasing -Wstrict-aliasing=n @gol
-Wstrict-overflow -Wstrict-overflow=@var{n} @gol
--Wsuggest-attribute=@r{[}const@r{|}pure@r{]} @gol
-Wswitch -Wswitch-default -Wswitch-enum -Wsync-nand @gol
-Wsystem-headers -Wtrigraphs -Wtype-limits -Wundef -Wuninitialized @gol
-Wunknown-pragmas -Wno-pragmas @gol
-fgcse-sm -fif-conversion -fif-conversion2 -findirect-inlining @gol
-finline-functions -finline-functions-called-once -finline-limit=@var{n} @gol
-finline-small-functions -fipa-cp -fipa-cp-clone -fipa-matrix-reorg -fipa-pta @gol
--fipa-profile -fipa-pure-const -fipa-reference -fipa-struct-reorg @gol
+-fipa-pure-const -fipa-reference -fipa-struct-reorg @gol
-fipa-type-escape -fira-algorithm=@var{algorithm} @gol
-fira-region=@var{region} -fira-coalesce @gol
-fira-loop-pressure -fno-ira-share-save-slots @gol
@item Directory Options
@xref{Directory Options,,Options for Directory Search}.
-@gccoptlist{-B@var{prefix} -I@var{dir} -iplugindir=@var{dir}}
--iquote@var{dir} -L@var{dir} -specs=@var{file} -I-
---sysroot=@var{dir}
+@gccoptlist{-B@var{prefix} -I@var{dir} -iquote@var{dir} -L@var{dir}
+-specs=@var{file} -I- --sysroot=@var{dir}}
@item Machine Dependent Options
@xref{Submodel Options,,Hardware Models and Configurations}.
-mprefergot -musermode -multcost=@var{number} -mdiv=@var{strategy} @gol
-mdivsi3_libfunc=@var{name} -mfixed-range=@var{register-range} @gol
-madjust-unroll -mindexed-addressing -mgettrcost=@var{number} -mpt-fixed @gol
--maccumulate-outgoing-args -minvalid-symbols}
+-minvalid-symbols}
@emph{SPARC Options}
@gccoptlist{-mcpu=@var{cpu-type} @gol
@w{@uref{http://gcc.gnu.org/c99status.html}} for more information. The
names @samp{c9x} and @samp{iso9899:199x} are deprecated.
-@item c1x
-ISO C1X, the draft of the next revision of the ISO C standard.
-Support is limited and experimental and features enabled by this
-option may be changed or removed if changed in or removed from the
-standard draft.
-
@item gnu90
@itemx gnu89
GNU dialect of ISO C90 (including some C99 features). This
GNU dialect of ISO C99. When ISO C99 is fully implemented in GCC,
this will become the default. The name @samp{gnu9x} is deprecated.
-@item gnu1x
-GNU dialect of ISO C1X. Support is limited and experimental and
-features enabled by this option may be changed or removed if changed
-in or removed from the standard draft.
-
@item c++98
The 1998 ISO C++ standard plus amendments. Same as @option{-ansi} for
C++ code.
language-specific options also refer to @ref{C++ Dialect Options} and
@ref{Objective-C and Objective-C++ Dialect Options}.
-When an unrecognized warning label is requested (e.g.,
-@option{-Wunknown-warning}), GCC will emit a diagnostic stating
-that the option is not recognized. However, if the @samp{-Wno-} form
-is used, the behavior is slightly different: No diagnostic will be
-produced for @option{-Wno-unknown-warning} unless other diagnostics
-are being produced. This allows the use of new @option{-Wno-} options
-with old compilers, but if something goes wrong, the compiler will
-warn that an unrecognized option was used.
-
@table @gcctabopt
@item -pedantic
@opindex pedantic
false positives.
@end table
-@item -Wsuggest-attribute=@r{[}const@r{|}pure@r{]}
-@opindex Wsuggest-attribute=
-@opindex Wno-suggest-attribute=
-Warn for cases where adding an attribute may be beneficial. The
-attributes currently supported are listed below.
-
-@table @gcctabopt
-@item -Wsuggest-attribute=pure
-@itemx -Wsuggest-attribute=const
-@opindex Wsuggest-attribute=pure
-@opindex Wno-suggest-attribute=pure
-@opindex Wsuggest-attribute=const
-@opindex Wno-suggest-attribute=const
-
-Warn about functions which might be candidates for attributes
-@code{pure} or @code{const}. The compiler only warns for functions
-visible in other compilation units or if it cannot prove that the
-function returns normally. A function returns normally if it doesn't
-contain an infinite loop nor returns abnormally by throwing, calling
-@code{abort()} or trapping. This analysis requires option
-@option{-fipa-pure-const}, which is enabled by default at @option{-O}
-and higher. Higher optimization levels improve the accuracy of the
-analysis.
-@end table
-
@item -Warray-bounds
@opindex Wno-array-bounds
@opindex Warray-bounds
This option is only active when @option{-ftree-vrp} is active
-(default for @option{-O2} and above). It warns about subscripts to arrays
+(default for -O2 and above). It warns about subscripts to arrays
that are always out of bounds. This warning is enabled by @option{-Wall}.
@item -Wno-div-by-zero
-fif-conversion2 @gol
-fif-conversion @gol
-fipa-pure-const @gol
--fipa-profile @gol
-fipa-reference @gol
-fmerge-constants
-fsplit-wide-types @gol
@item -fipa-pta
@opindex fipa-pta
-Perform interprocedural pointer analysis and interprocedural modification
-and reference analysis. This option can cause excessive memory and
-compile-time usage on large compilation units. It is not enabled by
-default at any optimization level.
-
-@item -fipa-profile
-@opindex fipa-profile
-Perform interprocedural profile propagation. The functions called only from
-cold functions are marked as cold. Also functions executed once (such as
-@code{cold}, @code{noreturn}, static constructors or destructors) are identified. Cold
-functions and loop less parts of functions executed once are then optimized for
-size.
-Enabled by default at @option{-O} and higher.
+Perform interprocedural pointer analysis. This option is experimental
+and does not affect generated code.
@item -fipa-cp
@opindex fipa-cp
If you really need to change the search order for system directories,
use the @option{-nostdinc} and/or @option{-isystem} options.
-@item -iplugindir=@var{dir}
-Set the directory to search for plugins which are passed
-by @option{-fplugin=@var{name}} instead of
-@option{-fplugin=@var{path}/@var{name}.so}. This option is not meant
-to be used by the user, but only passed by the driver.
-
@item -iquote@var{dir}
@opindex iquote
Add the directory @var{dir} to the head of the list of directories to
slows down the case of larger dividends. inv20u assumes the case of a such
a small dividend to be unlikely, and inv20l assumes it to be likely.
-@item -maccumulate-outgoing-args
-@opindex maccumulate-outgoing-args
-Reserve space once for outgoing arguments in the function prologue rather
-than around each call. Generally beneficial for performance and size. Also
-needed for unwinding to avoid changing the stack frame around conditional code.
-
@item -mdivsi3_libfunc=@var{name}
@opindex mdivsi3_libfunc=@var{name}
Set the name of the library function used for 32 bit signed division to
OSDN Git Service
