/* Definitions of various defaults for how to do assembler output
(most of which are designed to be appropriate for GAS or for
some BSD assembler).
-
- Written by Ron Guilmette (rfg@ncd.com)
-
-Copyright (C) 1992 Free Software Foundation, Inc.
+ Copyright (C) 1992, 1996, 1997, 1998, 1999, 2000
+ Free Software Foundation, Inc.
+ Contributed by Ron Guilmette (rfg@monkeys.com)
This file is part of GNU CC.
You should have received a copy of the GNU General Public License
along with GNU CC; see the file COPYING. If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */
+the Free Software Foundation, 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA. */
+
+#ifndef GCC_DEFAULTS_H
+#define GCC_DEFAULTS_H
/* Store in OUTPUT a string (made with alloca) containing
an assembler-name for a local static variable or function named NAME.
#endif
#ifndef ASM_STABD_OP
-#define ASM_STABD_OP ".stabd"
+#define ASM_STABD_OP "\t.stabd\t"
#endif
/* This is how to output an element of a case-vector that is absolute.
} while (0)
#endif
-/* This is how to output an element of a case-vector that is relative.
- Some targets don't use this, but we have to define it anyway. */
-
-#ifndef ASM_OUTPUT_ADDR_DIFF_ELT
-#define ASM_OUTPUT_ADDR_DIFF_ELT(FILE, VALUE, REL) \
-do { fprintf (FILE, "\t%s\t", ASM_SHORT); \
- ASM_GENERATE_INTERNAL_LABEL (FILE, "L", (VALUE)); \
- fputc ('-', FILE); \
- ASM_GENERATE_INTERNAL_LABEL (FILE, "L", (REL)); \
- fputc ('\n', FILE); \
- } while (0)
+/* Provide default for ASM_OUTPUT_ALTERNATE_LABEL_NAME. */
+#ifndef ASM_OUTPUT_ALTERNATE_LABEL_NAME
+#define ASM_OUTPUT_ALTERNATE_LABEL_NAME(FILE,INSN) \
+do { ASM_OUTPUT_LABEL(FILE,LABEL_ALTERNATE_NAME (INSN)); } while (0)
#endif
/* choose a reasonable default for ASM_OUTPUT_ASCII. */
#define ASM_OUTPUT_ASCII(MYFILE, MYSTRING, MYLENGTH) \
do { \
FILE *_hide_asm_out_file = (MYFILE); \
- unsigned char *_hide_p = (unsigned char *) (MYSTRING); \
+ const unsigned char *_hide_p = (const unsigned char *) (MYSTRING); \
int _hide_thissize = (MYLENGTH); \
{ \
FILE *asm_out_file = _hide_asm_out_file; \
- unsigned char *p = _hide_p; \
+ const unsigned char *p = _hide_p; \
int thissize = _hide_thissize; \
int i; \
fprintf (asm_out_file, "\t.ascii \""); \
register int c = p[i]; \
if (c == '\"' || c == '\\') \
putc ('\\', asm_out_file); \
- if (c >= ' ' && c < 0177) \
+ if (ISPRINT(c)) \
putc (c, asm_out_file); \
else \
{ \
The Vax assembler fails to stop reading the escape \
after three digits, so this is the only way we \
can get it to parse the data properly. */ \
- if (i < thissize - 1 \
- && p[i + 1] >= '0' && p[i + 1] <= '9') \
+ if (i < thissize - 1 && ISDIGIT(p[i + 1])) \
fprintf (asm_out_file, "\"\n\t.ascii \""); \
} \
} \
#define ASM_IDENTIFY_LANGUAGE(FILE) output_lang_identify (FILE);
#endif
#endif
+
+/* This is how we tell the assembler to equate two values. */
+#ifdef SET_ASM_OP
+#ifndef ASM_OUTPUT_DEF
+#define ASM_OUTPUT_DEF(FILE,LABEL1,LABEL2) \
+ do { fprintf ((FILE), "%s", SET_ASM_OP); \
+ assemble_name (FILE, LABEL1); \
+ fprintf (FILE, ","); \
+ assemble_name (FILE, LABEL2); \
+ fprintf (FILE, "\n"); \
+ } while (0)
+#endif
+#endif
+
+/* This is how to output a reference to a user-level label named NAME. */
+
+#ifndef ASM_OUTPUT_LABELREF
+#define ASM_OUTPUT_LABELREF(FILE,NAME) asm_fprintf ((FILE), "%U%s", (NAME))
+#endif
+
+/* Allow target to print debug info labels specially. This is useful for
+ VLIW targets, since debug info labels should go into the middle of
+ instruction bundles instead of breaking them. */
+
+#ifndef ASM_OUTPUT_DEBUG_LABEL
+#define ASM_OUTPUT_DEBUG_LABEL(FILE, PREFIX, NUM) \
+ ASM_OUTPUT_INTERNAL_LABEL (FILE, PREFIX, NUM)
+#endif
+
+/* This determines whether or not we support weak symbols. */
+#ifndef SUPPORTS_WEAK
+#ifdef ASM_WEAKEN_LABEL
+#define SUPPORTS_WEAK 1
+#else
+#define SUPPORTS_WEAK 0
+#endif
+#endif
+
+/* If the target supports weak symbols, define TARGET_ATTRIBUTE_WEAK to
+ provide a weak attribute. Else define it to nothing.
+
+ This would normally belong in gansidecl.h, but SUPPORTS_WEAK is
+ not available at that time.
+
+ Note, this is only for use by target files which we know are to be
+ compiled by GCC. */
+#ifndef TARGET_ATTRIBUTE_WEAK
+# if SUPPORTS_WEAK
+# define TARGET_ATTRIBUTE_WEAK __attribute__ ((weak))
+# else
+# define TARGET_ATTRIBUTE_WEAK
+# endif
+#endif
+
+/* If we have a definition of INCOMING_RETURN_ADDR_RTX, assume that
+ the rest of the DWARF 2 frame unwind support is also provided. */
+#if !defined (DWARF2_UNWIND_INFO) && defined (INCOMING_RETURN_ADDR_RTX)
+#define DWARF2_UNWIND_INFO 1
+#endif
+
+#if defined (DWARF2_UNWIND_INFO) && !defined (EH_FRAME_SECTION)
+# if defined (EH_FRAME_SECTION_ASM_OP)
+# define EH_FRAME_SECTION() eh_frame_section();
+# else
+ /* If we aren't using crtstuff to run ctors, don't use it for EH. */
+# if defined (ASM_OUTPUT_SECTION_NAME) && defined (ASM_OUTPUT_CONSTRUCTOR)
+# define EH_FRAME_SECTION_ASM_OP "\t.section\t.eh_frame,\"aw\""
+# define EH_FRAME_SECTION() \
+ do { named_section (NULL_TREE, ".eh_frame", 0); } while (0)
+# endif
+# endif
+#endif
+
+/* By default, we generate a label at the beginning and end of the
+ text section, and compute the size of the text section by
+ subtracting the two. However, on some platforms that doesn't
+ work, and we use the section itself, rather than a label at the
+ beginning of it, to indicate the start of the section. On such
+ platforms, define this to zero. */
+#ifndef DWARF2_GENERATE_TEXT_SECTION_LABEL
+#define DWARF2_GENERATE_TEXT_SECTION_LABEL 1
+#endif
+
+/* Supply a default definition for PROMOTE_PROTOTYPES. */
+#ifndef PROMOTE_PROTOTYPES
+#define PROMOTE_PROTOTYPES 0
+#endif
+
+/* Number of hardware registers that go into the DWARF-2 unwind info.
+ If not defined, equals FIRST_PSEUDO_REGISTER */
+
+#ifndef DWARF_FRAME_REGISTERS
+#define DWARF_FRAME_REGISTERS FIRST_PSEUDO_REGISTER
+#endif
+
+/* Default sizes for base C types. If the sizes are different for
+ your target, you should override these values by defining the
+ appropriate symbols in your tm.h file. */
+
+#ifndef CHAR_TYPE_SIZE
+#define CHAR_TYPE_SIZE BITS_PER_UNIT
+#endif
+
+#ifndef SHORT_TYPE_SIZE
+#define SHORT_TYPE_SIZE (BITS_PER_UNIT * MIN ((UNITS_PER_WORD + 1) / 2, 2))
+#endif
+
+#ifndef INT_TYPE_SIZE
+#define INT_TYPE_SIZE BITS_PER_WORD
+#endif
+
+#ifndef LONG_TYPE_SIZE
+#define LONG_TYPE_SIZE BITS_PER_WORD
+#endif
+
+#ifndef LONG_LONG_TYPE_SIZE
+#define LONG_LONG_TYPE_SIZE (BITS_PER_WORD * 2)
+#endif
+
+#ifndef WCHAR_TYPE_SIZE
+#define WCHAR_TYPE_SIZE INT_TYPE_SIZE
+#endif
+
+#ifndef WCHAR_UNSIGNED
+#define WCHAR_UNSIGNED 0
+#endif
+
+#ifndef FLOAT_TYPE_SIZE
+#define FLOAT_TYPE_SIZE BITS_PER_WORD
+#endif
+
+#ifndef DOUBLE_TYPE_SIZE
+#define DOUBLE_TYPE_SIZE (BITS_PER_WORD * 2)
+#endif
+
+#ifndef LONG_DOUBLE_TYPE_SIZE
+#define LONG_DOUBLE_TYPE_SIZE (BITS_PER_WORD * 2)
+#endif
+
+#endif /* GCC_DEFAULTS_H */
+
OSDN Git Service
