|| (HARD_REGISTER_NUM_P (N) \
&& FIXED_REGNO_P (N) && REGNO_REG_CLASS (N) != NO_REGS))
-#define COST(X) (REG_P (X) ? 0 : notreg_cost (X, SET))
-#define COST_IN(X,OUTER) (REG_P (X) ? 0 : notreg_cost (X, OUTER))
+#define COST(X) (REG_P (X) ? 0 : notreg_cost (X, SET, 1))
+#define COST_IN(X, OUTER, OPNO) (REG_P (X) ? 0 : notreg_cost (X, OUTER, OPNO))
/* Get the number of times this register has been updated in this
basic block. */
static sbitmap cse_visited_basic_blocks;
static bool fixed_base_plus_p (rtx x);
-static int notreg_cost (rtx, enum rtx_code);
+static int notreg_cost (rtx, enum rtx_code, int);
static int approx_reg_cost_1 (rtx *, void *);
static int approx_reg_cost (rtx);
static int preferable (int, int, int, int);
enum machine_mode);
static void merge_equiv_classes (struct table_elt *, struct table_elt *);
static void invalidate (rtx, enum machine_mode);
-static bool cse_rtx_varies_p (const_rtx, bool);
static void remove_invalid_refs (unsigned int);
static void remove_invalid_subreg_refs (unsigned int, unsigned int,
enum machine_mode);
from COST macro to keep it simple. */
static int
-notreg_cost (rtx x, enum rtx_code outer)
+notreg_cost (rtx x, enum rtx_code outer, int opno)
{
return ((GET_CODE (x) == SUBREG
&& REG_P (SUBREG_REG (x))
&& TRULY_NOOP_TRUNCATION_MODES_P (GET_MODE (x),
GET_MODE (SUBREG_REG (x))))
? 0
- : rtx_cost (x, outer, optimize_this_for_speed_p) * 2);
+ : rtx_cost (x, outer, opno, optimize_this_for_speed_p) * 2);
}
\f
/* Put it after the last element cheaper than X. */
struct table_elt *p, *next;
- for (p = classp; (next = p->next_same_value) && CHEAPER (next, elt);
- p = next);
+ for (p = classp;
+ (next = p->next_same_value) && CHEAPER (next, elt);
+ p = next)
+ ;
/* Put it after P and before NEXT. */
elt->next_same_value = next;
{
struct check_dependence_data *d = (struct check_dependence_data *) data;
if (*x && MEM_P (*x))
- return canon_true_dependence (d->exp, d->mode, d->addr, *x, NULL_RTX,
- cse_rtx_varies_p);
+ return canon_true_dependence (d->exp, d->mode, d->addr, *x, NULL_RTX);
else
return 0;
}
Store 1 in DO_NOT_RECORD_P if any subexpression is volatile.
If HASH_ARG_IN_MEMORY_P is not NULL, store 1 in it if X contains
- a MEM rtx which does not have the RTX_UNCHANGING_P bit set.
+ a MEM rtx which does not have the MEM_READONLY_P flag set.
Note that cse_insn knows that the hash code of a MEM expression
is just (int) MEM plus the hash code of the address. */
/* Hash an rtx X for cse via hash_rtx.
Stores 1 in do_not_record if any subexpression is volatile.
Stores 1 in hash_arg_in_memory if X contains a mem rtx which
- does not have the RTX_UNCHANGING_P bit set. */
+ does not have the MEM_READONLY_P flag set. */
static inline unsigned
canon_hash (rtx x, enum machine_mode mode)
return 1;
}
\f
-/* Return 1 if X has a value that can vary even between two
- executions of the program. 0 means X can be compared reliably
- against certain constants or near-constants. */
-
-static bool
-cse_rtx_varies_p (const_rtx x, bool from_alias)
-{
- /* We need not check for X and the equivalence class being of the same
- mode because if X is equivalent to a constant in some mode, it
- doesn't vary in any mode. */
-
- if (REG_P (x)
- && REGNO_QTY_VALID_P (REGNO (x)))
- {
- int x_q = REG_QTY (REGNO (x));
- struct qty_table_elem *x_ent = &qty_table[x_q];
-
- if (GET_MODE (x) == x_ent->mode
- && x_ent->const_rtx != NULL_RTX)
- return 0;
- }
-
- if (GET_CODE (x) == PLUS
- && CONST_INT_P (XEXP (x, 1))
- && REG_P (XEXP (x, 0))
- && REGNO_QTY_VALID_P (REGNO (XEXP (x, 0))))
- {
- int x0_q = REG_QTY (REGNO (XEXP (x, 0)));
- struct qty_table_elem *x0_ent = &qty_table[x0_q];
-
- if ((GET_MODE (XEXP (x, 0)) == x0_ent->mode)
- && x0_ent->const_rtx != NULL_RTX)
- return 0;
- }
-
- /* This can happen as the result of virtual register instantiation, if
- the initial constant is too large to be a valid address. This gives
- us a three instruction sequence, load large offset into a register,
- load fp minus a constant into a register, then a MEM which is the
- sum of the two `constant' registers. */
- if (GET_CODE (x) == PLUS
- && REG_P (XEXP (x, 0))
- && REG_P (XEXP (x, 1))
- && REGNO_QTY_VALID_P (REGNO (XEXP (x, 0)))
- && REGNO_QTY_VALID_P (REGNO (XEXP (x, 1))))
- {
- int x0_q = REG_QTY (REGNO (XEXP (x, 0)));
- int x1_q = REG_QTY (REGNO (XEXP (x, 1)));
- struct qty_table_elem *x0_ent = &qty_table[x0_q];
- struct qty_table_elem *x1_ent = &qty_table[x1_q];
-
- if ((GET_MODE (XEXP (x, 0)) == x0_ent->mode)
- && x0_ent->const_rtx != NULL_RTX
- && (GET_MODE (XEXP (x, 1)) == x1_ent->mode)
- && x1_ent->const_rtx != NULL_RTX)
- return 0;
- }
-
- return rtx_varies_p (x, from_alias);
-}
-\f
/* Subroutine of canon_reg. Pass *XLOC through canon_reg, and validate
the result if necessary. INSN is as for canon_reg. */
if (! exp_equiv_p (p->exp, p->exp, 1, false))
continue;
+ /* If it's the same comparison we're already looking at, skip it. */
+ if (COMPARISON_P (p->exp)
+ && XEXP (p->exp, 0) == arg1
+ && XEXP (p->exp, 1) == arg2)
+ continue;
+
if (GET_CODE (p->exp) == COMPARE
/* Another possibility is that this machine has a compare insn
that includes the comparison code. In that case, ARG1 would
argument. */
if (const_arg != 0
&& const_arg != folded_arg
- && COST_IN (const_arg, code) <= COST_IN (folded_arg, code)
+ && COST_IN (const_arg, code, i) <= COST_IN (folded_arg, code, i)
/* It's not safe to substitute the operand of a conversion
operator with a constant, as the conversion's identity